summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2013-02-22[SCSI] qla2xxx: Do link initialization on get loop id failure.Joe Carnuccio
To avoid continually doing ISP resets when get loop id fails to obtain the adapter loop id, first try to do a link initialization. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] qla2xxx: Update the FTP site references in the driver sources.Giridhar Malavali
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] qla2xxx: Reject loopback request if one is already in progress.Chad Dupuis
If another function on the port has initiated a loopback operation do not process the current request. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] qla2xxx: Print thermal unsupported message.Joe Carnuccio
When the Read SFP mailbox command fails on the thermal device, print a message explaining that thermal is not supported. Signed-off-by: Joe Carnuccio <joe.carnuccio@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] qla2xxx: Avoid null pointer dereference in shutdown routine.Masanari Iida
Signed-off-by: Masanari Iida <standby24x7@gmail.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] qla2xxx: Get VPD information from common location for CNA.Saurav Kashyap
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] qla2xxx: Correct race in loop_state assignment during reset handling.Andrew Vasquez
There's a subtle race in the loop/bus-reset handling whereby a VHA's loop-state can get incorrectly set to 'down' after the loop-reset and firmware's completion of link re-negotiation. The original code incorrectly assumes that firmware AENs would arrive only after mailbox-command execution to initiate the link-flap. Here's a good case with the old code (AENs arrive after mailbox-command completion): qla2xxx [0000:03:00.1]-8012:91: BUS RESET ISSUED nexus=91:0:4. qla2xxx [0000:03:00.1]-287d:91: FCPort state transitioned from ONLINE to LOST - portid=010100. qla2xxx [0000:03:00.1]-580e:91: Asynchronous P2P MODE received. qla2xxx [0000:03:00.1]-287d:91: FCPort state transitioned from ONLINE to LOST - portid=010400. qla2xxx [0000:03:00.1]-802b:91: BUS RESET SUCCEEDED nexus=91:0:4. qla2xxx [0000:03:00.1]-480b:91: Reset marker scheduled. qla2xxx [0000:03:00.1]-5812:91: Port database changed ffff 0006 0000. qla2xxx [0000:03:00.1]-505f:91: Link is operational (4 Gbps). qla2xxx [0000:03:00.1]-480c:91: Reset marker end. qla2xxx [0000:03:00.1]-480f:91: Loop resync scheduled. qla2xxx [0000:03:00.1]-8837:91: F/W Ready - OK. qla2xxx [0000:03:00.1]-883a:91: fw_state=3 (7, 0, 0, 0) curr time=170b8f315. qla2xxx [0000:03:00.1]-280e:91: HBA in F P2P topology. qla2xxx [0000:03:00.1]-2812:91: qla2x00_configure_hba success qla2xxx [0000:03:00.1]-2814:91: Configure loop -- dpc flags = 0x5260. notice how the 'Port database changed' (8014) arrived after the bus-reset handler completed 'BUS RESET SUCCEEDED'. Now, here's a failing case with the old code (AENs arrive before mailbox-command completion): qla2xxx [0000:03:00.1]-8012:91: BUS RESET ISSUED nexus=91:0:0. qla2xxx [0000:03:00.1]-580e:91: Asynchronous P2P MODE received. qla2xxx [0000:03:00.1]-287d:91: FCPort state transitioned from ONLINE to LOST - portid=010100. qla2xxx [0000:03:00.1]-287d:91: FCPort state transitioned from ONLINE to LOST - portid=010400. qla2xxx [0000:03:00.1]-4800:91: DPC handler sleeping. qla2xxx [0000:03:00.1]-5812:91: Port database changed ffff 0006 0000. qla2xxx [0000:03:00.1]-505f:91: Link is operational (4 Gbps). qla2xxx [0000:03:00.1]-802b:91: BUS RESET SUCCEEDED nexus=91:0:0. qla2xxx [0000:03:00.1]-480b:91: Reset marker scheduled. qla2xxx [0000:03:00.1]-480c:91: Reset marker end. qla2xxx [0000:03:00.1]-480f:91: Loop resync scheduled. qla2xxx [0000:03:00.1]-8837:91: F/W Ready - OK. qla2xxx [0000:03:00.1]-883a:91: fw_state=3 (7, 0, 0, 0) curr time=170be9eb2. qla2xxx [0000:03:00.1]-280e:91: HBA in F P2P topology. qla2xxx [0000:03:00.1]-2812:91: qla2x00_configure_hba success qla2xxx [0000:03:00.1]-2814:91: Configure loop -- dpc flags = 0x5260. qla2xxx [0000:03:00.1]-281e:91: Needs RSCN update and loop transition. qla2xxx [0000:03:00.1]-286a:91: qla2x00_configure_loop *** FAILED ***. qla2xxx [0000:03:00.1]-4810:91: Loop resync end. qla2xxx [0000:03:00.1]-4800:91: DPC handler sleeping. This race would ultimately lead to devices go unexpectedly offline until another link-flap or chip-reset would cause driver re-discovery to take place. Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] qla2xxx: Correction to the message ids.Saurav Kashyap
Signed-off-by: Giridhar Malavali <giridhar.malavali@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] qla2xxx: Prevent enabling target mode for unsupported HBAs.Arun Easi
Signed-off-by: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] qla2xxx: Allow ISP81xx to create ATIO queues.Arun Easi
Signed-off-by: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] qla2xxx: Enable target mode support for ISP83xx.Arun Easi
