summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-06-28OMAPDSS: remove enum omap_dss_overlay_managersTomi Valkeinen
We have two almost the same enums: omap_channel and omap_dss_overlay_managers. omap_channel is used almost everywhere, and omap_channel assigns explicit values to the enum values which are needed for proper operation. omap_dss_overlay_managers is only used in one place, so it's easy to remove it, which is what this patch does. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-06-13Merge tag 'v3.5-rc2'Tomi Valkeinen
Merge v3.5-rc2 to get latest device tree and dynamic debug changes.
2012-06-08Revert "drm/i915/crt: Do not rely upon the HPD presence pin"Linus Torvalds
This reverts commit 9e612a008fa7fe493a473454def56aa321479495. It incorrectly finds VGA connectors where none are attached, apparently not noticing that nothing replied to the EDID queries, and happily using the default EDID modes that have nothing to do with actual hardware. That in turn then causes X to fall down to the lowest common denominator, which is usually the default 1024x768 mode that is in the default EDID and pretty much anything supports). I'd suggest that if not relying on the HDP pin, the code should at least check whether it gets valid EDID data back, rather than just assume there's something on the VGA connector. Cc: Dave Airlie <airlied@linux.ie> Cc: Chris Wilson <chris@chris-wilson.co.uk> Cc: Daniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-08Merge tag 'upstream-3.5-rc2' of git://git.infradead.org/linux-ubifsLinus Torvalds
Pull UBI/UBIFS fixes from Artem Bityutskiy: "Fix UBI and UBIFS - they refuse to work without debugfs. This was broken by the 3.5-rc1 UBI/UBIFS changes when we removed the debugging Kconfig switches. Also, correct locking in 'ubi_wl_flush()' - it was extended to support flushing a specific LEB in 3.5-rc1, and the locking was sub-optimal." * tag 'upstream-3.5-rc2' of git://git.infradead.org/linux-ubifs: UBI: correct ubi_wl_flush locking UBIFS: fix debugfs-less systems support UBI: fix debugfs-less systems support
2012-06-08Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm intel and exynos fixes from Dave Airlie: "A bunch of fixes for Intel and exynos, nothing too major, a new intel PCI ID, and a fix for CRT detection." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: drm/i915: pch_irq_handler -> {ibx, cpt}_irq_handler char/agp: add another Ironlake host bridge drm/i915: fix up ivb plane 3 pageflips drm/exynos: fixed blending for hdmi graphic layer drm/exynos: Remove dummy encoder get_crtc operation implementation drm/exynos: Keep a reference to frame buffer GEM objects drm/exynos: Don't cast GEM object to Exynos GEM object when not needed drm/exynos: DRIVER_BUS_PLATFORM is not a driver feature drm/exynos: fixed size type. drm/exynos: Use DRM_FORMAT_{NV12, YUV420} instead of DRM_FORMAT_{NV12M, YUV420M} drm/i915: hold forcewake around ring hw init drm/i915: Mark the ringbuffers as being in the GTT domain drm/i915/crt: Do not rely upon the HPD presence pin drm/i915: Reset last_retired_head when resetting ring
2012-06-08Merge branch 'exynos-drm-fixes' of ↵Dave Airlie
git://git.infradead.org/users/kmpark/linux-samsung into drm-fixes * 'exynos-drm-fixes' of git://git.infradead.org/users/kmpark/linux-samsung: drm/exynos: fixed blending for hdmi graphic layer drm/exynos: Remove dummy encoder get_crtc operation implementation drm/exynos: Keep a reference to frame buffer GEM objects drm/exynos: Don't cast GEM object to Exynos GEM object when not needed drm/exynos: DRIVER_BUS_PLATFORM is not a driver feature drm/exynos: fixed size type. drm/exynos: Use DRM_FORMAT_{NV12, YUV420} instead of DRM_FORMAT_{NV12M, YUV420M}
2012-06-08Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: pch_irq_handler -> {ibx, cpt}_irq_handler char/agp: add another Ironlake host bridge drm/i915: fix up ivb plane 3 pageflips drm/i915: hold forcewake around ring hw init drm/i915: Mark the ringbuffers as being in the GTT domain drm/i915/crt: Do not rely upon the HPD presence pin drm/i915: Reset last_retired_head when resetting ring
2012-06-07drivers/platform/x86/acerhdf.c: correct Boris' mail addressBorislav Petkov
Correct mail address reference to a mail account which I actually read. Signed-off-by: Borislav Petkov <bp@alien8.de> Cc: Peter Feuerer <peter@piie.net> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-06-07UBI: correct ubi_wl_flush lockingArtem Bityutskiy
