summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-04-12r6040: update copyright from 2007 to nowFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-12r6040: define and use bits of register PHY_CCFlorian Fainelli
Define and use the bits of the PHY_CC (status change configuration) register. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-12r6040: define and use MTPR transmit enable bitFlorian Fainelli
Define MTPR bit 0 of the register and use it where it is appropriate. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-12r6040: define and use MLSR register bitsFlorian Fainelli
Define the MLSR (MAC Last Status Register bits) for: - tx fifo under-run - tx exceed collision - tx late collision Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-12r6040: fix typo on stats update in tx pathFlorian Fainelli
We are currently updating the rx fifo error counter in the tx path while it should have been the tx fifo error counter, fix that. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-12r6040: add a MAC operation timeout defineFlorian Fainelli
2048 is the usual value for busy-waiting on a register r/w, define it as MAC_DEF_TIMEOUT and use it where it is appropriate. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-12r6040: remove unused variable mcr1 from private structureFlorian Fainelli
Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-12r6040: consolidate MAC reset to its own functionFlorian Fainelli
The reset of the MAC is currently done identically from two places and one place is not waiting for the MAC_SM bit to be set after reset. Everytime the MAC is software resetted a state machine is also needed so consolidate the reset to its own function. Signed-off-by: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-12ixp4xx_eth: Fix up the get_ts_info ethtool method.Richard Cochran
Commit e77bd1ec121ee4163a6b42a44e87b2e382c39e04 added support for a new ethtool function, but that cannot compile due to a misnamed global variable. Not that it really matters (since the IXP4xx does compile either, as of about Linux 3.1) but just in case, this patch fixes the misnamed variable in the PHC driver. Signed-off-by: Richard Cochran <richardcochran@gmail.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-12wiznet: Add missing #include <linux/irq.h>Geert Uytterhoeven
m68k/allmodconfig: drivers/net/ethernet/wiznet/w5100.c: In function ‘w5100_hw_probe’: drivers/net/ethernet/wiznet/w5100.c:680: error: ‘IRQ_TYPE_LEVEL_LOW’ undeclared (first use in this function) drivers/net/ethernet/wiznet/w5300.c: In function ‘w5300_hw_probe’: drivers/net/ethernet/wiznet/w5300.c:594: error: ‘IRQ_TYPE_LEVEL_LOW’ undeclared (first use in this function) Include <linux/irq.h>, which provides the declaration for IRQ_TYPE_LEVEL_LOW. Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-12drivers/net: Remove CONFIG_WIZNET_TX_FLOW optionMike Sinkovsky
This option was there for debugging race conditions, just remove it, and assume TX_FLOW is always enabled. Signed-off-by: Mike Sinkovsky <msink@permonline.ru> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11team: add missed "statics"Jiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11team: ab: walk through port list non-rcuJiri Pirko
Since team->lock is being held, _rcu variant make no sense. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11team: add user_linkup and user_linkup_enabled per-port optionJiri Pirko
Allows userspace to setup linkup for ports. Default is to take linkup directly from ethtool state. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11team: add bool option typeJiri Pirko
Add another (hopefully last) option type. Use NLA_FLAG to implement that. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-11team: add support for per-port optionsJiri Pirko
This patch allows to create per-port options. That becomes handy for all sorts of stuff, for example for userspace driven link-state, 802.3ad implementation and so on. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-10Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netDavid S. Miller
2012-04-10wiznet: Fix Kconfig dependencies.David S. Miller
Both drivers need to depend upon HAS_IOMEM, otherwise we get a build failure on platforms like S390. All the driver specific config options need to depend upon the drivers themselves. Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-07fealnx: Remove unused local label 'out' in netdev_open().David S. Miller
Signed-off-by: David S. Miller <davem@davemloft.net>
2012-04-07ipw2100: remove useless tests in the PCI device remove path.Francois Romieu
Everything has been set up in the PCI probe function. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Stanislav Yakovlev <stas.yakovlev@gmail.com>
2012-04-07ipw2100: stop using net_device.base_addr.Francois Romieu
No net_device.irq removal yet. The driver probe, remove and failure paths need some care beforehand. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Stanislav Yakovlev <stas.yakovlev@gmail.com>
2012-04-07ipw2200: stop using net_device.{base_addr, irq}.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Stanislav Yakovlev <stas.yakovlev@gmail.com>
2012-04-07rrunner: stop using net_device.{base_addr, irq}.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2012-04-07myri10ge: stop using net_device.{base_addr, irq}.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Jon Mason <mason@myri.com> Acked-by: Andrew Gallatin <gallatin@myri.com>
