summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-04-07Merge tag 'regmap-3.4-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull two more small regmap fixes from Mark Brown: - Now we have users for it that aren't running Android it turns out that regcache_sync_region() is much more useful to drivers if it's exported for use by modules. Who knew? - Make sure we don't divide by zero when doing debugfs dumps of rbtrees, not visible up until now because everything was providing at least some cache on startup. * tag 'regmap-3.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: prevent division by zero in rbtree_show regmap: Export regcache_sync_region()
2012-04-07Merge tag 'sh-for-linus' of git://github.com/pmundt/linux-shLinus Torvalds
Pull SuperH fixes from Paul Mundt. * tag 'sh-for-linus' of git://github.com/pmundt/linux-sh: sh: fix clock-sh7757 for the latest sh_mobile_sdhi driver serial: sh-sci: use serial_port_in/out vs sci_in/out. sh: vsyscall: Fix up .eh_frame generation. sh: dma: Fix up device attribute mismatch from sysdev fallout. sh: dwarf unwinder depends on SHcompact. sh: fix up fallout from system.h disintegration.
2012-04-07Merge branch 'release' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux Pull ACPI & Power Management patches from Len Brown: "Two fixes for cpuidle merge-window changes, plus a URL fix in MAINTAINERS" * 'release' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux: MAINTAINERS: Update git url for ACPI cpuidle: Fix panic in CPU off-lining with no idle driver ACPI processor: Use safe_halt() rather than halt() in acpi_idle_play_dead()
2012-04-07Merge branch '3.4-rc-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull target fixes from Nicholas Bellinger: "Pull two tcm_fc fabric related fixes for -rc2: Note that both have been CC'ed to stable, and patch #1 is the important one that addresses a memory corruption bug related to FC exchange timeouts + command abort. Thanks again to MDR for tracking down this issue!" * '3.4-rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: tcm_fc: Do not free tpg structure during wq allocation failure tcm_fc: Add abort flag for gracefully handling exchange timeout
2012-04-07tcm_fc: Do not free tpg structure during wq allocation failureMark Rustad
Avoid freeing a registered tpg structure if an alloc_workqueue call fails. This fixes a bug where the failure was leaking memory associated with se_portal_group setup during the original core_tpg_register() call. Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Acked-by: Kiran Patil <Kiran.patil@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-07tcm_fc: Add abort flag for gracefully handling exchange timeoutMark Rustad
Add abort flag and use it to terminate processing when an exchange is timed out or is reset. The abort flag is used in place of the transport_generic_free_cmd function call in the reset and timeout cases, because calling that function in that context would free memory that was in use. The aborted flag allows the lifetime to be managed in a more normal way, while truncating the processing. This change eliminates a source of memory corruption which manifested in a variety of ugly ways. (nab: Drop unused struct fc_exch *ep in ft_recv_seq) Signed-off-by: Mark Rustad <mark.d.rustad@intel.com> Acked-by: Kiran Patil <Kiran.patil@intel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
2012-04-07Merge branches 'idle-fix' and 'misc' into releaseLen Brown
2012-04-07Merge branch 'stable' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile Pull arch/tile bug fixes from Chris Metcalf: "This includes Paul Gortmaker's change to fix the <asm/system.h> disintegration issues on tile, a fix to unbreak the tilepro ethernet driver, and a backlog of bugfix-only changes from internal Tilera development over the last few months. They have all been to LKML and on linux-next for the last few days. The EDAC change to MAINTAINERS is an oddity but discussion on the linux-edac list suggested I ask you to pull that change through my tree since they don't have a tree to pull edac changes from at the moment." * 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile: (39 commits) drivers/net/ethernet/tile: fix netdev_alloc_skb() bombing MAINTAINERS: update EDAC information tilepro ethernet driver: fix a few minor issues tile-srom.c driver: minor code cleanup edac: say "TILEGx" not "TILEPro" for the tilegx edac driver arch/tile: avoid accidentally unmasking NMI-type interrupt accidentally arch/tile: remove bogus performance optimization arch/tile: return SIGBUS for addresses that are unaligned AND invalid arch/tile: fix finv_buffer_remote() for tilegx arch/tile: use atomic exchange in arch_write_unlock() arch/tile: stop mentioning the "kvm" subdirectory arch/tile: export the page_home() function. arch/tile: fix pointer cast in cacheflush.c arch/tile: fix single-stepping over swint1 instructions on tilegx arch/tile: implement panic_smp_self_stop() arch/tile: add "nop" after "nap" to help GX idle power draw arch/tile: use proper memparse() for "maxmem" options arch/tile: fix up locking in pgtable.c slightly arch/tile: don't leak kernel memory when we unload modules arch/tile: fix bug in delay_backoff() ...
