summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-11-08ksz884x: use module_pci_driver to simplify the codeWei Yongjun
Use the module_pci_driver() macro to make the code simpler by eliminating module_init and module_exit calls. dpatch engine is used to auto generate this patch. (https://github.com/weiyj/dpatch) Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07bnx2x: Support loading cnic resources at run-timeMerav Sicron
This patch replaces the BCM_CNIC define with a flag which can change at run-time and which does not use the CONFIG_CNIC kconfig option. For the PF/hypervisor driver cnic is always supported, however allocation of cnic resources and configuration of the HW for offload mode is done only when the cnic module registers bnx2x. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07bnx2x: HSI change for 'update' ramrodMerav Sicron
This patch updates the driver-FW HSI to support changes to the 'update' ramrod (FW supports this change since 7.8.2). This ramrod is sent when the cnic module registers bnx2x, to enable changing the nic_mode configuration in HW at run-time. Signed-off-by: Merav Sicron <meravs@broadcom.com> Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net: fec: reduce spin lock time in fec_ptp_adjfreqFrank Li
move below calculate out of spin lock section diff = fep->cc.mult; diff *= ppb; diff = div_u64(diff, 1000000000ULL); diff is local variable and not neccesary in spin lock Signed-off-by: Frank Li <Frank.Li@freescale.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net: fec: default select FEC_PTP at mx6 platformFrank Li
Remove PPS. Limit FEC_PTP option for i.MX chip only. FEC_PTP default is on at mx6 platform. Signed-off-by: Frank Li <Frank.Li@freescale.com> Acked-by: Richard Cochran <richardcochran@gmail.com> Acked-by: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net/at91_ether: fix comment and style issuesJoachim Eastwood
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net/at91_ether: clean up print outsJoachim Eastwood
Convert all printk's to netdev_ counterparts and fix up some printed texts. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net/at91_ether: drop board_data private struct memberJoachim Eastwood
No longer used after gpio phy interrupt support was removed from at91_ether. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net/at91_ether: use stat function from macbJoachim Eastwood
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net/at91_ether: use macb functions for get/set hwaddrJoachim Eastwood
Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net/macb: export macb_set_hwaddr and macb_get_hwaddrJoachim Eastwood
for usage in at91_ether driver. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net/macb: support reversed hw addrJoachim Eastwood
This is used on one AT91RM9200 board where a bootloader stores the Ethernet address in the wrong order. Support this on macb so address setting functions can be shared with the at91_ether driver. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net/macb: check all address registers setsJoachim Eastwood
The macb driver in u-boot uses the first register set while the at91_ether driver in u-boot uses the second register set. By checking all register set, like at91_ether does, this code can be shared between the drivers. This only changes behavior on macb if no vaild address is found in the first register set. Signed-off-by: Joachim Eastwood <manabian@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07be2net: remove adapter->eq_next_idxSathya Perla
It's not used anywhere Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07be2net: remove roce on lancerSathya Perla
roce interface is suppored only on Skyhawk-R. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07be2net: fix access to SEMAPHORE regSathya Perla
The SEMAPHORE register was being accessed from the csr BAR space. This BAR may not be available in some Skyhawk-R configurations. Instead, access this register via the PCI config space (it's available there too). Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07be2net: re-factor bar mapping codeSathya Perla
1) separate NIC and roce bar mapping code 2) parse sli_intf::if_type inside be_map_pci_bars() as if_type must be used only to identify bars. 3) Use pci_iomap/unmap() routines Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07be2net: do not use sli_family to identify skyhawk-R chipSathya Perla
SKYHAWK_FAMILY will not identify all revisions of the chip. Use device-id check (skyhawk_chip() macro) instead. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07be2net: fix wrong usage of adapter->generationSathya Perla
adapter->generation was being incorrectly set as BE_GEN3 for Skyhawk-R. Replace generation usage with XXX_chip() macros to identify the chip. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07be2net: remove LANCER A0 workaroundSathya Perla
It's not needed anymore. Signed-off-by: Sathya Perla <sathya.perla@emulex.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07mlx4: change TX coalescing defaultsEric Dumazet
