summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2010-01-15b43: N-PHY: implement TX power control coef setupRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: add RX IQ calibrationi for rev < 3Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: add huge calculating TX IQ LORafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: implement calculating IQ gain paramsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: update TX calibration ladderRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: add RX radio cores calibrationRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: add TX LP FBW (TX filter 40 related)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: implement getting TX gainsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: implement calculating RX IQ compRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: implement RX IQ estimationRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: implement restoring general configurationRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>a Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: implement workaround for TX IQRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: implement RX IQ coeffsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: add function than forces (not) staying in carrier searchRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: add RSSI calibration restoreRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>` Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: implement PA overriding (RF control related)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: RSSI calibration for rev < 3Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: add RSSI polling and setting 2055 (radio) VCMRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: implement RSSI selection and offset scalingRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: add clip detection reading/writing and some classifier functionRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: split RSSI calibration into 2 functions (rev2, rev3)Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: update CCA resetRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: update init code to match current specsRafał Miłecki
Previous init path was based on old specs from old driver. Update it as much as possible leaving some TODOs for not implemented functions. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: add various tablesRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: add global variables to b43_phy_n structRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: add missing register definitionsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: add needed struct definitionsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: add shared memory offsets definitionsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: N-PHY: clean table init, check PHY revRafał Miłecki
Move table init to tables_nphy.c, detect newer PHY which use different init. We don't init newer PHYs yet but this at least shows what more is needed. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: add new SSB's core id for BCM4328Rafał Miłecki
Following line shows my BCM4328 detected on SSB. We didn't include 0x0C rev. ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0C, vendor 0x4243) Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15b43: use standard fls for finding the most significant bitRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15ath9k: implement coverage class supportFelix Fietkau
Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-15ath9k: cleanup slot time and ack/cts timeout handlingFelix Fietkau
Previously ath9k left the initialization of slot timing and ACK/CTS timeout to the mode specific initvals. This does not handle short vs long slot in 2.4 GHz and uses a rather strange value for the 2.4 GHz ACK timeout (64 usec). This patch uses the proper ath9k_hw functions for setting slot time and timeouts and also implements the switch between short and long slot time in 2.4 GHz Signed-off-by: Felix Fietkau <nbd@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-14Staging: r8187se: Fix compile error from wireless-testing commit 7044cc56Larry Finger
In wireless-testing, commit 7044cc56 added struct ieee80211_hdr_3addr to include/linux/ieee80211.h. This definition collides with one that is in the r8187se driver in staging. The conflict is resolved by changing r8187se to use the definition from include/linuc/ieee80211.h. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-14ath9k: Fix panic on driver loadSujith
The device has to be marked as invalid before registering the ISR. HW initialization takes place after the ISR has been registered, and the invalid flag is eventually cleared in the ->stop() callback. Reported-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Sujith <Sujith.Manoharan@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-14Remove config option B43_LEGACY_RFKILL completelyChristoph Egger
In f41f3f373dd72344c65d801d6381fe83ef3a2c54 the B43 driver was ported to use the cfg80211 API for rfkill and consequently the config option was dropped (RFKILL is now unconditionally enabled). However in the Kernel Info the feature is still checked and reported missing. This patch just removes the conditional and the relevant code blocks while still reporting that feature unconditionally would be another option (it's always there). Signed-off-by: Christoph Egger <siccegge@stud.informatik.uni-erlangen.de> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-14wl1271: remove unused flagsLuis R. Rodriguez
