summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-10-25gianfar_ptp: use iomem, not ioports resource tree in probeWei Yang
When using a 36 bit dtb file, the driver complains "resource busy". Investigating the source of the message leads one to the gianfar_ptp_probe function. Since the type of the device resource requested in this function is IORESOURCE_MEM, it should use "iomem_resource" instead of "ioports_resource". Signed-off-by: Wei Yang <Wei.Yang@windriver.com> Cc: Claudiu Manoil <claudiu.manoil@freescale.com> Cc: Timur Tabi <timur@freescale.com> Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-25Merge branch 'fixes-for-3.7' of git://gitorious.org/linux-can/linux-canDavid S. Miller
Marc Kleine-Budde says: ==================== here are two patches for the v3.7 release cycle. A patch by Wolfgang Grandegger for the flexcan driver, which switches off a workaround on the imx6q that is not needed, because the hardware is not affected by that bug. And a patch by Stephane Grosjean which updates the pci device table for the peak pci sja1000 ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-25NET_VENDOR_TI: make available for am33xx as wellPeter Korsgaard
The cpsw/davinci mdio ip cores are present on am33xx, so make NET_VENDOR_TI visible for it as well. Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-25pch_gbe: fix error handling in pch_gbe_up()Veaceslav Falico
If we fail to allocate rx buffers pool by any reason, we'll just return with an error, however we've previously successfully requested an irq. Fix this by releasing the irq before returning the error. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-24can: sja1000: fix/add miniPCIe/cPCI PC/104Plus PCI/104e PEAK-System boardsStephane Grosjean
This patch adds the support for 4 new PCI boards based on the SJA1000 CAN controller, from PEAK-System Technik: . PCAN-miniPCIe (PCI-Express Mini slots, available as single or dual-channel) . PCAN-cPCI (CompactPCI format, available as single or dual-channel) . PCAN-PC/104-Plus (PC/104-Plus system, av. as 1, 2 or 4 channels) . PCAN-PCI/104-Express (PCI/104-Express system, av. as 1 or 2 channels) This patch also fixes a typo in existing "PEAK_MPCI_DEVICE_ID" identifier (missing "e" for Express). Finally, it also changes the author as well as it updates the module supported devices list. Signed-off-by: Stephane Grosjean <s.grosjean@peak-system.com> Acked-by: Oliver Hartkopp <socketcan@hartkopp.net> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-10-23can: flexcan: disable bus error interrupts for the i.MX6qWolfgang Grandegger
This patch adds some Flexcan version info and removes the feature flag FLEXCAN_HAS_BROKEN_ERR_STATE for the i.MX6Q. It also has the line [TR]WRN_INT properly connected. Cc: Hui Wang <jason77.wang@gmail.com> Cc: Shawn Guo <shawn.guo@linaro.org> Signed-off-by: Wolfgang Grandegger <wg@grandegger.com> [mkl: convert to incremental patch] Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de>
2012-10-23pch_gbe: don't reset MAC_RX on FIFO overflowVeaceslav Falico
Currently, when FIFO_ERR happens, we stop the dma, wait for it to become idle and then reset the whole MAC_RX logic (and after that we must re-set multicast addresses and also re-enable MAC_RX when we're finally ready to accept new packets). This leads to CRC errors on high number of incoming packets and is not needed according to the datasheet. This patch fixes it by the following steps: 1) remove this reset in pch_gbe_stop_receive(), which causes some functions to not be used anywhere 2) remove already unused functions pch_gbe_wait_clr_bit_irq() and pch_gbe_mac_reset_rx() to correctly build 3) move pch_gbe_enable_mac_rx() out of pch_gbe_start_receive() to pch_gbe_up() where it's only needed after we've removed the MAC_RX reset 4) rename pch_gbe_start/stop_receive() to pch_gbe_enable/disable_dma_rx() to more precisely reflect what the functions are now doing. After these changes we already don't see the CRC errors and gain some increase in RX processing speed. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23pch_gbe: don't re-set RX_FIFO_ERR flag in napi_pollVeaceslav Falico
