diff options
| author | Linus Torvalds <torvalds@linux-foundation.org> | 2012-10-10 01:51:35 (GMT) |
|---|---|---|
| committer | Linus Torvalds <torvalds@linux-foundation.org> | 2012-10-10 01:51:35 (GMT) |
| commit | 10f39f04b2cb7a06ba5d4ea0f20bd156d0367bee (patch) | |
| tree | 758f9736bcf0303da4edd5f52afd8ed10e8ea642 | |
| parent | 72055425e53540d9d0e59a57ac8c9b8ce77b62d5 (diff) | |
| parent | f5cf8f07423b2677cebebcebc863af77223a4972 (diff) | |
| download | linux-10f39f04b2cb7a06ba5d4ea0f20bd156d0367bee.tar.xz | |
Merge tag 'for-linus-20121009' of git://git.infradead.org/mtd-2.6
Pull MTD updates from David Woodhouse:
- Disable broken mtdchar mmap() on MMU systems
- Additional ECC tests for NAND flash, and some test cleanups
- New NAND and SPI chip support
- Fixes/cleanup for SH FLCTL NAND controller driver
- Improved hardware support for GPMI NAND controller
- Conversions to device-tree support for various drivers
- Removal of obsolete drivers (sbc8xxx, bcmring, etc.)
- New LPC32xx drivers for MLC and SLC NAND
- Further cleanup of NAND OOB/ECC handling
- UAPI cleanup merge from David Howells (just moving files, since MTD
headers were sorted out long ago to separate user-visible from kernel
bits)
* tag 'for-linus-20121009' of git://git.infradead.org/mtd-2.6: (168 commits)
mtd: Disable mtdchar mmap on MMU systems
UAPI: (Scripted) Disintegrate include/mtd
mtd: nand: detect Samsung K9GBG08U0A, K9GAG08U0F ID
mtd: nand: decode Hynix MLC, 6-byte ID length
mtd: nand: increase max OOB size to 640
mtd: nand: add generic READ ID length calculation functions
mtd: nand: split simple ID decode into its own function
mtd: nand: split extended ID decoding into its own function
mtd: nand: split BB marker options decoding into its own function
mtd: nand: remove redundant ID read
mtd: nand: remove unnecessary variable
mtd: docg4: add missing HAS_IOMEM dependency
mtd: gpmi: initialize the timing registers only one time
mtd: gpmi: add EDO feature for imx6q
mtd: gpmi: do not set the default values for the extra clocks
mtd: gpmi: simplify the DLL setting code
mtd: gpmi: add a new field for HW_GPMI_CTRL1
mtd: gpmi: do not get the clock frequency in gpmi_begin()
mtd: gpmi: add a new field for HW_GPMI_TIMING1
mtd: add helpers to get the supportted ONFI timing mode
...
119 files changed, 6361 insertions, 3239 deletions
diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl index e0aedb7..fe122d6 100644 --- a/Documentation/DocBook/mtdnand.tmpl +++ b/Documentation/DocBook/mtdnand.tmpl @@ -1216,8 +1216,6 @@ in this page</entry> #define NAND_BBT_LASTBLOCK 0x00000010 /* The bbt is at the given page, else we must scan for the bbt */ #define NAND_BBT_ABSPAGE 0x00000020 -/* The bbt is at the given page, else we must scan for the bbt */ -#define NAND_BBT_SEARCH 0x00000040 /* bbt is stored per chip on multichip devices */ #define NAND_BBT_PERCHIP 0x00000080 /* bbt has a version counter at offset veroffs */ diff --git a/Documentation/devicetree/bindings/arm/davinci/nand.txt b/Documentation/devicetree/bindings/arm/davinci/nand.txt new file mode 100644 index 0000000..e37241f --- /dev/null +++ b/Documentation/devicetree/bindings/arm/davinci/nand.txt @@ -0,0 +1,51 @@ +* Texas Instruments Davinci NAND + +This file provides information, what the device node for the +davinci nand interface contain. + +Required properties: +- compatible: "ti,davinci-nand"; +- reg : contain 2 offset/length values: + - offset and length for the access window + - offset and length for accessing the aemif control registers +- ti,davinci-chipselect: Indicates on the davinci_nand driver which + chipselect is used for accessing the nand. + +Recommended properties : +- ti,davinci-mask-ale: mask for ale +- ti,davinci-mask-cle: mask for cle +- ti,davinci-mask-chipsel: mask for chipselect +- ti,davinci-ecc-mode: ECC mode valid values for davinci driver: + - "none" + - "soft" + - "hw" +- ti,davinci-ecc-bits: used ECC bits, currently supported 1 or 4. +- ti,davinci-nand-buswidth: buswidth 8 or 16 +- ti,davinci-nand-use-bbt: use flash based bad block table support. + +Example (enbw_cmc board): +aemif@60000000 { + compatible = "ti,davinci-aemif"; + #address-cells = <2>; + #size-cells = <1>; + reg = <0x68000000 0x80000>; + ranges = <2 0 0x60000000 0x02000000 + 3 0 0x62000000 0x02000000 + 4 0 0x64000000 0x02000000 + 5 0 0x66000000 0x02000000 + 6 0 0x68000000 0x02000000>; + nand@3,0 { + compatible = "ti,davinci-nand"; + reg = <3 0x0 0x807ff + 6 0x0 0x8000>; + #address-cells = <1>; + #size-cells = <1>; + ti,davinci-chipselect = <1>; + ti,davinci-mask-ale = <0>; + ti,davinci-mask-cle = <0>; + ti,davinci-mask-chipsel = <0>; + ti,davinci-ecc-mode = "hw"; + ti,davinci-ecc-bits = <4>; + ti,davinci-nand-use-bbt; + }; +}; diff --git a/Documentation/devicetree/bindings/mtd/atmel-nand.txt b/Documentation/devicetree/bindings/mtd/atmel-nand.txt index a200695..d555421 100644 --- a/Documentation/devicetree/bindings/mtd/atmel-nand.txt +++ b/Documentation/devicetree/bindings/mtd/atmel-nand.txt @@ -3,7 +3,9 @@ Atmel NAND flash Required properties: - compatible : "atmel,at91rm9200-nand". - reg : should specify localbus address and size used for the chip, - and if availlable the ECC. + and hardware ECC controller if available. + If the hardware ECC is PMECC, it should contain address and size for + PMECC, PMECC Error Location controller and ROM which has lookup tables. - atmel,nand-addr-offset : offset for the address latch. - atmel,nand-cmd-offset : offset for the command latch. - #address-cells, #size-cells : Must be present if the device has sub-nodes @@ -16,6 +18,15 @@ Optional properties: - nand-ecc-mode : String, operation mode of the NAND ecc mode, soft by default. Supported values are: "none", "soft", "hw", "hw_syndrome", "hw_oob_first", "soft_bch". +- atmel,has-pmecc : boolean to enable Programmable Multibit ECC hardware. + Only supported by at91sam9x5 or later sam9 product. +- atmel,pmecc-cap : error correct capability for Programmable Multibit ECC + Controller. Supported values are: 2, 4, 8, 12, 24. +- atmel,pmecc-sector-size : sector size for ECC computation. Supported values + are: 512, 1024. +- atmel,pmecc-lookup-table-offset : includes two offsets of lookup table in ROM + for different sector size. First one is for sector size 512, the next is for + sector size 1024. - nand-bus-width : 8 or 16 bus width if not present 8 - nand-on-flash-bbt: boolean to enable on flash bbt option if not present false @@ -39,3 +50,30 @@ nand0: nand@40000000,0 { ... }; }; + +/* for PMECC supported chips */ +nand0: nand@40000000 { + compatible = "atmel,at91rm9200-nand"; + #address-cells = <1>; + #size-cells = <1>; + reg = < 0x40000000 0x10000000 /* bus addr & size */ + 0xffffe000 0x00000600 /* PMECC addr & size */ + 0xffffe600 0x00000200 /* PMECC ERRLOC addr & size */ + 0x00100000 0x00100000 /* ROM addr & size */ + >; + atmel,nand-addr-offset = <21>; /* ale */ + atmel,nand-cmd-offset = <22>; /* cle */ + nand-on-flash-bbt; + nand-ecc-mode = "hw"; + atmel,has-pmecc; /* enable PMECC */ + atmel,pmecc-cap = <2>; + atmel,pmecc-sector-size = <512>; + atmel,pmecc-lookup-table-offset = <0x8000 0x10000>; + gpios = <&pioD 5 0 /* rdy */ + &pioD 4 0 /* nce */ + 0 /* cd */ + >; + partition@0 { + ... + }; +}; diff --git a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt index 1a5bbd3..3fb3f901 100644 --- a/Documentation/devicetree/bindings/mtd/gpmi-nand.txt +++ b/Documentation/devicetree/bindings/mtd/gpmi-nand.txt @@ -12,6 +12,10 @@ Required properties: - interrupt-names : The interrupt names "gpmi-dma", "bch"; - fsl,gpmi-dma-channel : Should contain the dma channel it uses. +Optional properties: + - nand-on-flash-bbt: boolean to enable on flash bbt option if not + present false + The device tree may optionally contain sub-nodes describing partitions of the address space. See partition.txt for more detail. diff --git a/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt b/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt new file mode 100644 index 0000000..d0a3725 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/lpc32xx-mlc.txt @@ -0,0 +1,50 @@ +NXP LPC32xx SoC NAND MLC controller + +Required properties: +- compatible: "nxp,lpc3220-mlc" +- reg: Address and size of the controller +- interrupts: The NAND interrupt specification +- gpios: GPIO specification for NAND write protect + +The following required properties are very controller specific. See the LPC32xx +User Manual 7.5.14 MLC NAND Timing Register (the values here are specified in +Hz, to make them independent of actual clock speed and to provide for good +accuracy:) +- nxp,tcea_delay: TCEA_DELAY +- nxp,busy_delay: BUSY_DELAY +- nxp,nand_ta: NAND_TA +- nxp,rd_high: RD_HIGH +- nxp,rd_low: RD_LOW +- nxp,wr_high: WR_HIGH +- nxp,wr_low: WR_LOW + +Optional subnodes: +- Partitions, see Documentation/devicetree/bindings/mtd/partition.txt + +Example: + + mlc: flash@200A8000 { + compatible = "nxp,lpc3220-mlc"; + reg = <0x200A8000 0x11000>; + interrupts = <11 0>; + #address-cells = <1>; + #size-cells = <1>; + + nxp,tcea-delay = <333333333>; + nxp,busy-delay = <10000000>; + nxp,nand-ta = <18181818>; + nxp,rd-high = <31250000>; + nxp,rd-low = <45454545>; + nxp,wr-high = <40000000>; + nxp,wr-low = <83333333>; + gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */ + + mtd0@00000000 { + label = "boot"; + reg = <0x00000000 0x00064000>; + read-only; + }; + + ... + + }; diff --git a/Documentation/devicetree/bindings/mtd/lpc32xx-slc.txt b/Documentation/devicetree/bindings/mtd/lpc32xx-slc.txt new file mode 100644 index 0000000..d94edc0 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/lpc32xx-slc.txt @@ -0,0 +1,52 @@ +NXP LPC32xx SoC NAND SLC controller + +Required properties: +- compatible: "nxp,lpc3220-slc" +- reg: Address and size of the controller +- nand-on-flash-bbt: Use bad block table on flash +- gpios: GPIO specification for NAND write protect + +The following required properties are very controller specific. See the LPC32xx +User Manual: +- nxp,wdr-clks: Delay before Ready signal is tested on write (W_RDY) +- nxp,rdr-clks: Delay before Ready signal is tested on read (R_RDY) +(The following values are specified in Hz, to make them independent of actual +clock speed:) +- nxp,wwidth: Write pulse width (W_WIDTH) +- nxp,whold: Write hold time (W_HOLD) +- nxp,wsetup: Write setup time (W_SETUP) +- nxp,rwidth: Read pulse width (R_WIDTH) +- nxp,rhold: Read hold time (R_HOLD) +- nxp,rsetup: Read setup time (R_SETUP) + +Optional subnodes: +- Partitions, see Documentation/devicetree/bindings/mtd/partition.txt + +Example: + + slc: flash@20020000 { + compatible = "nxp,lpc3220-slc"; + reg = <0x20020000 0x1000>; + #address-cells = <1>; + #size-cells = <1>; + + nxp,wdr-clks = <14>; + nxp,wwidth = <40000000>; + nxp,whold = <100000000>; + nxp,wsetup = <100000000>; + nxp,rdr-clks = <14>; + nxp,rwidth = <40000000>; + nxp,rhold = <66666666>; + nxp,rsetup = <100000000>; + nand-on-flash-bbt; + gpios = <&gpio 5 19 1>; /* GPO_P3 19, active low */ + + mtd0@00000000 { + label = "phy3250-boot"; + reg = <0x00000000 0x00064000>; + read-only; + }; + + ... + + }; diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt index a63c2bd7..94de19b 100644 --- a/Documentation/devicetree/bindings/mtd/mtd-physmap.txt +++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.txt @@ -16,6 +16,13 @@ file systems on embedded devices. - #address-cells, #size-cells : Must be present if the device has sub-nodes representing partitions (see below). In this case both #address-cells and #size-cells must be equal to 1. + - no-unaligned-direct-access: boolean to disable the default direct + mapping of the flash. + On some platforms (e.g. MPC5200) a direct 1:1 mapping may cause + problems with JFFS2 usage, as the local bus (LPB) doesn't support + unaligned accesses as implemented in the JFFS2 code via memcpy(). + By defining "no-unaligned-direct-access", the flash will not be + exposed directly to the MTD users (e.g. JFFS2) any more. For JEDEC compatible devices, the following additional properties are defined: diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi index 2f71a91..75d069f 100644 --- a/arch/arm/boot/dts/imx51.dtsi +++ b/arch/arm/boot/dts/imx51.dtsi @@ -407,6 +407,13 @@ status = "disabled"; }; + nand@83fdb000 { + compatible = "fsl,imx51-nand"; + reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>; + interrupts = <8>; + status = "disabled"; + }; + ssi3: ssi@83fe8000 { compatible = "fsl,imx51-ssi", "fsl,imx21-ssi"; reg = <0x83fe8000 0x4000>; diff --git a/arch/arm/boot/dts/imx53.dtsi b/arch/arm/boot/dts/imx53.dtsi index 221cf33..76ebb1a 100644 --- a/arch/arm/boot/dts/imx53.dtsi +++ b/arch/arm/boot/dts/imx53.dtsi @@ -518,6 +518,13 @@ status = "disabled"; }; + nand@63fdb000 { + compatible = "fsl,imx53-nand"; + reg = <0x63fdb000 0x1000 0xf7ff0000 0x10000>; + interrupts = <8>; + status = "disabled"; + }; + ssi3: ssi@63fe8000 { compatible = "fsl,imx53-ssi", "fsl,imx21-ssi"; reg = <0x63fe8000 0x4000>; diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig index cedc92e..1457971 100644 --- a/arch/arm/configs/cam60_defconfig +++ b/arch/arm/configs/cam60_defconfig @@ -49,7 +49,6 @@ CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PLATRAM=m CONFIG_MTD_DATAFLASH=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y CONFIG_MTD_NAND_ATMEL=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index e53c475..4b8a25d 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -97,7 +97,6 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_ROM=y CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y CONFIG_MTD_NAND_SHARPSL=y CONFIG_BLK_DEV_LOOP=y CONFIG_IDE=y diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index 8e97b2f..806005a 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -61,7 +61,6 @@ CONFIG_MTD_CFI_STAA=y CONFIG_MTD_ROM=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y CONFIG_BLK_DEV_NBD=y CONFIG_EEPROM_LEGACY=y CONFIG_SCSI=y diff --git a/arch/arm/configs/mini2440_defconfig b/arch/arm/configs/mini2440_defconfig index 082175c..00630e6 100644 --- a/arch/arm/configs/mini2440_defconfig +++ b/arch/arm/configs/mini2440_defconfig @@ -102,7 +102,6 @@ CONFIG_MTD_CFI_STAA=y CONFIG_MTD_RAM=y CONFIG_MTD_ROM=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y CONFIG_MTD_NAND_S3C2410=y CONFIG_MTD_NAND_PLATFORM=y CONFIG_MTD_LPDDR=y diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index 7305ebd..1f08219 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -49,7 +49,6 @@ CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y CONFIG_MTD_NAND_ORION=y CONFIG_BLK_DEV_LOOP=y # CONFIG_SCSI_PROC_FS is not set diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig index bf123c5..240b25e 100644 --- a/arch/arm/configs/nhk8815_defconfig +++ b/arch/arm/configs/nhk8815_defconfig @@ -57,7 +57,6 @@ CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ECC_SMC=y -CONFIG_MTD_NAND_VERIFY_WRITE=y CONFIG_MTD_NAND_NOMADIK=y CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index a288d70..cd5e6ba 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -72,7 +72,6 @@ CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y CONFIG_MTD_NAND_PLATFORM=y CONFIG_MTD_NAND_ORION=y CONFIG_BLK_DEV_LOOP=y diff --git a/arch/arm/configs/pxa3xx_defconfig b/arch/arm/configs/pxa3xx_defconfig index 1677a06..60e3138 100644 --- a/arch/arm/configs/pxa3xx_defconfig +++ b/arch/arm/configs/pxa3xx_defconfig @@ -36,7 +36,6 @@ CONFIG_MTD_CONCAT=y CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y CONFIG_MTD_NAND_PXA3xx=y CONFIG_MTD_NAND_PXA3xx_BUILTIN=y CONFIG_MTD_ONENAND=y diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index 7015827..df77931 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -94,7 +94,6 @@ CONFIG_MTD_BLOCK=y CONFIG_MTD_ROM=y CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y CONFIG_MTD_NAND_SHARPSL=y CONFIG_BLK_DEV_LOOP=y CONFIG_IDE=y diff --git a/arch/arm/mach-clps711x/autcpu12.c b/arch/arm/mach-clps711x/autcpu12.c index 3fb79a1..3287191 100644 --- a/arch/arm/mach-clps711x/autcpu12.c +++ b/arch/arm/mach-clps711x/autcpu12.c @@ -23,6 +23,8 @@ #include <linux/string.h> #include <linux/mm.h> #include <linux/io.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> #include <mach/hardware.h> #include <asm/sizes.h> @@ -62,9 +64,26 @@ void __init autcpu12_map_io(void) iotable_init(autcpu12_io_desc, ARRAY_SIZE(autcpu12_io_desc)); } +static struct resource autcpu12_nvram_resource[] __initdata = { + DEFINE_RES_MEM_NAMED(AUTCPU12_PHYS_NVRAM, SZ_128K, "SRAM"), +}; + +static struct platform_device autcpu12_nvram_pdev __initdata = { + .name = "autcpu12_nvram", + .id = -1, + .resource = autcpu12_nvram_resource, + .num_resources = ARRAY_SIZE(autcpu12_nvram_resource), +}; + +static void __init autcpu12_init(void) +{ + platform_device_register(&autcpu12_nvram_pdev); +} + MACHINE_START(AUTCPU12, "autronix autcpu12") /* Maintainer: Thomas Gleixner */ .atag_offset = 0x20000, + .init_machine = autcpu12_init, .map_io = autcpu12_map_io, .init_irq = clps711x_init_irq, .timer = &clps711x_timer, diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index e5165a8..a0bf848 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -369,6 +369,7 @@ int __init mx51_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "83fcc000.ssi"); clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "70014000.ssi"); clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "83fe8000.ssi"); + clk_register_clkdev(clk[nfc_gate], NULL, "83fdb000.nand"); /* set the usboh3 parent to pll2_sw */ clk_set_parent(clk[usboh3_sel], clk[pll2_sw]); @@ -461,6 +462,7 @@ int __init mx53_clocks_init(unsigned long rate_ckil, unsigned long rate_osc, clk_register_clkdev(clk[ssi1_ipg_gate], NULL, "63fcc000.ssi"); clk_register_clkdev(clk[ssi2_ipg_gate], NULL, "50014000.ssi"); clk_register_clkdev(clk[ssi3_ipg_gate], NULL, "63fd0000.ssi"); + clk_register_clkdev(clk[nfc_gate], NULL, "63fdb000.nand"); clk_register_clkdev(clk[can1_ipg_gate], "ipg", "53fc8000.can"); clk_register_clkdev(clk[can1_serial_gate], "per", "53fc8000.can"); clk_register_clkdev(clk[can2_ipg_gate], "ipg", "53fcc000.can"); diff --git a/arch/arm/plat-mxc/devices/platform-mxc_nand.c b/arch/arm/plat-mxc/devices/platform-mxc_nand.c index 1568f39..95b75cc 100644 --- a/arch/arm/plat-mxc/devices/platform-mxc_nand.c +++ b/arch/arm/plat-mxc/devices/platform-mxc_nand.c @@ -63,10 +63,6 @@ struct platform_device *__init imx_add_mxc_nand( /* AXI has to come first, that's how the mxc_nand driver expect it */ struct resource res[] = { { - .start = data->axibase, - .end = data->axibase + SZ_16K - 1, - .flags = IORESOURCE_MEM, - }, { .start = data->iobase, .end = data->iobase + data->iosize - 1, .flags = IORESOURCE_MEM, @@ -74,10 +70,13 @@ struct platform_device *__init imx_add_mxc_nand( .start = data->irq, .end = data->irq, .flags = IORESOURCE_IRQ, + }, { + .start = data->axibase, + .end = data->axibase + SZ_16K - 1, + .flags = IORESOURCE_MEM, }, }; return imx_add_platform_device("mxc_nand", data->id, - res + !data->axibase, - ARRAY_SIZE(res) - !data->axibase, + res, ARRAY_SIZE(res) - !data->axibase, pdata, sizeof(*pdata)); } diff --git a/arch/blackfin/configs/BF561-ACVILON_defconfig b/arch/blackfin/configs/BF561-ACVILON_defconfig index 0fdc4ec..9198837 100644 --- a/arch/blackfin/configs/BF561-ACVILON_defconfig +++ b/arch/blackfin/configs/BF561-ACVILON_defconfig @@ -57,7 +57,6 @@ CONFIG_MTD_PLATRAM=y CONFIG_MTD_PHRAM=y CONFIG_MTD_BLOCK2MTD=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y CONFIG_MTD_NAND_PLATFORM=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y diff --git a/arch/mips/configs/rb532_defconfig b/arch/mips/configs/rb532_defconfig index 55902d9..b85b121 100644 --- a/arch/mips/configs/rb532_defconfig +++ b/arch/mips/configs/rb532_defconfig @@ -119,7 +119,6 @@ CONFIG_MTD_CHAR=y CONFIG_MTD_BLOCK=y CONFIG_MTD_BLOCK2MTD=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y CONFIG_MTD_NAND_PLATFORM=y CONFIG_ATA=y # CONFIG_ATA_VERBOSE_ERROR is not set diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index 126ef1b..e4ad2e2 100644 --- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -38,7 +38,6 @@ CONFIG_MTD_CFI=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP_OF=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y CONFIG_MTD_NAND_FSL_ELBC=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index abcf00a..34ff568 100644 --- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig @@ -37,7 +37,6 @@ CONFIG_MTD_CFI=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP_OF=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y CONFIG_BLK_DEV_RAM=y diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index 9352e44..09116c6 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -50,7 +50,6 @@ CONFIG_MTD_CFI=y CONFIG_MTD_CFI_AMDSTD=y CONFIG_MTD_PHYSMAP_OF=y CONFIG_MTD_NAND=y -CONFIG_MTD_NAND_VERIFY_WRITE=y CONFIG_MTD_NAND_FSL_ELBC=y CONFIG_PROC_DEVICETREE=y CONFIG_BLK_DEV_LOOP=y diff --git a/drivers/mtd/Kconfig b/drivers/mtd/Kconfig index 27143e0..73fcbbe 100644 --- a/drivers/mtd/Kconfig +++ b/drivers/mtd/Kconfig @@ -148,6 +148,13 @@ config MTD_BCM63XX_PARTS This provides partions parsing for BCM63xx devices with CFE bootloaders. +config MTD_BCM47XX_PARTS + tristate "BCM47XX partitioning support" + depends on BCM47XX + help + This provides partitions parser for devices based on BCM47xx + boards. + comment "User Modules And Translation Layers" config MTD_CHAR diff --git a/drivers/mtd/Makefile b/drivers/mtd/Makefile index f901354..18a38e5 100644 --- a/drivers/mtd/Makefile +++ b/drivers/mtd/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o obj-$(CONFIG_MTD_AFS_PARTS) += afs.o obj-$(CONFIG_MTD_AR7_PARTS) += ar7part.o obj-$(CONFIG_MTD_BCM63XX_PARTS) += bcm63xxpart.o +obj-$(CONFIG_MTD_BCM47XX_PARTS) += bcm47xxpart.o # 'Users' - code which presents functionality to userspace. obj-$(CONFIG_MTD_CHAR) += mtdchar.o diff --git a/drivers/mtd/bcm47xxpart.c b/drivers/mtd/bcm47xxpart.c new file mode 100644 index 0000000..e06d782 --- /dev/null +++ b/drivers/mtd/bcm47xxpart.c @@ -0,0 +1,202 @@ +/* + * BCM47XX MTD partitioning + * + * Copyright © 2012 Rafał Miłecki <zajec5@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <asm/mach-bcm47xx/nvram.h> + +/* 10 parts were found on sflash on Netgear WNDR4500 */ +#define BCM47XXPART_MAX_PARTS 12 + +/* + * Amount of bytes we read when analyzing each block of flash memory. + * Set it big enough to allow detecting partition and reading important data. + */ +#define BCM47XXPART_BYTES_TO_READ 0x404 + +/* Magics */ +#define BOARD_DATA_MAGIC 0x5246504D /* MPFR */ +#define POT_MAGIC1 0x54544f50 /* POTT */ +#define POT_MAGIC2 0x504f /* OP */ +#define ML_MAGIC1 0x39685a42 +#define ML_MAGIC2 0x26594131 +#define TRX_MAGIC 0x30524448 + +struct trx_header { + uint32_t magic; + uint32_t length; + uint32_t crc32; + uint16_t flags; + uint16_t version; + uint32_t offset[3]; +} __packed; + +static void bcm47xxpart_add_part(struct mtd_partition *part, char *name, + u64 offset, uint32_t mask_flags) +{ + part->name = name; + part->offset = offset; + part->mask_flags = mask_flags; +} + +static int bcm47xxpart_parse(struct mtd_info *master, + struct mtd_partition **pparts, + struct mtd_part_parser_data *data) +{ + struct mtd_partition *parts; + uint8_t i, curr_part = 0; + uint32_t *buf; + size_t bytes_read; + uint32_t offset; + uint32_t blocksize = 0x10000; + struct trx_header *trx; + + /* Alloc */ + parts = kzalloc(sizeof(struct mtd_partition) * BCM47XXPART_MAX_PARTS, + GFP_KERNEL); + buf = kzalloc(BCM47XXPART_BYTES_TO_READ, GFP_KERNEL); + + /* Parse block by block looking for magics */ + for (offset = 0; offset <= master->size - blocksize; + offset += blocksize) { + /* Nothing more in higher memory */ + if (offset >= 0x2000000) + break; + + if (curr_part > BCM47XXPART_MAX_PARTS) { + pr_warn("Reached maximum number of partitions, scanning stopped!\n"); + break; + } + + /* Read beginning of the block */ + if (mtd_read(master, offset, BCM47XXPART_BYTES_TO_READ, + &bytes_read, (uint8_t *)buf) < 0) { + pr_err("mtd_read error while parsing (offset: 0x%X)!\n", + offset); + continue; + } + + /* CFE has small NVRAM at 0x400 */ + if (buf[0x400 / 4] == NVRAM_HEADER) { + bcm47xxpart_add_part(&parts[curr_part++], "boot", + offset, MTD_WRITEABLE); + continue; + } + + /* Standard NVRAM */ + if (buf[0x000 / 4] == NVRAM_HEADER) { + bcm47xxpart_add_part(&parts[curr_part++], "nvram", + offset, 0); + continue; + } + + /* + * board_data starts with board_id which differs across boards, + * but we can use 'MPFR' (hopefully) magic at 0x100 + */ + if (buf[0x100 / 4] == BOARD_DATA_MAGIC) { + bcm47xxpart_add_part(&parts[curr_part++], "board_data", + offset, MTD_WRITEABLE); + continue; + } + + /* POT(TOP) */ + if (buf[0x000 / 4] == POT_MAGIC1 && + (buf[0x004 / 4] & 0xFFFF) == POT_MAGIC2) { + bcm47xxpart_add_part(&parts[curr_part++], "POT", offset, + MTD_WRITEABLE); + continue; + } + + /* ML */ + if (buf[0x010 / 4] == ML_MAGIC1 && + buf[0x014 / 4] == ML_MAGIC2) { + bcm47xxpart_add_part(&parts[curr_part++], "ML", offset, + MTD_WRITEABLE); + continue; + } + + /* TRX */ + if (buf[0x000 / 4] == TRX_MAGIC) { + trx = (struct trx_header *)buf; + + i = 0; + /* We have LZMA loader if offset[2] points to sth */ + if (trx->offset[2]) { + bcm47xxpart_add_part(&parts[curr_part++], + "loader", + offset + trx->offset[i], + 0); + i++; + } + + bcm47xxpart_add_part(&parts[curr_part++], "linux", + offset + trx->offset[i], 0); + i++; + + /* + * Pure rootfs size is known and can be calculated as: + * trx->length - trx->offset[i]. We don't fill it as + * we want to have jffs2 (overlay) in the same mtd. + */ + bcm47xxpart_add_part(&parts[curr_part++], "rootfs", + offset + trx->offset[i], 0); + i++; + + /* + * We have whole TRX scanned, skip to the next part. Use + * roundown (not roundup), as the loop will increase + * offset in next step. + */ + offset = rounddown(offset + trx->length, blocksize); + continue; + } + } + kfree(buf); + + /* + * Assume that partitions end at the beginning of the one they are + * followed by. + */ + for (i = 0; i < curr_part - 1; i++) + parts[i].size = parts[i + 1].offset - parts[i].offset; + if (curr_part > 0) + parts[curr_part - 1].size = + master->size - parts[curr_part - 1].offset; + + *pparts = parts; + return curr_part; +}; + +static struct mtd_part_parser bcm47xxpart_mtd_parser = { + .owner = THIS_MODULE, + .parse_fn = bcm47xxpart_parse, + .name = "bcm47xxpart", +}; + +static int __init bcm47xxpart_init(void) +{ + return register_mtd_parser(&bcm47xxpart_mtd_parser); +} + +static void __exit bcm47xxpart_exit(void) +{ + deregister_mtd_parser(&bcm47xxpart_mtd_parser); +} + +module_init(bcm47xxpart_init); +module_exit(bcm47xxpart_exit); + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("MTD partitioning for BCM47XX flash memories"); diff --git a/drivers/mtd/chips/Kconfig b/drivers/mtd/chips/Kconfig index b1e3c26..e469b01 100644 --- a/drivers/mtd/chips/Kconfig +++ b/drivers/mtd/chips/Kconfig @@ -43,9 +43,6 @@ choice prompt "Flash cmd/query data swapping" depends on MTD_CFI_ADV_OPTIONS default MTD_CFI_NOSWAP - -config MTD_CFI_NOSWAP - bool "NO" ---help--- This option defines the way in which the CPU attempts to arrange data bits when writing the 'magic' commands to the chips. Saying @@ -55,12 +52,8 @@ config MTD_CFI_NOSWAP Specific arrangements are possible with the BIG_ENDIAN_BYTE and LITTLE_ENDIAN_BYTE, if the bytes are reversed. - If you have a LART, on which the data (and address) lines were - connected in a fashion which ensured that the nets were as short - as possible, resulting in a bit-shuffling which seems utterly - random to the untrained eye, you need the LART_ENDIAN_BYTE option. - - Yes, there really exists something sicker than PDP-endian :) +config MTD_CFI_NOSWAP + bool "NO" config MTD_CFI_BE_BYTE_SWAP bool "BIG_ENDIAN_BYTE" diff --git a/drivers/mtd/chips/cfi_cmdset_0001.c b/drivers/mtd/chips/cfi_cmdset_0001.c index dbbd2ed..7751443 100644 --- a/drivers/mtd/chips/cfi_cmdset_0001.c +++ b/drivers/mtd/chips/cfi_cmdset_0001.c @@ -2043,7 +2043,7 @@ static int __xipram do_xxlock_oneblock(struct map_info *map, struct flchip *chip { struct cfi_private *cfi = map->fldrv_priv; struct cfi_pri_intelext *extp = cfi->cmdset_priv; - int udelay; + int mdelay; int ret; adr += chip->start; @@ -2072,9 +2072,17 @@ static int __xipram do_xxlock_oneblock(struct map_info *map, struct flchip *chip * If Instant Individual Block Locking supported then no need * to delay. */ - udelay = (!extp || !(extp->FeatureSupport & (1 << 5))) ? 1000000/HZ : 0; + /* + * Unlocking may take up to 1.4 seconds on some Intel flashes. So + * lets use a max of 1.5 seconds (1500ms) as timeout. + * + * See "Clear Block Lock-Bits Time" on page 40 in + * "3 Volt Intel StrataFlash Memory" 28F128J3,28F640J3,28F320J3 manual + * from February 2003 + */ + mdelay = (!extp || !(extp->FeatureSupport & (1 << 5))) ? 1500 : 0; - ret = WAIT_TIMEOUT(map, chip, adr, udelay, udelay * 100); + ret = WAIT_TIMEOUT(map, chip, adr, mdelay, mdelay * 1000); if (ret) { map_write(map, CMD(0x70), adr); chip->state = FL_STATUS; diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 22d0493..5ff5c4a 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -431,6 +431,68 @@ static void cfi_fixup_major_minor(struct cfi_private *cfi, } } +static int is_m29ew(struct cfi_private *cfi) +{ + if (cfi->mfr == CFI_MFR_INTEL && + ((cfi->device_type == CFI_DEVICETYPE_X8 && (cfi->id & 0xff) == 0x7e) || + (cfi->device_type == CFI_DEVICETYPE_X16 && cfi->id == 0x227e))) + return 1; + return 0; +} + +/* + * From TN-13-07: Patching the Linux Kernel and U-Boot for M29 Flash, page 20: + * Some revisions of the M29EW suffer from erase suspend hang ups. In + * particular, it can occur when the sequence + * Erase Confirm -> Suspend -> Program -> Resume + * causes a lockup due to internal timing issues. The consequence is that the + * erase cannot be resumed without inserting a dummy command after programming + * and prior to resuming. [...] The work-around is to issue a dummy write cycle + * that writes an F0 command code before the RESUME command. + */ +static void cfi_fixup_m29ew_erase_suspend(struct map_info *map, + unsigned long adr) +{ + struct cfi_private *cfi = map->fldrv_priv; + /* before resume, insert a dummy 0xF0 cycle for Micron M29EW devices */ + if (is_m29ew(cfi)) + map_write(map, CMD(0xF0), adr); +} + +/* + * From TN-13-07: Patching the Linux Kernel and U-Boot for M29 Flash, page 22: + * + * Some revisions of the M29EW (for example, A1 and A2 step revisions) + * are affected by a problem that could cause a hang up when an ERASE SUSPEND + * command is issued after an ERASE RESUME operation without waiting for a + * minimum delay. The result is that once the ERASE seems to be completed + * (no bits are toggling), the contents of the Flash memory block on which + * the erase was ongoing could be inconsistent with the expected values + * (typically, the array value is stuck to the 0xC0, 0xC4, 0x80, or 0x84 + * values), causing a consequent failure of the ERASE operation. + * The occurrence of this issue could be high, especially when file system + * operations on the Flash are intensive. As a result, it is recommended + * that a patch be applied. Intensive file system operations can cause many + * calls to the garbage routine to free Flash space (also by erasing physical + * Flash blocks) and as a result, many consecutive SUSPEND and RESUME + * commands can occur. The problem disappears when a delay is inserted after + * the RESUME command by using the udelay() function available in Linux. + * The DELAY value must be tuned based on the customer's platform. + * The maximum value that fixes the problem in all cases is 500us. + * But, in our experience, a delay of 30 µs to 50 µs is sufficient + * in most cases. + * We have chosen 500µs because this latency is acceptable. + */ +static void cfi_fixup_m29ew_delay_after_resume(struct cfi_private *cfi) +{ + /* + * Resolving the Delay After Resume Issue see Micron TN-13-07 + * Worst case delay must be 500µs but 30-50µs should be ok as well + */ + if (is_m29ew(cfi)) + cfi_udelay(500); +} + struct mtd_info *cfi_cmdset_0002(struct map_info *map, int primary) { struct cfi_private *cfi = map->fldrv_priv; @@ -776,7 +838,10 @@ static void put_chip(struct map_info *map, struct flchip *chip, unsigned long ad switch(chip->oldstate) { case FL_ERASING: + cfi_fixup_m29ew_erase_suspend(map, + chip->in_progress_block_addr); map_write(map, cfi->sector_erase_cmd, chip->in_progress_block_addr); + cfi_fixup_m29ew_delay_after_resume(cfi); chip->oldstate = FL_READY; chip->state = FL_ERASING; break; @@ -916,6 +981,8 @@ static void __xipram xip_udelay(struct map_info *map, struct flchip *chip, /* Disallow XIP again */ local_irq_disable(); + /* Correct Erase Suspend Hangups for M29EW */ + cfi_fixup_m29ew_erase_suspend(map, adr); /* Resume the write or erase operation */ map_write(map, cfi->sector_erase_cmd, adr); chip->state = oldstate; diff --git a/drivers/mtd/cmdlinepart.c b/drivers/mtd/cmdlinepart.c index 4558e0f..aed1b8a 100644 --- a/drivers/mtd/cmdlinepart.c +++ b/drivers/mtd/cmdlinepart.c @@ -39,11 +39,10 @@ #include <linux/kernel.h> #include <linux/slab.h> - #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> -#include <linux/bootmem.h> #include <linux/module.h> +#include <linux/err.h> /* error message prefix */ #define ERRP "mtd: " @@ -72,7 +71,7 @@ static struct cmdline_mtd_partition *partitions; /* the command line passed to mtdpart_setup() */ static char *cmdline; -static int cmdline_parsed = 0; +static int cmdline_parsed; /* * Parse one partition definition for an MTD. Since there can be many @@ -83,15 +82,14 @@ static int cmdline_parsed = 0; * syntax has been verified ok. */ static struct mtd_partition * newpart(char *s, - char **retptr, - int *num_parts, - int this_part, - unsigned char **extra_mem_ptr, - int extra_mem_size) + char **retptr, + int *num_parts, + int this_part, + unsigned char **extra_mem_ptr, + int extra_mem_size) { struct mtd_partition *parts; - unsigned long size; - unsigned long offset = OFFSET_CONTINUOUS; + unsigned long size, offset = OFFSET_CONTINUOUS; char *name; int name_len; unsigned char *extra_mem; @@ -99,124 +97,106 @@ static struct mtd_partition * newpart(char *s, unsigned int mask_flags; /* fetch the partition size */ - if (*s == '-') - { /* assign all remaining space to this partition */ + if (*s == '-') { + /* assign all remaining space to this partition */ size = SIZE_REMAINING; s++; - } - else - { + } else { size = memparse(s, &s); - if (size < PAGE_SIZE) - { + if (size < PAGE_SIZE) { printk(KERN_ERR ERRP "partition size too small (%lx)\n", size); - return NULL; + return ERR_PTR(-EINVAL); } } /* fetch partition name and flags */ mask_flags = 0; /* this is going to be a regular partition */ delim = 0; - /* check for offset */ - if (*s == '@') - { - s++; - offset = memparse(s, &s); - } - /* now look for name */ + + /* check for offset */ + if (*s == '@') { + s++; + offset = memparse(s, &s); + } + + /* now look for name */ if (*s == '(') - { delim = ')'; - } - if (delim) - { + if (delim) { char *p; - name = ++s; + name = ++s; p = strchr(name, delim); - if (!p) - { + if (!p) { printk(KERN_ERR ERRP "no closing %c found in partition name\n", delim); - return NULL; + return ERR_PTR(-EINVAL); } name_len = p - name; s = p + 1; - } - else - { - name = NULL; + } else { + name = NULL; name_len = 13; /* Partition_000 */ } /* record name length for memory allocation later */ extra_mem_size += name_len + 1; - /* test for options */ - if (strncmp(s, "ro", 2) == 0) - { + /* test for options */ + if (strncmp(s, "ro", 2) == 0) { mask_flags |= MTD_WRITEABLE; s += 2; - } + } - /* if lk is found do NOT unlock the MTD partition*/ - if (strncmp(s, "lk", 2) == 0) - { + /* if lk is found do NOT unlock the MTD partition*/ + if (strncmp(s, "lk", 2) == 0) { mask_flags |= MTD_POWERUP_LOCK; s += 2; - } + } /* test if more partitions are following */ - if (*s == ',') - { - if (size == SIZE_REMAINING) - { + if (*s == ',') { + if (size == SIZE_REMAINING) { printk(KERN_ERR ERRP "no partitions allowed after a fill-up partition\n"); - return NULL; + return ERR_PTR(-EINVAL); } /* more partitions follow, parse them */ parts = newpart(s + 1, &s, num_parts, this_part + 1, &extra_mem, extra_mem_size); - if (!parts) - return NULL; - } - else - { /* this is the last partition: allocate space for all */ + if (IS_ERR(parts)) + return parts; + } else { + /* this is the last partition: allocate space for all */ int alloc_size; *num_parts = this_part + 1; alloc_size = *num_parts * sizeof(struct mtd_partition) + extra_mem_size; + parts = kzalloc(alloc_size, GFP_KERNEL); if (!parts) - return NULL; + return ERR_PTR(-ENOMEM); extra_mem = (unsigned char *)(parts + *num_parts); } + /* enter this partition (offset will be calculated later if it is zero at this point) */ parts[this_part].size = size; parts[this_part].offset = offset; parts[this_part].mask_flags = mask_flags; if (name) - { strlcpy(extra_mem, name, name_len + 1); - } else - { sprintf(extra_mem, "Partition_%03d", this_part); - } parts[this_part].name = extra_mem; extra_mem += name_len + 1; dbg(("partition %d: name <%s>, offset %llx, size %llx, mask flags %x\n", - this_part, - parts[this_part].name, - parts[this_part].offset, - parts[this_part].size, - parts[this_part].mask_flags)); + this_part, parts[this_part].name, parts[this_part].offset, + parts[this_part].size, parts[this_part].mask_flags)); /* return (updated) pointer to extra_mem memory */ if (extra_mem_ptr) - *extra_mem_ptr = extra_mem; + *extra_mem_ptr = extra_mem; /* return (updated) pointer command line string */ *retptr = s; @@ -236,16 +216,16 @@ static int mtdpart_setup_real(char *s) { struct cmdline_mtd_partition *this_mtd; struct mtd_partition *parts; - int mtd_id_len; - int num_parts; + int mtd_id_len, num_parts; char *p, *mtd_id; - mtd_id = s; + mtd_id = s; + /* fetch <mtd-id> */ - if (!(p = strchr(s, ':'))) - { + p = strchr(s, ':'); + if (!p) { printk(KERN_ERR ERRP "no mtd-id\n"); - return 0; + return -EINVAL; } mtd_id_len = p - mtd_id; @@ -262,8 +242,7 @@ static int mtdpart_setup_real(char *s) (unsigned char**)&this_mtd, /* out: extra mem */ mtd_id_len + 1 + sizeof(*this_mtd) + sizeof(void*)-1 /*alignment*/); - if(!parts) - { + if (IS_ERR(parts)) { /* * An error occurred. We're either: * a) out of memory, or @@ -271,12 +250,12 @@ static int mtdpart_setup_real(char *s) * Either way, this mtd is hosed and we're * unlikely to succeed in parsing any more */ - return 0; + return PTR_ERR(parts); } /* align this_mtd */ this_mtd = (struct cmdline_mtd_partition *) - ALIGN((unsigned long)this_mtd, sizeof(void*)); + ALIGN((unsigned long)this_mtd, sizeof(void *)); /* enter results */ this_mtd->parts = parts; this_mtd->num_parts = num_parts; @@ -296,14 +275,14 @@ static int mtdpart_setup_real(char *s) break; /* does another spec follow? */ - if (*s != ';') - { + if (*s != ';') { printk(KERN_ERR ERRP "bad character after partition (%c)\n", *s); - return 0; + return -EINVAL; } s++; } - return 1; + + return 0; } /* @@ -318,44 +297,58 @@ static int parse_cmdline_partitions(struct mtd_info *master, struct mtd_part_parser_data *data) { unsigned long offset; - int i; + int i, err; struct cmdline_mtd_partition *part; const char *mtd_id = master->name; /* parse command line */ - if (!cmdline_parsed) - mtdpart_setup_real(cmdline); + if (!cmdline_parsed) { + err = mtdpart_setup_real(cmdline); + if (err) + return err; + } - for(part = partitions; part; part = part->next) - { - if ((!mtd_id) || (!strcmp(part->mtd_id, mtd_id))) - { - for(i = 0, offset = 0; i < part->num_parts; i++) - { + for (part = partitions; part; part = part->next) { + if ((!mtd_id) || (!strcmp(part->mtd_id, mtd_id))) { + for (i = 0, offset = 0; i < part->num_parts; i++) { if (part->parts[i].offset == OFFSET_CONTINUOUS) - part->parts[i].offset = offset; + part->parts[i].offset = offset; else - offset = part->parts[i].offset; + offset = part->parts[i].offset; + if (part->parts[i].size == SIZE_REMAINING) - part->parts[i].size = master->size - offset; - if (offset + part->parts[i].size > master->size) - { + part->parts[i].size = master->size - offset; + + if (part->parts[i].size == 0) { + printk(KERN_WARNING ERRP + "%s: skipping zero sized partition\n", + part->mtd_id); + part->num_parts--; + memmove(&part->parts[i], + &part->parts[i + 1], + sizeof(*part->parts) * (part->num_parts - i)); + continue; + } + + if (offset + part->parts[i].size > master->size) { printk(KERN_WARNING ERRP "%s: partitioning exceeds flash size, truncating\n", part->mtd_id); part->parts[i].size = master->size - offset; - part->num_parts = i; } offset += part->parts[i].size; } + *pparts = kmemdup(part->parts, sizeof(*part->parts) * part->num_parts, GFP_KERNEL); if (!*pparts) return -ENOMEM; + return part->num_parts; } } + return 0; } diff --git a/drivers/mtd/devices/Kconfig b/drivers/mtd/devices/Kconfig index 4cdb2af..27f80cd 100644 --- a/drivers/mtd/devices/Kconfig +++ b/drivers/mtd/devices/Kconfig @@ -97,7 +97,7 @@ config MTD_M25P80 doesn't support the JEDEC ID instruction. config M25PXX_USE_FAST_READ - bool "Use FAST_READ OPCode allowing SPI CLK <= 50MHz" + bool "Use FAST_READ OPCode allowing SPI CLK >= 50MHz" depends on MTD_M25P80 default y help @@ -120,6 +120,14 @@ config MTD_SST25L Set up your spi devices with the right board-specific platform data, if you want to specify device partitioning. +config MTD_BCM47XXSFLASH + tristate "R/O support for serial flash on BCMA bus" + depends on BCMA_SFLASH + help + BCMA bus can have various flash memories attached, they are + registered by bcma as platform devices. This enables driver for + serial flash memories (only read-only mode is implemented). + config MTD_SLRAM tristate "Uncached system RAM" help diff --git a/drivers/mtd/devices/Makefile b/drivers/mtd/devices/Makefile index a4dd1d8..395733a 100644 --- a/drivers/mtd/devices/Makefile +++ b/drivers/mtd/devices/Makefile @@ -19,5 +19,6 @@ obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o obj-$(CONFIG_MTD_M25P80) += m25p80.o obj-$(CONFIG_MTD_SPEAR_SMI) += spear_smi.o obj-$(CONFIG_MTD_SST25L) += sst25l.o +obj-$(CONFIG_MTD_BCM47XXSFLASH) += bcm47xxsflash.o CFLAGS_docg3.o += -I$(src)