Commit "62f38455 UBI: modify ubi_wl_flush function to clear work queue for a lnum" takes the 'work_sem' semaphore in write mode for the entire loop, which is not very good because it will block other workers for potentially long time. We do not need to have it in write mode - read mode is enough, and we do not need to hole it over the entire loop. So this patch turns changes the locking: takes 'work_sem' in read mode and pushes it down to the loop. Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>
2012-06-07UBI: fix debugfs-less systems supportArtem Bityutskiy
Commit "aa44d1d UBI: remove Kconfig debugging option" broke UBI and it refuses to initialize if debugfs (CONFIG_DEBUG_FS) is disabled. I incorrectly assumed that debugfs files creation function will return success if debugfs is disabled, but they actually return -ENODEV. This patch fixes the issue. Reported-by: Paul Parsons <lost.distance@yahoo.com> Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com> Tested-by: Paul Parsons <lost.distance@yahoo.com>
2012-06-06drm/i915: pch_irq_handler -> {ibx, cpt}_irq_handlerAdam Jackson
Cougar/Panther Point redefine the bits in SDEIIR pretty completely. This function is just debugging, but if we're debugging we probably want to be told accurate things instead of lies. I'm told Lynx Point changes this yet more, but I have no idea how... Note from Eugeni's review: "For the record and for future enabling efforts, for LPT, bits 28-31 and 1-14 are gone since CPT/PPT (e.g., those must be zero). And there is the bit 15 as a new addition, but we are not using it yet and probably won't be using in foreseeable future." Signed-off-by: Adam Jackson <ajax@redhat.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=35103 Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-06Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull ACPI and Power Management changes from Len Brown. This does an evil merge to fix up what I think is a mismerge by Len to the gma500 driver, and restore it to the mainline state. In that driver, both branches had commented out the call to acpi_video_register(), and Len resolved the merge to that commented-out version. However, in mainline, further changes by Alan (commit d839ede47a56: "gma500: opregion and ACPI" to be exact) had re-enabled the ACPI video registration, so the current state of the driver seems to want it. Alan is apparently still feeling the effects of partying with the Queen, so he didn't reply to my query, but I'll do the evil merge anyway. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: ACPI: fix acpi_bus.h build warnings when ACPI is not enabled drivers: acpi: Fix dependency for ACPI_HOTPLUG_CPU tools/power turbostat: fix IVB support tools/power turbostat: fix un-intended affinity of forked program ACPI video: use after input_unregister_device() gma500: don't register the ACPI video bus acpi_video: Intel video is not always i915 acpi_video: fix leaking PCI references ACPI: Ignore invalid _PSS entries, but use valid ones ACPI battery: only refresh the sysfs files when pertinent information changes
2012-06-06Merge tag 'rdma-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull InfiniBand/RDMA fixes from Roland Dreier: "All in hardware drivers: - Fix crash in cxgb4 - Fixes to new ocrdma driver - Regression fixes for mlx4" * tag 'rdma-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/mlx4: Fix max_wqe capacity reported from query device mlx4_core: Fix setting VL_cap in mlx4_SET_PORT wrapper flow IB/mlx4: Fix EQ deallocation in legacy mode RDMA/cxgb4: Fix crash when peer address is 0.0.0.0 RDMA/ocrdma: Remove unnecessary version.h includes RDMA/ocrdma: Fix signaled event for SRQ_LIMIT_REACHED RDMA/ocrdma: Correct queue free count math
2012-06-06Merge branches 'cxgb4', 'mlx4' and 'ocrdma' into for-linusRoland Dreier
2012-06-06IB/mlx4: Fix max_wqe capacity reported from query deviceSagi Grimberg
1. Limit the max number of WQEs per QP reported when querying the device, so that ib_create_qp() will not fail for a QP size that the device claimed to support due to additional headroom WQEs being allocated. 2. Limit qp resources accepted for ib_create_qp() to the limits reported in ib_query_device(). In kernel space, make sure that the limits returned to the caller following qp creation also lie within the reported device limits. For userspace, report as before, and do adjustment in libmlx4 (so as not to break ABI). Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Sagi Grimberg <sagig@mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-06mlx4_core: Fix setting VL_cap in mlx4_SET_PORT wrapper flowJack Morgenstein