If we were in RX_FIFO_ERR state and entered pch_gbe_napi_poll(), we'll anyway clean some rx space and thus can continue to receive more packets. Currently, we re-set the RX_FIFO_ERR in situations when we've exhausted our budget for RX cleaning or cleaned some TX packets. Removing it gives us +20%-40% speed increase and a lot less of RX_FIFO_ERRors reported. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-23pch_gbe: create functions for MAC_RX {en,dis}ableVeaceslav Falico
Move MAC_RX-related bits into separate functions. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-22qla3xxx: Ensure request/response queue addr writes to the registersJoe Jin
Before use the request and response queue addr, make sure it has wrote to the registers. Signed-off-by: Joe Jin <joe.jin@oracle.com> Cc: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Cc: Ron Mercer <ron.mercer@qlogic.com> Acked-by: Jitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-22Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless John W. Linville says: ==================== This is a batch of fixes intended for the 3.7 stream. Dan Carpenter brings a fix for a simple signedness bug that could prevent the proper termination of a loop. Felix Fietkau found a few more places that need to use ieee80211_free_txskb for properly releasing SKBs used by mac80211. Franky Lin offers a pair of brcmfmac fixes, both fixing simple state reporting errors. Hante Meuleman corrects an error reporting case that wasn't handling all types of errors properly. Johan Hedberg offers a fix for an issue discovered at the Bluetooth UnPlug Fest. Gustavo says "the patch fixes a failure to pair with devices that support the LE Secure Connections feature." Johannes Berg sends an iwlwifi fix to handle a message type that is too large for the normal command mechanism. He also provides a mac80211 fix to use HT20 channels when HT40 channels are not permitted. Jouni Malinen offers a mac80211 fix for a masking error that was incorrectly marking some frames. Piotr Haber provides a fix to make sure bcma devices are unregistered properly. Stanislav Yakovlev gives us a fix for a panic in the ipw2200 driver. Stanislaw Gruszka sends a pair of fixes: one prevents a mismatch on connection states between cfg80211 and mac80211; the other prevents some frame corruption related to handling encryption. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-22cxgb4: Remove unnecessary #ifdef conditionVipul Pandya
This patch also fixes the build failure caused due to removal of #ifdef CONFIG_CHELSIO_T4_OFFLOAD condition Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-19Merge branch 'master' of ↵John W. Linville
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless into for-davem
2012-10-18net: qmi_wwan: adding more ZTE devicesBjørn Mork
Analyzed a few Windows driver description files, supporting this long list of devices: %ztewwan.DeviceDesc0002% = ztewwan.ndi, USB\VID_19D2&PID_0002&MI_01 %ztewwan.DeviceDesc0012% = ztewwan.ndi, USB\VID_19D2&PID_0012&MI_01 %ztewwan.DeviceDesc0017% = ztewwan.ndi, USB\VID_19D2&PID_0017&MI_03 %ztewwan.DeviceDesc0021% = ztewwan.ndi, USB\VID_19D2&PID_0021&MI_04 %ztewwan.DeviceDesc0025% = ztewwan.ndi, USB\VID_19D2&PID_0025&MI_01 %ztewwan.DeviceDesc0031% = ztewwan.ndi, USB\VID_19D2&PID_0031&MI_04 %ztewwan.DeviceDesc0042% = ztewwan.ndi, USB\VID_19D2&PID_0042&MI_04 %ztewwan.DeviceDesc0049% = ztewwan.ndi, USB\VID_19D2&PID_0049&MI_05 %ztewwan.DeviceDesc0052% = ztewwan.ndi, USB\VID_19D2&PID_0052&MI_04 %ztewwan.DeviceDesc0055% = ztewwan.ndi, USB\VID_19D2&PID_0055&MI_01 %ztewwan.DeviceDesc0058% = ztewwan.ndi, USB\VID_19D2&PID_0058&MI_04 %ztewwan.DeviceDesc0063% = ztewwan.ndi, USB\VID_19D2&PID_0063&MI_04 %ztewwan.DeviceDesc2002% = ztewwan.ndi, USB\VID_19D2&PID_2002&MI_04 %ztewwan.DeviceDesc0104% = ztewwan.ndi, USB\VID_19D2&PID_0104&MI_04 %ztewwan.DeviceDesc0113% = ztewwan.ndi, USB\VID_19D2&PID_0113&MI_05 %ztewwan.DeviceDesc0118% = ztewwan.ndi, USB\VID_19D2&PID_0118&MI_05 %ztewwan.DeviceDesc0121% = ztewwan.ndi, USB\VID_19D2&PID_0121&MI_05 %ztewwan.DeviceDesc0123% = ztewwan.ndi, USB\VID_19D2&PID_0123&MI_04 %ztewwan.DeviceDesc0124% = ztewwan.ndi, USB\VID_19D2&PID_0124&MI_05 %ztewwan.DeviceDesc0125% = ztewwan.ndi, USB\VID_19D2&PID_0125&MI_06 %ztewwan.DeviceDesc0126% = ztewwan.ndi, USB\VID_19D2&PID_0126&MI_05 %ztewwan.DeviceDesc1008% = ztewwan.ndi, USB\VID_19D2&PID_1008&MI_04 %ztewwan.DeviceDesc1010% = ztewwan.ndi, USB\VID_19D2&PID_1010&MI_04 %ztewwan.DeviceDesc1012% = ztewwan.ndi, USB\VID_19D2&PID_1012&MI_04 %ztewwan.DeviceDesc1402% = ztewwan.ndi, USB\VID_19D2&PID_1402&MI_02 %ztewwan.DeviceDesc0157% = ztewwan.ndi, USB\VID_19D2&PID_0157&MI_05 %ztewwan.DeviceDesc0158% = ztewwan.ndi, USB\VID_19D2&PID_0158&MI_03 %ztewwan.DeviceDesc1401% = ztewwan.ndi, USB\VID_19D2&PID_1401&MI_02 %ztewwan.DeviceDesc0130% = ztewwan.ndi, USB\VID_19D2&PID_0130&MI_01 %ztewwan.DeviceDesc0133% = ztewwan.ndi, USB\VID_19D2&PID_0133&MI_03 %ztewwan.DeviceDesc0176% = ztewwan.ndi, USB\VID_19D2&PID_0176&MI_03 %ztewwan.DeviceDesc0178% = ztewwan.ndi, USB\VID_19D2&PID_0178&MI_03 %ztewwan.DeviceDesc0168% = ztewwan.ndi, USB\VID_19D2&PID_0168&MI_04 ;EuFi890 %ztewwan.DeviceDesc0191% = ztewwan.ndi, USB\VID_19D2&PID_0191&MI_04 ;AL621 %ztewwan.DeviceDesc0167% = ztewwan.ndi, USB\VID_19D2&PID_0167&MI_04 ;MF821 %ztewwan.DeviceDesc0199% = ztewwan.ndi, USB\VID_19D2&PID_0199&MI_01 %ztewwan.DeviceDesc0200% = ztewwan.ndi, USB\VID_19D2&PID_0200&MI_01 %ztewwan.DeviceDesc0257% = ztewwan.ndi, USB\VID_19D2&PID_0257&MI_03 ;MF821V %ztewwan.DeviceDesc1018% = ztewwan.ndi, USB\VID_19D2&PID_1018&MI_03 ;MF91 %ztewwan.DeviceDesc1426% = ztewwan.ndi, USB\VID_19D2&PID_1426&MI_02 ;0141 %ztewwan.DeviceDesc1247% = ztewwan.ndi, USB\VID_19D2&PID_1247&MI_04 %ztewwan.DeviceDesc1425% = ztewwan.ndi, USB\VID_19D2&PID_1425&MI_02 %ztewwan.DeviceDesc1424% = ztewwan.ndi, USB\VID_19D2&PID_1424&MI_02 %ztewwan.DeviceDesc1252% = ztewwan.ndi, USB\VID_19D2&PID_1252&MI_04 %ztewwan.DeviceDesc1254% = ztewwan.ndi, USB\VID_19D2&PID_1254&MI_04 %ztewwan.DeviceDesc1255A% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_03 %ztewwan.DeviceDesc1255B% = ztewwan.ndi, USB\VID_19D2&PID_1255&MI_04 %ztewwan.DeviceDesc1256% = ztewwan.ndi, USB\VID_19D2&PID_1256&MI_04 %ztewwan.DeviceDesc1245% = ztewwanCombB.ndi, USB\VID_19D2&PID_1245&MI_04 %ztewwan.DeviceDesc1021% = ztewwan.ndi, USB\VID_19D2&PID_1021&MI_02 Adding the ones we were missing. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-18phy: add AT803x driverMatus Ujhelyi
This driver add support for wake over lan on AT803x phys. Signed-off-by: Matus Ujhelyi <ujhelyi.m@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-18usb/ipheth: Add iPhone 5 supportJay Purohit
I noticed that the iPhone ethernet driver did not support iPhone 5. I quickly added support to it in my kernel, here's a patch. Signed-off-by: Jay Purohit <jspurohit@velocitylimitless.com> Acked-by: Valdis Kletnieks <valdis.kletnieks@vt.edu> Signed-off-by: Jan Ceuleers <jan.ceuleers@computer.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking fixes from David Miller: 1) Fix regression in /proc/net/if_inet6, sometimes devices do not get listed. From Eric Dumazet. 2) Add IPSEC networking sub-section to MAINTAINERS. 3) S390 networking fixes from Hendrik Brueckner and Stefan Raspl. 4) Fix enslavement of devices that can't do VLAN properly, from Jiri Pirko. 5) SCTP sack handling fix from Zijie Pan. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: ipv6: addrconf: fix /proc/net/if_inet6 bnx2x: fix handling mf storage modes qeth: fix deadlock between recovery and bonding driver smsgiucv: reestablish IUCV path after resume sctp: fix call to SCTP_CMD_PROCESS_SACK in sctp_cmd_interpreter() vlan: fix bond/team enslave of vlan challenged slave/port MAINTAINERS: Add explicit section for IPSEC networking.
