summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2010-05-12[ARM] msm: add new vreg IDs for MSM7X30Willie Ruan
Signed-off-by: Willie Ruan <wruan@quicinc.com>
2010-05-12arm: msm: add vreg reference countMatt Wilson
Support independent enable and disable by clients for common vreg. First enable switches on and last disable switches off. This change has no check for voltage level so clients must agree on level for common vreg. Signed-off-by: Matthew Wilson <mtwilson@quicinc.com>
2010-05-12arm: msm: warning fix in acpuclock.cDaniel Walker
Fixes the following warning, arch/arm/mach-msm/acpuclock-arm11.c:138: warning: 'freq_table' defined but not used when CONFIG_CPU_FREQ_TABLE is not enabled. Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12arm: msm: status for vregSteve Muckle
Keep track of the success/failure of the last vreg proc comm command, and return that on debugfs reads. Signed-off-by: Steve Muckle <smuckle@quicinc.com>
2010-05-12arm: msm: return error pointer in vreg_get if vreg not foundSteve Muckle
Signed-off-by: Steve Muckle <smuckle@quicinc.com>
2010-05-12arm: msm: move board-dream.c to board-trout.cDaniel Walker
Move the naming of this board file back to the original Google naming. Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12arm: msm: add cpu frequency controlsDaniel Walker
This adds acpuclock-arm11.c from Google. This provides control over the cpu frequency for arm11 cpu's. This has shared authorship between Google, and Qualcomm. Most of it was written by Mike Chan at Google. Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12msm: add dsb() syncronization to datamover driverBrian Swetland
Avoids problems on the scorpion core. Signed-off-by: Brian Swetland <swetland@google.com>
2010-05-12[ARM] msm: dma: Enable dma clock while dma is activeArve Hjønnevåg
Signed-off-by: Arve Hjønnevåg <arve@android.com>
2010-05-12[ARM] msm: dma: disable_irq -> disable_irq_nosyncArve Hjønnevåg
Signed-off-by: Arve Hjønnevåg <arve@android.com>
2010-05-12[ARM] msm: Update list of proc_comm enums.Dima Zavin
Signed-off-by: Dima Zavin <dima@android.com>
2010-05-12[ARM] msm: irq: fix lockdep issuesArve Hjønnevåg
Signed-off-by: Brian Swetland <swetland@google.com>
2010-05-12[ARM] msm: Add MSM_DEBUG_UART option.Arve Hjønnevåg
Signed-off-by: Arve Hjønnevåg <arve@android.com>
2010-05-12[ARM] msm: halibut: Add memory configuration.Arve Hjønnevåg
2010-05-12arm: msm: add board file for QSD8x50 SURF and FFADaniel Walker
This adds a basic board file without Kconfig changes. Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12arm: msm: add board file for MSM7x30 SURF and FFADaniel Walker
This adds a basic board file without Kconfig changes. Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12arm: msm: add board file for MSM7x25/MSM7x27 SURF and FFADaniel Walker
This adds a basic board file without Kconfig changes. Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-12arm: msm: add board file for the HTC Sapphire deviceDaniel Walker
This adds a basic board file without Kconfig changes. Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-07Revert "arm: msm: add oprofile pmu support"Daniel Walker
This reverts commit ee3c454b8da04815c1884ed85fe89d2d131c0e51. As request by Russell King. Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-03arm: mm: qsd8x50: Fix incorrect permission faultsDave Estes
