summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-02-25e1000e: rename e1000e_reload_nvm() and call as function pointerBruce Allan
Rename e1000e_reload_nvm() to e1000e_reload_nvm_generic() to signify the function is used for more than one MAC-family type, and set and use it as a MAC ops function pointer to be consistent with the driver design. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-25e1000e: cleanup - remove unnecessary variableBruce Allan
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-25e1000e: use true/false for boolean send_xon, do not assume always trueBruce Allan
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-25e1000e: cleanup comment in e1000_hash_mc_addr()Bruce Allan
Remove reference to non-existant function. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-25e1000e: rename e1000e_config_collision_dist() and call as function pointerBruce Allan
Rename e1000e_config_collision_dist() to e1000e_config_collision_dist_generic() to signify the function is used for more than one MAC-family type, and set and use it as a MAC ops function pointer to be consistent with the driver design. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-25e1000e: comment correction in e1000e_set_kmrn_lock_loss_workaround_ich8lanBruce Allan
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-25e1000e: cleanup calls to setup_physical_interface function pointerBruce Allan
Call the MAC ops setup_physical_interface function pointer instead of the MAC-family-specific function to conform to the rest of the driver design. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-25e1000e: cleanup use of check_reset_block function pointerBruce Allan
Replace e1000_check_reset_block() inline function with calls to the PHY ops check_reset_block function pointer. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-25e1000e: cleanup use of check_mng_mode function pointerBruce Allan
Replace e1000_check_mng_mode() inline function with calls to the MAC ops check_mng_mode function pointer. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-25e1000e: cleanup: rename e1000e_setup_link() and call as function pointerBruce Allan
Rename e1000e_setup_link() to e1000e_setup_link_generic() to signify the function is used for more than one MAC-family type. The 82571-family has a custom setup_link function which also calls the generic function. The ich8lan-family has a custom function which should just be called via the function pointer. The 80003es2lan-family just uses the generic function. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-25e1000e: cleanup: rename e1000e_id_led_init() and call as function pointerBruce Allan
Rename e1000e_id_led_init() to e1000e_id_led_init_generic() to signify the function is used for more than one MAC-family type. For the ich8lan MAC family, some MACs use the generic function and others use the function e1000_id_led_init_pchlan(). In all cases where e1000e_id_led_init() was called directly, change to call the function pointer to be consistent with the driver design. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-24Staging: wlags49_h2: print MAC via printk format specifierDanny Kukawka
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
2012-02-24Staging: ft1000-pcmcia: print MAC via printk format specifierDanny Kukawka
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de>
2012-02-24usb/kaweth: print MAC via printk format specifierDanny Kukawka
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Acked-by: Oliver Neukum <oliver@neukum.name> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24usb/cdc_ncm: print MAC via printk format specifierDanny Kukawka
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24xscale/ixp2000/ixpdev: print MAC via printk format specifierDanny Kukawka
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Acked-by: Lennert Buytenhek <kernel@wantstofly.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24sun/sunqe: print MAC via printk format specifierDanny Kukawka
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24ixgbevf: print MAC via printk format specifierDanny Kukawka
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24dec/tulip/de4x5: print MAC via printk format specifierDanny Kukawka
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24cirrus/mac89x0: print MAC via printk format specifierDanny Kukawka
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Use memcpy to set the address to dev->dev_addr in set_mac_address, instead of mxing it up in a for loop with printing a debug msg. Check also if the given address is valid. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24amd/hplance.c: print MAC via printk format specifierDanny Kukawka
