summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
authorAnish Bhatt <anish@gatech.edu>2015-10-13 04:02:36 (GMT)
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2015-10-13 17:32:40 (GMT)
commit56b3152e5e8b0501ff9ef100b772df8ecb3efd82 (patch)
treef54bfa48aecec55a0c8476c33d3dba6c1839f283
parenteb36cc282a9d9cc6c024010e7b65e88d1b088c54 (diff)
downloadlinux-56b3152e5e8b0501ff9ef100b772df8ecb3efd82.tar.xz
rtl8192u: BIT() macro cleanup
Use the BIT(x) macro directly instead using multiple BITX defines. Signed-off-by: Anish Bhatt <anish@gatech.edu> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat
-rw-r--r--drivers/staging/rtl8192u/ieee80211/ieee80211.h10
-rw-r--r--drivers/staging/rtl8192u/ieee80211/rtl819x_Qos.h49
-rw-r--r--drivers/staging/rtl8192u/r8192U.h95
-rw-r--r--drivers/staging/rtl8192u/r8192U_core.c12
-rw-r--r--drivers/staging/rtl8192u/r8192U_dm.c17
-rw-r--r--drivers/staging/rtl8192u/r8192U_hw.h145
-rw-r--r--drivers/staging/rtl8192u/r819xU_cmdpkt.h6
-rw-r--r--drivers/staging/rtl8192u/r819xU_phy.c4
8 files changed, 139 insertions, 199 deletions
diff --git a/drivers/staging/rtl8192u/ieee80211/ieee80211.h b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
index d481a26..967ef9a 100644
--- a/drivers/staging/rtl8192u/ieee80211/ieee80211.h
+++ b/drivers/staging/rtl8192u/ieee80211/ieee80211.h
@@ -415,7 +415,7 @@ typedef struct ieee_param {
/* QOS control */
#define IEEE80211_QCTL_TID 0x000F
-#define FC_QOS_BIT BIT7
+#define FC_QOS_BIT BIT(7)
#define IsDataFrame(pdu) ( ((pdu[0] & 0x0C)==0x08) ? true : false )
#define IsLegacyDataFrame(pdu) (IsDataFrame(pdu) && (!(pdu[0]&FC_QOS_BIT)) )
//added by wb. Is this right?
@@ -1565,10 +1565,10 @@ typedef struct _RT_POWER_SAVE_CONTROL {
} RT_POWER_SAVE_CONTROL, *PRT_POWER_SAVE_CONTROL;
typedef u32 RT_RF_CHANGE_SOURCE;
-#define RF_CHANGE_BY_SW BIT31
-#define RF_CHANGE_BY_HW BIT30
-#define RF_CHANGE_BY_PS BIT29
-#define RF_CHANGE_BY_IPS BIT28
+#define RF_CHANGE_BY_SW BIT(31)
+#define RF_CHANGE_BY_HW BIT(30)
+#define RF_CHANGE_BY_PS BIT(29)
+#define RF_CHANGE_BY_IPS BIT(28)
#define RF_CHANGE_BY_INIT 0 // Do not change the RFOff reason. Defined by Bruce, 2008-01-17.
