Merge branch 'arc_emac-next'

Caesar Wang says:

====================
arc_emac: fixes the emac issues and cleanup emac drivers

This series patches are based on kernel 4.5-rc7+ version.
Linux version 4.5.0-rc7-next-20160311+ (wxt@nb) (...) #45 SMP Sun Mar 13 16:17:56

The history patch in here:
Patch-v1: https://lkml.org/lkml/2016/3/11/209
Patch-v2: https://lkml.org/lkml/2016/3/13/39

Verified on kylin board with my github.
https://github.com/Caesar-github/rockchip/tree/kylin/next

That's verified on kylin board with ubuntu os.

This series patches are built all pass with Mr.robot on
https://github.com/Caesar-github/linux/tree/build-emac-v3

How to test and verify?

You can refer to the following wiki document.
http://rockchip.wikidot.com/linux-develop-guide

bootup log:
[    1.264740] rockchip_emac 10200000.ethernet: no regulator found
[    1.270908] rockchip_emac 10200000.ethernet: ARC EMAC detected with id: 0x7fd02
[    1.278362] rockchip_emac 10200000.ethernet: IRQ is 29
[    1.283747] rockchip_emac 10200000.ethernet: MAC address is now 06:5d:61:c7:39:41
[    1.291314] rockchip_emac 10200000.ethernet: GPIO lookup for consumer phy-reset
[    1.291333] rockchip_emac 10200000.ethernet: using device tree for GPIO lookup
[    1.663155] rockchip_emac 10200000.ethernet: connected to Generic PHY phy with id 0xffffc816
[    8.863448] rockchip_emac 10200000.ethernet eth0: Link is Up - 100Mbps/Full - flow control off

root@localhost:/# busybox ping www.baidu.com
PING www.baidu.com (14.215.177.38): 56 data bytes
64 bytes from 14.215.177.38: seq=0 ttl=48 time=35.046 ms
64 bytes from 14.215.177.38: seq=1 ttl=48 time=35.095 ms
64 bytes from 14.215.177.38: seq=2 ttl=48 time=34.203 ms
64 bytes from 14.215.177.38: seq=3 ttl=48 time=38.516 ms
...
---

1) This series has 6 patches: (1--->9)
net: arc_emac: make the rockchip emac document more compatible
net: arc_emac: add phy reset is optional for device tree
net: arc_emac: support the phy reset for emac driver
net: arc: trivial: cleanup the emac driver
clk: rockchip: add node-id for rk3036 emac hclk
clk: rockchip: associate the rk3036 HCLK_EMAC clock-id
clk: rockchip: add clock-id for rk3036 emac pll source clock
clk: rockchip: associate SCLK_MAC_PLL and disable reparenting on rk3036
ARM: dts: rockchip: add support emac for RK3036

2) This series patches have the following descriptions:

Hi Rob, David:
PATCH[1/9-2/9]: ====>
net: arc_emac: make the rockchip emac document more compatible
net: arc_emac: add phy reset is optional for device tree

The patches change the rockchip emac document for more compatible and
Add the phy reset property for document.
---

Hi David
PATCH[3/9]: ====>
net: arc_emac: support the phy reset for emac driver

The emac didn't work on kylin board since in some case the clocks parent changed.
The kylin hardware connects the phy reset pin, we should use it with real world.
As the previous patch discuss on https://patchwork.kernel.org/patch/8186801/

And as sergei/Heiko suggestions on
https://patchwork.kernel.org/patch/8564571/
---

Hi David
PATCH[4/9]: ====>
net: arc: trivial: cleanup the emac driver

The first time to look the emac drivers, I think that have to cleanup the drivers with scripts.
Although it's the trivial things, in order to be more read.
---

Hi Heiko,Michael,Stephen:
PATCH[5/9-8/9]: ====> clk: rockchip: rk3036: fix and add node id for emac clock

Four-part from https://patchwork.kernel.org/patch/8564581/
clk: rockchip: add node-id for rk3036 emac hclk
clk: rockchip: associate the rk3036 HCLK_EMAC clock-id
clk: rockchip: add clock-id for rk3036 emac pll source clock
clk: rockchip: associate SCLK_MAC_PLL and disable reparenting on rk3036

Add the emac needed clocks for rk3036 SoCs
---

Hi Heiko:
PATCH[9/9]: ====>
ARM: dts: rockchip: add support emac for RK3036

Add the emac needed main info for rk3036 dts.
---

Thanks your reviewing! :)

