1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
1001
1002
1003
1004
1005
1006
1007
1008
1009
1010
1011
1012
1013
1014
1015
1016
1017
1018
1019
1020
1021
1022
1023
1024
1025
1026
1027
1028
1029
1030
1031
1032
1033
1034
1035
1036
1037
1038
1039
1040
1041
1042
1043
1044
1045
1046
1047
1048
1049
1050
1051
1052
1053
1054
1055
1056
1057
1058
1059
1060
1061
1062
1063
1064
1065
1066
1067
1068
1069
1070
1071
1072
1073
1074
1075
1076
1077
1078
1079
1080
1081
1082
1083
1084
1085
1086
1087
1088
1089
1090
1091
1092
1093
1094
1095
1096
1097
1098
1099
1100
1101
1102
1103
1104
1105
1106
1107
1108
1109
1110
1111
1112
1113
1114
1115
1116
1117
1118
1119
1120
1121
1122
1123
1124
1125
1126
1127
1128
1129
1130
1131
1132
1133
1134
1135
1136
1137
1138
1139
1140
1141
1142
1143
1144
1145
1146
1147
1148
1149
1150
1151
1152
1153
1154
1155
1156
1157
1158
1159
1160
1161
1162
1163
1164
1165
1166
1167
1168
1169
1170
1171
1172
1173
1174
1175
1176
1177
1178
1179
1180
1181
1182
1183
1184
1185
1186
1187
1188
1189
1190
1191
1192
1193
1194
1195
1196
1197
1198
1199
1200
1201
1202
1203
1204
1205
1206
1207
1208
1209
1210
1211
1212
1213
1214
1215
1216
1217
1218
1219
1220
1221
1222
1223
1224
1225
1226
1227
1228
1229
1230
1231
1232
1233
1234
1235
1236
1237
1238
1239
1240
1241
1242
1243
1244
1245
1246
1247
1248
1249
1250
1251
1252
1253
1254
1255
1256
1257
1258
1259
1260
1261
1262
1263
1264
1265
1266
1267
1268
1269
1270
1271
1272
1273
1274
1275
1276
1277
1278
1279
1280
1281
1282
1283
1284
1285
1286
1287
1288
1289
1290
1291
1292
1293
|
/*
* This file is part of wl1271
*
* Copyright (C) 2009 Nokia Corporation
*
* Contact: Luciano Coelho <luciano.coelho@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*
*/
#ifndef __CONF_H__
#define __CONF_H__
enum {
CONF_HW_BIT_RATE_1MBPS = BIT(0),
CONF_HW_BIT_RATE_2MBPS = BIT(1),
CONF_HW_BIT_RATE_5_5MBPS = BIT(2),
CONF_HW_BIT_RATE_6MBPS = BIT(3),
CONF_HW_BIT_RATE_9MBPS = BIT(4),
CONF_HW_BIT_RATE_11MBPS = BIT(5),
CONF_HW_BIT_RATE_12MBPS = BIT(6),
CONF_HW_BIT_RATE_18MBPS = BIT(7),
CONF_HW_BIT_RATE_22MBPS = BIT(8),
CONF_HW_BIT_RATE_24MBPS = BIT(9),
CONF_HW_BIT_RATE_36MBPS = BIT(10),
CONF_HW_BIT_RATE_48MBPS = BIT(11),
CONF_HW_BIT_RATE_54MBPS = BIT(12),
CONF_HW_BIT_RATE_MCS_0 = BIT(13),
CONF_HW_BIT_RATE_MCS_1 = BIT(14),
CONF_HW_BIT_RATE_MCS_2 = BIT(15),
CONF_HW_BIT_RATE_MCS_3 = BIT(16),
CONF_HW_BIT_RATE_MCS_4 = BIT(17),
CONF_HW_BIT_RATE_MCS_5 = BIT(18),
CONF_HW_BIT_RATE_MCS_6 = BIT(19),
CONF_HW_BIT_RATE_MCS_7 = BIT(20),
CONF_HW_BIT_RATE_MCS_8 = BIT(21),
CONF_HW_BIT_RATE_MCS_9 = BIT(22),
CONF_HW_BIT_RATE_MCS_10 = BIT(23),
CONF_HW_BIT_RATE_MCS_11 = BIT(24),
CONF_HW_BIT_RATE_MCS_12 = BIT(25),
CONF_HW_BIT_RATE_MCS_13 = BIT(26),
CONF_HW_BIT_RATE_MCS_14 = BIT(27),
CONF_HW_BIT_RATE_MCS_15 = BIT(28),
};
enum {
CONF_HW_RATE_INDEX_1MBPS = 0,
CONF_HW_RATE_INDEX_2MBPS = 1,
CONF_HW_RATE_INDEX_5_5MBPS = 2,
CONF_HW_RATE_INDEX_6MBPS = 3,
CONF_HW_RATE_INDEX_9MBPS = 4,
CONF_HW_RATE_INDEX_11MBPS = 5,
CONF_HW_RATE_INDEX_12MBPS = 6,
CONF_HW_RATE_INDEX_18MBPS = 7,
CONF_HW_RATE_INDEX_22MBPS = 8,
CONF_HW_RATE_INDEX_24MBPS = 9,
CONF_HW_RATE_INDEX_36MBPS = 10,
CONF_HW_RATE_INDEX_48MBPS = 11,
CONF_HW_RATE_INDEX_54MBPS = 12,
CONF_HW_RATE_INDEX_MAX = CONF_HW_RATE_INDEX_54MBPS,
};
#define CONF_HW_RXTX_RATE_UNSUPPORTED 0xff
enum {
CONF_SG_DISABLE = 0,
CONF_SG_PROTECTIVE,
CONF_SG_OPPORTUNISTIC
};
enum {
/*
* Configure the min and max time BT gains the antenna