\ No newline at end of file diff --git a/drivers/mtd/devices/bcm47xxsflash.c b/drivers/mtd/devices/bcm47xxsflash.c new file mode 100644 index 0000000..2dc5a6f --- /dev/null +++ b/drivers/mtd/devices/bcm47xxsflash.c @@ -0,0 +1,105 @@ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/mtd/mtd.h> +#include <linux/platform_device.h> +#include <linux/bcma/bcma.h> + +MODULE_LICENSE("GPL"); +MODULE_DESCRIPTION("Serial flash driver for BCMA bus"); + +static const char *probes[] = { "bcm47xxpart", NULL }; + +static int bcm47xxsflash_read(struct mtd_info *mtd, loff_t from, size_t len, + size_t *retlen, u_char *buf) +{ + struct bcma_sflash *sflash = mtd->priv; + + /* Check address range */ + if ((from + len) > mtd->size) + return -EINVAL; + + memcpy_fromio(buf, (void __iomem *)KSEG0ADDR(sflash->window + from), + len); + + return len; +} + +static void bcm47xxsflash_fill_mtd(struct bcma_sflash *sflash, + struct mtd_info *mtd) +{ + mtd->priv = sflash; + mtd->name = "bcm47xxsflash"; + mtd->owner = THIS_MODULE; + mtd->type = MTD_ROM; + mtd->size = sflash->size; + mtd->_read = bcm47xxsflash_read; + + /* TODO: implement writing support and verify/change following code */ + mtd->flags = MTD_CAP_ROM; + mtd->writebufsize = mtd->writesize = 1; +} + +static int bcm47xxsflash_probe(struct platform_device *pdev) +{ + struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev); + int err; + + sflash->mtd = kzalloc(sizeof(struct mtd_info), GFP_KERNEL); + if (!sflash->mtd) { + err = -ENOMEM; + goto out; + } + bcm47xxsflash_fill_mtd(sflash, sflash->mtd); + + err = mtd_device_parse_register(sflash->mtd, probes, NULL, NULL, 0); + if (err) { + pr_err("Failed to register MTD device: %d\n", err); + goto err_dev_reg; + } + + return 0; + +err_dev_reg: + kfree(sflash->mtd); +out: + return err; +} + +static int __devexit bcm47xxsflash_remove(struct platform_device *pdev) +{ + struct bcma_sflash *sflash = dev_get_platdata(&pdev->dev); + + mtd_device_unregister(sflash->mtd); + kfree(sflash->mtd); + + return 0; +} + +static struct platform_driver bcma_sflash_driver = { + .remove = __devexit_p(bcm47xxsflash_remove), + .driver = { + .name = "bcma_sflash", + .owner = THIS_MODULE, + }, +}; + +static int __init bcm47xxsflash_init(void) +{ + int err; + + err = platform_driver_probe(&bcma_sflash_driver, bcm47xxsflash_probe); + if (err) + pr_err("Failed to register BCMA serial flash driver: %d\n", + err); + + return err; +} + +static void __exit bcm47xxsflash_exit(void) +{ + platform_driver_unregister(&bcma_sflash_driver); +} + +module_init(bcm47xxsflash_init); +module_exit(bcm47xxsflash_exit); diff --git a/drivers/mtd/devices/doc2001plus.c b/drivers/mtd/devices/doc2001plus.c index 04eb2e4..4f2220a 100644 --- a/drivers/mtd/devices/doc2001plus.c +++ b/drivers/mtd/devices/doc2001plus.c @@ -659,23 +659,15 @@ static int doc_read(struct mtd_info *mtd, loff_t from, size_t len, #ifdef ECC_DEBUG printk("%s(%d): Millennium Plus ECC error (from=0x%x:\n", __FILE__, __LINE__, (int)from); - printk(" syndrome= %02x:%02x:%02x:%02x:%02x:" - "%02x\n", - syndrome[0], syndrome[1], syndrome[2], - syndrome[3], syndrome[4], syndrome[5]); - printk(" eccbuf= %02x:%02x:%02x:%02x:%02x:" - "%02x\n", - eccbuf[0], eccbuf[1], eccbuf[2], - eccbuf[3], eccbuf[4], eccbuf[5]); + printk(" syndrome= %*phC\n", 6, syndrome); + printk(" eccbuf= %*phC\n", 6, eccbuf); #endif ret = -EIO; } } #ifdef PSYCHO_DEBUG - printk("ECC DATA at %lx: %2.2X %2.2X %2.2X %2.2X %2.2X %2.2X\n", - (long)from, eccbuf[0], eccbuf[1], eccbuf[2], eccbuf[3], - eccbuf[4], eccbuf[5]); + printk("ECC DATA at %lx: %*ph\n", (long)from, 6, eccbuf); #endif /* disable the ECC engine */ WriteDOC(DOC_ECC_DIS, docptr , Mplus_ECCConf); diff --git a/drivers/mtd/devices/docg3.c b/drivers/mtd/devices/docg3.c index f70854d..d34d83b 100644 --- a/drivers/mtd/devices/docg3.c +++ b/drivers/mtd/devices/docg3.c @@ -919,19 +919,13 @@ static int doc_read_oob(struct mtd_info *mtd, loff_t from, eccconf1 = doc_register_readb(docg3, DOC_ECCCONF1); if (nboob >= DOC_LAYOUT_OOB_SIZE) { - doc_dbg("OOB - INFO: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n", - oobbuf[0], oobbuf[1], oobbuf[2], oobbuf[3], - oobbuf[4], oobbuf[5], oobbuf[6]); + doc_dbg("OOB - INFO: %*phC\n", 7, oobbuf); doc_dbg("OOB - HAMMING: %02x\n", oobbuf[7]); - doc_dbg("OOB - BCH_ECC: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n", - oobbuf[8], oobbuf[9], oobbuf[10], oobbuf[11], - oobbuf[12], oobbuf[13], oobbuf[14]); + doc_dbg("OOB - BCH_ECC: %*phC\n", 7, oobbuf + 8); doc_dbg("OOB - UNUSED: %02x\n", oobbuf[15]); } doc_dbg("ECC checks: ECCConf1=%x\n", eccconf1); - doc_dbg("ECC HW_ECC: %02x:%02x:%02x:%02x:%02x:%02x:%02x\n", - hwecc[0], hwecc[1], hwecc[2], hwecc[3], hwecc[4], - hwecc[5], hwecc[6]); + doc_dbg("ECC HW_ECC: %*phC\n", 7, hwecc); ret = -EIO; if (is_prot_seq_error(docg3)) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index 5d0d68c..03838ba 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -633,11 +633,14 @@ static const struct spi_device_id m25p_ids[] = { { "at26df161a", INFO(0x1f4601, 0, 64 * 1024, 32, SECT_4K) }, { "at26df321", INFO(0x1f4700, 0, 64 * 1024, 64, SECT_4K) }, + { "at45db081d", INFO(0x1f2500, 0, 64 * 1024, 16, SECT_4K) }, + /* EON -- en25xxx */ { "en25f32", INFO(0x1c3116, 0, 64 * 1024, 64, SECT_4K) }, { "en25p32", INFO(0x1c2016, 0, 64 * 1024, 64, 0) }, { "en25q32b", INFO(0x1c3016, 0, 64 * 1024, 64, 0) }, { "en25p64", INFO(0x1c2017, 0, 64 * 1024, 128, 0) }, + { "en25q64", INFO(0x1c3017, 0, 64 * 1024, 128, SECT_4K) }, /* Everspin */ { "mr25h256", CAT25_INFO( 32 * 1024, 1, 256, 2) }, @@ -646,6 +649,7 @@ static const struct spi_device_id m25p_ids[] = { { "160s33b", INFO(0x898911, 0, 64 * 1024, 32, 0) }, { "320s33b", INFO(0x898912, 0, 64 * 1024, 64, 0) }, { "640s33b", INFO(0x898913, 0, 64 * 1024, 128, 0) }, + { "n25q064", INFO(0x20ba17, 0, 64 * 1024, 128, 0) }, /* Macronix */ { "mx25l2005a", INFO(0xc22012, 0, 64 * 1024, 4, SECT_4K) }, @@ -659,15 +663,15 @@ static const struct spi_device_id m25p_ids[] = { { "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, 0) }, { "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) }, + /* Micron */ + { "n25q128", INFO(0x20ba18, 0, 64 * 1024, 256, 0) }, + { "n25q256a", INFO(0x20ba19, 0, 64 * 1024, 512, SECT_4K) }, + /* Spansion -- single (large) sector size only, at least * for the chips listed here (without boot sectors). */ - { "s25sl004a", INFO(0x010212, 0, 64 * 1024, 8, 0) }, - { "s25sl008a", INFO(0x010213, 0, 64 * 1024, 16, 0) }, - { "s25sl016a", INFO(0x010214, 0, 64 * 1024, 32, 0) }, - { "s25sl032a", INFO(0x010215, 0, 64 * 1024, 64, 0) }, - { "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64, SECT_4K) }, - { "s25sl064a", INFO(0x010216, 0, 64 * 1024, 128, 0) }, + { "s25sl032p", INFO(0x010215, 0x4d00, 64 * 1024, 64, 0) }, + { "s25sl064p", INFO(0x010216, 0x4d00, 64 * 1024, 128, 0) }, { "s25fl256s0", INFO(0x010219, 0x4d00, 256 * 1024, 128, 0) }, { "s25fl256s1", INFO(0x010219, 0x4d01, 64 * 1024, 512, 0) }, { "s25fl512s", INFO(0x010220, 0x4d00, 256 * 1024, 256, 0) }, @@ -676,6 +680,11 @@ static const struct spi_device_id m25p_ids[] = { { "s25sl12801", INFO(0x012018, 0x0301, 64 * 1024, 256, 0) }, { "s25fl129p0", INFO(0x012018, 0x4d00, 256 * 1024, 64, 0) }, { "s25fl129p1", INFO(0x012018, 0x4d01, 64 * 1024, 256, 0) }, + { "s25sl004a", INFO(0x010212, 0, 64 * 1024, 8, 0) }, + { "s25sl008a", INFO(0x010213, 0, 64 * 1024, 16, 0) }, + { "s25sl016a", INFO(0x010214, 0, 64 * 1024, 32, 0) }, + { "s25sl032a", INFO(0x010215, 0, 64 * 1024, 64, 0) }, + { "s25sl064a", INFO(0x010216, 0, 64 * 1024, 128, 0) }, { "s25fl016k", INFO(0xef4015, 0, 64 * 1024, 32, SECT_4K) }, { "s25fl064k", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) }, @@ -699,6 +708,7 @@ static const struct spi_device_id m25p_ids[] = { { "m25p32", INFO(0x202016, 0, 64 * 1024, 64, 0) }, { "m25p64", INFO(0x202017, 0, 64 * 1024, 128, 0) }, { "m25p128", INFO(0x202018, 0, 256 * 1024, 64, 0) }, + { "n25q032", INFO(0x20ba16, 0, 64 * 1024, 64, 0) }, { "m25p05-nonjedec", INFO(0, 0, 32 * 1024, 2, 0) }, { "m25p10-nonjedec", INFO(0, 0, 32 * 1024, 4, 0) }, @@ -714,6 +724,7 @@ static const struct spi_device_id m25p_ids[] = { { "m45pe80", INFO(0x204014, 0, 64 * 1024, 16, 0) }, { "m45pe16", INFO(0x204015, 0, 64 * 1024, 32, 0) }, + { "m25pe20", INFO(0x208012, 0, 64 * 1024, 4, 0) }, { "m25pe80", INFO(0x208014, 0, 64 * 1024, 16, 0) }, { "m25pe16", INFO(0x208015, 0, 64 * 1024, 32, SECT_4K) }, @@ -730,6 +741,7 @@ static const struct spi_device_id m25p_ids[] = { { "w25x16", INFO(0xef3015, 0, 64 * 1024, 32, SECT_4K) }, { "w25x32", INFO(0xef3016, 0, 64 * 1024, 64, SECT_4K) }, { "w25q32", INFO(0xef4016, 0, 64 * 1024, 64, SECT_4K) }, + { "w25q32dw", INFO(0xef6016, 0, 64 * 1024, 64, SECT_4K) }, { "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) }, { "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) }, { "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) }, diff --git a/drivers/mtd/devices/spear_smi.c b/drivers/mtd/devices/spear_smi.c index 6796036..dcc3c95 100644 --- a/drivers/mtd/devices/spear_smi.c +++ b/drivers/mtd/devices/spear_smi.c @@ -26,6 +26,7 @@ #include <linux/module.h> #include <linux/param.h> #include <linux/platform_device.h> +#include <linux/pm.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/spear_smi.h> @@ -240,8 +241,8 @@ static int spear_smi_read_sr(struct spear_smi *dev, u32 bank) /* copy dev->status (lower 16 bits) in order to release lock */ if (ret > 0) ret = dev->status & 0xffff; - else - ret = -EIO; + else if (ret == 0) + ret = -ETIMEDOUT; /* restore the ctrl regs state */ writel(ctrlreg1, dev->io_base + SMI_CR1); @@ -269,16 +270,19 @@ static int spear_smi_wait_till_ready(struct spear_smi *dev, u32 bank, finish = jiffies + timeout; do { status = spear_smi_read_sr(dev, bank); - if (status < 0) - continue; /* try till timeout */ - else if (!(status & SR_WIP)) + if (status < 0) { + if (status == -ETIMEDOUT) + continue; /* try till finish */ + return status; + } else if (!(status & SR_WIP)) { return 0; + } cond_resched(); } while (!time_after_eq(jiffies, finish)); dev_err(&dev->pdev->dev, "smi controller is busy, timeout\n"); - return status; + return -EBUSY; } /** @@ -335,6 +339,9 @@ static void spear_smi_hw_init(struct spear_smi *dev) val = HOLD1 | BANK_EN | DSEL_TIME | (prescale << 8); mutex_lock(&dev->lock); + /* clear all interrupt conditions */ + writel(0, dev->io_base + SMI_SR); + writel(val, dev->io_base + SMI_CR1); mutex_unlock(&dev->lock); } @@ -391,11 +398,11 @@ static int spear_smi_write_enable(struct spear_smi *dev, u32 bank) writel(ctrlreg1, dev->io_base + SMI_CR1); writel(0, dev->io_base + SMI_CR2); - if (ret <= 0) { + if (ret == 0) { ret = -EIO; dev_err(&dev->pdev->dev, "smi controller failed on write enable\n"); - } else { + } else if (ret > 0) { /* check whether write mode status is set for required bank */ if (dev->status & (1 << (bank + WM_SHIFT))) ret = 0; @@ -462,10 +469,10 @@ static int spear_smi_erase_sector(struct spear_smi *dev, ret = wait_event_interruptible_timeout(dev->cmd_complete, dev->status & TFF, SMI_CMD_TIMEOUT); - if (ret <= 0) { + if (ret == 0) { ret = -EIO; dev_err(&dev->pdev->dev, "sector erase failed\n"); - } else + } else if (ret > 0) ret = 0; /* success */ /* restore ctrl regs */ @@ -820,7 +827,7 @@ static int spear_smi_setup_banks(struct platform_device *pdev, if (!flash_info) return -ENODEV; - flash = kzalloc(sizeof(*flash), GFP_ATOMIC); + flash = devm_kzalloc(&pdev->dev, sizeof(*flash), GFP_ATOMIC); if (!flash) return -ENOMEM; flash->bank = bank; @@ -831,15 +838,13 @@ static int spear_smi_setup_banks(struct platform_device *pdev, flash_index = spear_smi_probe_flash(dev, bank); if (flash_index < 0) { dev_info(&dev->pdev->dev, "smi-nor%d not found\n", bank); - ret = flash_index; - goto err_probe; + return flash_index; } /* map the memory for nor flash chip */ - flash->base_addr = ioremap(flash_info->mem_base, flash_info->size); - if (!flash->base_addr) { - ret = -EIO; - goto err_probe; - } + flash->base_addr = devm_ioremap(&pdev->dev, flash_info->mem_base, + flash_info->size); + if (!flash->base_addr) + return -EIO; dev->flash[bank] = flash; flash->mtd.priv = dev; @@ -881,17 +886,10 @@ static int spear_smi_setup_banks(struct platform_device *pdev, count); if (ret) { dev_err(&dev->pdev->dev, "Err MTD partition=%d\n", ret); - goto err_map; + return ret; } return 0; - -err_map: - iounmap(flash->base_addr); - -err_probe: - kfree(flash); - return ret; } /** @@ -928,20 +926,13 @@ static int __devinit spear_smi_probe(struct platform_device *pdev) } } else { pdata = dev_get_platdata(&pdev->dev); - if (pdata < 0) { + if (!pdata) { ret = -ENODEV; dev_err(&pdev->dev, "no platform data\n"); goto err; } } - smi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!smi_base) { - ret = -ENODEV; - dev_err(&pdev->dev, "invalid smi base address\n"); - goto err; - } - irq = platform_get_irq(pdev, 0); if (irq < 0) { ret = -ENODEV; @@ -949,32 +940,26 @@ static int __devinit spear_smi_probe(struct platform_device *pdev) goto err; } - dev = kzalloc(sizeof(*dev), GFP_ATOMIC); + dev = devm_kzalloc(&pdev->dev, sizeof(*dev), GFP_ATOMIC); if (!dev) { ret = -ENOMEM; dev_err(&pdev->dev, "mem alloc fail\n"); goto err; } - smi_base = request_mem_region(smi_base->start, resource_size(smi_base), - pdev->name); - if (!smi_base) { - ret = -EBUSY; - dev_err(&pdev->dev, "request mem region fail\n"); - goto err_mem; - } + smi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0); - dev->io_base = ioremap(smi_base->start, resource_size(smi_base)); + dev->io_base = devm_request_and_ioremap(&pdev->dev, smi_base); if (!dev->io_base) { ret = -EIO; - dev_err(&pdev->dev, "ioremap fail\n"); - goto err_ioremap; + dev_err(&pdev->dev, "devm_request_and_ioremap fail\n"); + goto err; } dev->pdev = pdev; dev->clk_rate = pdata->clk_rate; - if (dev->clk_rate < 0 || dev->clk_rate > SMI_MAX_CLOCK_FREQ) + if (dev->clk_rate > SMI_MAX_CLOCK_FREQ) dev->clk_rate = SMI_MAX_CLOCK_FREQ; dev->num_flashes = pdata->num_flashes; @@ -984,17 +969,18 @@ static int __devinit spear_smi_probe(struct platform_device *pdev) dev->num_flashes = MAX_NUM_FLASH_CHIP; } - dev->clk = clk_get(&pdev->dev, NULL); + dev->clk = devm_clk_get(&pdev->dev, NULL); if (IS_ERR(dev->clk)) { ret = PTR_ERR(dev->clk); - goto err_clk; + goto err; } ret = clk_prepare_enable(dev->clk); if (ret) - goto err_clk_prepare_enable; + goto err; - ret = request_irq(irq, spear_smi_int_handler, 0, pdev->name, dev); + ret = devm_request_irq(&pdev->dev, irq, spear_smi_int_handler, 0, + pdev->name, dev); if (ret) { dev_err(&dev->pdev->dev, "SMI IRQ allocation failed\n"); goto err_irq; @@ -1017,18 +1003,9 @@ static int __devinit spear_smi_probe(struct platform_device *pdev) return 0; err_bank_setup: - free_irq(irq, dev); platform_set_drvdata(pdev, NULL); err_irq: clk_disable_unprepare(dev->clk); -err_clk_prepare_enable: - clk_put(dev->clk); -err_clk: - iounmap(dev->io_base); -err_ioremap: - release_mem_region(smi_base->start, resource_size(smi_base)); -err_mem: - kfree(dev); err: return ret; } @@ -1042,11 +1019,8 @@ err: static int __devexit spear_smi_remove(struct platform_device *pdev) { struct spear_smi *dev; - struct spear_smi_plat_data *pdata; struct spear_snor_flash *flash; - struct resource *smi_base; - int ret; - int i, irq; + int ret, i; dev = platform_get_drvdata(pdev); if (!dev) { @@ -1054,8 +1028,6 @@ static int __devexit spear_smi_remove(struct platform_device *pdev) return -ENODEV; } - pdata = dev_get_platdata(&pdev->dev); - /* clean up for all nor flash */ for (i = 0; i < dev->num_flashes; i++) { flash = dev->flash[i]; @@ -1066,49 +1038,41 @@ static int __devexit spear_smi_remove(struct platform_device *pdev) ret = mtd_device_unregister(&flash->mtd); if (ret) dev_err(&pdev->dev, "error removing mtd\n"); - - iounmap(flash->base_addr); - kfree(flash); } - irq = platform_get_irq(pdev, 0); - free_irq(irq, dev); - clk_disable_unprepare(dev->clk); - clk_put(dev->clk); - iounmap(dev->io_base); - kfree(dev); - - smi_base = platform_get_resource(pdev, IORESOURCE_MEM, 0); - release_mem_region(smi_base->start, resource_size(smi_base)); platform_set_drvdata(pdev, NULL); return 0; } -int spear_smi_suspend(struct platform_device *pdev, pm_message_t state) +#ifdef CONFIG_PM +static int spear_smi_suspend(struct device *dev) { - struct spear_smi *dev = platform_get_drvdata(pdev); + struct spear_smi *sdev = dev_get_drvdata(dev); - if (dev && dev->clk) - clk_disable_unprepare(dev->clk); + if (sdev && sdev->clk) + clk_disable_unprepare(sdev->clk); return 0; } -int spear_smi_resume(struct platform_device *pdev) +static int spear_smi_resume(struct device *dev) { - struct spear_smi *dev = platform_get_drvdata(pdev); + struct spear_smi *sdev = dev_get_drvdata(dev); int ret = -EPERM; - if (dev && dev->clk) - ret = clk_prepare_enable(dev->clk); + if (sdev && sdev->clk) + ret = clk_prepare_enable(sdev->clk); if (!ret) - spear_smi_hw_init(dev); + spear_smi_hw_init(sdev); return ret; } +static SIMPLE_DEV_PM_OPS(spear_smi_pm_ops, spear_smi_suspend, spear_smi_resume); +#endif + #ifdef CONFIG_OF static const struct of_device_id spear_smi_id_table[] = { { .compatible = "st,spear600-smi" }, @@ -1123,11 +1087,12 @@ static struct platform_driver spear_smi_driver = { .bus = &platform_bus_type, .owner = THIS_MODULE, .of_match_table = of_match_ptr(spear_smi_id_table), +#ifdef CONFIG_PM + .pm = &spear_smi_pm_ops, +#endif }, .probe = spear_smi_probe, .remove = __devexit_p(spear_smi_remove), - .suspend = spear_smi_suspend, - .resume = spear_smi_resume, }; static int spear_smi_init(void) diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 5ba2458..2e47c2e 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -373,7 +373,7 @@ config MTD_FORTUNET have such a board, say 'Y'. config MTD_AUTCPU12 - tristate "NV-RAM mapping AUTCPU12 board" + bool "NV-RAM mapping AUTCPU12 board" depends on ARCH_AUTCPU12 help This enables access to the NV-RAM on autronix autcpu12 board. @@ -443,22 +443,10 @@ config MTD_GPIO_ADDR config MTD_UCLINUX bool "Generic uClinux RAM/ROM filesystem support" - depends on MTD_RAM=y && !MMU + depends on MTD_RAM=y && (!MMU || COLDFIRE) help Map driver to support image based filesystems for uClinux. -config MTD_WRSBC8260 - tristate "Map driver for WindRiver PowerQUICC II MPC82xx board" - depends on (SBC82xx || SBC8560) - select MTD_MAP_BANK_WIDTH_4 - select MTD_MAP_BANK_WIDTH_1 - select MTD_CFI_I1 - select MTD_CFI_I4 - help - Map driver for WindRiver PowerQUICC II MPC82xx board. Drives - all three flash regions on CS0, CS1 and CS6 if they are configured - correctly by the boot loader. - config MTD_DMV182 tristate "Map driver for Dy-4 SVME/DMV-182 board." depends on DMV182 diff --git a/drivers/mtd/maps/Makefile b/drivers/mtd/maps/Makefile index 68a9a91..deb43e9 100644 --- a/drivers/mtd/maps/Makefile +++ b/drivers/mtd/maps/Makefile @@ -47,7 +47,6 @@ obj-$(CONFIG_MTD_SCB2_FLASH) += scb2_flash.o obj-$(CONFIG_MTD_H720X) += h720x-flash.o obj-$(CONFIG_MTD_IXP4XX) += ixp4xx.o obj-$(CONFIG_MTD_IXP2000) += ixp2000.o -obj-$(CONFIG_MTD_WRSBC8260) += wr_sbc82xx_flash.o obj-$(CONFIG_MTD_DMV182) += dmv182.o obj-$(CONFIG_MTD_PLATRAM) += plat-ram.o obj-$(CONFIG_MTD_INTEL_VR_NOR) += intel_vr_nor.o diff --git a/drivers/mtd/maps/autcpu12-nvram.c b/drivers/mtd/maps/autcpu12-nvram.c index e5bfd0e..76fb594 100644 --- a/drivers/mtd/maps/autcpu12-nvram.c +++ b/drivers/mtd/maps/autcpu12-nvram.c @@ -15,43 +15,54 @@ * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * */ +#include <linux/sizes.h> -#include <linux/module.h> #include <linux/types.h> #include <linux/kernel.h> -#include <linux/ioport.h> #include <linux/init.h> -#include <asm/io.h> -#include <asm/sizes.h> -#include <mach/hardware.h> -#include <mach/autcpu12.h> +#include <linux/device.h> +#include <linux/module.h> +#include <linux/platform_device.h> + #include <linux/mtd/mtd.h> #include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> - - -static struct mtd_info *sram_mtd; -struct map_info autcpu12_sram_map = { - .name = "SRAM", - .size = 32768, - .bankwidth = 4, - .phys = 0x12000000, +struct autcpu12_nvram_priv { + struct mtd_info *mtd; + struct map_info map; }; -static int __init init_autcpu12_sram (void) +static int __devinit autcpu12_nvram_probe(struct platform_device *pdev) { - int err, save0, save1; + map_word tmp, save0, save1; + struct resource *res; + struct autcpu12_nvram_priv *priv; - autcpu12_sram_map.virt = ioremap(0x12000000, SZ_128K); - if (!autcpu12_sram_map.virt) { - printk("Failed to ioremap autcpu12 NV-RAM space\n"); - err = -EIO; - goto out; + priv = devm_kzalloc(&pdev->dev, + sizeof(struct autcpu12_nvram_priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + platform_set_drvdata(pdev, priv); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) { + dev_err(&pdev->dev, "failed to get memory resource\n"); + return -ENOENT; + } + + priv->map.bankwidth = 4; + priv->map.phys = res->start; + priv->map.size = resource_size(res); + priv->map.virt = devm_request_and_ioremap(&pdev->dev, res); + strcpy((char *)priv->map.name, res->name); + if (!priv->map.virt) { + dev_err(&pdev->dev, "failed to remap mem resource\n"); + return -EBUSY; } - simple_map_init(&autcpu_sram_map); + + simple_map_init(&priv->map); /* * Check for 32K/128K @@ -61,65 +72,59 @@ static int __init init_autcpu12_sram (void) * Read and check result on ofs 0x0 * Restore contents */ - save0 = map_read32(&autcpu12_sram_map,0); - save1 = map_read32(&autcpu12_sram_map,0x10000); - map_write32(&autcpu12_sram_map,~save0,0x10000); - /* if we find this pattern on 0x0, we have 32K size - * restore contents and exit - */ - if ( map_read32(&autcpu12_sram_map,0) != save0) { - map_write32(&autcpu12_sram_map,save0,0x0); - goto map; + save0 = map_read(&priv->map, 0); + save1 = map_read(&priv->map, 0x10000); + tmp.x[0] = ~save0.x[0]; + map_write(&priv->map, tmp, 0x10000); + tmp = map_read(&priv->map, 0); + /* if we find this pattern on 0x0, we have 32K size */ + if (!map_word_equal(&priv->map, tmp, save0)) { + map_write(&priv->map, save0, 0x0); + priv->map.size = SZ_32K; + } else + map_write(&priv->map, save1, 0x10000); + + priv->mtd = do_map_probe("map_ram", &priv->map); + if (!priv->mtd) { + dev_err(&pdev->dev, "probing failed\n"); + return -ENXIO; } - /* We have a 128K found, restore 0x10000 and set size - * to 128K - */ - map_write32(&autcpu12_sram_map,save1,0x10000); - autcpu12_sram_map.size = SZ_128K; - -map: - sram_mtd = do_map_probe("map_ram", &autcpu12_sram_map); - if (!sram_mtd) { - printk("NV-RAM probe failed\n"); - err = -ENXIO; - goto out_ioremap; - } - - sram_mtd->owner = THIS_MODULE; - sram_mtd->erasesize = 16; - if (mtd_device_register(sram_mtd, NULL, 0)) { - printk("NV-RAM device addition failed\n"); - err = -ENOMEM; - goto out_probe; + priv->mtd->owner = THIS_MODULE; + priv->mtd->erasesize = 16; + priv->mtd->dev.parent = &pdev->dev; + if (!mtd_device_register(priv->mtd, NULL, 0)) { + dev_info(&pdev->dev, + "NV-RAM device size %ldKiB registered on AUTCPU12\n", + priv->map.size / SZ_1K); + return 0; } - printk("NV-RAM device size %ldKiB registered on AUTCPU12\n",autcpu12_sram_map.size/SZ_1K); - - return 0; - -out_probe: - map_destroy(sram_mtd); - sram_mtd = 0; - -out_ioremap: - iounmap((void *)autcpu12_sram_map.virt); -out: - return err; + map_destroy(priv->mtd); + dev_err(&pdev->dev, "NV-RAM device addition failed\n"); + return -ENOMEM; } -static void __exit cleanup_autcpu12_maps(void) +static int __devexit autcpu12_nvram_remove(struct platform_device *pdev) { - if (sram_mtd) { - mtd_device_unregister(sram_mtd); - map_destroy(sram_mtd); - iounmap((void *)autcpu12_sram_map.virt); - } + struct autcpu12_nvram_priv *priv = platform_get_drvdata(pdev); + + mtd_device_unregister(priv->mtd); + map_destroy(priv->mtd); + + return 0; } -module_init(init_autcpu12_sram); -module_exit(cleanup_autcpu12_maps); +static struct platform_driver autcpu12_nvram_driver = { + .driver = { + .name = "autcpu12_nvram", + .owner = THIS_MODULE, + }, + .probe = autcpu12_nvram_probe, + .remove = __devexit_p(autcpu12_nvram_remove), +}; +module_platform_driver(autcpu12_nvram_driver); MODULE_AUTHOR("Thomas Gleixner"); -MODULE_DESCRIPTION("autcpu12 NV-RAM map driver"); +MODULE_DESCRIPTION("autcpu12 NVRAM map driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/mtd/maps/pci.c b/drivers/mtd/maps/pci.c index f14ce0a..1c30c1a 100644 --- a/drivers/mtd/maps/pci.c +++ b/drivers/mtd/maps/pci.c @@ -43,26 +43,14 @@ static map_word mtd_pci_read8(struct map_info *_map, unsigned long ofs) struct map_pci_info *map = (struct map_pci_info *)_map; map_word val; val.x[0]= readb(map->base + map->translate(map, ofs)); -// printk("read8 : %08lx => %02x\n", ofs, val.x[0]); return val; } -#if 0 -static map_word mtd_pci_read16(struct map_info *_map, unsigned long ofs) -{ - struct map_pci_info *map = (struct map_pci_info *)_map; - map_word val; - val.x[0] = readw(map->base + map->translate(map, ofs)); -// printk("read16: %08lx => %04x\n", ofs, val.x[0]); - return val; -} -#endif static map_word mtd_pci_read32(struct map_info *_map, unsigned long ofs) { struct map_pci_info *map = (struct map_pci_info *)_map; map_word val; val.x[0] = readl(map->base + map->translate(map, ofs)); -// printk("read32: %08lx => %08x\n", ofs, val.x[0]); return val; } @@ -75,22 +63,12 @@ static void mtd_pci_copyfrom(struct map_info *_map, void *to, unsigned long from static void mtd_pci_write8(struct map_info *_map, map_word val, unsigned long ofs) { struct map_pci_info *map = (struct map_pci_info *)_map; -// printk("write8 : %08lx <= %02x\n", ofs, val.x[0]); writeb(val.x[0], map->base + map->translate(map, ofs)); } -#if 0 -static void mtd_pci_write16(struct map_info *_map, map_word val, unsigned long ofs) -{ - struct map_pci_info *map = (struct map_pci_info *)_map; -// printk("write16: %08lx <= %04x\n", ofs, val.x[0]); - writew(val.x[0], map->base + map->translate(map, ofs)); -} -#endif static void mtd_pci_write32(struct map_info *_map, map_word val, unsigned long ofs) { struct map_pci_info *map = (struct map_pci_info *)_map; -// printk("write32: %08lx <= %08x\n", ofs, val.x[0]); writel(val.x[0], map->base + map->translate(map, ofs)); } @@ -358,4 +336,3 @@ MODULE_LICENSE("GPL"); MODULE_AUTHOR("Russell King <rmk@arm.linux.org.uk>"); MODULE_DESCRIPTION("Generic PCI map driver"); MODULE_DEVICE_TABLE(pci, mtd_pci_ids); - diff --git a/drivers/mtd/maps/physmap_of.c b/drivers/mtd/maps/physmap_of.c index 2e6fb68..6f19aca 100644 --- a/drivers/mtd/maps/physmap_of.c +++ b/drivers/mtd/maps/physmap_of.c @@ -169,6 +169,7 @@ static int __devinit of_flash_probe(struct platform_device *dev) struct mtd_info **mtd_list = NULL; resource_size_t res_size; struct mtd_part_parser_data ppdata; + bool map_indirect; match = of_match_device(of_flash_match, &dev->dev); if (!match) @@ -192,6 +193,8 @@ static int __devinit of_flash_probe(struct platform_device *dev) } count /= reg_tuple_size; + map_indirect = of_property_read_bool(dp, "no-unaligned-direct-access"); + err = -ENOMEM; info = kzalloc(sizeof(struct of_flash) + sizeof(struct of_flash_list) * count, GFP_KERNEL); @@ -247,6 +250,17 @@ static int __devinit of_flash_probe(struct platform_device *dev) simple_map_init(&info->list[i].map); + /* + * On some platforms (e.g. MPC5200) a direct 1:1 mapping + * may cause problems with JFFS2 usage, as the local bus (LPB) + * doesn't support unaligned accesses as implemented in the + * JFFS2 code via memcpy(). By setting NO_XIP, the + * flash will not be exposed directly to the MTD users + * (e.g. JFFS2) any more. + */ + if (map_indirect) + info->list[i].map.phys = NO_XIP; + if (probe_type) { info->list[i].mtd = do_map_probe(probe_type, &info->list[i].map); diff --git a/drivers/mtd/maps/rbtx4939-flash.c b/drivers/mtd/maps/rbtx4939-flash.c index 6f52e1f..49c3fe7 100644 --- a/drivers/mtd/maps/rbtx4939-flash.c +++ b/drivers/mtd/maps/rbtx4939-flash.c @@ -100,8 +100,6 @@ static int rbtx4939_flash_probe(struct platform_device *dev) goto err_out; } info->mtd->owner = THIS_MODULE; - if (err) - goto err_out; err = mtd_device_parse_register(info->mtd, NULL, NULL, pdata->parts, pdata->nr_parts); diff --git a/drivers/mtd/maps/uclinux.c b/drivers/mtd/maps/uclinux.c index c3bb304..299bf88 100644 --- a/drivers/mtd/maps/uclinux.c +++ b/drivers/mtd/maps/uclinux.c @@ -67,10 +67,16 @@ static int __init uclinux_mtd_init(void) printk("uclinux[mtd]: RAM probe address=0x%x size=0x%x\n", (int) mapp->phys, (int) mapp->size); - mapp->virt = ioremap_nocache(mapp->phys, mapp->size); + /* + * The filesystem is guaranteed to be in direct mapped memory. It is + * directly following the kernels own bss region. Following the same + * mechanism used by architectures setting up traditional initrds we + * use phys_to_virt to get the virtual address of its start. + */ + mapp->virt = phys_to_virt(mapp->phys); if (mapp->virt == 0) { - printk("uclinux[mtd]: ioremap_nocache() failed\n"); + printk("uclinux[mtd]: no virtual mapping?\n"); return(-EIO); } @@ -79,7 +85,6 @@ static int __init uclinux_mtd_init(void) mtd = do_map_probe("map_ram", mapp); if (!mtd) { printk("uclinux[mtd]: failed to find a mapping?\n"); - iounmap(mapp->virt); return(-ENXIO); } @@ -102,10 +107,8 @@ static void __exit uclinux_mtd_cleanup(void) map_destroy(uclinux_ram_mtdinfo); uclinux_ram_mtdinfo = NULL; } - if (uclinux_ram_map.virt) { - iounmap((void *) uclinux_ram_map.virt); + if (uclinux_ram_map.virt) uclinux_ram_map.virt = 0; - } } /****************************************************************************/ diff --git a/drivers/mtd/maps/wr_sbc82xx_flash.c b/drivers/mtd/maps/wr_sbc82xx_flash.c deleted file mode 100644 index e7534c8..0000000 --- a/drivers/mtd/maps/wr_sbc82xx_flash.c +++ /dev/null @@ -1,174 +0,0 @@ -/* - * Map for flash chips on Wind River PowerQUICC II SBC82xx board. - * - * Copyright (C) 2004 Red Hat, Inc. - * - * Author: David Woodhouse <dwmw2@infradead.org> - * - */ - -#include <linux/module.h> -#include <linux/types.h> -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/slab.h> -#include <asm/io.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> - -#include <asm/immap_cpm2.h> - -static struct mtd_info *sbcmtd[3]; - -struct map_info sbc82xx_flash_map[3] = { - {.name = "Boot flash"}, - {.name = "Alternate boot flash"}, - {.name = "User flash"} -}; - -static struct mtd_partition smallflash_parts[] = { - { - .name = "space", - .size = 0x100000, - .offset = 0, - }, { - .name = "bootloader", - .size = MTDPART_SIZ_FULL, - .offset = MTDPART_OFS_APPEND, - } -}; - -static struct mtd_partition bigflash_parts[] = { - { - .name = "bootloader", - .size = 0x00100000, - .offset = 0, - }, { - .name = "file system", - .size = 0x01f00000, - .offset = MTDPART_OFS_APPEND, - }, { - .name = "boot config", - .size = 0x00100000, - .offset = MTDPART_OFS_APPEND, - }, { - .name = "space", - .size = 0x01f00000, - .offset = MTDPART_OFS_APPEND, - } -}; - -static const char *part_probes[] __initconst = {"cmdlinepart", "RedBoot", NULL}; - -#define init_sbc82xx_one_flash(map, br, or) \ -do { \ - (map).phys = (br & 1) ? (br & 0xffff8000) : 0; \ - (map).size = (br & 1) ? (~(or & 0xffff8000) + 1) : 0; \ - switch (br & 0x00001800) { \ - case 0x00000000: \ - case 0x00000800: (map).bankwidth = 1; break; \ - case 0x00001000: (map).bankwidth = 2; break; \ - case 0x00001800: (map).bankwidth = 4; break; \ - } \ -} while (0); - -static int __init init_sbc82xx_flash(void) -{ - volatile memctl_cpm2_t *mc = &cpm2_immr->im_memctl; - int bigflash; - int i; - -#ifdef CONFIG_SBC8560 - mc = ioremap(0xff700000 + 0x5000, sizeof(memctl_cpm2_t)); -#else - mc = &cpm2_immr->im_memctl; -#endif - - bigflash = 1; - if ((mc->memc_br0 & 0x00001800) == 0x00001800) - bigflash = 0; - - init_sbc82xx_one_flash(sbc82xx_flash_map[0], mc->memc_br0, mc->memc_or0); - init_sbc82xx_one_flash(sbc82xx_flash_map[1], mc->memc_br6, mc->memc_or6); - init_sbc82xx_one_flash(sbc82xx_flash_map[2], mc->memc_br1, mc->memc_or1); - -#ifdef CONFIG_SBC8560 - iounmap((void *) mc); -#endif - - for (i=0; i<3; i++) { - int8_t flashcs[3] = { 0, 6, 1 }; - int nr_parts; - struct mtd_partition *defparts; - - printk(KERN_NOTICE "PowerQUICC II %s (%ld MiB on CS%d", - sbc82xx_flash_map[i].name, - (sbc82xx_flash_map[i].size >> 20), - flashcs[i]); - if (!sbc82xx_flash_map[i].phys) { - /* We know it can't be at zero. */ - printk("): disabled by bootloader.\n"); - continue; - } - printk(" at %08lx)\n", sbc82xx_flash_map[i].phys); - - sbc82xx_flash_map[i].virt = ioremap(sbc82xx_flash_map[i].phys, - sbc82xx_flash_map[i].size); - - if (!sbc82xx_flash_map[i].virt) { - printk("Failed to ioremap\n"); - continue; - } - - simple_map_init(&sbc82xx_flash_map[i]); - - sbcmtd[i] = do_map_probe("cfi_probe", &sbc82xx_flash_map[i]); - - if (!sbcmtd[i]) - continue; - - sbcmtd[i]->owner = THIS_MODULE; - - /* No partitioning detected. Use default */ - if (i == 2) { - defparts = NULL; - nr_parts = 0; - } else if (i == bigflash) { - defparts = bigflash_parts; - nr_parts = ARRAY_SIZE(bigflash_parts); - } else { - defparts = smallflash_parts; - nr_parts = ARRAY_SIZE(smallflash_parts); - } - - mtd_device_parse_register(sbcmtd[i], part_probes, NULL, - defparts, nr_parts); - } - return 0; -} - -static void __exit cleanup_sbc82xx_flash(void) -{ - int i; - - for (i=0; i<3; i++) { - if (!sbcmtd[i]) - continue; - - mtd_device_unregister(sbcmtd[i]); - - map_destroy(sbcmtd[i]); - - iounmap((void *)sbc82xx_flash_map[i].virt); - sbc82xx_flash_map[i].virt = 0; - } -} - -module_init(init_sbc82xx_flash); -module_exit(cleanup_sbc82xx_flash); - - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("David Woodhouse <dwmw2@infradead.org>"); -MODULE_DESCRIPTION("Flash map driver for WindRiver PowerQUICC II"); diff --git a/drivers/mtd/mtdchar.c b/drivers/mtd/mtdchar.c index 73ae81a..82c0616 100644 --- a/drivers/mtd/mtdchar.c +++ b/drivers/mtd/mtdchar.c @@ -1162,7 +1162,11 @@ static int mtdchar_mmap(struct file *file, struct vm_area_struct *vma) resource_size_t start, off; unsigned long len, vma_len; - if (mtd->type == MTD_RAM || mtd->type == MTD_ROM) { + /* This is broken because it assumes the MTD device is map-based + and that mtd->priv is a valid struct map_info. It should be + replaced with something that uses the mtd_get_unmapped_area() + operation properly. */ + if (0 /*mtd->type == MTD_RAM || mtd->type == MTD_ROM*/) { off = get_vm_offset(vma); start = map->phys; len = PAGE_ALIGN((start & ~PAGE_MASK) + map->size); diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index b9adff5..374c46d 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -858,6 +858,27 @@ int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, } EXPORT_SYMBOL_GPL(mtd_panic_write); +int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops) +{ + int ret_code; + ops->retlen = ops->oobretlen = 0; + if (!mtd->_read_oob) + return -EOPNOTSUPP; + /* + * In cases where ops->datbuf != NULL, mtd->_read_oob() has semantics + * similar to mtd->_read(), returning a non-negative integer + * representing max bitflips. In other cases, mtd->_read_oob() may + * return -EUCLEAN. In all cases, perform similar logic to mtd_read(). + */ + ret_code = mtd->_read_oob(mtd, from, ops); + if (unlikely(ret_code < 0)) + return ret_code; + if (mtd->ecc_strength == 0) + return 0; /* device lacks ecc */ + return ret_code >= mtd->bitflip_threshold ? -EUCLEAN : 0; +} +EXPORT_SYMBOL_GPL(mtd_read_oob); + /* * Method to access the protection register area, present in some flash * devices. The user data is one time programmable but the factory data is read diff --git a/drivers/mtd/mtdoops.c b/drivers/mtd/mtdoops.c index 438737a..f5b3f91 100644 --- a/drivers/mtd/mtdoops.c +++ b/drivers/mtd/mtdoops.c @@ -169,14 +169,7 @@ static void mtdoops_workfunc_erase(struct work_struct *work) cxt->nextpage = 0; } - while (1) { - ret = mtd_block_isbad(mtd, cxt->nextpage * record_size); - if (!ret) - break; - if (ret < 0) { - printk(KERN_ERR "mtdoops: block_isbad failed, aborting\n"); - return; - } + while ((ret = mtd_block_isbad(mtd, cxt->nextpage * record_size)) > 0) { badblock: printk(KERN_WARNING "mtdoops: bad block at %08lx\n", cxt->nextpage * record_size); @@ -190,6 +183,11 @@ badblock: } } + if (ret < 0) { + printk(KERN_ERR "mtdoops: mtd_block_isbad failed, aborting\n"); + return; + } + for (j = 0, ret = -1; (j < 3) && (ret < 0); j++) ret = mtdoops_erase_block(cxt, cxt->nextpage * record_size); diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index 3a49e6d..70fa70a 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -711,6 +711,8 @@ static const char *default_mtd_part_types[] = { * partition parsers, specified in @types. However, if @types is %NULL, then * the default list of parsers is used. The default list contains only the * "cmdlinepart" and "ofpart" parsers ATM. + * Note: If there are more then one parser in @types, the kernel only takes the + * partitions parsed out by the first parser. * * This function may return: * o a negative error code in case of failure @@ -735,11 +737,12 @@ int parse_mtd_partitions(struct mtd_info *master, const char **types, if (!parser) continue; ret = (*parser->parse_fn)(master, pparts, data); + put_partition_parser(parser); if (ret > 0) { printk(KERN_NOTICE "%d %s partitions found on MTD device %s\n", ret, parser->name, master->name); + break; } - put_partition_parser(parser); } return ret; } diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig index 598cd0a..4883139 100644 --- a/drivers/mtd/nand/Kconfig +++ b/drivers/mtd/nand/Kconfig @@ -22,15 +22,6 @@ menuconfig MTD_NAND if MTD_NAND -config MTD_NAND_VERIFY_WRITE - bool "Verify NAND page writes" - help - This adds an extra check when data is written to the flash. The - NAND flash device internally checks only bits transitioning - from 1 to 0. There is a rare possibility that even though the - device thinks the write was successful, a bit could have been - flipped accidentally due to device wear or something else. - config MTD_NAND_BCH tristate select BCH @@ -267,22 +258,6 @@ config MTD_NAND_S3C2410_CLKSTOP when the is NAND chip selected or released, but will save approximately 5mA of power when there is nothing happening. -config MTD_NAND_BCM_UMI - tristate "NAND Flash support for BCM Reference Boards" - depends on ARCH_BCMRING - help - This enables the NAND flash controller on the BCM UMI block. - - No board specific support is done by this driver, each board - must advertise a platform_device for the driver to attach. - -config MTD_NAND_BCM_UMI_HWCS - bool "BCM UMI NAND Hardware CS" - depends on MTD_NAND_BCM_UMI - help - Enable the use of the BCM UMI block's internal CS using NAND. - This should only be used if you know the external NAND CS can toggle. - config MTD_NAND_DISKONCHIP tristate "DiskOnChip 2000, Millennium and Millennium Plus (NAND reimplementation) (EXPERIMENTAL)" depends on EXPERIMENTAL @@ -356,7 +331,7 @@ config MTD_NAND_DISKONCHIP_BBTWRITE config MTD_NAND_DOCG4 tristate "Support for DiskOnChip G4 (EXPERIMENTAL)" - depends on EXPERIMENTAL + depends on EXPERIMENTAL && HAS_IOMEM select BCH select BITREVERSE help @@ -414,6 +389,28 @@ config MTD_NAND_PXA3xx This enables the driver for the NAND flash device found on PXA3xx processors +config MTD_NAND_SLC_LPC32XX + tristate "NXP LPC32xx SLC Controller" + depends on ARCH_LPC32XX + help + Enables support for NXP's LPC32XX SLC (i.e. for Single Level Cell + chips) NAND controller. This is the default for the PHYTEC 3250 + reference board which contains a NAND256R3A2CZA6 chip. + + Please check the actual NAND chip connected and its support + by the SLC NAND controller. + +config MTD_NAND_MLC_LPC32XX + tristate "NXP LPC32xx MLC Controller" + depends on ARCH_LPC32XX + help + Uses the LPC32XX MLC (i.e. for Multi Level Cell chips) NAND + controller. This is the default for the WORK92105 controller + board. + + Please check the actual NAND chip connected and its support + by the MLC NAND controller. + config MTD_NAND_CM_X270 tristate "Support for NAND Flash on CM-X270 modules" depends on MACH_ARMCORE @@ -439,10 +436,10 @@ config MTD_NAND_NANDSIM MTD nand layer. config MTD_NAND_GPMI_NAND - bool "GPMI NAND Flash Controller driver" + tristate "GPMI NAND Flash Controller driver" depends on MTD_NAND && MXS_DMA help - Enables NAND Flash support for IMX23 or IMX28. + Enables NAND Flash support for IMX23, IMX28 or IMX6. The GPMI controller is very powerful, with the help of BCH module, it can do the hardware ECC. The GPMI supports several NAND flashs at the same time. The GPMI may conflicts with other @@ -510,7 +507,7 @@ config MTD_NAND_MPC5121_NFC config MTD_NAND_MXC tristate "MXC NAND support" - depends on IMX_HAVE_PLATFORM_MXC_NAND + depends on ARCH_MXC help This enables the driver for the NAND flash controller on the MXC processors. @@ -567,4 +564,12 @@ config MTD_NAND_FSMC Enables support for NAND Flash chips on the ST Microelectronics Flexible Static Memory Controller (FSMC) +config MTD_NAND_XWAY + tristate "Support for NAND on Lantiq XWAY SoC" + depends on LANTIQ && SOC_TYPE_XWAY + select MTD_NAND_PLATFORM + help + Enables support for NAND Flash chips on Lantiq XWAY SoCs. NAND is attached + to the External Bus Unit (EBU). + endif # MTD_NAND diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile index d4b4d87..2cbd091 100644 --- a/drivers/mtd/nand/Makefile +++ b/drivers/mtd/nand/Makefile @@ -40,16 +40,18 @@ obj-$(CONFIG_MTD_NAND_ORION) += orion_nand.o obj-$(CONFIG_MTD_NAND_FSL_ELBC) += fsl_elbc_nand.o obj-$(CONFIG_MTD_NAND_FSL_IFC) += fsl_ifc_nand.o obj-$(CONFIG_MTD_NAND_FSL_UPM) += fsl_upm.o +obj-$(CONFIG_MTD_NAND_SLC_LPC32XX) += lpc32xx_slc.o +obj-$(CONFIG_MTD_NAND_MLC_LPC32XX) += lpc32xx_mlc.o obj-$(CONFIG_MTD_NAND_SH_FLCTL) += sh_flctl.o obj-$(CONFIG_MTD_NAND_MXC) += mxc_nand.o obj-$(CONFIG_MTD_NAND_SOCRATES) += socrates_nand.o obj-$(CONFIG_MTD_NAND_TXX9NDFMC) += txx9ndfmc.o obj-$(CONFIG_MTD_NAND_NUC900) += nuc900_nand.o obj-$(CONFIG_MTD_NAND_NOMADIK) += nomadik_nand.o -obj-$(CONFIG_MTD_NAND_BCM_UMI) += bcm_umi_nand.o nand_bcm_umi.o obj-$(CONFIG_MTD_NAND_MPC5121_NFC) += mpc5121_nfc.o obj-$(CONFIG_MTD_NAND_RICOH) += r852.o obj-$(CONFIG_MTD_NAND_JZ4740) += jz4740_nand.o obj-$(CONFIG_MTD_NAND_GPMI_NAND) += gpmi-nand/ +obj-$(CONFIG_MTD_NAND_XWAY) += xway_nand.o nand-objs := nand_base.o nand_bbt.o diff --git a/drivers/mtd/nand/ams-delta.c b/drivers/mtd/nand/ams-delta.c index a7040af..9e7723a 100644 --- a/drivers/mtd/nand/ams-delta.c +++ b/drivers/mtd/nand/ams-delta.c @@ -107,18 +107,6 @@ static void ams_delta_read_buf(struct mtd_info *mtd, u_char *buf, int len) buf[i] = ams_delta_read_byte(mtd); } -static int ams_delta_verify_buf(struct mtd_info *mtd, const u_char *buf, - int len) -{ - int i; - - for (i=0; i<len; i++) - if (buf[i] != ams_delta_read_byte(mtd)) - return -EFAULT; - - return 0; -} - /* * Command control function * @@ -237,7 +225,6 @@ static int __devinit ams_delta_init(struct platform_device *pdev) this->read_byte = ams_delta_read_byte; this->write_buf = ams_delta_write_buf; this->read_buf = ams_delta_read_buf; - this->verify_buf = ams_delta_verify_buf; this->cmd_ctrl = ams_delta_hwcontrol; if (gpio_request(AMS_DELTA_GPIO_PIN_NAND_RB, "nand_rdy") == 0) { this->dev_ready = ams_delta_nand_ready; diff --git a/drivers/mtd/nand/atmel_nand.c b/drivers/mtd/nand/atmel_nand.c index 97ac671..9144557 100644 --- a/drivers/mtd/nand/atmel_nand.c +++ b/drivers/mtd/nand/atmel_nand.c @@ -1,20 +1,22 @@ /* - * Copyright (C) 2003 Rick Bronson + * Copyright © 2003 Rick Bronson * * Derived from drivers/mtd/nand/autcpu12.c - * Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de) + * Copyright © 2001 Thomas Gleixner (gleixner@autronix.de) * * Derived from drivers/mtd/spia.c - * Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com) + * Copyright © 2000 Steven J. Hill (sjhill@cotw.com) * * * Add Hardware ECC support for AT91SAM9260 / AT91SAM9263 - * Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright (C) 2007 + * Richard Genoud (richard.genoud@gmail.com), Adeneo Copyright © 2007 * * Derived from Das U-Boot source code * (u-boot-1.1.5/board/atmel/at91sam9263ek/nand.c) - * (C) Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas + * © Copyright 2006 ATMEL Rousset, Lacressonniere Nicolas * + * Add Programmable Multibit ECC support for various AT91 SoC + * © Copyright 2012 ATMEL, Hong Xu * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -93,8 +95,36 @@ struct atmel_nand_host { struct completion comp; struct dma_chan *dma_chan; + + bool has_pmecc; + u8 pmecc_corr_cap; + u16 pmecc_sector_size; + u32 pmecc_lookup_table_offset; + + int pmecc_bytes_per_sector; + int pmecc_sector_number; + int pmecc_degree; /* Degree of remainders */ + int pmecc_cw_len; /* Length of codeword */ + + void __iomem *pmerrloc_base; + void __iomem *pmecc_rom_base; + + /* lookup table for alpha_to and index_of */ + void __iomem *pmecc_alpha_to; + void __iomem *pmecc_index_of; + + /* data for pmecc computation */ + int16_t *pmecc_partial_syn; + int16_t *pmecc_si; + int16_t *pmecc_smu; /* Sigma table */ + int16_t *pmecc_lmu; /* polynomal order */ + int *pmecc_mu; + int *pmecc_dmu; + int *pmecc_delta; }; +static struct nand_ecclayout atmel_pmecc_oobinfo; + static int cpu_has_dma(void) { return cpu_is_at91sam9rl() || cpu_is_at91sam9g45(); @@ -288,6 +318,703 @@ static void atmel_write_buf(struct mtd_info *mtd, const u8 *buf, int len) } /* + * Return number of ecc bytes per sector according to sector size and + * correction capability + * + * Following table shows what at91 PMECC supported: + * Correction Capability Sector_512_bytes Sector_1024_bytes + * ===================== ================ ================= + * 2-bits 4-bytes 4-bytes + * 4-bits 7-bytes 7-bytes + * 8-bits 13-bytes 14-bytes + * 12-bits 20-bytes 21-bytes + * 24-bits 39-bytes 42-bytes + */ +static int __devinit pmecc_get_ecc_bytes(int cap, int sector_size) +{ + int m = 12 + sector_size / 512; + return (m * cap + 7) / 8; +} + +static void __devinit pmecc_config_ecc_layout(struct nand_ecclayout *layout, + int oobsize, int ecc_len) +{ + int i; + + layout->eccbytes = ecc_len; + + /* ECC will occupy the last ecc_len bytes continuously */ + for (i = 0; i < ecc_len; i++) + layout->eccpos[i] = oobsize - ecc_len + i; + + layout->oobfree[0].offset = 2; + layout->oobfree[0].length = + oobsize - ecc_len - layout->oobfree[0].offset; +} + +static void __devinit __iomem *pmecc_get_alpha_to(struct atmel_nand_host *host) +{ + int table_size; + + table_size = host->pmecc_sector_size == 512 ? + PMECC_LOOKUP_TABLE_SIZE_512 : PMECC_LOOKUP_TABLE_SIZE_1024; + + return host->pmecc_rom_base + host->pmecc_lookup_table_offset + + table_size * sizeof(int16_t); +} + +static void pmecc_data_free(struct atmel_nand_host *host) +{ + kfree(host->pmecc_partial_syn); + kfree(host->pmecc_si); + kfree(host->pmecc_lmu); + kfree(host->pmecc_smu); + kfree(host->pmecc_mu); + kfree(host->pmecc_dmu); + kfree(host->pmecc_delta); +} + +static int __devinit pmecc_data_alloc(struct atmel_nand_host *host) +{ + const int cap = host->pmecc_corr_cap; + + host->pmecc_partial_syn = kzalloc((2 * cap + 1) * sizeof(int16_t), + GFP_KERNEL); + host->pmecc_si = kzalloc((2 * cap + 1) * sizeof(int16_t), GFP_KERNEL); + host->pmecc_lmu = kzalloc((cap + 1) * sizeof(int16_t), GFP_KERNEL); + host->pmecc_smu = kzalloc((cap + 2) * (2 * cap + 1) * sizeof(int16_t), + GFP_KERNEL); + host->pmecc_mu = kzalloc((cap + 1) * sizeof(int), GFP_KERNEL); + host->pmecc_dmu = kzalloc((cap + 1) * sizeof(int), GFP_KERNEL); + host->pmecc_delta = kzalloc((cap + 1) * sizeof(int), GFP_KERNEL); + + if (host->pmecc_partial_syn && + host->pmecc_si && + host->pmecc_lmu && + host->pmecc_smu && + host->pmecc_mu && + host->pmecc_dmu && + host->pmecc_delta) + return 0; + + /* error happened */ + pmecc_data_free(host); + return -ENOMEM; +} + +static void pmecc_gen_syndrome(struct mtd_info *mtd, int sector) +{ + struct nand_chip *nand_chip = mtd->priv; + struct atmel_nand_host *host = nand_chip->priv; + int i; + uint32_t value; + + /* Fill odd syndromes */ + for (i = 0; i < host->pmecc_corr_cap; i++) { + value = pmecc_readl_rem_relaxed(host->ecc, sector, i / 2); + if (i & 1) + value >>= 16; + value &= 0xffff; + host->pmecc_partial_syn[(2 * i) + 1] = (int16_t)value; + } +} + +static void pmecc_substitute(struct mtd_info *mtd) +{ + struct nand_chip *nand_chip = mtd->priv; + struct atmel_nand_host *host = nand_chip->priv; + int16_t __iomem *alpha_to = host->pmecc_alpha_to; + int16_t __iomem *index_of = host->pmecc_index_of; + int16_t *partial_syn = host->pmecc_partial_syn; + const int cap = host->pmecc_corr_cap; + int16_t *si; + int i, j; + + /* si[] is a table that holds the current syndrome value, + * an element of that table belongs to the field + */ + si = host->pmecc_si; + + memset(&si[1], 0, sizeof(int16_t) * (2 * cap - 1)); + + /* Computation 2t syndromes based on S(x) */ + /* Odd syndromes */ + for (i = 1; i < 2 * cap; i += 2) { + for (j = 0; j < host->pmecc_degree; j++) { + if (partial_syn[i] & ((unsigned short)0x1 << j)) + si[i] = readw_relaxed(alpha_to + i * j) ^ si[i]; + } + } + /* Even syndrome = (Odd syndrome) ** 2 */ + for (i = 2, j = 1; j <= cap; i = ++j << 1) { + if (si[j] == 0) { + si[i] = 0; + } else { + int16_t tmp; + + tmp = readw_relaxed(index_of + si[j]); + tmp = (tmp * 2) % host->pmecc_cw_len; + si[i] = readw_relaxed(alpha_to + tmp); + } + } + + return; +} + +static void pmecc_get_sigma(struct mtd_info *mtd) +{ + struct nand_chip *nand_chip = mtd->priv; + struct atmel_nand_host *host = nand_chip->priv; + + int16_t *lmu = host->pmecc_lmu; + int16_t *si = host->pmecc_si; + int *mu = host->pmecc_mu; + int *dmu = host->pmecc_dmu; /* Discrepancy */ + int *delta = host->pmecc_delta; /* Delta order */ + int cw_len = host->pmecc_cw_len; + const int16_t cap = host->pmecc_corr_cap; + const int num = 2 * cap + 1; + int16_t __iomem *index_of = host->pmecc_index_of; + int16_t __iomem *alpha_to = host->pmecc_alpha_to; + int i, j, k; + uint32_t dmu_0_count, tmp; + int16_t *smu = host->pmecc_smu; + + /* index of largest delta */ + int ro; + int largest; + int diff; + + dmu_0_count = 0; + + /* First Row */ + + /* Mu */ + mu[0] = -1; + + memset(smu, 0, sizeof(int16_t) * num); + smu[0] = 1; + + /* discrepancy set to 1 */ + dmu[0] = 1; + /* polynom order set to 0 */ + lmu[0] = 0; + delta[0] = (mu[0] * 2 - lmu[0]) >> 1; + + /* Second Row */ + + /* Mu */ + mu[1] = 0; + /* Sigma(x) set to 1 */ + memset(&smu[num], 0, sizeof(int16_t) * num); + smu[num] = 1; + + /* discrepancy set to S1 */ + dmu[1] = si[1]; + + /* polynom order set to 0 */ + lmu[1] = 0; + + delta[1] = (mu[1] * 2 - lmu[1]) >> 1; + + /* Init the Sigma(x) last row */ + memset(&smu[(cap + 1) * num], 0, sizeof(int16_t) * num); + + for (i = 1; i <= cap; i++) { + mu[i + 1] = i << 1; + /* Begin Computing Sigma (Mu+1) and L(mu) */ + /* check if discrepancy is set to 0 */ + if (dmu[i] == 0) { + dmu_0_count++; + + tmp = ((cap - (lmu[i] >> 1) - 1) / 2); + if ((cap - (lmu[i] >> 1) - 1) & 0x1) + tmp += 2; + else + tmp += 1; + + if (dmu_0_count == tmp) { + for (j = 0; j <= (lmu[i] >> 1) + 1; j++) + smu[(cap + 1) * num + j] = + smu[i * num + j]; + + lmu[cap + 1] = lmu[i]; + return; + } + + /* copy polynom */ + for (j = 0; j <= lmu[i] >> 1; j++) + smu[(i + 1) * num + j] = smu[i * num + j]; + + /* copy previous polynom order to the next */ + lmu[i + 1] = lmu[i]; + } else { + ro = 0; + largest = -1; + /* find largest delta with dmu != 0 */ + for (j = 0; j < i; j++) { + if ((dmu[j]) && (delta[j] > largest)) { + largest = delta[j]; + ro = j; + } + } + + /* compute difference */ + diff = (mu[i] - mu[ro]); + + /* Compute degree of the new smu polynomial */ + if ((lmu[i] >> 1) > ((lmu[ro] >> 1) + diff)) + lmu[i + 1] = lmu[i]; + else + lmu[i + 1] = ((lmu[ro] >> 1) + diff) * 2; + + /* Init smu[i+1] with 0 */ + for (k = 0; k < num; k++) + smu[(i + 1) * num + k] = 0; + + /* Compute smu[i+1] */ + for (k = 0; k <= lmu[ro] >> 1; k++) { + int16_t a, b, c; + + if (!(smu[ro * num + k] && dmu[i])) + continue; + a = readw_relaxed(index_of + dmu[i]); + b = readw_relaxed(index_of + dmu[ro]); + c = readw_relaxed(index_of + smu[ro * num + k]); + tmp = a + (cw_len - b) + c; + a = readw_relaxed(alpha_to + tmp % cw_len); + smu[(i + 1) * num + (k + diff)] = a; + } + + for (k = 0; k <= lmu[i] >> 1; k++) + smu[(i + 1) * num + k] ^= smu[i * num + k]; + } + + /* End Computing Sigma (Mu+1) and L(mu) */ + /* In either case compute delta */ + delta[i + 1] = (mu[i + 1] * 2 - lmu[i + 1]) >> 1; + + /* Do not compute discrepancy for the last iteration */ + if (i >= cap) + continue; + + for (k = 0; k <= (lmu[i + 1] >> 1); k++) { + tmp = 2 * (i - 1); + if (k == 0) { + dmu[i + 1] = si[tmp + 3]; + } else if (smu[(i + 1) * num + k] && si[tmp + 3 - k]) { + int16_t a, b, c; + a = readw_relaxed(index_of + + smu[(i + 1) * num + k]); + b = si[2 * (i - 1) + 3 - k]; + c = readw_relaxed(index_of + b); + tmp = a + c; + tmp %= cw_len; + dmu[i + 1] = readw_relaxed(alpha_to + tmp) ^ + dmu[i + 1]; + } + } + } + + return; +} + +static int pmecc_err_location(struct mtd_info *mtd) +{ + struct nand_chip *nand_chip = mtd->priv; + struct atmel_nand_host *host = nand_chip->priv; + unsigned long end_time; + const int cap = host->pmecc_corr_cap; + const int num = 2 * cap + 1; + int sector_size = host->pmecc_sector_size; + int err_nbr = 0; /* number of error */ + int roots_nbr; /* number of roots */ + int i; + uint32_t val; + int16_t *smu = host->pmecc_smu; + + pmerrloc_writel(host->pmerrloc_base, ELDIS, PMERRLOC_DISABLE); + + for (i = 0; i <= host->pmecc_lmu[cap + 1] >> 1; i++) { + pmerrloc_writel_sigma_relaxed(host->pmerrloc_base, i, + smu[(cap + 1) * num + i]); + err_nbr++; + } + + val = (err_nbr - 1) << 16; + if (sector_size == 1024) + val |= 1; + + pmerrloc_writel(host->pmerrloc_base, ELCFG, val); + pmerrloc_writel(host->pmerrloc_base, ELEN, + sector_size * 8 + host->pmecc_degree * cap); + + end_time = jiffies + msecs_to_jiffies(PMECC_MAX_TIMEOUT_MS); + while (!(pmerrloc_readl_relaxed(host->pmerrloc_base, ELISR) + & PMERRLOC_CALC_DONE)) { + if (unlikely(time_after(jiffies, end_time))) { + dev_err(host->dev, "PMECC: Timeout to calculate error location.\n"); + return -1; + } + cpu_relax(); + } + + roots_nbr = (pmerrloc_readl_relaxed(host->pmerrloc_base, ELISR) + & PMERRLOC_ERR_NUM_MASK) >> 8; + /* Number of roots == degree of smu hence <= cap */ + if (roots_nbr == host->pmecc_lmu[cap + 1] >> 1) + return err_nbr - 1; + + /* Number of roots does not match the degree of smu + * unable to correct error */ + return -1; +} + +static void pmecc_correct_data(struct mtd_info *mtd, uint8_t *buf, uint8_t *ecc, + int sector_num, int extra_bytes, int err_nbr) +{ + struct nand_chip *nand_chip = mtd->priv; + struct atmel_nand_host *host = nand_chip->priv; + int i = 0; + int byte_pos, bit_pos, sector_size, pos; + uint32_t tmp; + uint8_t err_byte; + + sector_size = host->pmecc_sector_size; + + while (err_nbr) { + tmp = pmerrloc_readl_el_relaxed(host->pmerrloc_base, i) - 1; + byte_pos = tmp / 8; + bit_pos = tmp % 8; + + if (byte_pos >= (sector_size + extra_bytes)) + BUG(); /* should never happen */ + + if (byte_pos < sector_size) { + err_byte = *(buf + byte_pos); + *(buf + byte_pos) ^= (1 << bit_pos); + + pos = sector_num * host->pmecc_sector_size + byte_pos; + dev_info(host->dev, "Bit flip in data area, byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n", + pos, bit_pos, err_byte, *(buf + byte_pos)); + } else { + /* Bit flip in OOB area */ + tmp = sector_num * host->pmecc_bytes_per_sector + + (byte_pos - sector_size); + err_byte = ecc[tmp]; + ecc[tmp] ^= (1 << bit_pos); + + pos = tmp + nand_chip->ecc.layout->eccpos[0]; + dev_info(host->dev, "Bit flip in OOB, oob_byte_pos: %d, bit_pos: %d, 0x%02x -> 0x%02x\n", + pos, bit_pos, err_byte, ecc[tmp]); + } + + i++; + err_nbr--; + } + + return; +} + +static int pmecc_correction(struct mtd_info *mtd, u32 pmecc_stat, uint8_t *buf, + u8 *ecc) +{ + struct nand_chip *nand_chip = mtd->priv; + struct atmel_nand_host *host = nand_chip->priv; + int i, err_nbr, eccbytes; + uint8_t *buf_pos; + + eccbytes = nand_chip->ecc.bytes; + for (i = 0; i < eccbytes; i++) + if (ecc[i] != 0xff) + goto normal_check; + /* Erased page, return OK */ + return 0; + +normal_check: + for (i = 0; i < host->pmecc_sector_number; i++) { + err_nbr = 0; + if (pmecc_stat & 0x1) { + buf_pos = buf + i * host->pmecc_sector_size; + + pmecc_gen_syndrome(mtd, i); + pmecc_substitute(mtd); + pmecc_get_sigma(mtd); + + err_nbr = pmecc_err_location(mtd); + if (err_nbr == -1) { + dev_err(host->dev, "PMECC: Too many errors\n"); + mtd->ecc_stats.failed++; + return -EIO; + } else { + pmecc_correct_data(mtd, buf_pos, ecc, i, + host->pmecc_bytes_per_sector, err_nbr); + mtd->ecc_stats.corrected += err_nbr; + } + } + pmecc_stat >>= 1; + } + + return 0; +} + +static int atmel_nand_pmecc_read_page(struct mtd_info *mtd, + struct nand_chip *chip, uint8_t *buf, int oob_required, int page) +{ + struct atmel_nand_host *host = chip->priv; + int eccsize = chip->ecc.size; + uint8_t *oob = chip->oob_poi; + uint32_t *eccpos = chip->ecc.layout->eccpos; + uint32_t stat; + unsigned long end_time; + + pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST); + pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE); + pmecc_writel(host->ecc, CFG, (pmecc_readl_relaxed(host->ecc, CFG) + & ~PMECC_CFG_WRITE_OP) | PMECC_CFG_AUTO_ENABLE); + + pmecc_writel(host->ecc, CTRL, PMECC_CTRL_ENABLE); + pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DATA); + + chip->read_buf(mtd, buf, eccsize); + chip->read_buf(mtd, oob, mtd->oobsize); + + end_time = jiffies + msecs_to_jiffies(PMECC_MAX_TIMEOUT_MS); + while ((pmecc_readl_relaxed(host->ecc, SR) & PMECC_SR_BUSY)) { + if (unlikely(time_after(jiffies, end_time))) { + dev_err(host->dev, "PMECC: Timeout to get error status.