summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-11-08drm/radeon/si: add some missing regs to the VM reg checkerAlex Deucher
This register is needed for streamout to work properly. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
2012-11-08drm/radeon/cayman: add some missing regs to the VM reg checkerAlex Deucher
These regs were being wronly rejected leading to rendering issues. fixes: https://bugs.freedesktop.org/show_bug.cgi?id=56876 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
2012-11-08net: usb: cdc_eem: Fix rx skb allocation for 802.1Q VLANsIan Coolidge
cdc_eem frames might need to contain 802.1Q VLAN Ethernet frames. URB/skb sizing from usbnet will default to the hard_mtu, so account for the VLAN header by expanding that via hard_header_len Signed-off-by: Ian Coolidge <iancoolidge@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08usb: gadget: g_ether: fix frame size check for 802.1QIan Coolidge
Checking skb->len against ETH_FRAME_LEN assumes a 1514 ethernet frame size. With an 802.1Q VLAN header, ethernet frame length can now be 1518. Validate frame length against that. Signed-off-by: Ian Coolidge <iancoolidge@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-08cxgb4: Fix initialization of SGE_CONTROL registerVipul Pandya
INGPADBOUNDARY_MASK is already shifted. No need to shift it again. On reloading a driver it was resulting in a bad SGE FL MTU sizes [1536, 9088] error. This only causes an issue on systems that have L1 cache size of 32B, 128B, 512B, 2048B or 4096B. Signed-off-by: Jay Hernandez <jay@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07isdn: Make CONFIG_ISDN depend on CONFIG_NETDEVICESLee Jones
It doesn't make much sense to enable ISDN services if you don't intend to connect to a network. Therefore insisting that ISDN depends on NETDEVICES seems logical. We can then remove any guards mentioning NETDEVICES inside all subordinate drivers. This also has the nice side-effect of fixing the warning below when ISDN_I4L && !CONFIG_NETDEVICES at compile time. This patch fixes: drivers/isdn/i4l/isdn_common.c: In function ‘isdn_ioctl’: drivers/isdn/i4l/isdn_common.c:1278:8: warning: unused variable ‘s’ [-Wunused-variable] Cc: Karsten Keil <isdn@linux-pingi.de> Cc: netdev@vger.kernel.org Signed-off-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07cxgb4: Initialize data structures before using.Vipul Pandya
We should not assume reserve fields to be don't cares as fields may change. Clearing data structures before using. Signed-off-by: Jay Hernandez <jay@chelsio.com> Signed-off-by: Vipul Pandya <vipul@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07mmc: sdhci-s3c: fix the card detection in runtime-pmSeungwon Jeon
If host clock is disabled, host cannot detect a card in case of using CD internal for detection. Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: sdhci-s3c: use clk_prepare_enable and clk_disable_unprepareThomas Abraham
Convert clk_enable/clk_disable to clk_prepare_enable/clk_disable_unprepare calls as required by common clock framework. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: dw_mmc: constify dw_mci_idmac_ops in exynos back-endArnd Bergmann
The of_device_id match data is now marked as const and must not be modified. This changes the dw_mmc to mark all pointers passing the dw_mci_drv_data or dw_mci_dma_ops structures as const, and also marks the static definitions as const. drivers/mmc/host/dw_mmc-exynos.c: In function 'dw_mci_exynos_probe': drivers/mmc/host/dw_mmc-exynos.c:234:11: warning: assignment discards 'const' qualifier from pointer target type [enabled by default] Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Abraham <thomas.abraham@linaro.org> Cc: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: dw_mmc: fix modular build for exynos back-endArnd Bergmann