Changes in v3:
- %s/he/the
- Add the Cc people
- As Sergei comments, the original name is better, so
  %s/reset-gpios/phy-reset-gpios
- Add the Cc people.
- Caused the build error since the missing include head file.
- %s/reset/phy-reset to match the device tree.
- Add the Cc people
- Add the Cc people.
- Add the Cc people.
- Add the Cc people.
- Add the Cc people.
- Add the Cc people.
- rename reset-gpio to phy-reset-gpios.
- change the commit.
- remove the pcfg_output_high, that's really not needed for emac.
- Add the Cc people.
- Fixes the 'zhengxing' to 'Xing Zheng'.

Changes in v2:
- change the commit and remove the repeat the name 'rockchip'.
- %s/phy-reset-gpios/reset-gpios
- As the pervious version, Sergei and Heiko comments on
  https://patchwork.kernel.org/patch/8564571/.
- Nevermind, add signed-off since Heiko the original patch,
  refer the Heiko's test patch on
  https://github.com/mmind/linux-rockchip/commit/a943c588783438ff1c508dfa8c79f1709aa5775e
  :)
- As the robot notice the build error since overflow in implicit
  constant conversion.
- rename phy-reset-gpio to reset-gpios.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

11 files changed, 201 insertions, 62 deletions

diff --git a/Documentation/devicetree/bindings/net/arc_emac.txt b/Documentation/devicetree/bindings/net/arc_emac.txt
index a1d71eb..c73a0e9 100644
--- a/Documentation/devicetree/bindings/net/arc_emac.txt
+++ b/Documentation/devicetree/bindings/net/arc_emac.txt
@@ -7,6 +7,13 @@ Required properties:
 - max-speed: see ethernet.txt file in the same directory.
 - phy: see ethernet.txt file in the same directory.
 
+Optional properties:
+- phy-reset-gpios : Should specify the gpio for phy reset
+- phy-reset-duration : Reset duration in milliseconds.  Should present
+  only if property "phy-reset-gpios" is available.  Missing the property
+  will have the duration be 1 millisecond.  Numbers greater than 1000 are
+  invalid and 1 millisecond will be used instead.
+
 Clock handling:
 The clock frequency is needed to calculate and set polling period of EMAC.
 It must be provided by one of:
diff --git a/Documentation/devicetree/bindings/net/emac_rockchip.txt b/Documentation/devicetree/bindings/net/emac_rockchip.txt
index 8dc1c79..05bd7da 100644
--- a/Documentation/devicetree/bindings/net/emac_rockchip.txt
+++ b/Documentation/devicetree/bindings/net/emac_rockchip.txt
@@ -1,8 +1,10 @@
-* ARC EMAC 10/100 Ethernet platform driver for Rockchip Rk3066/RK3188 SoCs
+* ARC EMAC 10/100 Ethernet platform driver for Rockchip RK3036/RK3066/RK3188 SoCs
 
 Required properties:
-- compatible: Should be "rockchip,rk3066-emac" or "rockchip,rk3188-emac"
-  according to the target SoC.
+- compatible: should be "rockchip,<name>-emac"
+   "rockchip,rk3036-emac": found on RK3036 SoCs
+   "rockchip,rk3066-emac": found on RK3066 SoCs
+   "rockchip,rk3188-emac": found on RK3188 SoCs
 - reg: Address and length of the register set for the device
 - interrupts: Should contain the EMAC interrupts
 - rockchip,grf: phandle to the syscon grf used to control speed and mode
diff --git a/arch/arm/boot/dts/rk3036-evb.dts b/arch/arm/boot/dts/rk3036-evb.dts
index 28a0336..b3d6ec8 100644
--- a/arch/arm/boot/dts/rk3036-evb.dts
+++ b/arch/arm/boot/dts/rk3036-evb.dts
@@ -47,6 +47,20 @@
 	compatible = "rockchip,rk3036-evb", "rockchip,rk3036";
 };
 
