summaryrefslogtreecommitdiff
path: root/include/scsi
AgeCommit message (Collapse)Author
2015-02-13Reset to 3.12.37Scott Wood
2014-02-13ore: Fix wrong math in allocation of per device BIOBoaz Harrosh
commit aad560b7f63b495f48a7232fd086c5913a676e6f upstream. At IO preparation we calculate the max pages at each device and allocate a BIO per device of that size. The calculation was wrong on some unaligned corner cases offset/length combination and would make prepare return with -ENOMEM. This would be bad for pnfs-objects that would in that case IO through MDS. And fatal for exofs were it would fail writes with EIO. Fix it by doing the proper math, that will work in all cases. (I ran a test with all possible offset/length combinations this time round). Also when reading we do not need to allocate for the parity units since we jump over them. Also lower the max_io_length to take into account the parity pages so not to allocate BIOs bigger than PAGE_SIZE Signed-off-by: Boaz Harrosh <bharrosh@panasas.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-12-12SCSI: Disable WRITE SAME for RAID and virtual host adapter driversMartin K. Petersen
commit 54b2b50c20a61b51199bedb6e5d2f8ec2568fb43 upstream. Some host adapters do not pass commands through to the target disk directly. Instead they provide an emulated target which may or may not accurately report its capabilities. In some cases the physical device characteristics are reported even when the host adapter is processing commands on the device's behalf. This can lead to adapter firmware hangs or excessive I/O errors. This patch disables WRITE SAME for devices connected to host adapters that provide an emulated target. Driver writers can disable WRITE SAME by setting the no_write_same flag in the host adapter template. [jejb: fix up rejections due to eh_deadline patch] Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-09-12Merge branch 'for-next' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending Pull SCSI target updates from Nicholas Bellinger: "Lots of activity again this round for I/O performance optimizations (per-cpu IDA pre-allocation for vhost + iscsi/target), and the addition of new fabric independent features to target-core (COMPARE_AND_WRITE + EXTENDED_COPY). The main highlights include: - Support for iscsi-target login multiplexing across individual network portals - Generic Per-cpu IDA logic (kent + akpm + clameter) - Conversion of vhost to use per-cpu IDA pre-allocation for descriptors, SGLs and userspace page pointer list - Conversion of iscsi-target + iser-target to use per-cpu IDA pre-allocation for descriptors - Add support for generic COMPARE_AND_WRITE (AtomicTestandSet) emulation for virtual backend drivers - Add support for generic EXTENDED_COPY (CopyOffload) emulation for virtual backend drivers. - Add support for fast memory registration mode to iser-target (Vu) The patches to add COMPARE_AND_WRITE and EXTENDED_COPY support are of particular significance, which make us the first and only open source target to support the full set of VAAI primitives. Currently Linux clients are lacking upstream support to actually utilize these primitives. However, with server side support now in place for folks like MKP + ZAB working on the client, this logic once reserved for the highest end of storage arrays, can now be run in VMs on their laptops" * 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (50 commits) target/iscsi: Bump versions to v4.1.0 target: Update copyright ownership/year information to 2013 iscsi-target: Bump default TCP listen backlog to 256 target: Fix >= v3.9+ regression in PR APTPL + ALUA metadata write-out iscsi-target; Bump default CmdSN Depth to 64 iscsi-target: Remove unnecessary wait_for_completion in iscsi_get_thread_set iscsi-target: Add thread_set->ts_activate_sem + use common deallocate iscsi-target: Fix race with thread_pre_handler flush_signals + ISCSI_THREAD_SET_DIE target: remove unused including <linux/version.h> iser-target: introduce fast memory registration mode (FRWR) iser-target: generalize rdma memory registration and cleanup iser-target: move rdma wr processing to a shared function target: Enable global EXTENDED_COPY setup/release target: Add Third Party Copy (3PC) bit in INQUIRY response target: Enable EXTENDED_COPY setup in spc_parse_cdb target: Add support for EXTENDED_COPY copy offload emulation target: Avoid non-existent tg_pt_gp_mem in target_alua_state_check target: Add global device list for EXTENDED_COPY target: Make helpers non static for EXTENDED_COPY command setup target: Make spc_parse_naa_6h_vendor_specific non static ...
