summaryrefslogtreecommitdiff
path: root/drivers/video
AgeCommit message (Collapse)Author
2011-03-18Merge branch 'for-linus' of git://codeaurora.org/quic/kernel/davidb/linux-msmLinus Torvalds
* 'for-linus' of git://codeaurora.org/quic/kernel/davidb/linux-msm: (46 commits) msm: scm: Check for interruption immediately msm: scm: Fix improper register assignment msm: scm: Mark inline asm as volatile msm: iommu: Enable HTW L2 redirection on MSM8960 msm: iommu: Don't read from write-only registers msm: iommu: Remove dependency on IDR msm: iommu: Use ASID tagging instead of VMID tagging msm: iommu: Rework clock logic and add IOMMU bus clock control msm: iommu: Clock control for the IOMMU driver msm: mdp: Set the correct pack pattern for XRGB/ARGB msm_fb: Fix framebuffer console msm: mdp: Add support for RGBX 8888 image format. video: msmfb: Put the partial update magic value into the fix_screen struct. msm: clock: Migrate to clkdev msm: clock: Remove references to clk_ops_pcom msm: headsmp.S: Fix section mismatch msm: Use explicit GPLv2 licenses msm: iommu: Enable IOMMU support for MSM8960 msm: iommu: Generalize platform data for multiple targets msm: iommu: Create a Kconfig item for the IOMMU driver ...
2011-03-18Merge branch 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'devel-stable' of master.kernel.org:/home/rmk/linux-2.6-arm: (289 commits) davinci: DM644x EVM: register MUSB device earlier davinci: add spi devices on tnetv107x evm davinci: add ssp config for tnetv107x evm board davinci: add tnetv107x ssp platform device spi: add ti-ssp spi master driver mfd: add driver for sequencer serial port ARM: EXYNOS4: Implement Clock gating for System MMU ARM: EXYNOS4: Enhancement of System MMU driver ARM: EXYNOS4: Add support for gpio interrupts ARM: S5P: Add function to register gpio interrupt bank data ARM: S5P: Cleanup S5P gpio interrupt code ARM: EXYNOS4: Add missing GPYx banks ARM: S3C64XX: Fix section mismatch from cpufreq init ARM: EXYNOS4: Add keypad device to the SMDKV310 ARM: EXYNOS4: Update clocks for keypad ARM: EXYNOS4: Update keypad base address ARM: EXYNOS4: Add keypad device helpers ARM: EXYNOS4: Add support for SATA on ARMLEX4210 plat-nomadik: make GPIO interrupts work with cpuidle ApSleep mach-u300: define a dummy filter function for coh901318 ... Fix up various conflicts in - arch/arm/mach-exynos4/cpufreq.c - arch/arm/mach-mxs/gpio.c - drivers/net/Kconfig - drivers/tty/serial/Kconfig - drivers/tty/serial/Makefile - drivers/usb/gadget/fsl_mxc_udc.c - drivers/video/Kconfig
2011-03-18Merge branches 'defcfg', 'drivers' and 'cyberpro-next' of ↵Linus Torvalds
master.kernel.org:/home/rmk/linux-2.6-arm * 'defcfg' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6647/1: add Versatile Express defconfig ARM: 6644/1: mach-ux500: update the U8500 defconfig * 'drivers' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6764/1: pl011: factor out FIFO to TTY code ARM: 6763/1: pl011: add optional RX DMA to PL011 v2 ARM: 6758/1: amba: support pm ops ARM: amba: make amba_driver id_table const ARM: amba: make internal ID table handling const ARM: amba: make probe() functions take const id tables ARM: 6662/1: amba: make amba_bustype non-static ARM: mmci: add dmaengine-based DMA support ARM: mmci: no need for separate host->data_xfered ARM: mmci: avoid unnecessary switch to data available PIO interrupts ARM: mmci: no need to call