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
+	phy = <&phy0>;
+	phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */
+	phy-reset-duration = <10>; /* millisecond */
+
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
 &i2c1 {
 	status = "okay";
 
diff --git a/arch/arm/boot/dts/rk3036-kylin.dts b/arch/arm/boot/dts/rk3036-kylin.dts
index 992f9ca..6b4ffc3 100644
--- a/arch/arm/boot/dts/rk3036-kylin.dts
+++ b/arch/arm/boot/dts/rk3036-kylin.dts
@@ -60,6 +60,20 @@
 	status = "okay";
 };
 
+&emac {
+	pinctrl-names = "default";
+	pinctrl-0 = <&emac_xfer>, <&emac_mdio>;
+	phy = <&phy0>;
+	phy-reset-gpios = <&gpio2 22 GPIO_ACTIVE_LOW>; /* PHY_RST */
+	phy-reset-duration = <10>; /* millisecond */
+
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		reg = <0>;
+	};
+};
+
 &emmc {
 	status = "okay";
 };
diff --git a/arch/arm/boot/dts/rk3036.dtsi b/arch/arm/boot/dts/rk3036.dtsi
index b9567c1..609319c 100644
--- a/arch/arm/boot/dts/rk3036.dtsi
+++ b/arch/arm/boot/dts/rk3036.dtsi
@@ -186,6 +186,27 @@
 		status = "disabled";
 	};
 
+	emac: ethernet@10200000 {
+		compatible = "rockchip,rk3036-emac", "snps,arc-emac";
+		reg = <0x10200000 0x4000>;
+		interrupts = <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		rockchip,grf = <&grf>;
+		clocks = <&cru HCLK_MAC>, <&cru SCLK_MACREF>, <&cru SCLK_MAC>;
+		clock-names = "hclk", "macref", "macclk";
+		/*
+		 * Fix the emac parent clock is DPLL instead of APLL.
+		 * since that will cause some unstable things if the cpufreq
+		 * is working. (e.g: the accurate 50MHz what mac_ref need)
+		 */
+		assigned-clocks = <&cru SCLK_MACPLL>;
+		assigned-clock-parents = <&cru PLL_DPLL>;
+		max-speed = <100>;
+		phy-mode = "rmii";
+		status = "disabled";
+	};
+
 	sdmmc: dwmmc@10214000 {
 		compatible = "rockchip,rk3036-dw-mshc", "rockchip,rk3288-dw-mshc";
 		reg = <0x10214000 0x4000>;
@@ -556,6 +577,24 @@
 			};
 		};
 
+		emac {
+			emac_xfer: emac-xfer {
+				rockchip,pins = <2 10 RK_FUNC_1 &pcfg_pull_default>, /* crs_dvalid */
+						<2 13 RK_FUNC_1 &pcfg_pull_default>, /* tx_en */
+						<2 14 RK_FUNC_1 &pcfg_pull_default>, /* mac_clk */
+						<2 15 RK_FUNC_1 &pcfg_pull_default>, /* rx_err */
+						<2 16 RK_FUNC_1 &pcfg_pull_default>, /* rxd1 */
+						<2 17 RK_FUNC_1 &pcfg_pull_default>, /* rxd0 */
+						<2 18 RK_FUNC_1 &pcfg_pull_default>, /* txd1 */
+						<2 19 RK_FUNC_1 &pcfg_pull_default>; /* txd0 */
+			};
+
+			emac_mdio: emac-mdio {
+				rockchip,pins = <2 12 RK_FUNC_1 &pcfg_pull_default>, /* mac_md */
+						<2 25 RK_FUNC_1 &pcfg_pull_default>; /* mac_mdclk */
+			};
+		};
+
 		i2c0 {
 			i2c0_xfer: i2c0-xfer {
 				rockchip,pins = <0 0 RK_FUNC_1 &pcfg_pull_none>,
diff --git a/drivers/clk/rockchip/clk-rk3036.c b/drivers/clk/rockchip/clk-rk3036.c
index bc7fbac..53e9c39 100644
--- a/drivers/clk/rockchip/clk-rk3036.c
+++ b/drivers/clk/rockchip/clk-rk3036.c
@@ -343,7 +343,7 @@ static struct rockchip_clk_branch rk3036_clk_branches[] __initdata = {
 			RK2928_CLKSEL_CON(16), 0, 2, MFLAGS, 2, 5, DFLAGS,
 			RK2928_CLKGATE_CON(10), 5, GFLAGS),
 