2012-04-07Merge tag 'stable/for-linus-3.4-rc1-tag' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen Pull xen fixes from Konrad Rzeszutek Wilk: "Two fixes for regressions: * one is a workaround that will be removed in v3.5 with proper fix in the tip/x86 tree, * the other is to fix drivers to load on PV (a previous patch made them only load in PVonHVM mode). The rest are just minor fixes in the various drivers and some cleanup in the core code." * tag 'stable/for-linus-3.4-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/pcifront: avoid pci_frontend_enable_msix() falsely returning success xen/pciback: fix XEN_PCI_OP_enable_msix result xen/smp: Remove unnecessary call to smp_processor_id() xen/x86: Workaround 'x86/ioapic: Add register level checks to detect bogus io-apic entries' xen: only check xen_platform_pci_unplug if hvm
2012-04-07Merge tag 'mmc-fixes-for-3.4-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc Pull MMC fixes from Chris Ball: - Disable use of MSI in sdhci-pci, which caused multiple chipsets to stop working in 3.4-rc1. I'll wait to turn this on again until we have a chipset whitelist for it. - Fix a libertas SDIO powered-resume regression introduced in 3.3; thanks to Neil Brown and Rafael Wysocki for this fix. - Fix module reloading on omap_hsmmc. - Stop trusting the spec/card's specified maximum data timeout length, and use three seconds instead. Previously we used 300ms. Also cleanups and fixes for s3c, atmel, sh_mmcif and omap_hsmmc. * tag 'mmc-fixes-for-3.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cjb/mmc: (28 commits) mmc: use really long write timeout to deal with crappy cards mmc: sdhci-dove: Fix compile error by including module.h mmc: Prevent 1.8V switch for SD hosts that don't support UHS modes. Revert "mmc: sdhci-pci: Add MSI support" Revert "mmc: sdhci-pci: add quirks for broken MSI on O2Micro controllers" mmc: core: fix power class selection mmc: omap_hsmmc: fix module re-insertion mmc: omap_hsmmc: convert to module_platform_driver mmc: omap_hsmmc: make it behave well as a module mmc: omap_hsmmc: trivial cleanups mmc: omap_hsmmc: context save after enabling runtime pm mmc: omap_hsmmc: use runtime put sync in probe error patch mmc: sdio: Use empty system suspend/resume callbacks at the bus level mmc: bus: print bus speed mode of UHS-I card mmc: sdhci-pci: add quirks for broken MSI on O2Micro controllers mmc: sh_mmcif: Simplify calculation of mmc->f_min mmc: sh_mmcif: mmc->f_max should be half of the bus clock mmc: sh_mmcif: double clock speed mmc: block: Remove use of mmc_blk_set_blksize mmc: atmel-mci: add support for odd clock dividers ...
