summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2012-08-02Merge tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc Marvell Orion device-tree updates from Olof Johansson: "This contains a set of device-tree conversions for Marvell Orion platforms that were staged early but took a few tries to get the branch into a format where it was suitable for us to pick up. Given that most people working on these platforms are hobbyists with limited time, we were a bit more flexible with merging it even though it came in late." * tag 'dt2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (21 commits) ARM: Kirkwood: Replace mrvl with marvell ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT. ARM: Kirkwood: Describe Dreamplug LEDs in DT. ARM: Kirkwood: Describe iConnects LEDs in DT. ARM: Kirkwood: Describe iConnects temperature sensor in DT. ARM: Kirkwood: Describe IB62x0 LEDs in DT. ARM: Kirkwood: Describe IB62x0 gpio-keys in DT. ARM: Kirkwood: Describe DNS32? gpio-keys in DT. ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings ARM: Kirkwood: Describe DNS325 temperature sensor in DT. ARM: Kirkwood: Use DT to configure SATA device. ARM: kirkwood: use devicetree for SPI on dreamplug ARM: kirkwood: Add LS-XHL and LS-CHLv2 support ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net ARM: Kirkwood: Add basic device tree support for QNAP TS219. ATA: sata_mv: Add device tree support ARM: Orion: DTify the watchdog timer. ARM: Orion: Add arch support needed for I2C via DT. ARM: kirkwood: use devicetree for orion-spi ... Conflicts: drivers/watchdog/orion_wdt.c
2012-08-02Merge tag 'pm2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc cpuidle enablement for OMAP from Olof Johansson: "Coupled cpuidle was meant to merge for 3.5 through Len Brown's tree, but didn't go in because the pull request ended up rejected. So it just got merged, and we got this staged branch that enables the coupled cpuidle code on OMAP. With a stable git workflow from the other maintainer we could have staged this earlier, but that wasn't the case so we have had to merge it late. The alternative is to hold it off until 3.7 but given that the code is well-isolated to OMAP and they are eager to see it go in, I didn't push back hard in that direction." * tag 'pm2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: OMAP4: CPUidle: Open broadcast clock-event device. ARM: OMAP4: CPUidle: add synchronization for coupled idle states ARM: OMAP4: CPUidle: Use coupled cpuidle states to implement SMP cpuidle. ARM: OMAP: timer: allow gp timer clock-event to be used on both cpus
2012-08-02Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull ARM SoC fixes from Olof Johansson: "A few fixes for merge window fallout, and a bugfix for timer resume on PRIMA2." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: ARM: mmp: add missing irqs.h arm: mvebu: fix typo in .dtsi comment for Armada XP SoCs ARM: PRIMA2: delete redundant codes to restore LATCHED when timer resumes ARM: mxc: Include missing irqs.h header
2012-08-02ARM: mmp: add missing irqs.hHaojian Zhuang
arch/arm/mach-mmp/gplugd.c:195:13: error: ‘MMP_NR_IRQS’ undeclared here (not in a function) make[1]: *** [arch/arm/mach-mmp/gplugd.o] Error 1 Include <mach/irqs.h> to fix this issue. Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-08-02arm: mvebu: fix typo in .dtsi comment for Armada XP SoCsThomas Petazzoni
The comment was wrongly referring to Armada 370 while the file is related to Armada XP. Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-08-02ARM: PRIMA2: delete redundant codes to restore LATCHED when timer resumesBarry Song
The only way to write LATCHED registers to write LATCH_BIT to LATCH register, that will latch COUNTER into LATCHED.e.g. writel_relaxed(SIRFSOC_TIMER_LATCH_BIT, sirfsoc_timer_base + SIRFSOC_TIMER_LATCH); Writing values to LATCHED registers directly is useless at all. Signed-off-by: Barry Song <Baohua.Song@csr.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-08-01Merge branch 'dmaengine' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM DMA engine updates from Russell King: "This looks scary at first glance, but what it is is: - a rework of the sa11x0 DMA engine driver merged during the previous cycle, to extract a common set of helper functions for DMA engine implementations. - conversion of amba-pl08x.c to use these helper functions. - addition of OMAP DMA engine driver (using these helper functions), and conversion of some of the OMAP DMA users to use DMA engine. Nothing in the helper functions is ARM specific, so I hope that other implementations can consolidate some of their code by making use of these helpers. This has been sitting in linux-next most of the merge cycle, and has been tested by several OMAP folk. I've tested it on sa11x0 platforms, and given it my best shot on my broken platforms which have the amba-pl08x controller. The last point is the addition to feature-removal-schedule.txt, which will have a merge conflict. Between myself and TI, we're planning to remove the old TI DMA implementation next year." Fix up trivial add/add conflicts in Documentation/feature-removal-schedule.txt and drivers/dma/{Kconfig,Makefile} * 'dmaengine' of git://git.linaro.org/people/rmk/linux-arm: (53 commits) ARM: 7481/1: OMAP2+: omap2plus_defconfig: enable OMAP DMA engine ARM: 7464/1: mmc: omap_hsmmc: ensure probe returns error if DMA channel request fails Add feature removal of old OMAP private DMA implementation mtd: omap2: remove private DMA API implementation mtd: omap2: add DMA engine support spi: omap2-mcspi: remove private DMA API implementation spi: omap2-mcspi: add DMA engine support ARM: omap: remove mmc platform data dma_mask and initialization mmc: omap: remove private DMA API implementation mmc: omap: add DMA engine support mmc: omap_hsmmc: remove private DMA API implementation mmc: omap_hsmmc: add DMA engine support dmaengine: omap: add support for cyclic DMA dmaengine: omap: add support for setting fi dmaengine: omap: add support for returning residue in tx_state method dmaengine: add OMAP DMA engine driver dmaengine: sa11x0-dma: add cyclic DMA support dmaengine: sa11x0-dma: fix DMA residue support dmaengine: PL08x: ensure all descriptors are freed when channel is released dmaengine: PL08x: get rid of write only pool_ctr and free_txd locking ...