typedef enum
diff --git a/drivers/staging/rtl8192u/ieee80211/rtl819x_Qos.h b/drivers/staging/rtl8192u/ieee80211/rtl819x_Qos.h
index 9fbce91..49c23c7 100644
--- a/drivers/staging/rtl8192u/ieee80211/rtl819x_Qos.h
+++ b/drivers/staging/rtl8192u/ieee80211/rtl819x_Qos.h
@@ -1,39 +1,6 @@
#ifndef __INC_QOS_TYPE_H
#define __INC_QOS_TYPE_H
-#define BIT0 0x00000001
-#define BIT1 0x00000002
-#define BIT2 0x00000004
-#define BIT3 0x00000008
-#define BIT4 0x00000010
-#define BIT5 0x00000020
-#define BIT6 0x00000040
-#define BIT7 0x00000080
-#define BIT8 0x00000100
-#define BIT9 0x00000200
-#define BIT10 0x00000400
-#define BIT11 0x00000800
-#define BIT12 0x00001000
-#define BIT13 0x00002000
-#define BIT14 0x00004000
-#define BIT15 0x00008000
-#define BIT16 0x00010000
-#define BIT17 0x00020000
-#define BIT18 0x00040000
-#define BIT19 0x00080000
-#define BIT20 0x00100000
-#define BIT21 0x00200000
-#define BIT22 0x00400000
-#define BIT23 0x00800000
-#define BIT24 0x01000000
-#define BIT25 0x02000000
-#define BIT26 0x04000000
-#define BIT27 0x08000000
-#define BIT28 0x10000000
-#define BIT29 0x20000000
-#define BIT30 0x40000000
-#define BIT31 0x80000000
-
#define MAX_WMMELE_LENGTH 64
//
@@ -375,17 +342,17 @@ typedef struct _ACM{
typedef u8 AC_UAPSD, *PAC_UAPSD;
-#define GET_VO_UAPSD(_apsd) ((_apsd) & BIT0)
-#define SET_VO_UAPSD(_apsd) ((_apsd) |= BIT0)
+#define GET_VO_UAPSD(_apsd) ((_apsd) & BIT(0))
+#define SET_VO_UAPSD(_apsd) ((_apsd) |= BIT(0))
-#define GET_VI_UAPSD(_apsd) ((_apsd) & BIT1)
-#define SET_VI_UAPSD(_apsd) ((_apsd) |= BIT1)
+#define GET_VI_UAPSD(_apsd) ((_apsd) & BIT(1))
+#define SET_VI_UAPSD(_apsd) ((_apsd) |= BIT(1))
-#define GET_BK_UAPSD(_apsd) ((_apsd) & BIT2)
-#define SET_BK_UAPSD(_apsd) ((_apsd) |= BIT2)
+#define GET_BK_UAPSD(_apsd) ((_apsd) & BIT(2))
+#define SET_BK_UAPSD(_apsd) ((_apsd) |= BIT(2))
-#define GET_BE_UAPSD(_apsd) ((_apsd) & BIT3)
-#define SET_BE_UAPSD(_apsd) ((_apsd) |= BIT3)
+#define GET_BE_UAPSD(_apsd) ((_apsd) & BIT(3))
+#define SET_BE_UAPSD(_apsd) ((_apsd) |= BIT(3))
//typedef struct _TCLASS{
diff --git a/drivers/staging/rtl8192u/r8192U.h b/drivers/staging/rtl8192u/r8192U.h
index a76748e..ee1c722 100644
--- a/drivers/staging/rtl8192u/r8192U.h
+++ b/drivers/staging/rtl8192u/r8192U.h
@@ -43,39 +43,6 @@
#define MAX_KEY_LEN 61
#define KEY_BUF_SIZE 5
-#define BIT0 0x00000001
-#define BIT1 0x00000002
-#define BIT2 0x00000004
-#define BIT3 0x00000008
-#define BIT4 0x00000010
-#define BIT5 0x00000020
-#define BIT6 0x00000040
-#define BIT7 0x00000080
-#define BIT8 0x00000100
-#define BIT9 0x00000200
-#define BIT10 0x00000400
-#define BIT11 0x00000800
-#define BIT12 0x00001000
-#define BIT13 0x00002000
-#define BIT14 0x00004000
-#define BIT15 0x00008000
-#define BIT16 0x00010000
-#define BIT17 0x00020000
-#define BIT18 0x00040000
-#define BIT19 0x00080000
-#define BIT20 0x00100000
-#define BIT21 0x00200000
-#define BIT22 0x00400000
-#define BIT23 0x00800000
-#define BIT24 0x01000000
-#define BIT25 0x02000000
-#define BIT26 0x04000000
-#define BIT27 0x08000000
-#define BIT28 0x10000000
-#define BIT29 0x20000000
-#define BIT30 0x40000000
-#define BIT31 0x80000000
-
#define Rx_Smooth_Factor 20
#define DMESG(x, a...)
#define DMESGW(x, a...)