2012-04-06cpuidle: Fix panic in CPU off-lining with no idle driverToshi Kani
Fix a NULL pointer dereference panic in cpuidle_play_dead() during CPU off-lining when no cpuidle driver is registered. A cpuidle driver may be registered at boot-time based on CPU type. This patch allows an off-lined CPU to enter HLT-based idle in this condition. Signed-off-by: Toshi Kani <toshi.kani@hp.com> Cc: Boris Ostrovsky <boris.ostrovsky@amd.com> Reviewed-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Tested-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com> Signed-off-by: Len Brown <len.brown@intel.com>
2012-04-06Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
Pull networking updates from David Miller: 1) Fix inaccuracies in network driver interface documentation, from Ben Hutchings. 2) Fix handling of negative offsets in BPF JITs, from Jan Seiffert. 3) Compile warning, locking, and refcounting fixes in netfilter's xt_CT, from Pablo Neira Ayuso. 4) phonet sendmsg needs to validate user length just like any other datagram protocol, fix from Sasha Levin. 5) Ipv6 multicast code uses wrong loop index, from RongQing Li. 6) Link handling and firmware fixes in bnx2x driver from Yaniv Rosner and Yuval Mintz. 7) mlx4 erroneously allocates 4 pages at a time, regardless of page size, fix from Thadeu Lima de Souza Cascardo. 8) SCTP socket option wasn't extended in a backwards compatible way, fix from Thomas Graf. 9) Add missing address change event emissions to bonding, from Shlomo Pongratz. 10) /proc/net/dev regressed because it uses a private offset to track where we are in the hash table, but this doesn't track the offset pullback that the seq_file code does resulting in some entries being missed in large dumps. Fix from Eric Dumazet. 11) do_tcp_sendpage() unloads the send queue way too fast, because it invokes tcp_push() when it shouldn't. Let the natural sequence generated by the splice paths, and the assosciated MSG_MORE settings, guide the tcp_push() calls. Otherwise what goes out of TCP is spaghetti and doesn't batch effectively into GSO/TSO clusters. From Eric Dumazet. 12) Once we put a SKB into either the netlink receiver's queue or a socket error queue, it can be consumed and freed up, therefore we cannot touch it after queueing it like that. Fixes from Eric Dumazet. 13) PPP has this annoying behavior in that for every transmit call it immediately stops the TX queue, then calls down into the next layer to transmit the PPP frame. But if that next layer can take it immediately, it just un-stops the TX queue right before returning from the transmit method. Besides being useless work, it makes several facilities unusable, in particular things like the equalizers. Well behaved devices should only stop the TX queue when they really are full, and in PPP's case when it gets backlogged to the downstream device. David Woodhouse therefore fixed PPP to not stop the TX queue until it's downstream can't take data any more. 14) IFF_UNICAST_FLT got accidently lost in some recent stmmac driver changes, re-add. From Marc Kleine-Budde. 15) Fix link flaps in ixgbe, from Eric W. Multanen. 16) Descriptor writeback fixes in e1000e from Matthew Vick. * git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) net: fix a race in sock_queue_err_skb() netlink: fix races after skb queueing doc, net: Update ndo_start_xmit return type and values doc, net: Remove instruction to set net_device::trans_start doc, net: Update netdev operation names doc, net: Update documentation of synchronisation for TX multiqueue doc, net: Remove obsolete reference to dev->poll ethtool: Remove exception to the requirement of holding RTNL lock MAINTAINERS: update for Marvell Ethernet drivers bonding: properly unset current_arp_slave on slave link up phonet: Check input from user before allocating tcp: tcp_sendpages() should call tcp_push() once ipv6: fix array index in ip6_mc_add_src() mlx4: allocate just enough pages instead of always 4 pages stmmac: re-add IFF_UNICAST_FLT for dwmac1000 bnx2x: Clear MDC/MDIO warning message bnx2x: Fix BCM57711+BCM84823 link issue bnx2x: Clear BCM84833 LED after fan failure bnx2x: Fix BCM84833 PHY FW version presentation bnx2x: Fix link issue for BCM8727 boards. ...
2012-04-06xen/pcifront: avoid pci_frontend_enable_msix() falsely returning successJan Beulich
The original XenoLinux code has always had things this way, and for compatibility reasons (in particular with a subsequent pciback adjustment) upstream Linux should behave the same way (allowing for two distinct error indications to be returned by the backend). Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-04-06xen/pciback: fix XEN_PCI_OP_enable_msix resultJan Beulich
Prior to 2.6.19 and as of 2.6.31, pci_enable_msix() can return a positive value to indicate the number of vectors (less than the amount requested) that can be set up for a given device. Returning this as an operation value (secondary result) is fine, but (primary) operation results are expected to be negative (error) or zero (success) according to the protocol. With the frontend fixed to match the XenoLinux behavior, the backend can now validly return zero (success) here, passing the upper limit on the number of vectors in op->value. Signed-off-by: Jan Beulich <jbeulich@suse.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-04-06xen: only check xen_platform_pci_unplug if hvmIgor Mammedov