mlx4 currently uses a too high tx coalescing setting, deferring TX completion interrupts by up to 128 us. With the recent skb_orphan() removal in commit 8112ec3b872, performance of a single TCP flow is capped to ~4 Gbps, unless we increase tcp_limit_output_bytes. I suggest using 16 us instead of 128 us, allowing a finer control. Performance of a single TCP flow is restored to previous levels, while keeping TCP small queues fully enabled with default sysctl. This patch is also a BQL prereq. Reported-by: Vimalkumar <j.vimal@gmail.com> Signed-off-by: Eric Dumazet <edumazet@google.com> Cc: Yevgeny Petrilin <yevgenyp@mellanox.com> Cc: Or Gerlitz <ogerlitz@mellanox.com> Acked-by: Amir Vadai <amirv@mellanox.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07usbnet: runtime wake up device before calling usbnet_{read|write}_cmdMing Lei
This patch gets the runtime PM reference count before calling usbnet_{read|write}_cmd, and puts it after completion of the usbnet_{read|write}_cmd, so that the usb control message can always be sent to one active device in the non-PM context. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07usbnet: smsc95xx: apply the introduced usbnet_{read|write}_cmd_nopmMing Lei
This patch applies the introduced usbnet_read_cmd_nopm() and usbnet_write_cmd_nopm() in the callback of resume and suspend to avoid deadlock if USB runtime PM is considered into usbnet_read_cmd() and usbnet_write_cmd(). Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07usbnet: smsc95xx: fix memory leak in smsc95xx_suspendMing Lei
This patch fixes memory leak in smsc95xx_suspend. Also, it isn't necessary to bother mm to allocate 8bytes/16byte, and we can use stack variable safely. Acked-By: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07usbnet: smsc75xx: apply the introduced usbnet_{read|write}_cmd_nopmMing Lei
This patch applies the introduced usbnet_read_cmd_nopm() and usbnet_write_cmd_nopm() in the callback of resume and suspend to avoid deadlock if USB runtime PM is considered into usbnet_read_cmd() and usbnet_write_cmd(). Cc: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07usbnet: introduce usbnet_{read|write}_cmd_nopmMing Lei
This patch introduces the below two helpers to prepare for solving the usbnet runtime PM problem, which may cause some network utilities (ifconfig, ethtool,...) touch a suspended device. usbnet_read_cmd_nopm() usbnet_write_cmd_nopm() The above two helpers should be called by usbnet resume/suspend callback to avoid deadlock. Signed-off-by: Ming Lei <ming.lei@canonical.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net: calxedaxgmac: ip align receive buffersRob Herring
On gcc 4.7, we will get alignment traps in the ip stack if we don't align the ip headers on receive. The h/w can support this, so use ip aligned allocations. Cut down the unnecessary padding on the allocation. The buffer can start on any byte alignment, but the size including the begining offset must be 8 byte aligned. So the h/w buffer size must include the NET_IP_ALIGN offset. Thanks to Eric Dumazet for the initial patch highlighting the padding issues. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net: calxedaxgmac: rework transmit ring handlingRob Herring
Only generate tx interrupts on every ring size / 4 descriptors. Move the netif_stop_queue call to the end of the xmit function rather than checking at the beginning. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net: calxedaxgmac: drop some unnecessary register writesRob Herring
The interrupts have already been cleared, so we don't need to clear them again. Also, we could miss interrupts if they are cleared, but we don't process the packet. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net: calxedaxgmac: use raw i/o accessors in rx and tx pathsRob Herring
The standard readl/writel accessors involve a spinlock and cache sync operation on ARM platforms with an outer cache. Only DMA triggering accesses need this, so use the raw variants instead in the critical paths. The relaxed variants would be more appropriate, but don't exist on all arches. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net: calxedaxgmac: remove explicit rx dma buffer pollingRob Herring
New received frames will trigger the rx DMA to poll the DMA descriptors, so there is no need to tell the h/w to poll. We also want to enable dropping frames from the fifo when there is no buffer. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07net: calxedaxgmac: enable operate on 2nd frame modeRob Herring
Enable the tx dma to start reading the next frame while sending the current frame. Signed-off-by: Rob Herring <rob.herring@calxeda.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07tg3: Call tg3_netif_stop() from tg3_stop()Nithin Nayak Sujir
instead of making separate tg3_napi_disable() and netif_tx_disable() calls. Update version to 3.126. Signed-off-by: Nithin Nayak Sujir <nsujir@broadcom.com> Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-07tg3: Support 5717 C0Michael Chan
Add support for 5717C0 which is a 5720A0 with special bonds-out option. Signed-off-by: Michael Chan <mchan@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-06net: at91_ether: add pinctrl supportJean-Christophe PLAGNIOL-VILLARD
If no pinctrl available just report a warning as some architecture may not need to do anything. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Tested-by: Joachim Eastwood <manabian@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-06net: at91_ether: add dt supportJean-Christophe PLAGNIOL-VILLARD
