summaryrefslogtreecommitdiff
path: root/drivers/ata/pata_it8172.c
blob: f8367191fc7b62e09d9f34245a5c61edbffc848f (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
/*
 * pata_it8172.c 	- IT8172 PATA for new ATA layer
 *			  (C) 2005 Red Hat Inc
 *			  Alan Cox <alan@redhat.com>
 *
 * Based heavily on
 *
 * BRIEF MODULE DESCRIPTION
 *      IT8172 IDE controller support
 *
 * Copyright 2000 MontaVista Software Inc.
 * Author: MontaVista Software, Inc.
 *              stevel@mvista.com or source@mvista.com
 *
 *  This program is free software; you can redistribute  it and/or modify it
 *  under  the terms of  the GNU General  Public License as published by the
 *  Free Software Foundation;  either version 2 of the  License, or (at your
 *  option) any later version.
 *
 *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
 *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
 *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
 *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
 *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
 *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
 *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 *  You should have received a copy of the  GNU General Public License along
 *  with this program; if not, write  to the Free Software Foundation, Inc.,
 *  675 Mass Ave, Cambridge, MA 02139, USA.
 *
 *	TODO
 *	Check for errata
 *	See if we really need to force native mode
 *	PIO timings (also lacking in original)
 */

#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <linux/blkdev.h>
#include <linux/delay.h>
#include <scsi/scsi_host.h>
#include <linux/libata.h>

#define DRV_NAME "pata_it8172"
#define DRV_VERSION "0.3.1"

static int it8172_pre_reset(struct ata_port *ap)
{
	static const struct pci_bits it8172_enable_bits[] = {
		{ 0x00, 0, 0x00, 0x00 },
		{ 0x40, 1, 0x00, 0x01 }
	};

	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	
	if (ap->port_no && !pci_test_config_bits(pdev, &it8172_enable_bits[ap->port_no])) {
		ata_port_disable(ap);
		printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
		return 0;
	}
	ap->cbl = ATA_CBL_PATA40;
	return ata_std_prereset(ap);
}

static void it8172_error_handler(struct ata_port *ap)
{
	ata_bmdma_drive_eh(ap, it8172_pre_reset, ata_std_softreset, NULL, ata_std_postreset);
}

/**
 *	it8172_set_pio_timing	-	set initial PIO mode data
 *	@ap: ATA interface
 *	@adev: ATA device
 *
 *	Called by both the pio and dma setup functions to set the controller
 *	timings for PIO transfers. We must load both the mode number and
 *	timing values into the controller.
 */

static void it8172_set_pio_timing(struct ata_port *ap, struct ata_device *adev, int pio)
{
	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	u16 reg40;

	pci_read_config_word(pdev, 0x40, &reg40);

	/*
	 * FIX! The DIOR/DIOW pulse width and recovery times in port 0x44
	 * are being left at the default values of 8 PCI clocks (242 nsec
	 * for a 33 MHz clock). These can be safely shortened at higher
	 * PIO modes. The DIOR/DIOW pulse width and recovery times only
	 * apply to PIO modes, not to the DMA modes.
	 */

	/*
	 * Enable port 0x44. The IT8172G spec is confused; it calls
	 * this register the "Slave IDE Timing Register", but in fact,
	 * it controls timing for both master and slave drives.
	 */

	reg40 |= 0x4000;
	if (adev->devno) {
		reg40 &= 0xC006;
		if (pio > 1)
			/* Enable prefetch and IORDY sample-point */
			reg40 |= 0x0060;
	} else {
		reg40 &= 0xC060;
		if (pio > 1)
			/* Enable prefetch and IORDY sample-point */
			reg40 |= 0x0006;
	}
	/* Write back the enables */
	pci_write_config_word(pdev, 0x40, reg40);
}

/**
 *	it8172_set_piomode	-	set initial PIO mode data
 *	@ap: ATA interface
 *	@adev: ATA device
 *
 *	Called to do the PIO mode setup. We use a shared helper for this
 *	as the DMA setup must also adjust the PIO timing information.
 */

static void it8172_set_piomode(struct ata_port *ap, struct ata_device *adev)
{
	it8172_set_pio_timing(ap, adev, adev->pio_mode - XFER_PIO_0);
}

/**
 *	it8172_set_dmamode	-	set initial DMA mode data
 *	@ap: ATA interface
 *	@adev: ATA device
 *
 *	Called to do the DMA mode setup. We must tune an appropriate PIO
 *	mode to match.
 */

static void it8172_set_dmamode(struct ata_port *ap, struct ata_device *adev)
{
	struct pci_dev *pdev = to_pci_dev(ap->host->dev);
	int dn = (2 * ap->port_no) + adev->devno;
	u8 reg48, reg4a;
	int pio;

	static const int pio_map[] = { 1, 3, 4};
	/*
	 * Setting the DMA cycle time to 2 or 3 PCI clocks (60 and 91 nsec
	 * at 33 MHz PCI clock) seems to cause BadCRC errors during DMA
	 * transfers on some drives, even though both numbers meet the minimum
	 * ATAPI-4 spec of 73 and 54 nsec for UDMA 1 and 2 respectively.
	 * So the faster times are just commented out here. The good news is
	 * that the slower cycle time has very little affect on transfer
	 * performance.
	 */