2012-10-17Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparcLinus Torvalds
Pull sparc fixes from David Miller: "Two sparc64 perf bug fixes and add a sysrq facility so I can diagnose these kinds of problems more quickly in the future." * git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc: sparc64: Fix bit twiddling in sparc_pmu_enable_event(). sparc64: Add global PMU register dumping via sysrq. sparc64: Like x86 we should check current->mm during perf backtrace generation.
2012-10-17Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
Pull SuperH updates from Paul Mundt. The bulk of this is the UAPI disintegration for SH. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh: Fix up more fallout from pointless ARM __iomem churn. sh: Wire up kcmp syscall. UAPI: (Scripted) Disintegrate arch/sh/include/asm
2012-10-17Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linuxLinus Torvalds
Pull drm fixes from Dave Airlie: "Fixes for i915, nouveau and radeon: - i915: haswell stability, modeset rework fallout, ums fix - nouveau: misc fixes from code rework - radeon: pll rework fixes, more 2 level PTE cleanups. - core: warning fixes on 32-bit." * 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (31 commits) nouveau: fix warning on 32-bit build. drm/nouveau/bios: fix typo in error message drm/nouveau: only call ttm_agp_tt_create when __OS_HAS_AGP drm/nv50/fb: fix double free of vram mm drm/nouveau/pm: do not stop reclocking if failing to set the fan speed drm/nouveau/pm: fix a typo related to the move to the therm subdev drm/nouveau/hwmon: fix the initialization condition drm: fix warning on 32-bit. drm: radeon: fix printk format warning drm/radeon: fix spelling typos in debugging output drm/radeon: Don't destroy I2C Bus Rec in radeon_ext_tmds_enc_destroy(). drm/radeon: check if pcie gen 2 is already enabled (v2) drm/radeon/cayman: set VM max pfn at MC init drm/radeon: separate pt alloc from lru add drm/radeon: don't add the IB pool to all VMs v2 drm/radeon: allocate page tables on demand v4 drm/radeon: update comments to clarify VM setup (v2) drm/radeon: allocate PPLLs from low to high drm/radeon: fix compilation with backlight disabled drm/radeon: use %zu for formatting size_t ...