Signed-off-by: Arun Easi <arun.easi@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] qla2xxx: Ramp down queue depth for attached SCSI devices when driver ↵Chad Dupuis
resources are low. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] qla2xxx: Determine the number of outstanding commands based on ↵Chad Dupuis
available resources. Base the number of outstanding requests the driver will keep track of on the available resources instead of being hard-coded. Signed-off-by: Chad Dupuis <chad.dupuis@qlogic.com> Signed-off-by: Saurav Kashyap <saurav.kashyap@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] libosd: check for kzalloc() failureDan Carpenter
There wasn't any error handling for this kzalloc(). Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] qla4xxx: don't free NULL dma poolDan Carpenter
The error path calls dma_pool_free() on this path but "chap_table" is NULL and "chap_dma" is uninitialized. It's cleaner to just return directly. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-22[SCSI] mvsas: fixed timeout issue when removing moduleXiangliang Yu
Root cause is libsas will clear asd_sas_port phy_mask value in sas_port_deform after triggering destruct workqueue, but the workqueue will send sync cmd and still need phy_mask value. Now, mvsas using asd_sas_phy setting instead of asd_sas_port setting. Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] aacraid: 1024 max outstanding command support for Series 7 and aboveMahesh Rajashekhara
Signed-off-by: Mahesh Rajashekhara <Mahesh_Rajashekhara@pmc-sierra.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] bnx2fc: adjust duplicate testJulia Lawall
Delete successive tests to the same location. The code tested the result of a previous allocation, that itself was already tested. It is changed to test the result of the most recent allocation. A simplified version of the semantic match that finds this problem is as follows: (http://coccinelle.lip6.fr/) // <smpl> @s exists@ local idexpression y; expression x,e; @@ *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } ... when != \(y = e\|y += e\|y -= e\|y |= e\|y &= e\|y++\|y--\|&y\) when != \(XT_GETPAGE(...,y)\|WMI_CMD_BUF(...)\) *if ( \(x == NULL\|IS_ERR(x)\|y != 0\) ) { ... when forall return ...; } // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Update driver version to 5.03.00-k4Vikas Chaudhary
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Fix return code for qla4xxx_session_get_param.Manish Rangankar
While reading sysfs chap_in_idx and chap_out_idx attribute, if chap authentication is not set we get an error as "Invalid argument". Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: wait for boot target login response during probe.Manish Rangankar
Boot from SAN fails in some cases where boot target login response is slow. In this case, probe finishes early and triggers init, which doesn't find remote disk to mount root which leads to BFS failure. Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Added support for force firmware dumpVikas Chaudhary
This patch force driver to collect firmware dump using following command:- "echo 2 > /sys/class/scsi_host/hostX/device/fw_dump" Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Re-register IRQ handler while retrying initialize of adapterPoornima Vonti
Problem: If initialization of adapter fails for some reason, then the interrupt handlers are released. The interrupt handlers are not registered again when initialization of adapter is retried. Solution: Re-register the interrupt handler when adapter initialization is retried. Signed-off-by: Poornima Vonti <poornima.vonti@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Throttle active IOCBs to firmware limitsKaren Higgins
Problem: QLA4xxx firmware may assert if given more IOCBs than it can handle. Solution: The driver was updated to throttle the number of active IOCBs based on the total number of IOCB buffers received from get_firmware_status mbx_sts[2]. Signed-off-by: Karen Higgins <karen.higgins@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Remove unnecessary code from qla4xxx_init_local_dataKaren Higgins
Removed unnecessary calls to qla4xxx_get_firmware_status from function qla4xxx_init_local_data Signed-off-by: Karen Higgins <karen.higgins@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Quiesce driver activities while loopbackNilesh Javali
Quiesce all different activities performed by driver upon the link events while loopback diagnostics is in progress. Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Rename MBOX_ASTS_IDC_NOTIFY to ↵Nilesh Javali
MBOX_ASTS_IDC_REQUEST_NOTIFICATION Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Add spurious interrupt messages under debug level 2Nilesh Javali
The spurious interrupt messages are seen when interrupt lines are shared between different adapters or modules. Example, interrupt lines are shared between qlcnic and qla4xxx and USB modules, then the console is flooded with flurry of spurious interrupt messages which are expected in such scenario. Hence put these messages under debug level 2 for INTx interrupt mode. Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] cxgb4i: Remove the scsi host device when removing deviceThadeu Lima de Souza Cascardo
