summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2011-04-07be2net: dynamically allocate adapter->vf_cfgAjit Khaparde
Instead of a fixed sized array for vf_cfg, allocate the size dynamically depending on number of VFs the device supports. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-07be2net: fix to get max VFs supported from adapterAjit Khaparde
The user supplied num_vfs value need not be compared against a static BE_MAX_VF, but can be checked against the actual VFs that the device can support. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-07be2net: use common method to check for sriov function typeAjit Khaparde
Lancer and BE can both use SLI_INTF_REG to check a VF or a PF. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-07be2net: add rxhash supportAjit Khaparde
Add rxhash support, Based on initial work by Eric Dumazet. Cc: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-07Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/benet/be_main.c
2011-04-06ewrk3: convert to set_phys_idstephen hemminger
Use ethtool infrastructure for blinking, which is now does locking at higher level. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: convert to set_phys_idstephen hemminger
Convert driver to use new ethtool set_phys_id. Not completely sure that this is correct for all cases of device up/down and doing operation. Compile tested only. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06net: netxen: convert to hw_featuresMichał Mirosław
Rather simple conversion to hw_features. Signed-off-by: Michał Mirosław <mirq-linux@rere.qmqm.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06capi: Perform scheduled capifs removalJan Kiszka
udev fully replaces this special file system that only contains CAPI NCCI TTY device nodes. User space (pppdcapiplugin) works without noticing the difference. Signed-off-by: Jan Kiszka <jan.kiszka@web.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06Signed bit field; int have_hotplug_status_watch:1Ian Campbell
Fixes error from sparse: CHECK drivers/net/xen-netback/xenbus.c drivers/net/xen-netback/xenbus.c:29:40: error: dubious one-bit signed bitfield int have_hotplug_status_watch:1; Reported-by: Dr. David Alan Gilbert <linux@treblig.org> Signed-off-by: Ian Campbell <ian.campbell@citrix.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06be2net: Fix suspend/resume operationPadmanabh Ratnakar
eq_next_idx is not getting reset to zero during suspend. This causes resume to fail. Added the fix. Signed-off-by: Sarveswara Rao Mygapula <sarveswararao.mygapula@emulex.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06be2net: Rename some struct members for clarityPadmanabh Ratnakar
Renamed msix_vec_idx to eq_idx in be_eq_obj struct. Renamed msix_vec_next_idx to eq_next_idx in be_adapter structure. These members are used in INTX mode also. Signed-off-by: Sarveswara Rao Mygapula <sarveswararao.mygapula@emulex.com> Signed-off-by: Padmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06s2io: convert to set_phys_id (v2)stephen hemminger
Convert to new ethtool set physical id model. Remove no longer used timer, and fix docbook comment. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06niu: convert to new ethtool set_phys_idstephen hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06pcnet32: convert to set_phys_idstephen hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06benet: convert to set_phys_idstephen hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06bnx2x: convert to set_phys_idstephen hemminger
Also cleanup error codes to no lie about things that driver doesn't support. If device is down report -EAGAIN (same as Broadcom), and if port doesn't blink then error as well. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06bnx2: convert to set_phys_idstephen hemminger
In this case, need to add element to device private to hold original led state. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06vxge: convert to set_phys_idstephen hemminger
Also fix up incorrect docbook comment Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06cxgb3: implement set_phys_idstephen hemminger
Implement new ethtool set_phys_id on Chelsio cxgb3 board. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: implement ethtool set_phys_idstephen hemminger
Implement control of LED via set_phys_id. Note: since PHY is powered off if device is down, this board only allows blinking if device is up. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06skge: implement set_phys_idstephen hemminger
Implement set_phys_id led control on SysKonnect board. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06sky2: support ethtool set_phys_idstephen hemminger
Use ethtool set_phys_id to control LED. Fixes issues with RTNL being held for extended periods. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06pppoe: drop PPPOX_ZOMBIEs in pppoe_flush_devUlrich Weber
otherwise we loop forever if a PPPoE socket was set to PPPOX_ZOMBIE state by a PADT message when the ethernet device is going down afterwards. Signed-off-by: Ulrich Weber <uweber@astaro.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2011-04-06qlcnic: Update version number to 5.0.16Anirban Chakraborty
Bumped up version number to 5.0.16 Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Fix LRO disableRajesh Borundia
o In dev->open LRO was enabled by default, enable it depending upon netdev->features , kernel may have disabled it. o Configure LRO when interface is up. Signed-off-by: Rajesh Borundia <Rajesh.Borundia@qlogic.com> Signed-off-by: Anirban Chakraborty <Anirban.Chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Use flt method to determine flash fw regionSritej Velaga
Use flash layout table to get flash fw starting address and its size. If that fails, use legacy method. Signed-off-by: Sritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Remove unused codeAnirban Chakraborty
Cleaned up unused codes for interrupt coalescence settings Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Changes to VLAN codeAnirban Chakraborty
Made changes to VLAN code comply with new VLAN infrastructure in kernel Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Code optimization patchAnirban Chakraborty