Handle incorrectly reported permission faults for qsd8650. On permission faults, retry MVA to PA conversion. If retry detects translation fault. Report as translation fault. Cc: Jamie Lokier <jamie@shareable.org> Signed-off-by: Dave Estes <cestes@quicinc.com>
2010-05-03arm: msm: add oprofile pmu supportDaniel Walker
add oprofile pmu support for msm. Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-05-03arm: msm: define HAVE_CLK for ARCH_MSMSteve Muckle
MSM supports the <linux/clk.h> interface. Acked-by: David Brown <davidb@quicinc.com> Signed-off-by: Steve Muckle <smuckle@quicinc.com>
2010-05-03arm: msm: allow ARCH_MSM to have v7 cpusDaniel Walker
ARCH_MSM supports armv7 cpus, so we're pushed the CPU_V6/CPU_V7 selection down into the arch/arm/mach-msm/Kconfig. Also update the description to be a bit more accurate. Signed-off-by: Daniel Walker <dwalker@codeaurora.org>
2010-04-30musb: fix power field to hold all possible valuesAjay Kumar Gupta
MUSB can supply upto 500mA such as, AM3517 and OMAP3EVM Rev >=E and thus the 'power' field has to hold values above 255. Signed-off-by: Ajay Kumar Gupta <ajay.gupta@ti.com> Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2010-04-30Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6061/1: PL061 GPIO: Bug fix - setting gpio for HIGH_LEVEL interrupt is not working. ARM: 5957/1: ARM: RealView SD/MMC Card detection and write-protect using GPIOLIB ARM: 6030/1: KS8695: enable console ARM: 6060/1: PL061 GPIO: Setting gpio val after changing direction to OUT. ARM: 6059/1: PL061 GPIO: Changing *_irq_chip_data with *_irq_data for real irqs. ARM: 6023/1: update bcmring_defconfig to latest version and fix build error ARM: fix build error in arch/arm/kernel/process.c
2010-04-28ARM: 5957/1: ARM: RealView SD/MMC Card detection and write-protect using GPIOLIBColin Tuckley
The switch to using GPIOLIB broke the sd/mmc card detection on the RealView development boards if GPIO_PL061 was not selected. This patch selects GPIO_PL061 if GPIOLIB is selected. The sense of the return value from mmc_status has also changed and is corrected. Signed-off-by: Colin Tuckley <colin.tuckley@arm.com> Acked-by: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-27Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (39 commits) omap: delete unused bootloader tag variables omap: Devkit8000: Remove unused pins omap: Devkit8000: Change position of init calls omap: Devkit8000: Remove unnecessary include file omap: Devkit8000: Fix typo in pin name omap: Devkit8000: Add missing package selection omap: Devkit8000: Fix typo in supplies n8x0_defconfig: remove CONFIG_NILFS2_FS override omap: board-sdp-flash.c: Fix typos in debug output omap4: Fix McBSP4 base address omap: rx51_defconfig: Remove CONFIG_SYSFS_DEPRECATED*=y options omap: rx51_defconfig: Remove duplicate phonet omap: fix a gpmc nand problem AM3517: initialize i2c subsystem after mux subsystem omap: remove one of the define of INT_34XX_BENCH_MPU_EMUL omap: fix the compile error if CONFIG_MTD_NAND_OMAP2 is notenabled OMAP4: Clocks: Change SPI Instance Names omap: Devkit8000: Fix wrong usb port on Devkit8000 OMAP4: Fix for CONTROL register Base OMAP4-HSMMC: FIX for MMC5 Controller IRQ Base ...