2013-09-09scsi: Add CDB definition for COMPARE_AND_WRITENicholas Bellinger
Reviewed-by: Christoph Hellwig <hch@lst.de> Cc: Hannes Reinecke <hare@suse.de> Cc: Martin Petersen <martin.petersen@oracle.com> Cc: Chris Mason <chris.mason@fusionio.com> Cc: James Bottomley <JBottomley@Parallels.com> Cc: Nicholas Bellinger <nab@linux-iscsi.org> Signed-off-by: Nicholas Bellinger <nab@daterainc.com>
2013-08-26[SCSI] Generate uevents on certain unit attention codesEwan D. Milne
Generate a uevent when the following Unit Attention ASC/ASCQ codes are received: 2A/01 MODE PARAMETERS CHANGED 2A/09 CAPACITY DATA HAS CHANGED 38/07 THIN PROVISIONING SOFT THRESHOLD REACHED 3F/03 INQUIRY DATA HAS CHANGED 3F/0E REPORTED LUNS DATA HAS CHANGED Log kernel messages when the following Unit Attention ASC/ASCQ codes are received that are not as specific as those above: 2A/xx PARAMETERS CHANGED 3F/xx TARGET OPERATING CONDITIONS HAVE CHANGED Added logic to set expecting_lun_change for other LUNs on the target after REPORTED LUNS DATA HAS CHANGED is received, so that duplicate uevents are not generated, and clear expecting_lun_change when a REPORT LUNS command completes, in accordance with the SPC-3 specification regarding reporting of the 3F 0E ASC/ASCQ UA. [jejb: remove SPC3 test in scsi_report_lun_change and some docbook fixes and unused variable fix, both reported by Fengguang Wu] Signed-off-by: Ewan D. Milne <emilne@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] libiscsi: Exporting new attrs for iscsi session and connection in sysfsAdheer Chandravanshi
Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] scsi_transport_iscsi: Exporting new attrs for iscsi session and ↵Adheer Chandravanshi
connection in sysfs Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] Return ENODATA on medium errorHannes Reinecke
When a medium error is detected the SCSI stack should return ENODATA to the upper layers. [jejb: fix whitespace error] Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] return ENOSPC on thin provisioning failureHannes Reinecke
When the thin provisioning hard threshold is reached we should return ENOSPC to inform upper layers about this fact. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-08-23[SCSI] Set hostbyte status in scsi_check_sense()Hannes Reinecke
We should be modifying the host_byte status in scsi_check_sense() directly; this saves us to introduce a special return code for each and every condition. Signed-off-by: Hannes Reinecke <hare@suse.de> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-27[SCSI] libiscsi: Added new boot entries in the session sysfsEddie Wai
This is the kernel part of the modification to extract the net params from the ibft sysfs to the iface struct used for the connection request upon sync_session in the open-iscsi util. Three new session sysfs params are defined: boot_root - holds the name of the /sys/firmware/ibft or iscsi_rootN boot_nic - holds the ethernetN name boot_target - holds the targetN name Signed-off-by: Eddie Wai <eddie.wai@broadcom.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-24[SCSI] Workaround for disks that report bad optimal transfer lengthMartin K. Petersen
Not all disks fill out the VPD pages correctly. Add a blacklist flag that allows us ignore the SBC-3 VPD pages for a given device. The BLIST_SKIP_VPD_PAGES flag triggers our existing skip_vpd_pages scsi_device parameter to bypass VPD scanning. Also blacklist the offending Seagate drive model. Reported-by: Mike Snitzer <snitzer@redhat.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-04[SCSI] Allow error handling timeout to be specifiedMartin K. Petersen
Introduce eh_timeout which can be used for error handling purposes. This was previously hardcoded to 10 seconds in the SCSI error handling code. However, for some fast-fail scenarios it is necessary to be able to tune this as it can take several iterations (bus device, target, bus, controller) before we give up. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-06-04[SCSI] libsas: implement > 16 byte CDB supportJames Bottomley