Optimized code resulted in achieving lower CPU utilization on transmit path and higher throughput for small packet sizes (64 bytes). Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Cleanup patchAnirban Chakraborty
1. Changed adapter structure to move away from embedding hardware and receive context structs and use pointers to those objects 2. Packed all the structs that interface with FW 3. Removed unused code and structs Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Memory leak fixSony Chacko
Fix a memory leak in error path of pci info. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06qlcnic: Make PCI info available in all modesSony Chacko
Before this fix, PCI info was available only when multiple NIC functions are present on the same port. Signed-off-by: Sony Chacko <sony.chacko@qlogic.com> Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06be2net: Fix a potential crash during shutdown.Ajit Khaparde
adapter could remain uninitialized if probe fails for some reason. A null pointer access could cause a crash if be_shutdown is called after that. Signed-off-by: Ajit Khaparde <ajit.khaparde@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06bna: Fix for handling firmware heartbeat failureRasesh Mody
This patch contains a fix for gracefully handling firmware heartbeat failure instead of forcing panic. Signed-off-by: Debashis Dutt <ddutt@brocade.com> Signed-off-by: Rasesh Mody <rmody@brocade.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06Merge branch 'for-davem' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/bwh/sfc-next-2.6
2011-04-06can: mcp251x: Allow pass IRQ flags through platform data.Enric Balletbo i Serra
When an interrupt occurs, the INT pin is driven low by the MCP251x controller (falling edge) but in some cases the INT pin can be connected to the MPU through a transistor or level translator which inverts this signal. In this case interrupt should be configured in rising edge. This patch adds support to pass the IRQ flags via mcp251x_platform_data. Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Acked-by: Wolfgang Grandegger <wg@grandegger.com> Acked-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06smsc911x: fix mac_lock acquision before calling smsc911x_mac_readEnric Balletbo i Serra
When SMSC911X_SAVE_MAC_ADDRESS flag is enabled the driver calls smsc911x_mac_read and smsc911x_mac_read function without acquiring mac_lock spinlock This patch fixes following warning smsc911x: Driver version 2008-10-21. ------------[ cut here ]------------ WARNING: at drivers/net/smsc911x.c:261 smsc911x_mac_read+0x24/0x220() Modules linked in: [<c0060858>] (unwind_backtrace+0x0/0xe0) from [<c009322c>] (warn_slowpath_common+0x4c/0x64) [<c009322c>] (warn_slowpath_common+0x4c/0x64) from [<c009325c>] (warn_slowpath_null+0x18/0x1c) [<c009325c>] (warn_slowpath_null+0x18/0x1c) from [<c0324bec>] (smsc911x_mac_read+0x24/0x220) [<c0324bec>] (smsc911x_mac_read+0x24/0x220) from [<c0434788>] (smsc911x_read_mac_address+0x18/0x6c) [<c0434788>] (smsc911x_read_mac_address+0x18/0x6c) from [<c0434c74>] (smsc911x_drv_probe+0x498/0x1788) [<c0434c74>] (smsc911x_drv_probe+0x498/0x1788) from [<c02d3e54>] (platform_drv_probe+0x14/0x18) [<c02d3e54>] (platform_drv_probe+0x14/0x18) from [<c02d2d60>] (driver_probe_device+0xc8/0x184) [<c02d2d60>] (driver_probe_device+0xc8/0x184) from [<c02d2e84>] (__driver_attach+0x68/0x8c) [<c02d2e84>] (__driver_attach+0x68/0x8c) from [<c02d1fc8>] (bus_for_each_dev+0x48/0x74) [<c02d1fc8>] (bus_for_each_dev+0x48/0x74) from [<c02d2660>] (bus_add_driver+0x9c/0x228) [<c02d2660>] (bus_add_driver+0x9c/0x228) from [<c02d3598>] (driver_register+0xa0/0x124) [<c02d3598>] (driver_register+0xa0/0x124) from [<c0050668>] (do_one_initcall+0x94/0x168) [<c0050668>] (do_one_initcall+0x94/0x168) from [<c0008984>] (kernel_init+0xa0/0x154) [<c0008984>] (kernel_init+0xa0/0x154) from [<c005afac>] (kernel_thread_exit+0x0/0x8) ---[ end trace 2c931a35b7885770 ]--- Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: Support 4mb flash sizes for 5717 and 5719Matt Carlson
If a 5717 or 5719 NVRAM part is manually strapped and is 2mb in size, the driver needs to look at the NVRAM size field rather than infer it from the strapping itself. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: Enable 5720 supportMatt Carlson
This patch adds the 5720 device ID to the PCI table, thus enabling 5720 support. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: Add 5720 PHY IDMatt Carlson
This patch adds the 5720 PHY ID. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: Add 5720 H2BMC supportMatt Carlson
This patch adds support for the new Host to BMC feature. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: Add 5720 NVRAM decodingMatt Carlson
The 5720 implements its own NVRAM pin strapping scheme. This patch adds the required support. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: Add 5720 ASIC revMatt Carlson
This patch adds support for the 5720 ASIC rev. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Reviewed-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: Reintroduce 5717_PLUSMatt Carlson
This patch reintroduces the TG3_FLG3_5717_PLUS to identify 5717 and later devices. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: 5717_PLUS => 57765_PLUSMatt Carlson
The 57765 arrived before the 5717 and has a subset of the features supported by the 5717. This patch renames the 5717_PLUS flag so that it can be reintroduced to designate only 5717 and later devices. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-06tg3: Cleanup extended rx ring size codeMatt Carlson
Hardcoded values are used in multiple places to describe the maximum rx ring sizes. This patch replaces those values with preprocessor constants. This patch also introduces a new TG3_FLG3_LRG_PROD_RING_CAP to determine if the device is capable of supporting larger ring sizes. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2011-04-05sfc: Implement ethtool_ops::set_phys_id instead of ethtool_ops::phys_idBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
2011-04-05sfc: Implement generic features interfaceBen Hutchings
Signed-off-by: Ben Hutchings <bhutchings@solarflare.com>
generated by cgit v0.10.2 at 2024-11-09 16:27:37 (GMT)