summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2008-02-09x86: fix sparse warnings in acpi/bus.cHarvey Harrison
Add function definition and extern variables to asm-x86/acpi.h. All of these are used in bus.c in ifdef(CONFIG_X86) sections, so are only added to the x86 include headers. boot.c already includes acpi.h so no changes are needed there. Fixes the following: arch/x86/kernel/acpi/boot.c:83:4: warning: symbol 'acpi_sci_flags' was not declared. Should it be static? arch/x86/kernel/acpi/boot.c:84:5: warning: symbol 'acpi_sci_override_gsi' was not declared. Should it be static? arch/x86/kernel/acpi/boot.c:421:13: warning: symbol 'acpi_pic_sci_set_trigger' was not declared. Should it be static? Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com> Signed-off-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
2008-02-09Merge branch 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6Linus Torvalds
* 'for-linus' of git://git390.osdl.marist.edu/pub/scm/linux-2.6: [S390] dynamic page tables. [S390] Add four level page tables for CONFIG_64BIT=y. [S390] 1K/2K page table pages. [S390] Remove a.out header file. [S390] sclp_vt220: Fix vt220 initialization [S390] qdio: avoid hang when establishing qdio queues [S390] VMEM_MAX_PHYS overflow on 31 bit. [S390] zcrypt: Do not start ap poll thread per default [S390] Fix __ffs_word_loop/__ffz_word_loop inlnie assembly. [S390] Wire up new timerfd syscalls. [S390] Update default configuration.
2008-02-09Merge git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuildLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: Kbuild: Fix deb-pkg target to work with kernel versions ending with -<text-without-digit> ide: introduce HAVE_IDE kbuild: silence CHK/UPD messages according to $(quiet) scsi: fix makefile for aic7(3*x) kbuild/modpost: Use warn() for announcing section mismatches Add binoffset to gitignore kbuild/modpost: improve warnings if symbol is unknown
2008-02-09Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: Merge branches 'release' and 'buildfix' into release acer-wmi - Add documentation sonypi - Move sonypi.txt to Documentation/laptops sony-laptop - Move sony-laptop.txt to Documentation/laptops thinkpad-acpi - Move thinkpad-acpi.txt to Documentation/laptops Documentation - Create laptops sub-directory ACPI: thermal: buildfix for CONFIG_THERMAL=n cpuidle: build fix for non-x86 acer-wmi: Fix backlight on AMW0 (V1) laptops tc1100-wmi: Mark as experimental ACPI: SBS: Host controller must initialize before SBS.
2008-02-09Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/drzeus/mmc: mmc: extend ricoh_mmc to support Ricoh RL5c476 at91_mci: use generic GPIO calls sdhci: add num index for multi controllers case MAINTAINERS: remove non-existant URLs mmc: remove sdhci and mmc_spi experimental markers mmc: Handle suspend/resume in Ricoh MMC disabler
2008-02-09Merge git://git.infradead.org/mtd-2.6Linus Torvalds
* git://git.infradead.org/mtd-2.6: [MTD] [NAND] cs553x_nand: command line partitioning support
2008-02-09memstick: initial commit for Sony MemoryStick supportAlex Dubov
Sony MemoryStick cards are used in many products manufactured by Sony. They are available both as storage and as IO expansion cards. Currently, only MemoryStick Pro storage cards are supported via TI FlashMedia MemoryStick interface. [mboton@gmail.com: biuld fix] [akpm@linux-foundation.org: build fix] Signed-off-by: Alex Dubov <oakad@yahoo.com> Signed-off-by: Miguel Boton <mboton@gmail.co> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-09ub: fix up the conversion to sg_init_table()Pete Zaitcev
Signed-off-by: Pete Zaitcev <zaitcev@redhat.com> Cc: "Oliver Pinter" <oliver.pntr@gmail.com> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-09[S390] sclp_vt220: Fix vt220 initializationChristian Borntraeger
