Merge remote-tracking branch 'spi/topic/atmel' into spi-next

11 files changed, 71 insertions, 73 deletions

diff --git a/drivers/spi/spi-atmel.c b/drivers/spi/spi-atmel.c
index d4ac60b..273db0b 100644
--- a/drivers/spi/spi-atmel.c
+++ b/drivers/spi/spi-atmel.c
@@ -170,18 +170,18 @@
 /* Bit manipulation macros */
 #define SPI_BIT(name) \
 	(1 << SPI_##name##_OFFSET)
-#define SPI_BF(name,value) \
+#define SPI_BF(name, value) \
 	(((value) & ((1 << SPI_##name##_SIZE) - 1)) << SPI_##name##_OFFSET)
-#define SPI_BFEXT(name,value) \
+#define SPI_BFEXT(name, value) \
 	(((value) >> SPI_##name##_OFFSET) & ((1 << SPI_##name##_SIZE) - 1))
-#define SPI_BFINS(name,value,old) \
-	( ((old) & ~(((1 << SPI_##name##_SIZE) - 1) << SPI_##name##_OFFSET)) \
-	  | SPI_BF(name,value))
+#define SPI_BFINS(name, value, old) \
+	(((old) & ~(((1 << SPI_##name##_SIZE) - 1) << SPI_##name##_OFFSET)) \
+	  | SPI_BF(name, value))
 
 /* Register access macros */
-#define spi_readl(port,reg) \
+#define spi_readl(port, reg) \
 	__raw_readl((port)->regs + SPI_##reg)
-#define spi_writel(port,reg,value) \
+#define spi_writel(port, reg, value) \
 	__raw_writel((value), (port)->regs + SPI_##reg)
 
 /* use PIO for small transfers, avoiding DMA setup/teardown overhead and
@@ -1401,8 +1401,8 @@ static int atmel_spi_transfer(struct spi_device *spi, struct spi_message *msg)
 			asd = spi->controller_state;
 			bits = (asd->csr >> 4) & 0xf;
 			if (bits != xfer->bits_per_word - 8) {
-				dev_dbg(&spi->dev, "you can't yet change "
-					 "bits_per_word in transfers\n");
+				dev_dbg(&spi->dev,
+					"you can't yet change bits_per_word in transfers\n");
 				return -ENOPROTOOPT;
 			}
 		}
@@ -1516,7 +1516,7 @@ static int atmel_spi_probe(struct platform_device *pdev)
 
 	/* setup spi core then atmel-specific driver state */
 	ret = -ENOMEM;
-	master = spi_alloc_master(&pdev->dev, sizeof *as);
+	master = spi_alloc_master(&pdev->dev, sizeof(*as));
 	if (!master)
 		goto out_free;
 
@@ -1546,9 +1546,11 @@ static int atmel_spi_probe(struct platform_device *pdev)
 	INIT_LIST_HEAD(&as->queue);
 
 	as->pdev = pdev;
-	as->regs = ioremap(regs->start, resource_size(regs));
-	if (!as->regs)
+	as->regs = devm_ioremap_resource(&pdev->dev, regs);
+	if (IS_ERR(as->regs)) {
+		ret = PTR_ERR(as->regs);
 		goto out_free_buffer;
+	}
 	as->phybase = regs->start;
 	as->irq = irq;
 	as->clk = clk;
@@ -1617,7 +1619,6 @@ out_free_dma:
 out_free_irq:
 	free_irq(irq, master);
 out_unmap_regs:
-	iounmap(as->regs);
 out_free_buffer:
 	if (!as->use_pdc)
 		tasklet_kill(&as->tasklet);
@@ -1669,36 +1670,36 @@ static int atmel_spi_remove(struct platform_device *pdev)
 	clk_disable_unprepare(as->clk);
 	clk_put(as->clk);
 	free_irq(as->irq, master);
-	iounmap(as->regs);
 
 	spi_unregister_master(master);
 
 	return 0;
 }
 
-#ifdef	CONFIG_PM
-
-static int atmel_spi_suspend(struct platform_device *pdev, pm_message_t mesg)
+#ifdef CONFIG_PM_SLEEP
+static int atmel_spi_suspend(struct device *dev)
 {
-	struct spi_master	*master = platform_get_drvdata(pdev);
+	struct spi_master	*master = dev_get_drvdata(dev);
 	struct atmel_spi	*as = spi_master_get_devdata(master);
 
 	clk_disable_unprepare(as->clk);
 	return 0;
 }
 
-static int atmel_spi_resume(struct platform_device *pdev)
+static int atmel_spi_resume(struct device *dev)
 {
-	struct spi_master	*master = platform_get_drvdata(pdev);
+	struct spi_master	*master = dev_get_drvdata(dev);
 	struct atmel_spi	*as = spi_master_get_devdata(master);
 
