Merge branch 'omap-upstream' into for-next

Conflicts:
	arch/arm/mach-omap2/Makefile

21 files changed, 910 insertions, 328 deletions

diff --git a/MAINTAINERS b/MAINTAINERS
index 77cbfb1..ee86be0 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4127,6 +4127,69 @@ S:	Maintained
 F:	drivers/video/riva/
 F:	drivers/video/nvidia/
 
+OMAP SUPPORT
+P:	Tony Lindgren <tony@atomide.com>
+M:	tony@atomide.com
+L:	linux-omap@vger.kernel.org
+W:	http://www.muru.com/linux/omap/
+W:	http://linux.omap.com/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git
+S:	Maintained
+F:	arch/arm/*omap*
+
+OMAP CLOCK FRAMEWORK SUPPORT
+P:	Paul Walmsley
+M:	paul@pwsan.com
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	arch/arm/*omap*/*clock*
+
+OMAP POWER MANAGEMENT SUPPORT
+P:	Kevin Hilman
+M:	khilman@deeprootsystems.com
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	arch/arm/*omap*/*pm*
+
+OMAP AUDIO SUPPORT
+P:	Jarkko Nikula
+M:	jhnikula@gmail.com
+L:	alsa-devel@alsa-project.org (subscribers-only)
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	sound/soc/omap/
+
+OMAP FRAMEBUFFER SUPPORT
+P:	Imre Deak
+M:	imre.deak@nokia.com
+L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	drivers/video/omap/
+
+OMAP MMC SUPPORT
+P:	Jarkko Lavinen
+M:	jarkko.lavinen@nokia.com
+L:	linux-kernel@vger.kernel.org
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+F:	drivers/mmc/host/*omap*
+
+OMAP RANDOM NUMBER GENERATOR SUPPORT
+P:	Deepak Saxena
+M:	dsaxena@plexity.net
+S:	Maintained
+F:	drivers/char/hw_random/omap-rng.c
+
+OMAP USB SUPPORT
+P:	Felipe Balbi
+M:	felipe.balbi@nokia.com
+P:	David Brownell
+M:	dbrownell@users.sourceforge.net
+L:	linux-usb@vger.kernel.org
+L:	linux-omap@vger.kernel.org
+S:	Maintained
+
 OMFS FILESYSTEM
 P:	Bob Copeland
 M:	me@bobcopeland.com
@@ -5515,20 +5578,6 @@ F:	drivers/misc/tifm*
 F:	drivers/mmc/host/tifm_sd.c
 F:	include/linux/tifm.h
 
-TI OMAP MMC INTERFACE DRIVER
-P:	Carlos Aguiar, Anderson Briglia and Syed Khasim
-M:	linux-omap@vger.kernel.org
-W:	http://linux.omap.com
-W:	http://www.muru.com/linux/omap/
-S:	Maintained
-F:	drivers/mmc/host/omap.c
-
-TI OMAP RANDOM NUMBER GENERATOR SUPPORT
-P:	Deepak Saxena
-M:	dsaxena@plexity.net
-S:	Maintained
-F:	drivers/char/hw_random/omap-rng.c
-
 TIPC NETWORK LAYER
 P:	Per Liden
 M:	per.liden@ericsson.com
diff --git a/arch/arm/configs/rx51_defconfig b/arch/arm/configs/rx51_defconfig
index 593102da..eb2cb31 100644
--- a/arch/arm/configs/rx51_defconfig
+++ b/arch/arm/configs/rx51_defconfig
@@ -282,7 +282,7 @@ CONFIG_ALIGNMENT_TRAP=y
 #
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=4 root=ubi0:rootfs rootfstype=ubifs rw console=ttyMTD5"
+CONFIG_CMDLINE="init=/sbin/preinit ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs rootflags=bulk_read,no_chk_data_crc rw console=ttyMTD,log console=tty0"
 # CONFIG_XIP_KERNEL is not set
 # CONFIG_KEXEC is not set
 
diff --git a/arch/arm/mach-omap1/Kconfig b/arch/arm/mach-omap1/Kconfig
index cd8de89..55ecc01 100644
--- a/arch/arm/mach-omap1/Kconfig
+++ b/arch/arm/mach-omap1/Kconfig
@@ -46,7 +46,6 @@ config MACH_OMAP_H2
 config MACH_OMAP_H3
 	bool "TI H3 Support"
 	depends on ARCH_OMAP1 && ARCH_OMAP16XX
-#	select GPIOEXPANDER_OMAP
     	help
 	  TI OMAP 1710 H3 board support. Say Y here if you have such
 	  a board.
diff --git a/arch/arm/mach-omap1/Makefile b/arch/arm/mach-omap1/Makefile
index 1bda8f5..6867cd3 100644
--- a/arch/arm/mach-omap1/Makefile
+++ b/arch/arm/mach-omap1/Makefile
@@ -13,6 +13,10 @@ obj-$(CONFIG_OMAP_32K_TIMER)	+= timer32k.o
 # Power Management
 obj-$(CONFIG_PM) += pm.o sleep.o
 
+# DSP
+obj-$(CONFIG_OMAP_MBOX_FWK)	+= mailbox_mach.o
+mailbox_mach-objs		:= mailbox.o
+
 led-y := leds.o
 
 # Specific board support
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index d1ed136..e70fc7c 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -33,8 +33,11 @@
 #include <mach/common.h>
 #include <mach/dsp_common.h>
 #include <mach/omapfb.h>
+#include <mach/hwa742.h>
 #include <mach/lcd_mipid.h>
 #include <mach/mmc.h>
+#include <mach/usb.h>
+#include <mach/clock.h>
 
 #define ADS7846_PENDOWN_GPIO	15
 
@@ -162,6 +165,15 @@ static struct spi_board_info nokia770_spi_board_info[] __initdata = {
 	},
 };
 
+static struct hwa742_platform_data nokia770_hwa742_platform_data = {
+	.te_connected		= 1,
+};
+
+static void hwa742_dev_init(void)
+{
+	clk_add_alias("hwa_sys_ck", NULL, "bclk", NULL);
+	omapfb_set_ctrl_platform_data(&nokia770_hwa742_platform_data);
+}
 
 /* assume no Mini-AB port */
 
@@ -370,6 +382,7 @@ static void __init omap_nokia770_init(void)
 	omap_serial_init();
 	omap_register_i2c_bus(1, 100, NULL, 0);
 	omap_dsp_init();
+	hwa742_dev_init();
 	ads7846_dev_init();
 	mipid_dev_init();
 	omap_usb_init(&nokia770_usb_config);
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile
index 3935a35..516477e 100644
--- a/arch/arm/mach-omap2/Makefile
+++ b/arch/arm/mach-omap2/Makefile
@@ -58,3 +58,9 @@ obj-$(CONFIG_MACH_NOKIA_RX51)		+= board-rx51.o \
 
 # Platform specific device init code
 obj-y					+= usb-musb.o
+
+onenand-$(CONFIG_MTD_ONENAND_OMAP2)	:= gpmc-onenand.o
+obj-y					+= $(onenand-m) $(onenand-y)
+
+smc91x-$(CONFIG_SMC91X)			:= gpmc-smc91x.o
+obj-y					+= $(smc91x-m) $(smc91x-y)
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 2214365..9c3fdcd 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -36,14 +36,12 @@
 #include <mach/common.h>
 #include <mach/gpmc.h>
 #include <mach/usb.h>
+#include <mach/gpmc-smc91x.h>
 
 #include "mmc-twl4030.h"
 
