summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-04-23b43: N-PHY: define missing registersRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: use defines for board_typeRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: N-PHY: fix "NB" RSSI calibration on PHYs rev2-Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: N-PHY: use enum for RSSI type everywhere we use itRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: N-PHY: rename RSSI types to be shorter and more accurateRafał Miłecki
Thanks to Broadcom releasing some code we can use better names. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: N-PHY: use more friendly variables names in RSSI codeRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: N-PHY: simplify conditions in RSSI offset scale functionRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: N-PHY: use enum for RAIL typeRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: HT-PHY: use enum for RSSI typesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: HT-PHY: store TX power state before disabling itRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: HT-PHY: define regs for power estimationRafał Miłecki
In MMIO dumps of ndiswrapper there are following PHY ops: phy_read(0x0118) -> 0x013d phy_read(0x01ed) -> 0x993d phy_read(0x0119) -> 0x012f phy_read(0x01ee) -> 0x992f phy_read(0x011a) -> 0x0139 phy_read(0x0969) -> 0x9939 It matches the code of wlc_phy_txpower_est_power_nphy (from brcm80211), so we know the registers meaning. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: HT-PHY: do some extra TSSI setup after configuring TXRafał Miłecki
After b43_phy_ht_tx_power_ctl_setup there are some extra radio ops: radio_read(0x08bf) -> 0x0001 radio_write(0x08bf) <- 0x0001 radio_write(0x0159) <- 0x0011 On N-PHY we write 0x11 to TSSI regs, so it's probably sth similar. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: HT-PHY: finish calculating values for idle TSSIRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: HT-PHY: tables: don't duplicate core-generic regsRafał Miłecki
Now when we know many radio regs at 0x000 are core-generic, I've noticed we duplicate some values in the tables. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-23b43: HT-PHY: rename defines addressing cores on the 2059 radioRafał Miłecki
After comparing writes to registers at 0x000, 0x400 and 0x800 it seems there are many very similar writes. So 0x000 offset is not for accessing something totally different, but probably just the first out of three cores. Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2013-04-22mwifiex: remove redundant initialization for bss_descriptorBing Zhao
Initialization of bss_descriptor is unnecessary as the entire structure will be overwritten by a memcpy followed by. Initialize disable_11ac flag properly by setting it to true in mwifiex_fill_new_bss_desc(). Reported-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Paul Stewart <pstew@chromium.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22mwifiex: fix use-after-free in beacon_ie processingBing Zhao
beacon_ie buffer is allocated in mwifiex_fill_new_bss_desc() and the buffer pointer is saved in bss_desc->beacon_buf. beacon_ie is freed before the function returns. However, bss_desc->beacon_buf is still being accessed afterwards. Fix it by freeing beacon_ie (bss_desc->beacon_buf) in caller's scope. Reviewed-by: Doug Anderson <dianders@chromium.org> Reviewed-by: Paul Stewart <pstew@chromium.org> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22mwifiex: don't try to associate when bss_mode is not STABing Zhao
We have blocked association attempts on interfaces configured in AP and AD-HOC modes. P2P mode should be blocked too. Furthermore, an error code must be returned if we are unable to associate. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22mwifiex: make use of msecs_to_jiffies()Bing Zhao
Use msecs_to_jiffies() wherever possible. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22mwifiex: correct bss_mode check while appending vht operation IEBing Zhao
priv->bss_mode uses NL80211_IFTYPE_* definitions. HostCmd_BSS_MODE_IBSS is used in ad-hoc start/join command between driver and firmware. Coincidentally both HostCmd_BSS_MODE_IBSS and NL80211_IFTYPE_STATION are defined as 2. That explains why nobody complained. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22mwifiex: use PCI_DMA_FROMDEVICE for RX queue de-initAvinash Patil
There is a typo in mwifiex_cleanup_rxq_ring() which uses PCI_DMA_TODEVICE while unmapping PCI memory. We should actually use PCI_DMA_FROMDEVICE. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22mwifiex: configure p2p interface during initializationBing Zhao
Send P2P_MODE_CFG cmd to firmware when p2p interface is created. Without proper p2p configuration firmware may behave incorrectly while handling commands sent through this interface. Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Stone Piao <piaoyun@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22mwifiex: Start P2P devices in P2P modePaul Stewart
p2p devices should identify themselves as such to userspace at startup, so the connection manager can decide which interface to start wpa_supplicant instances on. Signed-off-by: Paul Stewart <pstew@chromium.org> Reviewed-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22rt2x00: Use more current logging styles, shrink object sizeJoe Perches
Reduce object space ~2% using more current logging styles. Neaten and simplify logging macros. Use wiphy_<level> where appropriate. Coalesce formats. Convert ERROR/WARNING/INFO macros to rt2x00_<level> Convert EEPROM to rt2x00_eeprom_dbg Convert PROBE_ERROR to rt2x00_probe_err Convert DEBUG to rt2x00_dbg Convert EEPROM to rt2x00_eeprom_dbg $ size drivers/net/wireless/rt2x00/built-in.o* text data bss dec hex filename 245639 71696 69584 386919 5e767 drivers/net/wireless/rt2x00/built-in.o.new 240609 70096 68944 379649 5cb01 drivers/net/wireless/rt2x00/built-in.o.new.nodyndbg 240609 70096 68944 379649 5cb01 drivers/net/wireless/rt2x00/built-in.o.new.no_rt2x00_debug 249198 70096 70352 389646 5f20e drivers/net/wireless/rt2x00/built-in.o.old 249198 70096 70352 389646 5f20e drivers/net/wireless/rt2x00/built-in.o.old.nodyndbg 244222 70096 69712 384030 5dc1e drivers/net/wireless/rt2x00/built-in.o.old.no_rt2x00_debug Signed-off-by: Joe Perches <joe@perches.com> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22rt2x00: rt2800lib: rename rt2800_init_bbb_early to rt2800_init_bbp_earlyGabor Juhos
The function is used for BBP register initialization, fix the typo in the function name to reflect that. The patch contains no functional changes. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22brcmfmac: fix potential NULL pointer dereference in ↵Wei Yongjun