2012-08-01Merge branch 'audit' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM audit/signal updates from Russell King: "ARM audit/signal handling updates from Al and Will. This improves on the work Viro did last merge window, and sorts out some of the issues found with that work." * 'audit' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7475/1: sys_trace: allow all syscall arguments to be updated via ptrace ARM: 7474/1: get rid of TIF_SYSCALL_RESTARTSYS ARM: 7473/1: deal with handlerless restarts without leaving the kernel ARM: 7472/1: pull all work_pending logics into C function ARM: 7471/1: Revert "7442/1: Revert "remove unused restart trampoline"" ARM: 7470/1: Revert "7443/1: Revert "new way of handling ERESTART_RESTARTBLOCK""
2012-08-01Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-armLinus Torvalds
Pull ARM fixes from Russell King: "This fixes various issues found during July" * 'fixes' of git://git.linaro.org/people/rmk/linux-arm: ARM: 7479/1: mm: avoid NULL dereference when flushing gate_vma with VIVT caches ARM: Fix undefined instruction exception handling ARM: 7480/1: only call smp_send_stop() on SMP ARM: 7478/1: errata: extend workaround for erratum #720789 ARM: 7477/1: vfp: Always save VFP state in vfp_pm_suspend on UP ARM: 7476/1: vfp: only clear vfp state for current cpu in vfp_pm_suspend ARM: 7468/1: ftrace: Trace function entry before updating index ARM: 7467/1: mutex: use generic xchg-based implementation for ARMv6+ ARM: 7466/1: disable interrupt before spinning endlessly ARM: 7465/1: Handle >4GB memory sizes in device tree and mem=size@start option
2012-08-01Merge tag 'fbdev-updates-for-3.6' of git://github.com/schandinat/linux-2.6Linus Torvalds
Pull fbdev updates from Florian Tobias Schandinat: - large updates for OMAP - support for LCD3 overlay manager (omap5) - omapdss output cleanup - removal of passive matrix LCD support as there are no drivers for such panels for DSS or DSS2 and nobody complained (cleanup) - large updates for SH Mobile - overlay support - separating MERAM (cache) from framebuffer driver - some updates for Exynos and da8xx-fb - various other small patches * tag 'fbdev-updates-for-3.6' of git://github.com/schandinat/linux-2.6: (78 commits) da8xx-fb: fix compile issue due to missing include fbdev: Make pixel_to_pat() failure mode more friendly da8xx-fb: do not turn ON LCD backlight unless LCDC is enabled fbdev: sh_mobile_lcdc: Fix vertical panning step video: exynos mipi dsi: Fix mipi dsi regulators handling issue video: da8xx-fb: do clock reset of revision 2 LCDC before enabling arm: da850: configure LCDC fifo threshold video: da8xx-fb: configure FIFO threshold to reduce underflow errors video: da8xx-fb: fix flicker due to 1 frame delay in updated frame video: da8xx-fb rev2: fix disabling of palette completion interrupt da8xx-fb: add missing FB_BLANK operations video: exynos_dp: use usleep_range instead of delay video: exynos_dp: check the only INTERLANE_ALIGN_DONE bit during Link Training fb: epson1355fb: Fix section mismatch video: exynos_dp: fix wrong DPCD address during Link Training video/smscufx: fix line counting in fb_write aty128fb: Fix coding style issues fbdev: sh_mobile_lcdc: Fix pan offset computation in YUV mode fbdev: sh_mobile_lcdc: Fix overlay registers update during pan operation fbdev: sh_mobile_lcdc: Support horizontal panning ...
2012-08-01Merge tag 'random_for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random Pull random subsystem patches from Ted Ts'o: "This patch series contains a major revamp of how we collect entropy from interrupts for /dev/random and /dev/urandom. The goal is to addresses weaknesses discussed in the paper "Mining your Ps and Qs: Detection of Widespread Weak Keys in Network Devices", by Nadia Heninger, Zakir Durumeric, Eric Wustrow, J. Alex Halderman, which will be published in the Proceedings of the 21st Usenix Security Symposium, August 2012. (See https://factorable.net for more information and an extended version of the paper.)" Fix up trivial conflicts due to nearby changes in drivers/{mfd/ab3100-core.c, usb/gadget/omap_udc.c} * tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random: (33 commits) random: mix in architectural randomness in extract_buf() dmi: Feed DMI table to /dev/random driver random: Add comment to random_initialize() random: final removal of IRQF_SAMPLE_RANDOM um: remove IRQF_SAMPLE_RANDOM which is now a no-op sparc/ldc: remove IRQF_SAMPLE_RANDOM which is now a no-op [ARM] pxa: remove IRQF_SAMPLE_RANDOM which is now a no-op board-palmz71: remove IRQF_SAMPLE_RANDOM which is now a no-op isp1301_omap: remove IRQF_SAMPLE_RANDOM which is now a no-op pxa25x_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op omap_udc: remove IRQF_SAMPLE_RANDOM which is now a no-op goku_udc: remove IRQF_SAMPLE_RANDOM which was commented out uartlite: remove IRQF_SAMPLE_RANDOM which is now a no-op drivers: hv: remove IRQF_SAMPLE_RANDOM which is now a no-op xen-blkfront: remove IRQF_SAMPLE_RANDOM which is now a no-op n2_crypto: remove IRQF_SAMPLE_RANDOM which is now a no-op pda_power: remove IRQF_SAMPLE_RANDOM which is now a no-op i2c-pmcmsp: remove IRQF_SAMPLE_RANDOM which is now a no-op input/serio/hp_sdc.c: remove IRQF_SAMPLE_RANDOM which is now a no-op mfd: remove IRQF_SAMPLE_RANDOM which is now a no-op ...