Commit 096335b3f983 ("mlx4_core: Allow dynamic MTU configuration for IB ports") modifies the port VL setting. This exposes a bug in mlx4_common_set_port(), where the VL cap value passed in (inside the command mailbox) is incorrectly zeroed-out: mlx4_SET_PORT modifies the VL_cap field (byte 3 of the mailbox). Since the SET_PORT command is paravirtualized on the master as well as on the slaves, mlx4_SET_PORT_wrapper() is invoked on the master. This calls mlx4_common_set_port() where mailbox byte 3 gets overwritten by code which should only set a single bit in that byte (for the reset qkey counter flag) -- but instead overwrites the entire byte. The result is that when running in SR-IOV mode, the VL_cap will be set to zero -- fix this. Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-06Merge tag 'md-3.5-fixes' of git://neil.brown.name/mdLinus Torvalds
Pull two md fixes from NeilBrown: "One sparse-warning fix, one bugfix for 3.4-stable" * tag 'md-3.5-fixes' of git://neil.brown.name/md: md: raid1/raid10: fix problem with merge_bvec_fn lib/raid6: fix sparse warnings in recovery functions
2012-06-06Merge tag 'iommu-fixes-3.5-rc1' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu Pull IOMMU fixes from Joerg Roedel: "Two patches are in here which fix AMD IOMMU specific issues. One patch fixes a long-standing warning on resume because the amd_iommu_resume function enabled interrupts. The other patch fixes a deadlock in an error-path of the page-fault request handling code of the IOMMU driver. * tag 'iommu-fixes-3.5-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu/amd: Fix deadlock in ppr-handling error path iommu/amd: Cache pdev pointer to root-bridge
2012-06-06char/agp: add another Ironlake host bridgeEugeni Dodonov
This seems to come on Gigabyte H55M-S2V and was discovered through the https://bugs.freedesktop.org/show_bug.cgi?id=50381 debugging. Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50381 Signed-off-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-05drm/i915: fix up ivb plane 3 pageflipsDaniel Vetter
Or at least plug another gapping hole. Apparrently hw desingers only moved the bit field, but did not bother ot re-enumerate the planes when adding support for a 3rd pipe. Discovered by i-g-t/flip_test. This may or may not fix the reference bugzilla, because that one smells like we have still larger fish to fry. v2: Fixup the impossible case to catch programming errors, noticed by Chris Wilson. References: https://bugs.freedesktop.org/show_bug.cgi?id=50069 Acked-by: Chris Wilson <chris@chris-wilson.co.uk> Tested-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Eugeni Dodonov <eugeni.dodonov@intel.com> Cc: stable@vger.kernel.org Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-05Merge branch '3.5-merge-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull two scsi target fixes from Nicholas Bellinger: "The first is a small name-space collision fix from Stefan for the new sbp-target / ieee-1394 code, and second is the FILEIO backend conversion patch to always use O_DSYNC by default instead of O_SYNC as recommended by hch. Note the latter is CC'ed stable." * '3.5-merge-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: target/file: Use O_DSYNC by default for FILEIO backends sbp-target: rename a variable to avoid name clash
2012-06-05Merge branch 'i2c-embedded/for-current' of ↵Linus Torvalds
git://git.pengutronix.de/git/wsa/linux Pull embedded i2c update from Wolfram Sang: "This only contains one new driver which had multiple dependencies (pinctrl, i2c-mux-rework, new devm_* functions), so I decided to wait for rc1. Plus, it had to wait a little for the ack of a devicetree maintainer since the bindings were not trivial enough for me to pass through. So, given that, I hope there is still something like the "new driver rule", so we could have the driver in 3.5 and people can start using it. That would make merging support for some boards easier for 3.6 since the dependency on this driver is gone then." * 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux: i2c: Add generic I2C multiplexer using pinctrl API
2012-06-05drm/radeon/kms: add new Trinity PCI idsAlex Deucher
Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-05drm/radeon: fix vm deadlocks on caymanChristian König
Locking mutex in different orders just screams for deadlocks, and some testing showed that it is actually quite easy to trigger them. Signed-off-by: Christian König <deathsimple@vodafone.de> Reviewed-by: Jerome Glisse <jglisse@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-05drm/radeon: fix gpu_init on siAlex Deucher