There are two problems in the vt220 intialization: o Currently the vt220 console looses early printk events until the the vt220 tty is registered. o console should work if tty_register fails sclp_vt220_con_init calls __sclp_vt220_init and register_console. It does not register the driver with the sclp core code via sclp_register. That results in an sclp_send_mask=0. Therefore, __sclp_vt220_emit will reject buffers with EIO. Unfortunately register_console will cause the printk buffer to be sent to the console and, therefore, every early message gets dropped. The sclp_send_mask is set later during boot, when sclp_vt220_tty_init calls sclp_register. The solution is to move the sclp_register call from sclp_vt220_tty_init to __sclp_vt220_init. This makes sure that the console is properly registered with the sclp subsystem before the first log buffer messages are passed to the vt220 console. We also adopt the cleanup on error to keep the console alive if tty_register fails. Thanks to Peter Oberparleiter and Heiko Carstens for review and ideas for improvement. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-09[S390] qdio: avoid hang when establishing qdio queuesUrsula Braun
If qdio establish runs in parallel with a channel error, ccw_device_start_timeout may not trigger the qdio_timeout_handler. In this case neither QDIO_IRQ_STATE_ESTABLISHED nor QDIO_IRQ_STATE_ERR is reached and the following wait_event hangs forever. Solution: do not make use of the timeout option with ccw_device_start, but add a timeout to the following wait_event. Signed-off-by: Ursula Braun <braunu@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-09[S390] zcrypt: Do not start ap poll thread per defaultFelix Beck
Do not start ap poll thread per default to increase perfomance with z/VM. Signed-off-by: Felix Beck <felix.beck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2008-02-09ide: introduce HAVE_IDESam Ravnborg
To allow flexible configuration of IDE introduce HAVE_IDE. All archs except arm, um and s390 unconditionally select it. For arm the actual configuration determine if IDE is supported. This is a step towards introducing drivers/Kconfig for arm. Signed-off-by: Sam Ravnborg <sam@ravnborg.org> Acked-by: Russell King - ARM Linux <linux@arm.linux.org.uk> Acked-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
2008-02-09scsi: fix makefile for aic7(3*x)Sam Ravnborg
Fix bug introduced by my latest fix to the aic7xxx Makefile. Test build on x86 32 and 64 bit. Without and with -j (parallel build) Building firmaware is br0ken with O=... but this is unrelated to this bug-fix. Tested-by: Adrian Bunk <bunk@kernel.org> Cc: James Bottomley <James.Bottomley@HansenPartnership.com> Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-02-09Merge branches 'release', 'wmi' and 'laptop-docs' into releaseLen Brown
2008-02-09Merge branches 'release' and 'bugzilla-9910' into releaseLen Brown
2008-02-09acer-wmi - Add documentationCarlos Corbacho
Add some initial documentation detailing what acer-wmi is, and how to use it. Update the Kconfig entry with a reference to the documentation. Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-09sonypi - Move sonypi.txt to Documentation/laptopsCarlos Corbacho
Also update references to sonypi.txt in Kconfig. Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> CC: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-09sony-laptop - Move sony-laptop.txt to Documentation/laptopsCarlos Corbacho
Also update references to sony-laptop.txt in Kconfig. Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> CC: Mattia Dongili <malattia@linux.it> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-09thinkpad-acpi - Move thinkpad-acpi.txt to Documentation/laptopsCarlos Corbacho
Also update references to thinkpad-acpi.txt in Kconfig. Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> CC: Henrique de Moraes Holschuh <hmh@hmh.eng.br> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-09cpuidle: build fix for non-x86Venki Pallipadi