commit b9136d207f08 xen: initialize platform-pci even if xen_emul_unplug=never breaks blkfront/netfront by not loading them because of xen_platform_pci_unplug=0 and it is never set for PV guest. Signed-off-by: Andrew Jones <drjones@redhat.com> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
2012-04-06Merge tag 'fixes-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc Pull "ARM: SoC fixes: from Olof Johansson: "A bunch of fixes for regressions (and a few other problems) in 3.4-rc1: - Fix for regression of mach/io.h cleanup on platforms with PCI or PCMCIA (adding back the include file on those for now) - AT91 fixes for usb and spi - smsc911x ethernet fixes for i.MX - smsc911x fixes for OMAP - gpio fixes for Tegra - A handful of build error and warning fixes for various platforms - cpufreq kconfig dependencies, build and lowlevel debug fixes for Samsung platforms In other words, more or less the regular collection of -rc1/2 type material. A few of them, in particular the smsc911x for OMAP series, aren't technically regressions for 3.4, but they're valid fixes and we're still relatively early in the rc cycle so it seems appropriate to include them." * tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (60 commits) ARM: fix __io macro for PCMCIA ARM: EXYNOS: Fix compiler warning in dma.c file ARM: EXYNOS: fix ISO C90 warning ARM: OMAP2+: hwmod: Fix wrong SYSC_TYPE1_XXX_MASK bit definitions ARM: OMAP2+: hwmod: Make omap_hwmod_softreset wait for reset status ARM: OMAP2+: hwmod: Restore sysc after a reset ARM: OMAP2+: omap_hwmod: Allow io_ring wakeup configuration for all modules ARM: OMAP3: clock data: fill in some missing clockdomains ARM: OMAP4: clock data: Force a DPLL clkdm/pwrdm ON before a relock ARM: OMAP4: clock data: fix mult and div mask for USB_DPLL ARM: OMAP2+: powerdomain: Wait for powerdomain transition in pwrdm_state_switch() gpio: tegra: Iterate over the correct number of banks gpio: tegra: fix register address calculations for Tegra30 EXYNOS: fix dependency for EXYNOS_CPUFREQ ARM: at91: dt: remove unit-address part for memory nodes ARM: at91: fix check of valid GPIO for SPI and USB USB: ehci-atmel: add needed of.h header file ARM: at91/NAND DT bindings: add comments ARM: at91/at91sam9x5.dtsi: fix NAND ale/cle in DT file USB: ohci-at91: trivial return code name change ...
2012-04-06Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jikos/apm Pull an APM fix from Jiri Kosina: "One deadlock/race fix from Niel that got introduced when we were moving away from freezer_*_count() to wait_event_freezable()." * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/apm: APM: fix deadlock in APM_IOC_SUSPEND ioctl
2012-04-06mmc: use really long write timeout to deal with crappy cardsPaul Walmsley
Several people have noticed that crappy SD cards take much longer to complete multiple block writes than the 300ms that Linux specifies. Try to work around this by using a three second write timeout instead. This is a generalized version of a patch from Chase Maupin <Chase.Maupin@ti.com>, whose patch description said: * With certain SD cards timeouts like the following have been seen due to an improper calculation of the dto value: mmcblk0: error -110 transferring data, sector 4126233, nr 8, card status 0xc00 * By removing the dto calculation and setting the timeout value to the maximum specified by the SD card specification part A2 section 2.2.15 these timeouts can be avoided. * This change has been used by beagleboard users as well as the Texas Instruments SDK without a negative impact. * There are multiple discussion threads about this but the most relevant ones are: * http://talk.maemo.org/showthread.php?p=1000707#post1000707 * http://www.mail-archive.com/linux-omap@vger.kernel.org/msg42213.html * Original proposal for this fix was done by Sukumar Ghoral of Texas Instruments * Tested using a Texas Instruments AM335x EVM Signed-off-by: Paul Walmsley <paul@pwsan.com> Tested-by: Tony Lindgren <tony@atomide.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-06mmc: sdhci-dove: Fix compile error by including module.hAlf Høgemark
This patch fixes a compile error in drivers/mmc/host/sdhci-dove.c by including the linux/module.h file. Signed-off-by: Alf Høgemark <alf@i100.no> Cc: <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-06mmc: Prevent 1.8V switch for SD hosts that don't support UHS modes.Al Cooper
The driver should not try to switch to 1.8V when the SD 3.0 host controller does not have any UHS capabilities bits set (SDR50, DDR50 or SDR104). See page 72 of "SD Specifications Part A2 SD Host Controller Simplified Specification Version 3.00" under "1.8V Signaling Enable". Instead of setting SDR12 and SDR25 in the host capabilities data structure for all V3.0 host controllers, only set them if SDR104, SDR50 or DDR50 is set in the host capabilities register. This will prevent the switch to 1.8V later. Signed-off-by: Al Cooper <acooper@gmail.com> Acked-by: Arindam Nath <arindam.nath@amd.com> Acked-by: Philip Rakity <prakity@marvell.com> Acked-by: Girish K S <girish.shivananjappa@linaro.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-06Revert "mmc: sdhci-pci: Add MSI support"Chris Ball