 #define SDP2430_CS0_BASE	0x04000000
-#define	SDP2430_FLASH_CS	0
-#define	SDP2430_SMC91X_CS	5
-
-#define SDP2430_ETHR_GPIO_IRQ		149
+#define SECONDARY_LCD_GPIO		147
 
 static struct mtd_partition sdp2430_partitions[] = {
 	/* bootloader (U-Boot, etc) in first sector */
@@ -99,100 +97,53 @@ static struct platform_device sdp2430_flash_device = {
 	.resource	= &sdp2430_flash_resource,
 };
 
-static struct resource sdp2430_smc91x_resources[] = {
-	[0] = {
-		.start	= SDP2430_CS0_BASE,
-		.end	= SDP2430_CS0_BASE + SZ_64M - 1,
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
-		.end	= OMAP_GPIO_IRQ(SDP2430_ETHR_GPIO_IRQ),
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct platform_device sdp2430_smc91x_device = {
-	.name		= "smc91x",
+static struct platform_device sdp2430_lcd_device = {
+	.name		= "sdp2430_lcd",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sdp2430_smc91x_resources),
-	.resource	= sdp2430_smc91x_resources,
 };
 
 static struct platform_device *sdp2430_devices[] __initdata = {
-	&sdp2430_smc91x_device,
 	&sdp2430_flash_device,
+	&sdp2430_lcd_device,
 };
 
-static inline void __init sdp2430_init_smc91x(void)
-{
-	int eth_cs;
-	unsigned long cs_mem_base;
-	unsigned int rate;
-	struct clk *gpmc_fck;
+static struct omap_lcd_config sdp2430_lcd_config __initdata = {
+	.ctrl_name	= "internal",
+};
 
-	eth_cs = SDP2430_SMC91X_CS;
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91x_MODULE)
 
-	gpmc_fck = clk_get(NULL, "gpmc_fck");	/* Always on ENABLE_ON_INIT */
-	if (IS_ERR(gpmc_fck)) {
-		WARN_ON(1);
-		return;
-	}
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs		= 5,
+	.gpio_irq	= 149,
+	.flags		= GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
+				IORESOURCE_IRQ_LOWLEVEL,
 
-	clk_enable(gpmc_fck);
-	rate = clk_get_rate(gpmc_fck);
-
-	/* Make sure CS1 timings are correct, for 2430 always muxed */
-	gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG1, 0x00011200);
-
-	if (rate >= 160000000) {
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f01);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080803);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1c0b1c0a);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
-	} else if (rate >= 130000000) {
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x041f1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000004C4);
-	} else { /* rate = 100000000 */
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG2, 0x001f1f00);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG3, 0x00080802);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG4, 0x1C091C09);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG5, 0x031A1F1F);
-		gpmc_cs_write_reg(eth_cs, GPMC_CS_CONFIG6, 0x000003C2);
-	}
+};
 
-	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		goto out;
-	}
+static void __init board_smc91x_init(void)
+{
+	if (omap_rev() > OMAP3430_REV_ES1_0)
+		board_smc91x_data.gpio_irq = 6;
+	else
+		board_smc91x_data.gpio_irq = 29;
 
-	sdp2430_smc91x_resources[0].start = cs_mem_base + 0x300;
-	sdp2430_smc91x_resources[0].end = cs_mem_base + 0x30f;
-	udelay(100);
+	gpmc_smc91x_init(&board_smc91x_data);
+}
 
-	if (gpio_request(SDP2430_ETHR_GPIO_IRQ, "SMC91x irq") < 0) {
-		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
-			SDP2430_ETHR_GPIO_IRQ);
-		gpmc_cs_free(eth_cs);
-		goto out;
-	}
-	gpio_direction_input(SDP2430_ETHR_GPIO_IRQ);
+#else
 
-out:
-	clk_disable(gpmc_fck);
-	clk_put(gpmc_fck);
+static inline void board_smc91x_init(void)
+{
 }
 
+#endif
+
 static void __init omap_2430sdp_init_irq(void)
 {
 	omap2_init_common_hw(NULL);
 	omap_init_irq();
 	omap_gpio_init();
-	sdp2430_init_smc91x();
 }
 
 static struct omap_uart_config sdp2430_uart_config __initdata = {
@@ -201,6 +152,7 @@ static struct omap_uart_config sdp2430_uart_config __initdata = {
 
 static struct omap_board_config_kernel sdp2430_config[] = {
 	{OMAP_TAG_UART, &sdp2430_uart_config},
+	{OMAP_TAG_LCD, &sdp2430_lcd_config},
 };
 
 
@@ -248,6 +200,8 @@ static struct twl4030_hsmmc_info mmc[] __initdata = {
 
 static void __init omap_2430sdp_init(void)
 {
+	int ret;
+
 	omap2430_i2c_init();
 
 	platform_add_devices(sdp2430_devices, ARRAY_SIZE(sdp2430_devices));
@@ -256,6 +210,12 @@ static void __init omap_2430sdp_init(void)
 	omap_serial_init();
 	twl4030_mmc_init(mmc);
 	usb_musb_init();
+	board_smc91x_init();
+
+	/* Turn off secondary LCD backlight */
+	ret = gpio_request(SECONDARY_LCD_GPIO, "Secondary LCD backlight");
+	if (ret == 0)
+		gpio_direction_output(SECONDARY_LCD_GPIO, 0);
 }
 
 static void __init omap_2430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index ed92749..0e63695 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -39,15 +39,12 @@
 
 #include <mach/control.h>
 #include <mach/keypad.h>
+#include <mach/gpmc-smc91x.h>
 
 #include "mmc-twl4030.h"
 
 #define CONFIG_DISABLE_HFCLK 1
 
-#define SDP3430_ETHR_GPIO_IRQ_SDPV1	29
-#define SDP3430_ETHR_GPIO_IRQ_SDPV2	6
-#define SDP3430_SMC91X_CS		3
-
 #define SDP3430_TS_GPIO_IRQ_SDPV1	3
 #define SDP3430_TS_GPIO_IRQ_SDPV2	2
 
@@ -56,24 +53,6 @@
 
 #define TWL4030_MSECURE_GPIO 22
 
-static struct resource sdp3430_smc91x_resources[] = {
-	[0] = {
-		.flags	= IORESOURCE_MEM,
-	},
-	[1] = {
-		.start	= 0,
-		.end	= 0,
-		.flags	= IORESOURCE_IRQ | IORESOURCE_IRQ_LOWLEVEL,
-	},
-};
-
-static struct platform_device sdp3430_smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(sdp3430_smc91x_resources),
-	.resource	= sdp3430_smc91x_resources,
-};
-
 static int sdp3430_keymap[] = {
 	KEY(0, 0, KEY_LEFT),
 	KEY(0, 1, KEY_RIGHT),
@@ -184,48 +163,14 @@ static struct regulator_consumer_supply sdp3430_vdvi_supply = {
 };
 
 static struct platform_device *sdp3430_devices[] __initdata = {
-	&sdp3430_smc91x_device,
 	&sdp3430_lcd_device,
 };
 
-static inline void __init sdp3430_init_smc91x(void)
-{
-	int eth_cs;
-	unsigned long cs_mem_base;
-	int eth_gpio = 0;
-
-	eth_cs = SDP3430_SMC91X_CS;
-
-	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		return;
-	}
-
-	sdp3430_smc91x_resources[0].start = cs_mem_base + 0x300;
-	sdp3430_smc91x_resources[0].end = cs_mem_base + 0x30f;
-	udelay(100);
-
-	if (omap_rev() > OMAP3430_REV_ES1_0)
-		eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV2;
-	else
-		eth_gpio = SDP3430_ETHR_GPIO_IRQ_SDPV1;
-
-	sdp3430_smc91x_resources[1].start = gpio_to_irq(eth_gpio);
-
-	if (gpio_request(eth_gpio, "SMC91x irq") < 0) {
-		printk(KERN_ERR "Failed to request GPIO%d for smc91x IRQ\n",
-			eth_gpio);
-		return;
-	}
-	gpio_direction_input(eth_gpio);
-}
-
 static void __init omap_3430sdp_init_irq(void)
 {
 	omap2_init_common_hw(NULL);
 	omap_init_irq();
 	omap_gpio_init();
-	sdp3430_init_smc91x();
 }
 
 static struct omap_uart_config sdp3430_uart_config __initdata = {
@@ -506,6 +451,32 @@ static int __init omap3430_i2c_init(void)
 	return 0;
 }
 
