summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorDavid S. Miller <davem@davemloft.net>2015-10-03 12:05:30 (GMT)
committerDavid S. Miller <davem@davemloft.net>2015-10-03 12:05:30 (GMT)
commit28117b08e55a70322389c4366751b35a2bb9d393 (patch)
tree10257e45f553f1b7590685756fbf1ca408385c09
parentf8e1100afc4f362e94c2d4a3231f16c77beb6d1b (diff)
parent22d4df8ff3a3cc7251671d129a7185c66a929ddc (diff)
downloadlinux-28117b08e55a70322389c4366751b35a2bb9d393.tar.xz
Merge branch 'ravb-r8a7795'
Simon Horman says: ==================== ravb: Add support for r8a7795 SoC please consider this series for net-next. It enhances the ravb driver to support the r8a7795 SoC. Changes: * Dropped RFC prefix * Details in changelog of individual patches Base: * net-next/master Availability: To aid review of this in conjunction with other EtherAVB changes the following branches are available in my renesas tree on kernel.org. * me/r8a7795-ravb-driver-v4: this series * me/r8a7795-ravb-pfc-v2: r8a7795 sh-pfc update for EthernetAVB * me/r8a7795-ravb-integration-v4: enable EthernetAVB on r8a7795 * me/r8a7795-ravb-driver-and-integration-v4.runtime: the above three branches with their runtime dependencies ==================== Signed-off-by: David S. Miller <davem@davemloft.net>
-rw-r--r--Documentation/devicetree/bindings/net/renesas,ravb.txt69
-rw-r--r--drivers/net/ethernet/renesas/ravb.h7
-rw-r--r--drivers/net/ethernet/renesas/ravb_main.c101
-rw-r--r--drivers/net/phy/phy_device.c59
-rw-r--r--include/linux/phy.h1
5 files changed, 184 insertions, 53 deletions
diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt
index 1fd8831..b486f3f 100644
--- a/Documentation/devicetree/bindings/net/renesas,ravb.txt
+++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt
@@ -6,8 +6,12 @@ interface contains.
Required properties:
- compatible: "renesas,etheravb-r8a7790" if the device is a part of R8A7790 SoC.
"renesas,etheravb-r8a7794" if the device is a part of R8A7794 SoC.
+ "renesas,etheravb-r8a7795" if the device is a part of R8A7795 SoC.
- reg: offset and length of (1) the register block and (2) the stream buffer.
-- interrupts: interrupt specifier for the sole interrupt.
+- interrupts: A list of interrupt-specifiers, one for each entry in
+ interrupt-names.
+ If interrupt-names is not present, an interrupt specifier
+ for a single muxed interrupt.
- phy-mode: see ethernet.txt file in the same directory.
- phy-handle: see ethernet.txt file in the same directory.
- #address-cells: number of address cells for the MDIO bus, must be equal to 1.
@@ -18,6 +22,12 @@ Required properties:
Optional properties:
- interrupt-parent: the phandle for the interrupt controller that services
interrupts for this device.
+- interrupt-names: A list of interrupt names.
+ For the R8A7795 SoC this property is mandatory;
+ it should include one entry per channel, named "ch%u",
+ where %u is the channel number ranging from 0 to 24.
+ For other SoCs this property is optional; if present
+ it should contain "mux" for a single muxed interrupt.
- pinctrl-names: pin configuration state name ("default").
- renesas,no-ether-link: boolean, specify when a board does not provide a proper
AVB_LINK signal.
