summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2005-10-28[PATCH] Owner field additions to many i2c drivers, 4 of 5Laurent Riffard
This patch updates the .owner field for the i2c core struct xxxx_driver variables. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] Owner field additions to many i2c drivers, 3 of 5Laurent Riffard
This patch updates the .owner field for various struct xxxx_driver variables which are available on PPC_MAC arch. This one was _not_ even compile-tested... Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] Owner field additions to many i2c drivers, 2 of 5Laurent Riffard
This patch updates the .owner field for various struct xxxx_driver variables, other than pci_driver. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Jean Delvare <khali@linux-fr> Acked-by: Mark A. Greer <mgreer@mvista.com> Acked-by: Ben Dooks <ben-linux@fluff.org> Acked-by: Deepak Saxena <dsaxena@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] Owner field additions to many i2c drivers, 1 of 5Laurent Riffard
This patch updates .owner field for various struct pci_driver variables. Signed-off-by: Laurent Riffard <laurent.riffard@free.fr> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] i2c: Big i2c-elektor cleanupStig Telfer
Cleanups to the i2c-elektor driver: * Set the i2c_adapter name field to "i2c-elektor" and use this string in all resource requests and printks. * Change space-padding for tab indentation, kill trailing white space, remove space before comma. * Use dev_info, pr_info and pr_debug instead of printk. * Lines chopped to 80 columns. Signed-off-by: Stig Telfer <stig@lizardlogic.co.uk> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] i2c: Fix i2c-elektor on AlphaStig Telfer
This patch updates the i2c-elektor driver, enabling it to compile cleanly, load and run. The key change is that it uses the new __iomem/iowrite8/ioread8 functions to abstract the direct or memory-mapped variants of register access. Also, the original driver would crash on module load on the Alpha because the PCI memory region was not remapped into kernel memory. I have managed the following testing: * compiled and tested it on my Alpha UP2000+ system. * compiles cleanly for x86 but I don't have the hardware to test. Signed-off-by: Stig Telfer <stig@lizardlogic.co.uk> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] i2c: Drop meaningless use of I2C_DF_NOTIFY in i2c_client structuresJean Delvare
I2C_DF_NOTIFY is an i2c_driver flag, using it as an i2c_client flag doesn't make any sense. Signed-off-by: Jean Delvare <khali@linux-fr.org> Acked-by: Mark A. Greer <mgreer@mvista.com> Acked-by: Randy Vinson <rvinson@mvista.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] i2c: Rename i2c-parport variable to avoid confusionJean Delvare
It's a bit confusing to name a variable the same as an unrelated structure. The compiler doesn't complain, but it certainly makes the code harder to understand, and could confuse grep and LXR among others. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] i2c: Drop I2C_SMBUS_I2C_BLOCK_MAXJean Delvare
Drop I2C_SMBUS_I2C_BLOCK_MAX, use I2C_SMBUS_BLOCK_MAX instead. I2C_SMBUS_I2C_BLOCK_MAX has always been defined to the same value as I2C_SMBUS_BLOCK_MAX, and this will never change: setting it to a lower value would make no sense, setting it to a higher value would break i2c_smbus_data compatibility. There is no point in changing i2c_smbus_data to support larger block transactions in SMBus mode, as no SMBus hardware supports more than 32 byte blocks. Thus, for larger transactions, direct I2C transfers are the way to go. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] hwmon: Drop useless w83627hf initialization stepJean Delvare
Drop a useless initialization step in the w83627hf driver. The comment says that the W83627HF PWM2 can be disabled, but it can't. I suppose this is a leftover from the w83781d driver (from which the w83627hf driver is derived), as for example the W83782D had the ability to disable PWM2. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] hwmon: Drop legacy ISA address support from it87Jean Delvare
Drop legacy ISA address support from the it87 driver. All supported chips are Super-I/O chips, so the device ISA address can be safely read from Super-I/O space rather than blindly assumed. Two nearby inaccurate documentation statements have been fixed as well: * The IT8705F doesn't have an SMBus interface. * The SiS950 doesn't have a distinct prefix. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] i2c: Cleanup i2c-i801 ifdefsJean Delvare
