diff options
| author | Arnd Bergmann <arnd@arndb.de> | 2014-11-28 14:01:57 (GMT) |
|---|---|---|
| committer | Arnd Bergmann <arnd@arndb.de> | 2014-11-28 14:01:57 (GMT) |
| commit | 6b7f0570b1f0a7f65d90d6b5d4ddf84c2a13e91b (patch) | |
| tree | f685bc0bda07a9036f76c4e9c342eacb6354fe8a | |
| parent | ea4409cc44e8f0f36182fcc22eb48b15ed61dd16 (diff) | |
| parent | 96acf9dfe1ba59e99eafcf26478118edd195d924 (diff) | |
| download | linux-6b7f0570b1f0a7f65d90d6b5d4ddf84c2a13e91b.tar.xz | |
Merge tag 'imx-dt-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt
Pull "The i.MX device tree changes for 3.19" from Shawn Guo:
- Device additions for board vf610-colibri, pwm, backlight, I2C, RTC,
ADC etc.
- Update i.MX6 phyFLEX board to include PCIe, CAN and audio support
- Improve SSI clocks description for i.MX5 platforms
- Add ENET2 support for imx6sx-sdb board
- Add device tree source for LS1021A SoC, board QDS and TWR
- Enable cpufreq support for i.MX53
- Enable VPU device support for i.MX6QDL
- Enable poweroff support for i.MX6 SoCs
- Add support for TBS2910 Matrix ARM mini PC which is built on i.MX6Q
- Create generic base device trees for Vybrid and add support for
Colibri VF50
Note: the change set is built on top of imx-soc-3.19 to resolve the
dependency that "ARM: dts: imx53: add cpufreq-dt support" uses the
clock define IMX5_CLK_ARM that is added by "ARM: imx53: clk: add ARM
clock".
* tag 'imx-dt-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (51 commits)
ARM: dts: imx6q-tbs2910: Enable snvs-poweroff
ARM: dts: imx6: add pm_power_off support for i.mx6 chips
ARM: dts: vf-colibri: add USB regulators
ARM: dts: imx6: phyFLEX: Add CAN support
ARM: dts: imx6: phyFLEX: Add PCIe
ARM: dts: imx6: phyFLEX: Set correct interrupt for pmic
ARM: dts: imx6: phyFLEX: Enable gpmi in module file
ARM: dts: imx6: phyFLEX: set nodes in alphabetical order
ARM: dts: vf-colibri-eval-v3.dts: Enable ST-M41T0M6 RTC
ARM: dts: vf-colibri: Add I2C support
ARM: dts: imx6qdl: Enable CODA960 VPU
ARM: dts: imx6q-tbs2910: Remove unneeded 'fsl,mode' property
ARM: dts: vf610: enable USB misc/phy nodes where necessary
ARM: dts: vf610: use new GPIO support
ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards
ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02
ARM: dts: vf500-colibri: add Colibri VF50 support
ARM: dts: vf610: create generic base device trees
ARM: dts: vf610: assign oscillator to clock module
dt-bindings: arm: add Freescale LS1021A SoC device tree binding
...
Signed-off-by; Arnd Bergmann <arnd@arndb.de>
56 files changed, 3190 insertions, 746 deletions
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt index e935d7d..4e8b7df 100644 --- a/Documentation/devicetree/bindings/arm/fsl.txt +++ b/Documentation/devicetree/bindings/arm/fsl.txt @@ -74,3 +74,41 @@ Required root node properties: i.MX6q generic board Required root node properties: - compatible = "fsl,imx6q"; + + +Freescale LS1021A Platform Device Tree Bindings +------------------------------------------------ + +Required root node compatible properties: + - compatible = "fsl,ls1021a"; + +Freescale LS1021A SoC-specific Device Tree Bindings +------------------------------------------- + +Freescale SCFG + SCFG is the supplemental configuration unit, that provides SoC specific +configuration and status registers for the chip. Such as getting PEX port +status. + Required properties: + - compatible: should be "fsl,ls1021a-scfg" + - reg: should contain base address and length of SCFG memory-mapped registers + +Example: + scfg: scfg@1570000 { + compatible = "fsl,ls1021a-scfg"; + reg = <0x0 0x1570000 0x0 0x10000>; + }; + +Freescale DCFG + DCFG is the device configuration unit, that provides general purpose +configuration and status for the device. Such as setting the secondary +core start address and release the secondary core from holdoff and startup. + Required properties: + - compatible: should be "fsl,ls1021a-dcfg" + - reg : should contain base address and length of DCFG memory-mapped registers + +Example: + dcfg: dcfg@1ee0000 { + compatible = "fsl,ls1021a-dcfg"; + reg = <0x0 0x1ee0000 0x0 0x10000>; + }; diff --git a/Documentation/devicetree/bindings/clock/vf610-clock.txt b/Documentation/devicetree/bindings/clock/vf610-clock.txt index c80863d..63f9f1a 100644 --- a/Documentation/devicetree/bindings/clock/vf610-clock.txt +++ b/Documentation/devicetree/bindings/clock/vf610-clock.txt @@ -5,6 +5,19 @@ Required properties: - reg: Address and length of the register set - #clock-cells: Should be <1> +Optional properties: +- clocks: list of clock identifiers which are external input clocks to the + given clock controller. Please refer the next section to find + the input clocks for a given controller. +- clock-names: list of names of clocks which are exteral input clocks to the + given clock controller. + +Input clocks for top clock controller: + - sxosc (external crystal oscillator 32KHz, recommended) + - fxosc (external crystal oscillator 24MHz, recommended) + - audio_ext + - enet_ext + The clock consumer should specify the desired clock by having the clock ID in its "clocks" phandle cell. See include/dt-bindings/clock/vf610-clock.h for the full list of VF610 clock IDs. @@ -15,6 +28,8 @@ clks: ccm@4006b000 { compatible = "fsl,vf610-ccm"; reg = <0x4006b000 0x1000>; #clock-cells = <1>; + clocks = <&sxosc>, <&fxosc>; + clock-names = "sxosc", "fxosc"; }; uart1: serial@40028000 { diff --git a/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt b/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt new file mode 100644 index 0000000..dc7c9ba --- /dev/null +++ b/Documentation/devicetree/bindings/power_supply/imx-snvs-poweroff.txt @@ -0,0 +1,23 @@ +i.mx6 Poweroff Driver + +SNVS_LPCR in SNVS module can power off the whole system by pull +PMIC_ON_REQ low if PMIC_ON_REQ is connected with external PMIC. +If you don't want to use PMIC_ON_REQ as power on/off control, +please set status='disabled' to disable this driver. + +Required Properties: +-compatible: "fsl,sec-v4.0-poweroff" +-reg: Specifies the physical address of the SNVS_LPCR register + +Example: + snvs@020cc000 { + compatible = "fsl,sec-v4.0-mon", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x020cc000 0x4000>; + ..... + snvs_poweroff: snvs-poweroff@38 { + compatible = "fsl,sec-v4.0-poweroff"; + reg = <0x38 0x4>; + }; + } diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index bfbd93e..8c4a0db0 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -147,6 +147,7 @@ st STMicroelectronics ste ST-Ericsson stericsson ST-Ericsson synology Synology, Inc. +tbs TBS Technologies thine THine Electronics, Inc. ti Texas Instruments tlm Trusted Logic Mobility diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index f8d11c7..cd24e2b 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -248,6 +248,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-sabrelite.dtb \ imx6q-sabresd.dtb \ imx6q-sbc6x.dtb \ + imx6q-tbs2910.dtb \ imx6q-udoo.dtb \ imx6q-wandboard.dtb \ imx6q-wandboard-revb1.dtb \ @@ -258,6 +259,9 @@ dtb-$(CONFIG_ARCH_MXC) += \ imx6q-tx6q-1110.dtb \ imx6sl-evk.dtb \ imx6sx-sdb.dtb \ + ls1021a-qds.dtb \ + ls1021a-twr.dtb \ + vf500-colibri-eval-v3.dtb \ vf610-colibri-eval-v3.dtb \ vf610-cosmic.dtb \ vf610-twr.dtb diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 92660e1..c0116cf 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -214,7 +214,9 @@ compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x70014000 0x4000>; interrupts = <30>; - clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>; + clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>, + <&clks IMX5_CLK_SSI2_ROOT_GATE>; + clock-names = "ipg", "baud"; dmas = <&sdma 24 1 0>, <&sdma 25 1 0>; dma-names = "rx", "tx"; @@ -504,7 +506,9 @@ compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x83fcc000 0x4000>; interrupts = <29>; - clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>; + clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>, + <&clks IMX5_CLK_SSI1_ROOT_GATE>; + clock-names = "ipg", "baud"; dmas = <&sdma 28 0 0>, <&sdma 29 0 0>; dma-names = "rx", "tx"; @@ -560,7 +564,9 @@ compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x83fe8000 0x4000>; interrupts = <96>; - clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>; + clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>, + <&clks IMX5_CLK_SSI3_ROOT_GATE>; + clock-names = "ipg", "baud"; dmas = <&sdma 46 0 0>, <&sdma 47 0 0>; dma-names = "rx", "tx"; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index f91725b..a30bddf 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -46,10 +46,21 @@ cpus { #address-cells = <1>; #size-cells = <0>; - cpu@0 { + cpu0: cpu@0 { device_type = "cpu"; compatible = "arm,cortex-a8"; reg = <0x0>; + clocks = <&clks IMX5_CLK_ARM>; + clock-latency = <61036>; + voltage-tolerance = <5>; + operating-points = < + /* kHz */ + 166666 850000 + 400000 900000 + 800000 1050000 + 1000000 1200000 + 1200000 1300000 + >; }; }; @@ -227,7 +238,9 @@ "fsl,imx21-ssi"; reg = <0x50014000 0x4000>; interrupts = <30>; - clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>; + clocks = <&clks IMX5_CLK_SSI2_IPG_GATE>, + <&clks IMX5_CLK_SSI2_ROOT_GATE>; + clock-names = "ipg", "baud"; dmas = <&sdma 24 1 0>, <&sdma 25 1 0>; dma-names = "rx", "tx"; @@ -675,7 +688,9 @@ "fsl,imx21-ssi"; reg = <0x63fcc000 0x4000>; interrupts = <29>; - clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>; + clocks = <&clks IMX5_CLK_SSI1_IPG_GATE>, + <&clks IMX5_CLK_SSI1_ROOT_GATE>; + clock-names = "ipg", "baud"; dmas = <&sdma 28 0 0>, <&sdma 29 0 0>; dma-names = "rx", "tx"; @@ -703,7 +718,9 @@ "fsl,imx21-ssi"; reg = <0x63fe8000 0x4000>; interrupts = <96>; - clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>; + clocks = <&clks IMX5_CLK_SSI3_IPG_GATE>, + <&clks IMX5_CLK_SSI3_ROOT_GATE>; + clock-names = "ipg", "baud"; dmas = <&sdma 46 0 0>, <&sdma 47 0 0>; dma-names = "rx", "tx"; diff --git a/arch/arm/boot/dts/imx6dl.dtsi b/arch/arm/boot/dts/imx6dl.dtsi index b453e0e..1ac2fe7 100644 --- a/arch/arm/boot/dts/imx6dl.dtsi +++ b/arch/arm/boot/dts/imx6dl.dtsi @@ -13,6 +13,10 @@ #include "imx6qdl.dtsi" / { + aliases { + i2c3 = &i2c4; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -114,3 +118,7 @@ "di0_sel", "di1_sel", "di0", "di1"; }; + +&vpu { + compatible = "fsl,imx6dl-vpu", "cnm,coda960"; +}; diff --git a/arch/arm/boot/dts/imx6q-tbs2910.dts b/arch/arm/boot/dts/imx6q-tbs2910.dts new file mode 100644 index 0000000..a43abfa --- /dev/null +++ b/arch/arm/boot/dts/imx6q-tbs2910.dts @@ -0,0 +1,432 @@ +/* + * Copyright 2014 Soeren Moch <smoch@web.de> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; + +#include "imx6q.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> + +/ { + model = "TBS2910 Matrix ARM mini PC"; + compatible = "tbs,imx6q-tbs2910", "fsl,imx6q"; + + chosen { + stdout-path = &uart1; + }; + + memory { + reg = <0x10000000 0x80000000>; + }; + + fan { + compatible = "gpio-fan"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_fan>; + gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>; + gpio-fan,speed-map = <0 0 + 3000 1>; + }; + + ir_recv { + compatible = "gpio-ir-receiver"; + gpios = <&gpio3 18 GPIO_ACTIVE_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ir>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpio_leds>; + + blue { + label = "blue_status_led"; + gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + default-state = "keep"; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + reg_2p5v: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "2P5V"; + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <2500000>; + }; + + reg_3p3v: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "3P3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reg_5p0v: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "5P0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + }; + + sound-sgtl5000 { + audio-codec = <&sgtl5000>; + audio-routing = + "MIC_IN", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HP_OUT"; + compatible = "fsl,imx-audio-sgtl5000"; + model = "On-board Codec"; + mux-ext-port = <3>; + mux-int-port = <1>; + ssi-controller = <&ssi1>; + }; + + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "On-board SPDIF"; + spdif-controller = <&spdif>; + spdif-out; + }; +}; + +&audmux { + status = "okay"; +}; + +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio1 25 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&hdmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_hdmi>; + ddc-i2c-bus = <&i2c2>; + status = "okay"; +}; + +&i2c1 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; + status = "okay"; + + sgtl5000: sgtl5000@0a { + clocks = <&clks 201>; + compatible = "fsl,sgtl5000"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sgtl5000>; + reg = <0x0a>; + VDDA-supply = <®_2p5v>; + VDDIO-supply = <®_3p3v>; + }; +}; + +&i2c2 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + status = "okay"; +}; + +&i2c3 { + clock-frequency = <100000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + status = "okay"; + + rtc: ds1307@68 { + compatible = "dallas,ds1307"; + reg = <0x68>; + }; +}; + +&pcie { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>; + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&snvs_poweroff { + status = "okay"; +}; + +&spdif { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_spdif>; + status = "okay"; +}; + +&ssi1 { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; + status = "okay"; +}; + +&usbh1 { + vbus-supply = <®_5p0v>; + status = "okay"; +}; + +&usbotg { + vbus-supply = <®_5p0v>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbotg>; + disable-over-current; + status = "okay"; +}; + +&usdhc2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc2>; + bus-width = <4>; + cd-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc3>; + bus-width = <4>; + cd-gpios = <&gpio2 0 GPIO_ACTIVE_HIGH>; + wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; + vmmc-supply = <®_3p3v>; + status = "okay"; +}; + +&usdhc4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usdhc4>; + bus-width = <8>; + non-removable; + no-1-8-v; + status = "okay"; +}; + +&iomuxc { + imx6q-tbs2910 { + pinctrl_enet: enetgrp { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b0b0 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b0b0 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b0b0 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b0b0 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b0b0 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b0b0 + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0 + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b0b0 + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b0b0 + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b0b0 + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b0b0 + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b0b0 + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b0b0 + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8 + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x1b059 + >; + }; + + pinctrl_hdmi: hdmigrp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__HDMI_TX_CEC_LINE 0x1f8b0 + >; + }; + + pinctrl_i2c1: i2c1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT9__I2C1_SCL 0x4001b8b1 + MX6QDL_PAD_CSI0_DAT8__I2C1_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_ir: irgrp { + fsl,pins = < + MX6QDL_PAD_EIM_D18__GPIO3_IO18 0x17059 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = < + MX6QDL_PAD_GPIO_17__GPIO7_IO12 0x17059 + >; + }; + + pinctrl_sgtl5000: sgtl5000grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT7__AUD3_RXD 0x130b0 + MX6QDL_PAD_CSI0_DAT4__AUD3_TXC 0x130b0 + MX6QDL_PAD_CSI0_DAT5__AUD3_TXD 0x110b0 + MX6QDL_PAD_CSI0_DAT6__AUD3_TXFS 0x130b0 + MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 + >; + }; + + pinctrl_spdif: spdifgrp { + fsl,pins = <MX6QDL_PAD_GPIO_19__SPDIF_OUT 0x13091 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1 + MX6QDL_PAD_CSI0_DAT11__UART1_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + MX6QDL_PAD_EIM_D26__UART2_TX_DATA 0x1b0b1 + MX6QDL_PAD_EIM_D27__UART2_RX_DATA 0x1b0b1 + >; + }; + + pinctrl_usbotg: usbotggrp { + fsl,pins = < + MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059 + >; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = < + MX6QDL_PAD_SD2_CMD__SD2_CMD 0x17059 + MX6QDL_PAD_SD2_CLK__SD2_CLK 0x10059 + MX6QDL_PAD_SD2_DAT0__SD2_DATA0 0x17059 + MX6QDL_PAD_SD2_DAT1__SD2_DATA1 0x17059 + MX6QDL_PAD_SD2_DAT2__SD2_DATA2 0x17059 + MX6QDL_PAD_SD2_DAT3__SD2_DATA3 0x17059 + MX6QDL_PAD_NANDF_D2__GPIO2_IO02 0x17059 + >; + }; + + pinctrl_usdhc3: usdhc3grp { + fsl,pins = < + MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059 + MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059 + MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059 + MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059 + MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059 + MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059 + MX6QDL_PAD_NANDF_D0__GPIO2_IO00 0x17059 + MX6QDL_PAD_NANDF_D1__GPIO2_IO01 0x17059 + >; + }; + + pinctrl_usdhc4: usdhc4grp { + fsl,pins = < + MX6QDL_PAD_SD4_CMD__SD4_CMD 0x17059 + MX6QDL_PAD_SD4_CLK__SD4_CLK 0x10059 + MX6QDL_PAD_SD4_DAT0__SD4_DATA0 0x17059 + MX6QDL_PAD_SD4_DAT1__SD4_DATA1 0x17059 + MX6QDL_PAD_SD4_DAT2__SD4_DATA2 0x17059 + MX6QDL_PAD_SD4_DAT3__SD4_DATA3 0x17059 + MX6QDL_PAD_SD4_DAT4__SD4_DATA4 0x17059 + MX6QDL_PAD_SD4_DAT5__SD4_DATA5 0x17059 + MX6QDL_PAD_SD4_DAT6__SD4_DATA6 0x17059 + MX6QDL_PAD_SD4_DAT7__SD4_DATA7 0x17059 + >; + }; + }; + + gpio_fan { + pinctrl_gpio_fan: gpiofangrp { + fsl,pins = < + MX6QDL_PAD_EIM_D28__GPIO3_IO28 0x130b1 + >; + }; + }; + + gpio_leds { + pinctrl_gpio_leds: gpioledsgrp { + fsl,pins = < + MX6QDL_PAD_GPIO_2__GPIO1_IO02 0x130b1 + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/imx6q.dtsi b/arch/arm/boot/dts/imx6q.dtsi index e9f3646..85f72e6 100644 --- a/arch/arm/boot/dts/imx6q.dtsi +++ b/arch/arm/boot/dts/imx6q.dtsi @@ -308,3 +308,7 @@ }; }; }; + +&vpu { + compatible = "fsl,imx6q-vpu", "cnm,coda960"; +}; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi index 5847212..585b4f6 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pbab01.dtsi @@ -9,17 +9,103 @@ * http://www.gnu.org/copyleft/gpl.html */ +#include <dt-bindings/sound/fsl-imx-audmux.h> + / { chosen { linux,stdout-path = &uart4; }; + + regulators { + sound_1v8: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "i2s-audio-1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + sound_3v3: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "i2s-audio-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + }; + + tlv320_mclk: oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <19200000>; + clock-output-names = "tlv320-mclk"; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,name = "OnboardTLV320AIC3007"; + simple-audio-card,format = "i2s"; + simple-audio-card,bitclock-master = <&dailink_master>; + simple-audio-card,frame-master = <&dailink_master>; + simple-audio-card,widgets = + "Microphone", "Mic Jack", + "Line", "Line In", + "Line", "Line Out", + "Speaker", "Speaker", + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Line Out", "LLOUT", + "Line Out", "RLOUT", + "Speaker", "SPOP", + "Speaker", "SPOM", + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "MIC3L", "Mic Jack", + "MIC3R", "Mic Jack", + "Mic Jack", "Mic Bias", + "LINE1L", "Line In", + "LINE1R", "Line In"; + + simple-audio-card,cpu { + sound-dai = <&ssi2>; + }; + + dailink_master: simple-audio-card,codec { + sound-dai = <&codec>; + clocks = <&tlv320_mclk>; + }; + }; + }; -&fec { +&audmux { status = "okay"; + + ssi2 { + fsl,audmux-port = <1>; + fsl,port-config = < + (IMX_AUDMUX_V2_PTCR_TFSDIR | + IMX_AUDMUX_V2_PTCR_TFSEL(4) | + IMX_AUDMUX_V2_PTCR_TCLKDIR | + IMX_AUDMUX_V2_PTCR_TCSEL(4)) + IMX_AUDMUX_V2_PDCR_RXDSEL(4) + >; + }; + + pins5 { + fsl,audmux-port = <4>; + fsl,port-config = < + 0x00000000 + IMX_AUDMUX_V2_PDCR_RXDSEL(1) + >; + }; }; -&gpmi { +&can1 { + status = "okay"; +}; + +&fec { status = "okay"; }; @@ -28,14 +114,18 @@ }; &i2c2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c2>; - clock-frequency = <100000>; status = "okay"; - tlv320@18 { - compatible = "ti,tlv320aic3x"; + codec: tlv320@18 { + compatible = "ti,tlv320aic3007"; + #sound-dai-cells = <0>; reg = <0x18>; + ai3x-micbias-vg = <2>; + + AVDD-supply = <&sound_3v3>; + IOVDD-supply = <&sound_3v3>; + DRVDD-supply = <&sound_3v3>; + DVDD-supply = <&sound_1v8>; }; stmpe@41 { @@ -55,9 +145,14 @@ }; &i2c3 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_i2c3>; - clock-frequency = <100000>; + status = "okay"; +}; + +&pcie { + status = "okay"; +}; + +&ssi2 { status = "okay"; }; @@ -84,19 +179,3 @@ &usdhc3 { status = "okay"; }; - -&iomuxc { - pinctrl_i2c2: i2c2grp { - fsl,pins = < - MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 - >; - }; - - pinctrl_i2c3: i2c3grp { - fsl,pins = < - MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 - MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 - >; - }; -}; diff --git a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi index 0e50bb0..19cc269 100644 --- a/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi +++ b/arch/arm/boot/dts/imx6qdl-phytec-pfla02.dtsi @@ -58,6 +58,18 @@ }; }; +&audmux { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_audmux>; + status = "disabled"; +}; + +&can1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "disabled"; +}; + &ecspi3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_ecspi3>; @@ -72,6 +84,22 @@ }; }; +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet>; + phy-mode = "rgmii"; + phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; + phy-supply = <&vdd_eth_io_reg>; + status = "disabled"; +}; + +&gpmi { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_gpmi_nand>; + nand-on-flash-bbt; + status = "okay"; +}; + &i2c1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c1>; @@ -85,8 +113,8 @@ pmic@58 { compatible = "dlg,da9063"; reg = <0x58>; - interrupt-parent = <&gpio4>; - interrupts = <17 0x8>; /* active-low GPIO4_17 */ + interrupt-parent = <&gpio2>; + interrupts = <9 0x8>; /* active-low GPIO2_9 */ regulators { vddcore_reg: bcore1 { @@ -162,6 +190,18 @@ }; }; +&i2c2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; + clock-frequency = <100000>; +}; + +&i2c3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c3>; + clock-frequency = <100000>; +}; + &iomuxc { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_hog>; @@ -171,7 +211,7 @@ fsl,pins = < MX6QDL_PAD_EIM_D23__GPIO3_IO23 0x80000000 MX6QDL_PAD_DISP0_DAT3__GPIO4_IO24 0x80000000 /* SPI NOR chipselect */ - MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000 /* PMIC interrupt */ + MX6QDL_PAD_SD4_DAT1__GPIO2_IO09 0x80000000 /* PMIC interrupt */ MX6QDL_PAD_ENET_TXD0__GPIO1_IO30 0x80000000 /* Green LED */ MX6QDL_PAD_EIM_EB3__GPIO2_IO31 0x80000000 /* Red LED */ >; @@ -206,6 +246,13 @@ >; }; + pinctrl_flexcan1: flexcan1grp { + fsl,pins = < + MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b0 + MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b0 + >; + }; + pinctrl_gpmi_nand: gpminandgrp { fsl,pins = < MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1 @@ -235,6 +282,24 @@ >; }; + pinctrl_i2c2: i2c2grp { + fsl,pins = < + MX6QDL_PAD_EIM_EB2__I2C2_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D16__I2C2_SDA 0x4001b8b1 + >; + }; + + pinctrl_i2c3: i2c3grp { + fsl,pins = < + MX6QDL_PAD_EIM_D17__I2C3_SCL 0x4001b8b1 + MX6QDL_PAD_EIM_D18__I2C3_SDA 0x4001b8b1 + >; + }; + + pinctrl_pcie: pciegrp { + fsl,pins = <MX6QDL_PAD_DI0_PIN15__GPIO4_IO17 0x80000000>; + }; + pinctrl_uart3: uart3grp { fsl,pins = < MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1 @@ -293,22 +358,22 @@ MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x80000000 >; }; - }; -}; -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_enet>; - phy-mode = "rgmii"; - phy-reset-gpios = <&gpio3 23 GPIO_ACTIVE_LOW>; - phy-supply = <&vdd_eth_io_reg>; - status = "disabled"; + pinctrl_audmux: audmuxgrp { + fsl,pins = < + MX6QDL_PAD_DISP0_DAT16__AUD5_TXC 0x130b0 + MX6QDL_PAD_DISP0_DAT17__AUD5_TXD 0x110b0 + MX6QDL_PAD_DISP0_DAT18__AUD5_TXFS 0x130b0 + MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0 + >; + }; + }; }; -&gpmi { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_gpmi_nand>; - nand-on-flash-bbt; +&pcie { + pinctrl-name = "default"; + pinctrl-0 = <&pinctrl_pcie>; + reset-gpio = <&gpio4 17 0>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi index baf2f00..05f5ff7 100644 --- a/arch/arm/boot/dts/imx6qdl-sabresd.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabresd.dtsi @@ -531,6 +531,10 @@ status = "okay"; }; +&snvs_poweroff { + status = "okay"; +}; + &ssi2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 9596ed5..4fc03b7 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -333,9 +333,17 @@ }; vpu: vpu@02040000 { + compatible = "cnm,coda960"; reg = <0x02040000 0x3c000>; interrupts = <0 3 IRQ_TYPE_LEVEL_HIGH>, <0 12 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "bit", "jpeg"; + clocks = <&clks IMX6QDL_CLK_VPU_AXI>, + <&clks IMX6QDL_CLK_MMDC_CH0_AXI>, + <&clks IMX6QDL_CLK_OCRAM>; + clock-names = "per", "ahb", "ocram"; + resets = <&src 1>; + iram = <&ocram>; }; aipstz@0207c000 { /* AIPSTZ1 */ @@ -657,6 +665,12 @@ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>, <0 20 IRQ_TYPE_LEVEL_HIGH>; }; + + snvs_poweroff: snvs-poweroff@38 { + compatible = "fsl,sec-v4.0-poweroff"; + reg = <0x38 0x4>; + status = "disabled"; + }; }; epit1: epit@020d0000 { /* EPIT1 */ diff --git a/arch/arm/boot/dts/imx6sl-evk.dts b/arch/arm/boot/dts/imx6sl-evk.dts index 898d14f..fda4932 100644 --- a/arch/arm/boot/dts/imx6sl-evk.dts +++ b/arch/arm/boot/dts/imx6sl-evk.dts @@ -580,6 +580,10 @@ status = "okay"; }; +&snvs_poweroff { + status = "okay"; +}; + &ssi2 { status = "okay"; }; diff --git a/arch/arm/boot/dts/imx6sl.dtsi b/arch/arm/boot/dts/imx6sl.dtsi index dfd83e6..36ab8e0 100644 --- a/arch/arm/boot/dts/imx6sl.dtsi +++ b/arch/arm/boot/dts/imx6sl.dtsi @@ -574,6 +574,12 @@ interrupts = <0 19 IRQ_TYPE_LEVEL_HIGH>, <0 20 IRQ_TYPE_LEVEL_HIGH>; }; + + snvs_poweroff: snvs-poweroff@38 { + compatible = "fsl,sec-v4.0-poweroff"; + reg = <0x38 0x4>; + status = "disabled"; + }; }; epit1: epit@020d0000 { diff --git a/arch/arm/boot/dts/imx6sx-sdb.dts b/arch/arm/boot/dts/imx6sx-sdb.dts index 82d6b34..1e6e5cc 100644 --- a/arch/arm/boot/dts/imx6sx-sdb.dts +++ b/arch/arm/boot/dts/imx6sx-sdb.dts @@ -105,6 +105,30 @@ gpio = <&gpio3 27 0>; enable-active-high; }; + + reg_peri_3v3: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_peri_3v3>; + regulator-name = "peri_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio4 16 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + }; + + reg_enet_3v3: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet_3v3>; + regulator-name = "enet_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpios = <&gpio2 6 GPIO_ACTIVE_LOW>; + }; }; sound { @@ -133,6 +157,14 @@ &fec1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_enet1>; + phy-supply = <®_enet_3v3>; + phy-mode = "rgmii"; + status = "okay"; +}; + +&fec2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enet2>; phy-mode = "rgmii"; status = "okay"; }; @@ -304,6 +336,10 @@ status = "okay"; }; +&snvs_poweroff { + status = "okay"; +}; + &ssi2 { status = "okay"; }; @@ -394,6 +430,30 @@ MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081 MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081 MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081 + MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M 0x91 + >; + }; + + pinctrl_enet_3v3: enet3v3grp { + fsl,pins = < + MX6SX_PAD_ENET2_COL__GPIO2_IO_6 0x80000000 + >; + }; + + pinctrl_enet2: enet2grp { + fsl,pins = < + MX6SX_PAD_RGMII2_TXC__ENET2_RGMII_TXC 0xa0b9 + MX6SX_PAD_RGMII2_TD0__ENET2_TX_DATA_0 0xa0b1 + MX6SX_PAD_RGMII2_TD1__ENET2_TX_DATA_1 0xa0b1 + MX6SX_PAD_RGMII2_TD2__ENET2_TX_DATA_2 0xa0b1 + MX6SX_PAD_RGMII2_TD3__ENET2_TX_DATA_3 0xa0b1 + MX6SX_PAD_RGMII2_TX_CTL__ENET2_TX_EN 0xa0b1 + MX6SX_PAD_RGMII2_RXC__ENET2_RX_CLK 0x3081 + MX6SX_PAD_RGMII2_RD0__ENET2_RX_DATA_0 0x3081 + MX6SX_PAD_RGMII2_RD1__ENET2_RX_DATA_1 0x3081 + MX6SX_PAD_RGMII2_RD2__ENET2_RX_DATA_2 0x3081 + MX6SX_PAD_RGMII2_RD3__ENET2_RX_DATA_3 0x3081 + MX6SX_PAD_RGMII2_RX_CTL__ENET2_RX_EN 0x3081 >; }; @@ -452,6 +512,12 @@ >; }; + pinctrl_peri_3v3: peri3v3grp { + fsl,pins = < + MX6SX_PAD_QSPI1A_DATA0__GPIO4_IO_16 0x80000000 + >; + }; + pinctrl_pwm3: pwm3grp-1 { fsl,pins = < MX6SX_PAD_SD1_DATA2__PWM3_OUT 0x110b0 diff --git a/arch/arm/boot/dts/imx6sx.dtsi b/arch/arm/boot/dts/imx6sx.dtsi index f3e88c0..7a24fee 100644 --- a/arch/arm/boot/dts/imx6sx.dtsi +++ b/arch/arm/boot/dts/imx6sx.dtsi @@ -671,6 +671,12 @@ reg = <0x34 0x58>; interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>; }; + + snvs_poweroff: snvs-poweroff@38 { + compatible = "fsl,sec-v4.0-poweroff"; + reg = <0x38 0x4>; + status = "disabled"; + }; }; epit1: epit@020d0000 { @@ -877,7 +883,7 @@ }; fec2: ethernet@021b4000 { - compatible = "fsl,imx6sx-fec"; + compatible = "fsl,imx6sx-fec", "fsl,imx6q-fec"; reg = <0x021b4000 0x4000>; interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts new file mode 100644 index 0000000..9c5e16b --- /dev/null +++ b/arch/arm/boot/dts/ls1021a-qds.dts @@ -0,0 +1,240 @@ +/* + * Copyright 2013-2014 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "ls1021a.dtsi" + +/ { + model = "LS1021A QDS Board"; + + aliases { + enet0_rgmii_phy = &rgmii_phy1; + enet1_rgmii_phy = &rgmii_phy2; + enet2_rgmii_phy = &rgmii_phy3; + enet0_sgmii_phy = &sgmii_phy1c; + enet1_sgmii_phy = &sgmii_phy1d; + }; +}; + +&dspi0 { + bus-num = <0>; + status = "okay"; + + dspiflash: at45db021d@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash"; + spi-max-frequency = <16000000>; + spi-cpol; + spi-cpha; + reg = <0>; + }; +}; + +&i2c0 { + status = "okay"; + + pca9547: mux@77 { + reg = <0x77>; + #address-cells = <1>; + #size-cells = <0>; + + i2c@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0>; + + ds3232: rtc@68 { + compatible = "dallas,ds3232"; + reg = <0x68>; + interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x2>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <1000>; + }; + + ina220@41 { + compatible = "ti,ina220"; + reg = <0x41>; + shunt-resistor = <1000>; + }; + }; + + i2c@3 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x3>; + + eeprom@56 { + compatible = "atmel,24c512"; + reg = <0x56>; + }; + + eeprom@57 { + compatible = "atmel,24c512"; + reg = <0x57>; + }; + + adt7461a@4c { + compatible = "adi,adt7461a"; + reg = <0x4c>; + }; + }; + }; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + /* NOR, NAND Flashes and FPGA on board */ + ranges = <0x0 0x0 0x0 0x60000000 0x08000000 + 0x2 0x0 0x0 0x7e800000 0x00010000 + 0x3 0x0 0x0 0x7fb00000 0x00000100>; + status = "okay"; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; + + fpga: board-control@3,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + reg = <0x3 0x0 0x0000100>; + bank-width = <1>; + device-width = <1>; + ranges = <0 3 0 0x100>; + + mdio-mux-emi1 { + compatible = "mdio-mux-mmioreg"; + mdio-parent-bus = <&mdio0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x54 1>; /* BRDCFG4 */ + mux-mask = <0xe0>; /* EMI1[2:0] */ + + /* Onboard PHYs */ + ls1021amdio0: mdio@0 { + reg = <0>; + #address-cells = <1>; + #size-cells = <0>; + rgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + }; + + ls1021amdio1: mdio@20 { + reg = <0x20>; + #address-cells = <1>; + #size-cells = <0>; + rgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + }; + + ls1021amdio2: mdio@40 { + reg = <0x40>; + #address-cells = <1>; + #size-cells = <0>; + rgmii_phy3: ethernet-phy@3 { + reg = <0x3>; + }; + }; + + ls1021amdio3: mdio@60 { + reg = <0x60>; + #address-cells = <1>; + #size-cells = <0>; + sgmii_phy1c: ethernet-phy@1c { + reg = <0x1c>; + }; + }; + + ls1021amdio4: mdio@80 { + reg = <0x80>; + #address-cells = <1>; + #size-cells = <0>; + sgmii_phy1d: ethernet-phy@1d { + reg = <0x1d>; + }; + }; + }; + }; +}; + +&lpuart0 { + status = "okay"; +}; + +&mdio0 { + tbi0: tbi-phy@8 { + reg = <0x8>; + device_type = "tbi-phy"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/ls1021a-twr.dts b/arch/arm/boot/dts/ls1021a-twr.dts new file mode 100644 index 0000000..a2c591e --- /dev/null +++ b/arch/arm/boot/dts/ls1021a-twr.dts @@ -0,0 +1,127 @@ +/* + * Copyright 2013-2014 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "ls1021a.dtsi" + +/ { + model = "LS1021A TWR Board"; + + aliases { + enet2_rgmii_phy = &rgmii_phy1; + enet0_sgmii_phy = &sgmii_phy2; + enet1_sgmii_phy = &sgmii_phy0; + }; +}; + +&dspi1 { + bus-num = <0>; + status = "okay"; + + dspiflash: s25fl064k@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "spansion,s25fl064k"; + spi-max-frequency = <16000000>; + spi-cpol; + spi-cpha; + reg = <0>; + }; +}; + +&i2c0 { + status = "okay"; +}; + +&i2c1 { + status = "okay"; +}; + +&ifc { + #address-cells = <2>; + #size-cells = <1>; + /* NOR Flash on board */ + ranges = <0x0 0x0 0x0 0x60000000 0x08000000>; + status = "okay"; + + nor@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0x0 0x0 0x8000000>; + bank-width = <2>; + device-width = <1>; + }; +}; + +&lpuart0 { + status = "okay"; +}; + +&mdio0 { + sgmii_phy0: ethernet-phy@0 { + reg = <0x0>; + }; + rgmii_phy1: ethernet-phy@1 { + reg = <0x1>; + }; + sgmii_phy2: ethernet-phy@2 { + reg = <0x2>; + }; + tbi1: tbi-phy@1f { + reg = <0x1f>; + device_type = "tbi-phy"; + }; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/ls1021a.dtsi b/arch/arm/boot/dts/ls1021a.dtsi new file mode 100644 index 0000000..657da14 --- /dev/null +++ b/arch/arm/boot/dts/ls1021a.dtsi @@ -0,0 +1,408 @@ +/* + * Copyright 2013-2014 Freescale Semiconductor, Inc. + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public + * License along with this file; if not, write to the Free + * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, + * MA 02110-1301 USA + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include "skeleton64.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + compatible = "fsl,ls1021a"; + interrupt-parent = <&gic>; + + aliases { + serial0 = &lpuart0; + serial1 = &lpuart1; + serial2 = &lpuart2; + serial3 = &lpuart3; + serial4 = &lpuart4; + serial5 = &lpuart5; + sysclk = &sysclk; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@f00 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0xf00>; + clocks = <&cluster1_clk>; + }; + + cpu@f01 { + compatible = "arm,cortex-a7"; + device_type = "cpu"; + reg = <0xf01>; + clocks = <&cluster1_clk>; + }; + }; + + timer { + compatible = "arm,armv7-timer"; + interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>, + <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>; + }; + + pmu { + compatible = "arm,cortex-a7-pmu"; + interrupts = <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <2>; + #size-cells = <2>; + device_type = "soc"; + interrupt-parent = <&gic>; + ranges; + + gic: interrupt-controller@1400000 { + compatible = "arm,cortex-a7-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x0 0x1401000 0x0 0x1000>, + <0x0 0x1402000 0x0 0x1000>, + <0x0 0x1404000 0x0 0x2000>, + <0x0 0x1406000 0x0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>; + + }; + + ifc: ifc@1530000 { + compatible = "fsl,ifc", "simple-bus"; + reg = <0x0 0x1530000 0x0 0x10000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + }; + + dcfg: dcfg@1ee0000 { + compatible = "fsl,ls1021a-dcfg", "syscon"; + reg = <0x0 0x1ee0000 0x0 0x10000>; + big-endian; + }; + + esdhc: esdhc@1560000 { + compatible = "fsl,esdhc"; + reg = <0x0 0x1560000 0x0 0x10000>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; + voltage-ranges = <1800 1800 3300 3300>; + sdhci,auto-cmd12; + big-endian; + bus-width = <4>; + status = "disabled"; + }; + + scfg: scfg@1570000 { + compatible = "fsl,ls1021a-scfg", "syscon"; + reg = <0x0 0x1570000 0x0 0x10000>; + }; + + clockgen: clocking@1ee1000 { + #address-cells = <1>; + #size-cells = <1>; + ranges = <0x0 0x0 0x1ee1000 0x10000>; + + sysclk: sysclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-output-names = "sysclk"; + }; + + cga_pll1: pll@800 { + compatible = "fsl,qoriq-core-pll-2.0"; + #clock-cells = <1>; + reg = <0x800 0x10>; + clocks = <&sysclk>; + clock-output-names = "cga-pll1", "cga-pll1-div2", + "cga-pll1-div4"; + }; + + platform_clk: pll@c00 { + compatible = "fsl,qoriq-core-pll-2.0"; + #clock-cells = <1>; + reg = <0xc00 0x10>; + clocks = <&sysclk>; + clock-output-names = "platform-clk", "platform-clk-div2"; + }; + + cluster1_clk: clk0c0@0 { + compatible = "fsl,qoriq-core-mux-2.0"; + #clock-cells = <0>; + reg = <0x0 0x10>; + clock-names = "pll1cga", "pll1cga-div2", "pll1cga-div4"; + clocks = <&cga_pll1 0>, <&cga_pll1 1>, <&cga_pll1 2>; + clock-output-names = "cluster1-clk"; + }; + }; + + dspi0: dspi@2100000 { + compatible = "fsl,vf610-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2100000 0x0 0x10000>; + interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dspi"; + clocks = <&platform_clk 1>; + spi-num-chipselects = <5>; + big-endian; + status = "disabled"; + }; + + dspi1: dspi@2110000 { + compatible = "fsl,vf610-dspi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2110000 0x0 0x10000>; + interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "dspi"; + clocks = <&platform_clk 1>; + spi-num-chipselects = <5>; + big-endian; + status = "disabled"; + }; + + i2c0: i2c@2180000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2180000 0x0 0x10000>; + interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "i2c"; + clocks = <&platform_clk 1>; + status = "disabled"; + }; + + i2c1: i2c@2190000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2190000 0x0 0x10000>; + interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "i2c"; + clocks = <&platform_clk 1>; + status = "disabled"; + }; + + i2c2: i2c@21a0000 { + compatible = "fsl,vf610-i2c"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x21a0000 0x0 0x10000>; + interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clock-names = "i2c"; + clocks = <&platform_clk 1>; + status = "disabled"; + }; + + uart0: serial@21c0500 { + compatible = "fsl,16550-FIFO64", "ns16550a"; + reg = <0x0 0x21c0500 0x0 0x100>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; + fifo-size = <15>; + status = "disabled"; + }; + + uart1: serial@21c0600 { + compatible = "fsl,16550-FIFO64", "ns16550a"; + reg = <0x0 0x21c0600 0x0 0x100>; + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; + fifo-size = <15>; + status = "disabled"; + }; + + uart2: serial@21d0500 { + compatible = "fsl,16550-FIFO64", "ns16550a"; + reg = <0x0 0x21d0500 0x0 0x100>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; + fifo-size = <15>; + status = "disabled"; + }; + + uart3: serial@21d0600 { + compatible = "fsl,16550-FIFO64", "ns16550a"; + reg = <0x0 0x21d0600 0x0 0x100>; + interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>; + clock-frequency = <0>; + fifo-size = <15>; + status = "disabled"; + }; + + lpuart0: serial@2950000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2950000 0x0 0x1000>; + interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sysclk>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart1: serial@2960000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2960000 0x0 0x1000>; + interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&platform_clk 1>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart2: serial@2970000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2970000 0x0 0x1000>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&platform_clk 1>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart3: serial@2980000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2980000 0x0 0x1000>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&platform_clk 1>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart4: serial@2990000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x2990000 0x0 0x1000>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&platform_clk 1>; + clock-names = "ipg"; + status = "disabled"; + }; + + lpuart5: serial@29a0000 { + compatible = "fsl,ls1021a-lpuart"; + reg = <0x0 0x29a0000 0x0 0x1000>; + interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&platform_clk 1>; + clock-names = "ipg"; + status = "disabled"; + }; + + wdog0: watchdog@2ad0000 { + compatible = "fsl,imx21-wdt"; + reg = <0x0 0x2ad0000 0x0 0x10000>; + interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&platform_clk 1>; + clock-names = "wdog-en"; + big-endian; + }; + + sai1: sai@2b50000 { + compatible = "fsl,vf610-sai"; + reg = <0x0 0x2b50000 0x0 0x10000>; + interrupts = <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&platform_clk 1>; + clock-names = "sai"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 47>, + <&edma0 1 46>; + big-endian; + status = "disabled"; + }; + + sai2: sai@2b60000 { + compatible = "fsl,vf610-sai"; + reg = <0x0 0x2b60000 0x0 0x10000>; + interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&platform_clk 1>; + clock-names = "sai"; + dma-names = "tx", "rx"; + dmas = <&edma0 1 45>, + <&edma0 1 44>; + big-endian; + status = "disabled"; + }; + + edma0: edma@2c00000 { + #dma-cells = <2>; + compatible = "fsl,vf610-edma"; + reg = <0x0 0x2c00000 0x0 0x10000>, + <0x0 0x2c10000 0x0 0x10000>, + <0x0 0x2c20000 0x0 0x10000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma-tx", "edma-err"; + dma-channels = <32>; + big-endian; + clock-names = "dmamux0", "dmamux1"; + clocks = <&platform_clk 1>, + <&platform_clk 1>; + }; + + mdio0: mdio@2d24000 { + compatible = "gianfar"; + device_type = "mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0x2d24000 0x0 0x4000>; + }; + + usb@8600000 { + compatible = "fsl-usb2-dr-v2.5", "fsl-usb2-dr"; + reg = <0x0 0x8600000 0x0 0x1000>; + interrupts = <GIC_SPI 171 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + phy_type = "ulpi"; + }; + + usb3@3100000 { + compatible = "snps,dwc3"; + reg = <0x0 0x3100000 0x0 0x10000>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + dr_mode = "host"; + }; + }; +}; diff --git a/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi new file mode 100644 index 0000000..56a452b --- /dev/null +++ b/arch/arm/boot/dts/vf-colibri-eval-v3.dtsi @@ -0,0 +1,96 @@ +/* + * Copyright 2014 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/ { + chosen { + bootargs = "console=ttyLP0,115200"; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + sys_5v0_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + /* USBH_PEN */ + usbh_vbus_reg: regulator@1 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usbh1_reg>; + reg = <1>; + regulator-name = "usbh_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpio3 19 GPIO_ACTIVE_LOW>; + vin-supply = <&sys_5v0_reg>; + }; + }; +}; + +&bl { + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + + /* M41T0M6 real time clock on carrier board */ + rtc: m41t0m6@68 { + compatible = "st,m41t00"; + reg = <0x68>; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; + +&uart1 { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usbh1 { + vbus-supply = <&usbh_vbus_reg>; +}; diff --git a/arch/arm/boot/dts/vf-colibri.dtsi b/arch/arm/boot/dts/vf-colibri.dtsi new file mode 100644 index 0000000..82f5728 --- /dev/null +++ b/arch/arm/boot/dts/vf-colibri.dtsi @@ -0,0 +1,186 @@ +/* + * Copyright 2014 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/ { + bl: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 5000000 0>; + status = "disabled"; + }; +}; + +&adc0 { + status = "okay"; +}; + +&adc1 { + status = "okay"; +}; + +&edma0 { + status = "okay"; +}; + +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + cd-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>; +}; + +&fec1 { + phy-mode = "rmii"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fec1>; +}; + +&i2c0 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; +}; + +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm0>; +}; + +&pwm1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm1>; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart1>; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart2>; +}; + +&usbdev0 { + disable-over-current; + status = "okay"; +}; + +&usbh1 { + disable-over-current; + status = "okay"; +}; + +&usbmisc0 { + status = "okay"; +}; + +&usbmisc1 { + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; + +&iomuxc { + vf610-colibri { + pinctrl_gpio_ext: gpio_ext { + fsl,pins = < + VF610_PAD_PTD10__GPIO_89 0x22ed /* EXT_IO_0 */ + VF610_PAD_PTD9__GPIO_88 0x22ed /* EXT_IO_1 */ + VF610_PAD_PTD26__GPIO_68 0x22ed /* EXT_IO_2 */ + >; + }; + + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTB20__GPIO_42 0x219d + >; + }; + + pinctrl_fec1: fec1grp { + fsl,pins = < + VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 + VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 + VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 + VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1 + VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 + VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 + VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 + VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 + VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 + >; + }; + + pinctrl_i2c0: i2c0grp { + fsl,pins = < + VF610_PAD_PTB14__I2C0_SCL 0x37ff + VF610_PAD_PTB15__I2C0_SDA 0x37ff + >; + }; + + pinctrl_pwm0: pwm0grp { + fsl,pins = < + VF610_PAD_PTB0__FTM0_CH0 0x1182 + VF610_PAD_PTB1__FTM0_CH1 0x1182 + >; + }; + + pinctrl_pwm1: pwm1grp { + fsl,pins = < + VF610_PAD_PTB8__FTM1_CH0 0x1182 + VF610_PAD_PTB9__FTM1_CH1 0x1182 + >; + }; + + pinctrl_uart0: uart0grp { + fsl,pins = < + VF610_PAD_PTB10__UART0_TX 0x21a2 + VF610_PAD_PTB11__UART0_RX 0x21a1 + >; + }; + + pinctrl_uart1: uart1grp { + fsl,pins = < + VF610_PAD_PTB4__UART1_TX 0x21a2 + VF610_PAD_PTB5__UART1_RX 0x21a1 + >; + }; + + pinctrl_uart2: uart2grp { + fsl,pins = < + VF610_PAD_PTD0__UART2_TX 0x21a2 + VF610_PAD_PTD1__UART2_RX 0x21a1 + VF610_PAD_PTD2__UART2_RTS 0x21a2 + VF610_PAD_PTD3__UART2_CTS 0x21a1 + >; + }; + + pinctrl_usbh1_reg: gpio_usb_vbus { + fsl,pins = < + VF610_PAD_PTD4__GPIO_83 0x22ed + >; + }; + }; +}; diff --git a/arch/arm/boot/dts/vf500-colibri-eval-v3.dts b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts new file mode 100644 index 0000000..7fc782c --- /dev/null +++ b/arch/arm/boot/dts/vf500-colibri-eval-v3.dts @@ -0,0 +1,17 @@ +/* + * Copyright 2014 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/dts-v1/; +#include "vf500-colibri.dtsi" +#include "vf-colibri-eval-v3.dtsi" + +/ { + model = "Toradex Colibri VF50 on Colibri Evaluation Board"; + compatible = "toradex,vf500-colibri_vf50-on-eval", "toradex,vf500-colibri_vf50", "fsl,vf500"; +}; diff --git a/arch/arm/boot/dts/vf500-colibri.dtsi b/arch/arm/boot/dts/vf500-colibri.dtsi new file mode 100644 index 0000000..cee34a3 --- /dev/null +++ b/arch/arm/boot/dts/vf500-colibri.dtsi @@ -0,0 +1,20 @@ +/* + * Copyright 2014 Toradex AG + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include "vf500.dtsi" +#include "vf-colibri.dtsi" + +/ { + model = "Toradex Colibri VF50 COM"; + compatible = "toradex,vf610-colibri_vf50", "fsl,vf500"; + + memory { + reg = <0x80000000 0x8000000>; + }; +}; diff --git a/arch/arm/boot/dts/vf500.dtsi b/arch/arm/boot/dts/vf500.dtsi new file mode 100644 index 0000000..de67005 --- /dev/null +++ b/arch/arm/boot/dts/vf500.dtsi @@ -0,0 +1,171 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include "skeleton.dtsi" +#include "vfxxx.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> + +/ { + cpus { + #address-cells = <1>; + #size-cells = <0>; + + a5_cpu: cpu@0 { + compatible = "arm,cortex-a5"; + device_type = "cpu"; + reg = <0x0>; + }; + }; + + soc { + interrupt-parent = <&intc>; + + aips-bus@40000000 { + + intc: interrupt-controller@40002000 { + compatible = "arm,cortex-a9-gic"; + #interrupt-cells = <3>; + interrupt-controller; + reg = <0x40003000 0x1000>, + <0x40002100 0x100>; + }; + + global_timer: timer@40002200 { + compatible = "arm,cortex-a9-global-timer"; + reg = <0x40002200 0x20>; + interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clks VF610_CLK_PLATFORM_BUS>; + }; + }; + }; +}; + +&adc0 { + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; +}; + +&adc1 { + interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; +}; + +&can0 { + interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>; +}; + +&can1 { + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; +}; + +&dspi0 { + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; +}; + +&edma0 { + interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma-tx", "edma-err"; +}; + +&edma1 { + interrupts = <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "edma-tx", "edma-err"; +}; + +&esdhc1 { + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>; +}; + +&fec0 { + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; +}; + +&fec1 { + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; +}; + +&ftm { + interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio1 { + interrupts = <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio2 { + interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio3 { + interrupts = <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio4 { + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>; +}; + +&gpio5 { + interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>; +}; + +&i2c0 { + interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; +}; + +&pit { + interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>; +}; + +&qspi0 { + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>; +}; + +&sai2 { + interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>; +}; + +&uart0 { + interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; +}; + +&uart1 { + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>; +}; + +&uart2 { + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; +}; + +&uart3 { + interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>; +}; + +&uart4 { + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>; +}; + +&uart5 { + interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>; +}; + +&usbdev0 { + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; +}; + +&usbh1 { + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; +}; + +&usbphy0 { + interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; +}; + +&usbphy1 { + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>; +}; diff --git a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts index 7fb3066..10ebe99 100644 --- a/arch/arm/boot/dts/vf610-colibri-eval-v3.dts +++ b/arch/arm/boot/dts/vf610-colibri-eval-v3.dts @@ -9,38 +9,9 @@ /dts-v1/; #include "vf610-colibri.dtsi" +#include "vf-colibri-eval-v3.dtsi" / { model = "Toradex Colibri VF61 on Colibri Evaluation Board"; compatible = "toradex,vf610-colibri_vf61-on-eval", "toradex,vf610-colibri_vf61", "fsl,vf610"; - - chosen { - bootargs = "console=ttyLP0,115200"; - }; -}; - -&esdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1>; - bus-width = <4>; - status = "okay"; -}; - -&fec1 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec1>; - status = "okay"; -}; - -&uart0 { - status = "okay"; -}; - -&uart1 { - status = "okay"; -}; - -&uart2 { - status = "okay"; -}; +};
\ No newline at end of file diff --git a/arch/arm/boot/dts/vf610-colibri.dtsi b/arch/arm/boot/dts/vf610-colibri.dtsi index 0cd8343..19fe045 100644 --- a/arch/arm/boot/dts/vf610-colibri.dtsi +++ b/arch/arm/boot/dts/vf610-colibri.dtsi @@ -8,6 +8,7 @@ */ #include "vf610.dtsi" +#include "vf-colibri.dtsi" / { model = "Toradex Colibri VF61 COM"; @@ -16,108 +17,9 @@ memory { reg = <0x80000000 0x10000000>; }; - - clocks { - enet_ext { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <50000000>; - }; - }; - -}; - -&esdhc1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_esdhc1>; - bus-width = <4>; -}; - -&fec1 { - phy-mode = "rmii"; - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_fec1>; }; &L2 { arm,data-latency = <2 1 2>; arm,tag-latency = <3 2 3>; }; - -&uart0 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart0>; -}; - -&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart1>; -}; - -&uart2 { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_uart2>; -}; - -&usbdev0 { - disable-over-current; - status = "okay"; -}; - -&usbh1 { - disable-over-current; - status = "okay"; -}; - -&iomuxc { - vf610-colibri { - pinctrl_esdhc1: esdhc1grp { - fsl,pins = < - VF610_PAD_PTA24__ESDHC1_CLK 0x31ef - VF610_PAD_PTA25__ESDHC1_CMD 0x31ef - VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef - VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef - VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef - VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef - VF610_PAD_PTB20__GPIO_42 0x219d - >; - }; - - pinctrl_fec1: fec1grp { - fsl,pins = < - VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 - VF610_PAD_PTC10__ENET_RMII1_MDIO 0x30d3 - VF610_PAD_PTC11__ENET_RMII1_CRS 0x30d1 - VF610_PAD_PTC12__ENET_RMII_RXD1 0x30d1 - VF610_PAD_PTC13__ENET_RMII1_RXD0 0x30d1 - VF610_PAD_PTC14__ENET_RMII1_RXER 0x30d1 - VF610_PAD_PTC15__ENET_RMII1_TXD1 0x30d2 - VF610_PAD_PTC16__ENET_RMII1_TXD0 0x30d2 - VF610_PAD_PTC17__ENET_RMII1_TXEN 0x30d2 - >; - }; - - pinctrl_uart0: uart0grp { - fsl,pins = < - VF610_PAD_PTB10__UART0_TX 0x21a2 - VF610_PAD_PTB11__UART0_RX 0x21a1 - >; - }; - - pinctrl_uart1: uart1grp { - fsl,pins = < - VF610_PAD_PTB4__UART1_TX 0x21a2 - VF610_PAD_PTB5__UART1_RX 0x21a1 - >; - }; - - pinctrl_uart2: uart2grp { - fsl,pins = < - VF610_PAD_PTD0__UART2_TX 0x21a2 - VF610_PAD_PTD1__UART2_RX 0x21a1 - VF610_PAD_PTD2__UART2_RTS 0x21a2 - VF610_PAD_PTD3__UART2_CTS 0x21a1 - >; - }; - }; -}; diff --git a/arch/arm/boot/dts/vf610-cosmic.dts b/arch/arm/boot/dts/vf610-cosmic.dts index 3fd1b74..b0ce8b8 100644 --- a/arch/arm/boot/dts/vf610-cosmic.dts +++ b/arch/arm/boot/dts/vf610-cosmic.dts @@ -23,14 +23,16 @@ reg = <0x80000000 0x10000000>; }; - clocks { - enet_ext { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <50000000>; - }; + enet_ext: enet_ext { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; }; +}; +&clks { + clocks = <&sxosc>, <&fxosc>, <&enet_ext>; + clock-names = "sxosc", "fxosc", "enet_ext"; }; &fec1 { diff --git a/arch/arm/boot/dts/vf610-twr.dts b/arch/arm/boot/dts/vf610-twr.dts index 189b697..a0f7621 100644 --- a/arch/arm/boot/dts/vf610-twr.dts +++ b/arch/arm/boot/dts/vf610-twr.dts @@ -22,18 +22,16 @@ reg = <0x80000000 0x8000000>; }; - clocks { - audio_ext { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24576000>; - }; + audio_ext: mclk_osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24576000>; + }; - enet_ext { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <50000000>; - }; + enet_ext: eth_osc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <50000000>; }; regulators { @@ -95,6 +93,11 @@ status = "okay"; }; +&clks { + clocks = <&sxosc>, <&fxosc>, <&enet_ext>, <&audio_ext>; + clock-names = "sxosc", "fxosc", "enet_ext", "audio_ext"; +}; + &dspi0 { bus-num = <0>; pinctrl-names = "default"; @@ -112,10 +115,15 @@ }; }; +&edma0 { + status = "okay"; +}; + &esdhc1 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_esdhc1>; bus-width = <4>; + cd-gpios = <&gpio5 6 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -285,3 +293,19 @@ disable-over-current; status = "okay"; }; + +&usbmisc0 { + status = "okay"; +}; + +&usbmisc1 { + status = "okay"; +}; + +&usbphy0 { + status = "okay"; +}; + +&usbphy1 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/vf610.dtsi b/arch/arm/boot/dts/vf610.dtsi index 4d2ec32..5f8eb1b 100644 --- a/arch/arm/boot/dts/vf610.dtsi +++ b/arch/arm/boot/dts/vf610.dtsi @@ -7,481 +7,19 @@ * (at your option) any later version. */ -#include "skeleton.dtsi" -#include "vf610-pinfunc.h" -#include <dt-bindings/clock/vf610-clock.h> -#include <dt-bindings/interrupt-controller/irq.h> +#include "vf500.dtsi" -/ { - aliases { - can0 = &can0; - can1 = &can1; - serial0 = &uart0; - serial1 = &uart1; - serial2 = &uart2; - serial3 = &uart3; - serial4 = &uart4; - serial5 = &uart5; - gpio0 = &gpio1; - gpio1 = &gpio2; - gpio2 = &gpio3; - gpio3 = &gpio4; - gpio4 = &gpio5; - usbphy0 = &usbphy0; - usbphy1 = &usbphy1; - }; - - cpus { - #address-cells = <1>; - #size-cells = <0>; - - cpu@0 { - compatible = "arm,cortex-a5"; - device_type = "cpu"; - reg = <0x0>; - next-level-cache = <&L2>; - }; - }; - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - sxosc { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32768>; - }; - - fxosc { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <24000000>; - }; - }; - - soc { - #address-cells = <1>; - #size-cells = <1>; - compatible = "simple-bus"; - interrupt-parent = <&intc>; - ranges; - - aips0: aips-bus@40000000 { - compatible = "fsl,aips-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - interrupt-parent = <&intc>; - reg = <0x40000000 0x70000>; - ranges; - - intc: interrupt-controller@40002000 { - compatible = "arm,cortex-a9-gic"; - #interrupt-cells = <3>; - interrupt-controller; - reg = <0x40003000 0x1000>, - <0x40002100 0x100>; - }; - - L2: l2-cache@40006000 { - compatible = "arm,pl310-cache"; - reg = <0x40006000 0x1000>; - cache-unified; - cache-level = <2>; - arm,data-latency = <1 1 1>; - arm,tag-latency = <2 2 2>; - }; - - edma0: dma-controller@40018000 { - #dma-cells = <2>; - compatible = "fsl,vf610-edma"; - reg = <0x40018000 0x2000>, - <0x40024000 0x1000>, - <0x40025000 0x1000>; - interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>, - <0 9 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma-tx", "edma-err"; - dma-channels = <32>; - clock-names = "dmamux0", "dmamux1"; - clocks = <&clks VF610_CLK_DMAMUX0>, - <&clks VF610_CLK_DMAMUX1>; - }; - - can0: flexcan@40020000 { - compatible = "fsl,vf610-flexcan"; - reg = <0x40020000 0x4000>; - interrupts = <0 58 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_FLEXCAN0>, - <&clks VF610_CLK_FLEXCAN0>; - clock-names = "ipg", "per"; - status = "disabled"; - }; - - uart0: serial@40027000 { - compatible = "fsl,vf610-lpuart"; - reg = <0x40027000 0x1000>; - interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_UART0>; - clock-names = "ipg"; - dmas = <&edma0 0 2>, - <&edma0 0 3>; - dma-names = "rx","tx"; - status = "disabled"; - }; - - uart1: serial@40028000 { - compatible = "fsl,vf610-lpuart"; - reg = <0x40028000 0x1000>; - interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_UART1>; - clock-names = "ipg"; - dmas = <&edma0 0 4>, - <&edma0 0 5>; - dma-names = "rx","tx"; - status = "disabled"; - }; - - uart2: serial@40029000 { - compatible = "fsl,vf610-lpuart"; - reg = <0x40029000 0x1000>; - interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_UART2>; - clock-names = "ipg"; - dmas = <&edma0 0 6>, - <&edma0 0 7>; - dma-names = "rx","tx"; - status = "disabled"; - }; - - uart3: serial@4002a000 { - compatible = "fsl,vf610-lpuart"; - reg = <0x4002a000 0x1000>; - interrupts = <0 64 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_UART3>; - clock-names = "ipg"; - dmas = <&edma0 0 8>, - <&edma0 0 9>; - dma-names = "rx","tx"; - status = "disabled"; - }; - - dspi0: dspi0@4002c000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,vf610-dspi"; - reg = <0x4002c000 0x1000>; - interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_DSPI0>; - clock-names = "dspi"; - spi-num-chipselects = <5>; - status = "disabled"; - }; - - sai2: sai@40031000 { - compatible = "fsl,vf610-sai"; - reg = <0x40031000 0x1000>; - interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_SAI2>; - clock-names = "sai"; - dma-names = "tx", "rx"; - dmas = <&edma0 0 21>, - <&edma0 0 20>; - status = "disabled"; - }; - - pit: pit@40037000 { - compatible = "fsl,vf610-pit"; - reg = <0x40037000 0x1000>; - interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_PIT>; - clock-names = "pit"; - }; - - pwm0: pwm@40038000 { - compatible = "fsl,vf610-ftm-pwm"; - #pwm-cells = <3>; - reg = <0x40038000 0x1000>; - clock-names = "ftm_sys", "ftm_ext", - "ftm_fix", "ftm_cnt_clk_en"; - clocks = <&clks VF610_CLK_FTM0>, - <&clks VF610_CLK_FTM0_EXT_SEL>, - <&clks VF610_CLK_FTM0_FIX_SEL>, - <&clks VF610_CLK_FTM0_EXT_FIX_EN>; - status = "disabled"; - }; - - adc0: adc@4003b000 { - compatible = "fsl,vf610-adc"; - reg = <0x4003b000 0x1000>; - interrupts = <0 53 0x04>; - clocks = <&clks VF610_CLK_ADC0>; - clock-names = "adc"; - status = "disabled"; - }; - - wdog@4003e000 { - compatible = "fsl,vf610-wdt", "fsl,imx21-wdt"; - reg = <0x4003e000 0x1000>; - clocks = <&clks VF610_CLK_WDT>; - clock-names = "wdog"; - }; - - qspi0: quadspi@40044000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,vf610-qspi"; - reg = <0x40044000 0x1000>; - interrupts = <0 24 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_QSPI0_EN>, - <&clks VF610_CLK_QSPI0>; - clock-names = "qspi_en", "qspi"; - status = "disabled"; - }; - - iomuxc: iomuxc@40048000 { - compatible = "fsl,vf610-iomuxc"; - reg = <0x40048000 0x1000>; - #gpio-range-cells = <3>; - }; - - gpio1: gpio@40049000 { - compatible = "fsl,vf610-gpio"; - reg = <0x40049000 0x1000 0x400ff000 0x40>; - interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&iomuxc 0 0 32>; - }; - - gpio2: gpio@4004a000 { - compatible = "fsl,vf610-gpio"; - reg = <0x4004a000 0x1000 0x400ff040 0x40>; - interrupts = <0 108 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&iomuxc 0 32 32>; - }; - - gpio3: gpio@4004b000 { - compatible = "fsl,vf610-gpio"; - reg = <0x4004b000 0x1000 0x400ff080 0x40>; - interrupts = <0 109 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&iomuxc 0 64 32>; - }; - - gpio4: gpio@4004c000 { - compatible = "fsl,vf610-gpio"; - reg = <0x4004c000 0x1000 0x400ff0c0 0x40>; - interrupts = <0 110 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&iomuxc 0 96 32>; - }; - - gpio5: gpio@4004d000 { - compatible = "fsl,vf610-gpio"; - reg = <0x4004d000 0x1000 0x400ff100 0x40>; - interrupts = <0 111 IRQ_TYPE_LEVEL_HIGH>; - gpio-controller; - #gpio-cells = <2>; - interrupt-controller; - #interrupt-cells = <2>; - gpio-ranges = <&iomuxc 0 128 7>; - }; - - anatop: anatop@40050000 { - compatible = "fsl,vf610-anatop", "syscon"; - reg = <0x40050000 0x400>; - }; - - usbphy0: usbphy@40050800 { - compatible = "fsl,vf610-usbphy"; - reg = <0x40050800 0x400>; - interrupts = <0 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_USBPHY0>; - fsl,anatop = <&anatop>; - }; - - usbphy1: usbphy@40050c00 { - compatible = "fsl,vf610-usbphy"; - reg = <0x40050c00 0x400>; - interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_USBPHY1>; - fsl,anatop = <&anatop>; - }; - - i2c0: i2c@40066000 { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,vf610-i2c"; - reg = <0x40066000 0x1000>; - interrupts =<0 71 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_I2C0>; - clock-names = "ipg"; - dmas = <&edma0 0 50>, - <&edma0 0 51>; - dma-names = "rx","tx"; - status = "disabled"; - }; - - clks: ccm@4006b000 { - compatible = "fsl,vf610-ccm"; - reg = <0x4006b000 0x1000>; - #clock-cells = <1>; - }; - - usbdev0: usb@40034000 { - compatible = "fsl,vf610-usb", "fsl,imx27-usb"; - reg = <0x40034000 0x800>; - interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_USBC0>; - fsl,usbphy = <&usbphy0>; - fsl,usbmisc = <&usbmisc0 0>; - dr_mode = "peripheral"; - status = "disabled"; - }; - - usbmisc0: usb@40034800 { - #index-cells = <1>; - compatible = "fsl,vf610-usbmisc"; - reg = <0x40034800 0x200>; - clocks = <&clks VF610_CLK_USBC0>; - }; - }; - - aips1: aips-bus@40080000 { - compatible = "fsl,aips-bus", "simple-bus"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x40080000 0x80000>; - ranges; - - edma1: dma-controller@40098000 { - #dma-cells = <2>; - compatible = "fsl,vf610-edma"; - reg = <0x40098000 0x2000>, - <0x400a1000 0x1000>, - <0x400a2000 0x1000>; - interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>, - <0 11 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "edma-tx", "edma-err"; - dma-channels = <32>; - clock-names = "dmamux0", "dmamux1"; - clocks = <&clks VF610_CLK_DMAMUX2>, - <&clks VF610_CLK_DMAMUX3>; - }; - - uart4: serial@400a9000 { - compatible = "fsl,vf610-lpuart"; - reg = <0x400a9000 0x1000>; - interrupts = <0 65 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_UART4>; - clock-names = "ipg"; - status = "disabled"; - }; - - uart5: serial@400aa000 { - compatible = "fsl,vf610-lpuart"; - reg = <0x400aa000 0x1000>; - interrupts = <0 66 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_UART5>; - clock-names = "ipg"; - status = "disabled"; - }; - - adc1: adc@400bb000 { - compatible = "fsl,vf610-adc"; - reg = <0x400bb000 0x1000>; - interrupts = <0 54 0x04>; - clocks = <&clks VF610_CLK_ADC1>; - clock-names = "adc"; - status = "disabled"; - }; - - esdhc1: esdhc@400b2000 { - compatible = "fsl,imx53-esdhc"; - reg = <0x400b2000 0x1000>; - interrupts = <0 28 0x04>; - clocks = <&clks VF610_CLK_IPG_BUS>, - <&clks VF610_CLK_PLATFORM_BUS>, - <&clks VF610_CLK_ESDHC1>; - clock-names = "ipg", "ahb", "per"; - status = "disabled"; - }; - - usbh1: usb@400b4000 { - compatible = "fsl,vf610-usb", "fsl,imx27-usb"; - reg = <0x400b4000 0x800>; - interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_USBC1>; - fsl,usbphy = <&usbphy1>; - fsl,usbmisc = <&usbmisc1 0>; - dr_mode = "host"; - status = "disabled"; - }; - - usbmisc1: usb@400b4800 { - #index-cells = <1>; - compatible = "fsl,vf610-usbmisc"; - reg = <0x400b4800 0x200>; - clocks = <&clks VF610_CLK_USBC1>; - }; - - ftm: ftm@400b8000 { - compatible = "fsl,ftm-timer"; - reg = <0x400b8000 0x1000 0x400b9000 0x1000>; - interrupts = <0 44 IRQ_TYPE_LEVEL_HIGH>; - clock-names = "ftm-evt", "ftm-src", - "ftm-evt-counter-en", "ftm-src-counter-en"; - clocks = <&clks VF610_CLK_FTM2>, - <&clks VF610_CLK_FTM3>, - <&clks VF610_CLK_FTM2_EXT_FIX_EN>, - <&clks VF610_CLK_FTM3_EXT_FIX_EN>; - status = "disabled"; - }; - - fec0: ethernet@400d0000 { - compatible = "fsl,mvf600-fec"; - reg = <0x400d0000 0x1000>; - interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_ENET0>, - <&clks VF610_CLK_ENET0>, - <&clks VF610_CLK_ENET>; - clock-names = "ipg", "ahb", "ptp"; - status = "disabled"; - }; - - fec1: ethernet@400d1000 { - compatible = "fsl,mvf600-fec"; - reg = <0x400d1000 0x1000>; - interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_ENET1>, - <&clks VF610_CLK_ENET1>, - <&clks VF610_CLK_ENET>; - clock-names = "ipg", "ahb", "ptp"; - status = "disabled"; - }; - - can1: flexcan@400d4000 { - compatible = "fsl,vf610-flexcan"; - reg = <0x400d4000 0x4000>; - interrupts = <0 59 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&clks VF610_CLK_FLEXCAN1>, - <&clks VF610_CLK_FLEXCAN1>; - clock-names = "ipg", "per"; - status = "disabled"; - }; +&a5_cpu { + next-level-cache = <&L2>; +}; - }; +&aips0 { + L2: l2-cache@40006000 { + compatible = "arm,pl310-cache"; + reg = <0x40006000 0x1000>; + cache-unified; + cache-level = <2>; + arm,data-latency = <1 1 1>; + arm,tag-latency = <2 2 2>; }; }; diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi new file mode 100644 index 0000000..505969a --- /dev/null +++ b/arch/arm/boot/dts/vfxxx.dtsi @@ -0,0 +1,437 @@ +/* + * Copyright 2013 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include "vf610-pinfunc.h" +#include <dt-bindings/clock/vf610-clock.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + aliases { + can0 = &can0; + can1 = &can1; + serial0 = &uart0; + serial1 = &uart1; + serial2 = &uart2; + serial3 = &uart3; + serial4 = &uart4; + serial5 = &uart5; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + gpio4 = &gpio5; + usbphy0 = &usbphy0; + usbphy1 = &usbphy1; + }; + + fxosc: fxosc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + }; + + sxosc: sxosc { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + ranges; + + aips0: aips-bus@40000000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + edma0: dma-controller@40018000 { + #dma-cells = <2>; + compatible = "fsl,vf610-edma"; + reg = <0x40018000 0x2000>, + <0x40024000 0x1000>, + <0x40025000 0x1000>; + dma-channels = <32>; + clock-names = "dmamux0", "dmamux1"; + clocks = <&clks VF610_CLK_DMAMUX0>, + <&clks VF610_CLK_DMAMUX1>; + status = "disabled"; + }; + + can0: flexcan@40020000 { + compatible = "fsl,vf610-flexcan"; + reg = <0x40020000 0x4000>; + clocks = <&clks VF610_CLK_FLEXCAN0>, + <&clks VF610_CLK_FLEXCAN0>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + uart0: serial@40027000 { + compatible = "fsl,vf610-lpuart"; + reg = <0x40027000 0x1000>; + clocks = <&clks VF610_CLK_UART0>; + clock-names = "ipg"; + dmas = <&edma0 0 2>, + <&edma0 0 3>; + dma-names = "rx","tx"; + status = "disabled"; + }; + + uart1: serial@40028000 { + compatible = "fsl,vf610-lpuart"; + reg = <0x40028000 0x1000>; + clocks = <&clks VF610_CLK_UART1>; + clock-names = "ipg"; + dmas = <&edma0 0 4>, + <&edma0 0 5>; + dma-names = "rx","tx"; + status = "disabled"; + }; + + uart2: serial@40029000 { + compatible = "fsl,vf610-lpuart"; + reg = <0x40029000 0x1000>; + clocks = <&clks VF610_CLK_UART2>; + clock-names = "ipg"; + dmas = <&edma0 0 6>, + <&edma0 0 7>; + dma-names = "rx","tx"; + status = "disabled"; + }; + + uart3: serial@4002a000 { + compatible = "fsl,vf610-lpuart"; + reg = <0x4002a000 0x1000>; + clocks = <&clks VF610_CLK_UART3>; + clock-names = "ipg"; + dmas = <&edma0 0 8>, + <&edma0 0 9>; + dma-names = "rx","tx"; + status = "disabled"; + }; + + dspi0: dspi0@4002c000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-dspi"; + reg = <0x4002c000 0x1000>; + clocks = <&clks VF610_CLK_DSPI0>; + clock-names = "dspi"; + spi-num-chipselects = <5>; + status = "disabled"; + }; + + sai2: sai@40031000 { + compatible = "fsl,vf610-sai"; + reg = <0x40031000 0x1000>; + clocks = <&clks VF610_CLK_SAI2>; + clock-names = "sai"; + dma-names = "tx", "rx"; + dmas = <&edma0 0 21>, + <&edma0 0 20>; + status = "disabled"; + }; + + pit: pit@40037000 { + compatible = "fsl,vf610-pit"; + reg = <0x40037000 0x1000>; + clocks = <&clks VF610_CLK_PIT>; + clock-names = "pit"; + }; + + pwm0: pwm@40038000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x40038000 0x1000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clks VF610_CLK_FTM0>, + <&clks VF610_CLK_FTM0_EXT_SEL>, + <&clks VF610_CLK_FTM0_FIX_SEL>, + <&clks VF610_CLK_FTM0_EXT_FIX_EN>; + status = "disabled"; + }; + + pwm1: pwm@40039000 { + compatible = "fsl,vf610-ftm-pwm"; + #pwm-cells = <3>; + reg = <0x40039000 0x1000>; + clock-names = "ftm_sys", "ftm_ext", + "ftm_fix", "ftm_cnt_clk_en"; + clocks = <&clks VF610_CLK_FTM1>, + <&clks VF610_CLK_FTM1_EXT_SEL>, + <&clks VF610_CLK_FTM1_FIX_SEL>, + <&clks VF610_CLK_FTM1_EXT_FIX_EN>; + status = "disabled"; + }; + + adc0: adc@4003b000 { + compatible = "fsl,vf610-adc"; + reg = <0x4003b000 0x1000>; + clocks = <&clks VF610_CLK_ADC0>; + clock-names = "adc"; + status = "disabled"; + }; + + wdog@4003e000 { + compatible = "fsl,vf610-wdt", "fsl,imx21-wdt"; + reg = <0x4003e000 0x1000>; + clocks = <&clks VF610_CLK_WDT>; + clock-names = "wdog"; + status = "disabled"; + }; + + qspi0: quadspi@40044000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-qspi"; + reg = <0x40044000 0x1000>; + clocks = <&clks VF610_CLK_QSPI0_EN>, + <&clks VF610_CLK_QSPI0>; + clock-names = "qspi_en", "qspi"; + status = "disabled"; + }; + + iomuxc: iomuxc@40048000 { + compatible = "fsl,vf610-iomuxc"; + reg = <0x40048000 0x1000>; + #gpio-range-cells = <3>; + }; + + gpio1: gpio@40049000 { + compatible = "fsl,vf610-gpio"; + reg = <0x40049000 0x1000 0x400ff000 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 0 32>; + }; + + gpio2: gpio@4004a000 { + compatible = "fsl,vf610-gpio"; + reg = <0x4004a000 0x1000 0x400ff040 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 32 32>; + }; + + gpio3: gpio@4004b000 { + compatible = "fsl,vf610-gpio"; + reg = <0x4004b000 0x1000 0x400ff080 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 64 32>; + }; + + gpio4: gpio@4004c000 { + compatible = "fsl,vf610-gpio"; + reg = <0x4004c000 0x1000 0x400ff0c0 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 96 32>; + }; + + gpio5: gpio@4004d000 { + compatible = "fsl,vf610-gpio"; + reg = <0x4004d000 0x1000 0x400ff100 0x40>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + gpio-ranges = <&iomuxc 0 128 7>; + }; + + anatop: anatop@40050000 { + compatible = "fsl,vf610-anatop", "syscon"; + reg = <0x40050000 0x400>; + }; + + usbphy0: usbphy@40050800 { + compatible = "fsl,vf610-usbphy"; + reg = <0x40050800 0x400>; + clocks = <&clks VF610_CLK_USBPHY0>; + fsl,anatop = <&anatop>; + status = "disabled"; + }; + + usbphy1: usbphy@40050c00 { + compatible = "fsl,vf610-usbphy"; + reg = <0x40050c00 0x400>; + clocks = <&clks VF610_CLK_USBPHY1>; + fsl,anatop = <&anatop>; + status = "disabled"; + }; + + i2c0: i2c@40066000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,vf610-i2c"; + reg = <0x40066000 0x1000>; + clocks = <&clks VF610_CLK_I2C0>; + clock-names = "ipg"; + dmas = <&edma0 0 50>, + <&edma0 0 51>; + dma-names = "rx","tx"; + status = "disabled"; + }; + + clks: ccm@4006b000 { + compatible = "fsl,vf610-ccm"; + reg = <0x4006b000 0x1000>; + clocks = <&sxosc>, <&fxosc>; + clock-names = "sxosc", "fxosc"; + #clock-cells = <1>; + }; + + usbdev0: usb@40034000 { + compatible = "fsl,vf610-usb", "fsl,imx27-usb"; + reg = <0x40034000 0x800>; + clocks = <&clks VF610_CLK_USBC0>; + fsl,usbphy = <&usbphy0>; + fsl,usbmisc = <&usbmisc0 0>; + dr_mode = "peripheral"; + status = "disabled"; + }; + + usbmisc0: usb@40034800 { + #index-cells = <1>; + compatible = "fsl,vf610-usbmisc"; + reg = <0x40034800 0x200>; + clocks = <&clks VF610_CLK_USBC0>; + status = "disabled"; + }; + }; + + aips1: aips-bus@40080000 { + compatible = "fsl,aips-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + edma1: dma-controller@40098000 { + #dma-cells = <2>; + compatible = "fsl,vf610-edma"; + reg = <0x40098000 0x2000>, + <0x400a1000 0x1000>, + <0x400a2000 0x1000>; + dma-channels = <32>; + clock-names = "dmamux0", "dmamux1"; + clocks = <&clks VF610_CLK_DMAMUX2>, + <&clks VF610_CLK_DMAMUX3>; + status = "disabled"; + }; + + uart4: serial@400a9000 { + compatible = "fsl,vf610-lpuart"; + reg = <0x400a9000 0x1000>; + clocks = <&clks VF610_CLK_UART4>; + clock-names = "ipg"; + status = "disabled"; + }; + + uart5: serial@400aa000 { + compatible = "fsl,vf610-lpuart"; + reg = <0x400aa000 0x1000>; + clocks = <&clks VF610_CLK_UART5>; + clock-names = "ipg"; + status = "disabled"; + }; + + adc1: adc@400bb000 { + compatible = "fsl,vf610-adc"; + reg = <0x400bb000 0x1000>; + clocks = <&clks VF610_CLK_ADC1>; + clock-names = "adc"; + status = "disabled"; + }; + + esdhc1: esdhc@400b2000 { + compatible = "fsl,imx53-esdhc"; + reg = <0x400b2000 0x1000>; + clocks = <&clks VF610_CLK_IPG_BUS>, + <&clks VF610_CLK_PLATFORM_BUS>, + <&clks VF610_CLK_ESDHC1>; + clock-names = "ipg", "ahb", "per"; + status = "disabled"; + }; + + usbh1: usb@400b4000 { + compatible = "fsl,vf610-usb", "fsl,imx27-usb"; + reg = <0x400b4000 0x800>; + clocks = <&clks VF610_CLK_USBC1>; + fsl,usbphy = <&usbphy1>; + fsl,usbmisc = <&usbmisc1 0>; + dr_mode = "host"; + status = "disabled"; + }; + + usbmisc1: usb@400b4800 { + #index-cells = <1>; + compatible = "fsl,vf610-usbmisc"; + reg = <0x400b4800 0x200>; + clocks = <&clks VF610_CLK_USBC1>; + status = "disabled"; + }; + + ftm: ftm@400b8000 { + compatible = "fsl,ftm-timer"; + reg = <0x400b8000 0x1000 0x400b9000 0x1000>; + clock-names = "ftm-evt", "ftm-src", + "ftm-evt-counter-en", "ftm-src-counter-en"; + clocks = <&clks VF610_CLK_FTM2>, + <&clks VF610_CLK_FTM3>, + <&clks VF610_CLK_FTM2_EXT_FIX_EN>, + <&clks VF610_CLK_FTM3_EXT_FIX_EN>; + status = "disabled"; + }; + + fec0: ethernet@400d0000 { + compatible = "fsl,mvf600-fec"; + reg = <0x400d0000 0x1000>; + clocks = <&clks VF610_CLK_ENET0>, + <&clks VF610_CLK_ENET0>, + <&clks VF610_CLK_ENET>; + clock-names = "ipg", "ahb", "ptp"; + status = "disabled"; + }; + + fec1: ethernet@400d1000 { + compatible = "fsl,mvf600-fec"; + reg = <0x400d1000 0x1000>; + clocks = <&clks VF610_CLK_ENET1>, + <&clks VF610_CLK_ENET1>, + <&clks VF610_CLK_ENET>; + clock-names = "ipg", "ahb", "ptp"; + status = "disabled"; + }; + + can1: flexcan@400d4000 { + compatible = "fsl,vf610-flexcan"; + reg = <0x400d4000 0x4000>; + clocks = <&clks VF610_CLK_FLEXCAN1>, + <&clks VF610_CLK_FLEXCAN1>; + clock-names = "ipg", "per"; + status = "disabled"; + }; + + }; + }; +}; diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index e688741..e6b0007 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -97,6 +97,7 @@ CONFIG_SERIAL_IMX_CONSOLE=y # CONFIG_HW_RANDOM is not set CONFIG_I2C_CHARDEV=y CONFIG_I2C_IMX=y +CONFIG_SPI=y CONFIG_SPI_IMX=y CONFIG_SPI_SPIDEV=y CONFIG_GPIO_SYSFS=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 8fca6e2..6790f1b 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -158,6 +158,7 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_ALGOPCF=m CONFIG_I2C_ALGOPCA=m CONFIG_I2C_IMX=y +CONFIG_SPI=y CONFIG_SPI_IMX=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_MC9S08DZ60=y diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig index 11b2957..e8627e0 100644 --- a/arch/arm/mach-imx/Kconfig +++ b/arch/arm/mach-imx/Kconfig @@ -633,12 +633,41 @@ config SOC_VF610 bool "Vybrid Family VF610 support" select ARM_GIC select PINCTRL_VF610 - select VF_PIT_TIMER select PL310_ERRATA_769419 if CACHE_L2X0 help This enable support for Freescale Vybrid VF610 processor. +choice + prompt "Clocksource for scheduler clock" + depends on SOC_VF610 + default VF_USE_ARM_GLOBAL_TIMER + + config VF_USE_ARM_GLOBAL_TIMER + bool "Use ARM Global Timer" + select ARM_GLOBAL_TIMER + select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK + help + Use the ARM Global Timer as clocksource + + config VF_USE_PIT_TIMER + bool "Use PIT timer" + select VF_PIT_TIMER + help + Use SoC Periodic Interrupt Timer (PIT) as clocksource + +endchoice + +config SOC_LS1021A + bool "Freescale LS1021A support" + select ARM_GIC + select HAVE_ARM_ARCH_TIMER + select PCI_DOMAINS if PCI + select ZONE_DMA if ARM_LPAE + + help + This enable support for Freescale LS1021A processor. + endif source "arch/arm/mach-imx/devices/Kconfig" diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile index 6e4fcd8..f5ac685 100644 --- a/arch/arm/mach-imx/Makefile +++ b/arch/arm/mach-imx/Makefile @@ -12,7 +12,7 @@ obj-$(CONFIG_SOC_IMX31) += mm-imx3.o cpu-imx31.o clk-imx31.o iomux-imx31.o ehci- obj-$(CONFIG_SOC_IMX35) += mm-imx3.o cpu-imx35.o clk-imx35.o ehci-imx35.o pm-imx3.o imx5-pm-$(CONFIG_PM) += pm-imx5.o -obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o clk-imx51-imx53.o $(imx5-pm-y) +obj-$(CONFIG_SOC_IMX5) += cpu-imx5.o clk-imx51-imx53.o clk-cpu.o $(imx5-pm-y) obj-$(CONFIG_COMMON_CLK) += clk-pllv1.o clk-pllv2.o clk-pllv3.o clk-gate2.o \ clk-pfd.o clk-busy.o clk.o \ @@ -89,7 +89,7 @@ obj-$(CONFIG_HAVE_IMX_ANATOP) += anatop.o obj-$(CONFIG_HAVE_IMX_GPC) += gpc.o obj-$(CONFIG_HAVE_IMX_MMDC) += mmdc.o obj-$(CONFIG_HAVE_IMX_SRC) += src.o -ifdef CONFIG_SOC_IMX6 +ifneq ($(CONFIG_SOC_IMX6)$(CONFIG_SOC_LS1021A),) AFLAGS_headsmp.o :=-Wa,-march=armv7-a obj-$(CONFIG_SMP) += headsmp.o platsmp.o obj-$(CONFIG_HOTPLUG_CPU) += hotplug.o @@ -110,4 +110,6 @@ obj-$(CONFIG_SOC_IMX53) += mach-imx53.o obj-$(CONFIG_SOC_VF610) += clk-vf610.o mach-vf610.o +obj-$(CONFIG_SOC_LS1021A) += mach-ls1021a.o + obj-y += devices/ diff --git a/arch/arm/mach-imx/anatop.c b/arch/arm/mach-imx/anatop.c index 8259a62..7f262fe 100644 --- a/arch/arm/mach-imx/anatop.c +++ b/arch/arm/mach-imx/anatop.c @@ -30,8 +30,11 @@ #define ANADIG_DIGPROG_IMX6SL 0x280 #define BM_ANADIG_REG_2P5_ENABLE_WEAK_LINREG 0x40000 +#define BM_ANADIG_REG_2P5_ENABLE_PULLDOWN 0x8 #define BM_ANADIG_REG_CORE_FET_ODRIVE 0x20000000 #define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG 0x1000 +/* Below MISC0_DISCON_HIGH_SNVS is only for i.MX6SL */ +#define BM_ANADIG_ANA_MISC0_DISCON_HIGH_SNVS 0x2000 #define BM_ANADIG_USB_CHRG_DETECT_CHK_CHRG_B 0x80000 #define BM_ANADIG_USB_CHRG_DETECT_EN_B 0x100000 @@ -56,16 +59,43 @@ static void imx_anatop_enable_fet_odrive(bool enable) BM_ANADIG_REG_CORE_FET_ODRIVE); } +static inline void imx_anatop_enable_2p5_pulldown(bool enable) +{ + regmap_write(anatop, ANADIG_REG_2P5 + (enable ? REG_SET : REG_CLR), + BM_ANADIG_REG_2P5_ENABLE_PULLDOWN); +} + +static inline void imx_anatop_disconnect_high_snvs(bool enable) +{ + regmap_write(anatop, ANADIG_ANA_MISC0 + (enable ? REG_SET : REG_CLR), + BM_ANADIG_ANA_MISC0_DISCON_HIGH_SNVS); +} + void imx_anatop_pre_suspend(void) { - imx_anatop_enable_weak2p5(true); + if (imx_mmdc_get_ddr_type() == IMX_DDR_TYPE_LPDDR2) + imx_anatop_enable_2p5_pulldown(true); + else + imx_anatop_enable_weak2p5(true); + imx_anatop_enable_fet_odrive(true); + + if (cpu_is_imx6sl()) + imx_anatop_disconnect_high_snvs(true); } void imx_anatop_post_resume(void) { + if (imx_mmdc_get_ddr_type() == IMX_DDR_TYPE_LPDDR2) + imx_anatop_enable_2p5_pulldown(false); + else + imx_anatop_enable_weak2p5(false); + imx_anatop_enable_fet_odrive(false); - imx_anatop_enable_weak2p5(false); + + if (cpu_is_imx6sl()) + imx_anatop_disconnect_high_snvs(false); + } static void imx_anatop_usb_chrg_detect_disable(void) diff --git a/arch/arm/mach-imx/clk-cpu.c b/arch/arm/mach-imx/clk-cpu.c new file mode 100644 index 0000000..aa1c345 --- /dev/null +++ b/arch/arm/mach-imx/clk-cpu.c @@ -0,0 +1,107 @@ +/* + * Copyright (c) 2014 Lucas Stach <l.stach@pengutronix.de>, Pengutronix + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/slab.h> + +struct clk_cpu { + struct clk_hw hw; + struct clk *div; + struct clk *mux; + struct clk *pll; + struct clk *step; +}; + +static inline struct clk_cpu *to_clk_cpu(struct clk_hw *hw) +{ + return container_of(hw, struct clk_cpu, hw); +} + +static unsigned long clk_cpu_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct clk_cpu *cpu = to_clk_cpu(hw); + + return clk_get_rate(cpu->div); +} + +static long clk_cpu_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *prate) +{ + struct clk_cpu *cpu = to_clk_cpu(hw); + + return clk_round_rate(cpu->pll, rate); +} + +static int clk_cpu_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct clk_cpu *cpu = to_clk_cpu(hw); + int ret; + + /* switch to PLL bypass clock */ + ret = clk_set_parent(cpu->mux, cpu->step); + if (ret) + return ret; + + /* reprogram PLL */ + ret = clk_set_rate(cpu->pll, rate); + if (ret) { + clk_set_parent(cpu->mux, cpu->pll); + return ret; + } + /* switch back to PLL clock */ + clk_set_parent(cpu->mux, cpu->pll); + + /* Ensure the divider is what we expect */ + clk_set_rate(cpu->div, rate); + + return 0; +} + +static const struct clk_ops clk_cpu_ops = { + .recalc_rate = clk_cpu_recalc_rate, + .round_rate = clk_cpu_round_rate, + .set_rate = clk_cpu_set_rate, +}; + +struct clk *imx_clk_cpu(const char *name, const char *parent_name, + struct clk *div, struct clk *mux, struct clk *pll, + struct clk *step) +{ + struct clk_cpu *cpu; + struct clk *clk; + struct clk_init_data init; + + cpu = kzalloc(sizeof(*cpu), GFP_KERNEL); + if (!cpu) + return ERR_PTR(-ENOMEM); + + cpu->div = div; + cpu->mux = mux; + cpu->pll = pll; + cpu->step = step; + + init.name = name; + init.ops = &clk_cpu_ops; + init.flags = 0; + init.parent_names = &parent_name; + init.num_parents = 1; + + cpu->hw.init = &init; + + clk = clk_register(NULL, &cpu->hw); + if (IS_ERR(clk)) + kfree(cpu); + + return clk; +} diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 72d6521..0f7e536 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -125,6 +125,8 @@ static const char *mx53_spdif_xtal_sel[] = { "osc", "ckih", "ckih2", "pll4_sw", static const char *spdif_sel[] = { "pll1_sw", "pll2_sw", "pll3_sw", "spdif_xtal_sel", }; static const char *spdif0_com_sel[] = { "spdif0_podf", "ssi1_root_gate", }; static const char *mx51_spdif1_com_sel[] = { "spdif1_podf", "ssi2_root_gate", }; +static const char *step_sels[] = { "lp_apm", }; +static const char *cpu_podf_sels[] = { "pll1_sw", "step_sel" }; static struct clk *clk[IMX5_CLK_END]; static struct clk_onecell_data clk_data; @@ -193,7 +195,9 @@ static void __init mx5_clocks_common_init(void __iomem *ccm_base) clk[IMX5_CLK_USB_PHY_PODF] = imx_clk_divider("usb_phy_podf", "usb_phy_pred", MXC_CCM_CDCDR, 0, 3); clk[IMX5_CLK_USB_PHY_SEL] = imx_clk_mux("usb_phy_sel", MXC_CCM_CSCMR1, 26, 1, usb_phy_sel_str, ARRAY_SIZE(usb_phy_sel_str)); - clk[IMX5_CLK_CPU_PODF] = imx_clk_divider("cpu_podf", "pll1_sw", MXC_CCM_CACRR, 0, 3); + clk[IMX5_CLK_STEP_SEL] = imx_clk_mux("step_sel", MXC_CCM_CCSR, 7, 2, step_sels, ARRAY_SIZE(step_sels)); + clk[IMX5_CLK_CPU_PODF_SEL] = imx_clk_mux("cpu_podf_sel", MXC_CCM_CCSR, 2, 1, cpu_podf_sels, ARRAY_SIZE(cpu_podf_sels)); + clk[IMX5_CLK_CPU_PODF] = imx_clk_divider("cpu_podf", "cpu_podf_sel", MXC_CCM_CACRR, 0, 3); clk[IMX5_CLK_DI_PRED] = imx_clk_divider("di_pred", "pll3_sw", MXC_CCM_CDCDR, 6, 3); clk[IMX5_CLK_IIM_GATE] = imx_clk_gate2("iim_gate", "ipg", MXC_CCM_CCGR0, 30); clk[IMX5_CLK_UART1_IPG_GATE] = imx_clk_gate2("uart1_ipg_gate", "ipg", MXC_CCM_CCGR1, 6); @@ -537,6 +541,11 @@ static void __init mx53_clocks_init(struct device_node *np) clk[IMX5_CLK_CKO2] = imx_clk_gate2("cko2", "cko2_podf", MXC_CCM_CCOSR, 24); clk[IMX5_CLK_SPDIF_XTAL_SEL] = imx_clk_mux("spdif_xtal_sel", MXC_CCM_CSCMR1, 2, 2, mx53_spdif_xtal_sel, ARRAY_SIZE(mx53_spdif_xtal_sel)); + clk[IMX5_CLK_ARM] = imx_clk_cpu("arm", "cpu_podf", + clk[IMX5_CLK_CPU_PODF], + clk[IMX5_CLK_CPU_PODF_SEL], + clk[IMX5_CLK_PLL1_SW], + clk[IMX5_CLK_STEP_SEL]); imx_check_clocks(clk, ARRAY_SIZE(clk)); @@ -551,6 +560,9 @@ static void __init mx53_clocks_init(struct device_node *np) /* move can bus clk to 24MHz */ clk_set_parent(clk[IMX5_CLK_CAN_SEL], clk[IMX5_CLK_LP_APM]); + /* make sure step clock is running from 24MHz */ + clk_set_parent(clk[IMX5_CLK_STEP_SEL], clk[IMX5_CLK_LP_APM]); + clk_prepare_enable(clk[IMX5_CLK_IIM_GATE]); imx_print_silicon_rev("i.MX53", mx53_revision()); clk_disable_unprepare(clk[IMX5_CLK_IIM_GATE]); diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c index a178184..5937dde 100644 --- a/arch/arm/mach-imx/clk-vf610.c +++ b/arch/arm/mach-imx/clk-vf610.c @@ -58,8 +58,14 @@ #define PFD_PLL1_BASE (anatop_base + 0x2b0) #define PFD_PLL2_BASE (anatop_base + 0x100) #define PFD_PLL3_BASE (anatop_base + 0xf0) +#define PLL1_CTRL (anatop_base + 0x270) +#define PLL2_CTRL (anatop_base + 0x30) #define PLL3_CTRL (anatop_base + 0x10) +#define PLL4_CTRL (anatop_base + 0x70) +#define PLL5_CTRL (anatop_base + 0xe0) +#define PLL6_CTRL (anatop_base + 0xa0) #define PLL7_CTRL (anatop_base + 0x20) +#define ANA_MISC1 (anatop_base + 0x160) static void __iomem *anatop_base; static void __iomem *ccm_base; @@ -67,25 +73,34 @@ static void __iomem *ccm_base; /* sources for multiplexer clocks, this is used multiple times */ static const char *fast_sels[] = { "firc", "fxosc", }; static const char *slow_sels[] = { "sirc_32k", "sxosc", }; -static const char *pll1_sels[] = { "pll1_main", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", }; -static const char *pll2_sels[] = { "pll2_main", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", }; -static const char *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_main", "pll1_pfd_sel", "pll3_main", }; +static const char *pll1_sels[] = { "pll1_sys", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", }; +static const char *pll2_sels[] = { "pll2_bus", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", }; +static const char *pll_bypass_src_sels[] = { "fast_clk_sel", "lvds1_in", }; +static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", }; +static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", }; +static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", }; +static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", }; +static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", }; +static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", }; +static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", }; +static const char *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_bus", "pll1_pfd_sel", "pll3_usb_otg", }; static const char *ddr_sels[] = { "pll2_pfd2", "sys_sel", }; static const char *rmii_sels[] = { "enet_ext", "audio_ext", "enet_50m", "enet_25m", }; static const char *enet_ts_sels[] = { "enet_ext", "fxosc", "audio_ext", "usb", "enet_ts", "enet_25m", "enet_50m", }; -static const char *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", }; -static const char *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", }; +static const char *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", }; +static const char *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", }; static const char *nfc_sels[] = { "platform_bus", "pll1_pfd1", "pll3_pfd1", "pll3_pfd3", }; -static const char *qspi_sels[] = { "pll3_main", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", }; -static const char *esdhc_sels[] = { "pll3_main", "pll3_pfd3", "pll1_pfd3", "platform_bus", }; -static const char *dcu_sels[] = { "pll1_pfd2", "pll3_main", }; +static