summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2009-09-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdogLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog: [WATCHDOG] sizeof cleanup [WATCHDOG] wdt_pci: fix printk and variable type [WATCHDOG] wdt_pci - use pci_request_region [WATCHDOG] ar7_wdt: Fix error handling during probe. [WATCHDOG] ar7_wdt: convert to become a platform driver [WATCHDOG] fix book E watchdog to take WDIOC_SETTIMEOUT arg in seconds [WATCHDOG] davinci: use clock framework for timer frequency [WATCHDOG] Use DIV_ROUND_UP() macro in the coh901327 WDT [WATCHDOG] Add support for WM831x watchdog [WATCHDOG] Add watchdog driver for NUC900 [WATCHDOG] add SBC-FITPC2 watchdog driver
2009-09-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (262 commits) sh: mach-ecovec24: Add user debug switch support sh: Kill off unused se_skipped in alignment trap notification code. sh: Wire up HAVE_SYSCALL_TRACEPOINTS. video: sh_mobile_lcdcfb: use both register sets for display panning video: sh_mobile_lcdcfb: implement display panning sh: Fix up sh7705 flush_dcache_page() build. sh: kfr2r09: document the PLL/FLL <-> RF relationship. sh: mach-ecovec24: need asm/clock.h. sh: mach-ecovec24: deassert usb irq on boot. sh: Add KEYSC support for EcoVec24 sh: add kycr2_delay for sh_keysc sh: cpufreq: Include CPU id in info messages. sh: multi-evt support for SH-X3 proto CPU. sh: clkfwk: remove bogus set_bus_parent() from SH7709. sh: Fix the indication point of the liquid crystal of AP-325RXA(AP3300) sh: Add EcoVec24 romImage defconfig sh: USB disable process is needed if romImage boot for EcoVec24 sh: EcoVec24: add HIZA setting for LED sh: EcoVec24: write MAC address in boot sh: Add romImage support for EcoVec24 ...
2009-09-18Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6 * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6: [IA64] Clean up linker script using standard macros. [IA64] Use standard macros for page-aligned data. [IA64] Use .ref.text, not .text.init for start_ap. [IA64] sgi-xp: fix printk format warnings [IA64] ioc4_serial: fix printk format warnings [IA64] mbcs: fix printk format warnings [IA64] pci_br, fix infinite loop in find_free_ate() [IA64] kdump: Short path to freeze CPUs [IA64] kdump: Try INIT regardless of [IA64] kdump: Mask INIT first in panic-kdump path [IA64] kdump: Don't return APs to SAL from kdump [IA64] kexec: Unregister MCA handler before kexec [IA64] kexec: Make INIT safe while transition to [IA64] kdump: Mask MCA/INIT on frozen cpus Fix up conflict in arch/ia64/kernel/vmlinux.lds.S as per Tony's suggestion.
2009-09-18Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6 * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6: (55 commits) regulator: Voltage count for AB3100 mfd: Convert WM8350 to use request_threaded_irq() mfd: Update MAINTAINERS patterns for WM831x mfd: Fix twl4030-power warnings regulator: AB3100 support rtc: AB3100 RTC support mfd: Fix ab3100-otp build failure mfd: OMAP: Board-specifc twl4030 DPS scripts for RX51 board mfd: Print warning for twl4030 out-of-order script loading mfd: Add support for TWL4030/5030 dynamic power switching mfd: AB3100 OTP readout regulator: Add Freescale MC13783 driver mfd: Add Freescale MC13783 driver mfd: AB3100 disable irq nosync mfd: AB3100 alter default setting mfd: AB3100 propagate error mfd: AB3100 accessor function cleanups rtc: Add support for RTCs on Wolfson WM831x devices regulator: get pcap data from the parent device input: PCAP2 misc input driver ...