The last posted version of this patch gave compile error on IA64. So, here goes yet another rewrite of the patch. Convert cpu_idle_wait() to cpuidle_kick_cpus() which is SMP-only, and gives error on non supported CPU. Changes from last patch sent by Kevin: Moved the definition of kick_cpus back to cpuidle.c from cpuidle.h: * Having it in .h gives #error on archs which includes the header file without actually having CPU_IDLE configured. To make it work in .h, we need one more #ifdef around that code which makes it messy. * Also, the function is only called from one file. So, it can be in declared statically in .c rather than making it available to everyone who includes the .h file. Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com> Signed-off-by: Kevin Hilman <khilman@mvista.com> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-09acer-wmi: Fix backlight on AMW0 (V1) laptopsCarlos Corbacho
There is some leftover cruft from the old quirk infrastructure that causes us to be unable to set the backlight on older laptops. Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-09tc1100-wmi: Mark as experimentalCarlos Corbacho
tc1100-wmi has not undergone as much testing as acer-wmi, so it certainly should be marked as experimental as well until we get more user feedback. Signed-off-by: Carlos Corbacho <carlos@strangeworlds.co.uk> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-09ACPI: SBS: Host controller must initialize before SBS.Alexey Starikovskiy
In static case sbshc must be compiled ahead of sbs, so that hc is configured first. http://bugzilla.kernel.org/show_bug.cgi?id=9910 Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de> Signed-off-by: Len Brown <len.brown@intel.com>
2008-02-09[MTD] [NAND] cs553x_nand: command line partitioning supportMart Raudsepp
Implements kernel command line partitioning support for the CS5535/CS5536 chipsets driver. For that the following is done: * cs553x_cleanup(): try the cleanup for all chip selects to not leak memory * Assign a unique name for each chip select to be separately addressable in the command line mtd-id portion(s) * Use the already defined PIN_OPT_IDE constant where appropriate for readability * Include command line partitioning support when CONFIG_MTD_PARTS is set Signed-off-by: Mart Raudsepp <mart.raudsepp@artecdesign.ee> Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2008-02-08Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/core: Remove unused struct ib_device.flags member IB/core: Add IP checksum offload support IPoIB: Add send gather support IPoIB: Add high DMA feature flag IB/mlx4: Use multiple WQ blocks to post smaller send WQEs mlx4_core: Clean up struct mlx4_buf mlx4_core: For 64-bit systems, vmap() kernel queue buffers IB/mlx4: Consolidate code to get an entry from a struct mlx4_buf
2008-02-08DCA: convert struct class_device to struct device.Kay Sievers
Thanks to Kay for keeping us honest. Signed-off-by: Kay Sievers <kay.sievers@vrfy.org> Signed-off-by: Shannon Nelson <shannon.nelson@intel.com> Cc: "Williams, Dan J" <dan.j.williams@intel.com> Acked-by: Greg KH <greg@kroah.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08x25_asy: Fix ref count rule violationAlan Cox
x25_asy does not take an ldisc reference before calling the flush method. Fix it to use the helper function we provide. Signed-off-by: Alan Cox <alan@redhat.com> Cc: Krzysztof Halasa <khc@pm.waw.pl> Cc: "David S. Miller" <davem@davemloft.net> Cc: Jeff Garzik <jeff@garzik.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08IPoIB: Add send gather supportEli Cohen
This patch acts as a preparation for using checksum offload for IB devices capable of inserting/verifying checksum in IP packets. The patch does not actaully turn on NETIF_F_SG - we defer that to the patches adding checksum offload capabilities. We only add support for send gathers for datagram mode, since existing HW does not support checksum offload on connected QPs. Signed-off-by: Michael S. Tsirkin <mst@mellanox.co.il> Signed-off-by: Eli Cohen <eli@mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-08IPoIB: Add high DMA feature flagEli Cohen
