diff options
author | Ingo Molnar <mingo@kernel.org> | 2016-07-14 11:01:15 (GMT) |
---|---|---|
committer | Ingo Molnar <mingo@kernel.org> | 2016-07-14 11:01:15 (GMT) |
commit | 8b3843996d7ce863b6057287421e8f539b5ffd15 (patch) | |
tree | 9d0cb01f0432fe1424b549609f2c81516dde1f03 | |
parent | 92d21ac74a9e3c09b0b01c764e530657e4c85c49 (diff) | |
parent | 05f310e26fe9d97fec0ce1752edc16bf1ea55a2d (diff) | |
download | linux-8b3843996d7ce863b6057287421e8f539b5ffd15.tar.xz |
Merge branch 'x86/platform' into x86/headers, to apply dependent patches
Signed-off-by: Ingo Molnar <mingo@kernel.org>
25 files changed, 955 insertions, 143 deletions
diff --git a/arch/x86/include/asm/intel-mid.h b/arch/x86/include/asm/intel-mid.h index 7c5af12..9d6b097 100644 --- a/arch/x86/include/asm/intel-mid.h +++ b/arch/x86/include/asm/intel-mid.h @@ -12,9 +12,17 @@ #define _ASM_X86_INTEL_MID_H #include <linux/sfi.h> +#include <linux/pci.h> #include <linux/platform_device.h> extern int intel_mid_pci_init(void); +extern int intel_mid_pci_set_power_state(struct pci_dev *pdev, pci_power_t state); + +#define INTEL_MID_PWR_LSS_OFFSET 4 +#define INTEL_MID_PWR_LSS_TYPE (1 << 7) + +extern int intel_mid_pwr_get_lss_id(struct pci_dev *pdev); + extern int get_gpio_by_name(const char *name); extern void intel_scu_device_register(struct platform_device *pdev); extern int __init sfi_parse_mrtc(struct sfi_table_header *table); @@ -34,13 +42,28 @@ struct devs_id { void *(*get_platform_data)(void *info); /* Custom handler for devices */ void (*device_handler)(struct sfi_device_table_entry *pentry, - struct devs_id *dev); + struct devs_id *dev); }; -#define sfi_device(i) \ - static const struct devs_id *const __intel_mid_sfi_##i##_dev __used \ +#define sfi_device(i) \ + static const struct devs_id *const __intel_mid_sfi_##i##_dev __used \ __attribute__((__section__(".x86_intel_mid_dev.init"))) = &i +/** +* struct mid_sd_board_info - template for SD device creation +* @name: identifies the driver +* @bus_num: board-specific identifier for a given SD controller +* @max_clk: the maximum frequency device supports +* @platform_data: the particular data stored there is driver-specific +*/ +struct mid_sd_board_info { + char name[SFI_NAME_LEN]; + int bus_num; + unsigned short addr; + u32 max_clk; + void *platform_data; +}; + /* * Medfield is the follow-up of Moorestown, it combines two chip solution into * one. Other than that it also added always-on and constant tsc and lapic @@ -60,7 +83,7 @@ extern enum intel_mid_cpu_type __intel_mid_cpu_chip; /** * struct intel_mid_ops - Interface between intel-mid & sub archs * @arch_setup: arch_setup function to re-initialize platform - * structures (x86_init, x86_platform_init) + * structures (x86_init, x86_platform_init) * * This structure can be extended if any new interface is required * between intel-mid & its sub arch files. @@ -70,20 +93,20 @@ struct intel_mid_ops { }; /* Helper API's for INTEL_MID_OPS_INIT */ -#define DECLARE_INTEL_MID_OPS_INIT(cpuname, cpuid) \ - [cpuid] = get_##cpuname##_ops +#define DECLARE_INTEL_MID_OPS_INIT(cpuname, cpuid) \ + [cpuid] = get_##cpuname##_ops /* Maximum number of CPU ops */ -#define MAX_CPU_OPS(a) (sizeof(a)/sizeof(void *)) +#define MAX_CPU_OPS(a) (sizeof(a)/sizeof(void *)) /* * For every new cpu addition, a weak get_<cpuname>_ops() function needs be * declared in arch/x86/platform/intel_mid/intel_mid_weak_decls.h. */ -#define INTEL_MID_OPS_INIT {\ - DECLARE_INTEL_MID_OPS_INIT(penwell, INTEL_MID_CPU_CHIP_PENWELL), \ - DECLARE_INTEL_MID_OPS_INIT(cloverview, INTEL_MID_CPU_CHIP_CLOVERVIEW), \ - DECLARE_INTEL_MID_OPS_INIT(tangier, INTEL_MID_CPU_CHIP_TANGIER) \ +#define INTEL_MID_OPS_INIT { \ + DECLARE_INTEL_MID_OPS_INIT(penwell, INTEL_MID_CPU_CHIP_PENWELL), \ + DECLARE_INTEL_MID_OPS_INIT(cloverview, INTEL_MID_CPU_CHIP_CLOVERVIEW), \ + DECLARE_INTEL_MID_OPS_INIT(tangier, INTEL_MID_CPU_CHIP_TANGIER) \ }; #ifdef CONFIG_X86_INTEL_MID @@ -100,8 +123,8 @@ static inline bool intel_mid_has_msic(void) #else /* !CONFIG_X86_INTEL_MID */ -#define intel_mid_identify_cpu() (0) -#define intel_mid_has_msic() (0) +#define intel_mid_identify_cpu() 0 +#define intel_mid_has_msic() 0 #endif /* !CONFIG_X86_INTEL_MID */ @@ -117,35 +140,38 @@ extern enum intel_mid_timer_options intel_mid_timer_options; * Penwell uses spread spectrum clock, so the freq number is not exactly * the same as reported by MSR based on SDM. */ -#define FSB_FREQ_83SKU 83200 -#define FSB_FREQ_100SKU 99840 -#define FSB_FREQ_133SKU 133000 +#define FSB_FREQ_83SKU 83200 +#define FSB_FREQ_100SKU 99840 +#define FSB_FREQ_133SKU 133000 -#define FSB_FREQ_167SKU 167000 -#define FSB_FREQ_200SKU 200000 -#define FSB_FREQ_267SKU 267000 -#define FSB_FREQ_333SKU 333000 -#define FSB_FREQ_400SKU 400000 +#define FSB_FREQ_167SKU 167000 +#define FSB_FREQ_200SKU 200000 +#define FSB_FREQ_267SKU 267000 +#define FSB_FREQ_333SKU 333000 +#define FSB_FREQ_400SKU 400000 /* Bus Select SoC Fuse value */ -#define BSEL_SOC_FUSE_MASK 0x7 -#define BSEL_SOC_FUSE_001 0x1 /* FSB 133MHz */ -#define BSEL_SOC_FUSE_101 0x5 /* FSB 100MHz */ -#define BSEL_SOC_FUSE_111 0x7 /* FSB 83MHz */ +#define BSEL_SOC_FUSE_MASK 0x7 +/* FSB 133MHz */ +#define BSEL_SOC_FUSE_001 0x1 +/* FSB 100MHz */ +#define BSEL_SOC_FUSE_101 0x5 +/* FSB 83MHz */ +#define BSEL_SOC_FUSE_111 0x7 -#define SFI_MTMR_MAX_NUM 8 -#define SFI_MRTC_MAX 8 +#define SFI_MTMR_MAX_NUM 8 +#define SFI_MRTC_MAX 8 extern void intel_scu_devices_create(void); extern void intel_scu_devices_destroy(void); /* VRTC timer */ -#define MRST_VRTC_MAP_SZ (1024) -/*#define MRST_VRTC_PGOFFSET (0xc00) */ +#define MRST_VRTC_MAP_SZ 1024 +/* #define MRST_VRTC_PGOFFSET 0xc00 */ extern void intel_mid_rtc_init(void); -/* the offset for the mapping of global gpio pin to irq */ -#define INTEL_MID_IRQ_OFFSET 0x100 +/* The offset for the mapping of global gpio pin to irq */ +#define