2012-10-17Merge tag 'pinctrl-fixes-v3.7-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl Pull pinctrl fixes from Linus Walleij: "A number of pinctrl fixes for the v3.7 series: - duplicate includes, section markup, code mishaps - erroneous return value in errorpath on the bcm2835 driver - remove an unused sirf function that was causing build errors - multiple-platform compilation stubs and a missed code review comment fixup on the nomadik pin controller" * tag 'pinctrl-fixes-v3.7-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: pinctrl/nomadik: always use the simple irqdomain pinctrl/nomadik: provide stubs for legacy Nomadik pinctrl: remove duplicated include from pinctrl-xway.c pinctrl: sirf: remove sirfsoc_gpio_set_pull function pinctrl: fix return value in bcm2835_pinctrl_probe() pinctrl: remove duplicated include from pinctrl-bcm2835.c pinctrl: bcm2835: Use existing pointer to struct device pinctrl: samsung: use __devinit section for init code
2012-10-17Merge branch 'ipmi' (IPMI patches from Corey Minyard)Linus Torvalds
Merge emailed patches from Corey Minyard: "Remove some bogus docs, Fix ACPI/IPMI interactions, fix some warnings, and add register spacing detection for PCI interfaces." * ipmi: IPMI: Detect register spacing on PCI interfaces IPMI: Fix some uninitialized warning IPMI: Change link order ACPI: Reorder IPMI driver before any other ACPI drivers IPMI: Remove SMBus driver info from the docs
2012-10-17IPMI: Detect register spacing on PCI interfacesCorey Minyard
The IPMI spec defines a way to detect register spacing for PCI interfaces, so implement it. Signed-off-by: Steven Hsieh <sshsieh@broadcom.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-17IPMI: Fix some uninitialized warningCorey Minyard
There was a spot where the compiler couldn't tell some variables would be set. So initialize them to make the warning go away. Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-17IPMI: Change link orderMatthew Garrett
IPMI must be initialised before ACPI in order to ensure that any IPMI services are available before ACPI driver initialisation attempts to use any IPMI operation regions. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-17ACPI: Reorder IPMI driver before any other ACPI driversMatthew Garrett
Drivers may make calls that require the ACPI IPMI driver to have been initialised already, so make sure that it appears earlier in the build order. Signed-off-by: Matthew Garrett <mjg@redhat.com> Signed-off-by: Corey Minyard <cminyard@mvista.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-16bnx2x: fix handling mf storage modesDmitry Kravkov
Since commit a3348722 AFEX FCoE function is continuously reset. The patch prevents the resetting and removes debug print to stop garbaging syslog. Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Ariel Elior <ariele@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-16qeth: fix deadlock between recovery and bonding driverStefan Raspl
The recovery thread, when failing, tears down the respective interface. To do so, it needs to obtain the rtnl lock first, as the interface configuration is changed. If another process tries to modify an interface setting at the same time, that process can obtain the rtnl lock first, but the respective callback in the qeth driver will block until recovery has completed - which cannot happen since the calling process already obtained it. In one particular case, the bonding driver acquired the rtnl lock to modify the card's MAC address, while the recovery failed at the same time due to the card being removed. Hence qeth_l2_set_mac_address (implicitly holding the rtnl lock) was waiting on qeth_l2_recover, which deadlocked when waiting on the rtnl lock. This patch uses rtnl_trylock instead of rtnl_lock in the recovery thread. If the lock cannot be obtained, the interface will be left up, but the card state remains in CARD_STATE_RECOVER, which will prevent any further activities on the card. Signed-off-by: Stefan Raspl <raspl@linux.vnet.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Reviewed-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-16smsgiucv: reestablish IUCV path after resumeHendrik Brueckner
smsg_pm_restore_thaw() uses wrong checking before reconnecting the IUCV path to *MSG. It is corrected with this patch. Signed-off-by: Ursula Braun <ursula.braun@de.ibm.com> Signed-off-by: Frank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-16vlan: fix bond/team enslave of vlan challenged slave/portJiri Pirko
In vlan_uses_dev() check for number of vlan devs rather than existence of vlan_info. The reason is that vlan id 0 is there without appropriate vlan dev on it by default which prevented from enslaving vlan challenged dev. Reported-by: Jon Stanley <jstanley@rmrf.net> Signed-off-by: Jiri Pirko <jiri@resnulli.us> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-16sparc64: Add global PMU register dumping via sysrq.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-10-16iwlwifi: fix 6000 series channel switch commandJohannes Berg
The channel switch command for 6000 series devices is larger than the maximum inline command size of 320 bytes. The command is therefore refused with a warning. Fix this by allocating the command and using the NOCOPY mechanism. Cc: stable@kernel.org Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Signed-off-by: Johannes Berg <johannes.berg@intel.com>