All current InfiniBand devices can handle all DMA addresses, and it's hard to imagine anyone would be silly enough to build a new device that couldn't. Therefore, enable the NETIF_F_HIGHDMA feature for IPoIB. This has no effect for no, but is needed when we enable gather/scatter support and checksum stateless offloads. Signed-off-by: Eli Cohen <eli@mellnaox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-08IB/mlx4: Use multiple WQ blocks to post smaller send WQEsJack Morgenstein
ConnectX HCA supports shrinking WQEs, so that a single work request can be made of multiple units of wqe_shift. This way, WRs can differ in size, and do not have to be a power of 2 in size, saving memory and speeding up send WR posting. Unfortunately, if we do this then the wqe_index field in CQEs can't be used to look up the WR ID anymore, so our implementation does this only if selective signaling is off. Further, on 32-bit platforms, we can't use vmap() to make the QP buffer virtually contigious. Thus we have to use constant-sized WRs to make sure a WR is always fully within a single page-sized chunk. Finally, we use WRs with the NOP opcode to avoid wrapping around the queue buffer in the middle of posting a WR, and we set the NoErrorCompletion bit to avoid getting completions with error for NOP WRs. However, NEC is only supported starting with firmware 2.2.232, so we use constant-sized WRs for older firmware. And, since MLX QPs only support SEND, we use constant-sized WRs in this case. When stamping during NOP posting, do stamping following setting of the NOP WQE valid bit. Signed-off-by: Michael S. Tsirkin <mst@dev.mellanox.co.il> Signed-off-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: Roland Dreier <rolandd@cisco.com>
2008-02-08Merge branch 'cris' of git://www.jni.nu/crisLinus Torvalds
* 'cris' of git://www.jni.nu/cris: (158 commits) CRIS v32: Remove hwregs/timer_defs.h, it is now architecture specific. CRIS v32: Change drivers/i2c.c locking. CRIS v32: Rewrite ARTPEC-3 gpio driver to avoid volatiles and general cleanup. CRIS: Add new timerfd syscall entries. MAINTAINERS: Add my information for the CRIS port. CRIS v32: Correct spelling of bandwidth in function name. CRIS v32: Clean up nandflash.c for ARTPEC-3 and ETRAX FS. CRIS v10: Cleanup of drivers/gpio.c CRIS v10: drivers/net/cris/eth_v10.c rename LED defines to CRIS_LED to avoid name clash. CRIS: Make io_pwm_set_period members unsigned in etraxgpio.h CRIS: Move ETRAX_AXISFLASHMAP to common Kconfig file. CRIS: Drop regs parameter from call to profile_tick in kernel/time.c CRIS v32: Fix minor formatting issue in mach-a3/io.c CRIS v32: Initialize GIO even if we're rambooting in kernel/head.S CRIS v32: Remove kernel/arbiter.c, it now exists in machine dependent directory. CRIS v32: Minor changes to avoid errors in asm-cris/arch-v32/hwregs/reg_rdwr.h CRIS v32: arch-v32/hwregs/intr_vect_defs.h moved to machine dependent directory. CRIS v32: Correct offset for TASK_pid in asm-cris/arch-v32/offset.h CRIS v32: Move register map header to machine dependent directory. CRIS v32: Let compiler know that memory is clobbered after a break op. ...
2008-02-08Merge branch 'for-linus' of git://git.kernel.dk/linux-2.6-blockLinus Torvalds
* 'for-linus' of git://git.kernel.dk/linux-2.6-block: Enhanced partition statistics: documentation update Enhanced partition statistics: remove old partition statistics Enhanced partition statistics: procfs Enhanced partition statistics: sysfs Enhanced partition statistics: aoe fix Enhanced partition statistics: update partition statitics Enhanced partition statistics: core statistics block: fixup rq_init() a bit Manually fixed conflict in drivers/block/aoe/aoecmd.c due to statistics support.
