diff options
| author | Linus Walleij <linus.walleij@linaro.org> | 2016-01-27 21:03:23 (GMT) |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2016-09-09 21:16:07 (GMT) |
| commit | 17470b7da11c137267c74ff0d2d4cca56f595c60 (patch) | |
| tree | 31e76bbb4b4820b6011c52bb88cd71fb727a8182 | |
| parent | 6fb2de9d9f1b34fed21d7c88a008b8822f5dd4c7 (diff) | |
| download | linux-17470b7da11c137267c74ff0d2d4cca56f595c60.tar.xz | |
ARM: dts: add the CLCD LCD display to the NHK15
This adds the TPG110 TDO43MTEA2 24-bit RGB LCD panel and sets
up the Nomadik device tree to activate the CLCD and connect it
to this panel.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
| -rw-r--r-- | arch/arm/boot/dts/ste-nomadik-nhk15.dts | 44 | ||||
| -rw-r--r-- | arch/arm/boot/dts/ste-nomadik-stn8815.dtsi | 22 |
2 files changed, 66 insertions, 0 deletions
diff --git a/arch/arm/boot/dts/ste-nomadik-nhk15.dts b/arch/arm/boot/dts/ste-nomadik-nhk15.dts index 3ec5c65..1ec46a7 100644 --- a/arch/arm/boot/dts/ste-nomadik-nhk15.dts +++ b/arch/arm/boot/dts/ste-nomadik-nhk15.dts @@ -176,6 +176,50 @@ }; amba { + clcd@10120000 { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&clcd_24bit_mux>; + port { + nomadik_clcd_pads: endpoint { + remote-endpoint = <&nomadik_clcd_panel>; + arm,pl11x,tft-r0g0b0-pads = <16 8 0>; + }; + }; + + /* + * WVGA connector 21 + * WVGA (800x480): 4.3" TPG110 TDO43MTEA2 24-bit RGB + * with TPO touch screen. + */ + panel { + compatible = "tpo,tpg110", "panel-dpi"; + grestb-gpios = <&stmpe_gpio44 5 GPIO_ACTIVE_LOW>; + scen-gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; + scl-gpios = <&gpio0 5 GPIO_ACTIVE_HIGH>; + sda-gpios = <&gpio0 4 GPIO_ACTIVE_HIGH>; + backlight = <&bl>; + + port { + nomadik_clcd_panel: endpoint { + remote-endpoint = <&nomadik_clcd_pads>; + }; + }; + + panel-timing { + clock-frequency = <33200000>; + hactive = <800>; + hback-porch = <216>; + hfront-porch = <40>; + hsync-len = <1>; + vactive = <480>; + vback-porch = <35>; + vfront-porch = <10>; + vsync-len = <1>; + }; + }; + }; + /* Activate RX/TX and CTS/RTS on UART 0 */ uart0: uart@101fd000 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 80a3c9c..adb1c09 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -166,6 +166,18 @@ }; }; }; + clcd { + /* + * This should be activated to use the additional + * 8 lines for bits 16 thru 23 from the CLCD block. + */ + clcd_24bit_mux: clcd_mux { + clcd_24bit_mux { + function = "clcd"; + groups = "clcd_16_23_b_1"; + }; + }; + }; }; /* Power Management Unit */ @@ -732,6 +744,16 @@ #size-cells = <1>; ranges; + clcd@10120000 { + compatible = "arm,pl110", "arm,primecell"; + reg = <0x10120000 0x1000>; + interrupt-names = "combined"; + interrupts = <14>; + clocks = <&clcdclk>, <&hclkclcd>; + clock-names = "clcdclk", "apb_pclk"; + status = "disabled"; + }; + vica: intc@10140000 { compatible = "arm,versatile-vic"; interrupt-controller; |