summaryrefslogtreecommitdiff
path: root/drivers/mtd/devices/spear_smi.c
blob: 2238ab916a065e4bac259228ca2e0483988ec79b (plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
/*
 * SMI (Serial Memory Controller) device driver for Serial NOR Flash on
 * SPEAr platform
 * The serial nor interface is largely based on drivers/mtd/m25p80.c,
 * however the SPI interface has been replaced by SMI.
 *
 * Copyright © 2010 STMicroelectronics.
 * Ashish Priyadarshi
 * Shiraz Hashim <shiraz.hashim@st.com>
 *
 * This file is licensed under the terms of the GNU General Public
 * License version 2. This program is licensed "as is" without any
 * warranty of any kind, whether express or implied.
 */

#include <linux/clk.h>
#include <linux/delay.h>
#include <linux/device.h>
#include <linux/err.h>
#include <linux/errno.h>
#include <linux/interrupt.h>
#include <linux/io.h>
#include <linux/ioport.h>
#include <linux/jiffies.h>
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/param.h>
#include <linux/platform_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/spear_smi.h>
#include <linux/mutex.h>
#include <linux/sched.h>
#include <linux/slab.h>
#include <linux/wait.h>

/* max possible slots for serial-nor flash chip in the SMI controller */
#define MAX_NUM_FLASH_CHIP	4

/* SMI clock rate */
#define SMI_MAX_CLOCK_FREQ	50000000 /* 50 MHz */

/* MAX time out to safely come out of a erase or write busy conditions */
#define SMI_PROBE_TIMEOUT	(HZ / 10)
#define SMI_MAX_TIME_OUT	(3 * HZ)

/* timeout for command completion */
#define SMI_CMD_TIMEOUT		(HZ / 10)

/* registers of smi */
#define SMI_CR1		0x0	/* SMI control register 1 */
#define SMI_CR2		0x4	/* SMI control register 2 */
#define SMI_SR		0x8	/* SMI status register */
#define SMI_TR		0xC	/* SMI transmit register */
#define SMI_RR		0x10	/* SMI receive register */

/* defines for control_reg 1 */
#define BANK_EN		(0xF << 0)	/* enables all banks */
#define DSEL_TIME	(0x6 << 4)	/* Deselect time 6 + 1 SMI_CK periods */
#define SW_MODE		(0x1 << 28)	/* enables SW Mode */
#define WB_MODE		(0x1 << 29)	/* Write Burst Mode */
#define FAST_MODE	(0x1 << 15)	/* Fast Mode */
#define HOLD1		(0x1 << 16)	/* Clock Hold period selection */

/* defines for control_reg 2 */
#define SEND		(0x1 << 7)	/* Send data */
#define TFIE		(0x1 << 8)	/* Transmission Flag Interrupt Enable */
#define WCIE		(0x1 << 9)	/* Write Complete Interrupt Enable */
#define RD_STATUS_REG	(0x1 << 10)	/* reads status reg */
#define WE		(0x1 << 11)	/* Write Enable */

#define TX_LEN_SHIFT	0
#define RX_LEN_SHIFT	4
#define BANK_SHIFT	12

/* defines for status register */
#define SR_WIP		0x1	/* Write in progress */
#define SR_WEL		0x2	/* Write enable latch */
#define SR_BP0		0x4	/* Block protect 0 */
#define SR_BP1		0x8	/* Block protect 1 */
#define SR_BP2		0x10	/* Block protect 2 */
#define SR_SRWD		0x80	/* SR write protect */
#define TFF		0x100	/* Transfer Finished Flag */
#define WCF		0x200	/* Transfer Finished Flag */
#define ERF1		0x400	/* Forbidden Write Request */
#define ERF2		0x800	/* Forbidden Access */

#define WM_SHIFT	12

/* flash opcodes */
#define OPCODE_RDID	0x9f	/* Read JEDEC ID */

/* Flash Device Ids maintenance section */

/* data structure to maintain flash ids from different vendors */
struct flash_device {
	char *name;
	u8 erase_cmd;
	u32 device_id;
	u32 pagesize;
	unsigned long sectorsize;
	unsigned long size_in_bytes;
};

