| Age | Commit message (Collapse) | Author |
|---|
|
Allow 0 and powers of 2 between 2 and 128 for write_cluster_size.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
When we fetch an interrupt on the CCW console using tsch (via
ccw_device_wait_idle formerly known as wait_cons_dev) we increment
the irq count for the affected interruption class but it is not
accounted as an IO interrupt.
This is broken since commit b603d258a43b4e7339660bdd3b5c25eacd603e54
"s390: remove superfluous tpi from wait_cons_dev"
Fix it so that the sum of the individual interrupts per class matches
the number of IO interrupts again.
Reported-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
In case a machine supports memory hotplug all active memory increments
present at IPL time have been initialized with a "usecount" of 1.
This is wrong if the memory increment size is larger than the memory
section size of the memory hotplug code. If that is the case the
usecount must be initialized with the number of memory sections that
fit into one memory increment.
Otherwise it is possible to put a memory increment into standby state
even if there are still active sections.
Afterwards addressing exceptions might happen which cause the kernel
to panic.
However even worse, if a memory increment was put into standby state
and afterwards into active state again, it's contents would have been
zeroed, leading to memory corruption.
This was only an issue for machines that support standby memory and
have at least 256GB memory.
This is broken since commit fdb1bb15 "[S390] sclp/memory hotplug: fix
initial usecount of increments".
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Cc: stable@vger.kernel.org # 2.6.39+
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Currently always one page is copied to a user buffer for the last
HSA block in memcpy_hsa(). Now the correct length is used.
Signed-off-by: Michael Holzheu <holzheu@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Don't modify function handles to get a disabled handle - call
clp_disable_fh. With this change we also do no longer deconfigure
enabled functions.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Use the debugfs to keep track of a pci function's status changes.
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
If too many ccw requests are pre-build before a suspend/resume cycle
the device might not get enough memory to do path verification
during resume.
Requeue requests to the block device request queue on suspend and free
pre-build ccw requests.
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Reorganize format IO requests and enable usage of PAV.
Signed-off-by: Stefan Haberland <stefan.haberland@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
cio_validate_subchannel is used to do some basic checks to find out
if it's worth to further investigate a subchannel. Move the allocation
and initialization of the subchannels locks to css_alloc_subchannel.
Clean up the functions involved while at it.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Via ccw_device_init_count we keep track of how many devices are in
asynchronous device recognition/initialization. For early devices this
variable was not only used prior to its initialization but used
incorrectly (incremented but never decremented). Fix this by using static
initialization for this variable (and friends), make them visible to
device.c only, and decrement the counter after recognition of early
devices is finished.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Make css_probe_device static and remove an unimplemented prototype.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Use cio_register_early_subchannels to register early subchannels
which are already in use. Call this function before we do the
actual subchannel scanning loop. This helps us to get rid of some
more special cases regarding the console subchannel.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Remove the static console ccw device (and friends) and use dynamic
allocation for these structures. With this change the console
device is treated (mostly) like any other ccw device and we can
remove some special cases.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Remove the static console subchannel (and friends) and use dynamic
allocation for these structures. With this change the console
subchanel is treated (mostly) like any other subchannel and we can
remove some special cases.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Split the subchannel registration in device_initialize and device_add
and move the initialization part inside the allocation function. With
this change we can use refcounting during the complete lifespan of a
subchannel which is important for devices where we do the actually
registration at a later time.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
force_console is used to wake up the CCW based console device to
print a panic message in case something goes wrong in a suspend
or resume cycle. Stop using the static console_subchannel and add
a parameter to this function to specify which ccw device we have
to wake up.
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
wait_cons_dev is used to busy wait for an interrupt on the console
ccw device. Stop using the static console_subchannel and add a
parameter to this function to specify on which ccw device/subchannel
we have to do the polling.
While at it rename the function to ccw_device_wait_idle and
move it to device.c
Reviewed-by: Peter Oberparleiter <oberpar@linux.vnet.ibm.com>
Signed-off-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Use BITS_TO_LONGS() instead of __BITOPS_WORDS() that is considered
to be private macro in asm/bitops.h for s390.
