| Age | Commit message (Collapse) | Author |
|---|
|
This comment about using ioremap() for 2.4 kernels is not necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The i_IorangeBase0 boardinfo is not used. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The i_IorangeBase2 boardinfo is not used. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
When it is used, the entire PCI bar is ioremap'ed with pci_ioremap_bar().
The i_IorangeBase3 boardinfo is no longer needed.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.
This also makes sure that the entire PCI bar is ioremap'ed instead
of assuming the size of the bar.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.
This also makes sure that the entire PCI bar is ioremap'ed instead
of assuming the size of the bar.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.
This also makes sure that the entire PCI bar is ioremap'ed instead
of assuming the size of a bar.
For aesthetic reasons, don't set the private data phys_addr vars
until after the ioremap is successful.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.
This also makes sure that the entire PCI bar is ioremap'ed instead
of assuming the size of the bar.
Also, since this driver only uses memory mapped I/O it is not
necessary to set the dev->iobase.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.
Refactor the code a bit. The dev->iobase only needs to be set
when the board does not use memory mapped I/O. And the 'iobase'
passed to subdev_8255_init() is an unsigned long.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.
This also makes sure that the entire PCI bar is ioremap'ed instead
of assuming the size of the bar.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This driver does not use the dev->iobase so don't bother initializing
it.
The plx9080_phys_iobase is not used in the driver. Remove it from the
private data.
Tidy up the initialization of the other phy_iobase variables.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This enum is only used in the ioremap of the PCI resources and it
doesn't really help make the code any clearer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This enum is only used in the ioremap of the PCI resources and it
doesn't really help make the code any clearer.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use pci_ioremap_bar() to ioremap the PCI resources. That function
just takes the pci device and a bar number. It also has some
additional sanity checks to make sure the bar is actually a
memory resource.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use comedi_request_region() to request the I/O region used by this
driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use comedi_request_region() to request the I/O region used by this
driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use __comedi_request_region() to request the additional I/O region
used by this driver.
Remove the error message when the request_region() fails,
comedi_request_reqion() will output the error message if necessary.
For aesthetic reasons, rename the local variable 'retval' to
simply 'ret'.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use comedi_request_region() to request the I/O region used by this
driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Currently this driver calls request_region() in labpc_common_attach()
which is the common attach function for the ISA, PCMCIA, and PCI
versions of the labpc board.
The PCMCIA support is handled in a separate driver, ni_labpc_cs.
That driver sets the dev->iobase after aquiring the resource and
then just passes it to labpc_common_attach() which then sets
dev->iobase again.
The PCI support, currently in this driver, calls mite_setup() to
aquire the resource and then passes it to labpc_common_attach()
to set the dev->iobase.
The ISA support, also in this driver, passes a user supplied
configuration option to labpc_common_attach() which then does
the request_region() before setting the dev->iobase.
Move the request_region() to the ISA support code in labpc_attach()
and set the dev->iobase there before calling the common attach
code.
For the PCI support, also set the dev->iobase before calling the
common code.
This allows removing the extra parameter from labpc_common_attach().
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
The dev->board_name is initialized by the comedi core before calling
the (*attach) or (*auto_attach) functions. It only needs to be updated
if the driver does any additional probing and changes the dev->board_ptr.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the board attach noise as well as the error message when the
request_region() fails, comedi_request_reqion() will output the error
message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.
Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the board attach noise as well as the error message when the
request_region() fails, comedi_request_reqion() will output the error
message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Change the parameters passed to __unioxx5_subdev_init(), we need
the comedi_device pointer to call __comedi_request_region() and
the 'minor' is only used in some kernel noise so remove it. Rename
the parameters 'subdev' and 'subdev_iobase' to simply 's' and
'iobase'.
Use __comedi_request_region() to request the I/O region needed by
the subdevice. Remove the attach noise as well as the error message
when the request_region() fails, comedi_request_reqion() will output
the error message if necessary.
Return -ENOMEM is the kzalloc fails instead of -1.
Fix unioxx5_attach() to use the new parameters to __unioxx5_subdev_init().
Pass on any error codes instead of -1.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use __comedi_request_region() to request the additional I/O region
used by this driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use __comedi_request_region() to request the additional I/O region
used by this driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use __comedi_request_region() to request the additional I/O region
used by this driver.
Remove the error message when the request_region() fails,
comedi_request_reqion() will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use __comedi_request_region() to request the additional I/O region
used by this driver.
Remove the error message when the request_region() fails,
comedi_request_reqion() will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use __comedi_request_region() to request the I/O regions used by
this driver.
Remove the error message when the request_region() fails,
comedi_request_reqion() will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Split comedi_request_region() into two helper functions.
__comedi_request_region()
Handles the actual request_region() call.
comedi_request_region()
Calls __comedi_request_region() and then sets dev->iobase if the
request was successful.
This allows drivers to use the __comedi_request_region() helper
to handle the request without setting the dev->iobase.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.
Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Remove the comment about the configuration options. It's not
correct for this board.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This driver does not use interruptes. Don't bother parsing the
configuration option from "comedi_config".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.
Remove the unnecessary initialization of dev->board_name.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.
Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
This legacy driver does no additional probing so the dev->board_name
will already be properly initialized by the comedi core before calling
the (*attach) function.
Remove the unnecessary initialization of dev->board_name and use it
when requesting the resources instead of the open-coded strings.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
Use comedi_request_region() to request the I/O region used by this
driver.
Remove the noise when the board is first attached as well as the
error message when the request_region() fails, comedi_request_reqion()
will output the error message if necessary.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