\n"); + return -EIO; + } + cpu_relax(); + } + + stat = pmecc_readl_relaxed(host->ecc, ISR); + if (stat != 0) + if (pmecc_correction(mtd, stat, buf, &oob[eccpos[0]]) != 0) + return -EIO; + + return 0; +} + +static int atmel_nand_pmecc_write_page(struct mtd_info *mtd, + struct nand_chip *chip, const uint8_t *buf, int oob_required) +{ + struct atmel_nand_host *host = chip->priv; + uint32_t *eccpos = chip->ecc.layout->eccpos; + int i, j; + unsigned long end_time; + + pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST); + pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE); + + pmecc_writel(host->ecc, CFG, (pmecc_readl_relaxed(host->ecc, CFG) | + PMECC_CFG_WRITE_OP) & ~PMECC_CFG_AUTO_ENABLE); + + pmecc_writel(host->ecc, CTRL, PMECC_CTRL_ENABLE); + pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DATA); + + chip->write_buf(mtd, (u8 *)buf, mtd->writesize); + + end_time = jiffies + msecs_to_jiffies(PMECC_MAX_TIMEOUT_MS); + while ((pmecc_readl_relaxed(host->ecc, SR) & PMECC_SR_BUSY)) { + if (unlikely(time_after(jiffies, end_time))) { + dev_err(host->dev, "PMECC: Timeout to get ECC value.\n"); + return -EIO; + } + cpu_relax(); + } + + for (i = 0; i < host->pmecc_sector_number; i++) { + for (j = 0; j < host->pmecc_bytes_per_sector; j++) { + int pos; + + pos = i * host->pmecc_bytes_per_sector + j; + chip->oob_poi[eccpos[pos]] = + pmecc_readb_ecc_relaxed(host->ecc, i, j); + } + } + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); + + return 0; +} + +static void atmel_pmecc_core_init(struct mtd_info *mtd) +{ + struct nand_chip *nand_chip = mtd->priv; + struct atmel_nand_host *host = nand_chip->priv; + uint32_t val = 0; + struct nand_ecclayout *ecc_layout; + + pmecc_writel(host->ecc, CTRL, PMECC_CTRL_RST); + pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE); + + switch (host->pmecc_corr_cap) { + case 2: + val = PMECC_CFG_BCH_ERR2; + break; + case 4: + val = PMECC_CFG_BCH_ERR4; + break; + case 8: + val = PMECC_CFG_BCH_ERR8; + break; + case 12: + val = PMECC_CFG_BCH_ERR12; + break; + case 24: + val = PMECC_CFG_BCH_ERR24; + break; + } + + if (host->pmecc_sector_size == 512) + val |= PMECC_CFG_SECTOR512; + else if (host->pmecc_sector_size == 1024) + val |= PMECC_CFG_SECTOR1024; + + switch (host->pmecc_sector_number) { + case 1: + val |= PMECC_CFG_PAGE_1SECTOR; + break; + case 2: + val |= PMECC_CFG_PAGE_2SECTORS; + break; + case 4: + val |= PMECC_CFG_PAGE_4SECTORS; + break; + case 8: + val |= PMECC_CFG_PAGE_8SECTORS; + break; + } + + val |= (PMECC_CFG_READ_OP | PMECC_CFG_SPARE_DISABLE + | PMECC_CFG_AUTO_DISABLE); + pmecc_writel(host->ecc, CFG, val); + + ecc_layout = nand_chip->ecc.layout; + pmecc_writel(host->ecc, SAREA, mtd->oobsize - 1); + pmecc_writel(host->ecc, SADDR, ecc_layout->eccpos[0]); + pmecc_writel(host->ecc, EADDR, + ecc_layout->eccpos[ecc_layout->eccbytes - 1]); + /* See datasheet about PMECC Clock Control Register */ + pmecc_writel(host->ecc, CLK, 2); + pmecc_writel(host->ecc, IDR, 0xff); + pmecc_writel(host->ecc, CTRL, PMECC_CTRL_ENABLE); +} + +static int __init atmel_pmecc_nand_init_params(struct platform_device *pdev, + struct atmel_nand_host *host) +{ + struct mtd_info *mtd = &host->mtd; + struct nand_chip *nand_chip = &host->nand_chip; + struct resource *regs, *regs_pmerr, *regs_rom; + int cap, sector_size, err_no; + + cap = host->pmecc_corr_cap; + sector_size = host->pmecc_sector_size; + dev_info(host->dev, "Initialize PMECC params, cap: %d, sector: %d\n", + cap, sector_size); + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!regs) { + dev_warn(host->dev, + "Can't get I/O resource regs for PMECC controller, rolling back on software ECC\n"); + nand_chip->ecc.mode = NAND_ECC_SOFT; + return 0; + } + + host->ecc = ioremap(regs->start, resource_size(regs)); + if (host->ecc == NULL) { + dev_err(host->dev, "ioremap failed\n"); + err_no = -EIO; + goto err_pmecc_ioremap; + } + + regs_pmerr = platform_get_resource(pdev, IORESOURCE_MEM, 2); + regs_rom = platform_get_resource(pdev, IORESOURCE_MEM, 3); + if (regs_pmerr && regs_rom) { + host->pmerrloc_base = ioremap(regs_pmerr->start, + resource_size(regs_pmerr)); + host->pmecc_rom_base = ioremap(regs_rom->start, + resource_size(regs_rom)); + } + + if (!host->pmerrloc_base || !host->pmecc_rom_base) { + dev_err(host->dev, + "Can not get I/O resource for PMECC ERRLOC controller or ROM!\n"); + err_no = -EIO; + goto err_pmloc_ioremap; + } + + /* ECC is calculated for the whole page (1 step) */ + nand_chip->ecc.size = mtd->writesize; + + /* set ECC page size and oob layout */ + switch (mtd->writesize) { + case 2048: + host->pmecc_degree = PMECC_GF_DIMENSION_13; + host->pmecc_cw_len = (1 << host->pmecc_degree) - 1; + host->pmecc_sector_number = mtd->writesize / sector_size; + host->pmecc_bytes_per_sector = pmecc_get_ecc_bytes( + cap, sector_size); + host->pmecc_alpha_to = pmecc_get_alpha_to(host); + host->pmecc_index_of = host->pmecc_rom_base + + host->pmecc_lookup_table_offset; + + nand_chip->ecc.steps = 1; + nand_chip->ecc.strength = cap; + nand_chip->ecc.bytes = host->pmecc_bytes_per_sector * + host->pmecc_sector_number; + if (nand_chip->ecc.bytes > mtd->oobsize - 2) { + dev_err(host->dev, "No room for ECC bytes\n"); + err_no = -EINVAL; + goto err_no_ecc_room; + } + pmecc_config_ecc_layout(&atmel_pmecc_oobinfo, + mtd->oobsize, + nand_chip->ecc.bytes); + nand_chip->ecc.layout = &atmel_pmecc_oobinfo; + break; + case 512: + case 1024: + case 4096: + /* TODO */ + dev_warn(host->dev, + "Unsupported page size for PMECC, use Software ECC\n"); + default: + /* page size not handled by HW ECC */ + /* switching back to soft ECC */ + nand_chip->ecc.mode = NAND_ECC_SOFT; + return 0; + } + + /* Allocate data for PMECC computation */ + err_no = pmecc_data_alloc(host); + if (err_no) { + dev_err(host->dev, + "Cannot allocate memory for PMECC computation!\n"); + goto err_pmecc_data_alloc; + } + + nand_chip->ecc.read_page = atmel_nand_pmecc_read_page; + nand_chip->ecc.write_page = atmel_nand_pmecc_write_page; + + atmel_pmecc_core_init(mtd); + + return 0; + +err_pmecc_data_alloc: +err_no_ecc_room: +err_pmloc_ioremap: + iounmap(host->ecc); + if (host->pmerrloc_base) + iounmap(host->pmerrloc_base); + if (host->pmecc_rom_base) + iounmap(host->pmecc_rom_base); +err_pmecc_ioremap: + return err_no; +} + +/* * Calculate HW ECC * * function called after a write @@ -481,7 +1208,8 @@ static void atmel_nand_hwctl(struct mtd_info *mtd, int mode) static int __devinit atmel_of_init_port(struct atmel_nand_host *host, struct device_node *np) { - u32 val; + u32 val, table_offset; + u32 offset[2]; int ecc_mode; struct atmel_nand_data *board = &host->board; enum of_gpio_flags flags; @@ -517,6 +1245,50 @@ static int __devinit atmel_of_init_port(struct atmel_nand_host *host, board->enable_pin = of_get_gpio(np, 1); board->det_pin = of_get_gpio(np, 2); + host->has_pmecc = of_property_read_bool(np, "atmel,has-pmecc"); + + if (!(board->ecc_mode == NAND_ECC_HW) || !host->has_pmecc) + return 0; /* Not using PMECC */ + + /* use PMECC, get correction capability, sector size and lookup + * table offset. + */ + if (of_property_read_u32(np, "atmel,pmecc-cap", &val) != 0) { + dev_err(host->dev, "Cannot decide PMECC Capability\n"); + return -EINVAL; + } else if ((val != 2) && (val != 4) && (val != 8) && (val != 12) && + (val != 24)) { + dev_err(host->dev, + "Unsupported PMECC correction capability: %d; should be 2, 4, 8, 12 or 24\n", + val); + return -EINVAL; + } + host->pmecc_corr_cap = (u8)val; + + if (of_property_read_u32(np, "atmel,pmecc-sector-size", &val) != 0) { + dev_err(host->dev, "Cannot decide PMECC Sector Size\n"); + return -EINVAL; + } else if ((val != 512) && (val != 1024)) { + dev_err(host->dev, + "Unsupported PMECC sector size: %d; should be 512 or 1024 bytes\n", + val); + return -EINVAL; + } + host->pmecc_sector_size = (u16)val; + + if (of_property_read_u32_array(np, "atmel,pmecc-lookup-table-offset", + offset, 2) != 0) { + dev_err(host->dev, "Cannot get PMECC lookup table offset\n"); + return -EINVAL; + } + table_offset = host->pmecc_sector_size == 512 ? offset[0] : offset[1]; + + if (!table_offset) { + dev_err(host->dev, "Invalid PMECC lookup table offset\n"); + return -EINVAL; + } + host->pmecc_lookup_table_offset = table_offset; + return 0; } #else @@ -527,6 +1299,66 @@ static int __devinit atmel_of_init_port(struct atmel_nand_host *host, } #endif +static int __init atmel_hw_nand_init_params(struct platform_device *pdev, + struct atmel_nand_host *host) +{ + struct mtd_info *mtd = &host->mtd; + struct nand_chip *nand_chip = &host->nand_chip; + struct resource *regs; + + regs = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!regs) { + dev_err(host->dev, + "Can't get I/O resource regs, use software ECC\n"); + nand_chip->ecc.mode = NAND_ECC_SOFT; + return 0; + } + + host->ecc = ioremap(regs->start, resource_size(regs)); + if (host->ecc == NULL) { + dev_err(host->dev, "ioremap failed\n"); + return -EIO; + } + + /* ECC is calculated for the whole page (1 step) */ + nand_chip->ecc.size = mtd->writesize; + + /* set ECC page size and oob layout */ + switch (mtd->writesize) { + case 512: + nand_chip->ecc.layout = &atmel_oobinfo_small; + ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528); + break; + case 1024: + nand_chip->ecc.layout = &atmel_oobinfo_large; + ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056); + break; + case 2048: + nand_chip->ecc.layout = &atmel_oobinfo_large; + ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112); + break; + case 4096: + nand_chip->ecc.layout = &atmel_oobinfo_large; + ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224); + break; + default: + /* page size not handled by HW ECC */ + /* switching back to soft ECC */ + nand_chip->ecc.mode = NAND_ECC_SOFT; + return 0; + } + + /* set up for HW ECC */ + nand_chip->ecc.calculate = atmel_nand_calculate; + nand_chip->ecc.correct = atmel_nand_correct; + nand_chip->ecc.hwctl = atmel_nand_hwctl; + nand_chip->ecc.read_page = atmel_nand_read_page; + nand_chip->ecc.bytes = 4; + nand_chip->ecc.strength = 1; + + return 0; +} + /* * Probe for the NAND device. */ @@ -535,7 +1367,6 @@ static int __init atmel_nand_probe(struct platform_device *pdev) struct atmel_nand_host *host; struct mtd_info *mtd; struct nand_chip *nand_chip; - struct resource *regs; struct resource *mem; struct mtd_part_parser_data ppdata = {}; int res; @@ -568,7 +1399,7 @@ static int __init atmel_nand_probe(struct platform_device *pdev) if (pdev->dev.of_node) { res = atmel_of_init_port(host, pdev->dev.of_node); if (res) - goto err_nand_ioremap; + goto err_ecc_ioremap; } else { memcpy(&host->board, pdev->dev.platform_data, sizeof(struct atmel_nand_data)); @@ -583,33 +1414,45 @@ static int __init atmel_nand_probe(struct platform_device *pdev) nand_chip->IO_ADDR_W = host->io_base; nand_chip->cmd_ctrl = atmel_nand_cmd_ctrl; - if (gpio_is_valid(host->board.rdy_pin)) - nand_chip->dev_ready = atmel_nand_device_ready; + if (gpio_is_valid(host->board.rdy_pin)) { + res = gpio_request(host->board.rdy_pin, "nand_rdy"); + if (res < 0) { + dev_err(&pdev->dev, + "can't request rdy gpio %d\n", + host->board.rdy_pin); + goto err_ecc_ioremap; + } - nand_chip->ecc.mode = host->board.ecc_mode; + res = gpio_direction_input(host->board.rdy_pin); + if (res < 0) { + dev_err(&pdev->dev, + "can't request input direction rdy gpio %d\n", + host->board.rdy_pin); + goto err_ecc_ioremap; + } - regs = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!regs && nand_chip->ecc.mode == NAND_ECC_HW) { - printk(KERN_ERR "atmel_nand: can't get I/O resource " - "regs\nFalling back on software ECC\n"); - nand_chip->ecc.mode = NAND_ECC_SOFT; + nand_chip->dev_ready = atmel_nand_device_ready; } - if (nand_chip->ecc.mode == NAND_ECC_HW) { - host->ecc = ioremap(regs->start, resource_size(regs)); - if (host->ecc == NULL) { - printk(KERN_ERR "atmel_nand: ioremap failed\n"); - res = -EIO; + if (gpio_is_valid(host->board.enable_pin)) { + res = gpio_request(host->board.enable_pin, "nand_enable"); + if (res < 0) { + dev_err(&pdev->dev, + "can't request enable gpio %d\n", + host->board.enable_pin); + goto err_ecc_ioremap; + } + + res = gpio_direction_output(host->board.enable_pin, 1); + if (res < 0) { + dev_err(&pdev->dev, + "can't request output direction enable gpio %d\n", + host->board.enable_pin); goto err_ecc_ioremap; } - nand_chip->ecc.calculate = atmel_nand_calculate; - nand_chip->ecc.correct = atmel_nand_correct; - nand_chip->ecc.hwctl = atmel_nand_hwctl; - nand_chip->ecc.read_page = atmel_nand_read_page; - nand_chip->ecc.bytes = 4; - nand_chip->ecc.strength = 1; } + nand_chip->ecc.mode = host->board.ecc_mode; nand_chip->chip_delay = 20; /* 20us command delay time */ if (host->board.bus_width_16) /* 16-bit bus width */ @@ -622,6 +1465,22 @@ static int __init atmel_nand_probe(struct platform_device *pdev) atmel_nand_enable(host); if (gpio_is_valid(host->board.det_pin)) { + res = gpio_request(host->board.det_pin, "nand_det"); + if (res < 0) { + dev_err(&pdev->dev, + "can't request det gpio %d\n", + host->board.det_pin); + goto err_no_card; + } + + res = gpio_direction_input(host->board.det_pin); + if (res < 0) { + dev_err(&pdev->dev, + "can't request input direction det gpio %d\n", + host->board.det_pin); + goto err_no_card; + } + if (gpio_get_value(host->board.det_pin)) { printk(KERN_INFO "No SmartMedia card inserted.\n"); res = -ENXIO; @@ -661,40 +1520,13 @@ static int __init atmel_nand_probe(struct platform_device *pdev) } if (nand_chip->ecc.mode == NAND_ECC_HW) { - /* ECC is calculated for the whole page (1 step) */ - nand_chip->ecc.size = mtd->writesize; - - /* set ECC page size and oob layout */ - switch (mtd->writesize) { - case 512: - nand_chip->ecc.layout = &atmel_oobinfo_small; - ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_528); - break; - case 1024: - nand_chip->ecc.layout = &atmel_oobinfo_large; - ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_1056); - break; - case 2048: - nand_chip->ecc.layout = &atmel_oobinfo_large; - ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_2112); - break; - case 4096: - nand_chip->ecc.layout = &atmel_oobinfo_large; - ecc_writel(host->ecc, MR, ATMEL_ECC_PAGESIZE_4224); - break; - default: - /* page size not handled by HW ECC */ - /* switching back to soft ECC */ - nand_chip->ecc.mode = NAND_ECC_SOFT; - nand_chip->ecc.calculate = NULL; - nand_chip->ecc.correct = NULL; - nand_chip->ecc.hwctl = NULL; - nand_chip->ecc.read_page = NULL; - nand_chip->ecc.postpad = 0; - nand_chip->ecc.prepad = 0; - nand_chip->ecc.bytes = 0; - break; - } + if (host->has_pmecc) + res = atmel_pmecc_nand_init_params(pdev, host); + else + res = atmel_hw_nand_init_params(pdev, host); + + if (res != 0) + goto err_hw_ecc; } /* second phase scan */ @@ -711,14 +1543,23 @@ static int __init atmel_nand_probe(struct platform_device *pdev) return res; err_scan_tail: + if (host->has_pmecc && host->nand_chip.ecc.mode == NAND_ECC_HW) { + pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE); + pmecc_data_free(host); + } + if (host->ecc) + iounmap(host->ecc); + if (host->pmerrloc_base) + iounmap(host->pmerrloc_base); + if (host->pmecc_rom_base) + iounmap(host->pmecc_rom_base); +err_hw_ecc: err_scan_ident: err_no_card: atmel_nand_disable(host); platform_set_drvdata(pdev, NULL); if (host->dma_chan) dma_release_channel(host->dma_chan); - if (host->ecc) - iounmap(host->ecc); err_ecc_ioremap: iounmap(host->io_base); err_nand_ioremap: @@ -738,8 +1579,28 @@ static int __exit atmel_nand_remove(struct platform_device *pdev) atmel_nand_disable(host); + if (host->has_pmecc && host->nand_chip.ecc.mode == NAND_ECC_HW) { + pmecc_writel(host->ecc, CTRL, PMECC_CTRL_DISABLE); + pmerrloc_writel(host->pmerrloc_base, ELDIS, + PMERRLOC_DISABLE); + pmecc_data_free(host); + } + + if (gpio_is_valid(host->board.det_pin)) + gpio_free(host->board.det_pin); + + if (gpio_is_valid(host->board.enable_pin)) + gpio_free(host->board.enable_pin); + + if (gpio_is_valid(host->board.rdy_pin)) + gpio_free(host->board.rdy_pin); + if (host->ecc) iounmap(host->ecc); + if (host->pmecc_rom_base) + iounmap(host->pmecc_rom_base); + if (host->pmerrloc_base) + iounmap(host->pmerrloc_base); if (host->dma_chan) dma_release_channel(host->dma_chan); diff --git a/drivers/mtd/nand/atmel_nand_ecc.h b/drivers/mtd/nand/atmel_nand_ecc.h index 578c776..8a1e9a6 100644 --- a/drivers/mtd/nand/atmel_nand_ecc.h +++ b/drivers/mtd/nand/atmel_nand_ecc.h @@ -3,7 +3,7 @@ * Based on AT91SAM9260 datasheet revision B. * * Copyright (C) 2007 Andrew Victor - * Copyright (C) 2007 Atmel Corporation. + * Copyright (C) 2007 - 2012 Atmel Corporation. * * This program is free software; you can redistribute it and/or modify it * under the terms of the GNU General Public License as published by the @@ -36,4 +36,116 @@ #define ATMEL_ECC_NPR 0x10 /* NParity register */ #define ATMEL_ECC_NPARITY (0xffff << 0) /* NParity */ +/* PMECC Register Definitions */ +#define ATMEL_PMECC_CFG 0x000 /* Configuration Register */ +#define PMECC_CFG_BCH_ERR2 (0 << 0) +#define PMECC_CFG_BCH_ERR4 (1 << 0) +#define PMECC_CFG_BCH_ERR8 (2 << 0) +#define PMECC_CFG_BCH_ERR12 (3 << 0) +#define PMECC_CFG_BCH_ERR24 (4 << 0) + +#define PMECC_CFG_SECTOR512 (0 << 4) +#define PMECC_CFG_SECTOR1024 (1 << 4) + +#define PMECC_CFG_PAGE_1SECTOR (0 << 8) +#define PMECC_CFG_PAGE_2SECTORS (1 << 8) +#define PMECC_CFG_PAGE_4SECTORS (2 << 8) +#define PMECC_CFG_PAGE_8SECTORS (3 << 8) + +#define PMECC_CFG_READ_OP (0 << 12) +#define PMECC_CFG_WRITE_OP (1 << 12) + +#define PMECC_CFG_SPARE_ENABLE (1 << 16) +#define PMECC_CFG_SPARE_DISABLE (0 << 16) + +#define PMECC_CFG_AUTO_ENABLE (1 << 20) +#define PMECC_CFG_AUTO_DISABLE (0 << 20) + +#define ATMEL_PMECC_SAREA 0x004 /* Spare area size */ +#define ATMEL_PMECC_SADDR 0x008 /* PMECC starting address */ +#define ATMEL_PMECC_EADDR 0x00c /* PMECC ending address */ +#define ATMEL_PMECC_CLK 0x010 /* PMECC clock control */ +#define PMECC_CLK_133MHZ (2 << 0) + +#define ATMEL_PMECC_CTRL 0x014 /* PMECC control register */ +#define PMECC_CTRL_RST (1 << 0) +#define PMECC_CTRL_DATA (1 << 1) +#define PMECC_CTRL_USER (1 << 2) +#define PMECC_CTRL_ENABLE (1 << 4) +#define PMECC_CTRL_DISABLE (1 << 5) + +#define ATMEL_PMECC_SR 0x018 /* PMECC status register */ +#define PMECC_SR_BUSY (1 << 0) +#define PMECC_SR_ENABLE (1 << 4) + +#define ATMEL_PMECC_IER 0x01c /* PMECC interrupt enable */ +#define PMECC_IER_ENABLE (1 << 0) +#define ATMEL_PMECC_IDR 0x020 /* PMECC interrupt disable */ +#define PMECC_IER_DISABLE (1 << 0) +#define ATMEL_PMECC_IMR 0x024 /* PMECC interrupt mask */ +#define PMECC_IER_MASK (1 << 0) +#define ATMEL_PMECC_ISR 0x028 /* PMECC interrupt status */ +#define ATMEL_PMECC_ECCx 0x040 /* PMECC ECC x */ +#define ATMEL_PMECC_REMx 0x240 /* PMECC REM x */ + +/* PMERRLOC Register Definitions */ +#define ATMEL_PMERRLOC_ELCFG 0x000 /* Error location config */ +#define PMERRLOC_ELCFG_SECTOR_512 (0 << 0) +#define PMERRLOC_ELCFG_SECTOR_1024 (1 << 0) +#define PMERRLOC_ELCFG_NUM_ERRORS(n) ((n) << 16) + +#define ATMEL_PMERRLOC_ELPRIM 0x004 /* Error location primitive */ +#define ATMEL_PMERRLOC_ELEN 0x008 /* Error location enable */ +#define ATMEL_PMERRLOC_ELDIS 0x00c /* Error location disable */ +#define PMERRLOC_DISABLE (1 << 0) + +#define ATMEL_PMERRLOC_ELSR 0x010 /* Error location status */ +#define PMERRLOC_ELSR_BUSY (1 << 0) +#define ATMEL_PMERRLOC_ELIER 0x014 /* Error location int enable */ +#define ATMEL_PMERRLOC_ELIDR 0x018 /* Error location int disable */ +#define ATMEL_PMERRLOC_ELIMR 0x01c /* Error location int mask */ +#define ATMEL_PMERRLOC_ELISR 0x020 /* Error location int status */ +#define PMERRLOC_ERR_NUM_MASK (0x1f << 8) +#define PMERRLOC_CALC_DONE (1 << 0) +#define ATMEL_PMERRLOC_SIGMAx 0x028 /* Error location SIGMA x */ +#define ATMEL_PMERRLOC_ELx 0x08c /* Error location x */ + +/* Register access macros for PMECC */ +#define pmecc_readl_relaxed(addr, reg) \ + readl_relaxed((addr) + ATMEL_PMECC_##reg) + +#define pmecc_writel(addr, reg, value) \ + writel((value), (addr) + ATMEL_PMECC_##reg) + +#define pmecc_readb_ecc_relaxed(addr, sector, n) \ + readb_relaxed((addr) + ATMEL_PMECC_ECCx + ((sector) * 0x40) + (n)) + +#define pmecc_readl_rem_relaxed(addr, sector, n) \ + readl_relaxed((addr) + ATMEL_PMECC_REMx + ((sector) * 0x40) + ((n) * 4)) + +#define pmerrloc_readl_relaxed(addr, reg) \ + readl_relaxed((addr) + ATMEL_PMERRLOC_##reg) + +#define pmerrloc_writel(addr, reg, value) \ + writel((value), (addr) + ATMEL_PMERRLOC_##reg) + +#define pmerrloc_writel_sigma_relaxed(addr, n, value) \ + writel_relaxed((value), (addr) + ATMEL_PMERRLOC_SIGMAx + ((n) * 4)) + +#define pmerrloc_readl_sigma_relaxed(addr, n) \ + readl_relaxed((addr) + ATMEL_PMERRLOC_SIGMAx + ((n) * 4)) + +#define pmerrloc_readl_el_relaxed(addr, n) \ + readl_relaxed((addr) + ATMEL_PMERRLOC_ELx + ((n) * 4)) + +/* Galois field dimension */ +#define PMECC_GF_DIMENSION_13 13 +#define PMECC_GF_DIMENSION_14 14 + +#define PMECC_LOOKUP_TABLE_SIZE_512 0x2000 +#define PMECC_LOOKUP_TABLE_SIZE_1024 0x4000 + +/* Time out value for reading PMECC status register */ +#define PMECC_MAX_TIMEOUT_MS 100 + #endif diff --git a/drivers/mtd/nand/au1550nd.c b/drivers/mtd/nand/au1550nd.c index 9f609d2..5c47b20 100644 --- a/drivers/mtd/nand/au1550nd.c +++ b/drivers/mtd/nand/au1550nd.c @@ -141,28 +141,6 @@ static void au_read_buf(struct mtd_info *mtd, u_char *buf, int len) } /** - * au_verify_buf - Verify chip data against buffer - * @mtd: MTD device structure - * @buf: buffer containing the data to compare - * @len: number of bytes to compare - * - * verify function for 8bit buswidth - */ -static int au_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) -{ - int i; - struct nand_chip *this = mtd->priv; - - for (i = 0; i < len; i++) { - if (buf[i] != readb(this->IO_ADDR_R)) - return -EFAULT; - au_sync(); - } - - return 0; -} - -/** * au_write_buf16 - write buffer to chip * @mtd: MTD device structure * @buf: data buffer @@ -205,29 +183,6 @@ static void au_read_buf16(struct mtd_info *mtd, u_char *buf, int len) } } -/** - * au_verify_buf16 - Verify chip data against buffer - * @mtd: MTD device structure - * @buf: buffer containing the data to compare - * @len: number of bytes to compare - * - * verify function for 16bit buswidth - */ -static int au_verify_buf16(struct mtd_info *mtd, const u_char *buf, int len) -{ - int i; - struct nand_chip *this = mtd->priv; - u16 *p = (u16 *) buf; - len >>= 1; - - for (i = 0; i < len; i++) { - if (p[i] != readw(this->IO_ADDR_R)) - return -EFAULT; - au_sync(); - } - return 0; -} - /* Select the chip by setting nCE to low */ #define NAND_CTL_SETNCE 1 /* Deselect the chip by setting nCE to high */ @@ -516,7 +471,6 @@ static int __devinit au1550nd_probe(struct platform_device *pdev) this->read_word = au_read_word; this->write_buf = (pd->devwidth) ? au_write_buf16 : au_write_buf; this->read_buf = (pd->devwidth) ? au_read_buf16 : au_read_buf; - this->verify_buf = (pd->devwidth) ? au_verify_buf16 : au_verify_buf; ret = nand_scan(&ctx->info, 1); if (ret) { diff --git a/drivers/mtd/nand/bcm_umi_bch.c b/drivers/mtd/nand/bcm_umi_bch.c deleted file mode 100644 index 5914bb3..0000000 --- a/drivers/mtd/nand/bcm_umi_bch.c +++ /dev/null @@ -1,217 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2009 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/* ---- Include Files ---------------------------------------------------- */ -#include "nand_bcm_umi.h" - -/* ---- External Variable Declarations ----------------------------------- */ -/* ---- External Function Prototypes ------------------------------------- */ -/* ---- Public Variables ------------------------------------------------- */ -/* ---- Private Constants and Types -------------------------------------- */ - -/* ---- Private Function Prototypes -------------------------------------- */ -static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd, - struct nand_chip *chip, uint8_t *buf, int oob_required, int page); -static void bcm_umi_bch_write_page_hwecc(struct mtd_info *mtd, - struct nand_chip *chip, const uint8_t *buf, int oob_required); - -/* ---- Private Variables ------------------------------------------------ */ - -/* -** nand_hw_eccoob -** New oob placement block for use with hardware ecc generation. -*/ -static struct nand_ecclayout nand_hw_eccoob_512 = { - /* Reserve 5 for BI indicator */ - .oobfree = { -#if (NAND_ECC_NUM_BYTES > 3) - {.offset = 0, .length = 2} -#else - {.offset = 0, .length = 5}, - {.offset = 6, .length = 7} -#endif - } -}; - -/* -** We treat the OOB for a 2K page as if it were 4 512 byte oobs, -** except the BI is at byte 0. -*/ -static struct nand_ecclayout nand_hw_eccoob_2048 = { - /* Reserve 0 as BI indicator */ - .oobfree = { -#if (NAND_ECC_NUM_BYTES > 10) - {.offset = 1, .length = 2}, -#elif (NAND_ECC_NUM_BYTES > 7) - {.offset = 1, .length = 5}, - {.offset = 16, .length = 6}, - {.offset = 32, .length = 6}, - {.offset = 48, .length = 6} -#else - {.offset = 1, .length = 8}, - {.offset = 16, .length = 9}, - {.offset = 32, .length = 9}, - {.offset = 48, .length = 9} -#endif - } -}; - -/* We treat the OOB for a 4K page as if it were 8 512 byte oobs, - * except the BI is at byte 0. */ -static struct nand_ecclayout nand_hw_eccoob_4096 = { - /* Reserve 0 as BI indicator */ - .oobfree = { -#if (NAND_ECC_NUM_BYTES > 10) - {.offset = 1, .length = 2}, - {.offset = 16, .length = 3}, - {.offset = 32, .length = 3}, - {.offset = 48, .length = 3}, - {.offset = 64, .length = 3}, - {.offset = 80, .length = 3}, - {.offset = 96, .length = 3}, - {.offset = 112, .length = 3} -#else - {.offset = 1, .length = 5}, - {.offset = 16, .length = 6}, - {.offset = 32, .length = 6}, - {.offset = 48, .length = 6}, - {.offset = 64, .length = 6}, - {.offset = 80, .length = 6}, - {.offset = 96, .length = 6}, - {.offset = 112, .length = 6} -#endif - } -}; - -/* ---- Private Functions ------------------------------------------------ */ -/* ==== Public Functions ================================================= */ - -/**************************************************************************** -* -* bcm_umi_bch_read_page_hwecc - hardware ecc based page read function -* @mtd: mtd info structure -* @chip: nand chip info structure -* @buf: buffer to store read data -* @oob_required: caller expects OOB data read to chip->oob_poi -* -***************************************************************************/ -static int bcm_umi_bch_read_page_hwecc(struct mtd_info *mtd, - struct nand_chip *chip, uint8_t * buf, - int oob_required, int page) -{ - int sectorIdx = 0; - int eccsize = chip->ecc.size; - int eccsteps = chip->ecc.steps; - uint8_t *datap = buf; - uint8_t eccCalc[NAND_ECC_NUM_BYTES]; - int sectorOobSize = mtd->oobsize / eccsteps; - int stat; - unsigned int max_bitflips = 0; - - for (sectorIdx = 0; sectorIdx < eccsteps; - sectorIdx++, datap += eccsize) { - if (sectorIdx > 0) { - /* Seek to page location within sector */ - chip->cmdfunc(mtd, NAND_CMD_RNDOUT, sectorIdx * eccsize, - -1); - } - - /* Enable hardware ECC before reading the buf */ - nand_bcm_umi_bch_enable_read_hwecc(); - - /* Read in data */ - bcm_umi_nand_read_buf(mtd, datap, eccsize); - - /* Pause hardware ECC after reading the buf */ - nand_bcm_umi_bch_pause_read_ecc_calc(); - - /* Read the OOB ECC */ - chip->cmdfunc(mtd, NAND_CMD_RNDOUT, - mtd->writesize + sectorIdx * sectorOobSize, -1); - nand_bcm_umi_bch_read_oobEcc(mtd->writesize, eccCalc, - NAND_ECC_NUM_BYTES, - chip->oob_poi + - sectorIdx * sectorOobSize); - - /* Correct any ECC detected errors */ - stat = - nand_bcm_umi_bch_correct_page(datap, eccCalc, - NAND_ECC_NUM_BYTES); - - /* Update Stats */ - if (stat < 0) { -#if defined(NAND_BCM_UMI_DEBUG) - printk(KERN_WARNING "%s uncorr_err sectorIdx=%d\n", - __func__, sectorIdx); - printk(KERN_WARNING - "%s data %02x %02x %02x %02x " - "%02x %02x %02x %02x\n", - __func__, datap[0], datap[1], datap[2], datap[3], - datap[4], datap[5], datap[6], datap[7]); - printk(KERN_WARNING - "%s ecc %02x %02x %02x %02x " - "%02x %02x %02x %02x %02x %02x " - "%02x %02x %02x\n", - __func__, eccCalc[0], eccCalc[1], eccCalc[2], - eccCalc[3], eccCalc[4], eccCalc[5], eccCalc[6], - eccCalc[7], eccCalc[8], eccCalc[9], eccCalc[10], - eccCalc[11], eccCalc[12]); - BUG(); -#endif - mtd->ecc_stats.failed++; - } else { -#if defined(NAND_BCM_UMI_DEBUG) - if (stat > 0) { - printk(KERN_INFO - "%s %d correctable_errors detected\n", - __func__, stat); - } -#endif - mtd->ecc_stats.corrected += stat; - max_bitflips = max_t(unsigned int, max_bitflips, stat); - } - } - return max_bitflips; -} - -/**************************************************************************** -* -* bcm_umi_bch_write_page_hwecc - hardware ecc based page write function -* @mtd: mtd info structure -* @chip: nand chip info structure -* @buf: data buffer -* @oob_required: must write chip->oob_poi to OOB -* -***************************************************************************/ -static void bcm_umi_bch_write_page_hwecc(struct mtd_info *mtd, - struct nand_chip *chip, const uint8_t *buf, int oob_required) -{ - int sectorIdx = 0; - int eccsize = chip->ecc.size; - int eccsteps = chip->ecc.steps; - const uint8_t *datap = buf; - uint8_t *oobp = chip->oob_poi; - int sectorOobSize = mtd->oobsize / eccsteps; - - for (sectorIdx = 0; sectorIdx < eccsteps; - sectorIdx++, datap += eccsize, oobp += sectorOobSize) { - /* Enable hardware ECC before writing the buf */ - nand_bcm_umi_bch_enable_write_hwecc(); - bcm_umi_nand_write_buf(mtd, datap, eccsize); - nand_bcm_umi_bch_write_oobEcc(mtd->writesize, oobp, - NAND_ECC_NUM_BYTES); - } - - bcm_umi_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize); -} diff --git a/drivers/mtd/nand/bcm_umi_nand.c b/drivers/mtd/nand/bcm_umi_nand.c deleted file mode 100644 index d0d1bd4..0000000 --- a/drivers/mtd/nand/bcm_umi_nand.c +++ /dev/null @@ -1,555 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2009 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/* ---- Include Files ---------------------------------------------------- */ -#include <linux/module.h> -#include <linux/types.h> -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/slab.h> -#include <linux/string.h> -#include <linux/ioport.h> -#include <linux/device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/io.h> -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/nand_ecc.h> -#include <linux/mtd/partitions.h> - -#include <asm/mach-types.h> - -#include <mach/reg_nand.h> -#include <mach/reg_umi.h> - -#include "nand_bcm_umi.h" - -#include <mach/memory_settings.h> - -#define USE_DMA 1 -#include <mach/dma.h> -#include <linux/dma-mapping.h> -#include <linux/completion.h> - -/* ---- External Variable Declarations ----------------------------------- */ -/* ---- External Function Prototypes ------------------------------------- */ -/* ---- Public Variables ------------------------------------------------- */ -/* ---- Private Constants and Types -------------------------------------- */ -static const __devinitconst char gBanner[] = KERN_INFO \ - "BCM UMI MTD NAND Driver: 1.00\n"; - -#if NAND_ECC_BCH -static uint8_t scan_ff_pattern[] = { 0xff }; - -static struct nand_bbt_descr largepage_bbt = { - .options = 0, - .offs = 0, - .len = 1, - .pattern = scan_ff_pattern -}; -#endif - -/* -** Preallocate a buffer to avoid having to do this every dma operation. -** This is the size of the preallocated coherent DMA buffer. -*/ -#if USE_DMA -#define DMA_MIN_BUFLEN 512 -#define DMA_MAX_BUFLEN PAGE_SIZE -#define USE_DIRECT_IO(len) (((len) < DMA_MIN_BUFLEN) || \ - ((len) > DMA_MAX_BUFLEN)) - -/* - * The current NAND data space goes from 0x80001900 to 0x80001FFF, - * which is only 0x700 = 1792 bytes long. This is too small for 2K, 4K page - * size NAND flash. Need to break the DMA down to multiple 1Ks. - * - * Need to make sure REG_NAND_DATA_PADDR + DMA_MAX_LEN < 0x80002000 - */ -#define DMA_MAX_LEN 1024 - -#else /* !USE_DMA */ -#define DMA_MIN_BUFLEN 0 -#define DMA_MAX_BUFLEN 0 -#define USE_DIRECT_IO(len) 1 -#endif -/* ---- Private Function Prototypes -------------------------------------- */ -static void bcm_umi_nand_read_buf(struct mtd_info *mtd, u_char * buf, int len); -static void bcm_umi_nand_write_buf(struct mtd_info *mtd, const u_char * buf, - int len); - -/* ---- Private Variables ------------------------------------------------ */ -static struct mtd_info *board_mtd; -static void __iomem *bcm_umi_io_base; -static void *virtPtr; -static dma_addr_t physPtr; -static struct completion nand_comp; - -/* ---- Private Functions ------------------------------------------------ */ -#if NAND_ECC_BCH -#include "bcm_umi_bch.c" -#else -#include "bcm_umi_hamming.c" -#endif - -#if USE_DMA - -/* Handler called when the DMA finishes. */ -static void nand_dma_handler(DMA_Device_t dev, int reason, void *userData) -{ - complete(&nand_comp); -} - -static int nand_dma_init(void) -{ - int rc; - - rc = dma_set_device_handler(DMA_DEVICE_NAND_MEM_TO_MEM, - nand_dma_handler, NULL); - if (rc != 0) { - printk(KERN_ERR "dma_set_device_handler failed: %d\n", rc); - return rc; - } - - virtPtr = - dma_alloc_coherent(NULL, DMA_MAX_BUFLEN, &physPtr, GFP_KERNEL); - if (virtPtr == NULL) { - printk(KERN_ERR "NAND - Failed to allocate memory for DMA buffer\n"); - return -ENOMEM; - } - - return 0; -} - -static void nand_dma_term(void) -{ - if (virtPtr != NULL) - dma_free_coherent(NULL, DMA_MAX_BUFLEN, virtPtr, physPtr); -} - -static void nand_dma_read(void *buf, int len) -{ - int offset = 0; - int tmp_len = 0; - int len_left = len; - DMA_Handle_t hndl; - - if (virtPtr == NULL) - panic("nand_dma_read: virtPtr == NULL\n"); - - if ((void *)physPtr == NULL) - panic("nand_dma_read: physPtr == NULL\n"); - - hndl = dma_request_channel(DMA_DEVICE_NAND_MEM_TO_MEM); - if (hndl < 0) { - printk(KERN_ERR - "nand_dma_read: unable to allocate dma channel: %d\n", - (int)hndl); - panic("\n"); - } - - while (len_left > 0) { - if (len_left > DMA_MAX_LEN) { - tmp_len = DMA_MAX_LEN; - len_left -= DMA_MAX_LEN; - } else { - tmp_len = len_left; - len_left = 0; - } - - init_completion(&nand_comp); - dma_transfer_mem_to_mem(hndl, REG_NAND_DATA_PADDR, - physPtr + offset, tmp_len); - wait_for_completion(&nand_comp); - - offset += tmp_len; - } - - dma_free_channel(hndl); - - if (buf != NULL) - memcpy(buf, virtPtr, len); -} - -static void nand_dma_write(const void *buf, int len) -{ - int offset = 0; - int tmp_len = 0; - int len_left = len; - DMA_Handle_t hndl; - - if (buf == NULL) - panic("nand_dma_write: buf == NULL\n"); - - if (virtPtr == NULL) - panic("nand_dma_write: virtPtr == NULL\n"); - - if ((void *)physPtr == NULL) - panic("nand_dma_write: physPtr == NULL\n"); - - memcpy(virtPtr, buf, len); - - - hndl = dma_request_channel(DMA_DEVICE_NAND_MEM_TO_MEM); - if (hndl < 0) { - printk(KERN_ERR - "nand_dma_write: unable to allocate dma channel: %d\n", - (int)hndl); - panic("\n"); - } - - while (len_left > 0) { - if (len_left > DMA_MAX_LEN) { - tmp_len = DMA_MAX_LEN; - len_left -= DMA_MAX_LEN; - } else { - tmp_len = len_left; - len_left = 0; - } - - init_completion(&nand_comp); - dma_transfer_mem_to_mem(hndl, physPtr + offset, - REG_NAND_DATA_PADDR, tmp_len); - wait_for_completion(&nand_comp); - - offset += tmp_len; - } - - dma_free_channel(hndl); -} - -#endif - -static int nand_dev_ready(struct mtd_info *mtd) -{ - return nand_bcm_umi_dev_ready(); -} - -/**************************************************************************** -* -* bcm_umi_nand_inithw -* -* This routine does the necessary hardware (board-specific) -* initializations. This includes setting up the timings, etc. -* -***************************************************************************/ -int bcm_umi_nand_inithw(void) -{ - /* Configure nand timing parameters */ - writel(readl(®_UMI_NAND_TCR) & ~0x7ffff, ®_UMI_NAND_TCR); - writel(readl(®_UMI_NAND_TCR) | HW_CFG_NAND_TCR, ®_UMI_NAND_TCR); - -#if !defined(CONFIG_MTD_NAND_BCM_UMI_HWCS) - /* enable software control of CS */ - writel(readl(®_UMI_NAND_TCR) | REG_UMI_NAND_TCR_CS_SWCTRL, ®_UMI_NAND_TCR); -#endif - - /* keep NAND chip select asserted */ - writel(readl(®_UMI_NAND_RCSR) | REG_UMI_NAND_RCSR_CS_ASSERTED, ®_UMI_NAND_RCSR); - - writel(readl(®_UMI_NAND_TCR) & ~REG_UMI_NAND_TCR_WORD16, ®_UMI_NAND_TCR); - /* enable writes to flash */ - writel(readl(®_UMI_MMD_ICR) | REG_UMI_MMD_ICR_FLASH_WP, ®_UMI_MMD_ICR); - - writel(NAND_CMD_RESET, bcm_umi_io_base + REG_NAND_CMD_OFFSET); - nand_bcm_umi_wait_till_ready(); - -#if NAND_ECC_BCH - nand_bcm_umi_bch_config_ecc(NAND_ECC_NUM_BYTES); -#endif - - return 0; -} - -/* Used to turn latch the proper register for access. */ -static void bcm_umi_nand_hwcontrol(struct mtd_info *mtd, int cmd, - unsigned int ctrl) -{ - /* send command to hardware */ - struct nand_chip *chip = mtd->priv; - if (ctrl & NAND_CTRL_CHANGE) { - if (ctrl & NAND_CLE) { - chip->IO_ADDR_W = bcm_umi_io_base + REG_NAND_CMD_OFFSET; - goto CMD; - } - if (ctrl & NAND_ALE) { - chip->IO_ADDR_W = - bcm_umi_io_base + REG_NAND_ADDR_OFFSET; - goto CMD; - } - chip->IO_ADDR_W = bcm_umi_io_base + REG_NAND_DATA8_OFFSET; - } - -CMD: - /* Send command to chip directly */ - if (cmd != NAND_CMD_NONE) - writeb(cmd, chip->IO_ADDR_W); -} - -static void bcm_umi_nand_write_buf(struct mtd_info *mtd, const u_char * buf, - int len) -{ - if (USE_DIRECT_IO(len)) { - /* Do it the old way if the buffer is small or too large. - * Probably quicker than starting and checking dma. */ - int i; - struct nand_chip *this = mtd->priv; - - for (i = 0; i < len; i++) - writeb(buf[i], this->IO_ADDR_W); - } -#if USE_DMA - else - nand_dma_write(buf, len); -#endif -} - -static void bcm_umi_nand_read_buf(struct mtd_info *mtd, u_char * buf, int len) -{ - if (USE_DIRECT_IO(len)) { - int i; - struct nand_chip *this = mtd->priv; - - for (i = 0; i < len; i++) - buf[i] = readb(this->IO_ADDR_R); - } -#if USE_DMA - else - nand_dma_read(buf, len); -#endif -} - -static uint8_t readbackbuf[NAND_MAX_PAGESIZE]; -static int bcm_umi_nand_verify_buf(struct mtd_info *mtd, const u_char * buf, - int len) -{ - /* - * Try to readback page with ECC correction. This is necessary - * for MLC parts which may have permanently stuck bits. - */ - struct nand_chip *chip = mtd->priv; - int ret = chip->ecc.read_page(mtd, chip, readbackbuf, 0, 0); - if (ret < 0) - return -EFAULT; - else { - if (memcmp(readbackbuf, buf, len) == 0) - return 0; - - return -EFAULT; - } - return 0; -} - -static int __devinit bcm_umi_nand_probe(struct platform_device *pdev) -{ - struct nand_chip *this; - struct resource *r; - int err = 0; - - printk(gBanner); - - /* Allocate memory for MTD device structure and private data */ - board_mtd = - kmalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip), - GFP_KERNEL); - if (!board_mtd) { - printk(KERN_WARNING - "Unable to allocate NAND MTD device structure.\n"); - return -ENOMEM; - } - - r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - if (!r) { - err = -ENXIO; - goto out_free; - } - - /* map physical address */ - bcm_umi_io_base = ioremap(r->start, resource_size(r)); - - if (!bcm_umi_io_base) { - printk(KERN_ERR "ioremap to access BCM UMI NAND chip failed\n"); - err = -EIO; - goto out_free; - } - - /* Get pointer to private data */ - this = (struct nand_chip *)(&board_mtd[1]); - - /* Initialize structures */ - memset((char *)board_mtd, 0, sizeof(struct mtd_info)); - memset((char *)this, 0, sizeof(struct nand_chip)); - - /* Link the private data with the MTD structure */ - board_mtd->priv = this; - - /* Initialize the NAND hardware. */ - if (bcm_umi_nand_inithw() < 0) { - printk(KERN_ERR "BCM UMI NAND chip could not be initialized\n"); - err = -EIO; - goto out_unmap; - } - - /* Set address of NAND IO lines */ - this->IO_ADDR_W = bcm_umi_io_base + REG_NAND_DATA8_OFFSET; - this->IO_ADDR_R = bcm_umi_io_base + REG_NAND_DATA8_OFFSET; - - /* Set command delay time, see datasheet for correct value */ - this->chip_delay = 0; - /* Assign the device ready function, if available */ - this->dev_ready = nand_dev_ready; - this->options = 0; - - this->write_buf = bcm_umi_nand_write_buf; - this->read_buf = bcm_umi_nand_read_buf; - this->verify_buf = bcm_umi_nand_verify_buf; - - this->cmd_ctrl = bcm_umi_nand_hwcontrol; - this->ecc.mode = NAND_ECC_HW; - this->ecc.size = 512; - this->ecc.bytes = NAND_ECC_NUM_BYTES; -#if NAND_ECC_BCH - this->ecc.read_page = bcm_umi_bch_read_page_hwecc; - this->ecc.write_page = bcm_umi_bch_write_page_hwecc; -#else - this->ecc.correct = nand_correct_data512; - this->ecc.calculate = bcm_umi_hamming_get_hw_ecc; - this->ecc.hwctl = bcm_umi_hamming_enable_hwecc; -#endif - -#if USE_DMA - err = nand_dma_init(); - if (err != 0) - goto out_unmap; -#endif - - /* Figure out the size of the device that we have. - * We need to do this to figure out which ECC - * layout we'll be using. - */ - - err = nand_scan_ident(board_mtd, 1, NULL); - if (err) { - printk(KERN_ERR "nand_scan failed: %d\n", err); - goto out_unmap; - } - - /* Now that we know the nand size, we can setup the ECC layout */ - - switch (board_mtd->writesize) { /* writesize is the pagesize */ - case 4096: - this->ecc.layout = &nand_hw_eccoob_4096; - break; - case 2048: - this->ecc.layout = &nand_hw_eccoob_2048; - break; - case 512: - this->ecc.layout = &nand_hw_eccoob_512; - break; - default: - { - printk(KERN_ERR "NAND - Unrecognized pagesize: %d\n", - board_mtd->writesize); - err = -EINVAL; - goto out_unmap; - } - } - -#if NAND_ECC_BCH - if (board_mtd->writesize > 512) { - if (this->bbt_options & NAND_BBT_USE_FLASH) - largepage_bbt.options = NAND_BBT_SCAN2NDPAGE; - this->badblock_pattern = &largepage_bbt; - } - - this->ecc.strength = 8; - -#endif - - /* Now finish off the scan, now that ecc.layout has been initialized. */ - - err = nand_scan_tail(board_mtd); - if (err) { - printk(KERN_ERR "nand_scan failed: %d\n", err); - goto out_unmap; - } - - /* Register the partitions */ - board_mtd->name = "bcm_umi-nand"; - mtd_device_parse_register(board_mtd, NULL, NULL, NULL, 0); - - /* Return happy */ - return 0; -out_unmap: - iounmap(bcm_umi_io_base); -out_free: - kfree(board_mtd); - return err; -} - -static int bcm_umi_nand_remove(struct platform_device *pdev) -{ -#if USE_DMA - nand_dma_term(); -#endif - - /* Release resources, unregister device */ - nand_release(board_mtd); - - /* unmap physical address */ - iounmap(bcm_umi_io_base); - - /* Free the MTD device structure */ - kfree(board_mtd); - - return 0; -} - -#ifdef CONFIG_PM -static int bcm_umi_nand_suspend(struct platform_device *pdev, - pm_message_t state) -{ - printk(KERN_ERR "MTD NAND suspend is being called\n"); - return 0; -} - -static int bcm_umi_nand_resume(struct platform_device *pdev) -{ - printk(KERN_ERR "MTD NAND resume is being called\n"); - return 0; -} -#else -#define bcm_umi_nand_suspend NULL -#define bcm_umi_nand_resume NULL -#endif - -static struct platform_driver nand_driver = { - .driver = { - .name = "bcm-nand", - .owner = THIS_MODULE, - }, - .probe = bcm_umi_nand_probe, - .remove = bcm_umi_nand_remove, - .suspend = bcm_umi_nand_suspend, - .resume = bcm_umi_nand_resume, -}; - -module_platform_driver(nand_driver); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Broadcom"); -MODULE_DESCRIPTION("BCM UMI MTD NAND driver"); diff --git a/drivers/mtd/nand/bf5xx_nand.c b/drivers/mtd/nand/bf5xx_nand.c index 3f1c185..ab0caa7 100644 --- a/drivers/mtd/nand/bf5xx_nand.c +++ b/drivers/mtd/nand/bf5xx_nand.c @@ -566,11 +566,13 @@ static int bf5xx_nand_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip return 0; } -static void bf5xx_nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, - const uint8_t *buf, int oob_required) +static int bf5xx_nand_write_page_raw(struct mtd_info *mtd, + struct nand_chip *chip, const uint8_t *buf, int oob_required) { bf5xx_nand_write_buf(mtd, buf, mtd->writesize); bf5xx_nand_write_buf(mtd, chip->oob_poi, mtd->oobsize); + + return 0; } /* diff --git a/drivers/mtd/nand/cafe_nand.c b/drivers/mtd/nand/cafe_nand.c index f3f6cfe..2bb7170 100644 --- a/drivers/mtd/nand/cafe_nand.c +++ b/drivers/mtd/nand/cafe_nand.c @@ -377,7 +377,7 @@ static int cafe_nand_read_oob(struct mtd_info *mtd, struct nand_chip *chip, * @buf: buffer to store read data * @oob_required: caller expects OOB data read to chip->oob_poi * - * The hw generator calculates the error syndrome automatically. Therefor + * The hw generator calculates the error syndrome automatically. Therefore * we need a special oob layout and handling. */ static int cafe_nand_read_page(struct mtd_info *mtd, struct nand_chip *chip, @@ -520,7 +520,7 @@ static struct nand_bbt_descr cafe_bbt_mirror_descr_512 = { }; -static void cafe_nand_write_page_lowlevel(struct mtd_info *mtd, +static int cafe_nand_write_page_lowlevel(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required) { @@ -531,6 +531,8 @@ static void cafe_nand_write_page_lowlevel(struct mtd_info *mtd, /* Set up ECC autogeneration */ cafe->ctl2 |= (1<<30); + + return 0; } static int cafe_nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, @@ -542,9 +544,12 @@ static int cafe_nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); if (unlikely(raw)) - chip->ecc.write_page_raw(mtd, chip, buf, oob_required); + status = chip->ecc.write_page_raw(mtd, chip, buf, oob_required); else - chip->ecc.write_page(mtd, chip, buf, oob_required); + status = chip->ecc.write_page(mtd, chip, buf, oob_required); + + if (status < 0) + return status; /* * Cached progamming disabled for now, Not sure if its worth the @@ -571,13 +576,6 @@ static int cafe_nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, status = chip->waitfunc(mtd, chip); } -#ifdef CONFIG_MTD_NAND_VERIFY_WRITE - /* Send command to read back the data */ - chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); - - if (chip->verify_buf(mtd, buf, mtd->writesize)) - return -EIO; -#endif return 0; } diff --git a/drivers/mtd/nand/cmx270_nand.c b/drivers/mtd/nand/cmx270_nand.c index 1024bfc..39b2ef8 100644 --- a/drivers/mtd/nand/cmx270_nand.c +++ b/drivers/mtd/nand/cmx270_nand.c @@ -76,18 +76,6 @@ static void cmx270_read_buf(struct mtd_info *mtd, u_char *buf, int len) *buf++ = readl(this->IO_ADDR_R) >> 16; } -static int cmx270_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) -{ - int i; - struct nand_chip *this = mtd->priv; - - for (i=0; i<len; i++) - if (buf[i] != (u_char)(readl(this->IO_ADDR_R) >> 16)) - return -EFAULT; - - return 0; -} - static inline void nand_cs_on(void) { gpio_set_value(GPIO_NAND_CS, 0); @@ -209,7 +197,6 @@ static int __init cmx270_init(void) this->read_byte = cmx270_read_byte; this->read_buf = cmx270_read_buf; this->write_buf = cmx270_write_buf; - this->verify_buf = cmx270_verify_buf; /* Scan to find existence of the device */ if (nand_scan (cmx270_nand_mtd, 1)) { diff --git a/drivers/mtd/nand/davinci_nand.c b/drivers/mtd/nand/davinci_nand.c index f1deb1e..945047a 100644 --- a/drivers/mtd/nand/davinci_nand.c +++ b/drivers/mtd/nand/davinci_nand.c @@ -33,6 +33,7 @@ #include <linux/mtd/nand.h> #include <linux/mtd/partitions.h> #include <linux/slab.h> +#include <linux/of_device.h> #include <linux/platform_data/mtd-davinci.h> #include <linux/platform_data/mtd-davinci-aemif.h> @@ -518,9 +519,75 @@ static struct nand_ecclayout hwecc4_2048 __initconst = { }, }; +#if defined(CONFIG_OF) +static const struct of_device_id davinci_nand_of_match[] = { + {.compatible = "ti,davinci-nand", }, + {}, +} +MODULE_DEVICE_TABLE(of, davinci_nand_of_match); + +static struct davinci_nand_pdata + *nand_davinci_get_pdata(struct platform_device *pdev) +{ + if (!pdev->dev.platform_data && pdev->dev.of_node) { + struct davinci_nand_pdata *pdata; + const char *mode; + u32 prop; + int len; + + pdata = devm_kzalloc(&pdev->dev, + sizeof(struct davinci_nand_pdata), + GFP_KERNEL); + pdev->dev.platform_data = pdata; + if (!pdata) + return NULL; + if (!of_property_read_u32(pdev->dev.of_node, + "ti,davinci-chipselect", &prop)) + pdev->id = prop; + if (!of_property_read_u32(pdev->dev.of_node, + "ti,davinci-mask-ale", &prop)) + pdata->mask_ale = prop; + if (!of_property_read_u32(pdev->dev.of_node, + "ti,davinci-mask-cle", &prop)) + pdata->mask_cle = prop; + if (!of_property_read_u32(pdev->dev.of_node, + "ti,davinci-mask-chipsel", &prop)) + pdata->mask_chipsel = prop; + if (!of_property_read_string(pdev->dev.of_node, + "ti,davinci-ecc-mode", &mode)) { + if (!strncmp("none", mode, 4)) + pdata->ecc_mode = NAND_ECC_NONE; + if (!strncmp("soft", mode, 4)) + pdata->ecc_mode = NAND_ECC_SOFT; + if (!strncmp("hw", mode, 2)) + pdata->ecc_mode = NAND_ECC_HW; + } + if (!of_property_read_u32(pdev->dev.of_node, + "ti,davinci-ecc-bits", &prop)) + pdata->ecc_bits = prop; + if (!of_property_read_u32(pdev->dev.of_node, + "ti,davinci-nand-buswidth", &prop)) + if (prop == 16) + pdata->options |= NAND_BUSWIDTH_16; + if (of_find_property(pdev->dev.of_node, + "ti,davinci-nand-use-bbt", &len)) + pdata->bbt_options = NAND_BBT_USE_FLASH; + } + + return pdev->dev.platform_data; +} +#else +#define