Signed-off-by: Akinobu Mita <akinobu.mita@gmail.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
remove cast for kzalloc return value.
Signed-off-by: Zhang Yanfei <zhangyanfei@cn.fujitsu.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
|
|
Make use of the stored copy of format 1 channel-path data instead
of querying the information every time the corresponding function
is called.
Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Collect format 1 channel-path description data for each CHPID
and update the information in one place.
Reviewed-by: Sebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: Peter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
kfree on NULL pointer is a no-op.
Signed-off-by: Syam Sidhardhan <s.syam@samsung.com>
Signed-off-by: Heiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com>
|
|
Pull drm fixes from Dave Airlie:
"One fix for a hotplug locking regressions, and one fix for an oops if
you unplug the monitor at an inopportune moment on the udl device."
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/fb-helper: Fix locking in drm_fb_helper_hotplug_event
udl: handle EDID failure properly.
|
|
Compiling the at91rm9200_wdt.c driver without at91rm9200
support was leading to several errors:
drivers/built-in.o: In function `at91_wdt_close':
at91_adc.c:(.text+0xc9fe4): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91_wdt_write':
at91_adc.c:(.text+0xca004): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91wdt_shutdown':
at91_adc.c:(.text+0xca01c): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91wdt_suspend':
at91_adc.c:(.text+0xca038): undefined reference to `at91_st_base'
drivers/built-in.o: In function `at91_wdt_open':
at91_adc.c:(.text+0xca0cc): undefined reference to `at91_st_base'
drivers/built-in.o:at91_adc.c:(.text+0xca2c8): more undefined references to
`at91_st_base' follow
So, reverting the modification of the "depends" Kconfig line
introduced by patch a6a1bcd37 (watchdog: at91rm9200: add DT support)
seems to be the good solution.
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@iguana.be>
|
|
Pull SCSI target fixes from Nicholas Bellinger:
"Here are remaining target-pending items for v3.9-rc7 code.
The tcm_vhost patches are more than I'd usually include in a -rc7
pull, but are changes required for v3.9 to work correctly with the
pending vhost-scsi-pci QEMU upstream series merge. (Paolo CC'ed)
Plus Asias's conversion to use vhost_virtqueue->private_data + RCU for
managing vhost-scsi endpoints has gotten alot of review + testing over
the past weeks, and MST has ACKed the full series.
Also, there is a target patch to fix a long-standing bug within
control CDB handling with Standby/Offline/Transition ALUA port access
states, that had been incorrectly rejecting the control CDBs required
for LUN scan to work during these port group states. CC'ing to
stable."
* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
target: Fix incorrect fallthrough of ALUA Standby/Offline/Transition CDBs
tcm_vhost: Send bad target to guest when cmd fails
tcm_vhost: Add vhost_scsi_send_bad_target() helper
tcm_vhost: Fix tv_cmd leak in vhost_scsi_handle_vq
tcm_vhost: Remove double check of response
tcm_vhost: Initialize vq->last_used_idx when set endpoint
tcm_vhost: Use vq->private_data to indicate if the endpoint is setup
tcm_vhost: Use ACCESS_ONCE for vs->vs_tpg[target] access
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI fixes from James Bottomley:
"This is a set of ten bug fixes (and two consisting of copyright year
update and version number change) pretty much all of which involve
either a crash or a hang except the removal of the random sleep from
the qla2xxx driver (which is a coding error so bad, we want it gone
before anyone has a chance to copy it)."
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
[SCSI] lpfc: fix potential NULL pointer dereference in lpfc_sli4_rq_put()
[SCSI] libsas: fix handling vacant phy in sas_set_ex_phy()
[SCSI] ibmvscsi: Fix slave_configure deadlock
[SCSI] qla2xxx: Update the driver version to 8.04.00.13-k.
[SCSI] qla2xxx: Remove debug code that msleeps for random duration.
