| Age | Commit message (Collapse) | Author |
|---|
|
As result of patch
staging: vt6656: rxtx.c s_uGetDataDuration remove First Frag or Mid Frag dead code.
cbFrameLength, wRate, uFragIdx, cbLastFragmentSize, uMACfragNum, byFBOption are
dead variables.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
dead code.
The driver always calls s_uGetDataDuration with;
uFragIdx = 0, cbLastFragmentSize = 0 and uMACfragNum = 1
uFragIdx == (uMACfragNum-1) is always true and bLastFrag = 1.
Remove dead First Frag or Mid Frag if/else and variables.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[1] introduced down_write in zram_slot_free_notify to prevent race
between zram_slot_free_notify and zram_bvec_[read|write]. The race
could happen if somebody who has right permission to open swap device
is reading swap device while it is used by swap in parallel.
However, zram_slot_free_notify is called with holding spin_lock of
swap layer so we shouldn't avoid holing mutex. Otherwise, lockdep
warns it.
This patch adds new list to handle free slot and workqueue
so zram_slot_free_notify just registers slot index to be freed and
registers the request to workqueue. If workqueue is expired,
it holds mutex_lock so there is no problem any more.
If any I/O is issued, zram handles pending slot-free request
caused by zram_slot_free_notify right before handling issued
request because workqueue wouldn't be expired yet so zram I/O
request handling function can miss it.
Lastly, when zram is reset, flush_work could handle all of pending
free request so we shouldn't have memory leak.
NOTE: If zram_slot_free_notify's kmalloc with GFP_ATOMIC would be
failed, the slot will be freed when next write I/O write the slot.
[1] [57ab0485, zram: use zram->lock to protect zram_free_page()
in swap free notify path]
* from v2
* refactoring
* from v1
* totally redesign
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
[1] tried to fix invalid memory access on zram->disk but it didn't
fix properly because get_disk failed during module exit path.
Actually, we don't need to reset zram->disk's capacity to zero
in module exit path so that this patch introduces new argument
"reset_capacity" on zram_reset_divice and it only reset it when
reset_store is called.
[1] 6030ea9b, zram: avoid invalid memory access in zram_exit()
Cc: Nitin Gupta <ngupta@vflare.org>
Cc: Jiang Liu <jiang.liu@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Minchan Kim <minchan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Reorder the kernel doc comments for 'struct dwc2_core_params' to
match the ordering in the struct itself. Reorder the members of
'struct dwc2_qh' (and its kerneldoc comments) to minimize the
amount of structure padding.
Signed-off-by: Paul Zimmerman <paulz@synopsys.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixed a coding style issue of 80 character per line.
Signed-off-by: Andreas Werner <wernerandy@gmx.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Removed the unneeded SBE_INCLUDE_SYMBOLS #define, and the associated STATIC
#define, and replaced all occurances of STATIC with 'static'. This was in
response to sparse warnings of the form "symbol 'XYZ' was not declared. Should
it be static?".
Removed a function prototype (musycc_init_port) as adding the 'static'
declaration produced a new gcc warning. (musycc_init_port is only declared if
SBE_WAN256T3_ENABLE is set)
Signed-off-by: Shaun Laing <shaun@xresource.ca>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixed by removing trailing whitespace
Signed-off-by: Kumar Gaurav <kumargauravgupta3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Checking the return of dev_alloc_skb as stated in the following bug:
https://bugzilla.kernel.org/show_bug.cgi?id=60401
Reported-by: RUC_Soft_Sec rucsoftsec@gmail.com
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the drivers with simple, per channel programmable i/o, to use the
comedi_dio_insn_config() helper function.
All of these pass a 'mask' of '0' to comedi_dio_insn_config() this causes
the per channel mask to be used to configure the i/o direction.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert this driver to use the comedi_dio_insn_config() helper function.
Tidy up the comments to reflect the new code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
DIO subdevices always handle the INSN_CONFIG_DIO_{INPUT,OUTPUT} instructions
to configure the DIO channels. They also always handle the INSN_CONFIG_DIO_QUERY
instruction to query the configuration of a DIO channel.
Introduce a helper function to handle the (*insn_config) boilerplate for
comedi DIO subdevices. This function has the same paramters as (*insn_config)
functions with an additional parameter to allow the caller to pass a 'mask'
value for grouped DIO channels.
This function returns:
0 if the instruction was successful but requires additional handling by
the caller (INSN_CONFIG_DIO_{INPUT,OUTPUT}
insn->n if the instruction was handled (INSN_CONFIG_DIO_QUERY)
-EINVAL for all unhandled instructions
The caller is responsible for actually configuring the hardware based on
the configuration (s->io_bits).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 42ef678bef336a83fd0ae0b03a56c0a93665a18b.
It's incorrect as well... time for more coffee...