#define FLASH_ID(n, es, id, psize, ssize, size)	\
{				\
	.name = n,		\
	.erase_cmd = es,	\
	.device_id = id,	\
	.pagesize = psize,	\
	.sectorsize = ssize,	\
	.size_in_bytes = size	\
}

static struct flash_device flash_devices[] = {
	FLASH_ID("st m25p16"     , 0xd8, 0x00152020, 0x100, 0x10000, 0x200000),
	FLASH_ID("st m25p32"     , 0xd8, 0x00162020, 0x100, 0x10000, 0x400000),
	FLASH_ID("st m25p64"     , 0xd8, 0x00172020, 0x100, 0x10000, 0x800000),
	FLASH_ID("st m25p128"    , 0xd8, 0x00182020, 0x100, 0x40000, 0x1000000),
	FLASH_ID("st m25p05"     , 0xd8, 0x00102020, 0x80 , 0x8000 , 0x10000),
	FLASH_ID("st m25p10"     , 0xd8, 0x00112020, 0x80 , 0x8000 , 0x20000),
	FLASH_ID("st m25p20"     , 0xd8, 0x00122020, 0x100, 0x10000, 0x40000),
	FLASH_ID("st m25p40"     , 0xd8, 0x00132020, 0x100, 0x10000, 0x80000),
	FLASH_ID("st m25p80"     , 0xd8, 0x00142020, 0x100, 0x10000, 0x100000),
	FLASH_ID("st m45pe10"    , 0xd8, 0x00114020, 0x100, 0x10000, 0x20000),
	FLASH_ID("st m45pe20"    , 0xd8, 0x00124020, 0x100, 0x10000, 0x40000),
	FLASH_ID("st m45pe40"    , 0xd8, 0x00134020, 0x100, 0x10000, 0x80000),
	FLASH_ID("st m45pe80"    , 0xd8, 0x00144020, 0x100, 0x10000, 0x100000),
	FLASH_ID("sp s25fl004"   , 0xd8, 0x00120201, 0x100, 0x10000, 0x80000),
	FLASH_ID("sp s25fl008"   , 0xd8, 0x00130201, 0x100, 0x10000, 0x100000),
	FLASH_ID("sp s25fl016"   , 0xd8, 0x00140201, 0x100, 0x10000, 0x200000),
	FLASH_ID("sp s25fl032"   , 0xd8, 0x00150201, 0x100, 0x10000, 0x400000),
	FLASH_ID("sp s25fl064"   , 0xd8, 0x00160201, 0x100, 0x10000, 0x800000),
	FLASH_ID("atmel 25f512"  , 0x52, 0x0065001F, 0x80 , 0x8000 , 0x10000),
	FLASH_ID("atmel 25f1024" , 0x52, 0x0060001F, 0x100, 0x8000 , 0x20000),
	FLASH_ID("atmel 25f2048" , 0x52, 0x0063001F, 0x100, 0x10000, 0x40000),
	FLASH_ID("atmel 25f4096" , 0x52, 0x0064001F, 0x100, 0x10000, 0x80000),
	FLASH_ID("atmel 25fs040" , 0xd7, 0x0004661F, 0x100, 0x10000, 0x80000),
	FLASH_ID("mac 25l512"    , 0xd8, 0x001020C2, 0x010, 0x10000, 0x10000),
	FLASH_ID("mac 25l1005"   , 0xd8, 0x001120C2, 0x010, 0x10000, 0x20000),
	FLASH_ID("mac 25l2005"   , 0xd8, 0x001220C2, 0x010, 0x10000, 0x40000),
	FLASH_ID("mac 25l4005"   , 0xd8, 0x001320C2, 0x010, 0x10000, 0x80000),
	FLASH_ID("mac 25l4005a"  , 0xd8, 0x001320C2, 0x010, 0x10000, 0x80000),
	FLASH_ID("mac 25l8005"   , 0xd8, 0x001420C2, 0x010, 0x10000, 0x100000),
	FLASH_ID("mac 25l1605"   , 0xd8, 0x001520C2, 0x100, 0x10000, 0x200000),
	FLASH_ID("mac 25l1605a"  , 0xd8, 0x001520C2, 0x010, 0x10000, 0x200000),
	FLASH_ID("mac 25l3205"   , 0xd8, 0x001620C2, 0x100, 0x10000, 0x400000),
	FLASH_ID("mac 25l3205a"  , 0xd8, 0x001620C2, 0x100, 0x10000, 0x400000),
	FLASH_ID("mac 25l6405"   , 0xd8, 0x001720C2, 0x100, 0x10000, 0x800000),
};

/* These partitions would be used if platform doesn't pass one */
static struct mtd_partition part_info_8M[] = {
	DEFINE_PARTS("Xloader", 0x00, 0x10000),
	DEFINE_PARTS("UBoot", MTDPART_OFS_APPEND, 0x40000),
	DEFINE_PARTS("Kernel", MTDPART_OFS_APPEND, 0x2C0000),
	DEFINE_PARTS("Root File System", MTDPART_OFS_APPEND, MTDPART_SIZ_FULL),
};

static struct mtd_partition part_info_16M[] = {
	DEFINE_PARTS("Xloader", 0x00, 0x40000),
	DEFINE_PARTS("UBoot", MTDPART_OFS_APPEND, 0x100000),
	DEFINE_PARTS("Kernel", MTDPART_OFS_APPEND, 0x300000),
	DEFINE_PARTS("Root File System", MTDPART_OFS_APPEND, MTDPART_SIZ_FULL),
};

