diff options
author | Ivan T. Ivanov <ivan.ivanov@linaro.org> | 2015-04-09 08:34:33 (GMT) |
---|---|---|
committer | Felipe Balbi <balbi@ti.com> | 2015-04-28 16:49:15 (GMT) |
commit | 44e42ae3a398b559c768b9b3c324d72b0b0b4479 (patch) | |
tree | 807a641fd57e3624e0b01fdb86b8968e8193df33 | |
parent | 591fc116f3302da915bb57d4474a61a5e8884cec (diff) | |
download | linux-44e42ae3a398b559c768b9b3c324d72b0b0b4479.tar.xz |
usb: phy: msm: Manual PHY and LINK controller VBUS change notification
VBUS is not routed to USB PHY on recent Qualcomm platforms. USB controller
must see VBUS in order to pull-up DP when setting RS bit. Henc configure
USB PHY and LINK registers sense VBUS and enable manual pullup on D+ line.
Cc: Vamsi Krishna <vskrishn@codeaurora.org>
Cc: Mayank Rana <mrana@codeaurora.org>
Signed-off-by: Ivan T. Ivanov <ivan.ivanov@linaro.org>
Signed-off-by: Felipe Balbi <balbi@ti.com>
-rw-r--r-- | Documentation/devicetree/bindings/usb/msm-hsusb.txt | 4 | ||||
-rw-r--r-- | drivers/usb/phy/phy-msm-usb.c | 26 | ||||
-rw-r--r-- | include/linux/usb/msm_hsusb.h | 5 | ||||
-rw-r--r-- | include/linux/usb/msm_hsusb_hw.h | 9 |
4 files changed, 44 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/usb/msm-hsusb.txt b/Documentation/devicetree/bindings/usb/msm-hsusb.txt index f26bcfa..bd8d9e7 100644 --- a/Documentation/devicetree/bindings/usb/msm-hsusb.txt +++ b/Documentation/devicetree/bindings/usb/msm-hsusb.txt @@ -69,6 +69,10 @@ Optional properties: (no, min, max) where each value represents either a voltage in microvolts or a value corresponding to voltage corner. +- qcom,manual-pullup: If present, vbus is not routed to USB controller/phy + and controller driver therefore enables pull-up explicitly + before starting controller using usbcmd run/stop bit. + - extcon: phandles to external connector devices. First phandle should point to external connector, which provide "USB" cable events, the second should point to external connector diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index ad66c67..00c49bb 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -240,8 +240,14 @@ static void ulpi_init(struct msm_otg *motg) static int msm_phy_notify_disconnect(struct usb_phy *phy, enum usb_device_speed speed) { + struct msm_otg *motg = container_of(phy, struct msm_otg, phy); int val; + if (motg->manual_pullup) { + val = ULPI_MISC_A_VBUSVLDEXT | ULPI_MISC_A_VBUSVLDEXTSEL; + usb_phy_io_write(phy, val, ULPI_CLR(ULPI_MISC_A)); + } + /* * Put the transceiver in non-driving mode. Otherwise host * may not detect soft-disconnection. @@ -422,6 +428,24 @@ static int msm_phy_init(struct usb_phy *phy) ulpi_write(phy, ulpi_val, ULPI_USB_INT_EN_FALL); } + if (motg->manual_pullup) { + val = ULPI_MISC_A_VBUSVLDEXTSEL | ULPI_MISC_A_VBUSVLDEXT; + ulpi_write(phy, val, ULPI_SET(ULPI_MISC_A)); + + val = readl(USB_GENCONFIG_2); + val |= GENCONFIG_2_SESS_VLD_CTRL_EN; + writel(val, USB_GENCONFIG_2); + + val = readl(USB_USBCMD); + val |= USBCMD_SESS_VLD_CTRL; + writel(val, USB_USBCMD); + + val = ulpi_read(phy, ULPI_FUNC_CTRL); + val &= ~ULPI_FUNC_CTRL_OPMODE_MASK; + val |= ULPI_FUNC_CTRL_OPMODE_NORMAL; + ulpi_write(phy, val, ULPI_FUNC_CTRL); + } + if (motg->phy_number) writel(readl(USB_PHY_CTRL2) | BIT(16), USB_PHY_CTRL2); @@ -1520,6 +1544,8 @@ static int msm_otg_read_dt(struct platform_device *pdev, struct msm_otg *motg) motg->vdd_levels[VDD_LEVEL_MAX] = tmp[VDD_LEVEL_MAX]; } + motg->manual_pullup = of_property_read_bool(node, "qcom,manual-pullup"); + ext_id = ERR_PTR(-ENODEV); ext_vbus = ERR_PTR(-ENODEV); if (of_property_read_bool(node, "extcon")) { diff --git a/include/linux/usb/msm_hsusb.h b/include/linux/usb/msm_hsusb.h index c4d956e..e55a150 100644 --- a/include/linux/usb/msm_hsusb.h +++ b/include/linux/usb/msm_hsusb.h @@ -150,6 +150,9 @@ struct msm_usb_cable { * @chg_type: The type of charger attached. * @dcd_retires: The retry count used to track Data contact * detection process. + * @manual_pullup: true if VBUS is not routed to USB controller/phy + * and controller driver therefore enables pull-up explicitly before + * starting controller using usbcmd run/stop bit. * @vbus: VBUS signal state trakining, using extcon framework * @id: ID signal state trakining, using extcon framework */ @@ -181,6 +184,8 @@ struct msm_otg { struct reset_control *link_rst; int vdd_levels[3]; + bool manual_pullup; + struct msm_usb_cable vbus; struct msm_usb_cable id; }; diff --git a/include/linux/usb/msm_hsusb_hw.h b/include/linux/usb/msm_hsusb_hw.h index a29f603..e159b39 100644 --- a/include/linux/usb/msm_hsusb_hw.h +++ b/include/linux/usb/msm_hsusb_hw.h @@ -21,6 +21,8 @@ #define USB_AHBBURST (MSM_USB_BASE + 0x0090) #define USB_AHBMODE (MSM_USB_BASE + 0x0098) +#define USB_GENCONFIG_2 (MSM_USB_BASE + 0x00a0) + #define USB_CAPLENGTH (MSM_USB_BASE + 0x0100) /* 8 bit */ #define USB_USBCMD (MSM_USB_BASE + 0x0140) @@ -30,6 +32,9 @@ #define USB_PHY_CTRL (MSM_USB_BASE + 0x0240) #define USB_PHY_CTRL2 (MSM_USB_BASE + 0x0278) +#define GENCONFIG_2_SESS_VLD_CTRL_EN BIT(7) +#define USBCMD_SESS_VLD_CTRL BIT(25) + #define USBCMD_RESET 2 #define USB_USBINTR (MSM_USB_BASE + 0x0148) @@ -50,6 +55,10 @@ #define ULPI_PWR_CLK_MNG_REG 0x88 #define OTG_COMP_DISABLE BIT(0) +#define ULPI_MISC_A 0x96 +#define ULPI_MISC_A_VBUSVLDEXTSEL BIT(1) +#define ULPI_MISC_A_VBUSVLDEXT BIT(0) + #define ASYNC_INTR_CTRL (1 << 29) /* Enable async interrupt */ #define ULPI_STP_CTRL (1 << 30) /* Block communication with PHY */ #define PHY_RETEN (1 << 1) /* PHY retention enable/disable */ |