diff options
author | Arnd Bergmann <arnd@arndb.de> | 2016-09-14 22:44:55 (GMT) |
---|---|---|
committer | Arnd Bergmann <arnd@arndb.de> | 2016-09-14 22:44:55 (GMT) |
commit | aaf1edc2bab1dba2a57695a3122ddb28f6cbaa59 (patch) | |
tree | b577bbd93f4d853b3d36c59490260b2d96903720 | |
parent | 327c2c1562c9bfe001e4e773c05d9cd731a4883e (diff) | |
parent | 7260ecd22baa3c62ef6efaf59e7de53f4c8df800 (diff) | |
download | linux-aaf1edc2bab1dba2a57695a3122ddb28f6cbaa59.tar.xz |
Merge tag 'arm-soc/for-4.9/devicetree' of http://github.com/Broadcom/stblinux into next/dt
Pull "Broadcom devicetree changes for 4.9" from Florian Fainelli:
This pull request contains Broadcom ARM-based Device Tree changes for v4.9,
please pull the following:
- Jon adds support for the Ethernet MAC DT nodes (AMAC) and provides the
following updates for Broadcom references boards:
* New Northstar Plus reference boards added: BCM958525er, BCM958522er,
BCM988312hr, BCM958623hr and BCM958622hr
* Add SATA nodes to the BCM958625hr and XMC boards
* Add I2C nodes to the XMC board
* Fixes the amount of RAM on BCM958625HR, BCM958625K and BCM958525XMC boards
* Add the GPIO reboot method for BCM958625hr and XMC boards
- Dhanajay adds PWM nodes for the Northstar Plus SoCs
- Rafal adds the USB 2.0 PHY to the BCM5301x Device Tree file include
- Stefan adds a missing USB clock to the BCM283x DT files, adds a DTSI file for
the USB host mode on BCM283x and finally documents and adds support for the
Raspberry Pi Zero
- Florian adds support for the Northstar Plus Switch Register Access block which
enables the integrated switch on these SoCs and enables the switch ports on the
BCM958625HR reference board
* tag 'arm-soc/for-4.9/devicetree' of http://github.com/Broadcom/stblinux: (22 commits)
ARM: dts: bcm2835: Add Raspberry Pi Zero
DT: bindings: bcm: Add Raspberry Pi Zero
ARM: dts: bcm283x: Add dtsi for USB host mode
ARM: dts: bcm283x: Add missing USB clock
ARM: dts: NSP: Add new DT file for bcm958622hr
ARM: dts: NSP: Add new DT file for bcm958623hr
ARM: dts: NSP: Add new DT file for bcm988312hr
ARM: dts: NSP: Add new DT file for bcm958522er
ARM: dts: NSP: Add new DT file for bcm958525er
ARM: dts: NSP: Add GPIO reboot method to bcm958625xmc DTS file
ARM: dts: NSP: Add GPIO reboot method to bcm958625hr DTS file
ARM: dts: NSP: Specify RAM amount for BCM958525XMC board
ARM: dts: NSP: Specify RAM amount for BCM958625K board
ARM: dts: NSP: Enable SATA and add i2c devices on XMC
ARM: dts: NSP: Enable SATA on bcm958625hr
ARM: dts: NSP: Correct RAM amount for BCM958625HR board
ARM: dts: NSP: Add PWM Support to DT
ARM: BCM5301X: Specify PHY of USB 2.0 in DT
ARM: dts: NSP: Add BCM958625HR switch ports
ARM: dts: NSP: Add Switch Register Access Block node
...