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs		= 3,
+	.flags		= GPMC_MUX_ADD_DATA | GPMC_TIMINGS_SMC91C96 |
+				IORESOURCE_IRQ_LOWLEVEL,
+};
+
+static void __init board_smc91x_init(void)
+{
+	if (omap_rev() > OMAP3430_REV_ES1_0)
+		board_smc91x_data.gpio_irq = 6;
+	else
+		board_smc91x_data.gpio_irq = 29;
+
+	gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif
+
 static void __init omap_3430sdp_init(void)
 {
 	omap3430_i2c_init();
@@ -522,6 +493,7 @@ static void __init omap_3430sdp_init(void)
 	ads7846_dev_init();
 	omap_serial_init();
 	usb_musb_init();
+	board_smc91x_init();
 }
 
 static void __init omap_3430sdp_map_io(void)
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index a738172..233c745 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -27,31 +27,11 @@
 #include <mach/dma.h>
 #include <mach/gpmc.h>
 #include <mach/keypad.h>
+#include <mach/onenand.h>
+#include <mach/gpmc-smc91x.h>
 
 #include "mmc-twl4030.h"
 
-
-#define SMC91X_CS			1
-#define SMC91X_GPIO_IRQ			54
-#define SMC91X_GPIO_RESET		164
-#define SMC91X_GPIO_PWRDWN		86
-
-static struct resource rx51_smc91x_resources[] = {
-	[0] = {
-		.flags		= IORESOURCE_MEM,
-	},
-	[1] = {
-		.flags		= IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
-	},
-};
-
-static struct platform_device rx51_smc91x_device = {
-	.name		= "smc91x",
-	.id		= -1,
-	.num_resources	= ARRAY_SIZE(rx51_smc91x_resources),
-	.resource	= rx51_smc91x_resources,
-};
-
 static int rx51_keymap[] = {
 	KEY(0, 0, KEY_Q),
 	KEY(0, 1, KEY_W),
@@ -107,98 +87,6 @@ static struct twl4030_keypad_data rx51_kp_data = {
 	.rep		= 1,
 };
 
-static struct platform_device *rx51_peripherals_devices[] = {
-	&rx51_smc91x_device,
-};
-
-/*
- * Timings are taken from smsc-lan91c96-ms.pdf
- */
-static int smc91x_init_gpmc(int cs)
-{
-	struct gpmc_timings t;
-	const int t2_r = 45;		/* t2 in Figure 12.10 */
-	const int t2_w = 30;		/* t2 in Figure 12.11 */
-	const int t3 = 15;		/* t3 in Figure 12.10 */
-	const int t5_r = 0;		/* t5 in Figure 12.10 */
-	const int t6_r = 45;		/* t6 in Figure 12.10 */
-	const int t6_w = 0;		/* t6 in Figure 12.11 */
-	const int t7_w = 15;		/* t7 in Figure 12.11 */
-	const int t15 = 12;		/* t15 in Figure 12.2 */
-	const int t20 = 185;		/* t20 in Figure 12.2 */
-
-	memset(&t, 0, sizeof(t));
-
-	t.cs_on = t15;
-	t.cs_rd_off = t3 + t2_r + t5_r;	/* Figure 12.10 */
-	t.cs_wr_off = t3 + t2_w + t6_w;	/* Figure 12.11 */
-	t.adv_on = t3;			/* Figure 12.10 */
-	t.adv_rd_off = t3 + t2_r;	/* Figure 12.10 */
-	t.adv_wr_off = t3 + t2_w;	/* Figure 12.11 */
-	t.oe_off = t3 + t2_r + t5_r;	/* Figure 12.10 */
-	t.oe_on = t.oe_off - t6_r;	/* Figure 12.10 */
-	t.we_off = t3 + t2_w + t6_w;	/* Figure 12.11 */
-	t.we_on = t.we_off - t7_w;	/* Figure 12.11 */
-	t.rd_cycle = t20;		/* Figure 12.2 */
-	t.wr_cycle = t20;		/* Figure 12.4 */
-	t.access = t3 + t2_r + t5_r;	/* Figure 12.10 */
-	t.wr_access = t3 + t2_w + t6_w;	/* Figure 12.11 */
-
-	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1, GPMC_CONFIG1_DEVICESIZE_16);
-
-	return gpmc_cs_set_timings(cs, &t);
-}
-
-static void __init rx51_init_smc91x(void)
-{
-	unsigned long cs_mem_base;
-	int ret;
-
-	omap_cfg_reg(U8_34XX_GPIO54_DOWN);
-	omap_cfg_reg(G25_34XX_GPIO86_OUT);
-	omap_cfg_reg(H19_34XX_GPIO164_OUT);
-
-	if (gpmc_cs_request(SMC91X_CS, SZ_16M, &cs_mem_base) < 0) {
-		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
-		return;
-	}
-
-	rx51_smc91x_resources[0].start = cs_mem_base + 0x300;
-	rx51_smc91x_resources[0].end = cs_mem_base + 0x30f;
-
-	smc91x_init_gpmc(SMC91X_CS);
-
-	if (gpio_request(SMC91X_GPIO_IRQ, "SMC91X irq") < 0)
-		goto free1;
-
-	gpio_direction_input(SMC91X_GPIO_IRQ);
-	rx51_smc91x_resources[1].start = gpio_to_irq(SMC91X_GPIO_IRQ);
-
-	ret = gpio_request(SMC91X_GPIO_PWRDWN, "SMC91X powerdown");
-	if (ret)
-		goto free2;
-	gpio_direction_output(SMC91X_GPIO_PWRDWN, 0);
-
-	ret = gpio_request(SMC91X_GPIO_RESET, "SMC91X reset");
-	if (ret)
-		goto free3;
-	gpio_direction_output(SMC91X_GPIO_RESET, 0);
-	gpio_set_value(SMC91X_GPIO_RESET, 1);
-	msleep(100);
-	gpio_set_value(SMC91X_GPIO_RESET, 0);
-
-	return;
-
-free3:
-	gpio_free(SMC91X_GPIO_PWRDWN);
-free2:
-	gpio_free(SMC91X_GPIO_IRQ);
-free1:
-	gpmc_cs_free(SMC91X_CS);
-
-	printk(KERN_ERR "Could not initialize smc91x\n");
-}
-
 static struct twl4030_madc_platform_data rx51_madc_data = {
 	.irq_line		= 1,
 };
@@ -408,12 +296,94 @@ static int __init rx51_i2c_init(void)
 	return 0;
 }
 