Remove the arbitrary expectation in libsas that all SCSI commands are 16 bytes or less. Instead do all copies via cmd->cmd_len (and use a pointer to this in the libsas task instead of a copy). Note that this still doesn't enable > 16 byte CDB support in the underlying drivers because their internal format has to be fixed and the wire format of > 16 byte CDBs according to the SAS spec is different. the libsas drivers (isci, aic94xx, mvsas and pm8xxx are all updated for this change. Cc: Lukasz Dorau <lukasz.dorau@intel.com> Cc: Maciej Patelczyk <maciej.patelczyk@intel.com> Cc: Dave Jiang <dave.jiang@intel.com> Cc: Jack Wang <xjtuwjp@gmail.com> Cc: Lindar Liu <lindar_liu@usish.com> Cc: Xiangliang Yu <yuxiangl@marvell.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10Merge branch 'postmerge' into for-linusJames Bottomley
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10Merge branch 'misc' into for-linusJames Bottomley
Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10[SCSI] iscsi class, qla4xxx: fix sess/conn refcounting when find fns are usedMike Christie
This fixes a bug where the iscsi class/driver did not do a put_device when a sess/conn device was found. This also simplifies the interface by not having to pass in some arguments that were duplicated and did not need to be exported. Reported-by: Zhao Hongjiang <zhaohongjiang@huawei.com> Signed-off-by: Mike Christie <michaelc@cs.wisc.edu> Acked-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-10[SCSI] sas: unify the pointlessly separated enums sas_dev_type and ↵James Bottomley
sas_device_type These enums have been separate since the dawn of SAS, mainly because the latter is a procotol only enum and the former includes additional state for libsas. The dichotomy causes endless confusion about which one you should use where and leads to pointless warnings like this: drivers/scsi/mvsas/mv_sas.c: In function 'mvs_update_phyinfo': drivers/scsi/mvsas/mv_sas.c:1162:34: warning: comparison between 'enum sas_device_type' and 'enum sas_dev_type' [-Wenum-compare] Fix by eliminating one of them. The one kept is effectively the sas.h one, but call it sas_device_type and make sure the enums are all properly namespaced with the SAS_ prefix. Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-06[SCSI] sd: use REQ_PM in sd's runtime suspend operationLin Ming
With the introduction of REQ_PM, modify sd's runtime suspend operation functions to use that flag so that the operations to put the device into runtime suspended state(i.e. sync cache and stop device) will not affect its runtime PM status. Signed-off-by: Lin Ming <ming.m.lin@intel.com> Signed-off-by: Aaron Lu <aaron.lu@intel.com> Acked-by: Alan Stern <stern@rowland.harvard.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02[SCSI] libosd: remover duplicate __bitwise annotationDan Carpenter
__be32 is already a __bitwise type so we don't need the second __bitwise here. It causes a Sparse error: include/scsi/osd_protocol.h:110:26: error: invalid modifier Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com> Acked-by: Benny Halevy <bhalevy@tonian.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-05-02Merge branch 'for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs Pull VFS updates from Al Viro, Misc cleanups all over the place, mainly wrt /proc interfaces (switch create_proc_entry to proc_create(), get rid of the deprecated create_proc_read_entry() in favor of using proc_create_data() and seq_file etc). 7kloc removed. * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (204 commits) don't bother with deferred freeing of fdtables proc: Move non-public stuff from linux/proc_fs.h to fs/proc/internal.h proc: Make the PROC_I() and PDE() macros internal to procfs proc: Supply a function to remove a proc entry by PDE take cgroup_open() and cpuset_open() to fs/proc/base.c ppc: Clean up scanlog ppc: Clean up rtas_flash driver somewhat hostap: proc: Use remove_proc_subtree() drm: proc: Use remove_proc_subtree() drm: proc: Use minor->index to label things, not PDE->name drm: Constify drm_proc_list[] zoran: Don't print proc_dir_entry data in debug reiserfs: Don't access the proc_dir_entry in r_open(), r_start() r_show() proc: Supply an accessor for getting the data from a PDE's parent airo: Use remove_proc_subtree() rtl8192u: Don't need to save device proc dir PDE rtl8187se: Use a dir under /proc/net/r8180/ proc: Add proc_mkdir_data() proc: Move some bits from linux/proc_fs.h to linux/{of.h,signal.h,tty.h} proc: Move PDE_NET() to fs/proc/proc_net.c ...
