Merge branch 'pm-upstream/fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into devel-stable

475 files changed, 20762 insertions, 12160 deletions

diff --git a/CREDITS b/CREDITS
index e76d300..1a41bf4 100644
--- a/CREDITS
+++ b/CREDITS
@@ -2006,6 +2006,9 @@ E: paul@laufernet.com
 D: Soundblaster driver fixes, ISAPnP quirk
 S: California, USA
 
+N: Jonathan Layes
+D: ARPD support
+
 N: Tom Lees
 E: tom@lpsg.demon.co.uk
 W: http://www.lpsg.demon.co.uk/
@@ -3802,6 +3805,9 @@ S: van Bronckhorststraat 12
 S: 2612 XV Delft
 S: The Netherlands
 
+N: Thomas Woller
+D: CS461x Cirrus Logic sound driver
+
 N: David Woodhouse
 E: dwmw2@infradead.org
 D: JFFS2 file system, Memory Technology Device subsystem,
diff --git a/Documentation/filesystems/sysfs.txt b/Documentation/filesystems/sysfs.txt
index 7e81e37..b245d52 100644
--- a/Documentation/filesystems/sysfs.txt
+++ b/Documentation/filesystems/sysfs.txt
@@ -23,7 +23,8 @@ interface.
 Using sysfs
 ~~~~~~~~~~~
 
-sysfs is always compiled in. You can access it by doing:
+sysfs is always compiled in if CONFIG_SYSFS is defined. You can access
+it by doing:
 
     mount -t sysfs sysfs /sys 
 
diff --git a/Documentation/lguest/lguest.c b/Documentation/lguest/lguest.c
index 9ebcd6e..950cde6 100644
--- a/Documentation/lguest/lguest.c
+++ b/Documentation/lguest/lguest.c
@@ -1,7 +1,9 @@
-/*P:100 This is the Launcher code, a simple program which lays out the
- * "physical" memory for the new Guest by mapping the kernel image and
- * the virtual devices, then opens /dev/lguest to tell the kernel
- * about the Guest and control it. :*/
+/*P:100
+ * This is the Launcher code, a simple program which lays out the "physical"
+ * memory for the new Guest by mapping the kernel image and the virtual
+ * devices, then opens /dev/lguest to tell the kernel about the Guest and
+ * control it.
+:*/
 #define _LARGEFILE64_SOURCE
 #define _GNU_SOURCE
 #include <stdio.h>
@@ -46,13 +48,15 @@
 #include "linux/virtio_rng.h"
 #include "linux/virtio_ring.h"
 #include "asm/bootparam.h"
-/*L:110 We can ignore the 39 include files we need for this program, but I do
- * want to draw attention to the use of kernel-style types.
+/*L:110
+ * We can ignore the 42 include files we need for this program, but I do want
+ * to draw attention to the use of kernel-style types.
  *
  * As Linus said, "C is a Spartan language, and so should your naming be."  I
  * like these abbreviations, so we define them here.  Note that u64 is always
  * unsigned long long, which works on all Linux systems: this means that we can
- * use %llu in printf for any u64. */
+ * use %llu in printf for any u64.
+ */
 typedef unsigned long long u64;
 typedef uint32_t u32;
 typedef uint16_t u16;
@@ -69,8 +73,10 @@ typedef uint8_t u8;
 /* This will occupy 3 pages: it must be a power of 2. */
 #define VIRTQUEUE_NUM 256
 
-/*L:120 verbose is both a global flag and a macro.  The C preprocessor allows
- * this, and although I wouldn't recommend it, it works quite nicely here. */
+/*L:120
+ * verbose is both a global flag and a macro.  The C preprocessor allows
+ * this, and although I wouldn't recommend it, it works quite nicely here.
+ */
 static bool verbose;
 #define verbose(args...) \
 	do { if (verbose) printf(args); } while(0)
@@ -87,8 +93,7 @@ static int lguest_fd;
 static unsigned int __thread cpu_id;
 
 /* This is our list of devices. */
-struct device_list
-{
+struct device_list {
 	/* Counter to assign interrupt numbers. */
 	unsigned int next_irq;
 
@@ -100,8 +105,7 @@ struct device_list
 
 	/* A single linked list of devices. */
 	struct device *dev;
-	/* And a pointer to the last device for easy append and also for
-	 * configuration appending. */
+	/* And a pointer to the last device for easy append. */
 	struct device *lastdev;
 };
 
@@ -109,8 +113,7 @@ struct device_list
 static struct device_list devices;
 
 /* The device structure describes a single device. */
-struct device
-{
+struct device {
 	/* The linked-list pointer. */
 	struct device *next;
 
@@ -135,8 +138,7 @@ struct device
 };
 
 /* The virtqueue structure describes a queue attached to a device. */
-struct virtqueue
-{
+struct virtqueue {
 	struct virtqueue *next;
 
 	/* Which device owns me. */
@@ -168,20 +170,24 @@ static char **main_args;
 /* The original tty settings to restore on exit. */
 static struct termios orig_term;
 
-/* We have to be careful with barriers: our devices are all run in separate
+/*
+ * We have to be careful with barriers: our devices are all run in separate
  * threads and so we need to make sure that changes visible to the Guest happen
- * in precise order. */
+ * in precise order.
+ */
 #define wmb() __asm__ __volatile__("" : : : "memory")
 #define mb() __asm__ __volatile__("" : : : "memory")
 
-/* Convert an iovec element to the given type.
+/*
+ * Convert an iovec element to the given type.
  *
  * This is a fairly ugly trick: we need to know the size of the type and
  * alignment requirement to check the pointer is kosher.  It's also nice to
  * have the name of the type in case we report failure.
  *
  * Typing those three things all the time is cumbersome and error prone, so we
- * have a macro which sets them all up and passes to the real function. */
+ * have a macro which sets them all up and passes to the real function.
+ */
 #define convert(iov, type) \
 	((type *)_convert((iov), sizeof(type), __alignof__(type), #type))
 
@@ -198,8 +204,10 @@ static void *_convert(struct iovec *iov, size_t size, size_t align,
 /* Wrapper for the last available index.  Makes it easier to change. */
 #define lg_last_avail(vq)	((vq)->last_avail_idx)
 
-/* The virtio configuration space is defined to be little-endian.  x86 is
- * little-endian too, but it's nice to be explicit so we have these helpers. */
+/*
+ * The virtio configuration space is defined to be little-endian.  x86 is
+ * little-endian too, but it's nice to be explicit so we have these helpers.
+ */
 #define cpu_to_le16(v16) (v16)
 #define cpu_to_le32(v32) (v32)
 #define cpu_to_le64(v64) (v64)
@@ -241,11 +249,12 @@ static u8 *get_feature_bits(struct device *dev)
 		+ dev->num_vq * sizeof(struct lguest_vqconfig);
 }
 
-/*L:100 The Launcher code itself takes us out into userspace, that scary place
- * where pointers run wild and free!  Unfortunately, like most userspace
- * programs, it's quite boring (which is why everyone likes to hack on the
- * kernel!).  Perhaps if you make up an Lguest Drinking Game at this point, it
- * will get you through this section.  Or, maybe not.
+/*L:100
+ * The Launcher code itself takes us out into userspace, that scary place where
+ * pointers run wild and free!  Unfortunately, like most userspace programs,
+ * it's quite boring (which is why everyone likes to hack on the kernel!).
+ * Perhaps if you make up an Lguest Drinking Game at this point, it will get
+ * you through this section.  Or, maybe not.
  *
  * The Launcher sets up a big chunk of memory to be the Guest's "physical"
  * memory and stores it in "guest_base".  In other words, Guest physical ==
@@ -253,7 +262,8 @@ static u8 *get_feature_bits(struct device *dev)
  *
  * This can be tough to get your head around, but usually it just means that we
  * use these trivial conversion functions when the Guest gives us it's
- * "physical" addresses: */
+ * "physical" addresses:
+ */
 static void *from_guest_phys(unsigned long addr)
 {
 	return guest_base + addr;
@@ -268,7 +278,8 @@ static unsigned long to_guest_phys(const void *addr)
  * Loading the Kernel.
  *
  * We start with couple of simple helper routines.  open_or_die() avoids
- * error-checking code cluttering the callers: */
+ * error-checking code cluttering the callers:
+ */
 static int open_or_die(const char *name, int flags)
 {
 	int fd = open(name, flags);
@@ -283,12 +294,19 @@ static void *map_zeroed_pages(unsigned int num)
 	int fd = open_or_die("/dev/zero", O_RDONLY);
 	void *addr;
 
-	/* We use a private mapping (ie. if we write to the page, it will be
-	 * copied). */
+	/*
+	 * We use a private mapping (ie. if we write to the page, it will be
+	 * copied).
+	 */
 	addr = mmap(NULL, getpagesize() * num,
 		    PROT_READ|PROT_WRITE|PROT_EXEC, MAP_PRIVATE, fd, 0);
 	if (addr == MAP_FAILED)
 		err(1, "Mmaping %u pages of /dev/zero", num);
+
+	/*
+	 * One neat mmap feature is that you can close the fd, and it
+	 * stays mapped.
+	 */
 	close(fd);
 
 	return addr;
@@ -305,20 +323,24 @@ static void *get_pages(unsigned int num)
 	return addr;
 }
 
-/* This routine is used to load the kernel or initrd.  It tries mmap, but if
+/*
+ * This routine is used to load the kernel or initrd.  It tries mmap, but if
  * that fails (Plan 9's kernel file isn't nicely aligned on page boundaries),
- * it falls back to reading the memory in. */
+ * it falls back to reading the memory in.
+ */
 static void map_at(int fd, void *addr, unsigned long offset, unsigned long len)
 {
 	ssize_t r;
 
-	/* We map writable even though for some segments are marked read-only.
+	/*
+	 * We map writable even though for some segments are marked read-only.
 	 * The kernel really wants to be writable: it patches its own
 	 * instructions.
 	 *
 	 * MAP_PRIVATE means that the page won't be copied until a write is
 	 * done to it.  This allows us to share untouched memory between
-	 * Guests. */
+	 * Guests.
+	 */
 	if (mmap(addr, len, PROT_READ|PROT_WRITE|PROT_EXEC,
 		 MAP_FIXED|MAP_PRIVATE, fd, offset) != MAP_FAILED)
 		return;
@@ -329,7 +351,8 @@ static void map_at(int fd, void *addr, unsigned long offset, unsigned long len)
 		err(1, "Reading offset %lu len %lu gave %zi", offset, len, r);
 }
 
-/* This routine takes an open vmlinux image, which is in ELF, and maps it into
+/*
+ * This routine takes an open vmlinux image, which is in ELF, and maps it into
  * the Guest memory.  ELF = Embedded Linking Format, which is the format used
  * by all modern binaries on Linux including the kernel.
  *
@@ -337,23 +360,28 @@ static void map_at(int fd, void *addr, unsigned long offset, unsigned long len)
  * address.  We use the physical address; the Guest will map itself to the
  * virtual address.
  *
- * We return the starting address. */
+ * We return the starting address.
+ */
 static unsigned long map_elf(int elf_fd, const Elf32_Ehdr *ehdr)
 {
 	Elf32_Phdr phdr[ehdr->e_phnum];
 	unsigned int i;
 
-	/* Sanity checks on the main ELF header: an x86 executable with a
-	 * reasonable number of correctly-sized program headers. */
+	/*
+	 * Sanity checks on the main ELF header: an x86 executable with a
+	 * reasonable number of correctly-sized program headers.
+	 */
 	if (ehdr->e_type != ET_EXEC
 	    || ehdr->e_machine != EM_386
 	    || ehdr->e_phentsize != sizeof(Elf32_Phdr)
 	    || ehdr->e_phnum < 1 || ehdr->e_phnum > 65536U/sizeof(Elf32_Phdr))
 		errx(1, "Malformed elf header");
 
-	/* An ELF executable contains an ELF header and a number of "program"
+	/*
+	 * An ELF executable contains an ELF header and a number of "program"
 	 * headers which indicate which parts ("segments") of the program to
-	 * load where. */
+	 * load where.
+	 */
 
 	/* We read in all the program headers at once: */
 	if (lseek(elf_fd, ehdr->e_phoff, SEEK_SET) < 0)
@@ -361,8 +389,10 @@ static unsigned long map_elf(int elf_fd, const Elf32_Ehdr *ehdr)
 	if (read(elf_fd, phdr, sizeof(phdr)) != sizeof(phdr))
 		err(1, "Reading program headers");
 
-	/* Try all the headers: there are usually only three.  A read-only one,
-	 * a read-write one, and a "note" section which we don't load. */
+	/*
+	 * Try all the headers: there are usually only three.  A read-only one,
+	 * a read-write one, and a "note" section which we don't load.
+	 */
 	for (i = 0; i < ehdr->e_phnum; i++) {
 		/* If this isn't a loadable segment, we ignore it */
 		if (phdr[i].p_type != PT_LOAD)
@@ -380,13 +410,15 @@ static unsigned long map_elf(int elf_fd, const Elf32_Ehdr *ehdr)
 	return ehdr->e_entry;
 }
 
-/*L:150 A bzImage, unlike an ELF file, is not meant to be loaded.  You're
- * supposed to jump into it and it will unpack itself.  We used to have to
- * perform some hairy magic because the unpacking code scared me.
+/*L:150
+ * A bzImage, unlike an ELF file, is not meant to be loaded.  You're supposed
+ * to jump into it and it will unpack itself.  We used to have to perform some
+ * hairy magic because the unpacking code scared me.
  *
  * Fortunately, Jeremy Fitzhardinge convinced me it wasn't that hard and wrote
  * a small patch to jump over the tricky bits in the Guest, so now we just read
- * the funky header so we know where in the file to load, and away we go! */
+ * the funky header so we know where in the file to load, and away we go!
+ */
 static unsigned long load_bzimage(int fd)
 {
 	struct boot_params boot;
@@ -394,8 +426,10 @@ static unsigned long load_bzimage(int fd)
 	/* Modern bzImages get loaded at 1M. */
 	void *p = from_guest_phys(0x100000);
 
-	/* Go back to the start of the file and read the header.  It should be
-	 * a Linux boot header (see Documentation/x86/i386/boot.txt) */
+	/*
+	 * Go back to the start of the file and read the header.  It should be
+	 * a Linux boot header (see Documentation/x86/i386/boot.txt)
+	 */
 	lseek(fd, 0, SEEK_SET);
 	read(fd, &boot, sizeof(boot));
 
@@ -414,9 +448,11 @@ static unsigned long load_bzimage(int fd)
 	return boot.hdr.code32_start;
 }
 
-/*L:140 Loading the kernel is easy when it's a "vmlinux", but most kernels
+/*L:140
+ * Loading the kernel is easy when it's a "vmlinux", but most kernels
  * come wrapped up in the self-decompressing "bzImage" format.  With a little
- * work, we can load those, too. */
+ * work, we can load those, too.
+ */
 static unsigned long load_kernel(int fd)
 {
 	Elf32_Ehdr hdr;
@@ -433,24 +469,28 @@ static unsigned long load_kernel(int fd)
 	return load_bzimage(fd);
 }
 
-/* This is a trivial little helper to align pages.  Andi Kleen hated it because
+/*
+ * This is a trivial little helper to align pages.  Andi Kleen hated it because
  * it calls getpagesize() twice: "it's dumb code."
  *
  * Kernel guys get really het up about optimization, even when it's not
- * necessary.  I leave this code as a reaction against that. */
+ * necessary.  I leave this code as a reaction against that.
+ */
 static inline unsigned long page_align(unsigned long addr)
 {
 	/* Add upwards and truncate downwards. */
 	return ((addr + getpagesize()-1) & ~(getpagesize()-1));
 }
 
-/*L:180 An "initial ram disk" is a disk image loaded into memory along with
- * the kernel which the kernel can use to boot from without needing any
- * drivers.  Most distributions now use this as standard: the initrd contains
- * the code to load the appropriate driver modules for the current machine.
+/*L:180
+ * An "initial ram disk" is a disk image loaded into memory along with the
+ * kernel which the kernel can use to boot from without needing any drivers.
+ * Most distributions now use this as standard: the initrd contains the code to
+ * load the appropriate driver modules for the current machine.
  *
  * Importantly, James Morris works for RedHat, and Fedora uses initrds for its
- * kernels.  He sent me this (and tells me when I break it). */
+ * kernels.  He sent me this (and tells me when I break it).
+ */
 static unsigned long load_initrd(const char *name, unsigned long mem)
 {
 	int ifd;
@@ -462,12 +502,16 @@ static unsigned long load_initrd(const char *name, unsigned long mem)
 	if (fstat(ifd, &st) < 0)
 		err(1, "fstat() on initrd '%s'", name);
 
-	/* We map the initrd at the top of memory, but mmap wants it to be
-	 * page-aligned, so we round the size up for that. */
+	/*
+	 * We map the initrd at the top of memory, but mmap wants it to be
+	 * page-aligned, so we round the size up for that.
+	 */
 	len = page_align(st.st_size);
 	map_at(ifd, from_guest_phys(mem - len), 0, st.st_size);
-	/* Once a file is mapped, you can close the file descriptor.  It's a
-	 * little odd, but quite useful. */
+	/*
+	 * Once a file is mapped, you can close the file descriptor.  It's a
+	 * little odd, but quite useful.
+	 */
 	close(ifd);
 	verbose("mapped initrd %s size=%lu @ %p\n", name, len, (void*)mem-len);
 
@@ -476,8 +520,10 @@ static unsigned long load_initrd(const char *name, unsigned long mem)
 }
 /*:*/
 
-/* Simple routine to roll all the commandline arguments together with spaces
- * between them. */
+/*
+ * Simple routine to roll all the commandline arguments together with spaces
+ * between them.
+ */
 static void concat(char *dst, char *args[])
 {
 	unsigned int i, len = 0;
@@ -494,10 +540,12 @@ static void concat(char *dst, char *args[])
 	dst[len] = '\0';
 }
 
-/*L:185 This is where we actually tell the kernel to initialize the Guest.  We
+/*L:185
+ * This is where we actually tell the kernel to initialize the Guest.  We
  * saw the arguments it expects when we looked at initialize() in lguest_user.c:
  * the base of Guest "physical" memory, the top physical page to allow and the
- * entry point for the Guest. */
+ * entry point for the Guest.
+ */
 static void tell_kernel(unsigned long start)
 {
 	unsigned long args[] = { LHREQ_INITIALIZE,
@@ -511,7 +559,7 @@ static void tell_kernel(unsigned long start)
 }
 /*:*/
 
-/*
+/*L:200
  * Device Handling.
  *
  * When the Guest gives us a buffer, it sends an array of addresses and sizes.
@@ -522,20 +570,26 @@ static void tell_kernel(unsigned long start)
 static void *_check_pointer(unsigned long addr, unsigned int size,
 			    unsigned int line)
 {
-	/* We have to separately check addr and addr+size, because size could
-	 * be huge and addr + size might wrap around. */
+	/*
+	 * We have to separately check addr and addr+size, because size could
+	 * be huge and addr + size might wrap around.
+	 */
 	if (addr >= guest_limit || addr + size >= guest_limit)
 		errx(1, "%s:%i: Invalid address %#lx", __FILE__, line, addr);
-	/* We return a pointer for the caller's convenience, now we know it's
-	 * safe to use. */
+	/*
+	 * We return a pointer for the caller's convenience, now we know it's
+	 * safe to use.
+	 */
 	return from_guest_phys(addr);
 }
 /* A macro which transparently hands the line number to the real function. */
 #define check_pointer(addr,size) _check_pointer(addr, size, __LINE__)
 
-/* Each buffer in the virtqueues is actually a chain of descriptors.  This
+/*
+ * Each buffer in the virtqueues is actually a chain of descriptors.  This
  * function returns the next descriptor in the chain, or vq->vring.num if we're
- * at the end. */
+ * at the end.
+ */
 static unsigned next_desc(struct vring_desc *desc,
 			  unsigned int i, unsigned int max)
 {
@@ -556,7 +610,10 @@ static unsigned next_desc(struct vring_desc *desc,
 	return next;
 }
 
-/* This actually sends the interrupt for this virtqueue */
+/*
+ * This actually sends the interrupt for this virtqueue, if we've used a
+ * buffer.
+ */
 static void trigger_irq(struct virtqueue *vq)
 {
 	unsigned long buf[] = { LHREQ_IRQ, vq->config.irq };
@@ -576,12 +633,14 @@ static void trigger_irq(struct virtqueue *vq)
 		err(1, "Triggering irq %i", vq->config.irq);
 }
 
-/* This looks in the virtqueue and for the first available buffer, and converts
+/*
+ * This looks in the virtqueue for the first available buffer, and converts
  * it to an iovec for convenient access.  Since descriptors consist of some
  * number of output then some number of input descriptors, it's actually two
  * iovecs, but we pack them into one and note how many of each there were.
  *
- * This function returns the descriptor number found. */
+ * This function waits if necessary, and returns the descriptor number found.
+ */
 static unsigned wait_for_vq_desc(struct virtqueue *vq,
 				 struct iovec iov[],
 				 unsigned int *out_num, unsigned int *in_num)
@@ -590,17 +649,23 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
 	struct vring_desc *desc;
 	u16 last_avail = lg_last_avail(vq);
 
+	/* There's nothing available? */
 	while (last_avail == vq->vring.avail->idx) {
 		u64 event;
 
-		/* OK, tell Guest about progress up to now. */
+		/*
+		 * Since we're about to sleep, now is a good time to tell the
+		 * Guest about what we've used up to now.
+		 */
 		trigger_irq(vq);
 
 		/* OK, now we need to know about added descriptors. */
 		vq->vring.used->flags &= ~VRING_USED_F_NO_NOTIFY;
 
-		/* They could have slipped one in as we were doing that: make
-		 * sure it's written, then check again. */
+		/*
+		 * They could have slipped one in as we were doing that: make
+		 * sure it's written, then check again.
+		 */
 		mb();
 		if (last_avail != vq->vring.avail->idx) {
 			vq->vring.used->flags |= VRING_USED_F_NO_NOTIFY;
@@ -620,8 +685,10 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
 		errx(1, "Guest moved used index from %u to %u",
 		     last_avail, vq->vring.avail->idx);
 
-	/* Grab the next descriptor number they're advertising, and increment
-	 * the index we've seen. */
+	/*
+	 * Grab the next descriptor number they're advertising, and increment
+	 * the index we've seen.
+	 */
 	head = vq->vring.avail->ring[last_avail % vq->vring.num];
 	lg_last_avail(vq)++;
 
@@ -636,8 +703,10 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
 	desc = vq->vring.desc;
 	i = head;
 
-	/* If this is an indirect entry, then this buffer contains a descriptor
-	 * table which we handle as if it's any normal descriptor chain. */
+	/*
+	 * If this is an indirect entry, then this buffer contains a descriptor
+	 * table which we handle as if it's any normal descriptor chain.
+	 */
 	if (desc[i].flags & VRING_DESC_F_INDIRECT) {
 		if (desc[i].len % sizeof(struct vring_desc))
 			errx(1, "Invalid size for indirect buffer table");
@@ -656,8 +725,10 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
 		if (desc[i].flags & VRING_DESC_F_WRITE)
 			(*in_num)++;
 		else {
-			/* If it's an output descriptor, they're all supposed
-			 * to come before any input descriptors. */
+			/*
+			 * If it's an output descriptor, they're all supposed
+			 * to come before any input descriptors.
+			 */
 			if (*in_num)
 				errx(1, "Descriptor has out after in");
 			(*out_num)++;
@@ -671,14 +742,19 @@ static unsigned wait_for_vq_desc(struct virtqueue *vq,
 	return head;
 }
 
-/* After we've used one of their buffers, we tell them about it.  We'll then
- * want to send them an interrupt, using trigger_irq(). */
+/*
+ * After we've used one of their buffers, we tell the Guest about it.  Sometime
+ * later we'll want to send them an interrupt using trigger_irq(); note that
+ * wait_for_vq_desc() does that for us if it has to wait.
+ */
 static void add_used(struct virtqueue *vq, unsigned int head, int len)
 {
 	struct vring_used_elem *used;
 
-	/* The virtqueue contains a ring of used buffers.  Get a pointer to the
-	 * next entry in that used ring. */
+	/*
+	 * The virtqueue contains a ring of used buffers.  Get a pointer to the
+	 * next entry in that used ring.
+	 */
 	used = &vq->vring.used->ring[vq->vring.used->idx % vq->vring.num];
 	used->id = head;
 	used->len = len;
@@ -698,9 +774,9 @@ static void add_used_and_trigger(struct virtqueue *vq, unsigned head, int len)
 /*
  * The Console
  *
- * We associate some data with the console for our exit hack. */
-struct console_abort
-{
+ * We associate some data with the console for our exit hack.
+ */
+struct console_abort {
 	/* How many times have they hit ^C? */
 	int count;
 	/* When did they start? */
@@ -715,30 +791,35 @@ static void console_input(struct virtqueue *vq)
 	struct console_abort *abort = vq->dev->priv;
 	struct iovec iov[vq->vring.num];
 
-	/* Make sure there's a descriptor waiting. */
+	/* Make sure there's a descriptor available. */
 	head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
 	if (out_num)
 		errx(1, "Output buffers in console in queue?");
 
-	/* Read it in. */
+	/* Read into it.  This is where we usually wait. */
 	len = readv(STDIN_FILENO, iov, in_num);
 	if (len <= 0) {
 		/* Ran out of input? */
 		warnx("Failed to get console input, ignoring console.");
-		/* For simplicity, dying threads kill the whole Launcher.  So
-		 * just nap here. */
+		/*
+		 * For simplicity, dying threads kill the whole Launcher.  So
+		 * just nap here.
+		 */
 		for (;;)
 			pause();
 	}
 
+	/* Tell the Guest we used a buffer. */
 	add_used_and_trigger(vq, head, len);
 
-	/* Three ^C within one second?  Exit.
+	/*
+	 * Three ^C within one second?  Exit.
 	 *
 	 * This is such a hack, but works surprisingly well.  Each ^C has to
 	 * be in a buffer by itself, so they can't be too fast.  But we check
 	 * that we get three within about a second, so they can't be too
-	 * slow. */
+	 * slow.
+	 */
 	if (len != 1 || ((char *)iov[0].iov_base)[0] != 3) {
 		abort->count = 0;
 		return;
@@ -763,15 +844,23 @@ static void console_output(struct virtqueue *vq)
 	unsigned int head, out, in;
 	struct iovec iov[vq->vring.num];
 
+	/* We usually wait in here, for the Guest to give us something. */
 	head = wait_for_vq_desc(vq, iov, &out, &in);
 	if (in)
 		errx(1, "Input buffers in console output queue?");
+
+	/* writev can return a partial write, so we loop here. */
 	while (!iov_empty(iov, out)) {
 		int len = writev(STDOUT_FILENO, iov, out);
 		if (len <= 0)
 			err(1, "Write to stdout gave %i", len);
 		iov_consume(iov, out, len);
 	}
+
+	/*
+	 * We're finished with that buffer: if we're going to sleep,
+	 * wait_for_vq_desc() will prod the Guest with an interrupt.
+	 */
 	add_used(vq, head, 0);
 }
 
@@ -791,15 +880,30 @@ static void net_output(struct virtqueue *vq)
 	unsigned int head, out, in;
 	struct iovec iov[vq->vring.num];
 
+	/* We usually wait in here for the Guest to give us a packet. */
 	head = wait_for_vq_desc(vq, iov, &out, &in);
 	if (in)
 		errx(1, "Input buffers in net output queue?");
+	/*
+	 * Send the whole thing through to /dev/net/tun.  It expects the exact
+	 * same format: what a coincidence!
+	 */
 	if (writev(net_info->tunfd, iov, out) < 0)
 		errx(1, "Write to tun failed?");
+
+	/*
+	 * Done with that one; wait_for_vq_desc() will send the interrupt if
+	 * all packets are processed.
+	 */
 	add_used(vq, head, 0);
 }
 
-/* Will reading from this file descriptor block? */
+/*
+ * Handling network input is a bit trickier, because I've tried to optimize it.
+ *
+ * First we have a helper routine which tells is if from this file descriptor
+ * (ie. the /dev/net/tun device) will block:
+ */
 static bool will_block(int fd)
 {
 	fd_set fdset;
@@ -809,8 +913,11 @@ static bool will_block(int fd)
 	return select(fd+1, &fdset, NULL, NULL, &zero) != 1;
 }
 
-/* This is where we handle packets coming in from the tun device to our
- * Guest. */
+/*
+ * This handles packets coming in from the tun device to our Guest.  Like all
+ * service routines, it gets called again as soon as it returns, so you don't
+ * see a while(1) loop here.
+ */
 static void net_input(struct virtqueue *vq)
 {
 	int len;
@@ -818,21 +925,38 @@ static void net_input(struct virtqueue *vq)
 	struct iovec iov[vq->vring.num];
 	struct net_info *net_info = vq->dev->priv;
 
+	/*
+	 * Get a descriptor to write an incoming packet into.  This will also
+	 * send an interrupt if they're out of descriptors.
+	 */
 	head = wait_for_vq_desc(vq, iov, &out, &in);
 	if (out)
 		errx(1, "Output buffers in net input queue?");
 
-	/* Deliver interrupt now, since we're about to sleep. */
+	/*
+	 * If it looks like we'll block reading from the tun device, send them
+	 * an interrupt.
+	 */
 	if (vq->pending_used && will_block(net_info->tunfd))
 		trigger_irq(vq);
 
+	/*
+	 * Read in the packet.  This is where we normally wait (when there's no
+	 * incoming network traffic).
+	 */
 	len = readv(net_info->tunfd, iov, in);
 	if (len <= 0)
 		err(1, "Failed to read from tun.");
+
+	/*
+	 * Mark that packet buffer as used, but don't interrupt here.  We want
+	 * to wait until we've done as much work as we can.
+	 */
 	add_used(vq, head, len);
 }
+/*:*/
 
-/* This is the helper to create threads. */
+/* This is the helper to create threads: run the service routine in a loop. */
 static int do_thread(void *_vq)
 {
 	struct virtqueue *vq = _vq;
@@ -842,8 +966,10 @@ static int do_thread(void *_vq)
 	return 0;
 }
 
-/* When a child dies, we kill our entire process group with SIGTERM.  This
- * also has the side effect that the shell restores the console for us! */
+/*
+ * When a child dies, we kill our entire process group with SIGTERM.  This
+ * also has the side effect that the shell restores the console for us!
+ */
 static void kill_launcher(int signal)
 {
 	kill(0, SIGTERM);
@@ -878,11 +1004,15 @@ static void reset_device(struct device *dev)
 	signal(SIGCHLD, (void *)kill_launcher);
 }
 
+/*L:216
+ * This actually creates the thread which services the virtqueue for a device.
+ */
 static void create_thread(struct virtqueue *vq)
 {
-	/* Create stack for thread and run it.  Since stack grows
-	 * upwards, we point the stack pointer to the end of this
-	 * region. */
+	/*
+	 * Create stack for thread.  Since the stack grows upwards, we point
+	 * the stack pointer to the end of this region.
+	 */
 	char *stack = malloc(32768);
 	unsigned long args[] = { LHREQ_EVENTFD,
 				 vq->config.pfn*getpagesize(), 0 };
@@ -893,17 +1023,22 @@ static void create_thread(struct virtqueue *vq)
 		err(1, "Creating eventfd");
 	args[2] = vq->eventfd;
 
-	/* Attach an eventfd to this virtqueue: it will go off
-	 * when the Guest does an LHCALL_NOTIFY for this vq. */
+	/*
+	 * Attach an eventfd to this virtqueue: it will go off when the Guest
+	 * does an LHCALL_NOTIFY for this vq.
+	 */
 	if (write(lguest_fd, &args, sizeof(args)) != 0)
 		err(1, "Attaching eventfd");
 
-	/* CLONE_VM: because it has to access the Guest memory, and
-	 * SIGCHLD so we get a signal if it dies. */
+	/*
+	 * CLONE_VM: because it has to access the Guest memory, and SIGCHLD so
+	 * we get a signal if it dies.
+	 */
 	vq->thread = clone(do_thread, stack + 32768, CLONE_VM | SIGCHLD, vq);
 	if (vq->thread == (pid_t)-1)
 		err(1, "Creating clone");
-	/* We close our local copy, now the child has it. */
+
+	/* We close our local copy now the child has it. */
 	close(vq->eventfd);
 }
 
@@ -955,7 +1090,10 @@ static void update_device_status(struct device *dev)
 	}
 }
 
-/* This is the generic routine we call when the Guest uses LHCALL_NOTIFY. */
+/*L:215
+ * This is the generic routine we call when the Guest uses LHCALL_NOTIFY.  In
+ * particular, it's used to notify us of device status changes during boot.
+ */
 static void handle_output(unsigned long addr)
 {
 	struct device *i;
@@ -964,25 +1102,42 @@ static void handle_output(unsigned long addr)
 	for (i = devices.dev; i; i = i->next) {
 		struct virtqueue *vq;
 
-		/* Notifications to device descriptors update device status. */
+		/*
+		 * Notifications to device descriptors mean they updated the
+		 * device status.
+		 */
 		if (from_guest_phys(addr) == i->desc) {
 			update_device_status(i);
 			return;
 		}
 
-		/* Devices *can* be used before status is set to DRIVER_OK. */
+		/*
+		 * Devices *can* be used before status is set to DRIVER_OK.
+		 * The original plan was that they would never do this: they
+		 * would always finish setting up their status bits before
+		 * actually touching the virtqueues.  In practice, we allowed
+		 * them to, and they do (eg. the disk probes for partition
+		 * tables as part of initialization).
+		 *
+		 * If we see this, we start the device: once it's running, we
+		 * expect the device to catch all the notifications.
+		 */
 		for (vq = i->vq; vq; vq = vq->next) {
 			if (addr != vq->config.pfn*getpagesize())
 				continue;
 			if (i->running)
 				errx(1, "Notification on running %s", i->name);
+			/* This just calls create_thread() for each virtqueue */
 			start_device(i);
 			return;
 		}
 	}
 
-	/* Early console write is done using notify on a nul-terminated string
-	 * in Guest memory. */
+	/*
+	 * Early console write is done using notify on a nul-terminated string
+	 * in Guest memory.  It's also great for hacking debugging messages
+	 * into a Guest.
+	 */
 	if (addr >= guest_limit)
 		errx(1, "Bad NOTIFY %#lx", addr);
 
@@ -998,10 +1153,12 @@ static void handle_output(unsigned long addr)
  * routines to allocate and manage them.
  */
 
-/* The layout of the device page is a "struct lguest_device_desc" followed by a
+/*
+ * The layout of the device page is a "struct lguest_device_desc" followed by a
  * number of virtqueue descriptors, then two sets of feature bits, then an
  * array of configuration bytes.  This routine returns the configuration
- * pointer. */
+ * pointer.
+ */
 static u8 *device_config(const struct device *dev)
 {
 	return (void *)(dev->desc + 1)
@@ -1009,9 +1166,11 @@ static u8 *device_config(const struct device *dev)
 		+ dev->feature_len * 2;
 }
 
-/* This routine allocates a new "struct lguest_device_desc" from descriptor
+/*
+ * This routine allocates a new "struct lguest_device_desc" from descriptor
  * table page just above the Guest's normal memory.  It returns a pointer to
- * that descriptor. */
+ * that descriptor.
+ */
 static struct lguest_device_desc *new_dev_desc(u16 type)
 {
 	struct lguest_device_desc d = { .type = type };
@@ -1032,8 +1191,10 @@ static struct lguest_device_desc *new_dev_desc(u16 type)
 	return memcpy(p, &d, sizeof(d));
 }
 
-/* Each device descriptor is followed by the description of its virtqueues.  We
- * specify how many descriptors the virtqueue is to have. */
+/*
+ * Each device descriptor is followed by the description of its virtqueues.  We
+ * specify how many descriptors the virtqueue is to have.
+ */
 static void add_virtqueue(struct device *dev, unsigned int num_descs,
 			  void (*service)(struct virtqueue *))
 {
@@ -1050,6 +1211,11 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
 	vq->next = NULL;
 	vq->last_avail_idx = 0;
 	vq->dev = dev;
+
+	/*
+	 * This is the routine the service thread will run, and its Process ID
+	 * once it's running.
+	 */
 	vq->service = service;
 	vq->thread = (pid_t)-1;
 
@@ -1061,10 +1227,12 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
 	/* Initialize the vring. */
 	vring_init(&vq->vring, num_descs, p, LGUEST_VRING_ALIGN);
 
-	/* Append virtqueue to this device's descriptor.  We use
+	/*
+	 * Append virtqueue to this device's descriptor.  We use
 	 * device_config() to get the end of the device's current virtqueues;
 	 * we check that we haven't added any config or feature information
-	 * yet, otherwise we'd be overwriting them. */
+	 * yet, otherwise we'd be overwriting them.
+	 */
 	assert(dev->desc->config_len == 0 && dev->desc->feature_len == 0);
 	memcpy(device_config(dev), &vq->config, sizeof(vq->config));
 	dev->num_vq++;
@@ -1072,14 +1240,18 @@ static void add_virtqueue(struct device *dev, unsigned int num_descs,
 
 	verbose("Virtqueue page %#lx\n", to_guest_phys(p));
 
-	/* Add to tail of list, so dev->vq is first vq, dev->vq->next is
-	 * second.  */
+	/*
+	 * Add to tail of list, so dev->vq is first vq, dev->vq->next is
+	 * second.
+	 */
 	for (i = &dev->vq; *i; i = &(*i)->next);
 	*i = vq;
 }
 
-/* The first half of the feature bitmask is for us to advertise features.  The
- * second half is for the Guest to accept features. */
+/*
+ * The first half of the feature bitmask is for us to advertise features.  The
+ * second half is for the Guest to accept features.
+ */
 static void add_feature(struct device *dev, unsigned bit)
 {
 	u8 *features = get_feature_bits(dev);
@@ -1093,9 +1265,11 @@ static void add_feature(struct device *dev, unsigned bit)
 	features[bit / CHAR_BIT] |= (1 << (bit % CHAR_BIT));
 }
 
-/* This routine sets the configuration fields for an existing device's
+/*
+ * This routine sets the configuration fields for an existing device's
  * descriptor.  It only works for the last device, but that's OK because that's
- * how we use it. */
+ * how we use it.
+ */
 static void set_config(struct device *dev, unsigned len, const void *conf)
 {
 	/* Check we haven't overflowed our single page. */
@@ -1105,12 +1279,18 @@ static void set_config(struct device *dev, unsigned len, const void *conf)
 	/* Copy in the config information, and store the length. */
 	memcpy(device_config(dev), conf, len);
 	dev->desc->config_len = len;
+
+	/* Size must fit in config_len field (8 bits)! */
+	assert(dev->desc->config_len == len);
 }
 
-/* This routine does all the creation and setup of a new device, including
- * calling new_dev_desc() to allocate the descriptor and device memory.
+/*
+ * This routine does all the creation and setup of a new device, including
+ * calling new_dev_desc() to allocate the descriptor and device memory.  We
+ * don't actually start the service threads until later.
  *
- * See what I mean about userspace being boring? */
+ * See what I mean about userspace being boring?
+ */
 static struct device *new_device(const char *name, u16 type)
 {
 	struct device *dev = malloc(sizeof(*dev));
@@ -1123,10 +1303,12 @@ static struct device *new_device(const char *name, u16 type)
 	dev->num_vq = 0;
 	dev->running = false;
 
-	/* Append to device list.  Prepending to a single-linked list is
+	/*
+	 * Append to device list.  Prepending to a single-linked list is
 	 * easier, but the user expects the devices to be arranged on the bus
 	 * in command-line order.  The first network device on the command line
-	 * is eth0, the first block device /dev/vda, etc. */
+	 * is eth0, the first block device /dev/vda, etc.
+	 */
 	if (devices.lastdev)
 		devices.lastdev->next = dev;
 	else
@@ -1136,8 +1318,10 @@ static struct device *new_device(const char *name, u16 type)
 	return dev;
 }
 
-/* Our first setup routine is the console.  It's a fairly simple device, but
- * UNIX tty handling makes it uglier than it could be. */
+/*
+ * Our first setup routine is the console.  It's a fairly simple device, but
+ * UNIX tty handling makes it uglier than it could be.
+ */
 static void setup_console(void)
 {
 	struct device *dev;
@@ -1145,8 +1329,10 @@ static void setup_console(void)
 	/* If we can save the initial standard input settings... */
 	if (tcgetattr(STDIN_FILENO, &orig_term) == 0) {
 		struct termios term = orig_term;
-		/* Then we turn off echo, line buffering and ^C etc.  We want a
-		 * raw input stream to the Guest. */
+		/*
+		 * Then we turn off echo, line buffering and ^C etc: We want a
+		 * raw input stream to the Guest.
+		 */
 		term.c_lflag &= ~(ISIG|ICANON|ECHO);
 		tcsetattr(STDIN_FILENO, TCSANOW, &term);
 	}
@@ -1157,10 +1343,12 @@ static void setup_console(void)
 	dev->priv = malloc(sizeof(struct console_abort));
 	((struct console_abort *)dev->priv)->count = 0;
 
-	/* The console needs two virtqueues: the input then the output.  When
+	/*
+	 * The console needs two virtqueues: the input then the output.  When
 	 * they put something the input queue, we make sure we're listening to
 	 * stdin.  When they put something in the output queue, we write it to
-	 * stdout. */
+	 * stdout.
+	 */
 	add_virtqueue(dev, VIRTQUEUE_NUM, console_input);
 	add_virtqueue(dev, VIRTQUEUE_NUM, console_output);
 
@@ -1168,7 +1356,8 @@ static void setup_console(void)
 }
 /*:*/
 
-/*M:010 Inter-guest networking is an interesting area.  Simplest is to have a
+/*M:010
+ * Inter-guest networking is an interesting area.  Simplest is to have a
  * --sharenet=<name> option which opens or creates a named pipe.  This can be
  * used to send packets to another guest in a 1:1 manner.
  *
@@ -1182,7 +1371,8 @@ static void setup_console(void)
  * multiple inter-guest channels behind one interface, although it would
  * require some manner of hotplugging new virtio channels.
  *
- * Finally, we could implement a virtio network switch in the kernel. :*/
+ * Finally, we could implement a virtio network switch in the kernel.
+:*/
 
 static u32 str2ip(const char *ipaddr)
 {
@@ -1207,11 +1397,13 @@ static void str2mac(const char *macaddr, unsigned char mac[6])
 	mac[5] = m[5];
 }
 
-/* This code is "adapted" from libbridge: it attaches the Host end of the
+/*
+ * This code is "adapted" from libbridge: it attaches the Host end of the
  * network device to the bridge device specified by the command line.
  *
  * This is yet another James Morris contribution (I'm an IP-level guy, so I
- * dislike bridging), and I just try not to break it. */
+ * dislike bridging), and I just try not to break it.
+ */
 static void add_to_bridge(int fd, const char *if_name, const char *br_name)
 {
 	int ifidx;
@@ -1231,9 +1423,11 @@ static void add_to_bridge(int fd, const char *if_name, const char *br_name)
 		err(1, "can't add %s to bridge %s", if_name, br_name);
 }
 
-/* This sets up the Host end of the network device with an IP address, brings
+/*
+ * This sets up the Host end of the network device with an IP address, brings
  * it up so packets will flow, the copies the MAC address into the hwaddr
- * pointer. */
+ * pointer.
+ */
 static void configure_device(int fd, const char *tapif, u32 ipaddr)
 {
 	struct ifreq ifr;
@@ -1260,10 +1454,12 @@ static int get_tun_device(char tapif[IFNAMSIZ])
 	/* Start with this zeroed.  Messy but sure. */
 	memset(&ifr, 0, sizeof(ifr));
 
-	/* We open the /dev/net/tun device and tell it we want a tap device.  A
+	/*
+	 * We open the /dev/net/tun device and tell it we want a tap device.  A
 	 * tap device is like a tun device, only somehow different.  To tell
 	 * the truth, I completely blundered my way through this code, but it
-	 * works now! */
+	 * works now!
+	 */
 	netfd = open_or_die("/dev/net/tun", O_RDWR);
 	ifr.ifr_flags = IFF_TAP | IFF_NO_PI | IFF_VNET_HDR;
 	strcpy(ifr.ifr_name, "tap%d");
@@ -1274,18 +1470,22 @@ static int get_tun_device(char tapif[IFNAMSIZ])
 		  TUN_F_CSUM|TUN_F_TSO4|TUN_F_TSO6|TUN_F_TSO_ECN) != 0)
 		err(1, "Could not set features for tun device");
 
-	/* We don't need checksums calculated for packets coming in this
-	 * device: trust us! */
+	/*
+	 * We don't need checksums calculated for packets coming in this
+	 * device: trust us!
+	 */
 	ioctl(netfd, TUNSETNOCSUM, 1);
 
 	memcpy(tapif, ifr.ifr_name, IFNAMSIZ);
 	return netfd;
 }
 
-/*L:195 Our network is a Host<->Guest network.  This can either use bridging or
+/*L:195
+ * Our network is a Host<->Guest network.  This can either use bridging or
  * routing, but the principle is the same: it uses the "tun" device to inject
  * packets into the Host as if they came in from a normal network card.  We
- * just shunt packets between the Guest and the tun device. */
+ * just shunt packets between the Guest and the tun device.
+ */
 static void setup_tun_net(char *arg)
 {
 	struct device *dev;
@@ -1302,13 +1502,14 @@ static void setup_tun_net(char *arg)
 	dev = new_device("net", VIRTIO_ID_NET);
 	dev->priv = net_info;
 
-	/* Network devices need a receive and a send queue, just like
-	 * console. */
+	/* Network devices need a recv and a send queue, just like console. */
 	add_virtqueue(dev, VIRTQUEUE_NUM, net_input);
 	add_virtqueue(dev, VIRTQUEUE_NUM, net_output);
 
-	/* We need a socket to perform the magic network ioctls to bring up the
-	 * tap interface, connect to the bridge etc.  Any socket will do! */
+	/*
+	 * We need a socket to perform the magic network ioctls to bring up the
+	 * tap interface, connect to the bridge etc.  Any socket will do!
+	 */
 	ipfd = socket(PF_INET, SOCK_DGRAM, IPPROTO_IP);
 	if (ipfd < 0)
 		err(1, "opening IP socket");
@@ -1362,39 +1563,31 @@ static void setup_tun_net(char *arg)
 		verbose("device %u: tun %s: %s\n",
 			devices.device_num, tapif, arg);
 }
-
-/* Our block (disk) device should be really simple: the Guest asks for a block
- * number and we read or write that position in the file.  Unfortunately, that
- * was amazingly slow: the Guest waits until the read is finished before
- * running anything else, even if it could have been doing useful work.
- *
- * We could use async I/O, except it's reputed to suck so hard that characters
- * actually go missing from your code when you try to use it.
- *
- * So we farm the I/O out to thread, and communicate with it via a pipe. */
+/*:*/
 
 /* This hangs off device->priv. */
-struct vblk_info
-{
+struct vblk_info {
 	/* The size of the file. */
 	off64_t len;
 
 	/* The file descriptor for the file. */
 	int fd;
 
-	/* IO thread listens on this file descriptor [0]. */
-	int workpipe[2];
-
-	/* IO thread writes to this file descriptor to mark it done, then
-	 * Launcher triggers interrupt to Guest. */
-	int done_fd;
 };
 
 /*L:210
  * The Disk
  *
- * Remember that the block device is handled by a separate I/O thread.  We head
- * straight into the core of that thread here:
+ * The disk only has one virtqueue, so it only has one thread.  It is really
+ * simple: the Guest asks for a block number and we read or write that position
+ * in the file.
+ *
+ * Before we serviced each virtqueue in a separate thread, that was unacceptably
+ * slow: the Guest waits until the read is finished before running anything
+ * else, even if it could have been doing useful work.
+ *
+ * We could have used async I/O, except it's reputed to suck so hard that
+ * characters actually go missing from your code when you try to use it.
  */
 static void blk_request(struct virtqueue *vq)
 {
@@ -1406,47 +1599,64 @@ static void blk_request(struct virtqueue *vq)
 	struct iovec iov[vq->vring.num];
 	off64_t off;
 
-	/* Get the next request. */
+	/*
+	 * Get the next request, where we normally wait.  It triggers the
+	 * interrupt to acknowledge previously serviced requests (if any).
+	 */
 	head = wait_for_vq_desc(vq, iov, &out_num, &in_num);
 
-	/* Every block request should contain at least one output buffer
+	/*
+	 * Every block request should contain at least one output buffer
 	 * (detailing the location on disk and the type of request) and one
-	 * input buffer (to hold the result). */
+	 * input buffer (to hold the result).
+	 */
 	if (out_num == 0 || in_num == 0)
 		errx(1, "Bad virtblk cmd %u out=%u in=%u",
 		     head, out_num, in_num);
 
 	out = convert(&iov[0], struct virtio_blk_outhdr);
 	in = convert(&iov[out_num+in_num-1], u8);
+	/*
+	 * For historical reasons, block operations are expressed in 512 byte
+	 * "sectors".
+	 */
 	off = out->sector * 512;
 
-	/* The block device implements "barriers", where the Guest indicates
+	/*
+	 * The block device implements "barriers", where the Guest indicates
 	 * that it wants all previous writes to occur before this write.  We
 	 * don't have a way of asking our kernel to do a barrier, so we just
-	 * synchronize all the data in the file.  Pretty poor, no? */
+	 * synchronize all the data in the file.  Pretty poor, no?
+	 */
 	if (out->type & VIRTIO_BLK_T_BARRIER)
 		fdatasync(vblk->fd);
 
-	/* In general the virtio block driver is allowed to try SCSI commands.
-	 * It'd be nice if we supported eject, for example, but we don't. */
+	/*
+	 * In general the virtio block driver is allowed to try SCSI commands.
+	 * It'd be nice if we supported eject, for example, but we don't.
+	 */
 	if (out->type & VIRTIO_BLK_T_SCSI_CMD) {
 		fprintf(stderr, "Scsi commands unsupported\n");
 		*in = VIRTIO_BLK_S_UNSUPP;
 		wlen = sizeof(*in);
 	} else if (out->type & VIRTIO_BLK_T_OUT) {
-		/* Write */
-
-		/* Move to the right location in the block file.  This can fail
-		 * if they try to write past end. */
+		/*
+		 * Write
+		 *
+		 * Move to the right location in the block file.  This can fail
+		 * if they try to write past end.
+		 */
 		if (lseek64(vblk->fd, off, SEEK_SET) != off)
 			err(1, "Bad seek to sector %llu", out->sector);
 
 		ret = writev(vblk->fd, iov+1, out_num-1);
 		verbose("WRITE to sector %llu: %i\n", out->sector, ret);
 
-		/* Grr... Now we know how long the descriptor they sent was, we
+		/*
+		 * Grr... Now we know how long the descriptor they sent was, we
 		 * make sure they didn't try to write over the end of the block
-		 * file (possibly extending it). */
+		 * file (possibly extending it).
+		 */
 		if (ret > 0 && off + ret > vblk->len) {
 			/* Trim it back to the correct length */
 			ftruncate64(vblk->fd, vblk->len);
@@ -1456,10 +1666,12 @@ static void blk_request(struct virtqueue *vq)
 		wlen = sizeof(*in);
 		*in = (ret >= 0 ? VIRTIO_BLK_S_OK : VIRTIO_BLK_S_IOERR);
 	} else {
-		/* Read */
-
-		/* Move to the right location in the block file.  This can fail
-		 * if they try to read past end. */
+		/*
+		 * Read
+		 *
+		 * Move to the right location in the block file.  This can fail
+		 * if they try to read past end.
+		 */
 		if (lseek64(vblk->fd, off, SEEK_SET) != off)
 			err(1, "Bad seek to sector %llu", out->sector);
 
@@ -1474,13 +1686,16 @@ static void blk_request(struct virtqueue *vq)
 		}
 	}
 
-	/* OK, so we noted that it was pretty poor to use an fdatasync as a
+	/*
+	 * OK, so we noted that it was pretty poor to use an fdatasync as a
 	 * barrier.  But Christoph Hellwig points out that we need a sync
 	 * *afterwards* as well: "Barriers specify no reordering to the front
-	 * or the back."  And Jens Axboe confirmed it, so here we are: */
+	 * or the back."  And Jens Axboe confirmed it, so here we are:
+	 */
 	if (out->type & VIRTIO_BLK_T_BARRIER)
 		fdatasync(vblk->fd);
 
+	/* Finished that request. */
 	add_used(vq, head, wlen);
 }
 
@@ -1491,7 +1706,7 @@ static void setup_block_file(const char *filename)
 	struct vblk_info *vblk;
 	struct virtio_blk_config conf;
 
-	/* The device responds to return from I/O thread. */
+	/* Creat the device. */
 	dev = new_device("block", VIRTIO_ID_BLOCK);
 
 	/* The device has one virtqueue, where the Guest places requests. */
@@ -1510,27 +1725,32 @@ static void setup_block_file(const char *filename)
 	/* Tell Guest how many sectors this device has. */
 	conf.capacity = cpu_to_le64(vblk->len / 512);
 
-	/* Tell Guest not to put in too many descriptors at once: two are used
-	 * for the in and out elements. */
+	/*
+	 * Tell Guest not to put in too many descriptors at once: two are used
+	 * for the in and out elements.
+	 */
 	add_feature(dev, VIRTIO_BLK_F_SEG_MAX);
 	conf.seg_max = cpu_to_le32(VIRTQUEUE_NUM - 2);
 
-	set_config(dev, sizeof(conf), &conf);
+	/* Don't try to put whole struct: we have 8 bit limit. */
+	set_config(dev, offsetof(struct virtio_blk_config, geometry), &conf);
 
 	verbose("device %u: virtblock %llu sectors\n",
 		++devices.device_num, le64_to_cpu(conf.capacity));
 }
 
-struct rng_info {
-	int rfd;
-};
-
-/* Our random number generator device reads from /dev/random into the Guest's
+/*L:211
+ * Our random number generator device reads from /dev/random into the Guest's
  * input buffers.  The usual case is that the Guest doesn't want random numbers
  * and so has no buffers although /dev/random is still readable, whereas
  * console is the reverse.
  *
- * The same logic applies, however. */
+ * The same logic applies, however.
+ */
+struct rng_info {
+	int rfd;
+};
+
 static void rng_input(struct virtqueue *vq)
 {
 	int len;
@@ -1543,9 +1763,10 @@ static void rng_input(struct virtqueue *vq)
 	if (out_num)
 		errx(1, "Output buffers in rng?");
 
-	/* This is why we convert to iovecs: the readv() call uses them, and so
-	 * it reads straight into the Guest's buffer.  We loop to make sure we
-	 * fill it. */
+	/*
+	 * Just like the console write, we loop to cover the whole iovec.
+	 * In this case, short reads actually happen quite a bit.
+	 */
 	while (!iov_empty(iov, in_num)) {
 		len = readv(rng_info->rfd, iov, in_num);
 		if (len <= 0)
@@ -1558,15 +1779,18 @@ static void rng_input(struct virtqueue *vq)
 	add_used(vq, head, totlen);
 }
 
-/* And this creates a "hardware" random number device for the Guest. */
+/*L:199
+ * This creates a "hardware" random number device for the Guest.
+ */
 static void setup_rng(void)
 {
 	struct device *dev;
 	struct rng_info *rng_info = malloc(sizeof(*rng_info));
 
+	/* Our device's privat info simply contains the /dev/random fd. */
 	rng_info->rfd = open_or_die("/dev/random", O_RDONLY);
 
-	/* The device responds to return from I/O thread. */
+	/* Create the new device. */
 	dev = new_device("rng", VIRTIO_ID_RNG);
 	dev->priv = rng_info;
 
@@ -1582,8 +1806,10 @@ static void __attribute__((noreturn)) restart_guest(void)
 {
 	unsigned int i;
 
-	/* Since we don't track all open fds, we simply close everything beyond
-	 * stderr. */
+	/*
+	 * Since we don't track all open fds, we simply close everything beyond
+	 * stderr.
+	 */
 	for (i = 3; i < FD_SETSIZE; i++)
 		close(i);
 
@@ -1594,8 +1820,10 @@ static void __attribute__((noreturn)) restart_guest(void)
 	err(1, "Could not exec %s", main_args[0]);
 }
 
-/*L:220 Finally we reach the core of the Launcher which runs the Guest, serves
- * its input and output, and finally, lays it to rest. */
+/*L:220
+ * Finally we reach the core of the Launcher which runs the Guest, serves
+ * its input and output, and finally, lays it to rest.
+ */
 static void __attribute__((noreturn)) run_guest(void)
 {
 	for (;;) {
@@ -1630,7 +1858,7 @@ static void __attribute__((noreturn)) run_guest(void)
  *
  * Are you ready?  Take a deep breath and join me in the core of the Host, in
  * "make Host".
- :*/
+:*/
 
 static struct option opts[] = {
 	{ "verbose", 0, NULL, 'v' },
@@ -1651,8 +1879,7 @@ static void usage(void)
 /*L:105 The main routine is where the real work begins: */
 int main(int argc, char *argv[])
 {
-	/* Memory, top-level pagetable, code startpoint and size of the
-	 * (optional) initrd. */
+	/* Memory, code startpoint and size of the (optional) initrd. */
 	unsigned long mem = 0, start, initrd_size = 0;
 	/* Two temporaries. */
 	int i, c;
@@ -1664,24 +1891,32 @@ int main(int argc, char *argv[])
 	/* Save the args: we "reboot" by execing ourselves again. */
 	main_args = argv;
 
-	/* First we initialize the device list.  We keep a pointer to the last
+	/*
+	 * First we initialize the device list.  We keep a pointer to the last
 	 * device, and the next interrupt number to use for devices (1:
-	 * remember that 0 is used by the timer). */
+	 * remember that 0 is used by the timer).
+	 */
 	devices.lastdev = NULL;
 	devices.next_irq = 1;
 
+	/* We're CPU 0.  In fact, that's the only CPU possible right now. */
 	cpu_id = 0;
-	/* We need to know how much memory so we can set up the device
+
+	/*
+	 * We need to know how much memory so we can set up the device
 	 * descriptor and memory pages for the devices as we parse the command
 	 * line.  So we quickly look through the arguments to find the amount
-	 * of memory now. */
+	 * of memory now.
+	 */
 	for (i = 1; i < argc; i++) {
 		if (argv[i][0] != '-') {
 			mem = atoi(argv[i]) * 1024 * 1024;
-			/* We start by mapping anonymous pages over all of
+			/*
+			 * We start by mapping anonymous pages over all of
 			 * guest-physical memory range.  This fills it with 0,
 			 * and ensures that the Guest won't be killed when it
-			 * tries to access it. */
+			 * tries to access it.
+			 */
 			guest_base = map_zeroed_pages(mem / getpagesize()
 						      + DEVICE_PAGES);
 			guest_limit = mem;
@@ -1714,8 +1949,10 @@ int main(int argc, char *argv[])
 			usage();
 		}
 	}
-	/* After the other arguments we expect memory and kernel image name,
-	 * followed by command line arguments for the kernel. */
+	/*
+	 * After the other arguments we expect memory and kernel image name,
+	 * followed by command line arguments for the kernel.
+	 */
 	if (optind + 2 > argc)
 		usage();
 
@@ -1733,20 +1970,26 @@ int main(int argc, char *argv[])
 	/* Map the initrd image if requested (at top of physical memory) */
 	if (initrd_name) {
 		initrd_size = load_initrd(initrd_name, mem);
-		/* These are the location in the Linux boot header where the
-		 * start and size of the initrd are expected to be found. */
+		/*
+		 * These are the location in the Linux boot header where the
+		 * start and size of the initrd are expected to be found.
+		 */
 		boot->hdr.ramdisk_image = mem - initrd_size;
 		boot->hdr.ramdisk_size = initrd_size;
 		/* The bootloader type 0xFF means "unknown"; that's OK. */
 		boot->hdr.type_of_loader = 0xFF;
 	}
 
-	/* The Linux boot header contains an "E820" memory map: ours is a
-	 * simple, single region. */
+	/*
+	 * The Linux boot header contains an "E820" memory map: ours is a
+	 * simple, single region.
+	 */
 	boot->e820_entries = 1;
 	boot->e820_map[0] = ((struct e820entry) { 0, mem, E820_RAM });
-	/* The boot header contains a command line pointer: we put the command
-	 * line after the boot header. */
+	/*
+	 * The boot header contains a command line pointer: we put the command
+	 * line after the boot header.
+	 */
 	boot->hdr.cmd_line_ptr = to_guest_phys(boot + 1);
 	/* We use a simple helper to copy the arguments separated by spaces. */
 	concat((char *)(boot + 1), argv+optind+2);
@@ -1760,11 +2003,13 @@ int main(int argc, char *argv[])
 	/* Tell the entry path not to try to reload segment registers. */
 	boot->hdr.loadflags |= KEEP_SEGMENTS;
 
-	/* We tell the kernel to initialize the Guest: this returns the open
-	 * /dev/lguest file descriptor. */
+	/*
+	 * We tell the kernel to initialize the Guest: this returns the open
+	 * /dev/lguest file descriptor.
+	 */
 	tell_kernel(start);
 
-	/* Ensure that we terminate if a child dies. */
+	/* Ensure that we terminate if a device-servicing child dies. */
 	signal(SIGCHLD, kill_launcher);
 
 	/* If we exit via err(), this kills all the threads, restores tty. */
diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt
index 381908d..719a819 100644
--- a/Documentation/sound/alsa/Procfile.txt
+++ b/Documentation/sound/alsa/Procfile.txt
@@ -101,6 +101,8 @@ card*/pcm*/xrun_debug
 	  bit 0 = Enable XRUN/jiffies debug messages
 	  bit 1 = Show stack trace at XRUN / jiffies check
 	  bit 2 = Enable additional jiffies check
+	  bit 3 = Log hwptr update at each period interrupt
+	  bit 4 = Log hwptr update at each snd_pcm_update_hw_ptr()
 
 	When the bit 0 is set, the driver will show the messages to
 	kernel log when an xrun is detected.  The debug message is
@@ -117,6 +119,9 @@ card*/pcm*/xrun_debug
 	buggy) hardware that doesn't give smooth pointer updates.
 	This feature is enabled via the bit 2.
 
+	Bits 3 and 4 are for logging the hwptr records.  Note that
+	these will give flood of kernel messages.
+
 card*/pcm*/sub*/info
 	The general information of this PCM sub-stream.
 
diff --git a/Documentation/sysrq.txt b/Documentation/sysrq.txt
index cf42b82..d56a017 100644
--- a/Documentation/sysrq.txt
+++ b/Documentation/sysrq.txt
@@ -66,7 +66,8 @@ On all -  write a character to /proc/sysrq-trigger.  e.g.:
 'b'     - Will immediately reboot the system without syncing or unmounting
           your disks.
 
-'c'	- Will perform a kexec reboot in order to take a crashdump.
+'c'	- Will perform a system crash by a NULL pointer dereference.
+          A crashdump will be taken if configured.
 
 'd'	- Shows all locks that are held.
 
@@ -141,8 +142,8 @@ useful when you want to exit a program that will not let you switch consoles.
 re'B'oot is good when you're unable to shut down. But you should also 'S'ync
 and 'U'mount first.
 
-'C'rashdump can be used to manually trigger a crashdump when the system is hung.
-The kernel needs to have been built with CONFIG_KEXEC enabled.
+'C'rash can be used to manually trigger a crashdump when the system is hung.
+Note that this just triggers a crash if there is no dump mechanism available.
 
 'S'ync is great when your system is locked up, it allows you to sync your
 disks and will certainly lessen the chance of data loss and fscking. Note
diff --git a/Documentation/video4linux/CARDLIST.em28xx b/Documentation/video4linux/CARDLIST.em28xx
index 014d255..68c236c 100644
--- a/Documentation/video4linux/CARDLIST.em28xx
+++ b/Documentation/video4linux/CARDLIST.em28xx
@@ -20,7 +20,7 @@
  19 -> EM2860/SAA711X Reference Design          (em2860)
  20 -> AMD ATI TV Wonder HD 600                 (em2880)        [0438:b002]
  21 -> eMPIA Technology, Inc. GrabBeeX+ Video Encoder (em2800)        [eb1a:2801]
- 22 -> Unknown EM2750/EM2751 webcam grabber     (em2750)        [eb1a:2750,eb1a:2751]
+ 22 -> EM2710/EM2750/EM2751 webcam grabber      (em2750)        [eb1a:2750,eb1a:2751]
  23 -> Huaqi DLCW-130                           (em2750)
  24 -> D-Link DUB-T210 TV Tuner                 (em2820/em2840) [2001:f112]
  25 -> Gadmei UTV310                            (em2820/em2840)
diff --git a/Documentation/video4linux/gspca.txt b/Documentation/video4linux/gspca.txt
index 2bcf788..573f95b 100644
--- a/Documentation/video4linux/gspca.txt
+++ b/Documentation/video4linux/gspca.txt
@@ -44,7 +44,9 @@ zc3xx		0458:7007	Genius VideoCam V2
 zc3xx		0458:700c	Genius VideoCam V3
 zc3xx		0458:700f	Genius VideoCam Web V2
 sonixj		0458:7025	Genius Eye 311Q
+sn9c20x		0458:7029	Genius Look 320s
 sonixj		0458:702e	Genius Slim 310 NB
+sn9c20x		045e:00f4	LifeCam VX-6000 (SN9C20x + OV9650)
 sonixj		045e:00f5	MicroSoft VX3000
 sonixj		045e:00f7	MicroSoft VX1000
 ov519		045e:028c	Micro$oft xbox cam
@@ -282,6 +284,28 @@ sonixj		0c45:613a	Microdia Sonix PC Camera
 sonixj		0c45:613b	Surfer SN-206
 sonixj		0c45:613c	Sonix Pccam168
 sonixj		0c45:6143	Sonix Pccam168
+sn9c20x		0c45:6240	PC Camera (SN9C201 + MT9M001)
+sn9c20x		0c45:6242	PC Camera (SN9C201 + MT9M111)
+sn9c20x		0c45:6248	PC Camera (SN9C201 + OV9655)
+sn9c20x		0c45:624e	PC Camera (SN9C201 + SOI968)
+sn9c20x		0c45:624f	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6251	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6253	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6260	PC Camera (SN9C201 + OV7670)
+sn9c20x		0c45:6270	PC Camera (SN9C201 + MT9V011/MT9V111/MT9V112)
+sn9c20x		0c45:627b	PC Camera (SN9C201 + OV7660)
+sn9c20x		0c45:627c	PC Camera (SN9C201 + HV7131R)
+sn9c20x		0c45:627f	PC Camera (SN9C201 + OV9650)
+sn9c20x		0c45:6280	PC Camera (SN9C202 + MT9M001)
+sn9c20x		0c45:6282	PC Camera (SN9C202 + MT9M111)
+sn9c20x		0c45:6288	PC Camera (SN9C202 + OV9655)
+sn9c20x		0c45:628e	PC Camera (SN9C202 + SOI968)
+sn9c20x		0c45:628f	PC Camera (SN9C202 + OV9650)
+sn9c20x		0c45:62a0	PC Camera (SN9C202 + OV7670)
+sn9c20x		0c45:62b0	PC Camera (SN9C202 + MT9V011/MT9V111/MT9V112)
+sn9c20x		0c45:62b3	PC Camera (SN9C202 + OV9655)
+sn9c20x		0c45:62bb	PC Camera (SN9C202 + OV7660)
+sn9c20x		0c45:62bc	PC Camera (SN9C202 + HV7131R)
 sunplus		0d64:0303	Sunplus FashionCam DXG
 etoms		102c:6151	Qcam Sangha CIF
 etoms		102c:6251	Qcam xxxxxx VGA
@@ -290,6 +314,7 @@ spca561		10fd:7e50	FlyCam Usb 100
 zc3xx		10fd:8050	Typhoon Webshot II USB 300k
 ov534		1415:2000	Sony HD Eye for PS3 (SLEH 00201)
 pac207		145f:013a	Trust WB-1300N
+sn9c20x		145f:013d	Trust WB-3600R
 vc032x		15b8:6001	HP 2.0 Megapixel
 vc032x		15b8:6002	HP 2.0 Megapixel rz406aa
 spca501		1776:501c	Arowana 300K CMOS Camera
@@ -300,4 +325,11 @@ spca500		2899:012c	Toptro Industrial
 spca508		8086:0110	Intel Easy PC Camera
 spca500		8086:0630	Intel Pocket PC Camera
 spca506		99fa:8988	Grandtec V.cap
+sn9c20x		a168:0610	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0611	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0613	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0618	Dino-Lite Digital Microscope (SN9C201 + HV7131R)
+sn9c20x		a168:0614	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
+sn9c20x		a168:0615	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
+sn9c20x		a168:0617	Dino-Lite Digital Microscope (SN9C201 + MT9M111)
 spca561		abcd:cdee	Petcam
diff --git a/MAINTAINERS b/MAINTAINERS
index ebc2691..d6befb2 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -73,8 +73,8 @@ Note: For the hard of thinking, this list is meant to remain in alphabetical
 order. If you could add yourselves to it in alphabetical order that would be
 so much easier [Ed]
 
-P: Person
-M: Mail patches to
+P: Person (obsolete)
+M: Mail patches to: FullName <address@domain>
 L: Mailing list that is relevant to this area
 W: Web-page with status/info
 T: SCM tree type and location.  Type is one of: git, hg, quilt, stgit.
@@ -104,88 +104,74 @@ X: Files and directories that are NOT maintained, same rules as F:
    matches all files in and below net excluding net/ipv6/
 
 3C505 NETWORK DRIVER
-P:	Philip Blundell
-M:	philb@gnu.org
+M:	Philip Blundell <philb@gnu.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/3c505*
 
 3C59X NETWORK DRIVER
-P:	Steffen Klassert
-M:	klassert@mathematik.tu-chemnitz.de
+M:	Steffen Klassert <klassert@mathematik.tu-chemnitz.de>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	Documentation/networking/vortex.txt
 F:	drivers/net/3c59x.c
 
 3CR990 NETWORK DRIVER
-P:	David Dillow
-M:	dave@thedillows.org
+M:	David Dillow <dave@thedillows.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/typhoon*
 
 3W-9XXX SATA-RAID CONTROLLER DRIVER
-P:	Adam Radford
-M:	linuxraid@amcc.com
+M:	Adam Radford <linuxraid@amcc.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://www.amcc.com
 S:	Supported
 F:	drivers/scsi/3w-9xxx*
 
 3W-XXXX ATA-RAID CONTROLLER DRIVER
-P:	Adam Radford
-M:	linuxraid@amcc.com
+M:	Adam Radford <linuxraid@amcc.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://www.amcc.com
 S:	Supported
 F:	drivers/scsi/3w-xxxx*
 
 53C700 AND 53C700-66 SCSI DRIVER
-P:	James E.J. Bottomley
-M:	James.Bottomley@HansenPartnership.com
+M:	"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/53c700*
 
 6PACK NETWORK DRIVER FOR AX.25
-P:	Andreas Koensgen
-M:	ajk@comnets.uni-bremen.de
+M:	Andreas Koensgen <ajk@comnets.uni-bremen.de>
 L:	linux-hams@vger.kernel.org
 S:	Maintained
 F:	drivers/net/hamradio/6pack.c
 
 8169 10/100/1000 GIGABIT ETHERNET DRIVER
-P:	Francois Romieu
-M:	romieu@fr.zoreil.com
+M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/r8169.c
 
 8250/16?50 (AND CLONE UARTS) SERIAL DRIVER
-P:	Alan Cox
-M:	alan@lxorguk.ukuu.org.uk
 L:	linux-serial@vger.kernel.org
 W:	http://serial.sourceforge.net
-S:	Odd Fixes
+S:	Orphan
 F:	drivers/serial/8250*
 F:	include/linux/serial_8250.h
 
 8390 NETWORK DRIVERS [WD80x3/SMC-ELITE, SMC-ULTRA, NE2000, 3C503, etc.]
-P:	Paul Gortmaker
-M:	p_gortmaker@yahoo.com
+M:	Paul Gortmaker <p_gortmaker@yahoo.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/*8390*
 F:	drivers/net/ax88796.c
 
 9P FILE SYSTEM
-P:	Eric Van Hensbergen
-M:	ericvh@gmail.com
-P:	Ron Minnich
-M:	rminnich@sandia.gov
-P:	Latchesar Ionkov
-M:	lucho@ionkov.net
+M:	Eric Van Hensbergen <ericvh@gmail.com>
+M:	Ron Minnich <rminnich@sandia.gov>
+M:	Latchesar Ionkov <lucho@ionkov.net>
 L:	v9fs-developer@lists.sourceforge.net
 W:	http://swik.net/v9fs
 T:	git git://git.kernel.org/pub/scm/linux/kernel/ericvh/v9fs.git
@@ -194,15 +180,13 @@ F:	Documentation/filesystems/9p.txt
 F:	fs/9p/
 
 A2232 SERIAL BOARD DRIVER
-P:	Enver Haase
-M:	A2232@gmx.net
+M:	Enver Haase <A2232@gmx.net>
 L:	linux-m68k@lists.linux-m68k.org
 S:	Maintained
 F:	drivers/char/ser_a2232*
 
 AACRAID SCSI RAID DRIVER
-P:	Adaptec OEM Raid Solutions
-M:	aacraid@adaptec.com
+M:	Adaptec OEM Raid Solutions <aacraid@adaptec.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://www.adaptec.com/
 S:	Supported
@@ -210,44 +194,38 @@ F:	Documentation/scsi/aacraid.txt
 F:	drivers/scsi/aacraid/
 
 ABIT UGURU 1,2 HARDWARE MONITOR DRIVER
-P:	Hans de Goede
-M:	j.w.r.degoede@hhs.nl
+M:	Hans de Goede <j.w.r.degoede@hhs.nl>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/abituguru.c
 
 ABIT UGURU 3 HARDWARE MONITOR DRIVER
-P:	Alistair John Strachan
-M:	alistair@devzero.co.uk
+M:	Alistair John Strachan <alistair@devzero.co.uk>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/abituguru3.c
 
 ACENIC DRIVER
-P:	Jes Sorensen
-M:	jes@trained-monkey.org
+M:	Jes Sorensen <jes@trained-monkey.org>
 L:	linux-acenic@sunsite.dk
 S:	Maintained
 F:	drivers/net/acenic*
 
 ACER ASPIRE ONE TEMPERATURE AND FAN DRIVER
-P: Peter Feuerer
-M: peter@piie.net
-W: http://piie.net/?section=acerhdf
-S: Maintained
-F: drivers/platform/x86/acerhdf.c
+M:	Peter Feuerer <peter@piie.net>
+W:	http://piie.net/?section=acerhdf
+S:	Maintained
+F:	drivers/platform/x86/acerhdf.c
 
 ACER WMI LAPTOP EXTRAS
-P:	Carlos Corbacho
-M:	carlos@strangeworlds.co.uk
+M:	Carlos Corbacho <carlos@strangeworlds.co.uk>
 L:	aceracpi@googlegroups.com (subscribers-only)
 W:	http://code.google.com/p/aceracpi
 S:	Maintained
 F:	drivers/platform/x86/acer-wmi.c
 
 ACPI
-P:	Len Brown
-M:	lenb@kernel.org
+M:	Len Brown <lenb@kernel.org>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux-acpi-2.6.git
@@ -257,8 +235,7 @@ F:	drivers/pnp/pnpacpi/
 F:	include/linux/acpi.h
 
 ACPI BATTERY DRIVERS
-P:	Alexey Starikovskiy
-M:	astarikovskiy@suse.de
+M:	Alexey Starikovskiy <astarikovskiy@suse.de>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 S:	Supported
@@ -266,80 +243,69 @@ F:	drivers/acpi/battery.c
 F:	drivers/acpi/*sbs*
 
 ACPI EC DRIVER
-P:	Alexey Starikovskiy
-M:	astarikovskiy@suse.de
+M:	Alexey Starikovskiy <astarikovskiy@suse.de>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 S:	Supported
 F:	drivers/acpi/ec.c
 
 ACPI FAN DRIVER
-P:	Zhang Rui
-M:	rui.zhang@intel.com
+M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 S:	Supported
 F:	drivers/acpi/fan.c
 
 ACPI PCI HOTPLUG DRIVER
-P:	Kristen Carlson Accardi
-M:	kristen.c.accardi@intel.com
+M:	Kristen Carlson Accardi <kristen.c.accardi@intel.com>
 L:	linux-pci@vger.kernel.org
 S:	Supported
 F:	drivers/pci/hotplug/acpi*
 
 ACPI THERMAL DRIVER
-P:	Zhang Rui
-M:	rui.zhang@intel.com
+M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 S:	Supported
 F:	drivers/acpi/*thermal*
 
 ACPI VIDEO DRIVER
-P:	Zhang Rui
-M:	rui.zhang@intel.com
+M:	Zhang Rui <rui.zhang@intel.com>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 S:	Supported
 F:	drivers/acpi/video.c
 
 ACPI WMI DRIVER
-P:	Carlos Corbacho
-M:	carlos@strangeworlds.co.uk
+M:	Carlos Corbacho <carlos@strangeworlds.co.uk>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 S:	Maintained
 F:	drivers/platform/x86/wmi.c
 
 AD1889 ALSA SOUND DRIVER
-P:	Kyle McMartin
-M:	kyle@mcmartin.ca
-P:	Thibaut Varene
-M:	T-Bone@parisc-linux.org
+M:	Kyle McMartin <kyle@mcmartin.ca>
+M:	Thibaut Varene <T-Bone@parisc-linux.org>
 W:	http://wiki.parisc-linux.org/AD1889
 L:	linux-parisc@vger.kernel.org
 S:	Maintained
 F:	sound/pci/ad1889.*
 
 ADM1025 HARDWARE MONITOR DRIVER
-P:	Jean Delvare
-M:	khali@linux-fr.org
+M:	Jean Delvare <khali@linux-fr.org>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/adm1025
 F:	drivers/hwmon/adm1025.c
 
 ADM1029 HARDWARE MONITOR DRIVER
-P:	Corentin Labbe
-M:	corentin.labbe@geomatys.fr
+M:	Corentin Labbe <corentin.labbe@geomatys.fr>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/adm1029.c
 
 ADM8211 WIRELESS DRIVER
-P:	Michael Wu
-M:	flamingice@sourmilk.net
+M:	Michael Wu <flamingice@sourmilk.net>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git
@@ -347,35 +313,30 @@ S:	Maintained
 F:	drivers/net/wireless/adm8211.*
 
 ADT746X FAN DRIVER
-P:	Colin Leroy
-M:	colin@colino.net
+M:	Colin Leroy <colin@colino.net>
 S:	Maintained
 F:	drivers/macintosh/therm_adt746x.c
 
 ADVANSYS SCSI DRIVER
-P:	Matthew Wilcox
-M:	matthew@wil.cx
+M:	Matthew Wilcox <matthew@wil.cx>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	Documentation/scsi/advansys.txt
 F:	drivers/scsi/advansys.c
 
 AEDSP16 DRIVER
-P:	Riccardo Facchetti
-M:	fizban@tin.it
+M:	Riccardo Facchetti <fizban@tin.it>
 S:	Maintained
 F:	sound/oss/aedsp16.c
 
 AFFS FILE SYSTEM
-P:	Roman Zippel
-M:	zippel@linux-m68k.org
+M:	Roman Zippel <zippel@linux-m68k.org>
 S:	Maintained
 F:	Documentation/filesystems/affs.txt
 F:	fs/affs/
 
 AFS FILESYSTEM & AF_RXRPC SOCKET DOMAIN
-P:	David Howells
-M:	dhowells@redhat.com
+M:	David Howells <dhowells@redhat.com>
 L:	linux-afs@lists.infradead.org
 S:	Supported
 F:	fs/afs/
@@ -383,40 +344,35 @@ F:	include/net/af_rxrpc.h
 F:	net/rxrpc/af_rxrpc.c
 
 AGPGART DRIVER
-P:	David Airlie
-M:	airlied@linux.ie
+M:	David Airlie <airlied@linux.ie>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
 S:	Maintained
 F:	drivers/char/agp/
 F:	include/linux/agp*
 
 AHA152X SCSI DRIVER
-P:	Juergen E. Fischer
-M:	fischer@norbit.de
+M:	"Juergen E. Fischer" <fischer@norbit.de>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/aha152x*
 F:	drivers/scsi/pcmcia/aha152x*
 
 AIC7XXX / AIC79XX SCSI DRIVER
-P:	Hannes Reinecke
-M:	hare@suse.de
+M:	Hannes Reinecke <hare@suse.de>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/aic7xxx/
 F:	drivers/scsi/aic7xxx_old/
 
 AIO
-P:	Benjamin LaHaise
-M:	bcrl@kvack.org
+M:	Benjamin LaHaise <bcrl@kvack.org>
 L:	linux-aio@kvack.org
 S:	Supported
 F:	fs/aio.c
 F:	include/linux/*aio*.h
 
 ALCATEL SPEEDTOUCH USB DRIVER
-P:	Duncan Sands
-M:	duncan.sands@free.fr
+M:	Duncan Sands <duncan.sands@free.fr>
 L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org/SpeedTouch/
 S:	Maintained
@@ -424,32 +380,27 @@ F:	drivers/usb/atm/speedtch.c
 F:	drivers/usb/atm/usbatm.c
 
 ALCHEMY AU1XX0 MMC DRIVER
-P:	Manuel Lauss
-M:	manuel.lauss@gmail.com
+M:	Manuel Lauss <manuel.lauss@gmail.com>
 S:	Maintained
 F:	drivers/mmc/host/au1xmmc.c
 
 ALI1563 I2C DRIVER
-P:	Rudolf Marek
-M:	r.marek@assembler.cz
+M:	Rudolf Marek <r.marek@assembler.cz>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	Documentation/i2c/busses/i2c-ali1563
 F:	drivers/i2c/busses/i2c-ali1563.c
 
 ALPHA PORT
-P:	Richard Henderson
-M:	rth@twiddle.net
+M:	Richard Henderson <rth@twiddle.net>
 S:	Odd Fixes for 2.4; Maintained for 2.6.
-P:	Ivan Kokshaysky
-M:	ink@jurassic.park.msu.ru
+M:	Ivan Kokshaysky <ink@jurassic.park.msu.ru>
 S:	Maintained for 2.4; PCI support for 2.6.