23 files changed, 1093 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt index 6ffe087..9c97de2 100644 --- a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt +++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm2835.txt @@ -38,6 +38,10 @@ Raspberry Pi Compute Module Required root node properties: compatible = "raspberrypi,compute-module", "brcm,bcm2835"; +Raspberry Pi Zero +Required root node properties: +compatible = "raspberrypi,model-zero", "brcm,bcm2835"; + Generic BCM2835 board Required root node properties: compatible = "brcm,bcm2835"; diff --git a/Documentation/devicetree/bindings/net/brcm,amac.txt b/Documentation/devicetree/bindings/net/brcm,amac.txt new file mode 100644 index 0000000..ba5ecc1 --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,amac.txt @@ -0,0 +1,24 @@ +Broadcom AMAC Ethernet Controller Device Tree Bindings +------------------------------------------------------------- + +Required properties: + - compatible: "brcm,amac" or "brcm,nsp-amac" + - reg: Address and length of the GMAC registers, + Address and length of the GMAC IDM registers + - reg-names: Names of the registers. Must have both "amac_base" and + "idm_base" + - interrupts: Interrupt number + +Optional properties: +- mac-address: See ethernet.txt file in the same directory + +Examples: + +amac0: ethernet@18022000 { + compatible = "brcm,nsp-amac"; + reg = <0x18022000 0x1000>, + <0x18110000 0x1000>; + reg-names = "amac_base", "idm_base"; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt b/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt new file mode 100644 index 0000000..022946c --- /dev/null +++ b/Documentation/devicetree/bindings/net/brcm,bgmac-nsp.txt @@ -0,0 +1,24 @@ +Broadcom GMAC Ethernet Controller Device Tree Bindings +------------------------------------------------------------- + +Required properties: + - compatible: "brcm,bgmac-nsp" + - reg: Address and length of the GMAC registers, + Address and length of the GMAC IDM registers + - reg-names: Names of the registers. Must have both "gmac_base" and + "idm_base" + - interrupts: Interrupt number + +Optional properties: +- mac-address: See ethernet.txt file in the same directory + +Examples: + +gmac0: ethernet@18022000 { + compatible = "brcm,bgmac-nsp"; + reg = <0x18022000 0x1000>, + <0x18110000 0x1000>; + reg-names = "gmac_base", "idm_base"; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index ba1ec6c..b8d789d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -69,7 +69,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ bcm2835-rpi-b-rev2.dtb \ bcm2835-rpi-b-plus.dtb \ bcm2835-rpi-a-plus.dtb \ - bcm2836-rpi-2-b.dtb + bcm2836-rpi-2-b.dtb \ + bcm2835-rpi-zero.dtb dtb-$(CONFIG_ARCH_BCM_5301X) += \ bcm4708-asus-rt-ac56u.dtb \ bcm4708-asus-rt-ac68u.dtb \ @@ -102,8 +103,13 @@ dtb-$(CONFIG_ARCH_BCM_MOBILE) += \ bcm21664-garnet.dtb \ bcm23550-sparrow.dtb dtb-$(CONFIG_ARCH_BCM_NSP) += \ + bcm958522er.dtb \ + bcm958525er.dtb \ bcm958525xmc.dtb \ + bcm958622hr.dtb \ + bcm958623hr.dtb \ bcm958625hr.dtb \ + bcm988312hr.dtb \ bcm958625k.dtb dtb-$(CONFIG_ARCH_BERLIN) += \ berlin2-sony-nsz-gs7.dtb \ diff --git a/arch/arm/boot/dts/bcm-nsp.dtsi b/arch/arm/boot/dts/bcm-nsp.dtsi index c3bf7d2..7c9e0fa 100644 --- a/arch/arm/boot/dts/bcm-nsp.dtsi +++ b/arch/arm/boot/dts/bcm-nsp.dtsi @@ -209,6 +209,24 @@ #dma-cells = <1>; }; + amac0: ethernet@22000 { + compatible = "brcm,nsp-amac"; + reg = <0x022000 0x1000>, + <0x110000 0x1000>; + reg-names = "amac_base", "idm_base"; + interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + amac1: ethernet@23000 { + compatible = "brcm,nsp-amac"; + reg = <0x023000 0x1000>, + <0x111000 0x1000>; + reg-names = "amac_base", "idm_base"; + interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + nand: nand@26000 { compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1"; reg = <0x026000 0x600>, @@ -223,6 +241,14 @@ brcm,nand-has-wp; }; + pwm: pwm@31000 { + compatible = "brcm,iproc-pwm"; + reg = <0x31000 0x28>; + clocks = <&osc>; + #pwm-cells = <3>; + status = "disabled"; + }; + rng: rng@33000 { compatible = "brcm,bcm-nsp-rng"; reg = <0x33000 0x14>; @@ -246,6 +272,17 @@ clock-names = "apb_pclk"; }; + srab: srab@36000 { + compatible = "brcm,nsp-srab"; + reg = <0x36000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + + status = "disabled"; + + /* ports are defined in board DTS */ + }; + i2c0: i2c@38000 { compatible = "brcm,iproc-i2c"; reg = <0x38000 0x50>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts index 35ff4e7a..f7f9db3 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a-plus.dts @@ -1,6 +1,7 @@ /dts-v1/; #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" / { compatible = "raspberrypi,model-a-plus", "brcm,bcm2835"; diff --git a/arch/arm/boot/dts/bcm2835-rpi-a.dts b/arch/arm/boot/dts/bcm2835-rpi-a.dts index 306a84e..8be102f 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-a.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-a.dts @@ -1,6 +1,7 @@ /dts-v1/; #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" / { compatible = "raspberrypi,model-a", "brcm,bcm2835"; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts index d5fdb8e..35cde65 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-plus.dts @@ -2,6 +2,7 @@ #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" #include "bcm283x-rpi-smsc9514.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" / { compatible = "raspberrypi,model-b-plus", "brcm,bcm2835"; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts index bfc4bd9..84df85e 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b-rev2.dts @@ -2,6 +2,7 @@ #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" #include "bcm283x-rpi-smsc9512.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" / { compatible = "raspberrypi,model-b-rev2", "brcm,bcm2835"; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 0371bb7..8e626a8 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -2,6 +2,7 @@ #include "bcm2835.dtsi" #include "bcm2835-rpi.dtsi" #include "bcm283x-rpi-smsc9512.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" / { compatible = "raspberrypi,model-b", "brcm,bcm2835"; diff --git a/arch/arm/boot/dts/bcm2835-rpi-zero.dts b/arch/arm/boot/dts/bcm2835-rpi-zero.dts new file mode 100644 index 0000000..60e359f --- /dev/null +++ b/arch/arm/boot/dts/bcm2835-rpi-zero.dts @@ -0,0 +1,40 @@ +/* + * Copyright (C) 2016 Stefan Wahren <stefan.wahren@i2se.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +#include "bcm2835.dtsi" +#include "bcm2835-rpi.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" + +/ { + compatible = "raspberrypi,model-zero", "brcm,bcm2835"; + model = "Raspberry Pi Zero"; + + leds { + act { + gpios = <&gpio 47 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&gpio { + pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>; + + /* I2S interface */ + i2s_alt0: i2s_alt0 { + brcm,pins = <18 19 20 21>; + brcm,function = <BCM2835_FSEL_ALT0>; + }; +}; + +&hdmi { + hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>; +}; diff --git a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts index 29e1cfe..39dccf6 100644 --- a/arch/arm/boot/dts/bcm2836-rpi-2-b.dts +++ b/arch/arm/boot/dts/bcm2836-rpi-2-b.dts @@ -2,6 +2,7 @@ #include "bcm2836.dtsi" #include "bcm2835-rpi.dtsi" #include "bcm283x-rpi-smsc9514.dtsi" +#include "bcm283x-rpi-usb-host.dtsi" / { compatible = "raspberrypi,2-model-b", "brcm,bcm2836"; diff --git a/arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi b/arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi new file mode 100644 index 0000000..73f4ece --- /dev/null +++ b/arch/arm/boot/dts/bcm283x-rpi-usb-host.dtsi @@ -0,0 +1,3 @@ +&usb { + dr_mode = "host"; +}; diff --git a/arch/arm/boot/dts/bcm283x.dtsi b/arch/arm/boot/dts/bcm283x.dtsi