-	return clk_prepare_enable(as->clk);
+	clk_prepare_enable(as->clk);
 	return 0;
 }
 
+static SIMPLE_DEV_PM_OPS(atmel_spi_pm_ops, atmel_spi_suspend, atmel_spi_resume);
+
+#define ATMEL_SPI_PM_OPS	(&atmel_spi_pm_ops)
 #else
-#define	atmel_spi_suspend	NULL
-#define	atmel_spi_resume	NULL
+#define ATMEL_SPI_PM_OPS	NULL
 #endif
 
 #if defined(CONFIG_OF)
@@ -1714,10 +1715,9 @@ static struct platform_driver atmel_spi_driver = {
 	.driver		= {
 		.name	= "atmel_spi",
 		.owner	= THIS_MODULE,
+		.pm	= ATMEL_SPI_PM_OPS,
 		.of_match_table	= of_match_ptr(atmel_spi_dt_ids),
 	},
-	.suspend	= atmel_spi_suspend,
-	.resume		= atmel_spi_resume,
 	.probe		= atmel_spi_probe,
 	.remove		= atmel_spi_remove,
 };
diff --git a/drivers/spi/spi-bfin-sport.c b/drivers/spi/spi-bfin-sport.c
index 91921b5..7b2cda0 100644
--- a/drivers/spi/spi-bfin-sport.c
+++ b/drivers/spi/spi-bfin-sport.c
@@ -592,7 +592,7 @@ bfin_sport_spi_setup(struct spi_device *spi)
 			 */
 			if (chip_info->ctl_reg || chip_info->enable_dma) {
 				ret = -EINVAL;
-				dev_err(&spi->dev, "don't set ctl_reg/enable_dma fields");
+				dev_err(&spi->dev, "don't set ctl_reg/enable_dma fields\n");
 				goto error;
 			}
 			chip->cs_chg_udelay = chip_info->cs_chg_udelay;
diff --git a/drivers/spi/spi-bfin5xx.c b/drivers/spi/spi-bfin5xx.c
index 45bdf73..b70a2bd 100644
--- a/drivers/spi/spi-bfin5xx.c
+++ b/drivers/spi/spi-bfin5xx.c
@@ -524,7 +524,7 @@ static irqreturn_t bfin_spi_dma_irq_handler(int irq, void *dev_id)
 	timeout = jiffies + HZ;
 	while (!(bfin_read(&drv_data->regs->stat) & BIT_STAT_SPIF))
 		if (!time_before(jiffies, timeout)) {
-			dev_warn(&drv_data->pdev->dev, "timeout waiting for SPIF");
+			dev_warn(&drv_data->pdev->dev, "timeout waiting for SPIF\n");
 			break;
 		} else
 			cpu_relax();
@@ -913,8 +913,9 @@ static void bfin_spi_pump_messages(struct work_struct *work)
 	drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
 					    struct spi_transfer, transfer_list);
 
-	dev_dbg(&drv_data->pdev->dev, "got a message to pump, "
-		"state is set to: baud %d, flag 0x%x, ctl 0x%x\n",
+	dev_dbg(&drv_data->pdev->dev,
+		"got a message to pump, state is set to: baud "
+		"%d, flag 0x%x, ctl 0x%x\n",
 		drv_data->cur_chip->baud, drv_data->cur_chip->flag,
 		drv_data->cur_chip->ctl_reg);
 
