summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-01-22skge: check for PCI dma mapping errorsstephen hemminger
Driver should check for mapping errors. Machines with limited DMA maps may return an error when a PCI map is requested (not an issue on standard x86). Also use upper/lower 32 bits macros for clarity. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22skge: don't assert carrier until link is upstephen hemminger
Skge device would assert carrier (link up) as soon as network device open was called, rather than waiting until PHY has detected link. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22mlx4_core: map async events to arbitrary slave eqsMarcel Apfelbaum
Slave async events were mapped to single eq. This patch fixes this issue, so the slaves can map the async events to any eq. Signed-off-by: Marcel Apfelbaum <marcela@dev.mellanox.co.il> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22mlx4_core: Fix mtt profile issueMarcel Apfelbaum
Num mtts from profile is really the number of mtt segments. Thus, in make profile, to get the proper number of MTT entries, must multiply num_mtts by mtts per segment. Signed-off-by: Marcel Apfelbaum <marcela@dev.mellanox.co.il> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22mlx4_core: removed function index from vf.Marcel Apfelbaum
The Virtual Functions should not be aware their function number. Signed-off-by: Marcel Apfelbaum <marcela@dev.mellanox.co.il> Reviewed-by: Jack Morgenstein <jackm@dev.mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22mlx4_en: eth statistics modificationEugenia Emantayev
In native mode display all available staticstics. In SRIOV mode on VF display only SW counters statistics, in SRIOV mode on hypervisor display SW counters and errors (got from FW) statistics. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22mlx4: VF is not allowed to perform dump statsEugenia Emantayev
In multifunction mode - DUMP_STATS command is not executed for VFs. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-22mlx4_en: clear all eth statistics when port goes upEugenia Emantayev
Bug fix: Not all stats fields were cleared. Signed-off-by: Eugenia Emantayev <eugenia@mellanox.co.il> Reviewed-by: Yevgeny Petriln <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-20enic: fix compile when CONFIG_PCI_IOV is not enabledRoopa Prabhu
reverting back change that access enic->num_vfs outside CONFIG_PCI_IOV Reported-by: Randy Dunlap <rdunlap@xenotime.net> Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-19ixgbevf: make operations tables constStephen Hemminger
The arrays of function pointers should be const to make life harder for rootkits. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-19ixgbevf: fix sparse warningsStephen Hemminger
Fixes sparse warnings: drivers/net/ethernet/intel/ixgbevf/vf.c:418:21: warning: symbol 'ixgbevf_82599_vf_info' was not declared. Should it be static? drivers/net/ethernet/intel/ixgbevf/vf.c:423:21: warning: symbol 'ixgbevf_X540_vf_info' was not declared. Should it be static? drivers/net/ethernet/intel/ixgbevf/mbx.c:331:29: warning: symbol 'ixgbevf_mbx_ops' was not declared. Should it be static? Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-19ixgbevf: make ethtool ops and strings constStephen Hemminger
Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-19ixgbevf: Prevent possible race condition by checking for messageGreg Rose
The mailbox interrupt routine might cause a race condition sometimes and cause a message to be missed. Signed-off-by: Greg Rose <gregory.v.rose@intel.com> Tested-by: Sibai Li <sibai.li@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-19ixgbe: Fix register defines to correctly handle complex expressionsAlexander Duyck
This patch is meant to address possible issues with the IXGBE register defines generating incorrect values when given a complex expression for the register offset. Signed-off-by: Alexander Duyck <alexander.h.duyck@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-19igbvf: Remove unnecessary irq disable/enableMitch A Williams
This irq disable/enable pair used to wrap access to the driver's vlgrp struct, which is no longer present. So, then, this could also so no longer be present. Signed-off-by: Mitch Williams <mitch.a.williams@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-19igbvf: remove unneeded castStephen Hemminger
The cast and comment are unnecessary in the current upstream kernel. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Garrett, RobertX E <robertx.e.garrett@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-19igb: Update Copyright on all Intel copyrighted files.Carolyn Wyborny
Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-19igb: make local functions staticStephen Hemminger
Sparse caught two functions that were only being used in one file. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-19net: ftgmac100/ftmac100: add missing interrupt.h includeThomas Faber
Fixes compilation failure of these modules due to missing irqreturn_t type for the ft(g)mac100_interrupt definition. Signed-off-by: Thomas Faber <thfabba@gmx.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-19bonding: fix enslaving in alb mode when link downJiri Bohac