@@ -27,13 +37,46 @@ Optional properties:
Example:
ethernet@e6800000 {
- compatible = "renesas,etheravb-r8a7790";
- reg = <0 0xe6800000 0 0x800>, <0 0xee0e8000 0 0x4000>;
+ compatible = "renesas,etheravb-r8a7795";
+ reg = <0 0xe6800000 0 0x800>, <0 0xe6a00000 0 0x10000>;
interrupt-parent = <&gic>;
- interrupts = <0 163 IRQ_TYPE_LEVEL_HIGH>;
- clocks = <&mstp8_clks R8A7790_CLK_ETHERAVB>;
- phy-mode = "rmii";
+ interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "ch0", "ch1", "ch2", "ch3",
+ "ch4", "ch5", "ch6", "ch7",
+ "ch8", "ch9", "ch10", "ch11",
+ "ch12", "ch13", "ch14", "ch15",
+ "ch16", "ch17", "ch18", "ch19",
+ "ch20", "ch21", "ch22", "ch23",
+ "ch24";
+ clocks = <&mstp8_clks R8A7795_CLK_ETHERAVB>;
+ power-domains = <&cpg_clocks>;
+ phy-mode = "rgmii-id";
phy-handle = <&phy0>;
+
pinctrl-0 = <&ether_pins>;
pinctrl-names = "default";
renesas,no-ether-link;
@@ -41,8 +84,20 @@ Example:
#size-cells = <0>;
phy0: ethernet-phy@0 {
+ rxc-skew-ps = <900>;
+ rxdv-skew-ps = <0>;
+ rxd0-skew-ps = <0>;
+ rxd1-skew-ps = <0>;
+ rxd2-skew-ps = <0>;
+ rxd3-skew-ps = <0>;
+ txc-skew-ps = <900>;
+ txen-skew-ps = <0>;
+ txd0-skew-ps = <0>;
+ txd1-skew-ps = <0>;
+ txd2-skew-ps = <0>;
+ txd3-skew-ps = <0>;
reg = <0>;
interrupt-parent = <&gpio2>;
- interrupts = <15 IRQ_TYPE_LEVEL_LOW>;
+ interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
};
};
diff --git a/drivers/net/ethernet/renesas/ravb.h b/drivers/net/ethernet/renesas/ravb.h
index a157aaa..0623fff9 100644
--- a/drivers/net/ethernet/renesas/ravb.h
+++ b/drivers/net/ethernet/renesas/ravb.h
@@ -766,6 +766,11 @@ struct ravb_ptp {
struct ravb_ptp_perout perout[N_PER_OUT];
};
+enum ravb_chip_id {
+ RCAR_GEN2,
+ RCAR_GEN3,
+};
+
struct ravb_private {
struct net_device *ndev;
struct platform_device *pdev;
@@ -806,6 +811,8 @@ struct ravb_private {
int msg_enable;
int speed;
int duplex;
+ int emac_irq;
+ enum ravb_chip_id chip_id;
unsigned no_avb_link:1;
unsigned avb_link_active_low:1;
diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c
index 450899e..8cc5ec5 100644
--- a/drivers/net/ethernet/renesas/ravb_main.c
+++ b/drivers/net/ethernet/renesas/ravb_main.c
@@ -201,7 +201,7 @@ static void ravb_ring_free(struct net_device *ndev, int q)
if (priv->rx_ring[q]) {
ring_size = sizeof(struct ravb_ex_rx_desc) *
(priv->num_rx_ring[q] + 1);
- dma_free_coherent(NULL, ring_size, priv->rx_ring[q],
+ dma_free_coherent(ndev->dev.parent, ring_size, priv->rx_ring[q],
priv->rx_desc_dma[q]);
priv->rx_ring[q] = NULL;
}
@@ -209,7 +209,7 @@ static void ravb_ring_free(struct net_device *ndev, int q)
if (priv->tx_ring[q]) {
ring_size = sizeof(struct ravb_tx_desc) *
(priv->num_tx_ring[q] * NUM_TX_DESC + 1);
- dma_free_coherent(NULL, ring_size, priv->tx_ring[q],
+ dma_free_coherent(ndev->dev.parent, ring_size, priv->tx_ring[q],
priv->tx_desc_dma[q]);
priv->tx_ring[q] = NULL;
}
@@ -240,13 +240,13 @@ static void ravb_ring_format(struct net_device *ndev, int q)
rx_desc = &priv->rx_ring[q][i];
/* The size of the buffer should be on 16-byte boundary. */
rx_desc->ds_cc = cpu_to_le16(ALIGN(PKT_BUF_SZ, 16));
- dma_addr = dma_map_single(&ndev->dev, priv->rx_skb[q][i]->data,
+ dma_addr = dma_map_single(ndev->dev.parent, priv->rx_skb[q][i]->data,
ALIGN(PKT_BUF_SZ, 16),
DMA_FROM_DEVICE);
/* We just set the data size to 0 for a failed mapping which
* should prevent DMA from happening...