 L:	linux-alpha@vger.kernel.org
 F:	arch/alpha/
 
 AMD GEODE CS5536 USB DEVICE CONTROLLER DRIVER
-P:	Thomas Dahlmann
-M:	dahlmann.thomas@arcor.de
+M:	Thomas Dahlmann <dahlmann.thomas@arcor.de>
 L:	linux-geode@lists.infradead.org (moderated for non-subscribers)
 S:	Supported
 F:	drivers/usb/gadget/amd5536udc.*
@@ -466,8 +417,7 @@ F:	drivers/video/geode/
 F:	arch/x86/include/asm/geode.h
 
 AMD IOMMU (AMD-VI)
-P:	Joerg Roedel
-M:	joerg.roedel@amd.com
+M:	Joerg Roedel <joerg.roedel@amd.com>
 L:	iommu@lists.linux-foundation.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/joro/linux-2.6-iommu.git
 S:	Supported
@@ -475,40 +425,33 @@ F:	arch/x86/kernel/amd_iommu*.c
 F:	arch/x86/include/asm/amd_iommu*.h
 
 AMD MICROCODE UPDATE SUPPORT
-P:	Andreas Herrmann
-M:	andreas.herrmann3@amd.com
+M:	Andreas Herrmann <andreas.herrmann3@amd.com>
 L:	amd64-microcode@amd64.org
 S:	Supported
 F:	arch/x86/kernel/microcode_amd.c
 
 AMS (Apple Motion Sensor) DRIVER
-P:	Stelian Pop
-M:	stelian@popies.net
-P:	Michael Hanselmann
-M:	linux-kernel@hansmi.ch
+M:	Stelian Pop <stelian@popies.net>
+M:	Michael Hanselmann <linux-kernel@hansmi.ch>
 S:	Supported
 F:	drivers/hwmon/ams/
 
 AMSO1100 RNIC DRIVER
-P:	Tom Tucker
-M:	tom@opengridcomputing.com
-P:	Steve Wise
-M:	swise@opengridcomputing.com
+M:	Tom Tucker <tom@opengridcomputing.com>
+M:	Steve Wise <swise@opengridcomputing.com>
 L:	general@lists.openfabrics.org
 S:	Maintained
 F:	drivers/infiniband/hw/amso1100/
 
 AOA (Apple Onboard Audio) ALSA DRIVER
-P:	Johannes Berg
-M:	johannes@sipsolutions.net
+M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linuxppc-dev@ozlabs.org
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Maintained
 F:	sound/aoa/
 
 APM DRIVER
-P:	Stephen Rothwell
-M:	sfr@canb.auug.org.au
+M:	Stephen Rothwell <sfr@canb.auug.org.au>
 L:	linux-laptop@vger.kernel.org
 W:	http://www.canb.auug.org.au/~sfr/
 S:	Supported
@@ -516,51 +459,44 @@ F:	arch/x86/kernel/apm_32.c
 F:	include/linux/apm_bios.h
 
 APPLE BCM5974 MULTITOUCH DRIVER
-P:	Henrik Rydberg
-M:	rydberg@euromail.se
+M:	Henrik Rydberg <rydberg@euromail.se>
 L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	drivers/input/mouse/bcm5974.c
 
 APPLE SMC DRIVER
-P:	Nicolas Boichat
-M:	nicolas@boichat.ch
+M:	Nicolas Boichat <nicolas@boichat.ch>
 L:	mactel-linux-devel@lists.sourceforge.net
 S:	Maintained
 F:	drivers/hwmon/applesmc.c
 
 APPLETALK NETWORK LAYER
-P:	Arnaldo Carvalho de Melo
-M:	acme@ghostprotocols.net
+M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 S:	Maintained
 F:	drivers/net/appletalk/
 F:	net/appletalk/
 
 APPLETOUCH TOUCHPAD DRIVER
-P:	Johannes Berg
-M:	johannes@sipsolutions.net
+M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	Documentation/input/appletouch.txt
 F:	drivers/input/mouse/appletouch.c
 
 ARC FRAMEBUFFER DRIVER
-P:	Jaya Kumar
-M:	jayalk@intworks.biz
+M:	Jaya Kumar <jayalk@intworks.biz>
 S:	Maintained
 F:	drivers/video/arcfb.c
 F:	drivers/video/fb_defio.c
 
 ARM MFM AND FLOPPY DRIVERS
-P:	Ian Molton
-M:	spyro@f2s.com
+M:	Ian Molton <spyro@f2s.com>
 S:	Maintained
 F:	arch/arm/lib/floppydma.S
 F:	arch/arm/include/asm/floppy.h
 
 ARM PORT
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
@@ -571,79 +507,67 @@ S:	Orphan
 F:	drivers/mmc/host/mmci.*
 
 ARM/ADI ROADRUNNER MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 F:	arch/arm/mach-ixp23xx/
 F:	arch/arm/mach-ixp23xx/include/mach/
 
 ARM/ADS SPHERE MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/AFEB9260 MACHINE SUPPORT
-P:	Sergey Lapin
-M:	slapin@ossfans.org
+M:	Sergey Lapin <slapin@ossfans.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/AJECO 1ARM MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/ATMEL AT91RM9200 ARM ARCHITECTURE
-P:	Andrew Victor
-M:	linux@maxim.org.za
+M:	Andrew Victor <linux@maxim.org.za>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:	http://maxim.org.za/at91_26.html
 S:	Maintained
 
 ARM/CIRRUS LOGIC EP93XX ARM ARCHITECTURE
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/CIRRUS LOGIC EDB9315A MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/CLKDEV SUPPORT
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 F:	arch/arm/common/clkdev.c
 F:	arch/arm/include/asm/clkdev.h
 
 ARM/COMPULAB CM-X270/EM-X270 and CM-X300 MACHINE SUPPORT
-P:	Mike Rapoport
-M:	mike@compulab.co.il
+M:	Mike Rapoport <mike@compulab.co.il>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/CORGI MACHINE SUPPORT
-P:	Richard Purdie
-M:	rpurdie@rpsys.net
+M:	Richard Purdie <rpurdie@rpsys.net>
 S:	Maintained
 
 ARM/CORTINA SYSTEMS GEMINI ARM ARCHITECTURE
-P:	Paulius Zaleckas
-M:	paulius.zaleckas@teltonika.lt
+M:	Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 T:	git git://gitorious.org/linux-gemini/mainline.git
 S:	Maintained
 F:	arch/arm/mach-gemini/
 
 ARM/EBSA110 MACHINE SUPPORT
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
@@ -651,12 +575,9 @@ F:	arch/arm/mach-ebsa110/
 F:	drivers/net/arm/am79c961a.*
 
 ARM/EZX SMARTPHONES (A780, A910, A1200, E680, ROKR E2 and ROKR E6)
-P:	Daniel Ribeiro
-M:	drwyrm@gmail.com
-P:	Stefan Schmidt
-M:	stefan@openezx.org
-P:	Harald Welte
-M:	laforge@openezx.org
+M:	Daniel Ribeiro <drwyrm@gmail.com>
+M:	Stefan Schmidt <stefan@openezx.org>
+M:	Harald Welte <laforge@openezx.org>
 L:	openezx-devel@lists.openezx.org (subscribers-only)
 W:	http://www.openezx.org/
 S:	Maintained
@@ -664,15 +585,13 @@ T:	topgit git://git.openezx.org/openezx.git
 F:	arch/arm/mach-pxa/ezx.c
 
 ARM/FARADAY FA526 PORT
-P:	Paulius Zaleckas
-M:	paulius.zaleckas@teltonika.lt
+M:	Paulius Zaleckas <paulius.zaleckas@teltonika.lt>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 F:	arch/arm/mm/*-fa*
 
 ARM/FOOTBRIDGE ARCHITECTURE
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
@@ -680,175 +599,146 @@ F:	arch/arm/include/asm/hardware/dec21285.h
 F:	arch/arm/mach-footbridge/
 
 ARM/FREESCALE IMX / MXC ARM ARCHITECTURE
-P:	Sascha Hauer
-M:	kernel@pengutronix.de
+M:	Sascha Hauer <kernel@pengutronix.de>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/GLOMATION GESBC9312SX MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/GUMSTIX MACHINE SUPPORT
-P:	Steve Sakoman
-M:	sakoman@gmail.com
+M:	Steve Sakoman <sakoman@gmail.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/H4700 (HP IPAQ HX4700) MACHINE SUPPORT
-P:	Philipp Zabel
-M:	philipp.zabel@gmail.com
+M:	Philipp Zabel <philipp.zabel@gmail.com>
 S:	Maintained
 F:	arch/arm/mach-pxa/hx4700.c
 F:	arch/arm/mach-pxa/include/mach/hx4700.h
 
 ARM/HP JORNADA 7XX MACHINE SUPPORT
-P:	Kristoffer Ericson
-M:	kristoffer.ericson@gmail.com
+M:	Kristoffer Ericson <kristoffer.ericson@gmail.com>
 W:	www.jlime.com
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
+F:	arch/arm/mach-sa1100/jornada720.c
+F:	arch/arm/mach-sa1100/include/mach/jornada720.h
 
 ARM/INTEL IOP32X ARM ARCHITECTURE
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
-P:	Dan Williams
-M:	dan.j.williams@intel.com
+M:	Lennert Buytenhek <kernel@wantstofly.org>
+M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Supported
 
 ARM/INTEL IOP33X ARM ARCHITECTURE
-P:	Dan Williams
-M:	dan.j.williams@intel.com
+M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Supported
 
 ARM/INTEL IOP13XX ARM ARCHITECTURE
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
-P:	Dan Williams
-M:	dan.j.williams@intel.com
+M:	Lennert Buytenhek <kernel@wantstofly.org>
+M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Supported
 
 ARM/INTEL IQ81342EX MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
-P:	Dan Williams
-M:	dan.j.williams@intel.com
+M:	Lennert Buytenhek <kernel@wantstofly.org>
+M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Supported
 
 ARM/INTEL IXP2000 ARM ARCHITECTURE
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/INTEL IXDP2850 MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/INTEL IXP23XX ARM ARCHITECTURE
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/INTEL XSC3 (MANZANO) ARM CORE
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
-P:	Dan Williams
-M:	dan.j.williams@intel.com
+M:	Lennert Buytenhek <kernel@wantstofly.org>
+M:	Dan Williams <dan.j.williams@intel.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Supported
 
 ARM/IP FABRICS DOUBLE ESPRESSO MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/LOGICPD PXA270 MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/MAGICIAN MACHINE SUPPORT
-P:	Philipp Zabel
-M:	philipp.zabel@gmail.com
+M:	Philipp Zabel <philipp.zabel@gmail.com>
 S:	Maintained
 
 ARM/MIOA701 MACHINE SUPPORT
-P:	Robert Jarzmik
-M:	robert.jarzmik@free.fr
+M:	Robert Jarzmik <robert.jarzmik@free.fr>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 F:	arch/arm/mach-pxa/mioa701.c
 S:	Maintained
 
 ARM/NEC MOBILEPRO 900/c MACHINE SUPPORT
-P:	Michael Petchkovsky
-M:	mkpetch@internode.on.net
+M:	Michael Petchkovsky <mkpetch@internode.on.net>
 S:	Maintained
 
 ARM/OPENMOKO NEO FREERUNNER (GTA02) MACHINE SUPPORT
-P:	Nelson Castillo
-M:	arhuaco@freaks-unidos.net
+M:	Nelson Castillo <arhuaco@freaks-unidos.net>
 L:	openmoko-kernel@lists.openmoko.org (subscribers-only)
 W:	http://wiki.openmoko.org/wiki/Neo_FreeRunner
 S:	Supported
 
 ARM/TOSA MACHINE SUPPORT
-P:	Dmitry Eremin-Solenikov
-M:	dbaryshkov@gmail.com
-P:	Dirk Opfer
-M:	dirk@opfer-online.de
+M:	Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+M:	Dirk Opfer <dirk@opfer-online.de>
 S:	Maintained
 
 ARM/PALMTX,PALMT5,PALMLD,PALMTE2 SUPPORT
-P:	Marek Vasut
-M:	marek.vasut@gmail.com
+M:	Marek Vasut <marek.vasut@gmail.com>
 W:	http://hackndev.com
 S:	Maintained
 
 ARM/PALM TREO 680 SUPPORT
-P:	Tomas Cech
-M:	sleep_walker@suse.cz
+M:	Tomas Cech <sleep_walker@suse.cz>
 W:	http://hackndev.com
 S:	Maintained
 
 ARM/PALMZ72 SUPPORT
-P:	Sergey Lapin
-M:	slapin@ossfans.org
+M:	Sergey Lapin <slapin@ossfans.org>
 W:	http://hackndev.com
 S:	Maintained
 
 ARM/PLEB SUPPORT
-P:	Peter Chubb
-M:	pleb@gelato.unsw.edu.au
+M:	Peter Chubb <pleb@gelato.unsw.edu.au>
 W:	http://www.disy.cse.unsw.edu.au/Hardware/PLEB
 S:	Maintained
 
 ARM/PT DIGITAL BOARD PORT
-P:	Stefan Eletzhofer
-M:	stefan.eletzhofer@eletztrick.de
+M:	Stefan Eletzhofer <stefan.eletzhofer@eletztrick.de>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
 
 ARM/RADISYS ENP2611 MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/RISCPC ARCHITECTURE
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
@@ -862,14 +752,12 @@ F:	drivers/net/arm/ether*
 F:	drivers/scsi/arm/
 
 ARM/SHARK MACHINE SUPPORT
-P:	Alexander Schulz
-M:	alex@shark-linux.de
+M:	Alexander Schulz <alex@shark-linux.de>
 W:	http://www.shark-linux.de/shark.html
 S:	Maintained
 
 ARM/SAMSUNG ARM ARCHITECTURES
-P:	Ben Dooks
-M:	ben-linux@fluff.org
+M:	Ben Dooks <ben-linux@fluff.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
@@ -877,91 +765,73 @@ F:	arch/arm/plat-s3c/
 F:	arch/arm/plat-s3c24xx/
 
 ARM/S3C2410 ARM ARCHITECTURE
-P:	Ben Dooks
-M:	ben-linux@fluff.org
+M:	Ben Dooks <ben-linux@fluff.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
 F:	arch/arm/mach-s3c2410/
 
 ARM/S3C2440 ARM ARCHITECTURE
-P:	Ben Dooks
-M:	ben-linux@fluff.org
+M:	Ben Dooks <ben-linux@fluff.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
 F:	arch/arm/mach-s3c2440/
 
 ARM/S3C2442 ARM ARCHITECTURE
-P:	Ben Dooks
-M:	ben-linux@fluff.org
+M:	Ben Dooks <ben-linux@fluff.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
 F:	arch/arm/mach-s3c2442/
 
 ARM/S3C2443 ARM ARCHITECTURE
-P:	Ben Dooks
-M:	ben-linux@fluff.org
+M:	Ben Dooks <ben-linux@fluff.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
 F:	arch/arm/mach-s3c2443/
 
 ARM/S3C6400 ARM ARCHITECTURE
-P:	Ben Dooks
-M:	ben-linux@fluff.org
+M:	Ben Dooks <ben-linux@fluff.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
 F:	arch/arm/mach-s3c6400/
 
 ARM/S3C6410 ARM ARCHITECTURE
-P:	Ben Dooks
-M:	ben-linux@fluff.org
+M:	Ben Dooks <ben-linux@fluff.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.fluff.org/ben/linux/
 S:	Maintained
 F:	arch/arm/mach-s3c6410/
 
 ARM/TECHNOLOGIC SYSTEMS TS7250 MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/THECUS N2100 MACHINE SUPPORT
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 
 ARM/NUVOTON W90X900 ARM ARCHITECTURE
-P:	Wan ZongShun
-M:	mcuos.com@gmail.com
+M:	Wan ZongShun <mcuos.com@gmail.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:	http://www.mcuos.com
 S:	Maintained
 
 ARM/VFP SUPPORT
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
 F:	arch/arm/vfp/
 
-ARPD SUPPORT
-P:	Jonathan Layes
-L:	netdev@vger.kernel.org
-S:	Maintained
-F:	net/ipv4/arp.c
-
 ASUS ACPI EXTRAS DRIVER
-P:	Corentin Chary
-M:	corentincj@iksaif.net
-P:	Karol Kozimor
-M:	sziwan@users.sourceforge.net
+M:	Corentin Chary <corentincj@iksaif.net>
+M:	Karol Kozimor <sziwan@users.sourceforge.net>
 L:	acpi4asus-user@lists.sourceforge.net
 W:	http://acpi4asus.sf.net
 S:	Maintained
@@ -969,25 +839,21 @@ F:	arch/x86/kernel/acpi/boot.c
 F:	drivers/platform/x86/asus_acpi.c
 
 ASUS ASB100 HARDWARE MONITOR DRIVER
-P:	Mark M. Hoffman
-M:	mhoffman@lightlink.com
+M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/asb100.c
 
 ASUS LAPTOP EXTRAS DRIVER
-P:	Corentin Chary
-M:	corentincj@iksaif.net
+M:	Corentin Chary <corentincj@iksaif.net>
 L:	acpi4asus-user@lists.sourceforge.net
 W:	http://acpi4asus.sf.net
 S:	Maintained
 F:	drivers/platform/x86/asus-laptop.c
 
 ASYNCHRONOUS TRANSFERS/TRANSFORMS (IOAT) API
-P:	Dan Williams
-M:	dan.j.williams@intel.com
-P:	Maciej Sosnowski
-M:	maciej.sosnowski@intel.com
+M:	Dan Williams <dan.j.williams@intel.com>
+M:	Maciej Sosnowski <maciej.sosnowski@intel.com>
 W:	http://sourceforge.net/projects/xscaleiop
 S:	Supported
 F:	Documentation/crypto/async-tx-api.txt
@@ -997,64 +863,49 @@ F:	include/linux/dmaengine.h
 F:	include/linux/async_tx.h
 
 ATA OVER ETHERNET (AOE) DRIVER
-P:	Ed L. Cashin
-M:	ecashin@coraid.com
+M:	"Ed L. Cashin" <ecashin@coraid.com>
 W:	http://www.coraid.com/support/linux
 S:	Supported
 F:	Documentation/aoe/
 F:	drivers/block/aoe/
 
 ATHEROS ATH5K WIRELESS DRIVER
-P:	Jiri Slaby
-M:	jirislaby@gmail.com
-P:	Nick Kossifidis
-M:	mickflemm@gmail.com
-P:	Luis R. Rodriguez
-M:	lrodriguez@atheros.com
-P:	Bob Copeland
-M:	me@bobcopeland.com
+M:	Jiri Slaby <jirislaby@gmail.com>
+M:	Nick Kossifidis <mickflemm@gmail.com>
+M:	"Luis R. Rodriguez" <lrodriguez@atheros.com>
+M:	Bob Copeland <me@bobcopeland.com>
 L:	linux-wireless@vger.kernel.org
 L:	ath5k-devel@lists.ath5k.org
 S:	Maintained
 F:	drivers/net/wireless/ath/ath5k/
 
 ATHEROS ATH9K WIRELESS DRIVER
-P:	Luis R. Rodriguez
-M:	lrodriguez@atheros.com
-P:	Jouni Malinen
-M:	jmalinen@atheros.com
-P:	Sujith Manoharan
-M:	Sujith.Manoharan@atheros.com
-P:	Vasanthakumar Thiagarajan
-M:	vasanth@atheros.com
-P:	Senthil Balasubramanian
-M:	senthilkumar@atheros.com
+M:	"Luis R. Rodriguez" <lrodriguez@atheros.com>
+M:	Jouni Malinen <jmalinen@atheros.com>
+M:	Sujith Manoharan <Sujith.Manoharan@atheros.com>
+M:	Vasanthakumar Thiagarajan <vasanth@atheros.com>
+M:	Senthil Balasubramanian <senthilkumar@atheros.com>
 L:	linux-wireless@vger.kernel.org
 L:	ath9k-devel@lists.ath9k.org
 S:	Supported
 F:	drivers/net/wireless/ath/ath9k/
 
 ATHEROS AR9170 WIRELESS DRIVER
-P:	Christian Lamparter
-M:	chunkeey@web.de
+M:	Christian Lamparter <chunkeey@web.de>
 L:	linux-wireless@vger.kernel.org
 W:	http://wireless.kernel.org/en/users/Drivers/ar9170
 S:	Maintained
 F:	drivers/net/wireless/ath/ar9170/
 
 ATI_REMOTE2 DRIVER
-P:	Ville Syrjala
-M:	syrjala@sci.fi
+M:	Ville Syrjala <syrjala@sci.fi>
 S:	Maintained
 F:	drivers/input/misc/ati_remote2.c
 
 ATLX ETHERNET DRIVERS
-P:	Jay Cliburn
-M:	jcliburn@gmail.com
-P:	Chris Snook
-M:	csnook@redhat.com
-P:	Jie Yang
-M:	jie.yang@atheros.com
+M:	Jay Cliburn <jcliburn@gmail.com>
+M:	Chris Snook <csnook@redhat.com>
+M:	Jie Yang <jie.yang@atheros.com>
 L:	atl1-devel@lists.sourceforge.net
 W:	http://sourceforge.net/projects/atl1
 W:	http://atl1.sourceforge.net
@@ -1062,8 +913,7 @@ S:	Maintained
 F:	drivers/net/atlx/
 
 ATM
-P:	Chas Williams
-M:	chas@cmf.nrl.navy.mil
+M:	Chas Williams <chas@cmf.nrl.navy.mil>
 L:	linux-atm-general@lists.sourceforge.net (subscribers-only)
 L:	netdev@vger.kernel.org
 W:	http://linux-atm.sourceforge.net
@@ -1072,8 +922,7 @@ F:	drivers/atm/
 F:	include/linux/atm*
 
 ATMEL AT91 MCI DRIVER
-P:	Nicolas Ferre
-M:	nicolas.ferre@atmel.com
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 W:	http://www.atmel.com/products/AT91/
 W:	http://www.at91.com/
@@ -1081,49 +930,42 @@ S:	Maintained
 F:	drivers/mmc/host/at91_mci.c
 
 ATMEL AT91 / AT32 MCI DRIVER
-P:	Nicolas Ferre
-M:	nicolas.ferre@atmel.com
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 S:	Maintained
 F:	drivers/mmc/host/atmel-mci.c
 F:	drivers/mmc/host/atmel-mci-regs.h
 
 ATMEL AT91 / AT32 SERIAL DRIVER
-P:	Haavard Skinnemoen
-M:	hskinnemoen@atmel.com
+M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
 S:	Supported
 F:	drivers/serial/atmel_serial.c
 
 ATMEL LCDFB DRIVER
-P:	Nicolas Ferre
-M:	nicolas.ferre@atmel.com
+M:	Nicolas Ferre <nicolas.ferre@atmel.com>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/video/atmel_lcdfb.c
 F:	include/video/atmel_lcdc.h
 
 ATMEL MACB ETHERNET DRIVER
-P:	Haavard Skinnemoen
-M:	hskinnemoen@atmel.com
+M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
 S:	Supported
 F:	drivers/net/macb.*
 
 ATMEL SPI DRIVER
-P:	Haavard Skinnemoen
-M:	hskinnemoen@atmel.com
+M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
 S:	Supported
 F:	drivers/spi/atmel_spi.*
 
 ATMEL USBA UDC DRIVER
-P:	Haavard Skinnemoen
-M:	hskinnemoen@atmel.com
+M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
 L:	kernel@avr32linux.org
 W:	http://avr32linux.org/twiki/bin/view/Main/AtmelUsbDeviceDriver
 S:	Supported
 F:	drivers/usb/gadget/atmel_usba_udc.*
 
 ATMEL WIRELESS DRIVER
-P:	Simon Kelley
-M:	simon@thekelleys.org.uk
+M:	Simon Kelley <simon@thekelleys.org.uk>
 L:	linux-wireless@vger.kernel.org
 W:	http://www.thekelleys.org.uk/atmel
 W:	http://atmelwlandriver.sourceforge.net/
@@ -1131,10 +973,8 @@ S:	Maintained
 F:	drivers/net/wireless/atmel*
 
 AUDIT SUBSYSTEM
-P:	Al Viro
-M:	viro@zeniv.linux.org.uk
-P:	Eric Paris
-M:	eparis@redhat.com
+M:	Al Viro <viro@zeniv.linux.org.uk>
+M:	Eric Paris <eparis@redhat.com>
 L:	linux-audit@redhat.com (subscribers-only)
 W:	http://people.redhat.com/sgrubb/audit/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/viro/audit-current.git
@@ -1143,8 +983,7 @@ F:	include/linux/audit.h
 F:	kernel/audit*
 
 AUXILIARY DISPLAY DRIVERS
-P:	Miguel Ojeda Sandonis
-M:	miguel.ojeda.sandonis@gmail.com
+M:	Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
 W:	http://miguelojeda.es/auxdisplay.htm
 W:	http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
 S:	Maintained
@@ -1152,8 +991,7 @@ F:	drivers/auxdisplay/
 F:	include/linux/cfag12864b.h
 
 AVR32 ARCHITECTURE
-P:	Haavard Skinnemoen
-M:	hskinnemoen@atmel.com
+M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
 W:	http://www.atmel.com/products/AVR32/
 W:	http://avr32linux.org/
 W:	http://avrfreaks.net/
@@ -1161,14 +999,12 @@ S:	Supported
 F:	arch/avr32/
 
 AVR32/AT32AP MACHINE SUPPORT
-P:	Haavard Skinnemoen
-M:	hskinnemoen@atmel.com
+M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
 S:	Supported
 F:	arch/avr32/mach-at32ap/
 
 AX.25 NETWORK LAYER
-P:	Ralf Baechle
-M:	ralf@linux-mips.org
+M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-hams@vger.kernel.org
 W:	http://www.linux-ax25.org/
 S:	Maintained
@@ -1177,128 +1013,110 @@ F:	include/net/ax25.h
 F:	net/ax25/
 
 B43 WIRELESS DRIVER
-P:	Michael Buesch
-M:	mb@bu3sch.de
-P:	Stefano Brivio
-M:	stefano.brivio@polimi.it
+M:	Michael Buesch <mb@bu3sch.de>
+M:	Stefano Brivio <stefano.brivio@polimi.it>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/en/users/Drivers/b43
 S:	Maintained
 F:	drivers/net/wireless/b43/
 
 B43LEGACY WIRELESS DRIVER
-P:	Larry Finger
-M:	Larry.Finger@lwfinger.net
-P:	Stefano Brivio
-M:	stefano.brivio@polimi.it
+M:	Larry Finger <Larry.Finger@lwfinger.net>
+M:	Stefano Brivio <stefano.brivio@polimi.it>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/en/users/Drivers/b43
 S:	Maintained
 F:	drivers/net/wireless/b43legacy/
 
 BACKLIGHT CLASS/SUBSYSTEM
-P:	Richard Purdie
-M:	rpurdie@rpsys.net
+M:	Richard Purdie <rpurdie@rpsys.net>
 S:	Maintained
 F:	drivers/video/backlight/
 F:	include/linux/backlight.h
 
 BAYCOM/HDLCDRV DRIVERS FOR AX.25
-P:	Thomas Sailer
-M:	t.sailer@alumni.ethz.ch
+M:	Thomas Sailer <t.sailer@alumni.ethz.ch>
 L:	linux-hams@vger.kernel.org
 W:	http://www.baycom.org/~tom/ham/ham.html
 S:	Maintained
 F:	drivers/net/hamradio/baycom*
 
 BEFS FILE SYSTEM
-P:	Sergey S. Kostyliov
-M:	rathamahata@php4.ru
+M:	"Sergey S. Kostyliov" <rathamahata@php4.ru>
 S:	Maintained
 F:	Documentation/filesystems/befs.txt
 F:	fs/befs/
 
 BFS FILE SYSTEM
-P:	Tigran A. Aivazian
-M:	tigran@aivazian.fsnet.co.uk
+M:	"Tigran A. Aivazian" <tigran@aivazian.fsnet.co.uk>
 S:	Maintained
 F:	Documentation/filesystems/bfs.txt
 F:	fs/bfs/
 F:	include/linux/bfs_fs.h
 
 BLACKFIN ARCHITECTURE
-P:	Mike Frysinger
-M:	vapier@gentoo.org
+M:	Mike Frysinger <vapier@gentoo.org>
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	arch/blackfin/
 
 BLACKFIN EMAC DRIVER
-P:	Michael Hennerich
-M:	michael.hennerich@analog.com
+M:	Michael Hennerich <michael.hennerich@analog.com>
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/net/bfin_mac.*
 
 BLACKFIN RTC DRIVER
-P:	Mike Frysinger
-M:	vapier.adi@gmail.com
+M:	Mike Frysinger <vapier.adi@gmail.com>
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/rtc/rtc-bfin.c
 
 BLACKFIN SERIAL DRIVER
-P:	Sonic Zhang
-M:	sonic.zhang@analog.com
+M:	Sonic Zhang <sonic.zhang@analog.com>
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/serial/bfin_5xx.c
 
 BLACKFIN WATCHDOG DRIVER
-P:	Mike Frysinger
-M:	vapier.adi@gmail.com
+M:	Mike Frysinger <vapier.adi@gmail.com>
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org
 S:	Supported
 F:	drivers/watchdog/bfin_wdt.c
 
 BLACKFIN I2C TWI DRIVER
-P:	Sonic Zhang
-M:	sonic.zhang@analog.com
+M:	Sonic Zhang <sonic.zhang@analog.com>
 L:	uclinux-dist-devel@blackfin.uclinux.org
 W:	http://blackfin.uclinux.org/
 S:	Supported
 F:	drivers/i2c/busses/i2c-bfin-twi.c
 
 BLOCK LAYER
-P:	Jens Axboe
-M:	axboe@kernel.dk
+M:	Jens Axboe <axboe@kernel.dk>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/axboe/linux-2.6-block.git
 S:	Maintained
 F:	block/
 
 BLOCK2MTD DRIVER
-P:	Joern Engel
-M:	joern@lazybastard.org
+M:	Joern Engel <joern@lazybastard.org>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
 F:	drivers/mtd/devices/block2mtd.c
 
 BLUETOOTH DRIVERS
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
+M:	Marcel Holtmann <marcel@holtmann.org>
 L:	linux-bluetooth@vger.kernel.org
 W:	http://www.bluez.org/
 S:	Maintained
 F:	drivers/bluetooth/
 
 BLUETOOTH SUBSYSTEM
-P:	Marcel Holtmann
-M:	marcel@holtmann.org
+M:	Marcel Holtmann <marcel@holtmann.org>
 L:	linux-bluetooth@vger.kernel.org
 W:	http://www.bluez.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/holtmann/bluetooth-2.6.git
@@ -1307,8 +1125,7 @@ F:	net/bluetooth/
 F:	include/net/bluetooth/
 
 BONDING DRIVER
-P:	Jay Vosburgh
-M:	fubar@us.ibm.com
+M:	Jay Vosburgh <fubar@us.ibm.com>
 L:	bonding-devel@lists.sourceforge.net
 W:	http://sourceforge.net/projects/bonding/
 S:	Supported
@@ -1316,54 +1133,46 @@ F:	drivers/net/bonding/
 F:	include/linux/if_bonding.h
 
 BROADCOM B44 10/100 ETHERNET DRIVER
-P:	Gary Zambrano
-M:	zambrano@broadcom.com
+M:	Gary Zambrano <zambrano@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/b44.*
 
 BROADCOM BNX2 GIGABIT ETHERNET DRIVER
-P:	Michael Chan
-M:	mchan@broadcom.com
+M:	Michael Chan <mchan@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/bnx2.*
 F:	drivers/net/bnx2_*
 
 BROADCOM BNX2X 10 GIGABIT ETHERNET DRIVER
-P:	Eilon Greenstein
-M:	eilong@broadcom.com
+M:	Eilon Greenstein <eilong@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/bnx2x*
 
 BROADCOM TG3 GIGABIT ETHERNET DRIVER
-P:	Matt Carlson
-M:	mcarlson@broadcom.com
-P:	Michael Chan
-M:	mchan@broadcom.com
+M:	Matt Carlson <mcarlson@broadcom.com>
+M:	Michael Chan <mchan@broadcom.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/tg3.*
 
 BSG (block layer generic sg v4 driver)
-P:	FUJITA Tomonori
-M:	fujita.tomonori@lab.ntt.co.jp
+M:	FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
 L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	block/bsg.c
 F:	include/linux/bsg.h
 
 BT8XXGPIO DRIVER
-P:	Michael Buesch
-M:	mb@bu3sch.de
+M:	Michael Buesch <mb@bu3sch.de>
 W:	http://bu3sch.de/btgpio.php
 S:	Maintained
 F:	drivers/gpio/bt8xxgpio.c
 
 BTRFS FILE SYSTEM
-P:	Chris Mason
-M:	chris.mason@oracle.com
+M:	Chris Mason <chris.mason@oracle.com>
 L:	linux-btrfs@vger.kernel.org
 W:	http://btrfs.wiki.kernel.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mason/btrfs-unstable.git
@@ -1372,8 +1181,7 @@ F:	Documentation/filesystems/btrfs.txt
 F:	fs/btrfs/
 
 BTTV VIDEO4LINUX DRIVER
-P:	Mauro Carvalho Chehab
-M:	mchehab@infradead.org
+M:	Mauro Carvalho Chehab <mchehab@infradead.org>
 L:	linux-media@vger.kernel.org
 W:	http://linuxtv.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -1382,16 +1190,14 @@ F:	Documentation/video4linux/bttv/
 F:	drivers/media/video/bt8xx/bttv*
 
 CACHEFILES: FS-CACHE BACKEND FOR CACHING ON MOUNTED FILESYSTEMS
-P:	David Howells
-M:	dhowells@redhat.com
+M:	David Howells <dhowells@redhat.com>
 L:	linux-cachefs@redhat.com
 S:	Supported
 F:	Documentation/filesystems/caching/cachefiles.txt
 F:	fs/cachefiles/
 
 CAFE CMOS INTEGRATED CAMERA CONTROLLER DRIVER
-P:	Jonathan Corbet
-M:	corbet@lwn.net
+M:	Jonathan Corbet <corbet@lwn.net>
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
@@ -1399,10 +1205,8 @@ F:	Documentation/video4linux/cafe_ccic
 F:	drivers/media/video/cafe_ccic*
 
 CALGARY x86-64 IOMMU
-P:	Muli Ben-Yehuda
-M:	muli@il.ibm.com
-P:	Jon D. Mason
-M:	jdmason@kudzu.us
+M:	Muli Ben-Yehuda <muli@il.ibm.com>
+M:	"Jon D. Mason" <jdmason@kudzu.us>
 L:	discuss@x86-64.org
 S:	Maintained
 F:	arch/x86/kernel/pci-calgary_64.c
@@ -1411,10 +1215,8 @@ F:	arch/x86/include/asm/calgary.h
 F:	arch/x86/include/asm/tce.h
 
 CAN NETWORK LAYER
-P:	Urs Thuermann
-M:	urs.thuermann@volkswagen.de
-P:	Oliver Hartkopp
-M:	oliver.hartkopp@volkswagen.de
+M:	Urs Thuermann <urs.thuermann@volkswagen.de>
+M:	Oliver Hartkopp <oliver.hartkopp@volkswagen.de>
 L:	socketcan-core@lists.berlios.de (subscribers-only)
 W:	http://developer.berlios.de/projects/socketcan/
 S:	Maintained
@@ -1423,15 +1225,13 @@ F:	include/linux/can/
 F:	include/linux/can.h
 
 CAN NETWORK DRIVERS
-P:	Wolfgang Grandegger
-M:	wg@grandegger.com
+M:	Wolfgang Grandegger <wg@grandegger.com>
 L:	socketcan-core@lists.berlios.de (subscribers-only)
 W:	http://developer.berlios.de/projects/socketcan/
 S:	Maintained
 
 CELL BROADBAND ENGINE ARCHITECTURE
-P:	Arnd Bergmann
-M:	arnd@arndb.de
+M:	Arnd Bergmann <arnd@arndb.de>
 L:	linuxppc-dev@ozlabs.org
 L:	cbe-oss-dev@ozlabs.org
 W:	http://www.ibm.com/developerworks/power/cell/
@@ -1442,8 +1242,7 @@ F:	arch/powerpc/oprofile/*cell*
 F:	arch/powerpc/platforms/cell/
 
 CERTIFIED WIRELESS USB (WUSB) SUBSYSTEM:
-P:	David Vrabel
-M:	david.vrabel@csr.com
+M:	David Vrabel <david.vrabel@csr.com>
 L:	linux-usb@vger.kernel.org
 S:	Supported
 F:	Documentation/usb/WUSB-Design-overview.txt
@@ -1452,8 +1251,7 @@ F:	drivers/usb/wusbcore/
 F:	include/linux/usb/wusb*
 
 CFAG12864B LCD DRIVER
-P:	Miguel Ojeda Sandonis
-M:	miguel.ojeda.sandonis@gmail.com
+M:	Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
 W:	http://miguelojeda.es/auxdisplay.htm
 W:	http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
 S:	Maintained
@@ -1461,8 +1259,7 @@ F:	drivers/auxdisplay/cfag12864b.c
 F:	include/linux/cfag12864b.h
 
 CFAG12864BFB LCD FRAMEBUFFER DRIVER
-P:	Miguel Ojeda Sandonis
-M:	miguel.ojeda.sandonis@gmail.com
+M:	Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
 W:	http://miguelojeda.es/auxdisplay.htm
 W:	http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
 S:	Maintained
@@ -1470,8 +1267,7 @@ F:	drivers/auxdisplay/cfag12864bfb.c
 F:	include/linux/cfag12864b.h
 
 CFG80211 and NL80211
-P:	Johannes Berg
-M:	johannes@sipsolutions.net
+M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F:	include/linux/nl80211.h
@@ -1480,66 +1276,47 @@ F:	net/wireless/*
 X:	net/wireless/wext*
 
 CHECKPATCH
-P:	Andy Whitcroft
-M:	apw@canonical.com
+M:	Andy Whitcroft <apw@canonical.com>
 S:	Supported
 F:	scripts/checkpatch.pl
 
 CISCO 10G ETHERNET DRIVER
-P:	Scott Feldman
-M:	scofeldm@cisco.com
-P:	Joe Eykholt
-M:	jeykholt@cisco.com
+M:	Scott Feldman <scofeldm@cisco.com>
+M:	Joe Eykholt <jeykholt@cisco.com>
 S:	Supported
 F:	drivers/net/enic/
 
 CIRRUS LOGIC EP93XX ETHERNET DRIVER
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/arm/ep93xx_eth.c
 
 CIRRUS LOGIC EP93XX OHCI USB HOST DRIVER
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/host/ohci-ep93xx.c
 
 CIRRUS LOGIC CS4270 SOUND DRIVER
-P:	Timur Tabi
-M:	timur@freescale.com
+M:	Timur Tabi <timur@freescale.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Supported
 F:	sound/soc/codecs/cs4270*
 
-CIRRUS LOGIC CS4280/CS461x SOUNDDRIVER
-P:	Cirrus Logic Corporation (kernel 2.2 driver)
-M:	Cirrus Logic Corporation, Thomas Woller <twoller@crystal.cirrus.com>
-P:	Nils Faerber (port to kernel 2.4)
-M:	Nils Faerber <nils@kernelconcepts.de>
-S:	Maintained
-F:	Documentation/input/cs461x.txt
-F:	sound/pci/cs46xx/
-
 CLK API
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Russell King <linux@arm.linux.org.uk>
 F:	include/linux/clk.h
 
 CISCO FCOE HBA DRIVER
-P:	Abhijeet Joglekar
-M:	abjoglek@cisco.com
-P:	Joe Eykholt
-M:	jeykholt@cisco.com
+M:	Abhijeet Joglekar <abjoglek@cisco.com>
+M:	Joe Eykholt <jeykholt@cisco.com>
 L:	linux-scsi@vger.kernel.org
 S:	Supported
 F:	drivers/scsi/fnic/
 
 CODA FILE SYSTEM
-P:	Jan Harkes
-M:	jaharkes@cs.cmu.edu
+M:	Jan Harkes <jaharkes@cs.cmu.edu>
 M:	coda@cs.cmu.edu
 L:	codalist@coda.cs.cmu.edu
 W:	http://www.coda.cs.cmu.edu/
@@ -1549,8 +1326,7 @@ F:	fs/coda/
 F:	include/linux/coda*.h
 
 COMMON INTERNET FILE SYSTEM (CIFS)
-P:	Steve French
-M:	sfrench@samba.org
+M:	Steve French <sfrench@samba.org>
 L:	linux-cifs-client@lists.samba.org
 L:	samba-technical@lists.samba.org
 W:	http://linux-cifs.samba.org/
@@ -1560,70 +1336,57 @@ F:	Documentation/filesystems/cifs.txt
 F:	fs/cifs/
 
 COMPACTPCI HOTPLUG CORE
-P:	Scott Murray
-M:	scottm@somanetworks.com
-M:	scott@spiteful.org
+M:	Scott Murray <scott@spiteful.org>
 L:	linux-pci@vger.kernel.org
-S:	Supported
+S:	Maintained
 F:	drivers/pci/hotplug/cpci_hotplug*
 
 COMPACTPCI HOTPLUG ZIATECH ZT5550 DRIVER
-P:	Scott Murray
-M:	scottm@somanetworks.com
-M:	scott@spiteful.org
+M:	Scott Murray <scott@spiteful.org>
 L:	linux-pci@vger.kernel.org
-S:	Supported
+S:	Maintained
 F:	drivers/pci/hotplug/cpcihp_zt5550.*
 
 COMPACTPCI HOTPLUG GENERIC DRIVER
-P:	Scott Murray
-M:	scottm@somanetworks.com
-M:	scott@spiteful.org
+M:	Scott Murray <scott@spiteful.org>
 L:	linux-pci@vger.kernel.org
-S:	Supported
+S:	Maintained
 F:	drivers/pci/hotplug/cpcihp_generic.c
 
 COMPAL LAPTOP SUPPORT
-P:	Cezary Jackiewicz
-M:	cezary.jackiewicz@gmail.com
+M:	Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
 S:	Maintained
 F:	drivers/platform/x86/compal-laptop.c
 
 COMPUTONE INTELLIPORT MULTIPORT CARD
-P:	Michael H. Warfield
-M:	mhw@wittsend.com
+M:	"Michael H. Warfield" <mhw@wittsend.com>
 W:	http://www.wittsend.com/computone.html
 S:	Maintained
 F:	Documentation/serial/computone.txt
 F:	drivers/char/ip2/
 
 CONEXANT ACCESSRUNNER USB DRIVER
-P:	Simon Arlott
-M:	cxacru@fire.lp0.eu
+M:	Simon Arlott <cxacru@fire.lp0.eu>
 L:	accessrunner-general@lists.sourceforge.net
 W:	http://accessrunner.sourceforge.net/
 S:	Maintained
 F:	drivers/usb/atm/cxacru.c
 
 CONFIGFS
-P:	Joel Becker
-M:	joel.becker@oracle.com
+M:	Joel Becker <joel.becker@oracle.com>
 S:	Supported
 F:	fs/configfs/
 F:	include/linux/configfs.h
 
 CONNECTOR
-P:	Evgeniy Polyakov
-M:	zbr@ioremap.net
+M:	Evgeniy Polyakov <zbr@ioremap.net>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/connector/
 
 CONTROL GROUPS (CGROUPS)
-P:	Paul Menage
-M:	menage@google.com
-P:	Li Zefan
-M:	lizf@cn.fujitsu.com
+M:	Paul Menage <menage@google.com>
+M:	Li Zefan <lizf@cn.fujitsu.com>
 L:	containers@lists.linux-foundation.org
 S:	Maintained
 F:	include/linux/cgroup*
@@ -1631,30 +1394,26 @@ F:	kernel/cgroup*
 F:	mm/*cgroup*
 
 CORETEMP HARDWARE MONITORING DRIVER
-P:	Rudolf Marek
-M:	r.marek@assembler.cz
+M:	Rudolf Marek <r.marek@assembler.cz>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/coretemp
 F:	drivers/hwmon/coretemp.c
 
 COSA/SRP SYNC SERIAL DRIVER
-P:	Jan "Yenya" Kasprzak
-M:	kas@fi.muni.cz
+M:	Jan "Yenya" Kasprzak <kas@fi.muni.cz>
 W:	http://www.fi.muni.cz/~kas/cosa/
 S:	Maintained
 F:	drivers/net/wan/cosa*
 
 CPMAC ETHERNET DRIVER
-P:	Florian Fainelli
-M:	florian@openwrt.org
+M:	Florian Fainelli <florian@openwrt.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/cpmac.c
 
 CPU FREQUENCY DRIVERS
-P:	Dave Jones
-M:	davej@redhat.com
+M:	Dave Jones <davej@redhat.com>
 L:	cpufreq@vger.kernel.org
 W:	http://www.codemonkey.org.uk/projects/cpufreq/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davej/cpufreq.git
@@ -1664,15 +1423,13 @@ F:	drivers/cpufreq/
 F:	include/linux/cpufreq.h
 
 CPUID/MSR DRIVER
-P:	H. Peter Anvin
-M:	hpa@zytor.com
+M:	"H. Peter Anvin" <hpa@zytor.com>
 S:	Maintained
 F:	arch/x86/kernel/cpuid.c
 F:	arch/x86/kernel/msr.c
 
 CPUSETS
-P:	Paul Menage
-M:	menage@google.com
+M:	Paul Menage <menage@google.com>
 W:	http://www.bullopensource.org/cpuset/
 W:	http://oss.sgi.com/projects/cpusets/
 S:	Supported
@@ -1687,20 +1444,16 @@ F:	Documentation/filesystems/cramfs.txt
 F:	fs/cramfs/
 
 CRIS PORT
-P:	Mikael Starvik
-M:	starvik@axis.com
-P:	Jesper Nilsson
-M:	jesper.nilsson@axis.com
+M:	Mikael Starvik <starvik@axis.com>
+M:	Jesper Nilsson <jesper.nilsson@axis.com>
 L:	linux-cris-kernel@axis.com
 W:	http://developer.axis.com
 S:	Maintained
 F:	arch/cris/
 
 CRYPTO API
-P:	Herbert Xu
-M:	herbert@gondor.apana.org.au
-P:	David S. Miller
-M:	davem@davemloft.net
+M:	Herbert Xu <herbert@gondor.apana.org.au>
+M:	"David S. Miller" <davem@davemloft.net>
 L:	linux-crypto@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6.git
 S:	Maintained
@@ -1711,58 +1464,50 @@ F:	drivers/crypto/
 F:	include/crypto/
 
 CRYPTOGRAPHIC RANDOM NUMBER GENERATOR
-P:	Neil Horman
-M:	nhorman@tuxdriver.com
+M:	Neil Horman <nhorman@tuxdriver.com>
 L:	linux-crypto@vger.kernel.org
 S:	Maintained
 
 CS5535 Audio ALSA driver
-P:	Jaya Kumar
-M:	jayakumar.alsa@gmail.com
+M:	Jaya Kumar <jayakumar.alsa@gmail.com>
 S:	Maintained
 F:	sound/pci/cs5535audio/
 
 CX18 VIDEO4LINUX DRIVER
-P:	Hans Verkuil
-M:	hverkuil@xs4all.nl
-P:	Andy Walls
-M:	awalls@radix.net
+M:	Hans Verkuil <hverkuil@xs4all.nl>
+M:	Andy Walls <awalls@radix.net>
 L:	ivtv-devel@ivtvdriver.org
-L:	ivtv-users@ivtvdriver.org
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 W:	http://linuxtv.org
+W:	http://www.ivtvdriver.org/index.php/Cx18
 S:	Maintained
 F:	Documentation/video4linux/cx18.txt
 F:	drivers/media/video/cx18/
 
 CXGB3 ETHERNET DRIVER (CXGB3)
-P:	Divy Le Ray
-M:	divy@chelsio.com
+M:	Divy Le Ray <divy@chelsio.com>
 L:	netdev@vger.kernel.org
 W:	http://www.chelsio.com
 S:	Supported
 F:	drivers/net/cxgb3/
 
 CXGB3 IWARP RNIC DRIVER (IW_CXGB3)
-P:	Steve Wise
-M:	swise@chelsio.com
+M:	Steve Wise <swise@chelsio.com>
 L:	general@lists.openfabrics.org
 W:	http://www.openfabrics.org
 S:	Supported
 F:	drivers/infiniband/hw/cxgb3/
 
 CYBERPRO FB DRIVER
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 W:	http://www.arm.linux.org.uk/
 S:	Maintained
 F:	drivers/video/cyber2000fb.*
 
 CYCLADES 2X SYNC CARD DRIVER
-P:	Arnaldo Carvalho de Melo
-M:	acme@ghostprotocols.net
+M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 W:	http://oops.ghostprotocols.net:81/blog
 S:	Maintained
 F:	drivers/net/wan/cycx*
@@ -1779,8 +1524,7 @@ S:	Orphan
 F:	drivers/net/wan/pc300*
 
 DAMA SLAVE for AX.25
-P:	Joerg Reuter
-M:	jreuter@yaina.de
+M:	Joerg Reuter <jreuter@yaina.de>
 W:	http://yaina.de/jreuter/
 W:	http://www.qsl.net/dl1bke/
 L:	linux-hams@vger.kernel.org
@@ -1794,29 +1538,23 @@ F:	net/ax25/ax25_timer.c
 F:	net/ax25/sysctl_net_ax25.c
 
 DAVICOM FAST ETHERNET (DMFE) NETWORK DRIVER
-P:	Tobias Ringstrom
-M:	tori@unhappy.mine.nu
+M:	Tobias Ringstrom <tori@unhappy.mine.nu>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	Documentation/networking/dmfe.txt
 F:	drivers/net/tulip/dmfe.c
 
 DC390/AM53C974 SCSI driver
-P:	Kurt Garloff
-M:	garloff@suse.de
+M:	Kurt Garloff <garloff@suse.de>
 W:	http://www.garloff.de/kurt/linux/dc390/
-P:	Guennadi Liakhovetski
-M:	g.liakhovetski@gmx.de
+M:	Guennadi Liakhovetski <g.liakhovetski@gmx.de>
 S:	Maintained
 F:	drivers/scsi/tmscsim.*
 
 DC395x SCSI driver
-P:	Oliver Neukum
-M:	oliver@neukum.name
-P:	Ali Akcaagac
-M:	aliakc@web.de
-P:	Jamie Lenehan
-M:	lenehan@twibble.org
+M:	Oliver Neukum <oliver@neukum.name>
+M:	Ali Akcaagac <aliakc@web.de>
+M:	Jamie Lenehan <lenehan@twibble.org>
 W:	http://twibble.org/dist/dc395x/
 L:	dc395x@twibble.org
 L:	http://lists.twibble.org/mailman/listinfo/dc395x/
@@ -1825,8 +1563,7 @@ F:	Documentation/scsi/dc395x.txt
 F:	drivers/scsi/dc395x.*
 
 DCCP PROTOCOL
-P:	Arnaldo Carvalho de Melo
-M:	acme@ghostprotocols.net
+M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 L:	dccp@vger.kernel.org
 W:	http://linux-net.osdl.org/index.php/DCCP
 S:	Maintained
@@ -1835,8 +1572,7 @@ F:	include/linux/tfrc.h
 F:	net/dccp/
 
 DECnet NETWORK LAYER
-P:	Christine Caulfield
-M:	christine.caulfield@googlemail.com
+M:	Christine Caulfield <christine.caulfield@googlemail.com>
 W:	http://linux-decnet.sourceforge.net
 L:	linux-decnet-user@lists.sourceforge.net
 S:	Maintained
@@ -1844,40 +1580,34 @@ F:	Documentation/networking/decnet.txt
 F:	net/decnet/
 
 DEFXX FDDI NETWORK DRIVER
-P:	Maciej W. Rozycki
-M:	macro@linux-mips.org
+M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 S:	Maintained
 F:	drivers/net/defxx.*
 
 DELL LAPTOP DRIVER
-P:	Matthew Garrett
-M:	mjg59@srcf.ucam.org
+M:	Matthew Garrett <mjg59@srcf.ucam.org>
 S:	Maintained
 F:	drivers/platform/x86/dell-laptop.c
 
 DELL LAPTOP SMM DRIVER
-P:	Massimo Dal Zotto
-M:	dz@debian.org
+M:	Massimo Dal Zotto <dz@debian.org>
 W:	http://www.debian.org/~dz/i8k/
 S:	Maintained
 F:	drivers/char/i8k.c
 F:	include/linux/i8k.h
 
 DELL SYSTEMS MANAGEMENT BASE DRIVER (dcdbas)
-P:	Doug Warzecha
-M:	Douglas_Warzecha@dell.com
+M:	Doug Warzecha <Douglas_Warzecha@dell.com>
 S:	Maintained
 F:	Documentation/dcdbas.txt
 F:	drivers/firmware/dcdbas.*
 
 DELL WMI EXTRAS DRIVER
-P:	Matthew Garrett
-M:	mjg59@srcf.ucam.org
+M:	Matthew Garrett <mjg59@srcf.ucam.org>
 S:	Maintained
 
 DEVICE NUMBER REGISTRY
-P:	Torben Mathiasen
-M:	device@lanana.org
+M:	Torben Mathiasen <device@lanana.org>
 W:	http://lanana.org/docs/device-list/index.html
 S:	Maintained
 
@@ -1892,8 +1622,7 @@ F:	include/linux/device-mapper.h
 F:	include/linux/dm-*.h
 
 DIGI INTL. EPCA DRIVER
-P:	Digi International, Inc
-M:	Eng.Linux@digi.com
+M:	"Digi International, Inc" <Eng.Linux@digi.com>
 L:	Eng.Linux@digi.com
 W:	http://www.digi.com
 S:	Orphan
@@ -1902,34 +1631,29 @@ F:	drivers/char/epca*
 F:	drivers/char/digi*
 
 DIRECTORY NOTIFICATION (DNOTIFY)
-P:	Eric Paris
-M:	eparis@parisplace.org
+M:	Eric Paris <eparis@parisplace.org>
 S:	Maintained
 F:	Documentation/filesystems/dnotify.txt
 F:	fs/notify/dnotify/
 F:	include/linux/dnotify.h
 
 DISK GEOMETRY AND PARTITION HANDLING
-P:	Andries Brouwer
-M:	aeb@cwi.nl
+M:	Andries Brouwer <aeb@cwi.nl>
 W:	http://www.win.tue.nl/~aeb/linux/Large-Disk.html
 W:	http://www.win.tue.nl/~aeb/linux/zip/zip-1.html
 W:	http://www.win.tue.nl/~aeb/partitions/partition_types-1.html
 S:	Maintained
 
 DISKQUOTA
-P:	Jan Kara
-M:	jack@suse.cz
+M:	Jan Kara <jack@suse.cz>
 S:	Maintained
 F:	Documentation/filesystems/quota.txt
 F:	fs/quota/
 F:	include/linux/quota*.h
 
 DISTRIBUTED LOCK MANAGER (DLM)
-P:	Christine Caulfield
-M:	ccaulfie@redhat.com
-P:	David Teigland
-M:	teigland@redhat.com
+M:	Christine Caulfield <ccaulfie@redhat.com>
+M:	David Teigland <teigland@redhat.com>
 L:	cluster-devel@redhat.com
 W:	http://sources.redhat.com/cluster/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm.git
@@ -1937,52 +1661,44 @@ S:	Supported
 F:	fs/dlm/
 
 DMA GENERIC OFFLOAD ENGINE SUBSYSTEM
-P:	Maciej Sosnowski
-M:	maciej.sosnowski@intel.com
-P:	Dan Williams
-M:	dan.j.williams@intel.com
+M:	Maciej Sosnowski <maciej.sosnowski@intel.com>
+M:	Dan Williams <dan.j.williams@intel.com>
 S:	Supported
 F:	drivers/dma/
 F:	include/linux/dma*
 
 DME1737 HARDWARE MONITOR DRIVER
-P:	Juerg Haefliger
-M:	juergh@gmail.com
+M:	Juerg Haefliger <juergh@gmail.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/dme1737
 F:	drivers/hwmon/dme1737.c
 
 DOCBOOK FOR DOCUMENTATION
-P:	Randy Dunlap
-M:	rdunlap@xenotime.net
+M:	Randy Dunlap <rdunlap@xenotime.net>
 S:	Maintained
 
 DOCKING STATION DRIVER
-P:	Shaohua Li
-M:	shaohua.li@intel.com
+M:	Shaohua Li <shaohua.li@intel.com>
 L:	linux-acpi@vger.kernel.org
 S:	Supported
 F:	drivers/acpi/dock.c
 
 DOCUMENTATION
-P:	Randy Dunlap
-M:	rdunlap@xenotime.net
+M:	Randy Dunlap <rdunlap@xenotime.net>
 L:	linux-doc@vger.kernel.org
 S:	Maintained
 F:	Documentation/
 
 DOUBLETALK DRIVER
-P:	James R. Van Zandt
-M:	jrv@vanzandt.mv.com
+M:	"James R. Van Zandt" <jrv@vanzandt.mv.com>
 L:	blinux-list@redhat.com
 S:	Maintained
 F:	drivers/char/dtlk.c
 F:	include/linux/dtlk.h
 
 DPT_I2O SCSI RAID DRIVER
-P:	Adaptec OEM Raid Solutions
-M:	aacraid@adaptec.com
+M:	Adaptec OEM Raid Solutions <aacraid@adaptec.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://www.adaptec.com/
 S:	Maintained
@@ -1990,8 +1706,7 @@ F:	drivers/scsi/dpt*
 F:	drivers/scsi/dpt/
 
 DRIVER CORE, KOBJECTS, AND SYSFS
-P:	Greg Kroah-Hartman
-M:	gregkh@suse.de
+M:	Greg Kroah-Hartman <gregkh@suse.de>
 T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 S:	Supported
 F:	Documentation/kobject.txt
@@ -2001,52 +1716,45 @@ F:	include/linux/kobj*
 F:	lib/kobj*
 
 DRM DRIVERS
-P:	David Airlie
-M:	airlied@linux.ie
+M:	David Airlie <airlied@linux.ie>
 L:	dri-devel@lists.sourceforge.net
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6.git
 S:	Maintained
 F:	drivers/gpu/drm/
 
 DSCC4 DRIVER
-P:	Francois Romieu
-M:	romieu@fr.zoreil.com
+M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/wan/dscc4.c
 
 DZ DECSTATION DZ11 SERIAL DRIVER
-P:	Maciej W. Rozycki
-M:	macro@linux-mips.org
+M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 S:	Maintained
 F:	drivers/serial/dz.*
 
 EATA-DMA SCSI DRIVER
-P:	Michael Neuffer
-M:	mike@i-Connect.Net
+M:	Michael Neuffer <mike@i-Connect.Net>
 L:	linux-eata@i-connect.net
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/eata*
 
 EATA ISA/EISA/PCI SCSI DRIVER
-P:	Dario Ballabio
-M:	ballabio_dario@emc.com
+M:	Dario Ballabio <ballabio_dario@emc.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/eata.c
 
 EATA-PIO SCSI DRIVER
-P:	Michael Neuffer
-M:	mike@i-Connect.Net
+M:	Michael Neuffer <mike@i-Connect.Net>
 L:	linux-eata@i-connect.net
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/eata_pio.*
 
 EBTABLES
-P:	Bart De Schuymer
-M:	bart.de.schuymer@pandora.be
+M:	Bart De Schuymer <bart.de.schuymer@pandora.be>
 L:	ebtables-user@lists.sourceforge.net
 L:	ebtables-devel@lists.sourceforge.net
 W:	http://ebtables.sourceforge.net/
@@ -2055,10 +1763,8 @@ F:	include/linux/netfilter_bridge/ebt_*.h
 F:	net/bridge/netfilter/ebt*.c
 
 ECRYPT FILE SYSTEM
-P:	Tyler Hicks
-M:	tyhicks@linux.vnet.ibm.com
-P:	Dustin Kirkland
-M:	kirkland@canonical.com
+M:	Tyler Hicks <tyhicks@linux.vnet.ibm.com>
+M:	Dustin Kirkland <kirkland@canonical.com>
 L:	ecryptfs-devel@lists.launchpad.net
 W:	https://launchpad.net/ecryptfs
 S:	Supported
@@ -2066,8 +1772,7 @@ F:	Documentation/filesystems/ecryptfs.txt
 F:	fs/ecryptfs/
 
 EDAC-CORE
-P:	Doug Thompson
-M:	dougthompson@xmission.com
+M:	Doug Thompson <dougthompson@xmission.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Supported
@@ -2076,94 +1781,80 @@ F:	drivers/edac/edac_*
 F:	include/linux/edac.h
 
 EDAC-AMD64
-P:	Doug Thompson
-M:	dougthompson@xmission.com
-P:	Borislav Petkov
-M:	borislav.petkov@amd.com
+M:	Doug Thompson <dougthompson@xmission.com>
+M:	Borislav Petkov <borislav.petkov@amd.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Supported
 F:	drivers/edac/amd64_edac*
 
 EDAC-E752X
-P:	Mark Gross
-M:	mark.gross@intel.com
-P:	Doug Thompson
-M:	dougthompson@xmission.com
+M:	Mark Gross <mark.gross@intel.com>
+M:	Doug Thompson <dougthompson@xmission.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/e752x_edac.c
 
 EDAC-E7XXX
-P:	Doug Thompson
-M:	dougthompson@xmission.com
+M:	Doug Thompson <dougthompson@xmission.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/e7xxx_edac.c
 
 EDAC-I82443BXGX
-P:	Tim Small
-M:	tim@buttersideup.com
+M:	Tim Small <tim@buttersideup.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i82443bxgx_edac.c
 
 EDAC-I3000
-P:	Jason Uhlenkott
-M:	juhlenko@akamai.com
+M:	Jason Uhlenkott <juhlenko@akamai.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i3000_edac.c
 
 EDAC-I5000
-P:	Doug Thompson
-M:	dougthompson@xmission.com
+M:	Doug Thompson <dougthompson@xmission.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i5000_edac.c
 
 EDAC-I5400
-P:	Mauro Carvalho Chehab
-M:	mchehab@redhat.com
+M:	Mauro Carvalho Chehab <mchehab@redhat.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i5400_edac.c
 
 EDAC-I82975X
-P:	Ranganathan Desikan
-M:	ravi@jetztechnologies.com
-P:	Arvind R.
-M:	arvind@jetztechnologies.com
+M:	Ranganathan Desikan <ravi@jetztechnologies.com>
+M:	"Arvind R." <arvind@jetztechnologies.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/i82975x_edac.c
 
 EDAC-PASEMI
-P:	Egor Martovetsky
-M:	egor@pasemi.com
+M:	Egor Martovetsky <egor@pasemi.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/pasemi_edac.c
 
 EDAC-R82600
-P:	Tim Small
-M:	tim@buttersideup.com
+M:	Tim Small <tim@buttersideup.com>
 L:	bluesmoke-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	bluesmoke.sourceforge.net
 S:	Maintained
 F:	drivers/edac/r82600_edac.c
 
 EEEPC LAPTOP EXTRAS DRIVER
-P:	Corentin Chary
-M:	corentincj@iksaif.net
+M:	Corentin Chary <corentincj@iksaif.net>
 L:	acpi4asus-user@lists.sourceforge.net
 W:	http://acpi4asus.sf.net
 S:	Maintained
@@ -2175,66 +1866,54 @@ S:	Orphan
 F:	fs/efs/
 
 EHCA (IBM GX bus InfiniBand adapter) DRIVER
-P:	Hoang-Nam Nguyen
-M:	hnguyen@de.ibm.com
-P:	Christoph Raisch
-M:	raisch@de.ibm.com
+M:	Hoang-Nam Nguyen <hnguyen@de.ibm.com>
+M:	Christoph Raisch <raisch@de.ibm.com>
 L:	general@lists.openfabrics.org
 S:	Supported
 F:	drivers/infiniband/hw/ehca/
 
 EMBEDDED LINUX
-P:	Paul Gortmaker
-M:	paul.gortmaker@windriver.com
-P:	Matt Mackall
-M:	mpm@selenic.com
-P:	David Woodhouse
-M:	dwmw2@infradead.org
+M:	Paul Gortmaker <paul.gortmaker@windriver.com>
+M:	Matt Mackall <mpm@selenic.com>
+M:	David Woodhouse <dwmw2@infradead.org>
 L:	linux-embedded@vger.kernel.org
 S:	Maintained
 
 EMULEX LPFC FC SCSI DRIVER
-P:	James Smart
-M:	james.smart@emulex.com
+M:	James Smart <james.smart@emulex.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://sourceforge.net/projects/lpfcxxxx
 S:	Supported
 F:	drivers/scsi/lpfc/
 
 ENE CB710 FLASH CARD READER DRIVER
-P:	Michał Mirosław
-M:	mirq-linux@rere.qmqm.pl
-L:	linux-kernel@vger.kernel.org
+M:	Michał Mirosław <mirq-linux@rere.qmqm.pl>
 S:	Maintained
 F:	drivers/misc/cb710/
 F:	drivers/mmc/host/cb710-mmc.*
 F:	include/linux/cb710.h
 
 EPSON 1355 FRAMEBUFFER DRIVER
-P:	Christopher Hoover
-M:	ch@murgatroid.com
-P:	Christopher Hoover
-M:	ch@hpl.hp.com
+M:	Christopher Hoover <ch@murgatroid.com>
+M:	Christopher Hoover <ch@hpl.hp.com>
 S:	Maintained
 F:	drivers/video/epson1355fb.c
 
 EPSON S1D13XXX FRAMEBUFFER DRIVER
-P:	Kristoffer Ericson
-M:	kristoffer.ericson@gmail.com
+M:	Kristoffer Ericson <kristoffer.ericson@gmail.com>
 S:	Maintained
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kristoffer/linux-hpc.git
 F:	drivers/video/s1d13xxxfb.c
 F:	include/video/s1d13xxxfb.h
 
 ETHEREXPRESS-16 NETWORK DRIVER
-P:	Philip Blundell
-M:	philb@gnu.org
+M:	Philip Blundell <philb@gnu.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/eexpress.*
 
 ETHERNET BRIDGE
-P:	Stephen Hemminger
-M:	shemminger@linux-foundation.org
+M:	Stephen Hemminger <shemminger@linux-foundation.org>
 L:	bridge@lists.linux-foundation.org
 W:	http://www.linux-foundation.org/en/Net:Bridge
 S:	Maintained
@@ -2242,8 +1921,7 @@ F:	include/linux/netfilter_bridge/
 F:	net/bridge/
 
 ETHERTEAM 16I DRIVER
-P:	Mika Kuoppala
-M:	miku@iki.fi
+M:	Mika Kuoppala <miku@iki.fi>
 S:	Maintained
 F:	drivers/net/eth16i.c
 
@@ -2255,12 +1933,9 @@ F:	fs/ext2/
 F:	include/linux/ext2*
 
 EXT3 FILE SYSTEM
-P:	Stephen Tweedie
-M:	sct@redhat.com
-P:	Andrew Morton
-M:	akpm@linux-foundation.org
-P:	Andreas Dilger
-M:	adilger@sun.com
+M:	Stephen Tweedie <sct@redhat.com>
+M:	Andrew Morton <akpm@linux-foundation.org>
+M:	Andreas Dilger <adilger@sun.com>
 L:	linux-ext4@vger.kernel.org
 S:	Maintained
 F:	Documentation/filesystems/ext3.txt
@@ -2268,10 +1943,8 @@ F:	fs/ext3/
 F:	include/linux/ext3*
 
 EXT4 FILE SYSTEM
-P:	Theodore Ts'o
-M:	tytso@mit.edu
-P:	Andreas Dilger
-M:	adilger@sun.com
+M:	"Theodore Ts'o" <tytso@mit.edu>
+M:	Andreas Dilger <adilger@sun.com>
 L:	linux-ext4@vger.kernel.org
 W:	http://ext4.wiki.kernel.org
 S:	Maintained
@@ -2279,30 +1952,26 @@ F:	Documentation/filesystems/ext4.txt
 F:	fs/ext4/
 
 F71805F HARDWARE MONITORING DRIVER
-P:	Jean Delvare
-M:	khali@linux-fr.org
+M:	Jean Delvare <khali@linux-fr.org>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/f71805f
 F:	drivers/hwmon/f71805f.c
 
 FARSYNC SYNCHRONOUS DRIVER
-P:	Kevin Curtis
-M:	kevin.curtis@farsite.co.uk
+M:	Kevin Curtis <kevin.curtis@farsite.co.uk>
 W:	http://www.farsite.co.uk/
 S:	Supported
 F:	drivers/net/wan/farsync.*
 
 FAULT INJECTION SUPPORT
-P:	Akinobu Mita
-M:	akinobu.mita@gmail.com
+M:	Akinobu Mita <akinobu.mita@gmail.com>
 S:	Supported
 F:	Documentation/fault-injection/
 F:	lib/fault-inject.c
 
 FILE LOCKING (flock() and fcntl()/lockf())
-P:	Matthew Wilcox
-M:	matthew@wil.cx
+M:	Matthew Wilcox <matthew@wil.cx>
 L:	linux-fsdevel@vger.kernel.org
 S:	Maintained
 F:	include/linux/fcntl.h
@@ -2311,25 +1980,21 @@ F:	fs/fcntl.c
 F:	fs/locks.c
 
 FILESYSTEMS (VFS and infrastructure)
-P:	Alexander Viro
-M:	viro@zeniv.linux.org.uk
+M:	Alexander Viro <viro@zeniv.linux.org.uk>
 L:	linux-fsdevel@vger.kernel.org
 S:	Maintained
 F:	fs/*
 
 FINTEK F75375S HARDWARE MONITOR AND FAN CONTROLLER DRIVER
-P:	Riku Voipio
-M:	riku.vipio@iki.fi
+M:	Riku Voipio <riku.vipio@iki.fi>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/f75375s.c
 F:	include/linux/f75375s.h
 
 FIREWIRE SUBSYSTEM
-P:	Kristian Hoegsberg
-M:	krh@redhat.com
-P:	Stefan Richter
-M:	stefanr@s5r6.in-berlin.de
+M:	Kristian Hoegsberg <krh@redhat.com>
+M:	Stefan Richter <stefanr@s5r6.in-berlin.de>
 L:	linux1394-devel@lists.sourceforge.net
 W:	http://www.linux1394.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
@@ -2344,15 +2009,13 @@ F:	drivers/base/firmware*.c
 F:	include/linux/firmware.h
 
 FPU EMULATOR
-P:	Bill Metzenthen
-M:	billm@melbpc.org.au
+M:	Bill Metzenthen <billm@melbpc.org.au>
 W:	http://floatingpoint.sourceforge.net/emulator/index.html
 S:	Maintained
 F:	arch/x86/math-emu/
 
 FRAME RELAY DLCI/FRAD (Sangoma drivers too)
-P:	Mike McLagan
-M:	mike.mclagan@linux.org
+M:	Mike McLagan <mike.mclagan@linux.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/wan/dlci.c
@@ -2367,25 +2030,21 @@ F:	drivers/video/fb*
 F:	include/linux/fb.h
 
 FREESCALE DMA DRIVER
-P:	Li Yang
-M:	leoli@freescale.com
-P:	Zhang Wei
-M:	zw@zh-kernel.org
+M:	Li Yang <leoli@freescale.com>
+M:	Zhang Wei <zw@zh-kernel.org>
 L:	linuxppc-dev@ozlabs.org
 S:	Maintained
 F:	drivers/dma/fsldma.*
 
 FREESCALE I2C CPM DRIVER
-P:	Jochen Friedrich
-M:	jochen@scram.de
+M:	Jochen Friedrich <jochen@scram.de>
 L:	linuxppc-dev@ozlabs.org
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-cpm.c
 
 FREESCALE IMX / MXC FRAMEBUFFER DRIVER
-P:	Sascha Hauer
-M:	kernel@pengutronix.de
+M:	Sascha Hauer <kernel@pengutronix.de>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
@@ -2393,10 +2052,8 @@ F:	arch/arm/plat-mxc/include/mach/imxfb.h
 F:	drivers/video/imxfb.c
 
 FREESCALE SOC FS_ENET DRIVER
-P:	Pantelis Antoniou
-M:	pantelis.antoniou@gmail.com
-P:	Vitaly Bordug
-M:	vbordug@ru.mvista.com
+M:	Pantelis Antoniou <pantelis.antoniou@gmail.com>
+M:	Vitaly Bordug <vbordug@ru.mvista.com>
 L:	linuxppc-dev@ozlabs.org
 L:	netdev@vger.kernel.org
 S:	Maintained
@@ -2404,39 +2061,34 @@ F:	drivers/net/fs_enet/
 F:	include/linux/fs_enet_pd.h
 
 FREESCALE QUICC ENGINE LIBRARY
-P:	Timur Tabi
-M:	timur@freescale.com
+M:	Timur Tabi <timur@freescale.com>
 L:	linuxppc-dev@ozlabs.org
 S:	Supported
 F:	arch/powerpc/sysdev/qe_lib/
 F:	arch/powerpc/include/asm/*qe.h
 
 FREESCALE HIGHSPEED USB DEVICE DRIVER
-P:	Li Yang
-M:	leoli@freescale.com
+M:	Li Yang <leoli@freescale.com>
 L:	linux-usb@vger.kernel.org
 L:	linuxppc-dev@ozlabs.org
 S:	Maintained
 F:	drivers/usb/gadget/fsl_usb2_udc.c
 
 FREESCALE QUICC ENGINE UCC ETHERNET DRIVER
-P:	Li Yang
-M:	leoli@freescale.com
+M:	Li Yang <leoli@freescale.com>
 L:	netdev@vger.kernel.org
 L:	linuxppc-dev@ozlabs.org
 S:	Maintained
 F:	drivers/net/ucc_geth*
 
 FREESCALE QUICC ENGINE UCC UART DRIVER
-P:	Timur Tabi
-M:	timur@freescale.com
+M:	Timur Tabi <timur@freescale.com>
 L:	linuxppc-dev@ozlabs.org
 S:	Supported
 F:	drivers/serial/ucc_uart.c
 
 FREESCALE SOC SOUND DRIVERS
-P:	Timur Tabi
-M:	timur@freescale.com
+M:	Timur Tabi <timur@freescale.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 L:	linuxppc-dev@ozlabs.org
 S:	Supported
@@ -2444,17 +2096,14 @@ F:	sound/soc/fsl/fsl*
 F:	sound/soc/fsl/mpc8610_hpcd.c
 
 FREEVXFS FILESYSTEM
-P:	Christoph Hellwig
-M:	hch@infradead.org
+M:	Christoph Hellwig <hch@infradead.org>
 W:	ftp://ftp.openlinux.org/pub/people/hch/vxfs
 S:	Maintained
 F:	fs/freevxfs/
 
 FREEZER
-P:	Pavel Machek
-M:	pavel@ucw.cz
-P:	Rafael J. Wysocki
-M:	rjw@sisk.pl
+M:	Pavel Machek <pavel@ucw.cz>
+M:	"Rafael J. Wysocki" <rjw@sisk.pl>
 L:	linux-pm@lists.linux-foundation.org
 S:	Supported
 F:	Documentation/power/freezing-of-tasks.txt
@@ -2462,8 +2111,7 @@ F:	include/linux/freezer.h
 F:	kernel/freezer.c
 
 FS-CACHE: LOCAL CACHING FOR NETWORK FILESYSTEMS
-P:	David Howells
-M:	dhowells@redhat.com
+M:	David Howells <dhowells@redhat.com>
 L:	linux-cachefs@redhat.com
 S:	Supported
 F:	Documentation/filesystems/caching/
@@ -2471,8 +2119,7 @@ F:	fs/fscache/
 F:	include/linux/fscache*.h
 
 FTRACE
-P:	Steven Rostedt
-M:	rostedt@goodmis.org
+M:	Steven Rostedt <rostedt@goodmis.org>
 S:	Maintained
 F:	Documentation/trace/ftrace.txt
 F:	arch/*/*/*/ftrace.h
@@ -2481,21 +2128,18 @@ F:	include/*/ftrace.h
 F:	kernel/trace/
 
 FUJITSU FR-V (FRV) PORT
-P:	David Howells
-M:	dhowells@redhat.com
+M:	David Howells <dhowells@redhat.com>
 S:	Maintained
 F:	arch/frv/
 
 FUJITSU LAPTOP EXTRAS
-P:	Jonathan Woithe
-M:	jwoithe@physics.adelaide.edu.au
+M:	Jonathan Woithe <jwoithe@physics.adelaide.edu.au>
 L:	linux-acpi@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/fujitsu-laptop.c
 
 FUSE: FILESYSTEM IN USERSPACE
-P:	Miklos Szeredi
-M:	miklos@szeredi.hu
+M:	Miklos Szeredi <miklos@szeredi.hu>
 L:	fuse-devel@lists.sourceforge.net
 W:	http://fuse.sourceforge.net/
 S:	Maintained
@@ -2503,30 +2147,26 @@ F:	fs/fuse/
 F:	include/linux/fuse.h
 
 FUTURE DOMAIN TMC-16x0 SCSI DRIVER (16-bit)
-P:	Rik Faith
-M:	faith@cs.unc.edu
+M:	Rik Faith <faith@cs.unc.edu>
 L:	linux-scsi@vger.kernel.org
 S:	Odd Fixes (e.g., new signatures)
 F:	drivers/scsi/fdomain.*
 
 GDT SCSI DISK ARRAY CONTROLLER DRIVER
-P:	Achim Leubner
-M:	achim_leubner@adaptec.com
+M:	Achim Leubner <achim_leubner@adaptec.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://www.icp-vortex.com/
 S:	Supported
 F:	drivers/scsi/gdt*
 
 GENERIC GPIO I2C DRIVER
-P:	Haavard Skinnemoen
-M:	hskinnemoen@atmel.com
+M:	Haavard Skinnemoen <hskinnemoen@atmel.com>
 S:	Supported
 F:	drivers/i2c/busses/i2c-gpio.c
 F:	include/linux/i2c-gpio.h
 
 GENERIC HDLC (WAN) DRIVERS
-P:	Krzysztof Halasa
-M:	khc@pm.waw.pl
+M:	Krzysztof Halasa <khc@pm.waw.pl>
 W:	http://www.kernel.org/pub/linux/utils/net/hdlc/
 S:	Maintained
 F:	drivers/net/wan/c101.c
@@ -2538,16 +2178,14 @@ F:	drivers/net/wan/pci200syn.c
 F:	drivers/net/wan/wanxl*
 
 GENERIC INCLUDE/ASM HEADER FILES
-P:	Arnd Bergmann
-M:	arnd@arndb.de
+M:	Arnd Bergmann <arnd@arndb.de>
 L:	linux-arch@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/arnd/asm-generic.git
 S:	Maintained
 F:	include/asm-generic
 
 GFS2 FILE SYSTEM
-P:	Steven Whitehouse
-M:	swhiteho@redhat.com
+M:	Steven Whitehouse <swhiteho@redhat.com>
 L:	cluster-devel@redhat.com
 W:	http://sources.redhat.com/cluster/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/steve/gfs2-2.6-fixes.git
@@ -2558,10 +2196,8 @@ F:	fs/gfs2/
 F:	include/linux/gfs2_ondisk.h
 
 GIGASET ISDN DRIVERS
-P:	Hansjoerg Lipp
-M:	hjlipp@web.de
-P:	Tilman Schmidt
-M:	tilman@imap.cc
+M:	Hansjoerg Lipp <hjlipp@web.de>
+M:	Tilman Schmidt <tilman@imap.cc>
 L:	gigaset307x-common@lists.sourceforge.net
 W:	http://gigaset307x.sourceforge.net/
 S:	Maintained
@@ -2570,8 +2206,7 @@ F:	drivers/isdn/gigaset/
 F:	include/linux/gigaset_dev.h
 
 HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
-P:	Frank Seidel
-M:	frank@f-seidel.de
+M:	Frank Seidel <frank@f-seidel.de>
 L:	lm-sensors@lm-sensors.org
 W:	http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
 S:	Maintained
@@ -2583,40 +2218,35 @@ S:	Odd Fixes
 F:	drivers/char/hvc_*
 
 GSPCA FINEPIX SUBDRIVER
-P:	Frank Zago
-M:	frank@zago.net
+M:	Frank Zago <frank@zago.net>
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
 F:	drivers/media/video/gspca/finepix.c
 
 GSPCA M5602 SUBDRIVER
-P:	Erik Andren
-M:	erik.andren@gmail.com
+M:	Erik Andren <erik.andren@gmail.com>
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
 F:	drivers/media/video/gspca/m5602/
 
 GSPCA PAC207 SONIXB SUBDRIVER
-P:	Hans de Goede
-M:	hdegoede@redhat.com
+M:	Hans de Goede <hdegoede@redhat.com>
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
 F:	drivers/media/video/gspca/pac207.c
 
 GSPCA T613 SUBDRIVER
-P:	Leandro Costantino
-M:	lcostantino@gmail.com
+M:	Leandro Costantino <lcostantino@gmail.com>
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
 F:	drivers/media/video/gspca/t613.c
 
 GSPCA USB WEBCAM DRIVER
-P:	Jean-Francois Moine
-M:	moinejf@free.fr
+M:	Jean-Francois Moine <moinejf@free.fr>
 W:	http://moinejf.free.fr
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -2636,31 +2266,27 @@ F:	drivers/char/hw_random/
 F:	include/linux/hw_random.h
 
 HARMONY SOUND DRIVER
-P:	Kyle McMartin
-M:	kyle@mcmartin.ca
+M:	Kyle McMartin <kyle@mcmartin.ca>
 L:	linux-parisc@vger.kernel.org
 S:	Maintained
 F:	sound/parisc/harmony.*
 
 HAYES ESP SERIAL DRIVER
-P:	Andrew J. Robinson
-M:	arobinso@nyx.net
+M:	"Andrew J. Robinson" <arobinso@nyx.net>
 W:	http://www.nyx.net/~arobinso
 S:	Maintained
 F:	Documentation/serial/hayes-esp.txt
 F:	drivers/char/esp.c
 
 HEWLETT-PACKARD SMART2 RAID DRIVER
-P:	Chirag Kantharia
-M:	chirag.kantharia@hp.com
+M:	Chirag Kantharia <chirag.kantharia@hp.com>
 L:	iss_storagedev@hp.com
 S:	Maintained
 F:	Documentation/blockdev/cpqarray.txt
 F:	drivers/block/cpqarray.*
 
 HEWLETT-PACKARD SMART CISS RAID DRIVER (cciss)
-P:	Mike Miller
-M:	mike.miller@hp.com
+M:	Mike Miller <mike.miller@hp.com>
 L:	iss_storagedev@hp.com
 S:	Supported
 F:	Documentation/blockdev/cciss.txt
@@ -2668,25 +2294,21 @@ F:	drivers/block/cciss*
 F:	include/linux/cciss_ioctl.h
 
 HFS FILESYSTEM
-P:	Roman Zippel
-M:	zippel@linux-m68k.org
+M:	Roman Zippel <zippel@linux-m68k.org>
 S:	Maintained
 F:	Documentation/filesystems/hfs.txt
 F:	fs/hfs/
 
 HGA FRAMEBUFFER DRIVER
-P:	Ferenc Bakonyi
-M:	fero@drama.obuda.kando.hu
+M:	Ferenc Bakonyi <fero@drama.obuda.kando.hu>
 L:	linux-nvidia@lists.surfsouth.com
 W:	http://drama.obuda.kando.hu/~fero/cgi-bin/hgafb.shtml
 S:	Maintained
 F:	drivers/video/hgafb.c
 
 HIBERNATION (aka Software Suspend, aka swsusp)
-P:	Pavel Machek
-M:	pavel@ucw.cz
-P:	Rafael J. Wysocki
-M:	rjw@sisk.pl
+M:	Pavel Machek <pavel@ucw.cz>
+M:	"Rafael J. Wysocki" <rjw@sisk.pl>
 L:	linux-pm@lists.linux-foundation.org
 S:	Supported
 F:	arch/x86/power/
@@ -2698,8 +2320,7 @@ F:	include/linux/pm.h
 F:	arch/*/include/asm/suspend*.h
 
 HID CORE LAYER
-P:	Jiri Kosina
-M:	jkosina@suse.cz
+M:	Jiri Kosina <jkosina@suse.cz>
 L:	linux-input@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
 S:	Maintained
@@ -2707,16 +2328,14 @@ F:	drivers/hid/
 F:	include/linux/hid*
 
 HIGH-RESOLUTION TIMERS, CLOCKEVENTS, DYNTICKS
-P:	Thomas Gleixner
-M:	tglx@linutronix.de
+M:	Thomas Gleixner <tglx@linutronix.de>
 S:	Maintained
 F:	Documentation/timers/
 F:	kernel/hrtimer.c
 F:	include/linux/hrtimer.h
 
 HIGH-SPEED SCC DRIVER FOR AX.25
-P:	Klaus Kudielka
-M:	klaus.kudielka@ieee.org
+M:	Klaus Kudielka <klaus.kudielka@ieee.org>
 L:	linux-hams@vger.kernel.org
 W:	http://www.nt.tuwien.ac.at/~kkudielk/Linux/
 S:	Maintained
@@ -2724,16 +2343,14 @@ F:	drivers/net/hamradio/dmascc.c
 F:	drivers/net/hamradio/scc.c
 
 HIGHPOINT ROCKETRAID 3xxx RAID DRIVER
-P:	HighPoint Linux Team
-M:	linux@highpoint-tech.com
+M:	HighPoint Linux Team <linux@highpoint-tech.com>
 W:	http://www.highpoint-tech.com
 S:	Supported
 F:	Documentation/scsi/hptiop.txt
 F:	drivers/scsi/hptiop.c
 
 HIPPI
-P:	Jes Sorensen
-M:	jes@trained-monkey.org
+M:	Jes Sorensen <jes@trained-monkey.org>
 L:	linux-hippi@sunsite.dk
 S:	Maintained
 F:	include/linux/hippidevice.h
@@ -2741,8 +2358,7 @@ F:	include/linux/if_hippi.h
 F:	net/802/hippi.c
 
 HOST AP DRIVER
-P:	Jouni Malinen
-M:	j@w1.fi
+M:	Jouni Malinen <j@w1.fi>
 L:	hostap@shmoo.com (subscribers-only)
 L:	linux-wireless@vger.kernel.org
 W:	http://hostap.epitest.fi/
@@ -2750,82 +2366,69 @@ S:	Maintained
 F:	drivers/net/wireless/hostap/
 
 HP COMPAQ TC1100 TABLET WMI EXTRAS DRIVER
-P:	Carlos Corbacho
-M:	carlos@strangeworlds.co.uk
+M:	Carlos Corbacho <carlos@strangeworlds.co.uk>
 S:	Odd Fixes
 F:	drivers/platform/x86/tc1100-wmi.c
 
 HP100:	Driver for HP 10/100 Mbit/s Voice Grade Network Adapter Series
-P:	Jaroslav Kysela
-M:	perex@perex.cz
+M:	Jaroslav Kysela <perex@perex.cz>
 S:	Maintained
 F:	drivers/net/hp100.*
 
 HPET:	High Precision Event Timers driver
-P:	Clemens Ladisch
-M:	clemens@ladisch.de
+M:	Clemens Ladisch <clemens@ladisch.de>
 S:	Maintained
 F:	Documentation/timers/hpet.txt
 F:	drivers/char/hpet.c
 F:	include/linux/hpet.h
 
 HPET:	i386
-P:	Venkatesh Pallipadi (Venki)
-M:	venkatesh.pallipadi@intel.com
+M:	"Venkatesh Pallipadi (Venki)" <venkatesh.pallipadi@intel.com>
 S:	Maintained
 F:	arch/x86/kernel/hpet.c
 F:	arch/x86/include/asm/hpet.h
 
 HPET:	x86_64
-P:	Vojtech Pavlik
-M:	vojtech@suse.cz
+M:	Vojtech Pavlik <vojtech@suse.cz>
 S:	Maintained
 
 HPET:	ACPI
-P:	Bob Picco
-M:	bob.picco@hp.com
+M:	Bob Picco <bob.picco@hp.com>
 S:	Maintained
 F:	drivers/char/hpet.c
 
 HPFS FILESYSTEM
-P:	Mikulas Patocka
-M:	mikulas@artax.karlin.mff.cuni.cz
+M:	Mikulas Patocka <mikulas@artax.karlin.mff.cuni.cz>
 W:	http://artax.karlin.mff.cuni.cz/~mikulas/vyplody/hpfs/index-e.cgi
 S:	Maintained
 F:	fs/hpfs/
 
 HSO 3G MODEM DRIVER
-P:	Jan Dumon
-M:	j.dumon@option.com
+M:	Jan Dumon <j.dumon@option.com>
 W:	http://www.pharscape.org
 S:	Maintained
 F:	drivers/net/usb/hso.c
 
 HTCPEN TOUCHSCREEN DRIVER
-P:	Pau Oliva Fora
-M:	pof@eslack.org
+M:	Pau Oliva Fora <pof@eslack.org>
 L:	linux-input@vger.kernel.org
 S:	Maintained
 F:	drivers/input/touchscreen/htcpen.c
 
 HUGETLB FILESYSTEM
-P:	William Irwin
-M:	wli@holomorphy.com
+M:	William Irwin <wli@holomorphy.com>
 S:	Maintained
 F:	fs/hugetlbfs/
 
 I2C/SMBUS STUB DRIVER
-P:	Mark M. Hoffman
-M:	mhoffman@lightlink.com
+M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-stub.c
 
 I2C SUBSYSTEM
-P:	Jean Delvare (PC drivers, core)
-M:	khali@linux-fr.org
-P:	Ben Dooks (embedded platforms)
-M:	ben-linux@fluff.org
+M:	"Jean Delvare (PC drivers, core)" <khali@linux-fr.org>
+M:	"Ben Dooks (embedded platforms)" <ben-linux@fluff.org>
 L:	linux-i2c@vger.kernel.org
 W:	http://i2c.wiki.kernel.org/
 T:	quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/
@@ -2837,30 +2440,25 @@ F:	include/linux/i2c-dev.h
 F:	include/linux/i2c-id.h
 
 I2C-TINY-USB DRIVER
-P:	Till Harbaum
-M:	till@harbaum.org
+M:	Till Harbaum <till@harbaum.org>
 L:	linux-i2c@vger.kernel.org
 W:	http://www.harbaum.org/till/i2c_tiny_usb
 S:	Maintained
 F:	drivers/i2c/busses/i2c-tiny-usb.c
 
 i386 BOOT CODE
-P:	H. Peter Anvin
-M:	hpa@zytor.com
+M:	"H. Peter Anvin" <hpa@zytor.com>
 S:	Maintained
 F:	arch/x86/boot/
 
 i386 SETUP CODE / CPU ERRATA WORKAROUNDS
-P:	H. Peter Anvin
-M:	hpa@zytor.com
+M:	"H. Peter Anvin" <hpa@zytor.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-x86setup.git
 S:	Maintained
 
 IA64 (Itanium) PLATFORM
-P:	Tony Luck
-P:	Fenghua Yu
-M:	tony.luck@intel.com
-M:	fenghua.yu@intel.com
+M:	Tony Luck <tony.luck@intel.com>
+M:	Fenghua Yu <fenghua.yu@intel.com>
 L:	linux-ia64@vger.kernel.org
 W:	http://www.ia64-linux.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/aegl/linux-2.6.git
@@ -2868,29 +2466,25 @@ S:	Maintained
 F:	arch/ia64/
 
 IBM MCA SCSI SUBSYSTEM DRIVER
-P:	Michael Lang
-M:	langa2@kph.uni-mainz.de
+M:	Michael Lang <langa2@kph.uni-mainz.de>
 W:	http://www.uni-mainz.de/~langm000/linux.html
 S:	Maintained
 F:	drivers/scsi/ibmmca.c
 
 IBM Power Linux RAID adapter
-P:	Brian King
-M:	brking@us.ibm.com
+M:	Brian King <brking@us.ibm.com>
 S:	Supported
 F:	drivers/scsi/ipr.*
 
 IBM ServeRAID RAID DRIVER
 P:	Jack Hammer
-P:	Dave Jeffery
-M:	ipslinux@adaptec.com
+M:	Dave Jeffery <ipslinux@adaptec.com>
 W:	http://www.developer.ibm.com/welcome/netfinity/serveraid.html
 S:	Supported
 F:	drivers/scsi/ips.*
 
 IDE SUBSYSTEM
-P:	David S. Miller
-M:	davem@davemloft.net
+M:	"David S. Miller" <davem@davemloft.net>
 L:	linux-ide@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/ide-2.6.git
 S:	Maintained
@@ -2899,25 +2493,21 @@ F:	drivers/ide/
 F:	include/linux/ide.h
 
 IDE/ATAPI DRIVERS
-P:	Borislav Petkov
-M:	petkovbb@gmail.com
+M:	Borislav Petkov <petkovbb@gmail.com>
 L:	linux-ide@vger.kernel.org
 S:	Maintained
 F:	Documentation/cdrom/ide-cd
 F:	drivers/ide/ide-cd*
 
 IDLE-I7300
-P:	Andy Henroid
-M:	andrew.d.henroid@intel.com
+M:	Andy Henroid <andrew.d.henroid@intel.com>
 L:	linux-pm@lists.linux-foundation.org
 S:	Supported
 F:	drivers/idle/i7300_idle.c
 
 IEEE 1394 SUBSYSTEM
-P:	Ben Collins
-M:	ben.collins@ubuntu.com
-P:	Stefan Richter
-M:	stefanr@s5r6.in-berlin.de
+M:	Ben Collins <ben.collins@ubuntu.com>
+M:	Stefan Richter <stefanr@s5r6.in-berlin.de>
 L:	linux1394-devel@lists.sourceforge.net
 W:	http://www.linux1394.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394-2.6.git
@@ -2925,19 +2515,15 @@ S:	Maintained
 F:	drivers/ieee1394/
 
 IEEE 1394 RAW I/O DRIVER
-P:	Dan Dennedy
-M:	dan@dennedy.org
-P:	Stefan Richter
-M:	stefanr@s5r6.in-berlin.de
+M:	Dan Dennedy <dan@dennedy.org>
+M:	Stefan Richter <stefanr@s5r6.in-berlin.de>
 L:	linux1394-devel@lists.sourceforge.net
 S:	Maintained
 F:	drivers/ieee1394/raw1394*
 
 IEEE 802.15.4 SUBSYSTEM
-P:	Dmitry Eremin-Solenikov
-M:	dbaryshkov@gmail.com
-P:	Sergey Lapin
-M:	slapin@ossfans.org
+M:	Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
+M:	Sergey Lapin <slapin@ossfans.org>
 L:	linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	http://apps.sourceforge.net/trac/linux-zigbee
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git
@@ -2946,8 +2532,7 @@ F:	net/ieee802154/
 F:	drivers/ieee802154/
 
 INTEGRITY MEASUREMENT ARCHITECTURE (IMA)
-P:	Mimi Zohar
-M:	zohar@us.ibm.com
+M:	Mimi Zohar <zohar@us.ibm.com>
 S:	Supported
 F:	security/integrity/ima/
 
@@ -2957,12 +2542,9 @@ S:	Orphan
 F:	drivers/video/imsttfb.c
 
 INFINIBAND SUBSYSTEM
-P:	Roland Dreier
-M:	rolandd@cisco.com
-P:	Sean Hefty
-M:	sean.hefty@intel.com
-P:	Hal Rosenstock
-M:	hal.rosenstock@gmail.com
+M:	Roland Dreier <rolandd@cisco.com>
+M:	Sean Hefty <sean.hefty@intel.com>
+M:	Hal Rosenstock <hal.rosenstock@gmail.com>
 L:	general@lists.openfabrics.org (moderated for non-subscribers)
 W:	http://www.openib.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband.git
@@ -2972,65 +2554,55 @@ F:	drivers/infiniband/
 F:	include/linux/if_infiniband.h
 
 INOTIFY
-P:	John McCutchan
-M:	john@johnmccutchan.com
-P:	Robert Love
-M:	rlove@rlove.org
-P:	Eric Paris
-M:	eparis@parisplace.org
+M:	John McCutchan <john@johnmccutchan.com>
+M:	Robert Love <rlove@rlove.org>
+M:	Eric Paris <eparis@parisplace.org>
 S:	Maintained
 F:	Documentation/filesystems/inotify.txt
 F:	fs/notify/inotify/
 F:	include/linux/inotify.h
 
 INPUT (KEYBOARD, MOUSE, JOYSTICK, TOUCHSCREEN) DRIVERS
-P:	Dmitry Torokhov
-M:	dmitry.torokhov@gmail.com
-M:	dtor@mail.ru
+M:	Dmitry Torokhov <dmitry.torokhov@gmail.com>
+M:	Dmitry Torokhov <dtor@mail.ru>
 L:	linux-input@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input.git
 S:	Maintained
 F:	drivers/input/
 
 INTEL FRAMEBUFFER DRIVER (excluding 810 and 815)
-P:	Sylvain Meyer
-M:	sylvain.meyer@worldonline.fr
+M:	Sylvain Meyer <sylvain.meyer@worldonline.fr>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	Documentation/fb/intelfb.txt
 F:	drivers/video/intelfb/
 
 INTEL 810/815 FRAMEBUFFER DRIVER
-P:	Antonino Daplas
-M:	adaplas@gmail.com
+M:	Antonino Daplas <adaplas@gmail.com>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/video/i810/
 
 INTEL MENLOW THERMAL DRIVER
-P:	Sujith Thomas
-M:	sujith.thomas@intel.com
+M:	Sujith Thomas <sujith.thomas@intel.com>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.lesswatts.org/projects/acpi/
 S:	Supported
 F:	drivers/platform/x86/intel_menlow.c
 
 INTEL IA32 MICROCODE UPDATE SUPPORT
-P:	Tigran Aivazian
-M:	tigran@aivazian.fsnet.co.uk
+M:	Tigran Aivazian <tigran@aivazian.fsnet.co.uk>
 S:	Maintained
 F:	arch/x86/kernel/microcode_core.c
 F:	arch/x86/kernel/microcode_intel.c
 
 INTEL I/OAT DMA DRIVER
-P:	Maciej Sosnowski
-M:	maciej.sosnowski@intel.com
+M:	Maciej Sosnowski <maciej.sosnowski@intel.com>
 S:	Supported
 F:	drivers/dma/ioat*
 
 INTEL IOMMU (VT-d)
-P:	David Woodhouse
-M:	dwmw2@infradead.org
+M:	David Woodhouse <dwmw2@infradead.org>
 L:	iommu@lists.linux-foundation.org
 T:	git git://git.infradead.org/iommu-2.6.git
 S:	Supported
@@ -3038,14 +2610,12 @@ F:	drivers/pci/intel-iommu.c
 F:	include/linux/intel-iommu.h
 
 INTEL IOP-ADMA DMA DRIVER
-P:	Dan Williams
-M:	dan.j.williams@intel.com
+M:	Dan Williams <dan.j.williams@intel.com>
 S:	Supported
 F:	drivers/dma/iop-adma.c
 
 INTEL IXP4XX QMGR, NPE, ETHERNET and HSS SUPPORT
-P:	Krzysztof Halasa
-M:	khc@pm.waw.pl
+M:	Krzysztof Halasa <khc@pm.waw.pl>
 S:	Maintained
 F:	arch/arm/mach-ixp4xx/include/mach/qmgr.h
 F:	arch/arm/mach-ixp4xx/include/mach/npe.h
@@ -3055,29 +2625,22 @@ F:	drivers/net/arm/ixp4xx_eth.c
 F:	drivers/net/wan/ixp4xx_hss.c
 
 INTEL IXP4XX RANDOM NUMBER GENERATOR SUPPORT
-P:	Deepak Saxena
-M:	dsaxena@plexity.net
+M:	Deepak Saxena <dsaxena@plexity.net>
 S:	Maintained
 F:	drivers/char/hw_random/ixp4xx-rng.c
 
 INTEL IXP2000 ETHERNET DRIVER
-P:	Lennert Buytenhek
-M:	kernel@wantstofly.org
+M:	Lennert Buytenhek <kernel@wantstofly.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ixp2000/
 
 INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/ixgb/ixgbe)
-P:	Jeff Kirsher
-M:	jeffrey.t.kirsher@intel.com
-P:	Jesse Brandeburg
-M:	jesse.brandeburg@intel.com
-P:	Bruce Allan
-M:	bruce.w.allan@intel.com
-P:	PJ Waskiewicz
-M:	peter.p.waskiewicz.jr@intel.com
-P:	John Ronciak
-M:	john.ronciak@intel.com
+M:	Jeff Kirsher <jeffrey.t.kirsher@intel.com>
+M:	Jesse Brandeburg <jesse.brandeburg@intel.com>
+M:	Bruce Allan <bruce.w.allan@intel.com>
+M:	PJ Waskiewicz <peter.p.waskiewicz.jr@intel.com>
+M:	John Ronciak <john.ronciak@intel.com>
 L:	e1000-devel@lists.sourceforge.net
 W:	http://e1000.sourceforge.net/
 S:	Supported
@@ -3089,12 +2652,9 @@ F:	drivers/net/ixgb/
 F:	drivers/net/ixgbe/
 
 INTEL PRO/WIRELESS 2100 NETWORK CONNECTION SUPPORT
-P:	Zhu Yi
-M:	yi.zhu@intel.com
-P:	James Ketrenos
-M:	jketreno@linux.intel.com
-P:	Reinette Chatre
-M:	reinette.chatre@intel.com
+M:	Zhu Yi <yi.zhu@intel.com>
+M:	James Ketrenos <jketreno@linux.intel.com>
+M:	Reinette Chatre <reinette.chatre@intel.com>
 L:	linux-wireless@vger.kernel.org
 L:	ipw2100-devel@lists.sourceforge.net
 W:	http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
@@ -3104,12 +2664,9 @@ F:	Documentation/networking/README.ipw2100
 F:	drivers/net/wireless/ipw2x00/ipw2100.*
 
 INTEL PRO/WIRELESS 2915ABG NETWORK CONNECTION SUPPORT
-P:	Zhu Yi
-M:	yi.zhu@intel.com
-P:	James Ketrenos
-M:	jketreno@linux.intel.com
-P:	Reinette Chatre
-M:	reinette.chatre@intel.com
+M:	Zhu Yi <yi.zhu@intel.com>
+M:	James Ketrenos <jketreno@linux.intel.com>
+M:	Reinette Chatre <reinette.chatre@intel.com>
 L:	linux-wireless@vger.kernel.org
 L:	ipw2100-devel@lists.sourceforge.net
 W:	http://lists.sourceforge.net/mailman/listinfo/ipw2100-devel
@@ -3119,8 +2676,7 @@ F:	Documentation/networking/README.ipw2200
 F:	drivers/net/wireless/ipw2x00/ipw2200.*
 
 INTEL WIRELESS WIMAX CONNECTION 2400
-P:	Inaky Perez-Gonzalez
-M:	inaky.perez-gonzalez@intel.com
+M:	Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
 M:	linux-wimax@intel.com
 L:	wimax@linuxwimax.org
 S:	Supported
@@ -3130,10 +2686,8 @@ F:	drivers/net/wimax/i2400m/
 F:	include/linux/wimax/i2400m.h
 
 INTEL WIRELESS WIFI LINK (iwlwifi)
-P:	Zhu Yi
-M:	yi.zhu@intel.com
-P:	Reinette Chatre
-M:	reinette.chatre@intel.com
+M:	Zhu Yi <yi.zhu@intel.com>
+M:	Reinette Chatre <reinette.chatre@intel.com>
 L:	linux-wireless@vger.kernel.org
 L:	ipw3945-devel@lists.sourceforge.net
 W:	http://intellinuxwireless.org
@@ -3142,47 +2696,39 @@ S:	Supported
 F:	drivers/net/wireless/iwlwifi/
 
 IOC3 ETHERNET DRIVER
-P:	Ralf Baechle
-M:	ralf@linux-mips.org
+M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-mips@linux-mips.org
 S:	Maintained
 F:	drivers/net/ioc3-eth.c
 
 IOC3 SERIAL DRIVER
-P:	Pat Gefre
-M:	pfg@sgi.com
+M:	Pat Gefre <pfg@sgi.com>
 L:	linux-mips@linux-mips.org
 S:	Maintained
 F:	drivers/serial/ioc3_serial.c
 
 IP MASQUERADING
-P:	Juanjo Ciarlante
-M:	jjciarla@raiz.uncu.edu.ar
+M:	Juanjo Ciarlante <jjciarla@raiz.uncu.edu.ar>
 S:	Maintained
 F:	net/ipv4/netfilter/ipt_MASQUERADE.c
 
 IP1000A 10/100/1000 GIGABIT ETHERNET DRIVER
-P:	Francois Romieu
-M:	romieu@fr.zoreil.com
-P:	Sorbica Shieh
-M:	sorbica@icplus.com.tw
-P:	Jesse Huang
-M:	jesse@icplus.com.tw
+M:	Francois Romieu <romieu@fr.zoreil.com>
+M:	Sorbica Shieh <sorbica@icplus.com.tw>
+M:	Jesse Huang <jesse@icplus.com.tw>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ipg.c
 
 IPATH DRIVER
-P:	Ralph Campbell
-M:	infinipath@qlogic.com
+M:	Ralph Campbell <infinipath@qlogic.com>
 L:	general@lists.openfabrics.org
 T:	git git://git.qlogic.com/ipath-linux-2.6
 S:	Supported
 F:	drivers/infiniband/hw/ipath/
 
 IPMI SUBSYSTEM
-P:	Corey Minyard
-M:	minyard@acm.org
+M:	Corey Minyard <minyard@acm.org>
 L:	openipmi-developer@lists.sourceforge.net
 W:	http://openipmi.sourceforge.net/
 S:	Supported
@@ -3191,20 +2737,16 @@ F:	drivers/char/ipmi/
 F:	include/linux/ipmi*
 
 IPS SCSI RAID DRIVER
-P:	Adaptec OEM Raid Solutions
-M:	aacraid@adaptec.com
+M:	Adaptec OEM Raid Solutions <aacraid@adaptec.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://www.adaptec.com/
 S:	Maintained
 F:	drivers/scsi/ips*
 
 IPVS
-P:	Wensong Zhang
-M:	wensong@linux-vs.org
-P:	Simon Horman
-M:	horms@verge.net.au
-P:	Julian Anastasov
-M:	ja@ssi.bg
+M:	Wensong Zhang <wensong@linux-vs.org>
+M:	Simon Horman <horms@verge.net.au>
+M:	Julian Anastasov <ja@ssi.bg>
 L:	netdev@vger.kernel.org
 L:	lvs-devel@vger.kernel.org
 S:	Maintained
@@ -3212,17 +2754,14 @@ F:	Documentation/networking/ipvs-sysctl.txt
 F:	net/netfilter/ipvs/
 
 IPWIRELESS DRIVER
-P:	Jiri Kosina
-M:	jkosina@suse.cz
-P:	David Sterba
-M:	dsterba@suse.cz
+M:	Jiri Kosina <jkosina@suse.cz>
+M:	David Sterba <dsterba@suse.cz>
 S:	Maintained
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/ipwireless_cs.git
 F:	drivers/char/pcmcia/ipwireless/
 
 IPX NETWORK LAYER
-P:	Arnaldo Carvalho de Melo
-M:	acme@ghostprotocols.net
+M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	include/linux/ipx.h
@@ -3230,8 +2769,7 @@ F:	include/net/ipx.h
 F:	net/ipx/
 
 IRDA SUBSYSTEM
-P:	Samuel Ortiz
-M:	samuel@sortiz.org
+M:	Samuel Ortiz <samuel@sortiz.org>
 L:	irda-users@lists.sourceforge.net (subscribers-only)
 W:	http://irda.sourceforge.net/
 S:	Maintained
@@ -3242,16 +2780,14 @@ F:	include/net/irda/
 F:	net/irda/
 
 ISAPNP
-P:	Jaroslav Kysela
-M:	perex@perex.cz
+M:	Jaroslav Kysela <perex@perex.cz>
 S:	Maintained