2012-04-07sis900: stop using net_device.{base_addr, irq} and convert to __iomem.Francois Romieu
- pci_resource_start() can be removed from sis900_get_mac_addr() because the IO range is maped and stored into the device private struct early in the device probe function. - the driver contains a few direct accesses to low IO ports that forbid to re(#)define the usual out{l, w, b} macros. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Daniele Venzano <venza@brownhat.org>
2012-04-07dmfe: stop using net_device.{base_addr, irq} and convert to __iomem.Francois Romieu
This is a pure PCI driver, no ISA here. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Acked-by: Grant Grundler <grundler@parisc-linux.org>
2012-04-07epic100: stop using net_device.{base_addr, irq} and convert to __iomem.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2012-04-07uli526x: stop using net_device.{base_addr, irq} and convert to __iomem.Francois Romieu
The bulk of the patch comes from the __iomem changes. - the phy read and write operations were carrying the chip id deep down the call chain. Let's waste a pointer and contain the flying spaghetti monster. - phy_{read, write}_1bit only need to access the DCR9 register. The loss of generality here should not hurt. - removed a leftover printk of the EISA era. This is a pure PCI device. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Acked-by: Grant Grundler <grundler@parisc-linux.org>
2012-04-07dl2k: stop using net_device.{base_addr, irq} and convert to __iomem.Francois Romieu
The eeprom registers always use the same PCI bar whereas the general registers may either use the same mapping as the eeprom registers or a different one. It is thus possible to simplify parse_eeprom(). Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2012-04-078139too: dev->{base_addr, irq} removal.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2012-04-07natsemi: stop using net_device.{base_addr, irq}.Francois Romieu
It's useless to check mem_start on a newly allocated device. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Tim Hockin <thockin@hockin.org>
2012-04-07smsc9420: stop using net_device.{base_addr, irq}.Francois Romieu
The device private data pointer can not be NULL in smsc9420_open(). Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Steve Glendinning <steve.glendinning@smsc.com>
2012-04-07de2104x: stop using net_device.{base_addr, irq}.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Acked-by: Grant Grundler <grundler@parisc-linux.org>
2012-04-07xircom_cb: stop using net_device.{base_addr, irq} and convert to __iomem.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Acked-by: Grant Grundler <grundler@parisc-linux.org>
2012-04-07xircom_cb: fix device probe error path.Francois Romieu
- unbalanced pci_disable_device - PCI ressources were not released - mismatching pci_alloc_.../kfree pairs are replaced by DMA alloc helpers. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Ack-by: Grant Grundler <grundler@parisc-linux.org>
2012-04-07uli526x: fix regions leak in driver probe error path.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Ack-by: Grant Grundler <grundler@parisc-linux.org>
2012-04-07sunhme: stop using net_device.{base_addr, irq}.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2012-04-07tulip_core: stop using net_device.{base_addr, irq}.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Ack-by: Grant Grundler <grundler@parisc-linux.org>
2012-04-07sis190: stop using net_device.{base_addr, irq}Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2012-04-07sc92031: stop using net_device.{base_addr, irq}Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2012-04-07winbond840: stop using net_device.{base_addr, irq}.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2012-04-07bnx2: stop using net_device.{base_addr, irq}.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Acked-by: Michael Chan <mchan@broadcom.com>
2012-04-07starfire: remove deprecated options.Francois Romieu
Some settings are duplicated between ethtool link management and module options. The latter is trimmed. The half duplex, speed and autonegotiation defaults are kept unchanged. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Ion Badulescu <ionut@badula.org>
2012-04-07starfire: stop using net_device.{base_addr, irq}.Francois Romieu
It's useless to check mem_start on a newly allocated device as well. Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Ion Badulescu <ionut@badula.org>
2012-04-07yellowfin: stop using net_device.{base_addr, irq}.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2012-04-078139cp: stop using net_device.{base_addr, irq}.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2012-04-07s2io: stop using net_device.{base_addr, irq}.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Jon Mason <jdmason@kudzu.us>
2012-04-07atl1e: stop using net_device.{base_addr, irq}.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Jay Cliburn <jcliburn@gmail.com> Cc: Chris Snook <chris.snook@gmail.com>
2012-04-07fealnx: stop using net_device.{base_addr, irq}.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
2012-04-07vxge: stop using net_device.{base_addr, irq}.Francois Romieu
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com> Cc: Jon Mason <jdmason@kudzu.us>
generated by cgit v0.10.2 at 2024-11-20 10:35:46 (GMT)