diff options
author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2012-09-14 23:58:58 (GMT) |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2012-09-14 23:58:58 (GMT) |
commit | 67e6da702753dac8f0540209dded80a0c4e60d81 (patch) | |
tree | 99ed3b5656d8731df6a2458406a7fccb91bd4219 | |
parent | 7ebcb334433fa73c74b0c397fab831cdc2000418 (diff) | |
download | linux-67e6da702753dac8f0540209dded80a0c4e60d81.tar.xz |
USB: serial: io_ti.c: remove dbg() usage
dbg() was a very old USB-serial-specific macro.
This patch removes it from being used in the
driver and uses dev_dbg() instead.
CC: Johan Hovold <jhovold@gmail.com>
CC: "Eric W. Biederman" <ebiederm@xmission.com>
CC: Rusty Russell <rusty@rustcorp.com.au>
CC: Alan Stern <stern@rowland.harvard.edu>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
-rw-r--r-- | drivers/usb/serial/io_ti.c | 383 |
1 files changed, 162 insertions, 221 deletions
diff --git a/drivers/usb/serial/io_ti.c b/drivers/usb/serial/io_ti.c index 3936904..54916d7 100644 --- a/drivers/usb/serial/io_ti.c +++ b/drivers/usb/serial/io_ti.c @@ -233,8 +233,8 @@ static int ti_vread_sync(struct usb_device *dev, __u8 request, if (status < 0) return status; if (status != size) { - dbg("%s - wanted to write %d, but only wrote %d", - __func__, size, status); + dev_dbg(&dev->dev, "%s - wanted to write %d, but only wrote %d\n", + __func__, size, status); return -ECOMM; } return 0; @@ -251,8 +251,8 @@ static int ti_vsend_sync(struct usb_device *dev, __u8 request, if (status < 0) return status; if (status != size) { - dbg("%s - wanted to write %d, but only wrote %d", - __func__, size, status); + dev_dbg(&dev->dev, "%s - wanted to write %d, but only wrote %d\n", + __func__, size, status); return -ECOMM; } return 0; @@ -270,7 +270,7 @@ static int purge_port(struct usb_serial_port *port, __u16 mask) { int port_number = port->number - port->serial->minor; - dbg("%s - port %d, mask %x", __func__, port_number, mask); + dev_dbg(&port->dev, "%s - port %d, mask %x\n", __func__, port_number, mask); return send_cmd(port->serial->dev, UMPC_PURGE_PORT, @@ -295,7 +295,7 @@ static int read_download_mem(struct usb_device *dev, int start_address, __u8 read_length; __be16 be_start_address; - dbg("%s - @ %x for %d", __func__, start_address, length); + dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, length); /* Read in blocks of 64 bytes * (TI firmware can't handle more than 64 byte reads) @@ -307,8 +307,7 @@ static int read_download_mem(struct usb_device *dev, int start_address, read_length = (__u8)length; if (read_length > 1) { - dbg("%s - @ %x for %d", __func__, - start_address, read_length); + dev_dbg(&dev->dev, "%s - @ %x for %d\n", __func__, start_address, read_length); } be_start_address = cpu_to_be16(start_address); status = ti_vread_sync(dev, UMPC_MEMORY_READ, @@ -317,7 +316,7 @@ static int read_download_mem(struct usb_device *dev, int start_address, buffer, read_length); if (status) { - dbg("%s - ERROR %x", __func__, status); + dev_dbg(&dev->dev, "%s - ERROR %x\n", __func__, status); return status; } @@ -353,13 +352,13 @@ static int read_boot_mem(struct edgeport_serial *serial, UMPC_MEMORY_READ, serial->TI_I2C_Type, (__u16)(start_address+i), &buffer[i], 0x01); if (status) { - dbg("%s - ERROR %x", __func__, status); + dev_dbg(&serial->serial->dev->dev, "%s - ERROR %x\n", __func__, status); return status; } } - dbg("%s - start_address = %x, length = %d", - __func__, start_address, length); + dev_dbg(&serial->serial->dev->dev, "%s - start_address = %x, length = %d\n", + __func__, start_address, length); usb_serial_debug_data(debug, &serial->serial->dev->dev, __func__, length, buffer); @@ -398,8 +397,7 @@ static int write_boot_mem(struct edgeport_serial *serial, return status; } - dbg("%s - start_sddr = %x, length = %d", - __func__, start_address, length); + dev_dbg(&serial->serial->dev->dev, "%s - start_sddr = %x, length = %d\n", __func__, start_address, length); usb_serial_debug_data(debug, &serial->serial->dev->dev, __func__, length, buffer); @@ -411,6 +409,7 @@ static int write_boot_mem(struct edgeport_serial *serial, static int write_i2c_mem(struct edgeport_serial *serial, int start_address, int length, __u8 address_type, __u8 *buffer) { + struct device *dev = &serial->serial->dev->dev; int status = 0; int write_length; __be16 be_start_address; @@ -424,10 +423,9 @@ static int write_i2c_mem(struct edgeport_serial *serial, if (write_length > length) write_length = length; - dbg("%s - BytesInFirstPage Addr = %x, length = %d", - __func__, start_address, write_length); - usb_serial_debug_data(debug, &serial->serial->dev->dev, - __func__, write_length, buffer); + dev_dbg(dev, "%s - BytesInFirstPage Addr = %x, length = %d\n", + __func__, start_address, write_length); + usb_serial_debug_data(debug, dev, __func__, write_length, buffer); /* Write first page */ be_start_address = cpu_to_be16(start_address); @@ -436,7 +434,7 @@ static int write_i2c_mem(struct edgeport_serial *serial, (__force __u16)be_start_address, buffer, write_length); if (status) { - dbg("%s - ERROR %d", __func__, status); + dev_dbg(dev, "%s - ERROR %d\n", __func__, status); return status; } @@ -452,10 +450,9 @@ static int write_i2c_mem(struct edgeport_serial *serial, else write_length = length; - dbg("%s - Page Write Addr = %x, length = %d", - __func__, start_address, write_length); - usb_serial_debug_data(debug, &serial->serial->dev->dev, - __func__, write_length, buffer); + dev_dbg(dev, "%s - Page Write Addr = %x, length = %d\n", + __func__, start_address, write_length); + usb_serial_debug_data(debug, dev, __func__, write_length, buffer); /* Write next page */ be_start_address = cpu_to_be16(start_address); @@ -464,8 +461,7 @@ static int write_i2c_mem(struct edgeport_serial *serial, (__force __u16)be_start_address, buffer, write_length); if (status) { - dev_err(&serial->serial->dev->dev, "%s - ERROR %d\n", - __func__, status); + dev_err(dev, "%s - ERROR %d\n", __func__, status); return status; } @@ -508,7 +504,7 @@ static int tx_active(struct edgeport_port *port) if (status) goto exit_is_tx_active; - dbg("%s - XByteCount 0x%X", __func__, oedb->XByteCount); + dev_dbg(&port->port->dev, "%s - XByteCount 0x%X\n", __func__, oedb->XByteCount); /* and the LSR */ status = read_ram(port->port->serial->dev, @@ -516,7 +512,7 @@ static int tx_active(struct edgeport_port *port) if (status) goto exit_is_tx_active; - dbg("%s - LSR = 0x%X", __func__, *lsr); + dev_dbg(&port->port->dev, "%s - LSR = 0x%X\n", __func__, *lsr); /* If either buffer has data or we are transmitting then return TRUE */ if ((oedb->XByteCount & 0x80) != 0) @@ -527,7 +523,7 @@ static int tx_active(struct edgeport_port *port) /* We return Not Active if we get any kind of error */ exit_is_tx_active: - dbg("%s - return %d", __func__, bytes_left); + dev_dbg(&port->port->dev, "%s - return %d\n", __func__, bytes_left); kfree(lsr); kfree(oedb); @@ -599,14 +595,13 @@ static int choose_config(struct usb_device *dev) * configuration # 1, which is Config Descriptor 0. */ - dbg("%s - Number of Interfaces = %d", - __func__, dev->config->desc.bNumInterfaces); - dbg("%s - MAX Power = %d", - __func__, dev->config->desc.bMaxPower * 2); + dev_dbg(&dev->dev, "%s - Number of Interfaces = %d\n", + __func__, dev->config->desc.bNumInterfaces); + dev_dbg(&dev->dev, "%s - MAX Power = %d\n", + __func__, dev->config->desc.bMaxPower * 2); if (dev->config->desc.bNumInterfaces != 1) { - dev_err(&dev->dev, "%s - bNumInterfaces is not 1, ERROR!\n", - __func__); + dev_err(&dev->dev, "%s - bNumInterfaces is not 1, ERROR!\n", __func__); return -ENODEV; } @@ -684,7 +679,7 @@ static int valid_csum(struct ti_i2c_desc *rom_desc, __u8 *buffer) cs = (__u8)(cs + buffer[i]); if (cs != rom_desc->CheckSum) { - dbg("%s - Mismatch %x - %x", __func__, rom_desc->CheckSum, cs); + pr_debug("%s - Mismatch %x - %x", __func__, rom_desc->CheckSum, cs); return -EINVAL; } return 0; @@ -736,11 +731,11 @@ static int check_i2c_image(struct edgeport_serial *serial) if ((start_address + sizeof(struct ti_i2c_desc) + rom_desc->Size) > TI_MAX_I2C_SIZE) { status = -ENODEV; - dbg("%s - structure too big, erroring out.", __func__); + dev_dbg(dev, "%s - structure too big, erroring out.\n", __func__); break; } - dbg("%s Type = 0x%x", __func__, rom_desc->Type); + dev_dbg(dev, "%s Type = 0x%x\n", __func__, rom_desc->Type); /* Skip type 2 record */ ttype = rom_desc->Type & 0x0f; @@ -779,18 +774,18 @@ static int get_manuf_info(struct edgeport_serial *serial, __u8 *buffer) int start_address; struct ti_i2c_desc *rom_desc; struct edge_ti_manuf_descriptor *desc; + struct device *dev = &serial->serial->dev->dev; rom_desc = kmalloc(sizeof(*rom_desc), GFP_KERNEL); if (!rom_desc) { - dev_err(&serial->serial->dev->dev, "%s - out of memory\n", - __func__); + dev_err(dev, "%s - out of memory\n", __func__); return -ENOMEM; } start_address = get_descriptor_addr(serial, I2C_DESC_TYPE_ION, rom_desc); if (!start_address) { - dbg("%s - Edge Descriptor not found in I2C", __func__); + dev_dbg(dev, "%s - Edge Descriptor not found in I2C\n", __func__); status = -ENODEV; goto exit; } @@ -804,12 +799,12 @@ static int get_manuf_info(struct edgeport_serial *serial, __u8 *buffer) status = valid_csum(rom_desc, buffer); desc = (struct edge_ti_manuf_descriptor *)buffer; - dbg("%s - IonConfig 0x%x", __func__, desc->IonConfig); - dbg("%s - Version %d", __func__, desc->Version); - dbg("%s - Cpu/Board 0x%x", __func__, desc->CpuRev_BoardRev); - dbg("%s - NumPorts %d", __func__, desc->NumPorts); - dbg("%s - NumVirtualPorts %d", __func__, desc->NumVirtualPorts); - dbg("%s - TotalPorts %d", __func__, desc->TotalPorts); + dev_dbg(dev, "%s - IonConfig 0x%x\n", __func__, desc->IonConfig); + dev_dbg(dev, "%s - Version %d\n", __func__, desc->Version); + dev_dbg(dev, "%s - Cpu/Board 0x%x\n", __func__, desc->CpuRev_BoardRev); + dev_dbg(dev, "%s - NumPorts %d\n", __func__, desc->NumPorts); + dev_dbg(dev, "%s - NumVirtualPorts %d\n", __func__, desc->NumVirtualPorts); + dev_dbg(dev, "%s - TotalPorts %d\n", __func__, desc->TotalPorts); exit: kfree(rom_desc); @@ -903,13 +898,13 @@ static int build_i2c_fw_hdr(__u8 *header, struct device *dev) /* Try to figure out what type of I2c we have */ static int i2c_type_bootmode(struct edgeport_serial *serial) { + struct device *dev = &serial->serial->dev->dev; int status; u8 *data; data = kmalloc(1, GFP_KERNEL); if (!data) { - dev_err(&serial->serial->dev->dev, - "%s - out of memory\n", __func__); + dev_err(dev, "%s - out of memory\n", __func__); return -ENOMEM; } @@ -917,11 +912,11 @@ static int i2c_type_bootmode(struct edgeport_serial *serial) status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ, DTK_ADDR_SPACE_I2C_TYPE_II, 0, data, 0x01); if (status) - dbg("%s - read 2 status error = %d", __func__, status); + dev_dbg(dev, "%s - read 2 status error = %d\n", __func__, status); else - dbg("%s - read 2 data = 0x%x", __func__, *data); + dev_dbg(dev, "%s - read 2 data = 0x%x\n", __func__, *data); if ((!status) && (*data == UMP5152 || *data == UMP3410)) { - dbg("%s - ROM_TYPE_II", __func__); + dev_dbg(dev, "%s - ROM_TYPE_II\n", __func__); serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II; goto out; } @@ -930,16 +925,16 @@ static int i2c_type_bootmode(struct edgeport_serial *serial) status = ti_vread_sync(serial->serial->dev, UMPC_MEMORY_READ, DTK_ADDR_SPACE_I2C_TYPE_III, 0, data, 0x01); if (status) - dbg("%s - read 3 status error = %d", __func__, status); + dev_dbg(dev, "%s - read 3 status error = %d\n", __func__, status); else - dbg("%s - read 2 data = 0x%x", __func__, *data); + dev_dbg(dev, "%s - read 2 data = 0x%x\n", __func__, *data); if ((!status) && (*data == UMP5152 || *data == UMP3410)) { - dbg("%s - ROM_TYPE_III", __func__); + dev_dbg(dev, "%s - ROM_TYPE_III\n", __func__); serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_III; goto out; } - dbg("%s - Unknown", __func__); + dev_dbg(dev, "%s - Unknown\n", __func__); serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II; status = -ENODEV; out: @@ -1050,11 +1045,11 @@ static int download_fw(struct edgeport_serial *serial) if (serial->product_info.TiMode == TI_MODE_DOWNLOAD) { struct ti_i2c_desc *rom_desc; - dbg("%s - RUNNING IN DOWNLOAD MODE", __func__); + dev_dbg(dev, "%s - RUNNING IN DOWNLOAD MODE\n", __func__); status = check_i2c_image(serial); if (status) { - dbg("%s - DOWNLOAD MODE -- BAD I2C", __func__); + dev_dbg(dev, "%s - DOWNLOAD MODE -- BAD I2C\n", __func__); return status; } @@ -1074,7 +1069,7 @@ static int download_fw(struct edgeport_serial *serial) /* Check version number of ION descriptor */ if (!ignore_cpu_rev && ti_cpu_rev(ti_manuf_desc) < 2) { - dbg("%s - Wrong CPU Rev %d (Must be 2)", + dev_dbg(dev, "%s - Wrong CPU Rev %d (Must be 2)\n", __func__, ti_cpu_rev(ti_manuf_desc)); kfree(ti_manuf_desc); return -EINVAL; @@ -1094,8 +1089,7 @@ static int download_fw(struct edgeport_serial *serial) struct ti_i2c_firmware_rec *firmware_version; u8 *record; - dbg("%s - Found Type FIRMWARE (Type 2) record", - __func__); + dev_dbg(dev, "%s - Found Type FIRMWARE (Type 2) record\n", __func__); firmware_version = kmalloc(sizeof(*firmware_version), GFP_KERNEL); @@ -1127,22 +1121,21 @@ static int download_fw(struct edgeport_serial *serial) download_new_ver = (OperationalMajorVersion << 8) + (OperationalMinorVersion); - dbg("%s - >> FW Versions Device %d.%d Driver %d.%d", - __func__, - firmware_version->Ver_Major, - firmware_version->Ver_Minor, - OperationalMajorVersion, - OperationalMinorVersion); + dev_dbg(dev, "%s - >> FW Versions Device %d.%d Driver %d.%d\n", + __func__, firmware_version->Ver_Major, + firmware_version->Ver_Minor, + OperationalMajorVersion, + OperationalMinorVersion); /* Check if we have an old version in the I2C and update if necessary */ if (download_cur_ver < download_new_ver) { - dbg("%s - Update I2C dld from %d.%d to %d.%d", - __func__, - firmware_version->Ver_Major, - firmware_version->Ver_Minor, - OperationalMajorVersion, - OperationalMinorVersion); + dev_dbg(dev, "%s - Update I2C dld from %d.%d to %d.