/* Define spear specific structures */

struct spear_snor_flash;

/**
 * struct spear_smi - Structure for SMI Device
 *
 * @clk: functional clock
 * @status: current status register of SMI.
 * @clk_rate: functional clock rate of SMI (default: SMI_MAX_CLOCK_FREQ)
 * @lock: lock to prevent parallel access of SMI.
 * @io_base: base address for registers of SMI.
 * @pdev: platform device
 * @cmd_complete: queue to wait for command completion of NOR-flash.
 * @num_flashes: number of flashes actually present on board.
 * @flash: separate structure for each Serial NOR-flash attached to SMI.
 */
struct spear_smi {
	struct clk *clk;
	u32 status;
	unsigned long clk_rate;
	struct mutex lock;
	void __iomem *io_base;
	struct platform_device *pdev;
	wait_queue_head_t cmd_complete;
	u32 num_flashes;
	struct spear_snor_flash *flash[MAX_NUM_FLASH_CHIP];
};

/**
 * struct spear_snor_flash - Structure for Serial NOR Flash
 *
 * @bank: Bank number(0, 1, 2, 3) for each NOR-flash.
 * @dev_id: Device ID of NOR-flash.
 * @lock: lock to manage flash read, write and erase operations
 * @mtd: MTD info for each NOR-flash.
 * @num_parts: Total number of partition in each bank of NOR-flash.
 * @parts: Partition info for each bank of NOR-flash.
 * @page_size: Page size of NOR-flash.
 * @base_addr: Base address of NOR-flash.
 * @erase_cmd: erase command may vary on different flash types
 * @fast_mode: flash supports read in fast mode
 */
struct spear_snor_flash {
	u32 bank;
	u32 dev_id;
	struct mutex lock;
	struct mtd_info mtd;
	u32 num_parts;
	struct mtd_partition *parts;
	u32 page_size;
	void __iomem *base_addr;
	u8 erase_cmd;
	u8 fast_mode;
};

static inline struct spear_snor_flash *get_flash_data(struct mtd_info *mtd)
{
	return container_of(mtd, struct spear_snor_flash, mtd);
}

/**
 * spear_smi_read_sr - Read status register of flash through SMI
 * @dev: structure of SMI information.
 * @bank: bank to which flash is connected
 *
 * This routine will return the status register of the flash chip present at the
 * given bank.
 */
static int spear_smi_read_sr(struct spear_smi *dev, u32 bank)
{
	int ret;
	u32 ctrlreg1;

	mutex_lock(&dev->lock);
	dev->status = 0; /* Will be set in interrupt handler */

	ctrlreg1 = readl(dev->io_base + SMI_CR1);
	/* program smi in hw mode */
	writel(ctrlreg1 & ~(SW_MODE | WB_MODE), dev->io_base + SMI_CR1);

	/* performing a rsr instruction in hw mode */
	writel((bank << BANK_SHIFT) | RD_STATUS_REG | TFIE,
			dev->io_base + SMI_CR2);

	/* wait for tff */
	ret = wait_event_interruptible_timeout(dev->cmd_complete,
			dev->status & TFF, SMI_CMD_TIMEOUT);

	/* copy dev->status (lower 16 bits) in order to release lock */
	if (ret > 0)
		ret = dev->status & 0xffff;
	else
		ret = -EIO;

	/* restore the ctrl regs state */
	writel(ctrlreg1, dev->io_base + SMI_CR1);
	writel(0, dev->io_base + SMI_CR2);
	mutex_unlock(&dev->lock);

	return ret;
}

/**
 * spear_smi_wait_till_ready - wait till flash is ready
 * @dev: structure of SMI information.
 * @bank: flash corresponding to this bank
 * @timeout: timeout for busy wait condition
 *
 * This routine checks for WIP (write in progress) bit in Status register
 * If successful the routine returns 0 else -EBUSY
 */
static int spear_smi_wait_till_ready(struct spear_smi *dev, u32 bank,
		unsigned long timeout)
{
	unsigned long finish;
	int status;

	finish = jiffies + timeout;
	do {
		status = spear_smi_read_sr(dev, bank);
		if (status < 0)
			continue; /* try till timeout */
		else if (!(status & SR_WIP))
			return 0;

		cond_resched();
	} while (!time_after_eq(jiffies, finish));

	dev_err(&dev->pdev->dev, "smi controller is busy, timeout\n");
	return status;
}

/**
 * spear_smi_int_handler - SMI Interrupt Handler.
 * @irq: irq number
 * @dev_id: structure of SMI device, embedded in dev_id.
 *
 * The handler clears all interrupt conditions and records the status in
 * dev->status which is used by the driver later.
 */
static irqreturn_t spear_smi_int_handler(int irq, void *dev_id)
{
	u32 status = 0;
	struct spear_smi *dev = dev_id;

	status = readl(dev->io_base + SMI_SR);

	if (unlikely(!status))
		return IRQ_NONE;