This reverts commit e6039832bed9a9b967796d7021f17f25b625b616. There are reports of MSI breaking SDHCI on multiple chipsets (JMicron and O2Micro, at least), so this should be reverted until we come up with a whitelist or something. Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-06Revert "mmc: sdhci-pci: add quirks for broken MSI on O2Micro controllers"Chris Ball
This reverts commit c16e981b2fd9455af670a69a84f4c8cf07e12658, because it's no longer useful once MSI support is reverted. Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-06mmc: core: fix power class selectionSubhash Jadavani
mmc_select_powerclass() function returns error if eMMC VDD level supported by host is between 2.7v to 3.2v. According to eMMC specification, valid voltage for high voltage cards is 2.7v to 3.6v. This patch ensures that 2.7v to 3.6v VDD range is treated as valid range. Also, failure to set the power class shouldn't be treated as fatal error because even if setting the power class fails, card can still work in default power class. If mmc_select_powerclass() returns error, just print the warning message and go ahead with rest of the card initialization. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Acked-by: Girish K S <girish.shivananjappa@linaro.org> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-06mmc: omap_hsmmc: fix module re-insertionBalaji T K
OMAP4 and OMAP3 HSMMC IP registers differ by 0x100 offset. Adding the offset to platform_device resource structure increments the start address for every insmod operation. MMC command fails on re-insertion as module due to incorrect register base. Fix this by updating the ioremap base address only. Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-06mmc: omap_hsmmc: convert to module_platform_driverFelipe Balbi
This will delete some boilerplate code, no functional changes. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-06mmc: omap_hsmmc: make it behave well as a moduleFelipe Balbi
If we put probe() on __init section, that will never work for multiple module insertions/removals. In order to make it work properly, move probe to __devinit section and use platform_driver_register() instead of platform_driver_probe(). Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-06mmc: omap_hsmmc: trivial cleanupsFelipe Balbi
A bunch of non-functional cleanups to the omap_hsmmc driver. It basically decreases indentation level, drop unneded dereferences and drop unneded accesses to the platform_device structure. Signed-off-by: Felipe Balbi <balbi@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-06mmc: omap_hsmmc: context save after enabling runtime pmBalaji T K
Call context save api after enabling runtime pm to make sure that register access in context save api happens with clk enabled. Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Cc: <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-06mmc: omap_hsmmc: use runtime put sync in probe error patchBalaji T K
pm_runtime_put_sync instead of autosuspend pm runtime API because iounmap(host->base) follows immediately. Reported-by: Rajendra Nayak <rnayak@ti.com> Signed-off-by: Balaji T K <balajitk@ti.com> Signed-off-by: Venkatraman S <svenkatr@ti.com> Cc: <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-06mmc: sdio: Use empty system suspend/resume callbacks at the bus levelRafael J. Wysocki
Neil Brown reports that commit 35cd133c PM: Run the driver callback directly if the subsystem one is not there breaks suspend for his libertas wifi, because SDIO has a protocol where the suspend method can return -ENOSYS and this means "There is no point in suspending, just turn me off". Moreover, the suspend methods provided by SDIO drivers are not supposed to be called by the PM core or bus-level suspend routines (which aren't presend for SDIO). Instead, when the SDIO core gets to suspend the device's ancestor, it calls the device driver's suspend function, catches the ENOSYS, and turns the device off. The commit above breaks the SDIO core's assumption that the device drivers' callbacks won't be executed if it doesn't provide any bus-level callbacks. If fact, however, this assumption has never been really satisfied, because device class or device type suspend might very well use the driver's callback even without that commit. The simplest way to address this problem is to make the SDIO core tell the PM core to ignore driver callbacks, for example by providing no-operation suspend/resume callbacks at the bus level for it, which is implemented by this change. Reported-and-tested-by: Neil Brown <neilb@suse.de> Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl> [stable: please apply to 3.3-stable only] Cc: <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-06mmc: bus: print bus speed mode of UHS-I cardSubhash Jadavani