No more need to check for PEC support being available now that both the i2c-core and the i2c-i801 drivers are part of the Linux kernel source tree. It's just there. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] hwmon: Fix w83627ehf/hf vs PNPACPI conflict (bug #4014)Petr Vandrovec
This patch changes w83627hf and w83627ehf drivers to reserve only ports 0x295-0x296, instead of full 0x290-0x297 range. While some other sensors chips respond to all addresses in 0x290-0x297 range, Winbond chips respond to 0x295-0x296 only (this behavior is implied by documentation, and matches behavior observed on real systems). This is not problem alone, as no BIOS was found to put something at these unused addresses, and sensors chip itself provides nothing there as well. But in addition to only respond to these two addresses, also BIOS vendors report in their ACPI-PnP structures that there is some resource at I/O address 0x295 of length 2. And when later this hwmon driver attempts to request region with base 0x290/length 8, it fails as one request_region cannot span more than one device. Due to this we have to ask only for region this hardware really occupies, otherwise driver cannot be loaded on systems with ACPI-PnP enabled. Signed-off-by: Petr Vandrovec <vandrove@vc.cvut.cz> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] i2c: Cleanup i2c-dev ioctl debug messageJean Delvare
Cleanup the ioctl debug message in i2c-dev. In particular, the minor number is redundant now that the minor number and the adapter number are kept in sync. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] i2c: Add missing i2c-ixp2000/4xx adapter nameJean Delvare
The ixp4xx and ixp2000 i2c bus drivers omit to fill the required i2c_adapter name field. Copy the device driver name field there. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Deepak Saxena <dsaxena@plexity.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] i2c-viapro: Cleanup ifdef usageGreg KH
It's not nice to put #ifdef in the middle of functions. CC: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/i2c/busses/i2c-viapro.c | 6 ++---- 1 file changed, 2 insertions(+), 4 deletions(-)
2005-10-28[PATCH] i2c-viapro: Improve register dumpJean Delvare
Improve the register dump used to debug the i2c-viapro driver. The original dump was missing the HSTSTS register and the block data buffer. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/i2c/busses/i2c-viapro.c | 38 ++++++++++++++++++++++++++++++-------- 1 file changed, 30 insertions(+), 8 deletions(-)
2005-10-28[PATCH] i2c-viapro: Refactor control outbJean Delvare
By slightly shifting the interface between vt596_access and vt596_transaction, we can save two I/O accesses per SMBus transaction. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/i2c/busses/i2c-viapro.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-)
2005-10-28[PATCH] i2c-viapro: Update supported devices listJean Delvare
Make it clearer which chips are supported by the i2c-viapro driver, and which support I2C block transactions. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Documentation/i2c/busses/i2c-viapro | 12 ++++++------ drivers/i2c/busses/i2c-viapro.c | 22 +++++++++++++--------- 2 files changed, 19 insertions(+), 15 deletions(-)
2005-10-28[PATCH] i2c-viapro: Code cleanupsJean Delvare
Cleanups to the i2c-viapro driver: * Kill unused defines. * Kill interrupt-related code, as the driver doesn't use interrupts. * Fix broken comments (some copied from i2c-piix4.) * Centralize the unsupported command error case in vt596_access. That way we'll catch all unsupported commands, not only I2C_SMBUS_PROC_CALL. * Refactor some code. * Convert some dev_dbg into dev_err. Errors better be reported even in non-debug mode. * Do not verify that the final reset succeeded. It'll be checked at the beginning of the next transaction anyway. * Use the driver name to reserve the I/O region. * Do not print the contents of the SMBREV register, it reads 0 on all chips I've seen so far. * Some other minor fixes all over the place. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/i2c/busses/i2c-viapro.c | 122 +++++++++++++--------------------------- 1 file changed, 41 insertions(+), 81 deletions(-)
