summaryrefslogtreecommitdiff
path: root/drivers/video
AgeCommit message (Collapse)Author
2011-11-07Merge branch 'modsplit-Oct31_2011' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux * 'modsplit-Oct31_2011' of git://git.kernel.org/pub/scm/linux/kernel/git/paulg/linux: (230 commits) Revert "tracing: Include module.h in define_trace.h" irq: don't put module.h into irq.h for tracking irqgen modules. bluetooth: macroize two small inlines to avoid module.h ip_vs.h: fix implicit use of module_get/module_put from module.h nf_conntrack.h: fix up fallout from implicit moduleparam.h presence include: replace linux/module.h with "struct module" wherever possible include: convert various register fcns to macros to avoid include chaining crypto.h: remove unused crypto_tfm_alg_modname() inline uwb.h: fix implicit use of asm/page.h for PAGE_SIZE pm_runtime.h: explicitly requires notifier.h linux/dmaengine.h: fix implicit use of bitmap.h and asm/page.h miscdevice.h: fix up implicit use of lists and types stop_machine.h: fix implicit use of smp.h for smp_processor_id of: fix implicit use of errno.h in include/linux/of.h of_platform.h: delete needless include <linux/module.h> acpi: remove module.h include from platform/aclinux.h miscdevice.h: delete unnecessary inclusion of module.h device_cgroup.h: delete needless include <linux/module.h> net: sch_generic remove redundant use of <linux/module.h> net: inet_timewait_sock doesnt need <linux/module.h> ... Fix up trivial conflicts (other header files, and removal of the ab3550 mfd driver) in - drivers/media/dvb/frontends/dibx000_common.c - drivers/media/video/{mt9m111.c,ov6650.c} - drivers/mfd/ab3550-core.c - include/linux/dmaengine.h
2011-11-03Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linusLinus Torvalds
* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (37 commits) MIPS: O32: Provide definition of registers ta0 .. ta3. MIPS: perf: Add Octeon support for hardware perf. MIPS: perf: Add support for 64-bit perf counters. MIPS: perf: Reorganize contents of perf support files. MIPS: perf: Cleanup formatting in arch/mips/kernel/perf_event.c MIPS: Add accessor macros for 64-bit performance counter registers. MIPS: Add probes for more Octeon II CPUs. MIPS: Add more CPU identifiers for Octeon II CPUs. MIPS: XLR, XLS: Add comment for smp setup MIPS: JZ4740: GPIO: Check correct IRQ in demux handler MIPS: JZ4740: GPIO: Simplify IRQ demuxer MIPS: JZ4740: Use generic irq chip MIPS: Alchemy: remove all CONFIG_SOC_AU1??? defines MIPS: Alchemy: kill au1xxx.h header MIPS: Alchemy: clean DMA code of CONFIG_SOC_AU1??? defines MIPS, IDE: Alchem, au1xxx-ide: Remove pb1200/db1200 header dep MIPS: Alchemy: Redo PCI as platform driver MIPS: Alchemy: more base address cleanup MIPS: Alchemy: rewrite USB platform setup. MIPS: Alchemy: abstract USB block control register access ... Fix up trivial conflicts in: arch/mips/alchemy/devboards/db1x00/platform.c drivers/ide/Kconfig drivers/mmc/host/au1xmmc.c drivers/video/Kconfig sound/mips/Kconfig
2011-11-02Merge branch 'next/fixes' of git://git.linaro.org/people/arnd/arm-socLinus Torvalds
* 'next/fixes' of git://git.linaro.org/people/arnd/arm-soc: (28 commits) ARM: pxa/cm-x300: properly set bt_reset pin ARM: mmp: rename SHEEVAD to GPLUGD ARM: imx: Fix typo 'MACH_MX31_3DS_MXC_NAND_USE_BBT' ARM: i.MX28: shift frac value in _CLK_SET_RATE plat-mxc: iomux-v3.h: implicitly enable pull-up/down when that's desired ARM: mx5: fix clock usage for suspend ARM: pxa: use correct __iomem annotations ARM: pxa: sharpsl pm needs SPI ARM: pxa: centro and treo680 need palm27x ARM: pxa: make pxafb_smart_*() empty when not enabled ARM: pxa: select POWER_SUPPLY on raumfeld ARM: pxa: pxa95x is incompatible with earlier pxa ARM: pxa: CPU_FREQ_TABLE is needed for CPU_FREQ ARM: pxa: pxa95x/saarb depends on pxa3xx code ARM: pxa: allow selecting just one of TREO680/CENTRO ARM: pxa: export symbols from pxa3xx-ulpi ARM: pxa: make zylonite_pxa*_init declaration match code ARM: pxa/z2: fix building error of pxa27x_cpu_suspend() no longer available ARM: at91: add defconfig for at91sam9g45 family ARM: at91: remove dependency for Atmel PWM driver selector in Kconfig ...