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+static struct mtd_partition onenand_partitions[] = {
+	{
+		.name           = "bootloader",
+		.offset         = 0,
+		.size           = 0x20000,
+		.mask_flags     = MTD_WRITEABLE,	/* Force read-only */
+	},
+	{
+		.name           = "config",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x60000,
+	},
+	{
+		.name           = "log",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x40000,
+	},
+	{
+		.name           = "kernel",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x200000,
+	},
+	{
+		.name           = "initfs",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = 0x200000,
+	},
+	{
+		.name           = "rootfs",
+		.offset         = MTDPART_OFS_APPEND,
+		.size           = MTDPART_SIZ_FULL,
+	},
+};
+
+static struct omap_onenand_platform_data board_onenand_data = {
+	.cs		= 0,
+	.gpio_irq	= 65,
+	.parts		= onenand_partitions,
+	.nr_parts	= ARRAY_SIZE(onenand_partitions),
+};
+
+static void __init board_onenand_init(void)
+{
+	gpmc_onenand_init(&board_onenand_data);
+}
+
+#else
+
+static inline void board_onenand_init(void)
+{
+}
+
+#endif
+
+#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE)
+
+static struct omap_smc91x_platform_data board_smc91x_data = {
+	.cs		= 1,
+	.gpio_irq	= 54,
+	.gpio_pwrdwn	= 86,
+	.gpio_reset	= 164,
+	.flags		= GPMC_TIMINGS_SMC91C96 | IORESOURCE_IRQ_HIGHLEVEL,
+};
+
+static void __init board_smc91x_init(void)
+{
+	omap_cfg_reg(U8_34XX_GPIO54_DOWN);
+	omap_cfg_reg(G25_34XX_GPIO86_OUT);
+	omap_cfg_reg(H19_34XX_GPIO164_OUT);
+
+	gpmc_smc91x_init(&board_smc91x_data);
+}
+
+#else
+
+static inline void board_smc91x_init(void)
+{
+}
+
+#endif
 
 void __init rx51_peripherals_init(void)
 {
-	platform_add_devices(rx51_peripherals_devices,
-				ARRAY_SIZE(rx51_peripherals_devices));
 	rx51_i2c_init();
-	rx51_init_smc91x();
+	board_onenand_init();
+	board_smc91x_init();
 }
 