2005-10-28[PATCH] i2c-viapro: Implement I2C Block transactionsJean Delvare
Implement the I2C block transactions on VIA chips which support them: VT82C686B, VT8233, VT8233A, VT8235 and VT8237R. This speeds up EEPROM accesses by a factor 10 or so. I would like to thank Antonino A. Daplas, Hinko Kocevar, Salah Coronya and Andreas Henriksson for their help in testing this new feature. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Documentation/i2c/busses/i2c-viapro | 7 +++++- drivers/i2c/busses/i2c-viapro.c | 39 +++++++++++++++++++++++++++++++++--- 2 files changed, 42 insertions(+), 4 deletions(-)
2005-10-28[PATCH] i2c-viapro: Coding style fixesJean Delvare
Before I go on cleaning up and improving the i2c-viapro driver, let's fix all the coding style issues: mostly trailing white space, and spaces used where tabs should be. Signed-off-by: Jean Delvare <khali@linux-fr> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Documentation/i2c/busses/i2c-viapro | 12 ++--- drivers/i2c/busses/i2c-viapro.c | 76 ++++++++++++++++++------------------ 2 files changed, 43 insertions(+), 45 deletions(-)
2005-10-28[PATCH] i2c: Several PEC-related fixes in software SMBus emulationHideki Iwamoto
Fix several errors in I2C SMBus emulation when PEC is used: * Weird logic error in SMBus Write Word transactions. * Wrong buffer size, affecting SMBus Block Write transactions. * Potential buffer overrun in SMBus Block Write transactions. From: Hideki Iwamoto <h-iwamoto@kit.hi-ho.ne.jp> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/i2c/i2c-core.c | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)
2005-10-28[PATCH] i2c: Minor i2c-amd8111 cleanupJean Delvare
I noticed a useless instruction in the i2c-amd8111 driver. Signed-off-by: Jean Delvare <khali@linux-fr.org> CC: Vojtech Pavlik <vojtech@suse.cz> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/i2c/busses/i2c-amd8111.c | 1 - 1 file changed, 1 deletion(-)
2005-10-28[PATCH] i2c: Adjust i2c_probe() for busses without SMBUS_QUICKJean Delvare
Move the check for SMBUS_QUICK in i2c_probe() after the forced addresses have been handled. This makes it possible for a driver to leave the probed address lists empty, only providing forced addresses, and get i2c_probe to work even if the bus doesn't support SMBUS_QUICK. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/i2c/i2c-core.c | 15 +++++++++++---- 1 file changed, 11 insertions(+), 4 deletions(-)
2005-10-28[PATCH] hwmon: Minor w83l785ts optimizationJean Delvare
Using s8 instead of u8 to store temperature register values saves a few instructions on sysfs file read. The very same was done for several other drivers a while ago (lm63, lm83, lm90...) Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/hwmon/w83l785ts.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
2005-10-28[PATCH] hwmon: w83l785ts converted to dynamic sysfs callbacksJean Delvare
Convert the w83l785ts driver to use dynamic sysfs callbacks. This is a small driver so the benefit is thin, but still worth it. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/hwmon/w83l785ts.c | 36 ++++++++++++++++++------------------ 1 file changed, 18 insertions(+), 18 deletions(-)
2005-10-28[PATCH] i2c: Reuse name strings in i2c bus driversJean Delvare
Clean up name string usage in 12 i2c bus drivers: * Use the i2c_adapter name for requesting the I/O region rather than redefining a new string. * Do not initialize the i2c_adapter name to "unset". This should save a few data bytes here and there. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/i2c/busses/i2c-ali1535.c | 6 +++--- drivers/i2c/busses/i2c-ali1563.c | 6 ++++-- drivers/i2c/busses/i2c-ali15x3.c | 5 +++-- drivers/i2c/busses/i2c-amd756.c | 5 ++--- drivers/i2c/busses/i2c-amd8111.c | 4 +++- drivers/i2c/busses/i2c-i801.c | 4 ++-- drivers/i2c/busses/i2c-nforce2.c | 4 ++-- drivers/i2c/busses/i2c-piix4.c | 4 ++-- drivers/i2c/busses/i2c-sis5595.c | 5 +++-- drivers/i2c/busses/i2c-sis630.c | 6 ++++-- drivers/i2c/busses/i2c-sis96x.c | 5 +++-- drivers/i2c/busses/i2c-via.c | 4 ++-- 12 files changed, 33 insertions(+), 25 deletions(-)
2005-10-28[PATCH] hwmon: Discard bogus comment about init setting limitsJean Delvare