2012-07-31Merge branches 'dma-omap', 'dma-pl08x' and 'dma-sa11x0' into dmaengineRussell King
2012-07-31ARM: 7481/1: OMAP2+: omap2plus_defconfig: enable OMAP DMA engineJavier Martinez Canillas
commit 13f30fc893e4610f67dd7a8b0b67aec02eac1775 Author: Russell King <rmk+kernel@arm.linux.org.uk> Date: Sat Apr 21 22:41:10 2012 +0100 mmc: omap: remove private DMA API implementation removed the private DMA API implementation from the OMAP mmc host to exclusively use the DMA engine API. Unfortunately OMAP MMC and High Speed MMC host drivers don't support poll mode and only works with DMA. Since omap2plus_defconfig doesn't enable this feature by default, the following error is happens on an IGEPv2 Rev.C (and probably on most OMAP boards with MMC support): [ 2.199981] omap_hsmmc omap_hsmmc.1: unable to obtain RX DMA engine channel 48 [ 2.215087] omap_hsmmc omap_hsmmc.0: unable to obtain RX DMA engine channel 62 Signed-off-by: Javier Martinez Canillas <javier@dowhile0.org> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-31ARM: omap: remove mmc platform data dma_mask and initializationRussell King
DMAengine uses the DMA engine device structure when mapping/unmapping memory for DMA, so the MMC devices do not need their DMA masks initialized (this reflects hardware: the MMC device is not the device doing DMA.) Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-31ARM: 7479/1: mm: avoid NULL dereference when flushing gate_vma with VIVT cachesWill Deacon
The vivt_flush_cache_{range,page} functions check that the mm_struct of the VMA being flushed has been active on the current CPU before performing the cache maintenance. The gate_vma has a NULL mm_struct pointer and, as such, will cause a kernel fault if we try to flush it with the above operations. This happens during ELF core dumps, which include the gate_vma as it may be useful for debugging purposes. This patch adds checks to the VIVT cache flushing functions so that VMAs with a NULL mm_struct are flushed unconditionally (the vectors page may be dirty if we use it to store the current TLS pointer). Cc: <stable@vger.kernel.org> # 3.4+ Reported-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org> Tested-by: Uros Bizjak <ubizjak@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-31ARM: Fix undefined instruction exception handlingRussell King
While trying to get a v3.5 kernel booted on the cubox, I noticed that VFP does not work correctly with VFP bounce handling. This is because of the confusion over 16-bit vs 32-bit instructions, and where PC is supposed to point to. The rule is that FP handlers are entered with regs->ARM_pc pointing at the _next_ instruction to be executed. However, if the exception is not handled, regs->ARM_pc points at the faulting instruction. This is easy for ARM mode, because we know that the next instruction and previous instructions are separated by four bytes. This is not true of Thumb2 though. Since all FP instructions are 32-bit in Thumb2, it makes things easy. We just need to select the appropriate adjustment. Do this by moving the adjustment out of do_undefinstr() into the assembly code, as only the assembly code knows whether it's dealing with a 32-bit or 16-bit instruction. Cc: <stable@vger.kernel.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-31ARM: 7480/1: only call smp_send_stop() on SMPJavier Martinez Canillas
On reboot or poweroff (machine_shutdown()) a call to smp_send_stop() is made (to stop the others CPU's) when CONFIG_SMP=y. arch/arm/kernel/process.c: void machine_shutdown(void) { #ifdef CONFIG_SMP smp_send_stop(); #endif } smp_send_stop() calls the function pointer smp_cross_call(), which is set on the smp_init_cpus() function for OMAP processors. arch/arm/mach-omap2/omap-smp.c: void __init smp_init_cpus(void) { ... set_smp_cross_call(gic_raise_softirq); ... } But the ARM setup_arch() function only calls smp_init_cpus() if CONFIG_SMP=y && is_smp(). arm/kernel/setup.c: void __init setup_arch(char **cmdline_p) { ... #ifdef CONFIG_SMP if (is_smp()) smp_init_cpus(); #endif ... } Newer OMAP CPU's are SMP machines so omap2plus_defconfig sets CONFIG_SMP=y. Unfortunately on an OMAP UP machine is_smp() returns false and smp_init_cpus() is never called and the smp_cross_call() function remains NULL. If the machine is rebooted or powered off, smp_send_stop() will be called (since CONFIG_SMP=y) leading to the following error: [ 42.815551] Restarting system. [ 42.819030] Unable to handle kernel NULL pointer dereference at virtual address 00000000 [ 42.827667] pgd = d7a74000 [ 42.830566] [00000000] *pgd=96ce7831, *pte=00000000, *ppte=00000000 [ 42.837249] Internal error: Oops: 80000007 [#1] SMP ARM [ 42.842773] Modules linked in: [ 42.846008] CPU: 0 Not tainted (3.5.0-rc3-next-20120622-00002-g62e87ba-dirty #44) [ 42.854278] PC is at 0x0 [ 42.856994] LR is at smp_send_stop+0x4c/0xe4 [ 42.861511] pc : [<00000000>] lr : [<c00183a4>] psr: 60000013 [ 42.861511] sp : d6c85e70 ip : 00000000 fp : 00000000 [ 42.873626] r10: 00000000 r9 : d6c84000 r8 : 00000002 [ 42.879150] r7 : c07235a0 r6 : c06dd2d0 r5 : 000f4241 r4 : d6c85e74 [ 42.886047] r3 : 00000000 r2 : 00000000 r1 : 00000006 r0 : d6c85e74 [ 42.892944] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment user [ 42.900482] Control: 10c5387d Table: 97a74019 DAC: 00000015 [ 42.906555] Process reboot (pid: 1166, stack limit = 0xd6c842f8) [ 42.912902] Stack: (0xd6c85e70 to 0xd6c86000) [ 42.917510] 5e60: c07235a0 00000000 00000000 d6c84000 [ 42.926177] 5e80: 01234567 c00143d0 4321fedc c00511bc d6c85ebc 00000168 00000460 00000000 [ 42.934814] 5ea0: c1017950 a0000013 c1017900 d8014390 d7ec3858 c0498e48 c1017950 00000000 [ 42.943481] 5ec0: d6ddde10 d6c85f78 00000003 00000000 d6ddde10 d6c84000 00000000 00000000 [ 42.952117] 5ee0: 00000002 00000000 00000000 c0088c88 00000002 00000000 00000000 c00f4b90 [ 42.960784] 5f00: 00000000 d6c85ebc d8014390 d7e311c8 60000013 00000103 00000002 d6c84000 [ 42.969421] 5f20: c00f3274 d6e00a00 00000001 60000013 d6c84000 00000000 00000000 c00895d4 [ 42.978057] 5f40: 00000002 d8007c80 d781f000 c00f6150 d8010cc0 c00f3274 d781f000 d6c84000 [ 42.986694] 5f60: c0013020 d6e00a00 00000001 20000010 0001257c ef000000 00000000 c00895d4 [ 42.995361] 5f80: 00000002 00000001 00000003 00000000 00000001 00000003 00000000 00000058 [ 43.003997] 5fa0: c00130c8 c0012f00 00000001 00000003 fee1dead 28121969 01234567 00000002 [ 43.012634] 5fc0: 00000001 00000003 00000000 00000058 00012584 0001257c 00000001 00000000 [ 43.021270] 5fe0: 000124bc bec5cc6c 00008f9c 4a2f7c40 20000010 fee1dead 00000000 00000000 [ 43.029968] [<c00183a4>] (smp_send_stop+0x4c/0xe4) from [<c00143d0>] (machine_restart+0xc/0x4c) [ 43.039154] [<c00143d0>] (machine_restart+0xc/0x4c) from [<c00511bc>] (sys_reboot+0x144/0x1f0) [ 43.048278] [<c00511bc>] (sys_reboot+0x144/0x1f0) from [<c0012f00>] (ret_fast_syscall+0x0/0x3c) [ 43.057464] Code: bad PC value [ 43.060760] ---[ end trace c3988d1dd0b8f0fb ]--- Add a check so smp_cross_call() is only called when there is more than one CPU on-line. Cc: <stable@vger.kernel.org> Signed-off-by: Javier Martinez Canillas <javier at dowhile0.org> Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-31ARM: 7478/1: errata: extend workaround for erratum #720789Will Deacon