flush_dcache_page() with sg_miter API ARM: mmci: avoid reporting too many completed bytes on fifo overrun ALSA: AACI: make fifo variables more explanitory ALSA: AACI: no need to call snd_pcm_period_elapsed() for each period ALSA: AACI: use snd_pcm_lib_period_bytes() ALSA: AACI: clean up AACI announcement printk ALSA: AACI: fix channel mask selection ALSA: AACI: fix number of channels for record ALSA: AACI: fix multiple IRQ claiming * 'cyberpro-next' of master.kernel.org:/home/rmk/linux-2.6-arm: VIDEO: cyberpro: remove unused cyber2000fb_get_fb_var() VIDEO: cyberpro: remove useless function extreg pointers VIDEO: cyberpro: update handling of device structures VIDEO: cyberpro: add support for video capture I2C VIDEO: cyberpro: make 'reg_b0_lock' always present VIDEO: cyberpro: add I2C support VIDEO: cyberpro: select lowest multipler/divisor for PLL
2011-03-17Merge branch 'for_linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32 * 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/epip/linux-2.6-unicore32: (40 commits) unicore32: rewrite arch-specific tlb.h to use asm-generic version unicore32: modify io_p2v and io_v2p macros, and adjust PKUNITY_mmio_BASEs unicore32: replace unicore32-specific iomap functions with generic lib implementation unicore32 machine related: add frame buffer driver for pkunity-v3 soc unicore32 machine related files: add i2c bus drivers for pkunity-v3 soc unicore32 io: redefine __REG(x) and re-use readl/writel funcs unicore32 i8042 upgrade and bugfix: adjust resource request region type unicore32 upgrade to v2.6.38-rc5: add one more paramter for pte_alloc_map call unicore32 i8042: adjust io funcs of i8042-unicore32io.h unicore32: rename PKUNITY_IOSPACE_BASE to PKUNITY_MMIO_BASE unicore32: modify function names and parameters for irq_chips unicore32: remove unused lines in arch/unicore32/include/asm/irq.h unicore32 time.c: change calculate method for clock_event_device unicore32: ADD MAINTAINER for unicore32 architecture unicore32 machine related files: ps2 driver unicore32 machine related files: pci bus handling unicore32 machine related files: hardware registers unicore32 machine related files: core files unicore32 additional architecture files: boot process unicore32 additional architecture files: low-level lib: misc ... Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-03-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: fbdev: sh_mobile_lcdc: Add YUV framebuffer support viafb: split pll configs up viafb: remove duplicated clock storage viafb: always return the best possible clock viafb: remove duplicated clock information fbdev: sh_mobile_lcdcfb: add backlight support viafb: factor lcd scaling parameters out viafb: strip some structures viafb: remove unused data_mode and device_type viafb: kill lcd_panel_id video via: make local variables static video via: fix iomem access video/via: drop deprecated (and unused) i2c_adapter.id
2011-03-17Merge branches 'aaci', 'mmci-dma', 'pl' and 'pl011' into driversRussell King
2011-03-17Merge remote branch 'rmk/for-linus' into for-linusDavid Brown
