| Age | Commit message (Collapse) | Author |
|---|
|
PCL10 is a cluster low power state in which cluster clock is gated off.
For e6500-based platform, cluster will enter PCL10 state automatically
when all cores of this cluster are offline.
Signed-off-by: Hongtao Jia <hongtao.jia@freescale.com>
Signed-off-by: Zhang Zhuoyu <Zhuoyu.Zhang@freescale.com>
Change-Id: Ibac7138ff685bbaeaed139629e9f2833e3148379
Reviewed-on: http://git.am.freescale.net:8181/22315
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Yang Li <LeoLi@freescale.com>
|
|
This patch add the DIU platform support for T1042RDB board.
The hdmi port is verified on the board.
Signed-off-by: Jason Jin <Jason.Jin@freescale.com>
Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
Change-Id: I9642fe4112ecc33d89007d80347b40c3d42cc122
Reviewed-on: http://git.am.freescale.net:8181/11535
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Jose Rivera <German.Rivera@freescale.com>
|
|
This reverts v3.13-rc3+ (78fd82238d0e5716) to v3.12, except for
commits which I noticed which appear relevant to the SDK.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Conflicts:
arch/powerpc/include/asm/kvm_host.h
arch/powerpc/kvm/book3s_hv_rmhandlers.S
arch/powerpc/kvm/book3s_interrupts.S
arch/powerpc/kvm/e500.c
arch/powerpc/kvm/e500mc.c
arch/powerpc/sysdev/fsl_soc.h
drivers/Kconfig
drivers/cpufreq/ppc-corenet-cpufreq.c
drivers/dma/fsldma.c
drivers/dma/s3c24xx-dma.c
drivers/misc/Makefile
drivers/mmc/host/sdhci-of-esdhc.c
drivers/mtd/devices/m25p80.c
drivers/net/ethernet/freescale/gianfar.h
drivers/platform/Kconfig
drivers/platform/Makefile
drivers/spi/spi-fsl-espi.c
include/crypto/algapi.h
include/linux/netdev_features.h
include/linux/skbuff.h
include/net/ip.h
net/core/ethtool.c
|
|
|
|
T104x has deep sleep feature, which can switch off most parts of
the SoC when it is in deep sleep mode. This way, it becomes more
energy-efficient.
The DDR controller will also be powered off in deep sleep. Therefore,
the last stage (the latter part of fsl_dp_enter_low) will run without DDR
access. This piece of code and related TLBs are prefetched in advance.
Due to the different initialization code between 32-bit and 64-bit, they
have seperate resume entry and precedure.
The feature supports 32-bit and 64-bit kernel mode.
Change-Id: I9b9b9188fdc67167030658b6cc1d0a1cbe7e2180
Signed-off-by: Wang Dongsheng <dongsheng.wang@freescale.com>
Signed-off-by: Chenhui Zhao <chenhui.zhao@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/10709
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Yang Li <LeoLi@freescale.com>
Reviewed-by: Jose Rivera <German.Rivera@freescale.com>
|
|
Conflicts:
Documentation/hwmon/ina2xx
arch/powerpc/Kconfig
arch/powerpc/boot/dts/b4860emu.dts
arch/powerpc/boot/dts/b4qds.dtsi
arch/powerpc/boot/dts/fsl/b4si-post.dtsi
arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi
arch/powerpc/boot/dts/p1023rdb.dts
arch/powerpc/boot/dts/t4240emu.dts
arch/powerpc/boot/dts/t4240qds.dts
arch/powerpc/configs/85xx/p1023_defconfig
arch/powerpc/configs/corenet32_smp_defconfig
arch/powerpc/configs/corenet64_smp_defconfig
arch/powerpc/configs/mpc85xx_smp_defconfig