2011-11-01backlight: rename corgibl_limit_intensity() to genericbl_limit_intensity()Axel Lin
The rename of corgibl_limit_intensity is missed in commit d00ba726 ("backlight: Rename the corgi backlight driver to generic"). Let's fix it now. Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-01drivers/video/backlight/l4f00242t03.c: use gpio_request_one() to simplify ↵Fabio Estevam
error handling Using gpio_request_one can make the error handling simpler. Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-01backlight: fix broken regulator API usage in l4f00242t03Mark Brown
The regulator support in the l4f00242t03 is very non-idiomatic. Rather than requesting the regulators based on the device name and the supply names used by the device the driver requires boards to pass system specific supply names around through platform data. The driver also conditionally requests the regulators based on this platform data, adding unneeded conditional code to the driver. Fix this by removing the platform data and converting to the standard idiom, also updating all in tree users of the driver. As no datasheet appears to be available for the LCD I'm guessing the names for the supplies based on the existing users and I've no ability to do anything more than compile test. The use of regulator_set_voltage() in the driver is also problematic, since fixed voltages are required the expectation would be that the voltages would be fixed in the constraints set by the machines rather than manually configured by the driver, but is less problematic. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Tested-by: Fabio Estevam <fabio.estevam@freescale.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-11-01video/backlight: remove obsolete cleanup for clientdataWolfram Sang
A few new i2c-drivers came into the kernel which clear the clientdata-pointer on exit or error. This is obsolete meanwhile, the core will do it. Signed-off-by: Wolfram Sang <w.sang@pengutronix.de> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Paul Mundt <lethal@linux-sh.org> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-10-31video: Add module.h to drivers/video files who really use it.Paul Gortmaker
They were getting this implicitly by an include of module.h from device.h -- but we are going to clean that up and break that include chain, so include module.h explicitly now. [ with contributions from Axel Lin <axel.lin@gmail.com> ] Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31video: Add export.h for THIS_MODULE/EXPORT_SYMBOL to drivers/videoPaul Gortmaker
With module.h being implicitly everywhere via device.h, the absence of explicitly including something for EXPORT_SYMBOL went unnoticed. Since we are heading to fix things up and clean module.h from the device.h file, we need to explicitly include these files now. Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2011-10-31Merge branch 'depends/rmk/gpio' into next/fixesArnd Bergmann
This sorts out merge conflicts with the arm/gpio branch that already got merged into mainline Linux. Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2011-10-30Merge branch 'fbdev-next' of git://github.com/schandinat/linux-2.6Linus Torvalds
* 'fbdev-next' of git://github.com/schandinat/linux-2.6: (270 commits) video: platinumfb: Add __devexit_p at necessary place drivers/video: fsl-diu-fb: merge diu_pool into fsl_diu_data drivers/video: fsl-diu-fb: merge diu_hw into fsl_diu_data drivers/video: fsl-diu-fb: only DIU modes 0 and 1 are supported drivers/video: fsl-diu-fb: remove unused panel operating mode support drivers/video: fsl-diu-fb: use an enum for the AOI index drivers/video: fsl-diu-fb: add several new video modes drivers/video: fsl-diu-fb: remove broken screen blanking support drivers/video: fsl-diu-fb: move some definitions out of the header file drivers/video: fsl-diu-fb: fix some ioctls video: da8xx-fb: Increased resolution configuration of revised LCDC IP OMAPDSS: picodlp: add missing #include <linux/module.h> fb: fix au1100fb bitrot. mx3fb: fix NULL pointer dereference in screen blanking. video: irq: Remove IRQF_DISABLED smscufx: change edid data to u8 instead of char OMAPDSS: DISPC: zorder support for DSS overlays OMAPDSS: DISPC: VIDEO3 pipeline support OMAPDSS/OMAP_VOUT: Fix incorrect OMAP3-alpha compatibility setting video/omap: fix build dependencies ... Fix up conflicts in: - drivers/staging/xgifb/XGI_main_26.c Changes to XGIfb_pan_var() - drivers/video/omap/{lcd_apollon.c,lcd_ldp.c,lcd_overo.c} Removed (or in the case of apollon.c, merged into the generic DSS panel in drivers/video/omap2/displays/panel-generic-dpi.c)