These are unused and as with a previous patch 5ef5da for wl1251 this removes some other unused flags. the IRQ_MASK specifically conflicts with include/pcmcia/cs.h when using compat-wireless. Cc: Kalle Valo <kalle.valo@nokia.com> Signed-off-by: Luis R. Rodriguez <lrodriguez@atheros.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-14b43legacy: Declare all possible ucodeX.fw filesTim Gardner
Enhance module information with the names of the firmware files that could be used by this driver. This helps tools like Jockey to correctly detect and/or install the firmware files relevant to this driver. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-14b43: Declare at least one real firmware file using MODULE_FIRMWARE.Tim Gardner
BugLink: http://bugs.launchpad.net/bugs/488636 Enhances module information with the names of the firmware files that could be used by this driver. This helps tools like Jockey to correctly detect and/or install the firmware files relevant to this driver. Signed-off-by: Tim Gardner <tim.gardner@canonical.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-14iwmc3200wifi: Add UMAC wifi headers to the pmkid commandSamuel Ortiz
Without this header, we can trigger a UMAC crash with debug enabled UMACs. Signed-off-by: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-14Revert "iwmc3200wifi: fix array out-of-boundary access"John W. Linville
This reverts commit 6c853da3f30c93eae847ecbcd9fdf10ba0da04c2. From Message-ID: <1262663293.551.117.camel@debian> On Sat, 2010-01-02 at 22:09 +0800, Dan Carpenter wrote: > It don't think 6c853da3f30c93 is right. That's the patch > titled "iwmc3200wifi: fix array out-of-boundary access" > > Allocate priv->rx_packets[IWM_RX_ID_HASH + 1] because the max array > index is IWM_RX_ID_HASH according to IWM_RX_ID_GET_HASH(). > > In 2.6.33-rc2 IWM_RX_ID_GET_HASH() doesn't go as high as IWM_RX_ID_HASH > and I don't see any array out-of-bounds. > > #define IWM_RX_ID_GET_HASH(id) ((id) % IWM_RX_ID_HASH) Ah, you are right. I took '%' for '&'. John, would you revert it? Sorry for the false alarm. Thanks, -yi Reported-by: Dan Carpenter <error27@gmail.com> Reviewed-by: Zhu Yi <yi.zhu@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: update version number (to 0.12) and copyrightLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: enable multi-BSS AP operationLennert Buytenhek
As follows: - GET_HW_SPEC is now responsible for setting priv->{ap,sta}_macids_supported, which are bitmasks of supported macids for AP and STA mode. (Typically, STA firmware images will support only one macid, #0, in STA mode, and AP firmware images will support macids #0-7, in AP mode.) - Our wiphy ->interfaces_modes is now set based on the non-zero-ness of these two bitmasks. - We main priv->macids_used, a bitmask of which macids are currently in use. ->add_interface() will assign the lowest free macid for this interface type as it is created, or bail out if there are no more free macids to assign. ->delete_interface() will mark the macid as being free again. This enables the multi-BSS code added in the previous commits. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: post per-vif firmware commands as per-vif commandsLennert Buytenhek
SET_BEACON, SET_MAC_ADDR, BSS_START and SET_NEW_STN are the currently supported firmware commands that are actually per-vif commands. Use mwl8k_post_pervif_cmd() for these commands, so that the macid of the vif they operate on gets passed down into the firmware. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: prepare for posting per-vif firmware commandsLennert Buytenhek
One of the bytes in the mwl8k firmware command header is the 'macid' byte, which for per-vif commands indicates which of the BSSes this command is intended for. (For commands that are not per-vif commands, this byte can just be 0.) This patch adds mwl8k_post_pervif_cmd(), which will take the macid assigned to this interface (to be done in ->add_interface()), copy it into the command packet macid field, and post the command as usual. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: convert the priv->vif pointer to a list of vifsLennert Buytenhek
To prepare for adding multi-BSS support. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: use firmware capability field to decide which bands to registerLennert Buytenhek
Make the decision about whether to register the 2.4 and 5 GHz bands with mac80211 by looking at the capability field in GET_HW_SPEC (STA firmware only for now). This enables 5 GHz STA operation. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: allow selecting 5 GHz channelsLennert Buytenhek
Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: handle 5 GHz legacy rate bitmaps in firmware commandsLennert Buytenhek
Whenever mac80211 gives us a legacy rate bitmap in the context of the 5 GHz band, we need to remember to shift the bitmap left by 5 positions before giving it to the firmware, as the firmware follows the bitmap bit assignment of the 2.4 GHz rate table even if we're on the 5 GHz band, and the 2.4 GHz rate table includes five non-OFDM rates at the start that are not valid in the 5 GHz band. Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-01-12mwl8k: properly set receive status rate index on 5 GHz receiveLennert Buytenhek
The mwl8k firmware uses indices into the 2.4 GHz band rate table for the receive descriptor channel field even if the packet was received on a 5 GHz channel, while mac80211 expects an index into the 5 GHz band rate table when packets are received on the 5 GHz band, which presents a mismatch as the 5 GHz band rate table lacks the five non-OFDM rates that the 2.4 GHz rate table starts with. To handle this properly, we need to substract 5 from the rate index field if the packet was received on a 5 GHz channel (and was not received at an MCS rate). Signed-off-by: Lennert Buytenhek <buytenh@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
generated by cgit v0.10.2 at 2024-09-19 20:09:05 (GMT)