Print MAC/dev_addr via printk extended format specifier %pM instead of custom code. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24v2 e1000: Neaten e1000_dump functionTushar Dave
Use pr_<level> for printk Use temporary instead of multiple pr_conts Coalesce formats. Save a few bytes of object code too: $ size drivers/net/ethernet/intel/e1000/e1000_main.o* text data bss dec hex filename 60507 369 14120 74996 124f4 drivers/net/ethernet/intel/e1000/e1000_main.o.new 60717 369 14176 75262 125fe drivers/net/ethernet/intel/e1000/e1000_main.o.old Removed printing of pktdata. Signed-off-by: Joe Perches <joe@perches.com> Signed-off-by: Tushar Dave <tushar.n.dave@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-24e1000: Neaten e1000_config_dsp_after_link_changeJoe Perches
Separate a complicated bit of e1000_config_dsp_after_link_change into a new static function e1000_1000Mb_check_cable_length. Reduces indentation and adds a bit of clarity. Signed-off-by: Joe Perches <joe@perches.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-24e1000e: cosmetic comment changes to make lines less than 80 charactersBruce Allan
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-24e1000e: cosmetic change to boolean comparisonsBruce Allan
Recent discussions on LKML, kernel-janitors, linux-wireless and netdev have suggested boolean comparisons should use logical operators instead of equality comparisons with true/false. Signed-off-by: Bruce Allan <bruce.w.allan@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-24r8169: Support RX-FCS flag.Ben Greear
This allows the NIC to receive the Ethernet FCS and pass it up the stack, allowing sniffers and other interested programs to inspect the FCS. Signed-off-by: Ben Greear <greearb@candelatech.com>
2012-02-24r8169: Support RX-ALL flag.Ben Greear
This allows the NIC to receive packets with bad FCS and Runts, which can help when sniffing. NOTE: r8169, at least on my NIC, silently drops packets with bad FCS instead of counting them. It seems they are only received in any fashion if the RxCRC flag is set (which this patch allows). Signed-off-by: Ben Greear <greearb@candelatech.com>
2012-02-248139too: Support RX-FCS flag.Ben Greear
This allows the NIC to pass the Ethernet FCS on up the stack, and is useful when sniffing networks. Signed-off-by: Ben Greear <greearb@candelatech.com>
2012-02-248139too: Support RX-ALL logic.Ben Greear
This allows the NIC to receive Runts and frames with bad Ethernet Frame Checksums (FCS). Useful to sniffing & diagnosing bad networks. Signed-off-by: Ben Greear <greearb@candelatech.com>
2012-02-24e1000: Support RX-FCS flag.Ben Greear
This allows the NIC to pass the Ethernet Frame Checksum (FCS) up the stack. Useful when sniffing packets. Signed-off-by: Ben Greear <greearb@candelatech.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-24e1000: Support sending custom Ethernet CRC.Ben Greear
Good for testing the RX logic for bad CRC handling. Signed-off-by: Ben Greear <greearb@candelatech.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-24e1000e: Support RXALL feature flag.Ben Greear
This allows the NIC to receive all frames available, including those with bad FCS, un-matched vlans, ethernet control frames, and more. Tested by sending frames with bad FCS. Signed-off-by: Ben Greear <greearb@candelatech.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-24e1000e: Support sending custom Ethernet CRC.Ben Greear
This can aid with testing the RX logic for bad CRCs. Signed-off-by: Ben Greear <greearb@candelatech.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-24e1000e: Support RXFCS feature flag.Ben Greear
This enables enabling/disabling reception of the Ethernet FCS. This can be useful when sniffing packets. For e1000e, enabling RXFCS can change the default behaviour for how the NIC handles CRC. Disabling RXFCS will take the NIC back to defaults, which can be configured as part of the module options. Signed-off-by: Ben Greear <greearb@candelatech.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-02-24davinci_mdio: Correct bitmask for clock divider valueChristian Riesch
The CLKDIV bitfield in the MDIO Control Register is a 16 bit field, therefore the CLKDIV value may range from 0 to 0xffff. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24davinci_cpdma: Fix channel number written to teardown registersChristian Riesch