brcmf_fws_flow_control_check() The dereference to 'ifp' in debug code should be moved below the NULL test. Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Acked-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22wil6210: more Rx descriptor accessor functionsVladimir Kondratiev
Helpers to fetch various fields from the Rx descriptor Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22wil6210: Use cached copy of Tx descriptorVladimir Kondratiev
Original Tx descriptor stored is in non-cached area for DMA; copy it to the cached memory to speed-up access Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22wil6210: Tx init optimizationVladimir Kondratiev
vring size is known from the beginning, fill it immediately in the struct initializer This is minor optimization that reduces code size. Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22wil6210: Use cached copy of Rx descriptorVladimir Kondratiev
Rx descriptors stored in non-cacheable memory area for DMA. Non-cacheable memory causes long access time from CPU. Copy rx descriptor to the skb->cb, and use this copy. It provides faster memory access, and will be usefull to keep Rx information for later processing (BACK reorder) Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22brcmfmac: stop dequeue upon sk_buff commit failureArend van Spriel
In the dequeue worker the function brcmf_commit_skb() is called. However, instead of increment the credit count upon success it should break the for loop upon failure. Otherwise, it will result in an endless loop. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22brcmfmac: change return type for brcmf_rollback_toq() to voidArend van Spriel
The function brcmf_rollback_toq() is already called in error path and its result should not override the initial error value. As the function releases the sk_buff there is no need to return anything so change return type to void. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22brcmfmac: finalize transmit upon any rollback failureArend van Spriel
All rollback failures should result in freeing of the sk_buff by calling brcmf_txfinalize(). Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22brcmfmac: use lock in brcmf_fws_del_interface()Arend van Spriel
When deleting an interface in firmware-signalling module it will clear any destination descriptors. To avoid concurrency issues it should take the lock using brcmf_fws_lock(). Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22brcmfmac: schedule dequeue upon firmware-signal receptionArend van Spriel
Several firmware signals should be considered as opportunity to send packets to the firmware. This patch adds conditional scheduling of the dequeue worker thread while handling those signals. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22brcmfmac: destination mac closed when interface is closedArend van Spriel
Firmware signals a destination is closed as well as an interface. A destination is associated with an interface. When an interface is closed consequently the destination should be considered closed as well. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22brcmutil: simplify brcmu_pkt_free_skb()Arend van Spriel
The function brcmu_pkt_free_skb() use skb->destructor to decide how the sk_buff should be freed. However, when running AP mode with iptables configured this results in a kernel warning. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22brcmfmac: remove error message upon allocation failureArend van Spriel
In function brcmf_add_if() an error message is printed upon alloc_netdev() failure. The allocation failure itself spews enough info in the log so remove the error message. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22brcmfmac: check memory allocation in brcmf_add_if()Arend van Spriel
For P2P_DEVICE interface the struct brcmf_if instance is allocated using kzalloc() which can fail. Add pointer check and return -ENOMEM if it failed. Fixes the following smatch error: "drivers/net/wireless/brcm80211/brcmfmac/dhd_linux.c:770 brcmf_add_if() error: potential null dereference 'ifp'. (kzalloc returns null)" Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Reported-by: Fengguang Wu <fengguang.wu@intel.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Piotr Haber <phaber@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22brcmfmac: reinitialize dequeue mask per nodeArend van Spriel
The mask was only initialized for the first node, but it should be done for each node that is handled in the loop. Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22rt2800: nulify all last words of TXWIStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22rt2x00: provide separate information about TXWI & RXWI sizesStanislaw Gruszka
On new 2800 hardware sizes of TXWI & RXIW can be different than TXD & RXD sizes, so we need to difference between them. Let's define winfo_size as size of in buffer descriptor (TXWI & RXWI), and desc_size of as size of additional descriptor - in separate DMA coherent buffer for PCI hardware (TXD & RXD) and yet another in buffer descriptor for USB hardware (TXINFO & RXINFO). Change is rt2x00 wild, but should affect only 2800 driver. Patch also fix beaconing for 5592usb AP mode. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22rt2800: cleanup rt2800_init_rfcsrStanislaw Gruszka
This procedure is simple switch now and return no error any longer. Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22rt2800: add rt2800_normal_mode_setup_3xxx subroutineStanislaw Gruszka
Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22rt2800: add rt2800_led_open_drain_enable subroutineStanislaw Gruszka
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22rt2800: move RF_R27 setup to individual rfcsr init subroutinesStanislaw Gruszka
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22rt2800: add rt2800_rx_filter_calibration procedureStanislaw Gruszka
Add procedure for both bands filter calibration and use it on individual chipset init rfcsr subroutines. Remove "Set back to initial state" code for 3290 since vendor driver DPO_RT3290_LinuxSTA_V2600_20120508 does not include it. Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22rt2800: move RFCSR6_R2 & LDO_CFG0 setup to 3572 specific rfcsr initStanislaw Gruszka
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22rt2800: move GPIO_SWITCH setup to 3390 specific rfcsr initStanislaw Gruszka
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2013-04-22rt2800: move 30xx common rf init codeStanislaw Gruszka
Acked-by: Gertjan van Wingerde <gwingerde@gmail.com> Signed-off-by: Stanislaw Gruszka <stf_xl@wp.pl> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v0.10.2 at 2024-11-06 19:30:37 (GMT)