-	COMPOSITE_NOGATE(0, "mac_pll_src", mux_pll_src_3plls_p, 0,
+	COMPOSITE_NOGATE(SCLK_MACPLL, "mac_pll_src", mux_pll_src_3plls_p, CLK_SET_RATE_NO_REPARENT,
 			RK2928_CLKSEL_CON(21), 0, 2, MFLAGS, 9, 5, DFLAGS),
 	MUX(SCLK_MACREF, "mac_clk_ref", mux_mac_p, CLK_SET_RATE_PARENT,
 			RK2928_CLKSEL_CON(21), 3, 1, MFLAGS),
@@ -404,7 +404,7 @@ static struct rockchip_clk_branch rk3036_clk_branches[] __initdata = {
 	GATE(HCLK_OTG1, "hclk_otg1", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(7), 3, GFLAGS),
 	GATE(HCLK_I2S, "hclk_i2s", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 2, GFLAGS),
 	GATE(0, "hclk_sfc", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 14, GFLAGS),
-	GATE(0, "hclk_mac", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(3), 15, GFLAGS),
+	GATE(HCLK_MAC, "hclk_mac", "hclk_peri", 0, RK2928_CLKGATE_CON(3), 5, GFLAGS),
 
 	/* pclk_peri gates */
 	GATE(0, "pclk_peri_matrix", "pclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(4), 1, GFLAGS),
diff --git a/drivers/net/ethernet/arc/emac.h b/drivers/net/ethernet/arc/emac.h
index dae1ac3..ca562bc 100644
--- a/drivers/net/ethernet/arc/emac.h
+++ b/drivers/net/ethernet/arc/emac.h
@@ -14,36 +14,36 @@
 #include <linux/clk.h>
 
 /* STATUS and ENABLE Register bit masks */
-#define TXINT_MASK	(1<<0)	/* Transmit interrupt */
-#define RXINT_MASK	(1<<1)	/* Receive interrupt */
-#define ERR_MASK	(1<<2)	/* Error interrupt */
-#define TXCH_MASK	(1<<3)	/* Transmit chaining error interrupt */
-#define MSER_MASK	(1<<4)	/* Missed packet counter error */
-#define RXCR_MASK	(1<<8)	/* RXCRCERR counter rolled over  */
-#define RXFR_MASK	(1<<9)	/* RXFRAMEERR counter rolled over */
-#define RXFL_MASK	(1<<10)	/* RXOFLOWERR counter rolled over */
-#define MDIO_MASK	(1<<12)	/* MDIO complete interrupt */
-#define TXPL_MASK	(1<<31)	/* Force polling of BD by EMAC */
+#define TXINT_MASK	(1 << 0)	/* Transmit interrupt */
+#define RXINT_MASK	(1 << 1)	/* Receive interrupt */
+#define ERR_MASK	(1 << 2)	/* Error interrupt */
+#define TXCH_MASK	(1 << 3)	/* Transmit chaining error interrupt */
+#define MSER_MASK	(1 << 4)	/* Missed packet counter error */
+#define RXCR_MASK	(1 << 8)	/* RXCRCERR counter rolled over  */
+#define RXFR_MASK	(1 << 9)	/* RXFRAMEERR counter rolled over */
+#define RXFL_MASK	(1 << 10)	/* RXOFLOWERR counter rolled over */
+#define MDIO_MASK	(1 << 12)	/* MDIO complete interrupt */
+#define TXPL_MASK	(1 << 31)	/* Force polling of BD by EMAC */
 
 /* CONTROL Register bit masks */
-#define EN_MASK		(1<<0)	/* VMAC enable */
-#define TXRN_MASK	(1<<3)	/* TX enable */
-#define RXRN_MASK	(1<<4)	/* RX enable */
-#define DSBC_MASK	(1<<8)	/* Disable receive broadcast */
-#define ENFL_MASK	(1<<10)	/* Enable Full-duplex */
-#define PROM_MASK	(1<<11)	/* Promiscuous mode */
+#define EN_MASK		(1 << 0)	/* VMAC enable */
+#define TXRN_MASK	(1 << 3)	/* TX enable */
+#define RXRN_MASK	(1 << 4)	/* RX enable */
+#define DSBC_MASK	(1 << 8)	/* Disable receive broadcast */
+#define ENFL_MASK	(1 << 10)	/* Enable Full-duplex */
+#define PROM_MASK	(1 << 11)	/* Promiscuous mode */
 
