summaryrefslogtreecommitdiff
path: root/arch/arm
AgeCommit message (Collapse)Author
2009-12-06ARM: 5823/1: SA1100: h3100/h3600: add support for gpio-keysDmitry Artamonow
Add support for "Power" and "Action" (joystick center) buttons - the only buttons on iPaq h3100/h3600 connected to GPIOs (other buttons are controlled by microcontroller) Also remove setting PWER for wakeup on Power button press - gpio-keys driver will handle it. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5822/1: SA1100: h3100/h3600: clean up #includesDmitry Artamonow
After a code reorganization and following split, there's some #includes now unused. Clean them up and sort remaining alphabetticaly where possible. Compile tested. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5821/1: SA1100: h3100/h3600: revise copyright boilerplatesDmitry Artamonow
Correct boilerplates after files split. Also shorten them a bit - use standart GPL wording (as per http://lkml.org/lkml/2007/5/1/220) and drop changelog, which only entry about h3800 support and abstracted EGPIOs is just confusing now, as both of these features are gone. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5820/1: SA1100: h3100/h3600: split h3600.cDmitry Artamonow
Split common h3600.c into three separate files: h3100.c, h3600.c and h3xxx.c (the latter contains common code for h3100/h3600) Copyright boilerplates and #includes are copied intact and will be cleaned up later. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5819/1: SA1100: h3100/h3600: merge h3600.h and h3600_gpio.h into h3xxx.hDmitry Artamonow
Combine both headers into one, rename to h3xxx.h and change all users accordingly. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5818/1: SA1100: h3100/h3600: drop old GPIO definitionsDmitry Artamonow
As all existing code was converted to gpiolib, drop no more used pre-gpiolib (bit-shifted) GPIO definintions. Supply new gpiolib-friendly definitions for GPIOs which don't have them yet. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5817/1: SA1100: h3100/h3600: configure all unused gpios as inputsDmitry Artamonow
After conversion to gpiolib there's still some GPIOs left, that get configured in *_mach_init() as outputs (using direct operations on GPCR/GPDR registers), but otherwise unused. These GPIOs are mainly sound related and should be configured by corresponding driver once it is written. Drop this initialisation and configure all GPIOs as input. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5816/1: SA1100: h3600: remove IRQ_GPIO_* definitionsDmitry Artamonow
As all the remaining users of these definitions (in pcmcia/sa1100_h3600 driver) were converted to gpio_to_irq(), they can be safely removed. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5815/1: SA1100: h3100/h3600: remove now unused assign_h3600_egpio handlersDmitry Artamonow
As all users of assign_h3600_egpio now converted to gpiolib, we can safely remove all assign_h3600_egpio handling code and definitions. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5814/1: SA1100: h3100/h3600: convert all users of assign_h3600_egpio to ↵Dmitry Artamonow
gpiolib Use of gpio_request/gpio_free in some callbacks may look ugly, but corresponding drivers (sa1100_serial and sa1100_fb) don't provide (yet) init/exit hooks and registering these gpios in *_mach_init is also not possible, because htc-gpio driver starts a bit later... Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5813/1: SA1100: h3100/h3600: add htc-egpio driverDmitry Artamonow
It will be used for future conversion of assign_h3600_egpio calls to gpiolib. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5812/1: SA1100: h3100/h3600: separate machine-specific LCD helpersDmitry Artamonow
h3100 and h3600 have different sets of LCD-controlling gpios, which mapped to the same "abstracted" EGPIO. As we plan to get rid of those abstracted egpios completely, we need to separate these helper functions. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5799/1: SA1100: h3600: stop setting direction for LCD pinsDmitry Artamonow
sa1100_fb driver handles this Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5798/1: SA1100: h3600: remove unused cruft from h3600.hDmitry Artamonow
PM_SUSPEND, PM_RESUME and machine_is_h3xxx() are not used anywhere in kernel (checked with git grep), so it's safe to remove them. Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5796/1: SA1100: h3600: remove IRDA bits from serial PM callbackDmitry Artamonow
IRDA is handled by separate sa1100-ir driver and has nothing to do with sa1100_serial Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5797/1: SA1100: h3100/h3600: remove dead links from Kconfig help textDmitry Artamonow