bond_alb_init_slave() is called from bond_enslave() and sets the slave's MAC address. This is done differently for TLB and ALB modes. bond->alb_info.rlb_enabled is used to discriminate between the two modes but this flag may be uninitialized if the slave is being enslaved prior to calling bond_open() -> bond_alb_initialize() on the master. It turns out all the callers of alb_set_slave_mac_addr() pass bond->alb_info.rlb_enabled as the hw parameter. This patch cleans up the unnecessary parameter of alb_set_slave_mac_addr() and makes the function decide based on the bonding mode instead, which fixes the above problem. Reported-by: Narendra K <Narendra_K@Dell.com> Signed-off-by: Jiri Bohac <jbohac@suse.cz> Signed-off-by: Jay Vosburgh <fubar@us.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-18pch_gbe: Do not abort probe on bad MACDarren Hart
If the MAC is invalid or not implemented, do not abort the probe. Issue a warning and prevent bringing the interface up until a MAC is set manually (via ifconfig $IFACE hw ether $MAC). Tested on two platforms, one with a valid MAC, the other without a MAC. The real MAC is used if present, the interface fails to come up until the MAC is set on the other. They successfully get an IP over DHCP and pass a simple ping and login over ssh test. This is meant to allow the Inforce SYS940X development board: http://www.inforcecomputing.com/SYS940X_ECX.html (and others suffering from a missing MAC) to work with the mainline kernel. Without this patch, the probe will fail and the interface will not be created, preventing the user from configuring the MAC manually. This does not make any attempt to address a missing or invalid MAC for the pch_phub driver. Signed-off-by: Darren Hart <dvhart@linux.intel.com> CC: Arjan van de Ven <arjan@linux.intel.com> CC: Alan Cox <alan@linux.intel.com> CC: Tomoya MORINAGA <tomoya.rohm@gmail.com> CC: Jeff Kirsher <jeffrey.t.kirsher@intel.com> CC: "David S. Miller" <davem@davemloft.net> CC: Paul Gortmaker <paul.gortmaker@windriver.com> CC: Jon Mason <jdmason@kudzu.us> CC: netdev@vger.kernel.org CC: Mark Brown <broonie@opensource.wolfsonmicro.com> CC: David Laight <David.Laight@ACULAB.COM> CC: Joe Perches <joe@perches.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-18enic: fix location of vnic dev unregister in enic_probe cleanup codeRoopa Prabhu
The vnic_dev_unregister is erroneously under CONFIG_PCI_IOV. This patch moves it out of CONFIG_PCI_IOV Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-18enic: rearrange some of the port profile codeRoopa Prabhu
This patch rearranges some of the port profile code in enic_probe. It moves out some lines of port profile related code currently inside CONFIG_PCI_IOV. This is only done to move all port profile related code together so that it can help isolate the port profile handling code under a separate #ifdef in our internal build scripts. Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-18enic: Add sriov vf device id checks in port profile codeRoopa Prabhu
This patch adds checks for sriov vf's in enic port profile handling code. sriov vf's are same as dynamic vnics but with a different device id. Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-18enic: This patch adds pci id 0x71 for SRIOV VF'sRoopa Prabhu
This patch adds pci id 0x71 for sriov VF's. Signed-off-by: Roopa Prabhu <roprabhu@cisco.com> Signed-off-by: Christian Benvenuti <benve@cisco.com> Signed-off-by: Sujith Sankar <ssujith@cisco.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-18mlx4_en: set number of rx rings used by RSS using ethtoolYevgeny Petrilin
Value must be a power of 2 due to HW limitation. Driver supports only 'equal' mode in ethtool and can't be set by using weights. Signed-off-by: Amir Vadai <amirv@mellanox.co.il> Reviewed-by: Yevgeny Petrilin <yevgenyp@mellanox.co.il> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-18Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-01-18b43: add option to avoid duplicating device support with brcmsmacJohn W. Linville
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-18brcmsmac: fix tx queue flush infinite loopStanislaw Gruszka
This patch workaround live deadlock problem caused by infinite loop in brcms_c_wait_for_tx_completion(). I do not consider the patch as the proper fix, which should fix the real reason of tx queue flush failure, but patch helps with system lockup. Reference: https://bugzilla.kernel.org/show_bug.cgi?id=42576 Reported-and-tested-by: Patrick <ragamuffin@datacomm.ch> Cc: stable@vger.kernel.org # 3.2+ Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-18Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/netLinus Torvalds
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (47 commits) tg3: Fix single-vector MSI-X code openvswitch: Fix multipart datapath dumps. ipv6: fix per device IP snmp counters inetpeer: initialize ->redirect_genid in inet_getpeer() net: fix NULL-deref in WARN() in skb_gso_segment() net: WARN if skb_checksum_help() is called on skb requiring segmentation caif: Remove bad WARN_ON in caif_dev caif: Fix typo in Vendor/Product-ID for CAIF modems bnx2x: Disable AN KR work-around for BCM57810 bnx2x: Remove AutoGrEEEn for BCM84833 bnx2x: Remove 100Mb force speed for BCM84833 bnx2x: Fix PFC setting on BCM57840 bnx2x: Fix Super-Isolate mode for BCM84833 net: fix some sparse errors net: kill duplicate included header net: sh-eth: Fix build error by the value which is not defined net: Use device model to get driver name in skb_gso_segment() bridge: BH already disabled in br_fdb_cleanup() net: move sock_update_memcg outside of CONFIG_INET mwl8k: Fixing Sparse ENDIAN CHECK warning ...