The MODULE_DEVICE_TABLE entry for dw_mci_exynos_match was incorrectly copied from the platform back-end, which causes this error when building the driver as a loadable module: drivers/mmc/host/dw_mmc-exynos.c: At top level: drivers/mmc/host/dw_mmc-exynos.c:226:34: error: '__mod_of_device_table' aliased to undefined symbol 'dw_mci_pltfm_match' This patch fixes the problem by just using the correct string. Signed-off-by: Arnd Bergmann <arnd@arndb.de> Cc: Thomas Abraham <thomas.abraham@linaro.org> Cc: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: sdhci: fix NULL dereference in sdhci_request() tuningChris Ball
Commit 473b095a72a9 ("mmc: sdhci: fix incorrect command used in tuning") introduced a NULL dereference at resume-time if an SD 3.0 host controller raises the SDHCI_NEEDS_TUNING flag while no card is inserted. Seen on an OLPC XO-4 with sdhci-pxav3, but presumably affects other controllers too. Signed-off-by: Chris Ball <cjb@laptop.org> Cc: stable <stable@vger.kernel.org> [3.3+]
2012-11-07mmc: sdhci: fix IS_ERR() checking of regulator_get()Kevin Liu
There are two problems here: The check for vmmc was printing an unnecessary pr_info() when host->vmmc is NULL. The intent of the check for vqmmc was to only remove UHS if we have a regulator that doesn't support the required voltage, but since IS_ERR() doesn't catch NULL, we were actually removing UHS modes if vqmmc isn't present at all -- since it isn't present for most users, this breaks UHS for them. This patch fixes that UHS regression in 3.7-rc1. Signed-off-by: Kevin Liu <kliu5@marvell.com> Signed-off-by: Bin Wang <binw@marvell.com> Reviewed-by: Philip Rakity <prakity@marvell.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: fix sdhci-dove probe/removalRussell King - ARM Linux
1. Never ever publish a device in the system before it has been setup to a usable state. 2. Unregister the device _BEFORE_ taking away any resources it may be using. 3. Don't check clks against NULL. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Tested-by: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: sh_mmcif: fix use after freeGuennadi Liakhovetski
A recent commit "mmc: sh_mmcif: fix clock management" has introduced a use after free bug in sh_mmcif.c: in sh_mmcif_remove() the call to mmc_free_host() frees private driver data, therefore using it afterwards is a bug. Revert that hunk. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Cc: stable@vger.kernel.org [3.6] Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: sdhci-pci: fix 'Invalid iomem size' error message conditionAdrian Hunter
The SDHCI standard defines a 256 byte register set but a device that specifies a larger iomem region is not an error. Alter the message condition accordingly. Signed-off-by: Adrian Hunter <adrian.hunter@intel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: mxcmmc: Fix MODULE_ALIASFabio Estevam
The correct name for the driver is "mxc-mmc". Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com> Acked-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: omap_hsmmc: fix NULL pointer dereference for dt bootBalaji T K
dev->platform_data is NULL in case of device tree boot, instead use the saved version in struct omap_hsmmc_host. Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: omap_hsmmc: fix host reference after mmc_free_hostBalaji T K
struct omap_hsmmc_host *host should not be accessed after mmc_free_host(). Reorder mmc_free_host() after iounmap(host->base). Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: dw_mmc: fix multiple drv_data NULL dereferencesJames Hogan
800d78bfccb3d ("mmc: dw_mmc: add support for implementation specific callbacks") -- merged in v3.7-rc1 -- introduced multiple NULL pointer dereferences when the default dw_mci_pltfm_probe() is used, as it sets host->drv_data to NULL, and that's only checked against NULL in 1 out of the 7 cases where it is dereferenced. Signed-off-by: James Hogan <james.hogan@imgtec.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: dw_mmc: enable controller interrupt before calling mmc_start_hostYuvaraj CD