%d\n", + __func__, + firmware_version->Ver_Major, + firmware_version->Ver_Minor, + OperationalMajorVersion, + OperationalMinorVersion); record = kmalloc(1, GFP_KERNEL); if (!record) { @@ -1196,9 +1189,7 @@ static int download_fw(struct edgeport_serial *serial) } if (*record != I2C_DESC_TYPE_FIRMWARE_BLANK) { - dev_err(dev, - "%s - error resetting device\n", - __func__); + dev_err(dev, "%s - error resetting device\n", __func__); kfree(record); kfree(firmware_version); kfree(rom_desc); @@ -1206,15 +1197,14 @@ static int download_fw(struct edgeport_serial *serial) return -ENODEV; } - dbg("%s - HARDWARE RESET", __func__); + dev_dbg(dev, "%s - HARDWARE RESET\n", __func__); /* Reset UMP -- Back to BOOT MODE */ status = ti_vsend_sync(serial->serial->dev, UMPC_HARDWARE_RESET, 0, 0, NULL, 0); - dbg("%s - HARDWARE RESET return %d", - __func__, status); + dev_dbg(dev, "%s - HARDWARE RESET return %d\n", __func__, status); /* return an error on purpose. */ kfree(record); @@ -1249,8 +1239,7 @@ static int download_fw(struct edgeport_serial *serial) return -ENOMEM; } - dbg("%s - Found Type BLANK FIRMWARE (Type F2) record", - __func__); + dev_dbg(dev, "%s - Found Type BLANK FIRMWARE (Type F2) record\n", __func__); /* * In order to update the I2C firmware we must change @@ -1292,7 +1281,7 @@ static int download_fw(struct edgeport_serial *serial) HEADER_SIZE, vheader); if (status) { - dbg("%s - can't read header back", __func__); + dev_dbg(dev, "%s - can't read header back\n", __func__); kfree(vheader); kfree(header); kfree(rom_desc); @@ -1300,8 +1289,7 @@ static int download_fw(struct edgeport_serial *serial) return status; } if (memcmp(vheader, header, HEADER_SIZE)) { - dbg("%s - write download record failed", - __func__); + dev_dbg(dev, "%s - write download record failed\n", __func__); kfree(vheader); kfree(header); kfree(rom_desc); @@ -1312,13 +1300,13 @@ static int download_fw(struct edgeport_serial *serial) kfree(vheader); kfree(header); - dbg("%s - Start firmware update", __func__); + dev_dbg(dev, "%s - Start firmware update\n", __func__); /* Tell firmware to copy download image into I2C */ status = ti_vsend_sync(serial->serial->dev, UMPC_COPY_DNLD_TO_I2C, 0, 0, NULL, 0); - dbg("%s - Update complete 0x%x", __func__, status); + dev_dbg(dev, "%s - Update complete 0x%x\n", __func__, status); if (status) { dev_err(dev, "%s - UMPC_COPY_DNLD_TO_I2C failed\n", @@ -1338,7 +1326,7 @@ static int download_fw(struct edgeport_serial *serial) /********************************************************************/ /* Boot Mode */ /********************************************************************/ - dbg("%s - RUNNING IN BOOT MODE", __func__); + dev_dbg(dev, "%s - RUNNING IN BOOT MODE\n", __func__); /* Configure the TI device so we can use the BULK pipes for download */ status = config_boot_dev(serial->serial->dev); @@ -1347,8 +1335,8 @@ static int download_fw(struct edgeport_serial *serial) if (le16_to_cpu(serial->serial->dev->descriptor.idVendor) != USB_VENDOR_ID_ION) { - dbg("%s - VID = 0x%x", __func__, - le16_to_cpu(serial->serial->dev->descriptor.idVendor)); + dev_dbg(dev, "%s - VID = 0x%x\n", __func__, + le16_to_cpu(serial->serial->dev->descriptor.idVendor)); serial->TI_I2C_Type = DTK_ADDR_SPACE_I2C_TYPE_II; goto stayinbootmode; } @@ -1385,8 +1373,8 @@ static int download_fw(struct edgeport_serial *serial) /* Check for version 2 */ if (!ignore_cpu_rev && ti_cpu_rev(ti_manuf_desc) < 2) { - dbg("%s - Wrong CPU Rev %d (Must be 2)", - __func__, ti_cpu_rev(ti_manuf_desc)); + dev_dbg(dev, "%s - Wrong CPU Rev %d (Must be 2)\n", + __func__, ti_cpu_rev(ti_manuf_desc)); kfree(ti_manuf_desc); goto stayinbootmode; } @@ -1442,23 +1430,20 @@ static int download_fw(struct edgeport_serial *serial) header->CheckSum = cs; /* Download the operational code */ - dbg("%s - Downloading operational code image (TI UMP)", - __func__); + dev_dbg(dev, "%s - Downloading operational code image (TI UMP)\n", __func__); status = download_code(serial, buffer, buffer_size); kfree(buffer); if (status) { - dbg("%s - Error downloading operational code image", - __func__); + dev_dbg(dev, "%s - Error downloading operational code image\n", __func__); return status; } /* Device will reboot */ serial->product_info.TiMode = TI_MODE_TRANSITIONING; - dbg("%s - Download successful -- Device rebooting...", - __func__); + dev_dbg(dev, "%s - Download successful -- Device rebooting...\n", __func__); /* return an error on purpose */ return -ENODEV; @@ -1466,7 +1451,7 @@ static int download_fw(struct edgeport_serial *serial) stayinbootmode: /* Eprom is invalid or blank stay in boot mode */ - dbg("%s - STAYING IN BOOT MODE", __func__); + dev_dbg(dev, "%s - STAYING IN BOOT MODE\n", __func__); serial->product_info.TiMode = TI_MODE_BOOT; return 0; @@ -1487,7 +1472,7 @@ static int restore_mcr(struct edgeport_port *port, __u8 mcr) { int status = 0; - dbg("%s - %x", __func__, mcr); + dev_dbg(&port->port->dev, "%s - %x\n", __func__, mcr); status = ti_do_config(port, UMPC_SET_CLR_DTR, mcr & MCR_DTR); if (status) @@ -1524,7 +1509,7 @@ static void handle_new_msr(struct edgeport_port *edge_port, __u8 msr) struct async_icount *icount; struct tty_struct *tty; - dbg("%s - %02x", __func__, msr); + dev_dbg(&edge_port->port->dev, "%s - %02x\n", __func__, msr); if (msr & (EDGEPORT_MSR_DELTA_CTS | EDGEPORT_MSR_DELTA_DSR | EDGEPORT_MSR_DELTA_RI | EDGEPORT_MSR_DELTA_CD)) { @@ -1566,7 +1551,7 @@ static void handle_new_lsr(struct edgeport_port *edge_port, int lsr_data, LSR_FRM_ERR | LSR_BREAK)); struct tty_struct *tty; - dbg("%s - %02x", __func__, new_lsr); + dev_dbg(&edge_port->port->dev, "%s - %02x\n", __func__, new_lsr); edge_port->shadow_lsr = lsr; @@ -1604,6 +1589,7 @@ static void edge_interrupt_callback(struct urb *urb) struct edgeport_serial *edge_serial = urb->context; struct usb_serial_port *port; struct edgeport_port *edge_port; + struct device *dev; unsigned char *data = urb->transfer_buffer; int length = urb->actual_length; int port_number; @@ -1613,8 +1599,6 @@ static void edge_interrupt_callback(struct urb *urb) __u8 msr; int status = urb->status; - dbg("%s", __func__); - switch (status) { case 0: /* success */ @@ -1623,7 +1607,7 @@ static void edge_interrupt_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: @@ -1633,27 +1617,26 @@ static void edge_interrupt_callback(struct urb *urb) } if (!length) { - dbg("%s - no data in urb", __func__); + dev_dbg(&urb->dev->dev, "%s - no data in urb\n", __func__); goto exit; } - usb_serial_debug_data(debug, &edge_serial->serial->dev->dev, - __func__, length, data); + dev = &edge_serial->serial->dev->dev; + usb_serial_debug_data(debug, dev, __func__, length, data); if (length != 2) { - dbg("%s - expecting packet of size 2, got %d", - __func__, length); + dev_dbg(dev, "%s - expecting packet of size 2, got %d\n", __func__, length); goto exit; } port_number = TIUMP_GET_PORT_FROM_CODE(data[0]); function = TIUMP_GET_FUNC_FROM_CODE(data[0]); - dbg("%s - port_number %d, function %d, info 0x%x", - __func__, port_number, function, data[1]); + dev_dbg(dev, "%s - port_number %d, function %d, info 0x%x\n", __func__, + port_number, function, data[1]); port = edge_serial->serial->port[port_number]; edge_port = usb_get_serial_port_data(port); if (!edge_port) { - dbg("%s - edge_port not found", __func__); + dev_dbg(dev, "%s - edge_port not found\n", __func__); return; } switch (function) { @@ -1662,13 +1645,13 @@ static void edge_interrupt_callback(struct urb *urb) if (lsr & UMP_UART_LSR_DATA_MASK) { /* Save the LSR event for bulk read completion routine */ - dbg("%s - LSR Event Port %u LSR Status = %02x", - __func__, port_number, lsr); + dev_dbg(dev, "%s - LSR Event Port %u LSR Status = %02x\n", + __func__, port_number, lsr); edge_port->lsr_event = 1; edge_port->lsr_mask = lsr; } else { - dbg("%s - ===== Port %d LSR Status = %02x ======", - __func__, port_number, lsr); + dev_dbg(dev, "%s - ===== Port %d LSR Status = %02x ======\n", + __func__, port_number, lsr); handle_new_lsr(edge_port, 0, lsr, 0); } break; @@ -1676,8 +1659,8 @@ static void edge_interrupt_callback(struct urb *urb) case TIUMP_INTERRUPT_CODE_MSR: /* MSR */ /* Copy MSR from UMP */ msr = data[1]; - dbg("%s - ===== Port %u MSR Status = %02x ======", - __func__, port_number, msr); + dev_dbg(dev, "%s - ===== Port %u MSR Status = %02x ======\n", + __func__, port_number, msr); handle_new_msr(edge_port, msr); break; @@ -1700,14 +1683,13 @@ exit: static void edge_bulk_in_callback(struct urb *urb) { struct edgeport_port *edge_port = urb->context; + struct device *dev = &edge_port->port->dev; unsigned char *data = urb->transfer_buffer; struct tty_struct *tty; int retval = 0; int port_number; int status = urb->status; - dbg("%s", __func__); - switch (status) { case 0: /* success */ @@ -1716,13 +1698,10 @@ static void edge_bulk_in_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", - __func__, status); + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: - dev_err(&urb->dev->dev, - "%s - nonzero read bulk status received: %d\n", - __func__, status); + dev_err(&urb->dev->dev, "%s - nonzero read bulk status received: %d\n", __func__, status); } if (status == -EPIPE) @@ -1737,8 +1716,8 @@ static void edge_bulk_in_callback(struct urb *urb) if (edge_port->lsr_event) { edge_port->lsr_event = 0; - dbg("%s ===== Port %u LSR Status = %02x, Data = %02x ======", - __func__, port_number, edge_port->lsr_mask, *data); + dev_dbg(dev, "%s ===== Port %u LSR Status = %02x, Data = %02x ======\n", + __func__, port_number, edge_port->lsr_mask, *data); handle_new_lsr(edge_port, 1, edge_port->lsr_mask, *data); /* Adjust buffer length/pointer */ --urb->actual_length; @@ -1747,14 +1726,12 @@ static void edge_bulk_in_callback(struct urb *urb) tty = tty_port_tty_get(&edge_port->port->port); if (tty && urb->actual_length) { - usb_serial_debug_data(debug, &edge_port->port->dev, - __func__, urb->actual_length, data); + usb_serial_debug_data(debug, dev, __func__, urb->actual_length, data); if (edge_port->close_pending) - dbg("%s - close pending, dropping data on the floor", + dev_dbg(dev, "%s - close pending, dropping data on the floor\n", __func__); else - edge_tty_recv(&edge_port->port->dev, tty, data, - urb->actual_length); + edge_tty_recv(dev, tty, data, urb->actual_length); edge_port->icount.rx += urb->actual_length; } tty_kref_put(tty); @@ -1769,9 +1746,7 @@ exit: spin_unlock(&edge_port->ep_lock); if (retval) - dev_err(&urb->dev->dev, - "%s - usb_submit_urb failed with result %d\n", - __func__, retval); + dev_err(dev, "%s - usb_submit_urb failed with result %d\n", __func__, retval); } static void edge_tty_recv(struct device *dev, struct tty_struct *tty, @@ -1793,8 +1768,6 @@ static void edge_bulk_out_callback(struct urb *urb) int status = urb->status; struct tty_struct *tty; - dbg("%s - port %d", __func__, port->number); - edge_port->ep_write_urb_in_use = 0; switch (status) { @@ -1805,7 +1778,7 @@ static void edge_bulk_out_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* this urb is terminated, clean up */ - dbg("%s - urb shutting down with status: %d", + dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d\n", __func__, status); return; default: @@ -1830,8 +1803,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) u16 open_settings; u8 transaction_timeout; - dbg("%s - port %d", __func__, port->number); - if (edge_port == NULL) return -ENODEV; @@ -1850,9 +1821,8 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) return -ENODEV; } - dbg("%s - port_number = %d, uart_base = %04x, dma_address = %04x", - __func__, port_number, edge_port->uart_base, - edge_port->dma_address); + dev_dbg(&port->dev, "%s - port_number = %d, uart_base = %04x, dma_address = %04x\n", + __func__, port_number, edge_port->uart_base, edge_port->dma_address); dev = port->serial->dev; @@ -1885,7 +1855,7 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) UMP_PIPE_TRANS_TIMEOUT_ENA | (transaction_timeout << 2)); - dbg("%s - Sending UMPC_OPEN_PORT", __func__); + dev_dbg(&port->dev, "%s - Sending UMPC_OPEN_PORT\n", __func__); /* Tell TI to open and start the port */ status = send_cmd(dev, UMPC_OPEN_PORT, @@ -1924,11 +1894,11 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) return status; } - dbg("ShadowMSR 0x%X", edge_port->shadow_msr); + dev_dbg(&port->dev, "ShadowMSR 0x%X\n", edge_port->shadow_msr); /* Set Initial MCR */ edge_port->shadow_mcr = MCR_RTS | MCR_DTR; - dbg("ShadowMCR 0x%X", edge_port->shadow_mcr); + dev_dbg(&port->dev, "ShadowMCR 0x%X\n", edge_port->shadow_mcr); edge_serial = edge_port->edge_serial; if (mutex_lock_interruptible(&edge_serial->es_lock)) @@ -1980,8 +1950,6 @@ static int edge_open(struct tty_struct *tty, struct usb_serial_port *port) ++edge_serial->num_ports_open; - dbg("%s - exited", __func__); - goto release_es_lock; unlink_int_urb: @@ -1999,8 +1967,6 @@ static void edge_close(struct usb_serial_port *port) struct usb_serial *serial = port->serial; int port_number; - dbg("%s - port %d", __func__, port->number); - edge_serial = usb_get_serial_data(port->serial); edge_port = usb_get_serial_port_data(port); if (edge_serial == NULL || edge_port == NULL) @@ -2019,7 +1985,7 @@ static void edge_close(struct usb_serial_port *port) /* assuming we can still talk to the device, * send a close port command to it */ - dbg("%s - send umpc_close_port", __func__); + dev_dbg(&port->dev, "%s - send umpc_close_port\n", __func__); port_number = port->number - port->serial->minor; mutex_lock(&serial->disc_mutex); @@ -2042,8 +2008,6 @@ static void edge_close(struct usb_serial_port *port) } mutex_unlock(&edge_serial->es_lock); edge_port->close_pending = 0; - - dbg("%s - exited", __func__); } static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, @@ -2051,10 +2015,8 @@ static int edge_write(struct tty_struct *tty, struct usb_serial_port *port, { struct edgeport_port *edge_port = usb_get_serial_port_data(port); - dbg("%s - port %d", __func__, port->number); - if (count == 0) { - dbg("%s - write request of 0 bytes", __func__); + dev_dbg(&port->dev, "%s - write request of 0 bytes\n", __func__); return 0; } @@ -2077,9 +2039,6 @@ static void edge_send(struct tty_struct *tty) struct edgeport_port *edge_port = usb_get_serial_port_data(port); unsigned long flags; - - dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&edge_port->ep_lock, flags); if (edge_port->ep_write_urb_in_use) { @@ -2130,8 +2089,6 @@ static int edge_write_room(struct tty_struct *tty) int room = 0; unsigned long flags; - dbg("%s - port %d", __func__, port->number); - if (edge_port == NULL) return 0; if (edge_port->close_pending == 1) @@ -2141,7 +2098,7 @@ static int edge_write_room(struct tty_struct *tty) room = kfifo_avail(&edge_port->write_fifo); spin_unlock_irqrestore(&edge_port->ep_lock, flags); - dbg("%s - returns %d", __func__, room); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, room); return room; } @@ -2152,8 +2109,6 @@ static int edge_chars_in_buffer(struct tty_struct *tty) int chars = 0; unsigned long flags; - dbg("%s - port %d", __func__, port->number); - if (edge_port == NULL) return 0; if (edge_port->close_pending == 