ixgbe: add support for X550 source_address_prunning

This patch will enable X550 Source Address Prunning for VEPA
bridge mode.  This requires that we also have replication enabled
as well, while in this mode.

Signed-off-by: Don Skidmore <donald.c.skidmore@intel.com>
Tested-by: Phil Schmitt <phillip.j.schmitt@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

3 files changed, 77 insertions, 0 deletions

diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
index cb9c43f..c696ad72 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c
@@ -7880,13 +7880,57 @@ static int ixgbe_ndo_fdb_add(struct ndmsg *ndm, struct nlattr *tb[],
 static int ixgbe_configure_bridge_mode(struct ixgbe_adapter *adapter,
 				       __u16 mode)
 {
+	struct ixgbe_hw *hw = &adapter->hw;
+	unsigned int p, num_pools;
+	u32 vmdctl;
+
 	switch (mode) {
 	case BRIDGE_MODE_VEPA:
+		/* disable Tx loopback, rely on switch hairpin mode */
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_PFDTXGSWC, 0);
+
+		/* must enable Rx switching replication to allow multicast
+		 * packet reception on all VFs, and to enable source address
+		 * pruning.
+		 */
+		vmdctl = IXGBE_READ_REG(hw, IXGBE_VMD_CTL);
+		vmdctl |= IXGBE_VT_CTL_REPLEN;
+		IXGBE_WRITE_REG(hw, IXGBE_VMD_CTL, vmdctl);
+
+		/* enable Rx source address pruning. Note, this requires
+		 * replication to be enabled or else it does nothing.
+		 */
+		num_pools = adapter->num_vfs + adapter->num_rx_pools;
+		for (p = 0; p < num_pools; p++) {
+			if (hw->mac.ops.set_source_address_pruning)
+				hw->mac.ops.set_source_address_pruning(hw,
+								       true,
+								       p);
+		}
 		break;
 	case BRIDGE_MODE_VEB:
+		/* enable Tx loopback for internal VF/PF communication */
 		IXGBE_WRITE_REG(&adapter->hw, IXGBE_PFDTXGSWC,
 				IXGBE_PFDTXGSWC_VT_LBEN);
+
+		/* disable Rx switching replication unless we have SR-IOV
+		 * virtual functions
+		 */
+		vmdctl = IXGBE_READ_REG(hw, IXGBE_VMD_CTL);
+		if (!adapter->num_vfs)
+			vmdctl &= ~IXGBE_VT_CTL_REPLEN;
+		IXGBE_WRITE_REG(hw, IXGBE_VMD_CTL, vmdctl);
+
+		/* disable Rx source address pruning, since we don't expect to
+		 * be receiving external loopback of our transmitted frames.
+		 */
+		num_pools = adapter->num_vfs + adapter->num_rx_pools;
+		for (p = 0; p < num_pools; p++) {
+			if (hw->mac.ops.set_source_address_pruning)
+				hw->mac.ops.set_source_address_pruning(hw,
+								       false,
+								       p);
+		}
 		break;
 	default:
 		return -EINVAL;
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
index c3ddc94..8e39309 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h
@@ -285,6 +285,8 @@ struct ixgbe_thermal_sensor_data {
 #define IXGBE_VLVF(_i)  (0x0F100 + ((_i) * 4))  /* 64 of these (0-63) */
 #define IXGBE_VLVFB(_i) (0x0F200 + ((_i) * 4))  /* 128 of these (0-127) */
 #define IXGBE_VMVIR(_i) (0x08000 + ((_i) * 4))  /* 64 of these (0-63) */
+#define IXGBE_PFFLPL	0x050B0
+#define IXGBE_PFFLPH	0x050B4
 #define IXGBE_VT_CTL         0x051B0
 #define IXGBE_PFMAILBOX(_i)  (0x04B00 + (4 * (_i))) /* 64 total */
 #define IXGBE_PFMBMEM(_i)    (0x13000 + (64 * (_i))) /* 64 Mailboxes, 16 DW each */
@@ -3069,6 +3071,8 @@ struct ixgbe_mac_operations {
 	s32 (*init_thermal_sensor_thresh)(struct ixgbe_hw *hw);
 	void (*disable_rx)(struct ixgbe_hw *hw);
 	void (*enable_rx)(struct ixgbe_hw *hw);
+	void (*set_source_address_pruning)(struct ixgbe_hw *, bool,
+					   unsigned int);
 	void (*set_ethertype_anti_spoofing)(struct ixgbe_hw *, bool, int);
 
 	/* DMA Coalescing */
diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
index 58a3155..cf5cf81 100644
--- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
+++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c
@@ -1363,6 +1363,33 @@ static void ixgbe_set_ethertype_anti_spoofing_X550(struct ixgbe_hw *hw,
 	IXGBE_WRITE_REG(hw, IXGBE_PFVFSPOOF(vf_target_reg), pfvfspoof);
 }
 
+/** ixgbe_set_source_address_pruning_X550 - Enable/Disbale src address pruning
+ *  @hw: pointer to hardware structure
+ *  @enable: enable or disable source address pruning
+ *  @pool: Rx pool to set source address pruning for
+ **/
+static void ixgbe_set_source_address_pruning_X550(struct ixgbe_hw *hw,
+						  bool enable,
+						  unsigned int pool)
+{
+	u64 pfflp;
+
+	/* max rx pool is 63 */
+	if (pool > 63)
+		return;
+
+	pfflp = (u64)IXGBE_READ_REG(hw, IXGBE_PFFLPL);
+	pfflp |= (u64)IXGBE_READ_REG(hw, IXGBE_PFFLPH) << 32;
+
+	if (enable)
+		pfflp |= (1ULL << pool);
+	else
+		pfflp &= ~(1ULL << pool);
+
+	IXGBE_WRITE_REG(hw, IXGBE_PFFLPL, (u32)pfflp);
+	IXGBE_WRITE_REG(hw, IXGBE_PFFLPH, (u32)(pfflp >> 32));
+}
+
 #define X550_COMMON_MAC \
 	.init_hw			= &ixgbe_init_hw_generic, \
 	.start_hw			= &ixgbe_start_hw_X540, \
@@ -1397,6 +1424,8 @@ static void ixgbe_set_ethertype_anti_spoofing_X550(struct ixgbe_hw *hw,
 	.init_uta_tables		= &ixgbe_init_uta_tables_generic, \
 	.set_mac_anti_spoofing		= &ixgbe_set_mac_anti_spoofing, \
 	.set_vlan_anti_spoofing		= &ixgbe_set_vlan_anti_spoofing, \
+	.set_source_address_pruning	= \
+				&ixgbe_set_source_address_pruning_X550, \
 	.set_ethertype_anti_spoofing	= \
 				&ixgbe_set_ethertype_anti_spoofing_X550, \
 	.acquire_swfw_sync		= &ixgbe_acquire_swfw_sync_X540, \