INTEL_MID_IRQ_OFFSET 0x100 #endif /* _ASM_X86_INTEL_MID_H */ diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h index 7f991bd5..c9a4ed7 100644 --- a/arch/x86/include/asm/topology.h +++ b/arch/x86/include/asm/topology.h @@ -25,16 +25,6 @@ #ifndef _ASM_X86_TOPOLOGY_H #define _ASM_X86_TOPOLOGY_H -#ifdef CONFIG_X86_32 -# ifdef CONFIG_SMP -# define ENABLE_TOPO_DEFINES -# endif -#else -# ifdef CONFIG_SMP -# define ENABLE_TOPO_DEFINES -# endif -#endif - /* * to preserve the visibility of NUMA_NO_NODE definition, * moved to there from here. May be used independent of @@ -123,7 +113,7 @@ extern const struct cpumask *cpu_coregroup_mask(int cpu); #define topology_physical_package_id(cpu) (cpu_data(cpu).phys_proc_id) #define topology_core_id(cpu) (cpu_data(cpu).cpu_core_id) -#ifdef ENABLE_TOPO_DEFINES +#ifdef CONFIG_SMP #define topology_core_cpumask(cpu) (per_cpu(cpu_core_map, cpu)) #define topology_sibling_cpumask(cpu) (per_cpu(cpu_sibling_map, cpu)) diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index 6e2ffbe..c1a89bc 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -300,15 +300,14 @@ static void intel_workarounds(struct cpuinfo_x86 *c) } /* - * P4 Xeon errata 037 workaround. + * P4 Xeon erratum 037 workaround. * Hardware prefetcher may cause stale data to be loaded into the cache. */ if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) { if (msr_set_bit(MSR_IA32_MISC_ENABLE, - MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE_BIT) - > 0) { + MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE_BIT) > 0) { pr_info("CPU: C0 stepping P4 Xeon detected.\n"); - pr_info("CPU: Disabling hardware prefetching (Errata 037)\n"); + pr_info("CPU: Disabling hardware prefetching (Erratum 037)\n"); } } diff --git a/arch/x86/pci/intel_mid_pci.c b/arch/x86/pci/intel_mid_pci.c index 8b93e63..5a18aed 100644 --- a/arch/x86/pci/intel_mid_pci.c +++ b/arch/x86/pci/intel_mid_pci.c @@ -36,7 +36,8 @@ #define PCIE_CAP_OFFSET 0x100 /* Quirks for the listed devices */ -#define PCI_DEVICE_ID_INTEL_MRFL_MMC 0x1190 +#define PCI_DEVICE_ID_INTEL_MRFLD_MMC 0x1190 +#define PCI_DEVICE_ID_INTEL_MRFLD_HSU 0x1191 /* Fixed BAR fields */ #define PCIE_VNDR_CAP_ID_FIXED_BAR 0x00 /* Fixed BAR (TBD) */ @@ -225,13 +226,20 @@ static int intel_mid_pci_irq_enable(struct pci_dev *dev) /* Special treatment for IRQ0 */ if (dev->irq == 0) { /* + * Skip HS UART common registers device since it has + * IRQ0 assigned and not used by the kernel. + */ + if (dev->device == PCI_DEVICE_ID_INTEL_MRFLD_HSU) + return -EBUSY; + /* * TNG has IRQ0 assigned to eMMC controller. But there * are also other devices with bogus PCI configuration * that have IRQ0 assigned. This check ensures that - * eMMC gets it. + * eMMC gets it. The rest of devices still could be + * enabled without interrupt line being allocated. */ - if (dev->device != PCI_DEVICE_ID_INTEL_MRFL_MMC) - return -EBUSY; + if (dev->device != PCI_DEVICE_ID_INTEL_MRFLD_MMC) + return 0; } break; default: @@ -308,14 +316,39 @@ static void pci_d3delay_fixup(struct pci_dev *dev) } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, pci_d3delay_fixup); -static void mrst_power_off_unused_dev(struct pci_dev *dev) +static void mid_power_off_one_device(struct pci_dev *dev) { + u16 pmcsr; + + /* + * Update current state first, otherwise PCI core enforces PCI_D0 in + * pci_set_power_state() for devices which status was PCI_UNKNOWN. + */ + pci_read_config_word(dev, dev->pm_cap + PCI_PM_CTRL, &pmcsr); + dev->current_state = (pci_power_t __force)(pmcsr & PCI_PM_CTRL_STATE_MASK); + pci_set_power_state(dev, PCI_D3hot); } -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0801, mrst_power_off_unused_dev); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0809, mrst_power_off_unused_dev); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x080C, mrst_power_off_unused_dev); -DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, 0x0815, mrst_power_off_unused_dev); + +static void mid_power_off_devices(struct pci_dev *dev) +{ + int id; + + if (!pci_soc_mode) + return; + + id = intel_mid_pwr_get_lss_id(dev); + if (id < 0) + return; + + /* + * This sets only PMCSR bits. The actual power off will happen in + * arch/x86/platform/intel-mid/pwr.c. + */ + mid_power_off_one_device(dev); +} + +DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_INTEL, PCI_ANY_ID, mid_power_off_devices); /* * Langwell devices reside at fixed offsets, don't try to move them. diff --git a/arch/x86/platform/atom/punit_atom_debug.c b/arch/x86/platform/atom/punit_atom_debug.c index 81c769e..8ff7b93 100644 --- a/arch/x86/platform/atom/punit_atom_debug.c +++ b/arch/x86/platform/atom/punit_atom_debug.c @@ -23,10 +23,9 @@ #include <linux/seq_file.h> #include <linux/io.h> #include <asm/cpu_device_id.h> +#include <asm/intel-family.h> #include <asm/iosf_mbi.h> -/* Power gate status reg */ -#define PWRGT_STATUS 0x61 /* Subsystem config/status Video processor */ #define VED_SS_PM0 0x32 /* Subsystem config/status ISP (Image Signal Processor) */ @@ -35,12 +34,16 @@ #define MIO_SS_PM 0x3B /* Shift bits for getting status for video, isp and i/o */ #define SSS_SHIFT 24 + +/* Power gate status reg */ +#define PWRGT_STATUS 0x61 /* Shift bits for getting status for graphics rendering */ #define RENDER_POS 0 /* Shift bits for getting status for media control */ #define MEDIA_POS 2 /* Shift bits for getting status for Valley View/Baytrail display */ #define VLV_DISPLAY_POS 6 + /* Subsystem config/status display for Cherry Trail SOC */ #define CHT_DSP_SSS 0x36 /* Shift bits for getting status for display */ @@ -52,6 +55,14 @@ struct punit_device { int sss_pos; }; +static const struct punit_device punit_device_tng[] = { + { "DISPLAY", CHT_DSP_SSS, SSS_SHIFT }, + { "VED", VED_SS_PM0, SSS_SHIFT }, + { "ISP", ISP_SS_PM0, SSS_SHIFT }, + { "MIO", MIO_SS_PM, SSS_SHIFT }, + { NULL } +}; + static