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This reverts commit 4f76463d3b8f8cc0cac5bb292ec766848f3f4fa1.
I applied an incorrect version here as well :(
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the drivers with complex, port programmable i/o, to use the
comedi_dio_insn_config() helper function.
All of these drivers have some sort of 'port' programmable i/o where multiple
i/o channels are configured as a group. The 'mask' associated with the group
is passed to comedi_dio_insn_config() so that all the channels are configured.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
To get the name of a file from a pathname we may use kbasename() helper.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
cases"
This reverts commit f21c53945cb95f66faa9636af5f23cb00ba73019.
I applied the wrong patch :(
Cc: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
zcache is obsolete and not used anymore, Bob Liu has rewritten it and is
submitting it for inclusion through the main -mm tree, as it should have
been done in the first place...
Cc: Bob Liu <lliubbo@gmail.com>
Cc: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
Cc: Kyungmin Park <kmpark@infradead.org>
Cc: Wanpeng Li <liwanp@linux.vnet.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert the drivers with complex, port programmable i/o, to use the
comedi_dio_insn_config() helper function.
All of these drivers have some sort of 'port' programmable i/o where multiple
i/o channels are configured as a group. The 'mask' associated with the group
is passed to comedi_dio_insn_config() so that all the channels are configured.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Convert this driver to use the comedi_dio_insn_config() helper function.
Tidy up the comments to reflect the new code.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
DIO subdevices always handle the INSN_CONFIG_DIO_{INPUT,OUTPUT} instructions
to configure the dio channels. They also always handle the INSN_CONFIG_DIO_QUERY
instruction to query the configuration of a dio channel.
Introduce a helper function to handle the (*insn_config) boilerplate for
comedi DIO subdevices. This function has the same parameters as (*insn_config)
functions with an additional parameter to allow the caller to pass a 'mask'
value for grouped dio channels.
This function returns:
0 if the instruction was successful but requires additional handling by
the caller (INSN_CONFIG_DIO_{INPUT,OUTPUT}
insn->n if the instruction was handled (INSN_CONFIG_DIO_QUERY)
-EINVAL for all unhandled instructions
The caller is responsible for actually configuring the hardware based on
the configuration (s->io_bits).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace structures with struct ieee80211_cts data
typedef struct tagSCTSData include extra packing wReserved
not in struct ieee80211_cts
This is corrected by adding reserved2 to the structures.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Replace structures with struct ieee80211_rts data.
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
memset to 0 structure _USB_SEND_CONTEXT pContext->Data to its
size of MAX_TOTAL_SIZE_WITH_ALL_HEADERS as defined
in device.h
This removes the need for memset in the TX path.
It also allows the removal of dead structure
TX_BUFFER_CONTAINER BufferHeader;
Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fix a bug where we were not returning correct hub status
for 8th port.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Make sure that we reset port configuration no. when PD departs.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Deleted an extern function that wasn't used in this driver.
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixed some coding style issues.
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixed some coding style issues
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Prototype of a function added to the header to avoid the use of extern.
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
White space deleted before a semicolon.
Signed-off-by: Iker Pedrosa <ikerpedrosam@gmail.com>
Acked-by: Pavel Machek <pavel@ucw.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Fixed issue by removing Space before semicolon
Signed-off-by: Kumar Gaurav <kumargauravgupta3@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Andres Salomon and Chris Ball are not longer at OLPC.
Daniel Drake is the new OLPC go-to guy. And I wanna
also be CC'd on DCON and other OLPC patches.
Signed-off-by: Jens Frederich <jfrederich@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes kernel crash issue, when we receive URB request
after de-enumerating device.
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fix following issues reported by Dan:-
1) There is no check limiting the size to 32 and it could be up to
253 bytes.
2) Use defines instead of magic numbers.
3) The oz_farewell struct is supposed to be a variable length struct
but the variable part is put in the middle. It doesn't make any
sense to put the length of the variable size array after then end
of the array because we can never find it again! Put the
variable size array at the end. Make it a zero length array.
u8 len;
u8 report[0];
4) In oz_add_farewell() we do this:
f = kmalloc(sizeof(struct oz_farewell) + len - 1, GFP_ATOMIC);
The "- 1" refers to sizeof(f->report) but because it was a magic
number then it was missed when the sizeof(f->report) changed.
5) In [patch 6/6] we set the ->len member. But because it is at the
end of a variable length array with no limit check the remote
attacker can just rewrite it using the memcpy() on the next line.