@@ -87,44 +54,44 @@ extern u32 rt_global_debug_component;
pr_debug("RTL8192U: " x "\n", ##args); \
} while (0)
-#define COMP_TRACE BIT0 /* Function call tracing. */
-#define COMP_DBG BIT1
-#define COMP_INIT BIT2 /* Driver initialization/halt/reset. */
+#define COMP_TRACE BIT(0) /* Function call tracing. */
+#define COMP_DBG BIT(1)
+#define COMP_INIT BIT(2) /* Driver initialization/halt/reset. */
-#define COMP_RECV BIT3 /* Receive data path. */
-#define COMP_SEND BIT4 /* Send data path. */
-#define COMP_IO BIT5
+#define COMP_RECV BIT(3) /* Receive data path. */
+#define COMP_SEND BIT(4) /* Send data path. */
+#define COMP_IO BIT(5)
/* 802.11 Power Save mode or System/Device Power state. */
-#define COMP_POWER BIT6
+#define COMP_POWER BIT(6)
/* 802.11 link related: join/start BSS, leave BSS. */
-#define COMP_EPROM BIT7
-#define COMP_SWBW BIT8 /* Bandwidth switch. */
-#define COMP_POWER_TRACKING BIT9 /* 8190 TX Power Tracking */
-#define COMP_TURBO BIT10 /* Turbo Mode */
-#define COMP_QOS BIT11
-#define COMP_RATE BIT12 /* Rate Adaptive mechanism */
-#define COMP_RM BIT13 /* Radio Measurement */
-#define COMP_DIG BIT14
-#define COMP_PHY BIT15
-#define COMP_CH BIT16 /* Channel setting debug */
-#define COMP_TXAGC BIT17 /* Tx power */
-#define COMP_HIPWR BIT18 /* High Power Mechanism */
-#define COMP_HALDM BIT19 /* HW Dynamic Mechanism */
-#define COMP_SEC BIT20 /* Event handling */
-#define COMP_LED BIT21
-#define COMP_RF BIT22
-#define COMP_RXDESC BIT23 /* Rx desc information for SD3 debug */
+#define COMP_EPROM BIT(7)
+#define COMP_SWBW BIT(8) /* Bandwidth switch. */
+#define COMP_POWER_TRACKING BIT(9) /* 8190 TX Power Tracking */
+#define COMP_TURBO BIT(10) /* Turbo Mode */
+#define COMP_QOS BIT(11)
+#define COMP_RATE BIT(12) /* Rate Adaptive mechanism */
+#define COMP_RM BIT(13) /* Radio Measurement */
+#define COMP_DIG BIT(14)
+#define COMP_PHY BIT(15)
+#define COMP_CH BIT(16) /* Channel setting debug */
+#define COMP_TXAGC BIT(17) /* Tx power */
+#define COMP_HIPWR BIT(18) /* High Power Mechanism */
+#define COMP_HALDM BIT(19) /* HW Dynamic Mechanism */
+#define COMP_SEC BIT(20) /* Event handling */
+#define COMP_LED BIT(21)
+#define COMP_RF BIT(22)
+#define COMP_RXDESC BIT(23) /* Rx desc information for SD3 debug */
/* 11n or 8190 specific code */
-#define COMP_FIRMWARE BIT24 /* Firmware downloading */
-#define COMP_HT BIT25 /* 802.11n HT related information */
-#define COMP_AMSDU BIT26 /* A-MSDU Debugging */
-#define COMP_SCAN BIT27
-#define COMP_DOWN BIT29 /* rm driver module */
-#define COMP_RESET BIT30 /* Silent reset */
-#define COMP_ERR BIT31 /* Error out, always on */
+#define COMP_FIRMWARE BIT(24) /* Firmware downloading */
+#define COMP_HT BIT(25) /* 802.11n HT related information */
+#define COMP_AMSDU BIT(26) /* A-MSDU Debugging */
+#define COMP_SCAN BIT(27)
+#define COMP_DOWN BIT(29) /* rm driver module */
+#define COMP_RESET BIT(30) /* Silent reset */
+#define COMP_ERR BIT(31) /* Error out, always on */
#define RTL819x_DEBUG
#ifdef RTL819x_DEBUG
diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c
index eab0d81..678ecf6 100644
--- a/drivers/staging/rtl8192u/r8192U_core.c
+++ b/drivers/staging/rtl8192u/r8192U_core.c
@@ -233,7 +233,7 @@ static void CamResetAllEntry(struct net_device *dev)
* condition, Cam can not be reset because upper layer will not set
* this static key again.