When UHS-I card is detected also print the bus speed mode in which UHS-I card will be running. Signed-off-by: Subhash Jadavani <subhashj@codeaurora.org> Reviewed-by: Namjae Jeon <linkinjeon@gmail.com> Acked-by: Aaron Lu <aaron.lu@amd.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-06mmc: sdhci-pci: add quirks for broken MSI on O2Micro controllersManuel Lauss
MSI on my O2Micro OZ600 SD card reader is broken. This patch adds a quirk to disable MSI on these controllers. Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-06mmc: sh_mmcif: Simplify calculation of mmc->f_minSimon Horman
There is no need to tune mmc->f_min to a value near 400kHz as the MMC core begins testing frequencies at 400kHz regardless of the value of mmc->f_min. As suggested by Guennadi Liakhovetski. Cc: Magnus Damm <magnus.damm@gmail.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Tested-by: Cao Minh Hiep <hiepcm@gmail.com> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-06mmc: sh_mmcif: mmc->f_max should be half of the bus clockSimon Horman
mmc->f_max should be half of the bus clock. And now that mmc->f_max is not equal to the bus clock the latter should be used directly to calculate mmc->f_min. Cc: Magnus Damm <magnus.damm@gmail.com> Tested-by: Cao Minh Hiep <hiepcm@gmail.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-06mmc: sh_mmcif: double clock speedSimon Horman
Correct an off-by one error when calculating the clock divisor in cases where the host clock is a power of two of the target clock. Previously the divisor was one greater than the correct value in these cases leading to the clock being set at half the desired speed. Thanks to Guennadi Liakhovetski for working with me on the logic for this change. Tested-by: Cao Minh Hiep <hiepcm@gmail.com> Acked-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms@verge.net.au> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-06mmc: block: Remove use of mmc_blk_set_blksizeUlf Hansson
According to the specifications for SD and (e)MMC default blocksize (named BLOCKLEN in Spec.) must always be 512 bytes. Since we hardcoded to always use 512 bytes, we do not explicitly have to set it. Future improvements should potentially make it possible to use a greater blocksize than 512 bytes, but until then let's skip this. Signed-off-by: Ulf Hansson <ulf.hansson@stericsson.com> Reviewed-by: Subhash Jadavani <subhashj@codeauora.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-06mmc: atmel-mci: add support for odd clock dividersLudovic Desroches
Add an odd clock divider capability available from v5xx. It also involves changing the clock divider calculation, and changing the switch-case statement to use top-down fallthrough. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-06mmc: atmel-mci: r/w proof capability only available since v2xxLudovic Desroches
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-06mmc: atmel-mci: correct data timeout computationLudovic Desroches
The HSMCI operates at a rate of up to Master Clock divided by two. Moreover previous calculation can cause overflows and so wrong timeouts. Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com> Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com> Cc: <stable@vger.kernel.org> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-06mmc: sdhci-s3c: Enable runtime power managementMark Brown
Since most of the work is already done by the core we just need to add runtime suspend methods and tell the PM core that runtime PM is enabled for this device. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-06mmc: sdhci-s3c: Use CONFIG_PM_SLEEP to ifdef system suspendMark Brown
This matches current best practice as one can have runtime PM enabled without system sleep and CONFIG_PM is defined for both. Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com> Acked-by: Jaehoon Chung <jh80.chung@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-06mmc: sdhci-s3c: use devm_ functionsJulia Lawall
The various devm_ functions allocate memory that is released when a driver detaches. This patch uses these functions for data that is allocated in the probe function of a platform device and is only freed in the remove function. By using devm_ioremap, it also removes a potential memory leak, because there was no call to iounmap in the probe function. The call to platform_get_resource was moved just to make it closer to the place where its result it used. Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-05mmc: sdhci-s3c: Keep a copy of platform data and use itThomas Abraham
The platform data is copied into driver's private data and the copy is used for all access to the platform data. This simpifies the addition of device tree support for the sdhci-s3c driver. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-05mmc: sdhci-s3c: derive transfer width host cap from max_width in platdataThomas Abraham
max_width member in platform data can be used to derive the mmc bus transfer width that can be supported by the controller. Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-05mmc: sdhci-s3c: Remove usage of clk_type member in platform dataThomas Abraham