2011-10-27Merge branch 'clk' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'clk' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: ARM: 7131/1: clkdev: Add Common Macro for clk_lookup clk: spi-pl022: convert to clk_prepare()/clk_unprepare() clk: timer-sp: convert to clk_prepare()/clk_unprepare() clk: sa1111: convert to clk_prepare()/clk_unprepare() clk: mmci: convert to clk_prepare()/clk_unprepare() clk: amba-pl011: convert to clk_prepare()/clk_unprepare() clk: amba-pl010: convert to clk_prepare()/clk_unprepare() clk: amba-clcd: convert to clk_prepare()/clk_unprepare() clk: amba bus: convert to clk_prepare()/clk_unprepare() clk: provide prepare/unprepare functions
2011-10-27Merge branch 'gpio' of ↵Linus Torvalds
http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm * 'gpio' of http://ftp.arm.linux.org.uk/pub/linux/arm/kernel/git-cur/linux-2.6-arm: (43 commits) ARM: 7135/1: ep93xx: bring back missing <mach/gpio.h> ARM: 7104/1: plat-pxa: break out GPIO driver specifics ARM: 7103/1: plat-pxa: move PXA GPIO driver to GPIO subsystem ARM: 7042/3: mach-ep93xx: break out GPIO driver specifics ARM: 7101/1: arm/tegra: Replace <mach/gpio.h> with <mach/gpio-tegra.h> ARM: 7094/1: arm/tegra: Move EN_VDD_1V05_GPIO to board-harmony.h ARM: 7083/1: rewrite U300 GPIO to use gpiolib ARM: 7074/1: gpio: davinci: eliminate unused variable warnings ARM: 7063/1: Orion: gpio: add missing include of linux/types.h ARM: 7055/1: arm/tegra: mach/gpio.h: include linux/types.h to fix build ARM: 7054/1: arm/tegra: Delete custom gpio_to_irq, and irq_to_gpio ARM: 7053/1: gpio/tegra: Implement gpio_chip.to_irq ARM: 7052/1: gpio/tegra: Remove use of irq_to_gpio ARM: 7057/1: mach-pnx4008: rename GPIO header ARM: 7056/1: plat-nomadik: kill off <plat/gpio.h> ARM: 7050/1: mach-sa1100: delete irq_to_gpio() function ARM: 7049/1: mach-sa1100: move SA1100 GPIO driver to GPIO subsystem ARM: 7045/1: mach-lpc32xx: break out GPIO driver specifics ARM: 7044/1: mach-lpc32xx: move LPC32XX GPIO driver to GPIO subsystem ARM: 7043/1: mach-ixp2000: rename GPIO header ... Fix up trivial conflicts in arch/arm/mach-u300/Kconfig manually
2011-10-26Merge branch 'core-locking-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip * 'core-locking-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (27 commits) rtmutex: Add missing rcu_read_unlock() in debug_rt_mutex_print_deadlock() lockdep: Comment all warnings lib: atomic64: Change the type of local lock to raw_spinlock_t locking, lib/atomic64: Annotate atomic64_lock::lock as raw locking, x86, iommu: Annotate qi->q_lock as raw locking, x86, iommu: Annotate irq_2_ir_lock as raw locking, x86, iommu: Annotate iommu->register_lock as raw locking, dma, ipu: Annotate bank_lock as raw locking, ARM: Annotate low level hw locks as raw locking, drivers/dca: Annotate dca_lock as raw locking, powerpc: Annotate uic->lock as raw locking, x86: mce: Annotate cmci_discover_lock as raw locking, ACPI: Annotate c3_lock as raw locking, oprofile: Annotate oprofilefs lock as raw locking, video: Annotate vga console lock as raw locking, latencytop: Annotate latency_lock as raw locking, timer_stats: Annotate table_lock as raw locking, rwsem: Annotate inner lock as raw locking, semaphores: Annotate inner lock as raw locking, sched: Annotate thread_group_cputimer as raw ... Fix up conflicts in kernel/posix-cpu-timers.c manually: making cputimer->cputime a raw lock conflicted with the ABBA fix in commit bcd5cff7216f ("cputimer: Cure lock inversion").