*/
- ulcommand |= BIT31 | BIT30;
+ ulcommand |= BIT(31) | BIT(30);
write_nic_dword(dev, RWCAM, ulcommand);
}
@@ -242,7 +242,7 @@ static void CamResetAllEntry(struct net_device *dev)
void write_cam(struct net_device *dev, u8 addr, u32 data)
{
write_nic_dword(dev, WCAMI, data);
- write_nic_dword(dev, RWCAM, BIT31 | BIT16 | (addr & 0xff));
+ write_nic_dword(dev, RWCAM, BIT(31) | BIT(16) | (addr & 0xff));
}
u32 read_cam(struct net_device *dev, u8 addr)
@@ -2412,7 +2412,7 @@ static void rtl8192_get_eeprom_size(struct net_device *dev)
read_nic_word_E(dev, EPROM_CMD, &curCR);
RT_TRACE(COMP_EPROM,
"read from Reg EPROM_CMD(%x):%x\n", EPROM_CMD, curCR);
- /* whether need I consider BIT5? */
+ /* whether need I consider BIT(5?) */
priv->epromtype =
(curCR & Cmd9346CR_9356SEL) ? EPROM_93c56 : EPROM_93c46;
RT_TRACE(COMP_EPROM,
@@ -5180,14 +5180,14 @@ void setKey(struct net_device *dev, u8 EntryNo, u8 KeyIndex, u16 KeyType,
dev, EntryNo, KeyIndex, KeyType, MacAddr);
if (DefaultKey)
- usConfig |= BIT15 | (KeyType << 2);
+ usConfig |= BIT(15) | (KeyType << 2);
else
- usConfig |= BIT15 | (KeyType << 2) | KeyIndex;
+ usConfig |= BIT(15) | (KeyType << 2) | KeyIndex;
for (i = 0; i < CAM_CONTENT_COUNT; i++) {
TargetCommand = i + CAM_CONTENT_COUNT * EntryNo;
- TargetCommand |= BIT31 | BIT16;
+ TargetCommand |= BIT(31) | BIT(16);
if (i == 0) { /* MAC|Config */
TargetContent = (u32)(*(MacAddr + 0)) << 16 |
diff --git a/drivers/staging/rtl8192u/r8192U_dm.c b/drivers/staging/rtl8192u/r8192U_dm.c
index 5277f2e..375ec96 100644
--- a/drivers/staging/rtl8192u/r8192U_dm.c
+++ b/drivers/staging/rtl8192u/r8192U_dm.c
@@ -325,21 +325,26 @@ static void dm_check_rate_adaptive(struct net_device *dev)
(!pHTInfo->bCurTxBW40MHz && pHTInfo->bCurShortGI20MHz);
pra->upper_rssi_threshold_ratr =
- (pra->upper_rssi_threshold_ratr & (~BIT31)) | ((bshort_gi_enabled) ? BIT31:0);
+ (pra->upper_rssi_threshold_ratr & (~BIT(31))) |
+ ((bshort_gi_enabled) ? BIT(31) : 0);
pra->middle_rssi_threshold_ratr =
- (pra->middle_rssi_threshold_ratr & (~BIT31)) | ((bshort_gi_enabled) ? BIT31:0);
+ (pra->middle_rssi_threshold_ratr & (~BIT(31))) |
+ ((bshort_gi_enabled) ? BIT(31) : 0);
if (priv->CurrentChannelBW != HT_CHANNEL_WIDTH_20) {
pra->low_rssi_threshold_ratr =
- (pra->low_rssi_threshold_ratr_40M & (~BIT31)) | ((bshort_gi_enabled) ? BIT31:0);
+ (pra->low_rssi_threshold_ratr_40M & (~BIT(31))) |
+ ((bshort_gi_enabled) ? BIT(31) : 0);
} else {
pra->low_rssi_threshold_ratr =
- (pra->low_rssi_threshold_ratr_20M & (~BIT31)) | ((bshort_gi_enabled) ? BIT31:0);
+ (pra->low_rssi_threshold_ratr_20M & (~BIT(31))) |
+ ((bshort_gi_enabled) ? BIT(31) : 0);
}
/* cosa add for test */
pra->ping_rssi_ratr =
