summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-04-23Merge branch 'master' into for-davemJohn W. Linville
Conflicts: drivers/net/wireless/ath/ath9k/phy.c drivers/net/wireless/iwlwifi/iwl-6000.c drivers/net/wireless/iwlwifi/iwl-debugfs.c
2010-04-23bnx2x: add support for receive hashingTom Herbert
Add support to bnx2x to extract Toeplitz hash out of the receive descriptor for use in skb->rxhash. Signed-off-by: Tom Herbert <therbert@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-23sky2: size status ring based on Tx/Rx ringstephen hemminger
Sky2 status ring must be big enough to handle worst case number of status messages. It was being oversized (to handle dual port cards), and excessive number of tx ring entries were allowed. This patch reduces the footprint and makes sure the value is enough. Later patch to add RSS increases the number of possible Rx status elements. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22X25: Use identifiers for hdlc x25 device to x25 interfaceandrew hendry
Change magic numbers to identifiers for X25 interface. Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Acked-by: Krzysztof Halasa <khc@pm.waw.pl> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22X25: Use identifiers for cyclades device to x25 interfaceandrew hendry
Change magic numbers to identifiers for X25 interface. Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22X25: Use identifiers for lapbether device to x25 interfaceandrew hendry
Change magic numbers to identifiers for X25 interface. Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22X25: Use identifiers for x25 async device to x25 interfaceandrew hendry
Change magic numbers to identifiers for X25 interface. Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22X25: Use identifiers for isdn device to x25 interfaceandrew hendry
Change magic numbers to identifiers for X25 interface. also minor check patch formatting. Signed-off-by: Andrew Hendry <andrew.hendry@gmail.com> Acked-by: Karsten Keil <isdn@linux-pingi.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22niu: Add skb->rxhash support.David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22qlcnic: update version 5.0.2Amit Kumar Salecha
Update version to indicate IDC(fw recovery) changes. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22qlcnic: protect resource accessAmit Kumar Salecha
We do netif_device_attach, even if resource allocation fails. Driver callbacks can be called, if device is attached. All these callbacks need to be protected by ADAPTER_UP_MAGIC check. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22qlcnic: fix rcv buffer leakAmit Kumar Salecha
Rcv producer value should be read in spin-lock. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22qlcnic: fix pci semaphore checksAmit Kumar Salecha
Driver should not go ahead with fw recovery if fails to acquire semaphore. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22qlcnic: define macro for driver stateAmit Kumar Salecha
Defining macro to set and clear driver state. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22qlcnic: fix fw initialization responsibilityAmit Kumar Salecha
Now any pci-func can start fw, whoever sees the reset ack first. Before this, pci-func which sets the RESET state has the responsibility to start fw. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22qlcnic: fix defines as per IDC documentAmit Kumar Salecha
Different class of drivers co-exist for CNA device, there is some minimal interaction that will be required amongst the drivers for performing some device level operations. All the driver should follow inter driver coexistence document. Fixing polling interval and spelling mistake. Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22qlcnic: additional driver statisticsAmit Kumar Salecha
Added additional driver statistics to track errors in rcv/tx path. Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22cxgb4: Make unnecessarily global functions staticRoland Dreier
Also put t4_write_indirect() inside "#if 0" to avoid a "defined but not used" compile warning. Signed-off-by: Roland Dreier <rolandd@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22cxgb4: Use ntohs() on __be16 value instead of htons()Roland Dreier
Use the correct direction of byte-swapping function to fix a mistake shown by sparse endianness checking -- c.fl0id is __be16. Signed-off-by: Roland Dreier <rolandd@cisco.com> Acked-by: Dimitris Michailidis <dm@chelsio.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22ehea: fix possible DLPAR/mem deadlockThomas Klein
Force serialization of userspace-triggered DLPAR/mem operations Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-22ehea: error handling improvementThomas Klein
Reset a port's resources only if they're actually in an error state Signed-off-by: Thomas Klein <tklein@de.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21ks8842: Add platform data for setting mac addressRichard Röjfors
This patch adds platform data to the ks8842 driver. Via the platform data a MAC address, to be used by the controller, can be passed. To ensure this MAC address is used, the MAC address is written after each hardware reset. Signed-off-by: Richard Röjfors <richard.rojfors@pelagicore.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21net: small cleanup of lib8390Nikanth Karthikesan
Remove the always true #if 1. Also the unecessary re-test of ei_local->irqlock and the unreachable printk format string. Signed-off-by: Nikanth Karthikesan <knikanth@suse.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21ath9k_hw: make all AR9002 initvals use u32Luis R. Rodriguez
Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-21ath9k_hw: make two initvals consto for the AR9001 familyLuis R. Rodriguez
This makes ar5416Addac_9160 and ar5416Addac_9160 const I guess we skipped them long ago. Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-21Merge branch 'master' of ↵David S. Miller
master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6 Conflicts: drivers/net/wireless/iwlwifi/iwl-6000.c net/core/dev.c
2010-04-21Merge branch 'master' of /home/davem/src/GIT/linux-2.6/David S. Miller
2010-04-21tg3: Enable GRO by default.David S. Miller