2013-05-01Merge branch 'akpm' (incoming from Andrew)Linus Torvalds
Merge third batch of fixes from Andrew Morton: "Most of the rest. I still have two large patchsets against AIO and IPC, but they're a bit stuck behind other trees and I'm about to vanish for six days. - random fixlets - inotify - more of the MM queue - show_stack() cleanups - DMI update - kthread/workqueue things - compat cleanups - epoll udpates - binfmt updates - nilfs2 - hfs - hfsplus - ptrace - kmod - coredump - kexec - rbtree - pids - pidns - pps - semaphore tweaks - some w1 patches - relay updates - core Kconfig changes - sysrq tweaks" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: (109 commits) Documentation/sysrq: fix inconstistent help message of sysrq key ethernet/emac/sysrq: fix inconstistent help message of sysrq key sparc/sysrq: fix inconstistent help message of sysrq key powerpc/xmon/sysrq: fix inconstistent help message of sysrq key ARM/etm/sysrq: fix inconstistent help message of sysrq key power/sysrq: fix inconstistent help message of sysrq key kgdb/sysrq: fix inconstistent help message of sysrq key lib/decompress.c: fix initconst notifier-error-inject: fix module names in Kconfig kernel/sys.c: make prctl(PR_SET_MM) generally available UAPI: remove empty Kbuild files menuconfig: print more info for symbol without prompts init/Kconfig: re-order CONFIG_EXPERT options to fix menuconfig display kconfig menu: move Virtualization drivers near other virtualization options Kconfig: consolidate CONFIG_DEBUG_STRICT_USER_COPY_CHECKS relay: use macro PAGE_ALIGN instead of FIX_SIZE kernel/relay.c: move FIX_SIZE macro into relay.c kernel/relay.c: remove unused function argument actor drivers/w1/slaves/w1_ds2760.c: fix the error handling in w1_ds2760_add_slave() drivers/w1/slaves/w1_ds2781.c: fix the error handling in w1_ds2781_add_slave() ...
2013-05-01UAPI: remove empty Kbuild filesDavid Howells
Remove empty Kbuild files as they cause problems with the patch program which removes files that become empty. Signed-off-by: David Howells <dhowells@redhat.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2013-04-11[SCSI] scsi_transport_iscsi: Declare portal type string macros for generic useAdheer Chandravanshi
Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Reviewed-by: Mike Christie <michaelc@cs.wisc.edu> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-11[SCSI] libiscsi: export function iscsi_switch_str_paramAdheer Chandravanshi
Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-11[SCSI] scsi_transport_iscsi: Add flash node mgmt supportAdheer Chandravanshi
This patch allows iscsiadm to manage iSCSI target information stored on adapter flash on per host basis. The sysfs entries will look as cited below: /sys/bus/iscsi_flashnode/devices/flashnode_sess-<host_no>:<flashnode_id>/<session attrs> /sys/bus/iscsi_flashnode/devices/flashnode_conn-<host_no>:<flashnode_id>:<conn_id>/<conn attrs> Signed-off-by: Adheer Chandravanshi <adheer.chandravanshi@qlogic.com> Signed-off-by: Manish Rangankar <manish.rangankar@qlogic.com> Signed-off-by: Vikas Chaudhary <vikas.chaudhary@qlogic.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-04-09scsi: bury ->proc_info()Al Viro