	/* clear all interrupt conditions */
	writel(0, dev->io_base + SMI_SR);

	/* copy the status register in dev->status */
	dev->status |= status;

	/* send the completion */
	wake_up_interruptible(&dev->cmd_complete);

	return IRQ_HANDLED;
}

/**
 * spear_smi_hw_init - initializes the smi controller.
 * @dev: structure of smi device
 *
 * this routine initializes the smi controller wit the default values
 */
static void spear_smi_hw_init(struct spear_smi *dev)
{
	unsigned long rate = 0;
	u32 prescale = 0;
	u32 val;

	rate = clk_get_rate(dev->clk);

	/* functional clock of smi */
	prescale = DIV_ROUND_UP(rate, dev->clk_rate);

	/*
	 * setting the standard values, fast mode, prescaler for
	 * SMI_MAX_CLOCK_FREQ (50MHz) operation and bank enable
	 */
	val = HOLD1 | BANK_EN | DSEL_TIME | (prescale << 8);

	mutex_lock(&dev->lock);
	writel(val, dev->io_base + SMI_CR1);
	mutex_unlock(&dev->lock);
}

/**
 * get_flash_index - match chip id from a flash list.
 * @flash_id: a valid nor flash chip id obtained from board.
 *
 * try to validate the chip id by matching from a list, if not found then simply
 * returns negative. In case of success returns index in to the flash devices
 * array.
 */
static int get_flash_index(u32 flash_id)
{
	int index;

	/* Matches chip-id to entire list of 'serial-nor flash' ids */
	for (index = 0; index < ARRAY_SIZE(flash_devices); index++) {
		if (flash_devices[index].device_id == flash_id)
			return index;
	}

	/* Memory chip is not listed and not supported */
	return -ENODEV;
}

/**
 * spear_smi_write_enable - Enable the flash to do write operation
 * @dev: structure of SMI device
 * @bank: enable write for flash connected to this bank
 *
 * Set write enable latch with Write Enable command.
 * Returns 0 on success.
 */
static int spear_smi_write_enable(struct spear_smi *dev, u32 bank)
{
	int ret;
	u32 ctrlreg1;

	mutex_lock(&dev->lock);
	dev->status = 0; /* Will be set in interrupt handler */

	ctrlreg1 = readl(dev->io_base + SMI_CR1);
	/* program smi in h/w mode */
	writel(ctrlreg1 & ~SW_MODE, dev->io_base + SMI_CR1);

	/* give the flash, write enable command */
	writel((bank << BANK_SHIFT) | WE | TFIE, dev->io_base + SMI_CR2);

	ret = wait_event_interruptible_timeout(dev->cmd_complete,
			dev->status & TFF, SMI_CMD_TIMEOUT);

	/* restore the ctrl regs state */
	writel(ctrlreg1, dev->io_base + SMI_CR1);
	writel(0, dev->io_base + SMI_CR2);

	if (ret <= 0) {
		ret = -EIO;
		dev_err(&dev->pdev->dev,
			"smi controller failed on write enable\n");
	} else {
		/* check whether write mode status is set for required bank */
		if (dev->status & (1 << (bank + WM_SHIFT)))
			ret = 0;
		else {
			dev_err(&dev->pdev->dev, "couldn't enable write\n");
			ret = -EIO;
		}
	}

	mutex_unlock(&dev->lock);
	return ret;
}

static inline u32
get_sector_erase_cmd(struct spear_snor_flash *flash, u32 offset)
{
	u32 cmd;
	u8 *x = (u8 *)&cmd;

	x[0] = flash->erase_cmd;
	x[1] = offset >> 16;
	x[2] = offset >> 8;
	x[3] = offset;

	return cmd;
}

/**
 * spear_smi_erase_sector - erase one sector of flash
 * @dev: structure of SMI information
 * @command: erase command to be send
 * @bank: bank to which this command needs to be send
 * @bytes: size of command
 *
 * Erase one sector of flash memory at offset ``offset'' which is any
 * address within the sector which should be erased.
 * Returns 0 if successful, non-zero otherwise.
 */
static int spear_smi_erase_sector(struct spear_smi *dev,
		u32 bank, u32 command, u32 bytes)
{
	u32 ctrlreg1 = 0;
	int ret;

	ret = spear_smi_wait_till_ready(dev, bank, SMI_MAX_TIME_OUT);
	if (ret)
		return ret;

	ret = spear_smi_write_enable(dev, bank);
	if (ret)
		return ret;

	mutex_lock(&dev->lock);

	ctrlreg1 = readl(dev->io_base + SMI_CR1);
	writel((ctrlreg1 | SW_MODE) & ~WB_MODE, dev->io_base + SMI_CR1);