 /* Buffer descriptor INFO bit masks */
-#define OWN_MASK	(1<<31)	/* 0-CPU owns buffer, 1-EMAC owns buffer */
-#define FIRST_MASK	(1<<16)	/* First buffer in chain */
-#define LAST_MASK	(1<<17)	/* Last buffer in chain */
+#define OWN_MASK	(1 << 31)	/* 0-CPU or 1-EMAC owns buffer */
+#define FIRST_MASK	(1 << 16)	/* First buffer in chain */
+#define LAST_MASK	(1 << 17)	/* Last buffer in chain */
 #define LEN_MASK	0x000007FF	/* last 11 bits */
-#define CRLS		(1<<21)
-#define DEFR		(1<<22)
-#define DROP		(1<<23)
-#define RTRY		(1<<24)
-#define LTCL		(1<<28)
-#define UFLO		(1<<29)
+#define CRLS		(1 << 21)
+#define DEFR		(1 << 22)
+#define DROP		(1 << 23)
+#define RTRY		(1 << 24)
+#define LTCL		(1 << 28)
+#define UFLO		(1 << 29)
 
 #define FOR_EMAC	OWN_MASK
 #define FOR_CPU		0
@@ -66,7 +66,7 @@ enum {
 	R_MDIO,
 };
 
-#define TX_TIMEOUT		(400*HZ/1000)	/* Transmission timeout */
+#define TX_TIMEOUT		(400 * HZ / 1000) /* Transmission timeout */
 
 #define ARC_EMAC_NAPI_WEIGHT	40		/* Workload for NAPI */
 
@@ -102,6 +102,11 @@ struct buffer_state {
 	DEFINE_DMA_UNMAP_LEN(len);
 };
 
+struct arc_emac_mdio_bus_data {
+	struct gpio_desc *reset_gpio;
+	int msec;
+};
+
 /**
  * struct arc_emac_priv - Storage of EMAC's private information.
  * @dev:	Pointer to the current device.
@@ -131,6 +136,7 @@ struct arc_emac_priv {
 	struct device *dev;
 	struct phy_device *phy_dev;
 	struct mii_bus *bus;
+	struct arc_emac_mdio_bus_data bus_data;
 
 	void __iomem *regs;
 	struct clk *clk;
@@ -190,6 +196,7 @@ static inline unsigned int arc_reg_get(struct arc_emac_priv *priv, int reg)
 static inline void arc_reg_or(struct arc_emac_priv *priv, int reg, int mask)
 {
 	unsigned int value = arc_reg_get(priv, reg);
+
 	arc_reg_set(priv, reg, value | mask);
 }
 
@@ -205,6 +212,7 @@ static inline void arc_reg_or(struct arc_emac_priv *priv, int reg, int mask)
 static inline void arc_reg_clr(struct arc_emac_priv *priv, int reg, int mask)
 {
 	unsigned int value = arc_reg_get(priv, reg);
+
 	arc_reg_set(priv, reg, value & ~mask);
 }
 
diff --git a/drivers/net/ethernet/arc/emac_main.c b/drivers/net/ethernet/arc/emac_main.c
index 6446af1..a3a9392 100644
--- a/drivers/net/ethernet/arc/emac_main.c
+++ b/drivers/net/ethernet/arc/emac_main.c
@@ -26,7 +26,6 @@
 
 #include "emac.h"
 
-
 /**
  * arc_emac_tx_avail - Return the number of available slots in the tx ring.
  * @priv: Pointer to ARC EMAC private data structure.
@@ -66,7 +65,7 @@ static void arc_emac_adjust_link(struct net_device *ndev)
 	if (priv->duplex != phy_dev->duplex) {
 		reg = arc_reg_get(priv, R_CTRL);
 
-		if (DUPLEX_FULL == phy_dev->duplex)
+		if (phy_dev->duplex == DUPLEX_FULL)
 			reg |= ENFL_MASK;
 		else
 			reg &= ~ENFL_MASK;
@@ -466,9 +465,9 @@ static int arc_emac_open(struct net_device *ndev)
 
 	/* Set CONTROL */
 	arc_reg_set(priv, R_CTRL,
-		     (RX_BD_NUM << 24) |	/* RX BD table length */
-		     (TX_BD_NUM << 16) |	/* TX BD table length */
-		     TXRN_MASK | RXRN_MASK);
+		    (RX_BD_NUM << 24) |	/* RX BD table length */
+		    (TX_BD_NUM << 16) |	/* TX BD table length */
+		    TXRN_MASK | RXRN_MASK);
 
 	napi_enable(&priv->napi);
 