all users converted to ->show_info()/->write_info() Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-04-09scsi: saner replacements for ->proc_info()Al Viro
It's still an obsolete interface; don't introduce those in new drivers. However, it's saner than the ->proc_info() and commits after this one will convert the existing ->proc_info() users to it. The read side is ->show_info(seq_file *, struct Scsi_Host *); use seq_... for generating contents. The write side is ->write_info(struct Scsi_Host *, char *, int). Again, this is driven by procfs needs; we are going to kill ->write_proc() and ->read_proc() and this is the main obstacle to burying that piece of shit. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-03-25libfc, fcoe, bnx2fc: Split fc_disc_init into fc_disc_{init, config}Robert Love
Split discovery initialization in code that is setup once (fcoe_disc_init) and code that can be re-configured (fcoe_disc_config). Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
2013-03-25libfc, fcoe, bnx2fc: Always use fcoe_disc_init for discovery layer ↵Robert Love
initialization Currently libfcoe is doing some libfc discovery layer initialization outside of libfc. This patch moves this code into libfc and sets up a split in discovery (one time) initialization code and (re-configurable) settings that will come in the next patch. Signed-off-by: Robert Love <robert.w.love@intel.com> Tested-by: Jack Morgan <jack.morgan@intel.com> Reviewed-by: Bhanu Prakash Gollapudi <bprakash@broadcom.com>
2013-03-02Merge tag 'scsi-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi Pull SCSI updates from James Bottomley: "This is an assorted set of stragglers into the merge window with driver updates for qla2xxx, megaraid_sas, storvsc and ufs. It also includes pulls of the uapi tree (all the remaining SCSI pieces) and the fcoe tree (updates to fcoe and libfc)" * tag 'scsi-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (81 commits) [SCSI] ufs: Separate PCI code into glue driver [SCSI] ufs: Segregate PCI Specific Code [SCSI] scsi: fix lpfc build when wmb() is defined as mb() [SCSI] storvsc: Handle dynamic resizing of the device [SCSI] storvsc: Restructure error handling code on command completion [SCSI] storvsc: avoid usage of WRITE_SAME [SCSI] aacraid: suppress two GCC warnings [SCSI] hpsa: check for dma_mapping_error in hpsa_passthru ioctls [SCSI] hpsa: reorganize error handling in hpsa_passthru_ioctl [SCSI] hpsa: check for dma_mapping_error in hpsa_map_sg_chain_block [SCSI] hpsa: Check for dma_mapping_error for all code paths using fill_cmd [SCSI] hpsa: Check for dma_mapping_error in hpsa_map_one [SCSI] dc395x: uninitialized variable in device_alloc() [SCSI] Fix range check in scsi_host_dif_capable() [SCSI] storvsc: Initialize the sglist [SCSI] mpt2sas: Add support for OEM specific controller [SCSI] ipr: Fix oops while resetting an ipr adapter [SCSI] fnic: Fnic Trace Utility [SCSI] fnic: New debug flags and debug log messages [SCSI] fnic: fnic driver may hit BUG_ON on device reset ...