[SCSI] qla2xxx: Update copyright dates information in LICENSE.qla2xxx file.
[SCSI] qla2xxx: Fix crash during firmware dump procedure.
[SCSI] Revert "qla2xxx: Add setting of driver version string for vendor application."
[SCSI] ipr: dlpar failed when adding an adapter back
[SCSI] ipr: fix addition of abort command to HRRQ free queue
[SCSI] st: Take additional queue ref in st_probe
[SCSI] libsas: use right function to alloc smp response
[SCSI] ipr: ipr_test_msi() fails when running with msi-x enabled adapter
|
|
Driver's and ->fill_modes functions are allowed to grab crtc mutexes
(for e.g. load detect). Hence we need to first only grab the general
kms mutex, and only in a second step grab all locks to do the
modesets.
This prevents a deadlock on my gm45 in the tv load detect code called
by drm_helper_probe_single_connector_modes.
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Don't oops seems proper.
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Pull slave-dmaengine fixes from Vinod Koul:
"The first one fixes issue in pl330 to check for DT compatible and
the second one fixes omap-dma to start without delay"
* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
dmaengine: omap-dma: Start DMA without delay for cyclic channels
DMA: PL330: Add check if device tree compatible
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fixes from Rafael Wysocki:
- System reboot/halt fix related to CPU offline ordering from Huacai
Chen.
- intel_pstate driver fix for a delay time computation error
occasionally crashing systems using it from Dirk Brandewie.
* tag 'pm-3.9-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
PM / reboot: call syscore_shutdown() after disable_nonboot_cpus()
cpufreq / intel_pstate: Set timer timeout correctly
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap
Pull regmap revert from Mark Brown:
"regmap: Back out work buffer fix
This reverts commit bc8ce4 (regmap: don't corrupt work buffer in
_regmap_raw_write()) since it turns out that it can cause issues when
taken in isolation from the other changes in -next that lead to its
discovery. On the basis that nobody noticed the problems for quite
some time without that subsequent work let's drop it from v3.9."
* tag 'regmap-v3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Back out work buffer fix
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio
Pull GPIO fix from Linus Walleij:
"Oneliner fix for the PCA 953x driver."
* tag 'gpio-fixes-v3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-gpio:
gpio: pca953x: fix irq_domain_add_simple usage
|
|
The dereference to 'put_index' should be moved below the NULL test.
Signed-off-by: Wei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: James Smart <james.smart@emulex.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
|
|
We actually have to pass chip as the host_data parameter of
irq_domain_add_simple() as later on, it is used to initialize chip_data
in pca953x_gpio_irq_map(). Failing to do so is leading to a NULL pointer
dereference after calling irq_data_get_irq_chip_data() in
pca953x_irq_mask(), pca953x_irq_unmask(), pca953x_irq_bus_lock(),
pca953x_irq_bus_sync_unlock() and pca953x_irq_set_type().
Fixes regression introduced by commit
0e8f2fdacf1d44651aa7e57063c76142d1f4988b (gpio: pca953x: use simple
irqdomain)
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Acked-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
|
|
This patch fixes a bug where a handful of informational / control CDBs
that should be allowed during ALUA access state Standby/Offline/Transition
where incorrectly returning CHECK_CONDITION + ASCQ_04H_ALUA_TG_PT_*.
This includes INQUIRY + REPORT_LUNS, which would end up preventing LUN
registration when LUN scanning occured during these ALUA access states.
Cc: Hannes Reinecke <hare@suse.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
Send bad target to guest in case:
1) we can not allocate the cmd
2) fail to submit the cmd
Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
Share the send bad target code with other use cases.
Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
If we fail to submit the allocated tv_vmd to tcm_vhost_submission_work,
we will leak the tv_vmd. Free tv_vmd on fail path.
Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
We did the length of response check twice.
Signed-off-by: Asias He <asias@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc fix from Greg Kroah-Hartman:
"Here is a single Kconfig dependancy build fix for 3.9.