2009-09-18Merge branch 'omap-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6 * 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (47 commits) OMAP clock: use debugfs_remove_recursive() for rewinding OMAP2/3/4 core: create omap_device layer OMAP: omap_hwmod: call omap_hwmod init at boot; create interconnects OMAP2/3/4: create omap_hwmod layer OMAP2/3 board-*.c files: read bootloader configuration earlier OMAP2/3/4 PRCM: add module IDLEST wait code OMAP2/3 PM: create the OMAP PM interface and add a default OMAP PM no-op layer OMAP3 clock: remove superfluous calls to omap2_init_clk_clkdm OMAP clock: associate MPU clocks with the mpu_clkdm OMAP3 clock: Fixed processing of bootarg 'mpurate' OMAP: SDRC: Add several new register definitions OMAP: powerdomain: Fix overflow when doing powerdomain deps lookups. OMAP: PM: Added suspend target state control to debugfs for OMAP3 OMAP: PM debug: Add PRCM register dump support OMAP: PM debug: make powerdomains use PM-debug counters OMAP: PM: Add pm-debug counters OMAP: PM: Add closures to clkdm_for_each and pwrdm_for_each. OMAP: PM: Hook into PM counters OMAP: PM counter infrastructure. OMAP3: PM: fix lockdep warning caused by omap3_pm_init ...
2009-09-18Merge branch 'next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq * 'next' of git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq: [CPUFREQ] Fix NULL ptr regression in powernow-k8 [CPUFREQ] Create a blacklist for processors that should not load the acpi-cpufreq module. [CPUFREQ] Powernow-k8: Enable more than 2 low P-states [CPUFREQ] remove rwsem lock from CPUFREQ_GOV_STOP call (second call site) [CPUFREQ] ondemand - Use global sysfs dir for tuning settings [CPUFREQ] Introduce global, not per core: /sys/devices/system/cpu/cpufreq [CPUFREQ] Bail out of cpufreq_add_dev if the link for a managed CPU got created [CPUFREQ] Factor out policy setting from cpufreq_add_dev [CPUFREQ] Factor out interface creation from cpufreq_add_dev [CPUFREQ] Factor out symlink creation from cpufreq_add_dev [CPUFREQ] cleanup up -ENOMEM handling in cpufreq_add_dev [CPUFREQ] Reduce scope of cpu_sys_dev in cpufreq_add_dev [CPUFREQ] update Doc for cpuinfo_cur_freq and scaling_cur_freq
2009-09-18pty_write: don't do a tty_wakeup() when the buffers are fullLinus Torvalds
Commit ac89a9174 ("pty: don't limit the writes to 'pty_space()' inside 'pty_write()'") removed the pty_space() checking, in order to let the regular tty buffer code limit the buffering itself. That was all good, but as a subtle side effect it meant that we'd be doing a tty_wakeup() even in the case where the buffers were all filled up, and didn't actually make any progress on the write. Which sounds innocuous, but it interacts very badly with the ppp_async code, which has an infinite loop in ppp_async_push() that tries to push out data to the tty. When we call tty_wakeup(), that loop ends up thinking that progress was made (see the subtle interactions between XMIT_WAKEUP and 'tty_stuffed' for details). End result: one unhappy ppp user. Fixed by noticing when tty_insert_flip_string() didn't actually do anything, and then not doing any more processing (including, very much not calling tty_wakeup()). Bisected-and-tested-by: Peter Volkov <pva@gentoo.org> Cc: stable@kernel.org (2.6.31) Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2009-09-18[WATCHDOG] sizeof cleanupWim Van Sebroeck
Use sizeof(*) instead of sizeof * (See Codingstyle documentation). Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-09-18[WATCHDOG] wdt_pci: fix printk and variable typeRandy Dunlap
Fix printk format warning: drivers/watchdog/wdt_pci.c:652: warning: format '%04x' expects type 'unsigned int', but argument 2 has type 'resource_size_t' and then use resource_size_t for the "io" variable as well so that it won't be truncated. Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-09-18[WATCHDOG] wdt_pci - use pci_request_regionWim Van Sebroeck
Use pci_request_region instead of request_region for this pci_driver. Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-09-18[WATCHDOG] ar7_wdt: Fix error handling during probe.Wim Van Sebroeck
Fix error handling in the probe function. Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Tested-by: Florian Fainelli <florian@openwrt.org>
2009-09-18[WATCHDOG] ar7_wdt: convert to become a platform driverFlorian Fainelli