When doing a hotplug remove of a cxgb4 device, there are still dandling symlinks at /sys/class/scsi_host/hostX to the removed PCI device. The upper layer device may also try to send data, which may crash the system. The DETACH message from the lower level driver is sent to the ULD when the device is removed, when the scsi host should be removed from the system, avoiding any problems. After this patch, there are no more dangling symlinks and many attempts to crash the system while there is SCSI activity and removing the device have failed. Adding the device back again works as expected, with the scsi hosts showing up again. Based on a patch by Karen Xie. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Cc: Karen Xie <kxie@chelsio.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] bfa: fix strncpy() limiter in bfad_start_ops()Dan Carpenter
The closing parenthesis is in the wrong place so it takes the sizeof a pointer instead of the sizeof the buffer minus one. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Anil Gurumurthy <agurumur@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Update driver version to 5.03.00-k3Vikas Chaudhary
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Correct the validation to check in get_sys_info mailboxNilesh Javali
Check mbox_sts[3] instead of mbox_sts[4] for ISP83xx to validate size of data returned Signed-off-by: Nilesh Javali <nilesh.javali@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] qla4xxx: Pass correct function param to qla4_8xxx_rd_directVikas Chaudhary
Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] lpfc 8.3.37: Update lpfc version for 8.3.37 driver releaseJames Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] lpfc 8.3.37: Fixed infinite loop in lpfc_sli4_fcf_rr_next_index_get.James Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] lpfc 8.3.37: Fixed crash due to SLI Port invalid resource countJames Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] lpfc 8.3.37: Provide support for FCoE protocol dual-chute (ULP) operationJames Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] lpfc 8.3.37: Fixed stale ndlp state when the node is marked for ↵James Smart
deferred removal. Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] lpfc 8.3.37: Fix potential memory corruption bugJames Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] lpfc 8.3.37: Fixed no-context ABTS failed with BA_RJTJames Smart
Fixed no-context ABTS received on unsolicited receive queue failed with BA_RJT Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] lpfc 8.3.37: Removed use of NOP mailboxes for interrupt verificationJames Smart
Removed use of NOP mailboxes for interrupt verification in pci_probe_one_s4 Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] lpfc 8.3.37: Fixed exhausted retry for plogi to nameserver.James Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] lpfc 8.3.37: Fixed ELS_REC received on the unsolicited receive queueJames Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-30[SCSI] lpfc 8.3.37: Provide support for change_queue_typeJames Smart
Signed-off-by: James Smart <james.smart@emulex.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-29[SCSI] ipr: Fix sparse error in ipr driverwenxiong@linux.vnet.ibm.com
This patch fixes the following sparse error: CHECK drivers/scsi/ipr.c spinlock.h:147:9: warning: context imbalance in 'ipr_reset_reload' - unexpected unlock Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-29[SCSI] ipr: Driver version 2.6.0wenxiong@linux.vnet.ibm.com
Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-29[SCSI] ipr: Implement block iopollwenxiong@linux.vnet.ibm.com
This patch implements blk iopoll in ipr driver for performance improvement. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-29[SCSI] ipr: Reduce lock contentionwenxiong@linux.vnet.ibm.com
This patch reduces lock contention while implementing distributed completion processing. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-29[SCSI] ipr: Add support for MSI-X and distributed completionwenxiong@linux.vnet.ibm.com
The new generation IBM SAS Controllers will support MSI-X interrupts and Distributed Completion Processing features. This patch add these support in ipr device driver. Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Acked-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-29[SCSI] ipr: Resource path error logging cleanupBrian King
The resource path as displayed by the ipr driver is the location string identifying a location on the SAS fabric. This patch adds the SCSI host number such that error logs can be more easily correlated in multiple adapter configurations. Signed-off-by: Brian King <brking@linux.vnet.ibm.com> Signed-off-by: Wen Xiong <wenxiong@linux.vnet.ibm.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
generated by cgit v0.10.2 at 2024-11-06 05:38:42 (GMT)