 F:	Documentation/isapnp.txt
 F:	drivers/pnp/isapnp/
 F:	include/linux/isapnp.h
 
 ISCSI
-P:	Mike Christie
-M:	michaelc@cs.wisc.edu
+M:	Mike Christie <michaelc@cs.wisc.edu>
 L:	open-iscsi@googlegroups.com
 W:	www.open-iscsi.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mnc/linux-2.6-iscsi.git
@@ -3260,8 +2796,7 @@ F:	drivers/scsi/*iscsi*
 F:	include/scsi/*iscsi*
 
 ISDN SUBSYSTEM
-P:	Karsten Keil
-M:	isdn@linux-pingi.de
+M:	Karsten Keil <isdn@linux-pingi.de>
 L:	isdn4linux@listserv.isdn4linux.de (subscribers-only)
 W:	http://www.isdn4linux.de
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kkeil/isdn-2.6.git
@@ -3272,18 +2807,15 @@ F:	include/linux/isdn.h
 F:	include/linux/isdn/
 
 ISDN SUBSYSTEM (Eicon active card driver)
-P:	Armin Schindler
-M:	mac@melware.de
+M:	Armin Schindler <mac@melware.de>
 L:	isdn4linux@listserv.isdn4linux.de (subscribers-only)
 W:	http://www.melware.de
 S:	Maintained
 F:	drivers/isdn/hardware/eicon/
 
 IVTV VIDEO4LINUX DRIVER
-P:	Hans Verkuil
-M:	hverkuil@xs4all.nl
+M:	Hans Verkuil <hverkuil@xs4all.nl>
 L:	ivtv-devel@ivtvdriver.org
-L:	ivtv-users@ivtvdriver.org
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 W:	http://www.ivtvdriver.org
@@ -3293,8 +2825,7 @@ F:	drivers/media/video/ivtv/
 F:	include/linux/ivtv*
 
 JFS FILESYSTEM
-P:	Dave Kleikamp
-M:	shaggy@linux.vnet.ibm.com
+M:	Dave Kleikamp <shaggy@linux.vnet.ibm.com>
 L:	jfs-discussion@lists.sourceforge.net
 W:	http://jfs.sourceforge.net/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6.git
@@ -3303,15 +2834,13 @@ F:	Documentation/filesystems/jfs.txt
 F:	fs/jfs/
 
 JME NETWORK DRIVER
-P:	Guo-Fu Tseng
-M:	cooldavid@cooldavid.org
+M:	Guo-Fu Tseng <cooldavid@cooldavid.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/jme.*
 
 JOURNALLING FLASH FILE SYSTEM V2 (JFFS2)
-P:	David Woodhouse
-M:	dwmw2@infradead.org
+M:	David Woodhouse <dwmw2@infradead.org>
 L:	linux-mtd@lists.infradead.org
 W:	http://www.linux-mtd.infradead.org/doc/jffs2.html
 S:	Maintained
@@ -3319,10 +2848,8 @@ F:	fs/jffs2/
 F:	include/linux/jffs2.h
 
 JOURNALLING LAYER FOR BLOCK DEVICES (JBD)
-P:	Stephen Tweedie
-M:	sct@redhat.com
-P:	Andrew Morton
-M:	akpm@linux-foundation.org
+M:	Stephen Tweedie <sct@redhat.com>
+M:	Andrew Morton <akpm@linux-foundation.org>
 L:	linux-ext4@vger.kernel.org
 S:	Maintained
 F:	fs/jbd*/
@@ -3330,48 +2857,41 @@ F:	include/linux/ext*jbd*.h
 F:	include/linux/jbd*.h
 
 K8TEMP HARDWARE MONITORING DRIVER
-P:	Rudolf Marek
-M:	r.marek@assembler.cz
+M:	Rudolf Marek <r.marek@assembler.cz>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/k8temp
 F:	drivers/hwmon/k8temp.c
 
 KCONFIG
-P:	Roman Zippel
-M:	zippel@linux-m68k.org
+M:	Roman Zippel <zippel@linux-m68k.org>
 L:	linux-kbuild@vger.kernel.org
 S:	Maintained
 F:	Documentation/kbuild/kconfig-language.txt
 F:	scripts/kconfig/
 
 KDUMP
-P:	Vivek Goyal
-M:	vgoyal@redhat.com
-P:	Haren Myneni
-M:	hbabu@us.ibm.com
+M:	Vivek Goyal <vgoyal@redhat.com>
+M:	Haren Myneni <hbabu@us.ibm.com>
 L:	kexec@lists.infradead.org
 W:	http://lse.sourceforge.net/kdump/
 S:	Maintained
 F:	Documentation/kdump/
 
 KERNEL AUTOMOUNTER (AUTOFS)
-P:	H. Peter Anvin
-M:	hpa@zytor.com
+M:	"H. Peter Anvin" <hpa@zytor.com>
 L:	autofs@linux.kernel.org
 S:	Odd Fixes
 F:	fs/autofs/
 
 KERNEL AUTOMOUNTER v4 (AUTOFS4)
-P:	Ian Kent
-M:	raven@themaw.net
+M:	Ian Kent <raven@themaw.net>
 L:	autofs@linux.kernel.org
 S:	Maintained
 F:	fs/autofs4/
 
 KERNEL BUILD
-P:	Sam Ravnborg
-M:	sam@ravnborg.org
+M:	Sam Ravnborg <sam@ravnborg.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-next.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild-fixes.git
 L:	linux-kbuild@vger.kernel.org
@@ -3381,16 +2901,13 @@ F:	Makefile
 F:	scripts/Makefile.*
 
 KERNEL JANITORS
-P:	Several
 L:	kernel-janitors@vger.kernel.org
 W:	http://www.kerneljanitors.org/
-S:	Maintained
+S:	Odd fixes
 
 KERNEL NFSD, SUNRPC, AND LOCKD SERVERS
-P:	J. Bruce Fields
-M:	bfields@fieldses.org
-P:	Neil Brown
-M:	neilb@suse.de
+M:	"J. Bruce Fields" <bfields@fieldses.org>
+M:	Neil Brown <neilb@suse.de>
 L:	linux-nfs@vger.kernel.org
 W:	http://nfs.sourceforge.net/
 S:	Supported
@@ -3403,8 +2920,7 @@ F:	include/linux/lockd/
 F:	include/linux/sunrpc/
 
 KERNEL VIRTUAL MACHINE (KVM)
-P:	Avi Kivity
-M:	avi@redhat.com
+M:	Avi Kivity <avi@redhat.com>
 L:	kvm@vger.kernel.org
 W:	http://kvm.qumranet.com
 S:	Supported
@@ -3415,8 +2931,7 @@ F:	include/linux/kvm*
 F:	virt/kvm/
 
 KERNEL VIRTUAL MACHINE (KVM) FOR AMD-V
-P:	Joerg Roedel
-M:	joerg.roedel@amd.com
+M:	Joerg Roedel <joerg.roedel@amd.com>
 L:	kvm@vger.kernel.org
 W:	http://kvm.qumranet.com
 S:	Supported
@@ -3425,8 +2940,7 @@ F:	arch/x86/kvm/kvm_svm.h
 F:	arch/x86/kvm/svm.c
 
 KERNEL VIRTUAL MACHINE (KVM) FOR POWERPC
-P:	Hollis Blanchard
-M:	hollisb@us.ibm.com
+M:	Hollis Blanchard <hollisb@us.ibm.com>
 L:	kvm-ppc@vger.kernel.org
 W:	http://kvm.qumranet.com
 S:	Supported
@@ -3434,8 +2948,7 @@ F:	arch/powerpc/include/asm/kvm*
 F:	arch/powerpc/kvm/
 
 KERNEL VIRTUAL MACHINE For Itanium (KVM/IA64)
-P:	Xiantao Zhang
-M:	xiantao.zhang@intel.com
+M:	Xiantao Zhang <xiantao.zhang@intel.com>
 L:	kvm-ia64@vger.kernel.org
 W:	http://kvm.qumranet.com
 S:	Supported
@@ -3444,10 +2957,8 @@ F:	arch/ia64/include/asm/kvm*
 F:	arch/ia64/kvm/
 
 KERNEL VIRTUAL MACHINE for s390 (KVM/s390)
-P:	Carsten Otte
-M:	cotte@de.ibm.com
-P:	Christian Borntraeger
-M:	borntraeger@de.ibm.com
+M:	Carsten Otte <cotte@de.ibm.com>
+M:	Christian Borntraeger <borntraeger@de.ibm.com>
 M:	linux390@de.ibm.com
 L:	linux-s390@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -3457,8 +2968,7 @@ F:	arch/s390/include/asm/kvm*
 F:	arch/s390/kvm/
 
 KEXEC
-P:	Eric Biederman
-M:	ebiederm@xmission.com
+M:	Eric Biederman <ebiederm@xmission.com>
 W:	http://ftp.kernel.org/pub/linux/kernel/people/horms/kexec-tools/
 L:	kexec@lists.infradead.org
 S:	Maintained
@@ -3466,8 +2976,7 @@ F:	include/linux/kexec.h
 F:	kernel/kexec.c
 
 KGDB
-P:	Jason Wessel
-M:	jason.wessel@windriver.com
+M:	Jason Wessel <jason.wessel@windriver.com>
 L:	kgdb-bugreport@lists.sourceforge.net
 S:	Maintained
 F:	Documentation/DocBook/kgdb.tmpl
@@ -3477,17 +2986,13 @@ F:	include/linux/kgdb.h
 F:	kernel/kgdb.c
 
 KMEMCHECK
-P:	Vegard Nossum
-M:	vegardno@ifi.uio.no
+M:	Vegard Nossum <vegardno@ifi.uio.no>
 P	Pekka Enberg
 M:	penberg@cs.helsinki.fi
-L:	linux-kernel@vger.kernel.org
 S:	Maintained
 
 KMEMLEAK
-P:	Catalin Marinas
-M:	catalin.marinas@arm.com
-L:	linux-kernel@vger.kernel.org
+M:	Catalin Marinas <catalin.marinas@arm.com>
 S:	Maintained
 F:	Documentation/kmemleak.txt
 F:	include/linux/kmemleak.h
@@ -3495,30 +3000,24 @@ F:	mm/kmemleak.c
 F:	mm/kmemleak-test.c
 
 KMEMTRACE
-P:	Eduard - Gabriel Munteanu
-M:	eduard.munteanu@linux360.ro
+M:	Eduard - Gabriel Munteanu <eduard.munteanu@linux360.ro>
 S:	Maintained
 F:	Documentation/trace/kmemtrace.txt
 F:	include/linux/kmemtrace.h
 F:	kernel/trace/kmemtrace.c
 
 KPROBES
-P:	Ananth N Mavinakayanahalli
-M:	ananth@in.ibm.com
-P:	Anil S Keshavamurthy
-M:	anil.s.keshavamurthy@intel.com
-P:	David S. Miller
-M:	davem@davemloft.net
-P:	Masami Hiramatsu
-M:	mhiramat@redhat.com
+M:	Ananth N Mavinakayanahalli <ananth@in.ibm.com>
+M:	Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com>
+M:	"David S. Miller" <davem@davemloft.net>
+M:	Masami Hiramatsu <mhiramat@redhat.com>
 S:	Maintained
 F:	Documentation/kprobes.txt
 F:	include/linux/kprobes.h
 F:	kernel/kprobes.c
 
 KS0108 LCD CONTROLLER DRIVER
-P:	Miguel Ojeda Sandonis
-M:	miguel.ojeda.sandonis@gmail.com
+M:	Miguel Ojeda Sandonis <miguel.ojeda.sandonis@gmail.com>
 W:	http://miguelojeda.es/auxdisplay.htm
 W:	http://jair.lab.fi.uva.es/~migojed/auxdisplay.htm
 S:	Maintained
@@ -3534,31 +3033,27 @@ F:	include/*/lapb.h
 F:	net/lapb/
 
 LASI 53c700 driver for PARISC
-P:	James E.J. Bottomley
-M:	James.Bottomley@HansenPartnership.com
+M:	"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	Documentation/scsi/53c700.txt
 F:	drivers/scsi/53c700*
 
 LED SUBSYSTEM
-P:	Richard Purdie
-M:	rpurdie@rpsys.net
+M:	Richard Purdie <rpurdie@rpsys.net>
 S:	Maintained
 F:	drivers/leds/
 F:	include/linux/leds.h
 
 LEGO USB Tower driver
-P:	Juergen Stuber
-M:	starblue@users.sourceforge.net
+M:	Juergen Stuber <starblue@users.sourceforge.net>
 L:	legousb-devel@lists.sourceforge.net
 W:	http://legousb.sourceforge.net/
 S:	Maintained
 F:	drivers/usb/misc/legousbtower.c
 
 LGUEST
-P:	Rusty Russell
-M:	rusty@rustcorp.com.au
+M:	Rusty Russell <rusty@rustcorp.com.au>
 L:	lguest@ozlabs.org
 W:	http://lguest.ozlabs.org/
 S:	Maintained
@@ -3569,119 +3064,100 @@ F:	include/linux/lguest*.h
 F:	arch/x86/include/asm/lguest*.h
 
 LINUX FOR IBM pSERIES (RS/6000)
-P:	Paul Mackerras
-M:	paulus@au.ibm.com
+M:	Paul Mackerras <paulus@au.ibm.com>
 W:	http://www.ibm.com/linux/ltc/projects/ppc
 S:	Supported
 
 LINUX FOR POWERPC (32-BIT AND 64-BIT)
-P:	Benjamin Herrenschmidt
-M:	benh@kernel.crashing.org
-P:	Paul Mackerras
-M:	paulus@samba.org
+M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
+M:	Paul Mackerras <paulus@samba.org>
 W:	http://www.penguinppc.org/
 L:	linuxppc-dev@ozlabs.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc.git
 S:	Supported
 
 LINUX FOR POWER MACINTOSH
-P:	Benjamin Herrenschmidt
-M:	benh@kernel.crashing.org
+M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
 W:	http://www.penguinppc.org/
 L:	linuxppc-dev@ozlabs.org
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED MPC5XXX
-P:	Grant Likely
-M:	grant.likely@secretlab.ca
+M:	Grant Likely <grant.likely@secretlab.ca>
 L:	linuxppc-dev@ozlabs.org
 T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED PPC4XX
-P:	Josh Boyer
-M:	jwboyer@linux.vnet.ibm.com
-P:	Matt Porter
-M:	mporter@kernel.crashing.org
+M:	Josh Boyer <jwboyer@linux.vnet.ibm.com>
+M:	Matt Porter <mporter@kernel.crashing.org>
 W:	http://www.penguinppc.org/
 L:	linuxppc-dev@ozlabs.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jwboyer/powerpc-4xx.git
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED XILINX VIRTEX
-P:	Grant Likely
-M:	grant.likely@secretlab.ca
+M:	Grant Likely <grant.likely@secretlab.ca>
 W:	http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex
 L:	linuxppc-dev@ozlabs.org
 T:	git git://git.secretlab.ca/git/linux-2.6.git
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED PPC8XX
-P:	Vitaly Bordug
-M:	vitb@kernel.crashing.org
-P:	Marcelo Tosatti
-M:	marcelo@kvack.org
+M:	Vitaly Bordug <vitb@kernel.crashing.org>
+M:	Marcelo Tosatti <marcelo@kvack.org>
 W:	http://www.penguinppc.org/
 L:	linuxppc-dev@ozlabs.org
 S:	Maintained
 
 LINUX FOR POWERPC EMBEDDED PPC83XX AND PPC85XX
-P:	Kumar Gala
-M:	galak@kernel.crashing.org
+M:	Kumar Gala <galak@kernel.crashing.org>
 W:	http://www.penguinppc.org/
 L:	linuxppc-dev@ozlabs.org
 S:	Maintained
 
 LINUX FOR POWERPC PA SEMI PWRFICIENT
-P:	Olof Johansson
-M:	olof@lixom.net
+M:	Olof Johansson <olof@lixom.net>
 W:	http://www.pasemi.com/
 L:	linuxppc-dev@ozlabs.org
 S:	Supported
 
 LINUX SECURITY MODULE (LSM) FRAMEWORK
-P:	Chris Wright
-M:	chrisw@sous-sol.org
+M:	Chris Wright <chrisw@sous-sol.org>
 L:	linux-security-module@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/chrisw/lsm-2.6.git
 S:	Supported
 
 LLC (802.2)
-P:	Arnaldo Carvalho de Melo
-M:	acme@ghostprotocols.net
+M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 S:	Maintained
 F:	include/linux/llc.h
 F:	include/net/llc*
 F:	net/llc/
 
 LIS3LV02D ACCELEROMETER DRIVER
-P:	Eric Piel
-M:	eric.piel@tremplin-utc.net
+M:	Eric Piel <eric.piel@tremplin-utc.net>
 S:	Maintained
 F:	Documentation/hwmon/lis3lv02d
 F:	drivers/hwmon/lis3lv02d.*
 
 LM83 HARDWARE MONITOR DRIVER
-P:	Jean Delvare
-M:	khali@linux-fr.org
+M:	Jean Delvare <khali@linux-fr.org>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/lm83
 F:	drivers/hwmon/lm83.c
 
 LM90 HARDWARE MONITOR DRIVER
-P:	Jean Delvare
-M:	khali@linux-fr.org
+M:	Jean Delvare <khali@linux-fr.org>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/lm90
 F:	drivers/hwmon/lm90.c
 
 LOCKDEP AND LOCKSTAT
-P:	Peter Zijlstra
-M:	peterz@infradead.org
-P:	Ingo Molnar
-M:	mingo@redhat.com
+M:	Peter Zijlstra <peterz@infradead.org>
+M:	Ingo Molnar <mingo@redhat.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/peterz/linux-2.6-lockdep.git
 S:	Maintained
 F:	Documentation/lockdep*.txt
@@ -3690,8 +3166,7 @@ F:	include/linux/lockdep.h
 F:	kernel/lockdep*
 
 LOGICAL DISK MANAGER SUPPORT (LDM, Windows 2000/XP/Vista Dynamic Disks)
-P:	Richard Russon (FlatCap)
-M:	ldm@flatcap.org
+M:	"Richard Russon (FlatCap)" <ldm@flatcap.org>
 L:	linux-ntfs-dev@lists.sourceforge.net
 W:	http://www.linux-ntfs.org/content/view/19/37/
 S:	Maintained
@@ -3699,8 +3174,7 @@ F:	Documentation/ldm.txt
 F:	fs/partitions/ldm.*
 
 LSILOGIC MPT FUSION DRIVERS (FC/SAS/SPI)
-P:	Eric Moore
-M:	Eric.Moore@lsi.com
+M:	Eric Moore <Eric.Moore@lsi.com>
 M:	support@lsi.com
 L:	DL-MPTFusionLinux@lsi.com
 L:	linux-scsi@vger.kernel.org
@@ -3709,25 +3183,21 @@ S:	Supported
 F:	drivers/message/fusion/
 
 LSILOGIC/SYMBIOS/NCR 53C8XX and 53C1010 PCI-SCSI drivers
-P:	Matthew Wilcox
-M:	matthew@wil.cx
+M:	Matthew Wilcox <matthew@wil.cx>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/sym53c8xx_2/
 
 LTP (Linux Test Project)
-P:	Subrata Modak
-M:	subrata@linux.vnet.ibm.com
-P:	Mike Frysinger
-M:	vapier@gentoo.org
+M:	Subrata Modak <subrata@linux.vnet.ibm.com>
+M:	Mike Frysinger <vapier@gentoo.org>
 L:	ltp-list@lists.sourceforge.net (subscribers-only)
 W:	http://ltp.sourceforge.net/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/galak/ltp.git
 S:	Maintained
 
 M32R ARCHITECTURE
-P:	Hirokazu Takata
-M:	takata@linux-m32r.org
+M:	Hirokazu Takata <takata@linux-m32r.org>
 L:	linux-m32r@ml.linux-m32r.org
 L:	linux-m32r-ja@ml.linux-m32r.org (in Japanese)
 W:	http://www.linux-m32r.org/
@@ -3735,10 +3205,8 @@ S:	Maintained
 F:	arch/m32r/
 
 M68K ARCHITECTURE
-P:	Geert Uytterhoeven
-M:	geert@linux-m68k.org
-P:	Roman Zippel
-M:	zippel@linux-m68k.org
+M:	Geert Uytterhoeven <geert@linux-m68k.org>
+M:	Roman Zippel <zippel@linux-m68k.org>
 L:	linux-m68k@lists.linux-m68k.org
 W:	http://www.linux-m68k.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k.git
@@ -3747,23 +3215,20 @@ F:	arch/m68k/
 F:	drivers/zorro/
 
 M68K ON APPLE MACINTOSH
-P:	Joshua Thompson
-M:	funaho@jurai.org
+M:	Joshua Thompson <funaho@jurai.org>
 W:	http://www.mac.linux-m68k.org/
 L:	linux-m68k@lists.linux-m68k.org
 S:	Maintained
 F:	arch/m68k/mac/
 
 M68K ON HP9000/300
-P:	Philip Blundell
-M:	philb@gnu.org
+M:	Philip Blundell <philb@gnu.org>
 W:	http://www.tazenda.demon.co.uk/phil/linux-hp
 S:	Maintained
 F:	arch/m68k/hp300/
 
 MAC80211
-P:	Johannes Berg
-M:	johannes@sipsolutions.net
+M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
@@ -3773,10 +3238,8 @@ F:	include/net/mac80211.h
 F:	net/mac80211/
 
 MAC80211 PID RATE CONTROL
-P:	Stefano Brivio
-M:	stefano.brivio@polimi.it
-P:	Mattias Nissler
-M:	mattias.nissler@gmx.de
+M:	Stefano Brivio <stefano.brivio@polimi.it>
+M:	Mattias Nissler <mattias.nissler@gmx.de>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/en/developers/Documentation/mac80211/RateControl/PID
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
@@ -3784,67 +3247,57 @@ S:	Maintained
 F:	net/mac80211/rc80211_pid*
 
 MACVLAN DRIVER
-P:	Patrick McHardy
-M:	kaber@trash.net
+M:	Patrick McHardy <kaber@trash.net>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/macvlan.c
 F:	include/linux/if_macvlan.h
 
 MAN-PAGES: MANUAL PAGES FOR LINUX -- Sections 2, 3, 4, 5, and 7
-P:	Michael Kerrisk
-M:	mtk.manpages@gmail.com
+M:	Michael Kerrisk <mtk.manpages@gmail.com>
 W:	http://www.kernel.org/doc/man-pages
 L:	linux-man@vger.kernel.org
 S:	Maintained
 
 MARVELL LIBERTAS WIRELESS DRIVER
-P:	Dan Williams
-M:	dcbw@redhat.com
+M:	Dan Williams <dcbw@redhat.com>
 L:	libertas-dev@lists.infradead.org
 S:	Maintained
 F:	drivers/net/wireless/libertas/
 
 MARVELL MV643XX ETHERNET DRIVER
-P:	Lennert Buytenhek
-M:	buytenh@marvell.com
+M:	Lennert Buytenhek <buytenh@marvell.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/mv643xx_eth.*
 F:	include/linux/mv643xx.h
 
 MARVELL SOC MMC/SD/SDIO CONTROLLER DRIVER
-P:	Nicolas Pitre
-M:	nico@cam.org
+M:	Nicolas Pitre <nico@cam.org>
 S:	Maintained
 
 MARVELL YUKON / SYSKONNECT DRIVER
-P:	Mirko Lindner
-M:	mlindner@syskonnect.de
-P:	Ralph Roesler
-M:	rroesler@syskonnect.de
+M:	Mirko Lindner <mlindner@syskonnect.de>
+M:	Ralph Roesler <rroesler@syskonnect.de>
 W:	http://www.syskonnect.com
 S:	Supported
 
 MATROX FRAMEBUFFER DRIVER
-P:	Petr Vandrovec
-M:	vandrove@vc.cvut.cz
+M:	Petr Vandrovec <vandrove@vc.cvut.cz>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/video/matrox/matroxfb_*
 F:	include/linux/matroxfb.h
 
 MAX6650 HARDWARE MONITOR AND FAN CONTROLLER DRIVER
-P:	Hans J. Koch
-M:	hjk@linutronix.de
+M:	"Hans J. Koch" <hjk@linutronix.de>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/max6650
 F:	drivers/hwmon/max6650.c
 
 MEDIA INPUT INFRASTRUCTURE (V4L/DVB)
-P:	Mauro Carvalho Chehab
-M:	mchehab@infradead.org
+M:	Mauro Carvalho Chehab <mchehab@infradead.org>
 P:	LinuxTV.org Project
 L:	linux-media@vger.kernel.org
 W:	http://linuxtv.org
@@ -3858,8 +3311,7 @@ F:	include/linux/dvb/
 F:	include/linux/videodev*.h
 
 MEGARAID SCSI DRIVERS
-P:	Neela Syam Kolli
-M:	megaraidlinux@lsi.com
+M:	Neela Syam Kolli <megaraidlinux@lsi.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://megaraid.lsilogic.com
 S:	Maintained
@@ -3875,19 +3327,15 @@ F:	include/linux/mm.h
 F:	mm/
 
 MEMORY RESOURCE CONTROLLER
-P:	Balbir Singh
-M:	balbir@linux.vnet.ibm.com
-P:	Pavel Emelyanov
-M:	xemul@openvz.org
-P:	KAMEZAWA Hiroyuki
-M:	kamezawa.hiroyu@jp.fujitsu.com
+M:	Balbir Singh <balbir@linux.vnet.ibm.com>
+M:	Pavel Emelyanov <xemul@openvz.org>
+M:	KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	mm/memcontrol.c
 
 MEMORY TECHNOLOGY DEVICES (MTD)
-P:	David Woodhouse
-M:	dwmw2@infradead.org
+M:	David Woodhouse <dwmw2@infradead.org>
 W:	http://www.linux-mtd.infradead.org/
 L:	linux-mtd@lists.infradead.org
 T:	git git://git.infradead.org/mtd-2.6.git
@@ -3897,8 +3345,7 @@ F:	include/linux/mtd/
 F:	include/mtd/
 
 MICROBLAZE ARCHITECTURE
-P:	Michal Simek
-M:	monstr@monstr.eu
+M:	Michal Simek <monstr@monstr.eu>
 L:	microblaze-uclinux@itee.uq.edu.au
 W:	http://www.monstr.eu/fdt/
 T:	git git://git.monstr.eu/linux-2.6-microblaze.git
@@ -3906,14 +3353,12 @@ S:	Supported
 F:	arch/microblaze/
 
 MICROTEK X6 SCANNER
-P:	Oliver Neukum
-M:	oliver@neukum.name
+M:	Oliver Neukum <oliver@neukum.name>
 S:	Maintained
 F:	drivers/usb/image/microtek.*
 
 MIPS
-P:	Ralf Baechle
-M:	ralf@linux-mips.org
+M:	Ralf Baechle <ralf@linux-mips.org>
 W:	http://www.linux-mips.org/
 L:	linux-mips@linux-mips.org
 T:	git git://git.linux-mips.org/pub/scm/linux.git
@@ -3922,8 +3367,7 @@ F:	Documentation/mips/
 F:	arch/mips/
 
 MISCELLANEOUS MCA-SUPPORT
-P:	James Bottomley
-M:	James.Bottomley@HansenPartnership.com
+M:	James Bottomley <James.Bottomley@HansenPartnership.com>
 S:	Maintained
 F:	Documentation/ia64/mca.txt
 F:	Documentation/mca.txt
@@ -3931,15 +3375,13 @@ F:	drivers/mca/
 F:	include/linux/mca*
 
 MODULE SUPPORT
-P:	Rusty Russell
-M:	rusty@rustcorp.com.au
+M:	Rusty Russell <rusty@rustcorp.com.au>
 S:	Maintained
 F:	include/linux/module.h
 F:	kernel/module.c
 
 MOTION EYE VAIO PICTUREBOOK CAMERA DRIVER
-P:	Stelian Pop
-M:	stelian@popies.net
+M:	Stelian Pop <stelian@popies.net>
 W:	http://popies.net/meye/
 S:	Maintained
 F:	Documentation/video4linux/meye.txt
@@ -3947,135 +3389,111 @@ F:	drivers/media/video/meye.*
 F:	include/linux/meye.h
 
 MOTOROLA IMX MMC/SD HOST CONTROLLER INTERFACE DRIVER
-P:	Pavel Pisa
-M:	ppisa@pikron.com
+M:	Pavel Pisa <ppisa@pikron.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Maintained
 F:	drivers/mmc/host/imxmmc.*
 
 MOUSE AND MISC DEVICES [GENERAL]
-P:	Alessandro Rubini
-M:	rubini@ipvvis.unipv.it
+M:	Alessandro Rubini <rubini@ipvvis.unipv.it>
 S:	Maintained
 F:	drivers/input/mouse/
 F:	include/linux/gpio_mouse.h
 
 MOXA SMARTIO/INDUSTIO/INTELLIO SERIAL CARD
-P:	Jiri Slaby
-M:	jirislaby@gmail.com
+M:	Jiri Slaby <jirislaby@gmail.com>
 S:	Maintained
 F:	Documentation/serial/moxa-smartio
 F:	drivers/char/mxser.*
 
 MSI LAPTOP SUPPORT
-P:	Lennart Poettering
-M:	mzxreary@0pointer.de
+M:	Lennart Poettering <mzxreary@0pointer.de>
 W:	https://tango.0pointer.de/mailman/listinfo/s270-linux
 W:	http://0pointer.de/lennart/tchibo.html
 S:	Maintained
 F:	drivers/platform/x86/msi-laptop.c
 
 MULTIFUNCTION DEVICES (MFD)
-P:	Samuel Ortiz
-M:	sameo@linux.intel.com
+M:	Samuel Ortiz <sameo@linux.intel.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-2.6.git
 S:	Supported
 F:	drivers/mfd/
 
 MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM
-P:	Pierre Ossman
-M:	pierre@ossman.eu
-S:	Maintained
+S:	Orphan
 F:	drivers/mmc/
 F:	include/linux/mmc/
 
 MULTIMEDIA CARD (MMC) ETC. OVER SPI
-P:	David Brownell
-M:	dbrownell@users.sourceforge.net
+M:	David Brownell <dbrownell@users.sourceforge.net>
 S:	Odd Fixes
 F:	drivers/mmc/host/mmc_spi.c
 F:	include/linux/spi/mmc_spi.h
 
 MULTISOUND SOUND DRIVER
-P:	Andrew Veliath
-M:	andrewtv@usa.net
+M:	Andrew Veliath <andrewtv@usa.net>
 S:	Maintained
 F:	Documentation/sound/oss/MultiSound
 F:	sound/oss/msnd*
 
 MULTITECH MULTIPORT CARD (ISICOM)
-P:	Jiri Slaby
-M:	jirislaby@gmail.com
+M:	Jiri Slaby <jirislaby@gmail.com>
 S:	Maintained
 F:	drivers/char/isicom.c
 F:	include/linux/isicom.h
 
 MUSB MULTIPOINT HIGH SPEED DUAL-ROLE CONTROLLER
-P:	Felipe Balbi
-M:	felipe.balbi@nokia.com
+M:	Felipe Balbi <felipe.balbi@nokia.com>
 L:	linux-usb@vger.kernel.org
 T:	git git://gitorious.org/musb/mainline.git
 S:	Maintained
 F:	drivers/usb/musb/
 
 MYRICOM MYRI-10G 10GbE DRIVER (MYRI10GE)
-P:	Andrew Gallatin
-M:	gallatin@myri.com
-P:	Brice Goglin
-M:	brice@myri.com
+M:	Andrew Gallatin <gallatin@myri.com>
+M:	Brice Goglin <brice@myri.com>
 L:	netdev@vger.kernel.org
 W:	http://www.myri.com/scs/download-Myri10GE.html
 S:	Supported
 F:	drivers/net/myri10ge/
 
 NATSEMI ETHERNET DRIVER (DP8381x)
-P:	Tim Hockin
-M:	thockin@hockin.org
+M:	Tim Hockin <thockin@hockin.org>
 S:	Maintained
 F:	drivers/net/natsemi.c
 
 NCP FILESYSTEM
-P:	Petr Vandrovec
-M:	vandrove@vc.cvut.cz
+M:	Petr Vandrovec <vandrove@vc.cvut.cz>
 L:	linware@sh.cvut.cz
 S:	Maintained
 F:	fs/ncpfs/
 
 NCR DUAL 700 SCSI DRIVER (MICROCHANNEL)
-P:	James E.J. Bottomley
-M:	James.Bottomley@HansenPartnership.com
+M:	"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/NCR_D700.*
 
 NETEFFECT IWARP RNIC DRIVER (IW_NES)
-P:	Faisal Latif
-M:	faisal.latif@intel.com
-P:	Chien Tung
-M:	chien.tin.tung@intel.com
+M:	Faisal Latif <faisal.latif@intel.com>
+M:	Chien Tung <chien.tin.tung@intel.com>
 L:	general@lists.openfabrics.org
 W:	http://www.neteffect.com
 S:	Supported
 F:	drivers/infiniband/hw/nes/
 
 NETEM NETWORK EMULATOR
-P:	Stephen Hemminger
-M:	shemminger@linux-foundation.org
+M:	Stephen Hemminger <shemminger@linux-foundation.org>
 L:	netem@lists.linux-foundation.org
 S:	Maintained
 F:	net/sched/sch_netem.c
 
 NETERION (S2IO) 10GbE DRIVER (xframe/vxge)
-P:	Ramkrishna Vepa
-M:	ram.vepa@neterion.com
-P:	Rastapur Santosh
-M:	santosh.rastapur@neterion.com
-P:	Sivakumar Subramani
-M:	sivakumar.subramani@neterion.com
-P:	Sreenivasa Honnur
-M:	sreenivasa.honnur@neterion.com
-P:	Anil Murthy
-M:	anil.murthy@neterion.com
+M:	Ramkrishna Vepa <ram.vepa@neterion.com>
+M:	Rastapur Santosh <santosh.rastapur@neterion.com>
+M:	Sivakumar Subramani <sivakumar.subramani@neterion.com>
+M:	Sreenivasa Honnur <sreenivasa.honnur@neterion.com>
+M:	Anil Murthy <anil.murthy@neterion.com>
 L:	netdev@vger.kernel.org
 W:	http://trac.neterion.com/cgi-bin/trac.cgi/wiki/Linux?Anonymous
 W:	http://trac.neterion.com/cgi-bin/trac.cgi/wiki/X3100Linux?Anonymous
@@ -4089,8 +3507,7 @@ P:	Marc Boucher
 P:	James Morris
 P:	Harald Welte
 P:	Jozsef Kadlecsik
-P:	Patrick McHardy
-M:	kaber@trash.net
+M:	Patrick McHardy <kaber@trash.net>
 L:	netfilter-devel@vger.kernel.org
 L:	netfilter@vger.kernel.org
 L:	coreteam@netfilter.org
@@ -4106,8 +3523,7 @@ F:	net/*/netfilter/
 F:	net/netfilter/
 
 NETLABEL
-P:	Paul Moore
-M:	paul.moore@hp.com
+M:	Paul Moore <paul.moore@hp.com>
 W:	http://netlabel.sf.net
 L:	netdev@vger.kernel.org
 S:	Supported
@@ -4116,8 +3532,7 @@ F:	include/net/netlabel.h
 F:	net/netlabel/
 
 NETROM NETWORK LAYER
-P:	Ralf Baechle
-M:	ralf@linux-mips.org
+M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-hams@vger.kernel.org
 W:	http://www.linux-ax25.org/
 S:	Maintained
@@ -4126,16 +3541,14 @@ F:	include/net/netrom.h
 F:	net/netrom/
 
 NETWORK BLOCK DEVICE (NBD)
-P:	Paul Clements
-M:	Paul.Clements@steeleye.com
+M:	Paul Clements <Paul.Clements@steeleye.com>
 S:	Maintained
 F:	Documentation/blockdev/nbd.txt
 F:	drivers/block/nbd.c
 F:	include/linux/nbd.h
 
 NETWORKING [GENERAL]
-P:	David S. Miller
-M:	davem@davemloft.net
+M:	"David S. Miller" <davem@davemloft.net>
 L:	netdev@vger.kernel.org
 W:	http://www.linuxfoundation.org/en/Net
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
@@ -4144,18 +3557,12 @@ F:	net/
 F:	include/net/
 
 NETWORKING [IPv4/IPv6]
-P:	David S. Miller
-M:	davem@davemloft.net
-P:	Alexey Kuznetsov
-M:	kuznet@ms2.inr.ac.ru
-P:	Pekka Savola (ipv6)
-M:	pekkas@netcore.fi
-P:	James Morris
-M:	jmorris@namei.org
-P:	Hideaki YOSHIFUJI
-M:	yoshfuji@linux-ipv6.org
-P:	Patrick McHardy
-M:	kaber@trash.net
+M:	"David S. Miller" <davem@davemloft.net>
+M:	Alexey Kuznetsov <kuznet@ms2.inr.ac.ru>
+M:	"Pekka Savola (ipv6)" <pekkas@netcore.fi>
+M:	James Morris <jmorris@namei.org>
+M:	Hideaki YOSHIFUJI <yoshfuji@linux-ipv6.org>
+M:	Patrick McHardy <kaber@trash.net>
 L:	netdev@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6.git
 S:	Maintained
@@ -4164,14 +3571,12 @@ F:	net/ipv6/
 F:	include/net/ip*
 
 NETWORKING [LABELED] (NetLabel, CIPSO, Labeled IPsec, SECMARK)
-P:	Paul Moore
-M:	paul.moore@hp.com
+M:	Paul Moore <paul.moore@hp.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 
 NETWORKING [WIRELESS]
-P:	John W. Linville
-M:	linville@tuxdriver.com
+M:	"John W. Linville" <linville@tuxdriver.com>
 L:	linux-wireless@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-2.6.git
 S:	Maintained
@@ -4187,16 +3592,14 @@ S:	Odd Fixes
 F:	drivers/net/
 
 NETXEN (1/10) GbE SUPPORT
-P:	Dhananjay Phadke
-M:	dhananjay@netxen.com
+M:	Dhananjay Phadke <dhananjay@netxen.com>
 L:	netdev@vger.kernel.org
 W:	http://www.netxen.com
 S:	Supported
 F:	drivers/net/netxen/
 
 NFS, SUNRPC, AND LOCKD CLIENTS
-P:	Trond Myklebust
-M:	Trond.Myklebust@netapp.com
+M:	Trond Myklebust <Trond.Myklebust@netapp.com>
 L:	linux-nfs@vger.kernel.org
 W:	http://client.linux-nfs.org
 T:	git git://git.linux-nfs.org/pub/linux/nfs-2.6.git
@@ -4210,17 +3613,14 @@ F:	include/linux/nfs*
 F:	include/linux/sunrpc/
 
 NI5010 NETWORK DRIVER
-P:	Jan-Pascal van Best
-M:	janpascal@vanbest.org
-P:	Andreas Mohr
-M:	andi@lisas.de
+M:	Jan-Pascal van Best <janpascal@vanbest.org>
+M:	Andreas Mohr <andi@lisas.de>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ni5010.*
 
 NILFS2 FILESYSTEM
-P:	KONISHI Ryusuke
-M:	konishi.ryusuke@lab.ntt.co.jp
+M:	KONISHI Ryusuke <konishi.ryusuke@lab.ntt.co.jp>
 L:	users@nilfs.org
 W:	http://www.nilfs.org/en/
 S:	Supported
@@ -4229,26 +3629,22 @@ F:	fs/nilfs2/
 F:	include/linux/nilfs2_fs.h
 
 NINJA SCSI-3 / NINJA SCSI-32Bi (16bit/CardBus) PCMCIA SCSI HOST ADAPTER DRIVER
-P:	YOKOTA Hiroshi
-M:	yokota@netlab.is.tsukuba.ac.jp
+M:	YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
 W:	http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/
 S:	Maintained
 F:	Documentation/scsi/NinjaSCSI.txt
 F:	drivers/scsi/pcmcia/nsp_*
 
 NINJA SCSI-32Bi/UDE PCI/CARDBUS SCSI HOST ADAPTER DRIVER
-P:	GOTO Masanori
-M:	gotom@debian.or.jp
-P:	YOKOTA Hiroshi
-M:	yokota@netlab.is.tsukuba.ac.jp
+M:	GOTO Masanori <gotom@debian.or.jp>
+M:	YOKOTA Hiroshi <yokota@netlab.is.tsukuba.ac.jp>
 W:	http://www.netlab.is.tsukuba.ac.jp/~yokota/izumi/ninja/
 S:	Maintained
 F:	Documentation/scsi/NinjaSCSI.txt
 F:	drivers/scsi/nsp32*
 
 NTFS FILESYSTEM
-P:	Anton Altaparmakov
-M:	aia21@cantab.net
+M:	Anton Altaparmakov <aia21@cantab.net>
 L:	linux-ntfs-dev@lists.sourceforge.net
 W:	http://www.linux-ntfs.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/aia21/ntfs-2.6.git
@@ -4257,16 +3653,14 @@ F:	Documentation/filesystems/ntfs.txt
 F:	fs/ntfs/
 
 NVIDIA (rivafb and nvidiafb) FRAMEBUFFER DRIVER
-P:	Antonino Daplas
-M:	adaplas@gmail.com
+M:	Antonino Daplas <adaplas@gmail.com>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/video/riva/
 F:	drivers/video/nvidia/
 
 OMAP SUPPORT
-P:	Tony Lindgren <tony@atomide.com>
-M:	tony@atomide.com
+M:	"Tony Lindgren <tony@atomide.com>" <tony@atomide.com>
 L:	linux-omap@vger.kernel.org
 W:	http://www.muru.com/linux/omap/
 W:	http://linux.omap.com/
@@ -4275,98 +3669,83 @@ S:	Maintained
 F:	arch/arm/*omap*
 
 OMAP CLOCK FRAMEWORK SUPPORT
-P:	Paul Walmsley
-M:	paul@pwsan.com
+M:	Paul Walmsley <paul@pwsan.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	arch/arm/*omap*/*clock*
 
 OMAP POWER MANAGEMENT SUPPORT
-P:	Kevin Hilman
-M:	khilman@deeprootsystems.com
+M:	Kevin Hilman <khilman@deeprootsystems.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	arch/arm/*omap*/*pm*
 
 OMAP AUDIO SUPPORT
-P:	Jarkko Nikula
-M:	jhnikula@gmail.com
+M:	Jarkko Nikula <jhnikula@gmail.com>
 L:	alsa-devel@alsa-project.org (subscribers-only)
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	sound/soc/omap/
 
 OMAP FRAMEBUFFER SUPPORT
-P:	Imre Deak
-M:	imre.deak@nokia.com
+M:	Imre Deak <imre.deak@nokia.com>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	drivers/video/omap/
 
 OMAP MMC SUPPORT
-P:	Jarkko Lavinen
-M:	jarkko.lavinen@nokia.com
-L:	linux-kernel@vger.kernel.org
+M:	Jarkko Lavinen <jarkko.lavinen@nokia.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 F:	drivers/mmc/host/*omap*
 
 OMAP RANDOM NUMBER GENERATOR SUPPORT
-P:	Deepak Saxena
-M:	dsaxena@plexity.net
+M:	Deepak Saxena <dsaxena@plexity.net>
 S:	Maintained
 F:	drivers/char/hw_random/omap-rng.c
 
 OMAP USB SUPPORT
-P:	Felipe Balbi
-M:	felipe.balbi@nokia.com
-P:	David Brownell
-M:	dbrownell@users.sourceforge.net
+M:	Felipe Balbi <felipe.balbi@nokia.com>
+M:	David Brownell <dbrownell@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
 L:	linux-omap@vger.kernel.org
 S:	Maintained
 
 OMFS FILESYSTEM
-P:	Bob Copeland
-M:	me@bobcopeland.com
+M:	Bob Copeland <me@bobcopeland.com>
 L:	linux-karma-devel@lists.sourceforge.net
 S:	Maintained
 F:	Documentation/filesystems/omfs.txt
 F:	fs/omfs/
 
 OMNIKEY CARDMAN 4000 DRIVER
-P:	Harald Welte
-M:	laforge@gnumonks.org
+M:	Harald Welte <laforge@gnumonks.org>
 S:	Maintained
 F:	drivers/char/pcmcia/cm4000_cs.c
 F:	include/linux/cm4000_cs.h
 
 OMNIKEY CARDMAN 4040 DRIVER
-P:	Harald Welte
-M:	laforge@gnumonks.org
+M:	Harald Welte <laforge@gnumonks.org>
 S:	Maintained
 F:	drivers/char/pcmcia/cm4040_cs.*
 
 OMNIVISION OV7670 SENSOR DRIVER
-P:	Jonathan Corbet
-M:	corbet@lwn.net
+M:	Jonathan Corbet <corbet@lwn.net>
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
 F:	drivers/media/video/ov7670.c
 
 ONENAND FLASH DRIVER
-P:	Kyungmin Park
-M:	kyungmin.park@samsung.com
+M:	Kyungmin Park <kyungmin.park@samsung.com>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
 F:	drivers/mtd/onenand/
 F:	include/linux/mtd/onenand*.h
 
 ONSTREAM SCSI TAPE DRIVER
-P:	Willem Riede
-M:	osst@riede.org
+M:	Willem Riede <osst@riede.org>
 L:	osst-users@lists.sourceforge.net
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
@@ -4374,16 +3753,14 @@ F:	drivers/scsi/osst*
 F:	drivers/scsi/st*
 
 OPENCORES I2C BUS DRIVER
-P:	Peter Korsgaard
-M:	jacmet@sunsite.dk
+M:	Peter Korsgaard <jacmet@sunsite.dk>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	Documentation/i2c/busses/i2c-ocores
 F:	drivers/i2c/busses/i2c-ocores.c
 
 OPROFILE
-P:	Robert Richter
-M:	robert.richter@amd.com
+M:	Robert Richter <robert.richter@amd.com>
 L:	oprofile-list@lists.sf.net
 S:	Maintained
 F:	arch/*/oprofile/
@@ -4391,10 +3768,8 @@ F:	drivers/oprofile/
 F:	include/linux/oprofile.h
 
 ORACLE CLUSTER FILESYSTEM 2 (OCFS2)
-P:	Mark Fasheh
-M:	mfasheh@suse.com
-P:	Joel Becker
-M:	joel.becker@oracle.com
+M:	Mark Fasheh <mfasheh@suse.com>
+M:	Joel Becker <joel.becker@oracle.com>
 L:	ocfs2-devel@oss.oracle.com (moderated for non-subscribers)
 W:	http://oss.oracle.com/projects/ocfs2/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git
@@ -4404,10 +3779,8 @@ F:	Documentation/filesystems/dlmfs.txt
 F:	fs/ocfs2/
 
 ORINOCO DRIVER
-P:	Pavel Roskin
-M:	proski@gnu.org
-P:	David Gibson
-M:	hermes@gibson.dropbear.id.au
+M:	Pavel Roskin <proski@gnu.org>
+M:	David Gibson <hermes@gibson.dropbear.id.au>
 L:	linux-wireless@vger.kernel.org
 L:	orinoco-users@lists.sourceforge.net
 L:	orinoco-devel@lists.sourceforge.net
@@ -4416,10 +3789,8 @@ S:	Maintained
 F:	drivers/net/wireless/orinoco/
 
 OSD LIBRARY and FILESYSTEM
-P:	Boaz Harrosh
-M:	bharrosh@panasas.com
-P:	Benny Halevy
-M:	bhalevy@panasas.com
+M:	Boaz Harrosh <bharrosh@panasas.com>
+M:	Benny Halevy <bhalevy@panasas.com>
 L:	osd-dev@open-osd.org
 W:	http://open-osd.org
 T:	git git://git.open-osd.org/open-osd.git
@@ -4429,8 +3800,7 @@ F:	drivers/include/scsi/osd_*
 F:	fs/exofs/
 
 P54 WIRELESS DRIVER
-P:	Michael Wu
-M:	flamingice@sourmilk.net
+M:	Michael Wu <flamingice@sourmilk.net>
 L:	linux-wireless@vger.kernel.org
 W:	http://prism54.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mwu/mac80211-drivers.git
@@ -4438,30 +3808,25 @@ S:	Maintained
 F:	drivers/net/wireless/p54/
 
 PA SEMI ETHERNET DRIVER
-P:	Olof Johansson
-M:	olof@lixom.net
+M:	Olof Johansson <olof@lixom.net>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/pasemi_mac.*
 
 PA SEMI SMBUS DRIVER
-P:	Olof Johansson
-M:	olof@lixom.net
+M:	Olof Johansson <olof@lixom.net>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-pasemi.c
 
 PANASONIC LAPTOP ACPI EXTRAS DRIVER
-P:	Harald Welte
-M:	laforge@gnumonks.org
+M:	Harald Welte <laforge@gnumonks.org>
 S:	Maintained
 F:	drivers/platform/x86/panasonic-laptop.c
 
 PANASONIC MN10300/AM33 PORT
-P:	David Howells
-M:	dhowells@redhat.com
-P:	Koichi Yasutake
-M:	yasutake.koichi@jp.panasonic.com
+M:	David Howells <dhowells@redhat.com>
+M:	Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
 L:	linux-am33-list@redhat.com (moderated for non-subscribers)
 W:	ftp://ftp.redhat.com/pub/redhat/gnupro/AM33/
 S:	Maintained
@@ -4477,14 +3842,10 @@ F:	drivers/char/ppdev.c
 F:	include/linux/ppdev.h
 
 PARAVIRT_OPS INTERFACE
-P:	Jeremy Fitzhardinge
-M:	jeremy@xensource.com
-P:	Chris Wright
-M:	chrisw@sous-sol.org
-P:	Alok Kataria
-M:	akataria@vmware.com
-P:	Rusty Russell
-M:	rusty@rustcorp.com.au
+M:	Jeremy Fitzhardinge <jeremy@xensource.com>
+M:	Chris Wright <chrisw@sous-sol.org>
+M:	Alok Kataria <akataria@vmware.com>
+M:	Rusty Russell <rusty@rustcorp.com.au>
 L:	virtualization@lists.osdl.org
 S:	Supported
 F:	Documentation/ia64/paravirt_ops.txt
@@ -4492,8 +3853,7 @@ F:	arch/*/kernel/paravirt*
 F:	arch/*/include/asm/paravirt.h
 
 PARIDE DRIVERS FOR PARALLEL PORT IDE DEVICES
-P:	Tim Waugh
-M:	tim@cyberelk.net
+M:	Tim Waugh <tim@cyberelk.net>
 L:	linux-parport@lists.infradead.org (subscribers-only)
 W:	http://www.torque.net/linux-pp.html
 S:	Maintained
@@ -4501,10 +3861,8 @@ F:	Documentation/blockdev/paride.txt
 F:	drivers/block/paride/
 
 PARISC ARCHITECTURE
-P:	Kyle McMartin
-M:	kyle@mcmartin.ca
-P:	Helge Deller
-M:	deller@gmx.de
+M:	Kyle McMartin <kyle@mcmartin.ca>
+M:	Helge Deller <deller@gmx.de>
 L:	linux-parisc@vger.kernel.org
 W:	http://www.parisc-linux.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/kyle/parisc-2.6.git
@@ -4513,37 +3871,32 @@ F:	arch/parisc/
 F:	drivers/parisc/
 
 PC87360 HARDWARE MONITORING DRIVER
-P:	Jim Cromie
-M:	jim.cromie@gmail.com
+M:	Jim Cromie <jim.cromie@gmail.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/pc87360
 F:	drivers/hwmon/pc87360.c
 
 PC8736x GPIO DRIVER
-P:	Jim Cromie
-M:	jim.cromie@gmail.com
+M:	Jim Cromie <jim.cromie@gmail.com>
 S:	Maintained
 F:	drivers/char/pc8736x_gpio.c
 
 PCA9532 LED DRIVER
-P:	Riku Voipio
-M:	riku.voipio@iki.fi
+M:	Riku Voipio <riku.voipio@iki.fi>
 S:	Maintained
 F:	drivers/leds/leds-pca9532.c
 F:	include/linux/leds-pca9532.h
 
 PCI ERROR RECOVERY
-P:	Linas Vepstas
-M:	linas@austin.ibm.com
+M:	Linas Vepstas <linas@austin.ibm.com>
 L:	linux-pci@vger.kernel.org
 S:	Supported
 F:	Documentation/PCI/pci-error-recovery.txt
 F:	Documentation/powerpc/eeh-pci-error-recovery.txt
 
 PCI SUBSYSTEM
-P:	Jesse Barnes
-M:	jbarnes@virtuousgeek.org
+M:	Jesse Barnes <jbarnes@virtuousgeek.org>
 L:	linux-pci@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6.git
 S:	Supported
@@ -4552,8 +3905,7 @@ F:	drivers/pci/
 F:	include/linux/pci*
 
 PCIE HOTPLUG DRIVER
-P:	Kristen Carlson Accardi
-M:	kristen.c.accardi@intel.com
+M:	Kristen Carlson Accardi <kristen.c.accardi@intel.com>
 L:	linux-pci@vger.kernel.org
 S:	Supported
 F:	drivers/pci/pcie/
@@ -4569,121 +3921,103 @@ F:	drivers/pcmcia/
 F:	include/pcmcia/
 
 PCNET32 NETWORK DRIVER
-P:	Don Fry
-M:	pcnet32@verizon.net
+M:	Don Fry <pcnet32@verizon.net>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/pcnet32.c
 
 PER-TASK DELAY ACCOUNTING
-P:	Balbir Singh
-M:	balbir@linux.vnet.ibm.com
+M:	Balbir Singh <balbir@linux.vnet.ibm.com>
 S:	Maintained
 F:	include/linux/delayacct.h
 F:	kernel/delayacct.c
 
 PERFORMANCE COUNTER SUBSYSTEM
-P:	Peter Zijlstra
-M:	a.p.zijlstra@chello.nl
-P:	Paul Mackerras
-M:	paulus@samba.org
-P:	Ingo Molnar
-M:	mingo@elte.hu
-L:	linux-kernel@vger.kernel.org
+M:	Peter Zijlstra <a.p.zijlstra@chello.nl>
+M:	Paul Mackerras <paulus@samba.org>
+M:	Ingo Molnar <mingo@elte.hu>
 S:	Supported
 
 PERSONALITY HANDLING
-P:	Christoph Hellwig
-M:	hch@infradead.org
+M:	Christoph Hellwig <hch@infradead.org>
 L:	linux-abi-devel@lists.sourceforge.net
 S:	Maintained
 F:	include/linux/personality.h
 
 PHRAM MTD DRIVER
-P:	Joern Engel
-M:	joern@lazybastard.org
+M:	Joern Engel <joern@lazybastard.org>
 L:	linux-mtd@lists.infradead.org
 S:	Maintained
 F:	drivers/mtd/devices/phram.c
 
 PKTCDVD DRIVER
-P:	Peter Osterlund
-M:	petero2@telia.com
+M:	Peter Osterlund <petero2@telia.com>
 S:	Maintained
 F:	drivers/block/pktcdvd.c
 F:	include/linux/pktcdvd.h
 
 POSIX CLOCKS and TIMERS
-P:	Thomas Gleixner
-M:	tglx@linutronix.de
+M:	Thomas Gleixner <tglx@linutronix.de>
 S:	Supported
 F:	fs/timerfd.c
 F:	include/linux/timer*
 F:	kernel/*timer*
 
 POWER SUPPLY CLASS/SUBSYSTEM and DRIVERS
-P:	Anton Vorontsov
-M:	cbou@mail.ru
-P:	David Woodhouse
-M:	dwmw2@infradead.org
+M:	Anton Vorontsov <cbou@mail.ru>
+M:	David Woodhouse <dwmw2@infradead.org>
 T:	git git://git.infradead.org/battery-2.6.git
 S:	Maintained
 F:	include/linux/power_supply.h
 F:	drivers/power/power_supply*
 
 PNP SUPPORT
-P:	Adam Belay
-M:	abelay@mit.edu
-P:	Bjorn Helgaas
-M:	bjorn.helgaas@hp.com
+M:	Adam Belay <abelay@mit.edu>
+M:	Bjorn Helgaas <bjorn.helgaas@hp.com>
 S:	Maintained
 F:	drivers/pnp/
 
 PNXxxxx I2C DRIVER
-P:	Vitaly Wool
-M:	vitalywool@gmail.com
+M:	Vitaly Wool <vitalywool@gmail.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	drivers/i2c/busses/i2c-pnx.c
 
 PPP PROTOCOL DRIVERS AND COMPRESSORS
-P:	Paul Mackerras
-M:	paulus@samba.org
+M:	Paul Mackerras <paulus@samba.org>
 L:	linux-ppp@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ppp_*
 
 PPP OVER ATM (RFC 2364)
-P:	Mitchell Blank Jr
-M:	mitch@sfgoth.com
+M:	Mitchell Blank Jr <mitch@sfgoth.com>
 S:	Maintained
 F:	net/atm/pppoatm.c
 F:	include/linux/atmppp.h
 
 PPP OVER ETHERNET
-P:	Michal Ostrowski
-M:	mostrows@earthlink.net
+M:	Michal Ostrowski <mostrows@earthlink.net>
 S:	Maintained
 F:	drivers/net/pppoe.c
 F:	drivers/net/pppox.c
 
 PPP OVER L2TP
-P:	James Chapman
-M:	jchapman@katalix.com
+M:	James Chapman <jchapman@katalix.com>
 S:	Maintained
 F:	drivers/net/pppol2tp.c
 F:	include/linux/if_pppol2tp.h
 
 PPS SUPPORT
-P:	Rodolfo Giometti
-M:	giometti@enneenne.com
+M:	Rodolfo Giometti <giometti@enneenne.com>
 W:	http://wiki.enneenne.com/index.php/LinuxPPS_support
 L:	linuxpps@ml.enneenne.com (subscribers-only)
 S:	Maintained
+F:	Documentation/pps/
+F:	drivers/pps/
+F:	include/linux/pps*.h
 
 PREEMPTIBLE KERNEL
-P:	Robert Love
-M:	rml@tech9.net
+M:	Robert Love <rml@tech9.net>
 L:	kpreempt-tech@lists.sourceforge.net
 W:	ftp://ftp.kernel.org/pub/linux/kernel/people/rml/preempt-kernel
 S:	Supported
@@ -4691,37 +4025,32 @@ F:	Documentation/preempt-locking.txt
 F:	include/linux/preempt.h
 
 PRISM54 WIRELESS DRIVER
-P:	Luis R. Rodriguez
-M:	mcgrof@gmail.com
+M:	"Luis R. Rodriguez" <mcgrof@gmail.com>
 L:	linux-wireless@vger.kernel.org
 W:	http://prism54.org
 S:	Maintained
 F:	drivers/net/wireless/prism54/
 
 PROMISE DC4030 CACHING DISK CONTROLLER DRIVER
-P:	Peter Denison
-M:	promise@pnd-pc.demon.co.uk
+M:	Peter Denison <promise@pnd-pc.demon.co.uk>
 W:	http://www.pnd-pc.demon.co.uk/promise/
 S:	Maintained
 
 PROMISE SATA TX2/TX4 CONTROLLER LIBATA DRIVER
-P:	Mikael Pettersson
-M:	mikpe@it.uu.se
+M:	Mikael Pettersson <mikpe@it.uu.se>
 L:	linux-ide@vger.kernel.org
 S:	Maintained
 F:	drivers/ata/sata_promise.*
 
 PS3 NETWORK SUPPORT
-P:	Geoff Levand
-M:	geoffrey.levand@am.sony.com
+M:	Geoff Levand <geoffrey.levand@am.sony.com>
 L:	netdev@vger.kernel.org
 L:	cbe-oss-dev@ozlabs.org
 S:	Supported
 F:	drivers/net/ps3_gelic_net.*
 
 PS3 PLATFORM SUPPORT
-P:	Geoff Levand
-M:	geoffrey.levand@am.sony.com
+M:	Geoff Levand <geoffrey.levand@am.sony.com>
 L:	linuxppc-dev@ozlabs.org
 L:	cbe-oss-dev@ozlabs.org
 S:	Supported
@@ -4736,16 +4065,13 @@ F:	drivers/usb/host/*ps3.c
 F:	sound/ppc/snd_ps3*
 
 PS3VRAM DRIVER
-P:	Jim Paris
-M:	jim@jtan.com
+M:	Jim Paris <jim@jtan.com>
 L:	cbe-oss-dev@ozlabs.org
 S:	Maintained
 
 PTRACE SUPPORT
-P:	Roland McGrath
-M:	roland@redhat.com
-P:	Oleg Nesterov
-M:	oleg@redhat.com
+M:	Roland McGrath <roland@redhat.com>
+M:	Oleg Nesterov <oleg@redhat.com>
 S:	Maintained
 F:	include/asm-generic/syscall.h
 F:	include/linux/ptrace.h
@@ -4754,8 +4080,7 @@ F:	include/linux/tracehook.h
 F:	kernel/ptrace.c
 
 PVRUSB2 VIDEO4LINUX DRIVER
-P:	Mike Isely
-M:	isely@pobox.com
+M:	Mike Isely <isely@pobox.com>
 L:	pvrusb2@isely.net	(subscribers-only)
 L:	linux-media@vger.kernel.org
 W:	http://www.isely.net/pvrusb2/
@@ -4765,10 +4090,8 @@ F:	Documentation/video4linux/README.pvrusb2
 F:	drivers/media/video/pvrusb2/
 
 PXA2xx/PXA3xx SUPPORT
-P:	Eric Miao
-M:	eric.y.miao@gmail.com
-P:	Russell King
-M:	linux@arm.linux.org.uk
+M:	Eric Miao <eric.y.miao@gmail.com>
+M:	Russell King <linux@arm.linux.org.uk>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 S:	Maintained
 F:	arch/arm/mach-pxa/
@@ -4780,17 +4103,14 @@ F:	sound/arm/pxa*
 F:	sound/soc/pxa
 
 PXA168 SUPPORT
-P:	Eric Miao
-M:	eric.y.miao@gmail.com
-P:	Jason Chagas
-M:	jason.chagas@marvell.com
+M:	Eric Miao <eric.y.miao@gmail.com>
+M:	Jason Chagas <jason.chagas@marvell.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
 S:	Maintained
 
 PXA910 SUPPORT
-P:	Eric Miao
-M:	eric.y.miao@gmail.com
+M:	Eric Miao <eric.y.miao@gmail.com>
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ycmiao/pxa-linux-2.6.git
 S:	Maintained
@@ -4799,13 +4119,12 @@ PXA MMCI DRIVER
 S:	Orphan
 
 PXA RTC DRIVER
-P:	Robert Jarzmik
-M:	robert.jarzmik@free.fr
+M:	Robert Jarzmik <robert.jarzmik@free.fr>
 L:	rtc-linux@googlegroups.com
 S:	Maintained
 
 QLOGIC QLA2XXX FC-SCSI DRIVER
-P:	Andrew Vasquez
+M:	Andrew Vasquez <andrew.vasquez@qlogic.com>
 M:	linux-driver@qlogic.com
 L:	linux-scsi@vger.kernel.org
 S:	Supported
@@ -4813,7 +4132,7 @@ F:	Documentation/scsi/LICENSE.qla2xxx
 F:	drivers/scsi/qla2xxx/
 
 QLOGIC QLA3XXX NETWORK DRIVER
-P:	Ron Mercer
+M:	Ron Mercer <ron.mercer@qlogic.com>
 M:	linux-driver@qlogic.com
 L:	netdev@vger.kernel.org
 S:	Supported
@@ -4821,16 +4140,14 @@ F:	Documentation/networking/LICENSE.qla3xxx
 F:	drivers/net/qla3xxx.*
 
 QLOGIC QLGE 10Gb ETHERNET DRIVER
-P:	Ron Mercer
+M:	Ron Mercer <ron.mercer@qlogic.com>
 M:	linux-driver@qlogic.com
-M:	ron.mercer@qlogic.com
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/qlge/
 
 QNX4 FILESYSTEM
-P:	Anders Larsen
-M:	al@alarsen.net
+M:	Anders Larsen <al@alarsen.net>
 W:	http://www.alarsen.net/linux/qnx4fs/
 S:	Maintained
 F:	fs/qnx4/
@@ -4838,16 +4155,14 @@ F:	include/linux/qnx4_fs.h
 F:	include/linux/qnxtypes.h
 
 RADEON FRAMEBUFFER DISPLAY DRIVER
-P:	Benjamin Herrenschmidt
-M:	benh@kernel.crashing.org
+M:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/video/aty/radeon*
 F:	include/linux/radeonfb.h
 
 RAGE128 FRAMEBUFFER DISPLAY DRIVER
-P:	Paul Mackerras
-M:	paulus@samba.org
+M:	Paul Mackerras <paulus@samba.org>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/video/aty/aty128fb.c
@@ -4862,64 +4177,53 @@ T:	git git://git.kernel.org/pub/scm/linux/kernel/git/ivd/rt2x00.git
 F:	drivers/net/wireless/rt2x00/
 
 RAMDISK RAM BLOCK DEVICE DRIVER
-P:	Nick Piggin
-M:	npiggin@suse.de
+M:	Nick Piggin <npiggin@suse.de>
 S:	Maintained
 F:	Documentation/blockdev/ramdisk.txt
 F:	drivers/block/brd.c
 
 RANDOM NUMBER DRIVER
-P:	Matt Mackall
-M:	mpm@selenic.com
+M:	Matt Mackall <mpm@selenic.com>
 S:	Maintained
 F:	drivers/char/random.c
 
 RAPIDIO SUBSYSTEM
-P:	Matt Porter
-M:	mporter@kernel.crashing.org
+M:	Matt Porter <mporter@kernel.crashing.org>
 S:	Maintained
 F:	drivers/rapidio/
 
 RAYLINK/WEBGEAR 802.11 WIRELESS LAN DRIVER
-P:	Corey Thomas
-M:	coreythomas@charter.net
+M:	Corey Thomas <coreythomas@charter.net>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F:	drivers/net/wireless/ray*
 
 RCUTORTURE MODULE
-P:	Josh Triplett
-M:	josh@freedesktop.org
-P:	Paul E. McKenney
-M:	paulmck@linux.vnet.ibm.com
+M:	Josh Triplett <josh@freedesktop.org>
+M:	"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
 S:	Maintained
 F:	Documentation/RCU/torture.txt
 F:	kernel/rcutorture.c
 
 RDC R-321X SoC
-P:	Florian Fainelli
-M:	florian@openwrt.org
+M:	Florian Fainelli <florian@openwrt.org>
 S:	Maintained
 
 RDC R6040 FAST ETHERNET DRIVER
-P:	Florian Fainelli
-M:	florian@openwrt.org
+M:	Florian Fainelli <florian@openwrt.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/r6040.c
 
 RDS - RELIABLE DATAGRAM SOCKETS
-P:	Andy Grover
-M:	andy.grover@oracle.com
+M:	Andy Grover <andy.grover@oracle.com>
 L:	rds-devel@oss.oracle.com (moderated for non-subscribers)
 S:	Supported
 F:	net/rds/
 
 READ-COPY UPDATE (RCU)
-P:	Dipankar Sarma
-M:	dipankar@in.ibm.com
-P:	Paul E. McKenney
-M:	paulmck@linux.vnet.ibm.com
+M:	Dipankar Sarma <dipankar@in.ibm.com>
+M:	"Paul E. McKenney" <paulmck@linux.vnet.ibm.com>
 W:	http://www.rdrop.com/users/paulmck/rclock/
 S:	Supported
 F:	Documentation/RCU/rcu.txt
@@ -4929,16 +4233,14 @@ F:	include/linux/srcu.h
 F:	kernel/rcupdate.c
 
 REAL TIME CLOCK DRIVER
-P:	Paul Gortmaker
-M:	p_gortmaker@yahoo.com
+M:	Paul Gortmaker <p_gortmaker@yahoo.com>
 S:	Maintained
 F:	Documentation/rtc.txt
 F:	drivers/rtc/
 F:	include/linux/rtc.h
 
 REAL TIME CLOCK (RTC) SUBSYSTEM
-P:	Alessandro Zummo
-M:	a.zummo@towertech.it
+M:	Alessandro Zummo <a.zummo@towertech.it>
 L:	rtc-linux@googlegroups.com
 S:	Maintained
 F:	Documentation/rtc.txt
@@ -4951,8 +4253,7 @@ S:	Supported
 F:	fs/reiserfs/
 
 RFKILL
-P:	Johannes Berg
-M:	johannes@sipsolutions.net
+M:	Johannes Berg <johannes@sipsolutions.net>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F	Documentation/rfkill.txt
@@ -4971,8 +4272,7 @@ F:	Documentation/serial/rocket.txt
 F:	drivers/char/rocket*
 
 ROSE NETWORK LAYER
-P:	Ralf Baechle
-M:	ralf@linux-mips.org
+M:	Ralf Baechle <ralf@linux-mips.org>
 L:	linux-hams@vger.kernel.org
 W:	http://www.linux-ax25.org/
 S:	Maintained
@@ -4981,8 +4281,7 @@ F:	include/net/rose.h
 F:	net/rose/
 
 RTL8180 WIRELESS DRIVER
-P:	John W. Linville
-M:	linville@tuxdriver.com
+M:	"John W. Linville" <linville@tuxdriver.com>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
@@ -4990,12 +4289,9 @@ S:	Maintained
 F:	drivers/net/wireless/rtl818*
 
 RTL8187 WIRELESS DRIVER
-P:	Herton Ronaldo Krzesinski
-M:	herton@mandriva.com.br
-P:	Hin-Tak Leung
-M:	htl10@users.sourceforge.net
-P:	Larry Finger
-M:	Larry.Finger@lwfinger.net
+M:	Herton Ronaldo Krzesinski <herton@mandriva.com.br>
+M:	Hin-Tak Leung <htl10@users.sourceforge.net>
+M:	Larry Finger <Larry.Finger@lwfinger.net>
 L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
@@ -5003,17 +4299,14 @@ S:	Maintained
 F:	drivers/net/wireless/rtl818x/rtl8187*
 
 S3 SAVAGE FRAMEBUFFER DRIVER
-P:	Antonino Daplas
-M:	adaplas@gmail.com
+M:	Antonino Daplas <adaplas@gmail.com>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/video/savage/
 
 S390
-P:	Martin Schwidefsky
-M:	schwidefsky@de.ibm.com
-P:	Heiko Carstens
-M:	heiko.carstens@de.ibm.com
+M:	Martin Schwidefsky <schwidefsky@de.ibm.com>
+M:	Heiko Carstens <heiko.carstens@de.ibm.com>
 M:	linux390@de.ibm.com
 L:	linux-s390@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -5021,10 +4314,8 @@ S:	Supported
 F:	arch/s390/
 
 S390 NETWORK DRIVERS
-P:	Ursula Braun
-M:	ursula.braun@de.ibm.com
-P:	Frank Blaschka
-M:	blaschka@linux.vnet.ibm.com
+M:	Ursula Braun <ursula.braun@de.ibm.com>
+M:	Frank Blaschka <blaschka@linux.vnet.ibm.com>
 M:	linux390@de.ibm.com
 L:	linux-s390@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -5032,20 +4323,16 @@ S:	Supported
 F:	drivers/s390/net/
 
 S390 ZCRYPT DRIVER
-P:	Felix Beck
-M:	felix.beck@de.ibm.com
-P:	Ralph Wuerthner
-M:	ralph.wuerthner@de.ibm.com
+M:	Felix Beck <felix.beck@de.ibm.com>
+M:	Ralph Wuerthner <ralph.wuerthner@de.ibm.com>
 M:	linux390@de.ibm.com
 L:	linux-s390@vger.kernel.org
 S:	Supported
 F:	drivers/s390/crypto/
 
 S390 ZFCP DRIVER
-P:	Christof Schmitt
-M:	christof.schmitt@de.ibm.com
-P:	Martin Peschke
-M:	mp3@de.ibm.com
+M:	Christof Schmitt <christof.schmitt@de.ibm.com>
+M:	Martin Peschke <mp3@de.ibm.com>
 M:	linux390@de.ibm.com
 L:	linux-s390@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -5054,8 +4341,7 @@ F:	Documentation/s390/zfcpdump.txt
 F:	drivers/s390/scsi/zfcp_*
 
 S390 IUCV NETWORK LAYER
-P:	Ursula Braun
-M:	ursula.braun@de.ibm.com
+M:	Ursula Braun <ursula.braun@de.ibm.com>
 M:	linux390@de.ibm.com
 L:	linux-s390@vger.kernel.org
 W:	http://www.ibm.com/developerworks/linux/linux390/
@@ -5065,15 +4351,13 @@ F:	include/net/iucv/
 F:	net/iucv/
 
 S3C24XX SD/MMC Driver
-P:	Ben Dooks
-M:	ben-linux@fluff.org
+M:	Ben Dooks <ben-linux@fluff.org>
 L:	linux-arm-kernel@lists.arm.linux.org.uk (subscribers-only)
 S:	Supported
 F:	drivers/mmc/host/s3cmci.*
 
 SAA7146 VIDEO4LINUX-2 DRIVER
-P:	Michael Hunold
-M:	michael@mihu.de
+M:	Michael Hunold <michael@mihu.de>
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 W:	http://www.mihu.de/linux/saa7146
@@ -5083,31 +4367,26 @@ F:	drivers/media/video/*7146*
 F:	include/media/*7146*
 
 SC1200 WDT DRIVER
-P:	Zwane Mwaikambo
-M:	zwane@arm.linux.org.uk
+M:	Zwane Mwaikambo <zwane@arm.linux.org.uk>
 S:	Maintained
 F:	drivers/watchdog/sc1200wdt.c
 
 SCHEDULER
-P:	Ingo Molnar
-M:	mingo@elte.hu
-P:	Peter Zijlstra
-M:	peterz@infradead.org
+M:	Ingo Molnar <mingo@elte.hu>
+M:	Peter Zijlstra <peterz@infradead.org>
 S:	Maintained
 F:	kernel/sched*
 F:	include/linux/sched.h
 
 SCSI CDROM DRIVER
-P:	Jens Axboe
-M:	axboe@kernel.dk
+M:	Jens Axboe <axboe@kernel.dk>
 L:	linux-scsi@vger.kernel.org
 W:	http://www.kernel.dk
 S:	Maintained
 F:	drivers/scsi/sr*
 
 SCSI SG DRIVER
-P:	Doug Gilbert
-M:	dgilbert@interlog.com
+M:	Doug Gilbert <dgilbert@interlog.com>
 L:	linux-scsi@vger.kernel.org
 W:	http://www.torque.net/sg
 S:	Maintained
@@ -5115,8 +4394,7 @@ F:	drivers/scsi/sg.c
 F:	include/scsi/sg.h
 
 SCSI SUBSYSTEM
-P:	James E.J. Bottomley
-M:	James.Bottomley@HansenPartnership.com
+M:	"James E.J. Bottomley" <James.Bottomley@HansenPartnership.com>
 L:	linux-scsi@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6.git
@@ -5126,18 +4404,15 @@ F:	drivers/scsi/
 F:	include/scsi/
 
 SCSI TAPE DRIVER
-P:	Kai Mäkisara
-M:	Kai.Makisara@kolumbus.fi
+M:	Kai Mäkisara <Kai.Makisara@kolumbus.fi>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	Documentation/scsi/st.txt
 F:	drivers/scsi/st*
 
 SCTP PROTOCOL
-P:	Vlad Yasevich
-M:	vladislav.yasevich@hp.com
-P:	Sridhar Samudrala
-M:	sri@us.ibm.com
+M:	Vlad Yasevich <vladislav.yasevich@hp.com>
+M:	Sridhar Samudrala <sri@us.ibm.com>
 L:	linux-sctp@vger.kernel.org
 W:	http://lksctp.sourceforge.net
 S:	Supported
@@ -5147,8 +4422,7 @@ F:	include/net/sctp/
 F:	net/sctp/
 
 SCx200 CPU SUPPORT
-P:	Jim Cromie
-M:	jim.cromie@gmail.com
+M:	Jim Cromie <jim.cromie@gmail.com>
 S:	Odd Fixes
 F:	Documentation/i2c/busses/scx200_acb
 F:	arch/x86/kernel/scx200_32.c
@@ -5158,49 +4432,42 @@ F:	drivers/mtd/maps/scx200_docflash.c
 F:	include/linux/scx200.h
 
 SCx200 GPIO DRIVER
-P:	Jim Cromie
-M:	jim.cromie@gmail.com
+M:	Jim Cromie <jim.cromie@gmail.com>
 S:	Maintained
 F:	drivers/char/scx200_gpio.c
 F:	include/linux/scx200_gpio.h
 
 SCx200 HRT CLOCKSOURCE DRIVER
-P:	Jim Cromie
-M:	jim.cromie@gmail.com
+M:	Jim Cromie <jim.cromie@gmail.com>
 S:	Maintained
 F:	drivers/clocksource/scx200_hrt.c
 
 SDRICOH_CS MMC/SD HOST CONTROLLER INTERFACE DRIVER
-P:	Sascha Sommer
-M:	saschasommer@freenet.de
+M:	Sascha Sommer <saschasommer@freenet.de>
 L:	sdricohcs-devel@lists.sourceforge.net (subscribers-only)
 S:	Maintained
 F:	drivers/mmc/host/sdricoh_cs.c
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER
-P:	Pierre Ossman
-M:	pierre@ossman.eu
+M:	Pierre Ossman <pierre@ossman.eu>
 L:	sdhci-devel@lists.ossman.eu
 S:	Maintained
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE, OPEN FIRMWARE BINDINGS (SDHCI-OF)
-P:	Anton Vorontsov
-M:	avorontsov@ru.mvista.com
+M:	Anton Vorontsov <avorontsov@ru.mvista.com>
 L:	linuxppc-dev@ozlabs.org
 L:	sdhci-devel@lists.ossman.eu
 S:	Maintained
 F:	drivers/mmc/host/sdhci.*
 
 SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) SAMSUNG DRIVER
-P:	Ben Dooks
-M:	ben-linux@fluff.org
+M:	Ben Dooks <ben-linux@fluff.org>
 L:	sdhci-devel@lists.ossman.eu
 S:	Maintained
 F:	drivers/mmc/host/sdhci-s3c.c
 
 SECURITY SUBSYSTEM
-P:	James Morris
-M:	jmorris@namei.org
+M:	James Morris <jmorris@namei.org>
 L:	linux-security-module@vger.kernel.org (suggested Cc:)
 T:	git git://www.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
 W:	http://security.wiki.kernel.org/
@@ -5208,17 +4475,13 @@ S:	Supported
 F:	security/
 
 SECURITY CONTACT
-P:	Security Officers
-M:	security@kernel.org
+M:	Security Officers <security@kernel.org>
 S:	Supported
 
 SELINUX SECURITY MODULE
-P:	Stephen Smalley
-M:	sds@tycho.nsa.gov
-P:	James Morris
-M:	jmorris@namei.org
-P:	Eric Paris
-M:	eparis@parisplace.org
+M:	Stephen Smalley <sds@tycho.nsa.gov>
+M:	James Morris <jmorris@namei.org>
+M:	Eric Paris <eparis@parisplace.org>
 L:	selinux@tycho.nsa.gov (subscribers-only, general discussion)
 W:	http://selinuxproject.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/security-testing-2.6.git
@@ -5227,15 +4490,13 @@ F:	include/linux/selinux*
 F:	security/selinux/
 
 SENSABLE PHANTOM
-P:	Jiri Slaby
-M:	jirislaby@gmail.com
+M:	Jiri Slaby <jirislaby@gmail.com>
 S:	Maintained
 F:	drivers/misc/phantom.c
 F:	include/linux/phantom.h
 
 SERIAL ATA (SATA) SUBSYSTEM
-P:	Jeff Garzik
-M:	jgarzik@pobox.com
+M:	Jeff Garzik <jgarzik@pobox.com>
 L:	linux-ide@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jgarzik/libata-dev.git
 S:	Supported
@@ -5244,10 +4505,8 @@ F:	include/linux/ata.h
 F:	include/linux/libata.h
 
 SERVER ENGINES 10Gbps NIC - BladeEngine 2 DRIVER
-P:	Sathya Perla
-M:	sathyap@serverengines.com
-P:	Subbu Seetharaman
-M:	subbus@serverengines.com
+M:	Sathya Perla <sathyap@serverengines.com>
+M:	Subbu Seetharaman <subbus@serverengines.com>
 L:	netdev@vger.kernel.org
 W:	http://www.serverengines.com
 S:	Supported
@@ -5256,20 +4515,17 @@ F:	drivers/net/benet/
 SFC NETWORK DRIVER
 P:	Steve Hodgson
 P:	Ben Hutchings
-P:	Robert Stonehouse
-M:	linux-net-drivers@solarflare.com
+M:	Robert Stonehouse <linux-net-drivers@solarflare.com>
 S:	Supported
 F:	drivers/net/sfc/
 
 SGI GRU DRIVER
-P:	Jack Steiner
-M:	steiner@sgi.com
+M:	Jack Steiner <steiner@sgi.com>
 S:	Maintained
 F:	drivers/misc/sgi-gru/
 
 SGI SN-IA64 (Altix) SERIAL CONSOLE DRIVER
-P:	Pat Gefre
-M:	pfg@sgi.com
+M:	Pat Gefre <pfg@sgi.com>
 L:	linux-ia64@vger.kernel.org
 S:	Supported
 F:	Documentation/ia64/serial.txt
@@ -5277,22 +4533,19 @@ F:	drivers/serial/ioc?_serial.c
 F:	include/linux/ioc?.h
 
 SGI VISUAL WORKSTATION 320 AND 540
-P:	Andrey Panin
-M:	pazke@donpac.ru
+M:	Andrey Panin <pazke@donpac.ru>
 L:	linux-visws-devel@lists.sf.net
 W:	http://linux-visws.sf.net
 S:	Maintained for 2.6.
 F:	Documentation/sgi-visws.txt
 
 SGI XP/XPC/XPNET DRIVER
-P:	Robin Holt
-M:	holt@sgi.com
+M:	Robin Holt <holt@sgi.com>
 S:	Maintained
 F:	drivers/misc/sgi-xp/
 
 SHARP LH SUPPORT (LH7952X & LH7A40X)
-P:	Marc Singer
-M:	elf@buici.com
+M:	Marc Singer <elf@buici.com>
 W:	http://projects.buici.com/arm
 L:	linux-arm-kernel@lists.arm.linux.org.uk	(subscribers-only)
 S:	Maintained
@@ -5303,23 +4556,20 @@ F:	drivers/usb/gadget/lh7a40*
 F:	drivers/usb/host/ohci-lh7a40*
 
 SHPC HOTPLUG DRIVER
-P:	Kristen Carlson Accardi
-M:	kristen.c.accardi@intel.com
+M:	Kristen Carlson Accardi <kristen.c.accardi@intel.com>
 L:	linux-pci@vger.kernel.org
 S:	Supported
 F:	drivers/pci/hotplug/shpchp*
 
 SIMTEC EB110ATX (Chalice CATS)
 P:	Ben Dooks
-P:	Vincent Sanders
-M:	support@simtec.co.uk
+M:	Vincent Sanders <support@simtec.co.uk>
 W:	http://www.simtec.co.uk/products/EB110ATX/
 S:	Supported
 
 SIMTEC EB2410ITX (BAST)
 P:	Ben Dooks
-P:	Vincent Sanders
-M:	support@simtec.co.uk
+M:	Vincent Sanders <support@simtec.co.uk>
 W:	http://www.simtec.co.uk/products/EB2410ITX/
 S:	Supported
 F:	arch/arm/mach-s3c2410/
@@ -5327,31 +4577,27 @@ F:	drivers/*/*s3c2410*
 F:	drivers/*/*/*s3c2410*
 
 SIS 190 ETHERNET DRIVER
-P:	Francois Romieu
-M:	romieu@fr.zoreil.com
+M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/sis190.c
 
 SIS 900/7016 FAST ETHERNET DRIVER
-P:	Daniele Venzano
-M:	venza@brownhat.org
+M:	Daniele Venzano <venza@brownhat.org>
 W:	http://www.brownhat.org/sis900.html
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/sis900.*
 
 SIS 96X I2C/SMBUS DRIVER
-P:	Mark M. Hoffman
-M:	mhoffman@lightlink.com
+M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	Documentation/i2c/busses/i2c-sis96x
 F:	drivers/i2c/busses/i2c-sis96x.c
 
 SIS FRAMEBUFFER DRIVER
-P:	Thomas Winischhofer
-M:	thomas@winischhofer.net
+M:	Thomas Winischhofer <thomas@winischhofer.net>
 W:	http://www.winischhofer.net/linuxsisvga.shtml
 S:	Maintained
 F:	Documentation/fb/sisfb.txt
@@ -5359,70 +4605,59 @@ F:	drivers/video/sis/
 F:	include/video/sisfb.h
 
 SIS USB2VGA DRIVER
-P:	Thomas Winischhofer
-M:	thomas@winischhofer.net
+M:	Thomas Winischhofer <thomas@winischhofer.net>
 W:	http://www.winischhofer.at/linuxsisusbvga.shtml
 S:	Maintained
 F:	drivers/usb/misc/sisusbvga/
 
 SKGE, SKY2 10/100/1000 GIGABIT ETHERNET DRIVERS
-P:	Stephen Hemminger
-M:	shemminger@linux-foundation.org
+M:	Stephen Hemminger <shemminger@linux-foundation.org>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/skge.*
 F:	drivers/net/sky2.*
 
 SLAB ALLOCATOR
-P:	Christoph Lameter
-M:	cl@linux-foundation.org
-P:	Pekka Enberg
-M:	penberg@cs.helsinki.fi
-P:	Matt Mackall
-M:	mpm@selenic.com
+M:	Christoph Lameter <cl@linux-foundation.org>
+M:	Pekka Enberg <penberg@cs.helsinki.fi>
+M:	Matt Mackall <mpm@selenic.com>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	include/linux/sl?b*.h
 F:	mm/sl?b.c
 
 SMC91x ETHERNET DRIVER
-P:	Nicolas Pitre
-M:	nico@cam.org
+M:	Nicolas Pitre <nico@cam.org>
 S:	Maintained
 F:	drivers/net/smc91x.*
 
 SMSC47B397 HARDWARE MONITOR DRIVER
-P:	Mark M. Hoffman
-M:	mhoffman@lightlink.com
+M:	"Mark M. Hoffman" <mhoffman@lightlink.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/smsc47b397
 F:	drivers/hwmon/smsc47b397.c
 
 SMSC911x ETHERNET DRIVER
-P:	Steve Glendinning
-M:	steve.glendinning@smsc.com
+M:	Steve Glendinning <steve.glendinning@smsc.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	include/linux/smsc911x.h
 F:	drivers/net/smsc911x.*
 
 SMSC9420 PCI ETHERNET DRIVER
-P:	Steve Glendinning
-M:	steve.glendinning@smsc.com
+M:	Steve Glendinning <steve.glendinning@smsc.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/smsc9420.*
 
 SMX UIO Interface
-P:	Ben Nizette
-M:	bn@niasdigital.com
+M:	Ben Nizette <bn@niasdigital.com>
 S:	Maintained
 F:	drivers/uio/uio_smx.c
 
 SN-IA64 (Itanium) SUB-PLATFORM
-P:	Jes Sorensen
-M:	jes@sgi.com
+M:	Jes Sorensen <jes@sgi.com>
 L:	linux-altix@sgi.com
 L:	linux-ia64@vger.kernel.org
 W:	http://www.sgi.com/altix
@@ -5430,8 +4665,7 @@ S:	Maintained
 F:	arch/ia64/sn/
 
 SOC-CAMERA V4L2 SUBSYSTEM
-P:	Guennadi Liakhovetski
-M:	g.liakhovetski@gmx.de
+M:	Guennadi Liakhovetski <g.liakhovetski@gmx.de>
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
 S:	Maintained
@@ -5439,37 +4673,32 @@ F:	include/media/v4l2*
 F:	drivers/media/video/v4l2*
 
 SOEKRIS NET48XX LED SUPPORT
-P:	Chris Boot
-M:	bootc@bootc.net
+M:	Chris Boot <bootc@bootc.net>
 S:	Maintained
 F:	drivers/leds/leds-net48xx.c
 
 SOFTWARE RAID (Multiple Disks) SUPPORT
-P:	Neil Brown
-M:	neilb@suse.de
+M:	Neil Brown <neilb@suse.de>
 L:	linux-raid@vger.kernel.org
 S:	Supported
 F:	drivers/md/
 F:	include/linux/raid/
 
 SONIC NETWORK DRIVER
-P:	Thomas Bogendoerfer
-M:	tsbogend@alpha.franken.de
+M:	Thomas Bogendoerfer <tsbogend@alpha.franken.de>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/sonic.*
 
 SONICS SILICON BACKPLANE DRIVER (SSB)
-P:	Michael Buesch
-M:	mb@bu3sch.de
+M:	Michael Buesch <mb@bu3sch.de>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/ssb/
 F:	include/linux/ssb/
 
 SONY VAIO CONTROL DEVICE DRIVER
-P:	Mattia Dongili
-M:	malattia@linux.it
+M:	Mattia Dongili <malattia@linux.it>
 L:	linux-acpi@vger.kernel.org
 W:	http://www.linux.it/~malattia/wiki/index.php/Sony_drivers
 S:	Maintained
@@ -5479,17 +4708,14 @@ F:	drivers/platform/x86/sony-laptop.c
 F:	include/linux/sony-laptop.h
 
 SONY MEMORYSTICK CARD SUPPORT
-P:	Alex Dubov
-M:	oakad@yahoo.com
+M:	Alex Dubov <oakad@yahoo.com>
 W:	http://tifmxx.berlios.de/
 S:	Maintained
 F:	drivers/memstick/host/tifm_ms.c
 
 SOUND
-P:	Jaroslav Kysela
-M:	perex@perex.cz
-P:	Takashi Iwai
-M:	tiwai@suse.de
+M:	Jaroslav Kysela <perex@perex.cz>
+M:	Takashi Iwai <tiwai@suse.de>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:	http://www.alsa-project.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
@@ -5500,10 +4726,8 @@ F:	include/sound/
 F:	sound/
 
 SOUND - SOC LAYER / DYNAMIC AUDIO POWER MANAGEMENT (ASoC)
-P:	Liam Girdwood
-M:	lrg@slimlogic.co.uk
-P:	Mark Brown
-M:	broonie@opensource.wolfsonmicro.com
+M:	Liam Girdwood <lrg@slimlogic.co.uk>
+M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound-2.6.git
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:	http://alsa-project.org/main/index.php/ASoC
@@ -5512,8 +4736,7 @@ F:	sound/soc/
 F:	include/sound/soc*
 
 SPARC + UltraSPARC (sparc/sparc64)
-P:	David S. Miller
-M:	davem@davemloft.net
+M:	"David S. Miller" <davem@davemloft.net>
 L:	sparclinux@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-2.6.git
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next-2.6.git
@@ -5521,15 +4744,13 @@ S:	Maintained
 F:	arch/sparc/
 
 SPECIALIX IO8+ MULTIPORT SERIAL CARD DRIVER
-P:	Roger Wolff
-M:	R.E.Wolff@BitWizard.nl
+M:	Roger Wolff <R.E.Wolff@BitWizard.nl>
 S:	Supported
 F:	Documentation/serial/specialix.txt
 F:	drivers/char/specialix*
 
 SPI SUBSYSTEM
-P:	David Brownell
-M:	dbrownell@users.sourceforge.net
+M:	David Brownell <dbrownell@users.sourceforge.net>
 L:	spi-devel-general@lists.sourceforge.net
 S:	Maintained
 F:	Documentation/spi/
@@ -5537,18 +4758,15 @@ F:	drivers/spi/
 F:	include/linux/spi/
 
 SPIDERNET NETWORK DRIVER for CELL
-P:	Ishizaki Kou
-M:	kou.ishizaki@toshiba.co.jp
-P:	Jens Osterkamp
-M:	jens@de.ibm.com
+M:	Ishizaki Kou <kou.ishizaki@toshiba.co.jp>
+M:	Jens Osterkamp <jens@de.ibm.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	Documentation/networking/spider_net.txt
 F:	drivers/net/spider_net*
 
 SPU FILE SYSTEM
-P:	Jeremy Kerr
-M:	jk@ozlabs.org
+M:	Jeremy Kerr <jk@ozlabs.org>
 L:	linuxppc-dev@ozlabs.org
 L:	cbe-oss-dev@ozlabs.org
 W:	http://www.ibm.com/developerworks/power/cell/
@@ -5557,8 +4775,7 @@ F:	Documentation/filesystems/spufs.txt
 F:	arch/powerpc/platforms/cell/spufs/
 
 SQUASHFS FILE SYSTEM
-P:	Phillip Lougher
-M:	phillip@lougher.demon.co.uk
+M:	Phillip Lougher <phillip@lougher.demon.co.uk>
 L:	squashfs-devel@lists.sourceforge.net (subscribers-only)
 W:	http://squashfs.org.uk
 S:	Maintained
@@ -5566,30 +4783,25 @@ F:	Documentation/filesystems/squashfs.txt
 F:	fs/squashfs/
 
 SRM (Alpha) environment access
-P:	Jan-Benedict Glaw
-M:	jbglaw@lug-owl.de
+M:	Jan-Benedict Glaw <jbglaw@lug-owl.de>
 S:	Maintained
 F:	arch/alpha/kernel/srm_env.c
 
 STABLE BRANCH
-P:	Greg Kroah-Hartman
-M:	greg@kroah.com
-P:	Chris Wright
-M:	chrisw@sous-sol.org
+M:	Greg Kroah-Hartman <greg@kroah.com>
+M:	Chris Wright <chrisw@sous-sol.org>
 L:	stable@kernel.org
 S:	Maintained
 
 STAGING SUBSYSTEM
-P:	Greg Kroah-Hartman
-M:	gregkh@suse.de
+M:	Greg Kroah-Hartman <gregkh@suse.de>
 T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
 L:	devel@driverdev.osuosl.org
 S:	Maintained
 F:	drivers/staging/
 
 STARFIRE/DURALAN NETWORK DRIVER
-P:	Ion Badulescu
-M:	ionut@badula.org
+M:	Ion Badulescu <ionut@badula.org>
 S:	Odd Fixes
 F:	drivers/net/starfire*
 
@@ -5599,15 +4811,13 @@ F:	drivers/net/wireless/strip.c
 F:	include/linux/if_strip.h
 
 STRADIS MPEG-2 DECODER DRIVER
-P:	Nathan Laredo
-M:	laredo@gnu.org
+M:	Nathan Laredo <laredo@gnu.org>
 W:	http://www.stradis.com/
 S:	Maintained
 F:	drivers/media/video/stradis.c
 
 SUN3/3X
-P:	Sam Creasey
-M:	sammy@sammy.net
+M:	Sam Creasey <sammy@sammy.net>
 W:	http://sammy.net/sun3/
 S:	Maintained
 F:	arch/m68k/kernel/*sun3*
@@ -5615,8 +4825,7 @@ F:	arch/m68k/sun3*/
 F:	arch/m68k/include/asm/sun3*
 
 SUPERH
-P:	Paul Mundt
-M:	lethal@linux-sh.org
+M:	Paul Mundt <lethal@linux-sh.org>
 L:	linux-sh@vger.kernel.org
 W:	http://www.linux-sh.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6.git
@@ -5626,12 +4835,9 @@ F:	arch/sh/
 F:	drivers/sh/
 
 SUSPEND TO RAM
-P:	Len Brown
-M:	len.brown@intel.com
-P:	Pavel Machek
-M:	pavel@ucw.cz
-P:	Rafael J. Wysocki
-M:	rjw@sisk.pl
+M:	Len Brown <len.brown@intel.com>
+M:	Pavel Machek <pavel@ucw.cz>
+M:	"Rafael J. Wysocki" <rjw@sisk.pl>
 L:	linux-pm@lists.linux-foundation.org
 S:	Supported
 F:	Documentation/power/
@@ -5643,32 +4849,28 @@ F:	include/linux/freezer.h
 F:	include/linux/pm.h
 
 SVGA HANDLING
-P:	Martin Mares
-M:	mj@ucw.cz
+M:	Martin Mares <mj@ucw.cz>
 L:	linux-video@atrey.karlin.mff.cuni.cz
 S:	Maintained
 F:	Documentation/svga.txt
 F:	arch/x86/boot/video*
 
 SYSV FILESYSTEM
-P:	Christoph Hellwig
-M:	hch@infradead.org
+M:	Christoph Hellwig <hch@infradead.org>
 S:	Maintained
 F:	Documentation/filesystems/sysv-fs.txt
 F:	fs/sysv/
 F:	include/linux/sysv_fs.h
 
 TASKSTATS STATISTICS INTERFACE
-P:	Balbir Singh
-M:	balbir@linux.vnet.ibm.com
+M:	Balbir Singh <balbir@linux.vnet.ibm.com>
 S:	Maintained
 F:	Documentation/accounting/taskstats*
 F:	include/linux/taskstats*
 F:	kernel/taskstats.c
 
 TC CLASSIFIER
-P:	Jamal Hadi Salim
-M:	hadi@cyberus.ca
+M:	Jamal Hadi Salim <hadi@cyberus.ca>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	include/linux/pkt_cls.h
@@ -5676,38 +4878,31 @@ F:	include/net/pkt_cls.h
 F:	net/sched/
 
 TCP LOW PRIORITY MODULE
-P:	Wong Hoi Sing, Edison
-M:	hswong3i@gmail.com
-P:	Hung Hing Lun, Mike
-M:	hlhung3i@gmail.com
+M:	"Wong Hoi Sing, Edison" <hswong3i@gmail.com>
+M:	"Hung Hing Lun, Mike" <hlhung3i@gmail.com>
 W:	http://tcp-lp-mod.sourceforge.net/
 S:	Maintained
 F:	net/ipv4/tcp_lp.c
 
 TEHUTI ETHERNET DRIVER
-P:	Alexander Indenbaum
-M:	baum@tehutinetworks.net
-P:	Andy Gospodarek
-M:	andy@greyhouse.net
+M:	Alexander Indenbaum <baum@tehutinetworks.net>
+M:	Andy Gospodarek <andy@greyhouse.net>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/tehuti*
 
 Telecom Clock Driver for MCPL0010
-P:	Mark Gross
-M:	mark.gross@intel.com
+M:	Mark Gross <mark.gross@intel.com>
 S:	Supported
 F:	drivers/char/tlclk.c
 
 TENSILICA XTENSA PORT (xtensa)
-P:	Chris Zankel
-M:	chris@zankel.net
+M:	Chris Zankel <chris@zankel.net>
 S:	Maintained
 F:	arch/xtensa/
 
 THINKPAD ACPI EXTRAS DRIVER
-P:	Henrique de Moraes Holschuh
-M:	ibm-acpi@hmh.eng.br
+M:	Henrique de Moraes Holschuh <ibm-acpi@hmh.eng.br>
 L:	ibm-acpi-devel@lists.sourceforge.net
 W:	http://ibm-acpi.sourceforge.net
 W:	http://thinkwiki.org/wiki/Ibm-acpi
@@ -5716,27 +4911,22 @@ S:	Maintained
 F:	drivers/platform/x86/thinkpad_acpi.c
 
 TI FLASH MEDIA INTERFACE DRIVER
-P:	Alex Dubov
-M:	oakad@yahoo.com
+M:	Alex Dubov <oakad@yahoo.com>
 S:	Maintained
 F:	drivers/misc/tifm*
 F:	drivers/mmc/host/tifm_sd.c
 F:	include/linux/tifm.h
 
 TI TWL4030 SERIES SOC CODEC DRIVER
-P:	Peter Ujfalusi
-M:	peter.ujfalusi@nokia.com
+M:	Peter Ujfalusi <peter.ujfalusi@nokia.com>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 S:	Maintained
 F:	sound/soc/codecs/twl4030*
 
 TIPC NETWORK LAYER
-P:	Per Liden
-M:	per.liden@ericsson.com
-P:	Jon Maloy
-M:	jon.maloy@ericsson.com
-P:	Allan Stephens
-M:	allan.stephens@windriver.com
+M:	Per Liden <per.liden@ericsson.com>
+M:	Jon Maloy <jon.maloy@ericsson.com>
+M:	Allan Stephens <allan.stephens@windriver.com>
 L:	tipc-discussion@lists.sourceforge.net
 W:	http://tipc.sourceforge.net/
 W:	http://tipc.cslab.ericsson.net/
@@ -5747,8 +4937,7 @@ F:	include/net/tipc/
 F:	net/tipc/
 
 TLAN NETWORK DRIVER
-P:	Samuel Chessman
-M:	chessman@tux.org
+M:	Samuel Chessman <chessman@tux.org>
 L:	tlan-devel@lists.sourceforge.net (subscribers-only)
 W:	http://sourceforge.net/projects/tlan/
 S:	Maintained
@@ -5756,10 +4945,8 @@ F:	Documentation/networking/tlan.txt
 F:	drivers/net/tlan.*
 
 TOMOYO SECURITY MODULE
-P:	Kentaro Takeda
-M:	takedakn@nttdata.co.jp
-P:	Tetsuo Handa
-M:	penguin-kernel@I-love.SAKURA.ne.jp
+M:	Kentaro Takeda <takedakn@nttdata.co.jp>
+M:	Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
 L:	tomoyo-users-en@lists.sourceforge.jp (subscribers-only, for developers and users in English)
 L:	tomoyo-dev@lists.sourceforge.jp (subscribers-only, for developers in Japanese)
 L:	tomoyo-users@lists.sourceforge.jp (subscribers-only, for users in Japanese)
@@ -5773,8 +4960,7 @@ S:	Orphan
 F:	drivers/platform/x86/toshiba_acpi.c
 
 TOSHIBA SMM DRIVER
-P:	Jonathan Buzzard
-M:	jonathan@buzzard.org.uk
+M:	Jonathan Buzzard <jonathan@buzzard.org.uk>
 L:	tlinux-users@tce.toshiba-dme.co.jp
 W:	http://www.buzzard.org.uk/toshiba/
 S:	Maintained
@@ -5782,43 +4968,34 @@ F:	drivers/char/toshiba.c
 F:	include/linux/toshiba.h
 
 TMIO MMC DRIVER
-P:	Ian Molton
-M:	ian@mnementh.co.uk
+M:	Ian Molton <ian@mnementh.co.uk>
 S:	Maintained
 F:	drivers/mmc/host/tmio_mmc.*
 
 TMPFS (SHMEM FILESYSTEM)
-P:	Hugh Dickins
-M:	hugh.dickins@tiscali.co.uk
+M:	Hugh Dickins <hugh.dickins@tiscali.co.uk>
 L:	linux-mm@kvack.org
 S:	Maintained
 F:	include/linux/shmem_fs.h
 F:	mm/shmem.c
 
 TPM DEVICE DRIVER
-P:	Debora Velarde
-M:	debora@linux.vnet.ibm.com
-P:	Rajiv Andrade
-M:	srajiv@linux.vnet.ibm.com
+M:	Debora Velarde <debora@linux.vnet.ibm.com>
+M:	Rajiv Andrade <srajiv@linux.vnet.ibm.com>
 W:	http://tpmdd.sourceforge.net
-P:	Marcel Selhorst
-M:	m.selhorst@sirrix.com
+M:	Marcel Selhorst <m.selhorst@sirrix.com>
 W:	http://www.sirrix.com
 L:	tpmdd-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/char/tpm/
 
 TRIVIAL PATCHES
-P:	Jiri Kosina
-M:	trivial@kernel.org
+M:	Jiri Kosina <trivial@kernel.org>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial.git
 S:	Maintained
 
 TTY LAYER
-P:	Alan Cox
-M:	alan@lxorguk.ukuu.org.uk
-S:	Maintained
-T:	stgit http://zeniv.linux.org.uk/~alan/ttydev/
+S:	Orphan
 F:	drivers/char/tty_*
 F:	drivers/serial/serial_core.c
 F:	include/linux/serial_core.h
@@ -5826,17 +5003,14 @@ F:	include/linux/serial.h
 F:	include/linux/tty.h
 
 TULIP NETWORK DRIVERS
-P:	Grant Grundler
-M:	grundler@parisc-linux.org
-P:	Kyle McMartin
-M:	kyle@mcmartin.ca
+M:	Grant Grundler <grundler@parisc-linux.org>
+M:	Kyle McMartin <kyle@mcmartin.ca>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/tulip/
 
 TUN/TAP driver
-P:	Maxim Krasnyansky
-M:	maxk@qualcomm.com
+M:	Maxim Krasnyansky <maxk@qualcomm.com>
 L:	vtun@office.satix.net
 W:	http://vtun.sourceforge.net/tun
 S:	Maintained
@@ -5844,24 +5018,20 @@ F:	Documentation/networking/tuntap.txt
 F:	arch/um/os-Linux/drivers/
 
 TURBOCHANNEL SUBSYSTEM
-P:	Maciej W. Rozycki
-M:	macro@linux-mips.org
+M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 S:	Maintained
 F:	drivers/tc/
 F:	include/linux/tc.h
 
 U14-34F SCSI DRIVER
-P:	Dario Ballabio
-M:	ballabio_dario@emc.com
+M:	Dario Ballabio <ballabio_dario@emc.com>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/u14-34f.c
 
 UBI FILE SYSTEM (UBIFS)
-P:	Artem Bityutskiy
-M:	dedekind@infradead.org
-P:	Adrian Hunter
-M:	adrian.hunter@nokia.com
+M:	Artem Bityutskiy <dedekind@infradead.org>
+M:	Adrian Hunter <adrian.hunter@nokia.com>
 L:	linux-mtd@lists.infradead.org
 T:	git git://git.infradead.org/ubifs-2.6.git
 W:	http://www.linux-mtd.infradead.org/doc/ubifs.html
@@ -5870,37 +5040,32 @@ F:	Documentation/filesystems/ubifs.txt
 F:	fs/ubifs/
 
 UCLINUX (AND M68KNOMMU)
-P:	Greg Ungerer
-M:	gerg@uclinux.org
+M:	Greg Ungerer <gerg@uclinux.org>
 W:	http://www.uclinux.org/
 L:	uclinux-dev@uclinux.org  (subscribers-only)
 S:	Maintained
 F:	arch/m68knommu/
 
 UCLINUX FOR RENESAS H8/300 (H8300)
-P:	Yoshinori Sato
-M:	ysato@users.sourceforge.jp
+M:	Yoshinori Sato <ysato@users.sourceforge.jp>
 W:	http://uclinux-h8.sourceforge.jp/
 S:	Supported
 
 UDF FILESYSTEM
-P:	Jan Kara
-M:	jack@suse.cz
+M:	Jan Kara <jack@suse.cz>
 W:	http://linux-udf.sourceforge.net
 S:	Maintained
 F:	Documentation/filesystems/udf.txt
 F:	fs/udf/
 
 UFS FILESYSTEM
-P:	Evgeniy Dushistov
-M:	dushistov@mail.ru
+M:	Evgeniy Dushistov <dushistov@mail.ru>
 S:	Maintained
 F:	Documentation/filesystems/ufs.txt
 F:	fs/ufs/
 
 ULTRA-WIDEBAND (UWB) SUBSYSTEM:
-P:	David Vrabel
-M:	david.vrabel@csr.com
+M:	David Vrabel <david.vrabel@csr.com>
 L:	linux-usb@vger.kernel.org
 S:	Supported
 F:	drivers/uwb/*
@@ -5908,8 +5073,7 @@ F:	include/linux/uwb.h
 F:	include/linux/uwb/
 
 UNIFORM CDROM DRIVER
-P:	Jens Axboe
-M:	axboe@kernel.dk
+M:	Jens Axboe <axboe@kernel.dk>
 W:	http://www.kernel.dk
 S:	Maintained
 F:	Documentation/cdrom/
@@ -5917,8 +5081,7 @@ F:	drivers/cdrom/cdrom.c
 F:	include/linux/cdrom.h
 
 UNSORTED BLOCK IMAGES (UBI)
-P:	Artem Bityutskiy
-M:	dedekind@infradead.org
+M:	Artem Bityutskiy <dedekind@infradead.org>
 W:	http://www.linux-mtd.infradead.org/
 L:	linux-mtd@lists.infradead.org
 T:	git git://git.infradead.org/ubi-2.6.git
@@ -5928,23 +5091,20 @@ F:	include/linux/mtd/ubi.h
 F:	include/mtd/ubi-user.h
 
 USB ACM DRIVER
-P:	Oliver Neukum
-M:	oliver@neukum.name
+M:	Oliver Neukum <oliver@neukum.name>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	Documentation/usb/acm.txt
 F:	drivers/usb/class/cdc-acm.*
 
 USB BLOCK DRIVER (UB ub)
-P:	Pete Zaitcev
-M:	zaitcev@redhat.com
+M:	Pete Zaitcev <zaitcev@redhat.com>
 L:	linux-usb@vger.kernel.org
 S:	Supported
 F:	drivers/block/ub.c
 
 USB CDC ETHERNET DRIVER
-P:	Greg Kroah-Hartman
-M:	greg@kroah.com
+M:	Greg Kroah-Hartman <greg@kroah.com>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 W:	http://www.kroah.com/linux-usb/
@@ -5952,39 +5112,34 @@ F:	drivers/net/usb/cdc_*.c
 F:	include/linux/usb/cdc.h
 
 USB CYPRESS C67X00 DRIVER
-P:	Peter Korsgaard
-M:	jacmet@sunsite.dk
+M:	Peter Korsgaard <jacmet@sunsite.dk>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/c67x00/
 
 USB DAVICOM DM9601 DRIVER
-P:	Peter Korsgaard
-M:	jacmet@sunsite.dk
+M:	Peter Korsgaard <jacmet@sunsite.dk>
 L:	netdev@vger.kernel.org
 W:	http://www.linux-usb.org/usbnet
 S:	Maintained
 F:	drivers/net/usb/dm9601.c
 
 USB DIAMOND RIO500 DRIVER
-P:	Cesar Miquel
-M:	miquel@df.uba.ar
+M:	Cesar Miquel <miquel@df.uba.ar>
 L:	rio500-users@lists.sourceforge.net
 W:	http://rio500.sourceforge.net
 S:	Maintained
 F:	drivers/usb/misc/rio500*
 
 USB EHCI DRIVER
-P:	David Brownell
-M:	dbrownell@users.sourceforge.net
+M:	David Brownell <dbrownell@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
 S:	Odd Fixes
 F:	Documentation/usb/ehci.txt
 F:	drivers/usb/host/ehci*
 
 USB ET61X[12]51 DRIVER
-P:	Luca Risolia
-M:	luca.risolia@studio.unibo.it
+M:	Luca Risolia <luca.risolia@studio.unibo.it>
 L:	linux-usb@vger.kernel.org
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -5993,8 +5148,7 @@ S:	Maintained
 F:	drivers/media/video/et61x251/
 
 USB GADGET/PERIPHERAL SUBSYSTEM
-P:	David Brownell
-M:	dbrownell@users.sourceforge.net
+M:	David Brownell <dbrownell@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org/gadget
 S:	Maintained
@@ -6002,8 +5156,7 @@ F:	drivers/usb/gadget/
 F:	include/linux/usb/gadget*
 
 USB HID/HIDBP DRIVERS (USB KEYBOARDS, MICE, REMOTE CONTROLS, ...)