diff --git a/arch/arm/mach-omap2/gpmc-onenand.c b/arch/arm/mach-omap2/gpmc-onenand.c
new file mode 100644
index 0000000..2fd22f9
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-onenand.c
@@ -0,0 +1,330 @@
+/*
+ * linux/arch/arm/mach-omap2/gpmc-onenand.c
+ *
+ * Copyright (C) 2006 - 2009 Nokia Corporation
+ * Contacts:	Juha Yrjola
+ *		Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/onenand_regs.h>
+#include <linux/io.h>
+
+#include <asm/mach/flash.h>
+
+#include <mach/onenand.h>
+#include <mach/board.h>
+#include <mach/gpmc.h>
+
+static struct omap_onenand_platform_data *gpmc_onenand_data;
+
+static struct platform_device gpmc_onenand_device = {
+	.name		= "omap2-onenand",
+	.id		= -1,
+};
+
+static int omap2_onenand_set_async_mode(int cs, void __iomem *onenand_base)
+{
+	struct gpmc_timings t;
+
+	const int t_cer = 15;
+	const int t_avdp = 12;
+	const int t_aavdh = 7;
+	const int t_ce = 76;
+	const int t_aa = 76;
+	const int t_oe = 20;
+	const int t_cez = 20; /* max of t_cez, t_oez */
+	const int t_ds = 30;
+	const int t_wpl = 40;
+	const int t_wph = 30;
+
+	memset(&t, 0, sizeof(t));
+	t.sync_clk = 0;
+	t.cs_on = 0;
+	t.adv_on = 0;
+
+	/* Read */
+	t.adv_rd_off = gpmc_round_ns_to_ticks(max_t(int, t_avdp, t_cer));
+	t.oe_on  = t.adv_rd_off + gpmc_round_ns_to_ticks(t_aavdh);
+	t.access = t.adv_on + gpmc_round_ns_to_ticks(t_aa);
+	t.access = max_t(int, t.access, t.cs_on + gpmc_round_ns_to_ticks(t_ce));
+	t.access = max_t(int, t.access, t.oe_on + gpmc_round_ns_to_ticks(t_oe));
+	t.oe_off = t.access + gpmc_round_ns_to_ticks(1);
+	t.cs_rd_off = t.oe_off;
+	t.rd_cycle  = t.cs_rd_off + gpmc_round_ns_to_ticks(t_cez);
+
+	/* Write */
+	t.adv_wr_off = t.adv_rd_off;
+	t.we_on  = t.oe_on;
+	if (cpu_is_omap34xx()) {
+		t.wr_data_mux_bus = t.we_on;
+		t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds);
+	}
+	t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl);
+	t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
+	t.wr_cycle  = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
+
+	/* Configure GPMC for asynchronous read */
+	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
+			  GPMC_CONFIG1_DEVICESIZE_16 |
+			  GPMC_CONFIG1_MUXADDDATA);
+
+	return gpmc_cs_set_timings(cs, &t);
+}
+
+static void set_onenand_cfg(void __iomem *onenand_base, int latency,
+				int sync_read, int sync_write, int hf)
+{
+	u32 reg;
+
+	reg = readw(onenand_base + ONENAND_REG_SYS_CFG1);
+	reg &= ~((0x7 << ONENAND_SYS_CFG1_BRL_SHIFT) | (0x7 << 9));
+	reg |=	(latency << ONENAND_SYS_CFG1_BRL_SHIFT) |
+		ONENAND_SYS_CFG1_BL_16;
+	if (sync_read)
+		reg |= ONENAND_SYS_CFG1_SYNC_READ;
+	else
+		reg &= ~ONENAND_SYS_CFG1_SYNC_READ;
+	if (sync_write)
+		reg |= ONENAND_SYS_CFG1_SYNC_WRITE;
+	else
+		reg &= ~ONENAND_SYS_CFG1_SYNC_WRITE;
+	if (hf)
+		reg |= ONENAND_SYS_CFG1_HF;
+	else
+		reg &= ~ONENAND_SYS_CFG1_HF;
+	writew(reg, onenand_base + ONENAND_REG_SYS_CFG1);
+}
+
+static int omap2_onenand_set_sync_mode(struct omap_onenand_platform_data *cfg,
+					void __iomem *onenand_base,
+					int freq)
+{
+	struct gpmc_timings t;
+	const int t_cer  = 15;
+	const int t_avdp = 12;
+	const int t_cez  = 20; /* max of t_cez, t_oez */
+	const int t_ds   = 30;
+	const int t_wpl  = 40;
+	const int t_wph  = 30;
+	int min_gpmc_clk_period, t_ces, t_avds, t_avdh, t_ach, t_aavdh, t_rdyo;
+	int tick_ns, div, fclk_offset_ns, fclk_offset, gpmc_clk_ns, latency;
+	int first_time = 0, hf = 0, sync_read = 0, sync_write = 0;
+	int err, ticks_cez;
+	int cs = cfg->cs;
+	u32 reg;
+
+	if (cfg->flags & ONENAND_SYNC_READ) {
+		sync_read = 1;
+	} else if (cfg->flags & ONENAND_SYNC_READWRITE) {
+		sync_read = 1;
+		sync_write = 1;
+	}
+
+	if (!freq) {
+		/* Very first call freq is not known */
+		err = omap2_onenand_set_async_mode(cs, onenand_base);
+		if (err)
+			return err;
+		reg = readw(onenand_base + ONENAND_REG_VERSION_ID);
+		switch ((reg >> 4) & 0xf) {
+		case 0:
+			freq = 40;
+			break;
+		case 1:
+			freq = 54;
+			break;
+		case 2:
+			freq = 66;
+			break;
+		case 3:
+			freq = 83;
+			break;
+		case 4:
+			freq = 104;
+			break;
+		default:
+			freq = 54;
+			break;
+		}
+		first_time = 1;
+	}
+
+	switch (freq) {
+	case 83:
+		min_gpmc_clk_period = 12; /* 83 MHz */
+		t_ces   = 5;
+		t_avds  = 4;
+		t_avdh  = 2;
+		t_ach   = 6;
+		t_aavdh = 6;
+		t_rdyo  = 9;
+		break;
+	case 66:
+		min_gpmc_clk_period = 15; /* 66 MHz */
+		t_ces   = 6;
+		t_avds  = 5;
+		t_avdh  = 2;
+		t_ach   = 6;
+		t_aavdh = 6;
+		t_rdyo  = 11;
+		break;
+	default:
+		min_gpmc_clk_period = 18; /* 54 MHz */
+		t_ces   = 7;
+		t_avds  = 7;
+		t_avdh  = 7;
+		t_ach   = 9;
+		t_aavdh = 7;
+		t_rdyo  = 15;
+		sync_write = 0;
+		break;
+	}
+
+	tick_ns = gpmc_ticks_to_ns(1);
+	div = gpmc_cs_calc_divider(cs, min_gpmc_clk_period);
+	gpmc_clk_ns = gpmc_ticks_to_ns(div);
+	if (gpmc_clk_ns < 15) /* >66Mhz */
+		hf = 1;
+	if (hf)
+		latency = 6;
+	else if (gpmc_clk_ns >= 25) /* 40 MHz*/
+		latency = 3;
+	else
+		latency = 4;
+
+	if (first_time)
+		set_onenand_cfg(onenand_base, latency,
+					sync_read, sync_write, hf);
+
+	if (div == 1) {
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
+		reg |= (1 << 7);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg);
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3);
+		reg |= (1 << 7);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg);
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4);
+		reg |= (1 << 7);
+		reg |= (1 << 23);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
+	} else {
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG2);
+		reg &= ~(1 << 7);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG2, reg);
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG3);
+		reg &= ~(1 << 7);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG3, reg);
+		reg = gpmc_cs_read_reg(cs, GPMC_CS_CONFIG4);
+		reg &= ~(1 << 7);
+		reg &= ~(1 << 23);
+		gpmc_cs_write_reg(cs, GPMC_CS_CONFIG4, reg);
+	}
+
+	/* Set synchronous read timings */
+	memset(&t, 0, sizeof(t));
+	t.sync_clk = min_gpmc_clk_period;
+	t.cs_on = 0;
+	t.adv_on = 0;
+	fclk_offset_ns = gpmc_round_ns_to_ticks(max_t(int, t_ces, t_avds));
+	fclk_offset = gpmc_ns_to_ticks(fclk_offset_ns);
+	t.page_burst_access = gpmc_clk_ns;
+
+	/* Read */
+	t.adv_rd_off = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_avdh));
+	t.oe_on = gpmc_ticks_to_ns(fclk_offset + gpmc_ns_to_ticks(t_ach));
+	t.access = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div);
+	t.oe_off = t.access + gpmc_round_ns_to_ticks(1);
+	t.cs_rd_off = t.oe_off;
+	ticks_cez = ((gpmc_ns_to_ticks(t_cez) + div - 1) / div) * div;
+	t.rd_cycle = gpmc_ticks_to_ns(fclk_offset + (latency + 1) * div +
+		     ticks_cez);
+
+	/* Write */
+	if (sync_write) {
+		t.adv_wr_off = t.adv_rd_off;
+		t.we_on  = 0;
+		t.we_off = t.cs_rd_off;
+		t.cs_wr_off = t.cs_rd_off;
+		t.wr_cycle  = t.rd_cycle;
+		if (cpu_is_omap34xx()) {
+			t.wr_data_mux_bus = gpmc_ticks_to_ns(fclk_offset +
+					gpmc_ns_to_ticks(min_gpmc_clk_period +
+					t_rdyo));
+			t.wr_access = t.access;
+		}
+	} else {
+		t.adv_wr_off = gpmc_round_ns_to_ticks(max_t(int,
+							t_avdp, t_cer));
+		t.we_on  = t.adv_wr_off + gpmc_round_ns_to_ticks(t_aavdh);
+		t.we_off = t.we_on + gpmc_round_ns_to_ticks(t_wpl);
+		t.cs_wr_off = t.we_off + gpmc_round_ns_to_ticks(t_wph);