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This patch fixes following build warning.
drivers/built-in.o: In function `oz_hcd_heartbeat':
>> (.text+0x30aadd): undefined reference to `__divdi3'
drivers/built-in.o: In function `oz_hcd_heartbeat':
>> (.text+0x30ac85): undefined reference to `__divdi3'
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Rupesh Gujare <rupesh.gujare@atmel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
We want the staging fixes in here as well.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is three bug fixes: An fnic warning caused by sleeping under a
lock, a major regression with our updated WRITE SAME/UNMAP logic which
caused tons of USB devices (and one RAID card) to cease to function
and a megaraid_sas firmware initialisation problem which causes kdump
failures"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] Don't attempt to send extended INQUIRY command if skip_vpd_pages is set
[SCSI] fnic: BUG: sleeping function called from invalid context during probe
[SCSI] megaraid_sas: megaraid_sas driver init fails in kdump kernel
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux
Pull i2c fixes from Wolfram Sang:
"Some driver bugfixes for the I2C subsystem"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mv64xxx: Document the newly introduced allwinner compatible
i2c: Fix Kontron PLD prescaler calculation
i2c: i2c-mxs: Use DMA mode even for small transfers
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver fixes from Greg KH:
"Here are 3 small fixes for staging/IIO drivers for 3.11-rc5. Nothing
huge, two IIO driver fixes, and a zcache fix. All of these have been
in linux-next for a while"
* tag 'staging-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: zcache: fix "zcache=" kernel parameter
iio: ti_am335x_adc: Fix wrong samples received on 1st read
iio:trigger: Fix use_count race condition
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB fixes from Greg KH:
"Here are 3 small USB fixes for 3.11-rc5.
One is a fix that the ChromeOS developers ran into on some Intel
hardware, one is a build fix, and the last is a MAINTAINERS update to
help people figure out where to send USB network driver patches.
All of these have been in linux-next for a while"
* tag 'usb-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
MAINTAINERS: Add separate section for USB NETWORKING DRIVERS
usb: xhci: add missing dma-mapping.h includes
usb: core: don't try to reset_device() a port that got just disconnected
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull ACPI and power management fixes from Rafael Wysocki:
- ACPI-based memory hotplug stopped working after a recent change,
because it's not possible to associate sufficiently many "physical"
devices with one ACPI device object due to an artificial limit. Fix
from Rafael J Wysocki removes that limit and makes memory hotplug
work again.
- A change made in 3.9 uncovered a bug in the ACPI processor driver
preventing NUMA nodes from being put offline due to an ordering
issue. Fix from Yasuaki Ishimatsu changes the ordering to make
things work again.
- One of the recent ACPI video commits (that hasn't been reverted so
far) uncovered a bug in the code handling quirky BIOSes that caused
some Asus machines to boot with backlight completely off which made
it quite difficult to use them afterward. Fix from Felipe Contreras
improves the quirk to cover this particular case correctly.
- A cpufreq user space interface change made in 3.10 inadvertently
renamed the ignore_nice_load sysfs attribute to ignore_nice which
resulted in some confusion. Fix from Viresh Kumar changes the name
back to ignore_nice_load.
- An initialization ordering change made in 3.9 broke cpufreq on
loongson2 boards. Fix from Aaro Koskinen restores the correct
initialization ordering there.
- Fix breakage resulting from a mistake made in 3.9 and causing the
detection of some graphics adapters (that were detected correctly
before) to fail. There are two objects representing the same PCIe
port in the affected systems' ACPI tables and both appear as
"enabled" and we are expected to guess which one to use. We used to
choose the right one before by pure luck, but when we tried to
address another similar corner case, the luck went away. This time
we try to make our guessing a bit more educated which is reported to
work on those systems.
- The /proc/acpi/wakeup interface code is missing some locking which
may lead to breakage if that file is written or read during hotplug
of wakeup devices. That should be rare but still possible, so it's
better to start using the appropriate locking there.
* tag 'pm+acpi-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: Try harder to resolve _ADR collisions for bridges
cpufreq: rename ignore_nice as ignore_nice_load
cpufreq: loongson2: fix regression related to clock management
ACPI / processor: move try_offline_node() after acpi_unmap_lsapic()
ACPI: Drop physical_node_id_bitmap from struct acpi_device
ACPI / PM: Walk physical_node_list under physical_node_lock
ACPI / video: improve quirk check in acpi_video_bqc_quirk()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fix from Guenter Roeck:
"Fix bug in adt7470 driver which causes it to fail writing fan speed
limits"
* tag 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (adt7470) Fix incorrect return code check
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media
Pull media fixes from Mauro Carvalho Chehab:
"Some driver fixes (em28xx, coda, usbtv, s5p, hdpvr and ml86v7667) and
a fix for media DocBook"
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
[media] em28xx: fix assignment of the eeprom data
[media] hdpvr: fix iteration over uninitialized lists in hdpvr_probe()
[media] usbtv: fix dependency
[media] usbtv: Throw corrupted frames away
[media] usbtv: Fix deinterlacing
[media] v4l2: added missing mutex.h include to v4l2-ctrls.h
[media] DocBook: upgrade media_api DocBook version to 4.2
[media] ml86v7667: fix compile warning: 'ret' set but not used
[media] s5p-g2d: Fix registration failure
[media] media: coda: Fix DT driver data pointer for i.MX27
[media] s5p-mfc: Fix input/output format reporting
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid
Pull HID fix from Jiri Kosina:
"Revert of a patch which breaks enumeration workaround in
hid-logitech-dj"
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid:
Revert "HID: hid-logitech-dj: querying_devices was never set"
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux
Pull fbdev fixes from Tomi Valkeinen:
- omapdss: compilation fix and DVI fix for PandaBoard
- mxsfb: fix colors when using 18bit LCD bus
* tag 'fbdev-fixes-3.11-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux:
ARM: OMAP: dss-common: fix Panda's DVI DDC channel
video: mxsfb: fix color settings for 18bit data bus and 32bpp
OMAPDSS: analog-tv-connector: compile fix
|
|
Pull drm fixes from Dave Airlie:
"Mostly radeon, more fixes for dynamic power management which is is off
by default for this release anyways, but there are a large number of
testers, so I'd like to keep merging the fixes.