2011-10-24MIPS: Alchemy: remove all CONFIG_SOC_AU1??? definesManuel Lauss
Now that no driver any longer depends on the CONFIG_SOC_AU1??? symbols, it's time to get rid of them: Move some of the platform devices to the boards which can use them, Rename a few (unused) constants in the header, Replace them with MIPS_ALCHEMY in the various Kconfig files. Finally delete them altogether from the Alchemy Kconfig file. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> To: Linux-MIPS <linux-mips@linux-mips.org> Patchwork: https://patchwork.linux-mips.org/patch/2707/ Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2011-10-15video: platinumfb: Add __devexit_p at necessary placeAxel Lin
According to the comments in include/linux/init.h: "Pointers to __devexit functions must use __devexit_p(function_name), the wrapper will insert either the function_name or NULL, depending on the config options." We have __devexit annotation for platinumfb_remove(), thus add __devexit_p at necessary place. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-10-15Merge branch 'for-florian' of git://gitorious.org/linux-omap-dss2/linux into ↵Florian Tobias Schandinat
fbdev-next
2011-10-15Merge commit 'v3.1-rc9' into fbdev-nextFlorian Tobias Schandinat
2011-10-08ARM: pxa: use correct __iomem annotationsArnd Bergmann
This tries to clear up the confusion between integers and iomem pointers in the marvell pxa platform. MMIO addresses are supposed to be __iomem* values, in order to let the Linux type checking work correctly. This patch moves the cast to __iomem as far back as possible, to the place where the MMIO virtual address windows are defined. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-10-08ARM: pxa: make pxafb_smart_*() empty when not enabledEric Miao
Reported-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2011-10-05drivers/video: fsl-diu-fb: merge diu_pool into fsl_diu_dataTimur Tabi
The diu_pool structure contains diu_addr objects for various objects allocated in DMA space that are used by the DIU, but the only instance of this structure is a global variable, 'pool'. Eliminate 'pool' by merging its fields into the fsl_diu_data structure, which is instantiated on the heap for each DIU controller found. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-10-05drivers/video: fsl-diu-fb: merge diu_hw into fsl_diu_dataTimur Tabi
The diu_hw structure contains two fields used to access the DIU registers, but the only instance of this structure is a global variable, 'dr'. Eliminate 'dr' by merging its fields into the fsl_diu_data structure, which is instantiated on the heap for each DIU controller found. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-10-05drivers/video: fsl-diu-fb: only DIU modes 0 and 1 are supportedTimur Tabi
The Freescale DIU video controller supports five video "modes", but only the first two are used by the driver. The other three are special modes that don't make sense for a framebuffer driver. Therefore, there's no point in keeping a global variable that indicates which mode we're supposed to use. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-10-05drivers/video: fsl-diu-fb: remove unused panel operating mode supportTimur Tabi
The MFB_TYPE_xxx macros indicate different "operating modes" of each AOI, but this feature is not actually used in the driver. The mfb_index.type field is always set to MFB_TYPE_OUTPUT, so just delete it and any code that references it. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-10-05drivers/video: fsl-diu-fb: use an enum for the AOI indexTimur Tabi
Each of the five AOIs created by the DIU driver has a special purpose, and they're not treated equally. It makes sense to identify them with an enum instead of a hard-coded number. Since the 'index' is now an enum, it can only contain allowed values, so there's no need to check for an invalid value. This simplifies some other code, such as fsl_diu_disable_panel(), which no longer needs to return an error code. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-10-05drivers/video: fsl-diu-fb: add several new video modesTimur Tabi