+		t.wr_cycle  = t.cs_wr_off + gpmc_round_ns_to_ticks(t_cez);
+		if (cpu_is_omap34xx()) {
+			t.wr_data_mux_bus = t.we_on;
+			t.wr_access = t.we_on + gpmc_round_ns_to_ticks(t_ds);
+		}
+	}
+
+	/* Configure GPMC for synchronous read */
+	gpmc_cs_write_reg(cs, GPMC_CS_CONFIG1,
+			  GPMC_CONFIG1_WRAPBURST_SUPP |
+			  GPMC_CONFIG1_READMULTIPLE_SUPP |
+			  (sync_read ? GPMC_CONFIG1_READTYPE_SYNC : 0) |
+			  (sync_write ? GPMC_CONFIG1_WRITEMULTIPLE_SUPP : 0) |
+			  (sync_write ? GPMC_CONFIG1_WRITETYPE_SYNC : 0) |
+			  GPMC_CONFIG1_CLKACTIVATIONTIME(fclk_offset) |
+			  GPMC_CONFIG1_PAGE_LEN(2) |
+			  (cpu_is_omap34xx() ? 0 :
+				(GPMC_CONFIG1_WAIT_READ_MON |
+				 GPMC_CONFIG1_WAIT_PIN_SEL(0))) |
+			  GPMC_CONFIG1_DEVICESIZE_16 |
+			  GPMC_CONFIG1_DEVICETYPE_NOR |
+			  GPMC_CONFIG1_MUXADDDATA);
+
+	err = gpmc_cs_set_timings(cs, &t);
+	if (err)
+		return err;
+
+	set_onenand_cfg(onenand_base, latency, sync_read, sync_write, hf);
+
+	return 0;
+}
+
+static int gpmc_onenand_setup(void __iomem *onenand_base, int freq)
+{
+	struct device *dev = &gpmc_onenand_device.dev;
+
+	/* Set sync timings in GPMC */
+	if (omap2_onenand_set_sync_mode(gpmc_onenand_data, onenand_base,
+			freq) < 0) {
+		dev_err(dev, "Unable to set synchronous mode\n");
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+void __init gpmc_onenand_init(struct omap_onenand_platform_data *_onenand_data)
+{
+	gpmc_onenand_data = _onenand_data;
+	gpmc_onenand_data->onenand_setup = gpmc_onenand_setup;
+	gpmc_onenand_device.dev.platform_data = gpmc_onenand_data;
+
+	if (cpu_is_omap24xx() &&
+			(gpmc_onenand_data->flags & ONENAND_SYNC_READWRITE)) {
+		printk(KERN_ERR "Onenand using only SYNC_READ on 24xx\n");
+		gpmc_onenand_data->flags &= ~ONENAND_SYNC_READWRITE;
+		gpmc_onenand_data->flags |= ONENAND_SYNC_READ;
+	}
+
+	if (platform_device_register(&gpmc_onenand_device) < 0) {
+		printk(KERN_ERR "Unable to register OneNAND device\n");
+		return;
+	}
+}
diff --git a/arch/arm/mach-omap2/gpmc-smc91x.c b/arch/arm/mach-omap2/gpmc-smc91x.c
new file mode 100644
index 0000000..df99d31
--- /dev/null
+++ b/arch/arm/mach-omap2/gpmc-smc91x.c
@@ -0,0 +1,189 @@
+/*
+ * linux/arch/arm/mach-omap2/gpmc-smc91x.c
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ * Contact:	Tony Lindgren
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/gpio.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/smc91x.h>
+
+#include <mach/board.h>
+#include <mach/gpmc.h>
+#include <mach/gpmc-smc91x.h>
+
+static struct omap_smc91x_platform_data *gpmc_cfg;
+
+static struct resource gpmc_smc91x_resources[] = {
+	[0] = {
+		.flags		= IORESOURCE_MEM,
+	},
+	[1] = {
+		.flags		= IORESOURCE_IRQ,
+	},
+};
+
+static struct smc91x_platdata gpmc_smc91x_info = {
+	.flags  = SMC91X_USE_16BIT | SMC91X_NOWAIT | SMC91X_IO_SHIFT_0,
+};
+
+static struct platform_device gpmc_smc91x_device = {
+	.name		= "smc91x",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(gpmc_smc91x_resources),
+	.resource	= gpmc_smc91x_resources,
+	.dev		= {
+		.platform_data = &gpmc_smc91x_info,
+	},
+};
+
+/*
+ * Set the gpmc timings for smc91c96. The timings are taken
+ * from the data sheet available at:
+ * http://www.smsc.com/main/catalog/lan91c96.html
+ * REVISIT: Level shifters can add at least to the access latency.
+ */
+static int smc91c96_gpmc_retime(void)
+{
+	struct gpmc_timings t;
+	const int t3 = 10;	/* Figure 12.2 read and 12.4 write */
+	const int t4_r = 20;	/* Figure 12.2 read */
+	const int t4_w = 5;	/* Figure 12.4 write */
+	const int t5 = 25;	/* Figure 12.2 read */
+	const int t6 = 15;	/* Figure 12.2 read */
+	const int t7 = 5;	/* Figure 12.4 write */
+	const int t8 = 5;	/* Figure 12.4 write */
+	const int t20 = 185;	/* Figure 12.2 read and 12.4 write */
+	u32 l;
+
+	memset(&t, 0, sizeof(t));
+
+	/* Read timings */
+	t.cs_on = 0;
+	t.adv_on = t.cs_on;
+	t.oe_on = t.adv_on + t3;
+	t.access = t.oe_on + t5;
+	t.oe_off = t.access;
+	t.adv_rd_off = t.oe_off + max(t4_r, t6);
+	t.cs_rd_off = t.oe_off;
+	t.rd_cycle = t20 - t.oe_on;
+
+	/* Write timings */
+	t.we_on = t.adv_on + t3;
+
+	if (cpu_is_omap34xx() && (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)) {
+		t.wr_data_mux_bus = t.we_on;
+		t.we_off = t.wr_data_mux_bus + t7;
+	} else
+		t.we_off = t.we_on + t7;
+	if (cpu_is_omap34xx())
+		t.wr_access = t.we_off;
+	t.adv_wr_off = t.we_off + max(t4_w, t8);
+	t.cs_wr_off = t.we_off + t4_w;
+	t.wr_cycle = t20 - t.we_on;
+
+	l = GPMC_CONFIG1_DEVICESIZE_16;
+	if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
+		l |= GPMC_CONFIG1_MUXADDDATA;
+	if (gpmc_cfg->flags & GPMC_READ_MON)
+		l |= GPMC_CONFIG1_WAIT_READ_MON;
+	if (gpmc_cfg->flags & GPMC_WRITE_MON)
+		l |= GPMC_CONFIG1_WAIT_WRITE_MON;
+	if (gpmc_cfg->wait_pin)
+		l |= GPMC_CONFIG1_WAIT_PIN_SEL(gpmc_cfg->wait_pin);
+	gpmc_cs_write_reg(gpmc_cfg->cs, GPMC_CS_CONFIG1, l);
+
+	/*
+	 * FIXME: Calculate the address and data bus muxed timings.
+	 * Note that at least adv_rd_off needs to be changed according
+	 * to omap3430 TRM Figure 11-11. Are the sdp boards using the
+	 * FPGA in between smc91x and omap as the timings are different
+	 * from above?
+	 */
+	if (gpmc_cfg->flags & GPMC_MUX_ADD_DATA)
+		return 0;
+
+	return gpmc_cs_set_timings(gpmc_cfg->cs, &t);
+}
+
+/*
+ * Initialize smc91x device connected to the GPMC. Note that we
+ * assume that pin multiplexing is done in the board-*.c file,
+ * or in the bootloader.
+ */
+void __init gpmc_smc91x_init(struct omap_smc91x_platform_data *board_data)
+{
+	unsigned long cs_mem_base;
+	int ret;
+
+	gpmc_cfg = board_data;
+
+	if (gpmc_cfg->flags & GPMC_TIMINGS_SMC91C96)
+		gpmc_cfg->retime = smc91c96_gpmc_retime;
+
+	if (gpmc_cs_request(gpmc_cfg->cs, SZ_16M, &cs_mem_base) < 0) {
+		printk(KERN_ERR "Failed to request GPMC mem for smc91x\n");
+		return;
+	}
+
+	gpmc_smc91x_resources[0].start = cs_mem_base + 0x300;
+	gpmc_smc91x_resources[0].end = cs_mem_base + 0x30f;
+	gpmc_smc91x_resources[1].flags |= (gpmc_cfg->flags & IRQF_TRIGGER_MASK);
+
+	if (gpmc_cfg->retime) {
+		ret = gpmc_cfg->retime();
+		if (ret != 0)
+			goto free1;
+	}
+
+	if (gpio_request(gpmc_cfg->gpio_irq, "SMC91X irq") < 0)
+		goto free1;
+
+	gpio_direction_input(gpmc_cfg->gpio_irq);
+	gpmc_smc91x_resources[1].start = gpio_to_irq(gpmc_cfg->gpio_irq);
+
+	if (gpmc_cfg->gpio_pwrdwn) {
+		ret = gpio_request(gpmc_cfg->gpio_pwrdwn, "SMC91X powerdown");
+		if (ret)
+			goto free2;
+		gpio_direction_output(gpmc_cfg->gpio_pwrdwn, 0);
+	}
+
+	if (gpmc_cfg->gpio_reset) {
+		ret = gpio_request(gpmc_cfg->gpio_reset, "SMC91X reset");
+		if (ret)
+			goto free3;
+
+		gpio_direction_output(gpmc_cfg->gpio_reset, 0);
+		gpio_set_value(gpmc_cfg->gpio_reset, 1);
+		msleep(100);
+		gpio_set_value(gpmc_cfg->gpio_reset, 0);
+	}
+
+	if (platform_device_register(&gpmc_smc91x_device) < 0) {
+		printk(KERN_ERR "Unable to register smc91x device\n");
+		gpio_free(gpmc_cfg->gpio_reset);
+		goto free3;
+	}
+
+	return;
+
+free3:
+	if (gpmc_cfg->gpio_pwrdwn)
+		gpio_free(gpmc_cfg->gpio_pwrdwn);
+free2:
+	gpio_free(gpmc_cfg->gpio_irq);
+free1:
+	gpmc_cs_free(gpmc_cfg->cs);
+
+	printk(KERN_ERR "Could not initialize smc91x\n");
+}
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 7fc8c04..06e9cbe 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -310,41 +310,62 @@ EXPORT_SYMBOL(omap_set_dma_transfer_params);
 