davinci_nand_of_match NULL +static struct davinci_nand_pdata + *nand_davinci_get_pdata(struct platform_device *pdev) +{ + return pdev->dev.platform_data; +} +#endif + static int __init nand_davinci_probe(struct platform_device *pdev) { - struct davinci_nand_pdata *pdata = pdev->dev.platform_data; + struct davinci_nand_pdata *pdata; struct davinci_nand_info *info; struct resource *res1; struct resource *res2; @@ -530,6 +597,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev) uint32_t val; nand_ecc_modes_t ecc_mode; + pdata = nand_davinci_get_pdata(pdev); /* insist on board-specific configuration */ if (!pdata) return -ENODEV; @@ -656,7 +724,7 @@ static int __init nand_davinci_probe(struct platform_device *pdev) goto err_clk; } - ret = clk_enable(info->clk); + ret = clk_prepare_enable(info->clk); if (ret < 0) { dev_dbg(&pdev->dev, "unable to enable AEMIF clock, err %d\n", ret); @@ -767,7 +835,7 @@ syndrome_done: err_scan: err_timing: - clk_disable(info->clk); + clk_disable_unprepare(info->clk); err_clk_enable: clk_put(info->clk); @@ -804,7 +872,7 @@ static int __exit nand_davinci_remove(struct platform_device *pdev) nand_release(&info->mtd); - clk_disable(info->clk); + clk_disable_unprepare(info->clk); clk_put(info->clk); kfree(info); @@ -816,6 +884,8 @@ static struct platform_driver nand_davinci_driver = { .remove = __exit_p(nand_davinci_remove), .driver = { .name = "davinci_nand", + .owner = THIS_MODULE, + .of_match_table = davinci_nand_of_match, }, }; MODULE_ALIAS("platform:davinci_nand"); diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 0650aaf..e706a23 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -1028,7 +1028,7 @@ static void denali_setup_dma(struct denali_nand_info *denali, int op) /* writes a page. user specifies type, and this function handles the * configuration details. */ -static void write_page(struct mtd_info *mtd, struct nand_chip *chip, +static int write_page(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, bool raw_xfer) { struct denali_nand_info *denali = mtd_to_denali(mtd); @@ -1078,6 +1078,8 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip, denali_enable_dma(denali, false); dma_sync_single_for_cpu(denali->dev, addr, size, DMA_TO_DEVICE); + + return 0; } /* NAND core entry points */ @@ -1086,24 +1088,24 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *chip, * writing a page with ECC or without is similar, all the work is done * by write_page above. * */ -static void denali_write_page(struct mtd_info *mtd, struct nand_chip *chip, +static int denali_write_page(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required) { /* for regular page writes, we let HW handle all the ECC * data written to the device. */ - write_page(mtd, chip, buf, false); + return write_page(mtd, chip, buf, false); } /* This is the callback that the NAND core calls to write a page without ECC. * raw access is similar to ECC page writes, so all the work is done in the * write_page() function above. */ -static void denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, +static int denali_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required) { /* for raw page writes, we want to disable ECC and simply write whatever data is in the buffer. */ - write_page(mtd, chip, buf, true); + return write_page(mtd, chip, buf, true); } static int denali_write_oob(struct mtd_info *mtd, struct nand_chip *chip, diff --git a/drivers/mtd/nand/diskonchip.c b/drivers/mtd/nand/diskonchip.c index e2ca067..256eb30 100644 --- a/drivers/mtd/nand/diskonchip.c +++ b/drivers/mtd/nand/diskonchip.c @@ -376,19 +376,6 @@ static void doc2000_readbuf_dword(struct mtd_info *mtd, u_char *buf, int len) } } -static int doc2000_verifybuf(struct mtd_info *mtd, const u_char *buf, int len) -{ - struct nand_chip *this = mtd->priv; - struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; - int i; - - for (i = 0; i < len; i++) - if (buf[i] != ReadDOC(docptr, 2k_CDSN_IO)) - return -EFAULT; - return 0; -} - static uint16_t __init doc200x_ident_chip(struct mtd_info *mtd, int nr) { struct nand_chip *this = mtd->priv; @@ -526,26 +513,6 @@ static void doc2001_readbuf(struct mtd_info *mtd, u_char *buf, int len) buf[i] = ReadDOC(docptr, LastDataRead); } -static int doc2001_verifybuf(struct mtd_info *mtd, const u_char *buf, int len) -{ - struct nand_chip *this = mtd->priv; - struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; - int i; - - /* Start read pipeline */ - ReadDOC(docptr, ReadPipeInit); - - for (i = 0; i < len - 1; i++) - if (buf[i] != ReadDOC(docptr, Mil_CDSN_IO)) { - ReadDOC(docptr, LastDataRead); - return i; - } - if (buf[i] != ReadDOC(docptr, LastDataRead)) - return i; - return 0; -} - static u_char doc2001plus_read_byte(struct mtd_info *mtd) { struct nand_chip *this = mtd->priv; @@ -610,33 +577,6 @@ static void doc2001plus_readbuf(struct mtd_info *mtd, u_char *buf, int len) printk("\n"); } -static int doc2001plus_verifybuf(struct mtd_info *mtd, const u_char *buf, int len) -{ - struct nand_chip *this = mtd->priv; - struct doc_priv *doc = this->priv; - void __iomem *docptr = doc->virtadr; - int i; - - if (debug) - printk("verifybuf of %d bytes: ", len); - - /* Start read pipeline */ - ReadDOC(docptr, Mplus_ReadPipeInit); - ReadDOC(docptr, Mplus_ReadPipeInit); - - for (i = 0; i < len - 2; i++) - if (buf[i] != ReadDOC(docptr, Mil_CDSN_IO)) { - ReadDOC(docptr, Mplus_LastDataRead); - ReadDOC(docptr, Mplus_LastDataRead); - return i; - } - if (buf[len - 2] != ReadDOC(docptr, Mplus_LastDataRead)) - return len - 2; - if (buf[len - 1] != ReadDOC(docptr, Mplus_LastDataRead)) - return len - 1; - return 0; -} - static void doc2001plus_select_chip(struct mtd_info *mtd, int chip) { struct nand_chip *this = mtd->priv; @@ -1432,7 +1372,6 @@ static inline int __init doc2000_init(struct mtd_info *mtd) this->read_byte = doc2000_read_byte; this->write_buf = doc2000_writebuf; this->read_buf = doc2000_readbuf; - this->verify_buf = doc2000_verifybuf; this->scan_bbt = nftl_scan_bbt; doc->CDSNControl = CDSN_CTRL_FLASH_IO | CDSN_CTRL_ECC_IO; @@ -1449,7 +1388,6 @@ static inline int __init doc2001_init(struct mtd_info *mtd) this->read_byte = doc2001_read_byte; this->write_buf = doc2001_writebuf; this->read_buf = doc2001_readbuf; - this->verify_buf = doc2001_verifybuf; ReadDOC(doc->virtadr, ChipID); ReadDOC(doc->virtadr, ChipID); @@ -1480,7 +1418,6 @@ static inline int __init doc2001plus_init(struct mtd_info *mtd) this->read_byte = doc2001plus_read_byte; this->write_buf = doc2001plus_writebuf; this->read_buf = doc2001plus_readbuf; - this->verify_buf = doc2001plus_verifybuf; this->scan_bbt = inftl_scan_bbt; this->cmd_ctrl = NULL; this->select_chip = doc2001plus_select_chip; diff --git a/drivers/mtd/nand/docg4.c b/drivers/mtd/nand/docg4.c index a225e49..799da5d 100644 --- a/drivers/mtd/nand/docg4.c +++ b/drivers/mtd/nand/docg4.c @@ -378,9 +378,9 @@ static int correct_data(struct mtd_info *mtd, uint8_t *buf, int page) * bit flips(s) are not reported in stats. */ - if (doc->oob_buf[15]) { + if (nand->oob_poi[15]) { int bit, numsetbits = 0; - unsigned long written_flag = doc->oob_buf[15]; + unsigned long written_flag = nand->oob_poi[15]; for_each_set_bit(bit, &written_flag, 8) numsetbits++; if (numsetbits > 4) { /* assume blank */ @@ -428,7 +428,7 @@ static int correct_data(struct mtd_info *mtd, uint8_t *buf, int page) /* if error within oob area preceeding ecc bytes... */ if (errpos[i] > DOCG4_PAGE_SIZE * 8) change_bit(errpos[i] - DOCG4_PAGE_SIZE * 8, - (unsigned long *)doc->oob_buf); + (unsigned long *)nand->oob_poi); else /* error in page data */ change_bit(errpos[i], (unsigned long *)buf); @@ -748,18 +748,12 @@ static int read_page(struct mtd_info *mtd, struct nand_chip *nand, docg4_read_buf(mtd, buf, DOCG4_PAGE_SIZE); /* read the page data */ - /* - * Diskonchips read oob immediately after a page read. Mtd - * infrastructure issues a separate command for reading oob after the - * page is read. So we save the oob bytes in a local buffer and just - * copy it if the next command reads oob from the same page. - */ - + /* this device always reads oob after page data */ /* first 14 oob bytes read from I/O reg */ - docg4_read_buf(mtd, doc->oob_buf, 14); + docg4_read_buf(mtd, nand->oob_poi, 14); /* last 2 read from another reg */ - buf16 = (uint16_t *)(doc->oob_buf + 14); + buf16 = (uint16_t *)(nand->oob_poi + 14); *buf16 = readw(docptr + DOCG4_MYSTERY_REG); write_nop(docptr); @@ -782,6 +776,8 @@ static int read_page(struct mtd_info *mtd, struct nand_chip *nand, } writew(0, docptr + DOC_DATAEND); + if (bits_corrected == -EBADMSG) /* uncorrectable errors */ + return 0; return bits_corrected; } @@ -807,21 +803,6 @@ static int docg4_read_oob(struct mtd_info *mtd, struct nand_chip *nand, dev_dbg(doc->dev, "%s: page %x\n", __func__, page); - /* - * Oob bytes are read as part of a normal page read. If the previous - * nand command was a read of the page whose oob is now being read, just - * copy the oob bytes that we saved in a local buffer and avoid a - * separate oob read. - */ - if (doc->last_command.command == NAND_CMD_READ0 && - doc->last_command.page == page) { - memcpy(nand->oob_poi, doc->oob_buf, 16); - return 0; - } - - /* - * Separate read of oob data only. - */ docg4_command(mtd, NAND_CMD_READ0, nand->ecc.size, page); writew(DOC_ECCCONF0_READ_MODE | DOCG4_OOB_SIZE, docptr + DOC_ECCCONF0); @@ -898,7 +879,7 @@ static void docg4_erase_block(struct mtd_info *mtd, int page) write_nop(docptr); } -static void write_page(struct mtd_info *mtd, struct nand_chip *nand, +static int write_page(struct mtd_info *mtd, struct nand_chip *nand, const uint8_t *buf, bool use_ecc) { struct docg4_priv *doc = nand->priv; @@ -950,15 +931,17 @@ static void write_page(struct mtd_info *mtd, struct nand_chip *nand, write_nop(docptr); writew(0, docptr + DOC_DATAEND); write_nop(docptr); + + return 0; } -static void docg4_write_page_raw(struct mtd_info *mtd, struct nand_chip *nand, +static int docg4_write_page_raw(struct mtd_info *mtd, struct nand_chip *nand, const uint8_t *buf, int oob_required) { return write_page(mtd, nand, buf, false); } -static void docg4_write_page(struct mtd_info *mtd, struct nand_chip *nand, +static int docg4_write_page(struct mtd_info *mtd, struct nand_chip *nand, const uint8_t *buf, int oob_required) { return write_page(mtd, nand, buf, true); diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 7842938..cc1480a 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -614,41 +614,6 @@ static void fsl_elbc_read_buf(struct mtd_info *mtd, u8 *buf, int len) len, avail); } -/* - * Verify buffer against the FCM Controller Data Buffer - */ -static int fsl_elbc_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) -{ - struct nand_chip *chip = mtd->priv; - struct fsl_elbc_mtd *priv = chip->priv; - struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = priv->ctrl->nand; - int i; - - if (len < 0) { - dev_err(priv->dev, "write_buf of %d bytes", len); - return -EINVAL; - } - - if ((unsigned int)len > - elbc_fcm_ctrl->read_bytes - elbc_fcm_ctrl->index) { - dev_err(priv->dev, - "verify_buf beyond end of buffer " - "(%d requested, %u available)\n", - len, elbc_fcm_ctrl->read_bytes - elbc_fcm_ctrl->index); - - elbc_fcm_ctrl->index = elbc_fcm_ctrl->read_bytes; - return -EINVAL; - } - - for (i = 0; i < len; i++) - if (in_8(&elbc_fcm_ctrl->addr[elbc_fcm_ctrl->index + i]) - != buf[i]) - break; - - elbc_fcm_ctrl->index += len; - return i == len && elbc_fcm_ctrl->status == LTESR_CC ? 0 : -EIO; -} - /* This function is called after Program and Erase Operations to * check for success or failure. */ @@ -766,11 +731,13 @@ static int fsl_elbc_read_page(struct mtd_info *mtd, struct nand_chip *chip, /* ECC will be calculated automatically, and errors will be detected in * waitfunc. */ -static void fsl_elbc_write_page(struct mtd_info *mtd, struct nand_chip *chip, +static int fsl_elbc_write_page(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required) { fsl_elbc_write_buf(mtd, buf, mtd->writesize); fsl_elbc_write_buf(mtd, chip->oob_poi, mtd->oobsize); + + return 0; } static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv) @@ -796,7 +763,6 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv) chip->read_byte = fsl_elbc_read_byte; chip->write_buf = fsl_elbc_write_buf; chip->read_buf = fsl_elbc_read_buf; - chip->verify_buf = fsl_elbc_verify_buf; chip->select_chip = fsl_elbc_select_chip; chip->cmdfunc = fsl_elbc_cmdfunc; chip->waitfunc = fsl_elbc_wait; @@ -805,7 +771,6 @@ static int fsl_elbc_chip_init(struct fsl_elbc_mtd *priv) chip->bbt_md = &bbt_mirror_descr; /* set up nand options */ - chip->options = NAND_NO_READRDY; chip->bbt_options = NAND_BBT_USE_FLASH; chip->controller = &elbc_fcm_ctrl->controller; @@ -916,7 +881,8 @@ static int __devinit fsl_elbc_nand_probe(struct platform_device *pdev) elbc_fcm_ctrl->chips[bank] = priv; priv->bank = bank; priv->ctrl = fsl_lbc_ctrl_dev; - priv->dev = dev; + priv->dev = &pdev->dev; + dev_set_drvdata(priv->dev, priv); priv->vbase = ioremap(res.start, resource_size(&res)); if (!priv->vbase) { @@ -963,11 +929,10 @@ err: static int fsl_elbc_nand_remove(struct platform_device *pdev) { - int i; struct fsl_elbc_fcm_ctrl *elbc_fcm_ctrl = fsl_lbc_ctrl_dev->nand; - for (i = 0; i < MAX_BANKS; i++) - if (elbc_fcm_ctrl->chips[i]) - fsl_elbc_chip_remove(elbc_fcm_ctrl->chips[i]); + struct fsl_elbc_mtd *priv = dev_get_drvdata(&pdev->dev); + + fsl_elbc_chip_remove(priv); mutex_lock(&fsl_elbc_nand_mutex); elbc_fcm_ctrl->counter--; diff --git a/drivers/mtd/nand/fsl_ifc_nand.c b/drivers/mtd/nand/fsl_ifc_nand.c index 01e2f2e..3551a99 100644 --- a/drivers/mtd/nand/fsl_ifc_nand.c +++ b/drivers/mtd/nand/fsl_ifc_nand.c @@ -194,7 +194,7 @@ static int is_blank(struct mtd_info *mtd, unsigned int bufnum) struct nand_chip *chip = mtd->priv; struct fsl_ifc_mtd *priv = chip->priv; u8 __iomem *addr = priv->vbase + bufnum * (mtd->writesize * 2); - u32 __iomem *mainarea = (u32 *)addr; + u32 __iomem *mainarea = (u32 __iomem *)addr; u8 __iomem *oob = addr + mtd->writesize; int i; @@ -592,8 +592,8 @@ static uint8_t fsl_ifc_read_byte16(struct mtd_info *mtd) * next byte. */ if (ifc_nand_ctrl->index < ifc_nand_ctrl->read_bytes) { - data = in_be16((uint16_t *)&ifc_nand_ctrl-> - addr[ifc_nand_ctrl->index]); + data = in_be16((uint16_t __iomem *)&ifc_nand_ctrl-> + addr[ifc_nand_ctrl->index]); ifc_nand_ctrl->index += 2; return (uint8_t) data; } @@ -628,46 +628,6 @@ static void fsl_ifc_read_buf(struct mtd_info *mtd, u8 *buf, int len) } /* - * Verify buffer against the IFC Controller Data Buffer - */ -static int fsl_ifc_verify_buf(struct mtd_info *mtd, - const u_char *buf, int len) -{ - struct nand_chip *chip = mtd->priv; - struct fsl_ifc_mtd *priv = chip->priv; - struct fsl_ifc_ctrl *ctrl = priv->ctrl; - struct fsl_ifc_nand_ctrl *nctrl = ifc_nand_ctrl; - int i; - - if (len < 0) { - dev_err(priv->dev, "%s: write_buf of %d bytes", __func__, len); - return -EINVAL; - } - - if ((unsigned int)len > nctrl->read_bytes - nctrl->index) { - dev_err(priv->dev, - "%s: beyond end of buffer (%d requested, %u available)\n", - __func__, len, nctrl->read_bytes - nctrl->index); - - nctrl->index = nctrl->read_bytes; - return -EINVAL; - } - - for (i = 0; i < len; i++) - if (in_8(&nctrl->addr[nctrl->index + i]) != buf[i]) - break; - - nctrl->index += len; - - if (i != len) - return -EIO; - if (ctrl->nand_stat != IFC_NAND_EVTER_STAT_OPC) - return -EIO; - - return 0; -} - -/* * This function is called after Program and Erase Operations to * check for success or failure. */ @@ -722,11 +682,13 @@ static int fsl_ifc_read_page(struct mtd_info *mtd, struct nand_chip *chip, /* ECC will be calculated automatically, and errors will be detected in * waitfunc. */ -static void fsl_ifc_write_page(struct mtd_info *mtd, struct nand_chip *chip, +static int fsl_ifc_write_page(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required) { fsl_ifc_write_buf(mtd, buf, mtd->writesize); fsl_ifc_write_buf(mtd, chip->oob_poi, mtd->oobsize); + + return 0; } static int fsl_ifc_chip_init_tail(struct mtd_info *mtd) @@ -844,7 +806,6 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) chip->write_buf = fsl_ifc_write_buf; chip->read_buf = fsl_ifc_read_buf; - chip->verify_buf = fsl_ifc_verify_buf; chip->select_chip = fsl_ifc_select_chip; chip->cmdfunc = fsl_ifc_cmdfunc; chip->waitfunc = fsl_ifc_wait; @@ -855,7 +816,6 @@ static int fsl_ifc_chip_init(struct fsl_ifc_mtd *priv) out_be32(&ifc->ifc_nand.ncfgr, 0x0); /* set up nand options */ - chip->options = NAND_NO_READRDY; chip->bbt_options = NAND_BBT_USE_FLASH; diff --git a/drivers/mtd/nand/gpio.c b/drivers/mtd/nand/gpio.c index 27000a5..bc73bc5 100644 --- a/drivers/mtd/nand/gpio.c +++ b/drivers/mtd/nand/gpio.c @@ -100,23 +100,6 @@ static void gpio_nand_readbuf(struct mtd_info *mtd, u_char *buf, int len) readsb(this->IO_ADDR_R, buf, len); } -static int gpio_nand_verifybuf(struct mtd_info *mtd, const u_char *buf, int len) -{ - struct nand_chip *this = mtd->priv; - unsigned char read, *p = (unsigned char *) buf; - int i, err = 0; - - for (i = 0; i < len; i++) { - read = readb(this->IO_ADDR_R); - if (read != p[i]) { - pr_debug("%s: err at %d (read %04x vs %04x)\n", - __func__, i, read, p[i]); - err = -EFAULT; - } - } - return err; -} - static void gpio_nand_writebuf16(struct mtd_info *mtd, const u_char *buf, int len) { @@ -148,26 +131,6 @@ static void gpio_nand_readbuf16(struct mtd_info *mtd, u_char *buf, int len) } } -static int gpio_nand_verifybuf16(struct mtd_info *mtd, const u_char *buf, - int len) -{ - struct nand_chip *this = mtd->priv; - unsigned short read, *p = (unsigned short *) buf; - int i, err = 0; - len >>= 1; - - for (i = 0; i < len; i++) { - read = readw(this->IO_ADDR_R); - if (read != p[i]) { - pr_debug("%s: err at %d (read %04x vs %04x)\n", - __func__, i, read, p[i]); - err = -EFAULT; - } - } - return err; -} - - static int gpio_nand_devready(struct mtd_info *mtd) { struct gpiomtd *gpiomtd = gpio_nand_getpriv(mtd); @@ -391,11 +354,9 @@ static int __devinit gpio_nand_probe(struct platform_device *dev) if (this->options & NAND_BUSWIDTH_16) { this->read_buf = gpio_nand_readbuf16; this->write_buf = gpio_nand_writebuf16; - this->verify_buf = gpio_nand_verifybuf16; } else { this->read_buf = gpio_nand_readbuf; this->write_buf = gpio_nand_writebuf; - this->verify_buf = gpio_nand_verifybuf; } /* set the mtd private data for the nand driver */ @@ -456,20 +417,7 @@ static struct platform_driver gpio_nand_driver = { }, }; -static int __init gpio_nand_init(void) -{ - printk(KERN_INFO "GPIO NAND driver, © 2004 Simtec Electronics\n"); - - return platform_driver_register(&gpio_nand_driver); -} - -static void __exit gpio_nand_exit(void) -{ - platform_driver_unregister(&gpio_nand_driver); -} - -module_init(gpio_nand_init); -module_exit(gpio_nand_exit); +module_platform_driver(gpio_nand_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c index a1f4332..3502acc 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-lib.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-lib.c @@ -26,7 +26,7 @@ #include "gpmi-regs.h" #include "bch-regs.h" -struct timing_threshod timing_default_threshold = { +static struct timing_threshod timing_default_threshold = { .max_data_setup_cycles = (BM_GPMI_TIMING0_DATA_SETUP >> BP_GPMI_TIMING0_DATA_SETUP), .internal_data_setup_in_ns = 0, @@ -124,12 +124,42 @@ error: return -ETIMEDOUT; } +static int __gpmi_enable_clk(struct gpmi_nand_data *this, bool v) +{ + struct clk *clk; + int ret; + int i; + + for (i = 0; i < GPMI_CLK_MAX; i++) { + clk = this->resources.clock[i]; + if (!clk) + break; + + if (v) { + ret = clk_prepare_enable(clk); + if (ret) + goto err_clk; + } else { + clk_disable_unprepare(clk); + } + } + return 0; + +err_clk: + for (; i > 0; i--) + clk_disable_unprepare(this->resources.clock[i - 1]); + return ret; +} + +#define gpmi_enable_clk(x) __gpmi_enable_clk(x, true) +#define gpmi_disable_clk(x) __gpmi_enable_clk(x, false) + int gpmi_init(struct gpmi_nand_data *this) { struct resources *r = &this->resources; int ret; - ret = clk_prepare_enable(r->clock); + ret = gpmi_enable_clk(this); if (ret) goto err_out; ret = gpmi_reset_block(r->gpmi_regs, false); @@ -149,7 +179,7 @@ int gpmi_init(struct gpmi_nand_data *this) /* Select BCH ECC. */ writel(BM_GPMI_CTRL1_BCH_MODE, r->gpmi_regs + HW_GPMI_CTRL1_SET); - clk_disable_unprepare(r->clock); + gpmi_disable_clk(this); return 0; err_out: return ret; @@ -205,7 +235,7 @@ int bch_set_geometry(struct gpmi_nand_data *this) ecc_strength = bch_geo->ecc_strength >> 1; page_size = bch_geo->page_size; - ret = clk_prepare_enable(r->clock); + ret = gpmi_enable_clk(this); if (ret) goto err_out; @@ -240,7 +270,7 @@ int bch_set_geometry(struct gpmi_nand_data *this) writel(BM_BCH_CTRL_COMPLETE_IRQ_EN, r->bch_regs + HW_BCH_CTRL_SET); - clk_disable_unprepare(r->clock); + gpmi_disable_clk(this); return 0; err_out: return ret; @@ -263,6 +293,7 @@ static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this, struct gpmi_nfc_hardware_timing *hw) { struct timing_threshod *nfc = &timing_default_threshold; + struct resources *r = &this->resources; struct nand_chip *nand = &this->nand; struct nand_timing target = this->timing; bool improved_timing_is_available; @@ -302,8 +333,9 @@ static int gpmi_nfc_compute_hardware_timing(struct gpmi_nand_data *this, (target.tRHOH_in_ns >= 0) ; /* Inspect the clock. */ + nfc->clock_frequency_in_hz = clk_get_rate(r->clock[0]); clock_frequency_in_hz = nfc->clock_frequency_in_hz; - clock_period_in_ns = 1000000000 / clock_frequency_in_hz; + clock_period_in_ns = NSEC_PER_SEC / clock_frequency_in_hz; /* * The NFC quantizes setup and hold parameters in terms of clock cycles. @@ -698,17 +730,230 @@ return_results: hw->address_setup_in_cycles = address_setup_in_cycles; hw->use_half_periods = dll_use_half_periods; hw->sample_delay_factor = sample_delay_factor; + hw->device_busy_timeout = GPMI_DEFAULT_BUSY_TIMEOUT; + hw->wrn_dly_sel = BV_GPMI_CTRL1_WRN_DLY_SEL_4_TO_8NS; /* Return success. */ return 0; } +/* + * <1> Firstly, we should know what's the GPMI-clock means. + * The GPMI-clock is the internal clock in the gpmi nand controller. + * If you set 100MHz to gpmi nand controller, the GPMI-clock's period + * is 10ns. Mark the GPMI-clock's period as GPMI-clock-period. + * + * <2> Secondly, we should know what's the frequency on the nand chip pins. + * The frequency on the nand chip pins is derived from the GPMI-clock. + * We can get it from the following equation: + * + * F = G / (DS + DH) + * + * F : the frequency on the nand chip pins. + * G : the GPMI clock, such as 100MHz. + * DS : GPMI_HW_GPMI_TIMING0:DATA_SETUP + * DH : GPMI_HW_GPMI_TIMING0:DATA_HOLD + * + * <3> Thirdly, when the frequency on the nand chip pins is above 33MHz, + * the nand EDO(extended Data Out) timing could be applied. + * The GPMI implements a feedback read strobe to sample the read data. + * The feedback read strobe can be delayed to support the nand EDO timing + * where the read strobe may deasserts before the read data is valid, and + * read data is valid for some time after read strobe. + * + * The following figure illustrates some aspects of a NAND Flash read: + * + * |<---tREA---->| + * | | + * | | | + * |<--tRP-->| | + * | | | + * __ ___|__________________________________ + * RDN \________/ | + * | + * /---------\ + * Read Data --------------< >--------- + * \---------/ + * | | + * |<-D->| + * FeedbackRDN ________ ____________ + * \___________/ + * + * D stands for delay, set in the HW_GPMI_CTRL1:RDN_DELAY. + * + * + * <4> Now, we begin to describe how to compute the right RDN_DELAY. + * + * 4.1) From the aspect of the nand chip pins: + * Delay = (tREA + C - tRP) {1} + * + * tREA : the maximum read access time. From the ONFI nand standards, + * we know that tREA is 16ns in mode 5, tREA is 20ns is mode 4. + * Please check it in : www.onfi.org + * C : a constant for adjust the delay. default is 4. + * tRP : the read pulse width. + * Specified by the HW_GPMI_TIMING0:DATA_SETUP: + * tRP = (GPMI-clock-period) * DATA_SETUP + * + * 4.2) From the aspect of the GPMI nand controller: + * Delay = RDN_DELAY * 0.125 * RP {2} + * + * RP : the DLL reference period. + * if (GPMI-clock-period > DLL_THRETHOLD) + * RP = GPMI-clock-period / 2; + * else + * RP = GPMI-clock-period; + * + * Set the HW_GPMI_CTRL1:HALF_PERIOD if GPMI-clock-period + * is greater DLL_THRETHOLD. In other SOCs, the DLL_THRETHOLD + * is 16ns, but in mx6q, we use 12ns. + * + * 4.3) since {1} equals {2}, we get: + * + * (tREA + 4 - tRP) * 8 + * RDN_DELAY = --------------------- {3} + * RP + * + * 4.4) We only support the fastest asynchronous mode of ONFI nand. + * For some ONFI nand, the mode 4 is the fastest mode; + * while for some ONFI nand, the mode 5 is the fastest mode. + * So we only support the mode 4 and mode 5. It is no need to + * support other modes. + */ +static void gpmi_compute_edo_timing(struct gpmi_nand_data *this, + struct gpmi_nfc_hardware_timing *hw) +{ + struct resources *r = &this->resources; + unsigned long rate = clk_get_rate(r->clock[0]); + int mode = this->timing_mode; + int dll_threshold = 16; /* in ns */ + unsigned long delay; + unsigned long clk_period; + int t_rea; + int c = 4; + int t_rp; + int rp; + + /* + * [1] for GPMI_HW_GPMI_TIMING0: + * The async mode requires 40MHz for mode 4, 50MHz for mode 5. + * The GPMI can support 100MHz at most. So if we want to + * get the 40MHz or 50MHz, we have to set DS=1, DH=1. + * Set the ADDRESS_SETUP to 0 in mode 4. + */ + hw->data_setup_in_cycles = 1; + hw->data_hold_in_cycles = 1; + hw->address_setup_in_cycles = ((mode == 5) ? 1 : 0); + + /* [2] for GPMI_HW_GPMI_TIMING1 */ + hw->device_busy_timeout = 0x9000; + + /* [3] for GPMI_HW_GPMI_CTRL1 */ + hw->wrn_dly_sel = BV_GPMI_CTRL1_WRN_DLY_SEL_NO_DELAY; + + if (GPMI_IS_MX6Q(this)) + dll_threshold = 12; + + /* + * Enlarge 10 times for the numerator and denominator in {3}. + * This make us to get more accurate result. + */ + clk_period = NSEC_PER_SEC / (rate / 10); + dll_threshold *= 10; + t_rea = ((mode == 5) ? 16 : 20) * 10; + c *= 10; + + t_rp = clk_period * 1; /* DATA_SETUP is 1 */ + + if (clk_period > dll_threshold) { + hw->use_half_periods = 1; + rp = clk_period / 2; + } else { + hw->use_half_periods = 0; + rp = clk_period; + } + + /* + * Multiply the numerator with 10, we could do a round off: + * 7.8 round up to 8; 7.4 round down to 7. + */ + delay = (((t_rea + c - t_rp) * 8) * 10) / rp; + delay = (delay + 5) / 10; + + hw->sample_delay_factor = delay; +} + +static int enable_edo_mode(struct gpmi_nand_data *this, int mode) +{ + struct resources *r = &this->resources; + struct nand_chip *nand = &this->nand; + struct mtd_info *mtd = &this->mtd; + uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {}; + unsigned long rate; + int ret; + + nand->select_chip(mtd, 0); + + /* [1] send SET FEATURE commond to NAND */ + feature[0] = mode; + ret = nand->onfi_set_features(mtd, nand, + ONFI_FEATURE_ADDR_TIMING_MODE, feature); + if (ret) + goto err_out; + + /* [2] send GET FEATURE command to double-check the timing mode */ + memset(feature, 0, ONFI_SUBFEATURE_PARAM_LEN); + ret = nand->onfi_get_features(mtd, nand, + ONFI_FEATURE_ADDR_TIMING_MODE, feature); + if (ret || feature[0] != mode) + goto err_out; + + nand->select_chip(mtd, -1); + + /* [3] set the main IO clock, 100MHz for mode 5, 80MHz for mode 4. */ + rate = (mode == 5) ? 100000000 : 80000000; + clk_set_rate(r->clock[0], rate); + + /* Let the gpmi_begin() re-compute the timing again. */ + this->flags &= ~GPMI_TIMING_INIT_OK; + + this->flags |= GPMI_ASYNC_EDO_ENABLED; + this->timing_mode = mode; + dev_info(this->dev, "enable the asynchronous EDO mode %d\n", mode); + return 0; + +err_out: + nand->select_chip(mtd, -1); + dev_err(this->dev, "mode:%d ,failed in set feature.\n", mode); + return -EINVAL; +} + +int gpmi_extra_init(struct gpmi_nand_data *this) +{ + struct nand_chip *chip = &this->nand; + + /* Enable the asynchronous EDO feature. */ + if (GPMI_IS_MX6Q(this) && chip->onfi_version) { + int mode = onfi_get_async_timing_mode(chip); + + /* We only support the timing mode 4 and mode 5. */ + if (mode & ONFI_TIMING_MODE_5) + mode = 5; + else if (mode & ONFI_TIMING_MODE_4) + mode = 4; + else + return 0; + + return enable_edo_mode(this, mode); + } + return 0; +} + /* Begin the I/O */ void gpmi_begin(struct gpmi_nand_data *this) { struct resources *r = &this->resources; - struct timing_threshod *nfc = &timing_default_threshold; - unsigned char *gpmi_regs = r->gpmi_regs; + void __iomem *gpmi_regs = r->gpmi_regs; unsigned int clock_period_in_ns; uint32_t reg; unsigned int dll_wait_time_in_us; @@ -716,60 +961,66 @@ void gpmi_begin(struct gpmi_nand_data *this) int ret; /* Enable the clock. */ - ret = clk_prepare_enable(r->clock); + ret = gpmi_enable_clk(this); if (ret) { pr_err("We failed in enable the clk\n"); goto err_out; } - /* set ready/busy timeout */ - writel(0x500 << BP_GPMI_TIMING1_BUSY_TIMEOUT, - gpmi_regs + HW_GPMI_TIMING1); - - /* Get the timing information we need. */ - nfc->clock_frequency_in_hz = clk_get_rate(r->clock); - clock_period_in_ns = 1000000000 / nfc->clock_frequency_in_hz; + /* Only initialize the timing once */ + if (this->flags & GPMI_TIMING_INIT_OK) + return; + this->flags |= GPMI_TIMING_INIT_OK; - gpmi_nfc_compute_hardware_timing(this, &hw); + if (this->flags & GPMI_ASYNC_EDO_ENABLED) + gpmi_compute_edo_timing(this, &hw); + else + gpmi_nfc_compute_hardware_timing(this, &hw); - /* Set up all the simple timing parameters. */ + /* [1] Set HW_GPMI_TIMING0 */ reg = BF_GPMI_TIMING0_ADDRESS_SETUP(hw.address_setup_in_cycles) | BF_GPMI_TIMING0_DATA_HOLD(hw.data_hold_in_cycles) | BF_GPMI_TIMING0_DATA_SETUP(hw.data_setup_in_cycles) ; writel(reg, gpmi_regs + HW_GPMI_TIMING0); - /* - * DLL_ENABLE must be set to 0 when setting RDN_DELAY or HALF_PERIOD. - */ + /* [2] Set HW_GPMI_TIMING1 */ + writel(BF_GPMI_TIMING1_BUSY_TIMEOUT(hw.device_busy_timeout), + gpmi_regs + HW_GPMI_TIMING1); + + /* [3] The following code is to set the HW_GPMI_CTRL1. */ + + /* Set the WRN_DLY_SEL */ + writel(BM_GPMI_CTRL1_WRN_DLY_SEL, gpmi_regs + HW_GPMI_CTRL1_CLR); + writel(BF_GPMI_CTRL1_WRN_DLY_SEL(hw.wrn_dly_sel), + gpmi_regs + HW_GPMI_CTRL1_SET); + + /* DLL_ENABLE must be set to 0 when setting RDN_DELAY or HALF_PERIOD. */ writel(BM_GPMI_CTRL1_DLL_ENABLE, gpmi_regs + HW_GPMI_CTRL1_CLR); /* Clear out the DLL control fields. */ - writel(BM_GPMI_CTRL1_RDN_DELAY, gpmi_regs + HW_GPMI_CTRL1_CLR); - writel(BM_GPMI_CTRL1_HALF_PERIOD, gpmi_regs + HW_GPMI_CTRL1_CLR); + reg = BM_GPMI_CTRL1_RDN_DELAY | BM_GPMI_CTRL1_HALF_PERIOD; + writel(reg, gpmi_regs + HW_GPMI_CTRL1_CLR); /* If no sample delay is called for, return immediately. */ if (!hw.sample_delay_factor) return; - /* Configure the HALF_PERIOD flag. */ - if (hw.use_half_periods) - writel(BM_GPMI_CTRL1_HALF_PERIOD, - gpmi_regs + HW_GPMI_CTRL1_SET); + /* Set RDN_DELAY or HALF_PERIOD. */ + reg = ((hw.use_half_periods) ? BM_GPMI_CTRL1_HALF_PERIOD : 0) + | BF_GPMI_CTRL1_RDN_DELAY(hw.sample_delay_factor); - /* Set the delay factor. */ - writel(BF_GPMI_CTRL1_RDN_DELAY(hw.sample_delay_factor), - gpmi_regs + HW_GPMI_CTRL1_SET); + writel(reg, gpmi_regs + HW_GPMI_CTRL1_SET); - /* Enable the DLL. */ + /* At last, we enable the DLL. */ writel(BM_GPMI_CTRL1_DLL_ENABLE, gpmi_regs + HW_GPMI_CTRL1_SET); /* * After we enable the GPMI DLL, we have to wait 64 clock cycles before - * we can use the GPMI. - * - * Calculate the amount of time we need to wait, in microseconds. + * we can use the GPMI. Calculate the amount of time we need to wait, + * in microseconds. */ + clock_period_in_ns = NSEC_PER_SEC / clk_get_rate(r->clock[0]); dll_wait_time_in_us = (clock_period_in_ns * 64) / 1000; if (!dll_wait_time_in_us) @@ -784,8 +1035,7 @@ err_out: void gpmi_end(struct gpmi_nand_data *this) { - struct resources *r = &this->resources; - clk_disable_unprepare(r->clock); + gpmi_disable_clk(this); } /* Clears a BCH interrupt. */ diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c index a6cad5c..d79696b 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.c +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.c @@ -18,6 +18,9 @@ * with this program; if not, write to the Free Software Foundation, Inc., * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. */ + +#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt + #include <linux/clk.h> #include <linux/slab.h> #include <linux/interrupt.h> @@ -27,6 +30,7 @@ #include <linux/pinctrl/consumer.h> #include <linux/of.h> #include <linux/of_device.h> +#include <linux/of_mtd.h> #include "gpmi-nand.h" /* add our owner bbt descriptor */ @@ -113,7 +117,7 @@ int common_nfc_set_geometry(struct gpmi_nand_data *this) /* We use the same ECC strength for all chunks. */ geo->ecc_strength = get_ecc_strength(this); if (!geo->ecc_strength) { - pr_err("We get a wrong ECC strength.\n"); + pr_err("wrong ECC strength.\n"); return -EINVAL; } @@ -316,7 +320,7 @@ acquire_register_block(struct gpmi_nand_data *this, const char *res_name) struct platform_device *pdev = this->pdev; struct resources *res = &this->resources; struct resource *r; - void *p; + void __iomem *p; r = platform_get_resource_byname(pdev, IORESOURCE_MEM, res_name); if (!r) { @@ -423,8 +427,8 @@ static int __devinit acquire_dma_channels(struct gpmi_nand_data *this) struct platform_device *pdev = this->pdev; struct resource *r_dma; struct device_node *dn; - int dma_channel; - unsigned int ret; + u32 dma_channel; + int ret; struct dma_chan *dma_chan; dma_cap_mask_t mask; @@ -464,9 +468,73 @@ acquire_err: return -EINVAL; } +static void gpmi_put_clks(struct gpmi_nand_data *this) +{ + struct resources *r = &this->resources; + struct clk *clk; + int i; + + for (i = 0; i < GPMI_CLK_MAX; i++) { + clk = r->clock[i]; + if (clk) { + clk_put(clk); + r->clock[i] = NULL; + } + } +} + +static char *extra_clks_for_mx6q[GPMI_CLK_MAX] = { + "gpmi_apb", "gpmi_bch", "gpmi_bch_apb", "per1_bch", +}; + +static int __devinit gpmi_get_clks(struct gpmi_nand_data *this) +{ + struct resources *r = &this->resources; + char **extra_clks = NULL; + struct clk *clk; + int i; + + /* The main clock is stored in the first. */ + r->clock[0] = clk_get(this->dev, "gpmi_io"); + if (IS_ERR(r->clock[0])) + goto err_clock; + + /* Get extra clocks */ + if (GPMI_IS_MX6Q(this)) + extra_clks = extra_clks_for_mx6q; + if (!extra_clks) + return 0; + + for (i = 1; i < GPMI_CLK_MAX; i++) { + if (extra_clks[i - 1] == NULL) + break; + + clk = clk_get(this->dev, extra_clks[i - 1]); + if (IS_ERR(clk)) + goto err_clock; + + r->clock[i] = clk; + } + + if (GPMI_IS_MX6Q(this)) + /* + * Set the default value for the gpmi clock in mx6q: + * + * If you want to use the ONFI nand which is in the + * Synchronous Mode, you should change the clock as you need. + */ + clk_set_rate(r->clock[0], 22000000); + + return 0; + +err_clock: + dev_dbg(this->dev, "failed in finding the clocks.\n"); + gpmi_put_clks(this); + return -ENOMEM; +} + static int __devinit acquire_resources(struct gpmi_nand_data *this) { - struct resources *res = &this->resources; struct pinctrl *pinctrl; int ret; @@ -492,12 +560,9 @@ static int __devinit acquire_resources(struct gpmi_nand_data *this) goto exit_pin; } - res->clock = clk_get(&this->pdev->dev, NULL); - if (IS_ERR(res->clock)) { - pr_err("can not get the clock\n"); - ret = -ENOENT; + ret = gpmi_get_clks(this); + if (ret) goto exit_clock; - } return 0; exit_clock: @@ -512,9 +577,7 @@ exit_regs: static void release_resources(struct gpmi_nand_data *this) { - struct resources *r = &this->resources; - - clk_put(r->clock); + gpmi_put_clks(this); release_register_block(this); release_bch_irq(this); release_dma_channels(this); @@ -667,12 +730,12 @@ static int gpmi_alloc_dma_buffer(struct gpmi_nand_data *this) struct device *dev = this->dev; /* [1] Allocate a command buffer. PAGE_SIZE is enough. */ - this->cmd_buffer = kzalloc(PAGE_SIZE, GFP_DMA); + this->cmd_buffer = kzalloc(PAGE_SIZE, GFP_DMA | GFP_KERNEL); if (this->cmd_buffer == NULL) goto error_alloc; /* [2] Allocate a read/write data buffer. PAGE_SIZE is enough. */ - this->data_buffer_dma = kzalloc(PAGE_SIZE, GFP_DMA); + this->data_buffer_dma = kzalloc(PAGE_SIZE, GFP_DMA | GFP_KERNEL); if (this->data_buffer_dma == NULL) goto error_alloc; @@ -930,7 +993,7 @@ exit_nfc: return ret; } -static void gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip, +static int gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required) { struct gpmi_nand_data *this = chip->priv; @@ -972,7 +1035,7 @@ static void gpmi_ecc_write_page(struct mtd_info *mtd, struct nand_chip *chip, &payload_virt, &payload_phys); if (ret) { pr_err("Inadequate payload DMA buffer\n"); - return; + return 0; } ret = send_page_prepare(this, @@ -1002,6 +1065,8 @@ exit_auxiliary: nfc_geo->payload_size, payload_virt, payload_phys); } + + return 0; } /* @@ -1064,6 +1129,9 @@ exit_auxiliary: * ECC-based or raw view of the page is implicit in which function it calls * (there is a similar pair of ECC-based/raw functions for writing). * + * FIXME: The following paragraph is incorrect, now that there exist + * ecc.read_oob_raw and ecc.write_oob_raw functions. + * * Since MTD assumes the OOB is not covered by ECC, there is no pair of * ECC-based/raw functions for reading or or writing the OOB. The fact that the * caller wants an ECC-based or raw view of the page is not propagated down to @@ -1190,7 +1258,6 @@ static int mx23_check_transcription_stamp(struct gpmi_nand_data *this) unsigned int search_area_size_in_strides; unsigned int stride; unsigned int page; - loff_t byte; uint8_t *buffer = chip->buffers->databuf; int saved_chip_number; int found_an_ncb_fingerprint = false; @@ -1207,9 +1274,8 @@ static int mx23_check_transcription_stamp(struct gpmi_nand_data *this) dev_dbg(dev, "Scanning for an NCB fingerprint...\n"); for (stride = 0; stride < search_area_size_in_strides; stride++) { - /* Compute the page and byte addresses. */ + /* Compute the page addresses. */ page = stride * rom_geo->stride_size_in_pages; - byte = page * mtd->writesize; dev_dbg(dev, "Looking for a fingerprint in page 0x%x\n", page); @@ -1251,7 +1317,6 @@ static int mx23_write_transcription_stamp(struct gpmi_nand_data *this) unsigned int block; unsigned int stride; unsigned int page; - loff_t byte; uint8_t *buffer = chip->buffers->databuf; int saved_chip_number; int status; @@ -1300,9 +1365,8 @@ static int mx23_write_transcription_stamp(struct gpmi_nand_data *this) /* Loop through the first search area, writing NCB fingerprints. */ dev_dbg(dev, "Writing NCB fingerprints...\n"); for (stride = 0; stride < search_area_size_in_strides; stride++) { - /* Compute the page and byte addresses. */ + /* Compute the page addresses. */ page = stride * rom_geo->stride_size_in_pages; - byte = page * mtd->writesize; /* Write the first page of the current stride. */ dev_dbg(dev, "Writing an NCB fingerprint in page 0x%x\n", page); @@ -1436,6 +1500,7 @@ static int gpmi_pre_bbt_scan(struct gpmi_nand_data *this) /* Adjust the ECC strength according to the chip. */ this->nand.ecc.strength = this->bch_geometry.ecc_strength; this->mtd.ecc_strength = this->bch_geometry.ecc_strength; + this->mtd.bitflip_threshold = this->bch_geometry.ecc_strength; /* NAND boot init, depends on the gpmi_set_geometry(). */ return nand_boot_init(this); @@ -1452,11 +1517,19 @@ static int gpmi_scan_bbt(struct mtd_info *mtd) if (ret) return ret; + /* + * Can we enable the extra features? such as EDO or Sync mode. + * + * We do not check the return value now. That's means if we fail in + * enable the extra features, we still can run in the normal way. + */ + gpmi_extra_init(this); + /* use the default BBT implementation */ return nand_default_bbt(mtd); } -void gpmi_nfc_exit(struct gpmi_nand_data *this) +static void gpmi_nfc_exit(struct gpmi_nand_data *this) { nand_release(&this->mtd); gpmi_free_dma_buffer(this); @@ -1497,6 +1570,8 @@ static int __devinit gpmi_nfc_init(struct gpmi_nand_data *this) chip->ecc.size = 1; chip->ecc.strength = 8; chip->ecc.layout = &gpmi_hw_ecclayout; + if (of_get_nand_on_flash_bbt(this->dev->of_node)) + chip->bbt_options |= NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB; /* Allocate a temporary DMA buffer for reading ID in the nand_scan() */ this->bch_geometry.payload_size = 1024; @@ -1579,6 +1654,8 @@ static int __devinit gpmi_nand_probe(struct platform_device *pdev) if (ret) goto exit_nfc_init; + dev_info(this->dev, "driver registered.\n"); + return 0; exit_nfc_init: @@ -1586,10 +1663,12 @@ exit_nfc_init: exit_acquire_resources: platform_set_drvdata(pdev, NULL); kfree(this); + dev_err(this->dev, "driver registration failed: %d\n", ret); + return ret; } -static int __exit gpmi_nand_remove(struct platform_device *pdev) +static int __devexit gpmi_nand_remove(struct platform_device *pdev) { struct gpmi_nand_data *this = platform_get_drvdata(pdev); @@ -1606,29 +1685,10 @@ static struct platform_driver gpmi_nand_driver = { .of_match_table = gpmi_nand_id_table, }, .probe = gpmi_nand_probe, - .remove = __exit_p(gpmi_nand_remove), + .remove = __devexit_p(gpmi_nand_remove), .id_table = gpmi_ids, }; - -static int __init gpmi_nand_init(void) -{ - int err; - - err = platform_driver_register(&gpmi_nand_driver); - if (err == 0) - printk(KERN_INFO "GPMI NAND driver registered. (IMX)\n"); - else - pr_err("i.MX GPMI NAND driver registration failed\n"); - return err; -} - -static void __exit gpmi_nand_exit(void) -{ - platform_driver_unregister(&gpmi_nand_driver); -} - -module_init(gpmi_nand_init); -module_exit(gpmi_nand_exit); +module_platform_driver(gpmi_nand_driver); MODULE_AUTHOR("Freescale Semiconductor, Inc."); MODULE_DESCRIPTION("i.MX GPMI NAND Flash Controller Driver"); diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h index ce5daa1..7ac25c1 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-nand.h +++ b/drivers/mtd/nand/gpmi-nand/gpmi-nand.h @@ -22,14 +22,15 @@ #include <linux/dma-mapping.h> #include <linux/fsl/mxs-dma.h> +#define GPMI_CLK_MAX 5 /* MX6Q needs five clocks */ struct resources { - void *gpmi_regs; - void *bch_regs; + void __iomem *gpmi_regs; + void __iomem *bch_regs; unsigned int bch_low_interrupt; unsigned int bch_high_interrupt; unsigned int dma_low_channel; unsigned int dma_high_channel; - struct clk *clock; + struct clk *clock[GPMI_CLK_MAX]; }; /** @@ -121,6 +122,11 @@ struct nand_timing { }; struct gpmi_nand_data { + /* flags */ +#define GPMI_ASYNC_EDO_ENABLED (1 << 0) +#define GPMI_TIMING_INIT_OK (1 << 1) + int flags; + /* System Interface */ struct device *dev; struct platform_device *pdev; @@ -131,6 +137,7 @@ struct gpmi_nand_data { /* Flash Hardware */ struct nand_timing timing; + int timing_mode; /* BCH */ struct bch_geometry bch_geometry; @@ -188,16 +195,28 @@ struct gpmi_nand_data { * @data_setup_in_cycles: The data setup time, in cycles. * @data_hold_in_cycles: The data hold time, in cycles. * @address_setup_in_cycles: The address setup time, in cycles. + * @device_busy_timeout: The timeout waiting for NAND Ready/Busy, + * this value is the number of cycles multiplied + * by 4096. * @use_half_periods: Indicates the clock is running slowly, so the * NFC DLL should use half-periods. * @sample_delay_factor: The sample delay factor. + * @wrn_dly_sel: The delay on the GPMI write strobe. */ struct gpmi_nfc_hardware_timing { + /* for HW_GPMI_TIMING0 */ uint8_t data_setup_in_cycles; uint8_t data_hold_in_cycles; uint8_t address_setup_in_cycles; + + /* for HW_GPMI_TIMING1 */ + uint16_t device_busy_timeout; +#define GPMI_DEFAULT_BUSY_TIMEOUT 0x500 /* default busy timeout value.*/ + + /* for HW_GPMI_CTRL1 */ bool use_half_periods; uint8_t sample_delay_factor; + uint8_t wrn_dly_sel; }; /** @@ -246,6 +265,7 @@ extern int start_dma_with_bch_irq(struct gpmi_nand_data *, /* GPMI-NAND helper function library */ extern int gpmi_init(struct gpmi_nand_data *); +extern int gpmi_extra_init(struct gpmi_nand_data *); extern void gpmi_clear_bch(struct gpmi_nand_data *); extern void gpmi_dump_info(struct gpmi_nand_data *); extern int bch_set_geometry(struct gpmi_nand_data *); diff --git a/drivers/mtd/nand/gpmi-nand/gpmi-regs.h b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h index 8343124..53397cc 100644 --- a/drivers/mtd/nand/gpmi-nand/gpmi-regs.h +++ b/drivers/mtd/nand/gpmi-nand/gpmi-regs.h @@ -108,6 +108,15 @@ #define HW_GPMI_CTRL1_CLR 0x00000068 #define HW_GPMI_CTRL1_TOG 0x0000006c +#define BP_GPMI_CTRL1_WRN_DLY_SEL 22 +#define BM_GPMI_CTRL1_WRN_DLY_SEL (0x3 << BP_GPMI_CTRL1_WRN_DLY_SEL) +#define BF_GPMI_CTRL1_WRN_DLY_SEL(v) \ + (((v) << BP_GPMI_CTRL1_WRN_DLY_SEL) & BM_GPMI_CTRL1_WRN_DLY_SEL) +#define BV_GPMI_CTRL1_WRN_DLY_SEL_4_TO_8NS 0x0 +#define BV_GPMI_CTRL1_WRN_DLY_SEL_6_TO_10NS 0x1 +#define BV_GPMI_CTRL1_WRN_DLY_SEL_7_TO_12NS 0x2 +#define BV_GPMI_CTRL1_WRN_DLY_SEL_NO_DELAY 0x3 + #define BM_GPMI_CTRL1_BCH_MODE (1 << 18) #define BP_GPMI_CTRL1_DLL_ENABLE 17 @@ -154,6 +163,9 @@ #define HW_GPMI_TIMING1 0x00000080 #define BP_GPMI_TIMING1_BUSY_TIMEOUT 16 +#define BM_GPMI_TIMING1_BUSY_TIMEOUT (0xffff << BP_GPMI_TIMING1_BUSY_TIMEOUT) +#define BF_GPMI_TIMING1_BUSY_TIMEOUT(v) \ + (((v) << BP_GPMI_TIMING1_BUSY_TIMEOUT) & BM_GPMI_TIMING1_BUSY_TIMEOUT) #define HW_GPMI_TIMING2 0x00000090 #define HW_GPMI_DATA 0x000000a0 diff --git a/drivers/mtd/nand/lpc32xx_mlc.c b/drivers/mtd/nand/lpc32xx_mlc.c new file mode 100644 index 0000000..c29b7ac --- /dev/null +++ b/drivers/mtd/nand/lpc32xx_mlc.c @@ -0,0 +1,924 @@ +/* + * Driver for NAND MLC Controller in LPC32xx + * + * Author: Roland Stigge <stigge@antcom.de> + * + * Copyright © 2011 WORK Microwave GmbH + * Copyright © 2011, 2012 Roland Stigge + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * + * NAND Flash Controller Operation: + * - Read: Auto Decode + * - Write: Auto Encode + * - Tested Page Sizes: 2048, 4096 + */ + +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/completion.h> +#include <linux/interrupt.h> +#include <linux/of.h> +#include <linux/of_mtd.h> +#include <linux/of_gpio.h> +#include <linux/mtd/lpc32xx_mlc.h> +#include <linux/io.h> +#include <linux/mm.h> +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> +#include <linux/mtd/nand_ecc.h> + +#define DRV_NAME "lpc32xx_mlc" + +/********************************************************************** +* MLC NAND controller register offsets +**********************************************************************/ + +#define MLC_BUFF(x) (x + 0x00000) +#define MLC_DATA(x) (x + 0x08000) +#define MLC_CMD(x) (x + 0x10000) +#define MLC_ADDR(x) (x + 0x10004) +#define MLC_ECC_ENC_REG(x) (x + 0x10008) +#define MLC_ECC_DEC_REG(x) (x + 0x1000C) +#define MLC_ECC_AUTO_ENC_REG(x) (x + 0x10010) +#define MLC_ECC_AUTO_DEC_REG(x) (x + 0x10014) +#define MLC_RPR(x) (x + 0x10018) +#define MLC_WPR(x) (x + 0x1001C) +#define MLC_RUBP(x) (x + 0x10020) +#define MLC_ROBP(x) (x + 0x10024) +#define MLC_SW_WP_ADD_LOW(x) (x + 0x10028) +#define MLC_SW_WP_ADD_HIG(x) (x + 0x1002C) +#define MLC_ICR(x) (x + 0x10030) +#define MLC_TIME_REG(x) (x + 0x10034) +#define MLC_IRQ_MR(x) (x + 0x10038) +#define MLC_IRQ_SR(x) (x + 0x1003C) +#define MLC_LOCK_PR(x) (x + 0x10044) +#define MLC_ISR(x) (x + 0x10048) +#define MLC_CEH(x) (x + 0x1004C) + +/********************************************************************** +* MLC_CMD bit definitions +**********************************************************************/ +#define MLCCMD_RESET 0xFF + +/********************************************************************** +* MLC_ICR bit definitions +**********************************************************************/ +#define MLCICR_WPROT (1 << 3) +#define MLCICR_LARGEBLOCK (1 << 2) +#define MLCICR_LONGADDR (1 << 1) +#define MLCICR_16BIT (1 << 0) /* unsupported by LPC32x0! */ + +/********************************************************************** +* MLC_TIME_REG bit definitions +**********************************************************************/ +#define MLCTIMEREG_TCEA_DELAY(n) (((n) & 0x03) << 24) +#define MLCTIMEREG_BUSY_DELAY(n) (((n) & 0x1F) << 19) +#define MLCTIMEREG_NAND_TA(n) (((n) & 0x07) << 16) +#define MLCTIMEREG_RD_HIGH(n) (((n) & 0x0F) << 12) +#define MLCTIMEREG_RD_LOW(n) (((n) & 0x0F) << 8) +#define MLCTIMEREG_WR_HIGH(n) (((n) & 0x0F) << 4) +#define MLCTIMEREG_WR_LOW(n) (((n) & 0x0F) << 0) + +/********************************************************************** +* MLC_IRQ_MR and MLC_IRQ_SR bit definitions +**********************************************************************/ +#define MLCIRQ_NAND_READY (1 << 5) +#define MLCIRQ_CONTROLLER_READY (1 << 4) +#define MLCIRQ_DECODE_FAILURE (1 << 3) +#define MLCIRQ_DECODE_ERROR (1 << 2) +#define MLCIRQ_ECC_READY (1 << 1) +#define MLCIRQ_WRPROT_FAULT (1 << 0) + +/********************************************************************** +* MLC_LOCK_PR bit definitions +**********************************************************************/ +#define MLCLOCKPR_MAGIC 0xA25E + +/********************************************************************** +* MLC_ISR bit definitions +**********************************************************************/ +#define MLCISR_DECODER_FAILURE (1 << 6) +#define MLCISR_ERRORS ((1 << 4) | (1 << 5)) +#define MLCISR_ERRORS_DETECTED (1 << 3) +#define MLCISR_ECC_READY (1 << 2) +#define MLCISR_CONTROLLER_READY (1 << 1) +#define MLCISR_NAND_READY (1 << 0) + +/********************************************************************** +* MLC_CEH bit definitions +**********************************************************************/ +#define MLCCEH_NORMAL (1 << 0) + +struct lpc32xx_nand_cfg_mlc { + uint32_t tcea_delay; + uint32_t busy_delay; + uint32_t nand_ta; + uint32_t rd_high; + uint32_t rd_low; + uint32_t wr_high; + uint32_t wr_low; + int wp_gpio; + struct mtd_partition *parts; + unsigned num_parts; +}; + +static struct nand_ecclayout lpc32xx_nand_oob = { + .eccbytes = 40, + .eccpos = { 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, + 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, + 54, 55, 56, 57, 58, 59, 60, 61, 62, 63 }, + .oobfree = { + { .offset = 0, + .length = 6, }, + { .offset = 16, + .length = 6, }, + { .offset = 32, + .length = 6, }, + { .offset = 48, + .length = 6, }, + }, +}; + +static struct nand_bbt_descr lpc32xx_nand_bbt = { + .options = NAND_BBT_ABSPAGE | NAND_BBT_2BIT | NAND_BBT_NO_OOB | + NAND_BBT_WRITE, + .pages = { 524224, 0, 0, 0, 0, 0, 0, 0 }, +}; + +static struct nand_bbt_descr lpc32xx_nand_bbt_mirror = { + .options = NAND_BBT_ABSPAGE | NAND_BBT_2BIT | NAND_BBT_NO_OOB | + NAND_BBT_WRITE, + .pages = { 524160, 0, 0, 0, 0, 0, 0, 0 }, +}; + +struct lpc32xx_nand_host { + struct nand_chip nand_chip; + struct lpc32xx_mlc_platform_data *pdata; + struct clk *clk; + struct mtd_info mtd; + void __iomem *io_base; + int irq; + struct lpc32xx_nand_cfg_mlc *ncfg; + struct completion comp_nand; + struct completion comp_controller; + uint32_t llptr; + /* + * Physical addresses of ECC buffer, DMA data buffers, OOB data buffer + */ + dma_addr_t oob_buf_phy; + /* + * Virtual addresses of ECC buffer, DMA data buffers, OOB data buffer + */ + uint8_t *oob_buf; + /* Physical address of DMA base address */ + dma_addr_t io_base_phy; + + struct completion comp_dma; + struct dma_chan *dma_chan; + struct dma_slave_config dma_slave_config; + struct scatterlist sgl; + uint8_t *dma_buf; + uint8_t *dummy_buf; + int mlcsubpages; /* number of 512bytes-subpages */ +}; + +/* + * Activate/Deactivate DMA Operation: + * + * Using the PL080 DMA Controller for transferring the 512 byte subpages + * instead of doing readl() / writel() in a loop slows it down significantly. + * Measurements via getnstimeofday() upon 512 byte subpage reads reveal: + * + * - readl() of 128 x 32 bits in a loop: ~20us + * - DMA read of 512 bytes (32 bit, 4...128 words bursts): ~60us + * - DMA read of 512 bytes (32 bit, no bursts): ~100us + * + * This applies to the transfer itself. In the DMA case: only the + * wait_for_completion() (DMA setup _not_ included). + * + * Note that the 512 bytes subpage transfer is done directly from/to a + * FIFO/buffer inside the NAND controller. Most of the time (~400-800us for a + * 2048 bytes page) is spent waiting for the NAND IRQ, anyway. (The NAND + * controller transferring data between its internal buffer to/from the NAND + * chip.) + * + * Therefore, using the PL080 DMA is disabled by default, for now. + * + */ +static int use_dma; + +static void lpc32xx_nand_setup(struct lpc32xx_nand_host *host) +{ + uint32_t clkrate, tmp; + + /* Reset MLC controller */ + writel(MLCCMD_RESET, MLC_CMD(host->io_base)); + udelay(1000); + + /* Get base clock for MLC block */ + clkrate = clk_get_rate(host->clk); + if (clkrate == 0) + clkrate = 104000000; + + /* Unlock MLC_ICR + * (among others, will be locked again automatically) */ + writew(MLCLOCKPR_MAGIC, MLC_LOCK_PR(host->io_base)); + + /* Configure MLC Controller: Large Block, 5 Byte Address */ + tmp = MLCICR_LARGEBLOCK | MLCICR_LONGADDR; + writel(tmp, MLC_ICR(host->io_base)); + + /* Unlock MLC_TIME_REG + * (among others, will be locked again automatically) */ + writew(MLCLOCKPR_MAGIC, MLC_LOCK_PR(host->io_base)); + + /* Compute clock setup values, see LPC and NAND manual */ + tmp = 0; + tmp |= MLCTIMEREG_TCEA_DELAY(clkrate / host->ncfg->tcea_delay + 1); + tmp |= MLCTIMEREG_BUSY_DELAY(clkrate / host->ncfg->busy_delay + 1); + tmp |= MLCTIMEREG_NAND_TA(clkrate / host->ncfg->nand_ta + 1); + tmp |= MLCTIMEREG_RD_HIGH(clkrate / host->ncfg->rd_high + 1); + tmp |= MLCTIMEREG_RD_LOW(clkrate / host->ncfg->rd_low); + tmp |= MLCTIMEREG_WR_HIGH(clkrate / host->ncfg->wr_high + 1); + tmp |= MLCTIMEREG_WR_LOW(clkrate / host->ncfg->wr_low); + writel(tmp, MLC_TIME_REG(host->io_base)); + + /* Enable IRQ for CONTROLLER_READY and NAND_READY */ + writeb(MLCIRQ_CONTROLLER_READY | MLCIRQ_NAND_READY, + MLC_IRQ_MR(host->io_base)); + + /* Normal nCE operation: nCE controlled by controller */ + writel(MLCCEH_NORMAL, MLC_CEH(host->io_base)); +} + +/* + * Hardware specific access to control lines + */ +static void lpc32xx_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + struct nand_chip *nand_chip = mtd->priv; + struct lpc32xx_nand_host *host = nand_chip->priv; + + if (cmd != NAND_CMD_NONE) { + if (ctrl & NAND_CLE) + writel(cmd, MLC_CMD(host->io_base)); + else + writel(cmd, MLC_ADDR(host->io_base)); + } +} + +/* + * Read Device Ready (NAND device _and_ controller ready) + */ +static int lpc32xx_nand_device_ready(struct mtd_info *mtd) +{ + struct nand_chip *nand_chip = mtd->priv; + struct lpc32xx_nand_host *host = nand_chip->priv; + + if ((readb(MLC_ISR(host->io_base)) & + (MLCISR_CONTROLLER_READY | MLCISR_NAND_READY)) == + (MLCISR_CONTROLLER_READY | MLCISR_NAND_READY)) + return 1; + + return 0; +} + +static irqreturn_t lpc3xxx_nand_irq(int irq, struct lpc32xx_nand_host *host) +{ + uint8_t sr; + + /* Clear interrupt flag by reading status */ + sr = readb(MLC_IRQ_SR(host->io_base)); + if (sr & MLCIRQ_NAND_READY) + complete(&host->comp_nand); + if (sr & MLCIRQ_CONTROLLER_READY) + complete(&host->comp_controller); + + return IRQ_HANDLED; +} + +static int lpc32xx_waitfunc_nand(struct mtd_info *mtd, struct nand_chip *chip) +{ + struct lpc32xx_nand_host *host = chip->priv; + + if (readb(MLC_ISR(host->io_base)) & MLCISR_NAND_READY) + goto exit; + + wait_for_completion(&host->comp_nand); + + while (!