-P:	Jiri Kosina
-M:	jkosina@suse.cz
+M:	Jiri Kosina <jkosina@suse.cz>
 L:	linux-usb@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid.git
 S:	Maintained
@@ -6011,23 +5164,20 @@ F:	Documentation/usb/hiddev.txt
 F:	drivers/hid/usbhid/
 
 USB ISP116X DRIVER
-P:	Olav Kongas
-M:	ok@artecdesign.ee
+M:	Olav Kongas <ok@artecdesign.ee>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/host/isp116x*
 F:	include/linux/usb/isp116x.h
 
 USB KAWASAKI LSI DRIVER
-P:	Oliver Neukum
-M:	oliver@neukum.name
+M:	Oliver Neukum <oliver@neukum.name>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/serial/kl5kusb105.*
 
 USB MASS STORAGE DRIVER
-P:	Matthew Dharm
-M:	mdharm-usb@one-eyed-alien.net
+M:	Matthew Dharm <mdharm-usb@one-eyed-alien.net>
 L:	linux-usb@vger.kernel.org
 L:	usb-storage@lists.one-eyed-alien.net
 S:	Maintained
@@ -6035,31 +5185,27 @@ W:	http://www.one-eyed-alien.net/~mdharm/linux-usb/
 F:	drivers/usb/storage/
 
 USB OHCI DRIVER
-P:	David Brownell
-M:	dbrownell@users.sourceforge.net
+M:	David Brownell <dbrownell@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
 S:	Odd Fixes
 F:	Documentation/usb/ohci.txt
 F:	drivers/usb/host/ohci*
 
 USB OPTION-CARD DRIVER
-P:	Matthias Urlichs
-M:	smurf@smurf.noris.de
+M:	Matthias Urlichs <smurf@smurf.noris.de>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/serial/option.c
 
 USB OV511 DRIVER
-P:	Mark McClelland
-M:	mmcclell@bigfoot.com
+M:	Mark McClelland <mmcclell@bigfoot.com>
 L:	linux-usb@vger.kernel.org
 W:	http://alpha.dyndns.org/ov511/
 S:	Maintained
 F:	drivers/media/video/ov511.*
 
 USB PEGASUS DRIVER
-P:	Petko Manolov
-M:	petkan@users.sourceforge.net
+M:	Petko Manolov <petkan@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
 L:	netdev@vger.kernel.org
 W:	http://pegasus2.sourceforge.net/
@@ -6067,15 +5213,13 @@ S:	Maintained
 F:	drivers/net/usb/pegasus.*
 
 USB PRINTER DRIVER (usblp)
-P:	Pete Zaitcev
-M:	zaitcev@redhat.com
+M:	Pete Zaitcev <zaitcev@redhat.com>
 L:	linux-usb@vger.kernel.org
 S:	Supported
 F:	drivers/usb/class/usblp.c
 
 USB RTL8150 DRIVER
-P:	Petko Manolov
-M:	petkan@users.sourceforge.net
+M:	Petko Manolov <petkan@users.sourceforge.net>
 L:	linux-usb@vger.kernel.org
 L:	netdev@vger.kernel.org
 W:	http://pegasus2.sourceforge.net/
@@ -6083,8 +5227,7 @@ S:	Maintained
 F:	drivers/net/usb/rtl8150.c
 
 USB SE401 DRIVER
-P:	Jeroen Vreeken
-M:	pe1rxq@amsat.org
+M:	Jeroen Vreeken <pe1rxq@amsat.org>
 L:	linux-usb@vger.kernel.org
 W:	http://www.chello.nl/~j.vreeken/se401/
 S:	Maintained
@@ -6092,15 +5235,13 @@ F:	Documentation/video4linux/se401.txt
 F:	drivers/media/video/se401.*
 
 USB SERIAL BELKIN F5U103 DRIVER
-P:	William Greathouse
-M:	wgreathouse@smva.com
+M:	William Greathouse <wgreathouse@smva.com>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/serial/belkin_sa.*
 
 USB SERIAL CYPRESS M8 DRIVER
-P:	Lonnie Mendez
-M:	dignome@gmail.com
+M:	Lonnie Mendez <dignome@gmail.com>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 W:	http://geocities.com/i0xox0i
@@ -6108,23 +5249,20 @@ W:	http://firstlight.net/cvs
 F:	drivers/usb/serial/cypress_m8.*
 
 USB SERIAL CYBERJACK DRIVER
-P:	Matthias Bruestle and Harald Welte
-M:	support@reiner-sct.com
+M:	Matthias Bruestle and Harald Welte <support@reiner-sct.com>
 W:	http://www.reiner-sct.de/support/treiber_cyberjack.php
 S:	Maintained
 F:	drivers/usb/serial/cyberjack.c
 
 USB SERIAL DIGI ACCELEPORT DRIVER
-P:	Peter Berger and Al Borchers
-M:	pberger@brimson.com
-M:	alborchers@steinerpoint.com
+M:	Peter Berger <pberger@brimson.com>
+M:	Al Borchers <alborchers@steinerpoint.com>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/serial/digi_acceleport.c
 
 USB SERIAL DRIVER
-P:	Greg Kroah-Hartman
-M:	gregkh@suse.de
+M:	Greg Kroah-Hartman <gregkh@suse.de>
 L:	linux-usb@vger.kernel.org
 S:	Supported
 F:	Documentation/usb/usb-serial.txt
@@ -6133,38 +5271,33 @@ F:	drivers/usb/serial/usb-serial.c
 F:	include/linux/usb/serial.h
 
 USB SERIAL EMPEG EMPEG-CAR MARK I/II DRIVER
-P:	Gary Brubaker
-M:	xavyer@ix.netcom.com
+M:	Gary Brubaker <xavyer@ix.netcom.com>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/serial/empeg.c
 
 USB SERIAL KEYSPAN DRIVER
-P:	Greg Kroah-Hartman
-M:	greg@kroah.com
+M:	Greg Kroah-Hartman <greg@kroah.com>
 L:	linux-usb@vger.kernel.org
 W:	http://www.kroah.com/linux/
 S:	Maintained
 F:	drivers/usb/serial/*keyspan*
 
 USB SERIAL WHITEHEAT DRIVER
-P:	Support Department
-M:	support@connecttech.com
+M:	Support Department <support@connecttech.com>
 L:	linux-usb@vger.kernel.org
 W:	http://www.connecttech.com
 S:	Supported
 F:	drivers/usb/serial/whiteheat*
 
 USB SMSC95XX ETHERNET DRIVER
-P:	Steve Glendinning
-M:	steve.glendinning@smsc.com
+M:	Steve Glendinning <steve.glendinning@smsc.com>
 L:	netdev@vger.kernel.org
 S:	Supported
 F:	drivers/net/usb/smsc95xx.*
 
 USB SN9C1xx DRIVER
-P:	Luca Risolia
-M:	luca.risolia@studio.unibo.it
+M:	Luca Risolia <luca.risolia@studio.unibo.it>
 L:	linux-usb@vger.kernel.org
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6174,8 +5307,7 @@ F:	Documentation/video4linux/sn9c102.txt
 F:	drivers/media/video/sn9c102/
 
 USB SUBSYSTEM
-P:	Greg Kroah-Hartman
-M:	gregkh@suse.de
+M:	Greg Kroah-Hartman <gregkh@suse.de>
 L:	linux-usb@vger.kernel.org
 W:	http://www.linux-usb.org
 T:	quilt kernel.org/pub/linux/kernel/people/gregkh/gregkh-2.6/
@@ -6187,15 +5319,13 @@ F:	include/linux/usb.h
 F:	include/linux/usb/
 
 USB UHCI DRIVER
-P:	Alan Stern
-M:	stern@rowland.harvard.edu
+M:	Alan Stern <stern@rowland.harvard.edu>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	drivers/usb/host/uhci*
 
 USB "USBNET" DRIVER FRAMEWORK
-P:	David Brownell
-M:	dbrownell@users.sourceforge.net
+M:	David Brownell <dbrownell@users.sourceforge.net>
 L:	netdev@vger.kernel.org
 W:	http://www.linux-usb.org/usbnet
 S:	Maintained
@@ -6203,8 +5333,7 @@ F:	drivers/net/usb/usbnet.c
 F:	include/linux/usb/usbnet.h
 
 USB VIDEO CLASS
-P:	Laurent Pinchart
-M:	laurent.pinchart@skynet.be
+M:	Laurent Pinchart <laurent.pinchart@skynet.be>
 L:	linux-uvc-devel@lists.berlios.de (subscribers-only)
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6213,8 +5342,7 @@ S:	Maintained
 F:	drivers/media/video/uvc/
 
 USB W996[87]CF DRIVER
-P:	Luca Risolia
-M:	luca.risolia@studio.unibo.it
+M:	Luca Risolia <luca.risolia@studio.unibo.it>
 L:	linux-usb@vger.kernel.org
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6224,21 +5352,18 @@ F:	Documentation/video4linux/w9968cf.txt
 F:	drivers/media/video/w996*
 
 USB WIRELESS RNDIS DRIVER (rndis_wlan)
-P:	Jussi Kivilinna
-M:	jussi.kivilinna@mbnet.fi
+M:	Jussi Kivilinna <jussi.kivilinna@mbnet.fi>
 L:	linux-wireless@vger.kernel.org
 S:	Maintained
 F:	drivers/net/wireless/rndis_wlan.c
 
 USB XHCI DRIVER
-P:	Sarah Sharp
-M:	sarah.a.sharp@intel.com
+M:	Sarah Sharp <sarah.a.sharp@intel.com>
 L:	linux-usb@vger.kernel.org
 S:	Supported
 
 USB ZC0301 DRIVER
-P:	Luca Risolia
-M:	luca.risolia@studio.unibo.it
+M:	Luca Risolia <luca.risolia@studio.unibo.it>
 L:	linux-usb@vger.kernel.org
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6248,16 +5373,14 @@ F:	Documentation/video4linux/zc0301.txt
 F:	drivers/media/video/zc0301/
 
 USB ZD1201 DRIVER
-P:	Jeroen Vreeken
-M:	pe1rxq@amsat.org
+M:	Jeroen Vreeken <pe1rxq@amsat.org>
 L:	linux-usb@vger.kernel.org
 W:	http://linux-lc100020.sourceforge.net
 S:	Maintained
 F:	drivers/net/wireless/zd1201.*
 
 USB ZR364XX DRIVER
-P:	Antoine Jacquet
-M:	royale@zerezo.com
+M:	Antoine Jacquet <royale@zerezo.com>
 L:	linux-usb@vger.kernel.org
 L:	linux-media@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-2.6.git
@@ -6267,8 +5390,7 @@ F:	Documentation/video4linux/zr364xx.txt
 F:	drivers/media/video/zr364xx.c
 
 USER-MODE LINUX (UML)
-P:	Jeff Dike
-M:	jdike@addtoit.com
+M:	Jeff Dike <jdike@addtoit.com>
 L:	user-mode-linux-devel@lists.sourceforge.net
 L:	user-mode-linux-user@lists.sourceforge.net
 W:	http://user-mode-linux.sourceforge.net
@@ -6279,26 +5401,22 @@ F:	fs/hostfs/
 F:	fs/hppfs/
 
 USERSPACE I/O (UIO)
-P:	Hans J. Koch
-M:	hjk@linutronix.de
-P:	Greg Kroah-Hartman
-M:	gregkh@suse.de
+M:	"Hans J. Koch" <hjk@linutronix.de>
+M:	Greg Kroah-Hartman <gregkh@suse.de>
 S:	Maintained
 F:	Documentation/DocBook/uio-howto.tmpl
 F:	drivers/uio/
 F:	include/linux/uio*.h
 
 UTIL-LINUX-NG PACKAGE
-P:	Karel Zak
-M:	kzak@redhat.com
+M:	Karel Zak <kzak@redhat.com>
 L:	util-linux-ng@vger.kernel.org
 W:	http://kernel.org/~kzak/util-linux-ng/
 T:	git git://git.kernel.org/pub/scm/utils/util-linux-ng/util-linux-ng.git
 S:	Maintained
 
 UVESAFB DRIVER
-P:	Michal Januszewski
-M:	spock@gentoo.org
+M:	Michal Januszewski <spock@gentoo.org>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 W:	http://dev.gentoo.org/~spock/projects/uvesafb/
 S:	Maintained
@@ -6306,53 +5424,44 @@ F:	Documentation/fb/uvesafb.txt
 F:	drivers/video/uvesafb.*
 
 VFAT/FAT/MSDOS FILESYSTEM
-P:	OGAWA Hirofumi
-M:	hirofumi@mail.parknet.co.jp
+M:	OGAWA Hirofumi <hirofumi@mail.parknet.co.jp>
 S:	Maintained
 F:	Documentation/filesystems/vfat.txt
 F:	fs/fat/
 
 VIA RHINE NETWORK DRIVER
-P:	Roger Luethi
-M:	rl@hellgate.ch
+M:	Roger Luethi <rl@hellgate.ch>
 S:	Maintained
 F:	drivers/net/via-rhine.c
 
 VIAPRO SMBUS DRIVER
-P:	Jean Delvare
-M:	khali@linux-fr.org
+M:	Jean Delvare <khali@linux-fr.org>
 L:	linux-i2c@vger.kernel.org
 S:	Maintained
 F:	Documentation/i2c/busses/i2c-viapro
 F:	drivers/i2c/busses/i2c-viapro.c
 
 VIA SD/MMC CARD CONTROLLER DRIVER
-P:	Joseph Chan
-M:	JosephChan@via.com.tw
-P:	Harald Welte
-M:	HaraldWelte@viatech.com
+M:	Joseph Chan <JosephChan@via.com.tw>
+M:	Harald Welte <HaraldWelte@viatech.com>
 S:	Maintained
 F:	drivers/mmc/host/via-sdmmc.c
 
 VIA UNICHROME(PRO)/CHROME9 FRAMEBUFFER DRIVER
-P:	Joseph Chan
-M:	JosephChan@via.com.tw
-P:	Scott Fang
-M:	ScottFang@viatech.com.cn
+M:	Joseph Chan <JosephChan@via.com.tw>
+M:	Scott Fang <ScottFang@viatech.com.cn>
 L:	linux-fbdev-devel@lists.sourceforge.net (moderated for non-subscribers)
 S:	Maintained
 F:	drivers/video/via/
 
 VIA VELOCITY NETWORK DRIVER
-P:	Francois Romieu
-M:	romieu@fr.zoreil.com
+M:	Francois Romieu <romieu@fr.zoreil.com>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/via-velocity.*
 
 VLAN (802.1Q)
-P:	Patrick McHardy
-M:	kaber@trash.net
+M:	Patrick McHardy <kaber@trash.net>
 L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/macvlan.c
@@ -6360,18 +5469,15 @@ F:	include/linux/if_*vlan.h
 F:	net/8021q/
 
 VLYNQ BUS
-P:	Florian Fainelli
-M:	florian@openwrt.org
+M:	Florian Fainelli <florian@openwrt.org>
 L:	openwrt-devel@lists.openwrt.org
 S:	Maintained
 F:	drivers/vlynq/vlynq.c
 F:	include/linux/vlynq.h
 
 VOLTAGE AND CURRENT REGULATOR FRAMEWORK
-P:	Liam Girdwood
-M:	lrg@slimlogic.co.uk
-P:	Mark Brown
-M:	broonie@opensource.wolfsonmicro.com
+M:	Liam Girdwood <lrg@slimlogic.co.uk>
+M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
 W:	http://opensource.wolfsonmicro.com/node/15
 W:	http://www.slimlogic.co.uk/?p=48
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/lrg/voltage-2.6.git
@@ -6380,52 +5486,45 @@ F:	drivers/regulator/
 F:	include/linux/regulator/
 
 VT1211 HARDWARE MONITOR DRIVER
-P:	Juerg Haefliger
-M:	juergh@gmail.com
+M:	Juerg Haefliger <juergh@gmail.com>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/vt1211
 F:	drivers/hwmon/vt1211.c
 
 VT8231 HARDWARE MONITOR DRIVER
-P:	Roger Lucas
-M:	vt8231@hiddenengine.co.uk
+M:	Roger Lucas <vt8231@hiddenengine.co.uk>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	drivers/hwmon/vt8231.c
 
 W1 DALLAS'S 1-WIRE BUS
-P:	Evgeniy Polyakov
-M:	johnpol@2ka.mipt.ru
+M:	Evgeniy Polyakov <johnpol@2ka.mipt.ru>
 S:	Maintained
 F:	Documentation/w1/
 F:	drivers/w1/
 
 W83791D HARDWARE MONITORING DRIVER
-P:	Marc Hulsman
-M:	m.hulsman@tudelft.nl
+M:	Marc Hulsman <m.hulsman@tudelft.nl>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/w83791d
 F:	drivers/hwmon/w83791d.c
 
 W83793 HARDWARE MONITORING DRIVER
-P:	Rudolf Marek
-M:	r.marek@assembler.cz
+M:	Rudolf Marek <r.marek@assembler.cz>
 L:	lm-sensors@lm-sensors.org
 S:	Maintained
 F:	Documentation/hwmon/w83793
 F:	drivers/hwmon/w83793.c
 
 W83L51xD SD/MMC CARD INTERFACE DRIVER
-P:	Pierre Ossman
-M:	pierre@ossman.eu
+M:	Pierre Ossman <pierre@ossman.eu>
 S:	Maintained
 F:	drivers/mmc/host/wbsd.*
 
 WATCHDOG DEVICE DRIVERS
-P:	Wim Van Sebroeck
-M:	wim@iguana.be
+M:	Wim Van Sebroeck <wim@iguana.be>
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog.git
 S:	Maintained
 F:	Documentation/watchdog/
@@ -6433,8 +5532,7 @@ F:	drivers/watchdog/
 F:	include/linux/watchdog.h
 
 WAVELAN NETWORK DRIVER & WIRELESS EXTENSIONS
-P:	Jean Tourrilhes
-M:	jt@hpl.hp.com
+M:	Jean Tourrilhes <jt@hpl.hp.com>
 L:	linux-wireless@vger.kernel.org
 W:	http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/
 S:	Maintained
@@ -6442,46 +5540,39 @@ F:	Documentation/networking/wavelan.txt
 F:	drivers/net/wireless/wavelan*
 
 WD7000 SCSI DRIVER
-P:	Miroslav Zagorac
-M:	zaga@fly.cc.fer.hr
+M:	Miroslav Zagorac <zaga@fly.cc.fer.hr>
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 F:	drivers/scsi/wd7000.c
 
 WIMAX STACK
-P:	Inaky Perez-Gonzalez
-M:	inaky.perez-gonzalez@intel.com
+M:	Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
 M:	linux-wimax@intel.com
 L:	wimax@linuxwimax.org
 S:	Supported
 W:	http://linuxwimax.org
 
 WIMEDIA LLC PROTOCOL (WLP) SUBSYSTEM
-P:	David Vrabel
-M:	david.vrabel@csr.com
+M:	David Vrabel <david.vrabel@csr.com>
 S:	Maintained
 F:	include/linux/wlp.h
 F:	drivers/uwb/wlp/
 
 WISTRON LAPTOP BUTTON DRIVER
-P:	Miloslav Trmac
-M:	mitr@volny.cz
+M:	Miloslav Trmac <mitr@volny.cz>
 S:	Maintained
 F:	drivers/input/misc/wistron_btns.c
 
 WL3501 WIRELESS PCMCIA CARD DRIVER
-P:	Arnaldo Carvalho de Melo
-M:	acme@ghostprotocols.net
+M:	Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
 L:	linux-wireless@vger.kernel.org
 W:	http://oops.ghostprotocols.net:81/blog
 S:	Maintained
 F:	drivers/net/wireless/wl3501*
 
 WM97XX TOUCHSCREEN DRIVERS
-P:	Mark Brown
-M:	broonie@opensource.wolfsonmicro.com
-P:	Liam Girdwood
-M:	lrg@slimlogic.co.uk
+M:	Mark Brown <broonie@opensource.wolfsonmicro.com>
+M:	Liam Girdwood <lrg@slimlogic.co.uk>
 L:	linux-input@vger.kernel.org
 T:	git git://opensource.wolfsonmicro.com/linux-2.6-touch
 W:	http://opensource.wolfsonmicro.com/node/7
@@ -6490,8 +5581,7 @@ F:	drivers/input/touchscreen/*wm97*
 F:	include/linux/wm97xx.h
 
 X.25 NETWORK LAYER
-P:	Henner Eisen
-M:	eis@baty.hanse.de
+M:	Henner Eisen <eis@baty.hanse.de>
 L:	linux-x25@vger.kernel.org
 S:	Maintained
 F:	Documentation/networking/x25*
@@ -6499,12 +5589,9 @@ F:	include/net/x25*
 F:	net/x25/
 
 X86 ARCHITECTURE (32-BIT AND 64-BIT)
-P:	Thomas Gleixner
-M:	tglx@linutronix.de
-P:	Ingo Molnar
-M:	mingo@redhat.com
-P:	H. Peter Anvin
-M:	hpa@zytor.com
+M:	Thomas Gleixner <tglx@linutronix.de>
+M:	Ingo Molnar <mingo@redhat.com>
+M:	"H. Peter Anvin" <hpa@zytor.com>
 M:	x86@kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/x86/linux-2.6-x86.git
 S:	Maintained
@@ -6512,10 +5599,8 @@ F:	Documentation/x86/
 F:	arch/x86/
 
 XEN HYPERVISOR INTERFACE
-P:	Jeremy Fitzhardinge
-M:	jeremy@xensource.com
-P:	Chris Wright
-M:	chrisw@sous-sol.org
+M:	Jeremy Fitzhardinge <jeremy@xensource.com>
+M:	Chris Wright <chrisw@sous-sol.org>
 L:	virtualization@lists.osdl.org
 L:	xen-devel@lists.xensource.com
 S:	Supported
@@ -6527,8 +5612,7 @@ F:	include/xen/
 
 XFS FILESYSTEM
 P:	Silicon Graphics Inc
-P:	Felix Blyakher
-M:	felixb@sgi.com
+M:	Felix Blyakher <felixb@sgi.com>
 M:	xfs-masters@oss.sgi.com
 L:	xfs@oss.sgi.com
 W:	http://oss.sgi.com/projects/xfs
@@ -6538,38 +5622,33 @@ F:	Documentation/filesystems/xfs.txt
 F:	fs/xfs/
 
 XILINX SYSTEMACE DRIVER
-P:	Grant Likely
-M:	grant.likely@secretlab.ca
+M:	Grant Likely <grant.likely@secretlab.ca>
 W:	http://www.secretlab.ca/
 S:	Maintained
 F:	drivers/block/xsysace.c
 
 XILINX UARTLITE SERIAL DRIVER
-P:	Peter Korsgaard
-M:	jacmet@sunsite.dk
+M:	Peter Korsgaard <jacmet@sunsite.dk>
 L:	linux-serial@vger.kernel.org
 S:	Maintained
 F:	drivers/serial/uartlite.c
 
 YAM DRIVER FOR AX.25
-P:	Jean-Paul Roubelat
-M:	jpr@f6fbb.org
+M:	Jean-Paul Roubelat <jpr@f6fbb.org>
 L:	linux-hams@vger.kernel.org
 S:	Maintained
 F:	drivers/net/hamradio/yam*
 F:	include/linux/yam.h
 
 YEALINK PHONE DRIVER
-P:	Henk Vergonet
-M:	Henk.Vergonet@gmail.com
+M:	Henk Vergonet <Henk.Vergonet@gmail.com>
 L:	usbb2k-api-dev@nongnu.org
 S:	Maintained
 F:	Documentation/input/yealink.txt
 F:	drivers/input/misc/yealink.*
 
 Z8530 DRIVER FOR AX.25
-P:	Joerg Reuter
-M:	jreuter@yaina.de
+M:	Joerg Reuter <jreuter@yaina.de>
 W:	http://yaina.de/jreuter/
 W:	http://www.qsl.net/dl1bke/
 L:	linux-hams@vger.kernel.org
@@ -6579,10 +5658,8 @@ F:	drivers/net/hamradio/*scc.c
 F:	drivers/net/hamradio/z8530.h
 
 ZD1211RW WIRELESS DRIVER
-P:	Daniel Drake
-M:	dsd@gentoo.org
-P:	Ulrich Kunitz
-M:	kune@deine-taler.de
+M:	Daniel Drake <dsd@gentoo.org>
+M:	Ulrich Kunitz <kune@deine-taler.de>
 W:	http://zd1211.ath.cx/wiki/DriverRewrite
 L:	linux-wireless@vger.kernel.org
 L:	zd1211-devs@lists.sourceforge.net (subscribers-only)
@@ -6598,14 +5675,12 @@ S:	Odd Fixes
 F:	drivers/media/video/zoran/
 
 ZS DECSTATION Z85C30 SERIAL DRIVER
-P:	Maciej W. Rozycki
-M:	macro@linux-mips.org
+M:	"Maciej W. Rozycki" <macro@linux-mips.org>
 S:	Maintained
 F:	drivers/serial/zs.*
 
 THE REST
-P:	Linus Torvalds
-M:	torvalds@linux-foundation.org
+M:	Linus Torvalds <torvalds@linux-foundation.org>
 L:	linux-kernel@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git
 S:	Buried alive in reporters
diff --git a/Makefile b/Makefile
index 063d738..0d46615 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 31
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = Man-Eating Seals of Antiquity
 
 # *DOCUMENTATION*
diff --git a/arch/alpha/include/asm/tlb.h b/arch/alpha/include/asm/tlb.h
index c136365..4286675 100644
--- a/arch/alpha/include/asm/tlb.h
+++ b/arch/alpha/include/asm/tlb.h
@@ -9,7 +9,7 @@
 
 #include <asm-generic/tlb.h>
 
-#define __pte_free_tlb(tlb, pte)			pte_free((tlb)->mm, pte)
-#define __pmd_free_tlb(tlb, pmd)			pmd_free((tlb)->mm, pmd)
+#define __pte_free_tlb(tlb, pte, address)		pte_free((tlb)->mm, pte)
+#define __pmd_free_tlb(tlb, pmd, address)		pmd_free((tlb)->mm, pmd)
  
 #endif
diff --git a/arch/arm/include/asm/tlb.h b/arch/arm/include/asm/tlb.h
index 321c83e..f41a6f5 100644
--- a/arch/arm/include/asm/tlb.h
+++ b/arch/arm/include/asm/tlb.h
@@ -102,8 +102,8 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 }
 
 #define tlb_remove_page(tlb,page)	free_page_and_swap_cache(page)
-#define pte_free_tlb(tlb, ptep)		pte_free((tlb)->mm, ptep)
-#define pmd_free_tlb(tlb, pmdp)		pmd_free((tlb)->mm, pmdp)
+#define pte_free_tlb(tlb, ptep, addr)	pte_free((tlb)->mm, ptep)
+#define pmd_free_tlb(tlb, pmdp, addr)	pmd_free((tlb)->mm, pmdp)
 
 #define tlb_migrate_finish(mm)		do { } while (0)
 
diff --git a/arch/arm/mach-at91/include/mach/at_hdmac.h b/arch/arm/mach-at91/include/mach/at_hdmac.h
new file mode 100644
index 0000000..187cb58
--- /dev/null
+++ b/arch/arm/mach-at91/include/mach/at_hdmac.h
@@ -0,0 +1,102 @@
+/*
+ * Header file for the Atmel AHB DMA Controller driver
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT_HDMAC_H
+#define AT_HDMAC_H
+
+#include <linux/dmaengine.h>
+
+/**
+ * struct at_dma_platform_data - Controller configuration parameters
+ * @nr_channels: Number of channels supported by hardware (max 8)
+ * @cap_mask: dma_capability flags supported by the platform
+ */
+struct at_dma_platform_data {
+	unsigned int	nr_channels;
+	dma_cap_mask_t  cap_mask;
+};
+
+/**
+ * enum at_dma_slave_width - DMA slave register access width.
+ * @AT_DMA_SLAVE_WIDTH_8BIT: Do 8-bit slave register accesses
+ * @AT_DMA_SLAVE_WIDTH_16BIT: Do 16-bit slave register accesses
+ * @AT_DMA_SLAVE_WIDTH_32BIT: Do 32-bit slave register accesses
+ */
+enum at_dma_slave_width {
+	AT_DMA_SLAVE_WIDTH_8BIT = 0,
+	AT_DMA_SLAVE_WIDTH_16BIT,
+	AT_DMA_SLAVE_WIDTH_32BIT,
+};
+
+/**
+ * struct at_dma_slave - Controller-specific information about a slave
+ * @dma_dev: required DMA master device
+ * @tx_reg: physical address of data register used for
+ *	memory-to-peripheral transfers
+ * @rx_reg: physical address of data register used for
+ *	peripheral-to-memory transfers
+ * @reg_width: peripheral register width
+ * @cfg: Platform-specific initializer for the CFG register
+ * @ctrla: Platform-specific initializer for the CTRLA register
+ */
+struct at_dma_slave {
+	struct device		*dma_dev;
+	dma_addr_t		tx_reg;
+	dma_addr_t		rx_reg;
+	enum at_dma_slave_width	reg_width;
+	u32			cfg;
+	u32			ctrla;
+};
+
+
+/* Platform-configurable bits in CFG */
+#define	ATC_SRC_PER(h)		(0xFU & (h))	/* Channel src rq associated with periph handshaking ifc h */
+#define	ATC_DST_PER(h)		((0xFU & (h)) <<  4)	/* Channel dst rq associated with periph handshaking ifc h */
+#define	ATC_SRC_REP		(0x1 <<  8)	/* Source Replay Mod */
+#define	ATC_SRC_H2SEL		(0x1 <<  9)	/* Source Handshaking Mod */
+#define		ATC_SRC_H2SEL_SW	(0x0 <<  9)
+#define		ATC_SRC_H2SEL_HW	(0x1 <<  9)
+#define	ATC_DST_REP		(0x1 << 12)	/* Destination Replay Mod */
+#define	ATC_DST_H2SEL		(0x1 << 13)	/* Destination Handshaking Mod */
+#define		ATC_DST_H2SEL_SW	(0x0 << 13)
+#define		ATC_DST_H2SEL_HW	(0x1 << 13)
+#define	ATC_SOD			(0x1 << 16)	/* Stop On Done */
+#define	ATC_LOCK_IF		(0x1 << 20)	/* Interface Lock */
+#define	ATC_LOCK_B		(0x1 << 21)	/* AHB Bus Lock */
+#define	ATC_LOCK_IF_L		(0x1 << 22)	/* Master Interface Arbiter Lock */
+#define		ATC_LOCK_IF_L_CHUNK	(0x0 << 22)
+#define		ATC_LOCK_IF_L_BUFFER	(0x1 << 22)
+#define	ATC_AHB_PROT_MASK	(0x7 << 24)	/* AHB Protection */
+#define	ATC_FIFOCFG_MASK	(0x3 << 28)	/* FIFO Request Configuration */
+#define		ATC_FIFOCFG_LARGESTBURST	(0x0 << 28)
+#define		ATC_FIFOCFG_HALFFIFO		(0x1 << 28)
+#define		ATC_FIFOCFG_ENOUGHSPACE		(0x2 << 28)
+
+/* Platform-configurable bits in CTRLA */
+#define	ATC_SCSIZE_MASK		(0x7 << 16)	/* Source Chunk Transfer Size */
+#define		ATC_SCSIZE_1		(0x0 << 16)
+#define		ATC_SCSIZE_4		(0x1 << 16)
+#define		ATC_SCSIZE_8		(0x2 << 16)
+#define		ATC_SCSIZE_16		(0x3 << 16)
+#define		ATC_SCSIZE_32		(0x4 << 16)
+#define		ATC_SCSIZE_64		(0x5 << 16)
+#define		ATC_SCSIZE_128		(0x6 << 16)
+#define		ATC_SCSIZE_256		(0x7 << 16)
+#define	ATC_DCSIZE_MASK		(0x7 << 20)	/* Destination Chunk Transfer Size */
+#define		ATC_DCSIZE_1		(0x0 << 20)
+#define		ATC_DCSIZE_4		(0x1 << 20)
+#define		ATC_DCSIZE_8		(0x2 << 20)
+#define		ATC_DCSIZE_16		(0x3 << 20)
+#define		ATC_DCSIZE_32		(0x4 << 20)
+#define		ATC_DCSIZE_64		(0x5 << 20)
+#define		ATC_DCSIZE_128		(0x6 << 20)
+#define		ATC_DCSIZE_256		(0x7 << 20)
+
+#endif /* AT_HDMAC_H */
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index dff5528..e26af83 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -51,6 +51,7 @@
 
 #define OVERO_GPIO_BT_XGATE	15
 #define OVERO_GPIO_W2W_NRESET	16
+#define OVERO_GPIO_PENDOWN	114
 #define OVERO_GPIO_BT_NRESET	164
 #define OVERO_GPIO_USBH_CPEN	168
 #define OVERO_GPIO_USBH_NRESET	183
diff --git a/arch/arm/mach-omap2/cm.h b/arch/arm/mach-omap2/cm.h
index 1d3c93b..f3c91a1 100644
--- a/arch/arm/mach-omap2/cm.h
+++ b/arch/arm/mach-omap2/cm.h
@@ -29,9 +29,9 @@
  * These registers appear once per CM module.
  */
 
-#define OMAP3430_CM_REVISION		OMAP_CM_REGADDR(OCP_MOD, 0x0000)
-#define OMAP3430_CM_SYSCONFIG		OMAP_CM_REGADDR(OCP_MOD, 0x0010)
-#define OMAP3430_CM_POLCTRL		OMAP_CM_REGADDR(OCP_MOD, 0x009c)
+#define OMAP3430_CM_REVISION		OMAP34XX_CM_REGADDR(OCP_MOD, 0x0000)
+#define OMAP3430_CM_SYSCONFIG		OMAP34XX_CM_REGADDR(OCP_MOD, 0x0010)
+#define OMAP3430_CM_POLCTRL		OMAP34XX_CM_REGADDR(OCP_MOD, 0x009c)
 
 #define OMAP3_CM_CLKOUT_CTRL_OFFSET	0x0070
 #define OMAP3430_CM_CLKOUT_CTRL		OMAP_CM_REGADDR(OMAP3430_CCR_MOD, 0x0070)
diff --git a/arch/arm/mach-omap2/pm.h b/arch/arm/mach-omap2/pm.h
index f7b3baf..21201cd 100644
--- a/arch/arm/mach-omap2/pm.h
+++ b/arch/arm/mach-omap2/pm.h
@@ -11,9 +11,6 @@
 #ifndef __ARCH_ARM_MACH_OMAP2_PM_H
 #define __ARCH_ARM_MACH_OMAP2_PM_H
 
-extern int omap2_pm_init(void);
-extern int omap3_pm_init(void);
-
 #ifdef CONFIG_PM_DEBUG
 extern void omap2_pm_dump(int mode, int resume, unsigned int us);
 extern int omap2_pm_debug;
diff --git a/arch/arm/mach-omap2/pm24xx.c b/arch/arm/mach-omap2/pm24xx.c
index db10255..528dbdc 100644
--- a/arch/arm/mach-omap2/pm24xx.c
+++ b/arch/arm/mach-omap2/pm24xx.c
@@ -470,7 +470,7 @@ static void __init prcm_setup_regs(void)
 			  WKUP_MOD, PM_WKEN);
 }
 
-int __init omap2_pm_init(void)
+static int __init omap2_pm_init(void)
 {
 	u32 l;
 
diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c
index 841d4c5..488d595 100644
--- a/arch/arm/mach-omap2/pm34xx.c
+++ b/arch/arm/mach-omap2/pm34xx.c
@@ -39,7 +39,9 @@
 struct power_state {
 	struct powerdomain *pwrdm;
 	u32 next_state;
+#ifdef CONFIG_SUSPEND
 	u32 saved_state;
+#endif
 	struct list_head node;
 };
 
@@ -293,6 +295,9 @@ out:
 	local_irq_enable();
 }
 
+#ifdef CONFIG_SUSPEND
+static suspend_state_t suspend_state;
+
 static int omap3_pm_prepare(void)
 {
 	disable_hlt();
@@ -321,7 +326,6 @@ static int omap3_pm_suspend(void)
 restore:
 	/* Restore next_pwrsts */
 	list_for_each_entry(pwrst, &pwrst_list, node) {
-		set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
 		state = pwrdm_read_prev_pwrst(pwrst->pwrdm);
 		if (state > pwrst->next_state) {
 			printk(KERN_INFO "Powerdomain (%s) didn't enter "
@@ -329,6 +333,7 @@ restore:
 			       pwrst->pwrdm->name, pwrst->next_state);
 			ret = -1;
 		}
+		set_pwrdm_state(pwrst->pwrdm, pwrst->saved_state);
 	}
 	if (ret)
 		printk(KERN_ERR "Could not enter target state in pm_suspend\n");
@@ -339,11 +344,11 @@ restore:
 	return ret;
 }
 
-static int omap3_pm_enter(suspend_state_t state)
+static int omap3_pm_enter(suspend_state_t unused)
 {
 	int ret = 0;
 
-	switch (state) {
+	switch (suspend_state) {
 	case PM_SUSPEND_STANDBY:
 	case PM_SUSPEND_MEM:
 		ret = omap3_pm_suspend();
@@ -360,12 +365,30 @@ static void omap3_pm_finish(void)
 	enable_hlt();
 }
 
+/* Hooks to enable / disable UART interrupts during suspend */
+static int omap3_pm_begin(suspend_state_t state)
+{
+	suspend_state = state;
+	omap_uart_enable_irqs(0);
+	return 0;
+}
+
+static void omap3_pm_end(void)
+{
+	suspend_state = PM_SUSPEND_ON;
+	omap_uart_enable_irqs(1);
+	return;
+}
+
 static struct platform_suspend_ops omap_pm_ops = {
+	.begin		= omap3_pm_begin,
+	.end		= omap3_pm_end,
 	.prepare	= omap3_pm_prepare,
 	.enter		= omap3_pm_enter,
 	.finish		= omap3_pm_finish,
 	.valid		= suspend_valid_only_mem,
 };
+#endif /* CONFIG_SUSPEND */
 
 
 /**
@@ -613,6 +636,24 @@ static void __init prcm_setup_regs(void)
 	/* Clear any pending PRCM interrupts */
 	prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
 
+	/* Don't attach IVA interrupts */
+	prm_write_mod_reg(0, WKUP_MOD, OMAP3430_PM_IVAGRPSEL);
+	prm_write_mod_reg(0, CORE_MOD, OMAP3430_PM_IVAGRPSEL1);
+	prm_write_mod_reg(0, CORE_MOD, OMAP3430ES2_PM_IVAGRPSEL3);
+	prm_write_mod_reg(0, OMAP3430_PER_MOD, OMAP3430_PM_IVAGRPSEL);
+
+	/* Clear any pending 'reset' flags */
+	prm_write_mod_reg(0xffffffff, MPU_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, CORE_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_PER_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_EMU_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_NEON_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430_DSS_MOD, RM_RSTST);
+	prm_write_mod_reg(0xffffffff, OMAP3430ES2_USBHOST_MOD, RM_RSTST);
+
+	/* Clear any pending PRCM interrupts */
+	prm_write_mod_reg(0, OCP_MOD, OMAP3_PRM_IRQSTATUS_MPU_OFFSET);
+
 	omap3_iva_idle();
 	omap3_d2d_idle();
 }
@@ -652,7 +693,7 @@ static int __init clkdms_setup(struct clockdomain *clkdm)
 	return 0;
 }
 
-int __init omap3_pm_init(void)
+static int __init omap3_pm_init(void)
 {
 	struct power_state *pwrst, *tmp;
 	int ret;
@@ -692,7 +733,9 @@ int __init omap3_pm_init(void)
 	_omap_sram_idle = omap_sram_push(omap34xx_cpu_suspend,
 					 omap34xx_cpu_suspend_sz);
 
+#ifdef CONFIG_SUSPEND
 	suspend_set_ops(&omap_pm_ops);
+#endif /* CONFIG_SUSPEND */
 
 	pm_idle = omap3_pm_idle;
 
diff --git a/arch/arm/mach-omap2/serial.c b/arch/arm/mach-omap2/serial.c
index c0bea75..ce22344 100644
--- a/arch/arm/mach-omap2/serial.c
+++ b/arch/arm/mach-omap2/serial.c
@@ -54,6 +54,7 @@ struct omap_uart_state {
 
 	struct plat_serial8250_port *p;
 	struct list_head node;
+	struct platform_device pdev;
 
 #if defined(CONFIG_ARCH_OMAP3) && defined(CONFIG_PM)
 	int context_valid;
@@ -68,10 +69,9 @@ struct omap_uart_state {
 #endif
 };
 
-static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS];
 static LIST_HEAD(uart_list);
 
-static struct plat_serial8250_port serial_platform_data[] = {
+static struct plat_serial8250_port serial_platform_data0[] = {
 	{
 		.membase	= IO_ADDRESS(OMAP_UART1_BASE),
 		.mapbase	= OMAP_UART1_BASE,
@@ -81,6 +81,12 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.regshift	= 2,
 		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
+		.flags		= 0
+	}
+};
+
+static struct plat_serial8250_port serial_platform_data1[] = {
+	{
 		.membase	= IO_ADDRESS(OMAP_UART2_BASE),
 		.mapbase	= OMAP_UART2_BASE,
 		.irq		= 73,
@@ -89,6 +95,12 @@ static struct plat_serial8250_port serial_platform_data[] = {
 		.regshift	= 2,
 		.uartclk	= OMAP24XX_BASE_BAUD * 16,
 	}, {
+		.flags		= 0
+	}
+};
+
+static struct plat_serial8250_port serial_platform_data2[] = {
+	{
 		.membase	= IO_ADDRESS(OMAP_UART3_BASE),
 		.mapbase	= OMAP_UART3_BASE,
 		.irq		= 74,
@@ -227,6 +239,40 @@ static inline void omap_uart_disable_clocks(struct omap_uart_state *uart)
 	clk_disable(uart->fck);
 }
 
+static void omap_uart_enable_wakeup(struct omap_uart_state *uart)
+{
+	/* Set wake-enable bit */
+	if (uart->wk_en && uart->wk_mask) {
+		u32 v = __raw_readl(uart->wk_en);
+		v |= uart->wk_mask;
+		__raw_writel(v, uart->wk_en);
+	}
+
+	/* Ensure IOPAD wake-enables are set */
+	if (cpu_is_omap34xx() && uart->padconf) {
+		u16 v = omap_ctrl_readw(uart->padconf);
+		v |= OMAP3_PADCONF_WAKEUPENABLE0;
+		omap_ctrl_writew(v, uart->padconf);
+	}
+}
+
+static void omap_uart_disable_wakeup(struct omap_uart_state *uart)
+{
+	/* Clear wake-enable bit */
+	if (uart->wk_en && uart->wk_mask) {
+		u32 v = __raw_readl(uart->wk_en);
+		v &= ~uart->wk_mask;
+		__raw_writel(v, uart->wk_en);
+	}
+
+	/* Ensure IOPAD wake-enables are cleared */
+	if (cpu_is_omap34xx() && uart->padconf) {
+		u16 v = omap_ctrl_readw(uart->padconf);
+		v &= ~OMAP3_PADCONF_WAKEUPENABLE0;
+		omap_ctrl_writew(v, uart->padconf);
+	}
+}
+
 static void omap_uart_smart_idle_enable(struct omap_uart_state *uart,
 					  int enable)
 {
@@ -256,6 +302,11 @@ static void omap_uart_block_sleep(struct omap_uart_state *uart)
 
 static void omap_uart_allow_sleep(struct omap_uart_state *uart)
 {
+	if (device_may_wakeup(&uart->pdev.dev))
+		omap_uart_enable_wakeup(uart);
+	else
+		omap_uart_disable_wakeup(uart);
+
 	if (!uart->clocked)
 		return;
 
@@ -302,7 +353,6 @@ void omap_uart_resume_idle(int num)
 			/* Check for normal UART wakeup */
 			if (__raw_readl(uart->wk_st) & uart->wk_mask)
 				omap_uart_block_sleep(uart);
-
 			return;
 		}
 	}
@@ -356,16 +406,13 @@ static irqreturn_t omap_uart_interrupt(int irq, void *dev_id)
 	return IRQ_NONE;
 }
 
-static u32 sleep_timeout = DEFAULT_TIMEOUT;
-
 static void omap_uart_idle_init(struct omap_uart_state *uart)
 {
-	u32 v;
 	struct plat_serial8250_port *p = uart->p;
 	int ret;
 
 	uart->can_sleep = 0;
-	uart->timeout = sleep_timeout;
+	uart->timeout = DEFAULT_TIMEOUT;
 	setup_timer(&uart->timer, omap_uart_idle_timer,
 		    (unsigned long) uart);
 	mod_timer(&uart->timer, jiffies + uart->timeout);
@@ -423,76 +470,101 @@ static void omap_uart_idle_init(struct omap_uart_state *uart)
 		uart->padconf = 0;
 	}
 
-	/* Set wake-enable bit */
-	if (uart->wk_en && uart->wk_mask) {
-		v = __raw_readl(uart->wk_en);
-		v |= uart->wk_mask;
-		__raw_writel(v, uart->wk_en);
-	}
-
-	/* Ensure IOPAD wake-enables are set */
-	if (cpu_is_omap34xx() && uart->padconf) {
-		u16 v;
-
-		v = omap_ctrl_readw(uart->padconf);
-		v |= OMAP3_PADCONF_WAKEUPENABLE0;
-		omap_ctrl_writew(v, uart->padconf);
-	}
-
 	p->flags |= UPF_SHARE_IRQ;
 	ret = request_irq(p->irq, omap_uart_interrupt, IRQF_SHARED,
 			  "serial idle", (void *)uart);
 	WARN_ON(ret);
 }
 
-static ssize_t sleep_timeout_show(struct kobject *kobj,
-				  struct kobj_attribute *attr,
+void omap_uart_enable_irqs(int enable)
+{
+	int ret;
+	struct omap_uart_state *uart;
+
+	list_for_each_entry(uart, &uart_list, node) {
+		if (enable)
+			ret = request_irq(uart->p->irq, omap_uart_interrupt,
+				IRQF_SHARED, "serial idle", (void *)uart);
+		else
+			free_irq(uart->p->irq, (void *)uart);
+	}
+}
+
+static ssize_t sleep_timeout_show(struct device *dev,
+				  struct device_attribute *attr,
 				  char *buf)
 {
-	return sprintf(buf, "%u\n", sleep_timeout / HZ);
+	struct platform_device *pdev = container_of(dev,
+					struct platform_device, dev);
+	struct omap_uart_state *uart = container_of(pdev,
+					struct omap_uart_state, pdev);
+
+	return sprintf(buf, "%u\n", uart->timeout / HZ);
 }
 
-static ssize_t sleep_timeout_store(struct kobject *kobj,
-				   struct kobj_attribute *attr,
+static ssize_t sleep_timeout_store(struct device *dev,
+				   struct device_attribute *attr,
 				   const char *buf, size_t n)
 {
-	struct omap_uart_state *uart;
+	struct platform_device *pdev = container_of(dev,
+					struct platform_device, dev);
+	struct omap_uart_state *uart = container_of(pdev,
+					struct omap_uart_state, pdev);
 	unsigned int value;
 
 	if (sscanf(buf, "%u", &value) != 1) {
 		printk(KERN_ERR "sleep_timeout_store: Invalid value\n");
 		return -EINVAL;
 	}
-	sleep_timeout = value * HZ;
-	list_for_each_entry(uart, &uart_list, node) {
-		uart->timeout = sleep_timeout;
-		if (uart->timeout)
-			mod_timer(&uart->timer, jiffies + uart->timeout);
-		else
-			/* A zero value means disable timeout feature */
-			omap_uart_block_sleep(uart);
-	}
+
+	uart->timeout = value * HZ;
+	if (uart->timeout)
+		mod_timer(&uart->timer, jiffies + uart->timeout);
+	else
+		/* A zero value means disable timeout feature */
+		omap_uart_block_sleep(uart);
+
 	return n;
 }
 
-static struct kobj_attribute sleep_timeout_attr =
-	__ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
-
+DEVICE_ATTR(sleep_timeout, 0644, sleep_timeout_show, sleep_timeout_store);
+#define DEV_CREATE_FILE(dev, attr) WARN_ON(device_create_file(dev, attr))
 #else
 static inline void omap_uart_idle_init(struct omap_uart_state *uart) {}
+#define DEV_CREATE_FILE(dev, attr)
 #endif /* CONFIG_PM */
 
-static struct platform_device serial_device = {
-	.name			= "serial8250",
-	.id			= PLAT8250_DEV_PLATFORM,
-	.dev			= {
-		.platform_data	= serial_platform_data,
+static struct omap_uart_state omap_uart[OMAP_MAX_NR_PORTS] = {
+	{
+		.pdev = {
+			.name			= "serial8250",
+			.id			= PLAT8250_DEV_PLATFORM,
+			.dev			= {
+				.platform_data	= serial_platform_data0,
+			},
+		},
+	}, {
+		.pdev = {
+			.name			= "serial8250",
+			.id			= PLAT8250_DEV_PLATFORM1,
+			.dev			= {
+				.platform_data	= serial_platform_data1,
+			},
+		},
+	}, {
+		.pdev = {
+			.name			= "serial8250",
+			.id			= PLAT8250_DEV_PLATFORM2,
+			.dev			= {
+				.platform_data	= serial_platform_data2,
+			},
+		},
 	},
 };
 
 void __init omap_serial_init(void)
 {
-	int i, err;
+	int i;
 	const struct omap_uart_config *info;
 	char name[16];
 
@@ -506,14 +578,12 @@ void __init omap_serial_init(void)
 
 	if (info == NULL)
 		return;
-	if (cpu_is_omap44xx()) {
-		for (i = 0; i < OMAP_MAX_NR_PORTS; i++)
-			serial_platform_data[i].irq += 32;
-	}
 
 	for (i = 0; i < OMAP_MAX_NR_PORTS; i++) {
-		struct plat_serial8250_port *p = serial_platform_data + i;
 		struct omap_uart_state *uart = &omap_uart[i];
+		struct platform_device *pdev = &uart->pdev;
+		struct device *dev = &pdev->dev;
+		struct plat_serial8250_port *p = dev->platform_data;
 
 		if (!(info->enabled_uarts & (1 << i))) {
 			p->membase = NULL;
@@ -541,20 +611,21 @@ void __init omap_serial_init(void)
 		uart->num = i;
 		p->private_data = uart;
 		uart->p = p;
-		list_add(&uart->node, &uart_list);
+		list_add_tail(&uart->node, &uart_list);
+
+		if (cpu_is_omap44xx())
+			p->irq += 32;
 
 		omap_uart_enable_clocks(uart);
 		omap_uart_reset(uart);
 		omap_uart_idle_init(uart);
-	}
-
-	err = platform_device_register(&serial_device);
-
-#ifdef CONFIG_PM
-	if (!err)
-		err = sysfs_create_file(&serial_device.dev.kobj,
-					&sleep_timeout_attr.attr);
-#endif
 
+		if (WARN_ON(platform_device_register(pdev)))
+			continue;
+		if ((cpu_is_omap34xx() && uart->padconf) ||
+		    (uart->wk_en && uart->wk_mask)) {
+			device_init_wakeup(dev, true);
+			DEV_CREATE_FILE(dev, &dev_attr_sleep_timeout);
+		}
+	}
 }
-
diff --git a/arch/arm/plat-omap/cpu-omap.c b/arch/arm/plat-omap/cpu-omap.c
index 843e8af..1868c0d 100644
--- a/arch/arm/plat-omap/cpu-omap.c
+++ b/arch/arm/plat-omap/cpu-omap.c
@@ -78,10 +78,10 @@ static int omap_target(struct cpufreq_policy *policy,
 
 	/* Ensure desired rate is within allowed range.  Some govenors
 	 * (ondemand) will just pass target_freq=0 to get the minimum. */
-	if (target_freq < policy->cpuinfo.min_freq)
-		target_freq = policy->cpuinfo.min_freq;
-	if (target_freq > policy->cpuinfo.max_freq)
-		target_freq = policy->cpuinfo.max_freq;
+	if (target_freq < policy->min)
+		target_freq = policy->min;
+	if (target_freq > policy->max)
+		target_freq = policy->max;
 
 	freqs.old = omap_getspeed(0);
 	freqs.new = clk_round_rate(mpu_clk, target_freq * 1000) / 1000;
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index f0b71680..00940dc6 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -1292,6 +1292,7 @@ static void gpio_mask_irq(unsigned int irq)
 	struct gpio_bank *bank = get_irq_chip_data(irq);
 
 	_set_gpio_irqenable(bank, gpio, 0);
+	_set_gpio_triggering(bank, get_gpio_index(gpio), IRQ_TYPE_NONE);
 }
 
 static void gpio_unmask_irq(unsigned int irq)
@@ -1299,6 +1300,11 @@ static void gpio_unmask_irq(unsigned int irq)
 	unsigned int gpio = irq - IH_GPIO_BASE;
 	struct gpio_bank *bank = get_irq_chip_data(irq);
 	unsigned int irq_mask = 1 << get_gpio_index(gpio);
+	struct irq_desc *desc = irq_to_desc(irq);
+	u32 trigger = desc->status & IRQ_TYPE_SENSE_MASK;
+
+	if (trigger)
+		_set_gpio_triggering(bank, get_gpio_index(gpio), trigger);
 
 	/* For level-triggered GPIOs, the clearing must be done after
 	 * the HW source is cleared, thus after the handler has run */
diff --git a/arch/arm/plat-omap/include/mach/serial.h b/arch/arm/plat-omap/include/mach/serial.h
index 13abd02..def0529 100644
--- a/arch/arm/plat-omap/include/mach/serial.h
+++ b/arch/arm/plat-omap/include/mach/serial.h
@@ -59,6 +59,7 @@ extern void omap_uart_check_wakeup(void);
 extern void omap_uart_prepare_suspend(void);
 extern void omap_uart_prepare_idle(int num);
 extern void omap_uart_resume_idle(int num);
+extern void omap_uart_enable_irqs(int enable);
 #endif
 
 #endif
diff --git a/arch/avr32/include/asm/pgalloc.h b/arch/avr32/include/asm/pgalloc.h
index 6408213..92ecd84 100644
--- a/arch/avr32/include/asm/pgalloc.h
+++ b/arch/avr32/include/asm/pgalloc.h
@@ -83,7 +83,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 	quicklist_free_page(QUICK_PT, NULL, pte);
 }
 
-#define __pte_free_tlb(tlb,pte)				\
+#define __pte_free_tlb(tlb,pte,addr)			\
 do {							\
 	pgtable_page_dtor(pte);				\
 	tlb_remove_page((tlb), pte);			\
diff --git a/arch/cris/include/asm/pgalloc.h b/arch/cris/include/asm/pgalloc.h
index a1ba761..6da975d 100644
--- a/arch/cris/include/asm/pgalloc.h
+++ b/arch/cris/include/asm/pgalloc.h
@@ -47,7 +47,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 	__free_page(pte);
 }
 
-#define __pte_free_tlb(tlb,pte)				\
+#define __pte_free_tlb(tlb,pte,address)			\
 do {							\
 	pgtable_page_dtor(pte);				\
 	tlb_remove_page((tlb), pte);			\
diff --git a/arch/frv/include/asm/pgalloc.h b/arch/frv/include/asm/pgalloc.h
index 971e6ad..416d19a 100644
--- a/arch/frv/include/asm/pgalloc.h
+++ b/arch/frv/include/asm/pgalloc.h
@@ -49,7 +49,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 	__free_page(pte);
 }
 
-#define __pte_free_tlb(tlb,pte)				\
+#define __pte_free_tlb(tlb,pte,address)			\
 do {							\
 	pgtable_page_dtor(pte);				\
 	tlb_remove_page((tlb),(pte));			\
@@ -62,7 +62,7 @@ do {							\
  */
 #define pmd_alloc_one(mm, addr)		({ BUG(); ((pmd_t *) 2); })
 #define pmd_free(mm, x)			do { } while (0)
-#define __pmd_free_tlb(tlb,x)		do { } while (0)
+#define __pmd_free_tlb(tlb,x,a)		do { } while (0)
 
 #endif /* CONFIG_MMU */
 
diff --git a/arch/frv/include/asm/pgtable.h b/arch/frv/include/asm/pgtable.h
index 3323301..22c6069 100644
--- a/arch/frv/include/asm/pgtable.h
+++ b/arch/frv/include/asm/pgtable.h
@@ -225,7 +225,7 @@ static inline pud_t *pud_offset(pgd_t *pgd, unsigned long address)
  */
 #define pud_alloc_one(mm, address)		NULL
 #define pud_free(mm, x)				do { } while (0)
-#define __pud_free_tlb(tlb, x)			do { } while (0)
+#define __pud_free_tlb(tlb, x, address)		do { } while (0)
 
 /*
  * The "pud_xxx()" functions here are trivial for a folded two-level
diff --git a/arch/ia64/include/asm/pgalloc.h b/arch/ia64/include/asm/pgalloc.h
index b9ac1a6..96a8d92 100644
--- a/arch/ia64/include/asm/pgalloc.h
+++ b/arch/ia64/include/asm/pgalloc.h
@@ -48,7 +48,7 @@ static inline void pud_free(struct mm_struct *mm, pud_t *pud)
 {
 	quicklist_free(0, NULL, pud);
 }
-#define __pud_free_tlb(tlb, pud)	pud_free((tlb)->mm, pud)
+#define __pud_free_tlb(tlb, pud, address)	pud_free((tlb)->mm, pud)
 #endif /* CONFIG_PGTABLE_4 */
 
 static inline void
@@ -67,7 +67,7 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
 	quicklist_free(0, NULL, pmd);
 }
 
-#define __pmd_free_tlb(tlb, pmd)	pmd_free((tlb)->mm, pmd)
+#define __pmd_free_tlb(tlb, pmd, address)	pmd_free((tlb)->mm, pmd)
 
 static inline void
 pmd_populate(struct mm_struct *mm, pmd_t * pmd_entry, pgtable_t pte)
@@ -117,6 +117,6 @@ static inline void check_pgt_cache(void)
 	quicklist_trim(0, NULL, 25, 16);
 }
 
-#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, pte)
+#define __pte_free_tlb(tlb, pte, address)	pte_free((tlb)->mm, pte)
 
 #endif				/* _ASM_IA64_PGALLOC_H */
diff --git a/arch/ia64/include/asm/tlb.h b/arch/ia64/include/asm/tlb.h
index 20d8a39..85d965c 100644
--- a/arch/ia64/include/asm/tlb.h
+++ b/arch/ia64/include/asm/tlb.h
@@ -236,22 +236,22 @@ do {							\
 	__tlb_remove_tlb_entry(tlb, ptep, addr);	\
 } while (0)
 
-#define pte_free_tlb(tlb, ptep)				\
+#define pte_free_tlb(tlb, ptep, address)		\
 do {							\
 	tlb->need_flush = 1;				\
-	__pte_free_tlb(tlb, ptep);			\
+	__pte_free_tlb(tlb, ptep, address);		\
 } while (0)
 
-#define pmd_free_tlb(tlb, ptep)				\
+#define pmd_free_tlb(tlb, ptep, address)		\
 do {							\
 	tlb->need_flush = 1;				\
-	__pmd_free_tlb(tlb, ptep);			\
+	__pmd_free_tlb(tlb, ptep, address);		\
 } while (0)
 
-#define pud_free_tlb(tlb, pudp)				\
+#define pud_free_tlb(tlb, pudp, address)		\
 do {							\
 	tlb->need_flush = 1;				\
-	__pud_free_tlb(tlb, pudp);			\
+	__pud_free_tlb(tlb, pudp, address);		\
 } while (0)
 
 #endif /* _ASM_IA64_TLB_H */
diff --git a/arch/m32r/include/asm/pgalloc.h b/arch/m32r/include/asm/pgalloc.h
index f11a2b9..0fc7361 100644
--- a/arch/m32r/include/asm/pgalloc.h
+++ b/arch/m32r/include/asm/pgalloc.h
@@ -58,7 +58,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 	__free_page(pte);
 }
 
-#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, (pte))
+#define __pte_free_tlb(tlb, pte, addr)	pte_free((tlb)->mm, (pte))
 
 /*
  * allocating and freeing a pmd is trivial: the 1-entry pmd is
@@ -68,7 +68,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 
 #define pmd_alloc_one(mm, addr)		({ BUG(); ((pmd_t *)2); })
 #define pmd_free(mm, x)			do { } while (0)
-#define __pmd_free_tlb(tlb, x)		do { } while (0)
+#define __pmd_free_tlb(tlb, x, addr)	do { } while (0)
 #define pgd_populate(mm, pmd, pte)	BUG()
 
 #define check_pgt_cache()	do { } while (0)
diff --git a/arch/m68k/include/asm/motorola_pgalloc.h b/arch/m68k/include/asm/motorola_pgalloc.h
index d08bf62..15ee4c7 100644
--- a/arch/m68k/include/asm/motorola_pgalloc.h
+++ b/arch/m68k/include/asm/motorola_pgalloc.h
@@ -54,7 +54,8 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t page)
 	__free_page(page);
 }
 
-static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page)
+static inline void __pte_free_tlb(struct mmu_gather *tlb, pgtable_t page,
+				  unsigned long address)
 {
 	pgtable_page_dtor(page);
 	cache_page(kmap(page));
@@ -73,7 +74,8 @@ static inline int pmd_free(struct mm_struct *mm, pmd_t *pmd)
 	return free_pointer_table(pmd);
 }
 
-static inline int __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
+static inline int __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
+				 unsigned long address)
 {
 	return free_pointer_table(pmd);
 }
diff --git a/arch/m68k/include/asm/sun3_pgalloc.h b/arch/m68k/include/asm/sun3_pgalloc.h
index d4c83f1..48d80d5 100644
--- a/arch/m68k/include/asm/sun3_pgalloc.h
+++ b/arch/m68k/include/asm/sun3_pgalloc.h
@@ -32,7 +32,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t page)
         __free_page(page);
 }
 
-#define __pte_free_tlb(tlb,pte)				\
+#define __pte_free_tlb(tlb,pte,addr)			\
 do {							\
 	pgtable_page_dtor(pte);				\
 	tlb_remove_page((tlb), pte);			\
@@ -80,7 +80,7 @@ static inline void pmd_populate(struct mm_struct *mm, pmd_t *pmd, pgtable_t page
  * inside the pgd, so has no extra memory associated with it.
  */
 #define pmd_free(mm, x)			do { } while (0)
-#define __pmd_free_tlb(tlb, x)		do { } while (0)
+#define __pmd_free_tlb(tlb, x, addr)	do { } while (0)
 
 static inline void pgd_free(struct mm_struct *mm, pgd_t *pgd)
 {
diff --git a/arch/microblaze/Makefile b/arch/microblaze/Makefile
index d0bcf80..8439598 100644
--- a/arch/microblaze/Makefile
+++ b/arch/microblaze/Makefile
@@ -6,14 +6,16 @@ endif
 
 # What CPU vesion are we building for, and crack it open
 # as major.minor.rev
-CPU_VER=$(subst ",,$(CONFIG_XILINX_MICROBLAZE0_HW_VER) )
-CPU_MAJOR=$(shell echo $(CPU_VER) | cut -d '.' -f 1)
-CPU_MINOR=$(shell echo $(CPU_VER) | cut -d '.' -f 2)
-CPU_REV=$(shell echo $(CPU_VER) | cut -d '.' -f 3)
+CPU_VER   := $(shell echo $(CONFIG_XILINX_MICROBLAZE0_HW_VER))
+CPU_MAJOR := $(shell echo $(CPU_VER) | cut -d '.' -f 1)
+CPU_MINOR := $(shell echo $(CPU_VER) | cut -d '.' -f 2)
+CPU_REV   := $(shell echo $(CPU_VER) | cut -d '.' -f 3)
 
 export CPU_VER CPU_MAJOR CPU_MINOR CPU_REV
 
 # Use cpu-related CONFIG_ vars to set compile options.
+# The various CONFIG_XILINX cpu features options are integers 0/1/2...
+# rather than bools y/n
 
 # Work out HW multipler support.  This is icky.
 # 1. Spartan2 has no HW multiplers.
@@ -34,30 +36,29 @@ CPUFLAGS-$(CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR) += -mxl-pattern-compare
 
 CPUFLAGS-1 += $(call cc-option,-mcpu=v$(CPU_VER))
 
-# The various CONFIG_XILINX cpu features options are integers 0/1/2...
-# rather than bools y/n
-
 # r31 holds current when in kernel mode
-CFLAGS_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
+KBUILD_KERNEL += -ffixed-r31 $(CPUFLAGS-1) $(CPUFLAGS-2)
 
 LDFLAGS		:=
 LDFLAGS_vmlinux	:=
-LDFLAGS_BLOB := --format binary --oformat elf32-microblaze
 
-LIBGCC := $(shell $(CC) $(CFLAGS_KERNEL) -print-libgcc-file-name)
+LIBGCC := $(shell $(CC) $(KBUILD_KERNEL) -print-libgcc-file-name)
 
-head-y		:= arch/microblaze/kernel/head.o
-libs-y		+= arch/microblaze/lib/ $(LIBGCC)
-core-y		+= arch/microblaze/kernel/ arch/microblaze/mm/ \
-		   arch/microblaze/platform/
+head-y := arch/microblaze/kernel/head.o
+libs-y += arch/microblaze/lib/
+libs-y += $(LIBGCC)
+core-y += arch/microblaze/kernel/
+core-y += arch/microblaze/mm/
+core-y += arch/microblaze/platform/
 
-boot := arch/$(ARCH)/boot
+boot := arch/microblaze/boot
 
 # defines filename extension depending memory management type
 ifeq ($(CONFIG_MMU),)
-MMUEXT		:= -nommu
+MMU := -nommu
 endif
-export	MMUEXT
+
+export MMU
 
 all: linux.bin
 
diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h
index 5c17342..7c3ec13 100644
--- a/arch/microblaze/include/asm/io.h
+++ b/arch/microblaze/include/asm/io.h
@@ -14,7 +14,6 @@
 #include <asm/byteorder.h>
 #include <asm/page.h>
 #include <linux/types.h>
-#include <asm/byteorder.h>
 #include <linux/mm.h>          /* Get struct page {...} */
 
 
diff --git a/arch/microblaze/include/asm/pgalloc.h b/arch/microblaze/include/asm/pgalloc.h
index 59a757e..b0131da 100644
--- a/arch/microblaze/include/asm/pgalloc.h
+++ b/arch/microblaze/include/asm/pgalloc.h
@@ -180,7 +180,7 @@ extern inline void pte_free(struct mm_struct *mm, struct page *ptepage)
 	__free_page(ptepage);
 }
 
-#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, (pte))
+#define __pte_free_tlb(tlb, pte, addr)	pte_free((tlb)->mm, (pte))
 
 #define pmd_populate(mm, pmd, pte)	(pmd_val(*(pmd)) = page_address(pte))
 
@@ -193,7 +193,7 @@ extern inline void pte_free(struct mm_struct *mm, struct page *ptepage)
  */
 #define pmd_alloc_one(mm, address)	({ BUG(); ((pmd_t *)2); })
 /*#define pmd_free(mm, x)			do { } while (0)*/
-#define __pmd_free_tlb(tlb, x)		do { } while (0)
+#define __pmd_free_tlb(tlb, x, addr)	do { } while (0)
 #define pgd_populate(mm, pmd, pte)	BUG()
 
 extern int do_check_pgt_cache(int, int);
diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h
index 4c57a58..cc3a4df 100644
--- a/arch/microblaze/include/asm/pgtable.h
+++ b/arch/microblaze/include/asm/pgtable.h
@@ -185,6 +185,7 @@ static inline pte_t pte_mkspecial(pte_t pte)	{ return pte; }
 
 /* Definitions for MicroBlaze. */
 #define	_PAGE_GUARDED	0x001	/* G: page is guarded from prefetch */
+#define _PAGE_FILE	0x001	/* when !present: nonlinear file mapping */
 #define _PAGE_PRESENT	0x002	/* software: PTE contains a translation */
 #define	_PAGE_NO_CACHE	0x004	/* I: caching is inhibited */
 #define	_PAGE_WRITETHRU	0x008	/* W: caching is write-through */
@@ -320,8 +321,7 @@ static inline int pte_write(pte_t pte) { return pte_val(pte) & _PAGE_RW; }
 static inline int pte_exec(pte_t pte)  { return pte_val(pte) & _PAGE_EXEC; }
 static inline int pte_dirty(pte_t pte) { return pte_val(pte) & _PAGE_DIRTY; }
 static inline int pte_young(pte_t pte) { return pte_val(pte) & _PAGE_ACCESSED; }
-/* FIXME */
-static inline int pte_file(pte_t pte)		{ return 0; }
+static inline int pte_file(pte_t pte)  { return pte_val(pte) & _PAGE_FILE; }
 
 static inline void pte_uncache(pte_t pte) { pte_val(pte) |= _PAGE_NO_CACHE; }
 static inline void pte_cache(pte_t pte)   { pte_val(pte) &= ~_PAGE_NO_CACHE; }
@@ -488,7 +488,7 @@ static inline pmd_t *pmd_offset(pgd_t *dir, unsigned long address)
 /* Encode and decode a nonlinear file mapping entry */
 #define PTE_FILE_MAX_BITS	29
 #define pte_to_pgoff(pte)	(pte_val(pte) >> 3)
-#define pgoff_to_pte(off)	((pte_t) { ((off) << 3) })
+#define pgoff_to_pte(off)	((pte_t) { ((off) << 3) | _PAGE_FILE })
 
 extern pgd_t swapper_pg_dir[PTRS_PER_PGD];
 
diff --git a/arch/microblaze/include/asm/prom.h b/arch/microblaze/include/asm/prom.h
index 20f7b3a..37e6f30 100644
--- a/arch/microblaze/include/asm/prom.h
+++ b/arch/microblaze/include/asm/prom.h
@@ -16,6 +16,18 @@
 #define _ASM_MICROBLAZE_PROM_H
 #ifdef __KERNEL__
 
+/* Definitions used by the flattened device tree */
+#define OF_DT_HEADER		0xd00dfeed /* marker */
+#define OF_DT_BEGIN_NODE	0x1 /* Start of node, full name */
+#define OF_DT_END_NODE		0x2 /* End node */
+#define OF_DT_PROP		0x3 /* Property: name off, size, content */
+#define OF_DT_NOP		0x4 /* nop */
+#define OF_DT_END		0x9
+
+#define OF_DT_VERSION		0x10
+
+#ifndef __ASSEMBLY__
+
 #include <linux/types.h>
 #include <linux/proc_fs.h>
 #include <linux/platform_device.h>
@@ -29,16 +41,6 @@
 #define of_prop_cmp(s1, s2)		strcmp((s1), (s2))
 #define of_node_cmp(s1, s2)		strcasecmp((s1), (s2))
 
-/* Definitions used by the flattened device tree */
-#define OF_DT_HEADER		0xd00dfeed /* marker */
-#define OF_DT_BEGIN_NODE	0x1 /* Start of node, full name */
-#define OF_DT_END_NODE		0x2 /* End node */
-#define OF_DT_PROP		0x3 /* Property: name off, size, content */
-#define OF_DT_NOP		0x4 /* nop */
-#define OF_DT_END		0x9
-
-#define OF_DT_VERSION		0x10
-
 /*
  * This is what gets passed to the kernel by prom_init or kexec
  *
@@ -309,5 +311,6 @@ extern void __iomem *of_iomap(struct device_node *device, int index);
  */
 #include <linux/of.h>
 
+#endif /* __ASSEMBLY__ */
 #endif /* __KERNEL__ */
 #endif /* _ASM_MICROBLAZE_PROM_H */
diff --git a/arch/microblaze/include/asm/tlb.h b/arch/microblaze/include/asm/tlb.h
index c472d28..e8abd4a 100644
--- a/arch/microblaze/include/asm/tlb.h
+++ b/arch/microblaze/include/asm/tlb.h
@@ -11,7 +11,7 @@
 #ifndef _ASM_MICROBLAZE_TLB_H
 #define _ASM_MICROBLAZE_TLB_H
 
-#define tlb_flush(tlb)	do {} while (0)
+#define tlb_flush(tlb)	flush_tlb_mm((tlb)->mm)
 
 #include <asm-generic/tlb.h>
 
diff --git a/arch/microblaze/include/asm/uaccess.h b/arch/microblaze/include/asm/uaccess.h
index 65adad6..5431b46 100644
--- a/arch/microblaze/include/asm/uaccess.h
+++ b/arch/microblaze/include/asm/uaccess.h
@@ -189,7 +189,7 @@ extern long strnlen_user(const char *src, long count);
 
 #define __put_user(x, ptr)						\
 ({									\
-	__typeof__(*(ptr)) __gu_val = x;				\
+	__typeof__(*(ptr)) volatile __gu_val = (x);			\
 	long __gu_err = 0;						\
 	switch (sizeof(__gu_val)) {					\
 	case 1:								\
diff --git a/arch/microblaze/kernel/Makefile b/arch/microblaze/kernel/Makefile
index f4a5e19..d487729 100644
--- a/arch/microblaze/kernel/Makefile
+++ b/arch/microblaze/kernel/Makefile
@@ -17,4 +17,4 @@ obj-$(CONFIG_HEART_BEAT)	+= heartbeat.o
 obj-$(CONFIG_MODULES)		+= microblaze_ksyms.o module.o
 obj-$(CONFIG_MMU)		+= misc.o
 
-obj-y	+= entry$(MMUEXT).o
+obj-y	+= entry$(MMU).o
diff --git a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
index 153f57c5..c259786 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo-pvr-full.c
@@ -22,7 +22,7 @@
 
 #define CI(c, p) { ci->c = PVR_##p(pvr); }
 #define err_printk(x) \
-	early_printk("ERROR: Microblaze " x " - different for PVR and DTS\n");
+	early_printk("ERROR: Microblaze " x "-different for PVR and DTS\n");
 
 void set_cpuinfo_pvr_full(struct cpuinfo *ci, struct device_node *cpu)
 {
diff --git a/arch/microblaze/kernel/cpu/cpuinfo-static.c b/arch/microblaze/kernel/cpu/cpuinfo-static.c
index 450ca6b..adb448f 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo-static.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo-static.c
@@ -18,7 +18,7 @@ static const char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY;
 static const char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
 
 #define err_printk(x) \
-	early_printk("ERROR: Microblaze " x "- different for kernel and DTS\n");
+	early_printk("ERROR: Microblaze " x "-different for kernel and DTS\n");
 
 void __init set_cpuinfo_static(struct cpuinfo *ci, struct device_node *cpu)
 {
diff --git a/arch/microblaze/kernel/cpu/cpuinfo.c b/arch/microblaze/kernel/cpu/cpuinfo.c
index a10bea1..c411c67 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo.c
@@ -26,6 +26,8 @@ const struct cpu_ver_key cpu_ver_lookup[] = {
 	{"7.10.b", 0x09},
 	{"7.10.c", 0x0a},
 	{"7.10.d", 0x0b},
+	{"7.20.a", 0x0c},
+	{"7.20.b", 0x0d},
 	/* FIXME There is no keycode defined in MBV for these versions */
 	{"2.10.a", 0x10},
 	{"3.00.a", 0x20},
diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S
index e568d6e..e41c6ce 100644
--- a/arch/microblaze/kernel/head.S
+++ b/arch/microblaze/kernel/head.S
@@ -31,6 +31,7 @@
 #include <linux/linkage.h>
 #include <asm/thread_info.h>
 #include <asm/page.h>
+#include <asm/prom.h>		/* for OF_DT_HEADER */
 
 #ifdef CONFIG_MMU
 #include <asm/setup.h> /* COMMAND_LINE_SIZE */
@@ -54,11 +55,19 @@ ENTRY(_start)
 	andi	r1, r1, ~2
 	mts	rmsr, r1
 
-/* save fdt to kernel location */
-/* r7 stores pointer to fdt blob */
-	beqi	r7, no_fdt_arg
+/* r7 may point to an FDT, or there may be one linked in.
+   if it's in r7, we've got to save it away ASAP.
+   We ensure r7 points to a valid FDT, just in case the bootloader
+   is broken or non-existent */
+	beqi	r7, no_fdt_arg			/* NULL pointer?  don't copy */
+	lw	r11, r0, r7			/* Does r7 point to a */
+	rsubi	r11, r11, OF_DT_HEADER		/* valid FDT? */
+	beqi	r11, _prepare_copy_fdt
+	or	r7, r0, r0		/* clear R7 when not valid DTB */
+	bnei	r11, no_fdt_arg			/* No - get out of here */
+_prepare_copy_fdt:
 	or	r11, r0, r0 /* incremment */
-	ori	r4, r0, TOPHYS(_fdt_start) /* save bram context */
+	ori	r4, r0, TOPHYS(_fdt_start)
 	ori	r3, r0, (0x4000 - 4)
 _copy_fdt:
 	lw	r12, r7, r11 /* r12 = r7 + r11 */
diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S
index 9d591cd..3288c97 100644
--- a/arch/microblaze/kernel/hw_exception_handler.S
+++ b/arch/microblaze/kernel/hw_exception_handler.S
@@ -74,6 +74,7 @@
 
 #include <asm/mmu.h>
 #include <asm/pgtable.h>
+#include <asm/signal.h>
 #include <asm/asm-offsets.h>
 
 /* Helpful Macros */
@@ -428,19 +429,9 @@ handle_unaligned_ex:
 	mfs	r17, rbtr;	/* ESR[DS] set - return address in BTR */
 	nop
 _no_delayslot:
-#endif
-
-#ifdef CONFIG_MMU
-	/* Check if unaligned address is last on a 4k page */
-		andi	r5, r4, 0xffc
-		xori	r5, r5, 0xffc
-		bnei	r5, _unaligned_ex2
-	_unaligned_ex1:
-		RESTORE_STATE;
-/* Another page must be accessed or physical address not in page table */
-		bri	unaligned_data_trap
-
-	_unaligned_ex2:
+	/* jump to high level unaligned handler */
+	RESTORE_STATE;
+	bri	unaligned_data_trap
 #endif
 	andi	r6, r3, 0x3E0; /* Mask and extract the register operand */
 	srl	r6, r6; /* r6 >> 5 */
@@ -450,45 +441,6 @@ _no_delayslot:
 	srl	r6, r6;
 	/* Store the register operand in a temporary location */
 	sbi	r6, r0, TOPHYS(ex_reg_op);
-#ifdef CONFIG_MMU
-	/* Get physical address */
-	/* If we are faulting a kernel address, we have to use the
-	 * kernel page tables.
-	 */
-	ori	r5, r0, CONFIG_KERNEL_START
-	cmpu	r5, r4, r5
-	bgti	r5, _unaligned_ex3
-	ori	r5, r0, swapper_pg_dir
-	bri	_unaligned_ex4
-
-	/* Get the PGD for the current thread. */
-_unaligned_ex3: /* user thread */
-	addi	r5 ,CURRENT_TASK, TOPHYS(0); /* get current task address */
-	lwi	r5, r5, TASK_THREAD + PGDIR
-_unaligned_ex4:
-	tophys(r5,r5)
-	BSRLI(r6,r4,20)			/* Create L1 (pgdir/pmd) address */
-	andi	r6, r6, 0xffc
-/* Assume pgdir aligned on 4K boundary, no need for "andi r5,r5,0xfffff003" */
-	or	r5, r5, r6
-	lwi	r6, r5, 0		/* Get L1 entry */
-	andi	r5, r6, 0xfffff000	/* Extract L2 (pte) base address. */
-	beqi	r5, _unaligned_ex1	/* Bail if no table */
-
-	tophys(r5,r5)
-	BSRLI(r6,r4,10)			/* Compute PTE address */
-	andi	r6, r6, 0xffc
-	andi	r5, r5, 0xfffff003
-	or	r5, r5, r6
-	lwi	r5, r5, 0		/* Get Linux PTE */
-
-	andi	r6, r5, _PAGE_PRESENT
-	beqi	r6, _unaligned_ex1	/* Bail if no page */
-
-	andi	r5, r5, 0xfffff000	/* Extract RPN */
-	andi	r4, r4, 0x00000fff	/* Extract offset */
-	or	r4, r4, r5		/* Create physical address */
-#endif /* CONFIG_MMU */
 
 	andi	r6, r3, 0x400; /* Extract ESR[S] */
 	bnei	r6, ex_sw;
@@ -959,15 +911,15 @@ _unaligned_data_exception:
 	andi	r6, r3, 0x800;	/* Extract ESR[W] - delay slot */
 ex_lw_vm:
 	beqid	r6, ex_lhw_vm;
-	lbui	r5, r4, 0;	/* Exception address in r4 - delay slot */
+load1:	lbui	r5, r4, 0;	/* Exception address in r4 - delay slot */
 /* Load a word, byte-by-byte from destination address and save it in tmp space*/
 	la	r6, r0, ex_tmp_data_loc_0;
 	sbi	r5, r6, 0;
-	lbui	r5, r4, 1;
+load2:	lbui	r5, r4, 1;
 	sbi	r5, r6, 1;
-	lbui	r5, r4, 2;
+load3:	lbui	r5, r4, 2;
 	sbi	r5, r6, 2;
-	lbui	r5, r4, 3;
+load4:	lbui	r5, r4, 3;
 	sbi	r5, r6, 3;
 	brid	ex_lw_tail_vm;
 /* Get the destination register value into r3 - delay slot */
@@ -977,7 +929,7 @@ ex_lhw_vm:
 	 * save it in tmp space */
 	la	r6, r0, ex_tmp_data_loc_0;
 	sbi	r5, r6, 0;
-	lbui	r5, r4, 1;
+load5:	lbui	r5, r4, 1;
 	sbi	r5, r6, 1;
 	lhui	r3, r6, 0;	/* Get the destination register value into r3 */
 ex_lw_tail_vm:
@@ -996,22 +948,53 @@ ex_sw_tail_vm:
 	swi	r3, r5, 0;	/* Get the word - delay slot */
 	/* Store the word, byte-by-byte into destination address */
 	lbui	r3, r5, 0;
-	sbi	r3, r4, 0;
+store1:	sbi	r3, r4, 0;
 	lbui	r3, r5, 1;
-	sbi	r3, r4, 1;
+store2:	sbi	r3, r4, 1;
 	lbui	r3, r5, 2;
-	sbi	r3, r4, 2;
+store3:	sbi	r3, r4, 2;
 	lbui	r3, r5, 3;
 	brid	ret_from_exc;
-	sbi	r3, r4, 3;	/* Delay slot */
+store4:	sbi	r3, r4, 3;	/* Delay slot */
 ex_shw_vm:
 	/* Store the lower half-word, byte-by-byte into destination address */
 	lbui	r3, r5, 2;
-	sbi	r3, r4, 0;
+store5:	sbi	r3, r4, 0;
 	lbui	r3, r5, 3;
 	brid	ret_from_exc;
-	sbi	r3, r4, 1;	/* Delay slot */
+store6:	sbi	r3, r4, 1;	/* Delay slot */
 ex_sw_end_vm:			/* Exception handling of store word, ends. */
+
+/* We have to prevent cases that get/put_user macros get unaligned pointer
+ * to bad page area. We have to find out which origin instruction caused it
+ * and called fixup for that origin instruction not instruction in unaligned
+ * handler */
+ex_unaligned_fixup:
+	ori	r5, r7, 0 /* setup pointer to pt_regs */
+	lwi	r6, r7, PT_PC; /* faulting address is one instruction above */
+	addik	r6, r6, -4 /* for finding proper fixup */
+	swi	r6, r7, PT_PC; /* a save back it to PT_PC */
+	addik	r7, r0, SIGSEGV
+	/* call bad_page_fault for finding aligned fixup, fixup address is saved
+	 * in PT_PC which is used as return address from exception */
+	la	r15, r0, ret_from_exc-8 /* setup return address */
+	brid	bad_page_fault
+	nop
+
+/* We prevent all load/store because it could failed any attempt to access */
+.section __ex_table,"a";
+	.word	load1,ex_unaligned_fixup;
+	.word	load2,ex_unaligned_fixup;
+	.word	load3,ex_unaligned_fixup;
+	.word	load4,ex_unaligned_fixup;
+	.word	load5,ex_unaligned_fixup;
+	.word	store1,ex_unaligned_fixup;
+	.word	store2,ex_unaligned_fixup;
+	.word	store3,ex_unaligned_fixup;
+	.word	store4,ex_unaligned_fixup;
+	.word	store5,ex_unaligned_fixup;
+	.word	store6,ex_unaligned_fixup;
+.previous;
 .end _unaligned_data_exception
 #endif /* CONFIG_MMU */
 
diff --git a/arch/microblaze/kernel/module.c b/arch/microblaze/kernel/module.c
index 5141417..5a45b1a 100644
--- a/arch/microblaze/kernel/module.c
+++ b/arch/microblaze/kernel/module.c
@@ -57,7 +57,6 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 	Elf32_Rela *rela = (void *)sechdrs[relsec].sh_addr;
 	Elf32_Sym *sym;
 	unsigned long int *location;
-	unsigned long int locoffs;
 	unsigned long int value;
 #if __GNUC__ < 4
 	unsigned long int old_value;
@@ -113,10 +112,12 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 			break;
 
 		case R_MICROBLAZE_64_PCREL:
-			locoffs = (location[0] & 0xFFFF) << 16 |
+#if __GNUC__ < 4
+			old_value = (location[0] & 0xFFFF) << 16 |
 				(location[1] & 0xFFFF);
-			value -= (unsigned long int)(location) + 4 +
-				locoffs;
+			value -= old_value;
+#endif
+			value -= (unsigned long int)(location) + 4;
 			location[0] = (location[0] & 0xFFFF0000) |
 					(value >> 16);
 			location[1] = (location[1] & 0xFFFF0000) |
@@ -125,6 +126,14 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 				value);
 			break;
 
+		case R_MICROBLAZE_32_PCREL_LO:
+			pr_debug("R_MICROBLAZE_32_PCREL_LO\n");
+			break;
+
+		case R_MICROBLAZE_64_NONE:
+			pr_debug("R_MICROBLAZE_NONE\n");
+			break;
+
 		case R_MICROBLAZE_NONE:
 			pr_debug("R_MICROBLAZE_NONE\n");
 			break;
@@ -133,7 +142,7 @@ int apply_relocate_add(Elf32_Shdr *sechdrs, const char *strtab,
 			printk(KERN_ERR "module %s: "
 				"Unknown relocation: %u\n",
 				module->name,
-				ELF32_R_TYPE(rela->r_info));
+				ELF32_R_TYPE(rela[i].r_info));
 			return -ENOEXEC;
 		}
 	}
diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c
index 8709bea..2a97bf5 100644
--- a/arch/microblaze/kernel/setup.c
+++ b/arch/microblaze/kernel/setup.c
@@ -138,8 +138,12 @@ void __init machine_early_init(const char *cmdline, unsigned int ram,
 	setup_early_printk(NULL);
 #endif
 
-	early_printk("Ramdisk addr 0x%08x, FDT 0x%08x\n", ram, fdt);
-	printk(KERN_NOTICE "Found FDT at 0x%08x\n", fdt);
+	early_printk("Ramdisk addr 0x%08x, ", ram);
+	if (fdt)
+		early_printk("FDT at 0x%08x\n", fdt);
+	else
+		early_printk("Compiled-in FDT at 0x%08x\n",
+					(unsigned int)_fdt_start);
 
 #ifdef CONFIG_MTD_UCLINUX
 	early_printk("Found romfs @ 0x%08x (0x%08x)\n",
diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c
index e000bce..b96f168 100644
--- a/arch/microblaze/kernel/sys_microblaze.c
+++ b/arch/microblaze/kernel/sys_microblaze.c
@@ -33,105 +33,6 @@
 #include <linux/unistd.h>
 
 #include <asm/syscalls.h>
-/*
- * sys_ipc() is the de-multiplexer for the SysV IPC calls..