Add the following new video modes to the Freescale DIU framebuffer driver: 640x480x60 640x480x72 640x480x75 640x480x90 640x480x100 800x480x60 800x600x60 854x480x60 1280x480x60 1280x720x60 1920x1080x60 Also add margin data to the 320x240 video mode. This mode was originally intended only for the AOIs (overlays) used on planes two and three, but with real margin data, it can now be used as an actual video mode. Video mode data is from earlier work done by Jerry Huang <Chang-Ming.Huang@freescale.com>. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-10-05drivers/video: fsl-diu-fb: remove broken screen blanking supportTimur Tabi
The function which is supposed to provide screen blanking support doesn't actually do anything, so the framebuffer layer thinks the screen has been blanked when it really isn't. Remove the code completely for now. A side-effect of this change is that the framebuffer console blanking now works correctly. Presumably this is because the console now receives -EINVAL instead of '0' when it asks the driver to blank the screen, so the console does it manually now. A signficant refactoring of the driver is planned, and proper hardware blanking support will added afterwards. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-10-05drivers/video: fsl-diu-fb: move some definitions out of the header fileTimur Tabi
Move several macros and structures from the Freescale DIU driver's header file into the source file, because they're only used by that file. Also delete a few unused macros. The diu and diu_ad structures cannot be moved because they're being used by the MPC5121 platform file. A future patch eliminate the need for the platform file to access these structs, so they'll be moved also. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-10-05drivers/video: fsl-diu-fb: fix some ioctlsTimur Tabi
Use the _IOx macros to define the ioctl commands, instead of hard-coded numbers. Unfortunately, the original definitions of MFB_SET_PIXFMT and MFB_GET_PIXFMT used the wrong value for the size, so these macros have new values now. To avoid breaking binary compatibility with older applications, we retain support for the original values, but the driver displays a warning message if they're used. Also remove the FBIOGET_GWINFO and FBIOPUT_GWINFO ioctls. FBIOPUT_GWINFO was never implemented, and FBIOGET_GWINFO was never used by any application. Signed-off-by: Timur Tabi <timur@freescale.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-10-04Merge branch 'viafb-next' of git://github.com/schandinat/linux-2.6 into ↵Florian Tobias Schandinat
fbdev-next
2011-10-04video: da8xx-fb: Increased resolution configuration of revised LCDC IPManjunathappa, Prakash
Revised LCD controller in upcoming TI SoC which is an updated version of LCDC IP that was found on TI's DA850 SoC supports 2048*2048 resolution. Below are the encoding details: Width: Pixels Per Line = {pplmsb, ppllsb, 4'b1111} + 1 Where pplmsb:1bit==>Raster Timing0[3], ppllsb:6bits==>Raster Timing0[9:4]. And encoded value can range from 16 to 2048 in multiples of 16. Height: Lines Per Panel = {lpp_b10, lpp} Where lpp:10bits==>Raster Timing1[9:0], lpp_b10:1bit==>Raster Timing2[26]. And encoded value can range from 1 to 2048, programmable range is 0 to 2047. Patch is verified on emulation platform of upcoming SoC for updated feature and on DA850 platform to make sure nothing existing breaks. Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-10-04OMAPDSS: picodlp: add missing #include <linux/module.h>Tomi Valkeinen
Compiling panel-picodlp.c failed with: drivers/video/omap2/displays/panel-picodlp.c:560:12: error: 'THIS_MODULE' undeclared here (not in a function) Add #include <linux/module.h> to get THIS_MODULE definition. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-10-03fb: fix au1100fb bitrot.Manuel Lauss