Commit cdf357f1 ("ARM: 6299/1: errata: TLBIASIDIS and TLBIMVAIS operations can broadcast a faulty ASID") replaced by-ASID TLB flushing operations with all-ASID variants to workaround A9 erratum #720789. This patch extends the workaround to include the tlb_range operations, which were overlooked by the original patch. Cc: <stable@vger.kernel.org> Tested-by: Steve Capper <steve.capper@arm.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-31ARM: 7477/1: vfp: Always save VFP state in vfp_pm_suspend on UPColin Cross
vfp_pm_suspend should save the VFP state in suspend after any lazy context switch. If it only saves when the VFP is enabled, the state can get lost when, on a UP system: Thread 1 uses the VFP Context switch occurs to thread 2, VFP is disabled but the VFP context is not saved Thread 2 initiates suspend vfp_pm_suspend is called with the VFP disabled, and the unsaved VFP context of Thread 1 in the registers Modify vfp_pm_suspend to save the VFP context whenever vfp_current_hw_state is not NULL. Includes a fix from Ido Yariv <ido@wizery.com>, who pointed out that on SMP systems, the state pointer can be pointing to a freed task struct if a task exited on another cpu, fixed by using #ifndef CONFIG_SMP in the new if clause. Cc: Barry Song <bs14@csr.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Ido Yariv <ido@wizery.com> Cc: Daniel Drake <dsd@laptop.org> Cc: Will Deacon <will.deacon@arm.com> Cc: stable@vger.kernel.org Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-31ARM: 7476/1: vfp: only clear vfp state for current cpu in vfp_pm_suspendColin Cross
vfp_pm_suspend runs on each cpu, only clear the hardware state pointer for the current cpu. Prevents a possible crash if one cpu clears the hw state pointer when another cpu has already checked if it is valid. Cc: stable@vger.kernel.org Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-31ARM: 7468/1: ftrace: Trace function entry before updating indexColin Cross
Commit 722b3c74695377d11d18a52f3da08114d37f3f37 modified x86 ftrace to avoid tracing all functions called from irqs when function graph was used with a filter. Port the same fix to ARM. Acked-by: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: Colin Cross <ccross@android.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-31ARM: 7467/1: mutex: use generic xchg-based implementation for ARMv6+Will Deacon
The open-coded mutex implementation for ARMv6+ cores suffers from a severe lack of barriers, so in the uncontended case we don't actually protect any accesses performed during the critical section. Furthermore, the code is largely a duplication of the ARMv6+ atomic_dec code but optimised to remove a branch instruction, as the mutex fastpath was previously inlined. Now that this is executed out-of-line, we can reuse the atomic access code for the locking (in fact, we use the xchg code as this produces shorter critical sections). This patch uses the generic xchg based implementation for mutexes on ARMv6+, which introduces barriers to the lock/unlock operations and also has the benefit of removing a fair amount of inline assembly code. Cc: <stable@vger.kernel.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Nicolas Pitre <nico@linaro.org> Reported-by: Shan Kang <kangshan0910@gmail.com> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-31ARM: 7466/1: disable interrupt before spinning endlesslyShawn Guo
The CPU will endlessly spin at the end of machine_halt and machine_restart calls. However, this will lead to a soft lockup warning after about 20 seconds, if CONFIG_LOCKUP_DETECTOR is enabled, as system timer is still alive. Disable interrupt before going to spin endlessly, so that the lockup warning will never be seen. Cc: <stable@vger.kernel.org> Reported-by: Marek Vasut <marex@denx.de> Signed-off-by: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-31Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge Andrew's first set of patches: "Non-MM patches: - lots of misc bits - tree-wide have_clk() cleanups - quite a lot of printk tweaks. I draw your attention to "printk: convert the format for KERN_<LEVEL> to a 2 byte pattern" which looks a bit scary. But afaict it's solid. - backlight updates - lib/ feature work (notably the addition and use of memweight()) - checkpatch updates - rtc updates - nilfs updates - fatfs updates (partial, still waiting for acks) - kdump, proc, fork, IPC, sysctl, taskstats, pps, etc - new fault-injection feature work" * Merge emailed patches from Andrew Morton <akpm@linux-foundation.org>: (128 commits) drivers/misc/lkdtm.c: fix missing allocation failure check lib/scatterlist: do not re-write gfp_flags in __sg_alloc_table() fault-injection: add tool to run command with failslab or fail_page_alloc fault-injection: add selftests for cpu and memory hotplug powerpc: pSeries reconfig notifier error injection module memory: memory notifier error injection module PM: PM notifier error injection module cpu: rewrite cpu-notifier-error-inject module fault-injection: notifier error injection c/r: fcntl: add F_GETOWNER_UIDS option resource: make sure requested range is included in the root range include/linux/aio.h: cpp->C conversions fs: cachefiles: add support for large files in filesystem caching pps: return PTR_ERR on error in device_create taskstats: check nla_reserve() return sysctl: suppress kmemleak messages ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSION ipc: compat: use signed size_t types for msgsnd and msgrcv ipc: allow compat IPC version field parsing if !ARCH_WANT_OLD_COMPAT_IPC ipc: add COMPAT_SHMLBA support ...