 void omap_set_dma_color_mode(int lch, enum omap_dma_color_mode mode, u32 color)
 {
-	u16 w;
-
 	BUG_ON(omap_dma_in_1510_mode());
 
-	if (cpu_class_is_omap2()) {
-		REVISIT_24XX();
-		return;
-	}
+	if (cpu_class_is_omap1()) {
+		u16 w;
 
-	w = dma_read(CCR2(lch));
-	w &= ~0x03;
+		w = dma_read(CCR2(lch));
+		w &= ~0x03;
 
-	switch (mode) {
-	case OMAP_DMA_CONSTANT_FILL:
-		w |= 0x01;
-		break;
-	case OMAP_DMA_TRANSPARENT_COPY:
-		w |= 0x02;
-		break;
-	case OMAP_DMA_COLOR_DIS:
-		break;
-	default:
-		BUG();
+		switch (mode) {
+		case OMAP_DMA_CONSTANT_FILL:
+			w |= 0x01;
+			break;
+		case OMAP_DMA_TRANSPARENT_COPY:
+			w |= 0x02;
+			break;
+		case OMAP_DMA_COLOR_DIS:
+			break;
+		default:
+			BUG();
+		}
+		dma_write(w, CCR2(lch));
+
+		w = dma_read(LCH_CTRL(lch));
+		w &= ~0x0f;
+		/* Default is channel type 2D */
+		if (mode) {
+			dma_write((u16)color, COLOR_L(lch));
+			dma_write((u16)(color >> 16), COLOR_U(lch));
+			w |= 1;		/* Channel type G */
+		}
+		dma_write(w, LCH_CTRL(lch));
 	}
-	dma_write(w, CCR2(lch));
 
-	w = dma_read(LCH_CTRL(lch));
-	w &= ~0x0f;
-	/* Default is channel type 2D */
-	if (mode) {
-		dma_write((u16)color, COLOR_L(lch));
-		dma_write((u16)(color >> 16), COLOR_U(lch));
-		w |= 1;		/* Channel type G */
+	if (cpu_class_is_omap2()) {
+		u32 val;
+
+		val = dma_read(CCR(lch));
+		val &= ~((1 << 17) | (1 << 16));
+
+		switch (mode) {
+		case OMAP_DMA_CONSTANT_FILL:
+			val |= 1 << 16;
+			break;
+		case OMAP_DMA_TRANSPARENT_COPY:
+			val |= 1 << 17;
+			break;
+		case OMAP_DMA_COLOR_DIS:
+			break;
+		default:
+			BUG();
+		}
+		dma_write(val, CCR(lch));
+
+		color &= 0xffffff;
+		dma_write(color, COLOR(lch));
 	}
-	dma_write(w, LCH_CTRL(lch));
 }
 EXPORT_SYMBOL(omap_set_dma_color_mode);
 
@@ -1199,7 +1220,7 @@ static void create_dma_lch_chain(int lch_head, int lch_queue)
  * 	     Failure: -EINVAL/-ENOMEM
  */
 int omap_request_dma_chain(int dev_id, const char *dev_name,
-			   void (*callback) (int chain_id, u16 ch_status,
+			   void (*callback) (int lch, u16 ch_status,
 					     void *data),
 			   int *chain_id, int no_of_chans, int chain_mode,
 			   struct omap_dma_channel_params params)
diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c
index a303071..8b84839 100644
--- a/arch/arm/plat-omap/i2c.c
+++ b/arch/arm/plat-omap/i2c.c
@@ -5,7 +5,7 @@
  *
  * Copyright (C) 2007 Nokia Corporation.
  *
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
+ * Contact: Jarkko Nikula <jhnikula@gmail.com>
  *
  * This program is free software; you can redistribute it and/or
  * modify it under the terms of the GNU General Public License
diff --git a/arch/arm/plat-omap/include/mach/dma.h b/arch/arm/plat-omap/include/mach/dma.h
index 54fe966..19df76f 100644
--- a/arch/arm/plat-omap/include/mach/dma.h
+++ b/arch/arm/plat-omap/include/mach/dma.h
@@ -144,6 +144,7 @@
 #define OMAP_DMA4_CSSA_U(n)		0
 #define OMAP_DMA4_CDSA_L(n)		0
 #define OMAP_DMA4_CDSA_U(n)		0
+#define OMAP1_DMA_COLOR(n)		0
 
 /*----------------------------------------------------------------------------*/
 
@@ -531,7 +532,7 @@ extern int omap_get_dma_index(int lch, int *ei, int *fi);
 /* Chaining APIs */
 #ifndef CONFIG_ARCH_OMAP1
 extern int omap_request_dma_chain(int dev_id, const char *dev_name,
-				  void (*callback) (int chain_id, u16 ch_status,
+				  void (*callback) (int lch, u16 ch_status,
 						    void *data),
 				  int *chain_id, int no_of_chans,
 				  int chain_mode,
diff --git a/arch/arm/plat-omap/include/mach/gpmc-smc91x.h b/arch/arm/plat-omap/include/mach/gpmc-smc91x.h
new file mode 100644
index 0000000..b64fbee
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/gpmc-smc91x.h
@@ -0,0 +1,42 @@
+/*
+ * arch/arm/plat-omap/include/mach/gpmc-smc91x.h
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ASM_ARCH_OMAP_GPMC_SMC91X_H__
+
+#define GPMC_TIMINGS_SMC91C96	(1 << 4)
+#define GPMC_MUX_ADD_DATA	(1 << 5) /* GPMC_CONFIG1_MUXADDDATA */
+#define GPMC_READ_MON		(1 << 6) /* GPMC_CONFIG1_WAIT_READ_MON */
+#define GPMC_WRITE_MON		(1 << 7) /* GPMC_CONFIG1_WAIT_WRITE_MON */
+
+struct omap_smc91x_platform_data {
+	int	cs;
+	int	gpio_irq;
+	int	gpio_pwrdwn;
+	int	gpio_reset;
+	int	wait_pin;	/* Optional GPMC_CONFIG1_WAITPINSELECT */
+	u32	flags;
+	int	(*retime)(void);
+};
+
+#if defined(CONFIG_SMC91X) || \
+	defined(CONFIG_SMC91X_MODULE)
+
+extern void gpmc_smc91x_init(struct omap_smc91x_platform_data *d);
+
+#else
+
+#define board_smc91x_data	NULL
+
+static inline void gpmc_smc91x_init(struct omap_smc91x_platform_data *d)
+{
+}
+
+#endif
+#endif
diff --git a/arch/arm/plat-omap/include/mach/hwa742.h b/arch/arm/plat-omap/include/mach/hwa742.h
index 577f492..886248d 100644
--- a/arch/arm/plat-omap/include/mach/hwa742.h
+++ b/arch/arm/plat-omap/include/mach/hwa742.h
@@ -2,10 +2,6 @@
 #define _HWA742_H
 
 struct hwa742_platform_data {
-	void		(*power_up)(struct device *dev);
-	void		(*power_down)(struct device *dev);
-	unsigned long	(*get_clock_rate)(struct device *dev);
-
 	unsigned	te_connected:1;
 };
 
diff --git a/arch/arm/plat-omap/include/mach/onenand.h b/arch/arm/plat-omap/include/mach/onenand.h
index 4649d30..72f433d 100644
--- a/arch/arm/plat-omap/include/mach/onenand.h
+++ b/arch/arm/plat-omap/include/mach/onenand.h
@@ -9,8 +9,12 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/mtd/mtd.h>
 #include <linux/mtd/partitions.h>
 
+#define ONENAND_SYNC_READ	(1 << 0)
+#define ONENAND_SYNC_READWRITE	(1 << 1)
+
 struct omap_onenand_platform_data {
 	int			cs;
 	int			gpio_irq;
@@ -18,8 +22,22 @@ struct omap_onenand_platform_data {
 	int			nr_parts;
 	int                     (*onenand_setup)(void __iomem *, int freq);
 	int			dma_channel;
+	u8			flags;
 };
 