- Properly set up the RBs - Properly set up the SPI - Properly set up gb_addr_config This should fix rendering issues on certain cards. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-05drm/radeon/hdmi: don't set SEND_MAX_PACKETS bitRafał Miłecki
Many TVs and A/V receivers don't work with this bit set. Problem was confirmed using: Onkyo TX-SR605, Sony BRAVIA KDL-52X3500, Sony BRAVIA KDL-40S40xx. In theory this bit shouldn't affect audio engine when feeding it with data, however it seems it does. Driver fglrx doesn't set that bit in any of the above cases. This fixes a regression introduced by 3.5-rc1. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-05drm/radeon/audio: don't hardcode CRTC idRafał Miłecki
This is based on info released by AMD, should allow using audio in much more cases. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Reviewed-by: Alex Deucher <alexander.deucher@amd.com> Cc: <stable@vger.kernel.org> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-05drm/radeon: make audio_init consistent across asicsAlex Deucher
Call it in the asic startup callback on all asics. Previously r600 and rv770 called it in the startup and resume callbacks while all the other asics called it in the startup callback. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-06-05drm/exynos: fixed blending for hdmi graphic layerSeung-Woo Kim
Blending for graphic layer 0 of hdmi mixer was not set so video layer cannot be showed if graphic layer 0 is enabled. This patch fixes blending values to support blending between graphic layer 0 and video layer. Signed-off-by: Seung-Woo Kim <sw0312.kim@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> Signed-off-by: Inki Dae <inki.dae@samsung.com>
2012-06-05drm/exynos: Remove dummy encoder get_crtc operation implementationLaurent Pinchart
The encoder get_crtc operation is called to retrieve a pointer to the CRTC the encoder is currenctly connected to, right after setting the encoder::crtc field to the new CRTC. The implementation of this operation returns the pointer to the new CRTC, which is then pointlessly compared to itself. As the operation is not mandatory, don't implement it. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-06-05drm/exynos: Keep a reference to frame buffer GEM objectsLaurent Pinchart
GEM objects used by frame buffers must be referenced for the whole life of the frame buffer. Release the references in the frame buffer destructor instead of its constructor. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-06-05drm/exynos: Don't cast GEM object to Exynos GEM object when not neededLaurent Pinchart
The exynos_drm_gem_dumb_map_offset() doesn't need to access any Exynos-specific GEM object fields, don't cast the GEM object. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-06-05drm/exynos: DRIVER_BUS_PLATFORM is not a driver featureLaurent Pinchart
DRIVER_BUS_PLATFORM is a bus type used internally in the DRM core, not a flag for the drm_driver::driver_features field. Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-06-05drm/exynos: Use DRM_FORMAT_{NV12, YUV420} instead of DRM_FORMAT_{NV12M, YUV420M}Ville Syrjälä
The NV12M/YUV420M formats are identical to the already existing standard NV12/YUV420 formats. The M variants will be removed, so convert the driver to use the standard names. Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Inki Dae <inki.dae@samsung.com> Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
2012-06-04Merge tag 'stable/frontswap.v16-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/mm Pull frontswap feature from Konrad Rzeszutek Wilk: "Frontswap provides a "transcendent memory" interface for swap pages. In some environments, dramatic performance savings may be obtained because swapped pages are saved in RAM (or a RAM-like device) instead of a swap disk. This tag provides the basic infrastructure along with some changes to the existing backends." Fix up trivial conflict in mm/Makefile due to removal of swap token code changing a line next to the new frontswap entry. This pull request came in before the merge window even opened, it got delayed to after the merge window by me just wanting to make sure it had actual users. Apparently IBM is using this on their embedded side, and Jan Beulich says that it's already made available for SLES and OpenSUSE users. Also acked by Rik van Riel, and Konrad points to other people liking it too. So in it goes. By Dan Magenheimer (4) and Konrad Rzeszutek Wilk (2) via Konrad Rzeszutek Wilk * tag 'stable/frontswap.v16-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/mm: frontswap: s/put_page/store/g s/get_page/load MAINTAINER: Add myself for the frontswap API mm: frontswap: config and doc files mm: frontswap: core frontswap functionality mm: frontswap: core swap subsystem hooks and headers mm: frontswap: add frontswap header file