As mmc_start_host is getting called before enabling the dw_mmc controller interrupt, there is a problem of missing the SDMMC_INT_CMD_DONE for the very first command sent by the sdio_reset. This problem occurs only when we disable MMC debugging i.e, MMC_DEBUG=n. This patch enables the dw_mmc controller interrupt before mmc_start_host. Signed-off-by: Yuvaraj CD <yuvaraj.cd@samsung.com> Reviewed-by: Girish K S <girish.shivananjappa@linaro.org> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: sdhci-of-esdhc: disable CMD23 for some Freescale SoCsJerry Huang
CMD23 causes lots of errors in kernel on some freescale SoCs (P1020, P1021, P1022, P1024, P1025 and P4080) when MMC card used, which is because these controllers does not support CMD23, even on the SoCs which declares CMD23 is supported. Therefore, we'll not use CMD23. Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> Signed-off-by: Shaohui Xie <Shaohui.Xie@freescale.com> Acked-by: Anton Vorontsov <cbouatmailru@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07mmc: dw_mmc: remove _dev_info compile warningSeungwon Jeon
This patch removes the following warning. drivers/mmc/host/dw_mmc.c:1976: warning: passing argument 1 of '_dev_info' from incompatible pointer type Signed-off-by: Seungwon Jeon <tgih.jun@samsung.com> Acked-by: Will Newton <will.newton@imgtec.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-11-07xen/generic: Disable fallback build on ARM.Konrad Rzeszutek Wilk
As there is no need for it (the fallback code is for older hypervisors and they only run under x86), and also b/c we get: drivers/xen/fallback.c: In function 'xen_event_channel_op_compat': drivers/xen/fallback.c:10:19: error: storage size of 'op' isn't known drivers/xen/fallback.c:15:2: error: implicit declaration of function '_hypercall1' [-Werror=implicit-function-declaration] drivers/xen/fallback.c:15:19: error: expected expression before 'int' drivers/xen/fallback.c:18:7: error: 'EVTCHNOP_close' undeclared (first use in this function) drivers/xen/fallback.c:18:7: note: each undeclared identifier is reported only once for each function it appears in .. and more [v1: Moved the enablement to be covered by CONFIG_X86 per Ian's suggestion] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-07xen/events: fix RCU warning, or Call idle notifier after irq_enter()Mojiong Qiu
exit_idle() should be called after irq_enter(), otherwise it throws: [ INFO: suspicious RCU usage. ] 3.6.5 #1 Not tainted ------------------------------- include/linux/rcupdate.h:725 rcu_read_lock() used illegally while idle! other info that might help us debug this: RCU used illegally from idle CPU! rcu_scheduler_active = 1, debug_locks = 1 RCU used illegally from extended quiescent state! 1 lock held by swapper/0/0: #0: (rcu_read_lock){......}, at: [<ffffffff810e9fe0>] __atomic_notifier_call_chain+0x0/0x140 stack backtrace: Pid: 0, comm: swapper/0 Not tainted 3.6.5 #1 Call Trace: <IRQ> [<ffffffff811259a2>] lockdep_rcu_suspicious+0xe2/0x130 [<ffffffff810ea10c>] __atomic_notifier_call_chain+0x12c/0x140 [<ffffffff810e9fe0>] ? atomic_notifier_chain_unregister+0x90/0x90 [<ffffffff811216cd>] ? trace_hardirqs_off+0xd/0x10 [<ffffffff810ea136>] atomic_notifier_call_chain+0x16/0x20 [<ffffffff810777c3>] exit_idle+0x43/0x50 [<ffffffff81568865>] xen_evtchn_do_upcall+0x25/0x50 [<ffffffff81aa690e>] xen_do_hypervisor_callback+0x1e/0x30 <EOI> [<ffffffff810013aa>] ? hypercall_page+0x3aa/0x1000 [<ffffffff810013aa>] ? hypercall_page+0x3aa/0x1000 [<ffffffff81061540>] ? xen_safe_halt+0x10/0x20 [<ffffffff81075cfa>] ? default_idle+0xba/0x570 [<ffffffff810778af>] ? cpu_idle+0xdf/0x140 [<ffffffff81a4d881>] ? rest_init+0x135/0x144 [<ffffffff81a4d74c>] ? csum_partial_copy_generic+0x16c/0x16c [<ffffffff82520c45>] ? start_kernel+0x3db/0x3e8 [<ffffffff8252066a>] ? repair_env_string+0x5a/0x5a [<ffffffff82520356>] ? x86_64_start_reservations+0x131/0x135 [<ffffffff82524aca>] ? xen_start_kernel+0x465/0x46 Git commit 98ad1cc14a5c4fd658f9d72c6ba5c86dfd3ce0d5 Author: Frederic Weisbecker <fweisbec@gmail.com> Date: Fri Oct 7 18:22:09 2011 +0200 x86: Call idle notifier after irq_enter() did this, but it missed the Xen code. Signed-off-by: Mojiong Qiu <mjqiu@tencent.com> Cc: stable@vger.kernel.org # from 3.3 and newer. Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-07drm/radeon/dce3: switch back to old pll allocation order for discreteAlex Deucher