	pci_read_config_byte(pdev, 0x48, &reg48);
	pci_read_config_byte(pdev, 0x4A, &reg4a);

 	reg4a &= ~(3 << (4 * dn));

	if (adev->dma_mode >= XFER_UDMA_0) {
		reg48 |= 1 << dn;
#ifdef UDMA_TIMING_SET
		reg4a |= ((adev->dma_mode - XFER_UDMA_0) << (4 * dn));
#endif
	 	pio = 4;
	} else  {
		pio = pio_map[adev->dma_mode - XFER_MW_DMA_0];
		reg48 &= ~ (1 << dn);
	}
	pci_write_config_byte(pdev, 0x48, reg48);
	pci_write_config_byte(pdev, 0x4A, reg4a);
 	it8172_set_pio_timing(ap, adev, pio);

}

static struct scsi_host_template it8172_sht = {
	.module			= THIS_MODULE,
	.name			= DRV_NAME,
	.ioctl			= ata_scsi_ioctl,
	.queuecommand		= ata_scsi_queuecmd,
	.can_queue		= ATA_DEF_QUEUE,
	.this_id		= ATA_SHT_THIS_ID,
	.sg_tablesize		= LIBATA_MAX_PRD,
	.max_sectors		= ATA_MAX_SECTORS,
	.cmd_per_lun		= ATA_SHT_CMD_PER_LUN,
	.emulated		= ATA_SHT_EMULATED,
	.use_clustering		= ATA_SHT_USE_CLUSTERING,
	.proc_name		= DRV_NAME,
	.dma_boundary		= ATA_DMA_BOUNDARY,
	.slave_configure	= ata_scsi_slave_config,
	.bios_param		= ata_std_bios_param,
};

static struct ata_port_operations it8172_port_ops = {
	.port_disable	= ata_port_disable,
	.set_piomode	= it8172_set_piomode,
	.set_dmamode	= it8172_set_dmamode,
	.mode_filter	= ata_pci_default_filter,

	.tf_load	= ata_tf_load,
	.tf_read	= ata_tf_read,
	.check_status 	= ata_check_status,
	.exec_command	= ata_exec_command,
	.dev_select 	= ata_std_dev_select,

	.freeze		= ata_bmdma_freeze,
	.thaw		= ata_bmdma_thaw,
	.error_handler	= it8172_error_handler,
	.post_internal_cmd = ata_bmdma_post_internal_cmd,

	.bmdma_setup 	= ata_bmdma_setup,
	.bmdma_start 	= ata_bmdma_start,
	.bmdma_stop	= ata_bmdma_stop,
	.bmdma_status 	= ata_bmdma_status,

	.qc_prep 	= ata_qc_prep,
	.qc_issue	= ata_qc_issue_prot,
	.eng_timeout	= ata_eng_timeout,
	.data_xfer	= ata_pio_data_xfer,

	.irq_handler	= ata_interrupt,
	.irq_clear	= ata_bmdma_irq_clear,

	.port_start	= ata_port_start,
	.port_stop	= ata_port_stop,
	.host_stop	= ata_host_stop
};

static int it8172_init_one(struct pci_dev *dev, const struct pci_device_id *id)
{
	static struct ata_port_info info = {
		.sht = &it8172_sht,
		.flags = ATA_FLAG_SLAVE_POSS | ATA_FLAG_SRST,
		.pio_mask = 0x1f,
		.mwdma_mask = 0x06,	/* No MWDMA0 support */
		.udma_mask = 0x7,
		.port_ops = &it8172_port_ops
	};
	static struct ata_port_info *port_info[2] = { &info, &info };

        if ((!(PCI_FUNC(dev->devfn) & 1) ||
            (!((dev->class >> 8) == PCI_CLASS_STORAGE_IDE))))
		return -ENODEV; /* IT8172 is more than an IDE controller */

	return ata_pci_init_one(dev, port_info, 2);
}

static struct pci_device_id it8172[] = {
	{ PCI_DEVICE(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_IT8172G), },
	{ 0, },
};

static struct pci_driver it8172_pci_driver = {
	.name 		= DRV_NAME,
	.id_table	= it8172,
	.probe 		= it8172_init_one,
	.remove		= ata_pci_remove_one
};

static int __init it8172_init(void)
{
	return pci_register_driver(&it8172_pci_driver);
}


static void __exit it8172_exit(void)
{
	pci_unregister_driver(&it8172_pci_driver);
}


MODULE_AUTHOR("Alan Cox");
MODULE_DESCRIPTION("low-level driver for ITE IT8172");
MODULE_LICENSE("GPL");
MODULE_DEVICE_TABLE(pci, it8172);
MODULE_VERSION(DRV_VERSION);

module_init(it8172_init);
module_exit(it8172_exit);