- *
- * This is really horribly ugly. This will be remove with new toolchain.
- */
-asmlinkage long
-sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth)
-{
-	int version, ret;
-
-	version = call >> 16; /* hack for backward compatibility */
-	call &= 0xffff;
-
-	ret = -EINVAL;
-	switch (call) {
-	case SEMOP:
-		ret = sys_semop(first, (struct sembuf *)ptr, second);
-		break;
-	case SEMGET:
-		ret = sys_semget(first, second, third);
-		break;
-	case SEMCTL:
-	{
-		union semun fourth;
-
-		if (!ptr)
-			break;
-		ret = (access_ok(VERIFY_READ, ptr, sizeof(long)) ? 0 : -EFAULT)
-				|| (get_user(fourth.__pad, (void **)ptr)) ;
-		if (ret)
-			break;
-		ret = sys_semctl(first, second, third, fourth);
-		break;
-	}
-	case MSGSND:
-		ret = sys_msgsnd(first, (struct msgbuf *) ptr, second, third);
-		break;
-	case MSGRCV:
-		switch (version) {
-		case 0: {
-			struct ipc_kludge tmp;
-
-			if (!ptr)
-				break;
-			ret = (access_ok(VERIFY_READ, ptr, sizeof(tmp))
-				? 0 : -EFAULT) || copy_from_user(&tmp,
-				(struct ipc_kludge *) ptr, sizeof(tmp));
-			if (ret)
-				break;
-			ret = sys_msgrcv(first, tmp.msgp, second, tmp.msgtyp,
-					third);
-			break;
-			}
-		default:
-			ret = sys_msgrcv(first, (struct msgbuf *) ptr,
-					second, fifth, third);
-			break;
-		}
-		break;
-	case MSGGET:
-		ret = sys_msgget((key_t) first, second);
-		break;
-	case MSGCTL:
-		ret = sys_msgctl(first, second, (struct msqid_ds *) ptr);
-		break;
-	case SHMAT:
-		switch (version) {
-		default: {
-			ulong raddr;
-			ret = access_ok(VERIFY_WRITE, (ulong *) third,
-					sizeof(ulong)) ? 0 : -EFAULT;
-			if (ret)
-				break;
-			ret = do_shmat(first, (char *) ptr, second, &raddr);
-			if (ret)
-				break;
-			ret = put_user(raddr, (ulong *) third);
-			break;
-			}
-		case 1:	/* iBCS2 emulator entry point */
-			if (!segment_eq(get_fs(), get_ds()))
-				break;
-			ret = do_shmat(first, (char *) ptr, second,
-					(ulong *) third);
-			break;
-		}
-		break;
-	case SHMDT:
-		ret = sys_shmdt((char *)ptr);
-		break;
-	case SHMGET:
-		ret = sys_shmget(first, second, third);
-		break;
-	case SHMCTL:
-		ret = sys_shmctl(first, second, (struct shmid_ds *) ptr);
-		break;
-	}
-	return ret;
-}
 
 asmlinkage long microblaze_vfork(struct pt_regs *regs)
 {
diff --git a/arch/microblaze/kernel/syscall_table.S b/arch/microblaze/kernel/syscall_table.S
index 31b32a6..216db81 100644
--- a/arch/microblaze/kernel/syscall_table.S
+++ b/arch/microblaze/kernel/syscall_table.S
@@ -121,7 +121,7 @@ ENTRY(sys_call_table)
 	.long sys_wait4
 	.long sys_swapoff		/* 115 */
 	.long sys_sysinfo
-	.long sys_ipc
+	.long sys_ni_syscall		/* old sys_ipc */
 	.long sys_fsync
 	.long sys_ni_syscall		/* sys_sigreturn_wrapper */
 	.long sys_clone		/* 120 */
diff --git a/arch/microblaze/mm/fault.c b/arch/microblaze/mm/fault.c
index 956607a..d9d249a 100644
--- a/arch/microblaze/mm/fault.c
+++ b/arch/microblaze/mm/fault.c
@@ -69,7 +69,7 @@ static int store_updates_sp(struct pt_regs *regs)
  * It is called from do_page_fault above and from some of the procedures
  * in traps.c.
  */
-static void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
+void bad_page_fault(struct pt_regs *regs, unsigned long address, int sig)
 {
 	const struct exception_table_entry *fixup;
 /* MS: no context */
@@ -122,15 +122,10 @@ void do_page_fault(struct pt_regs *regs, unsigned long address,
 	}
 #endif /* CONFIG_KGDB */
 
-	if (in_atomic() || mm == NULL) {
-		/* FIXME */
-		if (kernel_mode(regs)) {
-			printk(KERN_EMERG
-				"Page fault in kernel mode - Oooou!!! pid %d\n",
-				current->pid);
-			_exception(SIGSEGV, regs, code, address);
-			return;
-		}
+	if (in_atomic() || !mm) {
+		if (kernel_mode(regs))
+			goto bad_area_nosemaphore;
+
 		/* in_atomic() in user mode is really bad,
 		   as is current->mm == NULL. */
 		printk(KERN_EMERG "Page fault in user mode with "
diff --git a/arch/mips/include/asm/pgalloc.h b/arch/mips/include/asm/pgalloc.h
index 1275831..3738f4b4 100644
--- a/arch/mips/include/asm/pgalloc.h
+++ b/arch/mips/include/asm/pgalloc.h
@@ -98,23 +98,12 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 	__free_pages(pte, PTE_ORDER);
 }
 
-#define __pte_free_tlb(tlb,pte)				\
+#define __pte_free_tlb(tlb,pte,address)			\
 do {							\
 	pgtable_page_dtor(pte);				\
 	tlb_remove_page((tlb), pte);			\
 } while (0)
 
-#ifdef CONFIG_32BIT
-
-/*
- * allocating and freeing a pmd is trivial: the 1-entry pmd is
- * inside the pgd, so has no extra memory associated with it.
- */
-#define pmd_free(mm, x)			do { } while (0)
-#define __pmd_free_tlb(tlb, x)		do { } while (0)
-
-#endif
-
 #ifdef CONFIG_64BIT
 
 static inline pmd_t *pmd_alloc_one(struct mm_struct *mm, unsigned long address)
@@ -132,7 +121,7 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
 	free_pages((unsigned long)pmd, PMD_ORDER);
 }
 
-#define __pmd_free_tlb(tlb, x)	pmd_free((tlb)->mm, x)
+#define __pmd_free_tlb(tlb, x, addr)	pmd_free((tlb)->mm, x)
 
 #endif
 
diff --git a/arch/mn10300/include/asm/pgalloc.h b/arch/mn10300/include/asm/pgalloc.h
index ec057e1..a19f113 100644
--- a/arch/mn10300/include/asm/pgalloc.h
+++ b/arch/mn10300/include/asm/pgalloc.h
@@ -51,6 +51,6 @@ static inline void pte_free(struct mm_struct *mm, struct page *pte)
 }
 
 
-#define __pte_free_tlb(tlb, pte) tlb_remove_page((tlb), (pte))
+#define __pte_free_tlb(tlb, pte, addr) tlb_remove_page((tlb), (pte))
 
 #endif /* _ASM_PGALLOC_H */
diff --git a/arch/parisc/include/asm/tlb.h b/arch/parisc/include/asm/tlb.h
index 383b1db..0792490 100644
--- a/arch/parisc/include/asm/tlb.h
+++ b/arch/parisc/include/asm/tlb.h
@@ -21,7 +21,7 @@ do {	if (!(tlb)->fullmm)	\
 
 #include <asm-generic/tlb.h>
 
-#define __pmd_free_tlb(tlb, pmd)	pmd_free((tlb)->mm, pmd)
-#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, pte)
+#define __pmd_free_tlb(tlb, pmd, addr)	pmd_free((tlb)->mm, pmd)
+#define __pte_free_tlb(tlb, pte, addr)	pte_free((tlb)->mm, pte)
 
 #endif
diff --git a/arch/powerpc/boot/dts/mpc8377_rdb.dts b/arch/powerpc/boot/dts/mpc8377_rdb.dts
index 224b4f0..4f06dbc 100644
--- a/arch/powerpc/boot/dts/mpc8377_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8377_rdb.dts
@@ -410,7 +410,7 @@
 		bus-range = <0 0>;
 		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
 		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-		          0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
 		sleep = <&pmc 0x00010000>;
 		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8378_rdb.dts b/arch/powerpc/boot/dts/mpc8378_rdb.dts
index 474ea2f..aabf343 100644
--- a/arch/powerpc/boot/dts/mpc8378_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8378_rdb.dts
@@ -394,7 +394,7 @@
 		bus-range = <0 0>;
 		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
 		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-		          0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
 		sleep = <&pmc 0x00010000>;
 		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8379_rdb.dts b/arch/powerpc/boot/dts/mpc8379_rdb.dts
index d4838af..9b1da86 100644
--- a/arch/powerpc/boot/dts/mpc8379_rdb.dts
+++ b/arch/powerpc/boot/dts/mpc8379_rdb.dts
@@ -424,7 +424,7 @@
 		bus-range = <0x0 0x0>;
 		ranges = <0x02000000 0x0 0x90000000 0x90000000 0x0 0x10000000
 		          0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
-		          0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
+		          0x01000000 0x0 0x00000000 0xe0300000 0x0 0x00100000>;
 		sleep = <&pmc 0x00010000>;
 		clock-frequency = <66666666>;
 		#interrupt-cells = <1>;
diff --git a/arch/powerpc/boot/dts/mpc8569mds.dts b/arch/powerpc/boot/dts/mpc8569mds.dts
index a680165..9e4ce99 100644
--- a/arch/powerpc/boot/dts/mpc8569mds.dts
+++ b/arch/powerpc/boot/dts/mpc8569mds.dts
@@ -501,6 +501,10 @@
 				reg = <0x6>;
 				device_type = "ethernet-phy";
 			};
+			tbi-phy@11 {
+				reg = <0x11>;
+				device_type = "tbi-phy";
+			};
 		};
 		mdio@3520 {
 			#address-cells = <1>;
diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig
index 2789397..a2df063 100644
--- a/arch/powerpc/configs/83xx/asp8347_defconfig
+++ b/arch/powerpc/configs/83xx/asp8347_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:05 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:02 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 CONFIG_FSL_EMB_PERFMON=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,6 +56,7 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_REDBOOT=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
@@ -60,6 +64,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -108,7 +113,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -121,9 +125,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -136,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -148,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -190,6 +205,7 @@ CONFIG_PPC_83xx=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 CONFIG_ASP834x=y
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -235,6 +251,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -255,9 +272,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +401,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -490,6 +512,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -525,7 +548,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -545,14 +570,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -599,6 +627,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -618,8 +647,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -786,13 +817,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -847,6 +882,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -900,24 +936,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -960,6 +981,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1069,6 +1091,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1096,6 +1119,10 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1115,10 +1142,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1192,6 +1221,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1287,6 +1317,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1312,22 +1343,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/kmeter1_defconfig b/arch/powerpc/configs/83xx/kmeter1_defconfig
index bf0853f..93ebd44 100644
--- a/arch/powerpc/configs/83xx/kmeter1_defconfig
+++ b/arch/powerpc/configs/83xx/kmeter1_defconfig
@@ -1,25 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.28
-# Fri Apr  3 10:34:33 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:03 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,21 +33,22 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
 CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
 CONFIG_ARCH_MAY_HAVE_PC_FDC=y
 CONFIG_PPC_OF=y
 CONFIG_OF=y
@@ -52,11 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -71,19 +78,30 @@ CONFIG_LOCALVERSION_AUTO=y
 CONFIG_SYSVIPC=y
 CONFIG_SYSVIPC_SYSCTL=y
 CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
 # CONFIG_BSD_PROCESS_ACCT is not set
 # CONFIG_TASKSTATS is not set
 # CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
 # CONFIG_IKCONFIG is not set
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
 # CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
 # CONFIG_SYSFS_DEPRECATED_V2 is not set
 # CONFIG_RELAY is not set
 # CONFIG_NAMESPACES is not set
 # CONFIG_BLK_DEV_INITRD is not set
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
@@ -93,17 +111,23 @@ CONFIG_KALLSYMS_ALL=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
 CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
 CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
 CONFIG_EPOLL=y
 CONFIG_SIGNALFD=y
 CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
 # CONFIG_SLOB is not set
@@ -116,10 +140,15 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
+# CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 # CONFIG_MODULE_FORCE_LOAD is not set
@@ -127,11 +156,8 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -147,14 +173,11 @@ CONFIG_IOSCHED_NOOP=y
 # CONFIG_DEFAULT_CFQ is not set
 CONFIG_DEFAULT_NOOP=y
 CONFIG_DEFAULT_IOSCHED="noop"
-CONFIG_CLASSIC_RCU=y
 # CONFIG_FREEZER is not set
 
 #
 # Platform support
 #
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
 # CONFIG_PPC_CHRP is not set
 # CONFIG_MPC5121_ADS is not set
 # CONFIG_MPC5121_GENERIC is not set
@@ -179,6 +202,8 @@ CONFIG_PPC_83xx=y
 CONFIG_KMETER1=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
 CONFIG_IPIC=y
 # CONFIG_MPIC is not set
 # CONFIG_MPIC_WEIRD is not set
@@ -194,6 +219,8 @@ CONFIG_IPIC=y
 CONFIG_QUICC_ENGINE=y
 # CONFIG_QE_GPIO is not set
 # CONFIG_FSL_ULI1575 is not set
+# CONFIG_SIMPLE_GPIO is not set
+# CONFIG_MCU_MPC8349EMITX is not set
 
 #
 # Kernel options
@@ -212,16 +239,17 @@ CONFIG_SCHED_HRTICK=y
 # CONFIG_PREEMPT_NONE is not set
 # CONFIG_PREEMPT_VOLUNTARY is not set
 CONFIG_PREEMPT=y
-# CONFIG_PREEMPT_RCU is not set
 CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
 # CONFIG_KEXEC is not set
+# CONFIG_CRASH_DUMP is not set
 CONFIG_ARCH_FLATMEM_ENABLE=y
 CONFIG_ARCH_POPULATES_NODE_MAP=y
 CONFIG_SELECT_MEMORY_MODEL=y
@@ -233,12 +261,17 @@ CONFIG_FLAT_NODE_MEM_MAP=y
 CONFIG_PAGEFLAGS_EXTENDED=y
 CONFIG_SPLIT_PTLOCK_CPUS=4
 CONFIG_MIGRATION=y
-# CONFIG_RESOURCES_64BIT is not set
 # CONFIG_PHYS_ADDR_T_64BIT is not set
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
 CONFIG_FORCE_MAX_ZONEORDER=11
 CONFIG_PROC_DEVICETREE=y
 # CONFIG_CMDLINE_BOOL is not set
@@ -331,7 +364,10 @@ CONFIG_LLC=m
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
 
 #
 # Network testing
@@ -342,8 +378,8 @@ CONFIG_LLC=m
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
 # CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
 
@@ -362,6 +398,7 @@ CONFIG_MTD=y
 # CONFIG_MTD_DEBUG is not set
 CONFIG_MTD_CONCAT=y
 CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
 # CONFIG_MTD_REDBOOT_PARTS is not set
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_OF_PARTS=y
@@ -431,6 +468,11 @@ CONFIG_MTD_PHRAM=y
 # CONFIG_MTD_ONENAND is not set
 
 #
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
 # UBI - Unsorted block images
 #
 CONFIG_MTD_UBI=y
@@ -445,7 +487,6 @@ CONFIG_MTD_UBI_DEBUG=y
 # CONFIG_MTD_UBI_DEBUG_MSG is not set
 # CONFIG_MTD_UBI_DEBUG_PARANOID is not set
 # CONFIG_MTD_UBI_DEBUG_DISABLE_BGT is not set
-# CONFIG_MTD_UBI_DEBUG_USERSPACE_IO is not set
 # CONFIG_MTD_UBI_DEBUG_EMULATE_BITFLIPS is not set
 # CONFIG_MTD_UBI_DEBUG_EMULATE_WRITE_FAILURES is not set
 # CONFIG_MTD_UBI_DEBUG_EMULATE_ERASE_FAILURES is not set
@@ -459,6 +500,7 @@ CONFIG_MTD_UBI_DEBUG=y
 # CONFIG_MTD_UBI_DEBUG_MSG_IO is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -505,10 +547,15 @@ CONFIG_MARVELL_PHY=y
 # CONFIG_BROADCOM_PHY is not set
 # CONFIG_ICPLUS_PHY is not set
 # CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
 # CONFIG_FIXED_PHY is not set
 # CONFIG_MDIO_BITBANG is not set
 CONFIG_NET_ETHERNET=y
 CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
 # CONFIG_IBM_NEW_EMAC_ZMII is not set
 # CONFIG_IBM_NEW_EMAC_RGMII is not set
 # CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -517,11 +564,12 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
+CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
-# CONFIG_UGETH_FILTERING is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
 # CONFIG_MV643XX_ETH is not set
 # CONFIG_NETDEV_10000 is not set
@@ -531,7 +579,10 @@ CONFIG_UCC_GETH=y
 #
 # CONFIG_WLAN_PRE80211 is not set
 # CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
 CONFIG_WAN=y
 CONFIG_HDLC=y
 # CONFIG_HDLC_RAW is not set
@@ -543,8 +594,6 @@ CONFIG_HDLC=y
 #
 # X.25/LAPB support is disabled
 #
-CONFIG_HDLC_KM=y
-CONFIG_FS_UCC_HDLC=y
 # CONFIG_DLCI is not set
 CONFIG_PPP=y
 CONFIG_PPP_MULTILINK=y
@@ -600,16 +649,18 @@ CONFIG_SERIAL_CORE_CONSOLE=y
 # CONFIG_SERIAL_OF_PLATFORM is not set
 # CONFIG_SERIAL_QE is not set
 CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
 CONFIG_LEGACY_PTYS=y
 CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
 # CONFIG_IPMI_HANDLER is not set
 CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
 # CONFIG_NVRAM is not set
 # CONFIG_GEN_RTC is not set
 # CONFIG_R3964 is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
-CONFIG_BOOTCOUNT=y
 CONFIG_I2C=y
 CONFIG_I2C_BOARDINFO=y
 CONFIG_I2C_CHARDEV=y
@@ -642,20 +693,20 @@ CONFIG_I2C_MPC=y
 # Miscellaneous I2C Chip support
 #
 # CONFIG_DS1682 is not set
-# CONFIG_AT24 is not set
-# CONFIG_SENSORS_EEPROM is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
-# CONFIG_MCU_MPC8349EMITX is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -677,27 +728,15 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_CORE is not set
 # CONFIG_MFD_SM501 is not set
 # CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_PMIC_DA903X is not set
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -720,11 +759,16 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_EDAC is not set
 # CONFIG_RTC_CLASS is not set
 # CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
 CONFIG_UIO=y
 # CONFIG_UIO_PDRV is not set
 # CONFIG_UIO_PDRV_GENIRQ is not set
 # CONFIG_UIO_SMX is not set
 # CONFIG_UIO_SERCOS3 is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -736,9 +780,12 @@ CONFIG_UIO=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -748,6 +795,11 @@ CONFIG_INOTIFY_USER=y
 # CONFIG_FUSE_FS is not set
 
 #
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
 # CD-ROM/DVD Filesystems
 #
 # CONFIG_ISO9660_FS is not set
@@ -772,10 +824,7 @@ CONFIG_TMPFS=y
 # CONFIG_TMPFS_POSIX_ACL is not set
 # CONFIG_HUGETLB_PAGE is not set
 # CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
 # CONFIG_ADFS_FS is not set
 # CONFIG_AFFS_FS is not set
 # CONFIG_HFS_FS is not set
@@ -796,6 +845,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_JFFS2_RUBIN is not set
 # CONFIG_UBIFS_FS is not set
 # CONFIG_CRAMFS is not set
+# CONFIG_SQUASHFS is not set
 # CONFIG_VXFS_FS is not set
 # CONFIG_MINIX_FS is not set
 # CONFIG_OMFS_FS is not set
@@ -804,6 +854,7 @@ CONFIG_JFFS2_RTIME=y
 # CONFIG_ROMFS_FS is not set
 # CONFIG_SYSV_FS is not set
 # CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
 CONFIG_NETWORK_FILESYSTEMS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
@@ -815,7 +866,6 @@ CONFIG_LOCKD=y
 CONFIG_LOCKD_V4=y
 CONFIG_NFS_COMMON=y
 CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
 # CONFIG_RPCSEC_GSS_KRB5 is not set
 # CONFIG_RPCSEC_GSS_SPKM3 is not set
 # CONFIG_SMB_FS is not set
@@ -845,11 +895,13 @@ CONFIG_PARTITION_ADVANCED=y
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
 
 #
 # Library routines
 #
 CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
 # CONFIG_CRC_CCITT is not set
 # CONFIG_CRC16 is not set
 # CONFIG_CRC_T10DIF is not set
@@ -859,11 +911,12 @@ CONFIG_CRC32=y
 # CONFIG_LIBCRC32C is not set
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
 CONFIG_HAS_IOMEM=y
 CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -883,13 +936,18 @@ CONFIG_DEBUG_FS=y
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
 CONFIG_HAVE_FUNCTION_TRACER=y
-
-#
-# Tracers
-#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+# CONFIG_FTRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
+CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index c5c0fe7..ff33a7d 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:06 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:04 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC831x_RDB=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC831x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +401,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -503,6 +525,7 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -539,7 +562,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -562,10 +587,6 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -583,6 +604,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -591,6 +613,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -610,7 +633,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -643,14 +665,17 @@ CONFIG_MD_RAID1=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -714,6 +739,8 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -735,8 +762,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -924,7 +953,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -938,13 +966,18 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1002,6 +1035,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1056,24 +1090,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1135,6 +1155,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1144,9 +1165,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1235,8 +1256,9 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
@@ -1244,9 +1266,11 @@ CONFIG_USB_GADGET_SELECTED=y
 CONFIG_USB_GADGET_NET2280=y
 CONFIG_USB_NET2280=y
 # CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=y
 CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_GADGETFS is not set
@@ -1298,6 +1322,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1332,6 +1357,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1351,10 +1380,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1428,6 +1459,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1464,7 +1496,46 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 # CONFIG_BINARY_PRINTF is not set
 
@@ -1488,6 +1559,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1518,6 +1590,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1529,7 +1604,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1543,16 +1617,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1560,6 +1633,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index af4952f..76237d4 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:06 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:05 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC831x_RDB=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC831x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +401,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -503,6 +525,7 @@ CONFIG_MTD_NAND_IDS=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -539,7 +562,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -562,10 +587,6 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -583,6 +604,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -591,6 +613,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -610,7 +633,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -704,14 +726,17 @@ CONFIG_MD_RAID1=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -775,6 +800,8 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -796,8 +823,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -985,7 +1014,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -999,13 +1027,18 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1063,6 +1096,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1117,24 +1151,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1196,6 +1216,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1205,9 +1226,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1296,8 +1317,9 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 # CONFIG_USB_GADGET_M66592 is not set
 # CONFIG_USB_GADGET_AMD5536UDC is not set
 # CONFIG_USB_GADGET_FSL_QE is not set
@@ -1305,9 +1327,11 @@ CONFIG_USB_GADGET_SELECTED=y
 CONFIG_USB_GADGET_NET2280=y
 CONFIG_USB_NET2280=y
 # CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=y
 CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_GADGETFS is not set
@@ -1359,6 +1383,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1393,6 +1418,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1412,10 +1441,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1489,6 +1520,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1525,7 +1557,46 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 # CONFIG_BINARY_PRINTF is not set
 
@@ -1549,6 +1620,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1579,6 +1651,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1590,7 +1665,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1604,16 +1678,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1621,6 +1694,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index 8c8f660..e0e36a1 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:07 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:06 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC832x_MDS=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC832x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -235,6 +251,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -255,9 +272,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +401,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -404,6 +426,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -438,7 +461,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -461,10 +486,6 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -482,6 +503,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -490,6 +512,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -509,7 +532,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -532,14 +554,17 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -586,6 +611,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -605,11 +631,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -787,13 +815,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -848,6 +880,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -896,23 +929,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -996,6 +1015,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1023,6 +1043,10 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1042,10 +1066,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1108,6 +1134,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1165,6 +1192,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1190,22 +1218,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index 227dbba..4f27d45 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:08 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:07 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC832x_RDB=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC832x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -235,6 +251,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -255,9 +272,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +401,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -405,6 +427,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -441,7 +464,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -464,10 +489,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -485,6 +506,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -493,6 +515,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -512,7 +535,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -535,14 +557,17 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -590,6 +615,8 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -609,11 +636,13 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -804,7 +833,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -817,13 +845,18 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -881,6 +914,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -935,24 +969,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1014,6 +1034,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1023,9 +1044,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1127,6 +1148,8 @@ CONFIG_MMC_BLOCK_BOUNCE=y
 # CONFIG_MMC_WBSD is not set
 # CONFIG_MMC_TIFM_SD is not set
 CONFIG_MMC_SPI=y
+# CONFIG_MMC_CB710 is not set
+# CONFIG_MMC_VIA_SDMMC is not set
 # CONFIG_MEMSTICK is not set
 # CONFIG_NEW_LEDS is not set
 # CONFIG_ACCESSIBILITY is not set
@@ -1136,6 +1159,10 @@ CONFIG_MMC_SPI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1155,10 +1182,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1224,6 +1253,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1325,6 +1355,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1350,22 +1381,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index 24ee7fc..648dac0 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:09 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:07 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC834x_ITX=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -365,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -382,7 +400,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -487,6 +509,7 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -523,7 +546,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -594,10 +619,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -615,6 +636,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -623,6 +645,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -642,7 +665,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -737,14 +759,17 @@ CONFIG_MD_RAID1=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -791,8 +816,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -960,7 +987,6 @@ CONFIG_I2C_MPC=y
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -973,13 +999,18 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1026,24 +1057,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1085,6 +1102,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1208,6 +1226,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1242,6 +1261,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1261,10 +1284,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1331,6 +1356,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1429,6 +1455,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1454,22 +1481,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index 7f39543..bf6deb8 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:10 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:08 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC834x_ITX=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -365,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -382,7 +400,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -487,6 +509,7 @@ CONFIG_MTD_PHYSMAP=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -523,7 +546,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -546,10 +571,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -567,6 +588,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -575,6 +597,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -594,7 +617,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -617,14 +639,17 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -671,8 +696,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -840,7 +867,6 @@ CONFIG_I2C_MPC=y
 CONFIG_SENSORS_PCF8574=y
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -853,13 +879,18 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 CONFIG_SPI_BITBANG=y
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -906,24 +937,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -965,6 +982,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1087,6 +1105,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1121,6 +1140,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1140,10 +1163,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1210,6 +1235,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1308,6 +1334,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1333,22 +1360,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index 1cd1fca..3236c47 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:11 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:09 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC834x_MDS=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -365,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -382,7 +400,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -403,6 +425,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -437,7 +460,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -457,14 +482,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -527,6 +555,7 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -548,8 +577,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -724,13 +755,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -785,6 +820,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -833,23 +869,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -933,6 +955,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -960,6 +983,10 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -979,10 +1006,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1045,6 +1074,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1100,6 +1130,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1125,22 +1156,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index ce51773..8c5299d 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:12 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:10 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -135,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -147,7 +162,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -189,6 +204,7 @@ CONFIG_MPC836x_MDS=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
 # CONFIG_AMIGAONE is not set
@@ -233,6 +249,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -253,9 +270,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -364,6 +381,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -381,7 +399,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -485,6 +507,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -519,7 +542,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -542,10 +567,6 @@ CONFIG_SCSI_PROC_FS=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -563,6 +584,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -571,6 +593,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -590,7 +613,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -613,14 +635,17 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -667,6 +692,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -686,11 +712,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -868,13 +896,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -929,6 +961,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -977,23 +1010,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1077,6 +1096,7 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1104,6 +1124,10 @@ CONFIG_RTC_DRV_DS1374=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1123,10 +1147,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1190,6 +1216,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1247,6 +1274,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1272,22 +1300,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
index 7f1d138..ff31667 100644
--- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:13 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:12 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -54,12 +57,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -108,7 +113,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -121,9 +125,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -136,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -148,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -190,6 +205,7 @@ CONFIG_MPC836x_RDK=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
 # CONFIG_AMIGAONE is not set
@@ -233,6 +249,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -253,9 +270,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -366,6 +383,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -383,7 +401,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -498,6 +520,7 @@ CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -533,7 +556,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -553,14 +578,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -607,11 +635,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 # CONFIG_GIANFAR is not set
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -777,7 +807,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -791,13 +820,18 @@ CONFIG_SPI_MASTER=y
 #
 CONFIG_SPI_BITBANG=y
 # CONFIG_SPI_GPIO is not set
-CONFIG_SPI_MPC83xx=y
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 CONFIG_SPI_SPIDEV=y
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -865,23 +899,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -990,6 +1011,10 @@ CONFIG_HID=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1009,10 +1034,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1086,6 +1113,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1145,6 +1173,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1170,22 +1199,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index bf636fd..e285ec0 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:12 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:11 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -108,7 +113,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -121,8 +125,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -136,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -148,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -190,6 +205,7 @@ CONFIG_MPC837x_MDS=y
 # CONFIG_MPC837x_RDB is not set
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC837x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -365,6 +382,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -382,7 +400,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -403,6 +425,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -437,7 +460,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -460,10 +485,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -481,6 +502,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -489,6 +511,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -508,7 +531,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -592,14 +614,17 @@ CONFIG_ATA_SFF=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -646,6 +671,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -665,8 +691,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -844,13 +872,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -905,6 +937,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -953,23 +986,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1026,6 +1045,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1045,10 +1068,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1111,6 +1136,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1170,6 +1196,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1193,22 +1220,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index fe6454e..1ab3e4c 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:14 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:13 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -108,7 +113,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -121,8 +125,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -136,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -148,7 +163,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -190,6 +205,7 @@ CONFIG_PPC_83xx=y
 CONFIG_MPC837x_RDB=y
 # CONFIG_SBC834x is not set
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC837x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -254,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -360,6 +377,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -377,7 +395,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -398,6 +420,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -433,7 +456,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -456,10 +481,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -476,6 +497,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -484,6 +506,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -503,7 +526,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -598,14 +620,17 @@ CONFIG_MD_RAID6_PQ=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -652,6 +677,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -671,8 +697,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -842,13 +870,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -903,6 +935,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -956,24 +989,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1011,7 +1029,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1028,10 +1046,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1057,6 +1076,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1141,6 +1161,10 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1160,10 +1184,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1226,6 +1252,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1262,7 +1289,46 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 # CONFIG_BINARY_PRINTF is not set
 
@@ -1285,6 +1351,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1308,22 +1375,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index fe08f67..a592b5e 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:15 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:13 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,12 +56,14 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -107,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -120,8 +124,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -134,6 +145,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -146,7 +161,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -188,6 +203,7 @@ CONFIG_PPC_83xx=y
 # CONFIG_MPC837x_RDB is not set
 CONFIG_SBC834x=y
 # CONFIG_ASP834x is not set
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC834x=y
 # CONFIG_PPC_86xx is not set
 # CONFIG_EMBEDDED6xx is not set
@@ -232,6 +248,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -252,9 +269,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -363,6 +380,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -380,7 +398,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -401,6 +423,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -435,7 +458,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -455,14 +480,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -509,6 +537,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -528,8 +557,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -688,13 +719,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -749,6 +784,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -797,23 +833,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -851,6 +873,10 @@ CONFIG_HID=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -862,10 +888,12 @@ CONFIG_HID=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -928,6 +956,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -971,6 +1000,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -994,22 +1024,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index 09146dd..ff04e10 100644
--- a/arch/powerpc/configs/85xx/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:16 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:14 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -108,7 +111,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -121,8 +123,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -136,6 +145,11 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -143,7 +157,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -176,6 +190,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 CONFIG_KSI8560=y
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -224,6 +239,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -242,9 +258,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -346,6 +362,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -363,7 +380,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -466,6 +487,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -520,7 +542,6 @@ CONFIG_IDE_PROC_FS=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -560,6 +581,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
 CONFIG_FS_ENET_HAS_FCC=y
@@ -567,6 +589,7 @@ CONFIG_FS_ENET_MDIO_FCC=y
 CONFIG_NETDEV_1000=y
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -654,6 +677,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -710,22 +738,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -777,6 +790,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -797,10 +814,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -916,6 +935,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -946,6 +966,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -958,7 +981,6 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -972,16 +994,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -990,9 +1011,13 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index 7b43be7..fb10cc8 100644
--- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:17 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:15 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -111,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -124,8 +126,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -138,6 +147,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -145,7 +158,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -178,6 +191,7 @@ CONFIG_MPC8540_ADS=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -226,6 +240,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -244,9 +259,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -348,6 +363,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -365,7 +381,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -387,6 +407,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -423,7 +444,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -462,9 +482,11 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -555,6 +577,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -590,22 +617,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -657,6 +669,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -676,10 +692,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -794,6 +812,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -824,6 +843,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -835,7 +857,6 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -849,16 +870,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -866,6 +886,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index 62adb71..5c8ce69 100644
--- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:17 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:16 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -112,7 +115,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -125,9 +127,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -141,6 +150,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -148,7 +161,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -181,6 +194,7 @@ CONFIG_MPC8560_ADS=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -229,6 +243,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -247,9 +262,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -360,6 +375,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -377,7 +393,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -400,6 +420,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -431,6 +452,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -450,14 +472,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -504,6 +529,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
@@ -527,8 +553,10 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -646,6 +674,11 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -707,22 +740,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -779,6 +797,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -798,10 +820,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -916,6 +940,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -946,6 +971,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -957,7 +985,6 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -971,16 +998,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -988,6 +1014,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index 41209e3..158e63e 100644
--- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:18 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:17 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -111,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -124,9 +126,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -139,6 +148,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -146,7 +159,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -179,6 +192,7 @@ CONFIG_MPC85xx_CDS=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -227,6 +241,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -245,9 +260,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -358,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -375,7 +391,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -397,6 +417,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -428,6 +449,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -502,14 +524,17 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -556,6 +581,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -575,8 +601,10 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -698,6 +726,11 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -737,22 +770,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -809,6 +827,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -828,10 +850,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -946,6 +970,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -976,6 +1001,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -987,7 +1015,6 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1001,16 +1028,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1018,6 +1044,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index 6c36c9c..2726fca1 100644
--- a/arch/powerpc/configs/85xx/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:19 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:18 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -110,7 +113,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -123,8 +125,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -137,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -144,7 +157,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -177,6 +190,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -224,6 +238,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -242,9 +257,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -354,6 +369,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -371,7 +387,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -391,6 +411,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -422,6 +443,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -441,14 +463,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -495,6 +520,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -514,8 +540,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -637,6 +665,11 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -676,22 +709,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -721,6 +739,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -732,10 +754,12 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -838,6 +862,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -861,22 +886,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index 4aaf1a6..b0c4698 100644
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:20 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:19 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -111,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -124,7 +126,14 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -137,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -144,7 +157,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -177,6 +190,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -224,6 +238,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -242,9 +257,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -346,6 +361,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -363,7 +379,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -385,6 +405,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -421,7 +442,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -460,9 +480,11 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_NETDEV_1000=y
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -551,6 +573,11 @@ CONFIG_LEGACY_PTY_COUNT=256
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -586,22 +613,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -690,6 +702,10 @@ CONFIG_RTC_DRV_M48T59=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -701,10 +717,12 @@ CONFIG_RTC_DRV_M48T59=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -819,6 +837,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -848,6 +867,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -859,7 +881,6 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -873,16 +894,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -890,6 +910,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig
index 7998458..04c85da 100644
--- a/arch/powerpc/configs/85xx/socrates_defconfig
+++ b/arch/powerpc/configs/85xx/socrates_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:21 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:19 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -109,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -122,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -137,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -149,7 +162,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -182,6 +195,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 CONFIG_SOCRATES=y
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -229,6 +243,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -247,9 +262,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -357,6 +372,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -373,6 +389,7 @@ CONFIG_CAN_BCM=y
 # CAN Device Drivers
 #
 # CONFIG_CAN_VCAN is not set
+# CONFIG_CAN_DEV is not set
 # CONFIG_CAN_DEBUG_DEVICES is not set
 # CONFIG_IRDA is not set
 # CONFIG_BT is not set
@@ -382,7 +399,11 @@ CONFIG_WIRELESS=y
 # CONFIG_WIRELESS_OLD_REGULATORY is not set
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -499,6 +520,7 @@ CONFIG_MTD_NAND_SOCRATES=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
 CONFIG_OF_SPI=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -535,7 +557,9 @@ CONFIG_MISC_DEVICES=y
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_AT25 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -558,10 +582,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -588,14 +608,17 @@ CONFIG_SCSI_WAIT_SCAN=m
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -643,6 +666,8 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
+# CONFIG_KS8851 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -662,8 +687,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -733,6 +760,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_AD7879_I2C is not set
 # CONFIG_TOUCHSCREEN_AD7879_SPI is not set
 # CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_EETI is not set
 # CONFIG_TOUCHSCREEN_FUJITSU is not set
 # CONFIG_TOUCHSCREEN_GUNZE is not set
 # CONFIG_TOUCHSCREEN_ELO is not set
@@ -746,6 +774,7 @@ CONFIG_INPUT_TOUCHSCREEN=y
 # CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
 # CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
 # CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_TOUCHSCREEN_W90X900 is not set
 # CONFIG_INPUT_MISC is not set
 
 #
@@ -862,7 +891,6 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
@@ -875,12 +903,18 @@ CONFIG_SPI_MASTER=y
 # SPI Master Controller Drivers
 #
 # CONFIG_SPI_BITBANG is not set
+# CONFIG_SPI_MPC8xxx is not set
 
 #
 # SPI Protocol Masters
 #
 # CONFIG_SPI_SPIDEV is not set
 # CONFIG_SPI_TLE62X0 is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -938,6 +972,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -973,24 +1008,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
+# CONFIG_EZX_PCAP is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1110,7 +1131,7 @@ CONFIG_USB_HID=y
 # CONFIG_HID_CHERRY is not set
 # CONFIG_HID_CHICONY is not set
 # CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 # CONFIG_HID_EZKEY is not set
 # CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
@@ -1124,10 +1145,11 @@ CONFIG_USB_HID=y
 # CONFIG_HID_SAMSUNG is not set
 # CONFIG_HID_SONY is not set
 # CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1153,6 +1175,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1162,9 +1185,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1284,6 +1307,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1318,6 +1342,10 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1337,10 +1365,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1449,7 +1479,46 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 # CONFIG_BINARY_PRINTF is not set
 
@@ -1473,6 +1542,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1498,22 +1568,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index bd1bfcd..e7e81d6 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:22 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:20 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -112,7 +115,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -125,9 +127,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -142,6 +151,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -153,7 +166,7 @@ CONFIG_MODULES=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -186,6 +199,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 CONFIG_STX_GP3=y
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -234,6 +248,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -252,9 +267,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -425,6 +440,7 @@ CONFIG_IP_NF_FILTER=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -442,7 +458,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -466,6 +486,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=m
+CONFIG_OF_MDIO=y
 CONFIG_PARPORT=m
 CONFIG_PARPORT_PC=m
 # CONFIG_PARPORT_PC_FIFO is not set
@@ -507,7 +528,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -581,10 +604,6 @@ CONFIG_BLK_DEV_SR=m
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 # CONFIG_SCSI_LOGGING is not set
@@ -602,6 +621,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -610,6 +630,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -631,7 +652,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_INIA100 is not set
 # CONFIG_SCSI_PPA is not set
 # CONFIG_SCSI_IMM is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -654,14 +674,17 @@ CONFIG_SCSI_LOWLEVEL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -708,6 +731,7 @@ CONFIG_NET_ETHERNET=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_NET_POCKET is not set
 # CONFIG_ATL2 is not set
 # CONFIG_FS_ENET is not set
@@ -729,8 +753,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -802,12 +828,13 @@ CONFIG_INPUT_EVDEV=m
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -821,6 +848,7 @@ CONFIG_MOUSE_PS2_TRACKPOINT=y
 # CONFIG_MOUSE_BCM5974 is not set
 # CONFIG_MOUSE_VSXXXAA is not set
 # CONFIG_MOUSE_GPIO is not set
+# CONFIG_MOUSE_SYNAPTICS_I2C is not set
 # CONFIG_INPUT_JOYSTICK is not set
 # CONFIG_INPUT_TABLET is not set
 # CONFIG_INPUT_TOUCHSCREEN is not set
@@ -911,6 +939,7 @@ CONFIG_I2C_ALGOBIT=m
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 # CONFIG_I2C_CPM is not set
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 # CONFIG_I2C_MPC is not set
 # CONFIG_I2C_OCORES is not set
@@ -941,13 +970,17 @@ CONFIG_I2C_ALGOBIT=m
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -1027,6 +1060,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1060,23 +1094,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1143,6 +1163,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1162,10 +1186,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1316,6 +1342,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1346,6 +1373,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1358,7 +1388,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1372,16 +1401,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1389,6 +1417,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index 7676001..2c40752 100644
--- a/arch/powerpc/configs/85xx/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:23 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:21 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -109,7 +112,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -122,9 +124,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -137,6 +146,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -144,7 +157,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -177,6 +190,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 CONFIG_TQM8540=y
 # CONFIG_TQM8541 is not set
@@ -225,6 +239,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -243,9 +258,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -353,6 +368,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -370,7 +386,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -471,6 +491,7 @@ CONFIG_MTD_CFI_UTIL=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -505,7 +526,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -580,14 +603,17 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -650,6 +676,7 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -671,8 +698,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -850,13 +879,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -911,6 +944,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -945,23 +979,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1018,6 +1038,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1037,10 +1061,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1167,6 +1193,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1192,22 +1219,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index 52fafc0..845731d 100644
--- a/arch/powerpc/configs/85xx/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:23 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:22 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -110,7 +113,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -123,9 +125,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -139,6 +148,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -146,7 +159,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -179,6 +192,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 CONFIG_TQM8541=y
@@ -228,6 +242,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -246,9 +261,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -356,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -373,7 +389,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -475,6 +495,7 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -509,7 +530,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -584,14 +607,17 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -654,6 +680,7 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -676,8 +703,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -831,6 +860,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 # CONFIG_I2C_CPM is not set
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
@@ -859,13 +889,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -944,6 +978,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -979,23 +1014,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1052,6 +1073,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1071,10 +1096,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1201,6 +1228,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1226,22 +1254,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index 8b4faae7..4f228a9 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:24 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:23 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -56,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -111,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -124,9 +126,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -140,6 +149,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -152,7 +165,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -185,6 +198,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -234,6 +248,7 @@ CONFIG_BINFMT_ELF=y
 CONFIG_BINFMT_MISC=y
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -252,9 +267,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -281,6 +296,8 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
@@ -368,6 +385,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -497,6 +515,7 @@ CONFIG_MTD_NAND_FSL_UPM=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -531,7 +550,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -551,14 +572,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -605,6 +629,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -624,8 +649,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -801,13 +828,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -862,6 +893,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -896,23 +928,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -977,6 +995,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1004,6 +1023,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1015,10 +1038,12 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1145,6 +1170,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1175,6 +1201,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1187,7 +1216,6 @@ CONFIG_DEBUG_MUTEXES=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1201,16 +1229,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1218,6 +1245,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index 1703609..9196724 100644
--- a/arch/powerpc/configs/85xx/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:25 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:24 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -110,7 +113,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -123,9 +125,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -139,6 +148,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -146,7 +159,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -179,6 +192,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -228,6 +242,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -246,9 +261,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -356,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -373,7 +389,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -475,6 +495,7 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -509,7 +530,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -584,14 +607,17 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -654,6 +680,7 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -676,8 +703,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -831,6 +860,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 # CONFIG_I2C_CPM is not set
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
@@ -859,13 +889,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -944,6 +978,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -979,23 +1014,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1052,6 +1073,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1071,10 +1096,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1201,6 +1228,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1226,22 +1254,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index f41cc24..2e49a6e 100644
--- a/arch/powerpc/configs/85xx/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:26 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:25 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -110,7 +113,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -123,9 +125,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -139,6 +148,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -146,7 +159,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -179,6 +192,7 @@ CONFIG_MPC85xx=y
 # CONFIG_MPC85xx_DS is not set
 # CONFIG_SOCRATES is not set
 # CONFIG_KSI8560 is not set
+# CONFIG_XES_MPC85xx is not set
 # CONFIG_STX_GP3 is not set
 # CONFIG_TQM8540 is not set
 # CONFIG_TQM8541 is not set
@@ -228,6 +242,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -246,9 +261,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -356,6 +371,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -373,7 +389,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -475,6 +495,7 @@ CONFIG_MTD_CFI_UTIL=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -509,7 +530,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -584,14 +607,17 @@ CONFIG_BLK_DEV_IDEDMA=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -654,6 +680,7 @@ CONFIG_E100=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -676,8 +703,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -831,6 +860,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 # CONFIG_I2C_CPM is not set
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
@@ -859,13 +889,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -944,6 +978,7 @@ CONFIG_SENSORS_LM75=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -979,23 +1014,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1052,6 +1073,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1071,10 +1096,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1201,6 +1228,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1226,22 +1254,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
index 2552cbe..1025da2 100644
--- a/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
+++ b/arch/powerpc/configs/85xx/xes_mpc85xx_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc6
-# Thu Jun 11 11:25:17 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:25 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -35,15 +35,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -64,6 +65,7 @@ CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -114,7 +116,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -127,9 +128,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -144,6 +152,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -157,7 +169,7 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -239,6 +251,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -258,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -287,6 +300,8 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 CONFIG_PCI_MSI=y
@@ -404,6 +419,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -540,6 +556,7 @@ CONFIG_MTD_NAND_FSL_UPM=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -575,7 +592,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -599,10 +618,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
@@ -619,6 +634,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -627,6 +643,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -646,7 +663,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -730,14 +746,17 @@ CONFIG_PATA_ALI=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -784,6 +803,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -803,8 +823,10 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -986,13 +1008,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_DS1682 is not set
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -1072,6 +1098,7 @@ CONFIG_SENSORS_LM90=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1126,23 +1153,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1187,7 +1200,7 @@ CONFIG_USB_HID=y
 # CONFIG_HID_CHERRY is not set
 # CONFIG_HID_CHICONY is not set
 # CONFIG_HID_CYPRESS is not set
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 # CONFIG_HID_EZKEY is not set
 # CONFIG_HID_KYE is not set
 # CONFIG_HID_GYRATION is not set
@@ -1201,10 +1214,11 @@ CONFIG_USB_HID=y
 # CONFIG_HID_SAMSUNG is not set
 # CONFIG_HID_SONY is not set
 # CONFIG_HID_SUNPLUS is not set
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1230,6 +1244,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 # CONFIG_USB_EHCI_HCD is not set
 # CONFIG_USB_OXU210HP_HCD is not set
 # CONFIG_USB_ISP116X_HCD is not set
@@ -1325,7 +1340,7 @@ CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_GPIO_PLATFORM=y
 CONFIG_LEDS_GPIO_OF=y
-# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_LP3944 is not set
 CONFIG_LEDS_PCA955X=y
 # CONFIG_LEDS_BD2802 is not set
 
@@ -1352,8 +1367,6 @@ CONFIG_EDAC=y
 # CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_MPC85XX=y
-# CONFIG_EDAC_AMD8131 is not set
-# CONFIG_EDAC_AMD8111 is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1385,6 +1398,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1425,6 +1439,10 @@ CONFIG_NET_DMA=y
 # CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1444,11 +1462,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1629,6 +1648,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1659,6 +1679,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1671,7 +1694,6 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1685,16 +1707,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1702,6 +1723,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index b6a23af..527ad1a 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:31 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:31 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PPC32=y
@@ -32,16 +34,17 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_LOCKBREAK=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -56,11 +59,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -112,9 +117,7 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -127,8 +130,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -143,6 +153,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -156,7 +170,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -216,7 +230,7 @@ CONFIG_MPIC=y
 #
 # Kernel options
 #
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -235,6 +249,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -256,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -285,14 +300,32 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
-CONFIG_PCI_DEBUG=y
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PCMCIA_IOCTL is not set
+# CONFIG_CARDBUS is not set
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+CONFIG_YENTA_TI=y
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCCARD_NONSTATIC=y
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
@@ -353,8 +386,8 @@ CONFIG_INET_XFRM_TUNNEL=m
 CONFIG_INET_TUNNEL=m
 CONFIG_INET_XFRM_MODE_TRANSPORT=y
 CONFIG_INET_XFRM_MODE_TUNNEL=y
-CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+CONFIG_INET_LRO=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
 # CONFIG_TCP_CONG_ADVANCED is not set
@@ -380,174 +413,26 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 CONFIG_IPV6_TUNNEL=m
 # CONFIG_IPV6_MULTIPLE_TABLES is not set
 # CONFIG_IPV6_MROUTE is not set
-# CONFIG_NETLABEL is not set
 # CONFIG_NETWORK_SECMARK is not set
-CONFIG_NETFILTER=y
-# CONFIG_NETFILTER_DEBUG is not set
-CONFIG_NETFILTER_ADVANCED=y
-CONFIG_BRIDGE_NETFILTER=y
-
-#
-# Core Netfilter Configuration
-#
-# CONFIG_NETFILTER_NETLINK_QUEUE is not set
-# CONFIG_NETFILTER_NETLINK_LOG is not set
-# CONFIG_NF_CONNTRACK is not set
-# CONFIG_NETFILTER_TPROXY is not set
-CONFIG_NETFILTER_XTABLES=m
-# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
-# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
-# CONFIG_NETFILTER_XT_TARGET_HL is not set
-# CONFIG_NETFILTER_XT_TARGET_MARK is not set
-# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
-# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
-# CONFIG_NETFILTER_XT_TARGET_RATEEST is not set
-# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
-# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
-# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
-# CONFIG_NETFILTER_XT_MATCH_DCCP is not set
-# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
-# CONFIG_NETFILTER_XT_MATCH_ESP is not set
-# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
-CONFIG_NETFILTER_XT_MATCH_HL=m
-# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
-# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
-# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
-# CONFIG_NETFILTER_XT_MATCH_MAC is not set
-# CONFIG_NETFILTER_XT_MATCH_MARK is not set
-# CONFIG_NETFILTER_XT_MATCH_MULTIPORT is not set
-# CONFIG_NETFILTER_XT_MATCH_OWNER is not set
-# CONFIG_NETFILTER_XT_MATCH_POLICY is not set
-# CONFIG_NETFILTER_XT_MATCH_PHYSDEV is not set
-# CONFIG_NETFILTER_XT_MATCH_PKTTYPE is not set
-# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set
-# CONFIG_NETFILTER_XT_MATCH_RATEEST is not set
-# CONFIG_NETFILTER_XT_MATCH_REALM is not set
-# CONFIG_NETFILTER_XT_MATCH_RECENT is not set
-# CONFIG_NETFILTER_XT_MATCH_SCTP is not set
-# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set
-# CONFIG_NETFILTER_XT_MATCH_STRING is not set
-# CONFIG_NETFILTER_XT_MATCH_TCPMSS is not set
-# CONFIG_NETFILTER_XT_MATCH_TIME is not set
-# CONFIG_NETFILTER_XT_MATCH_U32 is not set
-# CONFIG_IP_VS is not set
-
-#
-# IP: Netfilter Configuration
-#
-# CONFIG_NF_DEFRAG_IPV4 is not set
-CONFIG_IP_NF_QUEUE=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_ADDRTYPE=m
-# CONFIG_IP_NF_MATCH_AH is not set
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_LOG=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_ECN=m
-# CONFIG_IP_NF_TARGET_TTL is not set
-CONFIG_IP_NF_RAW=m
-# CONFIG_IP_NF_SECURITY is not set
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-
-#
-# IPv6: Netfilter Configuration
-#
-CONFIG_IP6_NF_QUEUE=m
-CONFIG_IP6_NF_IPTABLES=m
-# CONFIG_IP6_NF_MATCH_AH is not set
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-# CONFIG_IP6_NF_MATCH_MH is not set
-CONFIG_IP6_NF_MATCH_RT=m
-# CONFIG_IP6_NF_TARGET_HL is not set
-CONFIG_IP6_NF_TARGET_LOG=m
-CONFIG_IP6_NF_FILTER=m
-# CONFIG_IP6_NF_TARGET_REJECT is not set
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-# CONFIG_IP6_NF_SECURITY is not set
-# CONFIG_BRIDGE_NF_EBTABLES is not set
+# CONFIG_NETFILTER is not set
 # CONFIG_IP_DCCP is not set
-CONFIG_IP_SCTP=m
-# CONFIG_SCTP_DBG_MSG is not set
-# CONFIG_SCTP_DBG_OBJCNT is not set
-# CONFIG_SCTP_HMAC_NONE is not set
-# CONFIG_SCTP_HMAC_SHA1 is not set
-CONFIG_SCTP_HMAC_MD5=y
-CONFIG_TIPC=m
-# CONFIG_TIPC_ADVANCED is not set
-# CONFIG_TIPC_DEBUG is not set
-CONFIG_ATM=m
-CONFIG_ATM_CLIP=m
-# CONFIG_ATM_CLIP_NO_ICMP is not set
-CONFIG_ATM_LANE=m
-CONFIG_ATM_MPOA=m
-CONFIG_ATM_BR2684=m
-# CONFIG_ATM_BR2684_IPFILTER is not set
-CONFIG_STP=m
-CONFIG_BRIDGE=m
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
 # CONFIG_NET_DSA is not set
-CONFIG_VLAN_8021Q=m
-# CONFIG_VLAN_8021Q_GVRP is not set
+# CONFIG_VLAN_8021Q is not set
 # CONFIG_DECNET is not set
-CONFIG_LLC=m
 # CONFIG_LLC2 is not set
 # CONFIG_IPX is not set
 # CONFIG_ATALK is not set
 # CONFIG_X25 is not set
 # CONFIG_LAPB is not set
 # CONFIG_ECONET is not set
-CONFIG_WAN_ROUTER=m
+# CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
-CONFIG_NET_SCHED=y
-
-#
-# Queueing/Scheduling
-#
-CONFIG_NET_SCH_CBQ=m
-CONFIG_NET_SCH_HTB=m
-CONFIG_NET_SCH_HFSC=m
-CONFIG_NET_SCH_ATM=m
-CONFIG_NET_SCH_PRIO=m
-# CONFIG_NET_SCH_MULTIQ is not set
-CONFIG_NET_SCH_RED=m
-CONFIG_NET_SCH_SFQ=m
-CONFIG_NET_SCH_TEQL=m
-CONFIG_NET_SCH_TBF=m
-CONFIG_NET_SCH_GRED=m
-CONFIG_NET_SCH_DSMARK=m
-CONFIG_NET_SCH_NETEM=m
-# CONFIG_NET_SCH_DRR is not set
-
-#
-# Classification
-#
-CONFIG_NET_CLS=y
-# CONFIG_NET_CLS_BASIC is not set
-CONFIG_NET_CLS_TCINDEX=m
-CONFIG_NET_CLS_ROUTE4=m
-CONFIG_NET_CLS_ROUTE=y
-CONFIG_NET_CLS_FW=m
-CONFIG_NET_CLS_U32=m
-# CONFIG_CLS_U32_PERF is not set
-# CONFIG_CLS_U32_MARK is not set
-CONFIG_NET_CLS_RSVP=m
-CONFIG_NET_CLS_RSVP6=m
-# CONFIG_NET_CLS_FLOW is not set
-# CONFIG_NET_EMATCH is not set
-# CONFIG_NET_CLS_ACT is not set
-# CONFIG_NET_CLS_IND is not set
-CONFIG_NET_SCH_FIFO=y
+# CONFIG_IEEE802154 is not set
+# CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
 #
@@ -560,12 +445,7 @@ CONFIG_NET_PKTGEN=m
 # CONFIG_BT is not set
 # CONFIG_AF_RXRPC is not set
 CONFIG_FIB_RULES=y
-CONFIG_WIRELESS=y
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_OLD_REGULATORY=y
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+# CONFIG_WIRELESS is not set
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -580,9 +460,9 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_DEVRES is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -672,6 +552,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -707,9 +588,60 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
 
 #
 # SCSI device support
@@ -731,10 +663,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -751,6 +679,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -759,6 +688,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -778,7 +708,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -791,6 +720,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
@@ -842,6 +772,7 @@ CONFIG_SATA_SIL=y
 # CONFIG_PATA_NS87415 is not set
 # CONFIG_PATA_OPTI is not set
 # CONFIG_PATA_OPTIDMA is not set
+# CONFIG_PATA_PCMCIA is not set
 # CONFIG_PATA_PDC_OLD is not set
 # CONFIG_PATA_RADISYS is not set
 # CONFIG_PATA_RZ1000 is not set
@@ -862,14 +793,17 @@ CONFIG_SATA_SIL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -916,6 +850,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -935,8 +870,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -963,22 +900,8 @@ CONFIG_GIANFAR=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
 # CONFIG_WAN is not set
-CONFIG_ATM_DRIVERS=y
-# CONFIG_ATM_DUMMY is not set
-# CONFIG_ATM_TCP is not set
-# CONFIG_ATM_LANAI is not set
-# CONFIG_ATM_ENI is not set
-# CONFIG_ATM_FIRESTREAM is not set
-# CONFIG_ATM_ZATM is not set
-# CONFIG_ATM_NICSTAR is not set
-# CONFIG_ATM_IDT77252 is not set
-# CONFIG_ATM_AMBASSADOR is not set
-# CONFIG_ATM_HORIZON is not set
-# CONFIG_ATM_IA is not set
-# CONFIG_ATM_FORE200E is not set
-# CONFIG_ATM_HE is not set
-# CONFIG_ATM_SOLOS is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
 CONFIG_PPP=m
@@ -990,7 +913,6 @@ CONFIG_PPP_DEFLATE=m
 CONFIG_PPP_BSDCOMP=m
 # CONFIG_PPP_MPPE is not set
 CONFIG_PPPOE=m
-CONFIG_PPPOATM=m
 # CONFIG_PPPOL2TP is not set
 CONFIG_SLIP=m
 CONFIG_SLIP_COMPRESSED=y
@@ -1010,7 +932,7 @@ CONFIG_NET_POLL_CONTROLLER=y
 # Input device support
 #
 CONFIG_INPUT=y
-CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_FF_MEMLESS is not set
 # CONFIG_INPUT_POLLDEV is not set
 
 #
@@ -1058,6 +980,7 @@ CONFIG_DEVKMEM=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
+# CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -1080,6 +1003,14 @@ CONFIG_HW_RANDOM=y
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
@@ -1143,18 +1074,21 @@ CONFIG_DS1682=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
-# CONFIG_DEBUG_GPIO is not set
-# CONFIG_GPIO_SYSFS is not set
+CONFIG_GPIO_SYSFS=y
 
 #
 # Memory mapped GPIO expanders:
@@ -1229,6 +1163,7 @@ CONFIG_SENSORS_LM92=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1284,24 +1219,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1346,7 +1266,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1363,10 +1283,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1392,6 +1313,7 @@ CONFIG_USB=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1401,6 +1323,8 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1475,7 +1399,6 @@ CONFIG_USB_STORAGE=y
 # CONFIG_USB_IOWARRIOR is not set
 # CONFIG_USB_ISIGHTFW is not set
 # CONFIG_USB_VST is not set
-# CONFIG_USB_ATM is not set
 # CONFIG_USB_GADGET is not set
 
 #
@@ -1521,6 +1444,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 CONFIG_RTC_DRV_RX8581=y
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1548,6 +1472,10 @@ CONFIG_RTC_DRV_RX8581=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1569,10 +1497,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1589,8 +1519,11 @@ CONFIG_INOTIFY_USER=y
 #
 # CD-ROM/DVD Filesystems
 #
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_UDF_FS=y
+CONFIG_UDF_NLS=y
 
 #
 # DOS/FAT/NT Filesystems
@@ -1598,8 +1531,8 @@ CONFIG_INOTIFY_USER=y
 CONFIG_FAT_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+CONFIG_FAT_DEFAULT_CODEPAGE=850
+CONFIG_FAT_DEFAULT_IOCHARSET="ascii"
 # CONFIG_NTFS_FS is not set
 
 #
@@ -1649,6 +1582,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1723,13 +1657,13 @@ CONFIG_NLS_UTF8=m
 #
 CONFIG_BITREVERSE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
-CONFIG_CRC_CCITT=m
+CONFIG_CRC_CCITT=y
 # CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_T10DIF=y
+CONFIG_CRC_ITU_T=y
 CONFIG_CRC32=y
 # CONFIG_CRC7 is not set
-CONFIG_LIBCRC32C=m
+CONFIG_LIBCRC32C=y
 CONFIG_ZLIB_INFLATE=y
 CONFIG_ZLIB_DEFLATE=y
 CONFIG_DECOMPRESS_GZIP=y
@@ -1738,6 +1672,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1750,75 +1685,24 @@ CONFIG_MAGIC_SYSRQ=y
 # CONFIG_UNUSED_SYMBOLS is not set
 # CONFIG_DEBUG_FS is not set
 # CONFIG_HEADERS_CHECK is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_SHIRQ is not set
-CONFIG_DETECT_SOFTLOCKUP=y
-# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
-CONFIG_DETECT_HUNG_TASK=y
-# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
-CONFIG_SCHED_DEBUG=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_DEBUG_OBJECTS is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_KERNEL is not set
 # CONFIG_DEBUG_BUGVERBOSE is not set
-CONFIG_DEBUG_INFO=y
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DEBUG_WRITECOUNT is not set
 # CONFIG_DEBUG_MEMORY_INIT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
-# CONFIG_BACKTRACE_SELF_TEST is not set
-# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
-# CONFIG_FAULT_INJECTION is not set
 # CONFIG_LATENCYTOP is not set
 CONFIG_SYSCTL_SYSCALL_CHECK=y
-# CONFIG_DEBUG_PAGEALLOC is not set
 CONFIG_HAVE_FUNCTION_TRACER=y
 CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
-# CONFIG_DEBUG_STACKOVERFLOW is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_CODE_PATCHING_SELFTEST is not set
-# CONFIG_FTR_FIXUP_SELFTEST is not set
-# CONFIG_MSI_BITMAP_SELFTEST is not set
-# CONFIG_XMON is not set
 # CONFIG_IRQSTACKS is not set
-# CONFIG_BDI_SWITCH is not set
 # CONFIG_BOOTX_TEXT is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
 
@@ -1826,15 +1710,9 @@ CONFIG_PRINT_STACK_DEPTH=64
 # Security options
 #
 # CONFIG_KEYS is not set
-CONFIG_SECURITY=y
+# CONFIG_SECURITY is not set
 # CONFIG_SECURITYFS is not set
-CONFIG_SECURITY_NETWORK=y
-# CONFIG_SECURITY_NETWORK_XFRM is not set
-# CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
-# CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
 #
@@ -1854,11 +1732,11 @@ CONFIG_CRYPTO_PCOMP=y
 CONFIG_CRYPTO_MANAGER=y
 CONFIG_CRYPTO_MANAGER2=y
 # CONFIG_CRYPTO_GF128MUL is not set
-CONFIG_CRYPTO_NULL=m
+# CONFIG_CRYPTO_NULL is not set
 CONFIG_CRYPTO_WORKQUEUE=y
 # CONFIG_CRYPTO_CRYPTD is not set
 CONFIG_CRYPTO_AUTHENC=m
-CONFIG_CRYPTO_TEST=m
+# CONFIG_CRYPTO_TEST is not set
 
 #
 # Authenticated Encryption with Associated Data
@@ -1873,53 +1751,52 @@ CONFIG_CRYPTO_TEST=m
 CONFIG_CRYPTO_CBC=y
 # CONFIG_CRYPTO_CTR is not set
 # CONFIG_CRYPTO_CTS is not set
-CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_ECB is not set
 # CONFIG_CRYPTO_LRW is not set
-CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_PCBC is not set
 # CONFIG_CRYPTO_XTS is not set
 
 #
 # Hash modes
 #
-CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_HMAC=m
 # CONFIG_CRYPTO_XCBC is not set
 
 #
 # Digest
 #
-CONFIG_CRYPTO_CRC32C=m
-CONFIG_CRYPTO_MD4=m
+CONFIG_CRYPTO_CRC32C=y
+# CONFIG_CRYPTO_MD4 is not set
 CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_MICHAEL_MIC=m
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
 # CONFIG_CRYPTO_RMD128 is not set
 # CONFIG_CRYPTO_RMD160 is not set
 # CONFIG_CRYPTO_RMD256 is not set
 # CONFIG_CRYPTO_RMD320 is not set
 CONFIG_CRYPTO_SHA1=m
-CONFIG_CRYPTO_SHA256=m
-CONFIG_CRYPTO_SHA512=m
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
 # CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_WP512=m
+# CONFIG_CRYPTO_WP512 is not set
 
 #
 # Ciphers
 #
-CONFIG_CRYPTO_AES=m
-CONFIG_CRYPTO_ANUBIS=m
-CONFIG_CRYPTO_ARC4=m
-CONFIG_CRYPTO_BLOWFISH=m
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
 # CONFIG_CRYPTO_CAMELLIA is not set
-CONFIG_CRYPTO_CAST5=m
-CONFIG_CRYPTO_CAST6=m
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
 CONFIG_CRYPTO_DES=y
 # CONFIG_CRYPTO_FCRYPT is not set
-CONFIG_CRYPTO_KHAZAD=m
+# CONFIG_CRYPTO_KHAZAD is not set
 # CONFIG_CRYPTO_SALSA20 is not set
 # CONFIG_CRYPTO_SEED is not set
-CONFIG_CRYPTO_SERPENT=m
-CONFIG_CRYPTO_TEA=m
-CONFIG_CRYPTO_TWOFISH=m
-CONFIG_CRYPTO_TWOFISH_COMMON=m
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
 
 #
 # Compression
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index a66910e..cd338d4 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:29 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:29 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PPC32=y
@@ -32,16 +34,17 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_LOCKBREAK=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -56,11 +59,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -91,7 +96,11 @@ CONFIG_CLASSIC_RCU=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_GROUP_SCHED is not set
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
 # CONFIG_CGROUPS is not set
 CONFIG_SYSFS_DEPRECATED=y
 CONFIG_SYSFS_DEPRECATED_V2=y
@@ -109,7 +118,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -122,8 +130,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -138,6 +153,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -151,7 +170,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -168,7 +187,6 @@ CONFIG_DEFAULT_CFQ=y
 # CONFIG_DEFAULT_NOOP is not set
 CONFIG_DEFAULT_IOSCHED="cfq"
 # CONFIG_FREEZER is not set
-CONFIG_PPC_MSI_BITMAP=y
 
 #
 # Platform support
@@ -212,7 +230,7 @@ CONFIG_MPIC=y
 #
 # Kernel options
 #
-# CONFIG_HIGHMEM is not set
+CONFIG_HIGHMEM=y
 CONFIG_TICK_ONESHOT=y
 # CONFIG_NO_HZ is not set
 CONFIG_HIGH_RES_TIMERS=y
@@ -231,6 +249,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -252,9 +271,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -281,13 +300,32 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
-CONFIG_PCI_MSI=y
+# CONFIG_PCI_MSI is not set
 # CONFIG_PCI_LEGACY is not set
 # CONFIG_PCI_STUB is not set
 # CONFIG_PCI_IOV is not set
-# CONFIG_PCCARD is not set
+CONFIG_PCCARD=y
+# CONFIG_PCMCIA_DEBUG is not set
+CONFIG_PCMCIA=y
+# CONFIG_PCMCIA_LOAD_CIS is not set
+# CONFIG_PCMCIA_IOCTL is not set
+# CONFIG_CARDBUS is not set
+
+#
+# PC-card bridges
+#
+CONFIG_YENTA=y
+# CONFIG_YENTA_O2 is not set
+# CONFIG_YENTA_RICOH is not set
+CONFIG_YENTA_TI=y
+# CONFIG_YENTA_TOSHIBA is not set
+# CONFIG_PD6729 is not set
+# CONFIG_I82092 is not set
+CONFIG_PCCARD_NONSTATIC=y
 # CONFIG_HOTPLUG_PCI is not set
 # CONFIG_HAS_RAPIDIO is not set
 
@@ -393,6 +431,7 @@ CONFIG_IPV6_TUNNEL=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -421,7 +460,9 @@ CONFIG_FIB_RULES=y
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
 CONFIG_STANDALONE=y
 CONFIG_PREVENT_FIRMWARE_BUILD=y
-# CONFIG_FW_LOADER is not set
+CONFIG_FW_LOADER=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_SYS_HYPERVISOR is not set
 # CONFIG_CONNECTOR is not set
 CONFIG_MTD=y
@@ -511,6 +552,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -546,9 +588,60 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
+CONFIG_IDE=y
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+CONFIG_BLK_DEV_IDECS=y
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+
+#
+# PCI IDE chipsets support
+#
+# CONFIG_BLK_DEV_GENERIC is not set
+# CONFIG_BLK_DEV_OPTI621 is not set
+# CONFIG_BLK_DEV_AEC62XX is not set
+# CONFIG_BLK_DEV_ALI15X3 is not set
+# CONFIG_BLK_DEV_AMD74XX is not set
+# CONFIG_BLK_DEV_CMD64X is not set
+# CONFIG_BLK_DEV_TRIFLEX is not set
+# CONFIG_BLK_DEV_CS5520 is not set
+# CONFIG_BLK_DEV_CS5530 is not set
+# CONFIG_BLK_DEV_HPT366 is not set
+# CONFIG_BLK_DEV_JMICRON is not set
+# CONFIG_BLK_DEV_SC1200 is not set
+# CONFIG_BLK_DEV_PIIX is not set
+# CONFIG_BLK_DEV_IT8172 is not set
+# CONFIG_BLK_DEV_IT8213 is not set
+# CONFIG_BLK_DEV_IT821X is not set
+# CONFIG_BLK_DEV_NS87415 is not set
+# CONFIG_BLK_DEV_PDC202XX_OLD is not set
+# CONFIG_BLK_DEV_PDC202XX_NEW is not set
+# CONFIG_BLK_DEV_SVWKS is not set
+# CONFIG_BLK_DEV_SIIMAGE is not set
+# CONFIG_BLK_DEV_SL82C105 is not set
+# CONFIG_BLK_DEV_SLC90E66 is not set
+# CONFIG_BLK_DEV_TRM290 is not set
+# CONFIG_BLK_DEV_VIA82CXXX is not set
+# CONFIG_BLK_DEV_TC86C001 is not set
+# CONFIG_BLK_DEV_IDEDMA is not set
 
 #
 # SCSI device support
@@ -570,10 +663,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -590,6 +679,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -598,6 +688,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -617,7 +708,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -630,6 +720,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_NSP32 is not set
 # CONFIG_SCSI_DEBUG is not set
 # CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_LOWLEVEL_PCMCIA is not set
 # CONFIG_SCSI_DH is not set
 # CONFIG_SCSI_OSD_INITIATOR is not set
 CONFIG_ATA=y
@@ -647,14 +738,17 @@ CONFIG_SATA_SIL24=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -701,6 +795,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -720,8 +815,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -748,6 +845,7 @@ CONFIG_GIANFAR=y
 # CONFIG_USB_PEGASUS is not set
 # CONFIG_USB_RTL8150 is not set
 # CONFIG_USB_USBNET is not set
+# CONFIG_NET_PCMCIA is not set
 # CONFIG_WAN is not set
 # CONFIG_FDDI is not set
 # CONFIG_HIPPI is not set
@@ -827,6 +925,7 @@ CONFIG_DEVKMEM=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_SERIAL_8250_PCI is not set
+# CONFIG_SERIAL_8250_CS is not set
 CONFIG_SERIAL_8250_NR_UARTS=2
 CONFIG_SERIAL_8250_RUNTIME_UARTS=2
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -849,6 +948,14 @@ CONFIG_HW_RANDOM=y
 CONFIG_NVRAM=y
 # CONFIG_R3964 is not set
 # CONFIG_APPLICOM is not set
+
+#
+# PCMCIA character devices
+#
+# CONFIG_SYNCLINK_CS is not set
+# CONFIG_CARDMAN_4000 is not set
+# CONFIG_CARDMAN_4040 is not set
+# CONFIG_IPWIRELESS is not set
 # CONFIG_RAW_DRIVER is not set
 # CONFIG_TCG_TPM is not set
 CONFIG_DEVPORT=y
@@ -912,13 +1019,17 @@ CONFIG_DS1682=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -997,6 +1108,7 @@ CONFIG_SENSORS_LM92=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1052,24 +1164,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1114,7 +1211,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1131,10 +1228,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-# CONFIG_THRUSTMASTER_FF is not set
-# CONFIG_ZEROPLUS_FF is not set
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1160,6 +1258,7 @@ CONFIG_USB=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1169,6 +1268,8 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1288,6 +1389,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 CONFIG_RTC_DRV_RX8581=y
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1315,6 +1417,10 @@ CONFIG_RTC_DRV_RX8581=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1336,10 +1442,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1419,6 +1527,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1508,6 +1617,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1531,23 +1641,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index c6a7fc8..ba47883 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:30 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:30 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PPC32=y
@@ -32,16 +34,17 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_LOCKBREAK=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -56,11 +59,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -114,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -127,8 +131,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -143,6 +154,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -156,7 +171,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -235,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -256,9 +272,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -285,6 +301,8 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
@@ -510,6 +528,7 @@ CONFIG_LLC=m
 # CONFIG_ECONET is not set
 CONFIG_WAN_ROUTER=m
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -566,7 +585,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -678,6 +701,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -713,7 +737,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -737,10 +763,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -757,6 +779,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -765,6 +788,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -784,7 +808,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -868,14 +891,17 @@ CONFIG_SATA_SIL=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -922,6 +948,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -941,8 +968,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -1149,13 +1178,17 @@ CONFIG_DS1682=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -1235,6 +1268,7 @@ CONFIG_SENSORS_LM92=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1290,24 +1324,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1352,7 +1371,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1369,10 +1388,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1398,6 +1418,7 @@ CONFIG_USB=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1407,6 +1428,8 @@ CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1527,6 +1550,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 CONFIG_RTC_DRV_RX8581=y
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1554,6 +1578,10 @@ CONFIG_RTC_DRV_RX8581=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1575,10 +1603,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1645,6 +1675,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1734,6 +1765,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1759,10 +1791,14 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1774,7 +1810,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1788,17 +1823,16 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1806,6 +1840,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
@@ -1829,7 +1866,6 @@ CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
 # CONFIG_SECURITY_ROOTPLUG is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 # CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
index cfd2efc..a61f183 100644
--- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:28 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:27 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -53,11 +56,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -109,7 +114,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -122,9 +126,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -138,6 +149,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -150,7 +165,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -230,6 +245,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -250,9 +266,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -279,6 +295,8 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
@@ -381,6 +399,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -398,7 +417,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -549,7 +572,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -620,10 +645,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -640,6 +661,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -648,6 +670,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -667,7 +690,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -751,14 +773,17 @@ CONFIG_PATA_ALI=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -792,6 +817,7 @@ CONFIG_ULI526X=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 # CONFIG_NETDEV_1000 is not set
 # CONFIG_NETDEV_10000 is not set
@@ -959,13 +985,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -993,23 +1023,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1106,6 +1122,11 @@ CONFIG_SND_PCM_OSS_PLUGINS=y
 CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
 # CONFIG_SND_MTPAV is not set
@@ -1130,6 +1151,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1160,6 +1182,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_INTEL8X0 is not set
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1251,6 +1274,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1278,6 +1302,10 @@ CONFIG_RTC_DRV_CMOS=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1297,12 +1325,15 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -1464,6 +1495,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1494,6 +1526,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1506,7 +1541,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1520,16 +1554,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1537,6 +1570,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index 0bee3e3..7016ce7 100644
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:28 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:28 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PPC32=y
@@ -32,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -54,11 +57,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -113,7 +118,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -126,9 +130,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -143,6 +154,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -156,7 +171,7 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -234,7 +249,9 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
-# CONFIG_IOMMU_HELPER is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_SWIOTLB=y
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -256,9 +273,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -401,6 +418,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -419,7 +437,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -444,6 +466,7 @@ CONFIG_EXTRA_FIRMWARE=""
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -479,7 +502,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -503,10 +528,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
@@ -524,6 +545,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -532,6 +554,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -551,7 +574,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -635,14 +657,17 @@ CONFIG_PATA_ALI=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -689,6 +714,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -708,8 +734,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -909,13 +937,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -943,76 +975,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1052,6 +1017,11 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_AC97_CODEC=y
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
@@ -1078,6 +1048,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1108,6 +1079,7 @@ CONFIG_SND_PCI=y
 CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1152,7 +1124,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1169,10 +1141,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1198,6 +1171,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1207,9 +1181,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1329,6 +1303,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1356,6 +1331,10 @@ CONFIG_RTC_DRV_CMOS=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1375,11 +1354,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1454,6 +1434,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
@@ -1555,6 +1536,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1585,6 +1567,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1597,7 +1582,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1611,16 +1595,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1628,6 +1611,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
index c30a0c7..f5ca2e0 100644
--- a/arch/powerpc/configs/86xx/sbc8641d_defconfig
+++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:27 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:26 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PPC32=y
@@ -32,16 +34,17 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_GENERIC_LOCKBREAK=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -55,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -113,7 +118,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -126,8 +130,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -142,6 +153,11 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -155,7 +171,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -234,6 +250,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -255,9 +272,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -284,6 +301,8 @@ CONFIG_PCI_DOMAINS=y
 CONFIG_PCI_SYSCALL=y
 CONFIG_PCIEPORTBUS=y
 CONFIG_PCIEAER=y
+# CONFIG_PCIE_ECRC is not set
+# CONFIG_PCIEAER_INJECT is not set
 # CONFIG_PCIEASPM is not set
 CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_MSI is not set
@@ -508,6 +527,7 @@ CONFIG_LLC=m
 # CONFIG_ECONET is not set
 CONFIG_WAN_ROUTER=m
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -564,7 +584,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -675,6 +699,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -709,7 +734,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -736,6 +763,7 @@ CONFIG_BLK_DEV_DM=y
 CONFIG_DM_CRYPT=y
 CONFIG_DM_SNAPSHOT=y
 CONFIG_DM_MIRROR=y
+# CONFIG_DM_LOG_USERSPACE is not set
 CONFIG_DM_ZERO=y
 # CONFIG_DM_MULTIPATH is not set
 # CONFIG_DM_DELAY is not set
@@ -747,14 +775,17 @@ CONFIG_DM_ZERO=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -801,6 +832,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -820,8 +852,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -1018,13 +1052,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1079,6 +1117,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1127,23 +1166,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1207,6 +1232,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1236,8 +1265,8 @@ CONFIG_REISERFS_FS_POSIX_ACL=y
 # CONFIG_REISERFS_FS_SECURITY is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 CONFIG_OCFS2_FS=m
 CONFIG_OCFS2_FS_O2CB=m
 CONFIG_OCFS2_FS_STATS=y
@@ -1245,6 +1274,8 @@ CONFIG_OCFS2_DEBUG_MASKLOG=y
 # CONFIG_OCFS2_DEBUG_FS is not set
 # CONFIG_OCFS2_FS_POSIX_ACL is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1318,6 +1349,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1409,6 +1441,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1434,10 +1467,14 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_TIMER_STATS is not set
 # CONFIG_DEBUG_OBJECTS is not set
 # CONFIG_DEBUG_SLAB is not set
+CONFIG_DEBUG_PREEMPT=y
 # CONFIG_DEBUG_RT_MUTEXES is not set
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1449,7 +1486,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1463,17 +1499,16 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_PREEMPT_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1482,9 +1517,13 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1505,7 +1544,6 @@ CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
 # CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 # CONFIG_SECURITY_TOMOYO is not set
 CONFIG_CRYPTO=y
 
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index 74f7f7c..aece6bb 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:50 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:47 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 CONFIG_PPC_8xx=y
 # CONFIG_40x is not set
@@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -49,12 +50,14 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_REDBOOT=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -101,7 +104,6 @@ CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -114,8 +116,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -129,13 +138,18 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -220,6 +234,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_MATH_EMULATION is not set
 # CONFIG_8XX_MINIMAL_FPEMU is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -239,9 +254,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -280,6 +295,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -336,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -353,7 +370,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -452,6 +473,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
@@ -469,7 +491,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -508,6 +529,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
 CONFIG_FS_ENET_HAS_FEC=y
@@ -556,11 +578,11 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -622,6 +644,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -644,22 +671,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -685,6 +697,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -696,12 +712,15 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -818,6 +837,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -846,6 +866,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -857,7 +880,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -870,16 +892,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -888,9 +909,13 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index 9ffa8de..8105360 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:51 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:48 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_CHECK_CACHE_COHERENCY=y
@@ -32,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -54,11 +57,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -118,7 +123,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -131,16 +135,23 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
 # CONFIG_SLOB is not set
 CONFIG_PROFILING=y
 CONFIG_TRACEPOINTS=y
-# CONFIG_MARKERS is not set
+CONFIG_MARKERS=y
 CONFIG_OPROFILE=m
 CONFIG_HAVE_OPROFILE=y
 CONFIG_KPROBES=y
@@ -150,6 +161,11 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -162,7 +178,7 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -258,6 +274,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -279,9 +296,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -331,6 +348,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -583,6 +601,7 @@ CONFIG_LLC=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 CONFIG_NET_SCHED=y
 
 #
@@ -663,7 +682,11 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -772,6 +795,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=m
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -816,10 +840,6 @@ CONFIG_BLK_DEV_SR=m
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
@@ -836,6 +856,7 @@ CONFIG_SCSI_ISCSI_ATTRS=m
 CONFIG_SCSI_SRP_ATTRS=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 CONFIG_BLK_DEV_3W_XXXX_RAID=m
 CONFIG_SCSI_3W_9XXX=m
 CONFIG_SCSI_ACARD=m
@@ -854,6 +875,7 @@ CONFIG_AIC79XX_RESET_DELAY_MS=15000
 CONFIG_AIC79XX_DEBUG_MASK=0
 # CONFIG_AIC79XX_REG_PRETTY_PRINT is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 CONFIG_SCSI_ARCMSR=m
@@ -875,7 +897,6 @@ CONFIG_SCSI_GDTH=m
 CONFIG_SCSI_IPS=m
 CONFIG_SCSI_INITIO=m
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 CONFIG_SCSI_SYM53C8XX_2=m
 CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1
@@ -903,14 +924,17 @@ CONFIG_SCSI_LPFC=m
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 CONFIG_BONDING=m
 # CONFIG_MACVLAN is not set
@@ -957,6 +981,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -976,6 +1001,7 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
@@ -1177,13 +1203,17 @@ CONFIG_I2C_MV64XXX=m
 CONFIG_SENSORS_PCF8574=m
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1238,6 +1268,7 @@ CONFIG_SENSORS_SMSC47M1=m
 CONFIG_SENSORS_SMSC47B397=m
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 CONFIG_SENSORS_VIA686A=m
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1266,7 +1297,6 @@ CONFIG_SOFT_WATCHDOG=m
 #
 CONFIG_PCIPCWATCHDOG=m
 CONFIG_WDTPCI=m
-CONFIG_WDT_501_PCI=y
 
 #
 # USB-based Watchdog Cards
@@ -1289,23 +1319,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1354,6 +1370,7 @@ CONFIG_USB_MON=m
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=m
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1362,9 +1379,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=m
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1545,6 +1562,10 @@ CONFIG_DMADEVICES=y
 #
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1563,11 +1584,12 @@ CONFIG_FS_MBCACHE=m
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1652,6 +1674,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1764,6 +1787,7 @@ CONFIG_HAS_DMA=y
 CONFIG_CHECK_SIGNATURE=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1794,6 +1818,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 CONFIG_DEBUG_SPINLOCK=y
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 CONFIG_DEBUG_SPINLOCK_SLEEP=y
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 CONFIG_STACKTRACE=y
@@ -1807,7 +1834,6 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_KPROBES_SANITY_TEST is not set
@@ -1824,30 +1850,34 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_RING_BUFFER=y
+CONFIG_EVENT_TRACING=y
+CONFIG_CONTEXT_SWITCH_TRACER=y
 CONFIG_TRACING=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_RING_BUFFER_BENCHMARK is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 CONFIG_DEBUG_STACKOVERFLOW=y
 CONFIG_DEBUG_STACK_USAGE=y
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1869,7 +1899,6 @@ CONFIG_SECURITY_NETWORK=y
 # CONFIG_SECURITY_NETWORK_XFRM is not set
 # CONFIG_SECURITY_PATH is not set
 # CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
 CONFIG_SECURITY_SELINUX=y
 CONFIG_SECURITY_SELINUX_BOOTPARAM=y
 CONFIG_SECURITY_SELINUX_BOOTPARAM_VALUE=1
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index 04915c3..0aa5b43 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:52 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:49 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -53,11 +56,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -99,7 +104,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -112,8 +116,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -127,6 +138,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -134,7 +149,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -213,6 +228,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -228,9 +244,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -300,6 +316,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
@@ -380,7 +397,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
@@ -485,6 +506,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -520,13 +542,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
 #
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -573,6 +599,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
@@ -594,8 +621,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_JME is not set
@@ -685,6 +714,10 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -728,22 +761,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -771,6 +789,10 @@ CONFIG_DAB=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -787,9 +809,10 @@ CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -935,6 +958,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -960,6 +984,9 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -971,7 +998,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -985,22 +1011,23 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index c2a4395..2c292e2 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:53 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:49 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 CONFIG_PPC_8xx=y
 # CONFIG_40x is not set
@@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -49,11 +50,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -100,7 +103,6 @@ CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -113,8 +115,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -128,13 +137,17 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -220,6 +233,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_MATH_EMULATION is not set
 CONFIG_8XX_MINIMAL_FPEMU=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -239,9 +253,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -280,6 +294,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -336,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -353,7 +369,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -452,6 +472,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
@@ -469,7 +490,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -508,6 +528,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
 CONFIG_FS_ENET_HAS_FEC=y
@@ -579,6 +600,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -602,22 +628,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -642,6 +653,10 @@ CONFIG_DAB=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -653,12 +668,15 @@ CONFIG_DAB=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -775,6 +793,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -803,6 +822,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -814,7 +836,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -827,16 +848,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -844,6 +864,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index a4053ab..45671e7 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:54 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:50 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +55,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -114,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -127,9 +131,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -143,6 +154,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -155,7 +170,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -237,6 +252,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 # CONFIG_BINFMT_MISC is not set
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -257,9 +273,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -480,6 +496,7 @@ CONFIG_IP_NF_ARP_MANGLE=m
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -498,7 +515,11 @@ CONFIG_WIRELESS_OLD_REGULATORY=y
 CONFIG_WIRELESS_EXT=y
 CONFIG_WIRELESS_EXT_SYSFS=y
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -647,7 +668,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=m
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -670,10 +693,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -691,6 +710,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -699,6 +719,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -718,7 +739,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -802,14 +822,17 @@ CONFIG_PATA_SIL680=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -846,6 +869,7 @@ CONFIG_TULIP_MMIO=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -865,8 +889,10 @@ CONFIG_R8169=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -1074,13 +1100,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1135,6 +1165,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1169,23 +1200,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1245,6 +1262,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1254,9 +1272,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 # CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1423,6 +1441,7 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1450,6 +1469,10 @@ CONFIG_RTC_DRV_RS5C372=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1469,14 +1492,16 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
 # CONFIG_XFS_RT is not set
 # CONFIG_XFS_DEBUG is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1548,6 +1573,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 CONFIG_NFS_V3_ACL=y
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=m
 CONFIG_NFSD_V3=y
@@ -1578,7 +1604,7 @@ CONFIG_CIFS=m
 #
 # CONFIG_PARTITION_ADVANCED is not set
 CONFIG_MSDOS_PARTITION=y
-CONFIG_NLS=m
+CONFIG_NLS=y
 CONFIG_NLS_DEFAULT="iso8859-1"
 CONFIG_NLS_CODEPAGE_437=m
 # CONFIG_NLS_CODEPAGE_737 is not set
@@ -1645,6 +1671,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1675,6 +1702,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1686,7 +1716,6 @@ CONFIG_DEBUG_MEMORY_INIT=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1700,16 +1729,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1717,6 +1745,8 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index 31e1df6..e9491c1 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:55 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:51 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -53,6 +56,7 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 CONFIG_HIBERNATE_32=y
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
@@ -60,6 +64,7 @@ CONFIG_ARCH_HIBERNATION_POSSIBLE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -105,7 +110,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -119,8 +123,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -134,6 +145,11 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -141,7 +157,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -225,6 +241,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -240,9 +257,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -313,6 +330,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
@@ -374,7 +392,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
@@ -484,6 +506,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -523,13 +546,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
 #
+
+#
+# See the help texts for more information.