index b982522..5472800 100644 --- a/arch/arm/boot/dts/bcm283x.dtsi +++ b/arch/arm/boot/dts/bcm283x.dtsi @@ -289,6 +289,8 @@ interrupts = <1 9>; #address-cells = <1>; #size-cells = <0>; + clocks = <&clk_usb>; + clock-names = "otg"; }; v3d: v3d@7ec00000 { @@ -316,5 +318,12 @@ clock-frequency = <19200000>; }; + clk_usb: clock@4 { + compatible = "fixed-clock"; + reg = <4>; + #clock-cells = <0>; + clock-output-names = "otg"; + clock-frequency = <480000000>; + }; }; }; diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi index 8af4791..ae4b388 100644 --- a/arch/arm/boot/dts/bcm5301x.dtsi +++ b/arch/arm/boot/dts/bcm5301x.dtsi @@ -140,6 +140,15 @@ }; }; + usb2_phy: usb2-phy { + compatible = "brcm,ns-usb2-phy"; + reg = <0x1800c000 0x1000>; + reg-names = "dmu"; + #phy-cells = <0>; + clocks = <&genpll BCM_NSP_GENPLL_USB_PHY_REF_CLK>; + clock-names = "phy-ref-clk"; + }; + axi@18000000 { compatible = "brcm,bus-axi"; reg = <0x18000000 0x1000>; @@ -232,6 +241,8 @@ #address-cells = <1>; #size-cells = <1>; + + phys = <&usb2_phy>; }; usb3: usb3@23000 { diff --git a/arch/arm/boot/dts/bcm958522er.dts b/arch/arm/boot/dts/bcm958522er.dts new file mode 100644 index 0000000..a21b0fd --- /dev/null +++ b/arch/arm/boot/dts/bcm958522er.dts @@ -0,0 +1,130 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-nsp.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "NorthStar Plus SVK (BCM958522ER)"; + compatible = "brcm,bcm58522", "brcm,nsp"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + priority = <200>; + }; +}; + +/* USB 2/3 support needed to be complete */ + +&amac0 { + status = "okay"; +}; + + +&amac1 { + status = "okay"; +}; + +&nand { + nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "nrootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "ncustfs"; + reg = <0x04000000 0x3c000000>; + }; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&nand_sel>; + nand_sel: nand_sel { + function = "nand"; + groups = "nand_grp"; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm958525er.dts b/arch/arm/boot/dts/bcm958525er.dts new file mode 100644 index 0000000..be7f2f8 --- /dev/null +++ b/arch/arm/boot/dts/bcm958525er.dts @@ -0,0 +1,142 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-nsp.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "NorthStar Plus SVK (BCM958525ER)"; + compatible = "brcm,bcm58525", "brcm,nsp"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + priority = <200>; + }; +}; + +/* USB 2/3 support needed to be complete */ + +&amac0 { + status = "okay"; +}; + + +&amac1 { + status = "okay"; +}; + +&nand { + nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "nrootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "ncustfs"; + reg = <0x04000000 0x3c000000>; + }; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&nand_sel>; + nand_sel: nand_sel { + function = "nand"; + groups = "nand_grp"; + }; +}; + +&sata_phy0 { + status = "okay"; +}; + +&sata_phy1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm958525xmc.dts b/arch/arm/boot/dts/bcm958525xmc.dts index d257e83..959cde9 100644 --- a/arch/arm/boot/dts/bcm958525xmc.dts +++ b/arch/arm/boot/dts/bcm958525xmc.dts @@ -33,6 +33,7 @@ /dts-v1/; #include "bcm-nsp.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "NorthStar Plus XMC (BCM958525xmc)"; @@ -45,6 +46,35 @@ chosen { stdout-path = "serial0:115200n8"; }; + + memory { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpioa 31 GPIO_ACTIVE_LOW>; + priority = <200>; + }; +}; + +&i2c0 { + temperature-sensor@4c { + compatible = "adi,adt7461a"; + reg = <0x4c>; + }; + + eeprom@52 { + compatible = "atmel,24c02"; + reg = <0x52>; + pagesize = <16>; + }; + + rtc@68 { + compatible = "st,m41t81"; + reg = <0x68>; + }; }; &nand { @@ -85,7 +115,7 @@ }; }; -/* XHCI, SATA, MMC, and Ethernet support needed to be complete */ +/* XHCI, MMC, and Ethernet support needed to be complete */ &uart0 { status = "okay"; @@ -99,6 +129,18 @@ status = "okay"; }; +&sata_phy0 { + status = "okay"; +}; + +&sata_phy1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + &pinctrl { pinctrl-names = "default"; pinctrl-0 = <&nand_sel>; diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts new file mode 100644 index 0000000..ad2aa87 --- /dev/null +++ b/arch/arm/boot/dts/bcm958622hr.dts @@ -0,0 +1,170 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-nsp.