	/* send command in sw mode */
	writel(command, dev->io_base + SMI_TR);

	writel((bank << BANK_SHIFT) | SEND | TFIE | (bytes << TX_LEN_SHIFT),
			dev->io_base + SMI_CR2);

	ret = wait_event_interruptible_timeout(dev->cmd_complete,
			dev->status & TFF, SMI_CMD_TIMEOUT);

	if (ret <= 0) {
		ret = -EIO;
		dev_err(&dev->pdev->dev, "sector erase failed\n");
	} else
		ret = 0; /* success */

	/* restore ctrl regs */
	writel(ctrlreg1, dev->io_base + SMI_CR1);
	writel(0, dev->io_base + SMI_CR2);

	mutex_unlock(&dev->lock);
	return ret;
}

/**
 * spear_mtd_erase - perform flash erase operation as requested by user
 * @mtd: Provides the memory characteristics
 * @e_info: Provides the erase information
 *
 * Erase an address range on the flash chip. The address range may extend
 * one or more erase sectors. Return an error is there is a problem erasing.
 */
static int spear_mtd_erase(struct mtd_info *mtd, struct erase_info *e_info)
{
	struct spear_snor_flash *flash = get_flash_data(mtd);
	struct spear_smi *dev = mtd->priv;
	u32 addr, command, bank;
	int len, ret;

	if (!flash || !dev)
		return -ENODEV;

	bank = flash->bank;
	if (bank > dev->num_flashes - 1) {
		dev_err(&dev->pdev->dev, "Invalid Bank Num");
		return -EINVAL;
	}

	addr = e_info->addr;
	len = e_info->len;

	mutex_lock(&flash->lock);

	/* now erase sectors in loop */
	while (len) {
		command = get_sector_erase_cmd(flash, addr);
		/* preparing the command for flash */
		ret = spear_smi_erase_sector(dev, bank, command, 4);
		if (ret) {
			e_info->state = MTD_ERASE_FAILED;
			mutex_unlock(&flash->lock);
			return ret;
		}
		addr += mtd->erasesize;
		len -= mtd->erasesize;
	}

	mutex_unlock(&flash->lock);
	e_info->state = MTD_ERASE_DONE;
	mtd_erase_callback(e_info);

	return 0;
}

/**
 * spear_mtd_read - performs flash read operation as requested by the user
 * @mtd: MTD information of the memory bank
 * @from: Address from which to start read
 * @len: Number of bytes to be read
 * @retlen: Fills the Number of bytes actually read
 * @buf: Fills this after reading
 *
 * Read an address range from the flash chip. The address range
 * may be any size provided it is within the physical boundaries.
 * Returns 0 on success, non zero otherwise
 */
static int spear_mtd_read(struct mtd_info *mtd, loff_t from, size_t len,
		size_t *retlen, u8 *buf)
{
	struct spear_snor_flash *flash = get_flash_data(mtd);
	struct spear_smi *dev = mtd->priv;
	void *src;
	u32 ctrlreg1, val;
	int ret;

	if (!len)
		return 0;

	if (!flash || !dev)
		return -ENODEV;

	if (flash->bank > dev->num_flashes - 1) {
		dev_err(&dev->pdev->dev, "Invalid Bank Num");
		return -EINVAL;
	}

	if (!retlen)
		return -EINVAL;
	else
		*retlen = 0;

	/* select address as per bank number */
	src = flash->base_addr + from;

	mutex_lock(&flash->lock);

	/* wait till previous write/erase is done. */
	ret = spear_smi_wait_till_ready(dev, flash->bank, SMI_MAX_TIME_OUT);
	if (ret) {
		mutex_unlock(&flash->lock);
		return ret;
	}

	mutex_lock(&dev->lock);
	/* put smi in hw mode not wbt mode */
	ctrlreg1 = val = readl(dev->io_base + SMI_CR1);
	val &= ~(SW_MODE | WB_MODE);
	if (flash->fast_mode)
		val |= FAST_MODE;

	writel(val, dev->io_base + SMI_CR1);

	memcpy_fromio(buf, (u8 *)src, len);

	/* restore ctrl reg1 */
	writel(ctrlreg1, dev->io_base + SMI_CR1);
	mutex_unlock(&dev->lock);

	*retlen = len;
	mutex_unlock(&flash->lock);

	return 0;
}

static inline int spear_smi_cpy_toio(struct spear_smi *dev, u32 bank,
		void *dest, const void *src, size_t len)
{
	int ret;
	u32 ctrlreg1;

	/* wait until finished previous write command. */
	ret = spear_smi_wait_till_ready(dev, bank, SMI_MAX_TIME_OUT);
	if (ret)
		return ret;

	/* put smi in write enable */
	ret = spear_smi_write_enable(dev, bank);
	if (ret)
		return ret;