* rmk/for-linus: (1557 commits) ARM: 6806/1: irq: introduce entry and exit functions for chained handlers ARM: 6781/1: Thumb-2: Work around buggy Thumb-2 short branch relocations in gas ARM: 6747/1: P2V: Thumb2 support ARM: 6798/1: aout-core: zero thread debug registers in a.out core dump ARM: 6796/1: Footbridge: Fix I/O mappings for NOMMU mode ARM: 6784/1: errata: no automatic Store Buffer drain on Cortex-A9 ARM: 6772/1: errata: possible fault MMU translations following an ASID switch ARM: 6776/1: mach-ux500: activate fix for errata 753970 ARM: 6794/1: SPEAr: Append UL to device address macros. ARM: 6793/1: SPEAr: Remove unused *_SIZE macros from spear*.h files ARM: 6792/1: SPEAr: Replace SIZE macro's with SZ_4K macros ARM: 6791/1: SPEAr3xx: Declare device structures after shirq code ARM: 6790/1: SPEAr: Clock Framework: Rename usbd clock and align apb_clk entry ARM: 6789/1: SPEAr3xx: Rename sdio to sdhci ARM: 6788/1: SPEAr: Include mach/hardware.h instead of mach/spear.h ARM: 6787/1: SPEAr: Reorder #includes in .h & .c files. ARM: 6681/1: SPEAr: add debugfs support to clk API ARM: 6703/1: SPEAr: update clk API support ARM: 6679/1: SPEAr: make clk API functions more generic ARM: 6737/1: SPEAr: formalized timer support ... Conflicts: arch/arm/mach-msm/board-msm7x27.c arch/arm/mach-msm/board-msm7x30.c arch/arm/mach-msm/board-qsd8x50.c arch/arm/mach-msm/board-sapphire.c arch/arm/mach-msm/include/mach/memory.h
2011-03-17Merge branch 'remove' of master.kernel.org:/home/rmk/linux-2.6-armLinus Torvalds
* 'remove' of master.kernel.org:/home/rmk/linux-2.6-arm: ARM: 6629/2: aaec2000: remove support for mach-aaec2000 ARM: lh7a40x: remove unmaintained platform support Fix up trivial conflicts in - arch/arm/mach-{aaec2000,lh7a40x}/include/mach/memory.h (removed) - drivers/usb/gadget/Kconfig (USB_[GADGET_]LH7A40X removed, others added)
2011-03-17unicore32 machine related: add frame buffer driver for pkunity-v3 socGuanXuetao
change from original version -- by advice of Paul Mundt 1. remove videomemorysize definitions 2. remove unifb_enable and unifb_setup 3. use dev_warn instead of printk in fb driver 4. remove judgement for FB_ACCEL_PUV3_UNIGFX 5. adjust clk_get and clk_set_rate calls 6. add resources definitions 7. remove unifb_option 8. adjust register for platform_device 9. adjust unifb_ops position and unifb_regs assignment position Signed-off-by: Guan Xuetao <gxt@mprc.pku.edu.cn> Acked-by: Arnd Bergmann <arnd@arndb.de>
2011-03-17Merge branch 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6Linus Torvalds
* 'devicetree/next' of git://git.secretlab.ca/git/linux-2.6: (21 commits) tty: serial: altera_jtaguart: Add device tree support tty: serial: altera_uart: Add devicetree support dt: eliminate of_platform_driver shim code dt: Eliminate of_platform_{,un}register_driver dt/serial: Eliminate users of of_platform_{,un}register_driver dt/usb: Eliminate users of of_platform_{,un}register_driver dt/video: Eliminate users of of_platform_{,un}register_driver dt/net: Eliminate users of of_platform_{,un}register_driver dt/sound: Eliminate users of of_platform_{,un}register_driver dt/spi: Eliminate users of of_platform_{,un}register_driver dt: uartlite: merge platform and of_platform driver bindings dt: xilinx_hwicap: merge platform and of_platform driver bindings ipmi: convert OF driver to platform driver leds/leds-gpio: merge platform_driver with of_platform_driver dt/sparc: Eliminate users of of_platform_{,un}register_driver dt/powerpc: Eliminate users of of_platform_{,un}register_driver dt/powerpc: move of_bus_type infrastructure to ibmebus drivercore/dt: add a match table pointer to struct device dt: Typo fix. altera_ps2: Add devicetree support ...