1) @@ -2163,7 +2118,7 @@ static int edge_chars_in_buffer(struct tty_struct *tty) chars = kfifo_len(&edge_port->write_fifo); spin_unlock_irqrestore(&edge_port->ep_lock, flags); - dbg("%s - returns %d", __func__, chars); + dev_dbg(&port->dev, "%s - returns %d\n", __func__, chars); return chars; } @@ -2173,8 +2128,6 @@ static void edge_throttle(struct tty_struct *tty) struct edgeport_port *edge_port = usb_get_serial_port_data(port); int status; - dbg("%s - port %d", __func__, port->number); - if (edge_port == NULL) return; @@ -2200,8 +2153,6 @@ static void edge_unthrottle(struct tty_struct *tty) struct edgeport_port *edge_port = usb_get_serial_port_data(port); int status; - dbg("%s - port %d", __func__, port->number); - if (edge_port == NULL) return; @@ -2261,6 +2212,7 @@ static int restart_read(struct edgeport_port *edge_port) static void change_port_settings(struct tty_struct *tty, struct edgeport_port *edge_port, struct ktermios *old_termios) { + struct device *dev = &edge_port->port->dev; struct ump_uart_config *config; int baud; unsigned cflag; @@ -2268,13 +2220,12 @@ static void change_port_settings(struct tty_struct *tty, int port_number = edge_port->port->number - edge_port->port->serial->minor; - dbg("%s - port %d", __func__, edge_port->port->number); + dev_dbg(dev, "%s - port %d\n", __func__, edge_port->port->number); config = kmalloc (sizeof (*config), GFP_KERNEL); if (!config) { *tty->termios = *old_termios; - dev_err(&edge_port->port->dev, "%s - out of memory\n", - __func__); + dev_err(dev, "%s - out of memory\n", __func__); return; } @@ -2290,20 +2241,20 @@ static void change_port_settings(struct tty_struct *tty, switch (cflag & CSIZE) { case CS5: config->bDataBits = UMP_UART_CHAR5BITS; - dbg("%s - data bits = 5", __func__); + dev_dbg(dev, "%s - data bits = 5\n", __func__); break; case CS6: config->bDataBits = UMP_UART_CHAR6BITS; - dbg("%s - data bits = 6", __func__); + dev_dbg(dev, "%s - data bits = 6\n", __func__); break; case CS7: config->bDataBits = UMP_UART_CHAR7BITS; - dbg("%s - data bits = 7", __func__); + dev_dbg(dev, "%s - data bits = 7\n", __func__); break; default: case CS8: config->bDataBits = UMP_UART_CHAR8BITS; - dbg("%s - data bits = 8", __func__); + dev_dbg(dev, "%s - data bits = 8\n", __func__); break; } @@ -2311,32 +2262,32 @@ static void change_port_settings(struct tty_struct *tty, if (cflag & PARODD) { config->wFlags |= UMP_MASK_UART_FLAGS_PARITY; config->bParity = UMP_UART_ODDPARITY; - dbg("%s - parity = odd", __func__); + dev_dbg(dev, "%s - parity = odd\n", __func__); } else { config->wFlags |= UMP_MASK_UART_FLAGS_PARITY; config->bParity = UMP_UART_EVENPARITY; - dbg("%s - parity = even", __func__); + dev_dbg(dev, "%s - parity = even\n", __func__); } } else { config->bParity = UMP_UART_NOPARITY; - dbg("%s - parity = none", __func__); + dev_dbg(dev, "%s - parity = none\n", __func__); } if (cflag & CSTOPB) { config->bStopBits = UMP_UART_STOPBIT2; - dbg("%s - stop bits = 2", __func__); + dev_dbg(dev, "%s - stop bits = 2\n", __func__); } else { config->bStopBits = UMP_UART_STOPBIT1; - dbg("%s - stop bits = 1", __func__); + dev_dbg(dev, "%s - stop bits = 1\n", __func__); } /* figure out the flow control settings */ if (cflag & CRTSCTS) { config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X_CTS_FLOW; config->wFlags |= UMP_MASK_UART_FLAGS_RTS_FLOW; - dbg("%s - RTS/CTS is enabled", __func__); + dev_dbg(dev, "%s - RTS/CTS is enabled\n", __func__); } else { - dbg("%s - RTS/CTS is disabled", __func__); + dev_dbg(dev, "%s - RTS/CTS is disabled\n", __func__); tty->hw_stopped = 0; restart_read(edge_port); } @@ -2349,18 +2300,18 @@ static void change_port_settings(struct tty_struct *tty, /* if we are implementing INBOUND XON/XOFF */ if (I_IXOFF(tty)) { config->wFlags |= UMP_MASK_UART_FLAGS_IN_X; - dbg("%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", - __func__, config->cXon, config->cXoff); + dev_dbg(dev, "%s - INBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n", + __func__, config->cXon, config->cXoff); } else - dbg("%s - INBOUND XON/XOFF is disabled", __func__); + dev_dbg(dev, "%s - INBOUND XON/XOFF is disabled\n", __func__); /* if we are implementing OUTBOUND XON/XOFF */ if (I_IXON(tty)) { config->wFlags |= UMP_MASK_UART_FLAGS_OUT_X; - dbg("%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x", - __func__, config->cXon, config->cXoff); + dev_dbg(dev, "%s - OUTBOUND XON/XOFF is enabled, XON = %2x, XOFF = %2x\n", + __func__, config->cXon, config->cXoff); } else - dbg("%s - OUTBOUND XON/XOFF is disabled", __func__); + dev_dbg(dev, "%s - OUTBOUND XON/XOFF is disabled\n", __func__); tty->termios->c_cflag &= ~CMSPAR; @@ -2377,17 +2328,16 @@ static void change_port_settings(struct tty_struct *tty, /* FIXME: Recompute actual baud from divisor here */ - dbg("%s - baud rate = %d, wBaudRate = %d", __func__, baud, - config->wBaudRate); + dev_dbg(dev, "%s - baud rate = %d, wBaudRate = %d\n", __func__, baud, config->wBaudRate); - dbg("wBaudRate: %d", (int)(461550L / config->wBaudRate)); - dbg("wFlags: 0x%x", config->wFlags); - dbg("bDataBits: %d", config->bDataBits); - dbg("bParity: %d", config->bParity); - dbg("bStopBits: %d", config->bStopBits); - dbg("cXon: %d", config->cXon); - dbg("cXoff: %d", config->cXoff); - dbg("bUartMode: %d", config->bUartMode); + dev_dbg(dev, "wBaudRate: %d\n", (int)(461550L / config->wBaudRate)); + dev_dbg(dev, "wFlags: 0x%x\n", config->wFlags); + dev_dbg(dev, "bDataBits: %d\n", config->bDataBits); + dev_dbg(dev, "bParity: %d\n", config->bParity); + dev_dbg(dev, "bStopBits: %d\n", config->bStopBits); + dev_dbg(dev, "cXon: %d\n", config->cXon); + dev_dbg(dev, "cXoff: %d\n", config->cXoff); + dev_dbg(dev, "bUartMode: %d\n", config->bUartMode); /* move the word values into big endian mode */ cpu_to_be16s(&config->wFlags); @@ -2397,8 +2347,8 @@ static void change_port_settings(struct tty_struct *tty, (__u8)(UMPM_UART1_PORT + port_number), 0, (__u8 *)config, sizeof(*config)); if (status) - dbg("%s - error %d when trying to write config to device", - __func__, status); + dev_dbg(dev, "%s - error %d when trying to write config to device\n", + __func__, status); kfree(config); } @@ -2410,11 +2360,11 @@ static void edge_set_termios(struct tty_struct *tty, cflag = tty->termios->c_cflag; - dbg("%s - clfag %08x iflag %08x", __func__, - tty->termios->c_cflag, tty->termios->c_iflag); - dbg("%s - old clfag %08x old iflag %08x", __func__, - old_termios->c_cflag, old_termios->c_iflag); - dbg("%s - port %d", __func__, port->number); + dev_dbg(&port->dev, "%s - clfag %08x iflag %08x\n", __func__, + tty->termios->c_cflag, tty->termios->c_iflag); + dev_dbg(&port->dev, "%s - old clfag %08x old iflag %08x\n", __func__, + old_termios->c_cflag, old_termios->c_iflag); + dev_dbg(&port->dev, "%s - port %d\n", __func__, port->number); if (edge_port == NULL) return; @@ -2430,8 +2380,6 @@ static int edge_tiocmset(struct tty_struct *tty, unsigned int mcr; unsigned long flags; - dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&edge_port->ep_lock, flags); mcr = edge_port->shadow_mcr; if (set & TIOCM_RTS) @@ -2464,8 +2412,6 @@ static int edge_tiocmget(struct tty_struct *tty) unsigned int mcr; unsigned long flags; - dbg("%s - port %d", __func__, port->number); - spin_lock_irqsave(&edge_port->ep_lock, flags); msr = edge_port->shadow_msr; @@ -2478,7 +2424,7 @@ static int edge_tiocmget(struct tty_struct *tty) | ((msr & EDGEPORT_MSR_DSR) ? TIOCM_DSR: 0); /* 0x100 */ - dbg("%s -- %x", __func__, result); + dev_dbg(&port->dev, "%s -- %x\n", __func__, result); spin_unlock_irqrestore(&edge_port->ep_lock, flags); return result; @@ -2538,15 +2484,15 @@ static int edge_ioctl(struct tty_struct *tty, struct async_icount cnow; struct async_icount cprev; - dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd); + dev_dbg(&port->dev, "%s - port %d, cmd = 0x%x\n", __func__, port->number, cmd); switch (cmd) { case TIOCGSERIAL: - dbg("%s - (%d) TIOCGSERIAL", __func__, port->number); + dev_dbg(&port->dev, "%s - TIOCGSERIAL\n", __func__); return get_serial_info(edge_port, (struct serial_struct __user *) arg); case TIOCMIWAIT: - dbg("%s - (%d) TIOCMIWAIT", __func__, port->number); + dev_dbg(&port->dev, "%s - TIOCMIWAIT\n", __func__); cprev = edge_port->icount; while (1) { interruptible_sleep_on(&edge_port->delta_msr_wait); @@ -2578,8 +2524,6 @@ static void edge_break(struct tty_struct *tty, int break_state) int status; int bv = 0; /* Off */ - dbg("%s - state = %d", __func__, break_state); - /* chase the port close */ chase_port(edge_port, 0, 0); @@ -2587,8 +2531,8 @@ static void edge_break(struct tty_struct *tty, int break_state) bv = 1; /* On */ status = ti_do_config(edge_port, UMPC_SET_CLR_BREAK, bv); if (status) - dbg("%s - error %d sending break set/clear command.", - __func__, status); + dev_dbg(&port->dev, "%s - error %d sending break set/clear command.\n", + __func__, status); } static int edge_startup(struct usb_serial *serial) @@ -2655,7 +2599,6 @@ cleanup: static void edge_disconnect(struct usb_serial *serial) { - dbg("%s", __func__); } static void edge_release(struct usb_serial *serial) @@ -2663,8 +2606,6 @@ static void edge_release(struct usb_serial *serial) int i; struct edgeport_port *edge_port; - dbg("%s", __func__); - for (i = 0; i < serial->num_ports; ++i) { edge_port = usb_get_serial_port_data(serial->port[i]); kfifo_free(&edge_port->write_fifo); @@ -2692,7 +2633,7 @@ static ssize_t store_uart_mode(struct device *dev, struct edgeport_port *edge_port = usb_get_serial_port_data(port); unsigned int v = simple_strtoul(valbuf, NULL, 0); - dbg("%s: setting uart_mode = %d", __func__, v); + dev_dbg(dev, "%s: setting uart_mode = %d\n", __func__, v); if (v < 256) edge_port->bUartMode = v; |