2010-04-23omap: delete unused bootloader tag variablesAaro Koskinen
They are not needed and add over 512 bytes to kernel data. Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Remove unused pinsThomas Weber
Old code from original patch contains beagle board pins that are not available on the Devkit8000. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Change position of init callsThomas Weber
Change position of calling serial and ethernet initialization. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Remove unnecessary include fileThomas Weber
Remove include otg.h. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Fix typo in pin nameThomas Weber
Replace wrong sdr_cke[01] with sdrc_cke[01]. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Add missing package selectionThomas Weber
Devkit8000 uses the CUS package for OMAP3530. This patch adds missing package selection for CUS and enables CONFIG_MUX. Replace whitespace with tab in Kconfig. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Fix typo in suppliesThomas Weber
Replace wrong vdss_dsi with vdds_dsi. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23n8x0_defconfig: remove CONFIG_NILFS2_FS overrideFrancisco Alecrim
arch/arm/configs/n8x0_defconfig:1061:warning: override: reassigning to symbol NILFS2_FS Signed-off-by: Francisco Alecrim <francisco.alecrim@openbossa.org> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: board-sdp-flash.c: Fix typos in debug outputThomas Weber
Corrected type of flash in output (OneNAND => NOR). Removed whitespace after newline in output. Removed double whitespace in output. Signed-off-by: Thomas Weber <weber@corscience.de> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap4: Fix McBSP4 base addressSantosh Shilimkar
This patch fixes the McBSP4 base address for OMAP4 Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: rx51_defconfig: Remove CONFIG_SYSFS_DEPRECATED*=y optionsJarkko Nikula
Modern udev will not work with the CONFIG_SYSFS_DEPRECATED*=y options and it seems also that the Maemo release works without when testing with the Maemo 2.6.28 kernel. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: rx51_defconfig: Remove duplicate phonetJarkko Nikula
Phonet is enabled by the commit bce54fed941e03695ab557100a4bd1e457abca42 and this duplicate gives a warning when doing make rx51_defconfig. Signed-off-by: Jarkko Nikula <jhnikula@gmail.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: fix a gpmc nand problemstanley.miao
If gpmc_t isn't given, we don't need to set timing for gpmc, or it will cause a Oops. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23AM3517: initialize i2c subsystem after mux subsystemstanley.miao
The initialize of i2c subsystem will set pinmux, so it should be done after the initialize of mux subsystem initialization. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: remove one of the define of INT_34XX_BENCH_MPU_EMULstanley.miao
INT_34XX_BENCH_MPU_EMUL was defined twice, another is at Line 312. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: fix the compile error if CONFIG_MTD_NAND_OMAP2 is notenabledstanley.miao
If CONFIG_MTD_NAND_OMAP2 is not enabled, there will be a compile error, "gpmc_nand_init() is not defined". Add a inline noop function to fix it. Signed-off-by: Stanley.Miao <stanley.miao@windriver.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23OMAP4: Clocks: Change SPI Instance NamesAbraham Arce
Change the name for the spi instances on omap44xx_clks to match the names omap2 spi driver gives: omap-mcspi.1 -> omap2_mcspi.1 omap-mcspi.2 -> omap2_mcspi.2 omap-mcspi.3 -> omap2_mcspi.3 omap-mcspi.4 -> omap2_mcspi.4 Signed-off-by: Abraham Arce <x0066660@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Devkit8000: Fix wrong usb port on Devkit8000Thomas Weber
Disable the nonexistent ehci port on Devkit8000. Signed-off-by: Thomas Weber <weber@corscience.de> Acked-by: Anand Gadiyar <gadiyar@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23OMAP4: Fix for CONTROL register BaseSantosh Shilimkar
This patch fixes the base address of CONTROL register on OMAP4430SDP. The control base is used by peripherals like MMC1 for PBIAS configuration. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23OMAP4-HSMMC: FIX for MMC5 Controller IRQ Basekishore kadiyala
This patch fixes HSMMC Controller5 IRQ Base. Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap3: Fix EHCI port for IGEP v2 boardEnric Balletbo i Serra
IGEP v2 uses EHCI port 1 instead of EHCI port 2. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Felipe Balbi <felipe.balbi@nokia.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap: Fix n8x0 mmc_mmc_init compile warnings and typosTony Lindgren
Fix warning: 'return' with a value, in function returning void in n8x0_mmc_init. Also fix a search and replace typo. Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-04-23omap2: Fix ARM processor check for 24xxTony Lindgren
The value to check is 7 for V6 instead. The code has been working as it falls through to 24xx code if the other checks fail. Signed-off-by: Tony Lindgren <tony@atomide.com>
generated by cgit v0.10.2 at 2024-11-06 05:31:35 (GMT)