summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-04-28sfc: Extend the legacy interrupt workaroundsSteve Hodgson
Siena has two problems with legacy interrupts: 1. There is no synchronisation between the ISR read completion, and the interrupt deassert message. 2. A downstream read at the "wrong" moment can return 0, and suppress generating the next interrupt. Falcon should suffer from both of these, and it appears it does. Enable EFX_WORKAROUND_15783 on Falcon as well. Also, when we see queues == 0, ensure we always schedule or rearm every event queue. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Reconfigure the XAUI serdes after an EM resetSteve Hodgson
Fix a regression introduced in d3245b28ef2a45ec4e115062a38100bd06229289 "sfc: Refactor link configuration". Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Stop masking out XGMII faults over reconfiguresSteve Hodgson
The aim of this code was to avoid a spurious XGMII fault over a MAC reconfigure. It's less relevant now that the PHY reconfigure isn't called from the MAC reconfigure. After applying this patch, our link stress test passed 48 hours of testing without ever resetting the PHY. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Handle serious errors in exactly one interrupt handlerSteve Hodgson
'Fatal' errors set an interrupt flag associated with a specific event queue; only read the syndrome vector if we see that queue's flag set (legacy interrupts) or in the interrupt handler for that queue (MSI). Do not ignore an interrupt if the fatal error flag is set but specific error flags are all zero. Even if we don't schedule a reset, we must respect the queue mask and rearm the appropriate event queues. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Consistently report short MCDI responses as EIOBen Hutchings
In some cases failing functions were returning 0 which is obviously wrong. In other cases they were returning inappropriate error codes. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sfc: Ignore parity errors in the other port's SRAMSteve Hodgson
Siena has a separate SRAM bank for each port. On single-port boards these can be merged together, so each port has an interrupt flag for parity errors in the other port's SRAM. Currently we do not enable such merging and should mask this interrupt source. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28sky2: use the DMA state API instead of the pci equivalentsFUJITA Tomonori
This replace the PCI DMA state API (include/linux/pci-dma.h) with the DMA equivalents since the PCI DMA state API will be obsolete. No functional change. For further information about the background: http://marc.info/?l=linux-netdev&m=127037540020276&w=2 Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28bnx2x: Remove two prefetch()Eric Dumazet
1) Even on 64bit arches, sizeof(struct sk_buff) < 256 2) No need to prefetch same pointer twice. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Acked-by: Eilon Greenstein <eilong@broadcom.com> Acked-by: Eliezer Tamir <eliezer@tamir.org.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28ixgbe: disable MSI-X by default on certain Cisco adaptersNicholas Nunley
Due to an errata in 82598 parts MSI-X needs to be disabled in certain ixgbe devices designed to transfer peer-to-peer traffic on the PCIe bus. This patch sets the default interrupt type to MSI rather than MSI-X for specific Cisco ixgbe adapters. Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Acked-by: John Ronciak <john.ronciak@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28ixgbe: add registers etc. printout code just before resetting adaptersTaku Izumi
This patch adds registers (,tx/rx rings' status and so on) printout code just before resetting adapters. This will be helpful for detecting the root cause of adapters reset. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28igb: add registers etc. printout code just before resetting adaptersTaku Izumi
This patch adds registers (,tx/rx rings' status and so on) printout code just before resetting adapters. This will be helpful for detecting the root cause of adapters reset. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28e1000e: add registers etc. printout code just before resetting adaptersTaku Izumi
This patch adds registers (,tx/rx rings' status and so on) printout code just before resetting adapters. This will be helpful for detecting the root cause of adapters reset. Signed-off-by: Taku Izumi <izumi.taku@jp.fujitsu.com> Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-28e1000: Use netdev_<level>, pr_<level> and dev_<level>Emil Tantilov
This patch is an alternative to similar patch provided by Joe Perches. Substitute DPRINTK macro for e_<level> that uses netdev_<level> and dev_<level> similar to e1000e. - Convert printk to pr_<level> where applicable. - Use common #define pr_fmt for the driver. - Use dev_<level> for displaying text in parts of the driver where the interface name is not assigned (like e1000_param.c). - Better align test with the new macros. CC: Joe Perches <joe@perches.com> Signed-off-by: Emil Tantilov <emil.s.tantilov@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbevf: use DMA API instead of PCI DMA functionsNick Nunley
Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbe: use DMA API instead of PCI DMA functionsNick Nunley
Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgb: use DMA API instead of PCI DMA functionsNick Nunley
Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27igbvf: use DMA API instead of PCI DMA functionsNick Nunley
Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27igb: convert igb from using PCI DMA functions to using DMA API functionsAlexander Duyck