+#
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -577,6 +604,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_SCC=y
@@ -654,6 +682,10 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -697,22 +729,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -740,6 +757,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -757,9 +778,10 @@ CONFIG_JBD=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -916,6 +938,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -941,6 +964,9 @@ CONFIG_DEBUG_KERNEL=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -952,7 +978,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -966,16 +991,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -983,9 +1007,12 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig
index 24fa9079..1ae85a3 100644
--- a/arch/powerpc/configs/mgsuvd_defconfig
+++ b/arch/powerpc/configs/mgsuvd_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:55 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:52 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 CONFIG_PPC_8xx=y
 # CONFIG_40x is not set
@@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -48,11 +49,13 @@ CONFIG_OF=y
 # CONFIG_PPC_UDBG_16550 is not set
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -102,7 +105,6 @@ CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
@@ -115,7 +117,14 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -129,6 +138,11 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -136,7 +150,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -222,6 +236,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -241,9 +256,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -281,6 +296,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -342,6 +358,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -359,7 +376,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -463,6 +484,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -492,7 +514,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -531,6 +552,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_SCC=y
 # CONFIG_FS_ENET_HAS_FEC is not set
@@ -602,6 +624,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -625,22 +652,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -665,6 +677,10 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -687,10 +703,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -823,6 +841,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -844,24 +863,14 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_DYNAMIC_DEBUG is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_IRQSTACKS is not set
 # CONFIG_VIRQ_DEBUG is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index 642ab67..f23428c 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:56 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:53 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +55,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -106,7 +111,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -119,9 +123,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -134,6 +145,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -141,7 +156,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -220,6 +235,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -240,9 +256,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -348,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -365,7 +382,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -385,6 +406,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -416,6 +438,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -438,10 +461,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -458,6 +477,7 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -466,6 +486,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -485,7 +506,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -568,14 +588,17 @@ CONFIG_SATA_MV=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -642,6 +665,7 @@ CONFIG_8139TOO=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -663,7 +687,9 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_TSI108_ETH=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -785,6 +811,11 @@ CONFIG_GEN_RTC=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -824,22 +855,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -896,6 +912,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -915,11 +935,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1038,6 +1059,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1063,22 +1085,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index cb966ca..02716f7 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:57 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:54 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -53,11 +56,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -99,7 +104,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -112,9 +116,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -128,6 +139,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -135,7 +150,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -216,6 +231,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -231,9 +247,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -303,6 +319,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
@@ -383,7 +400,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
@@ -489,6 +510,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -524,13 +546,17 @@ CONFIG_HAVE_IDE=y
 #
 
 #
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -577,6 +603,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
@@ -598,8 +625,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_JME is not set
@@ -671,12 +700,13 @@ CONFIG_INPUT_EVDEV=y
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -741,6 +771,10 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -784,22 +818,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -828,6 +847,10 @@ CONFIG_DAB=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -847,9 +870,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -998,6 +1022,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1028,6 +1053,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1039,7 +1067,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1053,22 +1080,23 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 433c303..4a96cb6 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:21:58 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:55 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_FSL_EMB_PERFMON is not set
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -31,15 +33,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -54,6 +57,7 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 CONFIG_REDBOOT=y
 CONFIG_ARCH_SUSPEND_POSSIBLE=y
@@ -61,6 +65,7 @@ CONFIG_ARCH_SUSPEND_POSSIBLE=y
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -110,7 +115,6 @@ CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -123,8 +127,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 CONFIG_SLAB=y
 # CONFIG_SLUB is not set
@@ -138,6 +149,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -150,7 +165,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -192,6 +207,7 @@ CONFIG_MPC837x_MDS=y
 CONFIG_MPC837x_RDB=y
 CONFIG_SBC834x=y
 CONFIG_ASP834x=y
+# CONFIG_KMETER1 is not set
 CONFIG_PPC_MPC831x=y
 CONFIG_PPC_MPC832x=y
 CONFIG_PPC_MPC834x=y
@@ -241,6 +257,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -261,9 +278,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -374,6 +391,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -391,7 +409,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -507,6 +529,7 @@ CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -542,7 +565,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -565,10 +590,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -586,6 +607,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -594,6 +616,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -613,7 +636,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -697,14 +719,17 @@ CONFIG_ATA_SFF=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -751,6 +776,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -770,11 +796,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -965,13 +993,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -1050,6 +1082,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1104,24 +1137,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1159,7 +1177,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1176,10 +1194,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1205,6 +1224,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1291,6 +1311,10 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1310,10 +1334,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1377,6 +1403,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 # CONFIG_NFSD is not set
 CONFIG_LOCKD=y
@@ -1413,7 +1440,46 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 CONFIG_UCC_FAST=y
 CONFIG_UCC=y
@@ -1438,6 +1504,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1461,22 +1528,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig
index c162724..ada5958 100644
--- a/arch/powerpc/configs/mpc85xx_defconfig
+++ b/arch/powerpc/configs/mpc85xx_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Tue Apr 21 15:40:23 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:55 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -34,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -57,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -116,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -129,9 +131,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -146,6 +155,11 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -158,7 +172,7 @@ CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -191,6 +205,7 @@ CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
 CONFIG_SOCRATES=y
 CONFIG_KSI8560=y
+# CONFIG_XES_MPC85xx is not set
 CONFIG_STX_GP3=y
 CONFIG_TQM8540=y
 CONFIG_TQM8541=y
@@ -241,7 +256,9 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_SWIOTLB=y
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -260,9 +277,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -296,7 +313,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
+CONFIG_HAS_RAPIDIO=y
+# CONFIG_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -406,6 +424,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -424,7 +443,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -450,6 +473,7 @@ CONFIG_EXTRA_FIRMWARE=""
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -485,7 +509,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -509,10 +535,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
@@ -530,6 +552,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -538,6 +561,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -557,7 +581,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -641,14 +664,17 @@ CONFIG_PATA_ALI=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -695,6 +721,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_SCC=y
@@ -718,11 +745,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -897,6 +926,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 CONFIG_I2C_CPM=m
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
@@ -927,13 +957,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -987,76 +1021,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1096,6 +1063,11 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_AC97_CODEC=y
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
@@ -1122,6 +1094,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1152,6 +1125,7 @@ CONFIG_SND_PCI=y
 CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1196,7 +1170,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1213,10 +1187,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1242,6 +1217,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1251,9 +1227,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1352,8 +1328,6 @@ CONFIG_EDAC=y
 # CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_MPC85XX=y
-# CONFIG_EDAC_AMD8131 is not set
-# CONFIG_EDAC_AMD8111 is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1385,6 +1359,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1425,6 +1400,10 @@ CONFIG_DMA_ENGINE=y
 # CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1445,11 +1424,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1524,6 +1504,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
@@ -1628,6 +1609,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1658,6 +1640,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1670,7 +1655,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1684,16 +1668,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1702,9 +1685,13 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/mpc85xx_smp_defconfig b/arch/powerpc/configs/mpc85xx_smp_defconfig
index 1aa1c50..db082ce 100644
--- a/arch/powerpc/configs/mpc85xx_smp_defconfig
+++ b/arch/powerpc/configs/mpc85xx_smp_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc2
-# Tue Apr 21 15:41:18 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:56 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 CONFIG_PPC_85xx=y
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
@@ -35,15 +35,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -58,11 +59,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -117,7 +120,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -130,9 +132,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -148,6 +157,11 @@ CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
+# CONFIG_GCOV_KERNEL is not set
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -161,7 +175,7 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -194,6 +208,7 @@ CONFIG_MPC8536_DS=y
 CONFIG_MPC85xx_DS=y
 CONFIG_SOCRATES=y
 CONFIG_KSI8560=y
+# CONFIG_XES_MPC85xx is not set
 CONFIG_STX_GP3=y
 CONFIG_TQM8540=y
 CONFIG_TQM8541=y
@@ -244,7 +259,9 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
 CONFIG_MATH_EMULATION=y
-# CONFIG_IOMMU_HELPER is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_SWIOTLB=y
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -264,9 +281,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -300,7 +317,8 @@ CONFIG_ARCH_SUPPORTS_MSI=y
 # CONFIG_PCI_IOV is not set
 # CONFIG_PCCARD is not set
 # CONFIG_HOTPLUG_PCI is not set
-# CONFIG_HAS_RAPIDIO is not set
+CONFIG_HAS_RAPIDIO=y
+# CONFIG_RAPIDIO is not set
 
 #
 # Advanced setup
@@ -410,6 +428,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -428,7 +447,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -454,6 +477,7 @@ CONFIG_EXTRA_FIRMWARE=""
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -489,7 +513,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -513,10 +539,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
@@ -534,6 +556,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -542,6 +565,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -561,7 +585,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -645,14 +668,17 @@ CONFIG_PATA_ALI=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -699,6 +725,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_SCC=y
@@ -722,11 +749,13 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
 CONFIG_UCC_GETH=y
 # CONFIG_UGETH_MAGIC_PACKET is not set
 # CONFIG_UGETH_TX_ON_DEMAND is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -901,6 +930,7 @@ CONFIG_I2C_HELPER_AUTO=y
 # I2C system bus drivers (mostly embedded / system-on-chip)
 #
 CONFIG_I2C_CPM=m
+# CONFIG_I2C_DESIGNWARE is not set
 # CONFIG_I2C_GPIO is not set
 CONFIG_I2C_MPC=y
 # CONFIG_I2C_OCORES is not set
@@ -931,13 +961,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -991,76 +1025,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1100,6 +1067,11 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_AC97_CODEC=y
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
@@ -1126,6 +1098,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1156,6 +1129,7 @@ CONFIG_SND_PCI=y
 CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1200,7 +1174,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1217,10 +1191,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1246,6 +1221,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_EHCI_ROOT_HUB_TT=y
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1255,9 +1231,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1356,8 +1332,6 @@ CONFIG_EDAC=y
 # CONFIG_EDAC_DEBUG is not set
 CONFIG_EDAC_MM_EDAC=y
 CONFIG_EDAC_MPC85XX=y
-# CONFIG_EDAC_AMD8131 is not set
-# CONFIG_EDAC_AMD8111 is not set
 CONFIG_RTC_LIB=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_HCTOSYS=y
@@ -1389,6 +1363,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1429,6 +1404,10 @@ CONFIG_DMA_ENGINE=y
 # CONFIG_DMATEST is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1449,11 +1428,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1528,6 +1508,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
@@ -1632,6 +1613,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1662,6 +1644,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1674,7 +1659,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1688,16 +1672,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1706,9 +1689,13 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_PPC_EMULATED_STATS is not set
 # CONFIG_CODE_PATCHING_SELFTEST is not set
 # CONFIG_FTR_FIXUP_SELFTEST is not set
 # CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index 3add6f6..6809b61 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:00 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:57 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 CONFIG_PPC_8xx=y
 # CONFIG_40x is not set
@@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -48,11 +49,13 @@ CONFIG_OF=y
 # CONFIG_PPC_UDBG_16550 is not set
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -98,7 +101,6 @@ CONFIG_EMBEDDED=y
 # CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 # CONFIG_HOTPLUG is not set
 CONFIG_PRINTK=y
 # CONFIG_BUG is not set
@@ -111,8 +113,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -126,6 +135,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -133,7 +146,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -219,6 +232,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_BINFMT_MISC is not set
 CONFIG_MATH_EMULATION=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -238,9 +252,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -278,6 +292,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -339,6 +354,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -356,7 +372,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -374,6 +394,7 @@ CONFIG_PREVENT_FIRMWARE_BUILD=y
 # CONFIG_CONNECTOR is not set
 # CONFIG_MTD is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -407,7 +428,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -446,6 +466,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_FS_ENET=y
 CONFIG_FS_ENET_HAS_SCC=y
 CONFIG_FS_ENET_HAS_FEC=y
@@ -453,6 +474,7 @@ CONFIG_FS_ENET_MDIO_FEC=y
 CONFIG_NETDEV_1000=y
 # CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 CONFIG_NETDEV_10000=y
 
 #
@@ -496,11 +518,11 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -562,6 +584,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -597,22 +624,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -664,6 +676,10 @@ CONFIG_USB_SUPPORT=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -685,10 +701,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -808,6 +826,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -831,22 +850,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_PPC_EARLY_DEBUG is not set
diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig
index 5bb1b8e..0e8684a 100644
--- a/arch/powerpc/configs/mpc86xx_defconfig
+++ b/arch/powerpc/configs/mpc86xx_defconfig
@@ -1,26 +1,28 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:00 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:58 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_PHYS_64BIT is not set
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 CONFIG_SMP=y
 CONFIG_NR_CPUS=2
 CONFIG_PPC32=y
@@ -32,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -55,11 +58,13 @@ CONFIG_PPC_UDBG_16550=y
 CONFIG_GENERIC_TBSYNC=y
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -114,7 +119,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -127,9 +131,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -144,6 +155,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_USE_GENERIC_SMP_HELPERS=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -157,7 +172,7 @@ CONFIG_MODVERSIONS=y
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_STOP_MACHINE=y
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -236,7 +251,9 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=m
-# CONFIG_IOMMU_HELPER is not set
+CONFIG_IOMMU_HELPER=y
+CONFIG_SWIOTLB=y
+CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -258,9 +275,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -403,6 +420,7 @@ CONFIG_SCTP_HMAC_MD5=y
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -421,7 +439,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -447,6 +469,7 @@ CONFIG_EXTRA_FIRMWARE=""
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -482,7 +505,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 # CONFIG_IDE is not set
 
@@ -506,10 +531,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 CONFIG_CHR_DEV_SG=y
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 CONFIG_SCSI_MULTI_LUN=y
 # CONFIG_SCSI_CONSTANTS is not set
 CONFIG_SCSI_LOGGING=y
@@ -527,6 +548,7 @@ CONFIG_SCSI_WAIT_SCAN=m
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -535,6 +557,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -554,7 +577,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -638,14 +660,17 @@ CONFIG_PATA_ALI=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=y
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -692,6 +717,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_NETDEV_1000=y
 # CONFIG_ACENIC is not set
@@ -711,8 +737,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_FSL_PQ_MDIO=y
 CONFIG_GIANFAR=y
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -913,13 +941,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -973,76 +1005,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-CONFIG_DVB_CORE=m
-CONFIG_VIDEO_MEDIA=m
-
-#
-# Multimedia drivers
-#
-# CONFIG_MEDIA_ATTACH is not set
-CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
-CONFIG_MEDIA_TUNER_SIMPLE=m
-CONFIG_MEDIA_TUNER_TDA8290=m
-CONFIG_MEDIA_TUNER_TDA9887=m
-CONFIG_MEDIA_TUNER_TEA5761=m
-CONFIG_MEDIA_TUNER_TEA5767=m
-CONFIG_MEDIA_TUNER_MT20XX=m
-CONFIG_MEDIA_TUNER_XC2028=m
-CONFIG_MEDIA_TUNER_XC5000=m
-CONFIG_MEDIA_TUNER_MC44S803=m
-# CONFIG_DVB_DYNAMIC_MINORS is not set
-CONFIG_DVB_CAPTURE_DRIVERS=y
-
-#
-# Supported SAA7146 based PCI Adapters
-#
-# CONFIG_TTPCI_EEPROM is not set
-# CONFIG_DVB_BUDGET_CORE is not set
-
-#
-# Supported USB Adapters
-#
-# CONFIG_DVB_USB is not set
-# CONFIG_DVB_TTUSB_BUDGET is not set
-# CONFIG_DVB_TTUSB_DEC is not set
-# CONFIG_DVB_SIANO_SMS1XXX is not set
-
-#
-# Supported FlexCopII (B2C2) Adapters
-#
-# CONFIG_DVB_B2C2_FLEXCOP is not set
-
-#
-# Supported BT878 Adapters
-#
-
-#
-# Supported Pluto2 Adapters
-#
-# CONFIG_DVB_PLUTO2 is not set
-
-#
-# Supported SDMC DM1105 Adapters
-#
-# CONFIG_DVB_DM1105 is not set
-
-#
-# Supported DVB Frontends
-#
-# CONFIG_DVB_FE_CUSTOMISE is not set
-CONFIG_DAB=y
-# CONFIG_USB_DABUSB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1082,6 +1047,11 @@ CONFIG_SND_VERBOSE_PROCFS=y
 # CONFIG_SND_VERBOSE_PRINTK is not set
 # CONFIG_SND_DEBUG is not set
 CONFIG_SND_VMASTER=y
+# CONFIG_SND_RAWMIDI_SEQ is not set
+# CONFIG_SND_OPL3_LIB_SEQ is not set
+# CONFIG_SND_OPL4_LIB_SEQ is not set
+# CONFIG_SND_SBAWE_SEQ is not set
+# CONFIG_SND_EMU10K1_SEQ is not set
 CONFIG_SND_AC97_CODEC=y
 CONFIG_SND_DRIVERS=y
 # CONFIG_SND_DUMMY is not set
@@ -1108,6 +1078,7 @@ CONFIG_SND_PCI=y
 # CONFIG_SND_CS4281 is not set
 # CONFIG_SND_CS46XX is not set
 # CONFIG_SND_CS5530 is not set
+# CONFIG_SND_CTXFI is not set
 # CONFIG_SND_DARLA20 is not set
 # CONFIG_SND_GINA20 is not set
 # CONFIG_SND_LAYLA20 is not set
@@ -1138,6 +1109,7 @@ CONFIG_SND_PCI=y
 CONFIG_SND_INTEL8X0=y
 # CONFIG_SND_INTEL8X0M is not set
 # CONFIG_SND_KORG1212 is not set
+# CONFIG_SND_LX6464ES is not set
 # CONFIG_SND_MAESTRO3 is not set
 # CONFIG_SND_MIXART is not set
 # CONFIG_SND_NM256 is not set
@@ -1182,7 +1154,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
-# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_DRAGONRISE is not set
 CONFIG_HID_EZKEY=y
 # CONFIG_HID_KYE is not set
 CONFIG_HID_GYRATION=y
@@ -1199,10 +1171,11 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
-# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_GREENASIA is not set
+# CONFIG_HID_SMARTJOYPLUS is not set
 # CONFIG_HID_TOPSEED is not set
-CONFIG_THRUSTMASTER_FF=m
-CONFIG_ZEROPLUS_FF=m
+# CONFIG_HID_THRUSTMASTER is not set
+# CONFIG_HID_ZEROPLUS is not set
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
 CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1228,6 +1201,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1237,9 +1211,9 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
 CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_OHCI_HCD_PPC_OF=y
 CONFIG_USB_OHCI_HCD_PCI=y
 CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y
 CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y
@@ -1360,6 +1334,7 @@ CONFIG_RTC_INTF_DEV=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1387,6 +1362,10 @@ CONFIG_RTC_DRV_CMOS=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1406,11 +1385,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1485,6 +1465,7 @@ CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y
 # CONFIG_NFS_V3_ACL is not set
 CONFIG_NFS_V4=y
+# CONFIG_NFS_V4_1 is not set
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 # CONFIG_NFSD_V3 is not set
@@ -1586,6 +1567,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1616,6 +1598,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1628,7 +1613,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1642,16 +1626,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -1659,6 +1642,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index 42e64eb..dbe8e869 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,14 +1,14 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:01 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:31:59 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-# CONFIG_6xx is not set
+# CONFIG_PPC_BOOK3S_32 is not set
 # CONFIG_PPC_85xx is not set
 CONFIG_PPC_8xx=y
 # CONFIG_40x is not set
@@ -27,15 +27,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -49,11 +50,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -100,7 +103,6 @@ CONFIG_EMBEDDED=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_ALL is not set
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -113,8 +115,15 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 # CONFIG_VM_EVENT_COUNTERS is not set
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -128,13 +137,17 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
 CONFIG_BASE_SMALL=1
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -227,6 +240,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_MATH_EMULATION is not set
 CONFIG_8XX_MINIMAL_FPEMU=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -246,9 +260,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -287,6 +301,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0x80000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -343,6 +358,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -360,7 +376,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -463,6 +483,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 #
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 # CONFIG_BLK_DEV is not set
 # CONFIG_MISC_DEVICES is not set
@@ -480,7 +501,6 @@ CONFIG_HAVE_IDE=y
 # CONFIG_MD is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -519,6 +539,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
 CONFIG_FS_ENET_HAS_FEC=y
@@ -590,6 +611,11 @@ CONFIG_GEN_RTC=y
 # CONFIG_TCG_TPM is not set
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -613,22 +639,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -653,6 +664,10 @@ CONFIG_DAB=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -664,12 +679,15 @@ CONFIG_DAB=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
+# CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY is not set
+CONFIG_INOTIFY_USER=y
 # CONFIG_QUOTA is not set
 # CONFIG_AUTOFS_FS is not set
 # CONFIG_AUTOFS4_FS is not set
@@ -786,6 +804,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -814,6 +833,9 @@ CONFIG_SCHED_DEBUG=y
 # CONFIG_SLUB_STATS is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -825,7 +847,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -838,16 +859,15 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
@@ -855,6 +875,9 @@ CONFIG_TRACING_SUPPORT=y
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
 # CONFIG_KGDB is not set
+# CONFIG_KMEMCHECK is not set
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index 129d808..ff96bb4 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:02 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:00 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 CONFIG_GENERIC_GPIO=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
@@ -53,11 +56,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 CONFIG_DEFAULT_UIMAGE=y
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -103,7 +108,6 @@ CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 CONFIG_KALLSYMS_ALL=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -116,9 +120,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -132,6 +143,10 @@ CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
 CONFIG_HAVE_CLK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -139,7 +154,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-# CONFIG_LBD is not set
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
 #
@@ -219,6 +234,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -234,9 +250,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -307,6 +323,7 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_NET_IPIP is not set
 # CONFIG_NET_IPGRE is not set
 # CONFIG_IP_MROUTE is not set
+# CONFIG_ARPD is not set
 CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
@@ -387,7 +404,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 
@@ -493,6 +514,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_GPIO=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -518,6 +540,7 @@ CONFIG_MISC_DEVICES=y
 # EEPROM support
 #
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -583,13 +606,17 @@ CONFIG_IDE_PROC_FS=y
 #
 
 #
-# A new alternative FireWire stack is available with EXPERIMENTAL=y
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
+# CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_EQUALIZER is not set
@@ -636,6 +663,7 @@ CONFIG_MII=y
 # CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
 # CONFIG_NET_PCI is not set
 # CONFIG_B44 is not set
+# CONFIG_KS8842 is not set
 # CONFIG_ATL2 is not set
 CONFIG_FS_ENET=y
 # CONFIG_FS_ENET_HAS_SCC is not set
@@ -657,8 +685,10 @@ CONFIG_NETDEV_1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_JME is not set
@@ -730,12 +760,13 @@ CONFIG_INPUT_EVDEV=y
 #
 CONFIG_INPUT_KEYBOARD=y
 CONFIG_KEYBOARD_ATKBD=y
-# CONFIG_KEYBOARD_SUNKBD is not set
 # CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
+# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_MATRIX is not set
 # CONFIG_KEYBOARD_NEWTON is not set
 # CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_GPIO is not set
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_XTKBD is not set
 CONFIG_INPUT_MOUSE=y
 CONFIG_MOUSE_PS2=y
 CONFIG_MOUSE_PS2_ALPS=y
@@ -802,6 +833,10 @@ CONFIG_HW_RANDOM=y
 CONFIG_DEVPORT=y
 # CONFIG_I2C is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 CONFIG_ARCH_REQUIRE_GPIOLIB=y
 CONFIG_GPIOLIB=y
@@ -845,22 +880,7 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_HTC_PASIC3 is not set
 # CONFIG_MFD_TMIO is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-CONFIG_DAB=y
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -903,8 +923,9 @@ CONFIG_USB_GADGET_SELECTED=y
 # CONFIG_USB_GADGET_OMAP is not set
 # CONFIG_USB_GADGET_PXA25X is not set
 # CONFIG_USB_GADGET_PXA27X is not set
-# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_S3C_HSOTG is not set
 # CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
 CONFIG_USB_GADGET_M66592=y
 CONFIG_USB_M66592=y
 # CONFIG_USB_GADGET_AMD5536UDC is not set
@@ -912,9 +933,11 @@ CONFIG_USB_M66592=y
 # CONFIG_USB_GADGET_CI13XXX is not set
 # CONFIG_USB_GADGET_NET2280 is not set
 # CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_LANGWELL is not set
 # CONFIG_USB_GADGET_DUMMY_HCD is not set
 CONFIG_USB_GADGET_DUALSPEED=y
 # CONFIG_USB_ZERO is not set
+# CONFIG_USB_AUDIO is not set
 CONFIG_USB_ETH=y
 CONFIG_USB_ETH_RNDIS=y
 # CONFIG_USB_GADGETFS is not set
@@ -939,6 +962,10 @@ CONFIG_USB_ETH_RNDIS=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -958,9 +985,10 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 CONFIG_FS_POSIX_ACL=y
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_OCFS2_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1110,6 +1138,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1140,6 +1169,9 @@ CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
 # CONFIG_RT_MUTEX_TESTER is not set
 # CONFIG_DEBUG_SPINLOCK is not set
 # CONFIG_DEBUG_MUTEXES is not set
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
 # CONFIG_DEBUG_SPINLOCK_SLEEP is not set
 # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
 # CONFIG_DEBUG_KOBJECT is not set
@@ -1151,7 +1183,6 @@ CONFIG_DEBUG_INFO=y
 # CONFIG_DEBUG_LIST is not set
 # CONFIG_DEBUG_SG is not set
 # CONFIG_DEBUG_NOTIFIERS is not set
-# CONFIG_BOOT_PRINTK_DELAY is not set
 # CONFIG_RCU_TORTURE_TEST is not set
 # CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_BACKTRACE_SELF_TEST is not set
@@ -1165,22 +1196,23 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
+CONFIG_FTRACE=y
 # CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
 # CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
+# CONFIG_ENABLE_DEFAULT_TRACERS is not set
 # CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
+CONFIG_BRANCH_PROFILE_NONE=y
+# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set
+# CONFIG_PROFILE_ALL_BRANCHES is not set
 # CONFIG_STACK_TRACER is not set
 # CONFIG_KMEMTRACE is not set
 # CONFIG_WORKQUEUE_TRACER is not set
 # CONFIG_BLK_DEV_IO_TRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_DEBUG_STACKOVERFLOW is not set
 # CONFIG_DEBUG_STACK_USAGE is not set
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index e9f287f..1293c46 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:03 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:01 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 CONFIG_ALTIVEC=y
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_NOT_COHERENT_CACHE=y
 CONFIG_CHECK_CACHE_COHERENCY=y
@@ -32,15 +34,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -54,11 +57,13 @@ CONFIG_OF=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -114,7 +119,6 @@ CONFIG_ANON_INODES=y
 CONFIG_SYSCTL_SYSCALL=y
 CONFIG_KALLSYMS=y
 # CONFIG_KALLSYMS_EXTRA_PASS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -127,9 +131,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -142,6 +153,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -149,7 +164,7 @@ CONFIG_RT_MUTEXES=y
 CONFIG_BASE_SMALL=0
 # CONFIG_MODULES is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -228,6 +243,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_PPC_NEED_DMA_SYNC_OPS=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
@@ -249,9 +265,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -296,6 +312,7 @@ CONFIG_PAGE_OFFSET=0xc0000000
 CONFIG_KERNEL_START=0xc0000000
 CONFIG_PHYSICAL_START=0x00000000
 CONFIG_TASK_SIZE=0xc0000000
+CONFIG_CONSISTENT_SIZE=0x00200000
 CONFIG_NET=y
 
 #
@@ -357,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -374,7 +392,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -479,6 +501,7 @@ CONFIG_MTD_PHYSMAP_OF=y
 # CONFIG_MTD_UBI is not set
 CONFIG_OF_DEVICE=y
 CONFIG_OF_I2C=y
+CONFIG_OF_MDIO=y
 # CONFIG_PARPORT is not set
 CONFIG_BLK_DEV=y
 # CONFIG_BLK_DEV_FD is not set
@@ -514,7 +537,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -591,10 +616,6 @@ CONFIG_BLK_DEV_SD=y
 # CONFIG_BLK_DEV_SR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -611,6 +632,7 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
 # CONFIG_SCSI_CXGB3_ISCSI is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -619,6 +641,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -638,7 +661,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_IPR is not set
@@ -721,7 +743,11 @@ CONFIG_SATA_MV=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
@@ -730,7 +756,6 @@ CONFIG_MACINTOSH_DRIVERS=y
 # CONFIG_MAC_EMUMOUSEBTN is not set
 # CONFIG_WINDFARM is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 # CONFIG_DUMMY is not set
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -797,6 +822,7 @@ CONFIG_8139TOO=y
 # CONFIG_SMSC9420 is not set
 # CONFIG_SUNDANCE is not set
 # CONFIG_TLAN is not set
+# CONFIG_KS8842 is not set
 # CONFIG_VIA_RHINE is not set
 # CONFIG_SC92031 is not set
 # CONFIG_ATL2 is not set
@@ -818,6 +844,7 @@ CONFIG_E1000=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 CONFIG_MV643XX_ETH=y
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
@@ -1007,13 +1034,17 @@ CONFIG_I2C_MV64XXX=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -1068,6 +1099,7 @@ CONFIG_HWMON=y
 # CONFIG_SENSORS_SMSC47B397 is not set
 # CONFIG_SENSORS_ADS7828 is not set
 # CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_TMP401 is not set
 # CONFIG_SENSORS_VIA686A is not set
 # CONFIG_SENSORS_VT1211 is not set
 # CONFIG_SENSORS_VT8231 is not set
@@ -1102,23 +1134,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -1163,6 +1181,7 @@ CONFIG_HID_BELKIN=y
 CONFIG_HID_CHERRY=y
 CONFIG_HID_CHICONY=y
 CONFIG_HID_CYPRESS=y
+CONFIG_HID_DRAGONRISE=y
 # CONFIG_DRAGONRISE_FF is not set
 CONFIG_HID_EZKEY=y
 CONFIG_HID_KYE=y
@@ -1180,9 +1199,14 @@ CONFIG_HID_PETALYNX=y
 CONFIG_HID_SAMSUNG=y
 CONFIG_HID_SONY=y
 CONFIG_HID_SUNPLUS=y
+CONFIG_HID_GREENASIA=y
 # CONFIG_GREENASIA_FF is not set
+CONFIG_HID_SMARTJOYPLUS=y
+# CONFIG_SMARTJOYPLUS_FF is not set
 CONFIG_HID_TOPSEED=y
+CONFIG_HID_THRUSTMASTER=y
 CONFIG_THRUSTMASTER_FF=y
+CONFIG_HID_ZEROPLUS=y
 CONFIG_ZEROPLUS_FF=y
 CONFIG_USB_SUPPORT=y
 CONFIG_USB_ARCH_HAS_HCD=y
@@ -1207,6 +1231,7 @@ CONFIG_USB_MON=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -1215,6 +1240,8 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1322,6 +1349,7 @@ CONFIG_RTC_DRV_MAX6900=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1349,6 +1377,10 @@ CONFIG_RTC_DRV_MAX6900=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1368,11 +1400,12 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 # CONFIG_XFS_FS is not set
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1469,7 +1502,46 @@ CONFIG_MSDOS_PARTITION=y
 # CONFIG_KARMA_PARTITION is not set
 # CONFIG_EFI_PARTITION is not set
 # CONFIG_SYSV68_PARTITION is not set
-# CONFIG_NLS is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+# CONFIG_NLS_CODEPAGE_437 is not set
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+# CONFIG_NLS_ASCII is not set
+# CONFIG_NLS_ISO8859_1 is not set
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+# CONFIG_NLS_UTF8 is not set
 # CONFIG_DLM is not set
 # CONFIG_BINARY_PRINTF is not set
 
@@ -1494,6 +1566,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1519,22 +1592,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index bd4a8d4..28384dc 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,25 +1,27 @@
 #
 # Automatically generated make config: don't edit
-# Linux kernel version: 2.6.30-rc3
-# Wed May 13 17:22:04 2009
+# Linux kernel version: 2.6.31-rc4
+# Wed Jul 29 23:32:01 2009
 #
 # CONFIG_PPC64 is not set
 
 #
 # Processor support
 #
-CONFIG_6xx=y
+CONFIG_PPC_BOOK3S_32=y
 # CONFIG_PPC_85xx is not set
 # CONFIG_PPC_8xx is not set
 # CONFIG_40x is not set
 # CONFIG_44x is not set
 # CONFIG_E200 is not set
 CONFIG_PPC_BOOK3S=y
+CONFIG_6xx=y
 CONFIG_PPC_FPU=y
 # CONFIG_ALTIVEC is not set
 CONFIG_PPC_STD_MMU=y
 CONFIG_PPC_STD_MMU_32=y
 # CONFIG_PPC_MM_SLICES is not set
+CONFIG_PPC_HAVE_PMU_SUPPORT=y
 # CONFIG_SMP is not set
 CONFIG_PPC32=y
 CONFIG_WORD_SIZE=32
@@ -30,15 +32,16 @@ CONFIG_GENERIC_TIME=y
 CONFIG_GENERIC_TIME_VSYSCALL=y
 CONFIG_GENERIC_CLOCKEVENTS=y
 CONFIG_GENERIC_HARDIRQS=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
 # CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
 CONFIG_IRQ_PER_CPU=y
 CONFIG_STACKTRACE_SUPPORT=y
 CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
 CONFIG_LOCKDEP_SUPPORT=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
 CONFIG_ARCH_HAS_ILOG2_U32=y
 CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
 # CONFIG_ARCH_NO_VIRT_TO_BUS is not set
 CONFIG_PPC=y
@@ -52,11 +55,13 @@ CONFIG_PPC_UDBG_16550=y
 # CONFIG_GENERIC_TBSYNC is not set
 CONFIG_AUDIT_ARCH=y
 CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
 # CONFIG_DEFAULT_UIMAGE is not set
 # CONFIG_PPC_DCR_NATIVE is not set
 # CONFIG_PPC_DCR_MMIO is not set
 CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+CONFIG_CONSTRUCTORS=y
 
 #
 # General setup
@@ -101,7 +106,6 @@ CONFIG_ANON_INODES=y
 CONFIG_EMBEDDED=y
 CONFIG_SYSCTL_SYSCALL=y
 # CONFIG_KALLSYMS is not set
-# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_HOTPLUG=y
 CONFIG_PRINTK=y
 CONFIG_BUG=y
@@ -114,9 +118,16 @@ CONFIG_TIMERFD=y
 CONFIG_EVENTFD=y
 CONFIG_SHMEM=y
 CONFIG_AIO=y
+CONFIG_HAVE_PERF_COUNTERS=y
+
+#
+# Performance Counters
+#
+# CONFIG_PERF_COUNTERS is not set
 CONFIG_VM_EVENT_COUNTERS=y
 CONFIG_PCI_QUIRKS=y
 CONFIG_SLUB_DEBUG=y
+# CONFIG_STRIP_ASM_SYMS is not set
 CONFIG_COMPAT_BRK=y
 # CONFIG_SLAB is not set
 CONFIG_SLUB=y
@@ -129,6 +140,10 @@ CONFIG_HAVE_IOREMAP_PROT=y
 CONFIG_HAVE_KPROBES=y
 CONFIG_HAVE_KRETPROBES=y
 CONFIG_HAVE_ARCH_TRACEHOOK=y
+
+#
+# GCOV-based kernel profiling
+#
 # CONFIG_SLOW_WORK is not set
 # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
 CONFIG_SLABINFO=y
@@ -141,7 +156,7 @@ CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_BLOCK=y
-CONFIG_LBD=y
+CONFIG_LBDAF=y
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_BLK_DEV_INTEGRITY is not set
 
@@ -222,6 +237,7 @@ CONFIG_BINFMT_ELF=y
 # CONFIG_HAVE_AOUT is not set
 CONFIG_BINFMT_MISC=y
 # CONFIG_IOMMU_HELPER is not set
+# CONFIG_SWIOTLB is not set
 CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
 CONFIG_ARCH_HAS_WALK_MEMORY=y
 CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y
@@ -242,9 +258,9 @@ CONFIG_MIGRATION=y
 CONFIG_ZONE_DMA_FLAG=1
 CONFIG_BOUNCE=y
 CONFIG_VIRT_TO_BUS=y
-CONFIG_UNEVICTABLE_LRU=y
 CONFIG_HAVE_MLOCK=y
 CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_DEFAULT_MMAP_MIN_ADDR=4096
 CONFIG_PPC_4K_PAGES=y
 # CONFIG_PPC_16K_PAGES is not set
 # CONFIG_PPC_64K_PAGES is not set
@@ -347,6 +363,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
 # CONFIG_ECONET is not set
 # CONFIG_WAN_ROUTER is not set
 # CONFIG_PHONET is not set
+# CONFIG_IEEE802154 is not set
 # CONFIG_NET_SCHED is not set
 # CONFIG_DCB is not set
 
@@ -364,7 +381,11 @@ CONFIG_WIRELESS=y
 CONFIG_WIRELESS_OLD_REGULATORY=y
 # CONFIG_WIRELESS_EXT is not set
 # CONFIG_LIB80211 is not set
-# CONFIG_MAC80211 is not set
+
+#
+# CFG80211 needs to be enabled for MAC80211
+#
+CONFIG_MAC80211_DEFAULT_PS_VALUE=0
 # CONFIG_WIMAX is not set
 # CONFIG_RFKILL is not set
 # CONFIG_NET_9P is not set
@@ -501,7 +522,9 @@ CONFIG_MISC_DEVICES=y
 #
 # CONFIG_EEPROM_AT24 is not set
 # CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_MAX6875 is not set
 # CONFIG_EEPROM_93CX6 is not set
+# CONFIG_CB710_CORE is not set
 CONFIG_HAVE_IDE=y
 CONFIG_IDE=y
 
@@ -579,10 +602,6 @@ CONFIG_BLK_DEV_SR=y
 # CONFIG_BLK_DEV_SR_VENDOR is not set
 # CONFIG_CHR_DEV_SG is not set
 # CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
 # CONFIG_SCSI_MULTI_LUN is not set
 # CONFIG_SCSI_CONSTANTS is not set
 # CONFIG_SCSI_LOGGING is not set
@@ -599,6 +618,7 @@ CONFIG_SCSI_SPI_ATTRS=y
 # CONFIG_SCSI_SRP_ATTRS is not set
 CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_ISCSI_TCP is not set
+# CONFIG_SCSI_BNX2_ISCSI is not set
 # CONFIG_BLK_DEV_3W_XXXX_RAID is not set
 # CONFIG_SCSI_3W_9XXX is not set
 # CONFIG_SCSI_ACARD is not set
@@ -607,6 +627,7 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_AIC7XXX_OLD is not set
 # CONFIG_SCSI_AIC79XX is not set
 # CONFIG_SCSI_AIC94XX is not set
+# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_DPT_I2O is not set
 # CONFIG_SCSI_ADVANSYS is not set
 # CONFIG_SCSI_ARCMSR is not set
@@ -626,7 +647,6 @@ CONFIG_SCSI_LOWLEVEL=y
 # CONFIG_SCSI_IPS is not set
 # CONFIG_SCSI_INITIO is not set
 # CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_MVSAS is not set
 # CONFIG_SCSI_STEX is not set
 # CONFIG_SCSI_SYM53C8XX_2 is not set
 # CONFIG_SCSI_QLOGIC_1280 is not set
@@ -660,14 +680,17 @@ CONFIG_MD_RAID6_PQ=y
 #
 
 #
-# Enable only one of the two stacks, unless you know what you are doing
+# You can enable one or both FireWire driver stacks.
+#
+
+#
+# See the help texts for more information.
 #
 # CONFIG_FIREWIRE is not set
 # CONFIG_IEEE1394 is not set
 # CONFIG_I2O is not set
 # CONFIG_MACINTOSH_DRIVERS is not set
 CONFIG_NETDEVICES=y
-CONFIG_COMPAT_NET_DEV_OPS=y
 CONFIG_DUMMY=m
 # CONFIG_BONDING is not set
 # CONFIG_MACVLAN is not set
@@ -695,8 +718,10 @@ CONFIG_R8169=y
 # CONFIG_VIA_VELOCITY is not set
 # CONFIG_TIGON3 is not set
 # CONFIG_BNX2 is not set
+# CONFIG_CNIC is not set
 # CONFIG_FSL_PQ_MDIO is not set
 # CONFIG_GIANFAR is not set
+# CONFIG_MV643XX_ETH is not set
 # CONFIG_QLA3XXX is not set
 # CONFIG_ATL1 is not set
 # CONFIG_ATL1E is not set
@@ -845,13 +870,17 @@ CONFIG_I2C_MPC=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_PCF8575 is not set
 # CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_MAX6875 is not set
 # CONFIG_SENSORS_TSL2550 is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
 # CONFIG_I2C_DEBUG_CHIP is not set
 # CONFIG_SPI is not set
+
+#
+# PPS support
+#
+# CONFIG_PPS is not set
 CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
 # CONFIG_GPIOLIB is not set
 # CONFIG_W1 is not set
@@ -879,23 +908,9 @@ CONFIG_SSB_POSSIBLE=y
 # CONFIG_MFD_WM8400 is not set
 # CONFIG_MFD_WM8350_I2C is not set
 # CONFIG_MFD_PCF50633 is not set
+# CONFIG_AB3100_CORE is not set
 # CONFIG_REGULATOR is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
+# CONFIG_MEDIA_SUPPORT is not set
 
 #
 # Graphics support
@@ -937,6 +952,7 @@ CONFIG_USB_DEVICE_CLASS=y
 # USB Host Controller Drivers
 #
 # CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_XHCI_HCD is not set
 CONFIG_USB_EHCI_HCD=y
 # CONFIG_USB_EHCI_ROOT_HUB_TT is not set
 # CONFIG_USB_EHCI_TT_NEWSCHED is not set
@@ -946,6 +962,8 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
 # CONFIG_USB_ISP116X_HCD is not set
 # CONFIG_USB_ISP1760_HCD is not set
 CONFIG_USB_OHCI_HCD=y
+# CONFIG_USB_OHCI_HCD_PPC_OF_BE is not set
+# CONFIG_USB_OHCI_HCD_PPC_OF_LE is not set
 # CONFIG_USB_OHCI_HCD_PPC_OF is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
 # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
@@ -1064,6 +1082,7 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_RTC_DRV_S35390A is not set
 # CONFIG_RTC_DRV_FM3130 is not set
 # CONFIG_RTC_DRV_RX8581 is not set
+# CONFIG_RTC_DRV_RX8025 is not set
 
 #
 # SPI RTC drivers
@@ -1091,6 +1110,10 @@ CONFIG_RTC_DRV_DS1307=y
 # CONFIG_DMADEVICES is not set
 # CONFIG_AUXDISPLAY is not set
 # CONFIG_UIO is not set
+
+#
+# TI VLYNQ
+#
 # CONFIG_STAGING is not set
 
 #
@@ -1110,7 +1133,6 @@ CONFIG_FS_MBCACHE=y
 # CONFIG_REISERFS_FS is not set
 # CONFIG_JFS_FS is not set
 # CONFIG_FS_POSIX_ACL is not set
-CONFIG_FILE_LOCKING=y
 CONFIG_XFS_FS=m
 # CONFIG_XFS_QUOTA is not set
 # CONFIG_XFS_POSIX_ACL is not set
@@ -1119,6 +1141,8 @@ CONFIG_XFS_FS=m
 # CONFIG_GFS2_FS is not set
 # CONFIG_OCFS2_FS is not set
 # CONFIG_BTRFS_FS is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_FSNOTIFY=y
 CONFIG_DNOTIFY=y
 CONFIG_INOTIFY=y
 CONFIG_INOTIFY_USER=y
@@ -1273,6 +1297,7 @@ CONFIG_HAS_IOPORT=y
 CONFIG_HAS_DMA=y
 CONFIG_HAVE_LMB=y
 CONFIG_NLATTR=y
+CONFIG_GENERIC_ATOMIC64=y
 
 #
 # Kernel hacking
@@ -1298,22 +1323,11 @@ CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
 CONFIG_HAVE_DYNAMIC_FTRACE=y
 CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
 CONFIG_TRACING_SUPPORT=y
-
-#
-# Tracers
-#
-# CONFIG_FUNCTION_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_EVENT_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_STACK_TRACER is not set
-# CONFIG_KMEMTRACE is not set
-# CONFIG_WORKQUEUE_TRACER is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE is not set
 # CONFIG_SAMPLES is not set
 CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_PPC_DISABLE_WERROR is not set
+CONFIG_PPC_WERROR=y
 CONFIG_PRINT_STACK_DEPTH=64
 # CONFIG_IRQSTACKS is not set
 # CONFIG_BOOTX_TEXT is not set
diff --git a/arch/powerpc/include/asm/pgalloc-32.h b/arch/powerpc/include/asm/pgalloc-32.h
index 0815eb4..c9500d6 100644
--- a/arch/powerpc/include/asm/pgalloc-32.h
+++ b/arch/powerpc/include/asm/pgalloc-32.h
@@ -16,7 +16,7 @@ extern void pgd_free(struct mm_struct *mm, pgd_t *pgd);
  */
 /* #define pmd_alloc_one(mm,address)       ({ BUG(); ((pmd_t *)2); }) */
 #define pmd_free(mm, x) 		do { } while (0)
-#define __pmd_free_tlb(tlb,x)		do { } while (0)
+#define __pmd_free_tlb(tlb,x,a)		do { } while (0)
 /* #define pgd_populate(mm, pmd, pte)      BUG() */
 
 #ifndef CONFIG_BOOKE
diff --git a/arch/powerpc/include/asm/pgalloc-64.h b/arch/powerpc/include/asm/pgalloc-64.h
index afda2bd..e6f069c 100644
--- a/arch/powerpc/include/asm/pgalloc-64.h
+++ b/arch/powerpc/include/asm/pgalloc-64.h
@@ -118,11 +118,11 @@ static inline void pgtable_free(pgtable_free_t pgf)
 		kmem_cache_free(pgtable_cache[cachenum], p);
 }
 
-#define __pmd_free_tlb(tlb, pmd) 	\
+#define __pmd_free_tlb(tlb, pmd,addr)		      \
 	pgtable_free_tlb(tlb, pgtable_free_cache(pmd, \
 		PMD_CACHE_NUM, PMD_TABLE_SIZE-1))
 #ifndef CONFIG_PPC_64K_PAGES
-#define __pud_free_tlb(tlb, pud)	\
+#define __pud_free_tlb(tlb, pud, addr)		      \
 	pgtable_free_tlb(tlb, pgtable_free_cache(pud, \
 		PUD_CACHE_NUM, PUD_TABLE_SIZE-1))
 #endif /* CONFIG_PPC_64K_PAGES */
diff --git a/arch/powerpc/include/asm/pgalloc.h b/arch/powerpc/include/asm/pgalloc.h
index 5d84802..1730e5e 100644
--- a/arch/powerpc/include/asm/pgalloc.h
+++ b/arch/powerpc/include/asm/pgalloc.h
@@ -38,14 +38,14 @@ static inline pgtable_free_t pgtable_free_cache(void *p, int cachenum,
 extern void pgtable_free_tlb(struct mmu_gather *tlb, pgtable_free_t pgf);
 
 #ifdef CONFIG_SMP
-#define __pte_free_tlb(tlb,ptepage)	\
+#define __pte_free_tlb(tlb,ptepage,address)		\
 do { \
 	pgtable_page_dtor(ptepage); \
 	pgtable_free_tlb(tlb, pgtable_free_cache(page_address(ptepage), \
-		PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \
+					PTE_NONCACHE_NUM, PTE_TABLE_SIZE-1)); \
 } while (0)
 #else
-#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, (pte))
+#define __pte_free_tlb(tlb, pte, address)	pte_free((tlb)->mm, (pte))
 #endif
 
 
diff --git a/arch/powerpc/mm/hugetlbpage.c b/arch/powerpc/mm/hugetlbpage.c
index 9920d6a..c46ef2f 100644
--- a/arch/powerpc/mm/hugetlbpage.c
+++ b/arch/powerpc/mm/hugetlbpage.c
@@ -305,7 +305,7 @@ static void hugetlb_free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
 
 	pmd = pmd_offset(pud, start);
 	pud_clear(pud);
-	pmd_free_tlb(tlb, pmd);
+	pmd_free_tlb(tlb, pmd, start);
 }
 
 static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
@@ -348,7 +348,7 @@ static void hugetlb_free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
 
 	pud = pud_offset(pgd, start);
 	pgd_clear(pgd);
-	pud_free_tlb(tlb, pud);
+	pud_free_tlb(tlb, pud, start);
 }
 
 /*
diff --git a/arch/powerpc/mm/mmu_context_nohash.c b/arch/powerpc/mm/mmu_context_nohash.c
index 92a1971..b1a727d 100644
--- a/arch/powerpc/mm/mmu_context_nohash.c
+++ b/arch/powerpc/mm/mmu_context_nohash.c
@@ -217,6 +217,7 @@ void switch_mmu_context(struct mm_struct *prev, struct mm_struct *next)
 			id = steal_context_smp(id);
 			if (id == MMU_NO_CONTEXT)
 				goto again;
+			goto stolen;
 		}
 #endif /* CONFIG_SMP */
 		id = steal_context_up(id);
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_mds.c b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
index 60ed9c0..bfb3283 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_mds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_mds.c
@@ -233,6 +233,19 @@ static void __init mpc85xx_mds_setup_arch(void)
 			/* Turn UCC1 & UCC2 on */
 			setbits8(&bcsr_regs[8], BCSR_UCC1_GETH_EN);
 			setbits8(&bcsr_regs[9], BCSR_UCC2_GETH_EN);
+		} else if (machine_is(mpc8569_mds)) {
+#define BCSR7_UCC12_GETHnRST	(0x1 << 2)
+#define BCSR8_UEM_MARVELL_RST	(0x1 << 1)
+			/*
+			 * U-Boot mangles interrupt polarity for Marvell PHYs,
+			 * so reset built-in and UEM Marvell PHYs, this puts
+			 * the PHYs into their normal state.
+			 */
+			clrbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
+			setbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
+
+			setbits8(&bcsr_regs[7], BCSR7_UCC12_GETHnRST);
+			clrbits8(&bcsr_regs[8], BCSR8_UEM_MARVELL_RST);
 		}
 		iounmap(bcsr_regs);
 	}
diff --git a/arch/s390/include/asm/tlb.h b/arch/s390/include/asm/tlb.h
index 3d8a96d..81150b0 100644
--- a/arch/s390/include/asm/tlb.h
+++ b/arch/s390/include/asm/tlb.h
@@ -96,7 +96,8 @@ static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
  * pte_free_tlb frees a pte table and clears the CRSTE for the
  * page table from the tlb.
  */
-static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte)
+static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte,
+				unsigned long address)
 {
 	if (!tlb->fullmm) {
 		tlb->array[tlb->nr_ptes++] = pte;
@@ -113,7 +114,8 @@ static inline void pte_free_tlb(struct mmu_gather *tlb, pgtable_t pte)
  * as the pgd. pmd_free_tlb checks the asce_limit against 2GB
  * to avoid the double free of the pmd in this case.
  */
-static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
+static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
+				unsigned long address)
 {
 #ifdef __s390x__
 	if (tlb->mm->context.asce_limit <= (1UL << 31))
@@ -134,7 +136,8 @@ static inline void pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
  * as the pgd. pud_free_tlb checks the asce_limit against 4TB
  * to avoid the double free of the pud in this case.
  */
-static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
+static inline void pud_free_tlb(struct mmu_gather *tlb, pud_t *pud,
+				unsigned long address)
 {
 #ifdef __s390x__
 	if (tlb->mm->context.asce_limit <= (1UL << 42))
diff --git a/arch/s390/kernel/early.c b/arch/s390/kernel/early.c
index f9b1440..8d15314 100644
--- a/arch/s390/kernel/early.c
+++ b/arch/s390/kernel/early.c
@@ -210,7 +210,7 @@ static noinline __init void detect_machine_type(void)
 		machine_flags |= MACHINE_FLAG_VM;
 }
 
-static void early_pgm_check_handler(void)
+static __init void early_pgm_check_handler(void)
 {
 	unsigned long addr;
 	const struct exception_table_entry *fixup;
@@ -222,7 +222,7 @@ static void early_pgm_check_handler(void)
 	S390_lowcore.program_old_psw.addr = fixup->fixup | PSW_ADDR_AMODE;
 }
 
-void setup_lowcore_early(void)
+static noinline __init void setup_lowcore_early(void)
 {
 	psw_t psw;
 
diff --git a/arch/s390/kernel/smp.c b/arch/s390/kernel/smp.c
index 2270730..be2cae0 100644
--- a/arch/s390/kernel/smp.c
+++ b/arch/s390/kernel/smp.c
@@ -687,13 +687,14 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
 #ifndef CONFIG_64BIT
 	if (MACHINE_HAS_IEEE)
 		lowcore->extended_save_area_addr = (u32) save_area;
-#else
-	if (vdso_alloc_per_cpu(smp_processor_id(), lowcore))
-		BUG();
 #endif
 	set_prefix((u32)(unsigned long) lowcore);
 	local_mcck_enable();
 	local_irq_enable();
+#ifdef CONFIG_64BIT
+	if (vdso_alloc_per_cpu(smp_processor_id(), &S390_lowcore))
+		BUG();
+#endif
 	for_each_possible_cpu(cpu)
 		if (cpu != smp_processor_id())
 			smp_create_idle(cpu);
diff --git a/arch/s390/kernel/vdso64/clock_gettime.S b/arch/s390/kernel/vdso64/clock_gettime.S
index 79dbfee..49106c6 100644
--- a/arch/s390/kernel/vdso64/clock_gettime.S
+++ b/arch/s390/kernel/vdso64/clock_gettime.S
@@ -88,10 +88,17 @@ __kernel_clock_gettime:
 	llilh	%r4,0x0100
 	sar	%a4,%r4
 	lghi	%r4,0
+	epsw	%r5,0
 	sacf	512				/* Magic ectg instruction */
 	.insn	ssf,0xc80100000000,__VDSO_ECTG_BASE(4),__VDSO_ECTG_USER(4),4
-	sacf	0
-	sar	%a4,%r2
+	tml	%r5,0x4000
+	jo	11f
+	tml	%r5,0x8000
+	jno	10f
+	sacf	256
+	j	11f
+10:	sacf	0
+11:	sar	%a4,%r2
 	algr	%r1,%r0				/* r1 = cputime as TOD value */
 	mghi	%r1,1000			/* convert to nanoseconds */
 	srlg	%r1,%r1,12			/* r1 = cputime in nanosec */
diff --git a/arch/s390/power/swsusp.c b/arch/s390/power/swsusp.c
index e6a4fe9..bd1f5c6 100644
--- a/arch/s390/power/swsusp.c
+++ b/arch/s390/power/swsusp.c
@@ -7,24 +7,36 @@
  *
  */
 
+#include <asm/system.h>
 
-/*
- * save CPU registers before creating a hibernation image and before
- * restoring the memory state from it
- */
 void save_processor_state(void)
 {
-	/* implentation contained in the
-	 * swsusp_arch_suspend function
+	/* swsusp_arch_suspend() actually saves all cpu register contents.
+	 * Machine checks must be disabled since swsusp_arch_suspend() stores
+	 * register contents to their lowcore save areas. That's the same
+	 * place where register contents on machine checks would be saved.
+	 * To avoid register corruption disable machine checks.
+	 * We must also disable machine checks in the new psw mask for
+	 * program checks, since swsusp_arch_suspend() may generate program
+	 * checks. Disabling machine checks for all other new psw masks is
+	 * just paranoia.
 	 */
+	local_mcck_disable();
+	/* Disable lowcore protection */
+	__ctl_clear_bit(0,28);
+	S390_lowcore.external_new_psw.mask &= ~PSW_MASK_MCHECK;
+	S390_lowcore.svc_new_psw.mask &= ~PSW_MASK_MCHECK;
+	S390_lowcore.io_new_psw.mask &= ~PSW_MASK_MCHECK;
+	S390_lowcore.program_new_psw.mask &= ~PSW_MASK_MCHECK;
 }
 
-/*
- * restore the contents of CPU registers
- */
 void restore_processor_state(void)
 {
-	/* implentation contained in the
-	 * swsusp_arch_resume function
-	 */
+	S390_lowcore.external_new_psw.mask |= PSW_MASK_MCHECK;
+	S390_lowcore.svc_new_psw.mask |= PSW_MASK_MCHECK;
+	S390_lowcore.io_new_psw.mask |= PSW_MASK_MCHECK;
+	S390_lowcore.program_new_psw.mask |= PSW_MASK_MCHECK;
+	/* Enable lowcore protection */
+	__ctl_set_bit(0,28);
+	local_mcck_enable();
 }
diff --git a/arch/s390/power/swsusp_asm64.S b/arch/s390/power/swsusp_asm64.S
index 76d688d..b26df5c 100644
--- a/arch/s390/power/swsusp_asm64.S
+++ b/arch/s390/power/swsusp_asm64.S
@@ -32,19 +32,14 @@ swsusp_arch_suspend:
 	/* Deactivate DAT */
 	stnsm	__SF_EMPTY(%r15),0xfb
 
-	/* Switch off lowcore protection */
-	stctg	%c0,%c0,__SF_EMPTY(%r15)
-	ni	__SF_EMPTY+4(%r15),0xef
-	lctlg	%c0,%c0,__SF_EMPTY(%r15)
-
 	/* Store prefix register on stack */
 	stpx	__SF_EMPTY(%r15)
 
-	/* Setup base register for lowcore (absolute 0) */
-	llgf	%r1,__SF_EMPTY(%r15)
+	/* Save prefix register contents for lowcore */
+	llgf	%r4,__SF_EMPTY(%r15)
 
 	/* Get pointer to save area */
-	aghi	%r1,0x1000
+	lghi	%r1,0x1000
 
 	/* Store registers */
 	mvc	0x318(4,%r1),__SF_EMPTY(%r15)	/* move prefix to lowcore */
@@ -79,17 +74,15 @@ swsusp_arch_suspend:
 	xc	__SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
 	spx	__SF_EMPTY(%r15)
 
-	/* Setup lowcore */
-	brasl	%r14,setup_lowcore_early
+	lghi	%r2,0
+	lghi	%r3,2*PAGE_SIZE
+	lghi	%r5,2*PAGE_SIZE
+1:	mvcle	%r2,%r4,0
+	jo	1b
 
 	/* Save image */
 	brasl	%r14,swsusp_save
 
-	/* Switch on lowcore protection */
-	stctg	%c0,%c0,__SF_EMPTY(%r15)
-	oi	__SF_EMPTY+4(%r15),0x10
-	lctlg	%c0,%c0,__SF_EMPTY(%r15)
-
 	/* Restore prefix register and return */
 	lghi	%r1,0x1000
 	spx	0x318(%r1)
@@ -117,11 +110,6 @@ swsusp_arch_resume:
 	/* Deactivate DAT */
 	stnsm	__SF_EMPTY(%r15),0xfb
 
-	/* Switch off lowcore protection */
-	stctg	%c0,%c0,__SF_EMPTY(%r15)
-	ni	__SF_EMPTY+4(%r15),0xef
-	lctlg	%c0,%c0,__SF_EMPTY(%r15)
-
 	/* Set prefix page to zero */
 	xc	__SF_EMPTY(4,%r15),__SF_EMPTY(%r15)
 	spx	__SF_EMPTY(%r15)
@@ -175,7 +163,7 @@ swsusp_arch_resume:
 	/* Load old stack */
 	lg	%r15,0x2f8(%r13)
 
-	/* Pointer to save arae */
+	/* Pointer to save area */
 	lghi	%r13,0x1000
 
 #ifdef CONFIG_SMP
@@ -187,11 +175,6 @@ swsusp_arch_resume:
 	/* Restore prefix register */
 	spx	0x318(%r13)
 
-	/* Switch on lowcore protection */
-	stctg	%c0,%c0,__SF_EMPTY(%r15)
-	oi	__SF_EMPTY+4(%r15),0x10
-	lctlg	%c0,%c0,__SF_EMPTY(%r15)
-
 	/* Activate DAT */
 	stosm	__SF_EMPTY(%r15),0x04
 
diff --git a/arch/sh/include/asm/pgalloc.h b/arch/sh/include/asm/pgalloc.h
index 84dd2db..63ca37b 100644
--- a/arch/sh/include/asm/pgalloc.h
+++ b/arch/sh/include/asm/pgalloc.h
@@ -73,20 +73,12 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 	quicklist_free_page(QUICK_PT, NULL, pte);
 }
 
-#define __pte_free_tlb(tlb,pte)				\
+#define __pte_free_tlb(tlb,pte,addr)			\
 do {							\
 	pgtable_page_dtor(pte);				\
 	tlb_remove_page((tlb), (pte));			\
 } while (0)
 
-/*
- * allocating and freeing a pmd is trivial: the 1-entry pmd is
- * inside the pgd, so has no extra memory associated with it.
- */
-
-#define pmd_free(mm, x)			do { } while (0)
-#define __pmd_free_tlb(tlb,x)		do { } while (0)
-
 static inline void check_pgt_cache(void)
 {
 	quicklist_trim(QUICK_PGD, NULL, 25, 16);
diff --git a/arch/sh/include/asm/tlb.h b/arch/sh/include/asm/tlb.h
index 9c16f73..da8fe7a 100644
--- a/arch/sh/include/asm/tlb.h
+++ b/arch/sh/include/asm/tlb.h
@@ -91,9 +91,9 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 }
 
 #define tlb_remove_page(tlb,page)	free_page_and_swap_cache(page)
-#define pte_free_tlb(tlb, ptep)		pte_free((tlb)->mm, ptep)
-#define pmd_free_tlb(tlb, pmdp)		pmd_free((tlb)->mm, pmdp)
-#define pud_free_tlb(tlb, pudp)		pud_free((tlb)->mm, pudp)
+#define pte_free_tlb(tlb, ptep, addr)	pte_free((tlb)->mm, ptep)
+#define pmd_free_tlb(tlb, pmdp, addr)	pmd_free((tlb)->mm, pmdp)
+#define pud_free_tlb(tlb, pudp, addr)	pud_free((tlb)->mm, pudp)
 
 #define tlb_migrate_finish(mm)		do { } while (0)
 
diff --git a/arch/sparc/include/asm/pgalloc_32.h b/arch/sparc/include/asm/pgalloc_32.h
index 681582d..ca2b344 100644
--- a/arch/sparc/include/asm/pgalloc_32.h
+++ b/arch/sparc/include/asm/pgalloc_32.h
@@ -44,8 +44,8 @@ BTFIXUPDEF_CALL(pmd_t *, pmd_alloc_one, struct mm_struct *, unsigned long)
 BTFIXUPDEF_CALL(void, free_pmd_fast, pmd_t *)
 #define free_pmd_fast(pmd)	BTFIXUP_CALL(free_pmd_fast)(pmd)
 
-#define pmd_free(mm, pmd)	free_pmd_fast(pmd)
-#define __pmd_free_tlb(tlb, pmd) pmd_free((tlb)->mm, pmd)
+#define pmd_free(mm, pmd)		free_pmd_fast(pmd)
+#define __pmd_free_tlb(tlb, pmd, addr)	pmd_free((tlb)->mm, pmd)
 
 BTFIXUPDEF_CALL(void, pmd_populate, pmd_t *, struct page *)
 #define pmd_populate(MM, PMD, PTE)        BTFIXUP_CALL(pmd_populate)(PMD, PTE)
@@ -62,7 +62,7 @@ BTFIXUPDEF_CALL(void, free_pte_fast, pte_t *)
 #define pte_free_kernel(mm, pte)	BTFIXUP_CALL(free_pte_fast)(pte)
 
 BTFIXUPDEF_CALL(void, pte_free, pgtable_t )
-#define pte_free(mm, pte)	BTFIXUP_CALL(pte_free)(pte)
-#define __pte_free_tlb(tlb, pte)	pte_free((tlb)->mm, pte)
+#define pte_free(mm, pte)		BTFIXUP_CALL(pte_free)(pte)
+#define __pte_free_tlb(tlb, pte, addr)	pte_free((tlb)->mm, pte)
 
 #endif /* _SPARC_PGALLOC_H */
diff --git a/arch/sparc/include/asm/tlb_64.h b/arch/sparc/include/asm/tlb_64.h
index ee38e73..dca406b 100644
--- a/arch/sparc/include/asm/tlb_64.h
+++ b/arch/sparc/include/asm/tlb_64.h
@@ -100,9 +100,9 @@ static inline void tlb_remove_page(struct mmu_gather *mp, struct page *page)
 }
 
 #define tlb_remove_tlb_entry(mp,ptep,addr) do { } while (0)
-#define pte_free_tlb(mp, ptepage) pte_free((mp)->mm, ptepage)
-#define pmd_free_tlb(mp, pmdp) pmd_free((mp)->mm, pmdp)
-#define pud_free_tlb(tlb,pudp) __pud_free_tlb(tlb,pudp)
+#define pte_free_tlb(mp, ptepage, addr) pte_free((mp)->mm, ptepage)
+#define pmd_free_tlb(mp, pmdp, addr) pmd_free((mp)->mm, pmdp)
+#define pud_free_tlb(tlb,pudp, addr) __pud_free_tlb(tlb,pudp,addr)
 
 #define tlb_migrate_finish(mm)	do { } while (0)
 #define tlb_start_vma(tlb, vma) do { } while (0)
diff --git a/arch/um/include/asm/pgalloc.h b/arch/um/include/asm/pgalloc.h
index 7189843..32c8ce4 100644
--- a/arch/um/include/asm/pgalloc.h
+++ b/arch/um/include/asm/pgalloc.h
@@ -40,7 +40,7 @@ static inline void pte_free(struct mm_struct *mm, pgtable_t pte)
 	__free_page(pte);
 }
 
-#define __pte_free_tlb(tlb,pte)				\
+#define __pte_free_tlb(tlb,pte, address)		\
 do {							\
 	pgtable_page_dtor(pte);				\
 	tlb_remove_page((tlb),(pte));			\
@@ -53,7 +53,7 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
 	free_page((unsigned long)pmd);
 }
 
-#define __pmd_free_tlb(tlb,x)   tlb_remove_page((tlb),virt_to_page(x))
+#define __pmd_free_tlb(tlb,x, address)   tlb_remove_page((tlb),virt_to_page(x))
 #endif
 
 #define check_pgt_cache()	do { } while (0)
diff --git a/arch/um/include/asm/tlb.h b/arch/um/include/asm/tlb.h
index 5240fa1..660caed 100644
--- a/arch/um/include/asm/tlb.h
+++ b/arch/um/include/asm/tlb.h
@@ -116,11 +116,11 @@ static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
 		__tlb_remove_tlb_entry(tlb, ptep, address);	\
 	} while (0)
 
-#define pte_free_tlb(tlb, ptep) __pte_free_tlb(tlb, ptep)
+#define pte_free_tlb(tlb, ptep, addr) __pte_free_tlb(tlb, ptep, addr)
 
-#define pud_free_tlb(tlb, pudp) __pud_free_tlb(tlb, pudp)
+#define pud_free_tlb(tlb, pudp, addr) __pud_free_tlb(tlb, pudp, addr)
 
-#define pmd_free_tlb(tlb, pmdp) __pmd_free_tlb(tlb, pmdp)
+#define pmd_free_tlb(tlb, pmdp, addr) __pmd_free_tlb(tlb, pmdp, addr)
 
 #define tlb_migrate_finish(mm) do {} while (0)
 
diff --git a/arch/x86/include/asm/lguest.h b/arch/x86/include/asm/lguest.h
index 313389c..5136dad 100644
--- a/arch/x86/include/asm/lguest.h
+++ b/arch/x86/include/asm/lguest.h
@@ -17,8 +17,7 @@
 /* Pages for switcher itself, then two pages per cpu */
 #define TOTAL_SWITCHER_PAGES (SHARED_SWITCHER_PAGES + 2 * nr_cpu_ids)
 
-/* We map at -4M (-2M when PAE is activated) for ease of mapping
- * into the guest (one PTE page). */
+/* We map at -4M (-2M for PAE) for ease of mapping (one PTE page). */
 #ifdef CONFIG_X86_PAE
 #define SWITCHER_ADDR 0xFFE00000
 #else
diff --git a/arch/x86/include/asm/lguest_hcall.h b/arch/x86/include/asm/lguest_hcall.h
index 33600a6..ba0eed8 100644
--- a/arch/x86/include/asm/lguest_hcall.h
+++ b/arch/x86/include/asm/lguest_hcall.h
@@ -30,27 +30,27 @@
 #include <asm/hw_irq.h>
 #include <asm/kvm_para.h>
 
-/*G:030 But first, how does our Guest contact the Host to ask for privileged
+/*G:030
+ * But first, how does our Guest contact the Host to ask for privileged
  * operations?  There are two ways: the direct way is to make a "hypercall",
  * to make requests of the Host Itself.
  *
- * We use the KVM hypercall mechanism. Seventeen hypercalls are
- * available: the hypercall number is put in the %eax register, and the
- * arguments (when required) are placed in %ebx, %ecx, %edx and %esi.
- * If a return value makes sense, it's returned in %eax.
+ * We use the KVM hypercall mechanism, though completely different hypercall
+ * numbers. Seventeen hypercalls are available: the hypercall number is put in
+ * the %eax register, and the arguments (when required) are placed in %ebx,
+ * %ecx, %edx and %esi.  If a return value makes sense, it's returned in %eax.
  *
  * Grossly invalid calls result in Sudden Death at the hands of the vengeful
  * Host, rather than returning failure.  This reflects Winston Churchill's
- * definition of a gentleman: "someone who is only rude intentionally". */
-/*:*/
+ * definition of a gentleman: "someone who is only rude intentionally".
+:*/
 
 /* Can't use our min() macro here: needs to be a constant */
 #define LGUEST_IRQS (NR_IRQS < 32 ? NR_IRQS: 32)
 
 #define LHCALL_RING_SIZE 64
 struct hcall_args {
-	/* These map directly onto eax, ebx, ecx, edx and esi
-	 * in struct lguest_regs */
+	/* These map directly onto eax/ebx/ecx/edx/esi in struct lguest_regs */
 	unsigned long arg0, arg1, arg2, arg3, arg4;
 };
 
diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h
index dd14c54..0e8c2a0 100644
--- a/arch/x86/include/asm/pgalloc.h
+++ b/arch/x86/include/asm/pgalloc.h
@@ -46,7 +46,13 @@ static inline void pte_free(struct mm_struct *mm, struct page *pte)
 	__free_page(pte);
 }
 
-extern void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte);
+extern void ___pte_free_tlb(struct mmu_gather *tlb, struct page *pte);
+
+static inline void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte,
+				  unsigned long address)
+{
+	___pte_free_tlb(tlb, pte);
+}
 
 static inline void pmd_populate_kernel(struct mm_struct *mm,
 				       pmd_t *pmd, pte_t *pte)
@@ -78,7 +84,13 @@ static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
 	free_page((unsigned long)pmd);
 }
 
-extern void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);
+extern void ___pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd);
+
+static inline void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd,
+				  unsigned long adddress)
+{
+	___pmd_free_tlb(tlb, pmd);
+}
 
 #ifdef CONFIG_X86_PAE
 extern void pud_populate(struct mm_struct *mm, pud_t *pudp, pmd_t *pmd);
@@ -108,7 +120,14 @@ static inline void pud_free(struct mm_struct *mm, pud_t *pud)
 	free_page((unsigned long)pud);
 }
 
-extern void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud);
+extern void ___pud_free_tlb(struct mmu_gather *tlb, pud_t *pud);
+
+static inline void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud,
+				  unsigned long address)
+{
+	___pud_free_tlb(tlb, pud);
+}
+
 #endif	/* PAGETABLE_LEVELS > 3 */
 #endif	/* PAGETABLE_LEVELS > 2 */
 
diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h
index 20e6a79..d2c6c93 100644
--- a/arch/x86/include/asm/uaccess.h
+++ b/arch/x86/include/asm/uaccess.h
@@ -212,9 +212,9 @@ extern int __get_user_bad(void);
 		     : "A" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx")
 #else
 #define __put_user_asm_u64(x, ptr, retval, errret) \
-	__put_user_asm(x, ptr, retval, "q", "", "Zr", errret)
+	__put_user_asm(x, ptr, retval, "q", "", "er", errret)
 #define __put_user_asm_ex_u64(x, addr)	\
-	__put_user_asm_ex(x, addr, "q", "", "Zr")
+	__put_user_asm_ex(x, addr, "q", "", "er")
 #define __put_user_x8(x, ptr, __ret_pu) __put_user_x(8, x, ptr, __ret_pu)
 #endif
 
diff --git a/arch/x86/include/asm/uaccess_64.h b/arch/x86/include/asm/uaccess_64.h
index 8cc6873..db24b21 100644
--- a/arch/x86/include/asm/uaccess_64.h
+++ b/arch/x86/include/asm/uaccess_64.h
@@ -88,11 +88,11 @@ int __copy_to_user(void __user *dst, const void *src, unsigned size)
 			      ret, "l", "k", "ir", 4);
 		return ret;
 	case 8:__put_user_asm(*(u64 *)src, (u64 __user *)dst,
-			      ret, "q", "", "ir", 8);
+			      ret, "q", "", "er", 8);
 		return ret;
 	case 10:
 		__put_user_asm(*(u64 *)src, (u64 __user *)dst,
-			       ret, "q", "", "ir", 10);
+			       ret, "q", "", "er", 10);
 		if (unlikely(ret))
 			return ret;
 		asm("":::"memory");
@@ -101,12 +101,12 @@ int __copy_to_user(void __user *dst, const void *src, unsigned size)
 		return ret;
 	case 16:
 		__put_user_asm(*(u64 *)src, (u64 __user *)dst,
-			       ret, "q", "", "ir", 16);
+			       ret, "q", "", "er", 16);
 		if (unlikely(ret))
 			return ret;
 		asm("":::"memory");
 		__put_user_asm(1[(u64 *)src], 1 + (u64 __user *)dst,
-			       ret, "q", "", "ir", 8);
+			       ret, "q", "", "er", 8);
 		return ret;
 	default:
 		return copy_user_generic((__force void *)dst, src, size);
@@ -157,7 +157,7 @@ int __copy_in_user(void __user *dst, const void __user *src, unsigned size)
 			       ret, "q", "", "=r", 8);
 		if (likely(!ret))
 			__put_user_asm(tmp, (u64 __user *)dst,
-				       ret, "q", "", "ir", 8);
+				       ret, "q", "", "er", 8);
 		return ret;
 	}
 	default:
diff --git a/arch/x86/kernel/cpu/amd.c b/arch/x86/kernel/cpu/amd.c
index 28e5f59..e2485b0 100644
--- a/arch/x86/kernel/cpu/amd.c
+++ b/arch/x86/kernel/cpu/amd.c
@@ -356,7 +356,7 @@ static void __cpuinit early_init_amd(struct cpuinfo_x86 *c)
 #endif
 #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_PCI)
 	/* check CPU config space for extended APIC ID */
-	if (c->x86 >= 0xf) {
+	if (cpu_has_apic && c->x86 >= 0xf) {
 		unsigned int val;
 		val = read_pci_config(0, 24, 0, 0x68);
 		if ((val & ((1 << 17) | (1 << 18))) == ((1 << 17) | (1 << 18)))
diff --git a/arch/x86/kernel/cpu/mcheck/mce.c b/arch/x86/kernel/cpu/mcheck/mce.c
index 484c1e5..1cfb623 100644
--- a/arch/x86/kernel/cpu/mcheck/mce.c
+++ b/arch/x86/kernel/cpu/mcheck/mce.c
@@ -1692,17 +1692,15 @@ static ssize_t set_trigger(struct sys_device *s, struct sysdev_attribute *attr,
 				const char *buf, size_t siz)
 {
 	char *p;
-	int len;
 
 	strncpy(mce_helper, buf, sizeof(mce_helper));
 	mce_helper[sizeof(mce_helper)-1] = 0;
-	len = strlen(mce_helper);
 	p = strchr(mce_helper, '\n');
 
-	if (*p)
+	if (p)
 		*p = 0;
 
-	return len;
+	return strlen(mce_helper) + !!p;
 }
 
 static ssize_t set_ignore_ce(struct sys_device *s,
diff --git a/arch/x86/kernel/irqinit.c b/arch/x86/kernel/irqinit.c
index 696f0e4..92b7703 100644
--- a/arch/x86/kernel/irqinit.c
+++ b/arch/x86/kernel/irqinit.c
@@ -187,7 +187,7 @@ static void __init apic_intr_init(void)
 #ifdef CONFIG_X86_THERMAL_VECTOR
 	alloc_intr_gate(THERMAL_APIC_VECTOR, thermal_interrupt);
 #endif
-#ifdef CONFIG_X86_THRESHOLD
+#ifdef CONFIG_X86_MCE_THRESHOLD
 	alloc_intr_gate(THRESHOLD_APIC_VECTOR, threshold_interrupt);
 #endif
 #if defined(CONFIG_X86_NEW_MCE) && defined(CONFIG_X86_LOCAL_APIC)
diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c
index 846510b..2a62d84 100644
--- a/arch/x86/kernel/mfgpt_32.c
+++ b/arch/x86/kernel/mfgpt_32.c
@@ -347,7 +347,7 @@ static irqreturn_t mfgpt_tick(int irq, void *dev_id)
 
 static struct irqaction mfgptirq  = {
 	.handler = mfgpt_tick,
-	.flags = IRQF_DISABLED | IRQF_NOBALANCING,
+	.flags = IRQF_DISABLED | IRQF_NOBALANCING | IRQF_TIMER,
 	.name = "mfgpt-timer"
 };
 
diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c
index d2d1ce8..508e982 100644
--- a/arch/x86/kernel/reboot.c
+++ b/arch/x86/kernel/reboot.c
@@ -249,6 +249,14 @@ static struct dmi_system_id __initdata reboot_dmi_table[] = {
 			DMI_MATCH(DMI_PRODUCT_NAME, "VGN-Z540N"),
 		},
 	},
+	{	/* Handle problems with rebooting on CompuLab SBC-FITPC2 */
+		.callback = set_bios_reboot,
+		.ident = "CompuLab SBC-FITPC2",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "CompuLab"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "SBC-FITPC2"),
+		},
+	},
 	{ }
 };
 
diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c
index de2cab1..63f32d2 100644
--- a/arch/x86/kernel/setup.c
+++ b/arch/x86/kernel/setup.c
@@ -672,6 +672,19 @@ static struct dmi_system_id __initdata bad_bios_dmi_table[] = {
 			DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies"),
 		},
 	},
+	{
+	/*
+	 * AMI BIOS with low memory corruption was found on Intel DG45ID board.
+	 * It hase different DMI_BIOS_VENDOR = "Intel Corp.", for now we will
+	 * match only DMI_BOARD_NAME and see if there is more bad products
+	 * with this vendor.
+	 */
+		.callback = dmi_low_memory_corruption,
+		.ident = "AMI BIOS",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_NAME, "DG45ID"),
+		},
+	},
 #endif
 	{}
 };
diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 367e878..59f31d2 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -112,11 +112,6 @@ SECTIONS
 		_sdata = .;
 		DATA_DATA
 		CONSTRUCTORS
-
-#ifdef CONFIG_X86_64
-		/* End of data section */
-		_edata = .;
-#endif
 	} :data
 
 #ifdef CONFIG_X86_32
@@ -156,10 +151,8 @@ SECTIONS
 	.data.read_mostly : AT(ADDR(.data.read_mostly) - LOAD_OFFSET) {
 		*(.data.read_mostly)
 
-#ifdef CONFIG_X86_32
 		/* End of data section */
 		_edata = .;
-#endif
 	}
 
 #ifdef CONFIG_X86_64
diff --git a/arch/x86/lguest/boot.c b/arch/x86/lguest/boot.c
index f2bf1f7..d677fa9 100644
--- a/arch/x86/lguest/boot.c
+++ b/arch/x86/lguest/boot.c
@@ -22,7 +22,8 @@
  *
  * So how does the kernel know it's a Guest?  We'll see that later, but let's
  * just say that we end up here where we replace the native functions various
- * "paravirt" structures with our Guest versions, then boot like normal. :*/
+ * "paravirt" structures with our Guest versions, then boot like normal.
+:*/
 
 /*
  * Copyright (C) 2006, Rusty Russell <rusty@rustcorp.com.au> IBM Corporation.
@@ -74,7 +75,8 @@
  *
  * The Guest in our tale is a simple creature: identical to the Host but
  * behaving in simplified but equivalent ways.  In particular, the Guest is the
- * same kernel as the Host (or at least, built from the same source code). :*/
+ * same kernel as the Host (or at least, built from the same source code).
+:*/
 
 struct lguest_data lguest_data = {
 	.hcall_status = { [0 ... LHCALL_RING_SIZE-1] = 0xFF },
@@ -85,7 +87,8 @@ struct lguest_data lguest_data = {
 	.syscall_vec = SYSCALL_VECTOR,
 };
 
-/*G:037 async_hcall() is pretty simple: I'm quite proud of it really.  We have a
+/*G:037
+ * async_hcall() is pretty simple: I'm quite proud of it really.  We have a
  * ring buffer of stored hypercalls which the Host will run though next time we
  * do a normal hypercall.  Each entry in the ring has 5 slots for the hypercall
  * arguments, and a "hcall_status" word which is 0 if the call is ready to go,
@@ -94,7 +97,8 @@ struct lguest_data lguest_data = {
  * If we come around to a slot which hasn't been finished, then the table is
  * full and we just make the hypercall directly.  This has the nice side
  * effect of causing the Host to run all the stored calls in the ring buffer
- * which empties it for next time! */
+ * which empties it for next time!
+ */
 static void async_hcall(unsigned long call, unsigned long arg1,
 			unsigned long arg2, unsigned long arg3,
 			unsigned long arg4)
@@ -103,9 +107,11 @@ static void async_hcall(unsigned long call, unsigned long arg1,
 	static unsigned int next_call;
 	unsigned long flags;
 
-	/* Disable interrupts if not already disabled: we don't want an
+	/*
+	 * Disable interrupts if not already disabled: we don't want an
 	 * interrupt handler making a hypercall while we're already doing
-	 * one! */
+	 * one!
+	 */
 	local_irq_save(flags);
 	if (lguest_data.hcall_status[next_call] != 0xFF) {
 		/* Table full, so do normal hcall which will flush table. */
@@ -125,8 +131,9 @@ static void async_hcall(unsigned long call, unsigned long arg1,
 	local_irq_restore(flags);
 }
 
-/*G:035 Notice the lazy_hcall() above, rather than hcall().  This is our first
- * real optimization trick!
+/*G:035
+ * Notice the lazy_hcall() above, rather than hcall().  This is our first real
+ * optimization trick!
  *
  * When lazy_mode is set, it means we're allowed to defer all hypercalls and do
  * them as a batch when lazy_mode is eventually turned off.  Because hypercalls
@@ -136,7 +143,8 @@ static void async_hcall(unsigned long call, unsigned long arg1,
  * lguest_leave_lazy_mode().
  *
  * So, when we're in lazy mode, we call async_hcall() to store the call for
- * future processing: */
+ * future processing:
+ */
 static void lazy_hcall1(unsigned long call,
 		       unsigned long arg1)
 {
@@ -146,6 +154,7 @@ static void lazy_hcall1(unsigned long call,
 		async_hcall(call, arg1, 0, 0, 0);
 }
 
+/* You can imagine what lazy_hcall2, 3 and 4 look like. :*/
 static void lazy_hcall2(unsigned long call,
 		       unsigned long arg1,
 		       unsigned long arg2)
@@ -181,8 +190,10 @@ static void lazy_hcall4(unsigned long call,
 }
 #endif
 
-/* When lazy mode is turned off reset the per-cpu lazy mode variable and then
- * issue the do-nothing hypercall to flush any stored calls. */
+/*G:036
+ * When lazy mode is turned off reset the per-cpu lazy mode variable and then
+ * issue the do-nothing hypercall to flush any stored calls.
+:*/
 static void lguest_leave_lazy_mmu_mode(void)
 {
 	kvm_hypercall0(LHCALL_FLUSH_ASYNC);
@@ -208,9 +219,11 @@ static void lguest_end_context_switch(struct task_struct *next)
  * check there before it tries to deliver an interrupt.
  */
 
-/* save_flags() is expected to return the processor state (ie. "flags").  The
+/*
+ * save_flags() is expected to return the processor state (ie. "flags").  The
  * flags word contains all kind of stuff, but in practice Linux only cares
- * about the interrupt flag.  Our "save_flags()" just returns that. */
+ * about the interrupt flag.  Our "save_flags()" just returns that.
+ */
 static unsigned long save_fl(void)
 {
 	return lguest_data.irq_enabled;
@@ -222,13 +235,15 @@ static void irq_disable(void)
 	lguest_data.irq_enabled = 0;
 }
 
-/* Let's pause a moment.  Remember how I said these are called so often?
+/*
+ * Let's pause a moment.  Remember how I said these are called so often?
  * Jeremy Fitzhardinge optimized them so hard early in 2009 that he had to
  * break some rules.  In particular, these functions are assumed to save their
  * own registers if they need to: normal C functions assume they can trash the
  * eax register.  To use normal C functions, we use
  * PV_CALLEE_SAVE_REGS_THUNK(), which pushes %eax onto the stack, calls the
- * C function, then restores it. */
+ * C function, then restores it.
+ */
 PV_CALLEE_SAVE_REGS_THUNK(save_fl);
 PV_CALLEE_SAVE_REGS_THUNK(irq_disable);
 /*:*/
@@ -237,18 +252,18 @@ PV_CALLEE_SAVE_REGS_THUNK(irq_disable);
 extern void lg_irq_enable(void);
 extern void lg_restore_fl(unsigned long flags);
 
-/*M:003 Note that we don't check for outstanding interrupts when we re-enable
- * them (or when we unmask an interrupt).  This seems to work for the moment,
- * since interrupts are rare and we'll just get the interrupt on the next timer
- * tick, but now we can run with CONFIG_NO_HZ, we should revisit this.  One way
- * would be to put the "irq_enabled" field in a page by itself, and have the
- * Host write-protect it when an interrupt comes in when irqs are disabled.
- * There will then be a page fault as soon as interrupts are re-enabled.
+/*M:003
+ * We could be more efficient in our checking of outstanding interrupts, rather
+ * than using a branch.  One way would be to put the "irq_enabled" field in a
+ * page by itself, and have the Host write-protect it when an interrupt comes
+ * in when irqs are disabled.  There will then be a page fault as soon as
+ * interrupts are re-enabled.
  *
  * A better method is to implement soft interrupt disable generally for x86:
  * instead of disabling interrupts, we set a flag.  If an interrupt does come
  * in, we then disable them for real.  This is uncommon, so we could simply use
- * a hypercall for interrupt control and not worry about efficiency. :*/
+ * a hypercall for interrupt control and not worry about efficiency.
+:*/
 
 /*G:034
  * The Interrupt Descriptor Table (IDT).
@@ -261,10 +276,12 @@ extern void lg_restore_fl(unsigned long flags);
 static void lguest_write_idt_entry(gate_desc *dt,
 				   int entrynum, const gate_desc *g)
 {
-	/* The gate_desc structure is 8 bytes long: we hand it to the Host in
+	/*
+	 * The gate_desc structure is 8 bytes long: we hand it to the Host in
 	 * two 32-bit chunks.  The whole 32-bit kernel used to hand descriptors
 	 * around like this; typesafety wasn't a big concern in Linux's early
-	 * years. */
+	 * years.
+	 */
 	u32 *desc = (u32 *)g;
 	/* Keep the local copy up to date. */
 	native_write_idt_entry(dt, entrynum, g);
@@ -272,9 +289,11 @@ static void lguest_write_idt_entry(gate_desc *dt,
 	kvm_hypercall3(LHCALL_LOAD_IDT_ENTRY, entrynum, desc[0], desc[1]);
 }
 
-/* Changing to a different IDT is very rare: we keep the IDT up-to-date every
+/*
+ * Changing to a different IDT is very rare: we keep the IDT up-to-date every
  * time it is written, so we can simply loop through all entries and tell the
- * Host about them. */
+ * Host about them.
+ */
 static void lguest_load_idt(const struct desc_ptr *desc)
 {
 	unsigned int i;
@@ -305,9 +324,11 @@ static void lguest_load_gdt(const struct desc_ptr *desc)
 		kvm_hypercall3(LHCALL_LOAD_GDT_ENTRY, i, gdt[i].a, gdt[i].b);
 }
 
-/* For a single GDT entry which changes, we do the lazy thing: alter our GDT,
+/*
+ * For a single GDT entry which changes, we do the lazy thing: alter our GDT,
  * then tell the Host to reload the entire thing.  This operation is so rare
- * that this naive implementation is reasonable. */
+ * that this naive implementation is reasonable.
+ */
 static void lguest_write_gdt_entry(struct desc_struct *dt, int entrynum,
 				   const void *desc, int type)
 {
@@ -317,29 +338,36 @@ static void lguest_write_gdt_entry(struct desc_struct *dt, int entrynum,
 		       dt[entrynum].a, dt[entrynum].b);
 }
 
-/* OK, I lied.  There are three "thread local storage" GDT entries which change
+/*
+ * OK, I lied.  There are three "thread local storage" GDT entries which change
  * on every context switch (these three entries are how glibc implements
- * __thread variables).  So we have a hypercall specifically for this case. */
+ * __thread variables).  So we have a hypercall specifically for this case.
+ */
 static void lguest_load_tls(struct thread_struct *t, unsigned int cpu)
 {
-	/* There's one problem which normal hardware doesn't have: the Host
+	/*
+	 * There's one problem which normal hardware doesn't have: the Host
 	 * can't handle us removing entries we're currently using.  So we clear
-	 * the GS register here: if it's needed it'll be reloaded anyway. */
+	 * the GS register here: if it's needed it'll be reloaded anyway.
+	 */
 	lazy_load_gs(0);
 	lazy_hcall2(LHCALL_LOAD_TLS, __pa(&t->tls_array), cpu);
 }
 
-/*G:038 That's enough excitement for now, back to ploughing through each of
- * the different pv_ops structures (we're about 1/3 of the way through).
+/*G:038
+ * That's enough excitement for now, back to ploughing through each of the
+ * different pv_ops structures (we're about 1/3 of the way through).
  *
  * This is the Local Descriptor Table, another weird Intel thingy.  Linux only
  * uses this for some strange applications like Wine.  We don't do anything
- * here, so they'll get an informative and friendly Segmentation Fault. */
+ * here, so they'll get an informative and friendly Segmentation Fault.
+ */
 static void lguest_set_ldt(const void *addr, unsigned entries)
 {
 }
 
-/* This loads a GDT entry into the "Task Register": that entry points to a
+/*
+ * This loads a GDT entry into the "Task Register": that entry points to a
  * structure called the Task State Segment.  Some comments scattered though the
  * kernel code indicate that this used for task switching in ages past, along
  * with blood sacrifice and astrology.
@@ -347,19 +375,21 @@ static void lguest_set_ldt(const void *addr, unsigned entries)
  * Now there's nothing interesting in here that we don't get told elsewhere.
  * But the native version uses the "ltr" instruction, which makes the Host
  * complain to the Guest about a Segmentation Fault and it'll oops.  So we
- * override the native version with a do-nothing version. */
+ * override the native version with a do-nothing version.
+ */
 static void lguest_load_tr_desc(void)
 {
 }
 
-/* The "cpuid" instruction is a way of querying both the CPU identity
+/*
+ * The "cpuid" instruction is a way of querying both the CPU identity
  * (manufacturer, model, etc) and its features.  It was introduced before the
  * Pentium in 1993 and keeps getting extended by both Intel, AMD and others.
  * As you might imagine, after a decade and a half this treatment, it is now a
  * giant ball of hair.  Its entry in the current Intel manual runs to 28 pages.
  *
  * This instruction even it has its own Wikipedia entry.  The Wikipedia entry
- * has been translated into 4 languages.  I am not making this up!
+ * has been translated into 5 languages.  I am not making this up!
  *
  * We could get funky here and identify ourselves as "GenuineLguest", but
  * instead we just use the real "cpuid" instruction.  Then I pretty much turned
@@ -371,7 +401,8 @@ static void lguest_load_tr_desc(void)
  * Replacing the cpuid so we can turn features off is great for the kernel, but
  * anyone (including userspace) can just use the raw "cpuid" instruction and
  * the Host won't even notice since it isn't privileged.  So we try not to get
- * too worked up about it. */
+ * too worked up about it.
+ */
 static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
 			 unsigned int *cx, unsigned int *dx)
 {
@@ -379,43 +410,63 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
 
 	native_cpuid(ax, bx, cx, dx);
 	switch (function) {
-	case 0: /* ID and highest CPUID.  Futureproof a little by sticking to
-		 * older ones. */
+	/*
+	 * CPUID 0 gives the highest legal CPUID number (and the ID string).
+	 * We futureproof our code a little by sticking to known CPUID values.
+	 */
+	case 0:
 		if (*ax > 5)
 			*ax = 5;
 		break;
-	case 1:	/* Basic feature request. */
-		/* We only allow kernel to see SSE3, CMPXCHG16B and SSSE3 */
+
+	/*
+	 * CPUID 1 is a basic feature request.
+	 *
+	 * CX: we only allow kernel to see SSE3, CMPXCHG16B and SSSE3
+	 * DX: SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU and PAE.
+	 */
+	case 1:
 		*cx &= 0x00002201;
-		/* SSE, SSE2, FXSR, MMX, CMOV, CMPXCHG8B, TSC, FPU, PAE. */
 		*dx &= 0x07808151;
-		/* The Host can do a nice optimization if it knows that the
+		/*
+		 * The Host can do a nice optimization if it knows that the
 		 * kernel mappings (addresses above 0xC0000000 or whatever
 		 * PAGE_OFFSET is set to) haven't changed.  But Linux calls
 		 * flush_tlb_user() for both user and kernel mappings unless
-		 * the Page Global Enable (PGE) feature bit is set. */
+		 * the Page Global Enable (PGE) feature bit is set.
+		 */
 		*dx |= 0x00002000;
-		/* We also lie, and say we're family id 5.  6 or greater
+		/*
+		 * We also lie, and say we're family id 5.  6 or greater
 		 * leads to a rdmsr in early_init_intel which we can't handle.
-		 * Family ID is returned as bits 8-12 in ax. */
+		 * Family ID is returned as bits 8-12 in ax.
+		 */
 		*ax &= 0xFFFFF0FF;
 		*ax |= 0x00000500;
 		break;
+	/*
+	 * 0x80000000 returns the highest Extended Function, so we futureproof
+	 * like we do above by limiting it to known fields.
+	 */
 	case 0x80000000:
-		/* Futureproof this a little: if they ask how much extended
-		 * processor information there is, limit it to known fields. */
 		if (*ax > 0x80000008)
 			*ax = 0x80000008;
 		break;
+
+	/*
+	 * PAE systems can mark pages as non-executable.  Linux calls this the
+	 * NX bit.  Intel calls it XD (eXecute Disable), AMD EVP (Enhanced
+	 * Virus Protection).  We just switch turn if off here, since we don't
+	 * support it.
+	 */
 	case 0x80000001:
-		/* Here we should fix nx cap depending on host. */
-		/* For this version of PAE, we just clear NX bit. */
 		*dx &= ~(1 << 20);
 		break;
 	}
 }
 
-/* Intel has four control registers, imaginatively named cr0, cr2, cr3 and cr4.
+/*
+ * Intel has four control registers, imaginatively named cr0, cr2, cr3 and cr4.
  * I assume there's a cr1, but it hasn't bothered us yet, so we'll not bother
  * it.  The Host needs to know when the Guest wants to change them, so we have
  * a whole series of functions like read_cr0() and write_cr0().
@@ -430,7 +481,8 @@ static void lguest_cpuid(unsigned int *ax, unsigned int *bx,
  * name like "FPUTRAP bit" be a little less cryptic?
  *
  * We store cr0 locally because the Host never changes it.  The Guest sometimes
- * wants to read it and we'd prefer not to bother the Host unnecessarily. */
+ * wants to read it and we'd prefer not to bother the Host unnecessarily.
+ */
 static unsigned long current_cr0;
 static void lguest_write_cr0(unsigned long val)
 {
@@ -443,18 +495,22 @@ static unsigned long lguest_read_cr0(void)
 	return current_cr0;
 }
 
-/* Intel provided a special instruction to clear the TS bit for people too cool
+/*
+ * Intel provided a special instruction to clear the TS bit for people too cool
  * to use write_cr0() to do it.  This "clts" instruction is faster, because all
- * the vowels have been optimized out. */
+ * the vowels have been optimized out.
+ */
 static void lguest_clts(void)
 {
 	lazy_hcall1(LHCALL_TS, 0);
 	current_cr0 &= ~X86_CR0_TS;
 }
 
-/* cr2 is the virtual address of the last page fault, which the Guest only ever
+/*
+ * cr2 is the virtual address of the last page fault, which the Guest only ever
  * reads.  The Host kindly writes this into our "struct lguest_data", so we
- * just read it out of there. */
+ * just read it out of there.
+ */
 static unsigned long lguest_read_cr2(void)
 {
 	return lguest_data.cr2;
@@ -463,10 +519,12 @@ static unsigned long lguest_read_cr2(void)
 /* See lguest_set_pte() below. */
 static bool cr3_changed = false;
 
-/* cr3 is the current toplevel pagetable page: the principle is the same as
+/*
+ * cr3 is the current toplevel pagetable page: the principle is the same as
  * cr0.  Keep a local copy, and tell the Host when it changes.  The only
  * difference is that our local copy is in lguest_data because the Host needs
- * to set it upon our initial hypercall. */
+ * to set it upon our initial hypercall.
+ */
 static void lguest_write_cr3(unsigned long cr3)
 {
 	lguest_data.pgdir = cr3;
@@ -511,7 +569,7 @@ static void lguest_write_cr4(unsigned long val)
  * cr3 ---> +---------+
  *	    |  	   --------->+---------+
  *	    |	      |	     | PADDR1  |
- *	  Top-level   |	     | PADDR2  |
+ *	  Mid-level   |	     | PADDR2  |
  *	  (PMD) page  |	     | 	       |
  *	    |	      |	   Lower-level |
  *	    |	      |	   (PTE) page  |
@@ -531,21 +589,62 @@ static void lguest_write_cr4(unsigned long val)
  *    Index into top     Index into second      Offset within page
  *  page directory page    pagetable page
  *
- * The kernel spends a lot of time changing both the top-level page directory
- * and lower-level pagetable pages.  The Guest doesn't know physical addresses,
- * so while it maintains these page tables exactly like normal, it also needs
- * to keep the Host informed whenever it makes a change: the Host will create
- * the real page tables based on the Guests'.
+ * Now, unfortunately, this isn't the whole story: Intel added Physical Address
+ * Extension (PAE) to allow 32 bit systems to use 64GB of memory (ie. 36 bits).
+ * These are held in 64-bit page table entries, so we can now only fit 512
+ * entries in a page, and the neat three-level tree breaks down.
+ *
+ * The result is a four level page table:
+ *
+ * cr3 --> [ 4 Upper  ]
+ *	   [   Level  ]
+ *	   [  Entries ]
+ *	   [(PUD Page)]---> +---------+
+ *	 		    |  	   --------->+---------+
+ *	 		    |	      |	     | PADDR1  |
+ *	 		  Mid-level   |	     | PADDR2  |
+ *	 		  (PMD) page  |	     | 	       |
+ *	 		    |	      |	   Lower-level |
+ *	 		    |	      |	   (PTE) page  |
+ *	 		    |	      |	     |	       |
+ *	 		      ....    	     	 ....
+ *
+ *
+ * And the virtual address is decoded as:
+ *
+ *         1 1 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0
+ *      |<-2->|<--- 9 bits ---->|<---- 9 bits --->|<------ 12 bits ------>|
+ * Index into    Index into mid    Index into lower    Offset within page
+ * top entries   directory page     pagetable page
+ *
+ * It's too hard to switch between these two formats at runtime, so Linux only
+ * supports one or the other depending on whether CONFIG_X86_PAE is set.  Many
+ * distributions turn it on, and not just for people with silly amounts of
+ * memory: the larger PTE entries allow room for the NX bit, which lets the
+ * kernel disable execution of pages and increase security.
+ *
+ * This was a problem for lguest, which couldn't run on these distributions;
+ * then Matias Zabaljauregui figured it all out and implemented it, and only a
+ * handful of puppies were crushed in the process!
+ *
+ * Back to our point: the kernel spends a lot of time changing both the
+ * top-level page directory and lower-level pagetable pages.  The Guest doesn't
+ * know physical addresses, so while it maintains these page tables exactly
+ * like normal, it also needs to keep the Host informed whenever it makes a
+ * change: the Host will create the real page tables based on the Guests'.
  */
 
-/* The Guest calls this to set a second-level entry (pte), ie. to map a page
- * into a process' address space.  We set the entry then tell the Host the
- * toplevel and address this corresponds to.  The Guest uses one pagetable per
- * process, so we need to tell the Host which one we're changing (mm->pgd). */
+/*
+ * The Guest calls this after it has set a second-level entry (pte), ie. to map
+ * a page into a process' address space.  Wetell the Host the toplevel and
+ * address this corresponds to.  The Guest uses one pagetable per process, so
+ * we need to tell the Host which one we're changing (mm->pgd).
+ */
 static void lguest_pte_update(struct mm_struct *mm, unsigned long addr,
 			       pte_t *ptep)
 {
 #ifdef CONFIG_X86_PAE
+	/* PAE needs to hand a 64 bit page table entry, so it uses two args. */
 	lazy_hcall4(LHCALL_SET_PTE, __pa(mm->pgd), addr,
 		    ptep->pte_low, ptep->pte_high);
 #else
@@ -553,6 +652,7 @@ static void lguest_pte_update(struct mm_struct *mm, unsigned long addr,
 #endif
 }
 
+/* This is the "set and update" combo-meal-deal version. */
 static void lguest_set_pte_at(struct mm_struct *mm, unsigned long addr,
 			      pte_t *ptep, pte_t pteval)
 {
@@ -560,10 +660,13 @@ static void lguest_set_pte_at(struct mm_struct *mm, unsigned long addr,
 	lguest_pte_update(mm, addr, ptep);
 }
 
-/* The Guest calls lguest_set_pud to set a top-level entry and lguest_set_pmd
+/*
+ * The Guest calls lguest_set_pud to set a top-level entry and lguest_set_pmd
  * to set a middle-level entry when PAE is activated.
+ *
  * Again, we set the entry then tell the Host which page we changed,
- * and the index of the entry we changed. */
+ * and the index of the entry we changed.
+ */
 #ifdef CONFIG_X86_PAE
 static void lguest_set_pud(pud_t *pudp, pud_t pudval)
 {
@@ -582,8 +685,7 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
 }
 #else
 
-/* The Guest calls lguest_set_pmd to set a top-level entry when PAE is not
- * activated. */
+/* The Guest calls lguest_set_pmd to set a top-level entry when !PAE. */
 static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
 {
 	native_set_pmd(pmdp, pmdval);
@@ -592,7 +694,8 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
 }
 #endif
 
-/* There are a couple of legacy places where the kernel sets a PTE, but we
+/*
+ * There are a couple of legacy places where the kernel sets a PTE, but we
  * don't know the top level any more.  This is useless for us, since we don't
  * know which pagetable is changing or what address, so we just tell the Host
  * to forget all of them.  Fortunately, this is very rare.
@@ -600,7 +703,8 @@ static void lguest_set_pmd(pmd_t *pmdp, pmd_t pmdval)
  * ... except in early boot when the kernel sets up the initial pagetables,
  * which makes booting astonishingly slow: 1.83 seconds!  So we don't even tell
  * the Host anything changed until we've done the first page table switch,
- * which brings boot back to 0.25 seconds. */
+ * which brings boot back to 0.25 seconds.
+ */
 static void lguest_set_pte(pte_t *ptep, pte_t pteval)
 {
 	native_set_pte(ptep, pteval);
@@ -609,6 +713,11 @@ static void lguest_set_pte(pte_t *ptep, pte_t pteval)
 }
 
 #ifdef CONFIG_X86_PAE
+/*
+ * With 64-bit PTE values, we need to be careful setting them: if we set 32
+ * bits at a time, the hardware could see a weird half-set entry.  These
+ * versions ensure we update all 64 bits at once.