(readb(MLC_ISR(host->io_base)) & MLCISR_NAND_READY)) { + /* Seems to be delayed sometimes by controller */ + dev_dbg(&mtd->dev, "Warning: NAND not ready.\n"); + cpu_relax(); + } + +exit: + return NAND_STATUS_READY; +} + +static int lpc32xx_waitfunc_controller(struct mtd_info *mtd, + struct nand_chip *chip) +{ + struct lpc32xx_nand_host *host = chip->priv; + + if (readb(MLC_ISR(host->io_base)) & MLCISR_CONTROLLER_READY) + goto exit; + + wait_for_completion(&host->comp_controller); + + while (!(readb(MLC_ISR(host->io_base)) & + MLCISR_CONTROLLER_READY)) { + dev_dbg(&mtd->dev, "Warning: Controller not ready.\n"); + cpu_relax(); + } + +exit: + return NAND_STATUS_READY; +} + +static int lpc32xx_waitfunc(struct mtd_info *mtd, struct nand_chip *chip) +{ + lpc32xx_waitfunc_nand(mtd, chip); + lpc32xx_waitfunc_controller(mtd, chip); + + return NAND_STATUS_READY; +} + +/* + * Enable NAND write protect + */ +static void lpc32xx_wp_enable(struct lpc32xx_nand_host *host) +{ + if (gpio_is_valid(host->ncfg->wp_gpio)) + gpio_set_value(host->ncfg->wp_gpio, 0); +} + +/* + * Disable NAND write protect + */ +static void lpc32xx_wp_disable(struct lpc32xx_nand_host *host) +{ + if (gpio_is_valid(host->ncfg->wp_gpio)) + gpio_set_value(host->ncfg->wp_gpio, 1); +} + +static void lpc32xx_dma_complete_func(void *completion) +{ + complete(completion); +} + +static int lpc32xx_xmit_dma(struct mtd_info *mtd, void *mem, int len, + enum dma_transfer_direction dir) +{ + struct nand_chip *chip = mtd->priv; + struct lpc32xx_nand_host *host = chip->priv; + struct dma_async_tx_descriptor *desc; + int flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT; + int res; + + sg_init_one(&host->sgl, mem, len); + + res = dma_map_sg(host->dma_chan->device->dev, &host->sgl, 1, + DMA_BIDIRECTIONAL); + if (res != 1) { + dev_err(mtd->dev.parent, "Failed to map sg list\n"); + return -ENXIO; + } + desc = dmaengine_prep_slave_sg(host->dma_chan, &host->sgl, 1, dir, + flags); + if (!desc) { + dev_err(mtd->dev.parent, "Failed to prepare slave sg\n"); + goto out1; + } + + init_completion(&host->comp_dma); + desc->callback = lpc32xx_dma_complete_func; + desc->callback_param = &host->comp_dma; + + dmaengine_submit(desc); + dma_async_issue_pending(host->dma_chan); + + wait_for_completion_timeout(&host->comp_dma, msecs_to_jiffies(1000)); + + dma_unmap_sg(host->dma_chan->device->dev, &host->sgl, 1, + DMA_BIDIRECTIONAL); + return 0; +out1: + dma_unmap_sg(host->dma_chan->device->dev, &host->sgl, 1, + DMA_BIDIRECTIONAL); + return -ENXIO; +} + +static int lpc32xx_read_page(struct mtd_info *mtd, struct nand_chip *chip, + uint8_t *buf, int oob_required, int page) +{ + struct lpc32xx_nand_host *host = chip->priv; + int i, j; + uint8_t *oobbuf = chip->oob_poi; + uint32_t mlc_isr; + int res; + uint8_t *dma_buf; + bool dma_mapped; + + if ((void *)buf <= high_memory) { + dma_buf = buf; + dma_mapped = true; + } else { + dma_buf = host->dma_buf; + dma_mapped = false; + } + + /* Writing Command and Address */ + chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); + + /* For all sub-pages */ + for (i = 0; i < host->mlcsubpages; i++) { + /* Start Auto Decode Command */ + writeb(0x00, MLC_ECC_AUTO_DEC_REG(host->io_base)); + + /* Wait for Controller Ready */ + lpc32xx_waitfunc_controller(mtd, chip); + + /* Check ECC Error status */ + mlc_isr = readl(MLC_ISR(host->io_base)); + if (mlc_isr & MLCISR_DECODER_FAILURE) { + mtd->ecc_stats.failed++; + dev_warn(&mtd->dev, "%s: DECODER_FAILURE\n", __func__); + } else if (mlc_isr & MLCISR_ERRORS_DETECTED) { + mtd->ecc_stats.corrected += ((mlc_isr >> 4) & 0x3) + 1; + } + + /* Read 512 + 16 Bytes */ + if (use_dma) { + res = lpc32xx_xmit_dma(mtd, dma_buf + i * 512, 512, + DMA_DEV_TO_MEM); + if (res) + return res; + } else { + for (j = 0; j < (512 >> 2); j++) { + *((uint32_t *)(buf)) = + readl(MLC_BUFF(host->io_base)); + buf += 4; + } + } + for (j = 0; j < (16 >> 2); j++) { + *((uint32_t *)(oobbuf)) = + readl(MLC_BUFF(host->io_base)); + oobbuf += 4; + } + } + + if (use_dma && !dma_mapped) + memcpy(buf, dma_buf, mtd->writesize); + + return 0; +} + +static int lpc32xx_write_page_lowlevel(struct mtd_info *mtd, + struct nand_chip *chip, + const uint8_t *buf, int oob_required) +{ + struct lpc32xx_nand_host *host = chip->priv; + const uint8_t *oobbuf = chip->oob_poi; + uint8_t *dma_buf = (uint8_t *)buf; + int res; + int i, j; + + if (use_dma && (void *)buf >= high_memory) { + dma_buf = host->dma_buf; + memcpy(dma_buf, buf, mtd->writesize); + } + + for (i = 0; i < host->mlcsubpages; i++) { + /* Start Encode */ + writeb(0x00, MLC_ECC_ENC_REG(host->io_base)); + + /* Write 512 + 6 Bytes to Buffer */ + if (use_dma) { + res = lpc32xx_xmit_dma(mtd, dma_buf + i * 512, 512, + DMA_MEM_TO_DEV); + if (res) + return res; + } else { + for (j = 0; j < (512 >> 2); j++) { + writel(*((uint32_t *)(buf)), + MLC_BUFF(host->io_base)); + buf += 4; + } + } + writel(*((uint32_t *)(oobbuf)), MLC_BUFF(host->io_base)); + oobbuf += 4; + writew(*((uint16_t *)(oobbuf)), MLC_BUFF(host->io_base)); + oobbuf += 12; + + /* Auto Encode w/ Bit 8 = 0 (see LPC MLC Controller manual) */ + writeb(0x00, MLC_ECC_AUTO_ENC_REG(host->io_base)); + + /* Wait for Controller Ready */ + lpc32xx_waitfunc_controller(mtd, chip); + } + return 0; +} + +static int lpc32xx_write_page(struct mtd_info *mtd, struct nand_chip *chip, + const uint8_t *buf, int oob_required, int page, + int cached, int raw) +{ + int res; + + chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); + res = lpc32xx_write_page_lowlevel(mtd, chip, buf, oob_required); + chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); + lpc32xx_waitfunc(mtd, chip); + + return res; +} + +static int lpc32xx_read_oob(struct mtd_info *mtd, struct nand_chip *chip, + int page) +{ + struct lpc32xx_nand_host *host = chip->priv; + + /* Read whole page - necessary with MLC controller! */ + lpc32xx_read_page(mtd, chip, host->dummy_buf, 1, page); + + return 0; +} + +static int lpc32xx_write_oob(struct mtd_info *mtd, struct nand_chip *chip, + int page) +{ + /* None, write_oob conflicts with the automatic LPC MLC ECC decoder! */ + return 0; +} + +/* Prepares MLC for transfers with H/W ECC enabled: always enabled anyway */ +static void lpc32xx_ecc_enable(struct mtd_info *mtd, int mode) +{ + /* Always enabled! */ +} + +static int lpc32xx_dma_setup(struct lpc32xx_nand_host *host) +{ + struct mtd_info *mtd = &host->mtd; + dma_cap_mask_t mask; + + if (!host->pdata || !host->pdata->dma_filter) { + dev_err(mtd->dev.parent, "no DMA platform data\n"); + return -ENOENT; + } + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + host->dma_chan = dma_request_channel(mask, host->pdata->dma_filter, + "nand-mlc"); + if (!host->dma_chan) { + dev_err(mtd->dev.parent, "Failed to request DMA channel\n"); + return -EBUSY; + } + + /* + * Set direction to a sensible value even if the dmaengine driver + * should ignore it. With the default (DMA_MEM_TO_MEM), the amba-pl08x + * driver criticizes it as "alien transfer direction". + */ + host->dma_slave_config.direction = DMA_DEV_TO_MEM; + host->dma_slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + host->dma_slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + host->dma_slave_config.src_maxburst = 128; + host->dma_slave_config.dst_maxburst = 128; + /* DMA controller does flow control: */ + host->dma_slave_config.device_fc = false; + host->dma_slave_config.src_addr = MLC_BUFF(host->io_base_phy); + host->dma_slave_config.dst_addr = MLC_BUFF(host->io_base_phy); + if (dmaengine_slave_config(host->dma_chan, &host->dma_slave_config)) { + dev_err(mtd->dev.parent, "Failed to setup DMA slave\n"); + goto out1; + } + + return 0; +out1: + dma_release_channel(host->dma_chan); + return -ENXIO; +} + +static struct lpc32xx_nand_cfg_mlc *lpc32xx_parse_dt(struct device *dev) +{ + struct lpc32xx_nand_cfg_mlc *ncfg; + struct device_node *np = dev->of_node; + + ncfg = devm_kzalloc(dev, sizeof(*ncfg), GFP_KERNEL); + if (!ncfg) { + dev_err(dev, "could not allocate memory for platform data\n"); + return NULL; + } + + of_property_read_u32(np, "nxp,tcea-delay", &ncfg->tcea_delay); + of_property_read_u32(np, "nxp,busy-delay", &ncfg->busy_delay); + of_property_read_u32(np, "nxp,nand-ta", &ncfg->nand_ta); + of_property_read_u32(np, "nxp,rd-high", &ncfg->rd_high); + of_property_read_u32(np, "nxp,rd-low", &ncfg->rd_low); + of_property_read_u32(np, "nxp,wr-high", &ncfg->wr_high); + of_property_read_u32(np, "nxp,wr-low", &ncfg->wr_low); + + if (!ncfg->tcea_delay || !ncfg->busy_delay || !ncfg->nand_ta || + !ncfg->rd_high || !ncfg->rd_low || !ncfg->wr_high || + !ncfg->wr_low) { + dev_err(dev, "chip parameters not specified correctly\n"); + return NULL; + } + + ncfg->wp_gpio = of_get_named_gpio(np, "gpios", 0); + + return ncfg; +} + +/* + * Probe for NAND controller + */ +static int __devinit lpc32xx_nand_probe(struct platform_device *pdev) +{ + struct lpc32xx_nand_host *host; + struct mtd_info *mtd; + struct nand_chip *nand_chip; + struct resource *rc; + int res; + struct mtd_part_parser_data ppdata = {}; + + /* Allocate memory for the device structure (and zero it) */ + host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL); + if (!host) { + dev_err(&pdev->dev, "failed to allocate device structure.\n"); + return -ENOMEM; + } + + rc = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (rc == NULL) { + dev_err(&pdev->dev, "No memory resource found for device!\r\n"); + return -ENXIO; + } + + host->io_base = devm_request_and_ioremap(&pdev->dev, rc); + if (host->io_base == NULL) { + dev_err(&pdev->dev, "ioremap failed\n"); + return -EIO; + } + host->io_base_phy = rc->start; + + mtd = &host->mtd; + nand_chip = &host->nand_chip; + if (pdev->dev.of_node) + host->ncfg = lpc32xx_parse_dt(&pdev->dev); + if (!host->ncfg) { + dev_err(&pdev->dev, + "Missing or bad NAND config from device tree\n"); + return -ENOENT; + } + if (host->ncfg->wp_gpio == -EPROBE_DEFER) + return -EPROBE_DEFER; + if (gpio_is_valid(host->ncfg->wp_gpio) && + gpio_request(host->ncfg->wp_gpio, "NAND WP")) { + dev_err(&pdev->dev, "GPIO not available\n"); + return -EBUSY; + } + lpc32xx_wp_disable(host); + + host->pdata = pdev->dev.platform_data; + + nand_chip->priv = host; /* link the private data structures */ + mtd->priv = nand_chip; + mtd->owner = THIS_MODULE; + mtd->dev.parent = &pdev->dev; + + /* Get NAND clock */ + host->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(host->clk)) { + dev_err(&pdev->dev, "Clock initialization failure\n"); + res = -ENOENT; + goto err_exit1; + } + clk_enable(host->clk); + + nand_chip->cmd_ctrl = lpc32xx_nand_cmd_ctrl; + nand_chip->dev_ready = lpc32xx_nand_device_ready; + nand_chip->chip_delay = 25; /* us */ + nand_chip->IO_ADDR_R = MLC_DATA(host->io_base); + nand_chip->IO_ADDR_W = MLC_DATA(host->io_base); + + /* Init NAND controller */ + lpc32xx_nand_setup(host); + + platform_set_drvdata(pdev, host); + + /* Initialize function pointers */ + nand_chip->ecc.hwctl = lpc32xx_ecc_enable; + nand_chip->ecc.read_page_raw = lpc32xx_read_page; + nand_chip->ecc.read_page = lpc32xx_read_page; + nand_chip->ecc.write_page_raw = lpc32xx_write_page_lowlevel; + nand_chip->ecc.write_page = lpc32xx_write_page_lowlevel; + nand_chip->ecc.write_oob = lpc32xx_write_oob; + nand_chip->ecc.read_oob = lpc32xx_read_oob; + nand_chip->ecc.strength = 4; + nand_chip->write_page = lpc32xx_write_page; + nand_chip->waitfunc = lpc32xx_waitfunc; + + nand_chip->bbt_options = NAND_BBT_USE_FLASH | NAND_BBT_NO_OOB; + nand_chip->bbt_td = &lpc32xx_nand_bbt; + nand_chip->bbt_md = &lpc32xx_nand_bbt_mirror; + + /* bitflip_threshold's default is defined as ecc_strength anyway. + * Unfortunately, it is set only later at add_mtd_device(). Meanwhile + * being 0, it causes bad block table scanning errors in + * nand_scan_tail(), so preparing it here. */ + mtd->bitflip_threshold = nand_chip->ecc.strength; + + if (use_dma) { + res = lpc32xx_dma_setup(host); + if (res) { + res = -EIO; + goto err_exit2; + } + } + + /* + * Scan to find existance of the device and + * Get the type of NAND device SMALL block or LARGE block + */ + if (nand_scan_ident(mtd, 1, NULL)) { + res = -ENXIO; + goto err_exit3; + } + + host->dma_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL); + if (!host->dma_buf) { + dev_err(&pdev->dev, "Error allocating dma_buf memory\n"); + res = -ENOMEM; + goto err_exit3; + } + + host->dummy_buf = devm_kzalloc(&pdev->dev, mtd->writesize, GFP_KERNEL); + if (!host->dummy_buf) { + dev_err(&pdev->dev, "Error allocating dummy_buf memory\n"); + res = -ENOMEM; + goto err_exit3; + } + + nand_chip->ecc.mode = NAND_ECC_HW; + nand_chip->ecc.size = mtd->writesize; + nand_chip->ecc.layout = &lpc32xx_nand_oob; + host->mlcsubpages = mtd->writesize / 512; + + /* initially clear interrupt status */ + readb(MLC_IRQ_SR(host->io_base)); + + init_completion(&host->comp_nand); + init_completion(&host->comp_controller); + + host->irq = platform_get_irq(pdev, 0); + if ((host->irq < 0) || (host->irq >= NR_IRQS)) { + dev_err(&pdev->dev, "failed to get platform irq\n"); + res = -EINVAL; + goto err_exit3; + } + + if (request_irq(host->irq, (irq_handler_t)&lpc3xxx_nand_irq, + IRQF_TRIGGER_HIGH, DRV_NAME, host)) { + dev_err(&pdev->dev, "Error requesting NAND IRQ\n"); + res = -ENXIO; + goto err_exit3; + } + + /* + * Fills out all the uninitialized function pointers with the defaults + * And scans for a bad block table if appropriate. + */ + if (nand_scan_tail(mtd)) { + res = -ENXIO; + goto err_exit4; + } + + mtd->name = DRV_NAME; + + ppdata.of_node = pdev->dev.of_node; + res = mtd_device_parse_register(mtd, NULL, &ppdata, host->ncfg->parts, + host->ncfg->num_parts); + if (!res) + return res; + + nand_release(mtd); + +err_exit4: + free_irq(host->irq, host); +err_exit3: + if (use_dma) + dma_release_channel(host->dma_chan); +err_exit2: + clk_disable(host->clk); + clk_put(host->clk); + platform_set_drvdata(pdev, NULL); +err_exit1: + lpc32xx_wp_enable(host); + gpio_free(host->ncfg->wp_gpio); + + return res; +} + +/* + * Remove NAND device + */ +static int __devexit lpc32xx_nand_remove(struct platform_device *pdev) +{ + struct lpc32xx_nand_host *host = platform_get_drvdata(pdev); + struct mtd_info *mtd = &host->mtd; + + nand_release(mtd); + free_irq(host->irq, host); + if (use_dma) + dma_release_channel(host->dma_chan); + + clk_disable(host->clk); + clk_put(host->clk); + platform_set_drvdata(pdev, NULL); + + lpc32xx_wp_enable(host); + gpio_free(host->ncfg->wp_gpio); + + return 0; +} + +#ifdef CONFIG_PM +static int lpc32xx_nand_resume(struct platform_device *pdev) +{ + struct lpc32xx_nand_host *host = platform_get_drvdata(pdev); + + /* Re-enable NAND clock */ + clk_enable(host->clk); + + /* Fresh init of NAND controller */ + lpc32xx_nand_setup(host); + + /* Disable write protect */ + lpc32xx_wp_disable(host); + + return 0; +} + +static int lpc32xx_nand_suspend(struct platform_device *pdev, pm_message_t pm) +{ + struct lpc32xx_nand_host *host = platform_get_drvdata(pdev); + + /* Enable write protect for safety */ + lpc32xx_wp_enable(host); + + /* Disable clock */ + clk_disable(host->clk); + return 0; +} + +#else +#define lpc32xx_nand_resume NULL +#define lpc32xx_nand_suspend NULL +#endif + +static const struct of_device_id lpc32xx_nand_match[] = { + { .compatible = "nxp,lpc3220-mlc" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, lpc32xx_nand_match); + +static struct platform_driver lpc32xx_nand_driver = { + .probe = lpc32xx_nand_probe, + .remove = __devexit_p(lpc32xx_nand_remove), + .resume = lpc32xx_nand_resume, + .suspend = lpc32xx_nand_suspend, + .driver = { + .name = DRV_NAME, + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(lpc32xx_nand_match), + }, +}; + +module_platform_driver(lpc32xx_nand_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>"); +MODULE_DESCRIPTION("NAND driver for the NXP LPC32XX MLC controller"); diff --git a/drivers/mtd/nand/lpc32xx_slc.c b/drivers/mtd/nand/lpc32xx_slc.c new file mode 100644 index 0000000..32409c4 --- /dev/null +++ b/drivers/mtd/nand/lpc32xx_slc.c @@ -0,0 +1,1039 @@ +/* + * NXP LPC32XX NAND SLC driver + * + * Authors: + * Kevin Wells <kevin.wells@nxp.com> + * Roland Stigge <stigge@antcom.de> + * + * Copyright © 2011 NXP Semiconductors + * Copyright © 2012 Roland Stigge + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/nand.h> +#include <linux/mtd/partitions.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/mm.h> +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> +#include <linux/mtd/nand_ecc.h> +#include <linux/gpio.h> +#include <linux/of.h> +#include <linux/of_mtd.h> +#include <linux/of_gpio.h> +#include <linux/mtd/lpc32xx_slc.h> + +#define LPC32XX_MODNAME "lpc32xx-nand" + +/********************************************************************** +* SLC NAND controller register offsets +**********************************************************************/ + +#define SLC_DATA(x) (x + 0x000) +#define SLC_ADDR(x) (x + 0x004) +#define SLC_CMD(x) (x + 0x008) +#define SLC_STOP(x) (x + 0x00C) +#define SLC_CTRL(x) (x + 0x010) +#define SLC_CFG(x) (x + 0x014) +#define SLC_STAT(x) (x + 0x018) +#define SLC_INT_STAT(x) (x + 0x01C) +#define SLC_IEN(x) (x + 0x020) +#define SLC_ISR(x) (x + 0x024) +#define SLC_ICR(x) (x + 0x028) +#define SLC_TAC(x) (x + 0x02C) +#define SLC_TC(x) (x + 0x030) +#define SLC_ECC(x) (x + 0x034) +#define SLC_DMA_DATA(x) (x + 0x038) + +/********************************************************************** +* slc_ctrl register definitions +**********************************************************************/ +#define SLCCTRL_SW_RESET (1 << 2) /* Reset the NAND controller bit */ +#define SLCCTRL_ECC_CLEAR (1 << 1) /* Reset ECC bit */ +#define SLCCTRL_DMA_START (1 << 0) /* Start DMA channel bit */ + +/********************************************************************** +* slc_cfg register definitions +**********************************************************************/ +#define SLCCFG_CE_LOW (1 << 5) /* Force CE low bit */ +#define SLCCFG_DMA_ECC (1 << 4) /* Enable DMA ECC bit */ +#define SLCCFG_ECC_EN (1 << 3) /* ECC enable bit */ +#define SLCCFG_DMA_BURST (1 << 2) /* DMA burst bit */ +#define SLCCFG_DMA_DIR (1 << 1) /* DMA write(0)/read(1) bit */ +#define SLCCFG_WIDTH (1 << 0) /* External device width, 0=8bit */ + +/********************************************************************** +* slc_stat register definitions +**********************************************************************/ +#define SLCSTAT_DMA_FIFO (1 << 2) /* DMA FIFO has data bit */ +#define SLCSTAT_SLC_FIFO (1 << 1) /* SLC FIFO has data bit */ +#define SLCSTAT_NAND_READY (1 << 0) /* NAND device is ready bit */ + +/********************************************************************** +* slc_int_stat, slc_ien, slc_isr, and slc_icr register definitions +**********************************************************************/ +#define SLCSTAT_INT_TC (1 << 1) /* Transfer count bit */ +#define SLCSTAT_INT_RDY_EN (1 << 0) /* Ready interrupt bit */ + +/********************************************************************** +* slc_tac register definitions +**********************************************************************/ +/* Clock setting for RDY write sample wait time in 2*n clocks */ +#define SLCTAC_WDR(n) (((n) & 0xF) << 28) +/* Write pulse width in clock cycles, 1 to 16 clocks */ +#define SLCTAC_WWIDTH(n) (((n) & 0xF) << 24) +/* Write hold time of control and data signals, 1 to 16 clocks */ +#define SLCTAC_WHOLD(n) (((n) & 0xF) << 20) +/* Write setup time of control and data signals, 1 to 16 clocks */ +#define SLCTAC_WSETUP(n) (((n) & 0xF) << 16) +/* Clock setting for RDY read sample wait time in 2*n clocks */ +#define SLCTAC_RDR(n) (((n) & 0xF) << 12) +/* Read pulse width in clock cycles, 1 to 16 clocks */ +#define SLCTAC_RWIDTH(n) (((n) & 0xF) << 8) +/* Read hold time of control and data signals, 1 to 16 clocks */ +#define SLCTAC_RHOLD(n) (((n) & 0xF) << 4) +/* Read setup time of control and data signals, 1 to 16 clocks */ +#define SLCTAC_RSETUP(n) (((n) & 0xF) << 0) + +/********************************************************************** +* slc_ecc register definitions +**********************************************************************/ +/* ECC line party fetch macro */ +#define SLCECC_TO_LINEPAR(n) (((n) >> 6) & 0x7FFF) +#define SLCECC_TO_COLPAR(n) ((n) & 0x3F) + +/* + * DMA requires storage space for the DMA local buffer and the hardware ECC + * storage area. The DMA local buffer is only used if DMA mapping fails + * during runtime. + */ +#define LPC32XX_DMA_DATA_SIZE 4096 +#define LPC32XX_ECC_SAVE_SIZE ((4096 / 256) * 4) + +/* Number of bytes used for ECC stored in NAND per 256 bytes */ +#define LPC32XX_SLC_DEV_ECC_BYTES 3 + +/* + * If the NAND base clock frequency can't be fetched, this frequency will be + * used instead as the base. This rate is used to setup the timing registers + * used for NAND accesses. + */ +#define LPC32XX_DEF_BUS_RATE 133250000 + +/* Milliseconds for DMA FIFO timeout (unlikely anyway) */ +#define LPC32XX_DMA_TIMEOUT 100 + +/* + * NAND ECC Layout for small page NAND devices + * Note: For large and huge page devices, the default layouts are used + */ +static struct nand_ecclayout lpc32xx_nand_oob_16 = { + .eccbytes = 6, + .eccpos = {10, 11, 12, 13, 14, 15}, + .oobfree = { + { .offset = 0, .length = 4 }, + { .offset = 6, .length = 4 }, + }, +}; + +static u8 bbt_pattern[] = {'B', 'b', 't', '0' }; +static u8 mirror_pattern[] = {'1', 't', 'b', 'B' }; + +/* + * Small page FLASH BBT descriptors, marker at offset 0, version at offset 6 + * Note: Large page devices used the default layout + */ +static struct nand_bbt_descr bbt_smallpage_main_descr = { + .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE + | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, + .offs = 0, + .len = 4, + .veroffs = 6, + .maxblocks = 4, + .pattern = bbt_pattern +}; + +static struct nand_bbt_descr bbt_smallpage_mirror_descr = { + .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE + | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP, + .offs = 0, + .len = 4, + .veroffs = 6, + .maxblocks = 4, + .pattern = mirror_pattern +}; + +/* + * NAND platform configuration structure + */ +struct lpc32xx_nand_cfg_slc { + uint32_t wdr_clks; + uint32_t wwidth; + uint32_t whold; + uint32_t wsetup; + uint32_t rdr_clks; + uint32_t rwidth; + uint32_t rhold; + uint32_t rsetup; + bool use_bbt; + int wp_gpio; + struct mtd_partition *parts; + unsigned num_parts; +}; + +struct lpc32xx_nand_host { + struct nand_chip nand_chip; + struct lpc32xx_slc_platform_data *pdata; + struct clk *clk; + struct mtd_info mtd; + void __iomem *io_base; + struct lpc32xx_nand_cfg_slc *ncfg; + + struct completion comp; + struct dma_chan *dma_chan; + uint32_t dma_buf_len; + struct dma_slave_config dma_slave_config; + struct scatterlist sgl; + + /* + * DMA and CPU addresses of ECC work area and data buffer + */ + uint32_t *ecc_buf; + uint8_t *data_buf; + dma_addr_t io_base_dma; +}; + +static void lpc32xx_nand_setup(struct lpc32xx_nand_host *host) +{ + uint32_t clkrate, tmp; + + /* Reset SLC controller */ + writel(SLCCTRL_SW_RESET, SLC_CTRL(host->io_base)); + udelay(1000); + + /* Basic setup */ + writel(0, SLC_CFG(host->io_base)); + writel(0, SLC_IEN(host->io_base)); + writel((SLCSTAT_INT_TC | SLCSTAT_INT_RDY_EN), + SLC_ICR(host->io_base)); + + /* Get base clock for SLC block */ + clkrate = clk_get_rate(host->clk); + if (clkrate == 0) + clkrate = LPC32XX_DEF_BUS_RATE; + + /* Compute clock setup values */ + tmp = SLCTAC_WDR(host->ncfg->wdr_clks) | + SLCTAC_WWIDTH(1 + (clkrate / host->ncfg->wwidth)) | + SLCTAC_WHOLD(1 + (clkrate / host->ncfg->whold)) | + SLCTAC_WSETUP(1 + (clkrate / host->ncfg->wsetup)) | + SLCTAC_RDR(host->ncfg->rdr_clks) | + SLCTAC_RWIDTH(1 + (clkrate / host->ncfg->rwidth)) | + SLCTAC_RHOLD(1 + (clkrate / host->ncfg->rhold)) | + SLCTAC_RSETUP(1 + (clkrate / host->ncfg->rsetup)); + writel(tmp, SLC_TAC(host->io_base)); +} + +/* + * Hardware specific access to control lines + */ +static void lpc32xx_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, + unsigned int ctrl) +{ + uint32_t tmp; + struct nand_chip *chip = mtd->priv; + struct lpc32xx_nand_host *host = chip->priv; + + /* Does CE state need to be changed? */ + tmp = readl(SLC_CFG(host->io_base)); + if (ctrl & NAND_NCE) + tmp |= SLCCFG_CE_LOW; + else + tmp &= ~SLCCFG_CE_LOW; + writel(tmp, SLC_CFG(host->io_base)); + + if (cmd != NAND_CMD_NONE) { + if (ctrl & NAND_CLE) + writel(cmd, SLC_CMD(host->io_base)); + else + writel(cmd, SLC_ADDR(host->io_base)); + } +} + +/* + * Read the Device Ready pin + */ +static int lpc32xx_nand_device_ready(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd->priv; + struct lpc32xx_nand_host *host = chip->priv; + int rdy = 0; + + if ((readl(SLC_STAT(host->io_base)) & SLCSTAT_NAND_READY) != 0) + rdy = 1; + + return rdy; +} + +/* + * Enable NAND write protect + */ +static void lpc32xx_wp_enable(struct lpc32xx_nand_host *host) +{ + if (gpio_is_valid(host->ncfg->wp_gpio)) + gpio_set_value(host->ncfg->wp_gpio, 0); +} + +/* + * Disable NAND write protect + */ +static void lpc32xx_wp_disable(struct lpc32xx_nand_host *host) +{ + if (gpio_is_valid(host->ncfg->wp_gpio)) + gpio_set_value(host->ncfg->wp_gpio, 1); +} + +/* + * Prepares SLC for transfers with H/W ECC enabled + */ +static void lpc32xx_nand_ecc_enable(struct mtd_info *mtd, int mode) +{ + /* Hardware ECC is enabled automatically in hardware as needed */ +} + +/* + * Calculates the ECC for the data + */ +static int lpc32xx_nand_ecc_calculate(struct mtd_info *mtd, + const unsigned char *buf, + unsigned char *code) +{ + /* + * ECC is calculated automatically in hardware during syndrome read + * and write operations, so it doesn't need to be calculated here. + */ + return 0; +} + +/* + * Read a single byte from NAND device + */ +static uint8_t lpc32xx_nand_read_byte(struct mtd_info *mtd) +{ + struct nand_chip *chip = mtd->priv; + struct lpc32xx_nand_host *host = chip->priv; + + return (uint8_t)readl(SLC_DATA(host->io_base)); +} + +/* + * Simple device read without ECC + */ +static void lpc32xx_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) +{ + struct nand_chip *chip = mtd->priv; + struct lpc32xx_nand_host *host = chip->priv; + + /* Direct device read with no ECC */ + while (len-- > 0) + *buf++ = (uint8_t)readl(SLC_DATA(host->io_base)); +} + +/* + * Simple device write without ECC + */ +static void lpc32xx_nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) +{ + struct nand_chip *chip = mtd->priv; + struct lpc32xx_nand_host *host = chip->priv; + + /* Direct device write with no ECC */ + while (len-- > 0) + writel((uint32_t)*buf++, SLC_DATA(host->io_base)); +} + +/* + * Read the OOB data from the device without ECC using FIFO method + */ +static int lpc32xx_nand_read_oob_syndrome(struct mtd_info *mtd, + struct nand_chip *chip, int page) +{ + chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page); + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); + + return 0; +} + +/* + * Write the OOB data to the device without ECC using FIFO method + */ +static int lpc32xx_nand_write_oob_syndrome(struct mtd_info *mtd, + struct nand_chip *chip, int page) +{ + int status; + + chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page); + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); + + /* Send command to program the OOB data */ + chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1); + + status = chip->waitfunc(mtd, chip); + + return status & NAND_STATUS_FAIL ? -EIO : 0; +} + +/* + * Fills in the ECC fields in the OOB buffer with the hardware generated ECC + */ +static void lpc32xx_slc_ecc_copy(uint8_t *spare, const uint32_t *ecc, int count) +{ + int i; + + for (i = 0; i < (count * 3); i += 3) { + uint32_t ce = ecc[i / 3]; + ce = ~(ce << 2) & 0xFFFFFF; + spare[i + 2] = (uint8_t)(ce & 0xFF); + ce >>= 8; + spare[i + 1] = (uint8_t)(ce & 0xFF); + ce >>= 8; + spare[i] = (uint8_t)(ce & 0xFF); + } +} + +static void lpc32xx_dma_complete_func(void *completion) +{ + complete(completion); +} + +static int lpc32xx_xmit_dma(struct mtd_info *mtd, dma_addr_t dma, + void *mem, int len, enum dma_transfer_direction dir) +{ + struct nand_chip *chip = mtd->priv; + struct lpc32xx_nand_host *host = chip->priv; + struct dma_async_tx_descriptor *desc; + int flags = DMA_CTRL_ACK | DMA_PREP_INTERRUPT; + int res; + + host->dma_slave_config.direction = dir; + host->dma_slave_config.src_addr = dma; + host->dma_slave_config.dst_addr = dma; + host->dma_slave_config.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + host->dma_slave_config.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES; + host->dma_slave_config.src_maxburst = 4; + host->dma_slave_config.dst_maxburst = 4; + /* DMA controller does flow control: */ + host->dma_slave_config.device_fc = false; + if (dmaengine_slave_config(host->dma_chan, &host->dma_slave_config)) { + dev_err(mtd->dev.parent, "Failed to setup DMA slave\n"); + return -ENXIO; + } + + sg_init_one(&host->sgl, mem, len); + + res = dma_map_sg(host->dma_chan->device->dev, &host->sgl, 1, + DMA_BIDIRECTIONAL); + if (res != 1) { + dev_err(mtd->dev.parent, "Failed to map sg list\n"); + return -ENXIO; + } + desc = dmaengine_prep_slave_sg(host->dma_chan, &host->sgl, 1, dir, + flags); + if (!desc) { + dev_err(mtd->dev.parent, "Failed to prepare slave sg\n"); + goto out1; + } + + init_completion(&host->comp); + desc->callback = lpc32xx_dma_complete_func; + desc->callback_param = &host->comp; + + dmaengine_submit(desc); + dma_async_issue_pending(host->dma_chan); + + wait_for_completion_timeout(&host->comp, msecs_to_jiffies(1000)); + + dma_unmap_sg(host->dma_chan->device->dev, &host->sgl, 1, + DMA_BIDIRECTIONAL); + + return 0; +out1: + dma_unmap_sg(host->dma_chan->device->dev, &host->sgl, 1, + DMA_BIDIRECTIONAL); + return -ENXIO; +} + +/* + * DMA read/write transfers with ECC support + */ +static int lpc32xx_xfer(struct mtd_info *mtd, uint8_t *buf, int eccsubpages, + int read) +{ + struct nand_chip *chip = mtd->priv; + struct lpc32xx_nand_host *host = chip->priv; + int i, status = 0; + unsigned long timeout; + int res; + enum dma_transfer_direction dir = + read ? DMA_DEV_TO_MEM : DMA_MEM_TO_DEV; + uint8_t *dma_buf; + bool dma_mapped; + + if ((void *)buf <= high_memory) { + dma_buf = buf; + dma_mapped = true; + } else { + dma_buf = host->data_buf; + dma_mapped = false; + if (!read) + memcpy(host->data_buf, buf, mtd->writesize); + } + + if (read) { + writel(readl(SLC_CFG(host->io_base)) | + SLCCFG_DMA_DIR | SLCCFG_ECC_EN | SLCCFG_DMA_ECC | + SLCCFG_DMA_BURST, SLC_CFG(host->io_base)); + } else { + writel((readl(SLC_CFG(host->io_base)) | + SLCCFG_ECC_EN | SLCCFG_DMA_ECC | SLCCFG_DMA_BURST) & + ~SLCCFG_DMA_DIR, + SLC_CFG(host->io_base)); + } + + /* Clear initial ECC */ + writel(SLCCTRL_ECC_CLEAR, SLC_CTRL(host->io_base)); + + /* Transfer size is data area only */ + writel(mtd->writesize, SLC_TC(host->io_base)); + + /* Start transfer in the NAND controller */ + writel(readl(SLC_CTRL(host->io_base)) | SLCCTRL_DMA_START, + SLC_CTRL(host->io_base)); + + for (i = 0; i < chip->ecc.steps; i++) { + /* Data */ + res = lpc32xx_xmit_dma(mtd, SLC_DMA_DATA(host->io_base_dma), + dma_buf + i * chip->ecc.size, + mtd->writesize / chip->ecc.steps, dir); + if (res) + return res; + + /* Always _read_ ECC */ + if (i == chip->ecc.steps - 1) + break; + if (!read) /* ECC availability delayed on write */ + udelay(10); + res = lpc32xx_xmit_dma(mtd, SLC_ECC(host->io_base_dma), + &host->ecc_buf[i], 4, DMA_DEV_TO_MEM); + if (res) + return res; + } + + /* + * According to NXP, the DMA can be finished here, but the NAND + * controller may still have buffered data. After porting to using the + * dmaengine DMA driver (amba-pl080), the condition (DMA_FIFO empty) + * appears to be always true, according to tests. Keeping the check for + * safety reasons for now. + */ + if (readl(SLC_STAT(host->io_base)) & SLCSTAT_DMA_FIFO) { + dev_warn(mtd->dev.parent, "FIFO not empty!\n"); + timeout = jiffies + msecs_to_jiffies(LPC32XX_DMA_TIMEOUT); + while ((readl(SLC_STAT(host->io_base)) & SLCSTAT_DMA_FIFO) && + time_before(jiffies, timeout)) + cpu_relax(); + if (!time_before(jiffies, timeout)) { + dev_err(mtd->dev.parent, "FIFO held data too long\n"); + status = -EIO; + } + } + + /* Read last calculated ECC value */ + if (!read) + udelay(10); + host->ecc_buf[chip->ecc.steps - 1] = + readl(SLC_ECC(host->io_base)); + + /* Flush DMA */ + dmaengine_terminate_all(host->dma_chan); + + if (readl(SLC_STAT(host->io_base)) & SLCSTAT_DMA_FIFO || + readl(SLC_TC(host->io_base))) { + /* Something is left in the FIFO, something is wrong */ + dev_err(mtd->dev.parent, "DMA FIFO failure\n"); + status = -EIO; + } + + /* Stop DMA & HW ECC */ + writel(readl(SLC_CTRL(host->io_base)) & ~SLCCTRL_DMA_START, + SLC_CTRL(host->io_base)); + writel(readl(SLC_CFG(host->io_base)) & + ~(SLCCFG_DMA_DIR | SLCCFG_ECC_EN | SLCCFG_DMA_ECC | + SLCCFG_DMA_BURST), SLC_CFG(host->io_base)); + + if (!dma_mapped && read) + memcpy(buf, host->data_buf, mtd->writesize); + + return status; +} + +/* + * Read the data and OOB data from the device, use ECC correction with the + * data, disable ECC for the OOB data + */ +static int lpc32xx_nand_read_page_syndrome(struct mtd_info *mtd, + struct nand_chip *chip, uint8_t *buf, + int oob_required, int page) +{ + struct lpc32xx_nand_host *host = chip->priv; + int stat, i, status; + uint8_t *oobecc, tmpecc[LPC32XX_ECC_SAVE_SIZE]; + + /* Issue read command */ + chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); + + /* Read data and oob, calculate ECC */ + status = lpc32xx_xfer(mtd, buf, chip->ecc.steps, 1); + + /* Get OOB data */ + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); + + /* Convert to stored ECC format */ + lpc32xx_slc_ecc_copy(tmpecc, (uint32_t *) host->ecc_buf, chip->ecc.steps); + + /* Pointer to ECC data retrieved from NAND spare area */ + oobecc = chip->oob_poi + chip->ecc.layout->eccpos[0]; + + for (i = 0; i < chip->ecc.steps; i++) { + stat = chip->ecc.correct(mtd, buf, oobecc, + &tmpecc[i * chip->ecc.bytes]); + if (stat < 0) + mtd->ecc_stats.failed++; + else + mtd->ecc_stats.corrected += stat; + + buf += chip->ecc.size; + oobecc += chip->ecc.bytes; + } + + return status; +} + +/* + * Read the data and OOB data from the device, no ECC correction with the + * data or OOB data + */ +static int lpc32xx_nand_read_page_raw_syndrome(struct mtd_info *mtd, + struct nand_chip *chip, + uint8_t *buf, int oob_required, + int page) +{ + /* Issue read command */ + chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); + + /* Raw reads can just use the FIFO interface */ + chip->read_buf(mtd, buf, chip->ecc.size * chip->ecc.steps); + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); + + return 0; +} + +/* + * Write the data and OOB data to the device, use ECC with the data, + * disable ECC for the OOB data + */ +static int lpc32xx_nand_write_page_syndrome(struct mtd_info *mtd, + struct nand_chip *chip, + const uint8_t *buf, int oob_required) +{ + struct lpc32xx_nand_host *host = chip->priv; + uint8_t *pb = chip->oob_poi + chip->ecc.layout->eccpos[0]; + int error; + + /* Write data, calculate ECC on outbound data */ + error = lpc32xx_xfer(mtd, (uint8_t *)buf, chip->ecc.steps, 0); + if (error) + return error; + + /* + * The calculated ECC needs some manual work done to it before + * committing it to NAND. Process the calculated ECC and place + * the resultant values directly into the OOB buffer. */ + lpc32xx_slc_ecc_copy(pb, (uint32_t *)host->ecc_buf, chip->ecc.steps); + + /* Write ECC data to device */ + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); + return 0; +} + +/* + * Write the data and OOB data to the device, no ECC correction with the + * data or OOB data + */ +static int lpc32xx_nand_write_page_raw_syndrome(struct mtd_info *mtd, + struct nand_chip *chip, + const uint8_t *buf, + int oob_required) +{ + /* Raw writes can just use the FIFO interface */ + chip->write_buf(mtd, buf, chip->ecc.size * chip->ecc.steps); + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); + return 0; +} + +static int lpc32xx_nand_dma_setup(struct lpc32xx_nand_host *host) +{ + struct mtd_info *mtd = &host->mtd; + dma_cap_mask_t mask; + + if (!host->pdata || !host->pdata->dma_filter) { + dev_err(mtd->dev.parent, "no DMA platform data\n"); + return -ENOENT; + } + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + host->dma_chan = dma_request_channel(mask, host->pdata->dma_filter, + "nand-slc"); + if (!host->dma_chan) { + dev_err(mtd->dev.parent, "Failed to request DMA channel\n"); + return -EBUSY; + } + + return 0; +} + +static struct lpc32xx_nand_cfg_slc *lpc32xx_parse_dt(struct device *dev) +{ + struct lpc32xx_nand_cfg_slc *ncfg; + struct device_node *np = dev->of_node; + + ncfg = devm_kzalloc(dev, sizeof(*ncfg), GFP_KERNEL); + if (!ncfg) { + dev_err(dev, "could not allocate memory for NAND config\n"); + return NULL; + } + + of_property_read_u32(np, "nxp,wdr-clks", &ncfg->wdr_clks); + of_property_read_u32(np, "nxp,wwidth", &ncfg->wwidth); + of_property_read_u32(np, "nxp,whold", &ncfg->whold); + of_property_read_u32(np, "nxp,wsetup", &ncfg->wsetup); + of_property_read_u32(np, "nxp,rdr-clks", &ncfg->rdr_clks); + of_property_read_u32(np, "nxp,rwidth", &ncfg->rwidth); + of_property_read_u32(np, "nxp,rhold", &ncfg->rhold); + of_property_read_u32(np, "nxp,rsetup", &ncfg->rsetup); + + if (!ncfg->wdr_clks || !ncfg->wwidth || !ncfg->whold || + !ncfg->wsetup || !ncfg->rdr_clks || !ncfg->rwidth || + !ncfg->rhold || !ncfg->rsetup) { + dev_err(dev, "chip parameters not specified correctly\n"); + return NULL; + } + + ncfg->use_bbt = of_get_nand_on_flash_bbt(np); + ncfg->wp_gpio = of_get_named_gpio(np, "gpios", 0); + + return ncfg; +} + +/* + * Probe for NAND controller + */ +static int __devinit lpc32xx_nand_probe(struct platform_device *pdev) +{ + struct lpc32xx_nand_host *host; + struct mtd_info *mtd; + struct nand_chip *chip; + struct resource *rc; + struct mtd_part_parser_data ppdata = {}; + int res; + + rc = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (rc == NULL) { + dev_err(&pdev->dev, "No memory resource found for device\n"); + return -EBUSY; + } + + /* Allocate memory for the device structure (and zero it) */ + host = devm_kzalloc(&pdev->dev, sizeof(*host), GFP_KERNEL); + if (!host) { + dev_err(&pdev->dev, "failed to allocate device structure\n"); + return -ENOMEM; + } + host->io_base_dma = rc->start; + + host->io_base = devm_request_and_ioremap(&pdev->dev, rc); + if (host->io_base == NULL) { + dev_err(&pdev->dev, "ioremap failed\n"); + return -ENOMEM; + } + + if (pdev->dev.of_node) + host->ncfg = lpc32xx_parse_dt(&pdev->dev); + if (!host->ncfg) { + dev_err(&pdev->dev, + "Missing or bad NAND config from device tree\n"); + return -ENOENT; + } + if (host->ncfg->wp_gpio == -EPROBE_DEFER) + return -EPROBE_DEFER; + if (gpio_is_valid(host->ncfg->wp_gpio) && + gpio_request(host->ncfg->wp_gpio, "NAND WP")) { + dev_err(&pdev->dev, "GPIO not available\n"); + return -EBUSY; + } + lpc32xx_wp_disable(host); + + host->pdata = pdev->dev.platform_data; + + mtd = &host->mtd; + chip = &host->nand_chip; + chip->priv = host; + mtd->priv = chip; + mtd->owner = THIS_MODULE; + mtd->dev.parent = &pdev->dev; + + /* Get NAND clock */ + host->clk = clk_get(&pdev->dev, NULL); + if (IS_ERR(host->clk)) { + dev_err(&pdev->dev, "Clock failure\n"); + res = -ENOENT; + goto err_exit1; + } + clk_enable(host->clk); + + /* Set NAND IO addresses and command/ready functions */ + chip->IO_ADDR_R = SLC_DATA(host->io_base); + chip->IO_ADDR_W = SLC_DATA(host->io_base); + chip->cmd_ctrl = lpc32xx_nand_cmd_ctrl; + chip->dev_ready = lpc32xx_nand_device_ready; + chip->chip_delay = 20; /* 20us command delay time */ + + /* Init NAND controller */ + lpc32xx_nand_setup(host); + + platform_set_drvdata(pdev, host); + + /* NAND callbacks for LPC32xx SLC hardware */ + chip->ecc.mode = NAND_ECC_HW_SYNDROME; + chip->read_byte = lpc32xx_nand_read_byte; + chip->read_buf = lpc32xx_nand_read_buf; + chip->write_buf = lpc32xx_nand_write_buf; + chip->ecc.read_page_raw = lpc32xx_nand_read_page_raw_syndrome; + chip->ecc.read_page = lpc32xx_nand_read_page_syndrome; + chip->ecc.write_page_raw = lpc32xx_nand_write_page_raw_syndrome; + chip->ecc.write_page = lpc32xx_nand_write_page_syndrome; + chip->ecc.write_oob = lpc32xx_nand_write_oob_syndrome; + chip->ecc.read_oob = lpc32xx_nand_read_oob_syndrome; + chip->ecc.calculate = lpc32xx_nand_ecc_calculate; + chip->ecc.correct = nand_correct_data; + chip->ecc.strength = 1; + chip->ecc.hwctl = lpc32xx_nand_ecc_enable; + + /* bitflip_threshold's default is defined as ecc_strength anyway. + * Unfortunately, it is set only later at add_mtd_device(). Meanwhile + * being 0, it causes bad block table scanning errors in + * nand_scan_tail(), so preparing it here already. */ + mtd->bitflip_threshold = chip->ecc.strength; + + /* + * Allocate a large enough buffer for a single huge page plus + * extra space for the spare area and ECC storage area + */ + host->dma_buf_len = LPC32XX_DMA_DATA_SIZE + LPC32XX_ECC_SAVE_SIZE; + host->data_buf = devm_kzalloc(&pdev->dev, host->dma_buf_len, + GFP_KERNEL); + if (host->data_buf == NULL) { + dev_err(&pdev->dev, "Error allocating memory\n"); + res = -ENOMEM; + goto err_exit2; + } + + res = lpc32xx_nand_dma_setup(host); + if (res) { + res = -EIO; + goto err_exit2; + } + + /* Find NAND device */ + if (nand_scan_ident(mtd, 1, NULL)) { + res = -ENXIO; + goto err_exit3; + } + + /* OOB and ECC CPU and DMA work areas */ + host->ecc_buf = (uint32_t *)(host->data_buf + LPC32XX_DMA_DATA_SIZE); + + /* + * Small page FLASH has a unique OOB layout, but large and huge + * page FLASH use the standard layout. Small page FLASH uses a + * custom BBT marker layout. + */ + if (mtd->writesize <= 512) + chip->ecc.layout = &lpc32xx_nand_oob_16; + + /* These sizes remain the same regardless of page size */ + chip->ecc.size = 256; + chip->ecc.bytes = LPC32XX_SLC_DEV_ECC_BYTES; + chip->ecc.prepad = chip->ecc.postpad = 0; + + /* Avoid extra scan if using BBT, setup BBT support */ + if (host->ncfg->use_bbt) { + chip->options |= NAND_SKIP_BBTSCAN; + chip->bbt_options |= NAND_BBT_USE_FLASH; + + /* + * Use a custom BBT marker setup for small page FLASH that + * won't interfere with the ECC layout. Large and huge page + * FLASH use the standard layout. + */ + if (mtd->writesize <= 512) { + chip->bbt_td = &bbt_smallpage_main_descr; + chip->bbt_md = &bbt_smallpage_mirror_descr; + } + } + + /* + * Fills out all the uninitialized function pointers with the defaults + */ + if (nand_scan_tail(mtd)) { + res = -ENXIO; + goto err_exit3; + } + + /* Standard layout in FLASH for bad block tables */ + if (host->ncfg->use_bbt) { + if (nand_default_bbt(mtd) < 0) + dev_err(&pdev->dev, + "Error initializing default bad block tables\n"); + } + + mtd->name = "nxp_lpc3220_slc"; + ppdata.of_node = pdev->dev.of_node; + res = mtd_device_parse_register(mtd, NULL, &ppdata, host->ncfg->parts, + host->ncfg->num_parts); + if (!res) + return res; + + nand_release(mtd); + +err_exit3: + dma_release_channel(host->dma_chan); +err_exit2: + clk_disable(host->clk); + clk_put(host->clk); + platform_set_drvdata(pdev, NULL); +err_exit1: + lpc32xx_wp_enable(host); + gpio_free(host->ncfg->wp_gpio); + + return res; +} + +/* + * Remove NAND device. + */ +static int __devexit lpc32xx_nand_remove(struct platform_device *pdev) +{ + uint32_t tmp; + struct lpc32xx_nand_host *host = platform_get_drvdata(pdev); + struct mtd_info *mtd = &host->mtd; + + nand_release(mtd); + dma_release_channel(host->dma_chan); + + /* Force CE high */ + tmp = readl(SLC_CTRL(host->io_base)); + tmp &= ~SLCCFG_CE_LOW; + writel(tmp, SLC_CTRL(host->io_base)); + + clk_disable(host->clk); + clk_put(host->clk); + platform_set_drvdata(pdev, NULL); + lpc32xx_wp_enable(host); + gpio_free(host->ncfg->wp_gpio); + + return 0; +} + +#ifdef CONFIG_PM +static int lpc32xx_nand_resume(struct