2012-07-31ipc: use Kconfig options for __ARCH_WANT_[COMPAT_]IPC_PARSE_VERSIONWill Deacon
Rather than #define the options manually in the architecture code, add Kconfig options for them and select them there instead. This also allows us to select the compat IPC version parsing automatically for platforms using the old compat IPC interface. Reported-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Will Deacon <will.deacon@arm.com> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Chris Metcalf <cmetcalf@tilera.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31atomic64_test: simplify the #ifdef for atomic64_dec_if_positive() testCatalin Marinas
Introduce CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE and use this instead of the multitude of #if defined() checks in atomic64_test.c Signed-off-by: Catalin Marinas <catalin.marinas@arm.com> Cc: Russell King <linux@arm.linux.org.uk> Cc: Ralf Baechle <ralf@linux-mips.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31arch: remove direct definitions of KERN_<LEVEL> usesJoe Perches
Add #include <linux/kern_levels.h> so that the #define KERN_<LEVEL> macros don't have to be duplicated. Signed-off-by: Joe Perches <joe@perches.com> Cc: Kay Sievers <kay.sievers@vrfy.org> Cc: Russell King <linux@arm.linux.org.uk> Cc: Kay Sievers <kay@vrfy.org> Acked-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-31arch/arm/mach-netx/fb.c: reuse dummy clk routines for CONFIG_HAVE_CLK=nViresh Kumar
mach-netx had its own implementation of clk routines like, clk_get{put}, clk_enable{disable}, etc. And with introduction of following patchset: https://lkml.org/lkml/2012/4/24/154 we get compilation error for multiple definition of these routines. Sascha had following suggestion to deal with it: http://www.spinics.net/lists/arm-kernel/msg179369.html So, remove this code completely. Signed-off-by: Viresh Kumar <viresh.kumar2@arm.com> Reported-by: Paul Gortmaker <paul.gortmaker@gmail.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-07-30Merge tag 'mfd-3.6-1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 Pull MFD bits from Samuel Ortiz: "We have support for a few new drivers: - Samsung s2mps11 - Wolfson Microelectronics wm5102 and wm5110 - Marvell 88PM800 and 88PM805 - TI twl6041 We also have our regular driver improvements: - Device tree and IRQ domain support for STE AB8500 - Regmap and devm_* API conversion for TI tps6586x - Device tree support for Samsung max77686 - devm_* API conversion for STE AB3100 Besides that, quite a lot of fixing and cleanup for mc13xxx, tps65910, tps65090, da9052 and twl-core." Fix up mostly trivial conflicts, with the exception of drivers/usb/host/ehci-omap.c in particular, which had some re-organization of the reset sequence (commit 1a49e2ac9651: "EHCI: centralize controller initialization") that clashed with commit 2761a6394516 ("mfd: USB: Fix the omap-usb EHCI ULPI PHY reset fix issues"). In particular, commit 2761a6394516 moved the usb_add_hcd() to the *middle* of the reset sequence, which clashes fairly badly with the reset sequence re-organization (although it could have been done inside the new omap_ehci_init() function). I left that part of commit 2761a6394516 just undone. * tag 'mfd-3.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (110 commits) mfd: Ensure AB8500 platform data is passed through db8500-prcmu to MFD Core mfd: Arizone core should select MFD_CORE mfd: Fix arizona-irq.c build by selecting REGMAP_IRQ mfd: Add debug trace on entering and leaving arizone runtime suspend mfd: Correct tps65090 cell names mfd: Remove gpio support from tps6586x core driver ARM: tegra: defconfig: Enable tps6586x gpio gpio: tps6586x: Add gpio support through platform driver mfd: Cache tps6586x register through regmap mfd: Use regmap for tps6586x register access. mfd: Use devm managed resources for tps6586x input: Add onkey support for 88PM80X PMIC mfd: Add support for twl6041 mfd: Fix twl6040 revision information mfd: Matches should be NULL when populate anatop child devices input: ab8500-ponkey: Create AB8500 domain IRQ mapping mfd: Add missing out of memory check for pcf50633 Documentation: Describe the AB8500 Device Tree bindings mfd: Add tps65910 32-kHz-crystal-input init mfd: Drop modifying mc13xxx driver's id_table in probe ...