This patch converts the ar7_wdt driver to become a platform driver. The AR7 SoC specific identification and base register calculation is performed by the board code, therefore we no longer need to have access to ar7_chip_id. We also remove the reboot notifier code to use the platform shutdown method as Wim suggested. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-09-18[WATCHDOG] fix book E watchdog to take WDIOC_SETTIMEOUT arg in secondsChris Friesen
The WDIOC_SETTIMEOUT argument is supposed to be a "seconds" value. However, the book E wdt currently treats it as a "period" which is interpreted in a board-specific way. This patch allows the user to pass in a "seconds" value and the driver will set the smallest timeout that is at least as large as specified by the user. It's been tested on e500 hardware and works as expected. The patch only modifies the CONFIG_FSL_BOOKE case, the CONFIG_4xx case is left unmodified as I don't have any hardware to test it on. Signed-off-by: Chris Friesen <cfriesen@nortel.com> Cc: Kumar Gala <galak@gate.crashing.org> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-09-18[WATCHDOG] davinci: use clock framework for timer frequencyKevin Hilman
Remove use of CLOCK_TICK_RATE in favor of using clock framework for getting timer frequency. Signed-off-by: Kevin Hilman <khilman@deeprootsystems.com> Signed-off-by: Russell King <linux@arm.linux.org.uk> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-09-18[WATCHDOG] Use DIV_ROUND_UP() macro in the coh901327 WDTLinus Walleij
I saw Julia Lawalls various commits fixing up the use of rounding macros and since my already submitted patch was not caught in this I took it upon myself to fix it up for this driver as well. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-09-18[WATCHDOG] Add support for WM831x watchdogMark Brown
The WM831x series of devices provide a watchdog with configurable behaviour on timer expiry. Currently this driver support refreshes via a register or GPIO line and autonomous refreshes from a hardware source (eg, a clock). Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-09-18[WATCHDOG] Add watchdog driver for NUC900Wan ZongShun
Add watchdog device driver for the Nuvoton NUC900 series SoCs. Signed-off-by: Wan ZongShun <mcuos.com@gmail.com> Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
2009-09-18[WATCHDOG] add SBC-FITPC2 watchdog driverDenis Turischev
Add support for watchdog found on SBC-FITPC2 board. Signed-off-by: Denis Turischev <denis@compulab.co.il> Signed-off-by: Mike Rapoport <mike@compulab.co.il> Signed-off-by: Wim Van Sebroeck <wim@iguana.be> Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
2009-09-18Merge branch 'upstream-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev * 'upstream-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev: libata: Add pata_atp867x driver for Artop/Acard ATP867X controllers pata_amd: do not filter out valid modes in nv_mode_filter sata_promise: update reset code sata_promise: disable hotplug on 1st gen chips libata: fix spurious WARN_ON_ONCE() on port freeze ahci: restore pci_intx() handling
2009-09-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6: sparc: Update defconfigs. sparc: Kill PROM console driver.
2009-09-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6Linus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (66 commits) be2net: fix some cmds to use mccq instead of mbox atl1e: fix 2.6.31-git4 -- ATL1E 0000:03:00.0: DMA-API: device driver frees DMA pkt_sched: Fix qstats.qlen updating in dump_stats ipv6: Log the affected address when DAD failure occurs wl12xx: Fix print_mac() conversion. af_iucv: fix race when queueing skbs on the backlog queue af_iucv: do not call iucv_sock_kill() twice af_iucv: handle non-accepted sockets after resuming from suspend af_iucv: fix race in __iucv_sock_wait() iucv: use correct output register in iucv_query_maxconn() iucv: fix iucv_buffer_cpumask check when calling IUCV functions iucv: suspend/resume error msg for left over pathes wl12xx: switch to %pM to print the mac address b44: the poll handler b44_poll must not enable IRQ unconditionally ipv6: Ignore route option with ROUTER_PREF_INVALID bonding: make ab_arp select active slaves as other modes cfg80211: fix SME connect rc80211_minstrel: fix contention window calculation ssb/sdio: fix printk format warnings p54usb: add Zcomax XG-705A usbid ...