platform_device *pdev) +{ + struct lpc32xx_nand_host *host = platform_get_drvdata(pdev); + + /* Re-enable NAND clock */ + clk_enable(host->clk); + + /* Fresh init of NAND controller */ + lpc32xx_nand_setup(host); + + /* Disable write protect */ + lpc32xx_wp_disable(host); + + return 0; +} + +static int lpc32xx_nand_suspend(struct platform_device *pdev, pm_message_t pm) +{ + uint32_t tmp; + struct lpc32xx_nand_host *host = platform_get_drvdata(pdev); + + /* Force CE high */ + tmp = readl(SLC_CTRL(host->io_base)); + tmp &= ~SLCCFG_CE_LOW; + writel(tmp, SLC_CTRL(host->io_base)); + + /* Enable write protect for safety */ + lpc32xx_wp_enable(host); + + /* Disable clock */ + clk_disable(host->clk); + + return 0; +} + +#else +#define lpc32xx_nand_resume NULL +#define lpc32xx_nand_suspend NULL +#endif + +static const struct of_device_id lpc32xx_nand_match[] = { + { .compatible = "nxp,lpc3220-slc" }, + { /* sentinel */ }, +}; +MODULE_DEVICE_TABLE(of, lpc32xx_nand_match); + +static struct platform_driver lpc32xx_nand_driver = { + .probe = lpc32xx_nand_probe, + .remove = __devexit_p(lpc32xx_nand_remove), + .resume = lpc32xx_nand_resume, + .suspend = lpc32xx_nand_suspend, + .driver = { + .name = LPC32XX_MODNAME, + .owner = THIS_MODULE, + .of_match_table = of_match_ptr(lpc32xx_nand_match), + }, +}; + +module_platform_driver(lpc32xx_nand_driver); + +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Kevin Wells <kevin.wells@nxp.com>"); +MODULE_AUTHOR("Roland Stigge <stigge@antcom.de>"); +MODULE_DESCRIPTION("NAND driver for the NXP LPC32XX SLC controller"); diff --git a/drivers/mtd/nand/mpc5121_nfc.c b/drivers/mtd/nand/mpc5121_nfc.c index c259c24..f776c85 100644 --- a/drivers/mtd/nand/mpc5121_nfc.c +++ b/drivers/mtd/nand/mpc5121_nfc.c @@ -506,27 +506,6 @@ static void mpc5121_nfc_write_buf(struct mtd_info *mtd, mpc5121_nfc_buf_copy(mtd, (u_char *)buf, len, 1); } -/* Compare buffer with NAND flash */ -static int mpc5121_nfc_verify_buf(struct mtd_info *mtd, - const u_char *buf, int len) -{ - u_char tmp[256]; - uint bsize; - - while (len) { - bsize = min(len, 256); - mpc5121_nfc_read_buf(mtd, tmp, bsize); - - if (memcmp(buf, tmp, bsize)) - return 1; - - buf += bsize; - len -= bsize; - } - - return 0; -} - /* Read byte from NFC buffers */ static u8 mpc5121_nfc_read_byte(struct mtd_info *mtd) { @@ -732,7 +711,6 @@ static int __devinit mpc5121_nfc_probe(struct platform_device *op) chip->read_word = mpc5121_nfc_read_word; chip->read_buf = mpc5121_nfc_read_buf; chip->write_buf = mpc5121_nfc_write_buf; - chip->verify_buf = mpc5121_nfc_verify_buf; chip->select_chip = mpc5121_nfc_select_chip; chip->bbt_options = NAND_BBT_USE_FLASH; chip->ecc.mode = NAND_ECC_SOFT; diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c index 5683604..72e31d8 100644 --- a/drivers/mtd/nand/mxc_nand.c +++ b/drivers/mtd/nand/mxc_nand.c @@ -43,8 +43,8 @@ #define nfc_is_v21() (cpu_is_mx25() || cpu_is_mx35()) #define nfc_is_v1() (cpu_is_mx31() || cpu_is_mx27() || cpu_is_mx21()) -#define nfc_is_v3_2() (cpu_is_mx51() || cpu_is_mx53()) -#define nfc_is_v3() nfc_is_v3_2() +#define nfc_is_v3_2a() cpu_is_mx51() +#define nfc_is_v3_2b() cpu_is_mx53() /* Addresses for NFC registers */ #define NFC_V1_V2_BUF_SIZE (host->regs + 0x00) @@ -122,7 +122,7 @@ #define NFC_V3_CONFIG2_2CMD_PHASES (1 << 4) #define NFC_V3_CONFIG2_NUM_ADDR_PHASE0 (1 << 5) #define NFC_V3_CONFIG2_ECC_MODE_8 (1 << 6) -#define NFC_V3_CONFIG2_PPB(x) (((x) & 0x3) << 7) +#define NFC_V3_CONFIG2_PPB(x, shift) (((x) & 0x3) << shift) #define NFC_V3_CONFIG2_NUM_ADDR_PHASE1(x) (((x) & 0x3) << 12) #define NFC_V3_CONFIG2_INT_MSK (1 << 15) #define NFC_V3_CONFIG2_ST_CMD(x) (((x) & 0xff) << 24) @@ -174,6 +174,7 @@ struct mxc_nand_devtype_data { int spare_len; int eccbytes; int eccsize; + int ppb_shift; }; struct mxc_nand_host { @@ -745,14 +746,6 @@ static void mxc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) host->buf_start += n; } -/* Used by the upper layer to verify the data in NAND Flash - * with the data in the buf. */ -static int mxc_nand_verify_buf(struct mtd_info *mtd, - const u_char *buf, int len) -{ - return -EFAULT; -} - /* This function is used by upper layer for select and * deselect of the NAND chip */ static void mxc_nand_select_chip_v1_v3(struct mtd_info *mtd, int chip) @@ -784,7 +777,7 @@ static void mxc_nand_select_chip_v2(struct mtd_info *mtd, int chip) if (chip == -1) { /* Disable the NFC clock */ if (host->clk_act) { - clk_disable(host->clk); + clk_disable_unprepare(host->clk); host->clk_act = 0; } return; @@ -792,7 +785,7 @@ static void mxc_nand_select_chip_v2(struct mtd_info *mtd, int chip) if (!host->clk_act) { /* Enable the NFC clock */ - clk_enable(host->clk); + clk_prepare_enable(host->clk); host->clk_act = 1; } @@ -1021,7 +1014,9 @@ static void preset_v3(struct mtd_info *mtd) } if (mtd->writesize) { - config2 |= NFC_V3_CONFIG2_PPB(ffs(mtd->erasesize / mtd->writesize) - 6); + config2 |= NFC_V3_CONFIG2_PPB( + ffs(mtd->erasesize / mtd->writesize) - 6, + host->devtype_data->ppb_shift); host->eccsize = get_eccsize(mtd); if (host->eccsize == 8) config2 |= NFC_V3_CONFIG2_ECC_MODE_8; @@ -1234,7 +1229,7 @@ static const struct mxc_nand_devtype_data imx25_nand_devtype_data = { .eccsize = 0, }; -/* v3: i.MX51, i.MX53 */ +/* v3.2a: i.MX51 */ static const struct mxc_nand_devtype_data imx51_nand_devtype_data = { .preset = preset_v3, .send_cmd = send_cmd_v3, @@ -1258,6 +1253,34 @@ static const struct mxc_nand_devtype_data imx51_nand_devtype_data = { .spare_len = 64, .eccbytes = 0, .eccsize = 0, + .ppb_shift = 7, +}; + +/* v3.2b: i.MX53 */ +static const struct mxc_nand_devtype_data imx53_nand_devtype_data = { + .preset = preset_v3, + .send_cmd = send_cmd_v3, + .send_addr = send_addr_v3, + .send_page = send_page_v3, + .send_read_id = send_read_id_v3, + .get_dev_status = get_dev_status_v3, + .check_int = check_int_v3, + .irq_control = irq_control_v3, + .get_ecc_status = get_ecc_status_v3, + .ecclayout_512 = &nandv2_hw_eccoob_smallpage, + .ecclayout_2k = &nandv2_hw_eccoob_largepage, + .ecclayout_4k = &nandv2_hw_eccoob_smallpage, /* XXX: needs fix */ + .select_chip = mxc_nand_select_chip_v1_v3, + .correct_data = mxc_nand_correct_data_v2_v3, + .irqpending_quirk = 0, + .needs_ip = 1, + .regs_offset = 0, + .spare0_offset = 0x1000, + .axi_offset = 0x1e00, + .spare_len = 64, + .eccbytes = 0, + .eccsize = 0, + .ppb_shift = 8, }; #ifdef CONFIG_OF_MTD @@ -1274,6 +1297,9 @@ static const struct of_device_id mxcnd_dt_ids[] = { }, { .compatible = "fsl,imx51-nand", .data = &imx51_nand_devtype_data, + }, { + .compatible = "fsl,imx53-nand", + .data = &imx53_nand_devtype_data, }, { /* sentinel */ } }; @@ -1327,15 +1353,17 @@ static int __init mxcnd_probe_pdata(struct mxc_nand_host *host) host->devtype_data = &imx27_nand_devtype_data; } else if (nfc_is_v21()) { host->devtype_data = &imx25_nand_devtype_data; - } else if (nfc_is_v3_2()) { + } else if (nfc_is_v3_2a()) { host->devtype_data = &imx51_nand_devtype_data; + } else if (nfc_is_v3_2b()) { + host->devtype_data = &imx53_nand_devtype_data; } else BUG(); return 0; } -static int __init mxcnd_probe(struct platform_device *pdev) +static int __devinit mxcnd_probe(struct platform_device *pdev) { struct nand_chip *this; struct mtd_info *mtd; @@ -1344,8 +1372,8 @@ static int __init mxcnd_probe(struct platform_device *pdev) int err = 0; /* Allocate memory for MTD device structure and private data */ - host = kzalloc(sizeof(struct mxc_nand_host) + NAND_MAX_PAGESIZE + - NAND_MAX_OOBSIZE, GFP_KERNEL); + host = devm_kzalloc(&pdev->dev, sizeof(struct mxc_nand_host) + + NAND_MAX_PAGESIZE + NAND_MAX_OOBSIZE, GFP_KERNEL); if (!host) return -ENOMEM; @@ -1370,36 +1398,38 @@ static int __init mxcnd_probe(struct platform_device *pdev) this->read_word = mxc_nand_read_word; this->write_buf = mxc_nand_write_buf; this->read_buf = mxc_nand_read_buf; - this->verify_buf = mxc_nand_verify_buf; - host->clk = clk_get(&pdev->dev, "nfc"); - if (IS_ERR(host->clk)) { - err = PTR_ERR(host->clk); - goto eclk; - } + host->clk = devm_clk_get(&pdev->dev, NULL); + if (IS_ERR(host->clk)) + return PTR_ERR(host->clk); - clk_prepare_enable(host->clk); - host->clk_act = 1; + err = mxcnd_probe_dt(host); + if (err > 0) + err = mxcnd_probe_pdata(host); + if (err < 0) + return err; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - err = -ENODEV; - goto eres; - } + if (host->devtype_data->needs_ip) { + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -ENODEV; + host->regs_ip = devm_request_and_ioremap(&pdev->dev, res); + if (!host->regs_ip) + return -ENOMEM; - host->base = ioremap(res->start, resource_size(res)); - if (!host->base) { - err = -ENOMEM; - goto eres; + res = platform_get_resource(pdev, IORESOURCE_MEM, 1); + } else { + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); } - host->main_area0 = host->base; + if (!res) + return -ENODEV; - err = mxcnd_probe_dt(host); - if (err > 0) - err = mxcnd_probe_pdata(host); - if (err < 0) - goto eirq; + host->base = devm_request_and_ioremap(&pdev->dev, res); + if (!host->base) + return -ENOMEM; + + host->main_area0 = host->base; if (host->devtype_data->regs_offset) host->regs = host->base + host->devtype_data->regs_offset; @@ -1414,19 +1444,6 @@ static int __init mxcnd_probe(struct platform_device *pdev) this->ecc.size = 512; this->ecc.layout = host->devtype_data->ecclayout_512; - if (host->devtype_data->needs_ip) { - res = platform_get_resource(pdev, IORESOURCE_MEM, 1); - if (!res) { - err = -ENODEV; - goto eirq; - } - host->regs_ip = ioremap(res->start, resource_size(res)); - if (!host->regs_ip) { - err = -ENOMEM; - goto eirq; - } - } - if (host->pdata.hw_ecc) { this->ecc.calculate = mxc_nand_calculate_ecc; this->ecc.hwctl = mxc_nand_enable_hwecc; @@ -1458,9 +1475,13 @@ static int __init mxcnd_probe(struct platform_device *pdev) */ host->devtype_data->irq_control(host, 0); - err = request_irq(host->irq, mxc_nfc_irq, IRQF_DISABLED, DRIVER_NAME, host); + err = devm_request_irq(&pdev->dev, host->irq, mxc_nfc_irq, + IRQF_DISABLED, DRIVER_NAME, host); if (err) - goto eirq; + return err; + + clk_prepare_enable(host->clk); + host->clk_act = 1; /* * Now that we "own" the interrupt make sure the interrupt mask bit is @@ -1512,15 +1533,7 @@ static int __init mxcnd_probe(struct platform_device *pdev) return 0; escan: - free_irq(host->irq, host); -eirq: - if (host->regs_ip) - iounmap(host->regs_ip); - iounmap(host->base); -eres: - clk_put(host->clk); -eclk: - kfree(host); + clk_disable_unprepare(host->clk); return err; } @@ -1529,16 +1542,9 @@ static int __devexit mxcnd_remove(struct platform_device *pdev) { struct mxc_nand_host *host = platform_get_drvdata(pdev); - clk_put(host->clk); - platform_set_drvdata(pdev, NULL); nand_release(&host->mtd); - free_irq(host->irq, host); - if (host->regs_ip) - iounmap(host->regs_ip); - iounmap(host->base); - kfree(host); return 0; } @@ -1549,22 +1555,10 @@ static struct platform_driver mxcnd_driver = { .owner = THIS_MODULE, .of_match_table = of_match_ptr(mxcnd_dt_ids), }, + .probe = mxcnd_probe, .remove = __devexit_p(mxcnd_remove), }; - -static int __init mxc_nd_init(void) -{ - return platform_driver_probe(&mxcnd_driver, mxcnd_probe); -} - -static void __exit mxc_nd_cleanup(void) -{ - /* Unregister the device structure */ - platform_driver_unregister(&mxcnd_driver); -} - -module_init(mxc_nd_init); -module_exit(mxc_nd_cleanup); +module_platform_driver(mxcnd_driver); MODULE_AUTHOR("Freescale Semiconductor, Inc."); MODULE_DESCRIPTION("MXC NAND MTD driver"); diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index a11253a0..ec6841d 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -243,25 +243,6 @@ static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) } /** - * nand_verify_buf - [DEFAULT] Verify chip data against buffer - * @mtd: MTD device structure - * @buf: buffer containing the data to compare - * @len: number of bytes to compare - * - * Default verify function for 8bit buswidth. - */ -static int nand_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len) -{ - int i; - struct nand_chip *chip = mtd->priv; - - for (i = 0; i < len; i++) - if (buf[i] != readb(chip->IO_ADDR_R)) - return -EFAULT; - return 0; -} - -/** * nand_write_buf16 - [DEFAULT] write buffer to chip * @mtd: MTD device structure * @buf: data buffer @@ -301,28 +282,6 @@ static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len) } /** - * nand_verify_buf16 - [DEFAULT] Verify chip data against buffer - * @mtd: MTD device structure - * @buf: buffer containing the data to compare - * @len: number of bytes to compare - * - * Default verify function for 16bit buswidth. - */ -static int nand_verify_buf16(struct mtd_info *mtd, const uint8_t *buf, int len) -{ - int i; - struct nand_chip *chip = mtd->priv; - u16 *p = (u16 *) buf; - len >>= 1; - - for (i = 0; i < len; i++) - if (p[i] != readw(chip->IO_ADDR_R)) - return -EFAULT; - - return 0; -} - -/** * nand_block_bad - [DEFAULT] Read bad block marker from the chip * @mtd: MTD device structure * @ofs: offset from device start @@ -1525,7 +1484,8 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, ret = chip->ecc.read_page_raw(mtd, chip, bufpoi, oob_required, page); - else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob) + else if (!aligned && NAND_HAS_SUBPAGE_READ(chip) && + !oob) ret = chip->ecc.read_subpage(mtd, chip, col, bytes, bufpoi); else @@ -1542,7 +1502,7 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, /* Transfer not aligned data */ if (!aligned) { - if (!NAND_SUBPAGE_READ(chip) && !oob && + if (!NAND_HAS_SUBPAGE_READ(chip) && !oob && !(mtd->ecc_stats.failed - stats.failed) && (ops->mode != MTD_OPS_RAW)) { chip->pagebuf = realpage; @@ -1565,14 +1525,6 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from, oobreadlen -= toread; } } - - if (!(chip->options & NAND_NO_READRDY)) { - /* Apply delay or wait for ready/busy pin */ - if (!chip->dev_ready) - udelay(chip->chip_delay); - else - nand_wait_ready(mtd); - } } else { memcpy(buf, chip->buffers->databuf + col, bytes); buf += bytes; @@ -1633,7 +1585,7 @@ static int nand_read(struct mtd_info *mtd, loff_t from, size_t len, ops.len = len; ops.datbuf = buf; ops.oobbuf = NULL; - ops.mode = 0; + ops.mode = MTD_OPS_PLACE_OOB; ret = nand_do_read_ops(mtd, from, &ops); *retlen = ops.retlen; nand_release_device(mtd); @@ -1837,14 +1789,6 @@ static int nand_do_read_oob(struct mtd_info *mtd, loff_t from, len = min(len, readlen); buf = nand_transfer_oob(chip, buf, ops, len); - if (!(chip->options & NAND_NO_READRDY)) { - /* Apply delay or wait for ready/busy pin */ - if (!chip->dev_ready) - udelay(chip->chip_delay); - else - nand_wait_ready(mtd); - } - readlen -= len; if (!readlen) break; @@ -1927,12 +1871,14 @@ out: * * Not for syndrome calculating ECC controllers, which use a special oob layout. */ -static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, +static int nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required) { chip->write_buf(mtd, buf, mtd->writesize); if (oob_required) chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); + + return 0; } /** @@ -1944,7 +1890,7 @@ static void nand_write_page_raw(struct mtd_info *mtd, struct nand_chip *chip, * * We need a special oob layout and handling even when ECC isn't checked. */ -static void nand_write_page_raw_syndrome(struct mtd_info *mtd, +static int nand_write_page_raw_syndrome(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required) { @@ -1974,6 +1920,8 @@ static void nand_write_page_raw_syndrome(struct mtd_info *mtd, size = mtd->oobsize - (oob - chip->oob_poi); if (size) chip->write_buf(mtd, oob, size); + + return 0; } /** * nand_write_page_swecc - [REPLACEABLE] software ECC based page write function @@ -1982,7 +1930,7 @@ static void nand_write_page_raw_syndrome(struct mtd_info *mtd, * @buf: data buffer * @oob_required: must write chip->oob_poi to OOB */ -static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, +static int nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required) { int i, eccsize = chip->ecc.size; @@ -1999,7 +1947,7 @@ static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, for (i = 0; i < chip->ecc.total; i++) chip->oob_poi[eccpos[i]] = ecc_calc[i]; - chip->ecc.write_page_raw(mtd, chip, buf, 1); + return chip->ecc.write_page_raw(mtd, chip, buf, 1); } /** @@ -2009,7 +1957,7 @@ static void nand_write_page_swecc(struct mtd_info *mtd, struct nand_chip *chip, * @buf: data buffer * @oob_required: must write chip->oob_poi to OOB */ -static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, +static int nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required) { int i, eccsize = chip->ecc.size; @@ -2029,6 +1977,8 @@ static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, chip->oob_poi[eccpos[i]] = ecc_calc[i]; chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); + + return 0; } /** @@ -2041,7 +1991,7 @@ static void nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, * The hw generator calculates the error syndrome automatically. Therefore we * need a special oob layout and handling. */ -static void nand_write_page_syndrome(struct mtd_info *mtd, +static int nand_write_page_syndrome(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required) { @@ -2075,6 +2025,8 @@ static void nand_write_page_syndrome(struct mtd_info *mtd, i = mtd->oobsize - (oob - chip->oob_poi); if (i) chip->write_buf(mtd, oob, i); + + return 0; } /** @@ -2096,9 +2048,12 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, chip->cmdfunc(mtd, NAND_CMD_SEQIN, 0x00, page); if (unlikely(raw)) - chip->ecc.write_page_raw(mtd, chip, buf, oob_required); + status = chip->ecc.write_page_raw(mtd, chip, buf, oob_required); else - chip->ecc.write_page(mtd, chip, buf, oob_required); + status = chip->ecc.write_page(mtd, chip, buf, oob_required); + + if (status < 0) + return status; /* * Cached progamming disabled for now. Not sure if it's worth the @@ -2125,16 +2080,6 @@ static int nand_write_page(struct mtd_info *mtd, struct nand_chip *chip, status = chip->waitfunc(mtd, chip); } -#ifdef CONFIG_MTD_NAND_VERIFY_WRITE - /* Send command to read back the data */ - chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page); - - if (chip->verify_buf(mtd, buf, mtd->writesize)) - return -EIO; - - /* Make sure the next page prog is preceded by a status read */ - chip->cmdfunc(mtd, NAND_CMD_STATUS, -1, -1); -#endif return 0; } @@ -2336,7 +2281,7 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len, ops.len = len; ops.datbuf = (uint8_t *)buf; ops.oobbuf = NULL; - ops.mode = 0; + ops.mode = MTD_OPS_PLACE_OOB; ret = nand_do_write_ops(mtd, to, &ops); @@ -2365,7 +2310,7 @@ static int nand_write(struct mtd_info *mtd, loff_t to, size_t len, ops.len = len; ops.datbuf = (uint8_t *)buf; ops.oobbuf = NULL; - ops.mode = 0; + ops.mode = MTD_OPS_PLACE_OOB; ret = nand_do_write_ops(mtd, to, &ops); *retlen = ops.retlen; nand_release_device(mtd); @@ -2755,6 +2700,50 @@ static int nand_block_markbad(struct mtd_info *mtd, loff_t ofs) } /** + * nand_onfi_set_features- [REPLACEABLE] set features for ONFI nand + * @mtd: MTD device structure + * @chip: nand chip info structure + * @addr: feature address. + * @subfeature_param: the subfeature parameters, a four bytes array. + */ +static int nand_onfi_set_features(struct mtd_info *mtd, struct nand_chip *chip, + int addr, uint8_t *subfeature_param) +{ + int status; + + if (!chip->onfi_version) + return -EINVAL; + + chip->cmdfunc(mtd, NAND_CMD_SET_FEATURES, addr, -1); + chip->write_buf(mtd, subfeature_param, ONFI_SUBFEATURE_PARAM_LEN); + status = chip->waitfunc(mtd, chip); + if (status & NAND_STATUS_FAIL) + return -EIO; + return 0; +} + +/** + * nand_onfi_get_features- [REPLACEABLE] get features for ONFI nand + * @mtd: MTD device structure + * @chip: nand chip info structure + * @addr: feature address. + * @subfeature_param: the subfeature parameters, a four bytes array. + */ +static int nand_onfi_get_features(struct mtd_info *mtd, struct nand_chip *chip, + int addr, uint8_t *subfeature_param) +{ + if (!chip->onfi_version) + return -EINVAL; + + /* clear the sub feature parameters */ + memset(subfeature_param, 0, ONFI_SUBFEATURE_PARAM_LEN); + + chip->cmdfunc(mtd, NAND_CMD_GET_FEATURES, addr, -1); + chip->read_buf(mtd, subfeature_param, ONFI_SUBFEATURE_PARAM_LEN); + return 0; +} + +/** * nand_suspend - [MTD Interface] Suspend the NAND flash * @mtd: MTD device structure */ @@ -2809,8 +2798,6 @@ static void nand_set_defaults(struct nand_chip *chip, int busw) chip->write_buf = busw ? nand_write_buf16 : nand_write_buf; if (!chip->read_buf) chip->read_buf = busw ? nand_read_buf16 : nand_read_buf; - if (!chip->verify_buf) - chip->verify_buf = busw ? nand_verify_buf16 : nand_verify_buf; if (!chip->scan_bbt) chip->scan_bbt = nand_default_bbt; @@ -2914,14 +2901,250 @@ static int nand_flash_detect_onfi(struct mtd_info *mtd, struct nand_chip *chip, if (le16_to_cpu(p->features) & 1) *busw = NAND_BUSWIDTH_16; - chip->options &= ~NAND_CHIPOPTIONS_MSK; - chip->options |= NAND_NO_READRDY & NAND_CHIPOPTIONS_MSK; - pr_info("ONFI flash detected\n"); return 1; } /* + * nand_id_has_period - Check if an ID string has a given wraparound period + * @id_data: the ID string + * @arrlen: the length of the @id_data array + * @period: the period of repitition + * + * Check if an ID string is repeated within a given sequence of bytes at + * specific repetition interval period (e.g., {0x20,0x01,0x7F,0x20} has a + * period of 2). This is a helper function for nand_id_len(). Returns non-zero + * if the repetition has a period of @period; otherwise, returns zero. + */ +static int nand_id_has_period(u8 *id_data, int arrlen, int period) +{ + int i, j; + for (i = 0; i < period; i++) + for (j = i + period; j < arrlen; j += period) + if (id_data[i] != id_data[j]) + return 0; + return 1; +} + +/* + * nand_id_len - Get the length of an ID string returned by CMD_READID + * @id_data: the ID string + * @arrlen: the length of the @id_data array + + * Returns the length of the ID string, according to known wraparound/trailing + * zero patterns. If no pattern exists, returns the length of the array. + */ +static int nand_id_len(u8 *id_data, int arrlen) +{ + int last_nonzero, period; + + /* Find last non-zero byte */ + for (last_nonzero = arrlen - 1; last_nonzero >= 0; last_nonzero--) + if (id_data[last_nonzero]) + break; + + /* All zeros */ + if (last_nonzero < 0) + return 0; + + /* Calculate wraparound period */ + for (period = 1; period < arrlen; period++) + if (nand_id_has_period(id_data, arrlen, period)) + break; + + /* There's a repeated pattern */ + if (period < arrlen) + return period; + + /* There are trailing zeros */ + if (last_nonzero < arrlen - 1) + return last_nonzero + 1; + + /* No pattern detected */ + return arrlen; +} + +/* + * Many new NAND share similar device ID codes, which represent the size of the + * chip. The rest of the parameters must be decoded according to generic or + * manufacturer-specific "extended ID" decoding patterns. + */ +static void nand_decode_ext_id(struct mtd_info *mtd, struct nand_chip *chip, + u8 id_data[8], int *busw) +{ + int extid, id_len; + /* The 3rd id byte holds MLC / multichip data */ + chip->cellinfo = id_data[2]; + /* The 4th id byte is the important one */ + extid = id_data[3]; + + id_len = nand_id_len(id_data, 8); + + /* + * Field definitions are in the following datasheets: + * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32) + * New style (6 byte ID): Samsung K9GAG08U0F (p.44) + * Hynix MLC (6 byte ID): Hynix H27UBG8T2B (p.22) + * + * Check for ID length, cell type, and Hynix/Samsung ID to decide what + * to do. + */ + if (id_len == 6 && id_data[0] == NAND_MFR_SAMSUNG) { + /* Calc pagesize */ + mtd->writesize = 2048 << (extid & 0x03); + extid >>= 2; + /* Calc oobsize */ + switch (((extid >> 2) & 0x04) | (extid & 0x03)) { + case 1: + mtd->oobsize = 128; + break; + case 2: + mtd->oobsize = 218; + break; + case 3: + mtd->oobsize = 400; + break; + case 4: + mtd->oobsize = 436; + break; + case 5: + mtd->oobsize = 512; + break; + case 6: + default: /* Other cases are "reserved" (unknown) */ + mtd->oobsize = 640; + break; + } + extid >>= 2; + /* Calc blocksize */ + mtd->erasesize = (128 * 1024) << + (((extid >> 1) & 0x04) | (extid & 0x03)); + *busw = 0; + } else if (id_len == 6 && id_data[0] == NAND_MFR_HYNIX && + (chip->cellinfo & NAND_CI_CELLTYPE_MSK)) { + unsigned int tmp; + + /* Calc pagesize */ + mtd->writesize = 2048 << (extid & 0x03); + extid >>= 2; + /* Calc oobsize */ + switch (((extid >> 2) & 0x04) | (extid & 0x03)) { + case 0: + mtd->oobsize = 128; + break; + case 1: + mtd->oobsize = 224; + break; + case 2: + mtd->oobsize = 448; + break; + case 3: + mtd->oobsize = 64; + break; + case 4: + mtd->oobsize = 32; + break; + case 5: + mtd->oobsize = 16; + break; + default: + mtd->oobsize = 640; + break; + } + extid >>= 2; + /* Calc blocksize */ + tmp = ((extid >> 1) & 0x04) | (extid & 0x03); + if (tmp < 0x03) + mtd->erasesize = (128 * 1024) << tmp; + else if (tmp == 0x03) + mtd->erasesize = 768 * 1024; + else + mtd->erasesize = (64 * 1024) << tmp; + *busw = 0; + } else { + /* Calc pagesize */ + mtd->writesize = 1024 << (extid & 0x03); + extid >>= 2; + /* Calc oobsize */ + mtd->oobsize = (8 << (extid & 0x01)) * + (mtd->writesize >> 9); + extid >>= 2; + /* Calc blocksize. Blocksize is multiples of 64KiB */ + mtd->erasesize = (64 * 1024) << (extid & 0x03); + extid >>= 2; + /* Get buswidth information */ + *busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0; + } +} + +/* + * Old devices have chip data hardcoded in the device ID table. nand_decode_id + * decodes a matching ID table entry and assigns the MTD size parameters for + * the chip. + */ +static void nand_decode_id(struct mtd_info *mtd, struct nand_chip *chip, + struct nand_flash_dev *type, u8 id_data[8], + int *busw) +{ + int maf_id = id_data[0]; + + mtd->erasesize = type->erasesize; + mtd->writesize = type->pagesize; + mtd->oobsize = mtd->writesize / 32; + *busw = type->options & NAND_BUSWIDTH_16; + + /* + * Check for Spansion/AMD ID + repeating 5th, 6th byte since + * some Spansion chips have erasesize that conflicts with size + * listed in nand_ids table. + * Data sheet (5 byte ID): Spansion S30ML-P ORNAND (p.39) + */ + if (maf_id == NAND_MFR_AMD && id_data[4] != 0x00 && id_data[5] == 0x00 + && id_data[6] == 0x00 && id_data[7] == 0x00 + && mtd->writesize == 512) { + mtd->erasesize = 128 * 1024; + mtd->erasesize <<= ((id_data[3] & 0x03) << 1); + } +} + +/* + * Set the bad block marker/indicator (BBM/BBI) patterns according to some + * heuristic patterns using various detected parameters (e.g., manufacturer, + * page size, cell-type information). + */ +static void nand_decode_bbm_options(struct mtd_info *mtd, + struct nand_chip *chip, u8 id_data[8]) +{ + int maf_id = id_data[0]; + + /* Set the bad block position */ + if (mtd->writesize > 512 || (chip->options & NAND_BUSWIDTH_16)) + chip->badblockpos = NAND_LARGE_BADBLOCK_POS; + else + chip->badblockpos = NAND_SMALL_BADBLOCK_POS; + + /* + * Bad block marker is stored in the last page of each block on Samsung + * and Hynix MLC devices; stored in first two pages of each block on + * Micron devices with 2KiB pages and on SLC Samsung, Hynix, Toshiba, + * AMD/Spansion, and Macronix. All others scan only the first page. + */ + if ((chip->cellinfo & NAND_CI_CELLTYPE_MSK) && + (maf_id == NAND_MFR_SAMSUNG || + maf_id == NAND_MFR_HYNIX)) + chip->bbt_options |= NAND_BBT_SCANLASTPAGE; + else if ((!(chip->cellinfo & NAND_CI_CELLTYPE_MSK) && + (maf_id == NAND_MFR_SAMSUNG || + maf_id == NAND_MFR_HYNIX || + maf_id == NAND_MFR_TOSHIBA || + maf_id == NAND_MFR_AMD || + maf_id == NAND_MFR_MACRONIX)) || + (mtd->writesize == 2048 && + maf_id == NAND_MFR_MICRON)) + chip->bbt_options |= NAND_BBT_SCAN2NDPAGE; +} + +/* * Get the flash and manufacturer id and lookup if the type is supported. */ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, @@ -2932,7 +3155,6 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, { int i, maf_idx; u8 id_data[8]; - int ret; /* Select the device */ chip->select_chip(mtd, 0); @@ -2959,7 +3181,8 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); - for (i = 0; i < 2; i++) + /* Read entire ID string */ + for (i = 0; i < 8; i++) id_data[i] = chip->read_byte(mtd); if (id_data[0] != *maf_id || id_data[1] != *dev_id) { @@ -2979,18 +3202,10 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, chip->onfi_version = 0; if (!type->name || !type->pagesize) { /* Check is chip is ONFI compliant */ - ret = nand_flash_detect_onfi(mtd, chip, &busw); - if (ret) + if (nand_flash_detect_onfi(mtd, chip, &busw)) goto ident_done; } - chip->cmdfunc(mtd, NAND_CMD_READID, 0x00, -1); - - /* Read entire ID string */ - - for (i = 0; i < 8; i++) - id_data[i] = chip->read_byte(mtd); - if (!type->name) return ERR_PTR(-ENODEV); @@ -3003,86 +3218,13 @@ static struct nand_flash_dev *nand_get_flash_type(struct mtd_info *mtd, /* Set the pagesize, oobsize, erasesize by the driver */ busw = chip->init_size(mtd, chip, id_data); } else if (!type->pagesize) { - int extid; - /* The 3rd id byte holds MLC / multichip data */ - chip->cellinfo = id_data[2]; - /* The 4th id byte is the important one */ - extid = id_data[3]; - - /* - * Field definitions are in the following datasheets: - * Old style (4,5 byte ID): Samsung K9GAG08U0M (p.32) - * New style (6 byte ID): Samsung K9GBG08U0M (p.40) - * - * Check for wraparound + Samsung ID + nonzero 6th byte - * to decide what to do. - */ - if (id_data[0] == id_data[6] && id_data[1] == id_data[7] && - id_data[0] == NAND_MFR_SAMSUNG && - (chip->cellinfo & NAND_CI_CELLTYPE_MSK) && - id_data[5] != 0x00) { - /* Calc pagesize */ - mtd->writesize = 2048 << (extid & 0x03); - extid >>= 2; - /* Calc oobsize */ - switch (extid & 0x03) { - case 1: - mtd->oobsize = 128; - break; - case 2: - mtd->oobsize = 218; - break; - case 3: - mtd->oobsize = 400; - break; - default: - mtd->oobsize = 436; - break; - } - extid >>= 2; - /* Calc blocksize */ - mtd->erasesize = (128 * 1024) << - (((extid >> 1) & 0x04) | (extid & 0x03)); - busw = 0; - } else { - /* Calc pagesize */ - mtd->writesize = 1024 << (extid & 0x03); - extid >>= 2; - /* Calc oobsize */ - mtd->oobsize = (8 << (extid & 0x01)) * - (mtd->writesize >> 9); - extid >>= 2; - /* Calc blocksize. Blocksize is multiples of 64KiB */ - mtd->erasesize = (64 * 1024) << (extid & 0x03); - extid >>= 2; - /* Get buswidth information */ - busw = (extid & 0x01) ? NAND_BUSWIDTH_16 : 0; - } + /* Decode parameters from extended ID */ + nand_decode_ext_id(mtd, chip, id_data, &busw); } else { - /* - * Old devices have chip data hardcoded in the device id table. - */ - mtd->erasesize = type->erasesize; - mtd->writesize = type->pagesize; - mtd->oobsize = mtd->writesize / 32; - busw = type->options & NAND_BUSWIDTH_16; - - /* - * Check for Spansion/AMD ID + repeating 5th, 6th byte since - * some Spansion chips have erasesize that conflicts with size - * listed in nand_ids table. - * Data sheet (5 byte ID): Spansion S30ML-P ORNAND (p.39) - */ - if (*maf_id == NAND_MFR_AMD && id_data[4] != 0x00 && - id_data[5] == 0x00 && id_data[6] == 0x00 && - id_data[7] == 0x00 && mtd->writesize == 512) { - mtd->erasesize = 128 * 1024; - mtd->erasesize <<= ((id_data[3] & 0x03) << 1); - } + nand_decode_id(mtd, chip, type, id_data, &busw); } - /* Get chip options, preserve non chip based options */ - chip->options &= ~NAND_CHIPOPTIONS_MSK; - chip->options |= type->options & NAND_CHIPOPTIONS_MSK; + /* Get chip options */ + chip->options |= type->options; /* * Check if chip is not a Samsung device. Do not clear the @@ -3112,6 +3254,8 @@ ident_done: return ERR_PTR(-EINVAL); } + nand_decode_bbm_options(mtd, chip, id_data); + /* Calculate the address shift from the page size */ chip->page_shift = ffs(mtd->writesize) - 1; /* Convert chipsize to number of pages per chip -1 */ @@ -3128,33 +3272,6 @@ ident_done: chip->badblockbits = 8; - /* Set the bad block position */ - if (mtd->writesize > 512 || (busw & NAND_BUSWIDTH_16)) - chip->badblockpos = NAND_LARGE_BADBLOCK_POS; - else - chip->badblockpos = NAND_SMALL_BADBLOCK_POS; - - /* - * Bad block marker is stored in the last page of each block - * on Samsung and Hynix MLC devices; stored in first two pages - * of each block on Micron devices with 2KiB pages and on - * SLC Samsung, Hynix, Toshiba, AMD/Spansion, and Macronix. - * All others scan only the first page. - */ - if ((chip->cellinfo & NAND_CI_CELLTYPE_MSK) && - (*maf_id == NAND_MFR_SAMSUNG || - *maf_id == NAND_MFR_HYNIX)) - chip->bbt_options |= NAND_BBT_SCANLASTPAGE; - else if ((!(chip->cellinfo & NAND_CI_CELLTYPE_MSK) && - (*maf_id == NAND_MFR_SAMSUNG || - *maf_id == NAND_MFR_HYNIX || - *maf_id == NAND_MFR_TOSHIBA || - *maf_id == NAND_MFR_AMD || - *maf_id == NAND_MFR_MACRONIX)) || - (mtd->writesize == 2048 && - *maf_id == NAND_MFR_MICRON)) - chip->bbt_options |= NAND_BBT_SCAN2NDPAGE; - /* Check for AND chips with 4 page planes */ if (chip->options & NAND_4PAGE_ARRAY) chip->erase_cmd = multi_erase_cmd; @@ -3284,6 +3401,12 @@ int nand_scan_tail(struct mtd_info *mtd) if (!chip->write_page) chip->write_page = nand_write_page; + /* set for ONFI nand */ + if (!chip->onfi_set_features) + chip->onfi_set_features = nand_onfi_set_features; + if (!chip->onfi_get_features) + chip->onfi_get_features = nand_onfi_get_features; + /* * Check ECC mode, default to software if 3byte/512byte hardware ECC is * selected and we have 256 byte pagesize fallback to software ECC @@ -3477,6 +3600,10 @@ int nand_scan_tail(struct mtd_info *mtd) /* Invalidate the pagebuffer reference */ chip->pagebuf = -1; + /* Large page NAND with SOFT_ECC should support subpage reads */ + if ((chip->ecc.mode == NAND_ECC_SOFT) && (chip->page_shift > 9)) + chip->options |= NAND_SUBPAGE_READ; + /* Fill in remaining MTD driver data */ mtd->type = MTD_NANDFLASH; mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM : diff --git a/drivers/mtd/nand/nand_bbt.c b/drivers/mtd/nand/nand_bbt.c index 30d1319..916d6e9 100644 --- a/drivers/mtd/nand/nand_bbt.c +++ b/drivers/mtd/nand/nand_bbt.c @@ -4,7 +4,7 @@ * Overview: * Bad block table support for the NAND driver * - * Copyright (C) 2004 Thomas Gleixner (tglx@linutronix.de) + * Copyright © 2004 Thomas Gleixner (tglx@linutronix.de) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -22,7 +22,7 @@ * BBT on flash. If a BBT is found then the contents are read and the memory * based BBT is created. If a mirrored BBT is selected then the mirror is * searched too and the versions are compared. If the mirror has a greater - * version number than the mirror BBT is used to build the memory based BBT. + * version number, then the mirror BBT is used to build the memory based BBT. * If the tables are not versioned, then we "or" the bad block information. * If one of the BBTs is out of date or does not exist it is (re)created. * If no BBT exists at all then the device is scanned for factory marked @@ -62,21 +62,20 @@ #include <linux/slab.h> #include <linux/types.h> #include <linux/mtd/mtd.h> +#include <linux/mtd/bbm.h> #include <linux/mtd/nand.h> #include <linux/mtd/nand_ecc.h> #include <linux/bitops.h> #include <linux/delay.h> #include <linux/vmalloc.h> #include <linux/export.h> +#include <linux/string.h> static int check_pattern_no_oob(uint8_t *buf, struct nand_bbt_descr *td) { - int ret; - - ret = memcmp(buf, td->pattern, td->len); - if (!ret) - return ret; - return -1; + if (memcmp(buf, td->pattern, td->len)) + return -1; + return 0; } /** @@ -92,19 +91,16 @@ static int check_pattern_no_oob(uint8_t *buf, struct nand_bbt_descr *td) */ static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_descr *td) { - int i, end = 0; + int end = 0; uint8_t *p = buf; if (td->options & NAND_BBT_NO_OOB) return check_pattern_no_oob(buf, td); end = paglen + td->offs; - if (td->options & NAND_BBT_SCANEMPTY) { - for (i = 0; i < end; i++) { - if (p[i] != 0xff) - return -1; - } - } + if (td->options & NAND_BBT_SCANEMPTY) + if (memchr_inv(p, 0xff, end)) + return -1; p += end; /* Compare the pattern */ @@ -114,10 +110,8 @@ static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_desc if (td->options & NAND_BBT_SCANEMPTY) { p += td->len; end += td->len; - for (i = end; i < len; i++) { - if (*p++ != 0xff) - return -1; - } + if (memchr_inv(p, 0xff, len - end)) + return -1; } return 0; } @@ -133,14 +127,9 @@ static int check_pattern(uint8_t *buf, int len, int paglen, struct nand_bbt_desc */ static int check_short_pattern(uint8_t *buf, struct nand_bbt_descr *td) { - int i; - uint8_t *p = buf; - /* Compare the pattern */ - for (i = 0; i < td->len; i++) { - if (p[td->offs + i] != td->pattern[i]) - return -1; - } + if (memcmp(buf + td->offs, td->pattern, td->len)) + return -1; return 0; } @@ -288,7 +277,7 @@ static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_desc } /* BBT marker is in the first page, no OOB */ -static int scan_read_raw_data(struct mtd_info *mtd, uint8_t *buf, loff_t offs, +static int scan_read_data(struct mtd_info *mtd, uint8_t *buf, loff_t offs, struct nand_bbt_descr *td) { size_t retlen; @@ -301,14 +290,24 @@ static int scan_read_raw_data(struct mtd_info *mtd, uint8_t *buf, loff_t offs, return mtd_read(mtd, offs, len, &retlen, buf); } -/* Scan read raw data from flash */ -static int scan_read_raw_oob(struct mtd_info *mtd, uint8_t *buf, loff_t offs, +/** + * scan_read_oob - [GENERIC] Scan data+OOB region to buffer + * @mtd: MTD device structure + * @buf: temporary buffer + * @offs: offset at which to scan + * @len: length of data region to read + * + * Scan read data from data+OOB. May traverse multiple pages, interleaving + * page,OOB,page,OOB,... in buf. Completes transfer and returns the "strongest" + * ECC condition (error or bitflip). May quit on the first (non-ECC) error. + */ +static int scan_read_oob(struct mtd_info *mtd, uint8_t *buf, loff_t offs, size_t len) { struct mtd_oob_ops ops; - int res; + int res, ret = 0; - ops.mode = MTD_OPS_RAW; + ops.mode = MTD_OPS_PLACE_OOB; ops.ooboffs = 0; ops.ooblen = mtd->oobsize; @@ -318,24 +317,27 @@ static int scan_read_raw_oob(struct mtd_info *mtd, uint8_t *buf, loff_t offs, ops.oobbuf = buf + ops.len; res = mtd_read_oob(mtd, offs, &ops); - - if (res) - return res; + if (res) { + if (!mtd_is_bitflip_or_eccerr(res)) + return res; + else if (mtd_is_eccerr(res) || !ret) + ret = res; + } buf += mtd->oobsize + mtd->writesize; len -= mtd->writesize; offs += mtd->writesize; } - return 0; + return ret; } -static int scan_read_raw(struct mtd_info *mtd, uint8_t *buf, loff_t offs, +static int scan_read(struct mtd_info *mtd, uint8_t *buf, loff_t offs, size_t len, struct nand_bbt_descr *td) { if (td->options & NAND_BBT_NO_OOB) - return scan_read_raw_data(mtd, buf, offs, td); + return scan_read_data(mtd, buf, offs, td); else - return scan_read_raw_oob(mtd, buf, offs, len); + return scan_read_oob(mtd, buf, offs, len); } /* Scan write data with oob to flash */ @@ -373,14 +375,14 @@ static u32 bbt_get_ver_offs(struct mtd_info *mtd, struct nand_bbt_descr *td) * Read the bad block table(s) for all chips starting at a given page. We * assume that the bbt bits are in consecutive order. */ -static int read_abs_bbts(struct mtd_info *mtd, uint8_t *buf, - struct nand_bbt_descr *td, struct nand_bbt_descr *md) +static void read_abs_bbts(struct mtd_info *mtd, uint8_t *buf, + struct nand_bbt_descr *td, struct nand_bbt_descr *md) { struct nand_chip *this = mtd->priv; /* Read the primary version, if available */ if (td->options & NAND_BBT_VERSION) { - scan_read_raw(mtd, buf, (loff_t)td->pages[0] << this->page_shift, + scan_read(mtd, buf, (loff_t)td->pages[0] << this->page_shift, mtd->writesize, td); td->version[0] = buf[bbt_get_ver_offs(mtd, td)]; pr_info("Bad block table at page %d, version 0x%02X\n", @@ -389,28 +391,27 @@ static int read_abs_bbts(struct mtd_info *mtd, uint8_t *buf, /* Read the mirror version, if available */ if (md && (md->options & NAND_BBT_VERSION)) { - scan_read_raw(mtd, buf, (loff_t)md->pages[0] << this->page_shift, - mtd->writesize, td); + scan_read(mtd, buf, (loff_t)md->pages[0] << this->page_shift, + mtd->writesize, md); md->version[0] = buf[bbt_get_ver_offs(mtd, md)]; pr_info("Bad block table at page %d, version 0x%02X\n", md->pages[0], md->version[0]); } - return 1; } /* Scan a given block full */ static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd, loff_t offs, uint8_t *buf, size_t readlen, - int scanlen, int len) + int scanlen, int numpages) { int ret, j; - ret = scan_read_raw_oob(mtd, buf, offs, readlen); + ret = scan_read_oob(mtd, buf, offs, readlen); /* Ignore ECC errors when checking for BBM */ if (ret && !mtd_is_bitflip_or_eccerr(ret)) return ret; - for (j = 0; j < len; j++, buf += scanlen) { + for (j = 0; j < numpages; j++, buf += scanlen) { if (check_pattern(buf, scanlen, mtd->writesize, bd)) return 1; } @@ -419,7 +420,7 @@ static int scan_block_full(struct mtd_info *mtd, struct nand_bbt_descr *bd, /* Scan a given block partially */ static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd, - loff_t offs, uint8_t *buf, int len) + loff_t offs, uint8_t *buf, int numpages) { struct mtd_oob_ops ops; int j, ret; @@ -430,7 +431,7 @@ static int scan_block_fast(struct mtd_info *mtd, struct nand_bbt_descr *bd, ops.datbuf = NULL; ops.mode = MTD_OPS_PLACE_OOB; - for (j = 0; j < len; j++) { + for (j = 0; j < numpages; j++) { /* * Read the full oob until read_oob is fixed to handle single * byte reads for 16 bit buswidth. @@ -463,7 +464,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd, int chip) { struct nand_chip *this = mtd->priv; - int i, numblocks, len, scanlen; + int i, numblocks, numpages, scanlen; int startblock; loff_t from; size_t readlen; @@ -471,11 +472,11 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, pr_info("Scanning device for bad blocks\n"); if (bd->options & NAND_BBT_SCANALLPAGES) - len = 1 << (this->bbt_erase_shift - this->page_shift); + numpages = 1 << (this->bbt_erase_shift - this->page_shift); else if (bd->options & NAND_BBT_SCAN2NDPAGE) - len = 2; + numpages = 2; else - len = 1; + numpages = 1; if (!(bd->options & NAND_BBT_SCANEMPTY)) { /* We need only read few bytes from the OOB area */ @@ -484,7 +485,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, } else { /* Full page content should be read */ scanlen = mtd->writesize + mtd->oobsize; - readlen = len * mtd->writesize; + readlen = numpages * mtd->writesize; } if (chip == -1) { @@ -508,7 +509,7 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, } if (this->bbt_options & NAND_BBT_SCANLASTPAGE) - from += mtd->erasesize - (mtd->writesize * len); + from += mtd->erasesize - (mtd->writesize * numpages); for (i = startblock; i < numblocks;) { int ret; @@ -517,9 +518,9 @@ static int create_bbt(struct mtd_info *mtd, uint8_t *buf, if (bd->options & NAND_BBT_SCANALLPAGES) ret = scan_block_full(mtd, bd, from, buf, readlen, - scanlen, len); + scanlen, numpages); else - ret = scan_block_fast(mtd, bd, from, buf, len); + ret = scan_block_fast(mtd, bd, from, buf, numpages); if (ret < 0) return ret; @@ -594,7 +595,7 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr loff_t offs = (loff_t)actblock << this->bbt_erase_shift; /* Read first page */ - scan_read_raw(mtd, buf, offs, mtd->writesize, td); + scan_read(mtd, buf, offs, mtd->writesize, td); if (!check_pattern(buf, scanlen, mtd->writesize, td)) { td->pages[i] = actblock << blocktopage; if (td->options & NAND_BBT_VERSION) { @@ -626,7 +627,9 @@ static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr * * Search and read the bad block table(s). */ -static int search_read_bbts(struct mtd_info *mtd, uint8_t * buf, struct nand_bbt_descr *td, struct nand_bbt_descr *md) +static void search_read_bbts(struct mtd_info *mtd, uint8_t *buf, + struct nand_bbt_descr *td, + struct nand_bbt_descr *md) { /* Search the primary table */ search_bbt(mtd, buf, td); @@ -634,9 +637,6 @@ static int search_read_bbts(struct mtd_info *mtd, uint8_t * buf, struct nand_bbt /* Search the mirror table */ if (md) search_bbt(mtd, buf, md); - - /* Force result check */ - return 1; } /** @@ -1162,14 +1162,13 @@ int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd) /* Is the bbt at a given page? */ if (td->options & NAND_BBT_ABSPAGE) { - res = read_abs_bbts(mtd, buf, td, md); + read_abs_bbts(mtd, buf, td, md); } else { /* Search the bad block table using a pattern in oob */ - res = search_read_bbts(mtd, buf, td, md); + search_read_bbts(mtd, buf, td, md); } - if (res) - res = check_create(mtd, buf, bd); + res = check_create(mtd, buf, bd); /* Prevent the bbt regions from erasing / writing */ mark_bbt_region(mtd, td); @@ -1260,7 +1259,7 @@ static struct nand_bbt_descr bbt_main_descr = { .offs = 8, .len = 4, .veroffs = 12, - .maxblocks = 4, + .maxblocks = NAND_BBT_SCAN_MAXBLOCKS, .pattern = bbt_pattern }; @@ -1270,27 +1269,27 @@ static struct nand_bbt_descr bbt_mirror_descr = { .offs = 8, .len = 4, .veroffs = 12, - .maxblocks = 4, + .maxblocks = NAND_BBT_SCAN_MAXBLOCKS, .pattern = mirror_pattern }; -static struct nand_bbt_descr bbt_main_no_bbt_descr = { +static struct nand_bbt_descr bbt_main_no_oob_descr = { .