-int omap2_onenand_rephase(void);
-
 #define ONENAND_MAX_PARTITIONS 8
+
+#if defined(CONFIG_MTD_ONENAND_OMAP2) || \
+	defined(CONFIG_MTD_ONENAND_OMAP2_MODULE)
+
+extern void gpmc_onenand_init(struct omap_onenand_platform_data *d);
+
+#else
+
+#define board_onenand_data	NULL
+
+static inline void gpmc_onenand_init(struct omap_onenand_platform_data *d)
+{
+}
+
+#endif
diff --git a/arch/arm/plat-omap/include/mach/vmalloc.h b/arch/arm/plat-omap/include/mach/vmalloc.h
index dc104cd..b97dfaf 100644
--- a/arch/arm/plat-omap/include/mach/vmalloc.h
+++ b/arch/arm/plat-omap/include/mach/vmalloc.h
@@ -17,5 +17,5 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
  */
-#define VMALLOC_END	  (PAGE_OFFSET + 0x10000000)
+#define VMALLOC_END	  (PAGE_OFFSET + 0x18000000)
 
diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c
index 28b0a82..efa0e01 100644
--- a/arch/arm/plat-omap/mcbsp.c
+++ b/arch/arm/plat-omap/mcbsp.c
@@ -91,11 +91,20 @@ static void omap_mcbsp_dump_reg(u8 id)
 static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
 {
 	struct omap_mcbsp *mcbsp_tx = dev_id;
+	u16 irqst_spcr2;
 
-	dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n",
-		OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2));
+	irqst_spcr2 = OMAP_MCBSP_READ(mcbsp_tx->io_base, SPCR2);
+	dev_dbg(mcbsp_tx->dev, "TX IRQ callback : 0x%x\n", irqst_spcr2);
 
-	complete(&mcbsp_tx->tx_irq_completion);
+	if (irqst_spcr2 & XSYNC_ERR) {
+		dev_err(mcbsp_tx->dev, "TX Frame Sync Error! : 0x%x\n",
+			irqst_spcr2);
+		/* Writing zero to XSYNC_ERR clears the IRQ */
+		OMAP_MCBSP_WRITE(mcbsp_tx->io_base, SPCR2,
+			irqst_spcr2 & ~(XSYNC_ERR));
+	} else {
+		complete(&mcbsp_tx->tx_irq_completion);
+	}
 
 	return IRQ_HANDLED;
 }
@@ -103,11 +112,20 @@ static irqreturn_t omap_mcbsp_tx_irq_handler(int irq, void *dev_id)
 static irqreturn_t omap_mcbsp_rx_irq_handler(int irq, void *dev_id)
 {
 	struct omap_mcbsp *mcbsp_rx = dev_id;
+	u16 irqst_spcr1;
 
-	dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n",
-		OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR2));
+	irqst_spcr1 = OMAP_MCBSP_READ(mcbsp_rx->io_base, SPCR1);
+	dev_dbg(mcbsp_rx->dev, "RX IRQ callback : 0x%x\n", irqst_spcr1);
 
-	complete(&mcbsp_rx->rx_irq_completion);
+	if (irqst_spcr1 & RSYNC_ERR) {
+		dev_err(mcbsp_rx->dev, "RX Frame Sync Error! : 0x%x\n",
+			irqst_spcr1);
+		/* Writing zero to RSYNC_ERR clears the IRQ */
+		OMAP_MCBSP_WRITE(mcbsp_rx->io_base, SPCR1,
+			irqst_spcr1 & ~(RSYNC_ERR));
+	} else {
+		complete(&mcbsp_rx->tx_irq_completion);
+	}
 
 	return IRQ_HANDLED;
 }
diff --git a/arch/arm/plat-omap/sram.c b/arch/arm/plat-omap/sram.c
index 4f0145d..bd44d1a 100644
--- a/arch/arm/plat-omap/sram.c
+++ b/arch/arm/plat-omap/sram.c
@@ -38,8 +38,8 @@
 #define OMAP1_SRAM_VA		VMALLOC_END
 #define OMAP2_SRAM_PA		0x40200000
 #define OMAP2_SRAM_PUB_PA	0x4020f800
-#define OMAP2_SRAM_VA		VMALLOC_END
-#define OMAP2_SRAM_PUB_VA	(VMALLOC_END + 0x800)
+#define OMAP2_SRAM_VA		0xe3000000
+#define OMAP2_SRAM_PUB_VA	(OMAP2_SRAM_VA + 0x800)
 #define OMAP3_SRAM_PA           0x40200000
 #define OMAP3_SRAM_VA           0xd7000000
 #define OMAP3_SRAM_PUB_PA       0x40208000
diff --git a/drivers/video/omap/hwa742.c b/drivers/video/omap/hwa742.c
index 8aa6e47..5d4f348 100644
--- a/drivers/video/omap/hwa742.c
+++ b/drivers/video/omap/hwa742.c
@@ -133,8 +133,7 @@ struct {
 	struct lcd_ctrl_extif	*extif;
 	struct lcd_ctrl		*int_ctrl;
 
-	void			(*power_up)(struct device *dev);
-	void			(*power_down)(struct device *dev);
+	struct clk		*sys_ck;
 } hwa742;
 
 struct lcd_ctrl hwa742_ctrl;
@@ -915,14 +914,13 @@ static void hwa742_suspend(void)
 	hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED);
 	/* Enable sleep mode */
 	hwa742_write_reg(HWA742_POWER_SAVE, 1 << 1);
-	if (hwa742.power_down != NULL)
-		hwa742.power_down(hwa742.fbdev->dev);
+	clk_disable(hwa742.sys_ck);
 }
 
 static void hwa742_resume(void)
 {
-	if (hwa742.power_up != NULL)
-		hwa742.power_up(hwa742.fbdev->dev);
+	clk_enable(hwa742.sys_ck);
+
 	/* Disable sleep mode */
 	hwa742_write_reg(HWA742_POWER_SAVE, 0);
 	while (1) {
@@ -955,14 +953,13 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
 	omapfb_conf = fbdev->dev->platform_data;
 	ctrl_conf = omapfb_conf->ctrl_platform_data;
 
-	if (ctrl_conf == NULL || ctrl_conf->get_clock_rate == NULL) {
+	if (ctrl_conf == NULL) {
 		dev_err(fbdev->dev, "HWA742: missing platform data\n");
 		r = -ENOENT;
 		goto err1;
 	}
 
-	hwa742.power_down = ctrl_conf->power_down;
-	hwa742.power_up = ctrl_conf->power_up;
+	hwa742.sys_ck = clk_get(NULL, "hwa_sys_ck");
 
 	spin_lock_init(&hwa742.req_lock);
 
@@ -972,12 +969,11 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
 	if ((r = hwa742.extif->init(fbdev)) < 0)
 		goto err2;
 
-	ext_clk = ctrl_conf->get_clock_rate(fbdev->dev);
+	ext_clk = clk_get_rate(hwa742.sys_ck);
 	if ((r = calc_extif_timings(ext_clk, &extif_mem_div)) < 0)
 		goto err3;
 	hwa742.extif->set_timings(&hwa742.reg_timings);
-	if (hwa742.power_up != NULL)
-		hwa742.power_up(fbdev->dev);
+	clk_enable(hwa742.sys_ck);
 
 	calc_hwa742_clk_rates(ext_clk, &sys_clk, &pix_clk);
 	if ((r = calc_extif_timings(sys_clk, &extif_mem_div)) < 0)
@@ -1040,8 +1036,7 @@ static int hwa742_init(struct omapfb_device *fbdev, int ext_mode,
 
 	return 0;
 err4:
-	if (hwa742.power_down != NULL)
-		hwa742.power_down(fbdev->dev);
+	clk_disable(hwa742.sys_ck);
 err3:
 	hwa742.extif->cleanup();
 err2:
@@ -1055,8 +1050,7 @@ static void hwa742_cleanup(void)
 	hwa742_set_update_mode(OMAPFB_UPDATE_DISABLED);
 	hwa742.extif->cleanup();
 	hwa742.int_ctrl->cleanup();
-	if (hwa742.power_down != NULL)
-		hwa742.power_down(hwa742.fbdev->dev);
+	clk_disable(hwa742.sys_ck);
 }
 
 struct lcd_ctrl hwa742_ctrl = {