- (pra->ping_rssi_ratr & (~BIT31)) | ((bshort_gi_enabled) ? BIT31:0);
+ (pra->ping_rssi_ratr & (~BIT(31))) |
+ ((bshort_gi_enabled) ? BIT(31) : 0);
/* 2007/10/08 MH We support RA smooth scheme now. When it is the first
time to link with AP. We will not change upper/lower threshold. If
@@ -2378,7 +2383,7 @@ static void dm_check_pbc_gpio(struct net_device *dev)
if (tmp1byte == 0xff)
return;
- if (tmp1byte&BIT6 || tmp1byte&BIT0) {
+ if (tmp1byte & BIT(6) || tmp1byte & BIT(0)) {
/*
* Here we only set bPbcPressed to TRUE
* After trigger PBC, the variable will be set to FALSE
diff --git a/drivers/staging/rtl8192u/r8192U_hw.h b/drivers/staging/rtl8192u/r8192U_hw.h
index a93694f..e07d65d 100644
--- a/drivers/staging/rtl8192u/r8192U_hw.h
+++ b/drivers/staging/rtl8192u/r8192U_hw.h
@@ -55,17 +55,17 @@ typedef enum _BaseBand_Config_Type{
#define BB_ANTATTEN_CHAN14 0x0c
#define BB_ANTENNA_B 0x40
-#define BB_HOST_BANG (1<<30)
-#define BB_HOST_BANG_EN (1<<2)
-#define BB_HOST_BANG_CLK (1<<1)
-#define BB_HOST_BANG_RW (1<<3)
+#define BB_HOST_BANG BIT(30)
+#define BB_HOST_BANG_EN BIT(2)
+#define BB_HOST_BANG_CLK BIT(1)
+#define BB_HOST_BANG_RW BIT(3)
#define BB_HOST_BANG_DATA 1
//#if (RTL819X_FPGA_VER & RTL819X_FPGA_VIVI_070920)
#define AFR 0x010
-#define AFR_CardBEn (1<<0)
-#define AFR_CLKRUN_SEL (1<<1)
-#define AFR_FuncRegEn (1<<2)
+#define AFR_CardBEn BIT(0)
+#define AFR_CLKRUN_SEL BIT(1)
+#define AFR_FuncRegEn BIT(2)
#define RTL8190_EEPROM_ID 0x8129
#define EEPROM_VID 0x02
#define EEPROM_PID 0x04
@@ -126,38 +126,39 @@ enum _RTL8192Usb_HW {
#define TCR_LRL_OFFSET 0
#define TCR_SRL_OFFSET 8
#define TCR_MXDMA_OFFSET 21
-#define TCR_SAT BIT24 // Enable Rate depedent ack timeout timer
+#define TCR_SAT BIT(24) // Enable Rate depedent ack timeout timer
RCR = 0x044, // Receive Configuration Register
-#define MAC_FILTER_MASK ((1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<5) | \
- (1<<12) | (1<<18) | (1<<19) | (1<<20) | (1<<21) | (1<<22) | (1<<23))
-#define RX_FIFO_THRESHOLD_MASK ((1<<13) | (1<<14) | (1<<15))
+#define MAC_FILTER_MASK (BIT(0) | BIT(1) | BIT(2) | BIT(3) | BIT(5) | \
+ BIT(12) | BIT(18) | BIT(19) | BIT(20) | BIT(21) | \
+ BIT(22) | BIT(23))
+#define RX_FIFO_THRESHOLD_MASK (BIT(13) | BIT(14) | BIT(15))
#define RX_FIFO_THRESHOLD_SHIFT 13
#define RX_FIFO_THRESHOLD_128 3
#define RX_FIFO_THRESHOLD_256 4
#define RX_FIFO_THRESHOLD_512 5
#define RX_FIFO_THRESHOLD_1024 6
#define RX_FIFO_THRESHOLD_NONE 7
-#define MAX_RX_DMA_MASK ((1<<8) | (1<<9) | (1<<10))
+#define MAX_RX_DMA_MASK (BIT(8) | BIT(9) | BIT(10))
#define RCR_MXDMA_OFFSET 8
#define RCR_FIFO_OFFSET 13
-#define RCR_ONLYERLPKT BIT31 // Early Receiving based on Packet Size.