2012-01-18tg3: Fix single-vector MSI-X codeMatt Carlson
Kdump kernels leave MSI-X interrupts (as setup by the crashed kernel) enabled. However, kdump only enables one CPU in the new environment, thus causing tg3 to abort MSI-X setup. When the driver attempts to enable INTA or MSI interrupt modes on a kdump kernel, interrupt delivery fails. This patch attempts to workaround the problem by forcing the driver to enable a single MSI-X interrupt. In such a configuration, the device's multivector interrupt mode must be disabled. Signed-off-by: Matt Carlson <mcarlson@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-18Merge branch 'next' of git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds
* 'next' of git://git.infradead.org/users/vkoul/slave-dma: (53 commits) ARM: mach-shmobile: specify CHCLR registers on SH7372 dma: shdma: fix runtime PM: clear channel buffers on reset dma/imx-sdma: save irq flags when use spin_lock in sdma_tx_submit dmaengine/ste_dma40: clear LNK on channel startup dmaengine: intel_mid_dma: remove legacy pm interface ASoC: mxs: correct 'direction' of device_prep_dma_cyclic dmaengine: intel_mid_dma: error path fix dmaengine: intel_mid_dma: locking and freeing fixes mtd: gpmi-nand: move to dma_transfer_direction mtd: fix compile error for gpmi-nand mmc: mxs-mmc: fix the dma_transfer_direction migration dmaengine: add DMA_TRANS_NONE to dma_transfer_direction dma: mxs-dma: Don't use CLKGATE bits in CTRL0 to disable DMA channels dma: mxs-dma: make mxs_dma_prep_slave_sg() multi user safe dma: mxs-dma: Always leave mxs_dma_init() with the clock disabled. dma: mxs-dma: fix a typo in comment DMA: PL330: Remove pm_runtime_xxx calls from pl330 probe/remove video i.MX IPU: Fix display connections i.MX IPU DMA: Fix wrong burstsize settings dmaengine/ste_dma40: allow fixed physical channel ... Fix up conflicts in drivers/dma/{Kconfig,mxs-dma.c,pl330.c} The conflicts looked pretty trivial, but I'll ask people to verify them.
2012-01-18[libata] ata_piix: Add Toshiba Satellite Pro A120 to the quirks listBenjamin Larsson
due to broken suspend functionality. Signed-off-by: Benjamin Larsson <benjamin@southpole.se> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-18[libata] add DVRTD08A and DVR-215 to NOSETXFER device quirk listVladimir LAVALLADE
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-18[libata] pata_bf54x: Support sg list in bmdma transfer.Sonic Zhang
BF54x on-chip ATAPI controller allows maximum 0x1fffe bytes to be transfered in one ATAPI transfer. So, set the max sg_tablesize to 4. Signed-off-by: Sonic Zhang <sonic.zhang@analog.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-18[libata] sata_fsl: fix the controller operating modeJerry Huang
Configure the FSL SATA controller to the preferred, enterprise mode. Signed-off-by: Yutaka Ando <r46913@freescale.com> Signed-off-by: Jerry Huang <Chang-Ming.Huang@freescale.com> CC: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-18[libata] enable ata port async suspendLin Ming
This saves devices suspend/resume time. Tested system suspend/resume with SATA IDE/AHCI mode 3 times. Below is the time took for devices suspend/resume. SATA mode vanilla-kernel patched-kernel --------- --------------------- --------------------- IDE suspend: 0.744 suspend: 0.432 (0.716, 0.768, 0.748) (0.440, 0.428, 0.428) resume: 5.084 resume: 2.209 (5.100, 5.064, 5.088) (2.168, 2.232, 2.228) AHCI: suspend: 0.725 suspend: 0.449 (0.740, 0.708, 0.728) (0.456, 0.448, 0.444) resume: 2.556 resume: 1.896 (2.604, 2.492, 2.572) (1.932, 1.872, 1.884) Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2012-01-17Merge branch 'stable/for-linus-fixes-3.3' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen * 'stable/for-linus-fixes-3.3' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen: xen/balloon: Move the registration from device to subsystem.