2012-07-30Merge branch 'for-linus-for-3.6-rc1' of ↵Linus Torvalds
git://git.linaro.org/people/mszyprowski/linux-dma-mapping Pull DMA-mapping updates from Marek Szyprowski: "Those patches are continuation of my earlier work. They contains extensions to DMA-mapping framework to remove limitation of the current ARM implementation (like limited total size of DMA coherent/write combine buffers), improve performance of buffer sharing between devices (attributes to skip cpu cache operations or creation of additional kernel mapping for some specific use cases) as well as some unification of the common code for dma_mmap_attrs() and dma_mmap_coherent() functions. All extensions have been implemented and tested for ARM architecture." * 'for-linus-for-3.6-rc1' of git://git.linaro.org/people/mszyprowski/linux-dma-mapping: ARM: dma-mapping: add support for DMA_ATTR_SKIP_CPU_SYNC attribute common: DMA-mapping: add DMA_ATTR_SKIP_CPU_SYNC attribute ARM: dma-mapping: add support for dma_get_sgtable() common: dma-mapping: introduce dma_get_sgtable() function ARM: dma-mapping: add support for DMA_ATTR_NO_KERNEL_MAPPING attribute common: DMA-mapping: add DMA_ATTR_NO_KERNEL_MAPPING attribute common: dma-mapping: add support for generic dma_mmap_* calls ARM: dma-mapping: fix error path for memory allocation failure ARM: dma-mapping: add more sanity checks in arm_dma_mmap() ARM: dma-mapping: remove custom consistent dma region mm: vmalloc: use const void * for caller argument scatterlist: add sg_alloc_table_from_pages function
2012-07-30Merge git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edacLinus Torvalds
Pull EDAC patches from Mauro Carvalho Chehab: - the second part of the EDAC rework: - Add the sysfs nodes that exports the real memory layout, instead of the fake one (needed to properly represent Intel memory controllers since 2002) - convert EDAC MC to use "struct device" instead of creating the sysfs nodes via the kobj API - adds a tracepoint to represent memory errors - some cleanup patches - some fixes at i5000, i5400 and EDAC core - a new EDAC driver for Caldera. * git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-edac: (33 commits) edac i5000, i5400: fix pointer math in i5000_get_mc_regs() edac: allow specifying the error count with fake_inject edac: add support for Calxeda highbank L2 cache ecc edac: add support for Calxeda highbank memory controller edac: create top-level debugfs directory sb_edac: properly handle error count i7core_edac: properly handle error count edac: edac_mc_handle_error(): add an error_count parameter edac: remove arch-specific parameter for the error handler amd64_edac: Don't pass driver name as an error parameter edac_mc: check for allocation failure in edac_mc_alloc() edac: Increase version to 3.0.0 edac_mc: Cleanup per-dimm_info debug messages edac: Convert debugfX to edac_dbg(X, edac: Use more normal debugging macro style edac: Don't add __func__ or __FILE__ for debugf[0-9] msgs Edac: Add ABI Documentation for the new device nodes edac: move documentation ABI to ABI/testing/sysfs-devices-edac i7core_edac: change the mem allocation scheme to make Documentation/kobject.txt happy edac: change the mem allocation scheme to make Documentation/kobject.txt happy ...
2012-07-30Merge tag 'boards2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc board updates from Olof Johansson: "This branch contains board updates, mostly for shmobile, but also a couple for PXA. The shmobile platforms are still in the early stages of DT enablement, so there's a bit more updates here than we'd ideally want to see: - regulator updates to provide some fixed regulators on several boards - gpio support updates for multiple boards - misc updates for recently-introduced boards armadillo800eva and kzm9g - defconfig updates" * tag 'boards2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (37 commits) ARM: shmobile: kzm9g: defconfig enable INOTIFY_USER ARM: mach-shmobile: armadillo800eva: defconfig Allow use of armhf userspace ARM: shmobile: armadillo800eva: A3SP domain includes USB ARM: shmobile: armadillo800eva: A4LC domain includes LCDC ARM: shmobile: armadillo800eva: USB Func enables external IRQ mode ARM: mach-shmobile: kzm9d: Add defconfig ARM: mach-shmobile: select the fixed regulator driver on several boards ARM: mach-shmobile: add SDHI2 to the 2.8V fixed regulator consumers on kzm9g ARM: pxa: hx4700: Use DEFINE_RES_* macros consistently ARM: pxa: remove eseries.h ARM: mach-shmobile: add fixed voltage regulators to marzen ARM: mach-shmobile: add fixed voltage regulators to kzm9g ARM: mach-shmobile: add fixed voltage regulators to kzm9d ARM: mach-shmobile: add fixed voltage regulators to kota2 ARM: mach-shmobile: add fixed voltage regulators to g4evm ARM: mach-shmobile: add fixed voltage regulators to bonito ARM: mach-shmobile: add fixed voltage regulators to armadillo800eva ARM: mach-shmobile: add fixed voltage regulators to ap4evb ARM: mach-shmobile: add fixed voltage regulators to ag5evm ARM: mach-shmobile: add 3.3V and 1.8V fixed regulators to mackerel ...
2012-07-30Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-socLinus Torvalds
Pull arm-soc soc updates from Olof Johansson: "This is the second batch of SoC updates for the 3.6 merge window, containing parts that arrived close to the merge window opening and thus needed to sit in linux-next for a while. Most contents is updates of Renesas shmobile, with a couple of Samsung Exynos patches in the mix." * tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (39 commits) ARM: S3C64XX: Add header file protection macros in pm-core.h [CPUFREQ] EXYNOS5250: Add support max 1.7GHz for EXYNOS5250 ARM: EXYNOS: Add G2D related clock entries for SMDK4X12 ARM: EXYNOS: Move G2D clock entries to clock-exynos4210.c file ARM: shmobile: Fix build problem in pm-sh7372.c for unusual .config ARM: shmobile: Take cpuidle dependencies into account correctly ARM: mach-shmobile: sh7377 generic board support via DT ARM: mach-shmobile: r8a7740 generic board support via DT ARM: shmobile: sh7372: completely switch over to using pm-rmobile API ARM: shmobile: ap4evb: switch to using pm-rmobile API ARM: shmobile: mackerel: switch to using pm-rmobile API ARM: shmobile: sh7372: add pm-rmobile domain support ARM: shmobile: r8a7740: add A4LC pm domain support ARM: shmobile: r8a7740: add A3SP pm domain support ARM: shmobile: r8a7740: add A4S pm domain support ARM: shmobile: r8a7740: fixup: MSEL1CR 7bit control ARM: shmobile: soc-core: add R-mobile PM domain common APIs ARM: shmobile: sh7372 A3SM CPUIdle support ARM: shmobile: Use INTCA with sh7372 A3SM power domain ARM: mach-shmobile: Convert sh_clk_mstp32_register to sh_clk_mstp_register ...