Removes some bitrot from the au1100fb driver and fix it up so it works again. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-10-03mx3fb: fix NULL pointer dereference in screen blanking.Wolfram Stering
When blanking an already blanked framebuffer, a kernel NULL pointer dereference occurred, because mx3fb driver handles all kinds of screen blanking (normal, vsync suspend, powerdown) in the same way. Certain programs (Xorg X11 server) first do a normal blank, followed by a powerdown blank, which triggered the bug. Add an additional safeguard and make sdc_disable_channel() safe against multiple calls independent of other logic. Signed-off-by: Michael Thalmeier <michael.thalmeier@hale.at> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-10-03video: irq: Remove IRQF_DISABLEDYong Zhang
Since commit [e58aa3d2: genirq: Run irq handlers with interrupts disabled], We run all interrupt handlers with interrupts disabled and we even check and yell when an interrupt handler returns with interrupts enabled (see commit [b738a50a: genirq: Warn when handler enables interrupts]). So now this flag is a NOOP and can be removed. Signed-off-by: Yong Zhang <yong.zhang0@gmail.com> Acked-by: David Brown <davidb@codeaurora.org> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-10-03smscufx: change edid data to u8 instead of charDan Carpenter
Having "edid" as char caused a problem in ufx_read_edid() where we compared "edid[i] != 0xFF". Because of the type difference, the condition was never true and the error checking failed. Also I added a __user notation to silence a sparse complaint. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-10-03OMAPDSS: DISPC: zorder support for DSS overlaysArchit Taneja
Add zorder support on OMAP4, this feature allows deciding the visibility order of the overlays based on the zorder value provided as an overlay info parameter or a sysfs attribute of the overlay object. Use the overlay cap OMAP_DSS_OVL_CAP_ZORDER to determine whether zorder is supported for the overlay or not. Use dss feature FEAT_ALPHA_FREE_ZORDER if the caps are not available. Ensure that all overlays that are enabled and connected to the same manager have different zorders. Swapping zorders of 2 enabled overlays currently requires disabling one of the overlays. Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-10-03OMAPDSS: DISPC: VIDEO3 pipeline supportArchit Taneja
Add support for VIDEO3 pipeline on OMAP4: - Add VIDEO3 pipeline information in dss_features and omapdss.h - Add VIDEO3 pipeline register coefficients in dispc.h - Create a new overlay structure corresponding to VIDEO3. - Make changes in dispc.c for VIDEO3 Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-10-03OMAPDSS/OMAP_VOUT: Fix incorrect OMAP3-alpha compatibility settingArchit Taneja
On OMAP3, in order to enable alpha blending for LCD and TV managers, we needed to set LCDALPHABLENDERENABLE/TVALPHABLENDERENABLE bits in DISPC_CONFIG. On OMAP4, alpha blending is always enabled by default, if the above bits are set, we switch to an OMAP3 compatibility mode where the zorder values in the pipeline attribute registers are ignored and a fixed priority is configured. Rename the manager_info member "alpha_enabled" to "partial_alpha_enabled" for more clarity. Introduce two dss_features FEAT_ALPHA_FIXED_ZORDER and FEAT_ALPHA_FREE_ZORDER which represent OMAP3-alpha compatibility mode and OMAP4 alpha mode respectively. Introduce an overlay cap for ZORDER. The DSS2 user is expected to check for the ZORDER cap, if an overlay doesn't have this cap, the user is expected to set the parameter partial_alpha_enabled. If the overlay has ZORDER cap, the DSS2 user can assume that alpha blending is already enabled. Don't support OMAP3 compatibility mode for now. Trying to read/write to alpha_blending_enabled sysfs attribute issues a warning for OMAP4 and does not set the LCDALPHABLENDERENABLE/TVALPHABLENDERENABLE bits. Change alpha_enabled to partial_alpha_enabled in the omap_vout driver. Use overlay cap "OMAP_DSS_OVL_CAP_GLOBAL_ALPHA" to check if overlay supports alpha blending or not. Replace this with checks for VIDEO1 pipeline. Cc: linux-media@vger.kernel.org Cc: Lajos Molnar <molnar@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Acked-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-10-03video/omap: fix build dependenciesArnd Bergmann
