diff options
author | Nicolas Ferre <nicolas.ferre@atmel.com> | 2016-04-26 10:11:28 (GMT) |
---|---|---|
committer | Nicolas Ferre <nicolas.ferre@atmel.com> | 2016-04-27 12:08:58 (GMT) |
commit | 88677db54dba68ce19952d5bcdf0fda43094b31f (patch) | |
tree | c1e1a292606d3268d916a076a7e3f306591c353a | |
parent | 517550075c31917dc729d7cec0b4a0ca65294f14 (diff) | |
download | linux-88677db54dba68ce19952d5bcdf0fda43094b31f.tar.xz |
ARM: dts: at91: VInCo: fix phy reset gpio flag
Fix gpio active flag for the phy reset-gpios property. The line is
active low instead of active high.
Actually, this flags was never used by the macb driver.
Reported-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
-rw-r--r-- | arch/arm/boot/dts/at91-vinco.dts | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/arch/arm/boot/dts/at91-vinco.dts b/arch/arm/boot/dts/at91-vinco.dts index 79aec55..6a366ee 100644 --- a/arch/arm/boot/dts/at91-vinco.dts +++ b/arch/arm/boot/dts/at91-vinco.dts @@ -118,7 +118,7 @@ ethernet-phy@1 { reg = <0x1>; - reset-gpios = <&pioE 8 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pioE 8 GPIO_ACTIVE_LOW>; interrupt-parent = <&pioB>; interrupts = <15 IRQ_TYPE_EDGE_FALLING>; }; @@ -162,7 +162,7 @@ reg = <0x1>; interrupt-parent = <&pioB>; interrupts = <31 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&pioE 6 GPIO_ACTIVE_HIGH>; + reset-gpios = <&pioE 6 GPIO_ACTIVE_LOW>; }; }; |