Discard a common out-of-date comment in 5 hardware monitoring drivers. The hardware monitoring chip drivers are no more setting sensor limits at initialization time, for quite some time already. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/hwmon/lm78.c | 1 - drivers/hwmon/via686a.c | 1 - drivers/hwmon/w83627hf.c | 1 - drivers/hwmon/w83781d.c | 1 - drivers/hwmon/w83792d.c | 1 - 5 files changed, 5 deletions(-)
2005-10-28[PATCH] hwmon: Discard explicit static initializations to 0Jean Delvare
Kill explicit static initializations to 0 in 2 hwmon drivers. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/hwmon/adm1021.c | 2 +- drivers/hwmon/via686a.c | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)
2005-10-28[PATCH] i2c: Discard explicit static initializations to 0Jean Delvare
Kill explicit static initializations to 0 in 10 i2c drivers. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/i2c/algos/i2c-algo-pca.c | 2 +- drivers/i2c/algos/i2c-algo-sibyte.c | 2 +- drivers/i2c/busses/i2c-ali15x3.c | 4 ++-- drivers/i2c/busses/i2c-amd756.c | 2 +- drivers/i2c/busses/i2c-iop3xx.c | 2 +- drivers/i2c/busses/i2c-piix4.c | 8 ++++---- drivers/i2c/busses/i2c-sis5595.c | 4 ++-- drivers/i2c/busses/i2c-sis630.c | 2 +- drivers/i2c/busses/i2c-sis96x.c | 2 +- drivers/i2c/busses/i2c-via.c | 2 +- 10 files changed, 15 insertions(+), 15 deletions(-)
2005-10-28[PATCH] hwmon: Do not forcibly enable via686a by defaultJean Delvare
Do not enable the VIA VT82C686A/B integrated sensors by default, as disabled sensors usually means that this feature is not used so the values won't make any sense. This has been confusing many users in the past: http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=1786 http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=1811 http://www2.lm-sensors.nu/~lm78/readticket.cgi?ticket=2052 It is still possible to forcibly enable the sensors by using the force_addr module parameter. Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> Documentation/hwmon/via686a | 17 +++++++++++++++-- drivers/hwmon/via686a.c | 18 +++++++++++------- 2 files changed, 26 insertions(+), 9 deletions(-)
2005-10-28[PATCH] hwmon: adm9240 whitespace cleanupsJean Delvare
This whitespace cleanup patch removes one trailing space and breaks lines longer than 80 characters. Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de> drivers/hwmon/adm9240.c | 33 +++++++++++++++++++++------------ 1 file changed, 21 insertions(+), 12 deletions(-)
2005-10-28[PATCH] hwmon: via686a: save 0.5k by long v[256] -> s16 v[256]Jean Delvare
We can save 0.5kB of data in the via686a driver. From: Denis Vlasenko <vda@ilport.com.ua> Signed-off-by: Jean Delvare <khali@linux-fr.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] hwmon: adm9240 driver update - dynamic sysfsGrant Coady
hwmon: adm9240 update 2/2: convert to use dynamic sysfs accessors This patch converts adm9240 to use Yani Ioannou's dynamic sysfs callbacks, reducing driver memory footprint from 16312 to 14104 bytes on 2.6.14-rc1, removing the old driver macro mess. Run tested on Intel SE440BX-2 mobo. Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] hwmon: adm9240 driver update - cleanupsGrant Coady
hwmon: adm9240 update 1/2: cleanups: o remove i2c read/write wrapper interface as it does nothing, o change kmalloc + memset to kzalloc Signed-off-by: Grant Coady <gcoady@gmail.com> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28Merge master.kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6Linus Torvalds
2005-10-28Merge master.kernel.org:/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6Arnaldo Carvalho de Melo
2005-10-28[Bluetooth] Ignore additional interfaces of BPA 100/105 devicesMarcel Holtmann
If a BPA 100/105 device contains more then one interface then ignore the additional interfaces, because they are unused. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2005-10-28[Bluetooth] Cleanup of the HCI UART driverMarcel Holtmann
This patch contains the big cleanup of the HCI UART driver. The uneeded header files are removed and their structure declarations are moved into the protocol implementations. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2005-10-28[Bluetooth] Remove TXCRC compile option for BCSP driverMarcel Holtmann
The TXCRC compile option is not really useful and thus change it into a module parameter. Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
2005-10-28Merge ../bleed-2.6Greg KH
2005-10-28Merge branch 'forlinus' of git://parisc-linux.org/home/kyle/git/parisc-2.6Linus Torvalds
2005-10-28[PATCH] kernel-doc: drivers/base fixesRandy Dunlap