2012-10-16nouveau: fix warning on 32-bit build.Dave Airlie
Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-10-16Merge branch 'drm-nouveau-fixes' of ↵Dave Airlie
git://anongit.freedesktop.org/git/nouveau/linux-2.6 into drm-fixes minor set of nouveau fixes. * 'drm-nouveau-fixes' of git://anongit.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau/bios: fix typo in error message drm/nouveau: only call ttm_agp_tt_create when __OS_HAS_AGP drm/nv50/fb: fix double free of vram mm drm/nouveau/pm: do not stop reclocking if failing to set the fan speed drm/nouveau/pm: fix a typo related to the move to the therm subdev drm/nouveau/hwmon: fix the initialization condition
2012-10-16drm/nouveau/bios: fix typo in error messageBen Skeggs
Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-10-16drm/nouveau: only call ttm_agp_tt_create when __OS_HAS_AGPMax Filippov
ttm_agp_tt_create is itself defined under CONFIG_AGP, so there's no point calling it otherwise. Signed-off-by: Max Filippov <jcmvbkbc@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-10-16drm/nv50/fb: fix double free of vram mmMarcin Slusarz
nouveau_fb_destroy already calls nouveau_mm_fini on vram mm. Signed-off-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-10-16drm/nouveau/pm: do not stop reclocking if failing to set the fan speedMartin Peres
With the introduction of fan management modes, fan may not be drivable. We should allow reclocking nonetheless. This return was stupid to begin with since it may have left the card in an intermediate state (clocks corresponding to a perflvl and voltage corresponding to another one). The reclocking code will need to be rewritten in a near-future in order to provide a better error handling. Reported-by: Marcin Slusarz <marcin.slusarz@gmail.com> Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-10-16drm/nouveau/pm: fix a typo related to the move to the therm subdevMartin Peres
Reported-by: Vekin on IRC Reported-by: Emil Velikov <emil.l.velikov@gmail.com> Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-10-16drm/nouveau/hwmon: fix the initialization conditionMartin Peres
Signed-off-by: Martin Peres <martin.peres@labri.fr> Signed-off-by: Ben Skeggs <bskeggs@redhat.com>
2012-10-16drm: fix warning on 32-bit.Dave Airlie
This cast was causing a warning on 32-bit builds. Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-10-16drm: radeon: fix printk format warningRandy Dunlap
drivers/gpu/drm/radeon/radeon_atpx_handler.c:151:3: warning: format '%lu' expects type 'long unsigned int', but argument 2 has type 'size_t' [airlied: Alex had others fixed already, except for atpx one] Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-10-16Merge branch 'drm-fixes-3.7' of git://people.freedesktop.org/~agd5f/linux ↵Dave Airlie
into drm-fixes Alex writes: "This is the first -fixes pull for 3.7. I would have preferred to have gotten it out a bit sooner, but I was on holiday last week. - Cleanup of the new 2 level page table code it get it in better shape and using less memory. - Fix some display issues related to the PLL rework. - Fix some cmpiler warnings and errors with certain config options. - Other misc bug fixes." * 'drm-fixes-3.7' of git://people.freedesktop.org/~agd5f/linux: drm/radeon: fix spelling typos in debugging output drm/radeon: Don't destroy I2C Bus Rec in radeon_ext_tmds_enc_destroy(). drm/radeon: check if pcie gen 2 is already enabled (v2) drm/radeon/cayman: set VM max pfn at MC init drm/radeon: separate pt alloc from lru add drm/radeon: don't add the IB pool to all VMs v2 drm/radeon: allocate page tables on demand v4 drm/radeon: update comments to clarify VM setup (v2) drm/radeon: allocate PPLLs from low to high drm/radeon: fix compilation with backlight disabled drm/radeon: use %zu for formatting size_t
2012-10-16Merge branch 'drm-intel-fixes' of ↵Dave Airlie
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes Daniel writes: "- some register magic to fix hsw crw (Paulo&Ben) - fix backlight destruction for cpu edp (Jani) - fix gen ch7xxx dvo ->get_hw_state - fixup the plane->pipe fixup code, the broken version massively angers the modeset sanity checks - kill pipe A quirk for i855gm, otherwise I get a black screen with the above patch - fixup for gem_get_page helper (Chris) - fixup guardband clipping w/a (Ken), without this mesa master can erronously drop vertices on snb, mesa 9.0 has the optimization reverted - another pageflip vs. modeset fix - kill bogus BUG_ON which broke ums+gem from Willy Tarreau (gasp, people are still using this!)" * 'drm-intel-fixes' of git://people.freedesktop.org/~danvet/drm-intel: drm/i915: fix non-DP-D eDP backlight cleanup and module reload drm/i915: HSW CRW stability magic drm/i915/dvo-ch7xxx: fix get_hw_state drm/i915: fixup the plane->pipe fixup code drm/i915: rip out the pipe A quirk for i855gm drm/i915: disable wc gtt pte mappings on gen2 drm/i915: fixup i915_gem_object_get_page inline helper drm/i915: Disallow preallocation of requests drm/i915: Set guardband clipping workaround bit in the right register. drm/i915: paper over a pipe-enable vs pageflip race drm/i915: remove useless BUG_ON which caused a regression in 3.5.