This patch makes it so that igb now uses the DMA API functions instead of the PCI API functions. To do this the pci_dev pointer that was in the rings has been replaced with a device pointer, and as a result all references to [tr]x_ring->pdev have been replaced with [tr]x_ring->dev. This patch is based of of work originally done by Nicholas Nunley. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27e1000e: use DMA API instead of PCI DMA functionsNick Nunley
Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27e1000: use DMA API instead of PCI DMA functionsNick Nunley
Signed-off-by: Nicholas Nunley <nicholasx.d.nunley@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27cxgb4: set skb->rxhashDimitris Michailidis
Implement the ->set_flags ethtool method to control NETIF_F_RXHASH and set skb->rxhash to the HW calculated hash accordingly. Follow Eric Dumazet's suggestion and use the hash value raw. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27net/sb1250: setup the pdevice within the soc codeSebastian Andrzej Siewior
doing it within the driver does not look good. And surely isn't how platform devices were meat to be used. Acked-by: Ralf Baechle <ralf@linux-mips.org> Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27net/sb1250: remove CONFIG_SIBYTE_STANDALONESebastian Andrzej Siewior
CONFIG_SIBYTE_STANDALONE is gone since v2.6.31-rc1 ("MIPS: Sibyte: Remove standalone kernel support") This is a missing piece. Signed-off-by: Sebastian Andrzej Siewior <sebastian@breakpoint.cc> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27cxgb4: increase serial number lengthDimitris Michailidis
Some boards have longer serial numbers in their VPD, up to 24 bytes. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27cxgb4: parse the VPD instead of relying on a static VPD layoutDimitris Michailidis
Some boards' VPDs contain additional keywords or have longer serial numbers, meaning the keyword locations are variable. Ditch the static layout and use the pci_vpd_* family of functions to parse the VPD instead. Signed-off-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbe: Properly display 1 gig downshift warning for backplaneAnjali Singhai
Description: When using Intel smartspeed, the patch displays a warning when the link down shifts to 1 Gig. Signed-off-by: Anjali Singhai <anjali.singhai@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbe: cleanup ethtool autoneg inputDon Skidmore
The way we were setting autoneg via ethtool was inconstant with that of our other drivers. It will change the following: If autoneg is off: >ethtool -a eth0 Pause parameters for eth0: Autonegotiate: off RX: off TX: off Before: >ethtool -A eth0 autoneg on >ethtool -a eth0 Pause parameters for eth0: Autonegotiate: off RX: off TX: off Now: >ethtool -A eth0 autoneg on >ethtool -a eth0 Pause parameters for eth0: Autonegotiate: on RX: on TX: on Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbevf: Fix link speed displayGreg Rose
The ixgbevf driver would always report 10Gig speeds even when the link speed is downshifted to 1Gig. This patch fixes that problem. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgb: Use pr_<level> and netdev_<level>Joe Perches
Convert DEBUGOUTx to pr_debug Convert DEBUGFUNC to more commonly used ENTER Convert mac address output to %pM Use #define pr_fmt Convert a few printks to pr_<level> Improve ixgb_mc_addr_list_update: use a temporary for current mc address Use etherdevice.h functions for mac address testing Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbe: ixgbe_down needs to stop dev_watchdogJohn Fastabend
There is a small race between when the tx queues are stopped and when netif_carrier_off() is called in ixgbe_down. If the dev_watchdog() timer fires during this time it is possible for a false tx timeout to occur. This patch moves the netif_carrier_off() so that it is called before the tx queues are stopped preventing the dev_watchdog timer from detecting false tx timeouts. The race is seen occosionally when FCoE or DCB settings are being configured or changed. Testing note, running ifconfig up/down will not reproduce this issue because dev_open/dev_close call dev_deactivate() and then dev_activate(). Signed-off-by: John Fastabend <john.r.fastabend@intel.com> Acked-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27igb: add support for reporting 5GT/s during probe on PCIe Gen2Alexander Duyck
This change corrects the fact that we were not reporting Gen2 link speeds when we were in fact connected at Gen2 rates. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbe: fix bug when EITR=0 causing no writebacksJesse Brandeburg
writebacks can be held indefinitely by hardware if EITR=0, when combined with TXDCTL.WTHRESH=8. When EITR=0, WTHRESH should be set back to zero. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbe: enable extremely low latencyJesse Brandeburg
82598/82599 can support EITR == 0, which allows for the absolutely lowest latency setting in the hardware. This disables writeback batching and anything else that relies upon a delayed interrupt. This patch enables the feature of "override" when a user sets rx-usecs to zero, the driver will respect that setting over using RSC, and automatically disable RSC. If rx-usecs is used to set the EITR value to 0, then the driver should disable LRO (aka RSC) internally until EITR is set to non-zero again. Signed-off-by: Jesse Brandeburg <jesse.brandeburg@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27igbvf: double increment nr_fragsKoki Sanagi
There is no need to increment nr_frags because skb_fill_page_desc increments it. Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27igb: double increment nr_fragsKoki Sanagi