+ */
 static void lguest_set_pte_atomic(pte_t *ptep, pte_t pte)
 {
 	native_set_pte_atomic(ptep, pte);
@@ -616,19 +725,21 @@ static void lguest_set_pte_atomic(pte_t *ptep, pte_t pte)
 		lazy_hcall1(LHCALL_FLUSH_TLB, 1);
 }
 
-void lguest_pte_clear(struct mm_struct *mm, unsigned long addr, pte_t *ptep)
+static void lguest_pte_clear(struct mm_struct *mm, unsigned long addr,
+			     pte_t *ptep)
 {
 	native_pte_clear(mm, addr, ptep);
 	lguest_pte_update(mm, addr, ptep);
 }
 
-void lguest_pmd_clear(pmd_t *pmdp)
+static void lguest_pmd_clear(pmd_t *pmdp)
 {
 	lguest_set_pmd(pmdp, __pmd(0));
 }
 #endif
 
-/* Unfortunately for Lguest, the pv_mmu_ops for page tables were based on
+/*
+ * Unfortunately for Lguest, the pv_mmu_ops for page tables were based on
  * native page table operations.  On native hardware you can set a new page
  * table entry whenever you want, but if you want to remove one you have to do
  * a TLB flush (a TLB is a little cache of page table entries kept by the CPU).
@@ -637,24 +748,29 @@ void lguest_pmd_clear(pmd_t *pmdp)
  * called when a valid entry is written, not when it's removed (ie. marked not
  * present).  Instead, this is where we come when the Guest wants to remove a
  * page table entry: we tell the Host to set that entry to 0 (ie. the present
- * bit is zero). */
+ * bit is zero).
+ */
 static void lguest_flush_tlb_single(unsigned long addr)
 {
 	/* Simply set it to zero: if it was not, it will fault back in. */
 	lazy_hcall3(LHCALL_SET_PTE, lguest_data.pgdir, addr, 0);
 }
 
-/* This is what happens after the Guest has removed a large number of entries.
+/*
+ * This is what happens after the Guest has removed a large number of entries.
  * This tells the Host that any of the page table entries for userspace might
- * have changed, ie. virtual addresses below PAGE_OFFSET. */
+ * have changed, ie. virtual addresses below PAGE_OFFSET.
+ */
 static void lguest_flush_tlb_user(void)
 {
 	lazy_hcall1(LHCALL_FLUSH_TLB, 0);
 }
 
-/* This is called when the kernel page tables have changed.  That's not very
+/*
+ * This is called when the kernel page tables have changed.  That's not very
  * common (unless the Guest is using highmem, which makes the Guest extremely
- * slow), so it's worth separating this from the user flushing above. */
+ * slow), so it's worth separating this from the user flushing above.
+ */
 static void lguest_flush_tlb_kernel(void)
 {
 	lazy_hcall1(LHCALL_FLUSH_TLB, 1);
@@ -691,26 +807,38 @@ static struct irq_chip lguest_irq_controller = {
 	.unmask		= enable_lguest_irq,
 };
 
-/* This sets up the Interrupt Descriptor Table (IDT) entry for each hardware
+/*
+ * This sets up the Interrupt Descriptor Table (IDT) entry for each hardware
  * interrupt (except 128, which is used for system calls), and then tells the
  * Linux infrastructure that each interrupt is controlled by our level-based
- * lguest interrupt controller. */
+ * lguest interrupt controller.
+ */
 static void __init lguest_init_IRQ(void)
 {
 	unsigned int i;
 
 	for (i = FIRST_EXTERNAL_VECTOR; i < NR_VECTORS; i++) {
-		/* Some systems map "vectors" to interrupts weirdly.  Lguest has
-		 * a straightforward 1 to 1 mapping, so force that here. */
+		/* Some systems map "vectors" to interrupts weirdly.  Not us! */
 		__get_cpu_var(vector_irq)[i] = i - FIRST_EXTERNAL_VECTOR;
 		if (i != SYSCALL_VECTOR)
 			set_intr_gate(i, interrupt[i - FIRST_EXTERNAL_VECTOR]);
 	}
-	/* This call is required to set up for 4k stacks, where we have
-	 * separate stacks for hard and soft interrupts. */
+
+	/*
+	 * This call is required to set up for 4k stacks, where we have
+	 * separate stacks for hard and soft interrupts.
+	 */
 	irq_ctx_init(smp_processor_id());
 }
 
+/*
+ * With CONFIG_SPARSE_IRQ, interrupt descriptors are allocated as-needed, so
+ * rather than set them in lguest_init_IRQ we are called here every time an
+ * lguest device needs an interrupt.
+ *
+ * FIXME: irq_to_desc_alloc_node() can fail due to lack of memory, we should
+ * pass that up!
+ */
 void lguest_setup_irq(unsigned int irq)
 {
 	irq_to_desc_alloc_node(irq, 0);
@@ -729,31 +857,39 @@ static unsigned long lguest_get_wallclock(void)
 	return lguest_data.time.tv_sec;
 }
 
-/* The TSC is an Intel thing called the Time Stamp Counter.  The Host tells us
+/*
+ * The TSC is an Intel thing called the Time Stamp Counter.  The Host tells us
  * what speed it runs at, or 0 if it's unusable as a reliable clock source.
  * This matches what we want here: if we return 0 from this function, the x86
- * TSC clock will give up and not register itself. */
+ * TSC clock will give up and not register itself.
+ */
 static unsigned long lguest_tsc_khz(void)
 {
 	return lguest_data.tsc_khz;
 }
 
-/* If we can't use the TSC, the kernel falls back to our lower-priority
- * "lguest_clock", where we read the time value given to us by the Host. */
+/*
+ * If we can't use the TSC, the kernel falls back to our lower-priority
+ * "lguest_clock", where we read the time value given to us by the Host.
+ */
 static cycle_t lguest_clock_read(struct clocksource *cs)
 {
 	unsigned long sec, nsec;
 
-	/* Since the time is in two parts (seconds and nanoseconds), we risk
+	/*
+	 * Since the time is in two parts (seconds and nanoseconds), we risk
 	 * reading it just as it's changing from 99 & 0.999999999 to 100 and 0,
 	 * and getting 99 and 0.  As Linux tends to come apart under the stress
-	 * of time travel, we must be careful: */
+	 * of time travel, we must be careful:
+	 */
 	do {
 		/* First we read the seconds part. */
 		sec = lguest_data.time.tv_sec;
-		/* This read memory barrier tells the compiler and the CPU that
+		/*
+		 * This read memory barrier tells the compiler and the CPU that
 		 * this can't be reordered: we have to complete the above
-		 * before going on. */
+		 * before going on.
+		 */
 		rmb();
 		/* Now we read the nanoseconds part. */
 		nsec = lguest_data.time.tv_nsec;
@@ -777,9 +913,11 @@ static struct clocksource lguest_clock = {
 	.flags		= CLOCK_SOURCE_IS_CONTINUOUS,
 };
 
-/* We also need a "struct clock_event_device": Linux asks us to set it to go
+/*
+ * We also need a "struct clock_event_device": Linux asks us to set it to go
  * off some time in the future.  Actually, James Morris figured all this out, I
- * just applied the patch. */
+ * just applied the patch.
+ */
 static int lguest_clockevent_set_next_event(unsigned long delta,
                                            struct clock_event_device *evt)
 {
@@ -829,8 +967,10 @@ static struct clock_event_device lguest_clockevent = {
 	.max_delta_ns           = LG_CLOCK_MAX_DELTA,
 };
 
-/* This is the Guest timer interrupt handler (hardware interrupt 0).  We just
- * call the clockevent infrastructure and it does whatever needs doing. */
+/*
+ * This is the Guest timer interrupt handler (hardware interrupt 0).  We just
+ * call the clockevent infrastructure and it does whatever needs doing.
+ */
 static void lguest_time_irq(unsigned int irq, struct irq_desc *desc)
 {
 	unsigned long flags;
@@ -841,10 +981,12 @@ static void lguest_time_irq(unsigned int irq, struct irq_desc *desc)
 	local_irq_restore(flags);
 }
 
-/* At some point in the boot process, we get asked to set up our timing
+/*
+ * At some point in the boot process, we get asked to set up our timing
  * infrastructure.  The kernel doesn't expect timer interrupts before this, but
  * we cleverly initialized the "blocked_interrupts" field of "struct
- * lguest_data" so that timer interrupts were blocked until now. */
+ * lguest_data" so that timer interrupts were blocked until now.
+ */
 static void lguest_time_init(void)
 {
 	/* Set up the timer interrupt (0) to go to our simple timer routine */
@@ -868,14 +1010,16 @@ static void lguest_time_init(void)
  * to work.  They're pretty simple.
  */
 
-/* The Guest needs to tell the Host what stack it expects traps to use.  For
+/*
+ * The Guest needs to tell the Host what stack it expects traps to use.  For
  * native hardware, this is part of the Task State Segment mentioned above in
  * lguest_load_tr_desc(), but to help hypervisors there's this special call.
  *
  * We tell the Host the segment we want to use (__KERNEL_DS is the kernel data
  * segment), the privilege level (we're privilege level 1, the Host is 0 and
  * will not tolerate us trying to use that), the stack pointer, and the number
- * of pages in the stack. */
+ * of pages in the stack.
+ */
 static void lguest_load_sp0(struct tss_struct *tss,
 			    struct thread_struct *thread)
 {
@@ -889,7 +1033,8 @@ static void lguest_set_debugreg(int regno, unsigned long value)
 	/* FIXME: Implement */
 }
 
-/* There are times when the kernel wants to make sure that no memory writes are
+/*
+ * There are times when the kernel wants to make sure that no memory writes are
  * caught in the cache (that they've all reached real hardware devices).  This
  * doesn't matter for the Guest which has virtual hardware.
  *
@@ -903,11 +1048,13 @@ static void lguest_wbinvd(void)
 {
 }
 
-/* If the Guest expects to have an Advanced Programmable Interrupt Controller,
+/*
+ * If the Guest expects to have an Advanced Programmable Interrupt Controller,
  * we play dumb by ignoring writes and returning 0 for reads.  So it's no
  * longer Programmable nor Controlling anything, and I don't think 8 lines of
  * code qualifies for Advanced.  It will also never interrupt anything.  It
- * does, however, allow us to get through the Linux boot code. */
+ * does, however, allow us to get through the Linux boot code.
+ */
 #ifdef CONFIG_X86_LOCAL_APIC
 static void lguest_apic_write(u32 reg, u32 v)
 {
@@ -956,11 +1103,13 @@ static void lguest_safe_halt(void)
 	kvm_hypercall0(LHCALL_HALT);
 }
 
-/* The SHUTDOWN hypercall takes a string to describe what's happening, and
+/*
+ * The SHUTDOWN hypercall takes a string to describe what's happening, and
  * an argument which says whether this to restart (reboot) the Guest or not.
  *
  * Note that the Host always prefers that the Guest speak in physical addresses
- * rather than virtual addresses, so we use __pa() here. */
+ * rather than virtual addresses, so we use __pa() here.
+ */
 static void lguest_power_off(void)
 {
 	kvm_hypercall2(LHCALL_SHUTDOWN, __pa("Power down"),
@@ -991,8 +1140,10 @@ static __init char *lguest_memory_setup(void)
 	 * nice to move it back to lguest_init.  Patch welcome... */
 	atomic_notifier_chain_register(&panic_notifier_list, &paniced);
 
-	/* The Linux bootloader header contains an "e820" memory map: the
-	 * Launcher populated the first entry with our memory limit. */
+	/*
+	 *The Linux bootloader header contains an "e820" memory map: the
+	 * Launcher populated the first entry with our memory limit.
+	 */
 	e820_add_region(boot_params.e820_map[0].addr,
 			  boot_params.e820_map[0].size,
 			  boot_params.e820_map[0].type);
@@ -1001,16 +1152,17 @@ static __init char *lguest_memory_setup(void)
 	return "LGUEST";
 }
 
-/* We will eventually use the virtio console device to produce console output,
+/*
+ * We will eventually use the virtio console device to produce console output,
  * but before that is set up we use LHCALL_NOTIFY on normal memory to produce
- * console output. */
+ * console output.
+ */
 static __init int early_put_chars(u32 vtermno, const char *buf, int count)
 {
 	char scratch[17];
 	unsigned int len = count;
 
-	/* We use a nul-terminated string, so we have to make a copy.  Icky,
-	 * huh? */
+	/* We use a nul-terminated string, so we make a copy.  Icky, huh? */
 	if (len > sizeof(scratch) - 1)
 		len = sizeof(scratch) - 1;
 	scratch[len] = '\0';
@@ -1021,8 +1173,10 @@ static __init int early_put_chars(u32 vtermno, const char *buf, int count)
 	return len;
 }
 
-/* Rebooting also tells the Host we're finished, but the RESTART flag tells the
- * Launcher to reboot us. */
+/*
+ * Rebooting also tells the Host we're finished, but the RESTART flag tells the
+ * Launcher to reboot us.
+ */
 static void lguest_restart(char *reason)
 {
 	kvm_hypercall2(LHCALL_SHUTDOWN, __pa(reason), LGUEST_SHUTDOWN_RESTART);
@@ -1049,7 +1203,8 @@ static void lguest_restart(char *reason)
  * fit comfortably.
  *
  * First we need assembly templates of each of the patchable Guest operations,
- * and these are in i386_head.S. */
+ * and these are in i386_head.S.
+ */
 
 /*G:060 We construct a table from the assembler templates: */
 static const struct lguest_insns
@@ -1060,9 +1215,11 @@ static const struct lguest_insns
 	[PARAVIRT_PATCH(pv_irq_ops.save_fl)] = { lgstart_pushf, lgend_pushf },
 };
 
-/* Now our patch routine is fairly simple (based on the native one in
+/*
+ * Now our patch routine is fairly simple (based on the native one in
  * paravirt.c).  If we have a replacement, we copy it in and return how much of
- * the available space we used. */
+ * the available space we used.
+ */
 static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf,
 			     unsigned long addr, unsigned len)
 {
@@ -1074,8 +1231,7 @@ static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf,
 
 	insn_len = lguest_insns[type].end - lguest_insns[type].start;
 
-	/* Similarly if we can't fit replacement (shouldn't happen, but let's
-	 * be thorough). */
+	/* Similarly if it can't fit (doesn't happen, but let's be thorough). */
 	if (len < insn_len)
 		return paravirt_patch_default(type, clobber, ibuf, addr, len);
 
@@ -1084,22 +1240,28 @@ static unsigned lguest_patch(u8 type, u16 clobber, void *ibuf,
 	return insn_len;
 }
 
-/*G:029 Once we get to lguest_init(), we know we're a Guest.  The various
+/*G:029
+ * Once we get to lguest_init(), we know we're a Guest.  The various
  * pv_ops structures in the kernel provide points for (almost) every routine we
- * have to override to avoid privileged instructions. */
+ * have to override to avoid privileged instructions.
+ */
 __init void lguest_init(void)
 {
-	/* We're under lguest, paravirt is enabled, and we're running at
-	 * privilege level 1, not 0 as normal. */
+	/* We're under lguest. */
 	pv_info.name = "lguest";
+	/* Paravirt is enabled. */
 	pv_info.paravirt_enabled = 1;
+	/* We're running at privilege level 1, not 0 as normal. */
 	pv_info.kernel_rpl = 1;
+	/* Everyone except Xen runs with this set. */
 	pv_info.shared_kernel_pmd = 1;
 
-	/* We set up all the lguest overrides for sensitive operations.  These
-	 * are detailed with the operations themselves. */
+	/*
+	 * We set up all the lguest overrides for sensitive operations.  These
+	 * are detailed with the operations themselves.
+	 */
 
-	/* interrupt-related operations */
+	/* Interrupt-related operations */
 	pv_irq_ops.init_IRQ = lguest_init_IRQ;
 	pv_irq_ops.save_fl = PV_CALLEE_SAVE(save_fl);
 	pv_irq_ops.restore_fl = __PV_IS_CALLEE_SAVE(lg_restore_fl);
@@ -1107,11 +1269,11 @@ __init void lguest_init(void)
 	pv_irq_ops.irq_enable = __PV_IS_CALLEE_SAVE(lg_irq_enable);
 	pv_irq_ops.safe_halt = lguest_safe_halt;
 
-	/* init-time operations */
+	/* Setup operations */
 	pv_init_ops.memory_setup = lguest_memory_setup;
 	pv_init_ops.patch = lguest_patch;
 
-	/* Intercepts of various cpu instructions */
+	/* Intercepts of various CPU instructions */
 	pv_cpu_ops.load_gdt = lguest_load_gdt;
 	pv_cpu_ops.cpuid = lguest_cpuid;
 	pv_cpu_ops.load_idt = lguest_load_idt;
@@ -1132,7 +1294,7 @@ __init void lguest_init(void)
 	pv_cpu_ops.start_context_switch = paravirt_start_context_switch;
 	pv_cpu_ops.end_context_switch = lguest_end_context_switch;
 
-	/* pagetable management */
+	/* Pagetable management */
 	pv_mmu_ops.write_cr3 = lguest_write_cr3;
 	pv_mmu_ops.flush_tlb_user = lguest_flush_tlb_user;
 	pv_mmu_ops.flush_tlb_single = lguest_flush_tlb_single;
@@ -1154,54 +1316,71 @@ __init void lguest_init(void)
 	pv_mmu_ops.pte_update_defer = lguest_pte_update;
 
 #ifdef CONFIG_X86_LOCAL_APIC
-	/* apic read/write intercepts */
+	/* APIC read/write intercepts */
 	set_lguest_basic_apic_ops();
 #endif
 
-	/* time operations */
+	/* Time operations */
 	pv_time_ops.get_wallclock = lguest_get_wallclock;
 	pv_time_ops.time_init = lguest_time_init;
 	pv_time_ops.get_tsc_khz = lguest_tsc_khz;
 
-	/* Now is a good time to look at the implementations of these functions
-	 * before returning to the rest of lguest_init(). */
+	/*
+	 * Now is a good time to look at the implementations of these functions
+	 * before returning to the rest of lguest_init().
+	 */
 
-	/*G:070 Now we've seen all the paravirt_ops, we return to
+	/*G:070
+	 * Now we've seen all the paravirt_ops, we return to
 	 * lguest_init() where the rest of the fairly chaotic boot setup
-	 * occurs. */
+	 * occurs.
+	 */
 
-	/* The stack protector is a weird thing where gcc places a canary
+	/*
+	 * The stack protector is a weird thing where gcc places a canary
 	 * value on the stack and then checks it on return.  This file is
 	 * compiled with -fno-stack-protector it, so we got this far without
 	 * problems.  The value of the canary is kept at offset 20 from the
 	 * %gs register, so we need to set that up before calling C functions
-	 * in other files. */
+	 * in other files.
+	 */
 	setup_stack_canary_segment(0);
-	/* We could just call load_stack_canary_segment(), but we might as
-	 * call switch_to_new_gdt() which loads the whole table and sets up
-	 * the per-cpu segment descriptor register %fs as well. */
+
+	/*
+	 * We could just call load_stack_canary_segment(), but we might as well
+	 * call switch_to_new_gdt() which loads the whole table and sets up the
+	 * per-cpu segment descriptor register %fs as well.
+	 */
 	switch_to_new_gdt(0);
 
-	/* As described in head_32.S, we map the first 128M of memory. */
+	/* We actually boot with all memory mapped, but let's say 128MB. */
 	max_pfn_mapped = (128*1024*1024) >> PAGE_SHIFT;
 
-	/* The Host<->Guest Switcher lives at the top of our address space, and
+	/*
+	 * The Host<->Guest Switcher lives at the top of our address space, and
 	 * the Host told us how big it is when we made LGUEST_INIT hypercall:
-	 * it put the answer in lguest_data.reserve_mem  */
+	 * it put the answer in lguest_data.reserve_mem
+	 */
 	reserve_top_address(lguest_data.reserve_mem);
 
-	/* If we don't initialize the lock dependency checker now, it crashes
-	 * paravirt_disable_iospace. */
+	/*
+	 * If we don't initialize the lock dependency checker now, it crashes
+	 * paravirt_disable_iospace.
+	 */
 	lockdep_init();
 
-	/* The IDE code spends about 3 seconds probing for disks: if we reserve
+	/*
+	 * The IDE code spends about 3 seconds probing for disks: if we reserve
 	 * all the I/O ports up front it can't get them and so doesn't probe.
 	 * Other device drivers are similar (but less severe).  This cuts the
-	 * kernel boot time on my machine from 4.1 seconds to 0.45 seconds. */
+	 * kernel boot time on my machine from 4.1 seconds to 0.45 seconds.
+	 */
 	paravirt_disable_iospace();
 
-	/* This is messy CPU setup stuff which the native boot code does before
-	 * start_kernel, so we have to do, too: */
+	/*
+	 * This is messy CPU setup stuff which the native boot code does before
+	 * start_kernel, so we have to do, too:
+	 */
 	cpu_detect(&new_cpu_data);
 	/* head.S usually sets up the first capability word, so do it here. */
 	new_cpu_data.x86_capability[0] = cpuid_edx(1);
@@ -1218,22 +1397,28 @@ __init void lguest_init(void)
 	acpi_ht = 0;
 #endif
 
-	/* We set the preferred console to "hvc".  This is the "hypervisor
+	/*
+	 * We set the preferred console to "hvc".  This is the "hypervisor
 	 * virtual console" driver written by the PowerPC people, which we also
-	 * adapted for lguest's use. */
+	 * adapted for lguest's use.
+	 */
 	add_preferred_console("hvc", 0, NULL);
 
 	/* Register our very early console. */
 	virtio_cons_early_init(early_put_chars);
 
-	/* Last of all, we set the power management poweroff hook to point to
+	/*
+	 * Last of all, we set the power management poweroff hook to point to
 	 * the Guest routine to power off, and the reboot hook to our restart
-	 * routine. */
+	 * routine.
+	 */
 	pm_power_off = lguest_power_off;
 	machine_ops.restart = lguest_restart;
 
-	/* Now we're set up, call i386_start_kernel() in head32.c and we proceed
-	 * to boot as normal.  It never returns. */
+	/*
+	 * Now we're set up, call i386_start_kernel() in head32.c and we proceed
+	 * to boot as normal.  It never returns.
+	 */
 	i386_start_kernel();
 }
 /*
diff --git a/arch/x86/lguest/i386_head.S b/arch/x86/lguest/i386_head.S
index a9c8cfe..27eac0f 100644
--- a/arch/x86/lguest/i386_head.S
+++ b/arch/x86/lguest/i386_head.S
@@ -5,7 +5,8 @@
 #include <asm/thread_info.h>
 #include <asm/processor-flags.h>
 
-/*G:020 Our story starts with the kernel booting into startup_32 in
+/*G:020
+ * Our story starts with the kernel booting into startup_32 in
  * arch/x86/kernel/head_32.S.  It expects a boot header, which is created by
  * the bootloader (the Launcher in our case).
  *
@@ -21,11 +22,14 @@
  * data without remembering to subtract __PAGE_OFFSET!
  *
  * The .section line puts this code in .init.text so it will be discarded after
- * boot. */
+ * boot.
+ */
 .section .init.text, "ax", @progbits
 ENTRY(lguest_entry)
-	/* We make the "initialization" hypercall now to tell the Host about
-	 * us, and also find out where it put our page tables. */
+	/*
+	 * We make the "initialization" hypercall now to tell the Host about
+	 * us, and also find out where it put our page tables.
+	 */
 	movl $LHCALL_LGUEST_INIT, %eax
 	movl $lguest_data - __PAGE_OFFSET, %ebx
 	.byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */
@@ -33,13 +37,14 @@ ENTRY(lguest_entry)
 	/* Set up the initial stack so we can run C code. */
 	movl $(init_thread_union+THREAD_SIZE),%esp
 
-	/* Jumps are relative, and we're running __PAGE_OFFSET too low at the
-	 * moment. */
+	/* Jumps are relative: we're running __PAGE_OFFSET too low. */
 	jmp lguest_init+__PAGE_OFFSET
 
-/*G:055 We create a macro which puts the assembler code between lgstart_ and
- * lgend_ markers.  These templates are put in the .text section: they can't be
- * discarded after boot as we may need to patch modules, too. */
+/*G:055
+ * We create a macro which puts the assembler code between lgstart_ and lgend_
+ * markers.  These templates are put in the .text section: they can't be
+ * discarded after boot as we may need to patch modules, too.
+ */
 .text
 #define LGUEST_PATCH(name, insns...)			\
 	lgstart_##name:	insns; lgend_##name:;		\
@@ -48,83 +53,103 @@ ENTRY(lguest_entry)
 LGUEST_PATCH(cli, movl $0, lguest_data+LGUEST_DATA_irq_enabled)
 LGUEST_PATCH(pushf, movl lguest_data+LGUEST_DATA_irq_enabled, %eax)
 
-/*G:033 But using those wrappers is inefficient (we'll see why that doesn't
- * matter for save_fl and irq_disable later).  If we write our routines
- * carefully in assembler, we can avoid clobbering any registers and avoid
- * jumping through the wrapper functions.
+/*G:033
+ * But using those wrappers is inefficient (we'll see why that doesn't matter
+ * for save_fl and irq_disable later).  If we write our routines carefully in
+ * assembler, we can avoid clobbering any registers and avoid jumping through
+ * the wrapper functions.
  *
  * I skipped over our first piece of assembler, but this one is worth studying
- * in a bit more detail so I'll describe in easy stages.  First, the routine
- * to enable interrupts: */
+ * in a bit more detail so I'll describe in easy stages.  First, the routine to
+ * enable interrupts:
+ */
 ENTRY(lg_irq_enable)
-	/* The reverse of irq_disable, this sets lguest_data.irq_enabled to
-	 * X86_EFLAGS_IF (ie. "Interrupts enabled"). */
+	/*
+	 * The reverse of irq_disable, this sets lguest_data.irq_enabled to
+	 * X86_EFLAGS_IF (ie. "Interrupts enabled").
+	 */
 	movl $X86_EFLAGS_IF, lguest_data+LGUEST_DATA_irq_enabled
-	/* But now we need to check if the Host wants to know: there might have
+	/*
+	 * But now we need to check if the Host wants to know: there might have
 	 * been interrupts waiting to be delivered, in which case it will have
 	 * set lguest_data.irq_pending to X86_EFLAGS_IF.  If it's not zero, we
-	 * jump to send_interrupts, otherwise we're done. */
+	 * jump to send_interrupts, otherwise we're done.
+	 */
 	testl $0, lguest_data+LGUEST_DATA_irq_pending
 	jnz send_interrupts
-	/* One cool thing about x86 is that you can do many things without using
+	/*
+	 * One cool thing about x86 is that you can do many things without using
 	 * a register.  In this case, the normal path hasn't needed to save or
-	 * restore any registers at all! */
+	 * restore any registers at all!
+	 */
 	ret
 send_interrupts:
-	/* OK, now we need a register: eax is used for the hypercall number,
+	/*
+	 * OK, now we need a register: eax is used for the hypercall number,
 	 * which is LHCALL_SEND_INTERRUPTS.
 	 *
 	 * We used not to bother with this pending detection at all, which was
 	 * much simpler.  Sooner or later the Host would realize it had to
 	 * send us an interrupt.  But that turns out to make performance 7
 	 * times worse on a simple tcp benchmark.  So now we do this the hard
-	 * way. */
+	 * way.
+	 */
 	pushl %eax
 	movl $LHCALL_SEND_INTERRUPTS, %eax
-	/* This is a vmcall instruction (same thing that KVM uses).  Older
+	/*
+	 * This is a vmcall instruction (same thing that KVM uses).  Older
 	 * assembler versions might not know the "vmcall" instruction, so we
-	 * create one manually here. */
+	 * create one manually here.
+	 */
 	.byte 0x0f,0x01,0xc1 /* KVM_HYPERCALL */
+	/* Put eax back the way we found it. */
 	popl %eax
 	ret
 
-/* Finally, the "popf" or "restore flags" routine.  The %eax register holds the
+/*
+ * Finally, the "popf" or "restore flags" routine.  The %eax register holds the
  * flags (in practice, either X86_EFLAGS_IF or 0): if it's X86_EFLAGS_IF we're
- * enabling interrupts again, if it's 0 we're leaving them off. */
+ * enabling interrupts again, if it's 0 we're leaving them off.
+ */
 ENTRY(lg_restore_fl)
 	/* This is just "lguest_data.irq_enabled = flags;" */
 	movl %eax, lguest_data+LGUEST_DATA_irq_enabled
-	/* Now, if the %eax value has enabled interrupts and
+	/*
+	 * Now, if the %eax value has enabled interrupts and
 	 * lguest_data.irq_pending is set, we want to tell the Host so it can
 	 * deliver any outstanding interrupts.  Fortunately, both values will
 	 * be X86_EFLAGS_IF (ie. 512) in that case, and the "testl"
 	 * instruction will AND them together for us.  If both are set, we
-	 * jump to send_interrupts. */
+	 * jump to send_interrupts.
+	 */
 	testl lguest_data+LGUEST_DATA_irq_pending, %eax
 	jnz send_interrupts
 	/* Again, the normal path has used no extra registers.  Clever, huh? */
 	ret
+/*:*/
 
 /* These demark the EIP range where host should never deliver interrupts. */
 .global lguest_noirq_start
 .global lguest_noirq_end
 
-/*M:004 When the Host reflects a trap or injects an interrupt into the Guest,
- * it sets the eflags interrupt bit on the stack based on
- * lguest_data.irq_enabled, so the Guest iret logic does the right thing when
- * restoring it.  However, when the Host sets the Guest up for direct traps,
- * such as system calls, the processor is the one to push eflags onto the
- * stack, and the interrupt bit will be 1 (in reality, interrupts are always
- * enabled in the Guest).
+/*M:004
+ * When the Host reflects a trap or injects an interrupt into the Guest, it
+ * sets the eflags interrupt bit on the stack based on lguest_data.irq_enabled,
+ * so the Guest iret logic does the right thing when restoring it.  However,
+ * when the Host sets the Guest up for direct traps, such as system calls, the
+ * processor is the one to push eflags onto the stack, and the interrupt bit
+ * will be 1 (in reality, interrupts are always enabled in the Guest).
  *
  * This turns out to be harmless: the only trap which should happen under Linux
  * with interrupts disabled is Page Fault (due to our lazy mapping of vmalloc
  * regions), which has to be reflected through the Host anyway.  If another
  * trap *does* go off when interrupts are disabled, the Guest will panic, and
- * we'll never get to this iret! :*/
+ * we'll never get to this iret!
+:*/
 
-/*G:045 There is one final paravirt_op that the Guest implements, and glancing
- * at it you can see why I left it to last.  It's *cool*!  It's in *assembler*!
+/*G:045
+ * There is one final paravirt_op that the Guest implements, and glancing at it
+ * you can see why I left it to last.  It's *cool*!  It's in *assembler*!
  *
  * The "iret" instruction is used to return from an interrupt or trap.  The
  * stack looks like this:
@@ -148,15 +173,18 @@ ENTRY(lg_restore_fl)
  * return to userspace or wherever.  Our solution to this is to surround the
  * code with lguest_noirq_start: and lguest_noirq_end: labels.  We tell the
  * Host that it is *never* to interrupt us there, even if interrupts seem to be
- * enabled. */
+ * enabled.
+ */
 ENTRY(lguest_iret)
 	pushl	%eax
 	movl	12(%esp), %eax
 lguest_noirq_start:
-	/* Note the %ss: segment prefix here.  Normal data accesses use the
+	/*
+	 * Note the %ss: segment prefix here.  Normal data accesses use the
 	 * "ds" segment, but that will have already been restored for whatever
 	 * we're returning to (such as userspace): we can't trust it.  The %ss:
-	 * prefix makes sure we use the stack segment, which is still valid. */
+	 * prefix makes sure we use the stack segment, which is still valid.
+	 */
 	movl	%eax,%ss:lguest_data+LGUEST_DATA_irq_enabled
 	popl	%eax
 	iret
diff --git a/arch/x86/mm/highmem_32.c b/arch/x86/mm/highmem_32.c
index 58f621e..2112ed5 100644
--- a/arch/x86/mm/highmem_32.c
+++ b/arch/x86/mm/highmem_32.c
@@ -103,6 +103,7 @@ EXPORT_SYMBOL(kmap);
 EXPORT_SYMBOL(kunmap);
 EXPORT_SYMBOL(kmap_atomic);
 EXPORT_SYMBOL(kunmap_atomic);
+EXPORT_SYMBOL(kmap_atomic_prot);
 
 void __init set_highmem_pages_init(void)
 {
diff --git a/arch/x86/mm/pgtable.c b/arch/x86/mm/pgtable.c
index 8e43bdd..af8f965 100644
--- a/arch/x86/mm/pgtable.c
+++ b/arch/x86/mm/pgtable.c
@@ -25,7 +25,7 @@ pgtable_t pte_alloc_one(struct mm_struct *mm, unsigned long address)
 	return pte;
 }
 
-void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
+void ___pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
 {
 	pgtable_page_dtor(pte);
 	paravirt_release_pte(page_to_pfn(pte));
@@ -33,14 +33,14 @@ void __pte_free_tlb(struct mmu_gather *tlb, struct page *pte)
 }
 
 #if PAGETABLE_LEVELS > 2
-void __pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
+void ___pmd_free_tlb(struct mmu_gather *tlb, pmd_t *pmd)
 {
 	paravirt_release_pmd(__pa(pmd) >> PAGE_SHIFT);
 	tlb_remove_page(tlb, virt_to_page(pmd));
 }
 
 #if PAGETABLE_LEVELS > 3
-void __pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
+void ___pud_free_tlb(struct mmu_gather *tlb, pud_t *pud)
 {
 	paravirt_release_pud(__pa(pud) >> PAGE_SHIFT);
 	tlb_remove_page(tlb, virt_to_page(pud));
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index 2dfcbf9..dbb5381 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -79,8 +79,10 @@ static __init void bad_srat(void)
 	acpi_numa = -1;
 	for (i = 0; i < MAX_LOCAL_APIC; i++)
 		apicid_to_node[i] = NUMA_NO_NODE;
-	for (i = 0; i < MAX_NUMNODES; i++)
-		nodes_add[i].start = nodes[i].end = 0;
+	for (i = 0; i < MAX_NUMNODES; i++) {
+		nodes[i].start = nodes[i].end = 0;
+		nodes_add[i].start = nodes_add[i].end = 0;
+	}
 	remove_all_active_ranges();
 }
 
diff --git a/arch/xtensa/include/asm/tlb.h b/arch/xtensa/include/asm/tlb.h
index 31c220f..0d766f9 100644
--- a/arch/xtensa/include/asm/tlb.h
+++ b/arch/xtensa/include/asm/tlb.h
@@ -42,6 +42,6 @@
 
 #include <asm-generic/tlb.h>
 
-#define __pte_free_tlb(tlb, pte)		pte_free((tlb)->mm, pte)
+#define __pte_free_tlb(tlb, pte, address)	pte_free((tlb)->mm, pte)
 
 #endif	/* _XTENSA_TLB_H */
diff --git a/block/blk-core.c b/block/blk-core.c
index 4b45435..e3299a7 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -575,13 +575,6 @@ blk_init_queue_node(request_fn_proc *rfn, spinlock_t *lock, int node_id)
 		return NULL;
 	}
 
-	/*
-	 * if caller didn't supply a lock, they get per-queue locking with
-	 * our embedded lock
-	 */
-	if (!lock)
-		lock = &q->__queue_lock;
-
 	q->request_fn		= rfn;
 	q->prep_rq_fn		= NULL;
 	q->unplug_fn		= generic_unplug_device;
@@ -2143,7 +2136,7 @@ bool blk_end_request(struct request *rq, int error, unsigned int nr_bytes)
 {
 	return blk_end_bidi_request(rq, error, nr_bytes, 0);
 }
-EXPORT_SYMBOL_GPL(blk_end_request);
+EXPORT_SYMBOL(blk_end_request);
 
 /**
  * blk_end_request_all - Helper function for drives to finish the request.
@@ -2164,7 +2157,7 @@ void blk_end_request_all(struct request *rq, int error)
 	pending = blk_end_bidi_request(rq, error, blk_rq_bytes(rq), bidi_bytes);
 	BUG_ON(pending);
 }
-EXPORT_SYMBOL_GPL(blk_end_request_all);
+EXPORT_SYMBOL(blk_end_request_all);
 
 /**
  * blk_end_request_cur - Helper function to finish the current request chunk.
@@ -2182,7 +2175,7 @@ bool blk_end_request_cur(struct request *rq, int error)
 {
 	return blk_end_request(rq, error, blk_rq_cur_bytes(rq));
 }
-EXPORT_SYMBOL_GPL(blk_end_request_cur);
+EXPORT_SYMBOL(blk_end_request_cur);
 
 /**
  * __blk_end_request - Helper function for drivers to complete the request.
@@ -2201,7 +2194,7 @@ bool __blk_end_request(struct request *rq, int error, unsigned int nr_bytes)
 {
 	return __blk_end_bidi_request(rq, error, nr_bytes, 0);
 }
-EXPORT_SYMBOL_GPL(__blk_end_request);
+EXPORT_SYMBOL(__blk_end_request);
 
 /**
  * __blk_end_request_all - Helper function for drives to finish the request.
@@ -2222,7 +2215,7 @@ void __blk_end_request_all(struct request *rq, int error)
 	pending = __blk_end_bidi_request(rq, error, blk_rq_bytes(rq), bidi_bytes);
 	BUG_ON(pending);
 }
-EXPORT_SYMBOL_GPL(__blk_end_request_all);
+EXPORT_SYMBOL(__blk_end_request_all);
 
 /**
  * __blk_end_request_cur - Helper function to finish the current request chunk.
@@ -2241,7 +2234,7 @@ bool __blk_end_request_cur(struct request *rq, int error)
 {
 	return __blk_end_request(rq, error, blk_rq_cur_bytes(rq));
 }
-EXPORT_SYMBOL_GPL(__blk_end_request_cur);
+EXPORT_SYMBOL(__blk_end_request_cur);
 
 void blk_rq_bio_prep(struct request_queue *q, struct request *rq,
 		     struct bio *bio)
diff --git a/block/blk-integrity.c b/block/blk-integrity.c
index 73e28d3..15c6308 100644
--- a/block/blk-integrity.c
+++ b/block/blk-integrity.c
@@ -379,6 +379,7 @@ void blk_integrity_unregister(struct gendisk *disk)
 
 	kobject_uevent(&bi->kobj, KOBJ_REMOVE);
 	kobject_del(&bi->kobj);
+	kobject_put(&bi->kobj);
 	kmem_cache_free(integrity_cachep, bi);
 	disk->integrity = NULL;
 }
diff --git a/block/blk-settings.c b/block/blk-settings.c
index bd582a7..8a3ea3b 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -165,6 +165,13 @@ void blk_queue_make_request(struct request_queue *q, make_request_fn *mfn)
 	blk_set_default_limits(&q->limits);
 
 	/*
+	 * If the caller didn't supply a lock, fall back to our embedded
+	 * per-queue locks
+	 */
+	if (!q->queue_lock)
+		q->queue_lock = &q->__queue_lock;
+
+	/*
 	 * by default assume old behaviour and bounce for any highmem page
 	 */
 	blk_queue_bounce_limit(q, BLK_BOUNCE_HIGH);
diff --git a/crypto/async_tx/async_xor.c b/crypto/async_tx/async_xor.c
index 95fe2c8..90dd3f8 100644
--- a/crypto/async_tx/async_xor.c
+++ b/crypto/async_tx/async_xor.c
@@ -300,7 +300,7 @@ EXPORT_SYMBOL_GPL(async_xor_zero_sum);
 
 static int __init async_xor_init(void)
 {
-	#ifdef CONFIG_DMA_ENGINE
+	#ifdef CONFIG_ASYNC_TX_DMA
 	/* To conserve stack space the input src_list (array of page pointers)
 	 * is reused to hold the array of dma addresses passed to the driver.
 	 * This conversion is only possible when dma_addr_t is less than the
diff --git a/drivers/acpi/sleep.c b/drivers/acpi/sleep.c
index 01574a0..42159a2 100644
--- a/drivers/acpi/sleep.c
+++ b/drivers/acpi/sleep.c
@@ -397,6 +397,14 @@ static struct dmi_system_id __initdata acpisleep_dmi_table[] = {
 		},
 	},
 	{
+	.callback = init_set_sci_en_on_resume,
+	.ident = "Hewlett-Packard HP G7000 Notebook PC",
+	.matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "HP G7000 Notebook PC"),
+		},
+	},
+	{
 	.callback = init_old_suspend_ordering,
 	.ident = "Panasonic CF51-2L",
 	.matches = {
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 336eb1e..958c1fa 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -515,10 +515,14 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 	{ PCI_VDEVICE(INTEL, 0x3a05), board_ahci }, /* ICH10 */
 	{ PCI_VDEVICE(INTEL, 0x3a22), board_ahci }, /* ICH10 */
 	{ PCI_VDEVICE(INTEL, 0x3a25), board_ahci }, /* ICH10 */
+	{ PCI_VDEVICE(INTEL, 0x3b22), board_ahci }, /* PCH AHCI */
+	{ PCI_VDEVICE(INTEL, 0x3b23), board_ahci }, /* PCH AHCI */
 	{ PCI_VDEVICE(INTEL, 0x3b24), board_ahci }, /* PCH RAID */
 	{ PCI_VDEVICE(INTEL, 0x3b25), board_ahci }, /* PCH RAID */
+	{ PCI_VDEVICE(INTEL, 0x3b29), board_ahci }, /* PCH AHCI */
 	{ PCI_VDEVICE(INTEL, 0x3b2b), board_ahci }, /* PCH RAID */
 	{ PCI_VDEVICE(INTEL, 0x3b2c), board_ahci }, /* PCH RAID */
+	{ PCI_VDEVICE(INTEL, 0x3b2f), board_ahci }, /* PCH AHCI */
 
 	/* JMicron 360/1/3/5/6, match class to avoid IDE function */
 	{ PCI_VENDOR_ID_JMICRON, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index d0a14cf..56b8a3f 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -596,9 +596,12 @@ static const struct ich_laptop ich_laptop[] = {
 	{ 0x27DF, 0x0005, 0x0280 },	/* ICH7 on Acer 5602WLMi */
 	{ 0x27DF, 0x1025, 0x0102 },	/* ICH7 on Acer 5602aWLMi */
 	{ 0x27DF, 0x1025, 0x0110 },	/* ICH7 on Acer 3682WLMi */
+	{ 0x27DF, 0x1028, 0x02b0 },	/* ICH7 on unknown Dell */
 	{ 0x27DF, 0x1043, 0x1267 },	/* ICH7 on Asus W5F */
 	{ 0x27DF, 0x103C, 0x30A1 },	/* ICH7 on HP Compaq nc2400 */
+	{ 0x27DF, 0x103C, 0x361a },	/* ICH7 on unkown HP  */
 	{ 0x27DF, 0x1071, 0xD221 },	/* ICH7 on Hercules EC-900 */
+	{ 0x27DF, 0x152D, 0x0778 },	/* ICH7 on unknown Intel */
 	{ 0x24CA, 0x1025, 0x0061 },	/* ICH4 on ACER Aspire 2023WLMi */
 	{ 0x24CA, 0x1025, 0x003d },	/* ICH4 on ACER TM290 */
 	{ 0x266F, 0x1025, 0x0066 },	/* ICH6 on ACER Aspire 1694WLMi */
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 2c6aeda..8ac98ff 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1515,6 +1515,7 @@ static int ata_hpa_resize(struct ata_device *dev)
 
 		return rc;
 	}
+	dev->n_native_sectors = native_sectors;
 
 	/* nothing to do? */
 	if (native_sectors <= sectors || !ata_ignore_hpa) {
@@ -4099,6 +4100,7 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
 		       unsigned int readid_flags)
 {
 	u64 n_sectors = dev->n_sectors;
+	u64 n_native_sectors = dev->n_native_sectors;
 	int rc;
 
 	if (!ata_dev_enabled(dev))
@@ -4128,16 +4130,30 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
 	/* verify n_sectors hasn't changed */
 	if (dev->class == ATA_DEV_ATA && n_sectors &&
 	    dev->n_sectors != n_sectors) {
-		ata_dev_printk(dev, KERN_INFO, "n_sectors mismatch "
+		ata_dev_printk(dev, KERN_WARNING, "n_sectors mismatch "
 			       "%llu != %llu\n",
 			       (unsigned long long)n_sectors,
 			       (unsigned long long)dev->n_sectors);
-
-		/* restore original n_sectors */
-		dev->n_sectors = n_sectors;
-
-		rc = -ENODEV;
-		goto fail;
+		/*
+		 * Something could have caused HPA to be unlocked
+		 * involuntarily.  If n_native_sectors hasn't changed
+		 * and the new size matches it, keep the device.
+		 */
+		if (dev->n_native_sectors == n_native_sectors &&
+		    dev->n_sectors > n_sectors &&
+		    dev->n_sectors == n_native_sectors) {
+			ata_dev_printk(dev, KERN_WARNING,
+				       "new n_sectors matches native, probably "
+				       "late HPA unlock, continuing\n");
+			/* keep using the old n_sectors */
+			dev->n_sectors = n_sectors;
+		} else {
+			/* restore original n_[native]_sectors and fail */
+			dev->n_native_sectors = n_native_sectors;
+			dev->n_sectors = n_sectors;
+			rc = -ENODEV;
+			goto fail;
+		}
 	}
 
 	return 0;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 1a07c06..79711b6 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2327,7 +2327,7 @@ int ata_eh_reset(struct ata_link *link, int classify,
 	struct ata_port *ap = link->ap;
 	struct ata_link *slave = ap->slave_link;
 	struct ata_eh_context *ehc = &link->eh_context;
-	struct ata_eh_context *sehc = &slave->eh_context;
+	struct ata_eh_context *sehc = slave ? &slave->eh_context : NULL;
 	unsigned int *classes = ehc->classes;
 	unsigned int lflags = link->flags;
 	int verbose = !(ehc->i.flags & ATA_EHI_QUIET);
diff --git a/drivers/ata/pata_at91.c b/drivers/ata/pata_at91.c
index 8561a9f..5702aff 100644
--- a/drivers/ata/pata_at91.c
+++ b/drivers/ata/pata_at91.c
@@ -26,9 +26,7 @@
 #include <linux/platform_device.h>
 #include <linux/ata_platform.h>
 
-#include <mach/at91sam9260_matrix.h>
 #include <mach/at91sam9_smc.h>
-#include <mach/at91sam9260.h>
 #include <mach/board.h>
 #include <mach/gpio.h>
 
@@ -44,65 +42,62 @@ struct at91_ide_info {
 	unsigned long mode;
 	unsigned int cs;
 
+	struct clk *mck;
+
 	void __iomem *ide_addr;
 	void __iomem *alt_addr;
 };
 
-const struct ata_timing initial_timing =
+static const struct ata_timing initial_timing =
 	{XFER_PIO_0, 70, 290, 240, 600, 165, 150, 600, 0};
 
-static unsigned int calc_mck_cycles(unsigned int ns, unsigned int mck_hz)
+static unsigned long calc_mck_cycles(unsigned long ns, unsigned long mck_hz)
 {
 	unsigned long mul;
 
-    /*
-     * cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] =
-     *     x * (f / 1_000_000_000) =
-     *     x * ((f * 65536) / 1_000_000_000) / 65536 =
-     *     x * (((f / 10_000) * 65536) / 100_000) / 65536 =
-     */
+	/*
+	* cycles = x [nsec] * f [Hz] / 10^9 [ns in sec] =
+	*     x * (f / 1_000_000_000) =
+	*     x * ((f * 65536) / 1_000_000_000) / 65536 =
+	*     x * (((f / 10_000) * 65536) / 100_000) / 65536 =
+	*/
 
-    mul = (mck_hz / 10000) << 16;
-    mul /= 100000;
+	mul = (mck_hz / 10000) << 16;
+	mul /= 100000;
 
-    return (ns * mul + 65536) >> 16;    /* rounding */
+	return (ns * mul + 65536) >> 16;    /* rounding */
 }
 
 static void set_smc_mode(struct at91_ide_info *info)
 {
-    at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
-    return;
+	at91_sys_write(AT91_SMC_MODE(info->cs), info->mode);
+	return;
 }
 
 static void set_smc_timing(struct device *dev,
 		struct at91_ide_info *info, const struct ata_timing *ata)
 {
-	int read_cycle, write_cycle, active, recover;
-	int nrd_setup, nrd_pulse, nrd_recover;
-	int nwe_setup, nwe_pulse;
+	unsigned long read_cycle, write_cycle, active, recover;
+	unsigned long nrd_setup, nrd_pulse, nrd_recover;
+	unsigned long nwe_setup, nwe_pulse;
 
-	int ncs_write_setup, ncs_write_pulse;
-	int ncs_read_setup, ncs_read_pulse;
+	unsigned long ncs_write_setup, ncs_write_pulse;
+	unsigned long ncs_read_setup, ncs_read_pulse;
 
-	unsigned int mck_hz;
-	struct clk *mck;
+	unsigned long mck_hz;
 
 	read_cycle  = ata->cyc8b;
 	nrd_setup   = ata->setup;
 	nrd_pulse   = ata->act8b;
 	nrd_recover = ata->rec8b;
 
-	mck = clk_get(NULL, "mck");
-	BUG_ON(IS_ERR(mck));
-	mck_hz = clk_get_rate(mck);
+	mck_hz = clk_get_rate(info->mck);
 
 	read_cycle  = calc_mck_cycles(read_cycle, mck_hz);
 	nrd_setup   = calc_mck_cycles(nrd_setup, mck_hz);
 	nrd_pulse   = calc_mck_cycles(nrd_pulse, mck_hz);
 	nrd_recover = calc_mck_cycles(nrd_recover, mck_hz);
 
-	clk_put(mck);
-
 	active  = nrd_setup + nrd_pulse;
 	recover = read_cycle - active;
 
@@ -121,13 +116,13 @@ static void set_smc_timing(struct device *dev,
 	ncs_write_setup = ncs_read_setup;
 	ncs_write_pulse = ncs_read_pulse;
 
-	dev_dbg(dev, "ATA timings: nrd_setup = %d nrd_pulse = %d nrd_cycle = %d\n",
+	dev_dbg(dev, "ATA timings: nrd_setup = %lu nrd_pulse = %lu nrd_cycle = %lu\n",
 			nrd_setup, nrd_pulse, read_cycle);
-	dev_dbg(dev, "ATA timings: nwe_setup = %d nwe_pulse = %d nwe_cycle = %d\n",
+	dev_dbg(dev, "ATA timings: nwe_setup = %lu nwe_pulse = %lu nwe_cycle = %lu\n",
 			nwe_setup, nwe_pulse, write_cycle);
-	dev_dbg(dev, "ATA timings: ncs_read_setup = %d ncs_read_pulse = %d\n",
+	dev_dbg(dev, "ATA timings: ncs_read_setup = %lu ncs_read_pulse = %lu\n",
 			ncs_read_setup, ncs_read_pulse);
-	dev_dbg(dev, "ATA timings: ncs_write_setup = %d ncs_write_pulse = %d\n",
+	dev_dbg(dev, "ATA timings: ncs_write_setup = %lu ncs_write_pulse = %lu\n",
 			ncs_write_setup, ncs_write_pulse);
 
 	at91_sys_write(AT91_SMC_SETUP(info->cs),
@@ -217,6 +212,7 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
 	struct resource *mem_res;
 	struct ata_host *host;
 	struct ata_port *ap;
+
 	int irq_flags = 0;
 	int irq = 0;
 	int ret;
@@ -261,6 +257,13 @@ static int __devinit pata_at91_probe(struct platform_device *pdev)
 		return -ENOMEM;
 	}
 
+	info->mck = clk_get(NULL, "mck");
+
+	if (IS_ERR(info->mck)) {
+		dev_err(dev, "failed to get access to mck clock\n");
+		return -ENODEV;
+	}
+
 	info->cs    = board->chipselect;
 	info->mode  = AT91_SMC_READMODE | AT91_SMC_WRITEMODE |
 		AT91_SMC_EXNWMODE_READY | AT91_SMC_BAT_SELECT |
@@ -304,6 +307,7 @@ err_alt_ioremap:
 	devm_iounmap(dev, info->ide_addr);
 
 err_ide_ioremap:
+	clk_put(info->mck);
 	kfree(info);
 
 	return ret;
@@ -326,6 +330,7 @@ static int __devexit pata_at91_remove(struct platform_device *pdev)
 
 	devm_iounmap(dev, info->ide_addr);
 	devm_iounmap(dev, info->alt_addr);
+	clk_put(info->mck);
 
 	kfree(info);
 	return 0;
diff --git a/drivers/ata/pata_octeon_cf.c b/drivers/ata/pata_octeon_cf.c
index 8d9343a..abdd19f 100644
--- a/drivers/ata/pata_octeon_cf.c
+++ b/drivers/ata/pata_octeon_cf.c
@@ -653,7 +653,8 @@ static irqreturn_t octeon_cf_interrupt(int irq, void *dev_instance)
 
 		ap = host->ports[i];
 		ocd = ap->dev->platform_data;
-		if (!ap || (ap->flags & ATA_FLAG_DISABLED))
+
+		if (ap->flags & ATA_FLAG_DISABLED)
 			continue;
 
 		ocd = ap->dev->platform_data;
diff --git a/drivers/ata/pata_pcmcia.c b/drivers/ata/pata_pcmcia.c
index f4d009e..dc99e26 100644
--- a/drivers/ata/pata_pcmcia.c
+++ b/drivers/ata/pata_pcmcia.c
@@ -411,6 +411,7 @@ static struct pcmcia_device_id pcmcia_devices[] = {
 	PCMCIA_DEVICE_PROD_ID123("PCMCIA", "IDE CARD", "F1", 0x281f1c5d, 0x1907960c, 0xf7fde8b9),
 	PCMCIA_DEVICE_PROD_ID12("ARGOSY", "CD-ROM", 0x78f308dc, 0x66536591),
 	PCMCIA_DEVICE_PROD_ID12("ARGOSY", "PnPIDE", 0x78f308dc, 0x0c694728),
+	PCMCIA_DEVICE_PROD_ID12("CNF   ", "CD-ROM", 0x46d7db81, 0x66536591),
 	PCMCIA_DEVICE_PROD_ID12("CNF CD-M", "CD-ROM", 0x7d93b852, 0x66536591),
 	PCMCIA_DEVICE_PROD_ID12("Creative Technology Ltd.", "PCMCIA CD-ROM Interface Card", 0xff8c8a45, 0xfe8020c4),
 	PCMCIA_DEVICE_PROD_ID12("Digital Equipment Corporation.", "Digital Mobile Media CD-ROM", 0x17692a66, 0xef1dcbde),
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 23714ae..c19417e 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -2514,7 +2514,7 @@ static void mv_unexpected_intr(struct ata_port *ap, int edma_was_enabled)
 	char *when = "idle";
 
 	ata_ehi_clear_desc(ehi);
-	if (!ap || (ap->flags & ATA_FLAG_DISABLED)) {
+	if (ap->flags & ATA_FLAG_DISABLED) {
 		when = "disabled";
 	} else if (edma_was_enabled) {
 		when = "EDMA enabled";
diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c
index 030ec07..35bd5cc 100644
--- a/drivers/ata/sata_sil.c
+++ b/drivers/ata/sata_sil.c
@@ -532,7 +532,7 @@ static irqreturn_t sil_interrupt(int irq, void *dev_instance)
 		struct ata_port *ap = host->ports[i];
 		u32 bmdma2 = readl(mmio_base + sil_port[ap->port_no].bmdma2);
 
-		if (unlikely(!ap || ap->flags & ATA_FLAG_DISABLED))
+		if (unlikely(ap->flags & ATA_FLAG_DISABLED))
 			continue;
 
 		/* turn off SATA_IRQ if not supported */
diff --git a/drivers/base/firmware_class.c b/drivers/base/firmware_class.c
index f285f44..7376367 100644
--- a/drivers/base/firmware_class.c
+++ b/drivers/base/firmware_class.c
@@ -180,7 +180,6 @@ static ssize_t firmware_loading_store(struct device *dev,
 				goto err;
 			}
 			/* Pages will be freed by vfree() */
-			fw_priv->pages = NULL;
 			fw_priv->page_array_size = 0;
 			fw_priv->nr_pages = 0;
 			complete(&fw_priv->completion);
diff --git a/drivers/base/sys.c b/drivers/base/sys.c
index 79a9ae5..0d90390 100644
--- a/drivers/base/sys.c
+++ b/drivers/base/sys.c
@@ -275,9 +275,9 @@ int sysdev_register(struct sys_device *sysdev)
 				drv->add(sysdev);
 		}
 		mutex_unlock(&sysdev_drivers_lock);
+		kobject_uevent(&sysdev->kobj, KOBJ_ADD);
 	}
 
-	kobject_uevent(&sysdev->kobj, KOBJ_ADD);
 	return error;
 }
 
diff --git a/drivers/block/mg_disk.c b/drivers/block/mg_disk.c
index f703f54..6d7fbaa 100644
--- a/drivers/block/mg_disk.c
+++ b/drivers/block/mg_disk.c
@@ -36,7 +36,6 @@
 
 /* Register offsets */
 #define MG_BUFF_OFFSET			0x8000
-#define MG_STORAGE_BUFFER_SIZE		0x200
 #define MG_REG_OFFSET			0xC000
 #define MG_REG_FEATURE			(MG_REG_OFFSET + 2)	/* write case */
 #define MG_REG_ERROR			(MG_REG_OFFSET + 2)	/* read case */
@@ -219,6 +218,16 @@ static unsigned int mg_wait(struct mg_host *host, u32 expect, u32 msec)
 	host->error = MG_ERR_NONE;
 	expire = jiffies + msecs_to_jiffies(msec);
 
+	/* These 2 times dummy status read prevents reading invalid
+	 * status. A very little time (3 times of mflash operating clk)
+	 * is required for busy bit is set. Use dummy read instead of
+	 * busy wait, because mflash's PLL is machine dependent.
+	 */
+	if (prv_data->use_polling) {
+		status = inb((unsigned long)host->dev_base + MG_REG_STATUS);
+		status = inb((unsigned long)host->dev_base + MG_REG_STATUS);
+	}
+
 	status = inb((unsigned long)host->dev_base + MG_REG_STATUS);
 
 	do {
@@ -245,8 +254,6 @@ static unsigned int mg_wait(struct mg_host *host, u32 expect, u32 msec)
 			mg_dump_status("not ready", status, host);
 			return MG_ERR_INV_STAT;
 		}
-		if (prv_data->use_polling)
-			msleep(1);
 
 		status = inb((unsigned long)host->dev_base + MG_REG_STATUS);
 	} while (time_before(cur_jiffies, expire));
@@ -469,9 +476,18 @@ static unsigned int mg_out(struct mg_host *host,
 	return MG_ERR_NONE;
 }
 
+static void mg_read_one(struct mg_host *host, struct request *req)
+{
+	u16 *buff = (u16 *)req->buffer;
+	u32 i;
+
+	for (i = 0; i < MG_SECTOR_SIZE >> 1; i++)
+		*buff++ = inw((unsigned long)host->dev_base + MG_BUFF_OFFSET +
+			      (i << 1));
+}
+
 static void mg_read(struct request *req)
 {
-	u32 j;
 	struct mg_host *host = req->rq_disk->private_data;
 
 	if (mg_out(host, blk_rq_pos(req), blk_rq_sectors(req),
@@ -482,49 +498,65 @@ static void mg_read(struct request *req)
 	       blk_rq_sectors(req), blk_rq_pos(req), req->buffer);
 
 	do {
-		u16 *buff = (u16 *)req->buffer;
-
 		if (mg_wait(host, ATA_DRQ,
 			    MG_TMAX_WAIT_RD_DRQ) != MG_ERR_NONE) {
 			mg_bad_rw_intr(host);
 			return;
 		}
-		for (j = 0; j < MG_SECTOR_SIZE >> 1; j++)
-			*buff++ = inw((unsigned long)host->dev_base +
-				      MG_BUFF_OFFSET + (j << 1));
+
+		mg_read_one(host, req);
 
 		outb(MG_CMD_RD_CONF, (unsigned long)host->dev_base +
 				MG_REG_COMMAND);
 	} while (mg_end_request(host, 0, MG_SECTOR_SIZE));
 }
 
+static void mg_write_one(struct mg_host *host, struct request *req)
+{
+	u16 *buff = (u16 *)req->buffer;
+	u32 i;
+
+	for (i = 0; i < MG_SECTOR_SIZE >> 1; i++)
+		outw(*buff++, (unsigned long)host->dev_base + MG_BUFF_OFFSET +
+		     (i << 1));
+}
+
 static void mg_write(struct request *req)
 {
-	u32 j;
 	struct mg_host *host = req->rq_disk->private_data;
+	unsigned int rem = blk_rq_sectors(req);
 
-	if (mg_out(host, blk_rq_pos(req), blk_rq_sectors(req),
+	if (mg_out(host, blk_rq_pos(req), rem,
 		   MG_CMD_WR, NULL) != MG_ERR_NONE) {
 		mg_bad_rw_intr(host);
 		return;
 	}
 
 	MG_DBG("requested %d sects (from %ld), buffer=0x%p\n",
-	       blk_rq_sectors(req), blk_rq_pos(req), req->buffer);
+	       rem, blk_rq_pos(req), req->buffer);
+
+	if (mg_wait(host, ATA_DRQ,
+		    MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) {
+		mg_bad_rw_intr(host);
+		return;
+	}
 
 	do {
-		u16 *buff = (u16 *)req->buffer;
+		mg_write_one(host, req);
 
-	if (mg_wait(host, ATA_DRQ, MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) {
+		outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base +
+				MG_REG_COMMAND);
+
+		rem--;
+		if (rem > 1 && mg_wait(host, ATA_DRQ,
+					MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) {
+			mg_bad_rw_intr(host);
+			return;
+		} else if (mg_wait(host, MG_STAT_READY,
+					MG_TMAX_WAIT_WR_DRQ) != MG_ERR_NONE) {
 			mg_bad_rw_intr(host);
 			return;
 		}
-		for (j = 0; j < MG_SECTOR_SIZE >> 1; j++)
-			outw(*buff++, (unsigned long)host->dev_base +
-				      MG_BUFF_OFFSET + (j << 1));
-
-		outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base +
-				MG_REG_COMMAND);
 	} while (mg_end_request(host, 0, MG_SECTOR_SIZE));
 }
 
@@ -532,7 +564,6 @@ static void mg_read_intr(struct mg_host *host)
 {
 	struct request *req = host->req;
 	u32 i;
-	u16 *buff;
 
 	/* check status */
 	do {
@@ -550,13 +581,7 @@ static void mg_read_intr(struct mg_host *host)
 	return;
 
 ok_to_read:
-	/* get current segment of request */
-	buff = (u16 *)req->buffer;
-
-	/* read 1 sector */
-	for (i = 0; i < MG_SECTOR_SIZE >> 1; i++)
-		*buff++ = inw((unsigned long)host->dev_base + MG_BUFF_OFFSET +
-			      (i << 1));
+	mg_read_one(host, req);
 
 	MG_DBG("sector %ld, remaining=%ld, buffer=0x%p\n",
 	       blk_rq_pos(req), blk_rq_sectors(req) - 1, req->buffer);
@@ -575,8 +600,7 @@ ok_to_read:
 static void mg_write_intr(struct mg_host *host)
 {
 	struct request *req = host->req;
-	u32 i, j;
-	u16 *buff;
+	u32 i;
 	bool rem;
 
 	/* check status */
@@ -597,12 +621,7 @@ static void mg_write_intr(struct mg_host *host)
 ok_to_write:
 	if ((rem = mg_end_request(host, 0, MG_SECTOR_SIZE))) {
 		/* write 1 sector and set handler if remains */
-		buff = (u16 *)req->buffer;
-		for (j = 0; j < MG_STORAGE_BUFFER_SIZE >> 1; j++) {
-			outw(*buff, (unsigned long)host->dev_base +
-					MG_BUFF_OFFSET + (j << 1));
-			buff++;
-		}
+		mg_write_one(host, req);
 		MG_DBG("sector %ld, remaining=%ld, buffer=0x%p\n",
 		       blk_rq_pos(req), blk_rq_sectors(req), req->buffer);
 		host->mg_do_intr = mg_write_intr;
@@ -667,9 +686,6 @@ static unsigned int mg_issue_req(struct request *req,
 		unsigned int sect_num,
 		unsigned int sect_cnt)
 {
-	u16 *buff;
-	u32 i;
-
 	switch (rq_data_dir(req)) {
 	case READ:
 		if (mg_out(host, sect_num, sect_cnt, MG_CMD_RD, &mg_read_intr)
@@ -693,12 +709,7 @@ static unsigned int mg_issue_req(struct request *req,
 			mg_bad_rw_intr(host);
 			return host->error;
 		}
-		buff = (u16 *)req->buffer;
-		for (i = 0; i < MG_SECTOR_SIZE >> 1; i++) {
-			outw(*buff, (unsigned long)host->dev_base +
-					MG_BUFF_OFFSET + (i << 1));
-			buff++;
-		}
+		mg_write_one(host, req);
 		mod_timer(&host->timer, jiffies + 3 * HZ);
 		outb(MG_CMD_WR_CONF, (unsigned long)host->dev_base +
 				MG_REG_COMMAND);
diff --git a/drivers/char/n_tty.c b/drivers/char/n_tty.c
index ff47907..973be2f 100644
--- a/drivers/char/n_tty.c
+++ b/drivers/char/n_tty.c
@@ -1583,6 +1583,7 @@ static int n_tty_open(struct tty_struct *tty)
 
 static inline int input_available_p(struct tty_struct *tty, int amt)
 {
+	tty_flush_to_ldisc(tty);
 	if (tty->icanon) {
 		if (tty->canon_data)
 			return 1;
diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c
index 0db3585..5d7a02f 100644
--- a/drivers/char/sysrq.c
+++ b/drivers/char/sysrq.c
@@ -35,7 +35,6 @@
 #include <linux/spinlock.h>
 #include <linux/vt_kern.h>
 #include <linux/workqueue.h>
-#include <linux/kexec.h>
 #include <linux/hrtimer.h>
 #include <linux/oom.h>
 
@@ -124,9 +123,12 @@ static struct sysrq_key_op sysrq_unraw_op = {
 static void sysrq_handle_crash(int key, struct tty_struct *tty)
 {
 	char *killer = NULL;
+
+	panic_on_oops = 1;	/* force panic */
+	wmb();
 	*killer = 1;
 }
-static struct sysrq_key_op sysrq_crashdump_op = {
+static struct sysrq_key_op sysrq_crash_op = {
 	.handler	= sysrq_handle_crash,
 	.help_msg	= "Crash",
 	.action_msg	= "Trigger a crash",
@@ -401,7 +403,7 @@ static struct sysrq_key_op *sysrq_key_table[36] = {
 	 */
 	NULL,				/* a */
 	&sysrq_reboot_op,		/* b */
-	&sysrq_crashdump_op,		/* c & ibm_emac driver debug */
+	&sysrq_crash_op,		/* c & ibm_emac driver debug */
 	&sysrq_showlocks_op,		/* d */
 	&sysrq_term_op,			/* e */
 	&sysrq_moom_op,			/* f */
diff --git a/drivers/char/tty_buffer.c b/drivers/char/tty_buffer.c
index 810ee25..3108991 100644
--- a/drivers/char/tty_buffer.c
+++ b/drivers/char/tty_buffer.c
@@ -462,6 +462,19 @@ static void flush_to_ldisc(struct work_struct *work)
 }
 
 /**
+ *	tty_flush_to_ldisc
+ *	@tty: tty to push
+ *
+ *	Push the terminal flip buffers to the line discipline.
+ *
+ *	Must not be called from IRQ context.
+ */
+void tty_flush_to_ldisc(struct tty_struct *tty)
+{
+	flush_to_ldisc(&tty->buf.work.work);
+}
+
+/**
  *	tty_flip_buffer_push	-	terminal
  *	@tty: tty to push
  *
diff --git a/drivers/char/vr41xx_giu.c b/drivers/char/vr41xx_giu.c
deleted file mode 100644
index e69de29..0000000
--- a/drivers/char/vr41xx_giu.c
+++ /dev/null
diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig
index 070357a..81e1020 100644
--- a/drivers/dma/Kconfig
+++ b/drivers/dma/Kconfig
@@ -4,7 +4,7 @@
 
 menuconfig DMADEVICES
 	bool "DMA Engine support"
-	depends on !HIGHMEM64G && HAS_DMA
+	depends on HAS_DMA
 	help
 	  DMA engines can do asynchronous data transfers without
 	  involving the host CPU.  Currently, this framework can be
@@ -46,6 +46,14 @@ config DW_DMAC
 	  Support the Synopsys DesignWare AHB DMA controller.  This
 	  can be integrated in chips such as the Atmel AT32ap7000.
 
+config AT_HDMAC
+	tristate "Atmel AHB DMA support"
+	depends on ARCH_AT91SAM9RL
+	select DMA_ENGINE
+	help
+	  Support the Atmel AHB DMA controller.  This can be integrated in
+	  chips such as the Atmel AT91SAM9RL.
+
 config FSL_DMA
 	tristate "Freescale Elo and Elo Plus DMA support"
 	depends on FSL_SOC
@@ -108,7 +116,7 @@ config NET_DMA
 
 config ASYNC_TX_DMA
 	bool "Async_tx: Offload support for the async_tx api"
-	depends on DMA_ENGINE
+	depends on DMA_ENGINE && !HIGHMEM64G
 	help
 	  This allows the async_tx api to take advantage of offload engines for
 	  memcpy, memset, xor, and raid6 p+q operations.  If your platform has
diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile
index a0b6564..40e1e00 100644
--- a/drivers/dma/Makefile
+++ b/drivers/dma/Makefile
@@ -7,5 +7,6 @@ obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o
 obj-$(CONFIG_FSL_DMA) += fsldma.o
 obj-$(CONFIG_MV_XOR) += mv_xor.o
 obj-$(CONFIG_DW_DMAC) += dw_dmac.o
+obj-$(CONFIG_AT_HDMAC) += at_hdmac.o
 obj-$(CONFIG_MX3_IPU) += ipu/
 obj-$(CONFIG_TXX9_DMAC) += txx9dmac.o
diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c
new file mode 100644
index 0000000..9a1e5fb
--- /dev/null
+++ b/drivers/dma/at_hdmac.c
@@ -0,0 +1,1213 @@
+/*
+ * Driver for the Atmel AHB DMA Controller (aka HDMA or DMAC on AT91 systems)
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ *
+ * This supports the Atmel AHB DMA Controller,
+ *
+ * The driver has currently been tested with the Atmel AT91SAM9RL
+ * and AT91SAM9G45 series.
+ */
+
+#include <linux/clk.h>
+#include <linux/dmaengine.h>
+#include <linux/dma-mapping.h>
+#include <linux/dmapool.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#include "at_hdmac_regs.h"
+
+/*
+ * Glossary
+ * --------
+ *
+ * at_hdmac		: Name of the ATmel AHB DMA Controller
+ * at_dma_ / atdma	: ATmel DMA controller entity related
+ * atc_	/ atchan	: ATmel DMA Channel entity related
+ */
+
+#define	ATC_DEFAULT_CFG		(ATC_FIFOCFG_HALFFIFO)
+#define	ATC_DEFAULT_CTRLA	(0)
+#define	ATC_DEFAULT_CTRLB	(ATC_SIF(0)	\
+				|ATC_DIF(1))
+
+/*
+ * Initial number of descriptors to allocate for each channel. This could
+ * be increased during dma usage.
+ */
+static unsigned int init_nr_desc_per_channel = 64;
+module_param(init_nr_desc_per_channel, uint, 0644);
+MODULE_PARM_DESC(init_nr_desc_per_channel,
+		 "initial descriptors per channel (default: 64)");
+
+
+/* prototypes */
+static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx);
+
+
+/*----------------------------------------------------------------------*/
+
+static struct at_desc *atc_first_active(struct at_dma_chan *atchan)
+{
+	return list_first_entry(&atchan->active_list,
+				struct at_desc, desc_node);
+}
+
+static struct at_desc *atc_first_queued(struct at_dma_chan *atchan)
+{
+	return list_first_entry(&atchan->queue,
+				struct at_desc, desc_node);
+}
+
+/**
+ * atc_alloc_descriptor - allocate and return an initilized descriptor
+ * @chan: the channel to allocate descriptors for
+ * @gfp_flags: GFP allocation flags
+ *
+ * Note: The ack-bit is positioned in the descriptor flag at creation time
+ *       to make initial allocation more convenient. This bit will be cleared
+ *       and control will be given to client at usage time (during
+ *       preparation functions).
+ */
+static struct at_desc *atc_alloc_descriptor(struct dma_chan *chan,
+					    gfp_t gfp_flags)
+{
+	struct at_desc	*desc = NULL;
+	struct at_dma	*atdma = to_at_dma(chan->device);
+	dma_addr_t phys;
+
+	desc = dma_pool_alloc(atdma->dma_desc_pool, gfp_flags, &phys);
+	if (desc) {
+		memset(desc, 0, sizeof(struct at_desc));
+		dma_async_tx_descriptor_init(&desc->txd, chan);
+		/* txd.flags will be overwritten in prep functions */
+		desc->txd.flags = DMA_CTRL_ACK;
+		desc->txd.tx_submit = atc_tx_submit;
+		desc->txd.phys = phys;
+	}
+
+	return desc;
+}
+
+/**
+ * atc_desc_get - get a unsused descriptor from free_list
+ * @atchan: channel we want a new descriptor for
+ */
+static struct at_desc *atc_desc_get(struct at_dma_chan *atchan)
+{
+	struct at_desc *desc, *_desc;
+	struct at_desc *ret = NULL;
+	unsigned int i = 0;
+	LIST_HEAD(tmp_list);
+
+	spin_lock_bh(&atchan->lock);
+	list_for_each_entry_safe(desc, _desc, &atchan->free_list, desc_node) {
+		i++;
+		if (async_tx_test_ack(&desc->txd)) {
+			list_del(&desc->desc_node);
+			ret = desc;
+			break;
+		}
+		dev_dbg(chan2dev(&atchan->chan_common),
+				"desc %p not ACKed\n", desc);
+	}
+	spin_unlock_bh(&atchan->lock);
+	dev_vdbg(chan2dev(&atchan->chan_common),
+		"scanned %u descriptors on freelist\n", i);
+
+	/* no more descriptor available in initial pool: create one more */
+	if (!ret) {
+		ret = atc_alloc_descriptor(&atchan->chan_common, GFP_ATOMIC);
+		if (ret) {
+			spin_lock_bh(&atchan->lock);
+			atchan->descs_allocated++;
+			spin_unlock_bh(&atchan->lock);
+		} else {
+			dev_err(chan2dev(&atchan->chan_common),
+					"not enough descriptors available\n");
+		}
+	}
+
+	return ret;
+}
+
+/**
+ * atc_desc_put - move a descriptor, including any children, to the free list
+ * @atchan: channel we work on
+ * @desc: descriptor, at the head of a chain, to move to free list
+ */
+static void atc_desc_put(struct at_dma_chan *atchan, struct at_desc *desc)
+{
+	if (desc) {
+		struct at_desc *child;
+
+		spin_lock_bh(&atchan->lock);
+		list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+			dev_vdbg(chan2dev(&atchan->chan_common),
+					"moving child desc %p to freelist\n",
+					child);
+		list_splice_init(&desc->txd.tx_list, &atchan->free_list);
+		dev_vdbg(chan2dev(&atchan->chan_common),
+			 "moving desc %p to freelist\n", desc);
+		list_add(&desc->desc_node, &atchan->free_list);
+		spin_unlock_bh(&atchan->lock);
+	}
+}
+
+/**
+ * atc_assign_cookie - compute and assign new cookie
+ * @atchan: channel we work on
+ * @desc: descriptor to asign cookie for
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static dma_cookie_t
+atc_assign_cookie(struct at_dma_chan *atchan, struct at_desc *desc)
+{
+	dma_cookie_t cookie = atchan->chan_common.cookie;
+
+	if (++cookie < 0)
+		cookie = 1;
+
+	atchan->chan_common.cookie = cookie;
+	desc->txd.cookie = cookie;
+
+	return cookie;
+}
+
+/**
+ * atc_dostart - starts the DMA engine for real
+ * @atchan: the channel we want to start
+ * @first: first descriptor in the list we want to begin with
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_dostart(struct at_dma_chan *atchan, struct at_desc *first)
+{
+	struct at_dma	*atdma = to_at_dma(atchan->chan_common.device);
+
+	/* ASSERT:  channel is idle */
+	if (atc_chan_is_enabled(atchan)) {
+		dev_err(chan2dev(&atchan->chan_common),
+			"BUG: Attempted to start non-idle channel\n");
+		dev_err(chan2dev(&atchan->chan_common),
+			"  channel: s0x%x d0x%x ctrl0x%x:0x%x l0x%x\n",
+			channel_readl(atchan, SADDR),
+			channel_readl(atchan, DADDR),
+			channel_readl(atchan, CTRLA),
+			channel_readl(atchan, CTRLB),
+			channel_readl(atchan, DSCR));
+
+		/* The tasklet will hopefully advance the queue... */
+		return;
+	}
+
+	vdbg_dump_regs(atchan);
+
+	/* clear any pending interrupt */
+	while (dma_readl(atdma, EBCISR))
+		cpu_relax();
+
+	channel_writel(atchan, SADDR, 0);
+	channel_writel(atchan, DADDR, 0);
+	channel_writel(atchan, CTRLA, 0);
+	channel_writel(atchan, CTRLB, 0);
+	channel_writel(atchan, DSCR, first->txd.phys);
+	dma_writel(atdma, CHER, atchan->mask);
+
+	vdbg_dump_regs(atchan);
+}
+
+/**
+ * atc_chain_complete - finish work for one transaction chain
+ * @atchan: channel we work on
+ * @desc: descriptor at the head of the chain we want do complete
+ *
+ * Called with atchan->lock held and bh disabled */
+static void
+atc_chain_complete(struct at_dma_chan *atchan, struct at_desc *desc)
+{
+	dma_async_tx_callback		callback;
+	void				*param;
+	struct dma_async_tx_descriptor	*txd = &desc->txd;
+
+	dev_vdbg(chan2dev(&atchan->chan_common),
+		"descriptor %u complete\n", txd->cookie);
+
+	atchan->completed_cookie = txd->cookie;
+	callback = txd->callback;
+	param = txd->callback_param;
+
+	/* move children to free_list */
+	list_splice_init(&txd->tx_list, &atchan->free_list);
+	/* move myself to free_list */
+	list_move(&desc->desc_node, &atchan->free_list);
+
+	/* unmap dma addresses */
+	if (!(txd->flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
+		if (txd->flags & DMA_COMPL_DEST_UNMAP_SINGLE)
+			dma_unmap_single(chan2parent(&atchan->chan_common),
+					desc->lli.daddr,
+					desc->len, DMA_FROM_DEVICE);
+		else
+			dma_unmap_page(chan2parent(&atchan->chan_common),
+					desc->lli.daddr,
+					desc->len, DMA_FROM_DEVICE);
+	}
+	if (!(txd->flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+		if (txd->flags & DMA_COMPL_SRC_UNMAP_SINGLE)
+			dma_unmap_single(chan2parent(&atchan->chan_common),
+					desc->lli.saddr,
+					desc->len, DMA_TO_DEVICE);
+		else
+			dma_unmap_page(chan2parent(&atchan->chan_common),
+					desc->lli.saddr,
+					desc->len, DMA_TO_DEVICE);
+	}
+
+	/*
+	 * The API requires that no submissions are done from a
+	 * callback, so we don't need to drop the lock here
+	 */
+	if (callback)
+		callback(param);
+
+	dma_run_dependencies(txd);
+}
+
+/**
+ * atc_complete_all - finish work for all transactions
+ * @atchan: channel to complete transactions for
+ *
+ * Eventually submit queued descriptors if any
+ *
+ * Assume channel is idle while calling this function
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_complete_all(struct at_dma_chan *atchan)
+{
+	struct at_desc *desc, *_desc;
+	LIST_HEAD(list);
+
+	dev_vdbg(chan2dev(&atchan->chan_common), "complete all\n");
+
+	BUG_ON(atc_chan_is_enabled(atchan));
+
+	/*
+	 * Submit queued descriptors ASAP, i.e. before we go through
+	 * the completed ones.
+	 */
+	if (!list_empty(&atchan->queue))
+		atc_dostart(atchan, atc_first_queued(atchan));
+	/* empty active_list now it is completed */
+	list_splice_init(&atchan->active_list, &list);
+	/* empty queue list by moving descriptors (if any) to active_list */
+	list_splice_init(&atchan->queue, &atchan->active_list);
+
+	list_for_each_entry_safe(desc, _desc, &list, desc_node)
+		atc_chain_complete(atchan, desc);
+}
+
+/**
+ * atc_cleanup_descriptors - cleanup up finished descriptors in active_list
+ * @atchan: channel to be cleaned up
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_cleanup_descriptors(struct at_dma_chan *atchan)
+{
+	struct at_desc	*desc, *_desc;
+	struct at_desc	*child;
+
+	dev_vdbg(chan2dev(&atchan->chan_common), "cleanup descriptors\n");
+
+	list_for_each_entry_safe(desc, _desc, &atchan->active_list, desc_node) {
+		if (!(desc->lli.ctrla & ATC_DONE))
+			/* This one is currently in progress */
+			return;
+
+		list_for_each_entry(child, &desc->txd.tx_list, desc_node)
+			if (!(child->lli.ctrla & ATC_DONE))
+				/* Currently in progress */
+				return;
+
+		/*
+		 * No descriptors so far seem to be in progress, i.e.
+		 * this chain must be done.
+		 */
+		atc_chain_complete(atchan, desc);
+	}
+}
+
+/**
+ * atc_advance_work - at the end of a transaction, move forward
+ * @atchan: channel where the transaction ended
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_advance_work(struct at_dma_chan *atchan)
+{
+	dev_vdbg(chan2dev(&atchan->chan_common), "advance_work\n");
+
+	if (list_empty(&atchan->active_list) ||
+	    list_is_singular(&atchan->active_list)) {
+		atc_complete_all(atchan);
+	} else {
+		atc_chain_complete(atchan, atc_first_active(atchan));
+		/* advance work */
+		atc_dostart(atchan, atc_first_active(atchan));
+	}
+}
+
+
+/**
+ * atc_handle_error - handle errors reported by DMA controller
+ * @atchan: channel where error occurs
+ *
+ * Called with atchan->lock held and bh disabled
+ */
+static void atc_handle_error(struct at_dma_chan *atchan)
+{
+	struct at_desc *bad_desc;
+	struct at_desc *child;
+
+	/*
+	 * The descriptor currently at the head of the active list is
+	 * broked. Since we don't have any way to report errors, we'll
+	 * just have to scream loudly and try to carry on.
+	 */
+	bad_desc = atc_first_active(atchan);
+	list_del_init(&bad_desc->desc_node);
+
+	/* As we are stopped, take advantage to push queued descriptors
+	 * in active_list */
+	list_splice_init(&atchan->queue, atchan->active_list.prev);
+
+	/* Try to restart the controller */
+	if (!list_empty(&atchan->active_list))
+		atc_dostart(atchan, atc_first_active(atchan));
+
+	/*
+	 * KERN_CRITICAL may seem harsh, but since this only happens
+	 * when someone submits a bad physical address in a
+	 * descriptor, we should consider ourselves lucky that the
+	 * controller flagged an error instead of scribbling over
+	 * random memory locations.
+	 */
+	dev_crit(chan2dev(&atchan->chan_common),
+			"Bad descriptor submitted for DMA!\n");
+	dev_crit(chan2dev(&atchan->chan_common),
+			"  cookie: %d\n", bad_desc->txd.cookie);
+	atc_dump_lli(atchan, &bad_desc->lli);
+	list_for_each_entry(child, &bad_desc->txd.tx_list, desc_node)
+		atc_dump_lli(atchan, &child->lli);
+
+	/* Pretend the descriptor completed successfully */
+	atc_chain_complete(atchan, bad_desc);
+}
+
+
+/*--  IRQ & Tasklet  ---------------------------------------------------*/
+
+static void atc_tasklet(unsigned long data)
+{
+	struct at_dma_chan *atchan = (struct at_dma_chan *)data;
+
+	/* Channel cannot be enabled here */
+	if (atc_chan_is_enabled(atchan)) {
+		dev_err(chan2dev(&atchan->chan_common),
+			"BUG: channel enabled in tasklet\n");
+		return;
+	}
+
+	spin_lock(&atchan->lock);
+	if (test_and_clear_bit(0, &atchan->error_status))
+		atc_handle_error(atchan);
+	else
+		atc_advance_work(atchan);
+
+	spin_unlock(&atchan->lock);
+}
+
+static irqreturn_t at_dma_interrupt(int irq, void *dev_id)
+{
+	struct at_dma		*atdma = (struct at_dma *)dev_id;
+	struct at_dma_chan	*atchan;
+	int			i;
+	u32			status, pending, imr;
+	int			ret = IRQ_NONE;
+
+	do {
+		imr = dma_readl(atdma, EBCIMR);
+		status = dma_readl(atdma, EBCISR);
+		pending = status & imr;
+
+		if (!pending)
+			break;
+
+		dev_vdbg(atdma->dma_common.dev,
+			"interrupt: status = 0x%08x, 0x%08x, 0x%08x\n",
+			 status, imr, pending);
+
+		for (i = 0; i < atdma->dma_common.chancnt; i++) {
+			atchan = &atdma->chan[i];
+			if (pending & (AT_DMA_CBTC(i) | AT_DMA_ERR(i))) {
+				if (pending & AT_DMA_ERR(i)) {
+					/* Disable channel on AHB error */
+					dma_writel(atdma, CHDR, atchan->mask);
+					/* Give information to tasklet */
+					set_bit(0, &atchan->error_status);
+				}
+				tasklet_schedule(&atchan->tasklet);
+				ret = IRQ_HANDLED;
+			}
+		}
+
+	} while (pending);
+
+	return ret;
+}
+
+
+/*--  DMA Engine API  --------------------------------------------------*/
+
+/**
+ * atc_tx_submit - set the prepared descriptor(s) to be executed by the engine
+ * @desc: descriptor at the head of the transaction chain
+ *
+ * Queue chain if DMA engine is working already
+ *
+ * Cookie increment and adding to active_list or queue must be atomic
+ */
+static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx)
+{
+	struct at_desc		*desc = txd_to_at_desc(tx);
+	struct at_dma_chan	*atchan = to_at_dma_chan(tx->chan);
+	dma_cookie_t		cookie;
+
+	spin_lock_bh(&atchan->lock);
+	cookie = atc_assign_cookie(atchan, desc);
+
+	if (list_empty(&atchan->active_list)) {
+		dev_vdbg(chan2dev(tx->chan), "tx_submit: started %u\n",
+				desc->txd.cookie);
+		atc_dostart(atchan, desc);
+		list_add_tail(&desc->desc_node, &atchan->active_list);
+	} else {
+		dev_vdbg(chan2dev(tx->chan), "tx_submit: queued %u\n",
+				desc->txd.cookie);
+		list_add_tail(&desc->desc_node, &atchan->queue);
+	}
+
+	spin_unlock_bh(&atchan->lock);
+
+	return cookie;
+}
+
+/**
+ * atc_prep_dma_memcpy - prepare a memcpy operation
+ * @chan: the channel to prepare operation on
+ * @dest: operation virtual destination address
+ * @src: operation virtual source address
+ * @len: operation length
+ * @flags: tx descriptor status flags
+ */
+static struct dma_async_tx_descriptor *
+atc_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dest, dma_addr_t src,
+		size_t len, unsigned long flags)
+{
+	struct at_dma_chan	*atchan = to_at_dma_chan(chan);
+	struct at_desc		*desc = NULL;
+	struct at_desc		*first = NULL;
+	struct at_desc		*prev = NULL;
+	size_t			xfer_count;
+	size_t			offset;
+	unsigned int		src_width;
+	unsigned int		dst_width;
+	u32			ctrla;
+	u32			ctrlb;
+
+	dev_vdbg(chan2dev(chan), "prep_dma_memcpy: d0x%x s0x%x l0x%zx f0x%lx\n",
+			dest, src, len, flags);
+
+	if (unlikely(!len)) {
+		dev_dbg(chan2dev(chan), "prep_dma_memcpy: length is zero!\n");
+		return NULL;
+	}
+
+	ctrla =   ATC_DEFAULT_CTRLA;
+	ctrlb =   ATC_DEFAULT_CTRLB
+		| ATC_SRC_ADDR_MODE_INCR
+		| ATC_DST_ADDR_MODE_INCR
+		| ATC_FC_MEM2MEM;
+
+	/*
+	 * We can be a lot more clever here, but this should take care
+	 * of the most common optimization.
+	 */
+	if (!((src | dest  | len) & 3)) {
+		ctrla |= ATC_SRC_WIDTH_WORD | ATC_DST_WIDTH_WORD;
+		src_width = dst_width = 2;
+	} else if (!((src | dest | len) & 1)) {
+		ctrla |= ATC_SRC_WIDTH_HALFWORD | ATC_DST_WIDTH_HALFWORD;
+		src_width = dst_width = 1;
+	} else {
+		ctrla |= ATC_SRC_WIDTH_BYTE | ATC_DST_WIDTH_BYTE;
+		src_width = dst_width = 0;
+	}
+
+	for (offset = 0; offset < len; offset += xfer_count << src_width) {
+		xfer_count = min_t(size_t, (len - offset) >> src_width,
+				ATC_BTSIZE_MAX);
+
+		desc = atc_desc_get(atchan);
+		if (!desc)
+			goto err_desc_get;
+
+		desc->lli.saddr = src + offset;
+		desc->lli.daddr = dest + offset;
+		desc->lli.ctrla = ctrla | xfer_count;
+		desc->lli.ctrlb = ctrlb;
+
+		desc->txd.cookie = 0;
+		async_tx_ack(&desc->txd);
+
+		if (!first) {
+			first = desc;
+		} else {
+			/* inform the HW lli about chaining */
+			prev->lli.dscr = desc->txd.phys;
+			/* insert the link descriptor to the LD ring */
+			list_add_tail(&desc->desc_node,
+					&first->txd.tx_list);
+		}
+		prev = desc;
+	}
+
+	/* First descriptor of the chain embedds additional information */
+	first->txd.cookie = -EBUSY;
+	first->len = len;
+
+	/* set end-of-link to the last link descriptor of list*/
+	set_desc_eol(desc);
+
+	desc->txd.flags = flags; /* client is in control of this ack */
+
+	return &first->txd;
+
+err_desc_get:
+	atc_desc_put(atchan, first);
+	return NULL;
+}
+
+
+/**
+ * atc_prep_slave_sg - prepare descriptors for a DMA_SLAVE transaction
+ * @chan: DMA channel
+ * @sgl: scatterlist to transfer to/from
+ * @sg_len: number of entries in @scatterlist
+ * @direction: DMA direction
+ * @flags: tx descriptor status flags
+ */
+static struct dma_async_tx_descriptor *
+atc_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl,
+		unsigned int sg_len, enum dma_data_direction direction,
+		unsigned long flags)
+{
+	struct at_dma_chan	*atchan = to_at_dma_chan(chan);
+	struct at_dma_slave	*atslave = chan->private;
+	struct at_desc		*first = NULL;
+	struct at_desc		*prev = NULL;
+	u32			ctrla;
+	u32			ctrlb;
+	dma_addr_t		reg;
+	unsigned int		reg_width;
+	unsigned int		mem_width;
+	unsigned int		i;
+	struct scatterlist	*sg;
+	size_t			total_len = 0;
+
+	dev_vdbg(chan2dev(chan), "prep_slave_sg: %s f0x%lx\n",
+			direction == DMA_TO_DEVICE ? "TO DEVICE" : "FROM DEVICE",
+			flags);
+
+	if (unlikely(!atslave || !sg_len)) {
+		dev_dbg(chan2dev(chan), "prep_dma_memcpy: length is zero!\n");
+		return NULL;
+	}
+
+	reg_width = atslave->reg_width;
+
+	sg_len = dma_map_sg(chan2parent(chan), sgl, sg_len, direction);
+
+	ctrla = ATC_DEFAULT_CTRLA | atslave->ctrla;
+	ctrlb = ATC_DEFAULT_CTRLB | ATC_IEN;
+
+	switch (direction) {
+	case DMA_TO_DEVICE:
+		ctrla |=  ATC_DST_WIDTH(reg_width);
+		ctrlb |=  ATC_DST_ADDR_MODE_FIXED
+			| ATC_SRC_ADDR_MODE_INCR
+			| ATC_FC_MEM2PER;
+		reg = atslave->tx_reg;
+		for_each_sg(sgl, sg, sg_len, i) {
+			struct at_desc	*desc;
+			u32		len;
+			u32		mem;
+
+			desc = atc_desc_get(atchan);
+			if (!desc)
+				goto err_desc_get;
+
+			mem = sg_phys(sg);
+			len = sg_dma_len(sg);
+			mem_width = 2;
+			if (unlikely(mem & 3 || len & 3))
+				mem_width = 0;
+
+			desc->lli.saddr = mem;
+			desc->lli.daddr = reg;
+			desc->lli.ctrla = ctrla
+					| ATC_SRC_WIDTH(mem_width)
+					| len >> mem_width;
+			desc->lli.ctrlb = ctrlb;
+
+			if (!first) {
+				first = desc;
+			} else {
+				/* inform the HW lli about chaining */
+				prev->lli.dscr = desc->txd.phys;
+				/* insert the link descriptor to the LD ring */
+				list_add_tail(&desc->desc_node,
+						&first->txd.tx_list);
+			}
+			prev = desc;
+			total_len += len;
+		}
+		break;
+	case DMA_FROM_DEVICE:
+		ctrla |=  ATC_SRC_WIDTH(reg_width);
+		ctrlb |=  ATC_DST_ADDR_MODE_INCR
+			| ATC_SRC_ADDR_MODE_FIXED
+			| ATC_FC_PER2MEM;
+
+		reg = atslave->rx_reg;
+		for_each_sg(sgl, sg, sg_len, i) {
+			struct at_desc	*desc;
+			u32		len;
+			u32		mem;
+
+			desc = atc_desc_get(atchan);
+			if (!desc)
+				goto err_desc_get;
+
+			mem = sg_phys(sg);
+			len = sg_dma_len(sg);
+			mem_width = 2;
+			if (unlikely(mem & 3 || len & 3))
+				mem_width = 0;
+
+			desc->lli.saddr = reg;
+			desc->lli.daddr = mem;
+			desc->lli.ctrla = ctrla
+					| ATC_DST_WIDTH(mem_width)
+					| len >> mem_width;
+			desc->lli.ctrlb = ctrlb;
+
+			if (!first) {
+				first = desc;
+			} else {
+				/* inform the HW lli about chaining */
+				prev->lli.dscr = desc->txd.phys;
+				/* insert the link descriptor to the LD ring */
+				list_add_tail(&desc->desc_node,
+						&first->txd.tx_list);
+			}
+			prev = desc;
+			total_len += len;
+		}
+		break;
+	default:
+		return NULL;
+	}
+
+	/* set end-of-link to the last link descriptor of list*/
+	set_desc_eol(prev);
+
+	/* First descriptor of the chain embedds additional information */
+	first->txd.cookie = -EBUSY;
+	first->len = total_len;
+
+	/* last link descriptor of list is responsible of flags */
+	prev->txd.flags = flags; /* client is in control of this ack */
+
+	return &first->txd;
+
+err_desc_get:
+	dev_err(chan2dev(chan), "not enough descriptors available\n");
+	atc_desc_put(atchan, first);
+	return NULL;
+}
+
+static void atc_terminate_all(struct dma_chan *chan)
+{
+	struct at_dma_chan	*atchan = to_at_dma_chan(chan);
+	struct at_dma		*atdma = to_at_dma(chan->device);
+	struct at_desc		*desc, *_desc;
+	LIST_HEAD(list);
+
+	/*
+	 * This is only called when something went wrong elsewhere, so
+	 * we don't really care about the data. Just disable the
+	 * channel. We still have to poll the channel enable bit due
+	 * to AHB/HSB limitations.
+	 */
+	spin_lock_bh(&atchan->lock);
+
+	dma_writel(atdma, CHDR, atchan->mask);
+
+	/* confirm that this channel is disabled */
+	while (dma_readl(atdma, CHSR) & atchan->mask)
+		cpu_relax();
+
+	/* active_list entries will end up before queued entries */
+	list_splice_init(&atchan->queue, &list);
+	list_splice_init(&atchan->active_list, &list);
+
+	spin_unlock_bh(&atchan->lock);
+
+	/* Flush all pending and queued descriptors */
+	list_for_each_entry_safe(desc, _desc, &list, desc_node)
+		atc_chain_complete(atchan, desc);
+}
+
+/**
+ * atc_is_tx_complete - poll for transaction completion
+ * @chan: DMA channel
+ * @cookie: transaction identifier to check status of
+ * @done: if not %NULL, updated with last completed transaction
+ * @used: if not %NULL, updated with last used transaction
+ *
+ * If @done and @used are passed in, upon return they reflect the driver
+ * internal state and can be used with dma_async_is_complete() to check
+ * the status of multiple cookies without re-checking hardware state.