@@ -1013,8 +1014,8 @@ static int bfin_spi_setup(struct spi_device *spi)
 		 * but let's assume (for now) they do.
 		 */
 		if (chip_info->ctl_reg & ~bfin_ctl_reg) {
-			dev_err(&spi->dev, "do not set bits in ctl_reg "
-				"that the SPI framework manages\n");
+			dev_err(&spi->dev,
+				"do not set bits in ctl_reg that the SPI framework manages\n");
 			goto error;
 		}
 		chip->enable_dma = chip_info->enable_dma != 0
@@ -1050,17 +1051,17 @@ static int bfin_spi_setup(struct spi_device *spi)
 	chip->chip_select_num = spi->chip_select;
 	if (chip->chip_select_num < MAX_CTRL_CS) {
 		if (!(spi->mode & SPI_CPHA))
-			dev_warn(&spi->dev, "Warning: SPI CPHA not set:"
-				" Slave Select not under software control!\n"
-				" See Documentation/blackfin/bfin-spi-notes.txt");
+			dev_warn(&spi->dev,
+				"Warning: SPI CPHA not set: Slave Select not under software control!\n"
+				"See Documentation/blackfin/bfin-spi-notes.txt\n");
 
 		chip->flag = (1 << spi->chip_select) << 8;
 	} else
 		chip->cs_gpio = chip->chip_select_num - MAX_CTRL_CS;
 
 	if (chip->enable_dma && chip->pio_interrupt) {
-		dev_err(&spi->dev, "enable_dma is set, "
-				"do not set pio_interrupt\n");
+		dev_err(&spi->dev,
+			"enable_dma is set, do not set pio_interrupt\n");
 		goto error;
 	}
 	/*
diff --git a/drivers/spi/spi-dw.c b/drivers/spi/spi-dw.c
index 79c958e..b897c4ad 100644
--- a/drivers/spi/spi-dw.c
+++ b/drivers/spi/spi-dw.c
@@ -870,8 +870,8 @@ void dw_spi_remove_host(struct dw_spi *dws)
 	/* Remove the queue */
 	status = destroy_queue(dws);
 	if (status != 0)
-		dev_err(&dws->master->dev, "dw_spi_remove: workqueue will not "
-			"complete, message memory not freed\n");
+		dev_err(&dws->master->dev,
+			"dw_spi_remove: workqueue will not complete, message memory not freed\n");
 
 	if (dws->dma_ops && dws->dma_ops->dma_exit)
 		dws->dma_ops->dma_exit(dws);
diff --git a/drivers/spi/spi-ep93xx.c b/drivers/spi/spi-ep93xx.c
index d22c00a..b57a341 100644
--- a/drivers/spi/spi-ep93xx.c
+++ b/drivers/spi/spi-ep93xx.c
@@ -330,7 +330,7 @@ static int ep93xx_spi_chip_setup(const struct ep93xx_spi *espi,
 
 	dev_dbg(&espi->pdev->dev, "setup: mode %d, cpsr %d, scr %d, dss %d\n",
 		chip->spi->mode, div_cpsr, div_scr, dss);
-	dev_dbg(&espi->pdev->dev, "setup: cr0 %#x", cr0);
+	dev_dbg(&espi->pdev->dev, "setup: cr0 %#x\n", cr0);
 
 	ep93xx_spi_write_u8(espi, SSPCPSR, div_cpsr);
 	ep93xx_spi_write_u16(espi, SSPCR0, cr0);
@@ -509,7 +509,7 @@ ep93xx_spi_dma_prepare(struct ep93xx_spi *espi, enum dma_transfer_direction dir)
 	}
 
 	if (WARN_ON(len)) {
-		dev_warn(&espi->pdev->dev, "len = %zu expected 0!", len);
+		dev_warn(&espi->pdev->dev, "len = %zu expected 0!\n", len);
 		return ERR_PTR(-EINVAL);
 	}
 
diff --git a/drivers/spi/spi-fsl-cpm.c b/drivers/spi/spi-fsl-cpm.c
index 07971e3..58630ed 100644
--- a/drivers/spi/spi-fsl-cpm.c
+++ b/drivers/spi/spi-fsl-cpm.c
@@ -299,7 +299,7 @@ int fsl_spi_cpm_init(struct mpc8xxx_spi *mspi)
 