* in WLAN / BT master basic rate
*
* Range: 0 - 255 (ms)
*/
CONF_SG_ACL_BT_MASTER_MIN_BR = 0,
CONF_SG_ACL_BT_MASTER_MAX_BR,
/*
* Configure the min and max time BT gains the antenna
* in WLAN / BT slave basic rate
*
* Range: 0 - 255 (ms)
*/
CONF_SG_ACL_BT_SLAVE_MIN_BR,
CONF_SG_ACL_BT_SLAVE_MAX_BR,
/*
* Configure the min and max time BT gains the antenna
* in WLAN / BT master EDR
*
* Range: 0 - 255 (ms)
*/
CONF_SG_ACL_BT_MASTER_MIN_EDR,
CONF_SG_ACL_BT_MASTER_MAX_EDR,
/*
* Configure the min and max time BT gains the antenna
* in WLAN / BT slave EDR
*
* Range: 0 - 255 (ms)
*/
CONF_SG_ACL_BT_SLAVE_MIN_EDR,
CONF_SG_ACL_BT_SLAVE_MAX_EDR,
/*
* The maximum time WLAN can gain the antenna
* in WLAN PSM / BT master/slave BR
*
* Range: 0 - 255 (ms)
*/
CONF_SG_ACL_WLAN_PS_MASTER_BR,
CONF_SG_ACL_WLAN_PS_SLAVE_BR,
/*
* The maximum time WLAN can gain the antenna
* in WLAN PSM / BT master/slave EDR
*
* Range: 0 - 255 (ms)
*/
CONF_SG_ACL_WLAN_PS_MASTER_EDR,
CONF_SG_ACL_WLAN_PS_SLAVE_EDR,
/* TODO: explain these values */
CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR,
CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR,
CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR,
CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR,
CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR,
CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR,
CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR,
CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR,
CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR,
CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR,
CONF_SG_ACL_PASSIVE_SCAN_BT_BR,
CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR,
CONF_SG_ACL_PASSIVE_SCAN_BT_EDR,
CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR,
/*
* Compensation percentage of probe requests when scan initiated
* during BT voice/ACL link.
*
* Range: 0 - 255 (%)
*/
CONF_SG_AUTO_SCAN_PROBE_REQ,
/*
* Compensation percentage of probe requests when active scan initiated
* during BT voice
*
* Range: 0 - 255 (%)
*/
CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,
/*
* Compensation percentage of WLAN active scan window if initiated
* during BT A2DP
*
* Range: 0 - 1000 (%)
*/
CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,
/*
* Compensation percentage of WLAN passive scan window if initiated
* during BT A2DP BR
*
* Range: 0 - 1000 (%)
*/
CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_BR,
/*
* Compensation percentage of WLAN passive scan window if initiated
* during BT A2DP EDR
*
* Range: 0 - 1000 (%)
*/
CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_EDR,
/*
* Compensation percentage of WLAN passive scan window if initiated
* during BT voice
*
* Range: 0 - 1000 (%)
*/
CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,
/* TODO: explain these values */
CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN,
CONF_SG_BCN_HV3_COLLISION_THRESH_IN_PASSIVE_SCAN,
CONF_SG_TX_RX_PROTECTION_BWIDTH_IN_PASSIVE_SCAN,
/*
* Defines whether the SG will force WLAN host to enter/exit PSM
*
* Range: 1 - SG can force, 0 - host handles PSM
*/
CONF_SG_STA_FORCE_PS_IN_BT_SCO,
/*
* Defines antenna configuration (single/dual antenna)
*
* Range: 0 - single antenna, 1 - dual antenna
*/
CONF_SG_ANTENNA_CONFIGURATION,
/*
* The threshold (percent) of max consecutive beacon misses before
* increasing priority of beacon reception.