@@ -533,8 +532,10 @@ static void arc_free_tx_queue(struct net_device *ndev)
 		struct buffer_state *tx_buff = &priv->tx_buff[i];
 
 		if (tx_buff->skb) {
-			dma_unmap_single(&ndev->dev, dma_unmap_addr(tx_buff, addr),
-					 dma_unmap_len(tx_buff, len), DMA_TO_DEVICE);
+			dma_unmap_single(&ndev->dev,
+					 dma_unmap_addr(tx_buff, addr),
+					 dma_unmap_len(tx_buff, len),
+					 DMA_TO_DEVICE);
 
 			/* return the sk_buff to system */
 			dev_kfree_skb_irq(tx_buff->skb);
@@ -562,8 +563,10 @@ static void arc_free_rx_queue(struct net_device *ndev)
 		struct buffer_state *rx_buff = &priv->rx_buff[i];
 
 		if (rx_buff->skb) {
-			dma_unmap_single(&ndev->dev, dma_unmap_addr(rx_buff, addr),
-					dma_unmap_len(rx_buff, len), DMA_FROM_DEVICE);
+			dma_unmap_single(&ndev->dev,
+					 dma_unmap_addr(rx_buff, addr),
+					 dma_unmap_len(rx_buff, len),
+					 DMA_FROM_DEVICE);
 
 			/* return the sk_buff to system */
 			dev_kfree_skb_irq(rx_buff->skb);
@@ -717,8 +720,8 @@ static void arc_emac_set_address_internal(struct net_device *ndev)
 	struct arc_emac_priv *priv = netdev_priv(ndev);
 	unsigned int addr_low, addr_hi;
 
-	addr_low = le32_to_cpu(*(__le32 *) &ndev->dev_addr[0]);
-	addr_hi = le16_to_cpu(*(__le16 *) &ndev->dev_addr[4]);
+	addr_low = le32_to_cpu(*(__le32 *)&ndev->dev_addr[0]);
+	addr_hi = le16_to_cpu(*(__le16 *)&ndev->dev_addr[4]);
 
 	arc_reg_set(priv, R_ADDRL, addr_low);
 	arc_reg_set(priv, R_ADDRH, addr_hi);
@@ -774,7 +777,6 @@ int arc_emac_probe(struct net_device *ndev, int interface)
 	unsigned int id, clock_frequency, irq;
 	int err;
 
-
 	/* Get PHY from device tree */
 	phy_node = of_parse_phandle(dev->of_node, "phy", 0);
 	if (!phy_node) {
@@ -796,7 +798,6 @@ int arc_emac_probe(struct net_device *ndev, int interface)
 		return -ENODEV;
 	}
 
-
 	ndev->netdev_ops = &arc_emac_netdev_ops;
 	ndev->ethtool_ops = &arc_emac_ethtool_ops;
 	ndev->watchdog_timeo = TX_TIMEOUT;
@@ -807,9 +808,9 @@ int arc_emac_probe(struct net_device *ndev, int interface)
 	priv->dev = dev;
 
 	priv->regs = devm_ioremap_resource(dev, &res_regs);
-	if (IS_ERR(priv->regs)) {
+	if (IS_ERR(priv->regs))
 		return PTR_ERR(priv->regs);
-	}
+
 	dev_dbg(dev, "Registers base address is 0x%p\n", priv->regs);
 
 	if (priv->clk) {
@@ -930,10 +931,8 @@ int arc_emac_remove(struct net_device *ndev)
 	unregister_netdev(ndev);
 	netif_napi_del(&priv->napi);
 
-	if (!IS_ERR(priv->clk)) {
+	if (!IS_ERR(priv->clk))
 		clk_disable_unprepare(priv->clk);
-	}
-
 
 	return 0;
 }
diff --git a/drivers/net/ethernet/arc/emac_mdio.c b/drivers/net/ethernet/arc/emac_mdio.c
index d5ee986..16419f5 100644
--- a/drivers/net/ethernet/arc/emac_mdio.c
+++ b/drivers/net/ethernet/arc/emac_mdio.c
@@ -7,6 +7,7 @@
 #include <linux/delay.h>
 #include <linux/of_mdio.h>
 #include <linux/platform_device.h>
+#include <linux/gpio/consumer.h>
 