2008-02-08Merge branch 'for-2.6.25' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc * 'for-2.6.25' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc: [POWERPC] Add arch-specific walk_memory_remove() for 64-bit powerpc [POWERPC] Enable hotplug memory remove for 64-bit powerpc [POWERPC] Add remove_memory() for 64-bit powerpc [POWERPC] Make cell IOMMU fixed mapping printk more useful [POWERPC] Fix potential cell IOMMU bug when switching back to default DMA ops [POWERPC] Don't enable cell IOMMU fixed mapping if there are no dma-ranges [POWERPC] Fix cell IOMMU null pointer explosion on old firmwares [POWERPC] spufs: Fix timing dependent false return from spufs_run_spu [POWERPC] spufs: No need to have a runnable SPU for libassist update [POWERPC] spufs: Update SPU_Status[CISHP] in backing runcntl write [POWERPC] spufs: Fix state_mutex leaks [POWERPC] Disable G5 NAP mode during SMU commands on U3
2008-02-08Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (21 commits) [IPSEC] flow: reorder "struct flow_cache_entry" and remove SLAB_HWCACHE_ALIGN [DECNET] ROUTE: remove unecessary alignment [IPSEC]: Add support for aes-ctr. [ISDN]: fix section mismatch warning in enpci_card_msg [TIPC]: declare proto_ops structures as 'const'. [TIPC]: Kill unused static inline (x5) [TC]: oops in em_meta [IPV6] Minor cleanup: remove unused definitions in net/ip6_fib.h [IPV6] Minor clenup: remove two unused definitions in net/ip6_route.h [AF_IUCV]: defensive programming of iucv_callback_txdone [AF_IUCV]: broken send_skb_q results in endless loop [IUCV]: wrong irq-disabling locking at module load time [CAN]: Minor clean-ups [CAN]: Move proto_{,un}register() out of spin-locked region [CAN]: Clean up module auto loading [IPSEC] flow: Remove an unnecessary ____cacheline_aligned [IPV4]: route: fix crash ip_route_input [NETFILTER]: xt_iprange: add missing #include [NETFILTER]: xt_iprange: fix typo in address family [NETFILTER]: nf_conntrack: fix ct_extend ->move operation ...
2008-02-08Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6: acer-wmi, tc1100-wmi: select ACPI_WMI ACPI: WMI: Improve Kconfig description ACPI: DMI: add Panasonic CF-52 and Thinpad X61 ACPI: thermal: syntax, spelling, kernel-doc intel_menlo: build on X86 only ACPI: build WMI on X86 only ACPI: cpufreq: Print _PPC changes via cpufreq debug layer ACPI: add newline to printk
2008-02-08fs/char_dev.c: chrdev_open marked static and removed from fs.hDenis Cheng
There is an outdated comment in serial_core.c also fixed. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08NBD: remove limit on max number of nbd devicesPaul Clements
Remove the arbitrary 128 device limit for NBD. nbds_max can now be set to any number. In certain scenarios where devices are used sparsely we have run into the 128 device limit. Signed-off-by: Paul Clements <paul.clements@steeleye.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08Char: applicom, use pci_match_idJiri Slaby
Instead of testing hardcoded values, use pci_match_id to reference the pci_device_id table. Sideways, it allows easy new additions to the table. [akpm@linux-foundation.org: remove wrongly-added semicolon] Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08Char: applicom, use pci_resource_startJiri Slaby
Use pci_resource_start instead of accessing pci_dev struct internals. Signed-off-by: Jiri Slaby <jirislaby@gmail.com> Cc: WANG Cong <xiyou.wangcong@gmail.com> Cc: David Woodhouse <dwmw2@infradead.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08mount options: fix capifsMiklos Szeredi
Add a .show_options super operation to capifs. Use generic_show_options() and save the complete option string in capifs_remount(). Signed-off-by: Miklos Szeredi <mszeredi@suse.cz> Acked-by: Karsten Keil <kkeil@suse.de> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08PWM LED driverDavid Brownell
This is a LED driver using the PWM on newer SOCs from Atmel; brightness is controlled by changing the PWM duty cycle. So for example if you've set up two leds labeled "pwm0" and "pwm1": echo 0 > /sys/class/leds/pwm2/brightness # off (0%) echo 80 > /sys/class/leds/pwm2/brightness echo 255 > /sys/class/leds/pwm2/brightness # on (100%) Note that "brightness" here isn't linear; maybe that should change. Going from 4 to 8 probably doubles perceived brightness, while 244 to 248 is imperceptible. This is mostly intended to be a simple example of PWM, although it's realistic since LCD backlights are often driven with PWM to conserve battery power (and offer brightness options). Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08Basic PWM driver for AVR32 and AT91David Brownell