2009-09-18Merge branch 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linusLinus Torvalds
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (51 commits) MIPS: BCM63xx: Add integrated ethernet mac support. MIPS: BCM63xx: Add support for the Broadcom BCM63xx family of SOCs. MIPS: BCM63xx: Add Broadcom 63xx CPU definitions. MIPS: Octeon: Move some platform device registration to its own file. MIPS: Don't corrupt page tables on vmalloc fault. MIPS: Shrink the size of tlb handler MIPS: Alchemy: override loops_per_jiffy detection MIPS: hw_random: Add hardware RNG for Octeon SOCs. MIPS: Octeon: Add hardware RNG platform device. MIPS: Remove useless zero initializations. MIPS: Alchemy: get rid of allow_au1k_wait MIPS: Octeon: Set kernel_uses_llsc to false on non-SMP builds. MIPS: Allow kernel use of LL/SC to be separate from the presence of LL/SC. MIPS: Get rid of CONFIG_CPU_HAS_LLSC MIPS: Malta: Remove pointless use use of CONFIG_CPU_HAS_LLSC MIPS: Rewrite clearing of ll_bit on context switch in C MIPS: Rewrite sysmips(MIPS_ATOMIC_SET, ...) in C with inline assembler MIPS: Consolidate all CONFIG_CPU_HAS_LLSC use in a single C file. MIPS: Clean up linker script using new linker script macros. MIPS: Use PAGE_SIZE in assembly instead of _PAGE_SIZE. ...
2009-09-17libata: Add pata_atp867x driver for Artop/Acard ATP867X controllersJohn(Jung-Ik) Lee
This is a new pata driver for ARTOP 867X 64bit 4-channel UDMA133 ATA ctrls. Based on the Atp867 data sheet rev 1.2, Acard, and in part on early ide codes from Eric Uhrhane <ericu@google.com>. Signed-off-by: John(Jung-Ik) Lee <jilee@google.com> Reviewed-by: Grant Grundler <grundler@google.com> Reviewed-by: Gwendal Gringo <gwendal@google.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-09-17pata_amd: do not filter out valid modes in nv_mode_filterRobert Hancock
On a Compaq Presario V3000 laptop (NVIDIA MCP51 chipset), pata_amd selects PIO0 mode for the PATA DVD-RAM drive instead of MWDMA2 which it supports: ata4.00: ATAPI: HL-DT-ST DVDRAM GSA-4084N, KQ09, max MWDMA2 ata4: nv_mode_filter: 0x39f&0x7001->0x1, BIOS=0x0 (0x0) ACPI=0x7001 (60:600:0x11) ata4.00: configured for PIO0 For some reason, the BIOS-set UDMA configuration returns 0 and the ACPI _GTM reports that UDMA2 and PIO0 are enabled. This causes nv_mode_filter to end up allowing only PIO0 and UDMA0-2. Since the drive doesn't support UDMA we end up using PIO0. Since the controllers should always support PIO4, MWDMA2 and UDMA2 regardless of what cable type is used, let's make sure we don't filter out these modes regardless of what wacky settings the BIOS is using. Signed-off-by: Robert Hancock <hancockrwd@gmail.com> Cc: stable@kernel.org Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-09-17sata_promise: update reset codeMikael Pettersson
sata_promise's reset code has deviated quite a bit from the Promise reference driver's, and it has been observed to fail to recover from errors in some cases. This patch thus updates the reset code to more closely match the reference driver: - soft reset (pdc_reset_port): * wait for ATA engine to not be in packet command mode (2nd gen only) * write reset bit in PDC_CTLSTAT before the first read in the loop * for 2nd gen SATA follow up with FPDMA reset and clearing error status registers - hard reset (pdc_sata_hardreset): * wait for ATA engine to not be in packet command mode (2nd gen only) * reset ATA engine via the PCI control register * Tejun's change to use non-waiting hardreset + follow-up SRST I'm not changing the hotplug mask bits since they are taken care of by sata_promise's ->freeze() and ->thaw() operations. And I'm not writing the PMP port # because that's always zero (for now). Tested here on various controllers. In particular, one disk which used to timeout and fail to recover from certain hdparm and smartmonctl commands now works nicely. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-09-17sata_promise: disable hotplug on 1st gen chipsMikael Pettersson
1st generation Promise SATA chips are prone to generating spurious hotplug events which can disrupt normal operation. This has been observed on 20376 and 20378 chips. This patch thus disables hotplug support on 1st gen chips while leaving it enabled for 2nd gen chips. The pdc_sata_hotplug_offset() function becomes redundant so it is removed. Tested on 1st gen 20376 and 20378 mainboard chips and on a 2nd gen SATA300 PCI card. Signed-off-by: Mikael Pettersson <mikpe@it.uu.se> Tested-by: Kurt Roeckx <kurt@roeckx.be> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-09-17libata: fix spurious WARN_ON_ONCE() on port freezeTejun Heo