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP | NAND_BBT_NO_OOB, .len = 4, .veroffs = 4, - .maxblocks = 4, + .maxblocks = NAND_BBT_SCAN_MAXBLOCKS, .pattern = bbt_pattern }; -static struct nand_bbt_descr bbt_mirror_no_bbt_descr = { +static struct nand_bbt_descr bbt_mirror_no_oob_descr = { .options = NAND_BBT_LASTBLOCK | NAND_BBT_CREATE | NAND_BBT_WRITE | NAND_BBT_2BIT | NAND_BBT_VERSION | NAND_BBT_PERCHIP | NAND_BBT_NO_OOB, .len = 4, .veroffs = 4, - .maxblocks = 4, + .maxblocks = NAND_BBT_SCAN_MAXBLOCKS, .pattern = mirror_pattern }; @@ -1355,8 +1354,8 @@ int nand_default_bbt(struct mtd_info *mtd) /* Use the default pattern descriptors */ if (!this->bbt_td) { if (this->bbt_options & NAND_BBT_NO_OOB) { - this->bbt_td = &bbt_main_no_bbt_descr; - this->bbt_md = &bbt_mirror_no_bbt_descr; + this->bbt_td = &bbt_main_no_oob_descr; + this->bbt_md = &bbt_mirror_no_oob_descr; } else { this->bbt_td = &bbt_main_descr; this->bbt_md = &bbt_mirror_descr; @@ -1406,3 +1405,4 @@ int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt) EXPORT_SYMBOL(nand_scan_bbt); EXPORT_SYMBOL(nand_default_bbt); +EXPORT_SYMBOL_GPL(nand_update_bbt); diff --git a/drivers/mtd/nand/nand_bcm_umi.c b/drivers/mtd/nand/nand_bcm_umi.c deleted file mode 100644 index 46a6bc9..0000000 --- a/drivers/mtd/nand/nand_bcm_umi.c +++ /dev/null @@ -1,149 +0,0 @@ -/***************************************************************************** -* Copyright 2004 - 2009 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ - -/* ---- Include Files ---------------------------------------------------- */ -#include <mach/reg_umi.h> -#include "nand_bcm_umi.h" -#ifdef BOOT0_BUILD -#include <uart.h> -#endif - -/* ---- External Variable Declarations ----------------------------------- */ -/* ---- External Function Prototypes ------------------------------------- */ -/* ---- Public Variables ------------------------------------------------- */ -/* ---- Private Constants and Types -------------------------------------- */ -/* ---- Private Function Prototypes -------------------------------------- */ -/* ---- Private Variables ------------------------------------------------ */ -/* ---- Private Functions ------------------------------------------------ */ - -#if NAND_ECC_BCH -/**************************************************************************** -* nand_bch_ecc_flip_bit - Routine to flip an errored bit -* -* PURPOSE: -* This is a helper routine that flips the bit (0 -> 1 or 1 -> 0) of the -* errored bit specified -* -* PARAMETERS: -* datap - Container that holds the 512 byte data -* errorLocation - Location of the bit that needs to be flipped -* -* RETURNS: -* None -****************************************************************************/ -static void nand_bcm_umi_bch_ecc_flip_bit(uint8_t *datap, int errorLocation) -{ - int locWithinAByte = (errorLocation & REG_UMI_BCH_ERR_LOC_BYTE) >> 0; - int locWithinAWord = (errorLocation & REG_UMI_BCH_ERR_LOC_WORD) >> 3; - int locWithinAPage = (errorLocation & REG_UMI_BCH_ERR_LOC_PAGE) >> 5; - - uint8_t errorByte = 0; - uint8_t byteMask = 1 << locWithinAByte; - - /* BCH uses big endian, need to change the location - * bits to little endian */ - locWithinAWord = 3 - locWithinAWord; - - errorByte = datap[locWithinAPage * sizeof(uint32_t) + locWithinAWord]; - -#ifdef BOOT0_BUILD - puthexs("\nECC Correct Offset: ", - locWithinAPage * sizeof(uint32_t) + locWithinAWord); - puthexs(" errorByte:", errorByte); - puthex8(" Bit: ", locWithinAByte); -#endif - - if (errorByte & byteMask) { - /* bit needs to be cleared */ - errorByte &= ~byteMask; - } else { - /* bit needs to be set */ - errorByte |= byteMask; - } - - /* write back the value with the fixed bit */ - datap[locWithinAPage * sizeof(uint32_t) + locWithinAWord] = errorByte; -} - -/**************************************************************************** -* nand_correct_page_bch - Routine to correct bit errors when reading NAND -* -* PURPOSE: -* This routine reads the BCH registers to determine if there are any bit -* errors during the read of the last 512 bytes of data + ECC bytes. If -* errors exists, the routine fixes it. -* -* PARAMETERS: -* datap - Container that holds the 512 byte data -* -* RETURNS: -* 0 or greater = Number of errors corrected -* (No errors are found or errors have been fixed) -* -1 = Error(s) cannot be fixed -****************************************************************************/ -int nand_bcm_umi_bch_correct_page(uint8_t *datap, uint8_t *readEccData, - int numEccBytes) -{ - int numErrors; - int errorLocation; - int idx; - uint32_t regValue; - - /* wait for read ECC to be valid */ - regValue = nand_bcm_umi_bch_poll_read_ecc_calc(); - - /* - * read the control status register to determine if there - * are error'ed bits - * see if errors are correctible - */ - if ((regValue & REG_UMI_BCH_CTRL_STATUS_UNCORR_ERR) > 0) { - int i; - - for (i = 0; i < numEccBytes; i++) { - if (readEccData[i] != 0xff) { - /* errors cannot be fixed, return -1 */ - return -1; - } - } - /* If ECC is unprogrammed then we can't correct, - * assume everything OK */ - return 0; - } - - if ((regValue & REG_UMI_BCH_CTRL_STATUS_CORR_ERR) == 0) { - /* no errors */ - return 0; - } - - /* - * Fix errored bits by doing the following: - * 1. Read the number of errors in the control and status register - * 2. Read the error location registers that corresponds to the number - * of errors reported - * 3. Invert the bit in the data - */ - numErrors = (regValue & REG_UMI_BCH_CTRL_STATUS_NB_CORR_ERROR) >> 20; - - for (idx = 0; idx < numErrors; idx++) { - errorLocation = - REG_UMI_BCH_ERR_LOC_ADDR(idx) & REG_UMI_BCH_ERR_LOC_MASK; - - /* Flip bit */ - nand_bcm_umi_bch_ecc_flip_bit(datap, errorLocation); - } - /* Errors corrected */ - return numErrors; -} -#endif diff --git a/drivers/mtd/nand/nand_bcm_umi.h b/drivers/mtd/nand/nand_bcm_umi.h deleted file mode 100644 index d901866..0000000 --- a/drivers/mtd/nand/nand_bcm_umi.h +++ /dev/null @@ -1,336 +0,0 @@ -/***************************************************************************** -* Copyright 2003 - 2009 Broadcom Corporation. All rights reserved. -* -* Unless you and Broadcom execute a separate written software license -* agreement governing use of this software, this software is licensed to you -* under the terms of the GNU General Public License version 2, available at -* http://www.broadcom.com/licenses/GPLv2.php (the "GPL"). -* -* Notwithstanding the above, under no circumstances may you combine this -* software in any way with any other Broadcom software provided under a -* license other than the GPL, without Broadcom's express prior written -* consent. -*****************************************************************************/ -#ifndef NAND_BCM_UMI_H -#define NAND_BCM_UMI_H - -/* ---- Include Files ---------------------------------------------------- */ -#include <mach/reg_umi.h> -#include <mach/reg_nand.h> -#include <mach/cfg_global.h> - -/* ---- Constants and Types ---------------------------------------------- */ -#if (CFG_GLOBAL_CHIP_FAMILY == CFG_GLOBAL_CHIP_FAMILY_BCMRING) -#define NAND_ECC_BCH (CFG_GLOBAL_CHIP_REV > 0xA0) -#else -#define NAND_ECC_BCH 0 -#endif - -#define CFG_GLOBAL_NAND_ECC_BCH_NUM_BYTES 13 - -#if NAND_ECC_BCH -#ifdef BOOT0_BUILD -#define NAND_ECC_NUM_BYTES 13 -#else -#define NAND_ECC_NUM_BYTES CFG_GLOBAL_NAND_ECC_BCH_NUM_BYTES -#endif -#else -#define NAND_ECC_NUM_BYTES 3 -#endif - -#define NAND_DATA_ACCESS_SIZE 512 - -/* ---- Variable Externs ------------------------------------------ */ -/* ---- Function Prototypes --------------------------------------- */ -int nand_bcm_umi_bch_correct_page(uint8_t *datap, uint8_t *readEccData, - int numEccBytes); - -/* Check in device is ready */ -static inline int nand_bcm_umi_dev_ready(void) -{ - return readl(®_UMI_NAND_RCSR) & REG_UMI_NAND_RCSR_RDY; -} - -/* Wait until device is ready */ -static inline void nand_bcm_umi_wait_till_ready(void) -{ - while (nand_bcm_umi_dev_ready() == 0) - ; -} - -/* Enable Hamming ECC */ -static inline void nand_bcm_umi_hamming_enable_hwecc(void) -{ - /* disable and reset ECC, 512 byte page */ - writel(readl(®_UMI_NAND_ECC_CSR) & ~(REG_UMI_NAND_ECC_CSR_ECC_ENABLE | - REG_UMI_NAND_ECC_CSR_256BYTE), ®_UMI_NAND_ECC_CSR); - /* enable ECC */ - writel(readl(®_UMI_NAND_ECC_CSR) | REG_UMI_NAND_ECC_CSR_ECC_ENABLE, - ®_UMI_NAND_ECC_CSR); -} - -#if NAND_ECC_BCH -/* BCH ECC specifics */ -#define ECC_BITS_PER_CORRECTABLE_BIT 13 - -/* Enable BCH Read ECC */ -static inline void nand_bcm_umi_bch_enable_read_hwecc(void) -{ - /* disable and reset ECC */ - writel(REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID, ®_UMI_BCH_CTRL_STATUS); - /* Turn on ECC */ - writel(REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN, ®_UMI_BCH_CTRL_STATUS); -} - -/* Enable BCH Write ECC */ -static inline void nand_bcm_umi_bch_enable_write_hwecc(void) -{ - /* disable and reset ECC */ - writel(REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID, ®_UMI_BCH_CTRL_STATUS); - /* Turn on ECC */ - writel(REG_UMI_BCH_CTRL_STATUS_ECC_WR_EN, ®_UMI_BCH_CTRL_STATUS); -} - -/* Config number of BCH ECC bytes */ -static inline void nand_bcm_umi_bch_config_ecc(uint8_t numEccBytes) -{ - uint32_t nValue; - uint32_t tValue; - uint32_t kValue; - uint32_t numBits = numEccBytes * 8; - - /* disable and reset ECC */ - writel(REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID | - REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID, - ®_UMI_BCH_CTRL_STATUS); - - /* Every correctible bit requires 13 ECC bits */ - tValue = (uint32_t) (numBits / ECC_BITS_PER_CORRECTABLE_BIT); - - /* Total data in number of bits for generating and computing BCH ECC */ - nValue = (NAND_DATA_ACCESS_SIZE + numEccBytes) * 8; - - /* K parameter is used internally. K = N - (T * 13) */ - kValue = nValue - (tValue * ECC_BITS_PER_CORRECTABLE_BIT); - - /* Write the settings */ - writel(nValue, ®_UMI_BCH_N); - writel(tValue, ®_UMI_BCH_T); - writel(kValue, ®_UMI_BCH_K); -} - -/* Pause during ECC read calculation to skip bytes in OOB */ -static inline void nand_bcm_umi_bch_pause_read_ecc_calc(void) -{ - writel(REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN | REG_UMI_BCH_CTRL_STATUS_PAUSE_ECC_DEC, ®_UMI_BCH_CTRL_STATUS); -} - -/* Resume during ECC read calculation after skipping bytes in OOB */ -static inline void nand_bcm_umi_bch_resume_read_ecc_calc(void) -{ - writel(REG_UMI_BCH_CTRL_STATUS_ECC_RD_EN, ®_UMI_BCH_CTRL_STATUS); -} - -/* Poll read ECC calc to check when hardware completes */ -static inline uint32_t nand_bcm_umi_bch_poll_read_ecc_calc(void) -{ - uint32_t regVal; - - do { - /* wait for ECC to be valid */ - regVal = readl(®_UMI_BCH_CTRL_STATUS); - } while ((regVal & REG_UMI_BCH_CTRL_STATUS_RD_ECC_VALID) == 0); - - return regVal; -} - -/* Poll write ECC calc to check when hardware completes */ -static inline void nand_bcm_umi_bch_poll_write_ecc_calc(void) -{ - /* wait for ECC to be valid */ - while ((readl(®_UMI_BCH_CTRL_STATUS) & REG_UMI_BCH_CTRL_STATUS_WR_ECC_VALID) - == 0) - ; -} - -/* Read the OOB and ECC, for kernel write OOB to a buffer */ -#if defined(__KERNEL__) && !defined(STANDALONE) -static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize, - uint8_t *eccCalc, int numEccBytes, uint8_t *oobp) -#else -static inline void nand_bcm_umi_bch_read_oobEcc(uint32_t pageSize, - uint8_t *eccCalc, int numEccBytes) -#endif -{ - int eccPos = 0; - int numToRead = 16; /* There are 16 bytes per sector in the OOB */ - - /* ECC is already paused when this function is called */ - if (pageSize != NAND_DATA_ACCESS_SIZE) { - /* skip BI */ -#if defined(__KERNEL__) && !defined(STANDALONE) - *oobp++ = readb(®_NAND_DATA8); -#else - readb(®_NAND_DATA8); -#endif - numToRead--; - } - - while (numToRead > numEccBytes) { - /* skip free oob region */ -#if defined(__KERNEL__) && !defined(STANDALONE) - *oobp++ = readb(®_NAND_DATA8); -#else - readb(®_NAND_DATA8); -#endif - numToRead--; - } - - if (pageSize == NAND_DATA_ACCESS_SIZE) { - /* read ECC bytes before BI */ - nand_bcm_umi_bch_resume_read_ecc_calc(); - - while (numToRead > 11) { -#if defined(__KERNEL__) && !defined(STANDALONE) - *oobp = readb(®_NAND_DATA8); - eccCalc[eccPos++] = *oobp; - oobp++; -#else - eccCalc[eccPos++] = readb(®_NAND_DATA8); -#endif - numToRead--; - } - - nand_bcm_umi_bch_pause_read_ecc_calc(); - - if (numToRead == 11) { - /* read BI */ -#if defined(__KERNEL__) && !defined(STANDALONE) - *oobp++ = readb(®_NAND_DATA8); -#else - readb(®_NAND_DATA8); -#endif - numToRead--; - } - - } - /* read ECC bytes */ - nand_bcm_umi_bch_resume_read_ecc_calc(); - while (numToRead) { -#if defined(__KERNEL__) && !defined(STANDALONE) - *oobp = readb(®_NAND_DATA8); - eccCalc[eccPos++] = *oobp; - oobp++; -#else - eccCalc[eccPos++] = readb(®_NAND_DATA8); -#endif - numToRead--; - } -} - -/* Helper function to write ECC */ -static inline void NAND_BCM_UMI_ECC_WRITE(int numEccBytes, int eccBytePos, - uint8_t *oobp, uint8_t eccVal) -{ - if (eccBytePos <= numEccBytes) - *oobp = eccVal; -} - -/* Write OOB with ECC */ -static inline void nand_bcm_umi_bch_write_oobEcc(uint32_t pageSize, - uint8_t *oobp, int numEccBytes) -{ - uint32_t eccVal = 0xffffffff; - - /* wait for write ECC to be valid */ - nand_bcm_umi_bch_poll_write_ecc_calc(); - - /* - ** Get the hardware ecc from the 32-bit result registers. - ** Read after 512 byte accesses. Format B3B2B1B0 - ** where B3 = ecc3, etc. - */ - - if (pageSize == NAND_DATA_ACCESS_SIZE) { - /* Now fill in the ECC bytes */ - if (numEccBytes >= 13) - eccVal = readl(®_UMI_BCH_WR_ECC_3); - - /* Usually we skip CM in oob[0,1] */ - NAND_BCM_UMI_ECC_WRITE(numEccBytes, 15, &oobp[0], - (eccVal >> 16) & 0xff); - NAND_BCM_UMI_ECC_WRITE(numEccBytes, 14, &oobp[1], - (eccVal >> 8) & 0xff); - - /* Write ECC in oob[2,3,4] */ - NAND_BCM_UMI_ECC_WRITE(numEccBytes, 13, &oobp[2], - eccVal & 0xff); /* ECC 12 */ - - if (numEccBytes >= 9) - eccVal = readl(®_UMI_BCH_WR_ECC_2); - - NAND_BCM_UMI_ECC_WRITE(numEccBytes, 12, &oobp[3], - (eccVal >> 24) & 0xff); /* ECC11 */ - NAND_BCM_UMI_ECC_WRITE(numEccBytes, 11, &oobp[4], - (eccVal >> 16) & 0xff); /* ECC10 */ - - /* Always Skip BI in oob[5] */ - } else { - /* Always Skip BI in oob[0] */ - - /* Now fill in the ECC bytes */ - if (numEccBytes >= 13) - eccVal = readl(®_UMI_BCH_WR_ECC_3); - - /* Usually skip CM in oob[1,2] */ - NAND_BCM_UMI_ECC_WRITE(numEccBytes, 15, &oobp[1], - (eccVal >> 16) & 0xff); - NAND_BCM_UMI_ECC_WRITE(numEccBytes, 14, &oobp[2], - (eccVal >> 8) & 0xff); - - /* Write ECC in oob[3-15] */ - NAND_BCM_UMI_ECC_WRITE(numEccBytes, 13, &oobp[3], - eccVal & 0xff); /* ECC12 */ - - if (numEccBytes >= 9) - eccVal = readl(®_UMI_BCH_WR_ECC_2); - - NAND_BCM_UMI_ECC_WRITE(numEccBytes, 12, &oobp[4], - (eccVal >> 24) & 0xff); /* ECC11 */ - NAND_BCM_UMI_ECC_WRITE(numEccBytes, 11, &oobp[5], - (eccVal >> 16) & 0xff); /* ECC10 */ - } - - /* Fill in the remainder of ECC locations */ - NAND_BCM_UMI_ECC_WRITE(numEccBytes, 10, &oobp[6], - (eccVal >> 8) & 0xff); /* ECC9 */ - NAND_BCM_UMI_ECC_WRITE(numEccBytes, 9, &oobp[7], - eccVal & 0xff); /* ECC8 */ - - if (numEccBytes >= 5) - eccVal = readl(®_UMI_BCH_WR_ECC_1); - - NAND_BCM_UMI_ECC_WRITE(numEccBytes, 8, &oobp[8], - (eccVal >> 24) & 0xff); /* ECC7 */ - NAND_BCM_UMI_ECC_WRITE(numEccBytes, 7, &oobp[9], - (eccVal >> 16) & 0xff); /* ECC6 */ - NAND_BCM_UMI_ECC_WRITE(numEccBytes, 6, &oobp[10], - (eccVal >> 8) & 0xff); /* ECC5 */ - NAND_BCM_UMI_ECC_WRITE(numEccBytes, 5, &oobp[11], - eccVal & 0xff); /* ECC4 */ - - if (numEccBytes >= 1) - eccVal = readl(®_UMI_BCH_WR_ECC_0); - - NAND_BCM_UMI_ECC_WRITE(numEccBytes, 4, &oobp[12], - (eccVal >> 24) & 0xff); /* ECC3 */ - NAND_BCM_UMI_ECC_WRITE(numEccBytes, 3, &oobp[13], - (eccVal >> 16) & 0xff); /* ECC2 */ - NAND_BCM_UMI_ECC_WRITE(numEccBytes, 2, &oobp[14], - (eccVal >> 8) & 0xff); /* ECC1 */ - NAND_BCM_UMI_ECC_WRITE(numEccBytes, 1, &oobp[15], - eccVal & 0xff); /* ECC0 */ -} -#endif - -#endif /* NAND_BCM_UMI_H */ diff --git a/drivers/mtd/nand/nand_ids.c b/drivers/mtd/nand/nand_ids.c index 621b70b..e3aa274 100644 --- a/drivers/mtd/nand/nand_ids.c +++ b/drivers/mtd/nand/nand_ids.c @@ -70,7 +70,7 @@ struct nand_flash_dev nand_flash_ids[] = { * These are the new chips with large page size. The pagesize and the * erasesize is determined from the extended id bytes */ -#define LP_OPTIONS (NAND_SAMSUNG_LP_OPTIONS | NAND_NO_READRDY) +#define LP_OPTIONS NAND_SAMSUNG_LP_OPTIONS #define LP_OPTIONS16 (LP_OPTIONS | NAND_BUSWIDTH_16) /* 512 Megabit */ @@ -157,7 +157,7 @@ struct nand_flash_dev nand_flash_ids[] = { * writes possible, but not implemented now */ {"AND 128MiB 3,3V 8-bit", 0x01, 2048, 128, 0x4000, - NAND_IS_AND | NAND_NO_READRDY | NAND_4PAGE_ARRAY | BBT_AUTO_REFRESH}, + NAND_IS_AND | NAND_4PAGE_ARRAY | BBT_AUTO_REFRESH}, {NULL,} }; @@ -174,8 +174,9 @@ struct nand_manufacturers nand_manuf_ids[] = { {NAND_MFR_STMICRO, "ST Micro"}, {NAND_MFR_HYNIX, "Hynix"}, {NAND_MFR_MICRON, "Micron"}, - {NAND_MFR_AMD, "AMD"}, + {NAND_MFR_AMD, "AMD/Spansion"}, {NAND_MFR_MACRONIX, "Macronix"}, + {NAND_MFR_EON, "Eon"}, {0x0, "Unknown"} }; diff --git a/drivers/mtd/nand/nandsim.c b/drivers/mtd/nand/nandsim.c index cf0cd31..a932c48 100644 --- a/drivers/mtd/nand/nandsim.c +++ b/drivers/mtd/nand/nandsim.c @@ -447,8 +447,6 @@ static unsigned int rptwear_cnt = 0; /* MTD structure for NAND controller */ static struct mtd_info *nsmtd; -static u_char ns_verify_buf[NS_LARGEST_PAGE_SIZE]; - /* * Allocate array of page pointers, create slab allocation for an array * and initialize the array by NULL pointers. @@ -2189,19 +2187,6 @@ static void ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) return; } -static int ns_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) -{ - ns_nand_read_buf(mtd, (u_char *)&ns_verify_buf[0], len); - - if (!memcmp(buf, &ns_verify_buf[0], len)) { - NS_DBG("verify_buf: the buffer is OK\n"); - return 0; - } else { - NS_DBG("verify_buf: the buffer is wrong\n"); - return -EFAULT; - } -} - /* * Module initialization function */ @@ -2236,7 +2221,6 @@ static int __init ns_init_module(void) chip->dev_ready = ns_device_ready; chip->write_buf = ns_nand_write_buf; chip->read_buf = ns_nand_read_buf; - chip->verify_buf = ns_nand_verify_buf; chip->read_word = ns_nand_read_word; chip->ecc.mode = NAND_ECC_SOFT; /* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */ @@ -2333,6 +2317,7 @@ static int __init ns_init_module(void) uint64_t new_size = (uint64_t)nsmtd->erasesize << overridesize; if (new_size >> overridesize != nsmtd->erasesize) { NS_ERR("overridesize is too big\n"); + retval = -EINVAL; goto err_exit; } /* N.B. This relies on nand_scan not doing anything with the size before we change it */ diff --git a/drivers/mtd/nand/ndfc.c b/drivers/mtd/nand/ndfc.c index 2b6f632..5fd3f01 100644 --- a/drivers/mtd/nand/ndfc.c +++ b/drivers/mtd/nand/ndfc.c @@ -140,18 +140,6 @@ static void ndfc_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) out_be32(ndfc->ndfcbase + NDFC_DATA, *p++); } -static int ndfc_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len) -{ - struct nand_chip *chip = mtd->priv; - struct ndfc_controller *ndfc = chip->priv; - uint32_t *p = (uint32_t *) buf; - - for(;len > 0; len -= 4) - if (*p++ != in_be32(ndfc->ndfcbase + NDFC_DATA)) - return -EFAULT; - return 0; -} - /* * Initialize chip structure */ @@ -172,7 +160,6 @@ static int ndfc_chip_init(struct ndfc_controller *ndfc, chip->controller = &ndfc->ndfc_control; chip->read_buf = ndfc_read_buf; chip->write_buf = ndfc_write_buf; - chip->verify_buf = ndfc_verify_buf; chip->ecc.correct = nand_correct_data; chip->ecc.hwctl = ndfc_enable_hwecc; chip->ecc.calculate = ndfc_calculate_ecc; diff --git a/drivers/mtd/nand/nuc900_nand.c b/drivers/mtd/nand/nuc900_nand.c index 8febe46..94dc46b 100644 --- a/drivers/mtd/nand/nuc900_nand.c +++ b/drivers/mtd/nand/nuc900_nand.c @@ -112,22 +112,6 @@ static void nuc900_nand_write_buf(struct mtd_info *mtd, write_data_reg(nand, buf[i]); } -static int nuc900_verify_buf(struct mtd_info *mtd, - const unsigned char *buf, int len) -{ - int i; - struct nuc900_nand *nand; - - nand = container_of(mtd, struct nuc900_nand, mtd); - - for (i = 0; i < len; i++) { - if (buf[i] != (unsigned char)read_data_reg(nand)) - return -EFAULT; - } - - return 0; -} - static int nuc900_check_rb(struct nuc900_nand *nand) { unsigned int val; @@ -292,7 +276,6 @@ static int __devinit nuc900_nand_probe(struct platform_device *pdev) chip->read_byte = nuc900_nand_read_byte; chip->write_buf = nuc900_nand_write_buf; chip->read_buf = nuc900_nand_read_buf; - chip->verify_buf = nuc900_verify_buf; chip->chip_delay = 50; chip->options = 0; chip->ecc.mode = NAND_ECC_SOFT; diff --git a/drivers/mtd/nand/omap2.c b/drivers/mtd/nand/omap2.c index fc81112..5b31386 100644 --- a/drivers/mtd/nand/omap2.c +++ b/drivers/mtd/nand/omap2.c @@ -425,7 +425,7 @@ static void omap_nand_dma_callback(void *data) } /* - * omap_nand_dma_transfer: configer and start dma transfer + * omap_nand_dma_transfer: configure and start dma transfer * @mtd: MTD device structure * @addr: virtual address in RAM of source/destination * @len: number of data bytes to be transferred @@ -546,7 +546,7 @@ static void omap_write_buf_dma_pref(struct mtd_info *mtd, } /* - * omap_nand_irq - GMPC irq handler + * omap_nand_irq - GPMC irq handler * @this_irq: gpmc irq number * @dev: omap_nand_info structure pointer is passed here */ @@ -698,27 +698,6 @@ out_copy: } /** - * omap_verify_buf - Verify chip data against buffer - * @mtd: MTD device structure - * @buf: buffer containing the data to compare - * @len: number of bytes to compare - */ -static int omap_verify_buf(struct mtd_info *mtd, const u_char * buf, int len) -{ - struct omap_nand_info *info = container_of(mtd, struct omap_nand_info, - mtd); - u16 *p = (u16 *) buf; - - len >>= 1; - while (len--) { - if (*p++ != cpu_to_le16(readw(info->nand.IO_ADDR_R))) - return -EFAULT; - } - - return 0; -} - -/** * gen_true_ecc - This function will generate true ECC value * @ecc_buf: buffer to store ecc code * @@ -1326,8 +1305,8 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) /* * If RDY/BSY line is connected to OMAP then use the omap ready - * funcrtion and the generic nand_wait function which reads the status - * register after monitoring the RDY/BSY line.Otherwise use a standard + * function and the generic nand_wait function which reads the status + * register after monitoring the RDY/BSY line. Otherwise use a standard * chip delay which is slightly more than tR (AC Timing) of the NAND * device and read status register until you get a failure or success */ @@ -1428,9 +1407,7 @@ static int __devinit omap_nand_probe(struct platform_device *pdev) goto out_release_mem_region; } - info->nand.verify_buf = omap_verify_buf; - - /* selsect the ecc type */ + /* select the ecc type */ if (pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_DEFAULT) info->nand.ecc.mode = NAND_ECC_SOFT; else if ((pdata->ecc_opt == OMAP_ECC_HAMMING_CODE_HW) || @@ -1536,7 +1513,8 @@ static int omap_nand_remove(struct platform_device *pdev) /* Release NAND device, its internal structures and partitions */ nand_release(&info->mtd); iounmap(info->nand.IO_ADDR_R); - kfree(&info->mtd); + release_mem_region(info->phys_base, NAND_IO_SIZE); + kfree(info); return 0; } diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c index 131b58a..aefaf8c 100644 --- a/drivers/mtd/nand/orion_nand.c +++ b/drivers/mtd/nand/orion_nand.c @@ -21,7 +21,6 @@ #include <linux/err.h> #include <asm/io.h> #include <asm/sizes.h> -#include <mach/hardware.h> #include <linux/platform_data/mtd-orion_nand.h> static void orion_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) diff --git a/drivers/mtd/nand/plat_nand.c b/drivers/mtd/nand/plat_nand.c index 1bcb520..a47ee68 100644 --- a/drivers/mtd/nand/plat_nand.c +++ b/drivers/mtd/nand/plat_nand.c @@ -37,6 +37,11 @@ static int __devinit plat_nand_probe(struct platform_device *pdev) const char **part_types; int err = 0; + if (!pdata) { + dev_err(&pdev->dev, "platform_nand_data is missing\n"); + return -EINVAL; + } + if (pdata->chip.nr_chips < 1) { dev_err(&pdev->dev, "invalid number of chips specified\n"); return -EINVAL; diff --git a/drivers/mtd/nand/pxa3xx_nand.c b/drivers/mtd/nand/pxa3xx_nand.c index c452271..37ee75c 100644 --- a/drivers/mtd/nand/pxa3xx_nand.c +++ b/drivers/mtd/nand/pxa3xx_nand.c @@ -683,11 +683,13 @@ static void pxa3xx_nand_cmdfunc(struct mtd_info *mtd, unsigned command, info->state = STATE_IDLE; } -static void pxa3xx_nand_write_page_hwecc(struct mtd_info *mtd, +static int pxa3xx_nand_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required) { chip->write_buf(mtd, buf, mtd->writesize); chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); + + return 0; } static int pxa3xx_nand_read_page_hwecc(struct mtd_info *mtd, @@ -771,12 +773,6 @@ static void pxa3xx_nand_write_buf(struct mtd_info *mtd, info->buf_start += real_len; } -static int pxa3xx_nand_verify_buf(struct mtd_info *mtd, - const uint8_t *buf, int len) -{ - return 0; -} - static void pxa3xx_nand_select_chip(struct mtd_info *mtd, int chip) { return; @@ -1007,7 +1003,6 @@ KEEP_CONFIG: chip->ecc.size = host->page_size; chip->ecc.strength = 1; - chip->options |= NAND_NO_READRDY; if (host->reg_ndcr & NDCR_DWIDTH_M) chip->options |= NAND_BUSWIDTH_16; @@ -1070,7 +1065,6 @@ static int alloc_nand_resource(struct platform_device *pdev) chip->read_byte = pxa3xx_nand_read_byte; chip->read_buf = pxa3xx_nand_read_buf; chip->write_buf = pxa3xx_nand_write_buf; - chip->verify_buf = pxa3xx_nand_verify_buf; } spin_lock_init(&chip->controller->lock); diff --git a/drivers/mtd/nand/r852.c b/drivers/mtd/nand/r852.c index 8cb6277..4495f85 100644 --- a/drivers/mtd/nand/r852.c +++ b/drivers/mtd/nand/r852.c @@ -309,27 +309,6 @@ static uint8_t r852_read_byte(struct mtd_info *mtd) return r852_read_reg(dev, R852_DATALINE); } - -/* - * Readback the buffer to verify it - */ -int r852_verify_buf(struct mtd_info *mtd, const uint8_t *buf, int len) -{ - struct r852_device *dev = r852_get_dev(mtd); - - /* We can't be sure about anything here... */ - if (dev->card_unstable) - return -1; - - /* This will never happen, unless you wired up a nand chip - with > 512 bytes page size to the reader */ - if (len > SM_SECTOR_SIZE) - return 0; - - r852_read_buf(mtd, dev->tmp_buffer, len); - return memcmp(buf, dev->tmp_buffer, len); -} - /* * Control several chip lines & send commands */ @@ -882,7 +861,6 @@ int r852_probe(struct pci_dev *pci_dev, const struct pci_device_id *id) chip->read_byte = r852_read_byte; chip->read_buf = r852_read_buf; chip->write_buf = r852_write_buf; - chip->verify_buf = r852_verify_buf; /* ecc */ chip->ecc.mode = NAND_ECC_HW_SYNDROME; diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index d804061..295e4be 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -21,6 +21,8 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ +#define pr_fmt(fmt) "nand-s3c2410: " fmt + #ifdef CONFIG_MTD_NAND_S3C2410_DEBUG #define DEBUG #endif @@ -30,6 +32,7 @@ #include <linux/init.h> #include <linux/kernel.h> #include <linux/string.h> +#include <linux/io.h> #include <linux/ioport.h> #include <linux/platform_device.h> #include <linux/delay.h> @@ -43,24 +46,9 @@ #include <linux/mtd/nand_ecc.h> #include <linux/mtd/partitions.h> -#include <asm/io.h> - #include <plat/regs-nand.h> #include <linux/platform_data/mtd-nand-s3c2410.h> -#ifdef CONFIG_MTD_NAND_S3C2410_HWECC -static int hardware_ecc = 1; -#else -static int hardware_ecc = 0; -#endif - -#ifdef CONFIG_MTD_NAND_S3C2410_CLKSTOP -static const int clock_stop = 1; -#else -static const int clock_stop = 0; -#endif - - /* new oob placement block for use with hardware ecc generation */ @@ -109,9 +97,8 @@ enum s3c_nand_clk_state { * @mtds: An array of MTD instances on this controoler. * @platform: The platform data for this board. * @device: The platform device we bound to. - * @area: The IO area resource that came from request_mem_region(). * @clk: The clock resource for this controller. - * @regs: The area mapped for the hardware registers described by @area. + * @regs: The area mapped for the hardware registers. * @sel_reg: Pointer to the register controlling the NAND selection. * @sel_bit: The bit in @sel_reg to select the NAND chip. * @mtd_count: The number of MTDs created from this controller. @@ -128,7 +115,6 @@ struct s3c2410_nand_info { /* device info */ struct device *device; - struct resource *area; struct clk *clk; void __iomem *regs; void __iomem *sel_reg; @@ -169,7 +155,11 @@ static struct s3c2410_platform_nand *to_nand_plat(struct platform_device *dev) static inline int allow_clk_suspend(struct s3c2410_nand_info *info) { - return clock_stop; +#ifdef CONFIG_MTD_NAND_S3C2410_CLKSTOP + return 1; +#else + return 0; +#endif } /** @@ -215,7 +205,8 @@ static int s3c_nand_calc_rate(int wanted, unsigned long clk, int max) pr_debug("result %d from %ld, %d\n", result, clk, wanted); if (result > max) { - printk("%d ns is too big for current clock rate %ld\n", wanted, clk); + pr_err("%d ns is too big for current clock rate %ld\n", + wanted, clk); return -1; } @@ -225,7 +216,7 @@ static int s3c_nand_calc_rate(int wanted, unsigned long clk, int max) return result; } -#define to_ns(ticks,clk) (((ticks) * NS_IN_KHZ) / (unsigned int)(clk)) +#define to_ns(ticks, clk) (((ticks) * NS_IN_KHZ) / (unsigned int)(clk)) /* controller setup */ @@ -268,7 +259,8 @@ static int s3c2410_nand_setrate(struct s3c2410_nand_info *info) } dev_info(info->device, "Tacls=%d, %dns Twrph0=%d %dns, Twrph1=%d %dns\n", - tacls, to_ns(tacls, clkrate), twrph0, to_ns(twrph0, clkrate), twrph1, to_ns(twrph1, clkrate)); + tacls, to_ns(tacls, clkrate), twrph0, to_ns(twrph0, clkrate), + twrph1, to_ns(twrph1, clkrate)); switch (info->cpu_type) { case TYPE_S3C2410: @@ -325,13 +317,13 @@ static int s3c2410_nand_inithw(struct s3c2410_nand_info *info) if (ret < 0) return ret; - switch (info->cpu_type) { - case TYPE_S3C2410: + switch (info->cpu_type) { + case TYPE_S3C2410: default: break; - case TYPE_S3C2440: - case TYPE_S3C2412: + case TYPE_S3C2440: + case TYPE_S3C2412: /* enable the controller and de-assert nFCE */ writel(S3C2440_NFCONT_ENABLE, info->regs + S3C2440_NFCONT); @@ -450,6 +442,7 @@ static int s3c2412_nand_devready(struct mtd_info *mtd) /* ECC handling functions */ +#ifdef CONFIG_MTD_NAND_S3C2410_HWECC static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat, u_char *read_ecc, u_char *calc_ecc) { @@ -463,10 +456,8 @@ static int s3c2410_nand_correct_data(struct mtd_info *mtd, u_char *dat, diff1 = read_ecc[1] ^ calc_ecc[1]; diff2 = read_ecc[2] ^ calc_ecc[2]; - pr_debug("%s: rd %02x%02x%02x calc %02x%02x%02x diff %02x%02x%02x\n", - __func__, - read_ecc[0], read_ecc[1], read_ecc[2], - calc_ecc[0], calc_ecc[1], calc_ecc[2], + pr_debug("%s: rd %*phN calc %*phN diff %02x%02x%02x\n", + __func__, 3, read_ecc, 3, calc_ecc, diff0, diff1, diff2); if (diff0 == 0 && diff1 == 0 && diff2 == 0) @@ -546,7 +537,8 @@ static void s3c2412_nand_enable_hwecc(struct mtd_info *mtd, int mode) unsigned long ctrl; ctrl = readl(info->regs + S3C2440_NFCONT); - writel(ctrl | S3C2412_NFCONT_INIT_MAIN_ECC, info->regs + S3C2440_NFCONT); + writel(ctrl | S3C2412_NFCONT_INIT_MAIN_ECC, + info->regs + S3C2440_NFCONT); } static void s3c2440_nand_enable_hwecc(struct mtd_info *mtd, int mode) @@ -558,7 +550,8 @@ static void s3c2440_nand_enable_hwecc(struct mtd_info *mtd, int mode) writel(ctrl | S3C2440_NFCONT_INITECC, info->regs + S3C2440_NFCONT); } -static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) +static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, + u_char *ecc_code) { struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); @@ -566,13 +559,13 @@ static int s3c2410_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u ecc_code[1] = readb(info->regs + S3C2410_NFECC + 1); ecc_code[2] = readb(info->regs + S3C2410_NFECC + 2); - pr_debug("%s: returning ecc %02x%02x%02x\n", __func__, - ecc_code[0], ecc_code[1], ecc_code[2]); + pr_debug("%s: returning ecc %*phN\n", __func__, 3, ecc_code); return 0; } -static int s3c2412_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) +static int s3c2412_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, + u_char *ecc_code) { struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); unsigned long ecc = readl(info->regs + S3C2412_NFMECC0); @@ -581,12 +574,13 @@ static int s3c2412_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u ecc_code[1] = ecc >> 8; ecc_code[2] = ecc >> 16; - pr_debug("calculate_ecc: returning ecc %02x,%02x,%02x\n", ecc_code[0], ecc_code[1], ecc_code[2]); + pr_debug("%s: returning ecc %*phN\n", __func__, 3, ecc_code); return 0; } -static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u_char *ecc_code) +static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, + u_char *ecc_code) { struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); unsigned long ecc = readl(info->regs + S3C2440_NFMECC0); @@ -599,6 +593,7 @@ static int s3c2440_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat, u return 0; } +#endif /* over-ride the standard functions for a little more speed. We can * use read/write block to move the data buffers to/from the controller @@ -625,13 +620,15 @@ static void s3c2440_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) } } -static void s3c2410_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) +static void s3c2410_nand_write_buf(struct mtd_info *mtd, const u_char *buf, + int len) { struct nand_chip *this = mtd->priv; writesb(this->IO_ADDR_W, buf, len); } -static void s3c2440_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len) +static void s3c2440_nand_write_buf(struct mtd_info *mtd, const u_char *buf, + int len) { struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd); @@ -675,7 +672,8 @@ static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info) CPUFREQ_TRANSITION_NOTIFIER); } -static inline void s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info) +static inline void +s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info) { cpufreq_unregister_notifier(&info->freq_transition, CPUFREQ_TRANSITION_NOTIFIER); @@ -687,7 +685,8 @@ static inline int s3c2410_nand_cpufreq_register(struct s3c2410_nand_info *info) return 0; } -static inline void s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info) +static inline void +s3c2410_nand_cpufreq_deregister(struct s3c2410_nand_info *info) { } #endif @@ -717,29 +716,12 @@ static int s3c24xx_nand_remove(struct platform_device *pdev) pr_debug("releasing mtd %d (%p)\n", mtdno, ptr); nand_release(&ptr->mtd); } - - kfree(info->mtds); } /* free the common resources */ - if (!IS_ERR(info->clk)) { + if (!IS_ERR(info->clk)) s3c2410_nand_clk_set_state(info, CLOCK_DISABLE); - clk_put(info->clk); - } - - if (info->regs != NULL) { - iounmap(info->regs); - info->regs = NULL; - } - - if (info->area != NULL) { - release_resource(info->area); - kfree(info->area); - info->area = NULL; - } - - kfree(info); return 0; } @@ -810,7 +792,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, dev_info(info->device, "System booted from NAND\n"); break; - } + } chip->IO_ADDR_R = chip->IO_ADDR_W; @@ -819,32 +801,31 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info, nmtd->mtd.owner = THIS_MODULE; nmtd->set = set; - if (hardware_ecc) { +#ifdef CONFIG_MTD_NAND_S3C2410_HWECC + chip->ecc.calculate = s3c2410_nand_calculate_ecc; + chip->ecc.correct = s3c2410_nand_correct_data; + chip->ecc.mode = NAND_ECC_HW; + chip->ecc.strength = 1; + + switch (info->cpu_type) { + case TYPE_S3C2410: + chip->ecc.hwctl = s3c2410_nand_enable_hwecc; chip->ecc.calculate = s3c2410_nand_calculate_ecc; - chip->ecc.correct = s3c2410_nand_correct_data; - chip->ecc.mode = NAND_ECC_HW; - chip->ecc.strength = 1; - - switch (info->cpu_type) { - case TYPE_S3C2410: - chip->ecc.hwctl = s3c2410_nand_enable_hwecc; - chip->ecc.calculate = s3c2410_nand_calculate_ecc; - break; - - case TYPE_S3C2412: - chip->ecc.hwctl = s3c2412_nand_enable_hwecc; - chip->ecc.calculate = s3c2412_nand_calculate_ecc; - break; - - case TYPE_S3C2440: - chip->ecc.hwctl = s3c2440_nand_enable_hwecc; - chip->ecc.calculate = s3c2440_nand_calculate_ecc; - break; + break; - } - } else { - chip->ecc.mode = NAND_ECC_SOFT; + case TYPE_S3C2412: + chip->ecc.hwctl = s3c2412_nand_enable_hwecc; + chip->ecc.calculate = s3c2412_nand_calculate_ecc; + break; + + case TYPE_S3C2440: + chip->ecc.hwctl = s3c2440_nand_enable_hwecc; + chip->ecc.calculate = s3c2440_nand_calculate_ecc; + break; } +#else + chip->ecc.mode = NAND_ECC_SOFT; +#endif if (set->ecc_layout != NULL) chip->ecc.layout = set->ecc_layout; @@ -921,7 +902,7 @@ static void s3c2410_nand_update_chip(struct s3c2410_nand_info *info, static int s3c24xx_nand_probe(struct platform_device *pdev) { struct s3c2410_platform_nand *plat = to_nand_plat(pdev); - enum s3c_cpu_type cpu_type; + enum s3c_cpu_type cpu_type; struct s3c2410_nand_info *info; struct s3c2410_nand_mtd *nmtd; struct s3c2410_nand_set *sets; @@ -935,7 +916,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev) pr_debug("s3c2410_nand_probe(%p)\n", pdev); - info = kzalloc(sizeof(*info), GFP_KERNEL); + info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL); if (info == NULL) { dev_err(&pdev->dev, "no memory for flash info\n"); err = -ENOMEM; @@ -949,7 +930,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev) /* get the clock source and enable it */ - info->clk = clk_get(&pdev->dev, "nand"); + info->clk = devm_clk_get(&pdev->dev, "nand"); if (IS_ERR(info->clk)) { dev_err(&pdev->dev, "failed to get clock\n"); err = -ENOENT; @@ -961,22 +942,14 @@ static int s3c24xx_nand_probe(struct platform_device *pdev) /* allocate and map the resource */ /* currently we assume we have the one resource */ - res = pdev->resource; + res = pdev->resource; size = resource_size(res); - info->area = request_mem_region(res->start, size, pdev->name); - - if (info->area == NULL) { - dev_err(&pdev->dev, "cannot reserve register region\n"); - err = -ENOENT; - goto exit_error; - } - - info->device = &pdev->dev; - info->platform = plat; - info->regs = ioremap(res->start, size); - info->cpu_type = cpu_type; + info->device = &pdev->dev; + info->platform = plat; + info->cpu_type = cpu_type; + info->regs = devm_request_and_ioremap(&pdev->dev, res); if (info->regs == NULL) { dev_err(&pdev->dev, "cannot reserve register region\n"); err = -EIO; @@ -999,7 +972,7 @@ static int s3c24xx_nand_probe(struct platform_device *pdev) /* allocate our information */ size = nr_sets * sizeof(*info->mtds); - info->mtds = kzalloc(size, GFP_KERNEL); + info->mtds = devm_kzalloc(&pdev->dev, size, GFP_KERNEL); if (info->mtds == NULL) { dev_err(&pdev->dev, "failed to allocate mtd storage\n"); err = -ENOMEM; @@ -1011,7 +984,8 @@ static int s3c24xx_nand_probe(struct platform_device *pdev) nmtd = info->mtds; for (setno = 0; setno < nr_sets; setno++, nmtd++) { - pr_debug("initialising set %d (%p, info %p)\n", setno, nmtd, info); + pr_debug("initialising set %d (%p, info %p)\n", + setno, nmtd, info); s3c2410_nand_init_chip(info, nmtd, sets); @@ -1134,20 +1108,7 @@ static struct platform_driver s3c24xx_nand_driver = { }, }; -static int __init s3c2410_nand_init(void) -{ - printk("S3C24XX NAND Driver, (c) 2004 Simtec Electronics\n"); - - return platform_driver_register(&s3c24xx_nand_driver); -} - -static void __exit s3c2410_nand_exit(void) -{ - platform_driver_unregister(&s3c24xx_nand_driver); -} - -module_init(s3c2410_nand_init); -module_exit(s3c2410_nand_exit); +module_platform_driver(s3c24xx_nand_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c index aa9b8a5..4fbfe96 100644 --- a/drivers/mtd/nand/sh_flctl.c +++ b/drivers/mtd/nand/sh_flctl.c @@ -24,10 +24,12 @@ #include <linux/module.h> #include <linux/kernel.h> #include <linux/delay.h> +#include <linux/interrupt.h> #include <linux/io.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> #include <linux/slab.h> +#include <linux/string.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -43,11 +45,17 @@ static struct nand_ecclayout flctl_4secc_oob_16 = { }; static struct nand_ecclayout flctl_4secc_oob_64 = { - .eccbytes = 10, - .eccpos = {48, 49, 50, 51, 52, 53, 54, 55, 56, 57}, + .eccbytes = 4 * 10, + .eccpos = { + 6, 7, 8, 9, 10, 11, 12, 13, 14, 15, + 22, 23, 24, 25, 26, 27, 28, 29, 30, 31, + 38, 39, 40, 41, 42, 43, 44, 45, 46, 47, + 54, 55, 56, 57, 58, 59, 60, 61, 62, 63 }, .oobfree = { - {.offset = 60, - . length = 4} }, + {.offset = 2, .length = 4}, + {.offset = 16, .length = 6}, + {.offset = 32, .length = 6}, + {.offset = 48, .length = 6} }, }; static uint8_t scan_ff_pattern[] = { 0xff, 0xff }; @@ -61,15 +69,15 @@ static struct nand_bbt_descr flctl_4secc_smallpage = { static struct nand_bbt_descr flctl_4secc_largepage = { .options = NAND_BBT_SCAN2NDPAGE, - .offs = 58, + .offs = 0, .len = 2, .pattern = scan_ff_pattern, }; static void empty_fifo(struct sh_flctl *flctl) { - writel(0x000c0000, FLINTDMACR(flctl)); /* FIFO Clear */ - writel(0x00000000, FLINTDMACR(flctl)); /* Clear Error flags */ + writel(flctl->flintdmacr_base | AC1CLR | AC0CLR, FLINTDMACR(flctl)); + writel(flctl->flintdmacr_base, FLINTDMACR(flctl)); } static void start_translation(struct sh_flctl *flctl) @@ -158,27 +166,56 @@ static void wait_wfifo_ready(struct sh_flctl *flctl) timeout_error(flctl, __func__); } -static int wait_recfifo_ready(struct sh_flctl *flctl, int sector_number) +static enum flctl_ecc_res_t wait_recfifo_ready + (struct sh_flctl *flctl, int sector_number) { uint32_t timeout = LOOP_TIMEOUT_MAX; - int checked[4]; void __iomem *ecc_reg[4]; int i; + int state = FL_SUCCESS; uint32_t data, size; - memset(checked, 0, sizeof(checked)); - + /* + * First this loops checks in FLDTCNTR if we are ready to read out the + * oob data. This is the case if either all went fine without errors or + * if the bottom part of the loop corrected the errors or marked them as + * uncorrectable and the controller is given time to push the data into + * the FIFO. + */ while (timeout--) { + /* check if all is ok and we can read out the OOB */ size = readl(FLDTCNTR(flctl)) >> 24; - if (size & 0xFF) - return 0; /* success */ + if ((size & 0xFF) == 4) + return state; + + /* check if a correction code has been calculated */ + if (!(readl(FL4ECCCR(flctl)) & _4ECCEND)) { + /* + * either we wait for the fifo to be filled or a + * correction pattern is being generated + */ + udelay(1); + continue; + } - if (readl(FL4ECCCR(flctl)) & _4ECCFA) - return 1; /* can't correct */ + /* check for an uncorrectable error */ + if (readl(FL4ECCCR(flctl)) & _4ECCFA) { + /* check if we face a non-empty page */ + for (i = 0; i < 512; i++) { + if (flctl->done_buff[i] != 0xff) { + state = FL_ERROR; /* can't correct */ + break; + } + } - udelay(1); - if (!(readl(FL4ECCCR(flctl)) & _4ECCEND)) + if (state == FL_SUCCESS) + dev_dbg(&flctl->pdev->dev, + "reading empty sector %d, ecc error ignored\n", + sector_number); + + writel(0, FL4ECCCR(flctl)); continue; + } /* start error correction */ ecc_reg[0] = FL4ECCRESULT0(flctl); @@ -187,28 +224,26 @@ static int wait_recfifo_ready(struct sh_flctl *flctl, int sector_number) ecc_reg[3] = FL4ECCRESULT3(flctl); for (i = 0; i < 3; i++) { + uint8_t org; + int index; + data = readl(ecc_reg[i]); - if (data != INIT_FL4ECCRESULT_VAL && !checked[i]) { - uint8_t org; - int index; - - if (flctl->page_size) - index = (512 * sector_number) + - (data >> 16); - else - index = data >> 16; - - org = flctl->done_buff[index]; - flctl->done_buff[index] = org ^ (data & 0xFF); - checked[i] = 1; - } - } + if (flctl->page_size) + index = (512 * sector_number) + + (data >> 16); + else + index = data >> 16; + + org = flctl->done_buff[index]; + flctl->done_buff[index] = org ^ (data & 0xFF); + } + state = FL_REPAIRABLE; writel(0, FL4ECCCR(flctl)); } timeout_error(flctl, __func__); - return 1; /* timeout */ + return FL_TIMEOUT; /* timeout */ } static void wait_wecfifo_ready(struct sh_flctl *flctl) @@ -241,31 +276,33 @@ static void read_fiforeg(struct sh_flctl *flctl, int rlen, int offset) { int i, len_4align; unsigned long *buf = (unsigned long *)&flctl->done_buff[offset]; - void *fifo_addr = (void *)FLDTFIFO(flctl); len_4align = (rlen + 3) / 4; for (i = 0; i < len_4align; i++) { wait_rfifo_ready(flctl); - buf[i] = readl(fifo_addr); + buf[i] = readl(FLDTFIFO(flctl)); buf[i] = be32_to_cpu(buf[i]); } } -static int read_ecfiforeg(struct sh_flctl *flctl, uint8_t *buff, int sector) +static enum flctl_ecc_res_t read_ecfiforeg + (struct sh_flctl *flctl, uint8_t *buff, int sector) { int i; + enum flctl_ecc_res_t res; unsigned long *ecc_buf = (unsigned long *)buff; - void *fifo_addr = (void *)FLECFIFO(flctl); - for (i = 0; i < 4; i++) { - if (wait_recfifo_ready(flctl , sector)) - return 1; - ecc_buf[i] = readl(fifo_addr); - ecc_buf[i] = be32_to_cpu(ecc_buf[i]); + res = wait_recfifo_ready(flctl , sector); + + if (res != FL_ERROR) { + for (i = 0; i < 4; i++) { + ecc_buf[i] = readl(FLECFIFO(flctl)); + ecc_buf[i] = be32_to_cpu(ecc_buf[i]); + } } - return 0; + return res; } static void write_fiforeg(struct sh_flctl *flctl, int rlen, int offset) @@ -281,6 +318,18 @@ static void write_fiforeg(struct sh_flctl *flctl, int rlen, int offset) } } +static void write_ec_fiforeg(struct sh_flctl *flctl, int rlen, int offset) +{ + int i, len_4align; + unsigned long *data = (unsigned long *)&flctl->done_buff[offset]; + + len_4align = (rlen + 3) / 4; + for (i = 0; i < len_4align; i++) { + wait_wecfifo_ready(flctl); + writel(cpu_to_be32(data[i]), FLECFIFO(flctl)); + } +} + static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_val) { struct sh_flctl *flctl = mtd_to_flctl(mtd); @@ -346,73 +395,65 @@ static void set_cmd_regs(struct mtd_info *mtd, uint32_t cmd, uint32_t flcmcdr_va static int flctl_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int oob_required, int page) { - int i, eccsize = chip->ecc.size; - int eccbytes = chip->ecc.bytes; - int eccsteps = chip->ecc.steps; - uint8_t *p = buf; - struct sh_flctl *flctl = mtd_to_flctl(mtd); - - for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) - chip->read_buf(mtd, p, eccsize); - - for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) { - if (flctl->hwecc_cant_correct[i]) - mtd->ecc_stats.failed++; - else - mtd->ecc_stats.corrected += 0; /* FIXME */ - } - + chip->read_buf(mtd, buf, mtd->writesize); + if (oob_required) + chip->read_buf(mtd, chip->oob_poi, mtd->oobsize); return 0; } -static void flctl_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, +static int flctl_write_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required) { - int i, eccsize = chip->ecc.size; - int eccbytes = chip->ecc.bytes; - int eccsteps = chip->ecc.steps; - const uint8_t *p = buf; - - for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) - chip->write_buf(mtd, p, eccsize); + chip->write_buf(mtd, buf, mtd->writesize); + chip->write_buf(mtd, chip->oob_poi, mtd->oobsize); + return 0; } static void execmd_read_page_sector(struct mtd_info *mtd, int page_addr) { struct sh_flctl *flctl = mtd_to_flctl(mtd); int sector, page_sectors; + enum flctl_ecc_res_t ecc_result; - if (flctl->page_size) - page_sectors = 4; - else - page_sectors = 1; - - writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE | _4ECCCORRECT, - FLCMNCR(flctl)); + page_sectors = flctl->page_size ? 4 : 1; set_cmd_regs(mtd, NAND_CMD_READ0, (NAND_CMD_READSTART << 8) | NAND_CMD_READ0); - for (sector = 0; sector < page_sectors; sector++) { - int ret; + writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE | _4ECCCORRECT, + FLCMNCR(flctl)); + writel(readl(FLCMDCR(flctl)) | page_sectors, FLCMDCR(flctl)); + writel(page_addr << 2, FLADR(flctl)); - empty_fifo(flctl); - writel(readl(FLCMDCR(flctl)) | 1, FLCMDCR(flctl)); - writel(page_addr << 2 | sector, FLADR(flctl)); + empty_fifo(flctl); + start_translation(flctl); - start_translation(flctl); + for (sector = 0; sector < page_sectors; sector++) { read_fiforeg(flctl, 512, 512 * sector); - ret = read_ecfiforeg(flctl, + ecc_result = read_ecfiforeg(flctl, &flctl->done_buff[mtd->writesize + 16 * sector], sector); - if (ret) - flctl->hwecc_cant_correct[sector] = 1; - - writel(0x0, FL4ECCCR(flctl)); - wait_completion(flctl); + switch (ecc_result) { + case FL_REPAIRABLE: + dev_info(&flctl->pdev->dev, + "applied ecc on page 0x%x", page_addr); + flctl->mtd.ecc_stats.corrected++; + break; + case FL_ERROR: + dev_warn(&flctl->pdev->dev, + "page 0x%x contains corrupted data\n", + page_addr); + flctl->mtd.ecc_stats.failed++; + break; + default: + ; + } } + + wait_completion(flctl); + writel(readl(FLCMNCR(flctl)) & ~(ACM_SACCES_MODE | _4ECCCORRECT), FLCMNCR(flctl)); } @@ -420,30 +461,20 @@ static void execmd_read_page_sector(struct mtd_info *mtd, int page_addr) static void execmd_read_oob(struct mtd_info *mtd, int page_addr) { struct sh_flctl *flctl = mtd_to_flctl(mtd); + int page_sectors = flctl->page_size ? 4 : 1; + int i; set_cmd_regs(mtd, NAND_CMD_READ0, (NAND_CMD_READSTART << 8) | NAND_CMD_READ0); empty_fifo(flctl); - if (flctl->page_size) { - int i; - /* In case that the page size is 2k */ - for (i = 0; i < 16 * 3; i++) - flctl->done_buff[i] = 0xFF; - - set_addr(mtd, 3 * 528 + 512, page_addr); - writel(16, FLDTCNTR(flctl)); - start_translation(flctl); - read_fiforeg(flctl, 16, 16 * 3); - wait_completion(flctl); - } else { - /* In case that the page size is 512b */ - set_addr(mtd, 512, page_addr); + for (i = 0; i < page_sectors; i++) { + set_addr(mtd, (512 + 16) * i + 512 , page_addr); writel(16, FLDTCNTR(flctl)); start_translation(flctl); - read_fiforeg(flctl, 16, 0); + read_fiforeg(flctl, 16, 16 * i); wait_completion(flctl); } } @@ -451,34 +482,26 @@ static void execmd_read_oob(struct mtd_info *mtd, int page_addr) static void execmd_write_page_sector(struct mtd_info *mtd) { struct sh_flctl *flctl = mtd_to_flctl(mtd); - int i, page_addr = flctl->seqin_page_addr; + int page_addr = flctl->seqin_page_addr; int sector, page_sectors; - if (flctl->page_size) - page_sectors = 4; - else - page_sectors = 1; - - writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE, FLCMNCR(flctl)); + page_sectors = flctl->page_size ? 4 : 1; set_cmd_regs(mtd, NAND_CMD_PAGEPROG, (NAND_CMD_PAGEPROG << 8) | NAND_CMD_SEQIN); - for (sector = 0; sector < page_sectors; sector++) { - empty_fifo(flctl); - writel(readl(FLCMDCR(flctl)) | 1, FLCMDCR(flctl)); - writel(page_addr << 2 | sector, FLADR(flctl)); + empty_fifo(flctl); + writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE, FLCMNCR(flctl)); + writel(readl(FLCMDCR(flctl)) | page_sectors, FLCMDCR(flctl)); + writel(page_addr << 2, FLADR(flctl)); + start_translation(flctl); - start_translation(flctl); + for (sector = 0; sector < page_sectors; sector++) { write_fiforeg(flctl, 512, 512 * sector); - - for (i = 0; i < 4; i++) { - wait_wecfifo_ready(flctl); /* wait for write ready */ - writel(0xFFFFFFFF, FLECFIFO(flctl)); - } - wait_completion(flctl); + write_ec_fiforeg(flctl, 16, mtd->writesize + 16 * sector); } + wait_completion(flctl); writel(readl(FLCMNCR(flctl)) & ~ACM_SACCES_MODE, FLCMNCR(flctl)); } @@ -488,18 +511,12 @@ static void execmd_write_oob(struct mtd_info *mtd) int page_addr = flctl->seqin_page_addr; int sector, page_sectors; - if (flctl->page_size) { - sector = 3; - page_sectors = 4; - } else { - sector = 0; - page_sectors = 1; - } + page_sectors = flctl->page_size ? 4 : 1; set_cmd_regs(mtd, NAND_CMD_PAGEPROG, (NAND_CMD_PAGEPROG << 8) | NAND_CMD_SEQIN); - for (; sector < page_sectors; sector++) { + for (sector = 0; sector < page_sectors; sector++) { empty_fifo(flctl); set_addr(mtd, sector * 528 + 512, page_addr); writel(16, FLDTCNTR(flctl)); /* set read size */ @@ -731,10 +748,9 @@ static void flctl_select_chip(struct mtd_info *mtd, int chipnr) static void flctl_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len) { struct sh_flctl *flctl = mtd_to_flctl(mtd); - int i, index = flctl->index; + int index = flctl->index; - for (i = 0; i < len; i++) - flctl->done_buff[index + i] = buf[i]; + memcpy(&flctl->done_buff[index], buf, len); flctl->index += len; } @@ -763,20 +779,11 @@ static uint16_t flctl_read_word(struct mtd_info *mtd) static void flctl_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) { - int i; - - for (i = 0; i < len; i++) - buf[i] = flctl_read_byte(mtd); -} - -static int flctl_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) -{ - int i; + struct sh_flctl *flctl = mtd_to_flctl(mtd); + int index = flctl->index; - for (i = 0; i < len; i++) - if (buf[i] != flctl_read_byte(mtd)) - return -EFAULT; - return 0; + memcpy(buf, &flctl->done_buff[index], len); + flctl->index += len; } static int flctl_chip_init_tail(struct mtd_info *mtd) @@ -831,7 +838,7 @@ static int flctl_chip_init_tail(struct mtd_info *mtd) chip->ecc.mode = NAND_ECC_HW; /* 4 symbols ECC enabled */ - flctl->flcmncr_base |= _4ECCEN | ECCPOS2 | ECCPOS_02; + flctl->flcmncr_base |= _4ECCEN; } else { chip->ecc.mode = NAND_ECC_SOFT; } @@ -839,6 +846,16 @@ static int flctl_chip_init_tail(struct mtd_info *mtd) return 0; } +static irqreturn_t flctl_handle_flste(int irq, void *dev_id) +{ + struct sh_flctl *flctl = dev_id; + + dev_err(&flctl->pdev->dev, "flste irq: %x\n", readl(FLINTDMACR(flctl))); + writel(flctl->flintdmacr_base, FLINTDMACR(flctl)); + + return IRQ_HANDLED; +} + static int __devinit flctl_probe(struct platform_device *pdev) { struct resource *res; @@ -847,6 +864,7 @@ static int __devinit flctl_probe(struct platform_device *pdev) struct nand_chip *nand; struct sh_flctl_platform_data *pdata; int ret = -ENXIO; + int irq; pdata = pdev->dev.platform_data; if (pdata == NULL) { @@ -872,14 +890,27 @@ static int __devinit flctl_probe(struct platform_device *pdev) goto err_iomap; } + irq = platform_get_irq(pdev, 0); + if (irq < 0) { + dev_err(&pdev->dev, "failed to get flste irq data\n"); + goto err_flste; + } + + ret = request_irq(irq, flctl_handle_flste, IRQF_SHARED, "flste", flctl); + if (ret) { + dev_err(&pdev->dev, "request interrupt failed.