arch/powerpc/include/asm/cputable.h
arch/powerpc/include/asm/device.h
arch/powerpc/include/asm/epapr_hcalls.h
arch/powerpc/include/asm/kvm_host.h
arch/powerpc/include/asm/mpic.h
arch/powerpc/include/asm/pci.h
arch/powerpc/include/asm/ppc-opcode.h
arch/powerpc/include/asm/ppc_asm.h
arch/powerpc/include/asm/reg_booke.h
arch/powerpc/kernel/epapr_paravirt.c
arch/powerpc/kernel/process.c
arch/powerpc/kernel/prom.c
arch/powerpc/kernel/setup-common.c
arch/powerpc/kernel/setup_32.c
arch/powerpc/kernel/setup_64.c
arch/powerpc/kernel/smp.c
arch/powerpc/kernel/swsusp_asm64.S
arch/powerpc/kernel/swsusp_booke.S
arch/powerpc/kvm/book3s_pr.c
arch/powerpc/kvm/booke.c
arch/powerpc/kvm/booke.h
arch/powerpc/kvm/e500.c
arch/powerpc/kvm/e500.h
arch/powerpc/kvm/e500_emulate.c
arch/powerpc/kvm/e500mc.c
arch/powerpc/kvm/powerpc.c
arch/powerpc/perf/e6500-pmu.c
arch/powerpc/platforms/85xx/Kconfig
arch/powerpc/platforms/85xx/Makefile
arch/powerpc/platforms/85xx/b4_qds.c
arch/powerpc/platforms/85xx/c293pcie.c
arch/powerpc/platforms/85xx/corenet_ds.c
arch/powerpc/platforms/85xx/corenet_ds.h
arch/powerpc/platforms/85xx/p1023_rds.c
arch/powerpc/platforms/85xx/p2041_rdb.c
arch/powerpc/platforms/85xx/p3041_ds.c
arch/powerpc/platforms/85xx/p4080_ds.c
arch/powerpc/platforms/85xx/p5020_ds.c
arch/powerpc/platforms/85xx/p5040_ds.c
arch/powerpc/platforms/85xx/smp.c
arch/powerpc/platforms/85xx/t4240_qds.c
arch/powerpc/platforms/Kconfig
arch/powerpc/sysdev/Makefile
arch/powerpc/sysdev/fsl_mpic_timer_wakeup.c
arch/powerpc/sysdev/fsl_msi.c
arch/powerpc/sysdev/fsl_pci.c
arch/powerpc/sysdev/fsl_pci.h
arch/powerpc/sysdev/fsl_soc.h
arch/powerpc/sysdev/mpic.c
arch/powerpc/sysdev/mpic_timer.c
drivers/Kconfig
drivers/clk/Kconfig
drivers/clk/clk-ppc-corenet.c
drivers/cpufreq/Kconfig.powerpc
drivers/cpufreq/Makefile
drivers/cpufreq/ppc-corenet-cpufreq.c
drivers/crypto/caam/Kconfig
drivers/crypto/caam/Makefile
drivers/crypto/caam/ctrl.c
drivers/crypto/caam/desc_constr.h
drivers/crypto/caam/intern.h
drivers/crypto/caam/jr.c
drivers/crypto/caam/regs.h
drivers/dma/fsldma.c
drivers/hwmon/ina2xx.c
drivers/iommu/Kconfig
drivers/iommu/fsl_pamu.c
drivers/iommu/fsl_pamu.h
drivers/iommu/fsl_pamu_domain.c
drivers/iommu/fsl_pamu_domain.h
drivers/misc/Makefile
drivers/mmc/card/block.c
drivers/mmc/core/core.c
drivers/mmc/host/sdhci-esdhc.h
drivers/mmc/host/sdhci-pltfm.c
drivers/mtd/nand/fsl_ifc_nand.c
drivers/net/ethernet/freescale/gianfar.c
drivers/net/ethernet/freescale/gianfar.h
drivers/net/ethernet/freescale/gianfar_ethtool.c
drivers/net/phy/at803x.c
drivers/net/phy/phy_device.c
drivers/net/phy/vitesse.c
drivers/pci/msi.c
drivers/staging/Kconfig
drivers/staging/Makefile
drivers/uio/Kconfig
drivers/uio/Makefile
drivers/uio/uio.c
drivers/usb/host/ehci-fsl.c
drivers/vfio/Kconfig
drivers/vfio/Makefile
include/crypto/algapi.h
include/linux/iommu.h
include/linux/mmc/sdhci.h
include/linux/msi.h
include/linux/netdev_features.h
include/linux/phy.h
include/linux/skbuff.h
include/net/ip.h
include/uapi/linux/vfio.h
net/core/ethtool.c
net/ipv4/route.c
net/ipv6/route.c
|
|
Several functions are only ever referenced locally, so make them static.