*
* Range: 0 - 100 (%)
*/
CONF_SG_BEACON_MISS_PERCENT,
/*
* Protection time of the DHCP procedure.
*
* Range: 0 - 100000 (ms)
*/
CONF_SG_DHCP_TIME,
/*
* RX guard time before the beginning of a new BT voice frame during
* which no new WLAN trigger frame is transmitted.
*
* Range: 0 - 100000 (us)
*/
CONF_SG_RXT,
/*
* TX guard time before the beginning of a new BT voice frame during
* which no new WLAN frame is transmitted.
*
* Range: 0 - 100000 (us)
*/
CONF_SG_TXT,
/*
* Enable adaptive RXT/TXT algorithm. If disabled, the host values
* will be utilized.
*
* Range: 0 - disable, 1 - enable
*/
CONF_SG_ADAPTIVE_RXT_TXT,
/* TODO: explain this value */
CONF_SG_GENERAL_USAGE_BIT_MAP,
/*
* Number of consecutive BT voice frames not interrupted by WLAN
*
* Range: 0 - 100
*/
CONF_SG_HV3_MAX_SERVED,
/*
* The used WLAN legacy service period during active BT ACL link
*
* Range: 0 - 255 (ms)
*/
CONF_SG_PS_POLL_TIMEOUT,
/*
* The used WLAN UPSD service period during active BT ACL link
*
* Range: 0 - 255 (ms)
*/
CONF_SG_UPSD_TIMEOUT,
CONF_SG_CONSECUTIVE_CTS_THRESHOLD,
CONF_SG_STA_RX_WINDOW_AFTER_DTIM,
CONF_SG_STA_CONNECTION_PROTECTION_TIME,
/* AP params */
CONF_AP_BEACON_MISS_TX,
CONF_AP_RX_WINDOW_AFTER_BEACON,
CONF_AP_BEACON_WINDOW_INTERVAL,
CONF_AP_CONNECTION_PROTECTION_TIME,
CONF_AP_BT_ACL_VAL_BT_SERVE_TIME,
CONF_AP_BT_ACL_VAL_WL_SERVE_TIME,
/* CTS Diluting params */
CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH,
CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER,
CONF_SG_TEMP_PARAM_1,
CONF_SG_TEMP_PARAM_2,
CONF_SG_TEMP_PARAM_3,
CONF_SG_TEMP_PARAM_4,
CONF_SG_TEMP_PARAM_5,
CONF_SG_TEMP_PARAM_6,
CONF_SG_TEMP_PARAM_7,
CONF_SG_TEMP_PARAM_8,
CONF_SG_TEMP_PARAM_9,
CONF_SG_TEMP_PARAM_10,
CONF_SG_PARAMS_MAX,
CONF_SG_PARAMS_ALL = 0xff
};
struct conf_sg_settings {
u32 params[CONF_SG_PARAMS_MAX];
u8 state;
};
enum conf_rx_queue_type {
CONF_RX_QUEUE_TYPE_LOW_PRIORITY, /* All except the high priority */
CONF_RX_QUEUE_TYPE_HIGH_PRIORITY, /* Management and voice packets */
};
struct conf_rx_settings {
/*
* The maximum amount of time, in TU, before the
* firmware discards the MSDU.
*
* Range: 0 - 0xFFFFFFFF
*/
u32 rx_msdu_life_time;
/*
* Packet detection threshold in the PHY.
*
* FIXME: details unknown.
*/
u32 packet_detection_threshold;
/*
* The longest time the STA will wait to receive traffic from the AP
* after a PS-poll has been transmitted.
*
* Range: 0 - 200000
*/
u16 ps_poll_timeout;
/*
* The longest time the STA will wait to receive traffic from the AP
* after a frame has been sent from an UPSD enabled queue.
*
* Range: 0 - 200000
*/
u16 upsd_timeout;
/*
* The number of octets in an MPDU, below which an RTS/CTS
* handshake is not performed.
*
* Range: 0 - 4096
*/
u16 rts_threshold;
/*
* The RX Clear Channel Assessment threshold in the PHY
* (the energy threshold).
*
* Range: ENABLE_ENERGY_D == 0x140A
* DISABLE_ENERGY_D == 0xFFEF
*/
u16 rx_cca_threshold;
/*
* Occupied Rx mem-blocks number which requires interrupting the host
* (0 = no buffering, 0xffff = disabled).
*
* Range: u16
*/
u16 irq_blk_threshold;
/*
* Rx packets number which requires interrupting the host
* (0 = no buffering).
*
* Range: u16
*/
u16 irq_pkt_threshold;
/*
* Max time in msec the FW may delay RX-Complete interrupt.
*
* Range: 1 - 100
*/
u16 irq_timeout;
/*
* The RX queue type.