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: 5795/1: SA1100: h3100/h3600: mark *_mach_init functions as __initDmitry Artamonow
Signed-off-by: Dmitry Artamonow <mad_soft@inbox.ru> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: iPAQ: no need to set PWER_RTCRussell King
The rtc-sa1100 driver takes care of this. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: iPAQ: move serial port support functionsRussell King
No point calling sa1100_register_uart_fns early - these aren't used until late in the boot sequence. Also convert to gpiolib support. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: iPAQ: convert H3100 IrDA to use generic gpio supportRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: iPAQ: provide a way to setup platform-controlled GPIOsRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: iPAQ: separate IrDA machine specificsRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: h3600: provide each iPAQ machine type with own init functionRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-12-06ARM: sa11x0: convert set_xxx_data() to register_xxx()Russell King
Only register devices if we have platform data for those which require platform data. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-25Merge branch 'mach-types'Russell King
2009-11-25[ARM] Update mach-typesRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-23ARM: 5793/1: ARM: Check put_user fail in do_signal when enable OABI_COMPATJean PIHET
Using OABI, the call to put_user in do_signal can fail causing the calling app to hang. The solution is to check if put_user fails and force the app to seg fault in that case. Tested with multiple sleeping apps/threads (using the nanosleep syscall) and suspend/resume. Signed-off-by: janboe <janboe.ye at gmail.com> Signed-off-by: Jean Pihet <jpihet@mvista.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-22Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2009-11-22[ARM] pxa/spitz: fix compile regression on spitzPavel Machek
If CONFIG_AKITA is not set, spitz fails to compile. It worked ok in rc5. Fix is one more ifdef... Signed-off-by: Pavel Machek <pavel@ucw.cz> Acked-by: Stanislav Brabec <utx@penguin.cz> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-20[ARM] pxa/cpufreq: fix index assignments for end markerDaniel Mack
I stumbled over two small things regarding the .index field assignment in the dynamically created cpu frequency tables for pxa2xx and pxa3xx. Even though that doesn't currently cause any problem, it should still be fixed in case the logic in the CPUFREQ core changes. Signed-off-by: Daniel Mack <daniel@caiaq.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-20[ARM] kmap: fix build errors with DEBUG_HIGHMEM enabledRussell King
d451564 broke ARM by requiring KM_IRQ_PTE, KM_NMI and KM_NMI_PTE to always be defined. Solve this by providing invalid definitions for these constants, but only if CONFIG_DEBUG_HIGHMEM is enabled. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-18Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: OMAP: cs should be positive in gpmc_cs_free() omap: fix unlikely(x) < y omap3: clock: Fixed dpll3_m2x2 rate calculation omap3: clock: Fix the DPLL freqsel computations omap: Fix keymap for zoom2 according to matrix keypad framwork
2009-11-18OMAP: cs should be positive in gpmc_cs_free()Roel Kluin
The index `cs' is signed, test whether it is negative before we release gpmc_cs_mem[cs]. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-11-18omap: fix unlikely(x) < yRoel Kluin
The closing parenthesis was not in the right location. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-11-17omap3: clock: Fixed dpll3_m2x2 rate calculationTero Kristo
Current calculation does not take into account any changes to M2 divisor, and thus when we change VDD2 OPP, dpll3_m2x2 rate does not change. Fixed by re-routing dpll3_m2x2 parent to dpll3_m2. Signed-off-by: Tero Kristo <tero.kristo@nokia.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-17omap3: clock: Fix the DPLL freqsel computationsRajendra Nayak
Fix the freqsel value computation. Use n instead of (n+1) The formula in the TRM uses a zero-based N, hence the (n+1); however at this point in the clock34xx.c code, N is one-based. Hayati Bayrakdar <h-bayrakdar@ti.com> and Nishanth Menon <nm@ti.com> helped track down this bug. Signed-off-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Paul Walmsley <paul@pwsan.com> [paul@pwsan.com: modified commit message] Cc: Hayati Bayrakdar <h-bayrakdar@ti.com> Cc: Nishanth Menon <nm@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-17Merge master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] pxa: ensure mfp is in correct range in mfp_{read,write} [ARM] pxa/hx4700: fix hx4700 touchscreen pressure values ARM: 5787/1: U300 COH 901 331 fixes ARM: Fix warning in sa1100-flash.c [ARM] Kirkwood: disable propagation of mbus error to the CPU local bus [ARM] pxa: fix incorrect mfp_to_gpio() conversion [ARM] pxa/colibri: fix AC97 ifdefs and add missing include [ARM] pxa: fix missing underscores in mfp-pxa910.h [ARM] pxa: fix interrupts number calculation when CONFIG_PXA_HAVE_ISA_IRQS=y