 		switch (mspi->subblock) {
 		default:
-			dev_warn(dev, "cell-index unspecified, assuming SPI1");
+			dev_warn(dev, "cell-index unspecified, assuming SPI1\n");
 			/* fall through */
 		case 0:
 			mspi->subblock = QE_CR_SUBBLOCK_SPI1;
diff --git a/drivers/spi/spi-fsl-espi.c b/drivers/spi/spi-fsl-espi.c
index b8f1103..43222d7 100644
--- a/drivers/spi/spi-fsl-espi.c
+++ b/drivers/spi/spi-fsl-espi.c
@@ -289,8 +289,8 @@ static void fsl_espi_do_trans(struct spi_message *m,
 		if ((first->bits_per_word != t->bits_per_word) ||
 			(first->speed_hz != t->speed_hz)) {
 			espi_trans->status = -EINVAL;
-			dev_err(mspi->dev, "bits_per_word/speed_hz should be"
-					" same for the same SPI transfer\n");
+			dev_err(mspi->dev,
+				"bits_per_word/speed_hz should be same for the same SPI transfer\n");
 			return;
 		}
 
diff --git a/drivers/spi/spi-mpc52xx-psc.c b/drivers/spi/spi-mpc52xx-psc.c
index 6e925dc..00ba910 100644
--- a/drivers/spi/spi-mpc52xx-psc.c
+++ b/drivers/spi/spi-mpc52xx-psc.c
@@ -383,8 +383,8 @@ static int mpc52xx_psc_spi_do_probe(struct device *dev, u32 regaddr,
 
 	mps->irq = irq;
 	if (pdata == NULL) {
-		dev_warn(dev, "probe called without platform data, no "
-				"cs_control function will be called\n");
+		dev_warn(dev,
+			 "probe called without platform data, no cs_control function will be called\n");
 		mps->cs_control = NULL;
 		mps->sysclk = 0;
 		master->bus_num = bus_num;
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 32dca0c..c4e4868 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -504,7 +504,7 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer,
 				((u32 *)xfer->rx_buf)[elements++] = w;
 		} else {
 			int bytes_per_word = mcspi_bytes_per_word(word_len);
-			dev_err(&spi->dev, "DMA RX penultimate word empty");
+			dev_err(&spi->dev, "DMA RX penultimate word empty\n");
 			count -= (bytes_per_word << 1);
 			omap2_mcspi_set_enable(spi, 1);
 			return count;
@@ -522,7 +522,7 @@ omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer,
 		else /* word_len <= 32 */
 			((u32 *)xfer->rx_buf)[elements] = w;
 	} else {
-		dev_err(&spi->dev, "DMA RX last word empty");
+		dev_err(&spi->dev, "DMA RX last word empty\n");
 		count -= mcspi_bytes_per_word(word_len);
 	}
 	omap2_mcspi_set_enable(spi, 1);
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index c1a5067..64e1682 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -573,8 +573,8 @@ static irqreturn_t ssp_int(int irq, void *dev_id)
 			write_SSTO(0, reg);
 		write_SSSR_CS(drv_data, drv_data->clear_sr);
 
-		dev_err(&drv_data->pdev->dev, "bad message state "
-			"in interrupt handler\n");
+		dev_err(&drv_data->pdev->dev,
+			"bad message state in interrupt handler\n");
 
 		/* Never fail */
 		return IRQ_HANDLED;
@@ -651,8 +651,8 @@ static void pump_transfers(unsigned long data)
 		if (message->is_dma_mapped
 				|| transfer->rx_dma || transfer->tx_dma) {
 			dev_err(&drv_data->pdev->dev,
-				"pump_transfers: mapped transfer length "
-				"of %u is greater than %d\n",
+				"pump_transfers: mapped transfer length of "
+				"%u is greater than %d\n",
 				transfer->len, MAX_DMA_LEN);
 			message->status = -EINVAL;
 			giveback(drv_data);
@@ -660,11 +660,10 @@ static void pump_transfers(unsigned long data)
 		}
 
 		/* warn ... we force this to PIO mode */
-		if (printk_ratelimit())
-			dev_warn(&message->spi->dev, "pump_transfers: "
-				"DMA disabled for transfer length %ld "
-				"greater than %d\n",
-				(long)drv_data->len, MAX_DMA_LEN);
+		dev_warn_ratelimited(&message->spi->dev,
+				     "pump_transfers: DMA disabled for transfer length %ld "
+				     "greater than %d\n",
+				     (long)drv_data->len, MAX_DMA_LEN);
 	}
 