2011-03-16Merge branch 'viafb-next' of git://github.com/schandinat/linux-2.6Paul Mundt
2011-03-16fbdev: sh_mobile_lcdc: Add YUV framebuffer supportDamian Hobson-Garcia
Supports YCbCr420sp, YCbCr422sp, and YCbCr44sp, formats (bpp = 12, 16, and 24) respectively. When double-buffering both Y planes appear before the C planes (Y-Y-C-C), as opposed to Y-C-Y-C. Set .nonstd in struct sh_mobile_lcdc_chan_cfg to enable YUV mode, and use .bpp to distiguish between the 3 modes. The value of .nonstd is copied to bits 16-31 of LDDFR in the LCDC and should be set accordingly. .nonstd must be set to 0 for RGB mode. Due to the encoding of YUV data, the framebuffer will clear to green instead of black. In YUV 420 mode, panning is only possible in 2 line increments. Additionally in YUV 420 mode the vertical resolution of the framebuffer must be an even number. Signed-off-by: Damian Hobson-Garcia <dhobsong@igel.co.jp> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-12Merge branch 'viafb-pll' into viafb-nextFlorian Tobias Schandinat
2011-03-12Merge branch 'master' of ↵Russell King
git://git.kernel.org/pub/scm/linux/kernel/git/tglx/linux-2.6-tcc into devel-stable
2011-03-12viafb: split pll configs upFlorian Tobias Schandinat
This patch splits the pll configs up on pll versions. This allows easy adding of other known good pll values. Additionally it made it possible to remove invalid configurations resulting in better behaviour for such cases. The resulting clocks are no longer stored resulting in some computing overhead on each mode change. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-03-12viafb: remove duplicated clock storageFlorian Tobias Schandinat
The clocks can be easily recalculated by the timing and refresh value. This brings us one step closer to removing VIAs modetable and use generic ones and being easier extensible. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-03-12viafb: always return the best possible clockFlorian Tobias Schandinat
Before this patch only clocks that perfectly match were used and if none existed this was not handled properly. This patch changes this to always use the closest clock supported. This should behave like before for clocks that have a perfect match but be much saner for clocks which are slightly off. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-03-12viafb: remove duplicated clock informationFlorian Tobias Schandinat
This patch removes the direct lookup table for resolution+refresh and pixclock by calculating this information from the mode table. Removes a lot of dupllication and error potential by just doing a little more calculations on each mode change. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-03-10Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/bnx2x/bnx2x_cmn.c
2011-03-10fbdev: sh_mobile_lcdcfb: add backlight supportAlexandre Courbot
Support for backlight devices controlled through board-specific routines. Backlights can be defined per-channel and follow fbdev directives to switch off as the LCD blanks or is turned on/off. Signed-off-by: Alexandre Courbot <gnurou@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-03-09viafb: factor lcd scaling parameters outFlorian Tobias Schandinat
These parameters are the same for all currently known VIA IGPs so it does not make any sense to store them with IGP specific data. This saves a few bytes and helps a bit in dicovering the real differences. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-03-09viafb: strip some structuresFlorian Tobias Schandinat
This patch removes some write-only variables from the device management structures. Just a small cleanup. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-03-09viafb: remove unused data_mode and device_typeFlorian Tobias Schandinat
This patch is a little cleanup for the chip_info structures. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-03-09viafb: kill lcd_panel_idFlorian Tobias Schandinat
This patch removes all internal uses of another mostly artificial value. It does duplicate the information of the maximum resolution and it is not flexible as only a few resolutions exist. Hence it is better to remove it and clean the mess up. No runtime change expected. Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-03-09video via: make local variables staticStephen Hemminger
Many local variables should be declared static. Found by sparse, compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-03-09video via: fix iomem accessStephen Hemminger