const char *qspi_sels[] = { "pll3_usb_otg", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", }; +static const char *esdhc_sels[] = { "pll3_usb_otg", "pll3_pfd3", "pll1_pfd3", "platform_bus", }; +static const char *dcu_sels[] = { "pll1_pfd2", "pll3_usb_otg", }; static const char *gpu_sels[] = { "pll2_pfd2", "pll3_pfd2", }; -static const char *vadc_sels[] = { "pll6_main_div", "pll3_main_div", "pll3_main", }; +static const char *vadc_sels[] = { "pll6_video_div", "pll3_usb_otg_div", "pll3_usb_otg", }; /* FTM counter clock source, not module clock */ static const char *ftm_ext_sels[] = {"sirc_128k", "sxosc", "fxosc_half", "audio_ext", }; static const char *ftm_fix_sels[] = { "sxosc", "ipg_bus", }; -static struct clk_div_table pll4_main_div_table[] = { + +static struct clk_div_table pll4_audio_div_table[] = { { .val = 0, .div = 1 }, { .val = 1, .div = 2 }, { .val = 2, .div = 6 }, @@ -105,6 +120,17 @@ static unsigned int const clks_init_on[] __initconst = { VF610_CLK_DDR_SEL, }; +static struct clk * __init vf610_get_fixed_clock( + struct device_node *ccm_node, const char *name) +{ + struct clk *clk = of_clk_get_by_name(ccm_node, name); + + /* Backward compatibility if device tree is missing clks assignments */ + if (IS_ERR(clk)) + clk = imx_obtain_fixed_clock(name, 0); + return clk; +}; + static void __init vf610_clocks_init(struct device_node *ccm_node) { struct device_node *np; @@ -115,10 +141,13 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_SIRC_32K] = imx_clk_fixed("sirc_32k", 32000); clk[VF610_CLK_FIRC] = imx_clk_fixed("firc", 24000000); - clk[VF610_CLK_SXOSC] = imx_obtain_fixed_clock("sxosc", 0); - clk[VF610_CLK_FXOSC] = imx_obtain_fixed_clock("fxosc", 0); - clk[VF610_CLK_AUDIO_EXT] = imx_obtain_fixed_clock("audio_ext", 0); - clk[VF610_CLK_ENET_EXT] = imx_obtain_fixed_clock("enet_ext", 0); + clk[VF610_CLK_SXOSC] = vf610_get_fixed_clock(ccm_node, "sxosc"); + clk[VF610_CLK_FXOSC] = vf610_get_fixed_clock(ccm_node, "fxosc"); + clk[VF610_CLK_AUDIO_EXT] = vf610_get_fixed_clock(ccm_node, "audio_ext"); + clk[VF610_CLK_ENET_EXT] = vf610_get_fixed_clock(ccm_node, "enet_ext"); + + /* Clock source from external clock via LVDs PAD */ + clk[VF610_CLK_ANACLK1] = vf610_get_fixed_clock(ccm_node, "anaclk1"); clk[VF610_CLK_FXOSC_HALF] = imx_clk_fixed_factor("fxosc_half", "fxosc", 1, 2); @@ -133,31 +162,63 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_SLOW_CLK_SEL] = imx_clk_mux("slow_clk_sel", CCM_CCSR, 4, 1, slow_sels, ARRAY_SIZE(slow_sels)); clk[VF610_CLK_FASK_CLK_SEL] = imx_clk_mux("fast_clk_sel", CCM_CCSR, 5, 1, fast_sels, ARRAY_SIZE(fast_sels)); - clk[VF610_CLK_PLL1_MAIN] = imx_clk_fixed_factor("pll1_main", "fast_clk_sel", 22, 1); - clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_main", PFD_PLL1_BASE, 0); - clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_main", PFD_PLL1_BASE, 1); - clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_main", PFD_PLL1_BASE, 2); - clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_main", PFD_PLL1_BASE, 3); - - clk[VF610_CLK_PLL2_MAIN] = imx_clk_fixed_factor("pll2_main", "fast_clk_sel", 22, 1); - clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_main", PFD_PLL2_BASE, 0); - clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_main", PFD_PLL2_BASE, 1); - clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_main", PFD_PLL2_BASE, 2); - clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_main", PFD_PLL2_BASE, 3); - - clk[VF610_CLK_PLL3_MAIN] = imx_clk_fixed_factor("pll3_main", "fast_clk_sel", 20, 1); - clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_main", PFD_PLL3_BASE, 0); - clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_main", PFD_PLL3_BASE, 1); - clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_main", PFD_PLL3_BASE, 2); - clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_main", PFD_PLL3_BASE, 3); - - clk[VF610_CLK_PLL4_MAIN] = imx_clk_fixed_factor("pll4_main", "fast_clk_sel", 25, 1); - /* Enet pll: fixed 50Mhz */ - clk[VF610_CLK_PLL5_MAIN] = imx_clk_fixed_factor("pll5_main", "fast_clk_sel", 125, 6); - /* pll6: default 960Mhz */ - clk[VF610_CLK_PLL6_MAIN] = imx_clk_fixed_factor("pll6_main", "fast_clk_sel", 40, 1); - /* pll7: USB1 PLL at 480MHz */ - clk[VF610_CLK_PLL7_MAIN] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_main", "fast_clk_sel", PLL7_CTRL, 0x2); + clk[VF610_CLK_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", PLL1_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[VF610_CLK_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", PLL2_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[VF610_CLK_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", PLL3_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[VF610_CLK_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", PLL4_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[VF610_CLK_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", PLL5_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[VF610_CLK_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", PLL6_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[VF610_CLK_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", PLL7_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + + clk[VF610_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll1", "pll1_bypass_src", PLL1_CTRL, 0x1); + clk[VF610_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", PLL2_CTRL, 0x1); + clk[VF610_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", PLL3_CTRL, 0x1); + clk[VF610_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", PLL4_CTRL, 0x7f); + clk[VF610_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll5", "pll5_bypass_src", PLL5_CTRL, 0x3); + clk[VF610_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_AV, "pll6", "pll6_bypass_src", PLL6_CTRL, 0x7f); + clk[VF610_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", PLL7_CTRL, 0x1); + + clk[VF610_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", PLL1_CTRL, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); + clk[VF610_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", PLL2_CTRL, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); + clk[VF610_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", PLL3_CTRL, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT); + clk[VF610_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", PLL4_CTRL, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT); + clk[VF610_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", PLL5_CTRL, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT); + clk[VF610_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", PLL6_CTRL, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT); + clk[VF610_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", PLL7_CTRL, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT); + + /* Do not bypass PLLs initially */ + clk_set_parent(clk[VF610_PLL1_BYPASS], clk[VF610_CLK_PLL1]); + clk_set_parent(clk[VF610_PLL2_BYPASS], clk[VF610_CLK_PLL2]); + clk_set_parent(clk[VF610_PLL3_BYPASS], clk[VF610_CLK_PLL3]); + clk_set_parent(clk[VF610_PLL4_BYPASS], clk[VF610_CLK_PLL4]); + clk_set_parent(clk[VF610_PLL5_BYPASS], clk[VF610_CLK_PLL5]); + clk_set_parent(clk[VF610_PLL6_BYPASS], clk[VF610_CLK_PLL6]); + clk_set_parent(clk[VF610_PLL7_BYPASS], clk[VF610_CLK_PLL7]); + + clk[VF610_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", PLL1_CTRL, 13); + clk[VF610_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", PLL2_CTRL, 13); + clk[VF610_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", PLL3_CTRL, 13); + clk[VF610_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", PLL4_CTRL, 13); + clk[VF610_CLK_PLL5_ENET] = imx_clk_gate("pll5_enet", "pll5_bypass", PLL5_CTRL, 13); + clk[VF610_CLK_PLL6_VIDEO] = imx_clk_gate("pll6_video", "pll6_bypass", PLL6_CTRL, 13); + clk[VF610_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", PLL7_CTRL, 13); + + clk[VF610_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", ANA_MISC1, 12, BIT(10)); + + clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_sys", PFD_PLL1_BASE, 0); + clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_sys", PFD_PLL1_BASE, 1); + clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_sys", PFD_PLL1_BASE, 2); + clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_sys", PFD_PLL1_BASE, 3); + + clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_bus", PFD_PLL2_BASE, 0); + clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_bus", PFD_PLL2_BASE, 1); + clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_bus", PFD_PLL2_BASE, 2); + clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_bus", PFD_PLL2_BASE, 3); + + clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_usb_otg", PFD_PLL3_BASE, 0); + clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_usb_otg", PFD_PLL3_BASE, 1); + clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_usb_otg", PFD_PLL3_BASE, 2); + clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_usb_otg", PFD_PLL3_BASE, 3); clk[VF610_CLK_PLL1_PFD_SEL] = imx_clk_mux("pll1_pfd_sel", CCM_CCSR, 16, 3, pll1_sels, 5); clk[VF610_CLK_PLL2_PFD_SEL] = imx_clk_mux("pll2_pfd_sel", CCM_CCSR, 19, 3, pll2_sels, 5); @@ -167,12 +228,12 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_PLATFORM_BUS] = imx_clk_divider("platform_bus", "sys_bus", CCM_CACRR, 3, 3); clk[VF610_CLK_IPG_BUS] = imx_clk_divider("ipg_bus", "platform_bus", CCM_CACRR, 11, 2); - clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_main_div", "pll3_main", CCM_CACRR, 20, 1); - clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_main_div", "pll4_main", 0, CCM_CACRR, 6, 3, 0, pll4_main_div_table, &imx_ccm_lock); - clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_main_div", "pll6_main", CCM_CACRR, 21, 1); + clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_usb_otg_div", "pll3_usb_otg", CCM_CACRR, 20, 1); + clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_audio_div", "pll4_audio", 0, CCM_CACRR, 6, 3, 0, pll4_audio_div_table, &imx_ccm_lock); + clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_video_div", "pll6_video", CCM_CACRR, 21, 1); - clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_main", PLL3_CTRL, 6); - clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_main", PLL7_CTRL, 6); + clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_usb_otg", PLL3_CTRL, 6); + clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_usb_host", PLL7_CTRL, 6); clk[VF610_CLK_USBC0] = imx_clk_gate2("usbc0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(4)); clk[VF610_CLK_USBC1] = imx_clk_gate2("usbc1", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(4)); @@ -191,8 +252,8 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_QSPI1_X1_DIV] = imx_clk_divider("qspi1_x1", "qspi1_x2", CCM_CSCDR3, 11, 1); clk[VF610_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_x1", CCM_CCGR8, CCM_CCGRx_CGn(4)); - clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_main", 1, 10); - clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_main", 1, 20); + clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_enet", 1, 10); + clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_enet", 1, 20); clk[VF610_CLK_ENET_SEL] = imx_clk_mux("enet_sel", CCM_CSCMR2, 4, 2, rmii_sels, 4); clk[VF610_CLK_ENET_TS_SEL] = imx_clk_mux("enet_ts_sel", CCM_CSCMR2, 0, 3, enet_ts_sels, 7); clk[VF610_CLK_ENET] = imx_clk_gate("enet", "enet_sel", CCM_CSCDR1, 24); diff --git a/arch/arm/mach-imx/clk.h b/arch/arm/mach-imx/clk.h index 4cdf8b6..5ef82e2 100644 --- a/arch/arm/mach-imx/clk.h +++ b/arch/arm/mach-imx/clk.h @@ -131,4 +131,8 @@ static inline struct clk *imx_clk_fixed_factor(const char *name, CLK_SET_RATE_PARENT, mult, div); } +struct clk *imx_clk_cpu(const char *name, const char *parent_name, + struct clk *div, struct clk *mux, struct clk *pll, + struct clk *step); + #endif diff --git a/arch/arm/mach-imx/common.h b/arch/arm/mach-imx/common.h index 1dabf43..fe9a908 100644 --- a/arch/arm/mach-imx/common.h +++ b/arch/arm/mach-imx/common.h @@ -116,6 +116,7 @@ void imx_anatop_post_resume(void); int imx6q_set_lpm(enum mxc_cpu_pwr_mode mode); void imx6q_set_int_mem_clk_lpm(bool enable); void imx6sl_set_wait_clk(bool enter); +int imx_mmdc_get_ddr_type(void); void imx_cpu_die(unsigned int cpu); int imx_cpu_kill(unsigned int cpu); @@ -157,5 +158,6 @@ static inline void imx_init_l2cache(void) {} #endif extern struct smp_operations imx_smp_ops; +extern struct smp_operations ls1021a_smp_ops; #endif diff --git a/arch/arm/mach-imx/mach-imx53.c b/arch/arm/mach-imx/mach-imx53.c index 03dd6ea..7587cf0 100644 --- a/arch/arm/mach-imx/mach-imx53.c +++ b/arch/arm/mach-imx/mach-imx53.c @@ -41,6 +41,8 @@ static void __init imx53_dt_init(void) static void __init imx53_init_late(void) { imx53_pm_init(); + + platform_device_register_simple("cpufreq-dt", -1, NULL, 0); } static const char * const imx53_dt_board_compat[] __initconst = { diff --git a/arch/arm/mach-imx/mach-imx6sx.c b/arch/arm/mach-imx/mach-imx6sx.c index 3de3b73..9822249 100644 --- a/arch/arm/mach-imx/mach-imx6sx.c +++ b/arch/arm/mach-imx/mach-imx6sx.c @@ -8,12 +8,62 @@ #include <linux/irqchip.h> #include <linux/of_platform.h> +#include <linux/phy.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> +#include <linux/mfd/syscon/imx6q-iomuxc-gpr.