summaryrefslogtreecommitdiff
path: root/drivers
AgeCommit message (Collapse)Author
2012-06-25netxen: Error return off by one for XG port.Santosh Nayak
There are NETXEN_NIU_MAX_XG_PORTS ports. Port indexing starts from zero. Hence we should also return error for 'port == NETXEN_NIU_MAX_XG_PORTS'. Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
2012-06-25netxen: Error return off by one in 'netxen_nic_set_pauseparam()'.Santosh Nayak
There are 'NETXEN_NIU_MAX_GBE_PORTS' GBE ports. Port indexing starts from zero. Hence we should also return error for "port == NETXEN_NIU_MAX_GBE_PORTS" Signed-off-by: Santosh Nayak <santoshprasadnayak@gmail.com>
2012-06-23bnx2x: link module eepromYuval Mintz
Add the ethtool functionality of accessing optic modules' information and eeprom to the bnx2x driver. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-23bnx2x: 1G sfp+ module handlingYuval Mintz
Automatically lower requested link speed to 1G in case 1G SFP+ module is detected. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-23bnx2x: revised link register accessYuval Mintz
This is a semantic change, cleaning some sections in which the bnx2x handles the phy's registers. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-23bnx2x: treat 0 speed as link down (copper)Yuval Mintz
Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-23bnx2x: link cleanupYuval Mintz
This patch does several things: 1. Add static to function when possible. 2. Correct comments. 3. Change msleep(small) --> usleep_range(small, small*2). Also correct existing calls to usleep_range. 4. Remove dead code. 5. Change 'if(rc != 0)' --> if(rc) Most of these changes are purely semantic. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Yaniv Rosner <yaniv.rosner@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-23bnx2x: sfp+ Tx fault detection addedYuval Mintz
Adds the ability to identify sfp+ modules' Tx fault, and when such occur shut down the link. Signed-off-by: Yuval Mintz <yuvalmin@broadcom.com> Signed-off-by: Eilon Greenstein <eilong@broadcom.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-23smsc911x.c: encapsulate enable irq callsMatthias Brugger
We encapsulate enbale irq functionality in a function call. As on probe the interrupts will be disabled twice, we delete one. Signed-off-by: Matthias Brugger <mbrugger@iseebcn.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-21ixgbe: simplify padding and length checksStephen Hemminger
The check for length <= 0 is bogus because length is unsigned, and network stack never sends zero length packets (unless it is totally broken). The check for really small packets can be optimized (using unlikely) and calling skb_pad directly. Signed-off-by: Stephen Hemminger <shemminger@vyatta.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-20Merge branch 'master' of ↵David S. Miller
git://git.kernel.org/pub/scm/linux/kernel/git/jkirsher/net-next
2012-06-20team: do RCU update path fixupsJiri Pirko
Use rcu_access_pointer and rcu_dereference_protected to access RCU pointer by updater. Use RCU_INIT_POINTER for NULL assignment of RCU pointer. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Acked-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-20team: Revert previous two changes.David S. Miller
I didn't notice that these were superceded by a more uptodate version of the changes. Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-20team: use RCU_INIT_POINTER for NULL assignment of RCU pointerJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-20team: use rcu_access_pointer to access RCU pointer by writerJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-20can: c_can_pci: fix compilation on non HAVE_CLK archsMarc Kleine-Budde
In commit: 5b92da0 c_can_pci: generic module for C_CAN/D_CAN on PCI the c_can_pci driver has been added. It uses clk_*() functions resulting in a link error on archs without clock support. This patch removed these clk_() functions as these parts of the driver are not tested. Cc: Federico Vaga <federico.vaga@gmail.com> Signed-off-by: Marc Kleine-Budde <mkl@pengutronix.de> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-20ixgbe: clean up ixgbe_get_settings ethtool functionJacob Keller
This patch cleans up the method used for determining the link speed of devices. The old method re-wrote some logic already existing in a mac.ops function which should be used instead. The result is much simpler to understand and removes a strange double-check of logic, as well as reducing code redundancy. Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-20ixgbe: add support for 1G SX modulesJacob Keller
This patch adds support for 1G Fiber PHY modules (SFP+ modules). This support comes along side support for 1G Copper PHY modules, but uses a different PHY type (ixgbe_sfp_type_1g_sx_core). Signed-off-by: Jacob Keller <jacob.e.keller@intel.com> Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-20igb: Version bumpCarolyn Wyborny
This patch updates the igb version to 4.0.1. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-20igb: Update firmware info outputCarolyn Wyborny
Our NVM image creation tools have evolved over the years and there are multiple versions contained in them, depending on the tool used to create them. This patch outputs the NVM versions available in ethtool -i output. rc2: (not sure why others show in log but not in the message) Added additional call to igb_set_fw_version per Community feedback. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-20igb: Streamline RSS queue and queue pairing assignment logic.Matthew Vick
Rather than spread out the complexity of the RSS queue and queue pairing assignment logic, place it all in one location for simplicity and readability. Signed-off-by: Matthew Vick <matthew.vick@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-20igb: Support the get_ts_info ethtool method.Carolyn Wyborny
Based on original patch from Richard Cochran <richardcochran@gmail.com> Original patch caused build errors without CONFIG_IGB_1588_CLOCK and CONFIG_PPS enabled, since the added code was not properly wrapped. CC: Richard Cochran <richardcochran@gmail.com> Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-20igb: Add switch case for supported hardware to igb_ptp_remove.Carolyn Wyborny
PTP initialization is only done on supported parts, so remove needs same checks or it will cause crashes on systems with igb devices that don't support PTP. This patch adds those checks to the exit function. Signed-off-by: Carolyn Wyborny <carolyn.wyborny@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-20igb: A fix to VF TX rate limitLior Levy
There is a need to configure MMW_SIZE in register RTTBCNRM with a correct value. For 82576 device, the value should be 0x14. Signed-off-by: Lior Levy <lior.levy@intel.com> Tested-by: Jeff Pieper <jeffrey.e.pieper@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-20e1000: Combining Bitwise OR in one expression.Tushar Dave