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "NorthStar Plus SVK (BCM958622HR)"; + compatible = "brcm,bcm58622", "brcm,nsp"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + priority = <200>; + }; +}; + +/* USB 2/3 and SLIC support needed to be complete */ + +&amac0 { + status = "okay"; +}; + +&nand { + nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "nrootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "ncustfs"; + reg = <0x04000000 0x3c000000>; + }; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&nand_sel>; + nand_sel: nand_sel { + function = "nand"; + groups = "nand_grp"; + }; +}; + +&srab { + compatible = "brcm,bcm58622-srab", "brcm,nsp-srab"; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + label = "port0"; + reg = <0>; + }; + + port@1 { + label = "port1"; + reg = <1>; + }; + + port@2 { + label = "port2"; + reg = <2>; + }; + + port@3 { + label = "port3"; + reg = <3>; + }; + + port@4 { + label = "port4"; + reg = <4>; + }; + + port@5 { + ethernet = <&amac0>; + label = "cpu"; + reg = <5>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts new file mode 100644 index 0000000..4ceb8fe --- /dev/null +++ b/arch/arm/boot/dts/bcm958623hr.dts @@ -0,0 +1,178 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-nsp.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "NorthStar Plus SVK (BCM958623HR)"; + compatible = "brcm,bcm58623", "brcm,nsp"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + priority = <200>; + }; +}; + +/* USB 2/3 and SLIC support needed to be complete */ + +&amac0 { + status = "okay"; +}; + +&nand { + nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "nrootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "ncustfs"; + reg = <0x04000000 0x3c000000>; + }; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&nand_sel>; + nand_sel: nand_sel { + function = "nand"; + groups = "nand_grp"; + }; +}; + +&srab { + compatible = "brcm,bcm58623-srab", "brcm,nsp-srab"; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + label = "port0"; + reg = <0>; + }; + + port@1 { + label = "port1"; + reg = <1>; + }; + + port@2 { + label = "port2"; + reg = <2>; + }; + + port@3 { + label = "port3"; + reg = <3>; + }; + + port@4 { + label = "port4"; + reg = <4>; + }; + + port@5 { + ethernet = <&amac0>; + label = "cpu"; + reg = <5>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; + +&sata_phy0 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts index 03b8bbe..4420025 100644 --- a/arch/arm/boot/dts/bcm958625hr.dts +++ b/arch/arm/boot/dts/bcm958625hr.dts @@ -33,6 +33,7 @@ /dts-v1/; #include "bcm-nsp.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "NorthStar Plus SVK (BCM958625HR)"; @@ -47,7 +48,14 @@ }; memory { - reg = <0x60000000 0x20000000>; + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + priority = <200>; }; }; @@ -109,3 +117,64 @@ groups = "nand_grp"; }; }; + +&amac0 { + status = "okay"; +}; + +&srab { + compatible = "brcm,bcm58625-srab", "brcm,nsp-srab"; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + label = "port0"; + reg = <0>; + }; + + port@1 { + label = "port1"; + reg = <1>; + }; + + port@2 { + label = "port2"; + reg = <2>; + }; + + port@3 { + label = "port3"; + reg = <3>; + }; + + port@4 { + label = "port4"; + reg = <4>; + }; + + port@5 { + ethernet = <&amac0>; + label = "cpu"; + reg = <5>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; + +&sata_phy0 { + status = "okay"; +}; + +&sata_phy1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts index 2d84226..05c5f98 100644 --- a/arch/arm/boot/dts/bcm958625k.dts +++ b/arch/arm/boot/dts/bcm958625k.dts @@ -46,6 +46,11 @@ chosen { stdout-path = "serial0:115200n8"; }; + + memory { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; }; &uart0 { @@ -56,6 +61,14 @@ status = "okay"; }; +&amac0 { + status = "okay"; +}; + +&amac1 { + status = "okay"; +}; + &pcie0 { status = "okay"; }; diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts new file mode 100644 index 0000000..104afe9 --- /dev/null +++ b/arch/arm/boot/dts/bcm988312hr.dts @@ -0,0 +1,182 @@ +/* + * BSD LICENSE + * + * Copyright(c) 2016 Broadcom. All rights reserved. + * + * Redistribution and use in source and binary forms, with or without + * modification, are permitted provided that the following conditions + * are met: + * + * * Redistributions of source code must retain the above copyright + * notice, this list of conditions and the following disclaimer. + * * Redistributions in binary form must reproduce the above copyright + * notice, this list of conditions and the following disclaimer in + * the documentation and/or other materials provided with the + * distribution. + * * Neither the name of Broadcom Corporation nor the names of its + * contributors may be used to endorse or promote products derived + * from this software without specific prior written permission. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS + * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT + * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR + * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT + * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT + * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, + * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY + * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE + * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + */ + +/dts-v1/; + +#include "bcm-nsp.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "NorthStar Plus SVK (BCM988312HR)"; + compatible = "brcm,bcm88312", "brcm,nsp"; + + aliases { + serial0 = &uart0; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x60000000 0x80000000>; + }; + + gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpioa 15 GPIO_ACTIVE_LOW>; + priority = <200>; + }; +}; + +/* USB 2/3 support needed to be complete */ + +&amac0 { + status = "okay"; +}; + +&nand { + nandcs@0 { + compatible = "brcm,nandcs"; + reg = <0>; + nand-on-flash-bbt; + + #address-cells = <1>; + #size-cells = <1>; + + nand-ecc-strength = <24>; + nand-ecc-step-size = <1024>; + + brcm,nand-oob-sector-size = <27>; + + partition@0 { + label = "nboot"; + reg = <0x00000000 0x00200000>; + read-only; + }; + partition@200000 { + label = "nenv"; + reg = <0x00200000 0x00400000>; + }; + partition@600000 { + label = "nsystem"; + reg = <0x00600000 0x00a00000>; + }; + partition@1000000 { + label = "nrootfs"; + reg = <0x01000000 0x03000000>; + }; + partition@4000000 { + label = "ncustfs"; + reg = <0x04000000 0x3c000000>; + }; + }; +}; + +&pcie0 { + status = "okay"; +}; + +&pcie1 { + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&nand_sel>; + nand_sel: nand_sel { + function = "nand"; + groups = "nand_grp"; + }; +}; + +&sata_phy0 { + status = "okay"; +}; + +&sata_phy1 { + status = "okay"; +}; + +&sata { + status = "okay"; +}; + +&srab { + compatible = "brcm,bcm88312-srab", "brcm,nsp-srab"; + status = "okay"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + label = "port0"; + reg = <0>; + }; + + port@1 { + label = "port1"; + reg = <1>; + }; + + port@2 { + label = "port2"; + reg = <2>; + }; + + port@3 { + label = "port3"; + reg = <3>; + }; + + port@4 { + label = "port4"; + reg = <4>; + }; + + port@5 { + ethernet = <&amac0>; + label = "cpu"; + reg = <5>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + }; +}; + +&uart0 { + status = "okay"; +}; |