2012-10-15thermal, cpufreq: Fix build when CPU_FREQ_TABLE isn't configuredDavid Rientjes
Commit 023614183768 ("thermal: add generic cpufreq cooling implementation") requires cpufreq_frequency_get_table(), but that function is only defined for CONFIG_CPU_FREQ_TABLE resulting in the following build error: drivers/built-in.o: In function `cpufreq_get_max_state': drivers/thermal/cpu_cooling.c:259: undefined reference to `cpufreq_frequency_get_table' drivers/built-in.o: In function `get_cpu_frequency': drivers/thermal/cpu_cooling.c:129: undefined reference to `cpufreq_frequency_get_table' Fix it by selecting CONFIG_CPU_FREQ_TABLE for such a configuration. It turns out CONFIG_EXYNOS_THERMAL also needs CONFIG_CPU_FREQ_TABLE, so select it there as well. Signed-off-by: David Rientjes <rientjes@google.com> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-10-15net/wireless: ipw2200: Fix panic occurring in ipw_handle_promiscuous_tx()Stanislav Yakovlev
The driver does not count space of radiotap fields when allocating skb for radiotap packet. This leads to kernel panic with the following call trace: ... [67607.676067] [<c152f90f>] error_code+0x67/0x6c [67607.676067] [<c142f831>] ? skb_put+0x91/0xa0 [67607.676067] [<f8cf5e5b>] ? ipw_handle_promiscuous_tx+0x16b/0x2d0 [ipw2200] [67607.676067] [<f8cf5e5b>] ipw_handle_promiscuous_tx+0x16b/0x2d0 [ipw2200] [67607.676067] [<f8cf899b>] ipw_net_hard_start_xmit+0x8b/0x90 [ipw2200] [67607.676067] [<f8741c5a>] libipw_xmit+0x55a/0x980 [libipw] [67607.676067] [<c143d3e8>] dev_hard_start_xmit+0x218/0x4d0 ... This bug was found by VittGam. https://bugzilla.kernel.org/show_bug.cgi?id=43255 Cc: stable@kernel.org Signed-off-by: Stanislav Yakovlev <stas.yakovlev@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-15bcma: fix unregistration of coresPiotr Haber
When cores are unregistered, entries need to be removed from cores list in a safe manner. Reported-by: Stanislaw Gruszka <sgruszka@redhat.com> Reviewed-by: Arend Van Spriel <arend@broadcom.com> Signed-off-by: Piotr Haber <phaber@broadcom.com> Cc: stable@vger.kernel.org Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-15brcmfmac: fix end of loop check (signedness bug)Dan Carpenter
The problem here is that we loop until "remained_buf_len" is less than zero, but since it is unsigned, it never is. "remained_buf_len" has to be large enough to hold the value from "mgmt_ie_buf_len". That variable is type u32, but it only holds small values so I have changed to both variables to int. Also I removed the bogus initialization from "mgmt_ie_buf_len" so that GCC can detect if it is used unitialized. I moved the declaration of "remained_buf_len" closer to where it is used so it's easier to read. Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com> Reviewed-by: Hante Meuleman <meuleman@broadcom.com> Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-15brcmfmac: set dongle mode accordingly when interface upFranky Lin
The mode of WiFi dongle should be initialized in brcmf_cfg80211_up which get called when network interface is brought up. Otherwise brcmf_cfg80211_get_station would return error. Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-10-15brcmfmac: use control channel in roamed status reportingFranky Lin
Channel reported in scan results passed to cfg80211 is control channel. But chanspec is reported while notifying cfg80211 about roamed update. Cfg80211 complains because it could not find the bss in the list. Report control channel while calling cfg80211_roamed. Signed-off-by: Franky Lin <frankyl@broadcom.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v0.10.2 at 2024-10-23 04:12:16 (GMT)