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> #include "common.h" #include "cpuidle.h" +static int ar8031_phy_fixup(struct phy_device *dev) +{ + u16 val; + + /* Set RGMII IO voltage to 1.8V */ + phy_write(dev, 0x1d, 0x1f); + phy_write(dev, 0x1e, 0x8); + + /* introduce tx clock delay */ + phy_write(dev, 0x1d, 0x5); + val = phy_read(dev, 0x1e); + val |= 0x0100; + phy_write(dev, 0x1e, val); + + return 0; +} + +#define PHY_ID_AR8031 0x004dd074 +static void __init imx6sx_enet_phy_init(void) +{ + if (IS_BUILTIN(CONFIG_PHYLIB)) + phy_register_fixup_for_uid(PHY_ID_AR8031, 0xffffffff, + ar8031_phy_fixup); +} + +static void __init imx6sx_enet_clk_sel(void) +{ + struct regmap *gpr; + + gpr = syscon_regmap_lookup_by_compatible("fsl,imx6sx-iomuxc-gpr"); + if (!IS_ERR(gpr)) { + regmap_update_bits(gpr, IOMUXC_GPR1, + IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_MASK, 0); + regmap_update_bits(gpr, IOMUXC_GPR1, + IMX6SX_GPR1_FEC_CLOCK_PAD_DIR_MASK, 0); + } else { + pr_err("failed to find fsl,imx6sx-iomux-gpr regmap\n"); + } +} + +static inline void imx6sx_enet_init(void) +{ + imx6sx_enet_phy_init(); + imx6sx_enet_clk_sel(); +} + static void __init imx6sx_init_machine(void) { struct device *parent; @@ -26,6 +76,7 @@ static void __init imx6sx_init_machine(void) of_platform_populate(NULL, of_default_bus_match_table, NULL, parent); + imx6sx_enet_init(); imx_anatop_init(); imx6sx_pm_init(); } diff --git a/arch/arm/mach-imx/mach-ls1021a.c b/arch/arm/mach-imx/mach-ls1021a.c new file mode 100644 index 0000000..b89c858 --- /dev/null +++ b/arch/arm/mach-imx/mach-ls1021a.c @@ -0,0 +1,22 @@ +/* + * Copyright 2013-2014 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#include <asm/mach/arch.h> + +#include "common.h" + +static const char * const ls1021a_dt_compat[] __initconst = { + "fsl,ls1021a", + NULL, +}; + +DT_MACHINE_START(LS1021A, "Freescale LS1021A") + .smp = smp_ops(ls1021a_smp_ops), + .dt_compat = ls1021a_dt_compat, +MACHINE_END diff --git a/arch/arm/mach-imx/mmdc.c b/arch/arm/mach-imx/mmdc.c index 7a9686a..3729d90 100644 --- a/arch/arm/mach-imx/mmdc.c +++ b/arch/arm/mach-imx/mmdc.c @@ -21,6 +21,12 @@ #define BP_MMDC_MAPSR_PSD 0 #define BP_MMDC_MAPSR_PSS 4 +#define MMDC_MDMISC 0x18 +#define BM_MMDC_MDMISC_DDR_TYPE 0x18 +#define BP_MMDC_MDMISC_DDR_TYPE 0x3 + +static int ddr_type; + static int imx_mmdc_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; @@ -31,6 +37,12 @@ static int imx_mmdc_probe(struct platform_device *pdev) mmdc_base = of_iomap(np, 0); WARN_ON(!mmdc_base); + reg = mmdc_base + MMDC_MDMISC; + /* Get ddr type */ + val = readl_relaxed(reg); + ddr_type = (val & BM_MMDC_MDMISC_DDR_TYPE) >> + BP_MMDC_MDMISC_DDR_TYPE; + reg = mmdc_base + MMDC_MAPSR; /* Enable automatic power saving */ @@ -51,6 +63,11 @@ static int imx_mmdc_probe(struct platform_device *pdev) return 0; } +int imx_mmdc_get_ddr_type(void) +{ + return ddr_type; +} + static struct of_device_id imx_mmdc_dt_ids[] = { { .compatible = "fsl,imx6q-mmdc", }, { /* sentinel */ } diff --git a/arch/arm/mach-imx/mxc.h b/arch/arm/mach-imx/mxc.h index 17a41ca..4c1343d 100644 --- a/arch/arm/mach-imx/mxc.h +++ b/arch/arm/mach-imx/mxc.h @@ -55,6 +55,8 @@ #define IMX_CHIP_REVISION_3_3 0x33 #define IMX_CHIP_REVISION_UNKNOWN 0xff +#define IMX_DDR_TYPE_LPDDR2 1 + #ifndef __ASSEMBLY__ extern unsigned int __mxc_cpu_type; #endif diff --git a/arch/arm/mach-imx/platsmp.c b/arch/arm/mach-imx/platsmp.c index 771bd25..7f27001 100644 --- a/arch/arm/mach-imx/platsmp.c +++ b/arch/arm/mach-imx/platsmp.c @@ -11,7 +11,10 @@ */ #include <linux/init.h> +#include <linux/of_address.h> +#include <linux/of.h> #include <linux/smp.h> + #include <asm/cacheflush.h> #include <asm/page.h> #include <asm/smp_scu.h> @@ -94,3 +97,33 @@ struct smp_operations imx_smp_ops __initdata = { .cpu_kill = imx_cpu_kill, #endif }; + +#define DCFG_CCSR_SCRATCHRW1 0x200 + +static int ls1021a_boot_secondary(unsigned int cpu, struct task_struct *idle) +{ + arch_send_wakeup_ipi_mask(cpumask_of(cpu)); + + return 0; +} + +static void __init ls1021a_smp_prepare_cpus(unsigned int max_cpus) +{ + struct device_node *np; + void __iomem *dcfg_base; + unsigned long paddr; + + np = of_find_compatible_node(NULL, NULL, "fsl,ls1021a-dcfg"); + dcfg_base = of_iomap(np, 0); + BUG_ON(!dcfg_base); + + paddr = virt_to_phys(secondary_startup); + writel_relaxed(cpu_to_be32(paddr), dcfg_base + DCFG_CCSR_SCRATCHRW1); + + iounmap(dcfg_base); +} + +struct smp_operations ls1021a_smp_ops __initdata = { + .smp_prepare_cpus = ls1021a_smp_prepare_cpus, + .smp_boot_secondary = ls1021a_boot_secondary, +}; diff --git a/arch/arm/mach-imx/pm-imx6.c b/arch/arm/mach-imx/pm-imx6.c index 5c3af8f..c653dd4 100644 --- a/arch/arm/mach-imx/pm-imx6.c +++ b/arch/arm/mach-imx/pm-imx6.c @@ -88,7 +88,7 @@ struct imx6_pm_base { }; struct imx6_pm_socdata { - u32 cpu_type; + u32 ddr_type; const char *mmdc_compat; const char *src_compat; const char *iomuxc_compat; @@ -138,7 +138,6 @@ static const u32 imx6sx_mmdc_io_offset[] __initconst = { }; static const struct imx6_pm_socdata imx6q_pm_data __initconst = { - .cpu_type = MXC_CPU_IMX6Q, .mmdc_compat = "fsl,imx6q-mmdc", .src_compat = "fsl,imx6q-src", .iomuxc_compat = "fsl,imx6q-iomuxc", @@ -148,7 +147,6 @@ static const struct imx6_pm_socdata imx6q_pm_data __initconst = { }; static const struct imx6_pm_socdata imx6dl_pm_data __initconst = { - .cpu_type = MXC_CPU_IMX6DL, .mmdc_compat = "fsl,imx6q-mmdc", .src_compat = "fsl,imx6q-src", .iomuxc_compat = "fsl,imx6dl-iomuxc", @@ -158,7 +156,6 @@ static const struct imx6_pm_socdata imx6dl_pm_data __initconst = { }; static const struct imx6_pm_socdata imx6sl_pm_data __initconst = { - .cpu_type = MXC_CPU_IMX6SL, .mmdc_compat = "fsl,imx6sl-mmdc", .src_compat = "fsl,imx6sl-src", .iomuxc_compat = "fsl,imx6sl-iomuxc", @@ -168,7 +165,6 @@ static const struct imx6_pm_socdata imx6sl_pm_data __initconst = { }; static const struct imx6_pm_socdata imx6sx_pm_data __initconst = { - .cpu_type = MXC_CPU_IMX6SX, .mmdc_compat = "fsl,imx6sx-mmdc", .src_compat = "fsl,imx6sx-src", .iomuxc_compat = "fsl,imx6sx-iomuxc", @@ -187,7 +183,7 @@ static const struct imx6_pm_socdata imx6sx_pm_data __initconst = { struct imx6_cpu_pm_info { phys_addr_t pbase; /* The physical address of pm_info. */ phys_addr_t resume_addr; /* The physical resume address for asm code */ - u32 cpu_type; + u32 ddr_type; u32 pm_info_size; /* Size of pm_info. */ struct imx6_pm_base mmdc_base; struct imx6_pm_base src_base; @@ -522,7 +518,7 @@ static int __init imx6q_suspend_init(const struct imx6_pm_socdata *socdata) goto pl310_cache_map_failed; } - pm_info->cpu_type = socdata->cpu_type; + pm_info->ddr_type = imx_mmdc_get_ddr_type(); pm_info->mmdc_io_num = socdata->mmdc_io_num; mmdc_offset_array = socdata->mmdc_io_offset; diff --git a/arch/arm/mach-imx/suspend-imx6.S b/arch/arm/mach-imx/suspend-imx6.S index ca4ea2d..b99987b 100644 --- a/arch/arm/mach-imx/suspend-imx6.S +++ b/arch/arm/mach-imx/suspend-imx6.S @@ -45,7 +45,7 @@ */ #define PM_INFO_PBASE_OFFSET 0x0 #define PM_INFO_RESUME_ADDR_OFFSET 0x4 -#define PM_INFO_CPU_TYPE_OFFSET 0x8 +#define PM_INFO_DDR_TYPE_OFFSET 0x8 #define PM_INFO_PM_INFO_SIZE_OFFSET 0xC #define PM_INFO_MX6Q_MMDC_P_OFFSET 0x10 #define PM_INFO_MX6Q_MMDC_V_OFFSET 0x14 @@ -110,7 +110,7 @@ ldreq r11, [r0, #PM_INFO_MX6Q_MMDC_V_OFFSET] ldrne r11, [r0, #PM_INFO_MX6Q_MMDC_P_OFFSET] - cmp r3, #MXC_CPU_IMX6SL + cmp r3, #IMX_DDR_TYPE_LPDDR2 bne 4f /* reset read FIFO, RST_RD_FIFO */ @@ -151,7 +151,7 @@ ENTRY(imx6_suspend) ldr r1, [r0, #PM_INFO_PBASE_OFFSET] ldr r2, [r0, #PM_INFO_RESUME_ADDR_OFFSET] - ldr r3, [r0, #PM_INFO_CPU_TYPE_OFFSET] + ldr r3, [r0, #PM_INFO_DDR_TYPE_OFFSET] ldr r4, [r0, #PM_INFO_PM_INFO_SIZE_OFFSET] /* @@ -209,8 +209,8 @@ poll_dvfs_set: ldr r7, [r0, #PM_INFO_MMDC_IO_NUM_OFFSET] ldr r8, =PM_INFO_MMDC_IO_VAL_OFFSET add r8, r8, r0 - /* i.MX6SL's last 3 IOs need special setting */ - cmp r3, #MXC_CPU_IMX6SL + /* LPDDR2's last 3 IOs need special setting */ + cmp r3, #IMX_DDR_TYPE_LPDDR2 subeq r7, r7, #0x3 set_mmdc_io_lpm: ldr r9, [r8], #0x8 @@ -218,7 +218,7 @@ set_mmdc_io_lpm: subs r7, r7, #0x1 bne set_mmdc_io_lpm - cmp r3, #MXC_CPU_IMX6SL + cmp r3, #IMX_DDR_TYPE_LPDDR2 bne set_mmdc_io_lpm_done ldr r6, =0x1000 ldr r9, [r8], #0x8 @@ -324,7 +324,7 @@ resume: str r7, [r11, #MX6Q_SRC_GPR1] str r7, [r11, #MX6Q_SRC_GPR2] - ldr r3, [r0, #PM_INFO_CPU_TYPE_OFFSET] + ldr r3, [r0, #PM_INFO_DDR_TYPE_OFFSET] mov r5, #0x1 resume_mmdc diff --git a/drivers/power/reset/Kconfig b/drivers/power/reset/Kconfig index f65ff49..028e765 100644 --- a/drivers/power/reset/Kconfig +++ b/drivers/power/reset/Kconfig @@ -71,6 +71,15 @@ config POWER_RESET_HISI help Reboot support for Hisilicon boards. +config POWER_RESET_IMX + bool "IMX6 power-off driver" + depends on POWER_RESET && SOC_IMX6 + help + This driver support power off external PMIC by PMIC_ON_REQ on i.mx6 + boards.If you want to use other pin to control external power,please + say N here or disable in dts to make sure pm_power_off never be + overwrote wrongly by this driver. + config POWER_RESET_MSM bool "Qualcomm MSM power-off driver" depends on ARCH_QCOM diff --git a/drivers/power/reset/Makefile b/drivers/power/reset/Makefile index 76ce1c5..1d4804d 100644 --- a/drivers/power/reset/Makefile +++ b/drivers/power/reset/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_POWER_RESET_BRCMSTB) += brcmstb-reboot.o obj-$(CONFIG_POWER_RESET_GPIO) += gpio-poweroff.o obj-$(CONFIG_POWER_RESET_GPIO_RESTART) += gpio-restart.o obj-$(CONFIG_POWER_RESET_HISI) += hisi-reboot.o +obj-$(CONFIG_POWER_RESET_IMX) += imx-snvs-poweroff.o obj-$(CONFIG_POWER_RESET_MSM) += msm-poweroff.o obj-$(CONFIG_POWER_RESET_LTC2952) += ltc2952-poweroff.o obj-$(CONFIG_POWER_RESET_QNAP) += qnap-poweroff.o diff --git a/drivers/power/reset/imx-snvs-poweroff.c b/drivers/power/reset/imx-snvs-poweroff.c new file mode 100644 index 0000000..ad6ce50 --- /dev/null +++ b/drivers/power/reset/imx-snvs-poweroff.c @@ -0,0 +1,66 @@ +/* Power off driver for i.mx6 + * Copyright (c) 2014, FREESCALE CORPORATION. All rights reserved. + * + * based on msm-poweroff.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 and + * only version 2 as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/err.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/platform_device.h> + +static void __iomem *snvs_base; + +static void do_imx_poweroff(void) +{ + u32 value = readl(snvs_base); + + /* set TOP and DP_EN bit */ + writel(value | 0x60, snvs_base); +} + +static int imx_poweroff_probe(struct platform_device *pdev) +{ + snvs_base = of_iomap(pdev->dev.of_node, 0); + if (!snvs_base) { + dev_err(&pdev->dev, "failed to get memory\n"); + return -ENODEV; + } + + pm_power_off = do_imx_poweroff; + return 0; +} + +static const struct of_device_id of_imx_poweroff_match[] = { + { .compatible = "fsl,sec-v4.0-poweroff", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_imx_poweroff_match); + +static struct platform_driver imx_poweroff_driver = { + .probe = imx_poweroff_probe, + .driver = { + .name = "imx-snvs-poweroff", + .of_match_table = of_match_ptr(of_imx_poweroff_match), + }, +}; + +static int __init imx_poweroff_init(void) +{ + return platform_driver_register(&imx_poweroff_driver); +} +device_initcall(imx_poweroff_init); diff --git a/include/dt-bindings/clock/imx5-clock.h b/include/dt-bindings/clock/imx5-clock.h index 5f2667ec..f4b7478 100644 --- a/include/dt-bindings/clock/imx5-clock.h +++ b/include/dt-bindings/clock/imx5-clock.h @@ -198,6 +198,9 @@ #define IMX5_CLK_OCRAM 186 #define IMX5_CLK_SAHARA_IPG_GATE 187 #define IMX5_CLK_SATA_REF 188 -#define IMX5_CLK_END 189 +#define IMX5_CLK_STEP_SEL 189 +#define IMX5_CLK_CPU_PODF_SEL 190 +#define IMX5_CLK_ARM 191 +#define IMX5_CLK_END 192 #endif /* __DT_BINDINGS_CLOCK_IMX5_H */ diff --git a/include/dt-bindings/clock/vf610-clock.h b/include/dt-bindings/clock/vf610-clock.h index d6b56b2..801c0ac 100644 --- a/include/dt-bindings/clock/vf610-clock.h +++ b/include/dt-bindings/clock/vf610-clock.h @@ -21,24 +21,24 @@ #define VF610_CLK_FASK_CLK_SEL 8 #define VF610_CLK_AUDIO_EXT 9 #define VF610_CLK_ENET_EXT 10 -#define VF610_CLK_PLL1_MAIN 11 +#define VF610_CLK_PLL1_SYS 11 #define VF610_CLK_PLL1_PFD1 12 #define VF610_CLK_PLL1_PFD2 13 #define VF610_CLK_PLL1_PFD3 14 #define VF610_CLK_PLL1_PFD4 15 -#define VF610_CLK_PLL2_MAIN 16 +#define VF610_CLK_PLL2_BUS 16 #define VF610_CLK_PLL2_PFD1 17 #define VF610_CLK_PLL2_PFD2 18 #define VF610_CLK_PLL2_PFD3 19 #define VF610_CLK_PLL2_PFD4 20 -#define VF610_CLK_PLL3_MAIN 21 +#define VF610_CLK_PLL3_USB_OTG 21 #define VF610_CLK_PLL3_PFD1 22 #define VF610_CLK_PLL3_PFD2 23 #define VF610_CLK_PLL3_PFD3 24 #define VF610_CLK_PLL3_PFD4 25 -#define VF610_CLK_PLL4_MAIN 26 -#define VF610_CLK_PLL5_MAIN 27 -#define VF610_CLK_PLL6_MAIN 28 +#define VF610_CLK_PLL4_AUDIO 26 +#define VF610_CLK_PLL5_ENET 27 +#define VF610_CLK_PLL6_VIDEO 28 #define VF610_CLK_PLL3_MAIN_DIV 29 #define VF610_CLK_PLL4_MAIN_DIV 30 #define VF610_CLK_PLL6_MAIN_DIV 31 @@ -166,9 +166,32 @@ #define VF610_CLK_DMAMUX3 153 #define VF610_CLK_FLEXCAN0_EN 154 #define VF610_CLK_FLEXCAN1_EN 155 -#define VF610_CLK_PLL7_MAIN 156 +#define VF610_CLK_PLL7_USB_HOST 156 #define VF610_CLK_USBPHY0 157 #define VF610_CLK_USBPHY1 158 -#define VF610_CLK_END 159 +#define VF610_CLK_LVDS1_IN 159 +#define VF610_CLK_ANACLK1 160 +#define VF610_CLK_PLL1_BYPASS_SRC 161 +#define VF610_CLK_PLL2_BYPASS_SRC 162 +#define VF610_CLK_PLL3_BYPASS_SRC 163 +#define VF610_CLK_PLL4_BYPASS_SRC 164 +#define VF610_CLK_PLL5_BYPASS_SRC 165 +#define VF610_CLK_PLL6_BYPASS_SRC 166 +#define VF610_CLK_PLL7_BYPASS_SRC 167 +#define VF610_CLK_PLL1 168 +#define VF610_CLK_PLL2 169 +#define VF610_CLK_PLL3 170 +#define VF610_CLK_PLL4 171 +#define VF610_CLK_PLL5 172 +#define VF610_CLK_PLL6 173 +#define VF610_CLK_PLL7 174 +#define VF610_PLL1_BYPASS 175 +#define VF610_PLL2_BYPASS 176 +#define VF610_PLL3_BYPASS 177 +#define VF610_PLL4_BYPASS 178 +#define VF610_PLL5_BYPASS 179 +#define VF610_PLL6_BYPASS 180 +#define VF610_PLL7_BYPASS 181 +#define VF610_CLK_END 182 #endif /* __DT_BINDINGS_CLOCK_VF610_H */ diff --git a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h index ff44374..c877cad 100644 --- a/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h +++ b/include/linux/mfd/syscon/imx6q-iomuxc-gpr.h @@ -395,4 +395,43 @@ #define IMX6SL_GPR1_FEC_CLOCK_MUX1_SEL_MASK (0x3 << 17) #define IMX6SL_GPR1_FEC_CLOCK_MUX2_SEL_MASK (0x1 << 14) +/* For imx6sx iomux gpr register field define */ +#define IMX6SX_GPR1_VDEC_SW_RST_MASK (0x1 << 20) +#define IMX6SX_GPR1_VDEC_SW_RST_RESET (0x1 << 20) +#define IMX6SX_GPR1_VDEC_SW_RST_RELEASE (0x0 << 20) +#define IMX6SX_GPR1_VADC_SW_RST_MASK (0x1 << 19) +#define IMX6SX_GPR1_VADC_SW_RST_RESET (0x1 << 19) +#define IMX6SX_GPR1_VADC_SW_RST_RELEASE (0x0 << 19) +#define IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_MASK (0x3 << 13) +#define IMX6SX_GPR1_FEC_CLOCK_PAD_DIR_MASK (0x3 << 17) +#define IMX6SX_GPR1_FEC_CLOCK_MUX_SEL_EXT (0x3 << 13) + +#define IMX6SX_GPR4_FEC_ENET1_STOP_REQ (0x1 << 3) +#define IMX6SX_GPR4_FEC_ENET2_STOP_REQ (0x1 << 4) + +#define IMX6SX_GPR5_DISP_MUX_LDB_CTRL_MASK (0x1 << 3) +#define IMX6SX_GPR5_DISP_MUX_LDB_CTRL_LCDIF1 (0x0 << 3) +#define IMX6SX_GPR5_DISP_MUX_LDB_CTRL_LCDIF2 (0x1 << 3) + +#define IMX6SX_GPR5_CSI2_MUX_CTRL_MASK (0x3 << 27) +#define IMX6SX_GPR5_CSI2_MUX_CTRL_EXT_PIN (0x0 << 27) +#define IMX6SX_GPR5_CSI2_MUX_CTRL_CVD (0x1 << 27) +#define IMX6SX_GPR5_CSI2_MUX_CTRL_VDAC_TO_CSI (0x2 << 27) +#define IMX6SX_GPR5_CSI2_MUX_CTRL_GND (0x3 << 27) +#define IMX6SX_GPR5_VADC_TO_CSI_CAPTURE_EN_MASK (0x1 << 26) +#define IMX6SX_GPR5_VADC_TO_CSI_CAPTURE_EN_ENABLE (0x1 << 26) +#define IMX6SX_GPR5_VADC_TO_CSI_CAPTURE_EN_DISABLE (0x0 << 26) +#define IMX6SX_GPR5_CSI1_MUX_CTRL_MASK (0x3 << 4) +#define IMX6SX_GPR5_CSI1_MUX_CTRL_EXT_PIN (0x0 << 4) +#define IMX6SX_GPR5_CSI1_MUX_CTRL_CVD (0x1 << 4) +#define IMX6SX_GPR5_CSI1_MUX_CTRL_VDAC_TO_CSI (0x2 << 4) +#define IMX6SX_GPR5_CSI1_MUX_CTRL_GND (0x3 << 4) + +#define IMX6SX_GPR5_DISP_MUX_DCIC2_LCDIF2 (0x0 << 2) +#define IMX6SX_GPR5_DISP_MUX_DCIC2_LVDS (0x1 << 2) +#define IMX6SX_GPR5_DISP_MUX_DCIC2_MASK (0x1 << 2) +#define IMX6SX_GPR5_DISP_MUX_DCIC1_LCDIF1 (0x0 << 1) +#define IMX6SX_GPR5_DISP_MUX_DCIC1_LVDS (0x1 << 1) +#define IMX6SX_GPR5_DISP_MUX_DCIC1_MASK (0x1 << 1) + #endif /* __LINUX_IMX6Q_IOMUXC_GPR_H */ |