	/* put smi in hw, write burst mode */
	mutex_lock(&dev->lock);

	ctrlreg1 = readl(dev->io_base + SMI_CR1);
	writel((ctrlreg1 | WB_MODE) & ~SW_MODE, dev->io_base + SMI_CR1);

	memcpy_toio(dest, src, len);

	writel(ctrlreg1, dev->io_base + SMI_CR1);

	mutex_unlock(&dev->lock);
	return 0;
}

/**
 * spear_mtd_write - performs write operation as requested by the user.
 * @mtd: MTD information of the memory bank.
 * @to:	Address to write.
 * @len: Number of bytes to be written.
 * @retlen: Number of bytes actually wrote.
 * @buf: Buffer from which the data to be taken.
 *
 * Write an address range to the flash chip. Data must be written in
 * flash_page_size chunks. The address range may be any size provided
 * it is within the physical boundaries.
 * Returns 0 on success, non zero otherwise
 */
static int spear_mtd_write(struct mtd_info *mtd, loff_t to, size_t len,
		size_t *retlen, const u8 *buf)
{
	struct spear_snor_flash *flash = get_flash_data(mtd);
	struct spear_smi *dev = mtd->priv;
	void *dest;
	u32 page_offset, page_size;
	int ret;

	if (!flash || !dev)
		return -ENODEV;

	if (!len)
		return 0;

	if (flash->bank > dev->num_flashes - 1) {
		dev_err(&dev->pdev->dev, "Invalid Bank Num");
		return -EINVAL;
	}

	if (!retlen)
		return -EINVAL;
	else
		*retlen = 0;

	/* select address as per bank number */
	dest = flash->base_addr + to;
	mutex_lock(&flash->lock);

	page_offset = (u32)to % flash->page_size;

	/* do if all the bytes fit onto one page */
	if (page_offset + len <= flash->page_size) {
		ret = spear_smi_cpy_toio(dev, flash->bank, dest, buf, len);
		if (!ret)
			*retlen += len;
	} else {
		u32 i;

		/* the size of data remaining on the first page */
		page_size = flash->page_size - page_offset;

		ret = spear_smi_cpy_toio(dev, flash->bank, dest, buf,
				page_size);
		if (ret)
			goto err_write;
		else
			*retlen += page_size;

		/* write everything in pagesize chunks */
		for (i = page_size; i < len; i += page_size) {
			page_size = len - i;
			if (page_size > flash->page_size)
				page_size = flash->page_size;

			ret = spear_smi_cpy_toio(dev, flash->bank, dest + i,
					buf + i, page_size);
			if (ret)
				break;
			else
				*retlen += page_size;
		}
	}

err_write:
	mutex_unlock(&flash->lock);

	return ret;
}

/**
 * spear_smi_probe_flash - Detects the NOR Flash chip.
 * @dev: structure of SMI information.
 * @bank: bank on which flash must be probed
 *
 * This routine will check whether there exists a flash chip on a given memory
 * bank ID.
 * Return index of the probed flash in flash devices structure
 */
static int spear_smi_probe_flash(struct spear_smi *dev, u32 bank)
{
	int ret;
	u32 val = 0;

	ret = spear_smi_wait_till_ready(dev, bank, SMI_PROBE_TIMEOUT);
	if (ret)
		return ret;

	mutex_lock(&dev->lock);

	dev->status = 0; /* Will be set in interrupt handler */
	/* put smi in sw mode */
	val = readl(dev->io_base + SMI_CR1);
	writel(val | SW_MODE, dev->io_base + SMI_CR1);

	/* send readid command in sw mode */
	writel(OPCODE_RDID, dev->io_base + SMI_TR);

	val = (bank << BANK_SHIFT) | SEND | (1 << TX_LEN_SHIFT) |
		(3 << RX_LEN_SHIFT) | TFIE;
	writel(val, dev->io_base + SMI_CR2);

	/* wait for TFF */
	ret = wait_event_interruptible_timeout(dev->cmd_complete,
			dev->status & TFF, SMI_CMD_TIMEOUT);
	if (ret <= 0) {
		ret = -ENODEV;
		goto err_probe;
	}

	/* get memory chip id */
	val = readl(dev->io_base + SMI_RR);
	val &= 0x00ffffff;
	ret = get_flash_index(val);

err_probe:
	/* clear sw mode */
	val = readl(dev->io_base + SMI_CR1);
	writel(val & ~SW_MODE, dev->io_base + SMI_CR1);

	mutex_unlock(&dev->lock);
	return ret;
}

static int spear_smi_setup_banks(struct platform_device *pdev, u32 bank)
{
	struct spear_smi *dev = platform_get_drvdata(pdev);
	struct spear_smi_flash_info *flash_info;
	struct spear_smi_plat_data *pdata;
	struct spear_snor_flash *flash;
	struct mtd_partition *parts;
	int count;
	int flash_index;
	int ret = 0;

	pdata = dev_get_platdata(&pdev->dev);
	if (bank > pdata->num_flashes - 1)
		return -EINVAL;

	flash_info = &pdata->board_flash_info[bank];
	if (!flash_info)
		return -ENODEV;

	flash = kzalloc(sizeof(*flash), GFP_ATOMIC);
	if (!flash)
		return -ENOMEM;
	flash->bank = bank;
	flash->fast_mode = flash_info->fast_mode ? 1 : 0;
	mutex_init(&flash->lock);