2012-07-30Merge branch 'for-3.6' of git://gitorious.org/linux-pwm/linux-pwmLinus Torvalds
Pull PWM subsystem from Thierry Reding: "The new PWM subsystem aims at collecting all implementations of the legacy PWM API and to eventually replace it completely. The subsystem has been in development for over half a year now and many drivers have already been converted. It has been in linux-next for a couple of weeks and there have been no major issues so I think it is ready for inclusion in your tree." Arnd Bergmann <arnd@arndb.de>: "Very much Ack on the new subsystem. It uses the interface declarations as the previously separate pwm drivers, so nothing changes for now in the drivers using it, although it enables us to change those more easily in the future if we want to. This work is also one of the missing pieces that are required to eventually build ARM kernels for multiple platforms, which is currently prohibited (amongs other things) by the fact that you cannot have more than one driver exporting the pwm functions." Tested-and-acked-by: Alexandre Courbot <acourbot@nvidia.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Philip, Avinash <avinashphilip@ti.com> # TI's AM33xx platforms Acked-By: Alexandre Pereira da Silva <aletes.xgr@gmail.com> # LPC32XX Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Sachin Kamat <sachin.kamat@linaro.org> Fix up trivial conflicts with other cleanups and DT updates. * 'for-3.6' of git://gitorious.org/linux-pwm/linux-pwm: (36 commits) pwm: pwm-tiehrpwm: PWM driver support for EHRPWM pwm: pwm-tiecap: PWM driver support for ECAP APWM pwm: fix used-uninitialized warning in pwm_get() pwm: add lpc32xx PWM support pwm_backlight: pass correct brightness to callback pwm: Use pr_* functions in pwm-samsung.c file pwm: Convert pwm-samsung to use devm_* APIs pwm: Convert pwm-tegra to use devm_clk_get() pwm: pwm-mxs: Return proper error if pwmchip_remove() fails pwm: pwm-bfin: Return proper error if pwmchip_remove() fails pwm: pxa: Propagate pwmchip_remove() error pwm: Convert pwm-pxa to use devm_* APIs pwm: Convert pwm-vt8500 to use devm_* APIs pwm: Convert pwm-imx to use devm_* APIs pwm: Conflict with legacy PWM API pwm: pwm-mxs: add pinctrl support pwm: pwm-mxs: use devm_* managed functions pwm: pwm-mxs: use global reset function stmp_reset_block pwm: pwm-mxs: encode soc name in compatible string pwm: Take over maintainership of the PWM subsystem ...
2012-07-30ARM: dma-mapping: add support for DMA_ATTR_SKIP_CPU_SYNC attributeMarek Szyprowski
This patch adds support for DMA_ATTR_SKIP_CPU_SYNC attribute for dma_(un)map_(single,page,sg) functions family. It lets dma mapping clients to create a mapping for the buffer for the given device without performing a CPU cache synchronization. CPU cache synchronization can be skipped for the buffers which it is known that they are already in 'device' domain (CPU caches have been already synchronized or there are only coherent mappings for the buffer). For advanced users only, please use it with care. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-30ARM: dma-mapping: add support for dma_get_sgtable()Marek Szyprowski
This patch adds support for dma_get_sgtable() function which is required to let drivers to share the buffers allocated by DMA-mapping subsystem. Generic implementation based on virt_to_page() is not suitable for ARM dma-mapping subsystem. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-30ARM: dma-mapping: add support for DMA_ATTR_NO_KERNEL_MAPPING attributeMarek Szyprowski
This patch adds support for DMA_ATTR_NO_KERNEL_MAPPING attribute for IOMMU allocations, what let drivers to save precious kernel virtual address space for large buffers that are intended to be accessed only from userspace. This patch is heavily based on initial work kindly provided by Abhinav Kochhar <abhinav.k@samsung.com>. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-30common: dma-mapping: add support for generic dma_mmap_* callsMarek Szyprowski
Commit 9adc5374 ('common: dma-mapping: introduce mmap method') added a generic method for implementing mmap user call to dma_map_ops structure. This patch converts ARM and PowerPC architectures (the only providers of dma_mmap_coherent/dma_mmap_writecombine calls) to use this generic dma_map_ops based call and adds a generic cross architecture definition for dma_mmap_attrs, dma_mmap_coherent, dma_mmap_writecombine functions. The generic mmap virt_to_page-based fallback implementation is provided for architectures which don't provide their own implementation for mmap method. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-07-30ARM: dma-mapping: fix error path for memory allocation failureMarek Szyprowski
This patch fixes incorrect check in error path. When the allocation of first page fails, the kernel ops appears due to accessing -1 element of the pages array. Reported-by: Sylwester Nawrocki <s.nawrocki@samsung.com> Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-07-30ARM: dma-mapping: add more sanity checks in arm_dma_mmap()Marek Szyprowski
Add some sanity checks and forbid mmaping of buffers into vma areas larger than allocated dma buffer. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
2012-07-30ARM: dma-mapping: remove custom consistent dma regionMarek Szyprowski
This patch changes dma-mapping subsystem to use generic vmalloc areas for all consistent dma allocations. This increases the total size limit of the consistent allocations and removes platform hacks and a lot of duplicated code. Atomic allocations are served from special pool preallocated on boot, because vmalloc areas cannot be reliably created in atomic context. Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com> Reviewed-by: Kyungmin Park <kyungmin.park@samsung.com> Reviewed-by: Minchan Kim <minchan@kernel.org>
2012-07-30Merge branch 'devel'Mauro Carvalho Chehab
* devel: (33 commits) edac i5000, i5400: fix pointer math in i5000_get_mc_regs() edac: allow specifying the error count with fake_inject edac: add support for Calxeda highbank L2 cache ecc edac: add support for Calxeda highbank memory controller edac: create top-level debugfs directory sb_edac: properly handle error count i7core_edac: properly handle error count edac: edac_mc_handle_error(): add an error_count parameter edac: remove arch-specific parameter for the error handler amd64_edac: Don't pass driver name as an error parameter edac_mc: check for allocation failure in edac_mc_alloc() edac: Increase version to 3.0.0 edac_mc: Cleanup per-dimm_info debug messages edac: Convert debugfX to edac_dbg(X, edac: Use more normal debugging macro style edac: Don't add __func__ or __FILE__ for debugf[0-9] msgs Edac: Add ABI Documentation for the new device nodes edac: move documentation ABI to ABI/testing/sysfs-devices-edac i7core_edac: change the mem allocation scheme to make Documentation/kobject.txt happy edac: change the mem allocation scheme to make Documentation/kobject.txt happy ...