const struct punit_device punit_device_byt[] = { { "GFX RENDER", PWRGT_STATUS, RENDER_POS }, { "GFX MEDIA", PWRGT_STATUS, MEDIA_POS }, @@ -143,8 +154,9 @@ static void punit_dbgfs_unregister(void) (kernel_ulong_t)&drv_data } static const struct x86_cpu_id intel_punit_cpu_ids[] = { - ICPU(55, punit_device_byt), /* Valleyview, Bay Trail */ - ICPU(76, punit_device_cht), /* Braswell, Cherry Trail */ + ICPU(INTEL_FAM6_ATOM_SILVERMONT1, punit_device_byt), + ICPU(INTEL_FAM6_ATOM_MERRIFIELD1, punit_device_tng), + ICPU(INTEL_FAM6_ATOM_AIRMONT, punit_device_cht), {} }; diff --git a/arch/x86/platform/intel-mid/Makefile b/arch/x86/platform/intel-mid/Makefile index 0ce1b19..fa021df 100644 --- a/arch/x86/platform/intel-mid/Makefile +++ b/arch/x86/platform/intel-mid/Makefile @@ -1,4 +1,4 @@ -obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o intel_mid_vrtc.o mfld.o mrfl.o +obj-$(CONFIG_X86_INTEL_MID) += intel-mid.o intel_mid_vrtc.o mfld.o mrfld.o pwr.o # SFI specific code ifdef CONFIG_X86_INTEL_MID diff --git a/arch/x86/platform/intel-mid/device_libs/Makefile b/arch/x86/platform/intel-mid/device_libs/Makefile index 91ec9f8..fc135bf 100644 --- a/arch/x86/platform/intel-mid/device_libs/Makefile +++ b/arch/x86/platform/intel-mid/device_libs/Makefile @@ -1,3 +1,5 @@ +# Family-Level Interface Shim (FLIS) +obj-$(subst m,y,$(CONFIG_PINCTRL_MERRIFIELD)) += platform_mrfld_pinctrl.o # IPC Devices obj-y += platform_ipc.o obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic.o @@ -8,14 +10,18 @@ obj-$(subst m,y,$(CONFIG_MFD_INTEL_MSIC)) += platform_msic_battery.o obj-$(subst m,y,$(CONFIG_INTEL_MID_POWER_BUTTON)) += platform_msic_power_btn.o obj-$(subst m,y,$(CONFIG_GPIO_INTEL_PMIC)) += platform_pmic_gpio.o obj-$(subst m,y,$(CONFIG_INTEL_MFLD_THERMAL)) += platform_msic_thermal.o +# SPI Devices +obj-$(subst m,y,$(CONFIG_SPI_SPIDEV)) += platform_spidev.o # I2C Devices obj-$(subst m,y,$(CONFIG_SENSORS_EMC1403)) += platform_emc1403.o obj-$(subst m,y,$(CONFIG_SENSORS_LIS3LV02D)) += platform_lis331.o -obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_max7315.o obj-$(subst m,y,$(CONFIG_INPUT_MPU3050)) += platform_mpu3050.o obj-$(subst m,y,$(CONFIG_INPUT_BMA150)) += platform_bma023.o -obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o obj-$(subst m,y,$(CONFIG_DRM_MEDFIELD)) += platform_tc35876x.o +# I2C GPIO Expanders +obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_max7315.o +obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_pcal9555a.o +obj-$(subst m,y,$(CONFIG_GPIO_PCA953X)) += platform_tca6416.o # MISC Devices obj-$(subst m,y,$(CONFIG_KEYBOARD_GPIO)) += platform_gpio_keys.o obj-$(subst m,y,$(CONFIG_INTEL_MID_WATCHDOG)) += platform_wdt.o diff --git a/arch/x86/platform/intel-mid/device_libs/platform_mrfld_pinctrl.c b/arch/x86/platform/intel-mid/device_libs/platform_mrfld_pinctrl.c new file mode 100644 index 0000000..4de8a66 --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_mrfld_pinctrl.c @@ -0,0 +1,43 @@ +/* + * Intel Merrifield FLIS platform device initialization file + * + * Copyright (C) 2016, Intel Corporation + * + * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> + +#include <asm/intel-mid.h> + +#define FLIS_BASE_ADDR 0xff0c0000 +#define FLIS_LENGTH 0x8000 + +static struct resource mrfld_pinctrl_mmio_resource = { + .start = FLIS_BASE_ADDR, + .end = FLIS_BASE_ADDR + FLIS_LENGTH - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device mrfld_pinctrl_device = { + .name = "pinctrl-merrifield", + .id = PLATFORM_DEVID_NONE, + .resource = &mrfld_pinctrl_mmio_resource, + .num_resources = 1, +}; + +static int __init mrfld_pinctrl_init(void) +{ + if (intel_mid_identify_cpu() == INTEL_MID_CPU_CHIP_TANGIER) + return platform_device_register(&mrfld_pinctrl_device); + + return -ENODEV; +} +arch_initcall(mrfld_pinctrl_init); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_pcal9555a.c b/arch/x86/platform/intel-mid/device_libs/platform_pcal9555a.c new file mode 100644 index 0000000..429a941 --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_pcal9555a.c @@ -0,0 +1,99 @@ +/* + * PCAL9555a platform data initilization file + * + * Copyright (C) 2016, Intel Corporation + * + * Authors: Andy Shevchenko <andriy.shevchenko@linux.intel.com> + * Dan O'Donovan <dan@emutex.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/i2c.h> +#include <linux/platform_data/pca953x.h> +#include <linux/sfi.h> + +#include <asm/intel-mid.h> + +#define PCAL9555A_NUM 4 + +static struct pca953x_platform_data pcal9555a_pdata[PCAL9555A_NUM]; +static int nr; + +static void __init *pcal9555a_platform_data(void *info) +{ + struct i2c_board_info *i2c_info = info; + char *type = i2c_info->type; + struct pca953x_platform_data *pcal9555a; + char base_pin_name[SFI_NAME_LEN + 1]; + char intr_pin_name[SFI_NAME_LEN + 1]; + int gpio_base, intr; + + snprintf(base_pin_name, sizeof(base_pin_name), "%s_base", type); + snprintf(intr_pin_name, sizeof(intr_pin_name), "%s_int", type); + + gpio_base = get_gpio_by_name(base_pin_name); + intr = get_gpio_by_name(intr_pin_name); + + /* Check if the SFI record valid */ + if (gpio_base == -1) + return NULL; + + if (nr >= PCAL9555A_NUM) { + pr_err("%s: Too many instances, only %d supported\n", __func__, + PCAL9555A_NUM); + return NULL; + } + + pcal9555a = &pcal9555a_pdata[nr++]; + pcal9555a->gpio_base = gpio_base; + + if (intr >= 0) { + i2c_info->irq = intr + INTEL_MID_IRQ_OFFSET; + pcal9555a->irq_base = gpio_base + INTEL_MID_IRQ_OFFSET; + } else { + i2c_info->irq = -1; + pcal9555a->irq_base = -1; + } + + strcpy(type, "pcal9555a"); + return pcal9555a; +} + +static const struct devs_id pcal9555a_1_dev_id __initconst = { + .name = "pcal9555a-1", + .type = SFI_DEV_TYPE_I2C, + .delay = 1, + .get_platform_data = &pcal9555a_platform_data, +}; + +static const struct devs_id pcal9555a_2_dev_id __initconst = { + .name = "pcal9555a-2", + .type = SFI_DEV_TYPE_I2C, + .delay = 1, + .get_platform_data = &pcal9555a_platform_data, +}; + +static const struct devs_id pcal9555a_3_dev_id __initconst = { + .name = "pcal9555a-3", + .type = SFI_DEV_TYPE_I2C, + .delay = 1, + .get_platform_data = &pcal9555a_platform_data, +}; + +static const struct devs_id pcal9555a_4_dev_id __initconst = { + .name = "pcal9555a-4", + .type = SFI_DEV_TYPE_I2C, + .delay = 1, + .get_platform_data = &pcal9555a_platform_data, +}; + +sfi_device(pcal9555a_1_dev_id); +sfi_device(pcal9555a_2_dev_id); +sfi_device(pcal9555a_3_dev_id); +sfi_device(pcal9555a_4_dev_id); diff --git a/arch/x86/platform/intel-mid/device_libs/platform_spidev.c b/arch/x86/platform/intel-mid/device_libs/platform_spidev.c new file mode 100644 index 0000000..30c601b --- /dev/null +++ b/arch/x86/platform/intel-mid/device_libs/platform_spidev.c @@ -0,0 +1,50 @@ +/* + * spidev platform data initilization file + * + * (C) Copyright 2014, 2016 Intel Corporation + * Authors: Andy Shevchenko <andriy.shevchenko@linux.intel.com> + * Dan O'Donovan <dan@emutex.com> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 + * of the License. + */ + +#include <linux/init.h> +#include <linux/sfi.h> +#include <linux/spi/pxa2xx_spi.h> +#include <linux/spi/spi.h> + +#include <asm/intel-mid.h> + +#define MRFLD_SPI_DEFAULT_DMA_BURST 8 +#define MRFLD_SPI_DEFAULT_TIMEOUT 500 + +/* GPIO pin for spidev chipselect */ +#define MRFLD_SPIDEV_GPIO_CS 111 + +static struct pxa2xx_spi_chip spidev_spi_chip = { + .dma_burst_size = MRFLD_SPI_DEFAULT_DMA_BURST, + .timeout = MRFLD_SPI_DEFAULT_TIMEOUT, + .gpio_cs = MRFLD_SPIDEV_GPIO_CS, +}; + +static void __init *spidev_platform_data(void *info) +{ + struct spi_board_info *spi_info = info; + + spi_info->mode = SPI_MODE_0; + spi_info->controller_data = &spidev_spi_chip; + + return NULL; +} + +static const struct devs_id spidev_dev_id __initconst = { + .name = "spidev", + .type = SFI_DEV_TYPE_SPI, + .delay = 0, + .get_platform_data = &spidev_platform_data, +}; + +sfi_device(spidev_dev_id); diff --git a/arch/x86/platform/intel-mid/intel-mid.c b/arch/x86/platform/intel-mid/intel-mid.c index 90bb997..abbf49c 100644 --- a/arch/x86/platform/intel-mid/intel-mid.c +++ b/arch/x86/platform/intel-mid/intel-mid.c @@ -16,6 +16,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/interrupt.h> +#include <linux/regulator/machine.h> #include <linux/scatterlist.h> #include <linux/sfi.h> #include <linux/irq.h> @@ -144,6 +145,15 @@ static void intel_mid_arch_setup(void) out: if (intel_mid_ops->arch_setup) intel_mid_ops->arch_setup(); + + /* + * Intel MID platforms are using explicitly defined regulators. + * + * Let the regulator core know that we do not have any additional + * regulators left. This lets it substitute unprovided regulators with + * dummy ones: + */ + regulator_has_full_constraints(); } /* MID systems don't have i8042 controller */ diff --git a/arch/x86/platform/intel-mid/mrfl.c b/arch/x86/platform/intel-mid/mrfld.c index bd1adc6..59253db 100644 --- a/arch/x86/platform/intel-mid/mrfl.c +++ b/arch/x86/platform/intel-mid/mrfld.c @@ -1,5 +1,5 @@ /* - * mrfl.c: Intel Merrifield platform specific setup code + * Intel Merrifield platform specific setup code * * (C) Copyright 2013 Intel Corporation * diff --git a/arch/x86/platform/intel-mid/pwr.c b/arch/x86/platform/intel-mid/pwr.c new file mode 100644 index 0000000..5bc90dd --- /dev/null +++ b/arch/x86/platform/intel-mid/pwr.c @@ -0,0 +1,418 @@ +/* + * Intel MID Power Management Unit (PWRMU) device driver + * + * Copyright (C) 2016, Intel Corporation + * + * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * Intel MID Power Management Unit device driver handles the South Complex PCI + * devices such as GPDMA, SPI, I2C, PWM, and so on. By default PCI core + * modifies bits in PMCSR register in the PCI configuration space. This is not + * enough on some SoCs like Intel Tangier. In such case PCI core sets a new + * power state of the device in question through a PM hook registered in struct + * pci_platform_pm_ops (see drivers/pci/pci-mid.c). + */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/pci.h> + +#include <asm/intel-mid.h> + +/* Registers */ +#define PM_STS 0x00 +#define PM_CMD 0x04 +#define PM_ICS 0x08 +#define PM_WKC(x) (0x10 + (x) * 4) +#define PM_WKS(x) (0x18 + (x) * 4) +#define PM_SSC(x) (0x20 + (x) * 4) +#define PM_SSS(x) (0x30 + (x) * 4) + +/* Bits in PM_STS */ +#define PM_STS_BUSY (1 << 8) + +/* Bits in PM_CMD */ +#define PM_CMD_CMD(x) ((x) << 0) +#define PM_CMD_IOC (1 << 8) +#define PM_CMD_D3cold (1 << 21) + +/* List of commands */ +#define CMD_SET_CFG 0x01 + +/* Bits in PM_ICS */ +#define PM_ICS_INT_STATUS(x) ((x) & 0xff) +#define PM_ICS_IE (1 << 8) +#define PM_ICS_IP (1 << 9) +#define PM_ICS_SW_INT_STS (1 << 10) + +/* List of interrupts */ +#define INT_INVALID 0 +#define INT_CMD_COMPLETE 1 +#define INT_CMD_ERR 2 +#define INT_WAKE_EVENT 3 +#define INT_LSS_POWER_ERR 4 +#define INT_S0iX_MSG_ERR 5 +#define INT_NO_C6 6 +#define INT_TRIGGER_ERR 7 +#define INT_INACTIVITY 8 + +/* South Complex devices */ +#define LSS_MAX_SHARED_DEVS 4 +#define LSS_MAX_DEVS 64 + +#define LSS_WS_BITS 1 /* wake state width */ +#define LSS_PWS_BITS 2 /* power state width */ + +/* Supported device IDs */ +#define PCI_DEVICE_ID_PENWELL 0x0828 +#define PCI_DEVICE_ID_TANGIER 0x11a1 + +struct mid_pwr_dev { + struct pci_dev *pdev; + pci_power_t state; +}; + +struct mid_pwr { + struct device *dev; + void __iomem *regs; + int irq; + bool available; + + struct mutex lock; + struct mid_pwr_dev lss[LSS_MAX_DEVS][LSS_MAX_SHARED_DEVS]; +}; + +static struct mid_pwr *midpwr; + +static u32 mid_pwr_get_state(struct mid_pwr *pwr, int reg) +{ + return readl(pwr->regs + PM_SSS(reg)); +} + +static void mid_pwr_set_state(struct mid_pwr *pwr, int reg, u32 value) +{ + writel(value, pwr->regs + PM_SSC(reg)); +} + +static void mid_pwr_set_wake(struct mid_pwr *pwr, int reg, u32 value) +{ + writel(value, pwr->regs + PM_WKC(reg)); +} + +static void mid_pwr_interrupt_disable(struct mid_pwr *pwr) +{ + writel(~PM_ICS_IE, pwr->regs + PM_ICS); +} + +static bool mid_pwr_is_busy(struct mid_pwr *pwr) +{ + return !!