	/* verify whether nor flash is really present on board */
	flash_index = spear_smi_probe_flash(dev, bank);
	if (flash_index < 0) {
		dev_info(&dev->pdev->dev, "smi-nor%d not found\n", bank);
		ret = flash_index;
		goto err_probe;
	}
	/* map the memory for nor flash chip */
	flash->base_addr = ioremap(flash_info->mem_base, flash_info->size);
	if (!flash->base_addr) {
		ret = -EIO;
		goto err_probe;
	}

	dev->flash[bank] = flash;
	flash->mtd.priv = dev;

	if (flash_info->name)
		flash->mtd.name = flash_info->name;
	else
		flash->mtd.name = flash_devices[flash_index].name;

	flash->mtd.type = MTD_NORFLASH;
	flash->mtd.writesize = 1;
	flash->mtd.flags = MTD_CAP_NORFLASH;
	flash->mtd.size = flash_info->size;
	flash->mtd.erasesize = flash_devices[flash_index].sectorsize;
	flash->page_size = flash_devices[flash_index].pagesize;
	flash->mtd.writebufsize = flash->page_size;
	flash->erase_cmd = flash_devices[flash_index].erase_cmd;
	flash->mtd._erase = spear_mtd_erase;
	flash->mtd._read = spear_mtd_read;
	flash->mtd._write = spear_mtd_write;
	flash->dev_id = flash_devices[flash_index].device_id;

	dev_info(&dev->pdev->dev, "mtd .name=%s .size=%llx(%lluM)\n",
			flash->mtd.name, flash->mtd.size,
			flash->mtd.size / (1024 * 1024));

	dev_info(&dev->pdev->dev, ".erasesize = 0x%x(%uK)\n",
			flash->mtd.erasesize, flash->mtd.erasesize / 1024);

	if (flash_info->partitions) {
		parts = flash_info->partitions;
		count = flash_info->nr_partitions;
	} else {
		/* choose from default ones */
		switch (flash->mtd.size) {
		case 0x800000:/* 8MB */
			parts = part_info_8M;
			count = ARRAY_SIZE(part_info_8M);
			break;
		case 0x1000000:/* 16MB */
			parts = part_info_16M;
			count = ARRAY_SIZE(part_info_16M);
			break;
		default:
			dev_err(&pdev->dev, "undefined partition\n");
			ret = ENODEV;
			goto err_map;
		}
	}
	ret = mtd_device_parse_register(&flash->mtd, NULL, 0, parts, count);
	if (ret)
		dev_err(&dev->pdev->dev, "Err MTD partition=%d\n", ret);

	return ret;

err_map:
	iounmap(flash->base_addr);

err_probe:
	kfree(flash);
	return ret;
}

/**
 * spear_smi_probe - Entry routine
 * @pdev: platform device structure
 *
 * This is the first routine which gets invoked during booting and does all
 * initialization/allocation work. The routine looks for available memory banks,
 * and do proper init for any found one.
 * Returns 0 on success, non zero otherwise
 */
static int __devinit spear_smi_probe(struct platform_device *pdev)
{
	struct spear_smi_plat_data *pdata;
	struct spear_smi *dev;
	struct resource *smi_base;
	int irq, ret = 0;
	int i;

	pdata = dev_get_platdata(&pdev->dev);
	if (pdata < 0) {
		ret = -ENODEV;
		dev_err(&pdev->dev, "no platform data\n");
		goto err;
	}

	smi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	if (!smi_base) {
		ret = -ENODEV;
		dev_err(&pdev->dev, "invalid smi base address\n");
		goto err;
	}

	irq = platform_get_irq(pdev, 0);
	if (irq < 0) {
		ret = -ENODEV;
		dev_err(&pdev->dev, "invalid smi irq\n");
		goto err;
	}

	dev = kzalloc(sizeof(*dev), GFP_ATOMIC);
	if (!dev) {
		ret = -ENOMEM;
		dev_err(&pdev->dev, "mem alloc fail\n");
		goto err;
	}

	smi_base = request_mem_region(smi_base->start, resource_size(smi_base),
			pdev->name);
	if (!smi_base) {
		ret = -EBUSY;
		dev_err(&pdev->dev, "request mem region fail\n");
		goto err_mem;
	}