Of those functions, many of them are protected by an #if. However, the
code which can compile fine in either case.
Now that (1) the unneeded code is marked 'static' and (2) the code is
only used under a C 'if (IS_ENABLED(CONFIG_FB_FSL_DIU))', the compiler
can automatically remove the unneeded code, and we don't need the #if or
the empty stub functions.
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
|
|
Add APIs for setting wakeup source and lossless Ethernet in low power modes.
These APIs can be used by wake-on-packet feature.
Change-Id: I1803dcd4571af1eac49b43d99c578e7f99e2c278
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jin Qing <b24347@freescale.com>
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
Reviewed-on: http://git.am.freescale.net:8181/1202
Reviewed-by: Wood Scott-B07421 <scottwood@freescale.com>
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
|
|
Some 85xx silicons like MPC8536 and P1022 have a JOG feature, which provides
a dynamic mechanism to lower or raise the CPU core clock at runtime.
This patch adds the support to change CPU frequency using the standard
cpufreq interface. The ratio CORE to CCB can be 1:1(except MPC8536), 3:2,
2:1, 5:2, 3:1, 7:2 and 4:1.
Two CPU cores on P1022 must not in the low power state during the frequency
transition. The driver uses a flag to meet the requirement.
The jog mode frequency transition process on the MPC8536 is similar to
the deep sleep process. The driver need save the CPU state and restore
it after CPU warm reset.
Note:
* The I/O peripherals such as PCIe and eTSEC may lose packets during
the jog mode frequency transition.
* The driver doesn't support MPC8536 Rev 1.0 due to a JOG erratum.
Subsequent revisions of MPC8536 have corrected the erratum.
Change-Id: Ic845d93d5d988f920e0779e51bd1c0e57b55f6ba
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
CC: Scott Wood <scottwood@freescale.com>
Cherry-picked-from: 2f84366408da6618befc5fa06ebe46406b787998
Reviewed-on: http://git.am.freescale.net:8181/957
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
|
|
In sleep PM mode, the clocks of e500 core and unused IP blocks is
turned off. IP blocks which are allowed to wake up the processor
are still running.
Some Freescale chips like MPC8536 and P1022 has deep sleep PM mode
in addtion to the sleep PM mode.
While in deep sleep PM mode, additionally, the power supply is
removed from e500 core and most IP blocks. Only the blocks needed
to wake up the chip out of deep sleep are ON.
This patch supports 32-bit and 36-bit address space.
The sleep mode is equal to the Standby state in Linux. The deep sleep
mode is equal to the Suspend-to-RAM state of Linux Power Management.
Command to enter sleep mode.
echo standby > /sys/power/state
Command to enter deep sleep mode.
echo mem > /sys/power/state
Change-Id: Ia4b6b5c33604e0ca6e25f22910c79e75f017f598
Signed-off-by: Dave Liu <daveliu@freescale.com>
Signed-off-by: Li Yang <leoli@freescale.com>
Signed-off-by: Jin Qing <b24347@freescale.com>
Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com>
Cc: Scott Wood <scottwood@freescale.com>
Signed-off-by: Zhao Chenhui <chenhui.zhao@freescale.com>
Cherry-picked-from: 6bdb953773a3b626510af393a3bb0ea59880bfe4
Reviewed-on: http://git.am.freescale.net:8181/954
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-3.x into fbdev-next
Conflicts:
drivers/video/atmel_lcdfb.c
|
|
Instead of using ill-defined numbers (0, 1, and 2) for the monitor port, allow
the user to specify the port by name ("dvi", "lvds", or "dlvds"). This works
on the kernel command line, the module command-line, and the sysfs "monitor"
device.