2012-06-04Merge branch 'timers-urgent-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull timer updates from Thomas Gleixner: "The clocksource driver is pure hardware enablement and the skew option is default off, well tested and non dangerous." * 'timers-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: tick: Move skew_tick option into the HIGH_RES_TIMER section clocksource: em_sti: Add DT support clocksource: em_sti: Emma Mobile STI driver clockevents: Make clockevents_config() a global symbol tick: Add tick skew boot option
2012-06-04drm/i915: hold forcewake around ring hw initDaniel Vetter
Empirical evidence suggests that we need to: On at least one ivb machine when running the hangman i-g-t test, the rings don't properly initialize properly - the RING_START registers seems to be stuck at all zeros. Holding forcewake around this register init sequences makes chip reset reliable again. Note that this is not the first such issue: commit f01db988ef6f6c70a6cc36ee71e4a98a68901229 Author: Sean Paul <seanpaul@chromium.org> Date: Fri Mar 16 12:43:22 2012 -0400 drm/i915: Add wait_for in init_ring_common added delay loops to make RING_START and RING_CTL initialization reliable on the blt ring at boot-up. So I guess it won't hurt if we do this unconditionally for all force_wake needing gpus. To avoid copy&pasting of the HAS_FORCE_WAKE check I've added a new intel_info bit for that. v2: Fixup missing commas in static struct and properly handling the error case in init_ring_common, both noticed by Jani Nikula. Cc: stable@vger.kernel.org Reported-and-tested-by: Yang Guang <guang.a.yang@intel.com> Reviewed-by: Eugeni Dodonov <eugeni.dodonov@intel.com> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=50522 Signed-Off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-04drm/i915: Mark the ringbuffers as being in the GTT domainChris Wilson
By correctly describing the rinbuffers as being in the GTT domain, it appears that we are more careful with the management of the CPU cache upon resume and so prevent some coherency issue when submitting commands to the GPU later. A secondary effect is that the debug logs are then consistent with the actual usage (i.e. they no longer describe the ringbuffers as being in the CPU write domain when we are accessing them through an wc iomapping.) Reported-and-tested-by: Daniel Gnoutcheff <daniel@gnoutcheff.name> Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=41092 Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk> Cc: stable@vger.kernel.org Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
2012-06-04i2c: Add generic I2C multiplexer using pinctrl APIStephen Warren
This is useful for SoCs whose I2C module's signals can be routed to different sets of pins at run-time, using the pinctrl API. +-----+ +-----+ | dev | | dev | +------------------------+ +-----+ +-----+ | SoC | | | | /----|------+--------+ | +---+ +------+ | child bus A, on first set of pins | |I2C|---|Pinmux| | | +---+ +------+ | child bus B, on second set of pins | \----|------+--------+--------+ | | | | | +------------------------+ +-----+ +-----+ +-----+ | dev | | dev | | dev | +-----+ +-----+ +-----+ Signed-off-by: Stephen Warren <swarren@nvidia.com> Acked-by: Linus Walleij <linus.walleij@linaro.org> Acked-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
2012-06-04iommu/amd: Fix deadlock in ppr-handling error pathJoerg Roedel
In the error path of the ppr_notifer it can happen that the iommu->lock is taken recursivly. This patch fixes the problem by releasing the iommu->lock before any notifier is invoked. This also requires to move the erratum workaround for the ppr-log (interrupt may be faster than data in the log) one function up. Cc: stable@vger.kernel.org # v3.3, v3.4 Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-06-04iommu/amd: Cache pdev pointer to root-bridgeJoerg Roedel
At some point pci_get_bus_and_slot started to enable interrupts. Since this function is used in the amd_iommu_resume path it will enable interrupts on resume which causes a warning. The fix will use a cached pointer to the root-bridge to re-enable the IOMMU in case the BIOS is broken. Cc: stable@vger.kernel.org Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