2013-03-01[SCSI] Merge tag 'fcoe-02-19-13' into for-linusJames Bottomley
FCoE Updates for 3.9 Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-03-01Merge tag 'uapi-20121219' into for-linusJames Bottomley
UAPI Disintegration 2012-12-19 This is the remaining SCSI part of the UAPI Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-02-24[SCSI] Fix range check in scsi_host_dif_capable()Martin K. Petersen
The range checking from fe542396 was bad. We would still end up walking beyond the array as Type 3 is defined to be 4 in the protection bitmask. Instead use ARRAY_SIZE() for the range check. Reported-by: Dan Carpenter <dan.carpenter@oracle.com> Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2013-01-25[SCSI] remove can_power_off flag from scsi_deviceAaron Lu
Commit 166a2967b45ede2e2e56f3ede3cd32053dc17812 "libata: tell scsi layer device supports runtime power off" introduced the can_power_off flag for scsi_device and is used to support ZPODD implementation in SCSI layer. Since ZPODD is now implemented in ATA layer, that flag is no longer needed, so remove it. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-25[libata] scsi: no poll when ODD is powered offAaron Lu
When the ODD is powered off, any action the user did to the ODD that would generate a media event will trigger an ACPI interrupt, so the poll for media event is no longer necessary. And the poll will also cause a runtime status change, which will stop the ODD from staying in powered off state, so the poll should better be stopped. But since we don't have access to the gendisk structure in LLDs, here comes the disk_events_disable_depth for scsi device. This field is a hint set by LLDs to convey information to upper layer drivers. A value of 0 means media poll is necessary for the device, while values above 0 means media poll is not needed and should better be skipped. So we can increase its value when we are to power off the ODD in ATA layer and decrease its value when the ODD is powered on, effectively silence the media events poll. Signed-off-by: Aaron Lu <aaron.lu@intel.com> Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
2013-01-07UAPI: (Scripted) Disintegrate include/scsi/fcDavid Howells
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-12-19UAPI: (Scripted) Disintegrate include/scsiDavid Howells
Signed-off-by: David Howells <dhowells@redhat.com> Acked-by: Arnd Bergmann <arnd@arndb.de> Acked-by: Thomas Gleixner <tglx@linutronix.de> Acked-by: Michael Kerrisk <mtk.manpages@gmail.com> Acked-by: Paul E. McKenney <paulmck@linux.vnet.ibm.com> Acked-by: Dave Jones <davej@redhat.com>
2012-12-14libfcoe, fcoe: consolidate the fcoe_ctlr_get_lesb/fcoe_get_lesbYi Zou
Similarly they can be moved into libfcoe instead of being private to fcoe now. Also add comments particularly on the term LESB to the corresponding function. Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14libfcoe, fcoe: move fcoe_link_speed_update() to libfcoe and export itYi Zou
With the previous patch, fcoe_link_speed_update() can be moved into libfcoe and exported to used by fcoe, bnx2fc, and etc. Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14fcoe: add support to the get_netdev() for fcoe_interfaceYi Zou
Adds support to fcoe_port's newly added get_netdev fucntion pointer. Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14fcoe: prep work to start consolidate the usage of fcoe_netdevYi Zou
Currently, in the default kernel fcoe driver, it is needed to get to the underlying private per fcoe transport's private structure, e.g., fcoe_interface in fcoe.ko, and returns the associated netdev. The similar logic exists in other fcoe drivers, e.g., bnx2fc, so we add a function pointer into the common fcoe_port struct to allow individual fcoe transport implementaion (fcoe and bnx2fc) to get the corresponding netdev associated with a give lport. Then a inline fcoe_get_netdev() is added as part of libfcoe for all underlying fcoe transport drivers to use regardless of its individual fcoe transport driver, and also allows move more common code such as fcoe_link_speed_update or fcoe_ctlr_get_lesb to be in libfcoe, rather than specific to fcoe. This patch is a prep work that adds aforementioned fucntion pointer, and followed by the actual code changes to make use of it. Signed-off-by: Yi Zou <yi.zou@intel.com> Cc: Bhanu Prakash Gollapudi <bprakash@broadcom.com> Tested-by: Marcus Dennis <marcusx.e.dennis@intel.com> Signed-off-by: Robert Love <robert.w.love@intel.com>