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Tested-by: Joachim Eastwood <manabian@gmail.com> Cc: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: netdev@vger.kernel.org Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-06drivers: ethernet: qlogic: netxen_nic_ethtool.c: Fixed a coding style issueKumar Amit Mehta
Fixed some coding style issues. Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com> Acked-by: Rajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-06drivers: ethernet: qlogic: qlge_dbg.c: Fixed a coding style issueKumar Amit Mehta
checkpatch.pl throws error message for the current code. This patch fixes this coding style issue. Signed-off-by: Kumar Amit Mehta <gmate.amit@gmail.com> Acked-by: Jitendra Kalsaria <Jitendra.kalsaria@qlogic.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-04r8169: enable internal ASPM and clock request settingshayeswang
The following chips need to enable internal settings to let ASPM and clock request work. RTL8111E-VL, RTL8111F, RTL8411, RTL8111G RTL8105, RTL8402, RTL8106 Signed-off-by: Hayes Wang <hayeswang@realtek.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03drivers/net/ethernet/ibm/emac/mal.c: use WARNJulia Lawall
Use WARN rather than printk followed by WARN_ON(1), for conciseness. A simplified version of the semantic patch that makes this transformation is as follows: (http://coccinelle.lip6.fr/) // <smpl> @@ expression list es; @@ -printk( +WARN(1, es); -WARN_ON(1); // </smpl> Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03atp: remove set_rx_mode_8012()Paul Bolle
Building atp.o triggers this GCC warning: drivers/net/ethernet/realtek/atp.c: In function ‘set_rx_mode’: drivers/net/ethernet/realtek/atp.c:871:26: warning: ‘mc_filter[0]’ may be used uninitialized in this function [-Wuninitialized] GCC is correct. In promiscuous mode 'mc_filter' will be used uninitialized in set_rx_mode_8012(), which is apparently inlined into set_rx_mode(). But it turns out set_rx_mode_8012() will never be called, since net_local.chip_type will always be RTL8002. So we can just remove set_rx_mode_8012() and do some related cleanups. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03cpsw: fix leaking IO mappingsRichard Cochran
The CPSW driver remaps two different IO regions, but fails to unmap them both. This patch fixes the issue by calling iounmap in the appropriate places. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03cpsw: rename register banks to match the reference manual, part 2Richard Cochran
The code mixes up the CPSW_SS and the CPSW_WR register naming. This patch changes the names to conform to the published Technical Reference Manual from TI, in order to make working on the code less confusing. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03macb: Keep driver's speed/duplex in sync with actual NCFGRVitalii Demianets
When underlying phy driver restores its state very fast after being brought down and up so that macb driver function macb_handle_link_change() was never called with link state "down", driver's internal representation of phy speed and duplex (bp->speed and bp->duplex) didn't change. So, macb driver sees no reason to perform actual write to the NCFGR register, although the speed and duplex settings in that register were reset when interface was brought down and up. In that case actual phy speed and duplex differ from NCFGR settings. The patch fixes that by keeping internal driver representation of speed and duplex in sync with actual content of NCFGR. Signed-off-by: Vitalii Demianets <vitas@nppfactor.kiev.ua> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03net: neterion: Do not break word unregister.YOSHIFUJI Hideaki / 吉藤英明
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03net: sh_eth: Fix a typo - replace regist with register.YOSHIFUJI Hideaki / 吉藤英明
Signed-off-by: YOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03ptp: fixup Kconfig for two PHC drivers.Richard Cochran
Ben Hutchings recently came up with a better way to handle the kconfig dependencies for the PTP hardware clocks. This patch converts one new and one older driver to the new scheme. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03vxlan: allow a user to set TTL valueVincent Bernat
"ip link add ... type vxlan ... ttl X" allows a user to set the TTL used by a VXLAN for encapsulation. The provided value was ignored by vxlan module and the default value of 1 was used when encapsulating multicast packets. Signed-off-by: Vincent Bernat <bernat@luffy.cx> Acked-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03smsc75xx: add wol support for more frame typesSteve Glendinning
This patch adds support for wol wakeup on unicast, broadcast, multicast and arp frames. Signed-off-by: Steve Glendinning <steve.glendinning@shawell.net> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-11-03r8169: Kill SafeMtu macroKirill Smelkov
After d58d46b5 (r8169: jumbo fixes.) max frame len is stored in rtl_chip_infos[].jumbo_max for each chip and SafeMtu should be gone. Signed-off-by: Kirill Smelkov <kirr@mns.spb.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v0.10.2 at 2024-10-03 13:28:59 (GMT)