PWM device setup, and a simple PWM driver exposing a programming interface giving access to each channel's full capabilities. Note that this doesn't support starting several channels in synch. [hskinnemoen@atmel.com: allocate platform device dynamically] [hskinnemoen@atmel.com: Kconfig fix] Signed-off-by: David Brownell <dbrownell@users.sourceforge.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08atmel_serial: show tty name in /proc/interruptsHaavard Skinnemoen
When possible, pass the tty name to request_irq() so that the user can easily distinguish the different serial ports in /proc/interrupts. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Tested-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08atmel_serial: use container_of instead of direct castHaavard Skinnemoen
As pointed out by David Brownell, we really ought to be using container_of when converting from "struct uart_port *" to "struct atmel_uart_port *". Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Tested-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08atmel_serial: fix broken RX buffer allocationHaavard Skinnemoen
Introduced by atmel_serial-split-the-interrupt-handler.patch. Thanks to michael <trimarchi@gandalf.sssup.it> for spotting it. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08atmel_serial: add DMA supportChip Coldwell
This patch is based on the DMA-patch by Chip Coldwell for the AT91/AT32 serial USARTS, with some tweaks to make it apply neatly on top of the other patches in this series. The RX and TX code has been moved to a tasklet and reworked a bit. Instead of depending on the ENDRX and TIMEOUT bits in CSR, we simply grab as much data as we can from the DMA buffers. I think this closes a race where the ENDRX bit is set after we read CSR but before we read RPR, although I haven't confirmed this. Similarly, the two TX handlers (ENDTX and TXBUFE) have been combined into one. Since the current code only uses a single TX buffer, there's no point in handling those interrupts separately. This also fixes a DMA sync bug in the original patch. [linux@bohmer.net: rebased onto irq-splitup patch] [hskinnemoen@atmel.com: moved to tasklet, fixed dma bug, misc cleanups] [hskinnemoen@atmel.com: atmel_serial dma: Misc fixes and cleanups] Signed-off-by: Remy Bohmer <linux@bohmer.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Tested-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08atmel_serial: split the interrupt handlerRemy Bohmer
Split up the interrupt handler of the serial port into a interrupt top-half and a tasklet. The goal is to get the interrupt top-half as short as possible to minimize latencies on interrupts. But the old code also does some calls in the interrupt handler that are not allowed on preempt-RT in IRQF_NODELAY context. This handler is executed in this context because of the interrupt sharing with the timer interrupt. The timer interrupt on Preempt-RT runs in IRQF_NODELAY context. The tasklet takes care of handling control status changes, pushing incoming characters to the tty layer, handling break and other errors. It also handles pushing TX data into the data register. Reading the complete receive queue is still done in the top-half because we never want to miss any incoming character. [hskinnemoen@atmel.com: misc cleanups and simplifications] Signed-off-by: Remy Bohmer <linux@bohmer.net> Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Tested-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08atmel_serial: fix bugs in probe() error path and remove()Haavard Skinnemoen
When an error happens in probe(), the clocks should be disabled, but only if the port isn't already used as a console. In remove(), the port struct shouldn't be freed because it's defined statically. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Cc: Andrew Victor <linux@maxim.org.za> Tested-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08atmel_serial: use existing console options only if BRG is runningHaavard Skinnemoen
If BRGR is zero, the baud rate generator isn't running, so the boot loader can't have initialized the port. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Tested-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08atmel_serial: use cpu_relax() when busy-waitingHaavard Skinnemoen
Replace two instances of barrier() with cpu_relax() since that's the right thing to do when busy-waiting. This does not actually change anything since cpu_relax() is defined as barrier() on both ARM and AVR32. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Andrew Victor <linux@maxim.org.za> Tested-by: Marc Pignat <marc.pignat@hevs.ch> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>