2009-11-16omap: Fix keymap for zoom2 according to matrix keypad framworkVimal Singh
Interpretation of 'row' and 'col' got reversed in matrix keymap framework. Also last element '0', present in keymap array, is no more needed. Correcting zoom2 keyboard keymap accordingly. Signed-off-by: Vimal Singh <vimalsingh@ti.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-16Merge branch 'fix' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6
2009-11-16[ARM] pxa: ensure mfp is in correct range in mfp_{read,write}Roel Kluin
Ensure we do not read/write outside array boundaries with a negative index. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-16[ARM] pxa/hx4700: fix hx4700 touchscreen pressure valuesPaul Parsons
hx4700 touchscreen events were being dropped in ads7846_rx() because their pressure values consistently exceeded the platform maximum of 512; a sample of 256 pressure values were in the range 531 to 815. Doubling the platform maximum to 1024 allows hx4700 touchscreen events to pass the test. Signed-off-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-16Merge branch 'for-rmk' of git://git.marvell.com/orionRussell King
2009-11-16ARM: 5787/1: U300 COH 901 331 fixesLinus Walleij
This will fix some small issues with the COH 901 331 RTC driver: - Interrupt is disabled after alarm so that we don't fire multiple interrupts. - We return 0 from the coh901331_alarm_irq_enable() ridding a compile warning. - We alter the name in the U300 device registry to match that of the driver so they sucessfully resolve. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2009-11-16at91: at91sam9g20ek modify dual slot evaluation kitNicolas Ferre
at91sam9g20ek rev. C and onwards embed two SD/MMC slots. This patch modify the previous dual slot board definition to match the official rev. C board. It also allows the use of at91_mci SD/MMC driver in addition to the atmel-mci one. Some pins have been re-affected from leds or Ethernet phy IRQ to the SD/MMC slot A. This lead to a modification of those definitions. Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za>
2009-11-13[ARM] Kirkwood: disable propagation of mbus error to the CPU local busLennert Buytenhek
Disable propagation of mbus errors to the CPU local bus, as this causes mbus errors (which can occur for example for PCI aborts) to throw CPU aborts, which we're not set up to deal with. Reported-by: Dieter Kiermaier <dk-arm-linux@gmx.de> Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: Nicolas Pitre <nico@marvell.com>
2009-11-13[ARM] pxa: fix incorrect mfp_to_gpio() conversionEric Miao
Since MFP_PIN_GPIO* now includes 128-255, mfp_to_gpio() is no longer valid for those additional pins, fix it. Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-13[ARM] pxa/colibri: fix AC97 ifdefs and add missing includeMarek Vasut
The AC97 part wasn't initialized on Colibri/PXA320 because the macros were wrong. Also, the code didn't compile because of a header file not being included. Signed-off-by: Marek Vasut <marek.vasut@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-13[ARM] pxa: fix missing underscores in mfp-pxa910.hRoel Kluin
Underscores were missing. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-13[ARM] pxa: fix interrupts number calculation when CONFIG_PXA_HAVE_ISA_IRQS=yMarc Zyngier
Commit d2c37068429b29d6549cf3486fc84b836689e122 ([ARM] pxa: initialize default interrupt priority and use ICHP for IRQ handling) broke ISA interrupt support on pxa27x/3xx. In such a case, PXA_IRQ(0) != 0, and the IRQ number computed from ICHP must be offset by PXA_IRQ(0). Tested on an Arcom Zeus (pxa270), with both CONFIG_PXA_HAVE_ISA_IRQS enabled and disabled. Signed-off-by: Marc Zyngier <maz@misterjones.org> Tested-by: Haojian Zhuang <haojian.zhuang@marvell.com> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2009-11-12Merge branch 'omap-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: omap3: Decrease cpufreq transition latency omap3: update Pandora defconfig omap3: 3430sdp: Enable Linux Regulator framework omap3: beagle: Fix USB host port power control omap3: pandora: Fix keypad keymap omap1: Amstrad Delta defconfig fixes omap: Fix omapfb/lcdc on OMAP1510 broken when PM set omap: Use resource_size omap: Fix race condition in omap dma driver
generated by cgit v0.10.2 at 2024-11-05 19:17:56 (GMT)