*
* Range: RX_QUEUE_TYPE_RX_LOW_PRIORITY, RX_QUEUE_TYPE_RX_HIGH_PRIORITY,
*/
u8 queue_type;
};
#define CONF_TX_MAX_RATE_CLASSES 10
#define CONF_TX_RATE_MASK_UNSPECIFIED 0
#define CONF_TX_RATE_MASK_BASIC (CONF_HW_BIT_RATE_1MBPS | \
CONF_HW_BIT_RATE_2MBPS)
#define CONF_TX_RATE_RETRY_LIMIT 10
/* basic rates for p2p operations (probe req/resp, etc.) */
#define CONF_TX_RATE_MASK_BASIC_P2P (CONF_HW_BIT_RATE_6MBPS | \
CONF_HW_BIT_RATE_12MBPS | CONF_HW_BIT_RATE_24MBPS)
/*
* Rates supported for data packets when operating as AP. Note the absence
* of the 22Mbps rate. There is a FW limitation on 12 rates so we must drop
* one. The rate dropped is not mandatory under any operating mode.
*/
#define CONF_TX_AP_ENABLED_RATES (CONF_HW_BIT_RATE_1MBPS | \
CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS | \
CONF_HW_BIT_RATE_6MBPS | CONF_HW_BIT_RATE_9MBPS | \
CONF_HW_BIT_RATE_11MBPS | CONF_HW_BIT_RATE_12MBPS | \
CONF_HW_BIT_RATE_18MBPS | CONF_HW_BIT_RATE_24MBPS | \
CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS | \
CONF_HW_BIT_RATE_54MBPS)
#define CONF_TX_CCK_RATES (CONF_HW_BIT_RATE_1MBPS | \
CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS | \
CONF_HW_BIT_RATE_11MBPS)
#define CONF_TX_OFDM_RATES (CONF_HW_BIT_RATE_6MBPS | \
CONF_HW_BIT_RATE_12MBPS | CONF_HW_BIT_RATE_24MBPS | \
CONF_HW_BIT_RATE_36MBPS | CONF_HW_BIT_RATE_48MBPS | \
CONF_HW_BIT_RATE_54MBPS)
#define CONF_TX_MCS_RATES (CONF_HW_BIT_RATE_MCS_0 | \
CONF_HW_BIT_RATE_MCS_1 | CONF_HW_BIT_RATE_MCS_2 | \
CONF_HW_BIT_RATE_MCS_3 | CONF_HW_BIT_RATE_MCS_4 | \
CONF_HW_BIT_RATE_MCS_5 | CONF_HW_BIT_RATE_MCS_6 | \
CONF_HW_BIT_RATE_MCS_7)
#define CONF_TX_MIMO_RATES (CONF_HW_BIT_RATE_MCS_8 | \
CONF_HW_BIT_RATE_MCS_9 | CONF_HW_BIT_RATE_MCS_10 | \
CONF_HW_BIT_RATE_MCS_11 | CONF_HW_BIT_RATE_MCS_12 | \
CONF_HW_BIT_RATE_MCS_13 | CONF_HW_BIT_RATE_MCS_14 | \
CONF_HW_BIT_RATE_MCS_15)
/*
* Default rates for management traffic when operating in AP mode. This
* should be configured according to the basic rate set of the AP
*/
#define CONF_TX_AP_DEFAULT_MGMT_RATES (CONF_HW_BIT_RATE_1MBPS | \
CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS)
/* default rates for working as IBSS (11b and OFDM) */
#define CONF_TX_IBSS_DEFAULT_RATES (CONF_HW_BIT_RATE_1MBPS | \
CONF_HW_BIT_RATE_2MBPS | CONF_HW_BIT_RATE_5_5MBPS | \
CONF_HW_BIT_RATE_11MBPS | CONF_TX_OFDM_RATES);
struct conf_tx_rate_class {
/*
* The rates enabled for this rate class.
*
* Range: CONF_HW_BIT_RATE_* bit mask
*/
u32 enabled_rates;
/*
* The dot11 short retry limit used for TX retries.
*
* Range: u8
*/
u8 short_retry_limit;
/*
* The dot11 long retry limit used for TX retries.
*
* Range: u8
*/
u8 long_retry_limit;
/*
* Flags controlling the attributes of TX transmission.
*
* Range: bit 0: Truncate - when set, FW attempts to send a frame stop
* when the total valid per-rate attempts have
* been exhausted; otherwise transmissions
* will continue at the lowest available rate
* until the appropriate one of the
* short_retry_limit, long_retry_limit,
* dot11_max_transmit_msdu_life_time, or
* max_tx_life_time, is exhausted.
* 1: Preamble Override - indicates if the preamble type
* should be used in TX.
* 2: Preamble Type - the type of the preamble to be used by
* the policy (0 - long preamble, 1 - short preamble.