*/
- if (dma_mapping_error(&ndev->dev, dma_addr))
+ if (dma_mapping_error(ndev->dev.parent, dma_addr))
rx_desc->ds_cc = cpu_to_le16(0);
rx_desc->dptr = cpu_to_le32(dma_addr);
rx_desc->die_dt = DT_FEMPTY;
@@ -309,7 +309,7 @@ static int ravb_ring_init(struct net_device *ndev, int q)
/* Allocate all RX descriptors. */
ring_size = sizeof(struct ravb_ex_rx_desc) * (priv->num_rx_ring[q] + 1);
- priv->rx_ring[q] = dma_alloc_coherent(NULL, ring_size,
+ priv->rx_ring[q] = dma_alloc_coherent(ndev->dev.parent, ring_size,
&priv->rx_desc_dma[q],
GFP_KERNEL);
if (!priv->rx_ring[q])
@@ -320,7 +320,7 @@ static int ravb_ring_init(struct net_device *ndev, int q)
/* Allocate all TX descriptors. */
ring_size = sizeof(struct ravb_tx_desc) *
(priv->num_tx_ring[q] * NUM_TX_DESC + 1);
- priv->tx_ring[q] = dma_alloc_coherent(NULL, ring_size,
+ priv->tx_ring[q] = dma_alloc_coherent(ndev->dev.parent, ring_size,
&priv->tx_desc_dma[q],
GFP_KERNEL);
if (!priv->tx_ring[q])
@@ -443,7 +443,7 @@ static int ravb_tx_free(struct net_device *ndev, int q)
size = le16_to_cpu(desc->ds_tagl) & TX_DS;
/* Free the original skb. */
if (priv->tx_skb[q][entry / NUM_TX_DESC]) {
- dma_unmap_single(&ndev->dev, le32_to_cpu(desc->dptr),
+ dma_unmap_single(ndev->dev.parent, le32_to_cpu(desc->dptr),
size, DMA_TO_DEVICE);
/* Last packet descriptor? */
if (entry % NUM_TX_DESC == NUM_TX_DESC - 1) {
@@ -546,7 +546,7 @@ static bool ravb_rx(struct net_device *ndev, int *quota, int q)
skb = priv->rx_skb[q][entry];
priv->rx_skb[q][entry] = NULL;
- dma_unmap_single(&ndev->dev, le32_to_cpu(desc->dptr),
+ dma_unmap_single(ndev->dev.parent, le32_to_cpu(desc->dptr),
ALIGN(PKT_BUF_SZ, 16),
DMA_FROM_DEVICE);
get_ts &= (q == RAVB_NC) ?
@@ -586,14 +586,14 @@ static bool ravb_rx(struct net_device *ndev, int *quota, int q)
if (!skb)
break; /* Better luck next round. */
ravb_set_buffer_align(skb);
- dma_addr = dma_map_single(&ndev->dev, skb->data,
+ dma_addr = dma_map_single(ndev->dev.parent, skb->data,
le16_to_cpu(desc->ds_cc),
DMA_FROM_DEVICE);
skb_checksum_none_assert(skb);
/* We just set the data size to 0 for a failed mapping
* which should prevent DMA from happening...
*/
- if (dma_mapping_error(&ndev->dev, dma_addr))
+ if (dma_mapping_error(ndev->dev.parent, dma_addr))
desc->ds_cc = cpu_to_le16(0);
desc->dptr = cpu_to_le32(dma_addr);
priv->rx_skb[q][entry] = skb;
@@ -889,6 +889,22 @@ static int ravb_phy_init(struct net_device *ndev)
return -ENOENT;
}
+ /* This driver only support 10/100Mbit speeds on Gen3
+ * at this time.
+ */
+ if (priv->chip_id == RCAR_GEN3) {
+ int err;
+
+ err = phy_set_max_speed(phydev, SPEED_100);
+ if (err) {
+ netdev_err(ndev, "failed to limit PHY to 100Mbit/s\n");
+ phy_disconnect(phydev);
+ return err;
+ }
+
+ netdev_info(ndev, "limited PHY to 100Mbit/s\n");
+ }
+
netdev_info(ndev, "attached PHY %d (IRQ %d) to driver %s\n",
phydev->addr, phydev->irq, phydev->drv->name);
@@ -1197,6 +1213,15 @@ static int ravb_open(struct net_device *ndev)
goto out_napi_off;
}
+ if (priv->chip_id == RCAR_GEN3) {
+ error = request_irq(priv->emac_irq, ravb_interrupt,
+ IRQF_SHARED, ndev->name, ndev);
+ if (error) {
+ netdev_err(ndev, "cannot request IRQ\n");
+ goto out_free_irq;
+ }
+ }
+
/* Device init */
error = ravb_dmac_init(ndev);
if (error)
@@ -1220,6 +1245,7 @@ out_ptp_stop:
ravb_ptp_stop(ndev);
out_free_irq:
free_irq(ndev->irq, ndev);
+ free_irq(priv->emac_irq, ndev);
out_napi_off:
napi_disable(&priv->napi[RAVB_NC]);
napi_disable(&priv->napi[RAVB_BE]);
@@ -1300,8 +1326,8 @@ static netdev_tx_t ravb_start_xmit(struct sk_buff *skb, struct net_device *ndev)