It's been in linux-next for a while, and fixes a problem that has been
reported multiple times."
* tag 'char-misc-3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
misc/vmw_vmci: Add dependency on CONFIG_NET
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial fixes from Greg Kroah-Hartman:
"Here are 4 small tty/serial fixes for 3.9.
One fixes a bug where we broke the documentation build, and the others
fix reported problems in some serial drivers.
All have been in linux-next for a while"
* tag 'tty-3.9-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: mxser: fix cycle termination condition in mxser_probe() and mxser_module_init()
Revert "tty/8250_pnp: serial port detection regression since v3.7"
OMAP/serial: Revert bad fix of Rx FIFO threshold granularity
tty: Documentation: fix a path in a DocBook template
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen
Pull Xen fixes from Konrad Rzeszutek Wilk:
"Two bug-fixes:
- Early bootup issue found on DL380 machines
- Fix for the timer interrupt not being processed right awaym leading
to quite delayed time skew on certain workloads"
* tag 'stable/for-linus-3.9-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
xen/mmu: On early bootup, flush the TLB when changing RO->RW bits Xen provided pagetables.
xen/events: Handle VIRQ_TIMER before any other hardirq in event loop.
|
|
Pull networking fixes from David Miller:
1) cfg80211_conn_scan() must be called with the sched_scan_mutex, fix
from Artem Savkov.
2) Fix regression in TCP ICMPv6 processing, we do not want to treat
redirects as socket errors, from Christoph Paasch.
3) Fix several recvmsg() msg_name kernel memory leaks into userspace,
in ATM, AX25, Bluetooth, CAIF, IRDA, s390 IUCV, L2TP, LLC, Netrom,
NFC, Rose, TIPC, and VSOCK. From Mathias Krause and Wei Yongjun.
4) Fix AF_IUCV handling of segmented SKBs in recvmsg(), from Ursula
Braun and Eric Dumazet.
5) CAN gw.c code does kfree() on SLAB cache memory, use
kmem_cache_free() instead. Fix from Wei Yongjun.
6) Fix LSM regression on TCP SYN/ACKs, some LSMs such as SELINUX want
an skb->sk socket context available for these packets, but nothing
else requires it. From Eric Dumazet and Paul Moore.
7) Fix ipv4 address lifetime processing so that we don't perform
sleepable acts inside of rcu_read_lock() sections, do them in an
rtnl_lock() section instead. From Jiri Pirko.
8) mvneta driver accidently sets HW features after device registry, it
should do so beforehand. Fix from Willy Tarreau.
9) Fix bonding unload races more correctly, from Nikolay Aleksandrov
and Veaceslav Falico.
10) rtnl_dump_ifinfo() and rtnl_calcit() invoke nlmsg_parse() with wrong
header size argument. Fix from Michael Riesch.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (44 commits)
lsm: add the missing documentation for the security_skb_owned_by() hook
bnx2x: Prevent null pointer dereference in AFEX mode
e100: Add dma mapping error check
selinux: add a skb_owned_by() hook
can: gw: use kmem_cache_free() instead of kfree()
netrom: fix invalid use of sizeof in nr_recvmsg()
qeth: fix qeth_wait_for_threads() deadlock for OSN devices
af_iucv: fix recvmsg by replacing skb_pull() function
rtnetlink: Call nlmsg_parse() with correct header length
bonding: fix bonding_masters race condition in bond unloading
Revert "bonding: remove sysfs before removing devices"
net: mvneta: enable features before registering the driver
hyperv: Fix RNDIS send_completion code path
hyperv: Fix a kernel warning from netvsc_linkstatus_callback()
net: ipv4: fix schedule while atomic bug in check_lifetime()
net: ipv4: reset check_lifetime_work after changing lifetime
bnx2x: Fix KR2 rapid link flap
sctp: remove 'sridhar' from maintainers list
VSOCK: Fix missing msg_namelen update in vsock_stream_recvmsg()
VSOCK: vmci - fix possible info leak in vmci_transport_dgram_dequeue()
...
|
|
The cnic module is responsible for initializing various bnx2x structs
via callbacks provided by the bnx2x module.