chan->chan_num is 0..CPDMA_MAX_CHANNELS-1 for tx channels and CPDMA_MAX_CHANNELS..2*CPDMA_MAX_CHANNELS-1 for rx channels. However, the rx and tx teardown registers expect zero based channel numbering. Since the upper bits of the registers are reserved, the teardown also worked before, this patch is cleanup only. Signed-off-by: Christian Riesch <christian.riesch@omicron.at> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24be2net: update driver versionSathya Perla
Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24be2net: enable RSS for ipv6 pktsSathya Perla
Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24be2net: reset queue address after freeingSathya Perla
This will prevent double free in some cases where be_clear() is called for cleanup when be_setup() fails half-way. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24be2net: fix tx completion cleanupSathya Perla
As a part of be_close(), instead of waiting for a max of 200ms for each TXQ, wait for a total of 200ms for completions from all TXQs to arrive. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-24be2net: cancel be_worker during EEH recoverySathya Perla
EEH recovery involves ring cleanup and re-creation. The worker thread must not run during EEH cleanup/resume. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-23Staging: et131x: unify return value of .ndo_set_mac_address if address is ↵Danny Kukawka
invalid Unify return value of .ndo_set_mac_address if the given address isn't valid. Return -EADDRNOTAVAIL as eth_mac_addr() already does if is_valid_ether_addr() fails. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-23mcs7830: unify return value of .ndo_set_mac_address if address is invalidDanny Kukawka
Unify return value of .ndo_set_mac_address if the given address isn't valid. Return -EADDRNOTAVAIL as eth_mac_addr() already does if is_valid_ether_addr() fails. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-23ethernet: unify return value of .ndo_set_mac_address if address is invalidDanny Kukawka
Unify return value of .ndo_set_mac_address if the given address isn't valid. Return -EADDRNOTAVAIL as eth_mac_addr() already does if is_valid_ether_addr() fails. Signed-off-by: Danny Kukawka <danny.kukawka@bisect.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-23Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next
2012-02-23tg3: Create timer helper functionsMatt Carlson
This patch seeks to clean up the timer related code. It begins by moving one-time timer setup code from tg3_open() to tg3_init_one(). It then creates a function that encapsulates the code needed to start the timer. A tg3_timer_stop() function was added for parity. Finally, this patch moves all the timer functions to a more suitable location. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-23tg3: Clear RECOVERY_PENDING with reset_task_cancelMatt Carlson
If an error happens in the tx completion thread, tg3_reset_task will be scheduled and TX_RECOVERY_PENDING will be set. The TX_RECOVERY_PENDING flag causes tg3_poll[_msix] to return early before doing much of its work. Tg3_reset_task() gets canceled when the configuration of the device is changing, which always results in a chip reset. When this happens, the TX_RECOVERY_PENDING flag may be left set, which would unnecessarily hinder tg3_poll from doing work. This patch fixes the problem. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-23tg3: Remove SPEED_UNKNOWN checksMatt Carlson
tg3_phy_copper_begin() has code that configures the link advertisements through the use of the link_config.speed and link_config.duplex members. The driver does not internally use these members in this way, nor is it (currently) permitted via the ethtool interface. This patch removes the dead code. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-23tg3: Fix link check in tg3_adjust_linkMatt Carlson
The tg3 driver tried to detect link changes by comparing the tg3 local active_speed member with SPEED_UNKNOWN (or formerly SPEED_INVALID). This check is not correct, since phylib will never set its speed member to either of these two values. The code only appeared to work because tg3 initializes active_speed to SPEED_INVALID during tg3_init_one. This patch introduces a new "old_link" tg3 member and then compares the phy_device's link member against it to detect link state changes. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-02-23sfc: Correct efx_for_each_possible_channel_tx_queue() to skip non-TX channelsBen Hutchings
efx_for_each_possible_channel_tx_queue() should do nothing for RX-only or extra channels. The current definition results in allocating additional unused hardware TX queues when using the mqprio qdisc and either separate_tx_channels or SR-IOV. Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
generated by cgit v0.10.2 at 2024-11-17 20:07:36 (GMT)