2012-12-14libfcoe, fcoe, bnx2fc: Add new fcoe control interfaceRobert Love
This patch does a few things. 1) Makes /sys/bus/fcoe/ctlr_{create,destroy} interfaces. These interfaces take an <ifname> and will either create an FCoE Controller or destroy an FCoE Controller depending on which file is written to. The new FCoE Controller will start in a DISABLED state and will not do discovery or login until it is ENABLED. This pause will allow us to configure the FCoE Controller before enabling it. 2) Makes the 'mode' attribute of a fcoe_ctlr_device writale. This allows the user to configure the mode in which the FCoE Controller will start in when it is ENABLED. Possible modes are 'Fabric', or 'VN2VN'. The default mode for a fcoe_ctlr{,_device} is 'Fabric'. Drivers must implement the set_fcoe_ctlr_mode routine to support this feature. libfcoe offers an exported routine to set a FCoE Controller's mode. The mode can only be changed when the FCoE Controller is DISABLED. This patch also removes the get_fcoe_ctlr_mode pointer in the fcoe_sysfs function template, the code in fcoe_ctlr.c to get the mode and the assignment of the fcoe_sysfs function pointer to the fcoe_ctlr.c implementation (in fcoe and bnx2fc). fcoe_sysfs can return that value for the mode without consulting the LLD. 3) Make a 'enabled' attribute of a fcoe_ctlr_device. On a read, fcoe_sysfs will return the attribute's value. On a write, fcoe_sysfs will call the LLD (if there is a callback) to notifiy that the enalbed state has changed. This patch maintains the old FCoE control interfaces as module parameters, but it adds comments pointing out that the old interfaces are deprecated. Signed-off-by: Robert Love <robert.w.love@intel.com> Acked-by: Neil Horman <nhorman@tuxdriver.com>
2012-12-14Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsiLinus Torvalds
Pull first round of SCSI updates from James Bottomley: "This patch set includes two large new drivers: mpt3sas (for the next gen fusion SAS hardware) and csiostor a FCoE offload driver for the Chelsio converged network cards (this includes some net changes which I've OK'd with DaveM). The rest of the patch is driver updates (qla2xxx, lpfc, hptiop, be2iscsi) plus a few assorted updates and bug fixes. We also have a Power Management rework in the Upper Layer Drivers preparatory to doing ACPI zero power optical devices, but the actual enabler is still being worked on. Signed-off-by: James Bottomley <JBottomley@Parallels.com>" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (72 commits) [SCSI] mpt3sas: add new driver supporting 12GB SAS [SCSI] scsi_transport_sas: add 12GB definitions for mpt3sas [SCSI] miscdevice: Adding support for MPT3SAS_MINOR(222) [SCSI] csiostor: remove unneeded memset() [SCSI] csiostor: Fix sparse warnings. [SCSI] qla2xxx: Display that driver is operating in legacy interrupt mode. [SCSI] qla2xxx: Dont clear drv active on iospace config failure. [SCSI] qla2xxx: Fix typo in qla2xxx driver. [SCSI] qla2xxx: Update ql2xextended_error_logging parameter description with new option. [SCSI] qla2xxx: Parameterize the link speed of hba rather than fcport. [SCSI] qla2xxx: Add 16Gb/s case to get port speed capability. [SCSI] qla2xxx: Move marking fcport online ahead of setting iiDMA speed. [SCSI] qla2xxx: Add acquiring of risc semaphore before doing ISP reset. [SCSI] qla2xxx: Ignore driver ack bit if corresponding presence bit is not set. [SCSI] qla2xxx: Fix typo in qla83xx_fw_dump function. [SCSI] qla2xxx: Add Gen3 PCIe speed 8GT/s to the log message. [SCSI] qla2xxx: Use correct Request-Q-Out register during bidirectional request processing [SCSI] qla2xxx: Move noisy Start scsi failed messages to verbose logging level. [SCSI] qla2xxx: Fix coccinelle warnings in qla2x00_relogin. [SCSI] qla2xxx: No fcport FC-4 type assignment in GA_NXT response. ...