2012-01-17Merge branch 'next' of git://git.monstr.eu/linux-2.6-microblazeLinus Torvalds
* 'next' of git://git.monstr.eu/linux-2.6-microblaze: USB: EHCI: Don't use NO_IRQ in xilinx ehci driver microblaze: Add topology init
2012-01-17Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless
2012-01-17bnx2x: Disable AN KR work-around for BCM57810Yaniv Rosner
Disable the work-around for the autoneg KR of the BCM57810 in case the Warpcore version is 0xD108 and above, which fixes this problem. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17bnx2x: Remove AutoGrEEEn for BCM84833Yaniv Rosner
Disable the autoGrEEEn feature for BCM84833. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17bnx2x: Remove 100Mb force speed for BCM84833Yaniv Rosner
Remove unsupported speed of 100Mb force for BCM84833 due to hardware limitation. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17bnx2x: Fix PFC setting on BCM57840Yaniv Rosner
This patch handles the second port of a path in a 4-port device of BCM57840. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17bnx2x: Fix Super-Isolate mode for BCM84833Yaniv Rosner
The Super-Isolate mode comes to isolate the BCM84833 PHY from the outside world. Not doing it correctly, made link partner see the link before the driver was loaded. This patch also involves SPIROM version fixes since it is used to determine whether the common init of the PHY was already executed, and the common init of this PHY is partially responsible for setting the Super-Isolate mode. Signed-off-by: Yaniv Rosner <yanivr@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17net: sh-eth: Fix build error by the value which is not definedNobuhiro Iwamatsu
----- drivers/net/ethernet/renesas/sh_eth.c:1706: error: 'pdid' undeclared (first use in this function) drivers/net/ethernet/renesas/sh_eth.c:1706: error: (Each undeclared identifier is reported only once drivers/net/ethernet/renesas/sh_eth.c:1706: error: for each function it appears in.) make[5]: *** [drivers/net/ethernet/renesas/sh_eth.o] Error 1 ----- Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com> CC: Florian Fainelli <florian@openwrt.org> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-01-17mwl8k: Fixing Sparse ENDIAN CHECK warningYogesh Ashok Powar
Fixing following sparse warning >drivers/net/wireless/mwl8k.c:2780:15: warning: incorrect type in assignment (different base types) >drivers/net/wireless/mwl8k.c:2780:15: expected restricted unsigned short [usertype] channel >drivers/net/wireless/mwl8k.c:2780:15: got unsigned short [unsigned] [usertype] hw_value Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17mwl8k: fix condition in mwl8k_cmd_encryption_remove_key()Dan Carpenter
The intent here was to check whether key->cipher was WEP40 or WEP104. We do a similar check correctly in several other places in this file. The current condition is always true. Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17brcmfmac: work-around gcc 4.7 build issueAlexandre Oliva
Alexandre Oliva <oliva@lsd.ic.unicamp.br> says: "It's an issue brought about by GCC 4.7's partial-inlining, that ends up splitting the udelay function just at the wrong spot, in such a way that some sanity checks for constants fails, and we end up calling bad_udelay. This patch fixes the problem. Feel free to push it upstream if it makes sense to you." Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-01-17ehea: make some functions and variables staticThadeu Lima de Souza Cascardo
Some functions and variables in ehea are only used in their own file, so they should be static. One particular function had a very generic name, print_error_data. Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@linux.vnet.ibm.com> Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v0.10.2 at 2024-07-07 10:51:01 (GMT)