	dev->io_base = ioremap(smi_base->start, resource_size(smi_base));
	if (!dev->io_base) {
		ret = -EIO;
		dev_err(&pdev->dev, "ioremap fail\n");
		goto err_ioremap;
	}

	dev->pdev = pdev;
	dev->clk_rate = pdata->clk_rate;

	if (dev->clk_rate < 0 || dev->clk_rate > SMI_MAX_CLOCK_FREQ)
		dev->clk_rate = SMI_MAX_CLOCK_FREQ;

	dev->num_flashes = pdata->num_flashes;

	if (dev->num_flashes > MAX_NUM_FLASH_CHIP) {
		dev_err(&pdev->dev, "exceeding max number of flashes\n");
		dev->num_flashes = MAX_NUM_FLASH_CHIP;
	}

	dev->clk = clk_get(&pdev->dev, NULL);
	if (IS_ERR(dev->clk)) {
		ret = PTR_ERR(dev->clk);
		goto err_clk;
	}

	ret = clk_enable(dev->clk);
	if (ret)
		goto err_clk_enable;

	ret = request_irq(irq, spear_smi_int_handler, 0, pdev->name, dev);
	if (ret) {
		dev_err(&dev->pdev->dev, "SMI IRQ allocation failed\n");
		goto err_irq;
	}

	mutex_init(&dev->lock);
	init_waitqueue_head(&dev->cmd_complete);
	spear_smi_hw_init(dev);
	platform_set_drvdata(pdev, dev);

	/* loop for each serial nor-flash which is connected to smi */
	for (i = 0; i < dev->num_flashes; i++) {
		ret = spear_smi_setup_banks(pdev, i);
		if (ret) {
			dev_err(&dev->pdev->dev, "bank setup failed\n");
			goto err_bank_setup;
		}
	}

	return 0;

err_bank_setup:
	free_irq(irq, dev);
	platform_set_drvdata(pdev, NULL);
err_irq:
	clk_disable(dev->clk);
err_clk_enable:
	clk_put(dev->clk);
err_clk:
	iounmap(dev->io_base);
err_ioremap:
	release_mem_region(smi_base->start, resource_size(smi_base));
err_mem:
	kfree(dev);
err:
	return ret;
}

/**
 * spear_smi_remove - Exit routine
 * @pdev: platform device structure
 *
 * free all allocations and delete the partitions.
 */
static int __devexit spear_smi_remove(struct platform_device *pdev)
{
	struct spear_smi *dev;
	struct spear_snor_flash *flash;
	struct resource *smi_base;
	int ret;
	int i, irq;

	dev = platform_get_drvdata(pdev);
	if (!dev) {
		dev_err(&pdev->dev, "dev is null\n");
		return -ENODEV;
	}

	/* clean up for all nor flash */
	for (i = 0; i < dev->num_flashes; i++) {
		flash = dev->flash[i];
		if (!flash)
			continue;

		/* clean up mtd stuff */
		ret = mtd_device_unregister(&flash->mtd);
		if (ret)
			dev_err(&pdev->dev, "error removing mtd\n");

		iounmap(flash->base_addr);
		kfree(flash);
	}

	irq = platform_get_irq(pdev, 0);
	free_irq(irq, dev);

	clk_disable(dev->clk);
	clk_put(dev->clk);
	iounmap(dev->io_base);
	kfree(dev);

	smi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0);
	release_mem_region(smi_base->start, resource_size(smi_base));
	platform_set_drvdata(pdev, NULL);

	return 0;
}

int spear_smi_suspend(struct platform_device *pdev, pm_message_t state)
{
	struct spear_smi *dev = platform_get_drvdata(pdev);

	if (dev && dev->clk)
		clk_disable(dev->clk);

	return 0;
}

int spear_smi_resume(struct platform_device *pdev)
{
	struct spear_smi *dev = platform_get_drvdata(pdev);
	int ret = -EPERM;

	if (dev && dev->clk)
		ret = clk_enable(dev->clk);

	if (!ret)
		spear_smi_hw_init(dev);
	return ret;
}

static struct platform_driver spear_smi_driver = {
	.driver = {
		.name = "smi",
		.bus = &platform_bus_type,
		.owner = THIS_MODULE,
	},
	.probe = spear_smi_probe,
	.remove = __devexit_p(spear_smi_remove),
	.suspend = spear_smi_suspend,
	.resume = spear_smi_resume,
};

static int spear_smi_init(void)
{
	return platform_driver_register(&spear_smi_driver);
}
module_init(spear_smi_init);

static void spear_smi_exit(void)
{
	platform_driver_unregister(&spear_smi_driver);
}
module_exit(spear_smi_exit);

MODULE_LICENSE("GPL");
MODULE_AUTHOR("Ashish Priyadarshi, Shiraz Hashim <shiraz.hashim@st.com>");
MODULE_DESCRIPTION("MTD SMI driver for serial nor flash chips");