-#define RCR_ENCS2 BIT30 // Enable Carrier Sense Detection Method 2
-#define RCR_ENCS1 BIT29 // Enable Carrier Sense Detection Method 1
-#define RCR_ENMBID BIT27 // Enable Multiple BssId.
-#define RCR_ACKTXBW (BIT24|BIT25) // TXBW Setting of ACK frames
-#define RCR_CBSSID BIT23 // Accept BSSID match packet
-#define RCR_APWRMGT BIT22 // Accept power management packet
-#define RCR_ADD3 BIT21 // Accept address 3 match packet
-#define RCR_AMF BIT20 // Accept management type frame
-#define RCR_ACF BIT19 // Accept control type frame
-#define RCR_ADF BIT18 // Accept data type frame
-#define RCR_RXFTH BIT13 // Rx FIFO Threshold
-#define RCR_AICV BIT12 // Accept ICV error packet
-#define RCR_ACRC32 BIT5 // Accept CRC32 error packet
-#define RCR_AB BIT3 // Accept broadcast packet
-#define RCR_AM BIT2 // Accept multicast packet
-#define RCR_APM BIT1 // Accept physical match packet
-#define RCR_AAP BIT0 // Accept all unicast packet
+#define RCR_ONLYERLPKT BIT(31) // Early Receiving based on Packet Size.
+#define RCR_ENCS2 BIT(30) // Enable Carrier Sense Detection Method 2
+#define RCR_ENCS1 BIT(29) // Enable Carrier Sense Detection Method 1
+#define RCR_ENMBID BIT(27) // Enable Multiple BssId.
+#define RCR_ACKTXBW (BIT(24) | BIT(25)) // TXBW Setting of ACK frames
+#define RCR_CBSSID BIT(23) // Accept BSSID match packet
+#define RCR_APWRMGT BIT(22) // Accept power management packet
+#define RCR_ADD3 BIT(21) // Accept address 3 match packet
+#define RCR_AMF BIT(20) // Accept management type frame
+#define RCR_ACF BIT(19) // Accept control type frame
+#define RCR_ADF BIT(18) // Accept data type frame
+#define RCR_RXFTH BIT(13) // Rx FIFO Threshold
+#define RCR_AICV BIT(12) // Accept ICV error packet
+#define RCR_ACRC32 BIT(5) // Accept CRC32 error packet
+#define RCR_AB BIT(3) // Accept broadcast packet
+#define RCR_AM BIT(2) // Accept multicast packet
+#define RCR_APM BIT(1) // Accept physical match packet
+#define RCR_AAP BIT(0) // Accept all unicast packet
SLOT_TIME = 0x049, // Slot Time Register
ACK_TIMEOUT = 0x04c, // Ack Timeout Register
PIFS_TIME = 0x04d, // PIFS time
@@ -180,12 +181,12 @@ enum _RTL8192Usb_HW {
WCAMI = 0x0A4, // Software write CAM input content
RCAMO = 0x0A8, // Software read/write CAM config
SECR = 0x0B0, //Security Configuration Register
-#define SCR_TxUseDK BIT0 //Force Tx Use Default Key
-#define SCR_RxUseDK BIT1 //Force Rx Use Default Key
-#define SCR_TxEncEnable BIT2 //Enable Tx Encryption
-#define SCR_RxDecEnable BIT3 //Enable Rx Decryption
-#define SCR_SKByA2 BIT4 //Search kEY BY A2
-#define SCR_NoSKMC BIT5 //No Key Search for Multicast
+#define SCR_TxUseDK BIT(0) //Force Tx Use Default Key
+#define SCR_RxUseDK BIT(1) //Force Rx Use Default Key