One such struct is the queue object for the FCoE queue.
If a device is working in AFEX mode and its configuration allows FCoE yet
the cnic module is not loaded, it's very likely a null pointer dereference
will occur, as the bnx2x will erroneously access the FCoE's queue object.
Prevent said access until cnic properly registers itself.
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com>
Signed-off-by: Ariel Elior <ariele@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
e100 uses pci_map_single, but fails to check for a dma mapping error after its
use, resulting in a stack trace:
[ 46.656594] ------------[ cut here ]------------
[ 46.657004] WARNING: at lib/dma-debug.c:933 check_unmap+0x47b/0x950()
[ 46.657004] Hardware name: To Be Filled By O.E.M.
[ 46.657004] e100 0000:00:0e.0: DMA-API: device driver failed to check map
error[device address=0x000000007a4540fa] [size=90 bytes] [mapped as single]
[ 46.657004] Modules linked in:
[ 46.657004] w83627hf hwmon_vid snd_via82xx ppdev snd_ac97_codec ac97_bus
snd_seq snd_pcm snd_mpu401 snd_mpu401_uart ns558 snd_rawmidi gameport parport_pc
e100 snd_seq_device parport snd_page_alloc snd_timer snd soundcore skge shpchp
k8temp mii edac_core i2c_viapro edac_mce_amd nfsd auth_rpcgss nfs_acl lockd
sunrpc binfmt_misc uinput ata_generic pata_acpi radeon i2c_algo_bit
drm_kms_helper ttm firewire_ohci drm firewire_core pata_via sata_via i2c_core
sata_promise crc_itu_t
[ 46.657004] Pid: 792, comm: ip Not tainted 3.8.0-0.rc6.git0.1.fc19.x86_64 #1
[ 46.657004] Call Trace:
[ 46.657004] <IRQ> [<ffffffff81065ed0>] warn_slowpath_common+0x70/0xa0
[ 46.657004] [<ffffffff81065f4c>] warn_slowpath_fmt+0x4c/0x50
[ 46.657004] [<ffffffff81364cfb>] check_unmap+0x47b/0x950
[ 46.657004] [<ffffffff8136522f>] debug_dma_unmap_page+0x5f/0x70
[ 46.657004] [<ffffffffa030f0f0>] ? e100_tx_clean+0x30/0x210 [e100]
[ 46.657004] [<ffffffffa030f1a8>] e100_tx_clean+0xe8/0x210 [e100]
[ 46.657004] [<ffffffffa030fc6f>] e100_poll+0x56f/0x6c0 [e100]
[ 46.657004] [<ffffffff8159dce1>] ? net_rx_action+0xa1/0x370
[ 46.657004] [<ffffffff8159ddb2>] net_rx_action+0x172/0x370
[ 46.657004] [<ffffffff810703bf>] __do_softirq+0xef/0x3d0
[ 46.657004] [<ffffffff816e4ebc>] call_softirq+0x1c/0x30
[ 46.657004] [<ffffffff8101c485>] do_softirq+0x85/0xc0
[ 46.657004] [<ffffffff81070885>] irq_exit+0xd5/0xe0
[ 46.657004] [<ffffffff816e5756>] do_IRQ+0x56/0xc0
[ 46.657004] [<ffffffff816dacb2>] common_interrupt+0x72/0x72
[ 46.657004] <EOI> [<ffffffff816da1eb>] ?