This driver is not respecting the iomem memory space restrictions and does direct access. This works on x86 but is non-portable and should not be done. Converted memcpy() of 2 to readw. Last post increment of romptr was unnecessary since pointer never used after that. Found by sparse, compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-03-08msm: mdp: Set the correct pack pattern for XRGB/ARGBDima Zavin
Signed-off-by: Dima Zavin <dima@android.com> Signed-off-by: Carl Vanderlip <carlv@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-03-08msm_fb: Fix framebuffer consoleArve Hjønnevåg
Don't allow non panning updates to bypass the wait for the panel to turn on. Signed-off-by: Carl Vanderlip <carlv@codeaurora.org> Signed-off-by: Arve Hjønnevåg <arve@android.com> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-03-07video: Add i.MX23/28 framebuffer driverSascha Hauer
changes since v2: - use v3 and v4 for specifying the ip version instead of i.MX23/28. This is a better namespace when future versions are added. - rename mach/fb.h to mach/mxsfb.h changes since v1: - Add a LCDC_ prefix to the register names. - use set/clear registers where appropriate - protect call to mxsfb_disable_controller() in mxsfb_remove() with a (host->enabled) as suggested by Lothar Wassmann Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Acked-by: Shawn Guo <shawn.guo@freescale.com> Cc: Paul Mundt <lethal@linux-sh.org> Cc: linux-fbdev@vger.kernel.org
2011-03-05drivers/video/backlight/ltv350qv.c: fix a memory leakAxel Lin
Signed-off-by: Axel Lin <axel.lin@gmail.com> Cc: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Richard Purdie <rpurdie@rpsys.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-03-03netlink: kill eff_cap from struct netlink_skb_parmsPatrick McHardy
Netlink message processing in the kernel is synchronous these days, capabilities can be checked directly in security_netlink_recv() from the current process. Signed-off-by: Patrick McHardy <kaber@trash.net> Reviewed-by: James Morris <jmorris@namei.org> [chrisw: update to include pohmelfs and uvesafb] Signed-off-by: Chris Wright <chrisw@sous-sol.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-03-02msm: mdp: Add support for RGBX 8888 image format.Dima Zavin
Signed-off-by: Dima Zavin <dima@android.com> Signed-off-by: Carl Vanderlip <carlv@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-03-02video: msmfb: Put the partial update magic value into the fix_screen struct.Dima Zavin
This can then be tested by userspace to see if the capability is supported. Userspace cannot rely on that value being left in var_screen, since userspace itself can change it. Signed-off-by: Dima Zavin <dima@android.com> Signed-off-by: Carl Vanderlip <carlv@codeaurora.org> Signed-off-by: David Brown <davidb@codeaurora.org>
2011-03-02video/via: drop deprecated (and unused) i2c_adapter.idPeter Huewe
This patch removes an assignment to the deprecated i2c_adapter.id field. Since the field isn't used anywhere else in the driver it is save to remove it. Signed-off-by: Peter Huewe <peterhuewe@gmx.de> Acked-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Florian Tobias Schandinat <FlorianSchandinat@gmx.de>
2011-02-28dt/video: Eliminate users of of_platform_{,un}register_driverGrant Likely
Get rid of users of of_platform_driver in drivers/video. The of_platform_{,un}register_driver functions are going away, so the users need to be converted to using the platform_bus_type directly. Signed-off-by: Grant Likely <grant.likely@secretlab.ca>
2011-02-23ARM: amba: make probe() functions take const id tablesRussell King
Make Primecell driver probe functions take a const pointer to their ID tables. Drivers should never modify their ID tables in their probe handler. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-11VIDEO: cyberpro: remove unused cyber2000fb_get_fb_var()Russell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-11VIDEO: cyberpro: remove useless function extreg pointersRussell King
Sub-drivers can call these functions directly, there's no need for this kind of indirection. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-11VIDEO: cyberpro: update handling of device structuresRussell King
Provide the framebuffer device with its correct parent (the PCI device for PCI connected cards.) Also, use this struct device to pass to sub-drivers rather than the pci_dev structure, which is really what they want. Also propagate the assigned IRQ, which they were getting direct from the PCI device structure. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-11VIDEO: cyberpro: add support for video capture I2CRussell King