+#define SCR_TxEncEnable BIT(2) //Enable Tx Encryption
+#define SCR_RxDecEnable BIT(3) //Enable Rx Decryption
+#define SCR_SKByA2 BIT(4) //Search kEY BY A2
+#define SCR_NoSKMC BIT(5) //No Key Search for Multicast
#define SCR_UseDK 0x01
#define SCR_TxSecEnable 0x02
#define SCR_RxSecEnable 0x04
@@ -226,13 +227,13 @@ enum _RTL8192Usb_HW {
//// 8190 AcmHwCtrl bits (offset 0x171, 1 byte)
////----------------------------------------------------------------------------
//
-#define AcmHw_HwEn BIT0
-#define AcmHw_BeqEn BIT1
-#define AcmHw_ViqEn BIT2
-#define AcmHw_VoqEn BIT3
-#define AcmHw_BeqStatus BIT4
-#define AcmHw_ViqStatus BIT5
-#define AcmHw_VoqStatus BIT6
+#define AcmHw_HwEn BIT(0)
+#define AcmHw_BeqEn BIT(1)
+#define AcmHw_ViqEn BIT(2)
+#define AcmHw_VoqEn BIT(3)
+#define AcmHw_BeqStatus BIT(4)
+#define AcmHw_ViqStatus BIT(5)
+#define AcmHw_VoqStatus BIT(6)
AcmFwCtrl = 0x172, // ACM Firmware Control Register
AES_11N_FIX = 0x173,
@@ -281,18 +282,18 @@ enum _RTL8192Usb_HW {
NHM_RPI_COUNTER5 = 0x269, // Noise Histogram RPI counter5, the fraction of signal strength in (NHM_THRESHOLD4, NHM_THRESHOLD5].
NHM_RPI_COUNTER6 = 0x26A, // Noise Histogram RPI counter6, the fraction of signal strength in (NHM_THRESHOLD5, NHM_THRESHOLD6].
NHM_RPI_COUNTER7 = 0x26B, // Noise Histogram RPI counter7, the fraction of signal strength in (NHM_THRESHOLD6, NHM_THRESHOLD7].
-#define BW_OPMODE_11J BIT0
-#define BW_OPMODE_5G BIT1
-#define BW_OPMODE_20MHZ BIT2
+#define BW_OPMODE_11J BIT(0)
+#define BW_OPMODE_5G BIT(1)
+#define BW_OPMODE_20MHZ BIT(2)
BW_OPMODE = 0x300, // Bandwidth operation mode
MSR = 0x303, // Media Status register
-#define MSR_LINK_MASK ((1<<0)|(1<<1))
+#define MSR_LINK_MASK (BIT(0)|BIT(1))
#define MSR_LINK_MANAGED 2
#define MSR_LINK_NONE 0
#define MSR_LINK_SHIFT 0
#define MSR_LINK_ADHOC 1
#define MSR_LINK_MASTER 3
-#define MSR_LINK_ENEDCA (1<<4)
+#define MSR_LINK_ENEDCA BIT(4)
RETRY_LIMIT = 0x304, // Retry Limit [15:8]-short, [7:0]-long
#define RETRY_LIMIT_SHORT_SHIFT 8
#define RETRY_LIMIT_LONG_SHIFT 0
@@ -304,27 +305,27 @@ enum _RTL8192Usb_HW {
#define RRSR_RSC_LOWSUBCHNL 0x400000
#define RRSR_RSC_UPSUBCHANL 0x200000
#define RRSR_SHORT 0x800000
-#define RRSR_1M BIT0
-#define RRSR_2M BIT1
-#define RRSR_5_5M BIT2
-#define RRSR_11M BIT3
-#define RRSR_6M BIT4
-#define RRSR_9M BIT5
-#define RRSR_12M BIT6
-#define RRSR_18M BIT7
-#define RRSR_24M BIT8
-#define RRSR_36M BIT9
-#define RRSR_48M BIT10
-#define RRSR_54M BIT11
-#define RRSR_MCS0 BIT12
-#define RRSR_MCS1 BIT13
-#define RRSR_MCS2 BIT14
-#define RRSR_MCS3 BIT15
-#define RRSR_MCS4 BIT16
-#define RRSR_MCS5 BIT17
-#define RRSR_MCS6 BIT18
-#define RRSR_MCS7 BIT19
-#define BRSR_AckShortPmb BIT23 // CCK ACK: use Short Preamble or not.