Commit 54c38444fad6a99b4b19512f8f0055d69115e69e makes libata abort qcs after the port is frozen. This is necessary to guarantee that TF registers are accessed after the DMA engine is shutdown after an error. However, this triggers WARN_ON_ONCE() check in ata_qc_complete() spuriously. Move WARN_ON_ONCE() downwards such that failing commands while frozen doesn't trigger it. Signed-off-by: Tejun Heo <tj@kernel.org> Cc: stable <stable@kernel.org> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-09-17ahci: restore pci_intx() handlingTejun Heo
Commit a5bfc4714b3f01365aef89a92673f2ceb1ccf246 dropped explicit pci_intx() manipulation from ahci because it seemed unnecessary and ahci doesn't seem to be the right place to be tweaking it if it were. This was largely okay but there are exceptions. There was one on an embedded platform which was fixed via firmware and now bko#14124 reports it on a HP DL320. http://bugzilla.kernel.org/show_bug.cgi?id=14124 I still think this isn't something libata drivers should be caring about (the only ones which are calling pci_intx() explicitly are libata ones and one other driver) but for now reverting the change seems to be the right thing to do. Signed-off-by: Tejun Heo <tj@kernel.org> Reported-by: Thomas Jarosch <thomas.jarosch@intra2net.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2009-09-17MIPS: BCM63xx: Add integrated ethernet mac support.Maxime Bizon
Signed-off-by: Maxime Bizon <mbizon@freebox.fr> Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: hw_random: Add hardware RNG for Octeon SOCs.David Daney
Signed-off-by: David Daney <ddaney@caviumnetworks.com> Acked-by: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17MIPS: Octeon: False positive timeoutRoel Kluin
If we reach the test just below the loop with a `timeout' value of 0, this does not mean that the timeout caused the loop to end, but rather the `smi_rd.s.pending', in the last iteration. If timeout caused the loop to end, then `timeout' is -1, not 0. Since this can occur only in the last iteration, it is not very likely to be a problem. By changing the post- to prefix decrement we ensure that a timeout of 0 does mean it timed out. Signed-off-by: Roel Kluin <roel.kluin@gmail.com> Acked-by: David Daney <ddaney@caviumnetworks.com> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
2009-09-17be2net: fix some cmds to use mccq instead of mboxSathya Perla
All cmds issued to BE after the creation of mccq must now use the mcc-q (and not mbox) to avoid a hw issue that results in mbox poll timeout. Signed-off-by: Sathya Perla <sathyap@serverengines.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-17atl1e: fix 2.6.31-git4 -- ATL1E 0000:03:00.0: DMA-API: device driver frees DMAJie Yang
use the wrong API when free dma. So when map dma use a flag to demostrate whether it is 'pci_map_single' or 'pci_map_page'. When free the dma, check the flags to select the right APIs('pci_unmap_single' or 'pci_unmap_page'). set the flags type to u16 instead of unsigned long on David's comments. Signed-off-by: Jie Yang <jie.yang@atheros.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-17wl12xx: Fix print_mac() conversion.David S. Miller
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2009-09-17Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bpLinus Torvalds
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp: amd64_edac: check NB MCE bank enable on the current node properly amd64_edac: Rewrite unganged mode code of f10_early_channel_count amd64_edac: cleanup amd64_check_ecc_enabled x86, EDAC: Provide function to return NodeId of a CPU amd64_edac: build driver only on AMD hardware
2009-09-17Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu: (53 commits) m68knommu: Make PAGE_SIZE available to assembly files. m68knommu: fix ColdFire definition of CLOCK_TICK_RATE m68knommu: set multi-function pins for ethernet when enabled m68knommu: remove special interrupt handling code for ne2k support m68knommu: relax IO_SPACE_LIMIT setting m68knommu: remove ColdFire direct interrupt register access m68knommu: create a speciailized ColdFire 5272 interrupt controller m68knommu: add support for second interrupt controller of ColdFire 5249 m68knommu: clean up old ColdFire timer irq setup m68knommu: map ColdFire interrupts to correct masking bits m68knommu: clean up ColdFire 532x CPU timer setup m68knommu: simplify ColdFire "timers" clock initialization m68knommu: support code to mask external interrupts on old ColdFire CPU's m68knommu: merge old ColdFire interrupt controller masking macros m68knommu: remove duplicate ColdFire mcf_autovector() code m68knommu: move ColdFire INTC definitions to new include file m68knommu: mask off all interrupts in ColdFire intc-simr controller m68knommu: remove timer device interrupt setup for ColdFire 532x m68knommu: remove interrupt masking from ColdFire pit timer m68knommu: remove unecessary interrupt level setting in ColdFire 520x setup ...