entry / NUM_TX_DESC * DPTR_ALIGN;
len = PTR_ALIGN(skb->data, DPTR_ALIGN) - skb->data;
memcpy(buffer, skb->data, len);
- dma_addr = dma_map_single(&ndev->dev, buffer, len, DMA_TO_DEVICE);
- if (dma_mapping_error(&ndev->dev, dma_addr))
+ dma_addr = dma_map_single(ndev->dev.parent, buffer, len, DMA_TO_DEVICE);
+ if (dma_mapping_error(ndev->dev.parent, dma_addr))
goto drop;
desc = &priv->tx_ring[q][entry];
@@ -1310,8 +1336,8 @@ static netdev_tx_t ravb_start_xmit(struct sk_buff *skb, struct net_device *ndev)
buffer = skb->data + len;
len = skb->len - len;
- dma_addr = dma_map_single(&ndev->dev, buffer, len, DMA_TO_DEVICE);
- if (dma_mapping_error(&ndev->dev, dma_addr))
+ dma_addr = dma_map_single(ndev->dev.parent, buffer, len, DMA_TO_DEVICE);
+ if (dma_mapping_error(ndev->dev.parent, dma_addr))
goto unmap;
desc++;
@@ -1323,7 +1349,7 @@ static netdev_tx_t ravb_start_xmit(struct sk_buff *skb, struct net_device *ndev)
ts_skb = kmalloc(sizeof(*ts_skb), GFP_ATOMIC);
if (!ts_skb) {
desc--;
- dma_unmap_single(&ndev->dev, dma_addr, len,
+ dma_unmap_single(ndev->dev.parent, dma_addr, len,
DMA_TO_DEVICE);
goto unmap;
}
@@ -1358,7 +1384,7 @@ exit:
return NETDEV_TX_OK;
unmap:
- dma_unmap_single(&ndev->dev, le32_to_cpu(desc->dptr),
+ dma_unmap_single(ndev->dev.parent, le32_to_cpu(desc->dptr),
le16_to_cpu(desc->ds_tagl), DMA_TO_DEVICE);
drop:
dev_kfree_skb_any(skb);
@@ -1625,10 +1651,20 @@ static int ravb_mdio_release(struct ravb_private *priv)
return 0;
}
+static const struct of_device_id ravb_match_table[] = {
+ { .compatible = "renesas,etheravb-r8a7790", .data = (void *)RCAR_GEN2 },
+ { .compatible = "renesas,etheravb-r8a7794", .data = (void *)RCAR_GEN2 },
+ { .compatible = "renesas,etheravb-r8a7795", .data = (void *)RCAR_GEN3 },
+ { }
+};
+MODULE_DEVICE_TABLE(of, ravb_match_table);
+
static int ravb_probe(struct platform_device *pdev)
{
struct device_node *np = pdev->dev.of_node;
+ const struct of_device_id *match;
struct ravb_private *priv;
+ enum ravb_chip_id chip_id;
struct net_device *ndev;
int error, irq, q;
struct resource *res;
@@ -1657,7 +1693,14 @@ static int ravb_probe(struct platform_device *pdev)
/* The Ether-specific entries in the device structure. */
ndev->base_addr = res->start;
ndev->dma = -1;
- irq = platform_get_irq(pdev, 0);
+
+ match = of_match_device(of_match_ptr(ravb_match_table), &pdev->dev);
+ chip_id = (enum ravb_chip_id)match->data;
+
+ if (chip_id == RCAR_GEN3)
+ irq = platform_get_irq_byname(pdev, "ch22");
+ else
+ irq = platform_get_irq(pdev, 0);
if (irq < 0) {
error = irq;
goto out_release;
@@ -1688,6 +1731,17 @@ static int ravb_probe(struct platform_device *pdev)
priv->avb_link_active_low =
of_property_read_bool(np, "renesas,ether-link-active-low");
+ if (chip_id == RCAR_GEN3) {
+ irq = platform_get_irq_byname(pdev, "ch24");
+ if (irq < 0) {
+ error = irq;
+ goto out_release;
+ }
+ priv->emac_irq = irq;
+ }
+
+ priv->chip_id = chip_id;
+
/* Set function */
ndev->netdev_ops = &ravb_netdev_ops;
ndev->ethtool_ops = &ravb_ethtool_ops;
@@ -1708,7 +1762,7 @@ static int ravb_probe(struct platform_device *pdev)
/* Allocate descriptor base address table */
priv->desc_bat_size = sizeof(struct ravb_desc) * DBAT_ENTRY_NUM;
- priv->desc_bat = dma_alloc_coherent(NULL, priv->desc_bat_size,
+ priv->desc_bat = dma_alloc_coherent(ndev->dev.parent, priv->desc_bat_size,
&priv->desc_bat_dma, GFP_KERNEL);
if (!priv->desc_bat) {
dev_err(&ndev->dev,
@@ -1763,7 +1817,7 @@ out_napi_del:
netif_napi_del(&priv->napi[RAVB_BE]);