*/
u8 aflags;
};
#define CONF_TX_MAX_AC_COUNT 4
/* Slot number setting to start transmission at PIFS interval */
#define CONF_TX_AIFS_PIFS 1
/* Slot number setting to start transmission at DIFS interval normal
* DCF access */
#define CONF_TX_AIFS_DIFS 2
enum conf_tx_ac {
CONF_TX_AC_BE = 0, /* best effort / legacy */
CONF_TX_AC_BK = 1, /* background */
CONF_TX_AC_VI = 2, /* video */
CONF_TX_AC_VO = 3, /* voice */
CONF_TX_AC_CTS2SELF = 4, /* fictitious AC, follows AC_VO */
CONF_TX_AC_ANY_TID = 0xff
};
struct conf_tx_ac_category {
/*
* The AC class identifier.
*
* Range: enum conf_tx_ac
*/
u8 ac;
/*
* The contention window minimum size (in slots) for the access
* class.
*
* Range: u8
*/
u8 cw_min;
/*
* The contention window maximum size (in slots) for the access
* class.
*
* Range: u8
*/
u16 cw_max;
/*
* The AIF value (in slots) for the access class.
*
* Range: u8
*/
u8 aifsn;
/*
* The TX Op Limit (in microseconds) for the access class.
*
* Range: u16
*/
u16 tx_op_limit;
};
#define CONF_TX_MAX_TID_COUNT 8
/* Allow TX BA on all TIDs but 6,7. These are currently reserved in the FW */
#define CONF_TX_BA_ENABLED_TID_BITMAP 0x3F
enum {
CONF_CHANNEL_TYPE_DCF = 0, /* DC/LEGACY*/
CONF_CHANNEL_TYPE_EDCF = 1, /* EDCA*/
CONF_CHANNEL_TYPE_HCCA = 2, /* HCCA*/
};
enum {
CONF_PS_SCHEME_LEGACY = 0,
CONF_PS_SCHEME_UPSD_TRIGGER = 1,
CONF_PS_SCHEME_LEGACY_PSPOLL = 2,
CONF_PS_SCHEME_SAPSD = 3,
};
enum {
CONF_ACK_POLICY_LEGACY = 0,
CONF_ACK_POLICY_NO_ACK = 1,
CONF_ACK_POLICY_BLOCK = 2,
};
struct conf_tx_tid {
u8 queue_id;
u8 channel_type;
u8 tsid;
u8 ps_scheme;
u8 ack_policy;
u32 apsd_conf[2];
};
struct conf_tx_settings {
/*
* The TX ED value for TELEC Enable/Disable.
*
* Range: 0, 1
*/
u8 tx_energy_detection;
/*
* Configuration for rate classes for TX (currently only one
* rate class supported). Used in non-AP mode.
*/
struct conf_tx_rate_class sta_rc_conf;
/*
* Configuration for access categories for TX rate control.
*/
u8 ac_conf_count;
struct conf_tx_ac_category ac_conf[CONF_TX_MAX_AC_COUNT];
/*
* AP-mode - allow this number of TX retries to a station before an
* event is triggered from FW.
* In AP-mode the hlids of unreachable stations are given in the
* "sta_tx_retry_exceeded" member in the event mailbox.
*/
u8 max_tx_retries;
/*
* AP-mode - after this number of seconds a connected station is
* considered inactive.
*/
u16 ap_aging_period;
/*
* Configuration for TID parameters.
*/
u8 tid_conf_count;
struct conf_tx_tid tid_conf[CONF_TX_MAX_TID_COUNT];
/*
* The TX fragmentation threshold.
*
* Range: u16
*/
u16 frag_threshold;
/*
* Max time in msec the FW may delay frame TX-Complete interrupt.
*
* Range: u16
*/
u16 tx_compl_timeout;
/*
* Completed TX packet count which requires to issue the TX-Complete
* interrupt.
*
* Range: u16
*/
u16 tx_compl_threshold;
/*
* The rate used for control messages and scanning on the 2.4GHz band
*
* Range: CONF_HW_BIT_RATE_* bit mask
*/
u32 basic_rate;
/*
* The rate used for control messages and scanning on the 5GHz band
*
* Range: CONF_HW_BIT_RATE_* bit mask
*/
u32 basic_rate_5;
/*
* TX retry limits for templates
*/
u8 tmpl_short_retry_limit;
u8 tmpl_long_retry_limit;
/* Time in ms for Tx watchdog timer to expire */
u32 tx_watchdog_timeout;
};
enum {
CONF_WAKE_UP_EVENT_BEACON = 0x01, /* Wake on every Beacon*/
CONF_WAKE_UP_EVENT_DTIM = 0x02, /* Wake on every DTIM*/
CONF_WAKE_UP_EVENT_N_DTIM = 0x04, /* Wake every Nth DTIM */
CONF_WAKE_UP_EVENT_N_BEACONS = 0x08, /* Wake every Nth beacon */
CONF_WAKE_UP_EVENT_BITS_MASK = 0x0F
};
#define CONF_MAX_BCN_FILT_IE_COUNT 32
#define CONF_BCN_RULE_PASS_ON_CHANGE BIT(0)
#define CONF_BCN_RULE_PASS_ON_APPEARANCE BIT(1)
#define CONF_BCN_IE_OUI_LEN 3
#define CONF_BCN_IE_VER_LEN 2
struct conf_bcn_filt_rule {
/*
* IE number to which to associate a rule.