 #include "emac.h"
 
@@ -93,12 +94,31 @@ static int arc_mdio_write(struct mii_bus *bus, int phy_addr,
 		phy_addr, reg_num, value);
 
 	arc_reg_set(priv, R_MDIO,
-		     0x50020000 | (phy_addr << 23) | (reg_num << 18) | value);
+		    0x50020000 | (phy_addr << 23) | (reg_num << 18) | value);
 
 	return arc_mdio_complete_wait(priv);
 }
 
 /**
+ * arc_mdio_reset
+ * @bus: points to the mii_bus structure
+ * Description: reset the MII bus
+ */
+int arc_mdio_reset(struct mii_bus *bus)
+{
+	struct arc_emac_priv *priv = bus->priv;
+	struct arc_emac_mdio_bus_data *data = &priv->bus_data;
+
+	if (data->reset_gpio) {
+		gpiod_set_value_cansleep(data->reset_gpio, 1);
+		msleep(data->msec);
+		gpiod_set_value_cansleep(data->reset_gpio, 0);
+	}
+
+	return 0;
+}
+
+/**
  * arc_mdio_probe - MDIO probe function.
  * @priv:	Pointer to ARC EMAC private data structure.
  *
@@ -109,6 +129,8 @@ static int arc_mdio_write(struct mii_bus *bus, int phy_addr,
  */
 int arc_mdio_probe(struct arc_emac_priv *priv)
 {
+	struct arc_emac_mdio_bus_data *data = &priv->bus_data;
+	struct device_node *np = priv->dev->of_node;
 	struct mii_bus *bus;
 	int error;
 
@@ -122,6 +144,21 @@ int arc_mdio_probe(struct arc_emac_priv *priv)
 	bus->name = "Synopsys MII Bus",
 	bus->read = &arc_mdio_read;
 	bus->write = &arc_mdio_write;
+	bus->reset = &arc_mdio_reset;
+
+	/* optional reset-related properties */
+	data->reset_gpio = devm_gpiod_get_optional(priv->dev, "phy-reset",
+						   GPIOD_OUT_LOW);
+	if (IS_ERR(data->reset_gpio)) {
+		error = PTR_ERR(data->reset_gpio);
+		dev_err(priv->dev, "Failed to request gpio: %d\n", error);
+		return error;
+	}
+
+	of_property_read_u32(np, "phy-reset-duration", &data->msec);
+	/* A sane reset duration should not be longer than 1s */
+	if (data->msec > 1000)
+		data->msec = 1;
 
 	snprintf(bus->id, MII_BUS_ID_SIZE, "%s", bus->name);
 
diff --git a/drivers/net/ethernet/arc/emac_rockchip.c b/drivers/net/ethernet/arc/emac_rockchip.c
index 85e821c..e278e3d 100644
--- a/drivers/net/ethernet/arc/emac_rockchip.c
+++ b/drivers/net/ethernet/arc/emac_rockchip.c
@@ -50,7 +50,7 @@ static void emac_rockchip_set_mac_speed(void *priv, unsigned int speed)
 	u32 data;
 	int err = 0;
 
-	switch(speed) {
+	switch (speed) {
 	case 10:
 		data = (1 << (speed_offset + 16)) | (0 << speed_offset);
 		break;
@@ -83,9 +83,18 @@ static const struct emac_rockchip_soc_data emac_rk3188_emac_data = {
 };
 
 static const struct of_device_id emac_rockchip_dt_ids[] = {
-	{ .compatible = "rockchip,rk3036-emac", .data = &emac_rk3036_emac_data },
-	{ .compatible = "rockchip,rk3066-emac", .data = &emac_rk3066_emac_data },
-	{ .compatible = "rockchip,rk3188-emac", .data = &emac_rk3188_emac_data },
+	{
+		.compatible = "rockchip,rk3036-emac",
+		.data = &emac_rk3036_emac_data,
+	},
+	{
+		.compatible = "rockchip,rk3066-emac",
+		.data = &emac_rk3066_emac_data,
+	},
+	{
+		.compatible = "rockchip,rk3188-emac",
+		.data = &emac_rk3188_emac_data,
+	},
 	{ /* Sentinel */ }
 };
 