(readl(pwr->regs + PM_STS) & PM_STS_BUSY); +} + +/* Wait 500ms that the latest PWRMU command finished */ +static int mid_pwr_wait(struct mid_pwr *pwr) +{ + unsigned int count = 500000; + bool busy; + + do { + busy = mid_pwr_is_busy(pwr); + if (!busy) + return 0; + udelay(1); + } while (--count); + + return -EBUSY; +} + +static int mid_pwr_wait_for_cmd(struct mid_pwr *pwr, u8 cmd) +{ + writel(PM_CMD_CMD(cmd), pwr->regs + PM_CMD); + return mid_pwr_wait(pwr); +} + +static int __update_power_state(struct mid_pwr *pwr, int reg, int bit, int new) +{ + int curstate; + u32 power; + int ret; + + /* Check if the device is already in desired state */ + power = mid_pwr_get_state(pwr, reg); + curstate = (power >> bit) & 3; + if (curstate == new) + return 0; + + /* Update the power state */ + mid_pwr_set_state(pwr, reg, (power & ~(3 << bit)) | (new << bit)); + + /* Send command to SCU */ + ret = mid_pwr_wait_for_cmd(pwr, CMD_SET_CFG); + if (ret) + return ret; + + /* Check if the device is already in desired state */ + power = mid_pwr_get_state(pwr, reg); + curstate = (power >> bit) & 3; + if (curstate != new) + return -EAGAIN; + + return 0; +} + +static pci_power_t __find_weakest_power_state(struct mid_pwr_dev *lss, + struct pci_dev *pdev, + pci_power_t state) +{ + pci_power_t weakest = PCI_D3hot; + unsigned int j; + + /* Find device in cache or first free cell */ + for (j = 0; j < LSS_MAX_SHARED_DEVS; j++) { + if (lss[j].pdev == pdev || !lss[j].pdev) + break; + } + + /* Store the desired state in cache */ + if (j < LSS_MAX_SHARED_DEVS) { + lss[j].pdev = pdev; + lss[j].state = state; + } else { + dev_WARN(&pdev->dev, "No room for device in PWRMU LSS cache\n"); + weakest = state; + } + + /* Find the power state we may use */ + for (j = 0; j < LSS_MAX_SHARED_DEVS; j++) { + if (lss[j].state < weakest) + weakest = lss[j].state; + } + + return weakest; +} + +static int __set_power_state(struct mid_pwr *pwr, struct pci_dev *pdev, + pci_power_t state, int id, int reg, int bit) +{ + const char *name; + int ret; + + state = __find_weakest_power_state(pwr->lss[id], pdev, state); + name = pci_power_name(state); + + ret = __update_power_state(pwr, reg, bit, (__force int)state); + if (ret) { + dev_warn(&pdev->dev, "Can't set power state %s: %d\n", name, ret); + return ret; + } + + dev_vdbg(&pdev->dev, "Set power state %s\n", name); + return 0; +} + +static int mid_pwr_set_power_state(struct mid_pwr *pwr, struct pci_dev *pdev, + pci_power_t state) +{ + int id, reg, bit; + int ret; + + id = intel_mid_pwr_get_lss_id(pdev); + if (id < 0) + return id; + + reg = (id * LSS_PWS_BITS) / 32; + bit = (id * LSS_PWS_BITS) % 32; + + /* We support states between PCI_D0 and PCI_D3hot */ + if (state < PCI_D0) + state = PCI_D0; + if (state > PCI_D3hot) + state = PCI_D3hot; + + mutex_lock(&pwr->lock); + ret = __set_power_state(pwr, pdev, state, id, reg, bit); + mutex_unlock(&pwr->lock); + return ret; +} + +int intel_mid_pci_set_power_state(struct pci_dev *pdev, pci_power_t state) +{ + struct mid_pwr *pwr = midpwr; + int ret = 0; + + might_sleep(); + + if (pwr && pwr->available) + ret = mid_pwr_set_power_state(pwr, pdev, state); + dev_vdbg(&pdev->dev, "set_power_state() returns %d\n", ret); + + return 0; +} +EXPORT_SYMBOL_GPL(intel_mid_pci_set_power_state); + +int intel_mid_pwr_get_lss_id(struct pci_dev *pdev) +{ + int vndr; + u8 id; + + /* + * Mapping to PWRMU index is kept in the Logical SubSystem ID byte of + * Vendor capability. + */ + vndr = pci_find_capability(pdev, PCI_CAP_ID_VNDR); + if (!vndr) + return -EINVAL; + + /* Read the Logical SubSystem ID byte */ + pci_read_config_byte(pdev, vndr + INTEL_MID_PWR_LSS_OFFSET, &id); + if (!(id & INTEL_MID_PWR_LSS_TYPE)) + return -ENODEV; + + id &= ~INTEL_MID_PWR_LSS_TYPE; + if (id >= LSS_MAX_DEVS) + return -ERANGE; + + return id; +} + +static irqreturn_t mid_pwr_irq_handler(int irq, void *dev_id) +{ + struct mid_pwr *pwr = dev_id; + u32 ics; + + ics = readl(pwr->regs + PM_ICS); + if (!(ics & PM_ICS_IP)) + return IRQ_NONE; + + writel(ics | PM_ICS_IP, pwr->regs + PM_ICS); + + dev_warn(pwr->dev, "Unexpected IRQ: %#x\n", PM_ICS_INT_STATUS(ics)); + return IRQ_HANDLED; +} + +struct mid_pwr_device_info { + int (*set_initial_state)(struct mid_pwr *pwr); +}; + +static int mid_pwr_probe(struct pci_dev *pdev, const struct pci_device_id *id) +{ + struct mid_pwr_device_info *info = (void *)id->driver_data; + struct device *dev = &pdev->dev; + struct mid_pwr *pwr; + int ret; + + ret = pcim_enable_device(pdev); + if (ret < 0) { + dev_err(&pdev->dev, "error: could not enable device\n"); + return ret; + } + + ret = pcim_iomap_regions(pdev, 1 << 0, pci_name(pdev)); + if (ret) { + dev_err(&pdev->dev, "I/O memory remapping failed\n"); + return ret; + } + + pwr = devm_kzalloc(dev, sizeof(*pwr), GFP_KERNEL); + if (!pwr) + return -ENOMEM; + + pwr->dev = dev; + pwr->regs = pcim_iomap_table(pdev)[0]; + pwr->irq = pdev->irq; + + mutex_init(&pwr->lock); + + /* Disable interrupts */ + mid_pwr_interrupt_disable(pwr); + + if (info && info->set_initial_state) { + ret = info->set_initial_state(pwr); + if (ret) + dev_warn(dev, "Can't set initial state: %d\n", ret); + } + + ret = devm_request_irq(dev, pdev->irq, mid_pwr_irq_handler, + IRQF_NO_SUSPEND, pci_name(pdev), pwr); + if (ret) + return ret; + + pwr->available = true; + midpwr = pwr; + + pci_set_drvdata(pdev, pwr); + return 0; +} + +static int mid_set_initial_state(struct mid_pwr *pwr) +{ + unsigned int i, j; + int ret; + + /* + * Enable wake events. + * + * PWRMU supports up to 32 sources for wake up the system. Ungate them + * all here. + */ + mid_pwr_set_wake(pwr, 0, 0xffffffff); + mid_pwr_set_wake(pwr, 1, 0xffffffff); + + /* + * Power off South Complex devices. + * + * There is a map (see a note below) of 64 devices with 2 bits per each + * on 32-bit HW registers. The following calls set all devices to one + * known initial state, i.e. PCI_D3hot. This is done in conjunction + * with PMCSR setting in arch/x86/pci/intel_mid_pci.c. + * + * NOTE: The actual device mapping is provided by a platform at run + * time using vendor capability of PCI configuration space. + */ + mid_pwr_set_state(pwr, 0, 0xffffffff); + mid_pwr_set_state(pwr, 1, 0xffffffff); + mid_pwr_set_state(pwr, 2, 0xffffffff); + mid_pwr_set_state(pwr, 3, 0xffffffff); + + /* Send command to SCU */ + ret = mid_pwr_wait_for_cmd(pwr, CMD_SET_CFG); + if (ret) + return ret; + + for (i = 0; i < LSS_MAX_DEVS; i++) { + for (j = 0; j < LSS_MAX_SHARED_DEVS; j++) + pwr->lss[i][j].state = PCI_D3hot; + } + + return 0; +} + +static const struct mid_pwr_device_info mid_info = { + .set_initial_state = mid_set_initial_state, +}; + +static const struct pci_device_id mid_pwr_pci_ids[] = { + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_PENWELL), (kernel_ulong_t)&mid_info }, + { PCI_VDEVICE(INTEL, PCI_DEVICE_ID_TANGIER), (kernel_ulong_t)&mid_info }, + {} +}; +MODULE_DEVICE_TABLE(pci, mid_pwr_pci_ids); + +static struct pci_driver mid_pwr_pci_driver = { + .name = "intel_mid_pwr", + .probe = mid_pwr_probe, + .id_table = mid_pwr_pci_ids, +}; + +builtin_pci_driver(mid_pwr_pci_driver); diff --git a/arch/x86/platform/intel-mid/sfi.c b/arch/x86/platform/intel-mid/sfi.c index 5ee360a..1555672 100644 --- a/arch/x86/platform/intel-mid/sfi.c +++ b/arch/x86/platform/intel-mid/sfi.c @@ -407,6 +407,32 @@ static void __init sfi_handle_i2c_dev(struct sfi_device_table_entry *pentry, i2c_register_board_info(pentry->host_num, &i2c_info, 1); } +static void __init sfi_handle_sd_dev(struct sfi_device_table_entry *pentry, + struct devs_id *dev) +{ + struct mid_sd_board_info sd_info; + void *pdata; + + memset(&sd_info, 0, sizeof(sd_info)); + strncpy(sd_info.name, pentry->name, SFI_NAME_LEN); + sd_info.bus_num = pentry->host_num; + sd_info.max_clk = pentry->max_freq; + sd_info.addr = pentry->addr; + pr_debug("SD bus = %d, name = %16.16s, max_clk = %d, addr = 0x%x\n", + sd_info.bus_num, + sd_info.name, + sd_info.max_clk, + sd_info.addr); + pdata = intel_mid_sfi_get_pdata(dev, &sd_info); + if (IS_ERR(pdata)) + return; + + /* Nothing we can do with this for now */ + sd_info.platform_data = pdata; + + pr_debug("Successfully registered %16.16s", sd_info.name); +} + extern struct devs_id *const __x86_intel_mid_dev_start[], *const __x86_intel_mid_dev_end[]; @@ -490,6 +516,9 @@ static int __init sfi_parse_devs(struct sfi_table_header *table) case SFI_DEV_TYPE_I2C: sfi_handle_i2c_dev(pentry, dev); break; + case SFI_DEV_TYPE_SD: + sfi_handle_sd_dev(pentry, dev); + break; case SFI_DEV_TYPE_UART: case SFI_DEV_TYPE_HSI: default: diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index 0872d5f..357a0b8 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -29,6 +29,7 @@ ACPI_MODULE_NAME("acpi_lpss"); #ifdef CONFIG_X86_INTEL_LPSS #include <asm/cpu_device_id.h> +#include <asm/intel-family.h> #include <asm/iosf_mbi.h> #include <asm/pmc_atom.h> @@ -229,8 +230,8 @@ static const struct lpss_device_desc bsw_spi_dev_desc = { #define ICPU(model) { X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, } static const struct x86_cpu_id lpss_cpu_ids[] = { - ICPU(0x37), /* Valleyview, Bay Trail */ - ICPU(0x4c), /* Braswell, Cherry Trail */ + ICPU(INTEL_FAM6_ATOM_SILVERMONT1), /* Valleyview, Bay Trail */ + ICPU(INTEL_FAM6_ATOM_AIRMONT), /* Braswell, Cherry Trail */ {} }; diff --git a/drivers/cpufreq/intel_pstate.c b/drivers/cpufreq/intel_pstate.c index 1fa1a32..28690b2 100644 --- a/drivers/cpufreq/intel_pstate.c +++ b/drivers/cpufreq/intel_pstate.c @@ -35,6 +35,7 @@ #include <asm/msr.h> #include <asm/cpu_device_id.h> #include <asm/cpufeature.h> +#include <asm/intel-family.h> #define ATOM_RATIOS 0x66a #define ATOM_VIDS 0x66b @@ -1334,29 +1335,29 @@ static void intel_pstate_update_util(struct update_util_data *data, u64 time, (unsigned long)&policy } static const struct x86_cpu_id intel_pstate_cpu_ids[] = { - ICPU(0x2a, core_params), - ICPU(0x2d, core_params), - ICPU(0x37, silvermont_params), - ICPU(0x3a, core_params), - ICPU(0x3c, core_params), - ICPU(0x3d, core_params), - ICPU(0x3e, core_params), - ICPU(0x3f, core_params), - ICPU(0x45, core_params), - ICPU(0x46, core_params), - ICPU(0x47, core_params), - ICPU(0x4c, airmont_params), - ICPU(0x4e, core_params), - ICPU(0x4f, core_params), - ICPU(0x5e, core_params), - ICPU(0x56, core_params), - ICPU(0x57, knl_params), + ICPU(INTEL_FAM6_SANDYBRIDGE, core_params), + ICPU(INTEL_FAM6_SANDYBRIDGE_X, core_params), + ICPU(INTEL_FAM6_ATOM_SILVERMONT1, silvermont_params), + ICPU(INTEL_FAM6_IVYBRIDGE, core_params), + ICPU(INTEL_FAM6_HASWELL_CORE, core_params), + ICPU(INTEL_FAM6_BROADWELL_CORE, core_params), + ICPU(INTEL_FAM6_IVYBRIDGE_X, core_params), + ICPU(INTEL_FAM6_HASWELL_X, core_params), + ICPU(INTEL_FAM6_HASWELL_ULT, core_params), + ICPU(INTEL_FAM6_HASWELL_GT3E, core_params), + ICPU(INTEL_FAM6_BROADWELL_GT3E, core_params), + ICPU(INTEL_FAM6_ATOM_AIRMONT, airmont_params), + ICPU(INTEL_FAM6_SKYLAKE_MOBILE, core_params), + ICPU(INTEL_FAM6_BROADWELL_X, core_params), + ICPU(INTEL_FAM6_SKYLAKE_DESKTOP, core_params), + ICPU(INTEL_FAM6_BROADWELL_XEON_D, core_params), + ICPU(INTEL_FAM6_XEON_PHI_KNL, knl_params), {} }; MODULE_DEVICE_TABLE(x86cpu, intel_pstate_cpu_ids); static const struct x86_cpu_id intel_pstate_cpu_oob_ids[] = { - ICPU(0x56, core_params), + ICPU(INTEL_FAM6_BROADWELL_XEON_D, core_params), {} }; diff --git a/drivers/idle/intel_idle.c b/drivers/idle/intel_idle.c index c966492..b5dd41d 100644 --- a/drivers/idle/intel_idle.c +++ b/drivers/idle/intel_idle.c @@ -62,6 +62,7 @@ #include <linux/cpu.h> #include <linux/module.h> #include <asm/cpu_device_id.h> +#include <asm/intel-family.h> #include <asm/mwait.h> #include <asm/msr.h> @@ -1020,38 +1021,38 @@ static const struct idle_cpu idle_cpu_bxt = { { X86_VENDOR_INTEL, 6, model, X86_FEATURE_MWAIT, (unsigned long)&cpu } static const struct x86_cpu_id intel_idle_ids[] __initconst = { - ICPU(0x1a, idle_cpu_nehalem), - ICPU(0x1e, idle_cpu_nehalem), - ICPU(0x1f, idle_cpu_nehalem), - ICPU(0x25, idle_cpu_nehalem), - ICPU(0x2c, idle_cpu_nehalem), - ICPU(0x2e, idle_cpu_nehalem), - ICPU(0x1c, idle_cpu_atom), - ICPU(0x26, idle_cpu_lincroft), - ICPU(0x2f, idle_cpu_nehalem), - ICPU(0x2a, idle_cpu_snb), - ICPU(0x2d, idle_cpu_snb), - ICPU(0x36, idle_cpu_atom), - ICPU(0x37, idle_cpu_byt), - ICPU(0x4c, idle_cpu_cht), - ICPU(0x3a, idle_cpu_ivb), - ICPU(0x3e, idle_cpu_ivt), - ICPU(0x3c, idle_cpu_hsw), - ICPU(0x3f, idle_cpu_hsw), - ICPU(0x45, idle_cpu_hsw), - ICPU(0x46, idle_cpu_hsw), - ICPU(0x4d, idle_cpu_avn), - ICPU(0x3d, idle_cpu_bdw), - ICPU(0x47, idle_cpu_bdw), - ICPU(0x4f, idle_cpu_bdw), - ICPU(0x56, idle_cpu_bdw), - ICPU(0x4e, idle_cpu_skl), - ICPU(0x5e, idle_cpu_skl), - ICPU(0x8e, idle_cpu_skl), - ICPU(0x9e, idle_cpu_skl), - ICPU(0x55, idle_cpu_skx), - ICPU(0x57, idle_cpu_knl), - ICPU(0x5c, idle_cpu_bxt), + ICPU(INTEL_FAM6_NEHALEM_EP, idle_cpu_nehalem), + ICPU(INTEL_FAM6_NEHALEM, idle_cpu_nehalem), + ICPU(INTEL_FAM6_WESTMERE2, idle_cpu_nehalem), + ICPU(INTEL_FAM6_WESTMERE, idle_cpu_nehalem), + ICPU(INTEL_FAM6_WESTMERE_EP, idle_cpu_nehalem), + ICPU(INTEL_FAM6_NEHALEM_EX, idle_cpu_nehalem), + ICPU(INTEL_FAM6_ATOM_PINEVIEW, idle_cpu_atom), + ICPU(INTEL_FAM6_ATOM_LINCROFT, idle_cpu_lincroft), + ICPU(INTEL_FAM6_WESTMERE_EX, idle_cpu_nehalem), + ICPU(INTEL_FAM6_SANDYBRIDGE, idle_cpu_snb), + ICPU(INTEL_FAM6_SANDYBRIDGE_X, idle_cpu_snb), + ICPU(INTEL_FAM6_ATOM_CEDARVIEW, idle_cpu_atom), + ICPU(INTEL_FAM6_ATOM_SILVERMONT1, idle_cpu_byt), + ICPU(INTEL_FAM6_ATOM_AIRMONT, idle_cpu_cht), + ICPU(INTEL_FAM6_IVYBRIDGE, idle_cpu_ivb), + ICPU(INTEL_FAM6_IVYBRIDGE_X, idle_cpu_ivt), + ICPU(INTEL_FAM6_HASWELL_CORE, idle_cpu_hsw), + ICPU(INTEL_FAM6_HASWELL_X, idle_cpu_hsw), + ICPU(INTEL_FAM6_HASWELL_ULT, idle_cpu_hsw), + ICPU(INTEL_FAM6_HASWELL_GT3E, idle_cpu_hsw), + ICPU(INTEL_FAM6_ATOM_SILVERMONT2, idle_cpu_avn), + ICPU(INTEL_FAM6_BROADWELL_CORE, idle_cpu_bdw), + ICPU(INTEL_FAM6_BROADWELL_GT3E, idle_cpu_bdw), + ICPU(INTEL_FAM6_BROADWELL_X, idle_cpu_bdw), + ICPU(INTEL_FAM6_BROADWELL_XEON_D, idle_cpu_bdw), + ICPU(INTEL_FAM6_SKYLAKE_MOBILE, idle_cpu_skl), + ICPU(INTEL_FAM6_SKYLAKE_DESKTOP, idle_cpu_skl), + ICPU(INTEL_FAM6_KABYLAKE_MOBILE, idle_cpu_skl), + ICPU(INTEL_FAM6_KABYLAKE_DESKTOP, idle_cpu_skl), + ICPU(INTEL_FAM6_SKYLAKE_X, idle_cpu_skx), + ICPU(INTEL_FAM6_XEON_PHI_KNL, idle_cpu_knl), + ICPU(INTEL_FAM6_ATOM_GOLDMONT, idle_cpu_bxt), {} }; MODULE_DEVICE_TABLE(x86cpu, intel_idle_ids); @@ -1261,13 +1262,13 @@ static void intel_idle_state_table_update(void) { switch (boot_cpu_data.x86_model) { - case 0x3e: /* IVT */ + case INTEL_FAM6_IVYBRIDGE_X: ivt_idle_state_table_update(); break; - case 0x5c: /* BXT */ + case INTEL_FAM6_ATOM_GOLDMONT: bxt_idle_state_table_update(); break; - case 0x5e: /* SKL-H */ + case INTEL_FAM6_SKYLAKE_DESKTOP: sklh_idle_state_table_update(); break; } diff --git a/drivers/mmc/host/sdhci-acpi.c b/drivers/mmc/host/sdhci-acpi.c index 458ffb7..008709c 100644 --- a/drivers/mmc/host/sdhci-acpi.c +++ b/drivers/mmc/host/sdhci-acpi.c @@ -43,6 +43,7 @@ #ifdef CONFIG_X86 #include <asm/cpu_device_id.h> +#include <asm/intel-family.h> #include <asm/iosf_mbi.h> #endif @@ -126,7 +127,7 @@ static const struct sdhci_acpi_chip sdhci_acpi_chip_int = { static bool sdhci_acpi_byt(void) { static const struct x86_cpu_id byt[] = { - { X86_VENDOR_INTEL, 6, 0x37 }, + { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_SILVERMONT1 }, {} }; diff --git a/drivers/pci/Makefile b/drivers/pci/Makefile index 1fa6925..8db5079 100644 --- a/drivers/pci/Makefile +++ b/drivers/pci/Makefile @@ -51,6 +51,9 @@ obj-$(CONFIG_ACPI) += pci-acpi.o # SMBIOS provided firmware instance and labels obj-$(CONFIG_PCI_LABEL) += pci-label.o +# Intel MID platform PM support +obj-$(CONFIG_X86_INTEL_MID) += pci-mid.o + obj-$(CONFIG_PCI_SYSCALL) += syscall.o obj-$(CONFIG_PCI_STUB) += pci-stub.o diff --git a/drivers/pci/pci-mid.c b/drivers/pci/pci-mid.c new file mode 100644 index 0000000..c878aa7 --- /dev/null +++ b/drivers/pci/pci-mid.c @@ -0,0 +1,77 @@ +/* + * Intel MID platform PM support + * + * Copyright (C) 2016, Intel Corporation + * + * Author: Andy Shevchenko <andriy.shevchenko@linux.intel.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/pci.h> + +#include <asm/cpu_device_id.h> +#include <asm/intel-family.h> +#include <asm/intel-mid.h> + +#include "pci.h" + +static bool mid_pci_power_manageable(struct pci_dev *dev) +{ + return true; +} + +static int mid_pci_set_power_state(struct pci_dev *pdev, pci_power_t state) +{ + return intel_mid_pci_set_power_state(pdev, state); +} + +static pci_power_t mid_pci_choose_state(struct pci_dev *pdev) +{ + return PCI_D3hot; +} + +static int mid_pci_sleep_wake(struct pci_dev *dev, bool enable) +{ + return 0; +} + +static int mid_pci_run_wake(struct pci_dev *dev, bool enable) +{ + return 0; +} + +static bool mid_pci_need_resume(struct pci_dev *dev) +{ + return false; +} + +static struct pci_platform_pm_ops mid_pci_platform_pm = { + .is_manageable = mid_pci_power_manageable, + .set_state = mid_pci_set_power_state, + .choose_state = mid_pci_choose_state, + .sleep_wake = mid_pci_sleep_wake, + .run_wake = mid_pci_run_wake, + .need_resume = mid_pci_need_resume, +}; + +#define ICPU(model) { X86_VENDOR_INTEL, 6, model, X86_FEATURE_ANY, } + +static const struct x86_cpu_id lpss_cpu_ids[] = { + ICPU(INTEL_FAM6_ATOM_MERRIFIELD1), + {} +}; + +static