SDHCI controllers on Exynos4 do not include the sdclk divider as per the sdhci controller specification. This case can be represented using the sdhci quirk SDHCI_QUIRK_NONSTANDARD_CLOCK instead of using an additional enum type definition 'clk_types'. Hence, usage of clk_type member in platform data is removed and the sdhci quirk is used. In addition to that, since this qurik is SoC specific, driver data is introduced to represent controllers on SoC's that require this quirk. Cc: Ben Dooks <ben-linux@fluff.org> Cc: Jeongbae Seo <jeongbae.seo@samsung.com> Signed-off-by: Thomas Abraham <thomas.abraham@linaro.org> Signed-off-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Chris Ball <cjb@laptop.org>
2012-04-05bonding: properly unset current_arp_slave on slave link upVeaceslav Falico
When a slave comes up, we're unsetting the current_arp_slave without removing active flags from it, which can lead to situations where we have more than one slave with active flags in active-backup mode. To avoid this situation we must remove the active flags from a slave before removing it as a current_arp_slave. Signed-off-by: Veaceslav Falico <vfalico@redhat.com> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: Andy Gospodarek <andy@greyhouse.net> Signed-off-by: Marcelo Ricardo Leitner <mleitner@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-05Merge branch 'akpm' (Andrew's patch-bomb)Linus Torvalds
Merge batch of fixes from Andrew Morton: "The simple_open() cleanup was held back while I wanted for laggards to merge things. I still need to send a few checkpoint/restore patches. I've been wobbly about merging them because I'm wobbly about the overall prospects for success of the project. But after speaking with Pavel at the LSF conference, it sounds like they're further toward completion than I feared - apparently davem is at the "has stopped complaining" stage regarding the net changes. So I need to go back and re-review those patchs and their (lengthy) discussion." * emailed from Andrew Morton <akpm@linux-foundation.org>: (16 patches) memcg swap: use mem_cgroup_uncharge_swap fix backlight: add driver for DA9052/53 PMIC v1 C6X: use set_current_blocked() and block_sigmask() MAINTAINERS: add entry for sparse checker MAINTAINERS: fix REMOTEPROC F: typo alpha: use set_current_blocked() and block_sigmask() simple_open: automatically convert to simple_open() scripts/coccinelle/api/simple_open.cocci: semantic patch for simple_open() libfs: add simple_open() hugetlbfs: remove unregister_filesystem() when initializing module drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callback fs/xattr.c:setxattr(): improve handling of allocation failures fs/xattr.c:listxattr(): fall back to vmalloc() if kmalloc() failed fs/xattr.c: suppress page allocation failure warnings from sys_listxattr() sysrq: use SEND_SIG_FORCED instead of force_sig() proc: fix mount -t proc -o AAA
2012-04-05backlight: add driver for DA9052/53 PMIC v1Ashish Jangam
DA9052/53 PMIC has capability to supply power for upto 3 banks of 6 white serial LEDS. It can also control intensity of independent banks and to drive these banks boost converter will provide up to 24V and forward current of max 50mA. This patch allows to control intensity of the individual WLEDs bank through DA9052/53 PMIC. This patch is functionally tested on Samsung SMDKV6410. Signed-off-by: David Dajun Chen <dchen@diasemi.com> Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com> Cc: Richard Purdie <rpurdie@rpsys.net> Cc: Samuel Ortiz <sameo@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-05simple_open: automatically convert to simple_open()Stephen Boyd
Many users of debugfs copy the implementation of default_open() when they want to support a custom read/write function op. This leads to a proliferation of the default_open() implementation across the entire tree. Now that the common implementation has been consolidated into libfs we can replace all the users of this function with simple_open(). This replacement was done with the following semantic patch: <smpl> @ open @ identifier open_f != simple_open; identifier i, f; @@ -int open_f(struct inode *i, struct file *f) -{ ( -if (i->i_private) -f->private_data = i->i_private; | -f->private_data = i->i_private; ) -return 0; -} @ has_open depends on open @ identifier fops; identifier open.open_f; @@ struct file_operations fops = { ... -.open = open_f, +.open = simple_open, ... }; </smpl> [akpm@linux-foundation.org: checkpatch fixes] Signed-off-by: Stephen Boyd <sboyd@codeaurora.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Al Viro <viro@zeniv.linux.org.uk> Cc: Julia Lawall <Julia.Lawall@lip6.fr> Acked-by: Ingo Molnar <mingo@elte.hu> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2012-04-05drivers/rtc/rtc-88pm860x.c: fix rtc irq enable callbackJett.Zhou
According to 88pm860x spec, rtc alarm irq enable control is bit3 for RTC_ALARM_EN, so fix it. Signed-off-by: Jett.Zhou <jtzhou@marvell.com> Cc: Axel Lin <axel.lin@gmail.com> Cc: Haojian Zhuang <haojian.zhuang@marvell.com> Cc: Alessandro Zummo <a.zummo@towertech.it> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>