Note that changing the monitor port does not currently work on the P1022DS,
because the code that talks to the PIXIS FPGA is broken.
Signed-off-by: Timur Tabi <timur@freescale.com>
Acked-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
|
|
Add functions to restart and halt the current partition when running under
the Freescale hypervisor. These functions should be assigned to various
function pointers of the ppc_md structure during the .probe() function for
the board:
ppc_md.restart = fsl_hv_restart;
ppc_md.power_off = fsl_hv_halt;
ppc_md.halt = fsl_hv_halt;
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
MPC5121 DIU configuration/setup as initialized by the boot
loader currently will get lost while booting Linux. As a
result displaying the boot splash is not possible through
the boot process.
To prevent this we reserve configured DIU frame buffer
address range while booting and preserve AOI descriptor
and gamma table so that DIU continues displaying through
the whole boot process. On first open from user space
DIU frame buffer driver releases the reserved frame
buffer area and continues to operate as usual.
Signed-off-by: John Rigby <jcrigby@gmail.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Acked-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
|
|
The advantages of this:
- Don't encourage legacy support;
- Less external symbols, less code to compile-in for !MPC832x_RDB
platforms.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
The main purpose of this patch is to pass 'struct spi_device' to the chip
select handling routines. This is needed so that we could implement
full-fledged OpenFirmware support for this driver.
While at it, also:
- Replace two {de,activate}_cs routines by single cs_contol().
- Don't duplicate platform data callbacks in mpc83xx_spi struct.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Cc: David Brownell <david-b@pacbell.net>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Kumar Gala <galak@gate.crashing.org>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
This is needed to not bother with ugly #ifdefs in the drivers.
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
Early versions of the Freescale DIU framebuffer driver depended on a bootmem
allocation of memory for the video buffer. The need for this feature was
removed in commit 6b51d51a, so now we can remove the platform-specific code
that allocated that memory.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
Basic PM support for 83xx. Standby is implemented as sleep.
Suspend-to-RAM is implemented as "deep sleep" (with the processor
turned off) on 831x.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
Add platform code to support Freescale DIU. The platform code includes
framebuffer memory allocation, pixel format, monitor port, etc.
Signed-off-by: York Sun <yorksun@freescale.com>
Signed-off-by: Timur Tabi <timur@freescale.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
|
|
Signed-off-by: Scott Wood <scottwood@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
On the majority of 85xx & 86xx we have a register that's ability to
assert HRESET_REQ to reset the board. We refactored that code so it
can be shared between both platforms into fsl_soc.c and removed all
the duplication in each platform directory.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
Add helper function to setup SPI bus/device information
Signed-off-by: Anton Vorontsov <avorontsov@ru.mvista.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vitb/linux-2.6-PQ
|
|
This patch causes fsl_soc.h to import the definition of phys_addr_t
itself, rather than relying on its includer to do so.
Signed-off-by: Scott Wood <scott@freescale.com>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
|
This patch contains necessary modifications to support the CPM2 SoC peripherals.
For the time being, those are fs_enet Ethernet driver and cpm_uart serial.
Written initially to support mpc8560, it also suites to the part of the large PQ2
(more specifically, mpc8260) family.
Signed-off-by: Vitaly Bordug <vbordug@ru.mvista.com>
|
|
Parse the flat device tree for devices on Freescale SOC's that we know
about (gianfar, gianfar_mdio, i2c, mpc83xx_wdt). We need to setup
platform devices and platform data for these devices to match arch/ppc
usage.
Also add a helper function (get_immrbase) that reports the base
address of the MMIO registers on the SOC.
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
|