Otherwise, radeon UVD fixes affecting suspend/resume regressions, i915
regression fixes, one for your mac mini, ast, mgag200, cirrus ttm fix
and one regression fix in the core"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (25 commits)
drm: Don't pass negative delta to ktime_sub_ns()
drm/radeon: make missing smc ucode non-fatal
drm/radeon/dpm: require rlc for dpm
drm/radeon/cik: use a mutex to properly lock srbm instanced registers
drm/radeon: remove unnecessary unpin
drm/radeon: add more UVD CS checking
drm/radeon: stop sending invalid UVD destroy msg
drm/radeon: only save UVD bo when we have open handles
drm/radeon: always program the MC on startup
drm/radeon: fix audio dto calculation on DCE3+ (v3)
drm/radeon/dpm: disable sclk ss on rv6xx
drm/radeon: fix halting UVD
drm/radeon/dpm: adjust power state properly for UVD on SI
drm/radeon/dpm: fix spread spectrum setup (v2)
drm/radeon/dpm: adjust thermal protection requirements
drm/radeon: select audio dto based on encoder id for DCE3
drm/radeon: properly handle pm on gpu reset
drm/i915: do not disable backlight on vgaswitcheroo switch off
drm/i915: Don't call encoder's get_config unless encoder is active
drm/i915: avoid brightness overflow when doing scale
...
|
|
This reverts commit 407a2c2a4d85100c8c67953e4bac2f4a6c942335.
Explanation provided by Benjamin Tissoires:
Commit "HID: hid-logitech-dj, querying_devices was never set" activate
a flag which guarantees that we do not ask the receiver for too many
enumeration. When the flag is set, each following enumeration call is
discarded (the usb request is not forwarded to the receiver). The flag
is then released when the driver receive a pairing information event,
which normally follows the enumeration request.
However, the USB3 bug makes the driver think the enumeration request
has been forwarded to the receiver. However, it is actually not the
case because the USB stack returns -EPIPE. So, when a new unknown
device appears, the workaround consisting in asking for a new
enumeration is not working anymore: this new enumeration is discarded
because of the flag, which is never reset.
A solution could be to trigger a timeout before releasing it, but for
now, let's just revert the patch.
Reported-by: Benjamin Tissoires <benjamin.tissoires@gmail.com>
Tested-by: Sune Mølgaard <sune@molgaard.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
|
|
git://people.freedesktop.org/~danvet/drm-intel into drm-fixes
Daniel writes:
A few bugfixes for serious stuff and regressions. Highlight is the
reinstated hack to keep the i915 backlight on when running on an optimus
machine, this prevents black screens especially with some radeon muxed
platforms. And the patch to quiet dmesg on Linus' old mac mini ;-)
* tag 'drm-intel-fixes-2013-08-08' of git://people.freedesktop.org/~danvet/drm-intel:
drm/i915: do not disable backlight on vgaswitcheroo switch off
drm/i915: Don't call encoder's get_config unless encoder is active
drm/i915: avoid brightness overflow when doing scale
drm/i915: update last_vblank when disabling the power well
drm/i915: fix gen4 digital port hotplug definitions
|
|
In adt7470_write_word_data(), which writes two bytes using
i2c_smbus_write_byte_data(), the return codes are incorrectly AND-ed
together when they should be OR-ed together.
The return code of i2c_smbus_write_byte_data() is zero for success.
The upshot is only the first byte was ever written to the hardware.
The 2nd byte was never written out.
I noticed that trying to set the fan speed limits was not working
correctly on my system. Setting the fan speed limits is the only
code that uses adt7470_write_word_data(). After making the change
the limit settings work and the alarms work also.
Signed-off-by: Curt Brune <curt@cumulusnetworks.com>
Cc: stable@vger.kernel.org
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