*
* Range: u8
*/
u8 ie;
/*
* Rule to associate with the specific ie.
*
* Range: CONF_BCN_RULE_PASS_ON_*
*/
u8 rule;
/*
* OUI for the vendor specifie IE (221)
*/
u8 oui[CONF_BCN_IE_OUI_LEN];
/*
* Type for the vendor specifie IE (221)
*/
u8 type;
/*
* Version for the vendor specifie IE (221)
*/
u8 version[CONF_BCN_IE_VER_LEN];
};
#define CONF_MAX_RSSI_SNR_TRIGGERS 8
enum {
CONF_TRIG_METRIC_RSSI_BEACON = 0,
CONF_TRIG_METRIC_RSSI_DATA,
CONF_TRIG_METRIC_SNR_BEACON,
CONF_TRIG_METRIC_SNR_DATA
};
enum {
CONF_TRIG_EVENT_TYPE_LEVEL = 0,
CONF_TRIG_EVENT_TYPE_EDGE
};
enum {
CONF_TRIG_EVENT_DIR_LOW = 0,
CONF_TRIG_EVENT_DIR_HIGH,
CONF_TRIG_EVENT_DIR_BIDIR
};
struct conf_sig_weights {
/*
* RSSI from beacons average weight.
*
* Range: u8
*/
u8 rssi_bcn_avg_weight;
/*
* RSSI from data average weight.
*
* Range: u8
*/
u8 rssi_pkt_avg_weight;
/*
* SNR from beacons average weight.
*
* Range: u8
*/
u8 snr_bcn_avg_weight;
/*
* SNR from data average weight.
*
* Range: u8
*/
u8 snr_pkt_avg_weight;
};
enum conf_bcn_filt_mode {
CONF_BCN_FILT_MODE_DISABLED = 0,
CONF_BCN_FILT_MODE_ENABLED = 1
};
enum conf_bet_mode {
CONF_BET_MODE_DISABLE = 0,
CONF_BET_MODE_ENABLE = 1,
};
struct conf_conn_settings {
/*
* Firmware wakeup conditions configuration. The host may set only
* one bit.
*
* Range: CONF_WAKE_UP_EVENT_*
*/
u8 wake_up_event;
/*
* Listen interval for beacons or Dtims.
*
* Range: 0 for beacon and Dtim wakeup
* 1-10 for x Dtims
* 1-255 for x beacons
*/
u8 listen_interval;
/*
* Firmware wakeup conditions during suspend
* Range: CONF_WAKE_UP_EVENT_*
*/
u8 suspend_wake_up_event;
/*
* Listen interval during suspend.
* Currently will be in DTIMs (1-10)
*
*/
u8 suspend_listen_interval;
/*
* Enable or disable the beacon filtering.
*
* Range: CONF_BCN_FILT_MODE_*
*/
enum conf_bcn_filt_mode bcn_filt_mode;
/*
* Configure Beacon filter pass-thru rules.
*/
u8 bcn_filt_ie_count;
struct conf_bcn_filt_rule bcn_filt_ie[CONF_MAX_BCN_FILT_IE_COUNT];
/*
* The number of consecutive beacons to lose, before the firmware
* becomes out of synch.
*
* Range: u32
*/
u32 synch_fail_thold;
/*
* After out-of-synch, the number of TU's to wait without a further
* received beacon (or probe response) before issuing the BSS_EVENT_LOSE
* event.
*
* Range: u32
*/
u32 bss_lose_timeout;
/*
* Beacon receive timeout.
*
* Range: u32
*/
u32 beacon_rx_timeout;
/*
* Broadcast receive timeout.
*
* Range: u32
*/
u32 broadcast_timeout;
/*
* Enable/disable reception of broadcast packets in power save mode
*
* Range: 1 - enable, 0 - disable
*/
u8 rx_broadcast_in_ps;
/*
* Consecutive PS Poll failures before sending event to driver
*
* Range: u8
*/
u8 ps_poll_threshold;
/*
* Configuration of signal average weights.
*/
struct conf_sig_weights sig_weights;
/*
* Specifies if beacon early termination procedure is enabled or
* disabled.
*
* Range: CONF_BET_MODE_*
*/
u8 bet_enable;
/*
* Specifies the maximum number of consecutive beacons that may be
* early terminated. After this number is reached at least one full
* beacon must be correctly received in FW before beacon ET
* resumes.