+#define RRSR_1M BIT(0)
+#define RRSR_2M BIT(1)
+#define RRSR_5_5M BIT(2)
+#define RRSR_11M BIT(3)
+#define RRSR_6M BIT(4)
+#define RRSR_9M BIT(5)
+#define RRSR_12M BIT(6)
+#define RRSR_18M BIT(7)
+#define RRSR_24M BIT(8)
+#define RRSR_36M BIT(9)
+#define RRSR_48M BIT(10)
+#define RRSR_54M BIT(11)
+#define RRSR_MCS0 BIT(12)
+#define RRSR_MCS1 BIT(13)
+#define RRSR_MCS2 BIT(14)
+#define RRSR_MCS3 BIT(15)
+#define RRSR_MCS4 BIT(16)
+#define RRSR_MCS5 BIT(17)
+#define RRSR_MCS6 BIT(18)
+#define RRSR_MCS7 BIT(19)
+#define BRSR_AckShortPmb BIT(23) // CCK ACK: use Short Preamble or not.
RATR0 = 0x320, // Rate Adaptive Table register1
UFWP = 0x318,
DRIVER_RSSI = 0x32c, // Driver tell Firmware current RSSI
@@ -380,10 +381,10 @@ enum _RTL8192Usb_HW {
MacBlkCtrl = 0x403, // Mac block on/off control register
EPROM_CMD = 0xfe58,
-#define Cmd9346CR_9356SEL (1<<4)
-#define EPROM_CMD_RESERVED_MASK (1<<5)
+#define Cmd9346CR_9356SEL BIT(4)
+#define EPROM_CMD_RESERVED_MASK BIT(5)
#define EPROM_CMD_OPERATING_MODE_SHIFT 6
-#define EPROM_CMD_OPERATING_MODE_MASK ((1<<7)|(1<<6))
+#define EPROM_CMD_OPERATING_MODE_MASK (BIT(7) | BIT(6))
#define EPROM_CMD_CONFIG 0x3
#define EPROM_CMD_NORMAL 0
#define EPROM_CMD_LOAD 1
diff --git a/drivers/staging/rtl8192u/r819xU_cmdpkt.h b/drivers/staging/rtl8192u/r819xU_cmdpkt.h
index cc8029a..f490e25 100644
--- a/drivers/staging/rtl8192u/r819xU_cmdpkt.h
+++ b/drivers/staging/rtl8192u/r819xU_cmdpkt.h
@@ -9,9 +9,9 @@
#define CMPK_TX_RAHIS_SIZE sizeof(cmpk_tx_rahis_t)
/* 2008/05/08 amy For USB constant. */
-#define ISR_TxBcnOk BIT27 /* Transmit Beacon OK */
-#define ISR_TxBcnErr BIT26 /* Transmit Beacon Error */
-#define ISR_BcnTimerIntr BIT13 /* Beacon Timer Interrupt */
+#define ISR_TxBcnOk BIT(27) /* Transmit Beacon OK */
+#define ISR_TxBcnErr BIT(26) /* Transmit Beacon Error */
+#define ISR_BcnTimerIntr BIT(13) /* Beacon Timer Interrupt */
/* Define element ID of command packet. */
diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c
index e5dbaca..7065644 100644
--- a/drivers/staging/rtl8192u/r819xU_phy.c
+++ b/drivers/staging/rtl8192u/r819xU_phy.c
@@ -1110,7 +1110,7 @@ bool rtl8192_SetRFPowerState(struct net_device *dev,
case eRfOn:
/* RF-A, RF-B */
/* enable RF-Chip A/B - 0x860[4] */
- rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4,
+ rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT(4),
0x1);
/* analog to digital on - 0x88c[9:8] */
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0x300,
@@ -1135,7 +1135,7 @@ bool rtl8192_SetRFPowerState(struct net_device *dev,
case eRfOff:
/* RF-A, RF-B */
/* disable RF-Chip A/B - 0x860[4] */
- rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT4,
+ rtl8192_setBBreg(dev, rFPGA0_XA_RFInterfaceOE, BIT(4),
0x0);
/* analog to digital off, for power save */
rtl8192_setBBreg(dev, rFPGA0_AnalogParameter4, 0xf00,
generated by cgit v0.10.2 at 2024-11-01 09:48:39 (GMT)