driver/base: add missing function parameters; eliminate all warnings. Signed-off-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] DRIVER MODEL: Get rid of the obsolete tri-level suspend/resume callbacksRussell King
In PM v1, all devices were called at SUSPEND_DISABLE level. Then all devices were called at SUSPEND_SAVE_STATE level, and finally SUSPEND_POWER_DOWN level. However, with PM v2, to maintain compatibility for platform devices, I arranged for the PM v2 suspend/resume callbacks to call the old PM v1 suspend/resume callbacks three times with each level in order so that existing drivers continued to work. Since this is obsolete infrastructure which is no longer necessary, we can remove it. Here's an (untested) patch to do exactly that. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] drivers/base - fix sparse warningsBen Dooks
There are a number of sparse warnings from the latest sparse snapshot being generated from the drivers/base build. The main culprits are due to the initialisation functions not being declared in a header file. Also, the firmware.c file should include <linux/device.h> to get the prototype of firmware_register() and firmware_unregister(). This patch moves the init function declerations from the init.c file to the base.h, and ensures it is included in all the relevant c sources. It also adds <linux/device.h> to the included headers for firmware.c. The patch does not solve all the sparse errors generated, but reduces the count significantly. drivers/base/core.c:161:1: warning: symbol 'devices_subsys' was not declared. Should it be static? drivers/base/core.c:417:12: warning: symbol 'devices_init' was not declared. Should it be static? drivers/base/sys.c:253:6: warning: symbol 'sysdev_shutdown' was not declared. Should it be static? drivers/base/sys.c:326:5: warning: symbol 'sysdev_suspend' was not declared. Should it be static? drivers/base/sys.c:428:5: warning: symbol 'sysdev_resume' was not declared. Should it be static? drivers/base/sys.c:450:12: warning: symbol 'system_bus_init' was not declared. Should it be static? drivers/base/bus.c:133:1: warning: symbol 'bus_subsys' was not declared. Should it be static? drivers/base/bus.c:667:12: warning: symbol 'buses_init' was not declared. Should it be static? drivers/base/class.c:759:12: warning: symbol 'classes_init' was not declared. Should it be static? drivers/base/platform.c:313:12: warning: symbol 'platform_bus_init' was not declared. Should it be static? drivers/base/cpu.c:110:12: warning: symbol 'cpu_dev_init' was not declared. Should it be static? drivers/base/firmware.c:17:5: warning: symbol 'firmware_register' was not declared. Should it be static? drivers/base/firmware.c:23:6: warning: symbol 'firmware_unregister' was not declared. Should it be static? drivers/base/firmware.c:28:12: warning: symbol 'firmware_init' was not declared. Should it be static? drivers/base/init.c:28:13: warning: symbol 'driver_init' was not declared. Should it be static? drivers/base/dmapool.c:174:10: warning: implicit cast from nocast type drivers/base/attribute_container.c:439:1: warning: symbol 'attribute_container_init' was not declared. Should it be static? drivers/base/power/runtime.c:76:6: warning: symbol 'dpm_set_power_state' was not declared. Should it be static? Signed-off-by: Ben Dooks <ben-linux@fluff.org> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] input core: remove custom-made hotplug handlerDmitry Torokhov
Input: remove custom-made hotplug handler Now that all input devices are registered with sysfs we can remove old custom-made hotplug handler and crate a standard one. Signed-off-by: Dmitry Torokhov <dtor@mail.ru> Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] INPUT: Create symlinks for backwards compatibilityGreg Kroah-Hartman
This creates symlinks in /sys/class/input/ to the nested class devices to help userspace cope with the nesting. Unfortunatly udev still needs to be updated as it can't handle symlinks properly here :( Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] INPUT: rename input_dev_class to input_class to be correct.Greg Kroah-Hartman
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-10-28[PATCH] INPUT: remove the input_class structure, as it is unused.Greg Kroah-Hartman
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
generated by cgit v0.10.2 at 2024-11-07 19:37:07 (GMT)