| Age | Commit message (Collapse) | Author |
|---|
|
The bug in xgmac_mdio_read have been fixed, so remove
the temporary workaround which is no longer needed.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Change-Id: I7d932208ff81bd00f6c761b57c5b1dacf456e48b
Reviewed-on: http://git.am.freescale.net:8181/35748
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Xiaobo Xie <X.Xie@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
There is a bug in xgmac_mdio_read when clear the bit MDIO_STAT_ENC,
which '&' is missed in 'mdio_stat &= ~MDIO_STAT_ENC'.
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
As the 50us delay was not enough and lead to RTL8211F
PHY not working on some T1023RDB boards. so increase
the delay to make it work stably.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Change-Id: Iff011d0b762e087ae401a510c71e06b8181061c5
Reviewed-on: http://git.am.freescale.net:8181/34201
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Read RTL8211F PHY registers(e.g. PHY_ID, MII_STAT1000) will fail
with xgmac_mdio_read on T1023RDB. so add the MDIO timing delay in
xgmac_mdio_read to make it work stably with RTL8211F on T1023RDB.
Signed-off-by: Shengzhou Liu <Shengzhou.Liu@freescale.com>
Change-Id: Ib85b1858d1cca310992b892dd1c86a129c36e7d2
Reviewed-on: http://git.am.freescale.net:8181/33272
Tested-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
Reviewed-by: Honghua Yin <Hong-Hua.Yin@freescale.com>
|
|
Current driver uses a Maximum value for MDIO_HOLD when doing 10G MDIO
access, this is due to an errata A-006260 on T4 rev1.0 which is fixed
on rev2.0, so remove the maximum value to use the default value for rev2.0.
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Change-Id: Ic777ab0ac053b9f0badb3166fd9c5fa3b3be4255
Reviewed-on: http://git.am.freescale.net:8181/11329
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Shruti Kanetkar <Shruti@freescale.com>
Reviewed-by: Jose Rivera <German.Rivera@freescale.com>
|
|
This reverts v3.13-rc3+ (78fd82238d0e5716) to v3.12, except for
commits which I noticed which appear relevant to the SDK.
Signed-off-by: Scott Wood <scottwood@freescale.com>
Conflicts:
arch/powerpc/include/asm/kvm_host.h
arch/powerpc/kvm/book3s_hv_rmhandlers.S
arch/powerpc/kvm/book3s_interrupts.S
arch/powerpc/kvm/e500.c
arch/powerpc/kvm/e500mc.c
arch/powerpc/sysdev/fsl_soc.h
drivers/Kconfig
drivers/cpufreq/ppc-corenet-cpufreq.c
drivers/dma/fsldma.c
drivers/dma/s3c24xx-dma.c
drivers/misc/Makefile
drivers/mmc/host/sdhci-of-esdhc.c
drivers/mtd/devices/m25p80.c
drivers/net/ethernet/freescale/gianfar.h
drivers/platform/Kconfig
drivers/platform/Makefile
drivers/spi/spi-fsl-espi.c
include/crypto/algapi.h
include/linux/netdev_features.h
include/linux/skbuff.h
include/net/ip.h
net/core/ethtool.c
|
|
|
|
commit 3e94c4d20610, which is patch "net/mdio: Program the PHY register
number before initiating a read", which writes a Clause 45 PHY register
outside Clause 45, impacts the access to a Clause 22 PHY, then during
ASF test, error info "mdio_bus ffe5fc000: MDIO read error" can be observed
which causes the ASF failed, so revert it.
Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com>
Change-Id: Ic3c27f625835d6ac1f22028749d7111b0c0f7a48
Reviewed-on: http://git.am.freescale.net:8181/6988
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Tiefei Zang <roy.zang@freescale.com>
Reviewed-by: Shruti Kanetkar <Shruti@freescale.com>
Reviewed-by: Thomas Trefny <Tom.Trefny@freescale.com>
(cherry picked from commit 8f4f55f161d594908d669657aeea2d4a049056d3)
Reviewed-on: http://git.am.freescale.net:8181/7073
Reviewed-by: Emilian Medve <Emilian.Medve@freescale.com>
Tested-by: Emilian Medve <Emilian.Medve@freescale.com>
|
|
Conflicts:
arch/powerpc/boot/dts/b4qds.dts
drivers/crypto/caam/Makefile
|
|
Conflicts:
Documentation/hwmon/ina2xx
arch/powerpc/Kconfig
arch/powerpc/boot/dts/b4860emu.dts
arch/powerpc/boot/dts/b4qds.dtsi
arch/powerpc/boot/dts/fsl/b4si-post.dtsi
arch/powerpc/boot/dts/fsl/qoriq-sec6.0-0.dtsi
arch/powerpc/boot/dts/p1023rdb.dts
arch/powerpc/boot/dts/t4240emu.dts
arch/powerpc/boot/dts/t4240qds.dts
arch/powerpc/configs/85xx/p1023_defconfig
arch/powerpc/configs/corenet32_smp_defconfig
arch/powerpc/configs/corenet64_smp_defconfig
arch/powerpc/configs/mpc85xx_smp_defconfig
arch/powerpc/include/asm/cputable.h
arch/powerpc/include/asm/device.h
arch/powerpc/include/asm/epapr_hcalls.h
arch/powerpc/include/asm/kvm_host.h
arch/powerpc/include/asm/mpic.h
arch/powerpc/include/asm/pci.h
arch/powerpc/include/asm/ppc-opcode.h
arch/powerpc/include/asm/ppc_asm.h
arch/powerpc/include/asm/reg_booke.h
arch/powerpc/kernel/epapr_paravirt.c
arch/powerpc/kernel/process.c
arch/powerpc/kernel/prom.c
arch/powerpc/kernel/setup-common.c
arch/powerpc/kernel/setup_32.c
arch/powerpc/kernel/setup_64.c
arch/powerpc/kernel/smp.c
arch/powerpc/kernel/swsusp_asm64.S
arch/powerpc/kernel/swsusp_booke.S
arch/powerpc/kvm/book3s_pr.c
arch/powerpc/kvm/booke.c
arch/powerpc/kvm/booke.h
arch/powerpc/kvm/e500.c
arch/powerpc/kvm/e500.h
arch/powerpc/kvm/e500_emulate.c
arch/powerpc/kvm/e500mc.c
arch/powerpc/kvm/powerpc.c
arch/powerpc/perf/e6500-pmu.c
arch/powerpc/platforms/85xx/Kconfig
arch/powerpc/platforms/85xx/Makefile
arch/powerpc/platforms/85xx/b4_qds.c
arch/powerpc/platforms/85xx/c293pcie.c
arch/powerpc/platforms/85xx/corenet_ds.c
arch/powerpc/platforms/85xx/corenet_ds.h
arch/powerpc/platforms/85xx/p1023_rds.c
arch/powerpc/platforms/85xx/p2041_rdb.c
arch/powerpc/platforms/85xx/p3041_ds.c
arch/powerpc/platforms/85xx/p4080_ds.c
arch/powerpc/platforms/85xx/p5020_ds.c
arch/powerpc/platforms/85xx/p5040_ds.c
arch/powerpc/platforms/85xx/smp.c
arch/powerpc/platforms/85xx/t4240_qds.c
arch/powerpc/platforms/Kconfig
arch/powerpc/sysdev/Makefile
arch/powerpc/sysdev/fsl_mpic_timer_wakeup.c
arch/powerpc/sysdev/fsl_msi.c
arch/powerpc/sysdev/fsl_pci.c
arch/powerpc/sysdev/fsl_pci.h
arch/powerpc/sysdev/fsl_soc.h
arch/powerpc/sysdev/mpic.c
arch/powerpc/sysdev/mpic_timer.c
drivers/Kconfig
drivers/clk/Kconfig
drivers/clk/clk-ppc-corenet.c
drivers/cpufreq/Kconfig.powerpc
drivers/cpufreq/Makefile
drivers/cpufreq/ppc-corenet-cpufreq.c
drivers/crypto/caam/Kconfig
drivers/crypto/caam/Makefile
drivers/crypto/caam/ctrl.c
drivers/crypto/caam/desc_constr.h
drivers/crypto/caam/intern.h
drivers/crypto/caam/jr.c
drivers/crypto/caam/regs.h
drivers/dma/fsldma.c
drivers/hwmon/ina2xx.c
drivers/iommu/Kconfig
drivers/iommu/fsl_pamu.c
drivers/iommu/fsl_pamu.h
drivers/iommu/fsl_pamu_domain.c
drivers/iommu/fsl_pamu_domain.h