2009-09-17Merge branch 'hwmon-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging * 'hwmon-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jdelvare/staging: hwmon: (lm85) Don't bind to Winbond/Nuvoton WPCD377I hwmon: (pcf8591) Documentation clean-ups hwmon: Clearly mark ACPI drivers as such hwmon: Use resource_size hwmon: Include <linux/io.h> instead of <asm/io.h> hwmon: (tmp421) Add documentation hwmon: Add driver for Texas Instruments TMP421/422/423 sensor chips hwmon-vid: Ignore 6th VID pin of AMD family 0Fh processors hwmon: (asus_atk0110) Add maintainer information hwmon: (abituguru3) Support multiple DMI strings per chip ID
2009-09-17Merge branch 'for-upstream' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb * 'for-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/dvrabel/uwb: uwb: avoid radio controller reset loops uwb: stop uwbd thread if rc->start() fails uwb: handle radio controller events with out-of-range IDs correctly
2009-09-17regulator: Voltage count for AB3100Linus Walleij
This sets the number of voltages for the AB3100 regulators so that they play well with the voltage listing functions and can be used properly with the MMC regulator integration glue for example. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17mfd: Convert WM8350 to use request_threaded_irq()Mark Brown
Instead of hand rolling our own variant. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17mfd: Fix twl4030-power warningsSamuel Ortiz
KEY_1 and KEY_2 definitions conflicts with include/linux/input.h Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17regulator: AB3100 supportLinus Walleij
This adds support for the regulators found in the AB3100 Mixed-Signal IC. It further also defines platform data for the ST-Ericsson U300 platform and extends the AB3100 MFD driver so that platform/board data with regulation constraints and an init function can be passed down all the way from the board to the regulators. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17rtc: AB3100 RTC supportLinus Walleij
This adds support for the RTC found inside the AB3100 Mixed Signal chip. The symbols used for communicating with the chip is found in the mfd/ab3100-core.c driver that also provides the platform device. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Acked-by: Alessandro Zummo <alessandro.zummo@towertech.it> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17mfd: Fix ab3100-otp build failureSamuel Ortiz
ab3100.h should include linux/workqueue.h for otp to build properly. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17mfd: Print warning for twl4030 out-of-order script loadingAmit Kucheria
When the sleep script is loaded before the wakeup script, there is a chance that the system might go to sleep before the wakeup script loading is completed. This will lead to a system that does not wakeup and has been observed to cause non-booting boards. Various options were considered to solve this problem, including modification of the core twl4030 power code to be smart enough to reorder the loading of the scripts. But it felt too over-engineered. Hence this patch just warns the DPS script developer so that they may be reordered in the board-code itself. Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17mfd: Add support for TWL4030/5030 dynamic power switchingAmit Kucheria
The TWL4030/5030 family of multifunction devices allows board-specific control of the the various regulators, clock and reset lines through 'scripts' that are loaded into its memory. This allows for Dynamic Power Switching (DPS). Implement board-independent core support for DPS that is then used by board-specific code to load custom DPS scripts. Signed-off-by: Amit Kucheria <amit.kucheria@verdurent.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17mfd: AB3100 OTP readoutLinus Walleij
This adds the ability to read out OTP (One-Time Programmable) registers in the AB3100 MFD ASIC. It's a simple sysfs file you can cat to prompt. The OTP registers of the AB3100 are used to store various device-unique information such as customer ID, product flags and the 3GPP standard IMEI (International Mobile Equipment Indentity) number. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17regulator: Add Freescale MC13783 driverSascha Hauer
This driver provides basic support for the voltage regulators integrated into the Freescale MC13783 PMIC. It is currently only possible to enable/disable outputs, not to actually set the voltage. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17mfd: Add Freescale MC13783 driverSascha Hauer
This driver provides the core Freescale MC13783 support. It registers the client platform_devices and provides access to the A/D converter. Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
2009-09-17mfd: AB3100 disable irq nosyncLinus Walleij
This will make the worker fire interrupt disable the AB3100 IRQ without sync which resolves a race since the interrupt obviously cannot wait for itself to complete while being handled. Signed-off-by: Linus Walleij <linus.walleij@stericsson.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>