_raw_spin_unlock_irqrestore+0x3b/0x70
[ 46.657004] [<ffffffff816d124d>] __slab_free+0x58/0x38b
[ 46.657004] [<ffffffff81214424>] ? fsnotify_clear_marks_by_inode+0x34/0x120
[ 46.657004] [<ffffffff811b0417>] ? kmem_cache_free+0x97/0x320
[ 46.657004] [<ffffffff8157fc14>] ? sock_destroy_inode+0x34/0x40
[ 46.657004] [<ffffffff8157fc14>] ? sock_destroy_inode+0x34/0x40
[ 46.657004] [<ffffffff811b0692>] kmem_cache_free+0x312/0x320
[ 46.657004] [<ffffffff8157fc14>] sock_destroy_inode+0x34/0x40
[ 46.657004] [<ffffffff811e8c28>] destroy_inode+0x38/0x60
[ 46.657004] [<ffffffff811e8d5e>] evict+0x10e/0x1a0
[ 46.657004] [<ffffffff811e9605>] iput+0xf5/0x180
[ 46.657004] [<ffffffff811e4338>] dput+0x248/0x310
[ 46.657004] [<ffffffff811ce0e1>] __fput+0x171/0x240
[ 46.657004] [<ffffffff811ce26e>] ____fput+0xe/0x10
[ 46.657004] [<ffffffff8108d54c>] task_work_run+0xac/0xe0
[ 46.657004] [<ffffffff8106c6ed>] do_exit+0x26d/0xc30
[ 46.657004] [<ffffffff8109eccc>] ? finish_task_switch+0x7c/0x120
[ 46.657004] [<ffffffff816dad58>] ? retint_swapgs+0x13/0x1b
[ 46.657004] [<ffffffff8106d139>] do_group_exit+0x49/0xc0
[ 46.657004] [<ffffffff8106d1c4>] sys_exit_group+0x14/0x20
[ 46.657004] [<ffffffff816e3b19>] system_call_fastpath+0x16/0x1b
[ 46.657004] ---[ end trace 4468c44e2156e7d1 ]---
[ 46.657004] Mapped at:
[ 46.657004] [<ffffffff813663d1>] debug_dma_map_page+0x91/0x140
[ 46.657004] [<ffffffffa030e8eb>] e100_xmit_prepare+0x12b/0x1c0 [e100]
[ 46.657004] [<ffffffffa030c924>] e100_exec_cb+0x84/0x140 [e100]
[ 46.657004] [<ffffffffa030e56a>] e100_xmit_frame+0x3a/0x190 [e100]
[ 46.657004] [<ffffffff8159ee89>] dev_hard_start_xmit+0x259/0x6c0
Easy fix, modify the cb paramter to e100_exec_cb to return an error, and do the
dma_mapping_error check in the obvious place
This was reported previously here:
http://article.gmane.org/gmane.linux.network/257893
But nobody stepped up and fixed it.
CC: Josh Boyer <jwboyer@redhat.com>
CC: e1000-devel@lists.sourceforge.net
Signed-off-by: Neil Horman <nhorman@tuxdriver.com>
Reported-by: Michal Jaegermann <michal@harddata.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
cyclic DMA is only used by audio which needs DMA to be started without a
delay.
If the DMA for audio is started using the tasklet we experience random
channel switch (to be more precise: channel shift).
Reported-by: Peter Meerwald <pmeerw@pmeerw.net>
CC: stable@vger.kernel.org # v3.7+
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
|
|
Pull crypto fixes from Herbert Xu:
"This fixes a GCM bug that breaks IPsec and a compile problem in
ux500."
* git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ux500 - add missing comma
crypto: gcm - fix assumption that assoc has one segment
|
|
Pull drm fixes from Dave Airlie:
"Just a spare semicolon in nouveau that caused some issues, and an
mgag200 fix"
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
drm/mgag200: Index 24 in extended CRTC registers is 24 in hex, not decimal.
drm/nouveau: fix unconditional return waiting on memory
|
|
This change properly enables the "requester" in G200ER cards that is
responsible for getting pixels out of memory and clocking them out to
the screen.
Signed-off-by: Christopher Harvey <charvey@matrox.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
|
|
Pull vfio overflow fix from Alex Williamson.
* tag 'vfio-v3.9-rc7' of git://github.com/awilliam/linux-vfio:
vfio-pci: Fix possible integer overflow
|