\n"); + goto err_flste; + } + platform_set_drvdata(pdev, flctl); flctl_mtd = &flctl->mtd; nand = &flctl->chip; flctl_mtd->priv = nand; flctl->pdev = pdev; - flctl->flcmncr_base = pdata->flcmncr_val; flctl->hwecc = pdata->has_hwecc; flctl->holden = pdata->use_holden; + flctl->flcmncr_base = pdata->flcmncr_val; + flctl->flintdmacr_base = flctl->hwecc ? (STERINTE | ECERB) : STERINTE; /* Set address of hardware control function */ /* 20 us command delay time */ @@ -888,7 +919,6 @@ static int __devinit flctl_probe(struct platform_device *pdev) nand->read_byte = flctl_read_byte; nand->write_buf = flctl_write_buf; nand->read_buf = flctl_read_buf; - nand->verify_buf = flctl_verify_buf; nand->select_chip = flctl_select_chip; nand->cmdfunc = flctl_cmdfunc; @@ -918,6 +948,9 @@ static int __devinit flctl_probe(struct platform_device *pdev) err_chip: pm_runtime_disable(&pdev->dev); + free_irq(irq, flctl); +err_flste: + iounmap(flctl->reg); err_iomap: kfree(flctl); return ret; @@ -929,6 +962,8 @@ static int __devexit flctl_remove(struct platform_device *pdev) nand_release(&flctl->mtd); pm_runtime_disable(&pdev->dev); + free_irq(platform_get_irq(pdev, 0), flctl); + iounmap(flctl->reg); kfree(flctl); return 0; diff --git a/drivers/mtd/nand/socrates_nand.c b/drivers/mtd/nand/socrates_nand.c index e02b08b..f3f28fa 100644 --- a/drivers/mtd/nand/socrates_nand.c +++ b/drivers/mtd/nand/socrates_nand.c @@ -98,24 +98,6 @@ static uint16_t socrates_nand_read_word(struct mtd_info *mtd) return word; } -/** - * socrates_nand_verify_buf - Verify chip data against buffer - * @mtd: MTD device structure - * @buf: buffer containing the data to compare - * @len: number of bytes to compare - */ -static int socrates_nand_verify_buf(struct mtd_info *mtd, const u8 *buf, - int len) -{ - int i; - - for (i = 0; i < len; i++) { - if (buf[i] != socrates_nand_read_byte(mtd)) - return -EFAULT; - } - return 0; -} - /* * Hardware specific access to control-lines */ @@ -201,7 +183,6 @@ static int __devinit socrates_nand_probe(struct platform_device *ofdev) nand_chip->read_word = socrates_nand_read_word; nand_chip->write_buf = socrates_nand_write_buf; nand_chip->read_buf = socrates_nand_read_buf; - nand_chip->verify_buf = socrates_nand_verify_buf; nand_chip->dev_ready = socrates_nand_device_ready; nand_chip->ecc.mode = NAND_ECC_SOFT; /* enable ECC */ diff --git a/drivers/mtd/nand/tmio_nand.c b/drivers/mtd/nand/tmio_nand.c index 5aa5180..508e9e0 100644 --- a/drivers/mtd/nand/tmio_nand.c +++ b/drivers/mtd/nand/tmio_nand.c @@ -256,18 +256,6 @@ static void tmio_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len) tmio_ioread16_rep(tmio->fcr + FCR_DATA, buf, len >> 1); } -static int -tmio_nand_verify_buf(struct mtd_info *mtd, const u_char *buf, int len) -{ - struct tmio_nand *tmio = mtd_to_tmio(mtd); - u16 *p = (u16 *) buf; - - for (len >>= 1; len; len--) - if (*(p++) != tmio_ioread16(tmio->fcr + FCR_DATA)) - return -EFAULT; - return 0; -} - static void tmio_nand_enable_hwecc(struct mtd_info *mtd, int mode) { struct tmio_nand *tmio = mtd_to_tmio(mtd); @@ -424,7 +412,6 @@ static int tmio_probe(struct platform_device *dev) nand_chip->read_byte = tmio_nand_read_byte; nand_chip->write_buf = tmio_nand_write_buf; nand_chip->read_buf = tmio_nand_read_buf; - nand_chip->verify_buf = tmio_nand_verify_buf; /* set eccmode using hardware ECC */ nand_chip->ecc.mode = NAND_ECC_HW; diff --git a/drivers/mtd/nand/txx9ndfmc.c b/drivers/mtd/nand/txx9ndfmc.c index 26398dcf..e3d7266 100644 --- a/drivers/mtd/nand/txx9ndfmc.c +++ b/drivers/mtd/nand/txx9ndfmc.c @@ -131,18 +131,6 @@ static void txx9ndfmc_read_buf(struct mtd_info *mtd, uint8_t *buf, int len) *buf++ = __raw_readl(ndfdtr); } -static int txx9ndfmc_verify_buf(struct mtd_info *mtd, const uint8_t *buf, - int len) -{ - struct platform_device *dev = mtd_to_platdev(mtd); - void __iomem *ndfdtr = ndregaddr(dev, TXX9_NDFDTR); - - while (len--) - if (*buf++ != (uint8_t)__raw_readl(ndfdtr)) - return -EFAULT; - return 0; -} - static void txx9ndfmc_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) { @@ -346,7 +334,6 @@ static int __init txx9ndfmc_probe(struct platform_device *dev) chip->read_byte = txx9ndfmc_read_byte; chip->read_buf = txx9ndfmc_read_buf; chip->write_buf = txx9ndfmc_write_buf; - chip->verify_buf = txx9ndfmc_verify_buf; chip->cmd_ctrl = txx9ndfmc_cmd_ctrl; chip->dev_ready = txx9ndfmc_dev_ready; chip->ecc.calculate = txx9ndfmc_calculate_ecc; diff --git a/drivers/mtd/nand/xway_nand.c b/drivers/mtd/nand/xway_nand.c new file mode 100644 index 0000000..3f81dc8 --- /dev/null +++ b/drivers/mtd/nand/xway_nand.c @@ -0,0 +1,201 @@ +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + * + * Copyright © 2012 John Crispin <blogic@openwrt.org> + */ + +#include <linux/mtd/nand.h> +#include <linux/of_gpio.h> +#include <linux/of_platform.h> + +#include <lantiq_soc.h> + +/* nand registers */ +#define EBU_ADDSEL1 0x24 +#define EBU_NAND_CON 0xB0 +#define EBU_NAND_WAIT 0xB4 +#define EBU_NAND_ECC0 0xB8 +#define EBU_NAND_ECC_AC 0xBC + +/* nand commands */ +#define NAND_CMD_ALE (1 << 2) +#define NAND_CMD_CLE (1 << 3) +#define NAND_CMD_CS (1 << 4) +#define NAND_WRITE_CMD_RESET 0xff +#define NAND_WRITE_CMD (NAND_CMD_CS | NAND_CMD_CLE) +#define NAND_WRITE_ADDR (NAND_CMD_CS | NAND_CMD_ALE) +#define NAND_WRITE_DATA (NAND_CMD_CS) +#define NAND_READ_DATA (NAND_CMD_CS) +#define NAND_WAIT_WR_C (1 << 3) +#define NAND_WAIT_RD (0x1) + +/* we need to tel the ebu which addr we mapped the nand to */ +#define ADDSEL1_MASK(x) (x << 4) +#define ADDSEL1_REGEN 1 + +/* we need to tell the EBU that we have nand attached and set it up properly */ +#define BUSCON1_SETUP (1 << 22) +#define BUSCON1_BCGEN_RES (0x3 << 12) +#define BUSCON1_WAITWRC2 (2 << 8) +#define BUSCON1_WAITRDC2 (2 << 6) +#define BUSCON1_HOLDC1 (1 << 4) +#define BUSCON1_RECOVC1 (1 << 2) +#define BUSCON1_CMULT4 1 + +#define NAND_CON_CE (1 << 20) +#define NAND_CON_OUT_CS1 (1 << 10) +#define NAND_CON_IN_CS1 (1 << 8) +#define NAND_CON_PRE_P (1 << 7) +#define NAND_CON_WP_P (1 << 6) +#define NAND_CON_SE_P (1 << 5) +#define NAND_CON_CS_P (1 << 4) +#define NAND_CON_CSMUX (1 << 1) +#define NAND_CON_NANDM 1 + +static void xway_reset_chip(struct nand_chip *chip) +{ + unsigned long nandaddr = (unsigned long) chip->IO_ADDR_W; + unsigned long flags; + + nandaddr &= ~NAND_WRITE_ADDR; + nandaddr |= NAND_WRITE_CMD; + + /* finish with a reset */ + spin_lock_irqsave(&ebu_lock, flags); + writeb(NAND_WRITE_CMD_RESET, (void __iomem *) nandaddr); + while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) + ; + spin_unlock_irqrestore(&ebu_lock, flags); +} + +static void xway_select_chip(struct mtd_info *mtd, int chip) +{ + + switch (chip) { + case -1: + ltq_ebu_w32_mask(NAND_CON_CE, 0, EBU_NAND_CON); + ltq_ebu_w32_mask(NAND_CON_NANDM, 0, EBU_NAND_CON); + break; + case 0: + ltq_ebu_w32_mask(0, NAND_CON_NANDM, EBU_NAND_CON); + ltq_ebu_w32_mask(0, NAND_CON_CE, EBU_NAND_CON); + break; + default: + BUG(); + } +} + +static void xway_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) +{ + struct nand_chip *this = mtd->priv; + unsigned long nandaddr = (unsigned long) this->IO_ADDR_W; + unsigned long flags; + + if (ctrl & NAND_CTRL_CHANGE) { + nandaddr &= ~(NAND_WRITE_CMD | NAND_WRITE_ADDR); + if (ctrl & NAND_CLE) + nandaddr |= NAND_WRITE_CMD; + else + nandaddr |= NAND_WRITE_ADDR; + this->IO_ADDR_W = (void __iomem *) nandaddr; + } + + if (cmd != NAND_CMD_NONE) { + spin_lock_irqsave(&ebu_lock, flags); + writeb(cmd, this->IO_ADDR_W); + while ((ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_WR_C) == 0) + ; + spin_unlock_irqrestore(&ebu_lock, flags); + } +} + +static int xway_dev_ready(struct mtd_info *mtd) +{ + return ltq_ebu_r32(EBU_NAND_WAIT) & NAND_WAIT_RD; +} + +static unsigned char xway_read_byte(struct mtd_info *mtd) +{ + struct nand_chip *this = mtd->priv; + unsigned long nandaddr = (unsigned long) this->IO_ADDR_R; + unsigned long flags; + int ret; + + spin_lock_irqsave(&ebu_lock, flags); + ret = ltq_r8((void __iomem *)(nandaddr + NAND_READ_DATA)); + spin_unlock_irqrestore(&ebu_lock, flags); + + return ret; +} + +static int xway_nand_probe(struct platform_device *pdev) +{ + struct nand_chip *this = platform_get_drvdata(pdev); + unsigned long nandaddr = (unsigned long) this->IO_ADDR_W; + const __be32 *cs = of_get_property(pdev->dev.of_node, + "lantiq,cs", NULL); + u32 cs_flag = 0; + + /* load our CS from the DT. Either we find a valid 1 or default to 0 */ + if (cs && (*cs == 1)) + cs_flag = NAND_CON_IN_CS1 | NAND_CON_OUT_CS1; + + /* setup the EBU to run in NAND mode on our base addr */ + ltq_ebu_w32(CPHYSADDR(nandaddr) + | ADDSEL1_MASK(3) | ADDSEL1_REGEN, EBU_ADDSEL1); + + ltq_ebu_w32(BUSCON1_SETUP | BUSCON1_BCGEN_RES | BUSCON1_WAITWRC2 + | BUSCON1_WAITRDC2 | BUSCON1_HOLDC1 | BUSCON1_RECOVC1 + | BUSCON1_CMULT4, LTQ_EBU_BUSCON1); + + ltq_ebu_w32(NAND_CON_NANDM | NAND_CON_CSMUX | NAND_CON_CS_P + | NAND_CON_SE_P | NAND_CON_WP_P | NAND_CON_PRE_P + | cs_flag, EBU_NAND_CON); + + /* finish with a reset */ + xway_reset_chip(this); + + return 0; +} + +/* allow users to override the partition in DT using the cmdline */ +static const char *part_probes[] = { "cmdlinepart", "ofpart", NULL }; + +static struct platform_nand_data xway_nand_data = { + .chip = { + .nr_chips = 1, + .chip_delay = 30, + .part_probe_types = part_probes, + }, + .ctrl = { + .probe = xway_nand_probe, + .cmd_ctrl = xway_cmd_ctrl, + .dev_ready = xway_dev_ready, + .select_chip = xway_select_chip, + .read_byte = xway_read_byte, + } +}; + +/* + * Try to find the node inside the DT. If it is available attach out + * platform_nand_data + */ +static int __init xway_register_nand(void) +{ + struct device_node *node; + struct platform_device *pdev; + + node = of_find_compatible_node(NULL, NULL, "lantiq,nand-xway"); + if (!node) + return -ENOENT; + pdev = of_find_device_by_node(node); + if (!pdev) + return -EINVAL; + pdev->dev.platform_data = &xway_nand_data; + of_node_put(node); + return 0; +} + +subsys_initcall(xway_register_nand); diff --git a/drivers/mtd/sm_ftl.c b/drivers/mtd/sm_ftl.c index 9e2dfd5..8dd6ba5 100644 --- a/drivers/mtd/sm_ftl.c +++ b/drivers/mtd/sm_ftl.c @@ -346,7 +346,6 @@ static int sm_write_sector(struct sm_ftl *ftl, ret = mtd_write_oob(mtd, sm_mkoffset(ftl, zone, block, boffset), &ops); /* Now we assume that hardware will catch write bitflip errors */ - /* If you are paranoid, use CONFIG_MTD_NAND_VERIFY_WRITE */ if (ret) { dbg("write to block %d at zone %d, failed with error %d", diff --git a/drivers/mtd/tests/Makefile b/drivers/mtd/tests/Makefile index b44dcab..bd0065c 100644 --- a/drivers/mtd/tests/Makefile +++ b/drivers/mtd/tests/Makefile @@ -6,3 +6,4 @@ obj-$(CONFIG_MTD_TESTS) += mtd_stresstest.o obj-$(CONFIG_MTD_TESTS) += mtd_subpagetest.o obj-$(CONFIG_MTD_TESTS) += mtd_torturetest.o obj-$(CONFIG_MTD_TESTS) += mtd_nandecctest.o +obj-$(CONFIG_MTD_TESTS) += mtd_nandbiterrs.o diff --git a/drivers/mtd/tests/mtd_nandbiterrs.c b/drivers/mtd/tests/mtd_nandbiterrs.c new file mode 100644 index 0000000..cc8d62c --- /dev/null +++ b/drivers/mtd/tests/mtd_nandbiterrs.c @@ -0,0 +1,460 @@ +/* + * Copyright © 2012 NetCommWireless + * Iwo Mergler <Iwo.Mergler@netcommwireless.com.au> + * + * Test for multi-bit error recovery on a NAND page This mostly tests the + * ECC controller / driver. + * + * There are two test modes: + * + * 0 - artificially inserting bit errors until the ECC fails + * This is the default method and fairly quick. It should + * be independent of the quality of the FLASH. + * + * 1 - re-writing the same pattern repeatedly until the ECC fails. + * This method relies on the physics of NAND FLASH to eventually + * generate '0' bits if '1' has been written sufficient times. + * Depending on the NAND, the first bit errors will appear after + * 1000 or more writes and then will usually snowball, reaching the + * limits of the ECC quickly. + * + * The test stops after 10000 cycles, should your FLASH be + * exceptionally good and not generate bit errors before that. Try + * a different page in that case. + * + * Please note that neither of these tests will significantly 'use up' any + * FLASH endurance. Only a maximum of two erase operations will be performed. + * + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published by + * the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + * + * You should have received a copy of the GNU General Public License along with + * this program; see the file COPYING. If not, write to the Free Software + * Foundation, 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + */ +#include <linux/init.h> +#include <linux/module.h> +#include <linux/moduleparam.h> +#include <linux/mtd/mtd.h> +#include <linux/err.h> +#include <linux/mtd/nand.h> +#include <linux/slab.h> + +#define msg(FMT, VA...) pr_info("mtd_nandbiterrs: "FMT, ##VA) + +static int dev; +module_param(dev, int, S_IRUGO); +MODULE_PARM_DESC(dev, "MTD device number to use"); + +static unsigned page_offset; +module_param(page_offset, uint, S_IRUGO); +MODULE_PARM_DESC(page_offset, "Page number relative to dev start"); + +static unsigned seed; +module_param(seed, uint, S_IRUGO); +MODULE_PARM_DESC(seed, "Random seed"); + +static int mode; +module_param(mode, int, S_IRUGO); +MODULE_PARM_DESC(mode, "0=incremental errors, 1=overwrite test"); + +static unsigned max_overwrite = 10000; + +static loff_t offset; /* Offset of the page we're using. */ +static unsigned eraseblock; /* Eraseblock number for our page. */ + +/* We assume that the ECC can correct up to a certain number + * of biterrors per subpage. */ +static unsigned subsize; /* Size of subpages */ +static unsigned subcount; /* Number of subpages per page */ + +static struct mtd_info *mtd; /* MTD device */ + +static uint8_t *wbuffer; /* One page write / compare buffer */ +static uint8_t *rbuffer; /* One page read buffer */ + +/* 'random' bytes from known offsets */ +static uint8_t hash(unsigned offset) +{ + unsigned v = offset; + unsigned char c; + v ^= 0x7f7edfd3; + v = v ^ (v >> 3); + v = v ^ (v >> 5); + v = v ^ (v >> 13); + c = v & 0xFF; + /* Reverse bits of result. */ + c = (c & 0x0F) << 4 | (c & 0xF0) >> 4; + c = (c & 0x33) << 2 | (c & 0xCC) >> 2; + c = (c & 0x55) << 1 | (c & 0xAA) >> 1; + return c; +} + +static int erase_block(void) +{ + int err; + struct erase_info ei; + loff_t addr = eraseblock * mtd->erasesize; + + msg("erase_block\n"); + + memset(&ei, 0, sizeof(struct erase_info)); + ei.mtd = mtd; + ei.addr = addr; + ei.len = mtd->erasesize; + + err = mtd_erase(mtd, &ei); + if (err || ei.state == MTD_ERASE_FAILED) { + msg("error %d while erasing\n", err); + if (!err) + err = -EIO; + return err; + } + + return 0; +} + +/* Writes wbuffer to page */ +static int write_page(int log) +{ + int err = 0; + size_t written; + + if (log) + msg("write_page\n"); + + err = mtd_write(mtd, offset, mtd->writesize, &written, wbuffer); + if (err || written != mtd->writesize) { + msg("error: write failed at %#llx\n", (long long)offset); + if (!err) + err = -EIO; + } + + return err; +} + +/* Re-writes the data area while leaving the OOB alone. */ +static int rewrite_page(int log) +{ + int err = 0; + struct mtd_oob_ops ops; + + if (log) + msg("rewrite page\n"); + + ops.mode = MTD_OPS_RAW; /* No ECC */ + ops.len = mtd->writesize; + ops.retlen = 0; + ops.ooblen = 0; + ops.oobretlen = 0; + ops.ooboffs = 0; + ops.datbuf = wbuffer; + ops.oobbuf = NULL; + + err = mtd_write_oob(mtd, offset, &ops); + if (err || ops.retlen != mtd->writesize) { + msg("error: write_oob failed (%d)\n", err); + if (!err) + err = -EIO; + } + + return err; +} + +/* Reads page into rbuffer. Returns number of corrected bit errors (>=0) + * or error (<0) */ +static int read_page(int log) +{ + int err = 0; + size_t read; + struct mtd_ecc_stats oldstats; + + if (log) + msg("read_page\n"); + + /* Saving last mtd stats */ + memcpy(&oldstats, &mtd->ecc_stats, sizeof(oldstats)); + + err = mtd_read(mtd, offset, mtd->writesize, &read, rbuffer); + if (err == -EUCLEAN) + err = mtd->ecc_stats.corrected - oldstats.corrected; + + if (err < 0 || read != mtd->writesize) { + msg("error: read failed at %#llx\n", (long long)offset); + if (err >= 0) + err = -EIO; + } + + return err; +} + +/* Verifies rbuffer against random sequence */ +static int verify_page(int log) +{ + unsigned i, errs = 0; + + if (log) + msg("verify_page\n"); + + for (i = 0; i < mtd->writesize; i++) { + if (rbuffer[i] != hash(i+seed)) { + msg("Error: page offset %u, expected %02x, got %02x\n", + i, hash(i+seed), rbuffer[i]); + errs++; + } + } + + if (errs) + return -EIO; + else + return 0; +} + +#define CBIT(v, n) ((v) & (1 << (n))) +#define BCLR(v, n) ((v) = (v) & ~(1 << (n))) + +/* Finds the first '1' bit in wbuffer starting at offset 'byte' + * and sets it to '0'. */ +static int insert_biterror(unsigned byte) +{ + int bit; + + while (byte < mtd->writesize) { + for (bit = 7; bit >= 0; bit--) { + if (CBIT(wbuffer[byte], bit)) { + BCLR(wbuffer[byte], bit); + msg("Inserted biterror @ %u/%u\n", byte, bit); + return 0; + } + } + byte++; + } + msg("biterror: Failed to find a '1' bit\n"); + return -EIO; +} + +/* Writes 'random' data to page and then introduces deliberate bit + * errors into the page, while verifying each step. */ +static int incremental_errors_test(void) +{ + int err = 0; + unsigned i; + unsigned errs_per_subpage = 0; + + msg("incremental biterrors test\n"); + + for (i = 0; i < mtd->writesize; i++) + wbuffer[i] = hash(i+seed); + + err = write_page(1); + if (err) + goto exit; + + while (1) { + + err = rewrite_page(1); + if (err) + goto exit; + + err = read_page(1); + if (err > 0) + msg("Read reported %d corrected bit errors\n", err); + if (err < 0) { + msg("After %d biterrors per subpage, read reported error %d\n", + errs_per_subpage, err); + err = 0; + goto exit; + } + + err = verify_page(1); + if (err) { + msg("ECC failure, read data is incorrect despite read success\n"); + goto exit; + } + + msg("Successfully corrected %d bit errors per subpage\n", + errs_per_subpage); + + for (i = 0; i < subcount; i++) { + err = insert_biterror(i * subsize); + if (err < 0) + goto exit; + } + errs_per_subpage++; + } + +exit: + return err; +} + + +/* Writes 'random' data to page and then re-writes that same data repeatedly. + This eventually develops bit errors (bits written as '1' will slowly become + '0'), which are corrected as far as the ECC is capable of. */ +static int overwrite_test(void) +{ + int err = 0; + unsigned i; + unsigned max_corrected = 0; + unsigned opno = 0; + /* We don't expect more than this many correctable bit errors per + * page. */ + #define MAXBITS 512 + static unsigned bitstats[MAXBITS]; /* bit error histogram. */ + + memset(bitstats, 0, sizeof(bitstats)); + + msg("overwrite biterrors test\n"); + + for (i = 0; i < mtd->writesize; i++) + wbuffer[i] = hash(i+seed); + + err = write_page(1); + if (err) + goto exit; + + while (opno < max_overwrite) { + + err = rewrite_page(0); + if (err) + break; + + err = read_page(0); + if (err >= 0) { + if (err >= MAXBITS) { + msg("Implausible number of bit errors corrected\n"); + err = -EIO; + break; + } + bitstats[err]++; + if (err > max_corrected) { + max_corrected = err; + msg("Read reported %d corrected bit errors\n", + err); + } + } else { /* err < 0 */ + msg("Read reported error %d\n", err); + err = 0; + break; + } + + err = verify_page(0); + if (err) { + bitstats[max_corrected] = opno; + msg("ECC failure, read data is incorrect despite read success\n"); + break; + } + + opno++; + } + + /* At this point bitstats[0] contains the number of ops with no bit + * errors, bitstats[1] the number of ops with 1 bit error, etc. */ + msg("Bit error histogram (%d operations total):\n", opno); + for (i = 0; i < max_corrected; i++) + msg("Page reads with %3d corrected bit errors: %d\n", + i, bitstats[i]); + +exit: + return err; +} + +static int __init mtd_nandbiterrs_init(void) +{ + int err = 0; + + msg("\n"); + msg("==================================================\n"); + msg("MTD device: %d\n", dev); + + mtd = get_mtd_device(NULL, dev); + if (IS_ERR(mtd)) { + err = PTR_ERR(mtd); + msg("error: cannot get MTD device\n"); + goto exit_mtddev; + } + + if (mtd->type != MTD_NANDFLASH) { + msg("this test requires NAND flash\n"); + err = -ENODEV; + goto exit_nand; + } + + msg("MTD device size %llu, eraseblock=%u, page=%u, oob=%u\n", + (unsigned long long)mtd->size, mtd->erasesize, + mtd->writesize, mtd->oobsize); + + subsize = mtd->writesize >> mtd->subpage_sft; + subcount = mtd->writesize / subsize; + + msg("Device uses %d subpages of %d bytes\n", subcount, subsize); + + offset = page_offset * mtd->writesize; + eraseblock = mtd_div_by_eb(offset, mtd); + + msg("Using page=%u, offset=%llu, eraseblock=%u\n", + page_offset, offset, eraseblock); + + wbuffer = kmalloc(mtd->writesize, GFP_KERNEL); + if (!wbuffer) { + err = -ENOMEM; + goto exit_wbuffer; + } + + rbuffer = kmalloc(mtd->writesize, GFP_KERNEL); + if (!rbuffer) { + err = -ENOMEM; + goto exit_rbuffer; + } + + err = erase_block(); + if (err) + goto exit_error; + + if (mode == 0) + err = incremental_errors_test(); + else + err = overwrite_test(); + + if (err) + goto exit_error; + + /* We leave the block un-erased in case of test failure. */ + err = erase_block(); + if (err) + goto exit_error; + + err = -EIO; + msg("finished successfully.\n"); + msg("==================================================\n"); + +exit_error: + kfree(rbuffer); +exit_rbuffer: + kfree(wbuffer); +exit_wbuffer: + /* Nothing */ +exit_nand: + put_mtd_device(mtd); +exit_mtddev: + return err; +} + +static void __exit mtd_nandbiterrs_exit(void) +{ + return; +} + +module_init(mtd_nandbiterrs_init); +module_exit(mtd_nandbiterrs_exit); + +MODULE_DESCRIPTION("NAND bit error recovery test"); +MODULE_AUTHOR("Iwo Mergler"); +MODULE_LICENSE("GPL"); diff --git a/drivers/mtd/tests/mtd_nandecctest.c b/drivers/mtd/tests/mtd_nandecctest.c index 70d6d7d..b437fa4 100644 --- a/drivers/mtd/tests/mtd_nandecctest.c +++ b/drivers/mtd/tests/mtd_nandecctest.c @@ -4,60 +4,287 @@ #include <linux/random.h> #include <linux/string.h> #include <linux/bitops.h> -#include <linux/jiffies.h> +#include <linux/slab.h> #include <linux/mtd/nand_ecc.h> +/* + * Test the implementation for software ECC + * + * No actual MTD device is needed, So we don't need to warry about losing + * important data by human error. + * + * This covers possible patterns of corruption which can be reliably corrected + * or detected. + */ + #if defined(CONFIG_MTD_NAND) || defined(CONFIG_MTD_NAND_MODULE) -static void inject_single_bit_error(void *data, size_t size) +struct nand_ecc_test { + const char *name; + void (*prepare)(void *, void *, void *, void *, const size_t); + int (*verify)(void *, void *, void *, const size_t); +}; + +/* + * The reason for this __change_bit_le() instead of __change_bit() is to inject + * bit error properly within the region which is not a multiple of + * sizeof(unsigned long) on big-endian systems + */ +#ifdef __LITTLE_ENDIAN +#define __change_bit_le(nr, addr) __change_bit(nr, addr) +#elif defined(__BIG_ENDIAN) +#define __change_bit_le(nr, addr) \ + __change_bit((nr) ^ ((BITS_PER_LONG - 1) & ~0x7), addr) +#else +#error "Unknown byte order" +#endif + +static void single_bit_error_data(void *error_data, void *correct_data, + size_t size) { - unsigned long offset = random32() % (size * BITS_PER_BYTE); + unsigned int offset = random32() % (size * BITS_PER_BYTE); - __change_bit(offset, data); + memcpy(error_data, correct_data, size); + __change_bit_le(offset, error_data); } -static unsigned char data[512]; -static unsigned char error_data[512]; +static void double_bit_error_data(void *error_data, void *correct_data, + size_t size) +{ + unsigned int offset[2]; + + offset[0] = random32() % (size * BITS_PER_BYTE); + do { + offset[1] = random32() % (size * BITS_PER_BYTE); + } while (offset[0] == offset[1]); -static int nand_ecc_test(const size_t size) + memcpy(error_data, correct_data, size); + + __change_bit_le(offset[0], error_data); + __change_bit_le(offset[1], error_data); +} + +static unsigned int random_ecc_bit(size_t size) { - unsigned char code[3]; - unsigned char error_code[3]; - char testname[30]; + unsigned int offset = random32() % (3 * BITS_PER_BYTE); + + if (size == 256) { + /* + * Don't inject a bit error into the insignificant bits (16th + * and 17th bit) in ECC code for 256 byte data block + */ + while (offset == 16 || offset == 17) + offset = random32() % (3 * BITS_PER_BYTE); + } - BUG_ON(sizeof(data) < size); + return offset; +} - sprintf(testname, "nand-ecc-%zu", size); +static void single_bit_error_ecc(void *error_ecc, void *correct_ecc, + size_t size) +{ + unsigned int offset = random_ecc_bit(size); - get_random_bytes(data, size); + memcpy(error_ecc, correct_ecc, 3); + __change_bit_le(offset, error_ecc); +} - memcpy(error_data, data, size); - inject_single_bit_error(error_data, size); +static void double_bit_error_ecc(void *error_ecc, void *correct_ecc, + size_t size) +{ + unsigned int offset[2]; - __nand_calculate_ecc(data, size, code); - __nand_calculate_ecc(error_data, size, error_code); - __nand_correct_data(error_data, code, error_code, size); + offset[0] = random_ecc_bit(size); + do { + offset[1] = random_ecc_bit(size); + } while (offset[0] == offset[1]); - if (!memcmp(data, error_data, size)) { - printk(KERN_INFO "mtd_nandecctest: ok - %s\n", testname); + memcpy(error_ecc, correct_ecc, 3); + __change_bit_le(offset[0], error_ecc); + __change_bit_le(offset[1], error_ecc); +} + +static void no_bit_error(void *error_data, void *error_ecc, + void *correct_data, void *correct_ecc, const size_t size) +{ + memcpy(error_data, correct_data, size); + memcpy(error_ecc, correct_ecc, 3); +} + +static int no_bit_error_verify(void *error_data, void *error_ecc, + void *correct_data, const size_t size) +{ + unsigned char calc_ecc[3]; + int ret; + + __nand_calculate_ecc(error_data, size, calc_ecc); + ret = __nand_correct_data(error_data, error_ecc, calc_ecc, size); + if (ret == 0 && !memcmp(correct_data, error_data, size)) return 0; - } - printk(KERN_ERR "mtd_nandecctest: not ok - %s\n", testname); + return -EINVAL; +} + +static void single_bit_error_in_data(void *error_data, void *error_ecc, + void *correct_data, void *correct_ecc, const size_t size) +{ + single_bit_error_data(error_data, correct_data, size); + memcpy(error_ecc, correct_ecc, 3); +} + +static void single_bit_error_in_ecc(void *error_data, void *error_ecc, + void *correct_data, void *correct_ecc, const size_t size) +{ + memcpy(error_data, correct_data, size); + single_bit_error_ecc(error_ecc, correct_ecc, size); +} + +static int single_bit_error_correct(void *error_data, void *error_ecc, + void *correct_data, const size_t size) +{ + unsigned char calc_ecc[3]; + int ret; - printk(KERN_DEBUG "hexdump of data:\n"); - print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 4, - data, size, false); - printk(KERN_DEBUG "hexdump of error data:\n"); - print_hex_dump(KERN_DEBUG, "", DUMP_PREFIX_OFFSET, 16, 4, + __nand_calculate_ecc(error_data, size, calc_ecc); + ret = __nand_correct_data(error_data, error_ecc, calc_ecc, size); + if (ret == 1 && !memcmp(correct_data, error_data, size)) + return 0; + + return -EINVAL; +} + +static void double_bit_error_in_data(void *error_data, void *error_ecc, + void *correct_data, void *correct_ecc, const size_t size) +{ + double_bit_error_data(error_data, correct_data, size); + memcpy(error_ecc, correct_ecc, 3); +} + +static void single_bit_error_in_data_and_ecc(void *error_data, void *error_ecc, + void *correct_data, void *correct_ecc, const size_t size) +{ + single_bit_error_data(error_data, correct_data, size); + single_bit_error_ecc(error_ecc, correct_ecc, size); +} + +static void double_bit_error_in_ecc(void *error_data, void *error_ecc, + void *correct_data, void *correct_ecc, const size_t size) +{ + memcpy(error_data, correct_data, size); + double_bit_error_ecc(error_ecc, correct_ecc, size); +} + +static int double_bit_error_detect(void *error_data, void *error_ecc, + void *correct_data, const size_t size) +{ + unsigned char calc_ecc[3]; + int ret; + + __nand_calculate_ecc(error_data, size, calc_ecc); + ret = __nand_correct_data(error_data, error_ecc, calc_ecc, size); + + return (ret == -1) ? 0 : -EINVAL; +} + +static const struct nand_ecc_test nand_ecc_test[] = { + { + .name = "no-bit-error", + .prepare = no_bit_error, + .verify = no_bit_error_verify, + }, + { + .name = "single-bit-error-in-data-correct", + .prepare = single_bit_error_in_data, + .verify = single_bit_error_correct, + }, + { + .name = "single-bit-error-in-ecc-correct", + .prepare = single_bit_error_in_ecc, + .verify = single_bit_error_correct, + }, + { + .name = "double-bit-error-in-data-detect", + .prepare = double_bit_error_in_data, + .verify = double_bit_error_detect, + }, + { + .name = "single-bit-error-in-data-and-ecc-detect", + .prepare = single_bit_error_in_data_and_ecc, + .verify = double_bit_error_detect, + }, + { + .name = "double-bit-error-in-ecc-detect", + .prepare = double_bit_error_in_ecc, + .verify = double_bit_error_detect, + }, +}; + +static void dump_data_ecc(void *error_data, void *error_ecc, void *correct_data, + void *correct_ecc, const size_t size) +{ + pr_info("hexdump of error data:\n"); + print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 4, error_data, size, false); + print_hex_dump(KERN_INFO, "hexdump of error ecc: ", + DUMP_PREFIX_NONE, 16, 1, error_ecc, 3, false); + + pr_info("hexdump of correct data:\n"); + print_hex_dump(KERN_INFO, "", DUMP_PREFIX_OFFSET, 16, 4, + correct_data, size, false); + print_hex_dump(KERN_INFO, "hexdump of correct ecc: ", + DUMP_PREFIX_NONE, 16, 1, correct_ecc, 3, false); +} + +static int nand_ecc_test_run(const size_t size) +{ + int i; + int err = 0; + void *error_data; + void *error_ecc; + void *correct_data; + void *correct_ecc; - return -1; + error_data = kmalloc(size, GFP_KERNEL); + error_ecc = kmalloc(3, GFP_KERNEL); + correct_data = kmalloc(size, GFP_KERNEL); + correct_ecc = kmalloc(3, GFP_KERNEL); + + if (!error_data || !error_ecc || !correct_data || !correct_ecc) { + err = -ENOMEM; + goto error; + } + + get_random_bytes(correct_data, size); + __nand_calculate_ecc(correct_data, size, correct_ecc); + + for (i = 0; i < ARRAY_SIZE(nand_ecc_test); i++) { + nand_ecc_test[i].prepare(error_data, error_ecc, + correct_data, correct_ecc, size); + err = nand_ecc_test[i].verify(error_data, error_ecc, + correct_data, size); + + if (err) { + pr_err("mtd_nandecctest: not ok - %s-%zd\n", + nand_ecc_test[i].name, size); + dump_data_ecc(error_data, error_ecc, + correct_data, correct_ecc, size); + break; + } + pr_info("mtd_nandecctest: ok - %s-%zd\n", + nand_ecc_test[i].name, size); + } +error: + kfree(error_data); + kfree(error_ecc); + kfree(correct_data); + kfree(correct_ecc); + + return err; } #else -static int nand_ecc_test(const size_t size) +static int nand_ecc_test_run(const size_t size) { return 0; } @@ -66,12 +293,13 @@ static int nand_ecc_test(const size_t size) static int __init ecc_test_init(void) { - srandom32(jiffies); + int err; - nand_ecc_test(256); - nand_ecc_test(512); + err = nand_ecc_test_run(256); + if (err) + return err; - return 0; + return nand_ecc_test_run(512); } static void __exit ecc_test_exit(void) diff --git a/drivers/mtd/tests/mtd_speedtest.c b/drivers/mtd/tests/mtd_speedtest.c index 2aec4f3..42b0f74 100644 --- a/drivers/mtd/tests/mtd_speedtest.c +++ b/drivers/mtd/tests/mtd_speedtest.c @@ -26,6 +26,7 @@ #include <linux/mtd/mtd.h> #include <linux/slab.h> #include <linux/sched.h> +#include <linux/random.h> #define PRINT_PREF KERN_INFO "mtd_speedtest: " @@ -47,25 +48,13 @@ static int ebcnt; static int pgcnt; static int goodebcnt; static struct timeval start, finish; -static unsigned long next = 1; - -static inline unsigned int simple_rand(void) -{ - next = next * 1103515245 + 12345; - return (unsigned int)((next / 65536) % 32768); -} - -static inline void simple_srand(unsigned long seed) -{ - next = seed; -} static void set_random_data(unsigned char *buf, size_t len) { size_t i; for (i = 0; i < len; ++i) - buf[i] = simple_rand(); + buf[i] = random32(); } static int erase_eraseblock(int ebnum) @@ -407,7 +396,6 @@ static int __init mtd_speedtest_init(void) goto out; } - simple_srand(1); set_random_data(iobuf, mtd->erasesize); err = scan_for_bad_eraseblocks(); diff --git a/drivers/mtd/tests/mtd_stresstest.c b/drivers/mtd/tests/mtd_stresstest.c index 7b33f22..cb268ce 100644 --- a/drivers/mtd/tests/mtd_stresstest.c +++ b/drivers/mtd/tests/mtd_stresstest.c @@ -27,6 +27,7 @@ #include <linux/slab.h> #include <linux/sched.h> #include <linux/vmalloc.h> +#include <linux/random.h> #define PRINT_PREF KERN_INFO "mtd_stresstest: " @@ -48,28 +49,13 @@ static int pgsize; static int bufsize; static int ebcnt; static int pgcnt; -static unsigned long next = 1; - -static inline unsigned int simple_rand(void) -{ - next = next * 1103515245 + 12345; - return (unsigned int)((next / 65536) % 32768); -} - -static inline void simple_srand(unsigned long seed) -{ - next = seed; -} static int rand_eb(void) { - int eb; + unsigned int eb; again: - if (ebcnt < 32768) - eb = simple_rand(); - else - eb = (simple_rand() << 15) | simple_rand(); + eb = random32(); /* Read or write up 2 eraseblocks at a time - hence 'ebcnt - 1' */ eb %= (ebcnt - 1); if (bbt[eb]) @@ -79,24 +65,18 @@ again: static int rand_offs(void) { - int offs; + unsigned int offs; - if (bufsize < 32768) - offs = simple_rand(); - else - offs = (simple_rand() << 15) | simple_rand(); + offs = random32(); offs %= bufsize; return offs; } static int rand_len(int offs) { - int len; + unsigned int len; - if (bufsize < 32768) - len = simple_rand(); - else - len = (simple_rand() << 15) | simple_rand(); + len = random32(); len %= (bufsize - offs); return len; } @@ -211,7 +191,7 @@ static int do_write(void) static int do_operation(void) { - if (simple_rand() & 1) + if (random32() & 1) return do_read(); else return do_write(); @@ -302,9 +282,8 @@ static int __init mtd_stresstest_init(void) } for (i = 0; i < ebcnt; i++) offsets[i] = mtd->erasesize; - simple_srand(current->pid); for (i = 0; i < bufsize; i++) - writebuf[i] = simple_rand(); + writebuf[i] = random32(); err = scan_for_bad_eraseblocks(); if (err) diff --git a/fs/jffs2/super.c b/fs/jffs2/super.c index ff48795..d3d8799 100644 --- a/fs/jffs2/super.c +++ b/fs/jffs2/super.c @@ -100,6 +100,10 @@ static int jffs2_sync_fs(struct super_block *sb, int wait) { struct jffs2_sb_info *c = JFFS2_SB_INFO(sb); +#ifdef CONFIG_JFFS2_FS_WRITEBUFFER + cancel_delayed_work_sync(&c->wbuf_dwork); +#endif + mutex_lock(&c->alloc_sem); jffs2_flush_wbuf_pad(c); mutex_unlock(&c->alloc_sem); diff --git a/fs/jffs2/wbuf.c b/fs/jffs2/wbuf.c index 6f4529d..a6597d6 100644 --- a/fs/jffs2/wbuf.c +++ b/fs/jffs2/wbuf.c @@ -1044,10 +1044,10 @@ int jffs2_check_oob_empty(struct jffs2_sb_info *c, ops.datbuf = NULL; ret = mtd_read_oob(c->mtd, jeb->offset, &ops); - if (ret || ops.oobretlen != ops.ooblen) { + if ((ret && !mtd_is_bitflip(ret)) || ops.oobretlen != ops.ooblen) { pr_err("cannot read OOB for EB at %08x, requested %zd bytes, read %zd bytes, error %d\n", jeb->offset, ops.ooblen, ops.oobretlen, ret); - if (!ret) + if (!ret || mtd_is_bitflip(ret)) ret = -EIO; return ret; } @@ -1086,10 +1086,10 @@ int jffs2_check_nand_cleanmarker(struct jffs2_sb_info *c, ops.datbuf = NULL; ret = mtd_read_oob(c->mtd, jeb->offset, &ops); - if (ret || ops.oobretlen != ops.ooblen) { + if ((ret && !mtd_is_bitflip(ret)) || ops.oobretlen != ops.ooblen) { pr_err("cannot read OOB for EB at %08x, requested %zd bytes, read %zd bytes, error %d\n", jeb->offset, ops.ooblen, ops.oobretlen, ret); - if (!ret) + if (!ret || mtd_is_bitflip(ret)) ret = -EIO; return ret; } diff --git a/include/linux/bcma/bcma_driver_chipcommon.h b/include/linux/bcma/bcma_driver_chipcommon.h index 6ba45d2..1cf1749 100644 --- a/include/linux/bcma/bcma_driver_chipcommon.h +++ b/include/linux/bcma/bcma_driver_chipcommon.h @@ -522,6 +522,8 @@ struct bcma_sflash { u32 blocksize; u16 numblocks; u32 size; + + struct mtd_info *mtd; }; #endif diff --git a/include/linux/mtd/bbm.h b/include/linux/mtd/bbm.h index 650ef35..211ff67 100644 --- a/include/linux/mtd/bbm.h +++ b/include/linux/mtd/bbm.h @@ -78,8 +78,6 @@ struct nand_bbt_descr { #define NAND_BBT_LASTBLOCK 0x00000010 /* The bbt is at the given page, else we must scan for the bbt */ #define NAND_BBT_ABSPAGE 0x00000020 -/* The bbt is at the given page, else we must scan for the bbt */ -#define NAND_BBT_SEARCH 0x00000040 /* bbt is stored per chip on multichip devices */ #define NAND_BBT_PERCHIP 0x00000080 /* bbt has a version counter at offset veroffs */ @@ -110,7 +108,10 @@ struct nand_bbt_descr { * OOB area. This option is passed to the default bad block table function. */ #define NAND_BBT_USE_FLASH 0x00020000 -/* Do not store flash based bad block table in OOB area; store it in-band */ +/* + * Do not store flash based bad block table marker in the OOB area; store it + * in-band. + */ #define NAND_BBT_NO_OOB 0x00040000 /* * Do not write new bad block markers to OOB; useful, e.g., when ECC covers diff --git a/include/linux/mtd/lpc32xx_mlc.h b/include/linux/mtd/lpc32xx_mlc.h new file mode 100644 index 0000000..d91b1e3 --- /dev/null +++ b/include/linux/mtd/lpc32xx_mlc.h @@ -0,0 +1,20 @@ +/* + * Platform data for LPC32xx SoC MLC NAND controller + * + * Copyright © 2012 Roland Stigge + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_MTD_LPC32XX_MLC_H +#define __LINUX_MTD_LPC32XX_MLC_H + +#include <linux/dmaengine.h> + +struct lpc32xx_mlc_platform_data { + bool (*dma_filter)(struct dma_chan *chan, void *filter_param); +}; + +#endif /* __LINUX_MTD_LPC32XX_MLC_H */ diff --git a/include/linux/mtd/lpc32xx_slc.h b/include/linux/mtd/lpc32xx_slc.h new file mode 100644 index 0000000..1169548 --- /dev/null +++ b/include/linux/mtd/lpc32xx_slc.h @@ -0,0 +1,20 @@ +/* + * Platform data for LPC32xx SoC SLC NAND controller + * + * Copyright © 2012 Roland Stigge + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __LINUX_MTD_LPC32XX_SLC_H +#define __LINUX_MTD_LPC32XX_SLC_H + +#include <linux/dmaengine.h> + +struct lpc32xx_slc_platform_data { + bool (*dma_filter)(struct dma_chan *chan, void *filter_param); +}; + +#endif /* __LINUX_MTD_LPC32XX_SLC_H */ diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h index 63dadc0..81d61e7 100644 --- a/include/linux/mtd/mtd.h +++ b/include/linux/mtd/mtd.h @@ -265,14 +265,7 @@ int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, int mtd_panic_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, const u_char *buf); -static inline int mtd_read_oob(struct mtd_info *mtd, loff_t from, - struct mtd_oob_ops *ops) -{ - ops->retlen = ops->oobretlen = 0; - if (!mtd->_read_oob) - return -EOPNOTSUPP; - return mtd->_read_oob(mtd, from, ops); -} +int mtd_read_oob(struct mtd_info *mtd, loff_t from, struct mtd_oob_ops *ops); static inline int mtd_write_oob(struct mtd_info *mtd, loff_t to, struct mtd_oob_ops *ops) diff --git a/include/linux/mtd/nand.h b/include/linux/mtd/nand.h index 57977c6..24e9159 100644 --- a/include/linux/mtd/nand.h +++ b/include/linux/mtd/nand.h @@ -56,7 +56,7 @@ extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); * is supported now. If you add a chip with bigger oobsize/page * adjust this accordingly. */ -#define NAND_MAX_OOBSIZE 576 +#define NAND_MAX_OOBSIZE 640 #define NAND_MAX_PAGESIZE 8192 /* @@ -92,6 +92,8 @@ extern int nand_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len); #define NAND_CMD_READID 0x90 #define NAND_CMD_ERASE2 0xd0 #define NAND_CMD_PARAM 0xec +#define NAND_CMD_GET_FEATURES 0xee +#define NAND_CMD_SET_FEATURES 0xef #define NAND_CMD_RESET 0xff #define NAND_CMD_LOCK 0x2a @@ -185,12 +187,6 @@ typedef enum { * This happens with the Renesas AG-AND chips, possibly others. */ #define BBT_AUTO_REFRESH 0x00000080 -/* - * Chip does not require ready check on read. True - * for all large page devices, as they do not support - * autoincrement. - */ -#define NAND_NO_READRDY 0x00000100 /* Chip does not allow subpage writes */ #define NAND_NO_SUBPAGE_WRITE 0x00000200 @@ -200,6 +196,9 @@ typedef enum { /* Device behaves just like nand, but is readonly */ #define NAND_ROM 0x00000800 +/* Device supports subpage reads */ +#define NAND_SUBPAGE_READ 0x00001000 + /* Options valid for Samsung large page devices */ #define NAND_SAMSUNG_LP_OPTIONS \ (NAND_NO_PADDING | NAND_CACHEPRG | NAND_COPYBACK) @@ -208,12 +207,7 @@ typedef enum { #define NAND_MUST_PAD(chip) (!(chip->options & NAND_NO_PADDING)) #define NAND_HAS_CACHEPROG(chip) ((chip->options & NAND_CACHEPRG)) #define NAND_HAS_COPYBACK(chip) ((chip->options & NAND_COPYBACK)) -/* Large page NAND with SOFT_ECC should support subpage reads */ -#define NAND_SUBPAGE_READ(chip) ((chip->ecc.mode == NAND_ECC_SOFT) \ - && (chip->page_shift > 9)) - -/* Mask to zero out the chip options, which come from the id table */ -#define NAND_CHIPOPTIONS_MSK 0x0000ffff +#define NAND_HAS_SUBPAGE_READ(chip) ((chip->options & NAND_SUBPAGE_READ)) /* Non chip related options */ /* This option skips the bbt scan during initialization. */ @@ -237,6 +231,21 @@ typedef enum { /* Keep gcc happy */ struct nand_chip; +/* ONFI timing mode, used in both asynchronous and synchronous mode */ +#define ONFI_TIMING_MODE_0 (1 << 0) +#define ONFI_TIMING_MODE_1 (1 << 1) +#define ONFI_TIMING_MODE_2 (1 << 2) +#define ONFI_TIMING_MODE_3 (1 << 3) +#define ONFI_TIMING_MODE_4 (1 << 4) +#define ONFI_TIMING_MODE_5 (1 << 5) +#define ONFI_TIMING_MODE_UNKNOWN (1 << 6) + +/* ONFI feature address */ +#define ONFI_FEATURE_ADDR_TIMING_MODE 0x1 + +/* ONFI subfeature parameters length */ +#define ONFI_SUBFEATURE_PARAM_LEN 4 + struct nand_onfi_params { /* rev info and features block */ /* 'O' 'N' 'F' 'I' */ @@ -334,8 +343,10 @@ struct nand_hw_control { * @read_page_raw: function to read a raw page without ECC * @write_page_raw: function to write a raw page without ECC * @read_page: function to read a page according to the ECC generator - * requirements. - * @read_subpage: function to read parts of the page covered by ECC. + * requirements; returns maximum number of bitflips corrected in + * any single ECC step, 0 if bitflips uncorrectable, -EIO hw error + * @read_subpage: function to read parts of the page covered by ECC; + * returns same as read_page() * @write_page: function to write a page according to the ECC generator * requirements. * @write_oob_raw: function to write chip OOB data without ECC @@ -361,13 +372,13 @@ struct nand_ecc_ctrl { uint8_t *calc_ecc); int (*read_page_raw)(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int oob_required, int page); - void (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip, + int (*write_page_raw)(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required); int (*read_page)(struct mtd_info *mtd, struct nand_chip *chip, uint8_t *buf, int oob_required, int page); int (*read_subpage)(struct mtd_info *mtd, struct nand_chip *chip, uint32_t offs, uint32_t len, uint8_t *buf); - void (*write_page)(struct mtd_info *mtd, struct nand_chip *chip, + int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required); int (*write_oob_raw)(struct mtd_info *mtd, struct nand_chip *chip, int page); @@ -403,8 +414,6 @@ struct nand_buffers { * @read_word: [REPLACEABLE] read one word from the chip * @write_buf: [REPLACEABLE] write data from the buffer to the chip * @read_buf: [REPLACEABLE] read data from the chip into the buffer - * @verify_buf: [REPLACEABLE] verify buffer contents against the chip - * data. * @select_chip: [REPLACEABLE] select chip nr * @block_bad: [REPLACEABLE] check, if the block is bad * @block_markbad: [REPLACEABLE] mark the block bad @@ -462,6 +471,8 @@ struct nand_buffers { * non 0 if ONFI supported. * @onfi_params: [INTERN] holds the ONFI page parameter when ONFI is * supported, 0 otherwise. + * @onfi_set_features [REPLACEABLE] set the features for ONFI nand + * @onfi_get_features [REPLACEABLE] get the features for ONFI nand * @ecclayout: [REPLACEABLE] the default ECC placement scheme * @bbt: [INTERN] bad block table pointer * @bbt_td: [REPLACEABLE] bad block table descriptor for flash @@ -487,7 +498,6 @@ struct nand_chip { u16 (*read_word)(struct mtd_info *mtd); void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len); void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len); - int (*verify_buf)(struct mtd_info *mtd, const uint8_t *buf, int len); void (*select_chip)(struct mtd_info *mtd, int chip); int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip); int (*block_markbad)(struct mtd_info *mtd, loff_t ofs); @@ -505,6 +515,10 @@ struct nand_chip { int (*write_page)(struct mtd_info *mtd, struct nand_chip *chip, const uint8_t *buf, int oob_required, int page, int cached, int raw); + int (*onfi_set_features)(struct mtd_info *mtd, struct nand_chip *chip, + int feature_addr, uint8_t *subfeature_para); + int (*onfi_get_features)(struct mtd_info *mtd, struct nand_chip *chip, + int feature_addr, uint8_t *subfeature_para); int chip_delay; unsigned int options; @@ -559,6 +573,7 @@ struct nand_chip { #define NAND_MFR_MICRON 0x2c #define NAND_MFR_AMD 0x01 #define NAND_MFR_MACRONIX 0xc2 +#define NAND_MFR_EON 0x92 /** * struct nand_flash_dev - NAND Flash Device ID Structure @@ -641,6 +656,7 @@ struct platform_device; * ALE/CLE/nCE. Also used to write command and address * @write_buf: platform specific function for write buffer * @read_buf: platform specific function for read buffer + * @read_byte: platform specific function to read one byte from chip * @priv: private data to transport driver specific settings * * All fields are optional and depend on the hardware driver requirements @@ -677,4 +693,20 @@ struct platform_nand_chip *get_platform_nandchip(struct mtd_info *mtd) return chip->priv; } +/* return the supported asynchronous timing mode. */ +static inline int onfi_get_async_timing_mode(struct nand_chip *chip) +{ + if (!chip->onfi_version) + return ONFI_TIMING_MODE_UNKNOWN; + return le16_to_cpu(chip->onfi_params.async_timing_mode); +} + +/* return the supported synchronous timing mode. */ +static inline int onfi_get_sync_timing_mode(struct nand_chip *chip) +{ + if (!chip->onfi_version) + return ONFI_TIMING_MODE_UNKNOWN; + return le16_to_cpu(chip->onfi_params.src_sync_timing_mode); +} + #endif /* __LINUX_MTD_NAND_H */ diff --git a/include/linux/mtd/sh_flctl.h b/include/linux/mtd/sh_flctl.h index a38e1fa..01e4b15 100644 --- a/include/linux/mtd/sh_flctl.h +++ b/include/linux/mtd/sh_flctl.h @@ -49,7 +49,6 @@ #define FLERRADR(f) (f->reg + 0x98) /* FLCMNCR control bits */ -#define ECCPOS2 (0x1 << 25) #define _4ECCCNTEN (0x1 << 24) #define _4ECCEN (0x1 << 23) #define _4ECCCORRECT (0x1 << 22) @@ -59,9 +58,6 @@ #define QTSEL_E (0x1 << 17) #define ENDIAN (0x1 << 16) /* 1 = little endian */ #define FCKSEL_E (0x1 << 15) -#define ECCPOS_00 (0x00 << 12) -#define ECCPOS_01 (0x01 << 12) -#define ECCPOS_02 (0x02 << 12) #define ACM_SACCES_MODE (0x01 << 10) #define NANWF_E (0x1 << 9) #define SE_D (0x1 << 8) /* Spare area disable */ @@ -107,6 +103,14 @@ #define DOCMD2_E (0x1 << 17) /* 2nd cmd stage execute */ #define DOCMD1_E (0x1 << 16) /* 1st cmd stage execute */ +/* FLINTDMACR control bits */ +#define ESTERINTE (0x1 << 24) /* ECC error interrupt enable */ +#define AC1CLR (0x1 << 19) /* ECC FIFO clear */ +#define AC0CLR (0x1 << 18) /* Data FIFO clear */ +#define ECERB (0x1 << 9) /* ECC error */ +#define STERB (0x1 << 8) /* Status error */ +#define STERINTE (0x1 << 4) /* Status error enable */ + /* FLTRCR control bits */ #define TRSTRT (0x1 << 0) /* translation start */ #define TREND (0x1 << 1) /* translation end */ @@ -125,9 +129,15 @@ #define _4ECCEND (0x1 << 1) /* 4 symbols end */ #define _4ECCEXST (0x1 << 0) /* 4 symbols exist */ -#define INIT_FL4ECCRESULT_VAL 0x03FF03FF #define LOOP_TIMEOUT_MAX 0x00010000 +enum flctl_ecc_res_t { + FL_SUCCESS, + FL_REPAIRABLE, + FL_ERROR, + FL_TIMEOUT +}; + struct sh_flctl { struct mtd_info mtd; struct nand_chip chip; @@ -145,8 +155,7 @@ struct sh_flctl { uint32_t erase_ADRCNT; /* bits of FLCMDCR in ERASE1 cmd */ uint32_t rw_ADRCNT; /* bits of FLCMDCR in READ WRITE cmd */ uint32_t flcmncr_base; /* base value of FLCMNCR */ - - int hwecc_cant_correct[4]; + uint32_t flintdmacr_base; /* irq enable bits */ unsigned page_size:1; /* NAND page size (0 = 512, 1 = 2048) */ unsigned hwecc:1; /* Hardware ECC (0 = disabled, 1 = enabled) */ diff --git a/include/mtd/Kbuild b/include/mtd/Kbuild index 192f8fb..e69de29 100644 --- a/include/mtd/Kbuild +++ b/include/mtd/Kbuild @@ -1,5 +0,0 @@ -header-y += inftl-user.h -header-y += mtd-abi.h -header-y += mtd-user.h -header-y += nftl-user.h -header-y += ubi-user.h diff --git a/include/uapi/mtd/Kbuild b/include/uapi/mtd/Kbuild index aafaa5a..5a691e1 100644 --- a/include/uapi/mtd/Kbuild +++ b/include/uapi/mtd/Kbuild @@ -1 +1,6 @@ # UAPI Header export list +header-y += inftl-user.h +header-y += mtd-abi.h +header-y += mtd-user.h +header-y += nftl-user.h +header-y += ubi-user.h diff --git a/include/mtd/inftl-user.h b/include/uapi/mtd/inftl-user.h index 8376bd1..8376bd1 100644 --- a/include/mtd/inftl-user.h +++ b/include/uapi/mtd/inftl-user.h diff --git a/include/mtd/mtd-abi.h b/include/uapi/mtd/mtd-abi.h index 36eace0..36eace0 100644 --- a/include/mtd/mtd-abi.h +++ b/include/uapi/mtd/mtd-abi.h diff --git a/include/mtd/mtd-user.h b/include/uapi/mtd/mtd-user.h index 83327c8..83327c8 100644 --- a/include/mtd/mtd-user.h +++ b/include/uapi/mtd/mtd-user.h diff --git a/include/mtd/nftl-user.h b/include/uapi/mtd/nftl-user.h index bdeabd8..bdeabd8 100644 --- a/include/mtd/nftl-user.h +++ b/include/uapi/mtd/nftl-user.h diff --git a/include/mtd/ubi-user.h b/include/uapi/mtd/ubi-user.h index 53cae1e..53cae1e 100644 --- a/include/mtd/ubi-user.h +++ b/include/uapi/mtd/ubi-user.h |