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-11VIDEO: cyberpro: make 'reg_b0_lock' always presentRussell King
Rather than conditionally compiling out reg_b0_lock, always keep it available, and always take it when changing the PLL rates. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-02-11VIDEO: cyberpro: add I2C supportOndrej Zary
Add I2C support for the DDC bus to cyber2000fb driver. This is only bus support, driver does not use EDID. Tested on two different CyberPro 2000 cards with i2cdetect and decode-edid. Signed-off-by: Ondrej Zary <linux@rainbow-software.org> [removed i2c-id.h include - rmk] Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-28VIDEO: cyberpro: select lowest multipler/divisor for PLLRussell King
The lowest closest multiplier/divisor combination should be used for the PLL, not the largest. Reverse the search order. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2011-01-26console: rename acquire/release_console_sem() to console_lock/unlock()Torben Hohn
The -rt patches change the console_semaphore to console_mutex. As a result, a quite large chunk of the patches changes all acquire/release_console_sem() to acquire/release_console_mutex() This commit makes things use more neutral function names which dont make implications about the underlying lock. The only real change is the return value of console_trylock which is inverted from try_acquire_console_sem() This patch also paves the way to switching console_sem from a semaphore to a mutex. [akpm@linux-foundation.org: coding-style fixes] [akpm@linux-foundation.org: make console_trylock return 1 on success, per Geert] Signed-off-by: Torben Hohn <torbenh@gmx.de> Cc: Thomas Gleixner <tglx@tglx.de> Cc: Greg KH <gregkh@suse.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2011-01-25video/msm_fb: use system_wq instead of dedicated workqueuesTejun Heo
With cmwq, there's no reason to use separate workqueues. Drop msmfb_info->resume_workqueue and use system_wq instead. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: Stanislaw Gruszka <stf_xl@wp.pl> Cc: linux-usb@vger.kernel.org Signed-off-by: David Brown <davidb@codeaurora.org>
2011-01-25Merge branch 'fbdev-fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6 * 'fbdev-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/lethal/fbdev-2.6: mailmap: Add an entry for Axel Lin. video: fix some comments in drivers/video/console/vgacon.c drivers/video/bf537-lq035.c: Add missing IS_ERR test video: pxa168fb: remove a redundant pxa168fb_check_var call video: da8xx-fb: fix fb_probe error path video: pxa3xx-gcu: Return -EFAULT when copy_from_user() fails video: nuc900fb: properly free resources in nuc900fb_remove video: nuc900fb: fix compile error
2011-01-25video: fix some comments in drivers/video/console/vgacon.cAmerigo Wang
Now vgacon_scrollback_startup() uses slab, not bootmem, the comment above it is obsolete, so does __init_refok. Signed-off-by: WANG Cong <amwang@redhat.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-25drivers/video/bf537-lq035.c: Add missing IS_ERR testJulia Lawall
lcd_device_register may return ERR_PTR, so a check is added for this value before the dereference. All of the other changes reorganize the error handling code in this function to avoid duplicating all of it in the added case. In the original code, in one case, the global variable fb_buffer was set to NULL in error code that appears after this variable is initialized. This is done now in all error handling code that has this property. The semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @r@ identifier f; @@ f(...) { ... return ERR_PTR(...); } @@ identifier r.f, fld; expression x; statement S1,S2; @@ x = f(...) ... when != IS_ERR(x) ( if (IS_ERR(x) ||...) S1 else S2 | *x->fld ) // </smpl> Signed-off-by: Julia Lawall <julia@diku.dk> Acked-by: Mike Frysinger <vapier@gentoo.org> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-25video: pxa168fb: remove a redundant pxa168fb_check_var callaxel lin
Current implementation calls pxa168fb_check_var twice in pxa168fb_probe. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2011-01-25video: da8xx-fb: fix fb_probe error pathaxel lin
Current implementation puts CONFIG_CPU_FREQ at wrong place, CONFIG_CPU_FREQ is for lcd_da8xx_cpufreq_deregister not for unregister_framebuffer. Signed-off-by: Axel Lin <axel.lin@gmail.com> Signed-off-by: Paul Mundt <lethal@linux-sh.org>
generated by cgit v0.10.2 at 2024-10-26 02:38:23 (GMT)