This was merely an oversight when I added the *_gro_receive() calls. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21niu: Enable GRO by default.David S. Miller
This was merely an oversight when I added the napi_gro_receive() calls. Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-21Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6
2010-04-20net: sk_sleep() helperEric Dumazet
Define a new function to return the waitqueue of a "struct sock". static inline wait_queue_head_t *sk_sleep(struct sock *sk) { return sk->sk_sleep; } Change all read occurrences of sk_sleep by a call to this function. Needed for a future RCU conversion. sk_sleep wont be a field directly available. Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-20Merge branch 'urgent' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6 * 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6: pcmcia: fix error handling in cm4000_cs.c drivers/pcmcia: Add missing local_irq_restore serial_cs: MD55x support (PCMCIA GPRS/EDGE modem) (kernel 2.6.33) pcmcia: avoid late calls to pccard_validate_cis pcmcia: fix ioport size calculation in rsrc_nonstatic pcmcia: re-start on MFC override pcmcia: fix io_probe due to parent (PCI) resources pcmcia: use previously assigned IRQ for all card functions
2010-04-20Merge branch 'drm-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6 * 'drm-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6: drm: delay vblank cleanup until after driver unload
2010-04-20ath9k: set the STBC flag in rate control if the peer supports itFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20ath9k: add support for Tx and Rx STBCFelix Fietkau
Supported only for single stream rates by the hardware Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20ath9k: initialize the number of tx/rx streams correctlyFelix Fietkau
AR9300 based hardware can 3x3 MCS rates, this should be set in the HT capabilities. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20ath9k: reduce the bits_per_symbol table size, support more streamsFelix Fietkau
Instead of increasing bits_per_symbol for supporting more streams, keep it single-stream only and multiply the values by the numer of streams. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20ath9k: update the ath_max_4ms_framelen tableFelix Fietkau
Include MCS0-31 and also add SGI for HT20. This makes it possible to support more different rate combinations with newer hardware. Based on a patch by Selvam. T. Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20ath9k: update the MCS mask for MCS16 and aboveFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20ath9k: clean up tx buffer handlingFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20ath9k: check for specific rx stuck conditions and recover from themFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20ath5k: basic support for surveyHolger Schurig
This adds the first element of survey data, the noise floor figure. Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20mac80211: sample survey implementation for mac80211 & hwsimHolger Schurig
This adds the survey function to both mac80211 itself and to mac80211_hwsim. For the latter driver, we simply invent some noise level.A real driver which cannot determine the real channel noise MUST NOT report any noise, especially not a magically conjured one :-) Signed-off-by: Holger Schurig <holgerschurig@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20ath9k: Group Key fix for VAPsDaniel Yingqiang Ma
When I set up multiple VAPs with ath9k, I encountered an issue that the traffic may be lost after a while. The detailed phenomenon is 1. After a while the clients connected to one of these VAPs will get into a state that no broadcast/multicast packets can be transfered successfully while the unicast packets can be transfered normally. 2. Minutes latter the unitcast packets transfer will fail as well, because the ARP entry is expired and it can't be freshed due to the broadcast trouble. It's caused by the group key overwritten and someone discussed this issue in ath9k-devel maillist before, but haven't work out a fix yet. I referred the method in madwifi, and made a patch for ath9k. The method is to set the high bit of the sender(AP)'s address, and associated that mac and the group key. It requires the hardware supports multicast frame key search. It seems true for AR9160. Not sure whether it's the correct way to fix this issue. But it seems to work in my test. The patch is attached, feel free to revise it. Signed-off-by: Daniel Yingqiang ma <yma.cool@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-20drm: delay vblank cleanup until after driver unloadJesse Barnes
Drivers may use vblank calls now (e.g. drm_vblank_off) in their unload paths, so don't clean up the vblank related structures until after driver unload. Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: Kristian Høgsberg <krh@bitplanet.net> Signed-off-by: Dave Airlie <airlied@redhat.com>
2010-04-198139too: Fix a typo in the function name.Alexander Kuznetsov
Signed-off-by: Alexander Kuznetsov <alr.kuznetsov@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2010-04-19wireless: rt2x00: rt2800usb: identify Allwin devicesXose Vazquez Perez
Applied common sense, no info from the manufacturer: (0x8516, 0x2070) is RT2070 (0x8516, 0x2770) is RT2770 (0x8516, 0x2870) is RT2870 [...] Signed-off-by: Xose Vazquez Perez <xose.vazquez@gmail.com> Acked-by: Ivo van Doorn <IvDoorn@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-19orinoco: have sparse check endian issuesDavid Kilroy
Orinoco should be endian clean, so enable the checking. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-19orinoco: use cfg80211_find_ieDavid Kilroy
Instead of using a local function. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-04-19orinoco: implement set_wiphy_paramsDavid Kilroy
... to set fragmentation and RTS thresholds. Also report RTS retry settings during wiphy init. Note that the existing semantics for enabling microwave robustness are preserved on firmwares that have it. Signed-off-by: David Kilroy <kilroyd@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v0.10.2 at 2024-07-21 08:53:20 (GMT)