 	/* Setup the transfer state based on the type of transfer */
@@ -726,11 +725,8 @@ static void pump_transfers(unsigned long data)
 							message->spi,
 							bits, &dma_burst,
 							&dma_thresh))
-				if (printk_ratelimit())
-					dev_warn(&message->spi->dev,
-						"pump_transfers: "
-						"DMA burst size reduced to "
-						"match bits_per_word\n");
+				dev_warn_ratelimited(&message->spi->dev,
+						     "pump_transfers: DMA burst size reduced to match bits_per_word\n");
 		}
 
 		cr0 = clk_div
@@ -854,8 +850,8 @@ static int setup_cs(struct spi_device *spi, struct chip_data *chip,
 	if (gpio_is_valid(chip_info->gpio_cs)) {
 		err = gpio_request(chip_info->gpio_cs, "SPI_CS");
 		if (err) {
-			dev_err(&spi->dev, "failed to request chip select "
-					"GPIO%d\n", chip_info->gpio_cs);
+			dev_err(&spi->dev, "failed to request chip select GPIO%d\n",
+				chip_info->gpio_cs);
 			return err;
 		}
 
@@ -899,8 +895,8 @@ static int setup(struct spi_device *spi)
 
 		if (drv_data->ssp_type == CE4100_SSP) {
 			if (spi->chip_select > 4) {
-				dev_err(&spi->dev, "failed setup: "
-				"cs number must not be > 4.\n");
+				dev_err(&spi->dev,
+					"failed setup: cs number must not be > 4.\n");
 				kfree(chip);
 				return -EINVAL;
 			}
@@ -956,8 +952,8 @@ static int setup(struct spi_device *spi)
 						spi->bits_per_word,
 						&chip->dma_burst_size,
 						&chip->dma_threshold)) {
-			dev_warn(&spi->dev, "in setup: DMA burst size reduced "
-					"to match bits_per_word\n");
+			dev_warn(&spi->dev,
+				 "in setup: DMA burst size reduced to match bits_per_word\n");
 		}
 	}
 
diff --git a/drivers/spi/spi-topcliff-pch.c b/drivers/spi/spi-topcliff-pch.c
index eaeeed5..14843ef 100644
--- a/drivers/spi/spi-topcliff-pch.c
+++ b/drivers/spi/spi-topcliff-pch.c
@@ -506,8 +506,8 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg)
 		goto err_out;
 	}
 
-	dev_dbg(&pspi->dev, "%s Transfer List not empty. "
-		"Transfer Speed is set.\n", __func__);
+	dev_dbg(&pspi->dev,
+		"%s Transfer List not empty. Transfer Speed is set.\n", __func__);
 
 	spin_lock_irqsave(&data->lock, flags);
 	/* validate Tx/Rx buffers and Transfer length */
@@ -526,8 +526,9 @@ static int pch_spi_transfer(struct spi_device *pspi, struct spi_message *pmsg)
 			goto err_return_spinlock;
 		}
 
-		dev_dbg(&pspi->dev, "%s Tx/Rx buffer valid. Transfer length"
-			" valid\n", __func__);
+		dev_dbg(&pspi->dev,
+			"%s Tx/Rx buffer valid. Transfer length valid\n",
+			__func__);
 
 		/* if baud rate has been specified validate the same */
 		if (transfer->speed_hz > PCH_MAX_BAUDRATE)
@@ -1181,8 +1182,8 @@ static void pch_spi_process_messages(struct work_struct *pwork)
 	spin_lock(&data->lock);
 	/* check if suspend has been initiated;if yes flush queue */
 	if (data->board_dat->suspend_sts || (data->status == STATUS_EXITING)) {
-		dev_dbg(&data->master->dev, "%s suspend/remove initiated,"
-			"flushing queue\n", __func__);
+		dev_dbg(&data->master->dev,
+			"%s suspend/remove initiated, flushing queue\n", __func__);
 		list_for_each_entry_safe(pmsg, tmp, data->queue.next, queue) {
 			pmsg->status = -EIO;