2012-07-29ARM: 7465/1: Handle >4GB memory sizes in device tree and mem=size@start optionPeter Maydell
The memory regions which are passed to arm_add_memory() from device tree blobs via early_init_dt_add_memory_arch() can have sizes which are larger than will fit in a 32 bit integer, so switch to using a phys_addr_t to hold them, to avoid silently dropping the top 32 bits of the size. Similarly, use phys_addr_t in early_mem() so that mem=size@start command line options specifying more than 4GB behave sensibly. Acked-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-29Merge branch 'marvell/dt' into late2/dtOlof Johansson
* marvell/dt: (41 commits) ARM: Kirkwood: Replace mrvl with marvell ARM: Kirkwood: Describe GoFlex Net LEDs and SATA in DT. ARM: Kirkwood: Describe Dreamplug LEDs in DT. ARM: Kirkwood: Describe iConnects LEDs in DT. ARM: Kirkwood: Describe iConnects temperature sensor in DT. ARM: Kirkwood: Describe IB62x0 LEDs in DT. ARM: Kirkwood: Describe IB62x0 gpio-keys in DT. ARM: Kirkwood: Describe DNS32? gpio-keys in DT. ARM: Kirkwood: Move common portions into a kirkwood-dnskw.dtsi ARM: Kirkwood: Replace DNS-320/DNS-325 leds with dt bindings ARM: Kirkwood: Describe DNS325 temperature sensor in DT. ARM: Kirkwood: Use DT to configure SATA device. ARM: kirkwood: use devicetree for SPI on dreamplug ARM: kirkwood: Add LS-XHL and LS-CHLv2 support ARM: Kirkwood: Initial DTS support for Kirkwood GoFlex Net ARM: Kirkwood: Add basic device tree support for QNAP TS219. ATA: sata_mv: Add device tree support ARM: Orion: DTify the watchdog timer. ARM: Orion: Add arch support needed for I2C via DT. ARM: kirkwood: use devicetree for orion-spi ...
2012-07-29arm: da850: configure LCDC fifo thresholdManjunathappa, Prakash
Configure fifo threshold in raster dma_control register to 512 bytes. This reduces LCDC underflow errors. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2012-07-28ARM: mxc: Include missing irqs.h headerFabio Estevam
Include irqs.h in order to fix the following build error: arch/arm/plat-mxc/tzic.c:195:11: error: 'FIQ_START' undeclared (first use in this function) Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Dirk Behme <dirk.behme@de.bosch.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2012-07-28Merge branch 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linuxLinus Torvalds
Pull embedded i2c changes from Wolfram Sang: "Changes for the "embedded" part of the I2C subsystem: - lots of devicetree conversions of drivers (and preparations for that) - big cleanups for drivers for OMAP, Tegra, Nomadik, Blackfin - Rafael's struct dev_pm_ops conversion patches for I2C - usual driver cleanups and fixes All patches have been in linux-next for an apropriate time and all patches touching files outside of i2c-folders should have proper acks from the maintainers." * 'i2c-embedded/for-next' of git://git.pengutronix.de/git/wsa/linux: (60 commits) Revert "i2c: tegra: convert normal suspend/resume to *_noirq" I2C: MV64XYZ: Add Device Tree support i2c: stu300: use devm managed resources i2c: i2c-ocores: support for 16bit and 32bit IO V4L/DVB: mfd: use reg_shift instead of regstep i2c: i2c-ocores: Use reg-shift property i2c: i2c-ocores: DT bindings and minor fixes. i2c: mv64xxxx: remove EXPERIMENTAL tag i2c-s3c2410: Use plain pm_runtime_put() i2c: s3c2410: Fix pointer type passed to of_match_node() i2c: mxs: Set I2C timing registers for mxs-i2c i2c: i2c-bfin-twi: Move blackfin TWI register access Macro to head file. i2c: i2c-bfin-twi: Move TWI peripheral pin request array to platform data. i2c:i2c-bfin-twi: include twi head file i2c:i2c-bfin-twi: TWI fails to restart next transfer in high system load. i2c: i2c-bfin-twi: Tighten condition when failing I2C transfer if MEN bit is reset unexpectedly. i2c: i2c-bfin-twi: Break dead waiting loop if i2c device misbehaves. i2c: i2c-bfin-twi: Improve the patch for bug "Illegal i2c bus lock upon certain transfer scenarios". i2c: i2c-bfin-twi: Illegal i2c bus lock upon certain transfer scenarios. i2c-mv64xxxx: allow more than one driver instance ... Conflicts: drivers/i2c/busses/i2c-nomadik.c
2012-07-28ARM: 7475/1: sys_trace: allow all syscall arguments to be updated via ptraceWill Deacon
Prior to syscall invocation, __sys_trace only reloads r0-r3 from the kernel stack, preventing the debugger from updating arguments 5-7 when signalled via ptrace. This patch updates the code to reload r0-r6, updating arguments 5 and 6 on the stack (argument 7 is only used by OABI indirect syscalls and can remain in a register). Reported-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-28ARM: 7474/1: get rid of TIF_SYSCALL_RESTARTSYSAl Viro
just let do_work_pending() return 1 on normal local restarts and -1 on those that had been caused by ERESTART_RESTARTBLOCK (and 0 is still "all done, sod off to userland now"). And let the asm glue flip scno to restart_syscall(2) one if it got negative from us... [will: resolved conflicts with audit fixes] Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2012-07-28ARM: 7473/1: deal with handlerless restarts without leaving the kernelAl Viro
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>