int __init mid_pci_init(void) +{ + const struct x86_cpu_id *id; + + id = x86_match_cpu(lpss_cpu_ids); + if (id) + pci_set_platform_pm(&mid_pci_platform_pm); + return 0; +} +arch_initcall(mid_pci_init); diff --git a/drivers/platform/x86/intel_telemetry_debugfs.c b/drivers/platform/x86/intel_telemetry_debugfs.c index f5134ac..815a7c5 100644 --- a/drivers/platform/x86/intel_telemetry_debugfs.c +++ b/drivers/platform/x86/intel_telemetry_debugfs.c @@ -32,6 +32,7 @@ #include <linux/suspend.h> #include <asm/cpu_device_id.h> +#include <asm/intel-family.h> #include <asm/intel_pmc_ipc.h> #include <asm/intel_punit_ipc.h> #include <asm/intel_telemetry.h> @@ -331,7 +332,7 @@ static struct telemetry_debugfs_conf telem_apl_debugfs_conf = { }; static const struct x86_cpu_id telemetry_debugfs_cpu_ids[] = { - TELEM_DEBUGFS_CPU(0x5c, telem_apl_debugfs_conf), + TELEM_DEBUGFS_CPU(INTEL_FAM6_ATOM_GOLDMONT, telem_apl_debugfs_conf), {} }; diff --git a/drivers/platform/x86/intel_telemetry_pltdrv.c b/drivers/platform/x86/intel_telemetry_pltdrv.c index 09c84a2..6d884f7 100644 --- a/drivers/platform/x86/intel_telemetry_pltdrv.c +++ b/drivers/platform/x86/intel_telemetry_pltdrv.c @@ -28,6 +28,7 @@ #include <linux/platform_device.h> #include <asm/cpu_device_id.h> +#include <asm/intel-family.h> #include <asm/intel_pmc_ipc.h> #include <asm/intel_punit_ipc.h> #include <asm/intel_telemetry.h> @@ -163,7 +164,7 @@ static struct telemetry_plt_config telem_apl_config = { }; static const struct x86_cpu_id telemetry_cpu_ids[] = { - TELEM_CPU(0x5c, telem_apl_config), + TELEM_CPU(INTEL_FAM6_ATOM_GOLDMONT, telem_apl_config), {} }; diff --git a/drivers/powercap/intel_rapl.c b/drivers/powercap/intel_rapl.c index b2766b8..2e8f2be 100644 --- a/drivers/powercap/intel_rapl.c +++ b/drivers/powercap/intel_rapl.c @@ -33,6 +33,7 @@ #include <asm/processor.h> #include <asm/cpu_device_id.h> +#include <asm/intel-family.h> /* Local defines */ #define MSR_PLATFORM_POWER_LIMIT 0x0000065C @@ -1096,27 +1097,34 @@ static const struct rapl_defaults rapl_defaults_cht = { } static const struct x86_cpu_id rapl_ids[] __initconst = { - RAPL_CPU(0x2a, rapl_defaults_core),/* Sandy Bridge */ - RAPL_CPU(0x2d, rapl_defaults_core),/* Sandy Bridge EP */ - RAPL_CPU(0x37, rapl_defaults_byt),/* Valleyview */ - RAPL_CPU(0x3a, rapl_defaults_core),/* Ivy Bridge */ - RAPL_CPU(0x3c, rapl_defaults_core),/* Haswell */ - RAPL_CPU(0x3d, rapl_defaults_core),/* Broadwell */ - RAPL_CPU(0x3f, rapl_defaults_hsw_server),/* Haswell servers */ - RAPL_CPU(0x4f, rapl_defaults_hsw_server),/* Broadwell servers */ - RAPL_CPU(0x45, rapl_defaults_core),/* Haswell ULT */ - RAPL_CPU(0x46, rapl_defaults_core),/* Haswell */ - RAPL_CPU(0x47, rapl_defaults_core),/* Broadwell-H */ - RAPL_CPU(0x4E, rapl_defaults_core),/* Skylake */ - RAPL_CPU(0x4C, rapl_defaults_cht),/* Braswell/Cherryview */ - RAPL_CPU(0x4A, rapl_defaults_tng),/* Tangier */ - RAPL_CPU(0x56, rapl_defaults_core),/* Future Xeon */ - RAPL_CPU(0x5A, rapl_defaults_ann),/* Annidale */ - RAPL_CPU(0X5C, rapl_defaults_core),/* Broxton */ - RAPL_CPU(0x5E, rapl_defaults_core),/* Skylake-H/S */ - RAPL_CPU(0x57, rapl_defaults_hsw_server),/* Knights Landing */ - RAPL_CPU(0x8E, rapl_defaults_core),/* Kabylake */ - RAPL_CPU(0x9E, rapl_defaults_core),/* Kabylake */ + RAPL_CPU(INTEL_FAM6_SANDYBRIDGE, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_SANDYBRIDGE_X, rapl_defaults_core), + + RAPL_CPU(INTEL_FAM6_IVYBRIDGE, rapl_defaults_core), + + RAPL_CPU(INTEL_FAM6_HASWELL_CORE, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_HASWELL_ULT, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_HASWELL_GT3E, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_HASWELL_X, rapl_defaults_hsw_server), + + RAPL_CPU(INTEL_FAM6_BROADWELL_CORE, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_BROADWELL_GT3E, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_BROADWELL_XEON_D, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_BROADWELL_X, rapl_defaults_hsw_server), + + RAPL_CPU(INTEL_FAM6_SKYLAKE_DESKTOP, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_SKYLAKE_MOBILE, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_SKYLAKE_X, rapl_defaults_hsw_server), + RAPL_CPU(INTEL_FAM6_KABYLAKE_MOBILE, rapl_defaults_core), + RAPL_CPU(INTEL_FAM6_KABYLAKE_DESKTOP, rapl_defaults_core), + + RAPL_CPU(INTEL_FAM6_ATOM_SILVERMONT1, rapl_defaults_byt), + RAPL_CPU(INTEL_FAM6_ATOM_AIRMONT, rapl_defaults_cht), + RAPL_CPU(INTEL_FAM6_ATOM_MERRIFIELD1, rapl_defaults_tng), + RAPL_CPU(INTEL_FAM6_ATOM_MERRIFIELD2, rapl_defaults_ann), + RAPL_CPU(INTEL_FAM6_ATOM_GOLDMONT, rapl_defaults_core), + + RAPL_CPU(INTEL_FAM6_XEON_PHI_KNL, rapl_defaults_hsw_server), {} }; MODULE_DEVICE_TABLE(x86cpu, rapl_ids); diff --git a/drivers/thermal/intel_soc_dts_thermal.c b/drivers/thermal/intel_soc_dts_thermal.c index 4ebb31a3..b2bbaa1 100644 --- a/drivers/thermal/intel_soc_dts_thermal.c +++ b/drivers/thermal/intel_soc_dts_thermal.c @@ -18,6 +18,7 @@ #include <linux/module.h> #include <linux/interrupt.h> #include <asm/cpu_device_id.h> +#include <asm/intel-family.h> #include "intel_soc_dts_iosf.h" #define CRITICAL_OFFSET_FROM_TJ_MAX 5000 @@ -42,7 +43,8 @@ static irqreturn_t soc_irq_thread_fn(int irq, void *dev_data) } static const struct x86_cpu_id soc_thermal_ids[] = { - { X86_VENDOR_INTEL, X86_FAMILY_ANY, 0x37, 0, BYT_SOC_DTS_APIC_IRQ}, + { X86_VENDOR_INTEL, 6, INTEL_FAM6_ATOM_SILVERMONT1, 0, + BYT_SOC_DTS_APIC_IRQ}, {} }; MODULE_DEVICE_TABLE(x86cpu, soc_thermal_ids); diff --git a/include/linux/sfi.h b/include/linux/sfi.h index d9b436f..e0e1597 100644 --- a/include/linux/sfi.h +++ b/include/linux/sfi.h @@ -156,6 +156,7 @@ struct sfi_device_table_entry { #define SFI_DEV_TYPE_UART 2 #define SFI_DEV_TYPE_HSI 3 #define SFI_DEV_TYPE_IPC 4 +#define SFI_DEV_TYPE_SD 5 u8 host_num; /* attached to host 0, 1...*/ u16 addr; |