*
* Range 0 - 255
*/
u8 bet_max_consecutive;
/*
* Specifies the maximum number of times to try PSM entry if it fails
* (if sending the appropriate null-func message fails.)
*
* Range 0 - 255
*/
u8 psm_entry_retries;
/*
* Specifies the maximum number of times to try PSM exit if it fails
* (if sending the appropriate null-func message fails.)
*
* Range 0 - 255
*/
u8 psm_exit_retries;
/*
* Specifies the maximum number of times to try transmit the PSM entry
* null-func frame for each PSM entry attempt
*
* Range 0 - 255
*/
u8 psm_entry_nullfunc_retries;
/*
* Specifies the dynamic PS timeout in ms that will be used
* by the FW when in AUTO_PS mode
*/
u16 dynamic_ps_timeout;
/*
* Specifies whether dynamic PS should be disabled and PSM forced.
* This is required for certain WiFi certification tests.
*/
u8 forced_ps;
/*
*
* Specifies the interval of the connection keep-alive null-func
* frame in ms.
*
* Range: 1000 - 3600000
*/
u32 keep_alive_interval;
/*
* Maximum listen interval supported by the driver in units of beacons.
*
* Range: u16
*/
u8 max_listen_interval;
};
enum {
CONF_REF_CLK_19_2_E,
CONF_REF_CLK_26_E,
CONF_REF_CLK_38_4_E,
CONF_REF_CLK_52_E,
CONF_REF_CLK_38_4_M_XTAL,
CONF_REF_CLK_26_M_XTAL,
};
enum single_dual_band_enum {
CONF_SINGLE_BAND,
CONF_DUAL_BAND
};
#define CONF_RSSI_AND_PROCESS_COMPENSATION_SIZE 15
#define CONF_NUMBER_OF_SUB_BANDS_5 7
#define CONF_NUMBER_OF_RATE_GROUPS 6
#define CONF_NUMBER_OF_CHANNELS_2_4 14
#define CONF_NUMBER_OF_CHANNELS_5 35
struct conf_itrim_settings {
/* enable dco itrim */
u8 enable;
/* moderation timeout in microsecs from the last TX */
u32 timeout;
};
enum conf_fast_wakeup {
CONF_FAST_WAKEUP_ENABLE,
CONF_FAST_WAKEUP_DISABLE,
};
struct conf_pm_config_settings {
/*
* Host clock settling time
*
* Range: 0 - 30000 us
*/
u32 host_clk_settling_time;
/*
* Host fast wakeup support
*
* Range: enum conf_fast_wakeup
*/
u8 host_fast_wakeup_support;
};
struct conf_roam_trigger_settings {
/*
* The minimum interval between two trigger events.
*
* Range: 0 - 60000 ms
*/
u16 trigger_pacing;
/*
* The weight for rssi/beacon average calculation
*
* Range: 0 - 255
*/
u8 avg_weight_rssi_beacon;
/*
* The weight for rssi/data frame average calculation
*
* Range: 0 - 255
*/
u8 avg_weight_rssi_data;
/*
* The weight for snr/beacon average calculation
*
* Range: 0 - 255
*/
u8 avg_weight_snr_beacon;
/*
* The weight for snr/data frame average calculation
*
* Range: 0 - 255
*/
u8 avg_weight_snr_data;
};
struct conf_scan_settings {
/*
* The minimum time to wait on each channel for active scans
*
* Range: u32 tu/1000
*/
u32 min_dwell_time_active;
/*
* The maximum time to wait on each channel for active scans
*
* Range: u32 tu/1000
*/
u32 max_dwell_time_active;
/*
* The minimum time to wait on each channel for passive scans
*
* Range: u32 tu/1000
*/
u32 min_dwell_time_passive;
/*
* The maximum time to wait on each channel for passive scans
*
* Range: u32 tu/1000
*/
u32 max_dwell_time_passive;
/*
* Number of probe requests to transmit on each active scan channel
*
* Range: u8
*/
u16 num_probe_reqs;
/*
* Scan trigger (split scan) timeout. The FW will split the scan
* operation into slices of the given time and allow the FW to schedule
* other tasks in between.
*
* Range: u32 Microsecs
*/
u32 split_scan_timeout;
};
struct conf_sched_scan_settings {
/*
* The base time to wait on the channel for active scans (in TU/1000).
* The minimum dwell time is calculated according to this:
* min_dwell_time = base + num_of_probes_to_be_sent * delta_per_probe
* The maximum dwell time is calculated according to this:
* max_dwell_time = min_dwell_time + max_dwell_time_delta
*/
u32 base_dwell_time;
/* The delta between the min dwell time and max dwell time for
* active scans (in TU/1000s). The max dwell time is used by the FW once
* traffic is detected on the channel.