drivers/misc/Makefile
drivers/mmc/card/block.c
drivers/mmc/core/core.c
drivers/mmc/host/sdhci-esdhc.h
drivers/mmc/host/sdhci-pltfm.c
drivers/mtd/nand/fsl_ifc_nand.c
drivers/net/ethernet/freescale/gianfar.c
drivers/net/ethernet/freescale/gianfar.h
drivers/net/ethernet/freescale/gianfar_ethtool.c
drivers/net/phy/at803x.c
drivers/net/phy/phy_device.c
drivers/net/phy/vitesse.c
drivers/pci/msi.c
drivers/staging/Kconfig
drivers/staging/Makefile
drivers/uio/Kconfig
drivers/uio/Makefile
drivers/uio/uio.c
drivers/usb/host/ehci-fsl.c
drivers/vfio/Kconfig
drivers/vfio/Makefile
include/crypto/algapi.h
include/linux/iommu.h
include/linux/mmc/sdhci.h
include/linux/msi.h
include/linux/netdev_features.h
include/linux/phy.h
include/linux/skbuff.h
include/net/ip.h
include/uapi/linux/vfio.h
net/core/ethtool.c
net/ipv4/route.c
net/ipv6/route.c
|
|
xgmac_mdio_read() was not writing the PHY register number causing read
operations to fail:
mdio_bus ffe4f1000: MDIO read error
Signed-off-by: Mandy Lavi <mandy.lavi@freescale.com>
Change-Id: I6444b1ca1d463405ecd689ce923d55c229e8f821
Reviewed-on: http://git.am.freescale.net:8181/6481
Reviewed-by: Emilian Medve <Emilian.Medve@freescale.com>
Tested-by: Review Code-CDREVIEW <CDREVIEW@freescale.com>
Reviewed-by: Thomas Trefny <Tom.Trefny@freescale.com>
|
|
Powerpc is a mess of implicit includes by prom.h. Add the necessary
explicit includes to drivers in preparation of prom.h cleanup.
Signed-off-by: Rob Herring <rob.herring@calxeda.com>
Acked-by: Grant Likely <grant.likely@linaro.org>
|
|
Use the wrapper functions for getting and setting the driver data using
platform_device instead of using dev_{get,set}_drvdata() with &pdev->dev,
so we can directly pass a struct platform_device.
Also, unnecessary dev_set_drvdata() is removed, because the driver core
clears the driver data to NULL after device_release or on probe failure.
Signed-off-by: Jingoo Han <jg1.han@samsung.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
To be squashed with original commit 3c7bc7d99
Signed-off-by: Bogdan Hamciuc <bogdan.hamciuc@freescale.com>
Change-Id: Ifa7cd8d12c4f3f460d1dffbacbd6b7857bb54364
Reviewed-on: http://git.am.freescale.net:8181/1027
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
|
|
The Freescale mEMAC supports operating at 10/100/1000/10G, and
its associated MDIO controller is likewise capable of operating
both Clause 22 and Clause 45 MDIO buses. It is nearly identical
to the MDIO controller on the XGMAC, so we just modify that
driver.
Portions of this driver developed by:
Sandeep Singh <sandeep@freescale.com>
Roy Zang <tie-fei.zang@freescale.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
Change-Id: Ib47ab4a081a9095f7332e96e5eeb0fc7663104dd
Reviewed-on: http://git.am.freescale.net:8181/909
Reviewed-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
Tested-by: Fleming Andrew-AFLEMING <AFLEMING@freescale.com>
|
|
CONFIG_HOTPLUG is going away as an option. As result the __dev*
markings will be going away.
Remove use of __devinit, __devexit_p, __devinitdata, __devinitconst,
and __devexit.
Signed-off-by: Bill Pemberton <wfp5p@virginia.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Similar to fsl_pq_mdio.c, this driver is for the 10G MDIO controller on
Freescale Frame Manager Ethernet controllers.
Signed-off-by: Timur Tabi <timur@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