2012-12-14Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband upate from Roland Dreier: "First batch of InfiniBand/RDMA changes for the 3.8 merge window: - A good chunk of Bart Van Assche's SRP fixes - UAPI disintegration from David Howells - mlx4 support for "64-byte CQE" hardware feature from Or Gerlitz - Other miscellaneous fixes" Fix up trivial conflict in mellanox/mlx4 driver. * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: (33 commits) RDMA/nes: Fix for crash when registering zero length MR for CQ RDMA/nes: Fix for terminate timer crash RDMA/nes: Fix for BUG_ON due to adding already-pending timer IB/srp: Allow SRP disconnect through sysfs srp_transport: Document sysfs attributes srp_transport: Simplify attribute initialization code srp_transport: Fix attribute registration IB/srp: Document sysfs attributes IB/srp: send disconnect request without waiting for CM timewait exit IB/srp: destroy and recreate QP and CQs when reconnecting IB/srp: Eliminate state SRP_TARGET_DEAD IB/srp: Introduce the helper function srp_remove_target() IB/srp: Suppress superfluous error messages IB/srp: Process all error completions IB/srp: Introduce srp_handle_qp_err() IB/srp: Simplify SCSI error handling IB/srp: Keep processing commands during host removal IB/srp: Eliminate state SRP_TARGET_CONNECTING IB/srp: Increase block layer timeout RDMA/cm: Change return value from find_gid_port() ...
2012-12-01[SCSI] scsi_transport_sas: add 12GB definitions for mpt3sasSreekanth Reddy
[jejb: split this core change into a separate patch] Signed-off-by: Sreekanth Reddy <Sreekanth.Reddy@lsi.com> Reviewed-by: Nagalakshmi Nandigama <Nagalakshmi.Nandigama@lsi.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-12-01IB/srp: Allow SRP disconnect through sysfsBart Van Assche
Make it possible to disconnect the IB RC connection used by the SRP protocol to communicate with a target. Have the SRP transport layer create a sysfs "delete" attribute for initiator drivers that support this functionality. Signed-off-by: Bart Van Assche <bvanassche@acm.org> Acked-by: David Dillow <dillowda@ornl.gov> Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp> Cc: Robert Jennings <rcj@linux.vnet.ibm.com> Signed-off-by: Roland Dreier <roland@purestorage.com>
2012-11-27[SCSI] sd: Use SCSI read/write(16) with > 32-bit LBA drivesJason J. Herne
Force large capacity (> 0xFFFFFFFF blocks) drives to use READ/WRITE(16) instead of READ/WRITE(10). Some(most/all?) USB enclosures do not like READ(10) commands when a large capacity drive is installed. This issue was reported and discussed here: http://marc.info/?l=linux-usb&m=135247705222324 Signed-off-by: Jason J. Herne <hernejj@gmail.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
2012-11-14[SCSI] sd: Implement support for WRITE SAMEMartin K. Petersen
Implement support for WRITE SAME(10) and WRITE SAME(16) in the SCSI disk driver. - We set the default maximum to 0xFFFF because there are several devices out there that only support two-byte block counts even with WRITE SAME(16). We only enable transfers bigger than 0xFFFF if the device explicitly reports MAXIMUM WRITE SAME LENGTH in the BLOCK LIMITS VPD. - max_write_same_blocks can be overriden per-device basis in sysfs. - The UNMAP discovery heuristics remain unchanged but the discard limits are tweaked to match the "real" WRITE SAME commands. - In the error handling logic we now distinguish between WRITE SAME with and without UNMAP set. The discovery process heuristics are: - If the device reports a SCSI level of SPC-3 or greater we'll issue READ SUPPORTED OPERATION CODES to find out whether WRITE SAME(16) is supported. If that's the case we will use it. - If the device supports the block limits VPD and reports a MAXIMUM WRITE SAME LENGTH bigger than 0xFFFF we will use WRITE SAME(16). - Otherwise we will use WRITE SAME(10) unless the target LBA is beyond 0xFFFFFFFF or the block count exceeds 0xFFFF. - no_write_same is set for ATA, FireWire and USB. Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com> Reviewed-by: Mike Snitzer <snitzer@redhat.com> Reviewed-by: Jeff Garzik <jgarzik@redhat.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>