Signed-off-by: Tushar Dave <tushar.n.dave@intel.com> Tested-by: Aaron Brown <aaron.f.brown@intel.com> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
2012-06-19net: qmi_wwan: use module_usb_driver macroBjørn Mork
Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19net: qmi_wwan: shorten driver descriptionBjørn Mork
The description is used in ethtool fixed length fields. Make it shorter to avoid truncation. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19net: qmi_wwan: bind to both control and data interfaceBjørn Mork
Always bind to control interface regardless of whether it is a shared interface or not. A QMI/wwan function is required to provide both a control interface (QMI) and a data interface (wwan). All devices supported by this driver do so. But the vendors may choose to use different USB descriptor layouts, and some vendors even allow the same device to present different layouts. Most of these devices use a USB descriptor layout with a single USB interface for both control and data. But some split control and data into two interfaces, bound together by a CDC Union descriptor on the control interface. Before the cdc-wdm subdriver support was added, this split was used to let cdc-wdm drive the QMI control interface and qmi_wwan drive the wwna data interface. This split driver model has a number of issues: - qmi_wwan must match on the data interface descriptor, which often are indistiguishable from data interfaces belonging to other CDC (like) functions like ACM - supporting a single QMI/wwan function requires adding the device to two drivers - syncronizing the probes among a number of drivers, to ensure selecting the correct driver, is difficult unless all drivers match on the same interface This patch resolves these problems by using the same probing mechanism as cdc-ether for devices with a two- interface USB descriptor layout. This makes the driver behave consistently, supporting both the control and data part of the QMI/wwan function, regardless of the USB descriptors. Cc: Thomas Schäfer <tschaefer@t-online.de> Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19net: qmi_wwan: rearranging to prepare for code sharingBjørn Mork
Most of the subdriver registration code can be reused for devices with separate control and data interfaces. Move the code a bit around to prepare for such reuse. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19net: qmi_wwan: define a structure for driver specific stateBjørn Mork
usbnet allocates a fixed size array for minidriver specific state. Naming the fields and taking advantage of type checking is a bit more failsafe than casting array elements each time they are referenced. Signed-off-by: Bjørn Mork <bjorn@mork.no> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: use rcu_dereference_bh() in tx pathJiri Pirko
Should be used instead of rcu_dereference, since rcu_read_lock_bh is held. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: allow to send multiple set events in one messageJiri Pirko
When multiple sets are done, event message is generated for each. This patch accumulates these messages into one. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: ensure correct order of netlink messages deliveryJiri Pirko
currently, when port is created and per-port options are present, there options are sent to userspace with ifindex of port which userspace does not know about. Port add message goes right after. This patch corrects message ordering so userspace would not be confused. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: implement multipart netlink messages for options transfersJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: lb: introduce infrastructure for userspace driven tx loadbalancingJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: add port_[enabled/disabled] mode callbacksJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: pass NULL to __team_option_inst_add() instead of 0Jiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: allow to specify one option instance to be send to userspaceJiri Pirko
No need to walk through option instance list and look for ->changed == true when called knows exactly what one option instance changed. Also use lists to pass option instances needed to be present in netlink message. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: fix error path in team_nl_fill_port_list_get()Jiri Pirko
genlmsg_cancel() needs to be called in case nest fails Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: fix error path in team_nl_fill_options_get()Jiri Pirko
genlmsg_cancel() needs to be called in case nest fails Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: allow async option changesJiri Pirko
This patch adds two exported functions. One allows to mark option instance as changed and the second processes change check and does transfer of changed options to userspace. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: push array_index and port into separate structureJiri Pirko
Introduce struct team_option_inst_info and push option instance info there. It can be then easily passed to gsetter context and used for feature async option changes. Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: comments: s/net\/drivers\/team/drivers\/net\/team/Jiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: introduce array optionsJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: allow read/write-only optionsJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: lb: push hash counting into separate functionJiri Pirko
Also squash hash into one byte Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: add mode priv to portJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: for nomode use dummy struct team_modeJiri Pirko
That leaves team->mode and all its values valid so no checks would be needed (for example in team_mode_option_get()). Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19team: make team_mode struct constJiri Pirko
Signed-off-by: Jiri Pirko <jpirko@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2012-06-19Merge branch 'master' of git://gitorious.org/linux-can/linux-can-nextDavid S. Miller
Marc Kleine-Budde says: ==================== here is our second pull request for net-next. In this series Federico Vaga adds a pci driver for c_can/d_can hardware using the existing generic c_can driver. The remaining 6 patches are by Oliver Hartkopp. He adds CANFD support to the CAN stack while keeping binary compatibility for existing applications. CANFD is an extension to the existing CAN standard, it allows longer CAN frames and/or higher data rates. There's no real hardware available yet, but this series adds CANFD support to the vcan driver. ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
generated by cgit v0.10.2 at 2024-11-21 07:11:00 (GMT)