There is no need to increment nr_frags because skb_fill_page_desc increments it. Signed-off-by: Koki Sanagi <sanagi.koki@jp.fujitsu.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/e100.c drivers/net/e1000e/netdev.c
2010-04-27cxgb3: Wait longer for control packets on initializationAndre Detsch
In some Power7 platforms, when using VIOS (Virtual I/O Server), we need to wait longer for control packets to finish transfer during initialization. Without this change, initialization may fail prematurely. Signed-off-by: Wen Xiong <wenxiong@us.ibm.com> Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Acked-by: Divy Le Ray <divy@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27e1000e: enable/disable ASPM L0s and L1 and ERT according to hardware errataBruce Allan
Prompted by a previous patch submitted by Matthew Garret <mjg@redhat.com>, further digging into errata documentation reveals the current enabling or disabling of ASPM L0s and L1 states for certain parts supported by this driver are incorrect. 82571 and 82572 should always disable L1. For standard frames, 82573/82574/82583 can enable L1 but L0s must be disabled, and for jumbo frames 82573/82574 must disable L1. This allows for some parts to enable L1 in certain configurations leading to better power savings. Also according to the same errata, Early Receive (ERT) should be disabled on 82573 when using jumbo frames. Cc: Matthew Garret <mjg@redhat.com> Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-27ixgbe: Power down PHY during driver resetsPeter Waskiewicz
The PHY laser is still on during driver init. It's allowing garbage to hit our FIFO, which eventually can cause the entire device to die. Power down the laser while setting up the device, and re-enable the laser before getting link. Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26r8169: more broken register writes workaroundfrançois romieu
78f1cd02457252e1ffbc6caa44a17424a45286b8 ("fix broken register writes") does not work for Al Viro's r8169 (XID 18000000). Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26r8169: failure to enable mwi should not be fatalfrançois romieu
Few (6) network drivers enable mwi explicitly. Fewer worry about a failure. It is not a fix but it should avoid some annoyance like http://bugzilla.kernel.org/show_bug.cgi?id=15454 Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Conrad Kostecki <conikost@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26net: use sk_sleep()Eric Dumazet
Commit aa395145 (net: sk_sleep() helper) missed three files in the conversion. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26pppoe: use pppoe_pernet instead of directly net_genericJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-26tg3: Fix INTx fallback when MSI failsAndre Detsch
tg3: Fix INTx fallback when MSI fails MSI setup changes the value of irq_vec in struct tg3 *tp. This attribute must be taken into account and restored before we try to do a new request_irq for INTx fallback. In powerpc, the original code was leading to an EINVAL return within request_irq, because the driver was trying to use the disabled MSI virtual irq number instead of tp->pdev->irq. Signed-off-by: Andre Detsch <adetsch@br.ibm.com> Acked-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-25e100: Fix the TX workqueue raceAlan Cox
Nothing stops the workqueue being left to run in parallel with close or a few other operations. This causes double unmaps and the like. See kerneloops.org #1041230 for an example Signed-off-by: Alan Cox <alan@linux.intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-25sky2: add support for receive hashingStephen Hemminger
Sky2 hardware supports hardware receive hash calculation. Now that Receive Packet Steering is available, add support to enable it. This version does not depend on CONFIG_RPS. Also set_flags rejects all values except RXHASH, so driver won't have to change next time somebody adds a new one. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23gianfar: Fix potential oops during OF address translationAnton Vorontsov
gianfar driver may pass NULL pointer to the of_translate_address(), which may lead to a kernel oops. Fix this by using of_iomap(), which is also much simpler and shorter. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23fsl_pq_mdio: Fix kernel oops during OF address translationAnton Vorontsov
Old P1020RDB device trees were not specifing tbipa address for MDIO nodes, which is now causing this kernel oops: ... eth2: TX BD ring size for Q[6]: 256 eth2: TX BD ring size for Q[7]: 256 Unable to handle kernel paging request for data at address 0x00000000 Faulting instruction address: 0xc0015504 Oops: Kernel access of bad area, sig: 11 [#1] ... NIP [c0015504] memcpy+0x3c/0x9c LR [c000a9f8] __of_translate_address+0xfc/0x21c Call Trace: [df839e00] [c000a94c] __of_translate_address+0x50/0x21c (unreliable) [df839e50] [c01a33e8] get_gfar_tbipa+0xb0/0xe0 ... The old device trees are buggy, though having a dead ethernet is better than a dead kernel, so fix the issue by using of_iomap(). Also, a somewhat similar issue exist in the probe() routine, though there the oops is only a possibility. Nonetheless, fix it too. Signed-off-by: Anton Vorontsov <avorontsov@mvista.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23Merge branch 'master' into for-davemJohn W. Linville
Conflicts: drivers/net/wireless/ath/ath9k/phy.c drivers/net/wireless/iwlwifi/iwl-6000.c drivers/net/wireless/iwlwifi/iwl-debugfs.c
2010-04-23bnx2x: add support for receive hashingTom Herbert
Add support to bnx2x to extract Toeplitz hash out of the receive descriptor for use in skb->rxhash. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v0.10.2 at 2024-10-20 12:33:52 (GMT)