@@ -123,9 +132,11 @@ static int emac_rockchip_probe(struct platform_device *pdev)
 		goto out_netdev;
 	}
 
-	priv->grf = syscon_regmap_lookup_by_phandle(dev->of_node, "rockchip,grf");
+	priv->grf = syscon_regmap_lookup_by_phandle(dev->of_node,
+						    "rockchip,grf");
 	if (IS_ERR(priv->grf)) {
-		dev_err(dev, "failed to retrieve global register file (%ld)\n", PTR_ERR(priv->grf));
+		dev_err(dev, "failed to retrieve global register file (%ld)\n",
+			PTR_ERR(priv->grf));
 		err = PTR_ERR(priv->grf);
 		goto out_netdev;
 	}
@@ -135,14 +146,16 @@ static int emac_rockchip_probe(struct platform_device *pdev)
 
 	priv->emac.clk = devm_clk_get(dev, "hclk");
 	if (IS_ERR(priv->emac.clk)) {
-		dev_err(dev, "failed to retrieve host clock (%ld)\n", PTR_ERR(priv->emac.clk));
+		dev_err(dev, "failed to retrieve host clock (%ld)\n",
+			PTR_ERR(priv->emac.clk));
 		err = PTR_ERR(priv->emac.clk);
 		goto out_netdev;
 	}
 
 	priv->refclk = devm_clk_get(dev, "macref");
 	if (IS_ERR(priv->refclk)) {
-		dev_err(dev, "failed to retrieve reference clock (%ld)\n", PTR_ERR(priv->refclk));
+		dev_err(dev, "failed to retrieve reference clock (%ld)\n",
+			PTR_ERR(priv->refclk));
 		err = PTR_ERR(priv->refclk);
 		goto out_netdev;
 	}
@@ -179,19 +192,22 @@ static int emac_rockchip_probe(struct platform_device *pdev)
 
 	err = regmap_write(priv->grf, priv->soc_data->grf_offset, data);
 	if (err) {
-		dev_err(dev, "unable to apply initial settings to grf (%d)\n", err);
+		dev_err(dev, "unable to apply initial settings to grf (%d)\n",
+			err);
 		goto out_regulator_disable;
 	}
 
 	/* RMII interface needs always a rate of 50MHz */
 	err = clk_set_rate(priv->refclk, 50000000);
 	if (err)
-		dev_err(dev, "failed to change reference clock rate (%d)\n", err);
+		dev_err(dev,
+			"failed to change reference clock rate (%d)\n", err);
 
 	if (priv->soc_data->need_div_macclk) {
 		priv->macclk = devm_clk_get(dev, "macclk");
 		if (IS_ERR(priv->macclk)) {
-			dev_err(dev, "failed to retrieve mac clock (%ld)\n", PTR_ERR(priv->macclk));
+			dev_err(dev, "failed to retrieve mac clock (%ld)\n",
+				PTR_ERR(priv->macclk));
 			err = PTR_ERR(priv->macclk);
 			goto out_regulator_disable;
 		}
@@ -205,7 +221,8 @@ static int emac_rockchip_probe(struct platform_device *pdev)
 		/* RMII TX/RX needs always a rate of 25MHz */
 		err = clk_set_rate(priv->macclk, 25000000);
 		if (err)
-			dev_err(dev, "failed to change mac clock rate (%d)\n", err);
+			dev_err(dev,
+				"failed to change mac clock rate (%d)\n", err);
 	}
 
 	err = arc_emac_probe(ndev, interface);
diff --git a/include/dt-bindings/clock/rk3036-cru.h b/include/dt-bindings/clock/rk3036-cru.h
index ebc7a7b..de44109 100644
--- a/include/dt-bindings/clock/rk3036-cru.h
+++ b/include/dt-bindings/clock/rk3036-cru.h
@@ -54,6 +54,7 @@
 #define SCLK_PVTM_VIDEO		125
 #define SCLK_MAC		151
 #define SCLK_MACREF		152
+#define SCLK_MACPLL		153
 #define SCLK_SFC		160
 
 /* aclk gates */
@@ -92,6 +93,7 @@
 #define HCLK_SDMMC		456
 #define HCLK_SDIO		457
 #define HCLK_EMMC		459
+#define HCLK_MAC		460
 #define HCLK_I2S		462
 #define HCLK_LCDC		465
 #define HCLK_ROM		467