Four of the LCD panel drivers depend on the backlight class, so add the dependency in Kconfig. Selecting the BACKLIGHT_CLASS_DEVICE symbol does not generally work since it has other dependencies. Signed-off-by: Arnd Bergmann <arnd@arndb.de> [tomi.valkeinen@ti.com: changed also N8x0 panel] Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAPDSS: remove vaddr from overlay infoTomi Valkeinen
overlay_info struct, used to configure overlays, currently includes both physical and virtual addresses for the pixels. The vaddr was added to support more exotic configurations where CPU would be used to update a display, but it is not currently used and there has been no interest in the feature. Using CPU to update a screen is also less interesting now that OMAP4 has two LCD outputs. This patch removes the vaddr field, and modifies the users of omapdss accordingly. This makes the use of omapdss a bit simpler, as the user doesn't need to think if it needs to give the vaddr. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAPDSS: HDMI: Add support to dump registers through debugfsMythri P K
Add support to dump the HDMI wrapper, core, PLL and PHY registers through debugfs. Signed-off-by: Mythri P K <mythripk@ti.com> [tomi.valkeinen@ti.com: updated the description] Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAPDSS: HDMI: Add missing register definitionsMythri P K
Add some of the missing register definitions, which are h/w indexable. Signed-off-by: Mythri P K <mythripk@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAPDSS: HDMI: Replace hdmi_reg struct with u16Mythri P K
Remove usage of hdmi_reg struct to use u16 instead in the HDMI IP header file. hdmi_reg struct is not really needed, and the same change was also made for dispc earlier. Signed-off-by: Mythri P K <mythripk@ti.com> [tomi.valkeinen@ti.com: updated the description] Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAPDSS: HDMI: Move the comments in avi infoframeMythri P K
Move the comments in AVI infoframe structure above each parameter to align with other comments in the header file. Signed-off-by: Mythri P K <mythripk@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAPDSS: Add N800 panel driverTomi Valkeinen
This is a driver for N800's display, ported from the old omapfb. This is a slightly lighter version of the driver as not all features of the old driver can be ported without big changes to DSS2, and also because some of the HW features used in the old driver are unclear (e.g. the power management part). That said, the new driver works fine for basic use. Architecturally the driver is not as neat as it could be. N800's display HW consists of a display buffer chip and a panel, and ideally they would be represented by separate, independent drivers. This is not currently possible, and this driver contains both buffer chip and panel driver. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAPDSS: Port the Apollon display driver to DSS2Tomi Valkeinen
Port the old omapfb panel driver for Apollon to DSS2. Cc: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAPDSS: Port the H4 display driver to DSS2Tomi Valkeinen
Port the old omapfb panel driver for H4 to DSS2. Cc: Imre Deak <imre.deak@nokia.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAPDSS: Port 2430sdp display driver to DSS2Tomi Valkeinen
Port the old omapfb panel driver for 2430SDP to DSS2. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2011-09-30OMAPFB: Remove unused lcd driversTomi Valkeinen
drivers/video/omap/ contains some lcd drivers which are not used by any board. They can be removed. Cc: Arun C <arunedarath@mistralsolutions.com> Acked-by: Koen Kooi <koen@openembedded.org> Acked-by: Steve Sakoman <steve@sakoman.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>