ravb_mdio_release(priv);
out_dma_free:
- dma_free_coherent(NULL, priv->desc_bat_size, priv->desc_bat,
+ dma_free_coherent(ndev->dev.parent, priv->desc_bat_size, priv->desc_bat,
priv->desc_bat_dma);
out_release:
if (ndev)
@@ -1779,7 +1833,7 @@ static int ravb_remove(struct platform_device *pdev)
struct net_device *ndev = platform_get_drvdata(pdev);
struct ravb_private *priv = netdev_priv(ndev);
- dma_free_coherent(NULL, priv->desc_bat_size, priv->desc_bat,
+ dma_free_coherent(ndev->dev.parent, priv->desc_bat_size, priv->desc_bat,
priv->desc_bat_dma);
/* Set reset mode */
ravb_write(ndev, CCC_OPC_RESET, CCC);
@@ -1818,13 +1872,6 @@ static const struct dev_pm_ops ravb_dev_pm_ops = {
#define RAVB_PM_OPS NULL
#endif
-static const struct of_device_id ravb_match_table[] = {
- { .compatible = "renesas,etheravb-r8a7790" },
- { .compatible = "renesas,etheravb-r8a7794" },
- { }
-};
-MODULE_DEVICE_TABLE(of, ravb_match_table);
-
static struct platform_driver ravb_driver = {
.probe = ravb_probe,
.remove = ravb_remove,
diff --git a/drivers/net/phy/phy_device.c b/drivers/net/phy/phy_device.c
index f761288..3833891 100644
--- a/drivers/net/phy/phy_device.c
+++ b/drivers/net/phy/phy_device.c
@@ -1239,6 +1239,44 @@ static int gen10g_resume(struct phy_device *phydev)
return 0;
}
+static int __set_phy_supported(struct phy_device *phydev, u32 max_speed)
+{
+ /* The default values for phydev->supported are provided by the PHY
+ * driver "features" member, we want to reset to sane defaults first
+ * before supporting higher speeds.
+ */
+ phydev->supported &= PHY_DEFAULT_FEATURES;
+
+ switch (max_speed) {
+ default:
+ return -ENOTSUPP;
+ case SPEED_1000:
+ phydev->supported |= PHY_1000BT_FEATURES;
+ /* fall through */
+ case SPEED_100:
+ phydev->supported |= PHY_100BT_FEATURES;
+ /* fall through */
+ case SPEED_10:
+ phydev->supported |= PHY_10BT_FEATURES;
+ }
+
+ return 0;
+}
+
+int phy_set_max_speed(struct phy_device *phydev, u32 max_speed)
+{
+ int err;
+
+ err = __set_phy_supported(phydev, max_speed);
+ if (err)
+ return err;
+
+ phydev->advertising = phydev->supported;
+
+ return 0;
+}
+EXPORT_SYMBOL(phy_set_max_speed);
+
static void of_set_phy_supported(struct phy_device *phydev)
{
struct device_node *node = phydev->dev.of_node;
@@ -1250,25 +1288,8 @@ static void of_set_phy_supported(struct phy_device *phydev)
if (!node)
return;
- if (!of_property_read_u32(node, "max-speed", &max_speed)) {
- /* The default values for phydev->supported are provided by the PHY
- * driver "features" member, we want to reset to sane defaults fist
- * before supporting higher speeds.
- */
- phydev->supported &= PHY_DEFAULT_FEATURES;
-
- switch (max_speed) {
- default:
- return;
-
- case SPEED_1000:
- phydev->supported |= PHY_1000BT_FEATURES;
- case SPEED_100:
- phydev->supported |= PHY_100BT_FEATURES;
- case SPEED_10:
- phydev->supported |= PHY_10BT_FEATURES;
- }
- }
+ if (!of_property_read_u32(node, "max-speed", &max_speed))
+ __set_phy_supported(phydev, max_speed);
}
/**
diff --git a/include/linux/phy.h b/include/linux/phy.h
index 4a4e3a0..4c477e6 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -798,6 +798,7 @@ int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd);
int phy_start_interrupts(struct phy_device *phydev);
void phy_print_status(struct phy_device *phydev);
void phy_device_free(struct phy_device *phydev);
+int phy_set_max_speed(struct phy_device *phydev, u32 max_speed);
int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
int (*run)(struct phy_device *));