The order shouldn't matter, but this seems to cause regressions for certain specific cases. This should fix it for now. We probably need to investigate a proper fix in the next development cycle. Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Cc: Andy Furniss <andyqos@ukfsn.org>
2012-11-07Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging Pull hwmon fixes from Jean Delvare. * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: Fix chip feature table headers hwmon: (w83627ehf) Force initial bank selection
2012-11-07drm/radeon: fix typo in evergreen_mc_resume()Alex Deucher
Add missing index that may have led us to enabling more crtcs than necessary. May also fix: https://bugs.freedesktop.org/show_bug.cgi?id=56139 Signed-off-by: Alex Deucher <alexander.deucher@amd.com> Reviewed-by: Michel Dänzer <michel.daenzer@amd.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-07drm: set dev_mapping before calling drm_open_helperIlija Hadzic
Some drivers (specifically vmwgfx) look at dev_mapping in their open hook, so we have to set dev->dev_mapping earlier in the process. Reference: http://lists.freedesktop.org/archives/dri-devel/2012-October/029420.html Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Reported-by: Thomas Hellstrom <thellstrom@vmware.com> Cc: stable@vger.kernel.org Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-07drm: restore open_count if drm_setup failsIlija Hadzic
If drm_setup (called at first open) fails, the whole open call has failed, so we should not keep the open_count incremented. Signed-off-by: Ilija Hadzic <ihadzic@research.bell-labs.com> Cc: stable@vger.kernel.org Reviewed-by: Thomas Hellstrom <thellstrom@vmware.com> Signed-off-by: Dave Airlie <airlied@redhat.com>
2012-11-06sparc: Allow OF_GPIO on sparc.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-06s390/cio: fix length calculation in idset.cSebastian Ott
bitmap_or uses the number of bits as its length parameter and not the number of words necessary to store those bits. This fixes a regression introduced by: aa92b33 s390/cio: use generic bitmap functions Reported-by: Christian Ehrhardt <ehrhardt@linux.vnet.ibm.com> Acked-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com> Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-06s390: Move css limits from drivers/s390/cio/ to include/asm/.Cornelia Huck
There's no need to keep __MAX_SUBCHANNEL and __MAX_SSID private to the common I/O layer when __MAX_CSSID is usable by everybody. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
2012-11-06pinctrl: samsung and exynos need to depend on OF && GPIOLIBAxel Lin
This patch fixes below build error when !CONFIG_OF_GPIO. CC drivers/pinctrl/pinctrl-samsung.o drivers/pinctrl/pinctrl-samsung.c: In function 'samsung_pinctrl_parse_dt_pins': drivers/pinctrl/pinctrl-samsung.c:557:19: warning: unused variable 'prop' [-Wunused-variable] drivers/pinctrl/pinctrl-samsung.c: In function 'samsung_gpiolib_register': drivers/pinctrl/pinctrl-samsung.c:797:5: error: 'struct gpio_chip' has no member named 'of_node' make[2]: *** [drivers/pinctrl/pinctrl-samsung.o] Error 1 make[1]: *** [drivers/pinctrl] Error 2 make: *** [drivers] Error 2 The samsung pinctrl driver supports only device tree enabled platforms. Thus make PINCTRL_SAMSUNG depend on OF && GPIOLIB. The reason to depend on GPIOLIB is CONFIG_OF_GPIO only available when GPIOLIB is selected. Since PINCTRL_EXYNOS4 select PINCTRL_SAMSUNG, thus also make PINCTRL_EXYNOS4 depend on OF && GPIOLIB. Signed-off-by: Axel Lin <axel.lin@ingics.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05PCI/portdrv: Don't create hotplug slots unless port supports hotplugTaku Izumi