2012-06-04OMAPDSS: DSI: Fix bug when calculating LP command interleaving parametersArchit Taneja
In function dsi_compute_interleave_lp(), the escape clock/LP clock time period is calculated incorrectly. The escape clock/LP clock is calculated as: LP Clock(Hz) = DSI_FCLK(Hz) / lp_clk_div Since we are calculating the time period of LP clock, the LP clock divider should be multiplied with the time period of DSI_FCLK. Calculating incorrect value of txclkesc results in incorrect calculation of LP interleaving parameters, it also creates a possibility of a divide by zero error. Reported-by: Sureshkumar Manimuthu <mail2msuresh@ti.com> Signed-off-by: Archit Taneja <archit@ti.com> Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-06-04OMAPDSS: fix bogus WARN_ON in dss_runtime_put()Tomi Valkeinen
pm_runtime_put_sync() in dss_runtime_put() returns -EBUSY when any child of dss is still enabled. This happens, for example, when a display output is enabled and one dumps the clocks via debugfs. This causes dss_runtime_get & put to be called. While I couldn't find anything about this in the documentation and it wasn't immediately clear from runtime_pm code, it looks to me that pm_runtime_put_sync() returns -EBUSY to inform that things went fine, but the device could not be turned off as there are still child devices that are enabled. This is not a problem. This patch skips the WARN_ON if pm_runtime_put_sync() returns -EBUSY. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-06-04OMAPDSS: Taal: fix compilation warningTomi Valkeinen
This patch fixes a warning: drivers/video/omap2/displays/panel-taal.c: In function ‘taal_num_errors_show’: drivers/video/omap2/displays/panel-taal.c:529: warning: ‘errors’ may be used uninitialized in this function Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-06-04OMAPDSS: fix build when DEBUG_FS or DSS_DEBUG_SUPPORT disabledTomi Valkeinen
If CONFIG_DEBUG_FS or CONFIG_OMAP2_DSS_DEBUG_SUPPORT is disabled, the build fails: drivers/video/omap2/dss/core.c:197:50: error: static declaration of 'dss_debugfs_create_file' follows non-static declaration drivers/video/omap2/dss/dss.h:166:5: note: previous declaration of 'dss_debugfs_create_file' was here This patch fixes the dummy dss_debugfs_create_file() so that the driver builds. Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
2012-06-04IB/mlx4: Fix EQ deallocation in legacy modeShlomo Pongratz
Commit e605b743f33d ("IB/mlx4: Increase the number of vectors (EQs) available for ULPs") didn't handle correctly the case where there aren't enough MSI-X vectors to increase the number of EQs, so only the legacy EQs are allocated. This results in an attempt to memset() to zero the EQ table which was never allocated and a kernel crash. Fix this by checking in the teardown flow if the table of EQs was ever allocated. Also remove some unneeded setting to zero of the EQ related fields in struct mlx4_ib_dev. Signed-off-by: Shlomo Pongratz <shlomop@mellanox.com> Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-04RDMA/cxgb4: Fix crash when peer address is 0.0.0.0Thadeu Lima de Souza Cascardo
When using rping -c -a 0.0.0.0 with iw_cxgb4, the system crashes when rdma_connect() is called. ip_dev_find() will return NULL, but pdev is accessed anyway. Checking that pdev is NULL and returning -ENODEV prevents the system from crashing. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Acked-by: Steve Wise <swise@opengridcomputing.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-06-04Merge branches 'bugfix-battery', 'bugfix-misc', 'bugfix-rafael', ↵Len Brown
'bugfix-turbostat', 'bugfix-video' and 'workaround-pss' into release bug fixes Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04Merge branch 'upstream' into bugfix-videoLen Brown
Update bugfix-video branch to 2.5-rc1 so I don't have to again resolve the conflict in these patches vs. upstream. Conflicts: drivers/gpu/drm/gma500/psb_drv.c text conflict: add comment vs delete neighboring line keep just this: /* igd_opregion_init(&dev_priv->opregion_dev); */ /* acpi_video_register(); */ Signed-off-by: Len Brown <len.brown@intel.com>
2012-06-04gpio/samsung: fix the typo 'exynos5_xxx' instead of 'exonys5_xxx'Kukjin Kim
Should be 'exynos5_xxx' instead of 'exonys5_xxx'. It happened at the commit 30b842889eea ("Merge tag 'soc2' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc") during v3.5 merge window. Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> [ My bad - Linus ] Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>