*/
u32 max_dwell_time_delta;
/* Delta added to min dwell time per each probe in 2.4 GHz (TU/1000) */
u32 dwell_time_delta_per_probe;
/* Delta added to min dwell time per each probe in 5 GHz (TU/1000) */
u32 dwell_time_delta_per_probe_5;
/* time to wait on the channel for passive scans (in TU/1000) */
u32 dwell_time_passive;
/* time to wait on the channel for DFS scans (in TU/1000) */
u32 dwell_time_dfs;
/* number of probe requests to send on each channel in active scans */
u8 num_probe_reqs;
/* RSSI threshold to be used for filtering */
s8 rssi_threshold;
/* SNR threshold to be used for filtering */
s8 snr_threshold;
};
struct conf_ht_setting {
u8 rx_ba_win_size;
u8 tx_ba_win_size;
u16 inactivity_timeout;
/* bitmap of enabled TIDs for TX BA sessions */
u8 tx_ba_tid_bitmap;
};
struct conf_memory_settings {
/* Number of stations supported in IBSS mode */
u8 num_stations;
/* Number of ssid profiles used in IBSS mode */
u8 ssid_profiles;
/* Number of memory buffers allocated to rx pool */
u8 rx_block_num;
/* Minimum number of blocks allocated to tx pool */
u8 tx_min_block_num;
/* Disable/Enable dynamic memory */
u8 dynamic_memory;
/*
* Minimum required free tx memory blocks in order to assure optimum
* performance
*
* Range: 0-120
*/
u8 min_req_tx_blocks;
/*
* Minimum required free rx memory blocks in order to assure optimum
* performance
*
* Range: 0-120
*/
u8 min_req_rx_blocks;
/*
* Minimum number of mem blocks (free+used) guaranteed for TX
*
* Range: 0-120
*/
u8 tx_min;
};
struct conf_fm_coex {
u8 enable;
u8 swallow_period;
u8 n_divider_fref_set_1;
u8 n_divider_fref_set_2;
u16 m_divider_fref_set_1;
u16 m_divider_fref_set_2;
u32 coex_pll_stabilization_time;
u16 ldo_stabilization_time;
u8 fm_disturbed_band_margin;
u8 swallow_clk_diff;
};
struct conf_rx_streaming_settings {
/*
* RX Streaming duration (in msec) from last tx/rx
*
* Range: u32
*/
u32 duration;
/*
* Bitmap of tids to be polled during RX streaming.
* (Note: it doesn't look like it really matters)
*
* Range: 0x1-0xff
*/
u8 queues;
/*
* RX Streaming interval.
* (Note:this value is also used as the rx streaming timeout)
* Range: 0 (disabled), 10 - 100
*/
u8 interval;
/*
* enable rx streaming also when there is no coex activity
*/
u8 always;
};
struct conf_fwlog {
/* Continuous or on-demand */
u8 mode;
/*
* Number of memory blocks dedicated for the FW logger
*
* Range: 1-3, or 0 to disable the FW logger
*/
u8 mem_blocks;
/* Minimum log level threshold */
u8 severity;
/* Include/exclude timestamps from the log messages */
u8 timestamp;
/* See enum wl1271_fwlogger_output */
u8 output;
/* Regulates the frequency of log messages */
u8 threshold;
};
#define ACX_RATE_MGMT_NUM_OF_RATES 13
struct conf_rate_policy_settings {
u16 rate_retry_score;
u16 per_add;
u16 per_th1;
u16 per_th2;
u16 max_per;
u8 inverse_curiosity_factor;
u8 tx_fail_low_th;
u8 tx_fail_high_th;
u8 per_alpha_shift;
u8 per_add_shift;
u8 per_beta1_shift;
u8 per_beta2_shift;
u8 rate_check_up;
u8 rate_check_down;
u8 rate_retry_policy[ACX_RATE_MGMT_NUM_OF_RATES];
};
struct conf_hangover_settings {
u32 recover_time;
u8 hangover_period;
u8 dynamic_mode;
u8 early_termination_mode;
u8 max_period;
u8 min_period;
u8 increase_delta;
u8 decrease_delta;
u8 quiet_time;
u8 increase_time;
u8 window_size;
};
struct wlcore_conf {
struct conf_sg_settings sg;
struct conf_rx_settings rx;
struct conf_tx_settings tx;
struct conf_conn_settings conn;
struct conf_itrim_settings itrim;
struct conf_pm_config_settings pm_config;
struct conf_roam_trigger_settings roam_trigger;
struct conf_scan_settings scan;
struct conf_sched_scan_settings sched_scan;
struct conf_ht_setting ht;
struct conf_memory_settings mem;
struct conf_fm_coex fm_coex;
struct conf_rx_streaming_settings rx_streaming;
struct conf_fwlog fwlog;
struct conf_rate_policy_settings rate;
struct conf_hangover_settings hangover;
};
#endif
|