Commit 2dcfaf85 mistakenly dropped the "flags & PCI_EXP_FLAGS_SLOT" test, so now we create hotplug slots even for PCIe port devices that don't support hotplug. This patch fixes this problem. [bhelgaas: changelog] Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Yinghai Lu <yinghai@kernel.org> Reviewed-by: Jiang Liu <jiang.liu@huawei.com>
2012-11-05hwmon: Fix chip feature table headersJean Delvare
These got broken by recent patches fixing checkpatch warnings in these drivers. The trick is that the patches themselves looked good, but the source files after applying them do not. That's why I am not a big fan of using tabs inside comments. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Guenter Roeck <linux@roeck-us.net>
2012-11-05hwmon: (w83627ehf) Force initial bank selectionJean Delvare
Don't assume bank 0 is selected at device probe time. This may not be the case. Force bank selection at first register access to guarantee that we read the right registers upon driver loading. Signed-off-by: Jean Delvare <khali@linux-fr.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Cc: stable@vger.kernel.org
2012-11-05PCI/PM: Fix proc config reg access for D3cold and bridge suspendingHuang Ying
In https://bugzilla.kernel.org/show_bug.cgi?id=48981 Peter reported that /proc/bus/pci/??/??.? does not work for 3.6. This is because the device configuration space registers are not accessible if the corresponding parent bridge is suspended or the device is put into D3cold state. This is the same as /sys/bus/pci/devices/0000:??:??.?/config access issue. So the function used to solve sysfs issue is used to solve this issue. This patch moves pci_config_pm_runtime_get()/_put() from pci/pci-sysfs.c to pci/pci.c and makes them extern so they can be used by both the sysfs and proc paths. [bhelgaas: changelog, references, reporters] Reference: https://bugzilla.kernel.org/show_bug.cgi?id=48981 Reference: https://bugzilla.kernel.org/show_bug.cgi?id=49031 Reported-by: Forrest Loomis <cybercyst@gmail.com> Reported-by: Peter <lekensteyn@gmail.com> Reported-by: Micael Dias <kam1kaz3@gmail.com> Signed-off-by: Huang Ying <ying.huang@intel.com> Signed-off-by: Bjorn Helgaas <bhelgaas@google.com> Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> CC: stable@vger.kernel.org # v3.6+
2012-11-05pinctrl: SPEAr1340: Add clcd sleep mode pin configurationVipul Kumar Samar
CLCD pads must be configured differently for sleep mode. This patch adds support for clcd_sleep_pingroup. Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05pinctrl: SPEAr1340: Make DDR reset & clock pads as gpioDeepak Sikri
Some gpio pins are used to control DDR reset and clock enable while the system is moved into Low power. This patch adds in the corresponding GPIO entries in the pads_as_gpio_pins to ensure the pads are available as gpio's. Signed-off-by: Deepak Sikri <deepak.sikri@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05pinctrl: SPEAr1310: add register entries for enabling pad directionShiraz Hashim
Pad direction must also be updated for SPEAr1310, while setting pads values. This patch adds support for that. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05pinctrl: SPEAr1310: Separate out pci pins from pcie_sata pin groupVipul Kumar Samar
SPEAr1310 has separate PCI and PCIe implementations which are not muxed with each other. Presently they have been implemented as muxed together with SATA and are represented wrongly in the software. In reality only PCIe and SATA implementations are muxed with each other. This patch separates out pci pins creating a new pingroup and function for pci. Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05pinctrl: SPEAr1310: Fix value of PERIP_CFG reigster and MCIF_SEL_SHIFTVipul Kumar Samar
