diff options
| author | Santan Kumar <santan.kumar@nxp.com> | 2017-06-19 09:56:03 (GMT) |
|---|---|---|
| committer | Xie Xiaobo <xiaobo.xie@nxp.com> | 2017-09-25 07:25:43 (GMT) |
| commit | f69837977a9cb6477917bb9e42e80780d401044e (patch) | |
| tree | 3ad1514af14fda1e6db00d83d1418143fe841505 | |
| parent | 89ca96bb2300a873da0d7375c0bfcbaa4fa5f9b0 (diff) | |
| download | linux-f69837977a9cb6477917bb9e42e80780d401044e.tar.xz | |
arm64: dts: ls2081ardb: Update nodes for QSPI, SATA, INA220
Update ls2081ardb.dts for below nodes:
-As per updated board design, different QSPI flash is connected on
boards, hence change QSPI flash node from n25q512a to s25fs512ss in
device tree.
-Enable dual flash support in QSPI node.
-Add DTS node for INA220.
-Enable SATA node.
Signed-off-by: Santan Kumar <santan.kumar@nxp.com>
Signed-off-by: Tao Yang <b31903@freescale.com>
Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@nxp.com>
| -rw-r--r-- | arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts | 34 |
1 files changed, 28 insertions, 6 deletions
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts b/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts index 26c55a8..c3375bf 100644 --- a/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts +++ b/arch/arm64/boot/dts/freescale/fsl-ls2081a-rdb.dts @@ -87,6 +87,18 @@ }; }; + i2c@2 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x02>; + + ina220@40 { + compatible = "ti,ina220"; + reg = <0x40>; + shunt-resistor = <500>; + }; + }; + i2c@3 { #address-cells = <1>; #size-cells = <0>; @@ -111,25 +123,35 @@ }; }; - &qspi { status = "okay"; - flash0: n25q512a@0 { + fsl,qspi-has-second-chip; + flash0: s25fs512s@0 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p80"; + compatible = "spansion,m25p80"; + m25p,fast-read; spi-max-frequency = <20000000>; reg = <0>; }; - flash1: n25q512a@1 { + flash1: s25fs512s@1 { #address-cells = <1>; #size-cells = <1>; - compatible = "st,m25p80"; + compatible = "spansion,m25p80"; + m25p,fast-read; spi-max-frequency = <20000000>; - reg = <0>; + reg = <1>; }; }; +&sata0 { + status = "okay"; +}; + +&sata1 { + status = "okay"; +}; + &usb0 { status = "okay"; }; |