This patch fixes two macros: PERIP_CFG registers offset and MCIF selection shift. Signed-off-by: Vipul Kumar Samar <vipulkumar.samar@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05pinctrl: SPEAr1310: fix clcd high resolution pin group nameShiraz Hashim
All group names in SPEAr pinctrl have "_grp" at the end of their name. Do the same for clcd_high_res_grp. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05pinctrl: SPEAr320: Correct pad mux entries for rmii/smiiDeepak Sikri
pin entries of rmii and smii are interchanged by mistake. Fix it. Signed-off-by: Deepak Sikri <deepak.sikri@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05pinctrl: SPEAr3xx: correct register space to configure pwmShiraz Hashim
To have pwm on pad no. 34 we also need to select between pwm and SD_LED functions. Add this to pwm pin mux register configuration. Signed-off-by: Shiraz Hashim <shiraz.hashim@st.com> Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Reviewed-by: Vipin Kumar <vipin.kumar@st.com> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-05pinctrl: SPEAr: Don't update all non muxreg bits on pinctrl_disableViresh Kumar
Not all bits of a register are used for pinctrl in SPEAr. So only update bits relevant to pinctrl using muxreg->mask. Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
2012-11-04xen/hypercall: fix hypercall fallback code for very old hypervisorsJan Beulich
While copying the argument structures in HYPERVISOR_event_channel_op() and HYPERVISOR_physdev_op() into the local variable is sufficiently safe even if the actual structure is smaller than the container one, copying back eventual output values the same way isn't: This may collide with on-stack variables (particularly "rc") which may change between the first and second memcpy() (i.e. the second memcpy() could discard that change). Move the fallback code into out-of-line functions, and handle all of the operations known by this old a hypervisor individually: Some don't require copying back anything at all, and for the rest use the individual argument structures' sizes rather than the container's. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Jan Beulich <jbeulich@suse.com> [v2: Reduce #define/#undef usage in HYPERVISOR_physdev_op_compat().] [v3: Fix compile errors when modules use said hypercalls] [v4: Add xen_ prefix to the HYPERCALL_..] [v5: Alter the name and only EXPORT_SYMBOL_GPL one of them] Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-11-03Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux Pull thermal management & ACPI update from Zhang Rui, Ho humm. Normally these things go through Len. But it's just three small fixes, I guess I can pull directly too. * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/rzhang/linux: exynos4_tmu_driver_ids should be exynos_tmu_driver_ids. ACPI video: Ignore errors after _DOD evaluation. thermal: solve compilation errors in rcar_thermal
2012-11-03Merge branch 'i2c-embedded/for-current' of ↵Linus Torvalds
git://git.pengutronix.de/git/wsa/linux Pull i2c embedded fixes from Wolfram Sang: "Two patches are usual stuff. The bigger patch is needed to correct a wrong decision made in this merge window. We hoped to get the PIOQUEUE mode in the mxs driver working with DMA, but it turned out to be too broken (leading to data loss), so we now think it is best to remove it entirely and work only with DMA now. The patch should be in 3.7. IMO, so users never get the chance to use both modes in parallel." * 'i2c-embedded/for-current' of git://git.pengutronix.de/git/wsa/linux: i2c: tegra: set irq name as device name i2c-nomadik: Fixup clock handling i2c: mxs: remove broken PIOQUEUE support
generated by cgit v0.10.2 at 2024-10-06 10:44:59 (GMT)