+ */
+static enum dma_status
+atc_is_tx_complete(struct dma_chan *chan,
+		dma_cookie_t cookie,
+		dma_cookie_t *done, dma_cookie_t *used)
+{
+	struct at_dma_chan	*atchan = to_at_dma_chan(chan);
+	dma_cookie_t		last_used;
+	dma_cookie_t		last_complete;
+	enum dma_status		ret;
+
+	dev_vdbg(chan2dev(chan), "is_tx_complete: %d (d%d, u%d)\n",
+			cookie, done ? *done : 0, used ? *used : 0);
+
+	spin_lock_bh(atchan->lock);
+
+	last_complete = atchan->completed_cookie;
+	last_used = chan->cookie;
+
+	ret = dma_async_is_complete(cookie, last_complete, last_used);
+	if (ret != DMA_SUCCESS) {
+		atc_cleanup_descriptors(atchan);
+
+		last_complete = atchan->completed_cookie;
+		last_used = chan->cookie;
+
+		ret = dma_async_is_complete(cookie, last_complete, last_used);
+	}
+
+	spin_unlock_bh(atchan->lock);
+
+	if (done)
+		*done = last_complete;
+	if (used)
+		*used = last_used;
+
+	return ret;
+}
+
+/**
+ * atc_issue_pending - try to finish work
+ * @chan: target DMA channel
+ */
+static void atc_issue_pending(struct dma_chan *chan)
+{
+	struct at_dma_chan	*atchan = to_at_dma_chan(chan);
+
+	dev_vdbg(chan2dev(chan), "issue_pending\n");
+
+	if (!atc_chan_is_enabled(atchan)) {
+		spin_lock_bh(&atchan->lock);
+		atc_advance_work(atchan);
+		spin_unlock_bh(&atchan->lock);
+	}
+}
+
+/**
+ * atc_alloc_chan_resources - allocate resources for DMA channel
+ * @chan: allocate descriptor resources for this channel
+ * @client: current client requesting the channel be ready for requests
+ *
+ * return - the number of allocated descriptors
+ */
+static int atc_alloc_chan_resources(struct dma_chan *chan)
+{
+	struct at_dma_chan	*atchan = to_at_dma_chan(chan);
+	struct at_dma		*atdma = to_at_dma(chan->device);
+	struct at_desc		*desc;
+	struct at_dma_slave	*atslave;
+	int			i;
+	u32			cfg;
+	LIST_HEAD(tmp_list);
+
+	dev_vdbg(chan2dev(chan), "alloc_chan_resources\n");
+
+	/* ASSERT:  channel is idle */
+	if (atc_chan_is_enabled(atchan)) {
+		dev_dbg(chan2dev(chan), "DMA channel not idle ?\n");
+		return -EIO;
+	}
+
+	cfg = ATC_DEFAULT_CFG;
+
+	atslave = chan->private;
+	if (atslave) {
+		/*
+		 * We need controller-specific data to set up slave
+		 * transfers.
+		 */
+		BUG_ON(!atslave->dma_dev || atslave->dma_dev != atdma->dma_common.dev);
+
+		/* if cfg configuration specified take it instad of default */
+		if (atslave->cfg)
+			cfg = atslave->cfg;
+	}
+
+	/* have we already been set up?
+	 * reconfigure channel but no need to reallocate descriptors */
+	if (!list_empty(&atchan->free_list))
+		return atchan->descs_allocated;
+
+	/* Allocate initial pool of descriptors */
+	for (i = 0; i < init_nr_desc_per_channel; i++) {
+		desc = atc_alloc_descriptor(chan, GFP_KERNEL);
+		if (!desc) {
+			dev_err(atdma->dma_common.dev,
+				"Only %d initial descriptors\n", i);
+			break;
+		}
+		list_add_tail(&desc->desc_node, &tmp_list);
+	}
+
+	spin_lock_bh(&atchan->lock);
+	atchan->descs_allocated = i;
+	list_splice(&tmp_list, &atchan->free_list);
+	atchan->completed_cookie = chan->cookie = 1;
+	spin_unlock_bh(&atchan->lock);
+
+	/* channel parameters */
+	channel_writel(atchan, CFG, cfg);
+
+	dev_dbg(chan2dev(chan),
+		"alloc_chan_resources: allocated %d descriptors\n",
+		atchan->descs_allocated);
+
+	return atchan->descs_allocated;
+}
+
+/**
+ * atc_free_chan_resources - free all channel resources
+ * @chan: DMA channel
+ */
+static void atc_free_chan_resources(struct dma_chan *chan)
+{
+	struct at_dma_chan	*atchan = to_at_dma_chan(chan);
+	struct at_dma		*atdma = to_at_dma(chan->device);
+	struct at_desc		*desc, *_desc;
+	LIST_HEAD(list);
+
+	dev_dbg(chan2dev(chan), "free_chan_resources: (descs allocated=%u)\n",
+		atchan->descs_allocated);
+
+	/* ASSERT:  channel is idle */
+	BUG_ON(!list_empty(&atchan->active_list));
+	BUG_ON(!list_empty(&atchan->queue));
+	BUG_ON(atc_chan_is_enabled(atchan));
+
+	list_for_each_entry_safe(desc, _desc, &atchan->free_list, desc_node) {
+		dev_vdbg(chan2dev(chan), "  freeing descriptor %p\n", desc);
+		list_del(&desc->desc_node);
+		/* free link descriptor */
+		dma_pool_free(atdma->dma_desc_pool, desc, desc->txd.phys);
+	}
+	list_splice_init(&atchan->free_list, &list);
+	atchan->descs_allocated = 0;
+
+	dev_vdbg(chan2dev(chan), "free_chan_resources: done\n");
+}
+
+
+/*--  Module Management  -----------------------------------------------*/
+
+/**
+ * at_dma_off - disable DMA controller
+ * @atdma: the Atmel HDAMC device
+ */
+static void at_dma_off(struct at_dma *atdma)
+{
+	dma_writel(atdma, EN, 0);
+
+	/* disable all interrupts */
+	dma_writel(atdma, EBCIDR, -1L);
+
+	/* confirm that all channels are disabled */
+	while (dma_readl(atdma, CHSR) & atdma->all_chan_mask)
+		cpu_relax();
+}
+
+static int __init at_dma_probe(struct platform_device *pdev)
+{
+	struct at_dma_platform_data *pdata;
+	struct resource		*io;
+	struct at_dma		*atdma;
+	size_t			size;
+	int			irq;
+	int			err;
+	int			i;
+
+	/* get DMA Controller parameters from platform */
+	pdata = pdev->dev.platform_data;
+	if (!pdata || pdata->nr_channels > AT_DMA_MAX_NR_CHANNELS)
+		return -EINVAL;
+
+	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!io)
+		return -EINVAL;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	size = sizeof(struct at_dma);
+	size += pdata->nr_channels * sizeof(struct at_dma_chan);
+	atdma = kzalloc(size, GFP_KERNEL);
+	if (!atdma)
+		return -ENOMEM;
+
+	/* discover transaction capabilites from the platform data */
+	atdma->dma_common.cap_mask = pdata->cap_mask;
+	atdma->all_chan_mask = (1 << pdata->nr_channels) - 1;
+
+	size = io->end - io->start + 1;
+	if (!request_mem_region(io->start, size, pdev->dev.driver->name)) {
+		err = -EBUSY;
+		goto err_kfree;
+	}
+
+	atdma->regs = ioremap(io->start, size);
+	if (!atdma->regs) {
+		err = -ENOMEM;
+		goto err_release_r;
+	}
+
+	atdma->clk = clk_get(&pdev->dev, "dma_clk");
+	if (IS_ERR(atdma->clk)) {
+		err = PTR_ERR(atdma->clk);
+		goto err_clk;
+	}
+	clk_enable(atdma->clk);
+
+	/* force dma off, just in case */
+	at_dma_off(atdma);
+
+	err = request_irq(irq, at_dma_interrupt, 0, "at_hdmac", atdma);
+	if (err)
+		goto err_irq;
+
+	platform_set_drvdata(pdev, atdma);
+
+	/* create a pool of consistent memory blocks for hardware descriptors */
+	atdma->dma_desc_pool = dma_pool_create("at_hdmac_desc_pool",
+			&pdev->dev, sizeof(struct at_desc),
+			4 /* word alignment */, 0);
+	if (!atdma->dma_desc_pool) {
+		dev_err(&pdev->dev, "No memory for descriptors dma pool\n");
+		err = -ENOMEM;
+		goto err_pool_create;
+	}
+
+	/* clear any pending interrupt */
+	while (dma_readl(atdma, EBCISR))
+		cpu_relax();
+
+	/* initialize channels related values */
+	INIT_LIST_HEAD(&atdma->dma_common.channels);
+	for (i = 0; i < pdata->nr_channels; i++, atdma->dma_common.chancnt++) {
+		struct at_dma_chan	*atchan = &atdma->chan[i];
+
+		atchan->chan_common.device = &atdma->dma_common;
+		atchan->chan_common.cookie = atchan->completed_cookie = 1;
+		atchan->chan_common.chan_id = i;
+		list_add_tail(&atchan->chan_common.device_node,
+				&atdma->dma_common.channels);
+
+		atchan->ch_regs = atdma->regs + ch_regs(i);
+		spin_lock_init(&atchan->lock);
+		atchan->mask = 1 << i;
+
+		INIT_LIST_HEAD(&atchan->active_list);
+		INIT_LIST_HEAD(&atchan->queue);
+		INIT_LIST_HEAD(&atchan->free_list);
+
+		tasklet_init(&atchan->tasklet, atc_tasklet,
+				(unsigned long)atchan);
+		atc_enable_irq(atchan);
+	}
+
+	/* set base routines */
+	atdma->dma_common.device_alloc_chan_resources = atc_alloc_chan_resources;
+	atdma->dma_common.device_free_chan_resources = atc_free_chan_resources;
+	atdma->dma_common.device_is_tx_complete = atc_is_tx_complete;
+	atdma->dma_common.device_issue_pending = atc_issue_pending;
+	atdma->dma_common.dev = &pdev->dev;
+
+	/* set prep routines based on capability */
+	if (dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask))
+		atdma->dma_common.device_prep_dma_memcpy = atc_prep_dma_memcpy;
+
+	if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask)) {
+		atdma->dma_common.device_prep_slave_sg = atc_prep_slave_sg;
+		atdma->dma_common.device_terminate_all = atc_terminate_all;
+	}
+
+	dma_writel(atdma, EN, AT_DMA_ENABLE);
+
+	dev_info(&pdev->dev, "Atmel AHB DMA Controller ( %s%s), %d channels\n",
+	  dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask) ? "cpy " : "",
+	  dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask)  ? "slave " : "",
+	  atdma->dma_common.chancnt);
+
+	dma_async_device_register(&atdma->dma_common);
+
+	return 0;
+
+err_pool_create:
+	platform_set_drvdata(pdev, NULL);
+	free_irq(platform_get_irq(pdev, 0), atdma);
+err_irq:
+	clk_disable(atdma->clk);
+	clk_put(atdma->clk);
+err_clk:
+	iounmap(atdma->regs);
+	atdma->regs = NULL;
+err_release_r:
+	release_mem_region(io->start, size);
+err_kfree:
+	kfree(atdma);
+	return err;
+}
+
+static int __exit at_dma_remove(struct platform_device *pdev)
+{
+	struct at_dma		*atdma = platform_get_drvdata(pdev);
+	struct dma_chan		*chan, *_chan;
+	struct resource		*io;
+
+	at_dma_off(atdma);
+	dma_async_device_unregister(&atdma->dma_common);
+
+	dma_pool_destroy(atdma->dma_desc_pool);
+	platform_set_drvdata(pdev, NULL);
+	free_irq(platform_get_irq(pdev, 0), atdma);
+
+	list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels,
+			device_node) {
+		struct at_dma_chan	*atchan = to_at_dma_chan(chan);
+
+		/* Disable interrupts */
+		atc_disable_irq(atchan);
+		tasklet_disable(&atchan->tasklet);
+
+		tasklet_kill(&atchan->tasklet);
+		list_del(&chan->device_node);
+	}
+
+	clk_disable(atdma->clk);
+	clk_put(atdma->clk);
+
+	iounmap(atdma->regs);
+	atdma->regs = NULL;
+
+	io = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	release_mem_region(io->start, io->end - io->start + 1);
+
+	kfree(atdma);
+
+	return 0;
+}
+
+static void at_dma_shutdown(struct platform_device *pdev)
+{
+	struct at_dma	*atdma = platform_get_drvdata(pdev);
+
+	at_dma_off(platform_get_drvdata(pdev));
+	clk_disable(atdma->clk);
+}
+
+static int at_dma_suspend_late(struct platform_device *pdev, pm_message_t mesg)
+{
+	struct at_dma	*atdma = platform_get_drvdata(pdev);
+
+	at_dma_off(platform_get_drvdata(pdev));
+	clk_disable(atdma->clk);
+	return 0;
+}
+
+static int at_dma_resume_early(struct platform_device *pdev)
+{
+	struct at_dma	*atdma = platform_get_drvdata(pdev);
+
+	clk_enable(atdma->clk);
+	dma_writel(atdma, EN, AT_DMA_ENABLE);
+	return 0;
+
+}
+
+static struct platform_driver at_dma_driver = {
+	.remove		= __exit_p(at_dma_remove),
+	.shutdown	= at_dma_shutdown,
+	.suspend_late	= at_dma_suspend_late,
+	.resume_early	= at_dma_resume_early,
+	.driver = {
+		.name	= "at_hdmac",
+	},
+};
+
+static int __init at_dma_init(void)
+{
+	return platform_driver_probe(&at_dma_driver, at_dma_probe);
+}
+module_init(at_dma_init);
+
+static void __exit at_dma_exit(void)
+{
+	platform_driver_unregister(&at_dma_driver);
+}
+module_exit(at_dma_exit);
+
+MODULE_DESCRIPTION("Atmel AHB DMA Controller driver");
+MODULE_AUTHOR("Nicolas Ferre <nicolas.ferre@atmel.com>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:at_hdmac");
diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h
new file mode 100644
index 0000000..4c972af
--- /dev/null
+++ b/drivers/dma/at_hdmac_regs.h
@@ -0,0 +1,353 @@
+/*
+ * Header file for the Atmel AHB DMA Controller driver
+ *
+ * Copyright (C) 2008 Atmel Corporation
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ */
+#ifndef AT_HDMAC_REGS_H
+#define	AT_HDMAC_REGS_H
+
+#include <mach/at_hdmac.h>
+
+#define	AT_DMA_MAX_NR_CHANNELS	8
+
+
+#define	AT_DMA_GCFG	0x00	/* Global Configuration Register */
+#define		AT_DMA_IF_BIGEND(i)	(0x1 << (i))	/* AHB-Lite Interface i in Big-endian mode */
+#define		AT_DMA_ARB_CFG	(0x1 << 4)	/* Arbiter mode. */
+#define			AT_DMA_ARB_CFG_FIXED		(0x0 << 4)
+#define			AT_DMA_ARB_CFG_ROUND_ROBIN	(0x1 << 4)
+
+#define	AT_DMA_EN	0x04	/* Controller Enable Register */
+#define		AT_DMA_ENABLE	(0x1 << 0)
+
+#define	AT_DMA_SREQ	0x08	/* Software Single Request Register */
+#define		AT_DMA_SSREQ(x)	(0x1 << ((x) << 1))		/* Request a source single transfer on channel x */
+#define		AT_DMA_DSREQ(x)	(0x1 << (1 + ((x) << 1)))	/* Request a destination single transfer on channel x */
+
+#define	AT_DMA_CREQ	0x0C	/* Software Chunk Transfer Request Register */
+#define		AT_DMA_SCREQ(x)	(0x1 << ((x) << 1))		/* Request a source chunk transfer on channel x */
+#define		AT_DMA_DCREQ(x)	(0x1 << (1 + ((x) << 1)))	/* Request a destination chunk transfer on channel x */
+
+#define	AT_DMA_LAST	0x10	/* Software Last Transfer Flag Register */
+#define		AT_DMA_SLAST(x)	(0x1 << ((x) << 1))		/* This src rq is last tx of buffer on channel x */
+#define		AT_DMA_DLAST(x)	(0x1 << (1 + ((x) << 1)))	/* This dst rq is last tx of buffer on channel x */
+
+#define	AT_DMA_SYNC	0x14	/* Request Synchronization Register */
+#define		AT_DMA_SYR(h)	(0x1 << (h))			/* Synchronize handshake line h */
+
+/* Error, Chained Buffer transfer completed and Buffer transfer completed Interrupt registers */
+#define	AT_DMA_EBCIER	0x18	/* Enable register */
+#define	AT_DMA_EBCIDR	0x1C	/* Disable register */
+#define	AT_DMA_EBCIMR	0x20	/* Mask Register */
+#define	AT_DMA_EBCISR	0x24	/* Status Register */
+#define		AT_DMA_CBTC_OFFSET	8
+#define		AT_DMA_ERR_OFFSET	16
+#define		AT_DMA_BTC(x)	(0x1 << (x))
+#define		AT_DMA_CBTC(x)	(0x1 << (AT_DMA_CBTC_OFFSET + (x)))
+#define		AT_DMA_ERR(x)	(0x1 << (AT_DMA_ERR_OFFSET + (x)))
+
+#define	AT_DMA_CHER	0x28	/* Channel Handler Enable Register */
+#define		AT_DMA_ENA(x)	(0x1 << (x))
+#define		AT_DMA_SUSP(x)	(0x1 << ( 8 + (x)))
+#define		AT_DMA_KEEP(x)	(0x1 << (24 + (x)))
+
+#define	AT_DMA_CHDR	0x2C	/* Channel Handler Disable Register */
+#define		AT_DMA_DIS(x)	(0x1 << (x))
+#define		AT_DMA_RES(x)	(0x1 << ( 8 + (x)))
+
+#define	AT_DMA_CHSR	0x30	/* Channel Handler Status Register */
+#define		AT_DMA_EMPT(x)	(0x1 << (16 + (x)))
+#define		AT_DMA_STAL(x)	(0x1 << (24 + (x)))
+
+
+#define	AT_DMA_CH_REGS_BASE	0x3C	/* Channel registers base address */
+#define	ch_regs(x)	(AT_DMA_CH_REGS_BASE + (x) * 0x28) /* Channel x base addr */
+
+/* Hardware register offset for each channel */
+#define	ATC_SADDR_OFFSET	0x00	/* Source Address Register */
+#define	ATC_DADDR_OFFSET	0x04	/* Destination Address Register */
+#define	ATC_DSCR_OFFSET		0x08	/* Descriptor Address Register */
+#define	ATC_CTRLA_OFFSET	0x0C	/* Control A Register */
+#define	ATC_CTRLB_OFFSET	0x10	/* Control B Register */
+#define	ATC_CFG_OFFSET		0x14	/* Configuration Register */
+#define	ATC_SPIP_OFFSET		0x18	/* Src PIP Configuration Register */
+#define	ATC_DPIP_OFFSET		0x1C	/* Dst PIP Configuration Register */
+
+
+/* Bitfield definitions */
+
+/* Bitfields in DSCR */
+#define	ATC_DSCR_IF(i)		(0x3 & (i))	/* Dsc feched via AHB-Lite Interface i */
+
+/* Bitfields in CTRLA */
+#define	ATC_BTSIZE_MAX		0xFFFFUL	/* Maximum Buffer Transfer Size */
+#define	ATC_BTSIZE(x)		(ATC_BTSIZE_MAX & (x)) /* Buffer Transfer Size */
+/* Chunck Tranfer size definitions are in at_hdmac.h */
+#define	ATC_SRC_WIDTH_MASK	(0x3 << 24)	/* Source Single Transfer Size */
+#define		ATC_SRC_WIDTH(x)	((x) << 24)
+#define		ATC_SRC_WIDTH_BYTE	(0x0 << 24)
+#define		ATC_SRC_WIDTH_HALFWORD	(0x1 << 24)
+#define		ATC_SRC_WIDTH_WORD	(0x2 << 24)
+#define	ATC_DST_WIDTH_MASK	(0x3 << 28)	/* Destination Single Transfer Size */
+#define		ATC_DST_WIDTH(x)	((x) << 28)
+#define		ATC_DST_WIDTH_BYTE	(0x0 << 28)
+#define		ATC_DST_WIDTH_HALFWORD	(0x1 << 28)
+#define		ATC_DST_WIDTH_WORD	(0x2 << 28)
+#define	ATC_DONE		(0x1 << 31)	/* Tx Done (only written back in descriptor) */
+
+/* Bitfields in CTRLB */
+#define	ATC_SIF(i)		(0x3 & (i))	/* Src tx done via AHB-Lite Interface i */
+#define	ATC_DIF(i)		((0x3 & (i)) <<  4)	/* Dst tx done via AHB-Lite Interface i */
+#define	ATC_SRC_PIP		(0x1 <<  8)	/* Source Picture-in-Picture enabled */
+#define	ATC_DST_PIP		(0x1 << 12)	/* Destination Picture-in-Picture enabled */
+#define	ATC_SRC_DSCR_DIS	(0x1 << 16)	/* Src Descriptor fetch disable */
+#define	ATC_DST_DSCR_DIS	(0x1 << 20)	/* Dst Descriptor fetch disable */
+#define	ATC_FC_MASK		(0x7 << 21)	/* Choose Flow Controller */
+#define		ATC_FC_MEM2MEM		(0x0 << 21)	/* Mem-to-Mem (DMA) */
+#define		ATC_FC_MEM2PER		(0x1 << 21)	/* Mem-to-Periph (DMA) */
+#define		ATC_FC_PER2MEM		(0x2 << 21)	/* Periph-to-Mem (DMA) */
+#define		ATC_FC_PER2PER		(0x3 << 21)	/* Periph-to-Periph (DMA) */
+#define		ATC_FC_PER2MEM_PER	(0x4 << 21)	/* Periph-to-Mem (Peripheral) */
+#define		ATC_FC_MEM2PER_PER	(0x5 << 21)	/* Mem-to-Periph (Peripheral) */
+#define		ATC_FC_PER2PER_SRCPER	(0x6 << 21)	/* Periph-to-Periph (Src Peripheral) */
+#define		ATC_FC_PER2PER_DSTPER	(0x7 << 21)	/* Periph-to-Periph (Dst Peripheral) */
+#define	ATC_SRC_ADDR_MODE_MASK	(0x3 << 24)
+#define		ATC_SRC_ADDR_MODE_INCR	(0x0 << 24)	/* Incrementing Mode */
+#define		ATC_SRC_ADDR_MODE_DECR	(0x1 << 24)	/* Decrementing Mode */
+#define		ATC_SRC_ADDR_MODE_FIXED	(0x2 << 24)	/* Fixed Mode */
+#define	ATC_DST_ADDR_MODE_MASK	(0x3 << 28)
+#define		ATC_DST_ADDR_MODE_INCR	(0x0 << 28)	/* Incrementing Mode */
+#define		ATC_DST_ADDR_MODE_DECR	(0x1 << 28)	/* Decrementing Mode */
+#define		ATC_DST_ADDR_MODE_FIXED	(0x2 << 28)	/* Fixed Mode */
+#define	ATC_IEN			(0x1 << 30)	/* BTC interrupt enable (active low) */
+#define	ATC_AUTO		(0x1 << 31)	/* Auto multiple buffer tx enable */
+
+/* Bitfields in CFG */
+/* are in at_hdmac.h */
+
+/* Bitfields in SPIP */
+#define	ATC_SPIP_HOLE(x)	(0xFFFFU & (x))
+#define	ATC_SPIP_BOUNDARY(x)	((0x3FF & (x)) << 16)
+
+/* Bitfields in DPIP */
+#define	ATC_DPIP_HOLE(x)	(0xFFFFU & (x))
+#define	ATC_DPIP_BOUNDARY(x)	((0x3FF & (x)) << 16)
+
+
+/*--  descriptors  -----------------------------------------------------*/
+
+/* LLI == Linked List Item; aka DMA buffer descriptor */
+struct at_lli {
+	/* values that are not changed by hardware */
+	dma_addr_t	saddr;
+	dma_addr_t	daddr;
+	/* value that may get written back: */
+	u32		ctrla;
+	/* more values that are not changed by hardware */
+	u32		ctrlb;
+	dma_addr_t	dscr;	/* chain to next lli */
+};
+
+/**
+ * struct at_desc - software descriptor
+ * @at_lli: hardware lli structure
+ * @txd: support for the async_tx api
+ * @desc_node: node on the channed descriptors list
+ * @len: total transaction bytecount
+ */
+struct at_desc {
+	/* FIRST values the hardware uses */
+	struct at_lli			lli;
+
+	/* THEN values for driver housekeeping */
+	struct dma_async_tx_descriptor	txd;
+	struct list_head		desc_node;
+	size_t				len;
+};
+
+static inline struct at_desc *
+txd_to_at_desc(struct dma_async_tx_descriptor *txd)
+{
+	return container_of(txd, struct at_desc, txd);
+}
+
+
+/*--  Channels  --------------------------------------------------------*/
+
+/**
+ * struct at_dma_chan - internal representation of an Atmel HDMAC channel
+ * @chan_common: common dmaengine channel object members
+ * @device: parent device
+ * @ch_regs: memory mapped register base
+ * @mask: channel index in a mask
+ * @error_status: transmit error status information from irq handler
+ *                to tasklet (use atomic operations)
+ * @tasklet: bottom half to finish transaction work
+ * @lock: serializes enqueue/dequeue operations to descriptors lists
+ * @completed_cookie: identifier for the most recently completed operation
+ * @active_list: list of descriptors dmaengine is being running on
+ * @queue: list of descriptors ready to be submitted to engine
+ * @free_list: list of descriptors usable by the channel
+ * @descs_allocated: records the actual size of the descriptor pool
+ */
+struct at_dma_chan {
+	struct dma_chan		chan_common;
+	struct at_dma		*device;
+	void __iomem		*ch_regs;
+	u8			mask;
+	unsigned long		error_status;
+	struct tasklet_struct	tasklet;
+
+	spinlock_t		lock;
+
+	/* these other elements are all protected by lock */
+	dma_cookie_t		completed_cookie;
+	struct list_head	active_list;
+	struct list_head	queue;
+	struct list_head	free_list;
+	unsigned int		descs_allocated;
+};
+
+#define	channel_readl(atchan, name) \
+	__raw_readl((atchan)->ch_regs + ATC_##name##_OFFSET)
+
+#define	channel_writel(atchan, name, val) \
+	__raw_writel((val), (atchan)->ch_regs + ATC_##name##_OFFSET)
+
+static inline struct at_dma_chan *to_at_dma_chan(struct dma_chan *dchan)
+{
+	return container_of(dchan, struct at_dma_chan, chan_common);
+}
+
+
+/*--  Controller  ------------------------------------------------------*/
+
+/**
+ * struct at_dma - internal representation of an Atmel HDMA Controller
+ * @chan_common: common dmaengine dma_device object members
+ * @ch_regs: memory mapped register base
+ * @clk: dma controller clock
+ * @all_chan_mask: all channels availlable in a mask
+ * @dma_desc_pool: base of DMA descriptor region (DMA address)
+ * @chan: channels table to store at_dma_chan structures
+ */
+struct at_dma {
+	struct dma_device	dma_common;
+	void __iomem		*regs;
+	struct clk		*clk;
+
+	u8			all_chan_mask;
+
+	struct dma_pool		*dma_desc_pool;
+	/* AT THE END channels table */
+	struct at_dma_chan	chan[0];
+};
+
+#define	dma_readl(atdma, name) \
+	__raw_readl((atdma)->regs + AT_DMA_##name)
+#define	dma_writel(atdma, name, val) \
+	__raw_writel((val), (atdma)->regs + AT_DMA_##name)
+
+static inline struct at_dma *to_at_dma(struct dma_device *ddev)
+{
+	return container_of(ddev, struct at_dma, dma_common);
+}
+
+
+/*--  Helper functions  ------------------------------------------------*/
+
+static struct device *chan2dev(struct dma_chan *chan)
+{
+	return &chan->dev->device;
+}
+static struct device *chan2parent(struct dma_chan *chan)
+{
+	return chan->dev->device.parent;
+}
+
+#if defined(VERBOSE_DEBUG)
+static void vdbg_dump_regs(struct at_dma_chan *atchan)
+{
+	struct at_dma	*atdma = to_at_dma(atchan->chan_common.device);
+
+	dev_err(chan2dev(&atchan->chan_common),
+		"  channel %d : imr = 0x%x, chsr = 0x%x\n",
+		atchan->chan_common.chan_id,
+		dma_readl(atdma, EBCIMR),
+		dma_readl(atdma, CHSR));
+
+	dev_err(chan2dev(&atchan->chan_common),
+		"  channel: s0x%x d0x%x ctrl0x%x:0x%x cfg0x%x l0x%x\n",
+		channel_readl(atchan, SADDR),
+		channel_readl(atchan, DADDR),
+		channel_readl(atchan, CTRLA),
+		channel_readl(atchan, CTRLB),
+		channel_readl(atchan, CFG),
+		channel_readl(atchan, DSCR));
+}
+#else
+static void vdbg_dump_regs(struct at_dma_chan *atchan) {}
+#endif
+
+static void atc_dump_lli(struct at_dma_chan *atchan, struct at_lli *lli)
+{
+	dev_printk(KERN_CRIT, chan2dev(&atchan->chan_common),
+			"  desc: s0x%x d0x%x ctrl0x%x:0x%x l0x%x\n",
+			lli->saddr, lli->daddr,
+			lli->ctrla, lli->ctrlb, lli->dscr);
+}
+
+
+static void atc_setup_irq(struct at_dma_chan *atchan, int on)
+{
+	struct at_dma	*atdma = to_at_dma(atchan->chan_common.device);
+	u32		ebci;
+
+	/* enable interrupts on buffer chain completion & error */
+	ebci =    AT_DMA_CBTC(atchan->chan_common.chan_id)
+		| AT_DMA_ERR(atchan->chan_common.chan_id);
+	if (on)
+		dma_writel(atdma, EBCIER, ebci);
+	else
+		dma_writel(atdma, EBCIDR, ebci);
+}
+
+static inline void atc_enable_irq(struct at_dma_chan *atchan)
+{
+	atc_setup_irq(atchan, 1);
+}
+
+static inline void atc_disable_irq(struct at_dma_chan *atchan)
+{
+	atc_setup_irq(atchan, 0);
+}
+
+
+/**
+ * atc_chan_is_enabled - test if given channel is enabled
+ * @atchan: channel we want to test status
+ */
+static inline int atc_chan_is_enabled(struct at_dma_chan *atchan)
+{
+	struct at_dma	*atdma = to_at_dma(atchan->chan_common.device);
+
+	return !!(dma_readl(atdma, CHSR) & atchan->mask);
+}
+
+
+/**
+ * set_desc_eol - set end-of-link to descriptor so it will end transfer
+ * @desc: descriptor, signle or at the end of a chain, to end chain on
+ */
+static void set_desc_eol(struct at_desc *desc)
+{
+	desc->lli.ctrlb |= ATC_SRC_DSCR_DIS | ATC_DST_DSCR_DIS;
+	desc->lli.dscr = 0;
+}
+
+#endif /* AT_HDMAC_REGS_H */
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index fb7da51..d93017f 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -38,6 +38,11 @@ module_param(max_channels, uint, S_IRUGO);
 MODULE_PARM_DESC(max_channels,
 		"Maximum number of channels to use (default: all)");
 
+static unsigned int iterations;
+module_param(iterations, uint, S_IRUGO);
+MODULE_PARM_DESC(iterations,
+		"Iterations before stopping test (default: infinite)");
+
 static unsigned int xor_sources = 3;
 module_param(xor_sources, uint, S_IRUGO);
 MODULE_PARM_DESC(xor_sources,
@@ -114,7 +119,7 @@ static void dmatest_init_srcs(u8 **bufs, unsigned int start, unsigned int len)
 			buf[i] = PATTERN_SRC | (~i & PATTERN_COUNT_MASK);
 		for ( ; i < start + len; i++)
 			buf[i] = PATTERN_SRC | PATTERN_COPY
-				| (~i & PATTERN_COUNT_MASK);;
+				| (~i & PATTERN_COUNT_MASK);
 		for ( ; i < test_buf_size; i++)
 			buf[i] = PATTERN_SRC | (~i & PATTERN_COUNT_MASK);
 		buf++;
@@ -270,7 +275,8 @@ static int dmatest_func(void *data)
 
 	flags = DMA_CTRL_ACK | DMA_COMPL_SKIP_DEST_UNMAP | DMA_PREP_INTERRUPT;
 
-	while (!kthread_should_stop()) {
+	while (!kthread_should_stop()
+	       && !(iterations && total_tests >= iterations)) {
 		struct dma_device *dev = chan->device;
 		struct dma_async_tx_descriptor *tx = NULL;
 		dma_addr_t dma_srcs[src_cnt];
@@ -416,6 +422,13 @@ err_srcbuf:
 err_srcs:
 	pr_notice("%s: terminating after %u tests, %u failures (status %d)\n",
 			thread_name, total_tests, failed_tests, ret);
+
+	if (iterations > 0)
+		while (!kthread_should_stop()) {
+			DECLARE_WAIT_QUEUE_HEAD(wait_dmatest_exit);
+			interruptible_sleep_on(&wait_dmatest_exit);
+		}
+
 	return ret;
 }
 
@@ -495,11 +508,11 @@ static int dmatest_add_channel(struct dma_chan *chan)
 
 	if (dma_has_cap(DMA_MEMCPY, dma_dev->cap_mask)) {
 		cnt = dmatest_add_threads(dtc, DMA_MEMCPY);
-		thread_count += cnt > 0 ?: 0;
+		thread_count += cnt > 0 ? cnt : 0;
 	}
 	if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) {
 		cnt = dmatest_add_threads(dtc, DMA_XOR);
-		thread_count += cnt > 0 ?: 0;
+		thread_count += cnt > 0 ? cnt : 0;
 	}
 
 	pr_info("dmatest: Started %u threads using %s\n",
diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c
index f18d1bd..ef87a89 100644
--- a/drivers/dma/fsldma.c
+++ b/drivers/dma/fsldma.c
@@ -12,6 +12,11 @@
  *   also fit for MPC8560, MPC8555, MPC8548, MPC8641, and etc.
  *   The support for MPC8349 DMA contorller is also added.
  *
+ * This driver instructs the DMA controller to issue the PCI Read Multiple
+ * command for PCI read operations, instead of using the default PCI Read Line
+ * command. Please be aware that this setting may result in read pre-fetching
+ * on some platforms.
+ *
  * This is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation; either version 2 of the License, or
@@ -49,9 +54,10 @@ static void dma_init(struct fsl_dma_chan *fsl_chan)
 	case FSL_DMA_IP_83XX:
 		/* Set the channel to below modes:
 		 * EOTIE - End-of-transfer interrupt enable
+		 * PRC_RM - PCI read multiple
 		 */
-		DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE,
-				32);
+		DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr, FSL_DMA_MR_EOTIE
+				| FSL_DMA_MR_PRC_RM, 32);
 		break;
 	}
 
@@ -136,15 +142,16 @@ static int dma_is_idle(struct fsl_dma_chan *fsl_chan)
 
 static void dma_start(struct fsl_dma_chan *fsl_chan)
 {
-	u32 mr_set = 0;;
+	u32 mr_set = 0;
 
 	if (fsl_chan->feature & FSL_DMA_CHAN_PAUSE_EXT) {
 		DMA_OUT(fsl_chan, &fsl_chan->reg_base->bcr, 0, 32);
 		mr_set |= FSL_DMA_MR_EMP_EN;
-	} else
+	} else if ((fsl_chan->feature & FSL_DMA_IP_MASK) == FSL_DMA_IP_85XX) {
 		DMA_OUT(fsl_chan, &fsl_chan->reg_base->mr,
 			DMA_IN(fsl_chan, &fsl_chan->reg_base->mr, 32)
 				& ~FSL_DMA_MR_EMP_EN, 32);
+	}
 
 	if (fsl_chan->feature & FSL_DMA_CHAN_START_EXT)
 		mr_set |= FSL_DMA_MR_EMS_EN;
@@ -871,9 +878,9 @@ static int __devinit fsl_dma_chan_probe(struct fsl_dma_device *fdev,
 
 	switch (new_fsl_chan->feature & FSL_DMA_IP_MASK) {
 	case FSL_DMA_IP_85XX:
-		new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start;
 		new_fsl_chan->toggle_ext_pause = fsl_chan_toggle_ext_pause;
 	case FSL_DMA_IP_83XX:
+		new_fsl_chan->toggle_ext_start = fsl_chan_toggle_ext_start;
 		new_fsl_chan->set_src_loop_size = fsl_chan_set_src_loop_size;
 		new_fsl_chan->set_dest_loop_size = fsl_chan_set_dest_loop_size;
 	}
diff --git a/drivers/dma/fsldma.h b/drivers/dma/fsldma.h
index 4f21a51..dc7f268 100644
--- a/drivers/dma/fsldma.h
+++ b/drivers/dma/fsldma.h
@@ -38,6 +38,7 @@
 
 /* Special MR definition for MPC8349 */
 #define FSL_DMA_MR_EOTIE	0x00000080
+#define FSL_DMA_MR_PRC_RM	0x00000800
 
 #define FSL_DMA_SR_CH		0x00000020
 #define FSL_DMA_SR_PE		0x00000010
diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c
index ddab94f..3f23eab 100644
--- a/drivers/dma/mv_xor.c
+++ b/drivers/dma/mv_xor.c
@@ -1176,7 +1176,7 @@ static int __devinit mv_xor_probe(struct platform_device *pdev)
 	if (dma_has_cap(DMA_MEMSET, dma_dev->cap_mask))
 		dma_dev->device_prep_dma_memset = mv_xor_prep_dma_memset;
 	if (dma_has_cap(DMA_XOR, dma_dev->cap_mask)) {
-		dma_dev->max_xor = 8;                  ;
+		dma_dev->max_xor = 8;
 		dma_dev->device_prep_dma_xor = mv_xor_prep_dma_xor;
 	}
 
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 858fe60..24964c1 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -970,7 +970,7 @@ static void amd64_read_dct_base_mask(struct amd64_pvt *pvt)
 	}
 
 	for (cs = 0; cs < pvt->num_dcsm; cs++) {
-		reg = K8_DCSB0 + (cs * 4);
+		reg = K8_DCSM0 + (cs * 4);
 		err = pci_read_config_dword(pvt->dram_f2_ctl, reg,
 					&pvt->dcsm0[cs]);
 		if (unlikely(err))
diff --git a/drivers/edac/x38_edac.c b/drivers/edac/x38_edac.c
index 2406c2c..d4ec605 100644
--- a/drivers/edac/x38_edac.c
+++ b/drivers/edac/x38_edac.c
@@ -30,7 +30,7 @@
 /* Intel X38 register addresses - device 0 function 0 - DRAM Controller */
 
 #define X38_MCHBAR_LOW	0x48	/* MCH Memory Mapped Register BAR */
-#define X38_MCHBAR_HIGH	0x4b
+#define X38_MCHBAR_HIGH	0x4c
 #define X38_MCHBAR_MASK	0xfffffc000ULL	/* bits 35:14 */
 #define X38_MMR_WINDOW_SIZE	16384
 
diff --git a/drivers/gpu/drm/radeon/Makefile b/drivers/gpu/drm/radeon/Makefile
index 5fae1e0..013d380 100644
--- a/drivers/gpu/drm/radeon/Makefile
+++ b/drivers/gpu/drm/radeon/Makefile
@@ -13,7 +13,8 @@ radeon-$(CONFIG_DRM_RADEON_KMS) += radeon_device.o radeon_kms.o \
 	radeon_encoders.o radeon_display.o radeon_cursor.o radeon_i2c.o \
 	radeon_clocks.o radeon_fb.o radeon_gem.o radeon_ring.o radeon_irq_kms.o \
 	radeon_cs.o radeon_bios.o radeon_benchmark.o r100.o r300.o r420.o \
-	rs400.o rs600.o rs690.o rv515.o r520.o r600.o rs780.o rv770.o
+	rs400.o rs600.o rs690.o rv515.o r520.o r600.o rs780.o rv770.o \
+	radeon_test.o
 
 radeon-$(CONFIG_COMPAT) += radeon_ioc32.o
 
diff --git a/drivers/gpu/drm/radeon/atombios_crtc.c b/drivers/gpu/drm/radeon/atombios_crtc.c
index c0080cc..74d034f 100644
--- a/drivers/gpu/drm/radeon/atombios_crtc.c
+++ b/drivers/gpu/drm/radeon/atombios_crtc.c
@@ -31,6 +31,132 @@
 #include "atom.h"
 #include "atom-bits.h"
 
+static void atombios_overscan_setup(struct drm_crtc *crtc,
+				    struct drm_display_mode *mode,
+				    struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	SET_CRTC_OVERSCAN_PS_ALLOCATION args;
+	int index = GetIndexIntoMasterTable(COMMAND, SetCRTC_OverScan);
+	int a1, a2;
+
+	memset(&args, 0, sizeof(args));
+
+	args.usOverscanRight = 0;
+	args.usOverscanLeft = 0;
+	args.usOverscanBottom = 0;
+	args.usOverscanTop = 0;
+	args.ucCRTC = radeon_crtc->crtc_id;
+
+	switch (radeon_crtc->rmx_type) {
+	case RMX_CENTER:
+		args.usOverscanTop = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2;
+		args.usOverscanBottom = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2;
+		args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2;
+		args.usOverscanRight = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2;
+		atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+		break;
+	case RMX_ASPECT:
+		a1 = mode->crtc_vdisplay * adjusted_mode->crtc_hdisplay;
+		a2 = adjusted_mode->crtc_vdisplay * mode->crtc_hdisplay;
+
+		if (a1 > a2) {
+			args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2;
+			args.usOverscanRight = (adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2;
+		} else if (a2 > a1) {
+			args.usOverscanLeft = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2;
+			args.usOverscanRight = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2;
+		}
+		atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+		break;
+	case RMX_FULL:
+	default:
+		args.usOverscanRight = 0;
+		args.usOverscanLeft = 0;
+		args.usOverscanBottom = 0;
+		args.usOverscanTop = 0;
+		atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+		break;
+	}
+}
+
+static void atombios_scaler_setup(struct drm_crtc *crtc)
+{
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	ENABLE_SCALER_PS_ALLOCATION args;
+	int index = GetIndexIntoMasterTable(COMMAND, EnableScaler);
+	/* fixme - fill in enc_priv for atom dac */
+	enum radeon_tv_std tv_std = TV_STD_NTSC;
+
+	if (!ASIC_IS_AVIVO(rdev) && radeon_crtc->crtc_id)
+		return;
+
+	memset(&args, 0, sizeof(args));
+
+	args.ucScaler = radeon_crtc->crtc_id;
+
+	if (radeon_crtc->devices & (ATOM_DEVICE_TV_SUPPORT)) {
+		switch (tv_std) {
+		case TV_STD_NTSC:
+		default:
+			args.ucTVStandard = ATOM_TV_NTSC;
+			break;
+		case TV_STD_PAL:
+			args.ucTVStandard = ATOM_TV_PAL;
+			break;
+		case TV_STD_PAL_M:
+			args.ucTVStandard = ATOM_TV_PALM;
+			break;
+		case TV_STD_PAL_60:
+			args.ucTVStandard = ATOM_TV_PAL60;
+			break;
+		case TV_STD_NTSC_J:
+			args.ucTVStandard = ATOM_TV_NTSCJ;
+			break;
+		case TV_STD_SCART_PAL:
+			args.ucTVStandard = ATOM_TV_PAL; /* ??? */
+			break;
+		case TV_STD_SECAM:
+			args.ucTVStandard = ATOM_TV_SECAM;
+			break;
+		case TV_STD_PAL_CN:
+			args.ucTVStandard = ATOM_TV_PALCN;
+			break;
+		}
+		args.ucEnable = SCALER_ENABLE_MULTITAP_MODE;
+	} else if (radeon_crtc->devices & (ATOM_DEVICE_CV_SUPPORT)) {
+		args.ucTVStandard = ATOM_TV_CV;
+		args.ucEnable = SCALER_ENABLE_MULTITAP_MODE;
+	} else {
+		switch (radeon_crtc->rmx_type) {
+		case RMX_FULL:
+			args.ucEnable = ATOM_SCALER_EXPANSION;
+			break;
+		case RMX_CENTER:
+			args.ucEnable = ATOM_SCALER_CENTER;
+			break;
+		case RMX_ASPECT:
+			args.ucEnable = ATOM_SCALER_EXPANSION;
+			break;
+		default:
+			if (ASIC_IS_AVIVO(rdev))
+				args.ucEnable = ATOM_SCALER_DISABLE;
+			else
+				args.ucEnable = ATOM_SCALER_CENTER;
+			break;
+		}
+	}
+	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
+	if (radeon_crtc->devices & (ATOM_DEVICE_CV_SUPPORT | ATOM_DEVICE_TV_SUPPORT)
+	    && rdev->family >= CHIP_RV515 && rdev->family <= CHIP_RV570) {
+		atom_rv515_force_tv_scaler(rdev);
+	}
+}
+
 static void atombios_lock_crtc(struct drm_crtc *crtc, int lock)
 {
 	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
@@ -203,6 +329,12 @@ void atombios_crtc_set_pll(struct drm_crtc *crtc, struct drm_display_mode *mode)
 	if (ASIC_IS_AVIVO(rdev)) {
 		uint32_t ss_cntl;
 
+		if ((rdev->family == CHIP_RS600) ||
+		    (rdev->family == CHIP_RS690) ||
+		    (rdev->family == CHIP_RS740))
+			pll_flags |= (RADEON_PLL_USE_FRAC_FB_DIV |
+				      RADEON_PLL_PREFER_CLOSEST_LOWER);
+
 		if (ASIC_IS_DCE32(rdev) && mode->clock > 200000)	/* range limits??? */
 			pll_flags |= RADEON_PLL_PREFER_HIGH_FB_DIV;
 		else
@@ -321,7 +453,7 @@ int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y,
 	struct drm_gem_object *obj;
 	struct drm_radeon_gem_object *obj_priv;
 	uint64_t fb_location;
-	uint32_t fb_format, fb_pitch_pixels;
+	uint32_t fb_format, fb_pitch_pixels, tiling_flags;
 
 	if (!crtc->fb)
 		return -EINVAL;
@@ -358,7 +490,14 @@ int atombios_crtc_set_base(struct drm_crtc *crtc, int x, int y,
 		return -EINVAL;
 	}
 
-	/* TODO tiling */
+	radeon_object_get_tiling_flags(obj->driver_private,
+				       &tiling_flags, NULL);
+	if (tiling_flags & RADEON_TILING_MACRO)
+		fb_format |= AVIVO_D1GRPH_MACRO_ADDRESS_MODE;
+
+	if (tiling_flags & RADEON_TILING_MICRO)
+		fb_format |= AVIVO_D1GRPH_TILED;
+
 	if (radeon_crtc->crtc_id == 0)
 		WREG32(AVIVO_D1VGA_CONTROL, 0);
 	else
@@ -509,6 +648,9 @@ int atombios_crtc_mode_set(struct drm_crtc *crtc,
 		radeon_crtc_set_base(crtc, x, y, old_fb);
 		radeon_legacy_atom_set_surface(crtc);
 	}
+	atombios_overscan_setup(crtc, mode, adjusted_mode);
+	atombios_scaler_setup(crtc);
+	radeon_bandwidth_update(rdev);
 	return 0;
 }
 
@@ -516,6 +658,8 @@ static bool atombios_crtc_mode_fixup(struct drm_crtc *crtc,
 				     struct drm_display_mode *mode,
 				     struct drm_display_mode *adjusted_mode)
 {
+	if (!radeon_crtc_scaling_mode_fixup(crtc, mode, adjusted_mode))
+		return false;
 	return true;
 }
 
@@ -548,148 +692,3 @@ void radeon_atombios_init_crtc(struct drm_device *dev,
 		    AVIVO_D2CRTC_H_TOTAL - AVIVO_D1CRTC_H_TOTAL;
 	drm_crtc_helper_add(&radeon_crtc->base, &atombios_helper_funcs);
 }
-
-void radeon_init_disp_bw_avivo(struct drm_device *dev,
-			       struct drm_display_mode *mode1,
-			       uint32_t pixel_bytes1,
-			       struct drm_display_mode *mode2,
-			       uint32_t pixel_bytes2)
-{
-	struct radeon_device *rdev = dev->dev_private;
-	fixed20_12 min_mem_eff;
-	fixed20_12 peak_disp_bw, mem_bw, pix_clk, pix_clk2, temp_ff;
-	fixed20_12 sclk_ff, mclk_ff;
-	uint32_t dc_lb_memory_split, temp;
-
-	min_mem_eff.full = rfixed_const_8(0);
-	if (rdev->disp_priority == 2) {
-		uint32_t mc_init_misc_lat_timer = 0;
-		if (rdev->family == CHIP_RV515)
-			mc_init_misc_lat_timer =
-			    RREG32_MC(RV515_MC_INIT_MISC_LAT_TIMER);
-		else if (rdev->family == CHIP_RS690)
-			mc_init_misc_lat_timer =
-			    RREG32_MC(RS690_MC_INIT_MISC_LAT_TIMER);
-
-		mc_init_misc_lat_timer &=
-		    ~(R300_MC_DISP1R_INIT_LAT_MASK <<
-		      R300_MC_DISP1R_INIT_LAT_SHIFT);
-		mc_init_misc_lat_timer &=
-		    ~(R300_MC_DISP0R_INIT_LAT_MASK <<
-		      R300_MC_DISP0R_INIT_LAT_SHIFT);
-
-		if (mode2)
-			mc_init_misc_lat_timer |=
-			    (1 << R300_MC_DISP1R_INIT_LAT_SHIFT);
-		if (mode1)
-			mc_init_misc_lat_timer |=
-			    (1 << R300_MC_DISP0R_INIT_LAT_SHIFT);
-
-		if (rdev->family == CHIP_RV515)
-			WREG32_MC(RV515_MC_INIT_MISC_LAT_TIMER,
-				  mc_init_misc_lat_timer);
-		else if (rdev->family == CHIP_RS690)
-			WREG32_MC(RS690_MC_INIT_MISC_LAT_TIMER,
-				  mc_init_misc_lat_timer);
-	}
-
-	/*
-	 * determine is there is enough bw for current mode
-	 */
-	temp_ff.full = rfixed_const(100);
-	mclk_ff.full = rfixed_const(rdev->clock.default_mclk);
-	mclk_ff.full = rfixed_div(mclk_ff, temp_ff);
-	sclk_ff.full = rfixed_const(rdev->clock.default_sclk);
-	sclk_ff.full = rfixed_div(sclk_ff, temp_ff);
-
-	temp = (rdev->mc.vram_width / 8) * (rdev->mc.vram_is_ddr ? 2 : 1);
-	temp_ff.full = rfixed_const(temp);
-	mem_bw.full = rfixed_mul(mclk_ff, temp_ff);
-	mem_bw.full = rfixed_mul(mem_bw, min_mem_eff);
-
-	pix_clk.full = 0;
-	pix_clk2.full = 0;
-	peak_disp_bw.full = 0;
-	if (mode1) {
-		temp_ff.full = rfixed_const(1000);
-		pix_clk.full = rfixed_const(mode1->clock);	/* convert to fixed point */
-		pix_clk.full = rfixed_div(pix_clk, temp_ff);
-		temp_ff.full = rfixed_const(pixel_bytes1);
-		peak_disp_bw.full += rfixed_mul(pix_clk, temp_ff);
-	}
-	if (mode2) {
-		temp_ff.full = rfixed_const(1000);
-		pix_clk2.full = rfixed_const(mode2->clock);	/* convert to fixed point */
-		pix_clk2.full = rfixed_div(pix_clk2, temp_ff);
-		temp_ff.full = rfixed_const(pixel_bytes2);
-		peak_disp_bw.full += rfixed_mul(pix_clk2, temp_ff);
-	}
-
-	if (peak_disp_bw.full >= mem_bw.full) {
-		DRM_ERROR
-		    ("You may not have enough display bandwidth for current mode\n"
-		     "If you have flickering problem, try to lower resolution, refresh rate, or color depth\n");
-		printk("peak disp bw %d, mem_bw %d\n",
-		       rfixed_trunc(peak_disp_bw), rfixed_trunc(mem_bw));
-	}
-
-	/*
-	 * Line Buffer Setup
-	 * There is a single line buffer shared by both display controllers.
-	 * DC_LB_MEMORY_SPLIT controls how that line buffer is shared between the display
-	 * controllers.  The paritioning can either be done manually or via one of four
-	 * preset allocations specified in bits 1:0:
-	 * 0 - line buffer is divided in half and shared between each display controller
-	 * 1 - D1 gets 3/4 of the line buffer, D2 gets 1/4
-	 * 2 - D1 gets the whole buffer
-	 * 3 - D1 gets 1/4 of the line buffer, D2 gets 3/4
-	 * Setting bit 2 of DC_LB_MEMORY_SPLIT controls switches to manual allocation mode.
-	 * In manual allocation mode, D1 always starts at 0, D1 end/2 is specified in bits
-	 * 14:4; D2 allocation follows D1.
-	 */
-
-	/* is auto or manual better ? */
-	dc_lb_memory_split =
-	    RREG32(AVIVO_DC_LB_MEMORY_SPLIT) & ~AVIVO_DC_LB_MEMORY_SPLIT_MASK;
-	dc_lb_memory_split &= ~AVIVO_DC_LB_MEMORY_SPLIT_SHIFT_MODE;
-#if 1
-	/* auto */
-	if (mode1 && mode2) {
-		if (mode1->hdisplay > mode2->hdisplay) {
-			if (mode1->hdisplay > 2560)
-				dc_lb_memory_split |=
-				    AVIVO_DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q;
-			else
-				dc_lb_memory_split |=
-				    AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
-		} else if (mode2->hdisplay > mode1->hdisplay) {
-			if (mode2->hdisplay > 2560)
-				dc_lb_memory_split |=
-				    AVIVO_DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
-			else
-				dc_lb_memory_split |=
-				    AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
-		} else
-			dc_lb_memory_split |=
-			    AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
-	} else if (mode1) {
-		dc_lb_memory_split |= AVIVO_DC_LB_MEMORY_SPLIT_D1_ONLY;
-	} else if (mode2) {
-		dc_lb_memory_split |= AVIVO_DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
-	}
-#else
-	/* manual */
-	dc_lb_memory_split |= AVIVO_DC_LB_MEMORY_SPLIT_SHIFT_MODE;
-	dc_lb_memory_split &=
-	    ~(AVIVO_DC_LB_DISP1_END_ADR_MASK <<
-	      AVIVO_DC_LB_DISP1_END_ADR_SHIFT);
-	if (mode1) {
-		dc_lb_memory_split |=
-		    ((((mode1->hdisplay / 2) + 64) & AVIVO_DC_LB_DISP1_END_ADR_MASK)
-		     << AVIVO_DC_LB_DISP1_END_ADR_SHIFT);
-	} else if (mode2) {
-		dc_lb_memory_split |= (0 << AVIVO_DC_LB_DISP1_END_ADR_SHIFT);
-	}
-#endif
-	WREG32(AVIVO_DC_LB_MEMORY_SPLIT, dc_lb_memory_split);
-}
diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c
index c550932..05a4489 100644
--- a/drivers/gpu/drm/radeon/r100.c
+++ b/drivers/gpu/drm/radeon/r100.c
@@ -110,7 +110,7 @@ int r100_pci_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
 	if (i < 0 || i > rdev->gart.num_gpu_pages) {
 		return -EINVAL;
 	}
-	rdev->gart.table.ram.ptr[i] = cpu_to_le32((uint32_t)addr);
+	rdev->gart.table.ram.ptr[i] = cpu_to_le32(lower_32_bits(addr));
 	return 0;
 }
 
@@ -173,8 +173,12 @@ void r100_mc_setup(struct radeon_device *rdev)
 		DRM_ERROR("Failed to register debugfs file for R100 MC !\n");
 	}
 	/* Write VRAM size in case we are limiting it */
-	WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
-	tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+	WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+	/* Novell bug 204882 for RN50/M6/M7 with 8/16/32MB VRAM,
+	 * if the aperture is 64MB but we have 32MB VRAM
+	 * we report only 32MB VRAM but we have to set MC_FB_LOCATION
+	 * to 64MB, otherwise the gpu accidentially dies */
+	tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
 	tmp = REG_SET(RADEON_MC_FB_TOP, tmp >> 16);
 	tmp |= REG_SET(RADEON_MC_FB_START, rdev->mc.vram_location >> 16);
 	WREG32(RADEON_MC_FB_LOCATION, tmp);
@@ -215,7 +219,6 @@ int r100_mc_init(struct radeon_device *rdev)
 	r100_pci_gart_disable(rdev);
 
 	/* Setup GPU memory space */
-	rdev->mc.vram_location = 0xFFFFFFFFUL;
 	rdev->mc.gtt_location = 0xFFFFFFFFUL;
 	if (rdev->flags & RADEON_IS_AGP) {
 		r = radeon_agp_init(rdev);
@@ -753,6 +756,102 @@ int r100_cs_packet_parse(struct radeon_cs_parser *p,
 }
 
 /**
+ * r100_cs_packet_next_vline() - parse userspace VLINE packet
+ * @parser:		parser structure holding parsing context.
+ *
+ * Userspace sends a special sequence for VLINE waits.
+ * PACKET0 - VLINE_START_END + value
+ * PACKET0 - WAIT_UNTIL +_value
+ * RELOC (P3) - crtc_id in reloc.
+ *
+ * This function parses this and relocates the VLINE START END
+ * and WAIT UNTIL packets to the correct crtc.
+ * It also detects a switched off crtc and nulls out the
+ * wait in that case.
+ */
+int r100_cs_packet_parse_vline(struct radeon_cs_parser *p)
+{
+	struct radeon_cs_chunk *ib_chunk;
+	struct drm_mode_object *obj;
+	struct drm_crtc *crtc;
+	struct radeon_crtc *radeon_crtc;
+	struct radeon_cs_packet p3reloc, waitreloc;
+	int crtc_id;
+	int r;
+	uint32_t header, h_idx, reg;
+
+	ib_chunk = &p->chunks[p->chunk_ib_idx];
+
+	/* parse the wait until */
+	r = r100_cs_packet_parse(p, &waitreloc, p->idx);
+	if (r)
+		return r;
+
+	/* check its a wait until and only 1 count */
+	if (waitreloc.reg != RADEON_WAIT_UNTIL ||
+	    waitreloc.count != 0) {
+		DRM_ERROR("vline wait had illegal wait until segment\n");
+		r = -EINVAL;
+		return r;
+	}
+
+	if (ib_chunk->kdata[waitreloc.idx + 1] != RADEON_WAIT_CRTC_VLINE) {
+		DRM_ERROR("vline wait had illegal wait until\n");
+		r = -EINVAL;
+		return r;
+	}
+
+	/* jump over the NOP */
+	r = r100_cs_packet_parse(p, &p3reloc, p->idx);
+	if (r)
+		return r;
+
+	h_idx = p->idx - 2;
+	p->idx += waitreloc.count;
+	p->idx += p3reloc.count;
+
+	header = ib_chunk->kdata[h_idx];
+	crtc_id = ib_chunk->kdata[h_idx + 5];
+	reg = ib_chunk->kdata[h_idx] >> 2;
+	mutex_lock(&p->rdev->ddev->mode_config.mutex);
+	obj = drm_mode_object_find(p->rdev->ddev, crtc_id, DRM_MODE_OBJECT_CRTC);
+	if (!obj) {
+		DRM_ERROR("cannot find crtc %d\n", crtc_id);
+		r = -EINVAL;
+		goto out;
+	}
+	crtc = obj_to_crtc(obj);
+	radeon_crtc = to_radeon_crtc(crtc);
+	crtc_id = radeon_crtc->crtc_id;
+
+	if (!crtc->enabled) {
+		/* if the CRTC isn't enabled - we need to nop out the wait until */
+		ib_chunk->kdata[h_idx + 2] = PACKET2(0);
+		ib_chunk->kdata[h_idx + 3] = PACKET2(0);
+	} else if (crtc_id == 1) {
+		switch (reg) {
+		case AVIVO_D1MODE_VLINE_START_END:
+			header &= R300_CP_PACKET0_REG_MASK;
+			header |= AVIVO_D2MODE_VLINE_START_END >> 2;
+			break;
+		case RADEON_CRTC_GUI_TRIG_VLINE:
+			header &= R300_CP_PACKET0_REG_MASK;
+			header |= RADEON_CRTC2_GUI_TRIG_VLINE >> 2;
+			break;
+		default:
+			DRM_ERROR("unknown crtc reloc\n");
+			r = -EINVAL;
+			goto out;
+		}
+		ib_chunk->kdata[h_idx] = header;
+		ib_chunk->kdata[h_idx + 3] |= RADEON_ENG_DISPLAY_SELECT_CRTC1;
+	}
+out:
+	mutex_unlock(&p->rdev->ddev->mode_config.mutex);
+	return r;
+}
+
+/**
  * r100_cs_packet_next_reloc() - parse next packet which should be reloc packet3
  * @parser:		parser structure holding parsing context.
  * @data:		pointer to relocation data
@@ -814,6 +913,7 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
 	unsigned idx;
 	bool onereg;
 	int r;
+	u32 tile_flags = 0;
 
 	ib = p->ib->ptr;
 	ib_chunk = &p->chunks[p->chunk_ib_idx];
@@ -825,6 +925,15 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
 	}
 	for (i = 0; i <= pkt->count; i++, idx++, reg += 4) {
 		switch (reg) {
+		case RADEON_CRTC_GUI_TRIG_VLINE:
+			r = r100_cs_packet_parse_vline(p);
+			if (r) {
+				DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+						idx, reg);
+				r100_cs_dump_packet(p, pkt);
+				return r;
+			}
+			break;
 		/* FIXME: only allow PACKET3 blit? easier to check for out of
 		 * range access */
 		case RADEON_DST_PITCH_OFFSET:
@@ -838,7 +947,20 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
 			}
 			tmp = ib_chunk->kdata[idx] & 0x003fffff;
 			tmp += (((u32)reloc->lobj.gpu_offset) >> 10);
-			ib[idx] = (ib_chunk->kdata[idx] & 0xffc00000) | tmp;
+
+			if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+				tile_flags |= RADEON_DST_TILE_MACRO;
+			if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) {
+				if (reg == RADEON_SRC_PITCH_OFFSET) {
+					DRM_ERROR("Cannot src blit from microtiled surface\n");
+					r100_cs_dump_packet(p, pkt);
+					return -EINVAL;
+				}
+				tile_flags |= RADEON_DST_TILE_MICRO;
+			}
+
+			tmp |= tile_flags;
+			ib[idx] = (ib_chunk->kdata[idx] & 0x3fc00000) | tmp;
 			break;
 		case RADEON_RB3D_DEPTHOFFSET:
 		case RADEON_RB3D_COLOROFFSET:
@@ -869,6 +991,11 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
 		case R300_TX_OFFSET_0+52:
 		case R300_TX_OFFSET_0+56:
 		case R300_TX_OFFSET_0+60:
+			/* rn50 has no 3D engine so fail on any 3d setup */
+			if (ASIC_IS_RN50(p->rdev)) {
+				DRM_ERROR("attempt to use RN50 3D engine failed\n");
+				return -EINVAL;
+			}
 			r = r100_cs_packet_next_reloc(p, &reloc);
 			if (r) {
 				DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
@@ -878,6 +1005,25 @@ static int r100_packet0_check(struct radeon_cs_parser *p,
 			}
 			ib[idx] = ib_chunk->kdata[idx] + ((u32)reloc->lobj.gpu_offset);
 			break;
+		case R300_RB3D_COLORPITCH0:
+		case RADEON_RB3D_COLORPITCH:
+			r = r100_cs_packet_next_reloc(p, &reloc);
+			if (r) {
+				DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+					  idx, reg);
+				r100_cs_dump_packet(p, pkt);
+				return r;
+			}
+
+			if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+				tile_flags |= RADEON_COLOR_TILE_ENABLE;
+			if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+				tile_flags |= RADEON_COLOR_MICROTILE_ENABLE;
+
+			tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+			tmp |= tile_flags;
+			ib[idx] = tmp;
+			break;
 		default:
 			/* FIXME: we don't want to allow anyothers packet */
 			break;
@@ -1256,29 +1402,100 @@ static void r100_vram_get_type(struct radeon_device *rdev)
 	}
 }
 
-void r100_vram_info(struct radeon_device *rdev)
+static u32 r100_get_accessible_vram(struct radeon_device *rdev)
 {
-	r100_vram_get_type(rdev);
+	u32 aper_size;
+	u8 byte;
+
+	aper_size = RREG32(RADEON_CONFIG_APER_SIZE);
+
+	/* Set HDP_APER_CNTL only on cards that are known not to be broken,
+	 * that is has the 2nd generation multifunction PCI interface
+	 */
+	if (rdev->family == CHIP_RV280 ||
+	    rdev->family >= CHIP_RV350) {
+		WREG32_P(RADEON_HOST_PATH_CNTL, RADEON_HDP_APER_CNTL,
+		       ~RADEON_HDP_APER_CNTL);
+		DRM_INFO("Generation 2 PCI interface, using max accessible memory\n");
+		return aper_size * 2;
+	}
+
+	/* Older cards have all sorts of funny issues to deal with. First
+	 * check if it's a multifunction card by reading the PCI config
+	 * header type... Limit those to one aperture size
+	 */
+	pci_read_config_byte(rdev->pdev, 0xe, &byte);
+	if (byte & 0x80) {
+		DRM_INFO("Generation 1 PCI interface in multifunction mode\n");
+		DRM_INFO("Limiting VRAM to one aperture\n");
+		return aper_size;
+	}
+
+	/* Single function older card. We read HDP_APER_CNTL to see how the BIOS
+	 * have set it up. We don't write this as it's broken on some ASICs but
+	 * we expect the BIOS to have done the right thing (might be too optimistic...)
+	 */
+	if (RREG32(RADEON_HOST_PATH_CNTL) & RADEON_HDP_APER_CNTL)
+		return aper_size * 2;
+	return aper_size;
+}
+
+void r100_vram_init_sizes(struct radeon_device *rdev)
+{
+	u64 config_aper_size;
+	u32 accessible;
+
+	config_aper_size = RREG32(RADEON_CONFIG_APER_SIZE);
 
 	if (rdev->flags & RADEON_IS_IGP) {
 		uint32_t tom;
 		/* read NB_TOM to get the amount of ram stolen for the GPU */
 		tom = RREG32(RADEON_NB_TOM);
-		rdev->mc.vram_size = (((tom >> 16) - (tom & 0xffff) + 1) << 16);
-		WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
+		rdev->mc.real_vram_size = (((tom >> 16) - (tom & 0xffff) + 1) << 16);
+		/* for IGPs we need to keep VRAM where it was put by the BIOS */
+		rdev->mc.vram_location = (tom & 0xffff) << 16;
+		WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+		rdev->mc.mc_vram_size = rdev->mc.real_vram_size;
 	} else {
-		rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
+		rdev->mc.real_vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
 		/* Some production boards of m6 will report 0
 		 * if it's 8 MB
 		 */
-		if (rdev->mc.vram_size == 0) {
-			rdev->mc.vram_size = 8192 * 1024;
-			WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
+		if (rdev->mc.real_vram_size == 0) {
+			rdev->mc.real_vram_size = 8192 * 1024;
+			WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
 		}
+		/* let driver place VRAM */
+		rdev->mc.vram_location = 0xFFFFFFFFUL;
+		 /* Fix for RN50, M6, M7 with 8/16/32(??) MBs of VRAM - 
+		  * Novell bug 204882 + along with lots of ubuntu ones */
+		if (config_aper_size > rdev->mc.real_vram_size)
+			rdev->mc.mc_vram_size = config_aper_size;
+		else
+			rdev->mc.mc_vram_size = rdev->mc.real_vram_size;
 	}
 
+	/* work out accessible VRAM */
+	accessible = r100_get_accessible_vram(rdev);
+
 	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
 	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+
+	if (accessible > rdev->mc.aper_size)
+		accessible = rdev->mc.aper_size;
+
+	if (rdev->mc.mc_vram_size > rdev->mc.aper_size)
+		rdev->mc.mc_vram_size = rdev->mc.aper_size;
+
+	if (rdev->mc.real_vram_size > rdev->mc.aper_size)
+		rdev->mc.real_vram_size = rdev->mc.aper_size;
+}
+
+void r100_vram_info(struct radeon_device *rdev)
+{
+	r100_vram_get_type(rdev);
+
+	r100_vram_init_sizes(rdev);
 }
 
 
@@ -1533,3 +1750,530 @@ int r100_debugfs_mc_info_init(struct radeon_device *rdev)
 	return 0;
 #endif
 }
+
+int r100_set_surface_reg(struct radeon_device *rdev, int reg,
+			 uint32_t tiling_flags, uint32_t pitch,
+			 uint32_t offset, uint32_t obj_size)
+{
+	int surf_index = reg * 16;
+	int flags = 0;
+
+	/* r100/r200 divide by 16 */
+	if (rdev->family < CHIP_R300)
+		flags = pitch / 16;
+	else
+		flags = pitch / 8;
+
+	if (rdev->family <= CHIP_RS200) {
+		if ((tiling_flags & (RADEON_TILING_MACRO|RADEON_TILING_MICRO))
+				 == (RADEON_TILING_MACRO|RADEON_TILING_MICRO))
+			flags |= RADEON_SURF_TILE_COLOR_BOTH;
+		if (tiling_flags & RADEON_TILING_MACRO)
+			flags |= RADEON_SURF_TILE_COLOR_MACRO;
+	} else if (rdev->family <= CHIP_RV280) {
+		if (tiling_flags & (RADEON_TILING_MACRO))
+			flags |= R200_SURF_TILE_COLOR_MACRO;
+		if (tiling_flags & RADEON_TILING_MICRO)
+			flags |= R200_SURF_TILE_COLOR_MICRO;
+	} else {
+		if (tiling_flags & RADEON_TILING_MACRO)
+			flags |= R300_SURF_TILE_MACRO;
+		if (tiling_flags & RADEON_TILING_MICRO)
+			flags |= R300_SURF_TILE_MICRO;
+	}
+
+	DRM_DEBUG("writing surface %d %d %x %x\n", reg, flags, offset, offset+obj_size-1);
+	WREG32(RADEON_SURFACE0_INFO + surf_index, flags);
+	WREG32(RADEON_SURFACE0_LOWER_BOUND + surf_index, offset);
+	WREG32(RADEON_SURFACE0_UPPER_BOUND + surf_index, offset + obj_size - 1);
+	return 0;
+}
+
+void r100_clear_surface_reg(struct radeon_device *rdev, int reg)
+{
+	int surf_index = reg * 16;
+	WREG32(RADEON_SURFACE0_INFO + surf_index, 0);
+}
+
+void r100_bandwidth_update(struct radeon_device *rdev)
+{
+	fixed20_12 trcd_ff, trp_ff, tras_ff, trbs_ff, tcas_ff;
+	fixed20_12 sclk_ff, mclk_ff, sclk_eff_ff, sclk_delay_ff;
+	fixed20_12 peak_disp_bw, mem_bw, pix_clk, pix_clk2, temp_ff, crit_point_ff;
+	uint32_t temp, data, mem_trcd, mem_trp, mem_tras;
+	fixed20_12 memtcas_ff[8] = {
+		fixed_init(1),
+		fixed_init(2),
+		fixed_init(3),
+		fixed_init(0),
+		fixed_init_half(1),
+		fixed_init_half(2),
+		fixed_init(0),
+	};
+	fixed20_12 memtcas_rs480_ff[8] = {
+		fixed_init(0),
+		fixed_init(1),
+		fixed_init(2),
+		fixed_init(3),
+		fixed_init(0),
+		fixed_init_half(1),
+		fixed_init_half(2),
+		fixed_init_half(3),
+	};
+	fixed20_12 memtcas2_ff[8] = {
+		fixed_init(0),
+		fixed_init(1),
+		fixed_init(2),
+		fixed_init(3),
+		fixed_init(4),
+		fixed_init(5),
+		fixed_init(6),
+		fixed_init(7),
+	};
+	fixed20_12 memtrbs[8] = {
+		fixed_init(1),
+		fixed_init_half(1),
+		fixed_init(2),
+		fixed_init_half(2),
+		fixed_init(3),
+		fixed_init_half(3),
+		fixed_init(4),
+		fixed_init_half(4)
+	};
+	fixed20_12 memtrbs_r4xx[8] = {
+		fixed_init(4),
+		fixed_init(5),
+		fixed_init(6),
+		fixed_init(7),
+		fixed_init(8),
+		fixed_init(9),
+		fixed_init(10),
+		fixed_init(11)
+	};
+	fixed20_12 min_mem_eff;
+	fixed20_12 mc_latency_sclk, mc_latency_mclk, k1;
+	fixed20_12 cur_latency_mclk, cur_latency_sclk;
+	fixed20_12 disp_latency, disp_latency_overhead, disp_drain_rate,
+		disp_drain_rate2, read_return_rate;
+	fixed20_12 time_disp1_drop_priority;
+	int c;
+	int cur_size = 16;       /* in octawords */
+	int critical_point = 0, critical_point2;
+/* 	uint32_t read_return_rate, time_disp1_drop_priority; */
+	int stop_req, max_stop_req;
+	struct drm_display_mode *mode1 = NULL;
+	struct drm_display_mode *mode2 = NULL;
+	uint32_t pixel_bytes1 = 0;
+	uint32_t pixel_bytes2 = 0;
+
+	if (rdev->mode_info.crtcs[0]->base.enabled) {
+		mode1 = &rdev->mode_info.crtcs[0]->base.mode;
+		pixel_bytes1 = rdev->mode_info.crtcs[0]->base.fb->bits_per_pixel / 8;
+	}
+	if (rdev->mode_info.crtcs[1]->base.enabled) {
+		mode2 = &rdev->mode_info.crtcs[1]->base.mode;
+		pixel_bytes2 = rdev->mode_info.crtcs[1]->base.fb->bits_per_pixel / 8;
+	}
+
+	min_mem_eff.full = rfixed_const_8(0);
+	/* get modes */
+	if ((rdev->disp_priority == 2) && ASIC_IS_R300(rdev)) {
+		uint32_t mc_init_misc_lat_timer = RREG32(R300_MC_INIT_MISC_LAT_TIMER);
+		mc_init_misc_lat_timer &= ~(R300_MC_DISP1R_INIT_LAT_MASK << R300_MC_DISP1R_INIT_LAT_SHIFT);
+		mc_init_misc_lat_timer &= ~(R300_MC_DISP0R_INIT_LAT_MASK << R300_MC_DISP0R_INIT_LAT_SHIFT);
+		/* check crtc enables */
+		if (mode2)
+			mc_init_misc_lat_timer |= (1 << R300_MC_DISP1R_INIT_LAT_SHIFT);
+		if (mode1)
+			mc_init_misc_lat_timer |= (1 << R300_MC_DISP0R_INIT_LAT_SHIFT);
+		WREG32(R300_MC_INIT_MISC_LAT_TIMER, mc_init_misc_lat_timer);
+	}
+
+	/*
+	 * determine is there is enough bw for current mode
+	 */
+	mclk_ff.full = rfixed_const(rdev->clock.default_mclk);
+	temp_ff.full = rfixed_const(100);
+	mclk_ff.full = rfixed_div(mclk_ff, temp_ff);
+	sclk_ff.full = rfixed_const(rdev->clock.default_sclk);
+	sclk_ff.full = rfixed_div(sclk_ff, temp_ff);
+
+	temp = (rdev->mc.vram_width / 8) * (rdev->mc.vram_is_ddr ? 2 : 1);
+	temp_ff.full = rfixed_const(temp);
+	mem_bw.full = rfixed_mul(mclk_ff, temp_ff);
+
+	pix_clk.full = 0;
+	pix_clk2.full = 0;
+	peak_disp_bw.full = 0;
+	if (mode1) {
+		temp_ff.full = rfixed_const(1000);
+		pix_clk.full = rfixed_const(mode1->clock); /* convert to fixed point */
+		pix_clk.full = rfixed_div(pix_clk, temp_ff);
+		temp_ff.full = rfixed_const(pixel_bytes1);
+		peak_disp_bw.full += rfixed_mul(pix_clk, temp_ff);
+	}
+	if (mode2) {
+		temp_ff.full = rfixed_const(1000);
+		pix_clk2.full = rfixed_const(mode2->clock); /* convert to fixed point */
+		pix_clk2.full = rfixed_div(pix_clk2, temp_ff);
+		temp_ff.full = rfixed_const(pixel_bytes2);
+		peak_disp_bw.full += rfixed_mul(pix_clk2, temp_ff);
+	}
+
+	mem_bw.full = rfixed_mul(mem_bw, min_mem_eff);
+	if (peak_disp_bw.full >= mem_bw.full) {
+		DRM_ERROR("You may not have enough display bandwidth for current mode\n"
+			  "If you have flickering problem, try to lower resolution, refresh rate, or color depth\n");
+	}
+
+	/*  Get values from the EXT_MEM_CNTL register...converting its contents. */
+	temp = RREG32(RADEON_MEM_TIMING_CNTL);
+	if ((rdev->family == CHIP_RV100) || (rdev->flags & RADEON_IS_IGP)) { /* RV100, M6, IGPs */
+		mem_trcd = ((temp >> 2) & 0x3) + 1;
+		mem_trp  = ((temp & 0x3)) + 1;
+		mem_tras = ((temp & 0x70) >> 4) + 1;
+	} else if (rdev->family == CHIP_R300 ||
+		   rdev->family == CHIP_R350) { /* r300, r350 */
+		mem_trcd = (temp & 0x7) + 1;
+		mem_trp = ((temp >> 8) & 0x7) + 1;
+		mem_tras = ((temp >> 11) & 0xf) + 4;
+	} else if (rdev->family == CHIP_RV350 ||
+		   rdev->family <= CHIP_RV380) {
+		/* rv3x0 */
+		mem_trcd = (temp & 0x7) + 3;
+		mem_trp = ((temp >> 8) & 0x7) + 3;
+		mem_tras = ((temp >> 11) & 0xf) + 6;
+	} else if (rdev->family == CHIP_R420 ||
+		   rdev->family == CHIP_R423 ||
+		   rdev->family == CHIP_RV410) {
+		/* r4xx */
+		mem_trcd = (temp & 0xf) + 3;
+		if (mem_trcd > 15)
+			mem_trcd = 15;
+		mem_trp = ((temp >> 8) & 0xf) + 3;
+		if (mem_trp > 15)
+			mem_trp = 15;
+		mem_tras = ((temp >> 12) & 0x1f) + 6;
+		if (mem_tras > 31)
+			mem_tras = 31;
+	} else { /* RV200, R200 */
+		mem_trcd = (temp & 0x7) + 1;
+		mem_trp = ((temp >> 8) & 0x7) + 1;
+		mem_tras = ((temp >> 12) & 0xf) + 4;
+	}
+	/* convert to FF */
+	trcd_ff.full = rfixed_const(mem_trcd);
+	trp_ff.full = rfixed_const(mem_trp);
+	tras_ff.full = rfixed_const(mem_tras);
+
+	/* Get values from the MEM_SDRAM_MODE_REG register...converting its */
+	temp = RREG32(RADEON_MEM_SDRAM_MODE_REG);
+	data = (temp & (7 << 20)) >> 20;
+	if ((rdev->family == CHIP_RV100) || rdev->flags & RADEON_IS_IGP) {
+		if (rdev->family == CHIP_RS480) /* don't think rs400 */
+			tcas_ff = memtcas_rs480_ff[data];
+		else
+			tcas_ff = memtcas_ff[data];
+	} else
+		tcas_ff = memtcas2_ff[data];
+
+	if (rdev->family == CHIP_RS400 ||
+	    rdev->family == CHIP_RS480) {
+		/* extra cas latency stored in bits 23-25 0-4 clocks */
+		data = (temp >> 23) & 0x7;
+		if (data < 5)
+			tcas_ff.full += rfixed_const(data);
+	}
+
+	if (ASIC_IS_R300(rdev) && !(rdev->flags & RADEON_IS_IGP)) {
+		/* on the R300, Tcas is included in Trbs.
+		 */
+		temp = RREG32(RADEON_MEM_CNTL);
+		data = (R300_MEM_NUM_CHANNELS_MASK & temp);
+		if (data == 1) {
+			if (R300_MEM_USE_CD_CH_ONLY & temp) {
+				temp = RREG32(R300_MC_IND_INDEX);
+				temp &= ~R300_MC_IND_ADDR_MASK;
+				temp |= R300_MC_READ_CNTL_CD_mcind;
+				WREG32(R300_MC_IND_INDEX, temp);
+				temp = RREG32(R300_MC_IND_DATA);
+				data = (R300_MEM_RBS_POSITION_C_MASK & temp);
+			} else {
+				temp = RREG32(R300_MC_READ_CNTL_AB);
+				data = (R300_MEM_RBS_POSITION_A_MASK & temp);
+			}
+		} else {
+			temp = RREG32(R300_MC_READ_CNTL_AB);
+			data = (R300_MEM_RBS_POSITION_A_MASK & temp);
+		}
+		if (rdev->family == CHIP_RV410 ||
+		    rdev->family == CHIP_R420 ||
+		    rdev->family == CHIP_R423)
+			trbs_ff = memtrbs_r4xx[data];
+		else
+			trbs_ff = memtrbs[data];
+		tcas_ff.full += trbs_ff.full;
+	}
+
+	sclk_eff_ff.full = sclk_ff.full;
+
+	if (rdev->flags & RADEON_IS_AGP) {
+		fixed20_12 agpmode_ff;
+		agpmode_ff.full = rfixed_const(radeon_agpmode);
+		temp_ff.full = rfixed_const_666(16);
+		sclk_eff_ff.full -= rfixed_mul(agpmode_ff, temp_ff);
+	}
+	/* TODO PCIE lanes may affect this - agpmode == 16?? */
+
+	if (ASIC_IS_R300(rdev)) {
+		sclk_delay_ff.full = rfixed_const(250);
+	} else {
+		if ((rdev->family == CHIP_RV100) ||
+		    rdev->flags & RADEON_IS_IGP) {
+			if (rdev->mc.vram_is_ddr)
+				sclk_delay_ff.full = rfixed_const(41);
+			else
+				sclk_delay_ff.full = rfixed_const(33);
+		} else {
+			if (rdev->mc.vram_width == 128)
+				sclk_delay_ff.full = rfixed_const(57);
+			else
+				sclk_delay_ff.full = rfixed_const(41);
+		}
+	}
+
+	mc_latency_sclk.full = rfixed_div(sclk_delay_ff, sclk_eff_ff);
+
+	if (rdev->mc.vram_is_ddr) {
+		if (rdev->mc.vram_width == 32) {
+			k1.full = rfixed_const(40);
+			c  = 3;
+		} else {
+			k1.full = rfixed_const(20);
+			c  = 1;
+		}
+	} else {
+		k1.full = rfixed_const(40);
+		c  = 3;
+	}
+
+	temp_ff.full = rfixed_const(2);
+	mc_latency_mclk.full = rfixed_mul(trcd_ff, temp_ff);
+	temp_ff.full = rfixed_const(c);
+	mc_latency_mclk.full += rfixed_mul(tcas_ff, temp_ff);
+	temp_ff.full = rfixed_const(4);
+	mc_latency_mclk.full += rfixed_mul(tras_ff, temp_ff);
+	mc_latency_mclk.full += rfixed_mul(trp_ff, temp_ff);
+	mc_latency_mclk.full += k1.full;
+
+	mc_latency_mclk.full = rfixed_div(mc_latency_mclk, mclk_ff);
+	mc_latency_mclk.full += rfixed_div(temp_ff, sclk_eff_ff);
+
+	/*
+	  HW cursor time assuming worst case of full size colour cursor.
+	*/
+	temp_ff.full = rfixed_const((2 * (cur_size - (rdev->mc.vram_is_ddr + 1))));
+	temp_ff.full += trcd_ff.full;
+	if (temp_ff.full < tras_ff.full)
+		temp_ff.full = tras_ff.full;
+	cur_latency_mclk.full = rfixed_div(temp_ff, mclk_ff);
+
+	temp_ff.full = rfixed_const(cur_size);
+	cur_latency_sclk.full = rfixed_div(temp_ff, sclk_eff_ff);
+	/*
+	  Find the total latency for the display data.
+	*/
+	disp_latency_overhead.full = rfixed_const(80);
+	disp_latency_overhead.full = rfixed_div(disp_latency_overhead, sclk_ff);
+	mc_latency_mclk.full += disp_latency_overhead.full + cur_latency_mclk.full;
+	mc_latency_sclk.full += disp_latency_overhead.full + cur_latency_sclk.full;
+
+	if (mc_latency_mclk.full > mc_latency_sclk.full)
+		disp_latency.full = mc_latency_mclk.full;
+	else
+		disp_latency.full = mc_latency_sclk.full;
+
+	/* setup Max GRPH_STOP_REQ default value */
+	if (ASIC_IS_RV100(rdev))
+		max_stop_req = 0x5c;
+	else
+		max_stop_req = 0x7c;
+
+	if (mode1) {
+		/*  CRTC1
+		    Set GRPH_BUFFER_CNTL register using h/w defined optimal values.
+		    GRPH_STOP_REQ <= MIN[ 0x7C, (CRTC_H_DISP + 1) * (bit depth) / 0x10 ]
+		*/
+		stop_req = mode1->hdisplay * pixel_bytes1 / 16;
+
+		if (stop_req > max_stop_req)
+			stop_req = max_stop_req;
+
+		/*
+		  Find the drain rate of the display buffer.
+		*/
+		temp_ff.full = rfixed_const((16/pixel_bytes1));
+		disp_drain_rate.full = rfixed_div(pix_clk, temp_ff);
+
+		/*
+		  Find the critical point of the display buffer.
+		*/
+		crit_point_ff.full = rfixed_mul(disp_drain_rate, disp_latency);
+		crit_point_ff.full += rfixed_const_half(0);
+
+		critical_point = rfixed_trunc(crit_point_ff);
+
+		if (rdev->disp_priority == 2) {
+			critical_point = 0;
+		}
+
+		/*
+		  The critical point should never be above max_stop_req-4.  Setting
+		  GRPH_CRITICAL_CNTL = 0 will thus force high priority all the time.
+		*/
+		if (max_stop_req - critical_point < 4)
+			critical_point = 0;
+
+		if (critical_point == 0 && mode2 && rdev->family == CHIP_R300) {
+			/* some R300 cards have problem with this set to 0, when CRTC2 is enabled.*/
+			critical_point = 0x10;
+		}
+
+		temp = RREG32(RADEON_GRPH_BUFFER_CNTL);
+		temp &= ~(RADEON_GRPH_STOP_REQ_MASK);
+		temp |= (stop_req << RADEON_GRPH_STOP_REQ_SHIFT);
+		temp &= ~(RADEON_GRPH_START_REQ_MASK);
+		if ((rdev->family == CHIP_R350) &&
+		    (stop_req > 0x15)) {
+			stop_req -= 0x10;
+		}
+		temp |= (stop_req << RADEON_GRPH_START_REQ_SHIFT);
+		temp |= RADEON_GRPH_BUFFER_SIZE;
+		temp &= ~(RADEON_GRPH_CRITICAL_CNTL   |
+			  RADEON_GRPH_CRITICAL_AT_SOF |
+			  RADEON_GRPH_STOP_CNTL);
+		/*
+		  Write the result into the register.
+		*/
+		WREG32(RADEON_GRPH_BUFFER_CNTL, ((temp & ~RADEON_GRPH_CRITICAL_POINT_MASK) |
+						       (critical_point << RADEON_GRPH_CRITICAL_POINT_SHIFT)));
+
+#if 0
+		if ((rdev->family == CHIP_RS400) ||
+		    (rdev->family == CHIP_RS480)) {
+			/* attempt to program RS400 disp regs correctly ??? */
+			temp = RREG32(RS400_DISP1_REG_CNTL);
+			temp &= ~(RS400_DISP1_START_REQ_LEVEL_MASK |
+				  RS400_DISP1_STOP_REQ_LEVEL_MASK);
+			WREG32(RS400_DISP1_REQ_CNTL1, (temp |
+						       (critical_point << RS400_DISP1_START_REQ_LEVEL_SHIFT) |
+						       (critical_point << RS400_DISP1_STOP_REQ_LEVEL_SHIFT)));
+			temp = RREG32(RS400_DMIF_MEM_CNTL1);
+			temp &= ~(RS400_DISP1_CRITICAL_POINT_START_MASK |
+				  RS400_DISP1_CRITICAL_POINT_STOP_MASK);
+			WREG32(RS400_DMIF_MEM_CNTL1, (temp |
+						      (critical_point << RS400_DISP1_CRITICAL_POINT_START_SHIFT) |
+						      (critical_point << RS400_DISP1_CRITICAL_POINT_STOP_SHIFT)));
+		}
+#endif
+
+		DRM_DEBUG("GRPH_BUFFER_CNTL from to %x\n",
+			  /* 	  (unsigned int)info->SavedReg->grph_buffer_cntl, */
+			  (unsigned int)RREG32(RADEON_GRPH_BUFFER_CNTL));
+	}
+
+	if (mode2) {
+		u32 grph2_cntl;
+		stop_req = mode2->hdisplay * pixel_bytes2 / 16;
+
+		if (stop_req > max_stop_req)
+			stop_req = max_stop_req;
+
+		/*
+		  Find the drain rate of the display buffer.
+		*/
+		temp_ff.full = rfixed_const((16/pixel_bytes2));
+		disp_drain_rate2.full = rfixed_div(pix_clk2, temp_ff);
+
+		grph2_cntl = RREG32(RADEON_GRPH2_BUFFER_CNTL);
+		grph2_cntl &= ~(RADEON_GRPH_STOP_REQ_MASK);
+		grph2_cntl |= (stop_req << RADEON_GRPH_STOP_REQ_SHIFT);
+		grph2_cntl &= ~(RADEON_GRPH_START_REQ_MASK);
+		if ((rdev->family == CHIP_R350) &&
+		    (stop_req > 0x15)) {
+			stop_req -= 0x10;
+		}
+		grph2_cntl |= (stop_req << RADEON_GRPH_START_REQ_SHIFT);
+		grph2_cntl |= RADEON_GRPH_BUFFER_SIZE;
+		grph2_cntl &= ~(RADEON_GRPH_CRITICAL_CNTL   |
+			  RADEON_GRPH_CRITICAL_AT_SOF |
+			  RADEON_GRPH_STOP_CNTL);
+
+		if ((rdev->family == CHIP_RS100) ||
+		    (rdev->family == CHIP_RS200))
+			critical_point2 = 0;
+		else {
+			temp = (rdev->mc.vram_width * rdev->mc.vram_is_ddr + 1)/128;
+			temp_ff.full = rfixed_const(temp);
+			temp_ff.full = rfixed_mul(mclk_ff, temp_ff);
+			if (sclk_ff.full < temp_ff.full)
+				temp_ff.full = sclk_ff.full;
+
+			read_return_rate.full = temp_ff.full;
+
+			if (mode1) {
+				temp_ff.full = read_return_rate.full - disp_drain_rate.full;
+				time_disp1_drop_priority.full = rfixed_div(crit_point_ff, temp_ff);
+			} else {
+				time_disp1_drop_priority.full = 0;
+			}
+			crit_point_ff.full = disp_latency.full + time_disp1_drop_priority.full + disp_latency.full;
+			crit_point_ff.full = rfixed_mul(crit_point_ff, disp_drain_rate2);
+			crit_point_ff.full += rfixed_const_half(0);
+
+			critical_point2 = rfixed_trunc(crit_point_ff);
+
+			if (rdev->disp_priority == 2) {
+				critical_point2 = 0;
+			}
+
+			if (max_stop_req - critical_point2 < 4)
+				critical_point2 = 0;
+
+		}
+
+		if (critical_point2 == 0 && rdev->family == CHIP_R300) {
+			/* some R300 cards have problem with this set to 0 */
+			critical_point2 = 0x10;
+		}
+
+		WREG32(RADEON_GRPH2_BUFFER_CNTL, ((grph2_cntl & ~RADEON_GRPH_CRITICAL_POINT_MASK) |
+						  (critical_point2 << RADEON_GRPH_CRITICAL_POINT_SHIFT)));
+
+		if ((rdev->family == CHIP_RS400) ||
+		    (rdev->family == CHIP_RS480)) {
+#if 0
+			/* attempt to program RS400 disp2 regs correctly ??? */
+			temp = RREG32(RS400_DISP2_REQ_CNTL1);
+			temp &= ~(RS400_DISP2_START_REQ_LEVEL_MASK |
+				  RS400_DISP2_STOP_REQ_LEVEL_MASK);
+			WREG32(RS400_DISP2_REQ_CNTL1, (temp |
+						       (critical_point2 << RS400_DISP1_START_REQ_LEVEL_SHIFT) |
+						       (critical_point2 << RS400_DISP1_STOP_REQ_LEVEL_SHIFT)));
+			temp = RREG32(RS400_DISP2_REQ_CNTL2);
+			temp &= ~(RS400_DISP2_CRITICAL_POINT_START_MASK |
+				  RS400_DISP2_CRITICAL_POINT_STOP_MASK);
+			WREG32(RS400_DISP2_REQ_CNTL2, (temp |
+						       (critical_point2 << RS400_DISP2_CRITICAL_POINT_START_SHIFT) |
+						       (critical_point2 << RS400_DISP2_CRITICAL_POINT_STOP_SHIFT)));
+#endif
+			WREG32(RS400_DISP2_REQ_CNTL1, 0x105DC1CC);
+			WREG32(RS400_DISP2_REQ_CNTL2, 0x2749D000);
+			WREG32(RS400_DMIF_MEM_CNTL1,  0x29CA71DC);
+			WREG32(RS400_DISP1_REQ_CNTL1, 0x28FBC3AC);
+		}
+
+		DRM_DEBUG("GRPH2_BUFFER_CNTL from to %x\n",
+			  (unsigned int)RREG32(RADEON_GRPH2_BUFFER_CNTL));
+	}
+}
diff --git a/drivers/gpu/drm/radeon/r300.c b/drivers/gpu/drm/radeon/r300.c
index e2ed5bc..9c8d415 100644
--- a/drivers/gpu/drm/radeon/r300.c
+++ b/drivers/gpu/drm/radeon/r300.c
@@ -30,6 +30,8 @@
 #include "drm.h"
 #include "radeon_reg.h"
 #include "radeon.h"
+#include "radeon_drm.h"
+#include "radeon_share.h"
 
 /* r300,r350,rv350,rv370,rv380 depends on : */
 void r100_hdp_reset(struct radeon_device *rdev);
@@ -44,6 +46,7 @@ int r100_gui_wait_for_idle(struct radeon_device *rdev);
 int r100_cs_packet_parse(struct radeon_cs_parser *p,
 			 struct radeon_cs_packet *pkt,
 			 unsigned idx);
+int r100_cs_packet_parse_vline(struct radeon_cs_parser *p);
 int r100_cs_packet_next_reloc(struct radeon_cs_parser *p,
 			      struct radeon_cs_reloc **cs_reloc);
 int r100_cs_parse_packet0(struct radeon_cs_parser *p,
@@ -150,8 +153,13 @@ int rv370_pcie_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
 	if (i < 0 || i > rdev->gart.num_gpu_pages) {
 		return -EINVAL;
 	}
-	addr = (((u32)addr) >> 8) | ((upper_32_bits(addr) & 0xff) << 4) | 0xC;
-	writel(cpu_to_le32(addr), ((void __iomem *)ptr) + (i * 4));
+	addr = (lower_32_bits(addr) >> 8) |
+	       ((upper_32_bits(addr) & 0xff) << 24) |
+	       0xc;
+	/* on x86 we want this to be CPU endian, on powerpc
+	 * on powerpc without HW swappers, it'll get swapped on way
+	 * into VRAM - so no need for cpu_to_le32 on VRAM tables */
+	writel(addr, ((void __iomem *)ptr) + (i * 4));
 	return 0;
 }
 
@@ -579,10 +587,8 @@ void r300_vram_info(struct radeon_device *rdev)
 	} else {
 		rdev->mc.vram_width = 64;
 	}
-	rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
 
-	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
-	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+	r100_vram_init_sizes(rdev);
 }
 
 
@@ -970,7 +976,7 @@ static inline void r300_cs_track_clear(struct r300_cs_track *track)
 
 static const unsigned r300_reg_safe_bm[159] = {
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-	0xFFFFFFBF, 0xFFFFFFFF, 0xFFFFFFBF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
@@ -1019,7 +1025,7 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 	struct radeon_cs_reloc *reloc;
 	struct r300_cs_track *track;
 	volatile uint32_t *ib;
-	uint32_t tmp;
+	uint32_t tmp, tile_flags = 0;
 	unsigned i;
 	int r;
 
@@ -1027,6 +1033,16 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 	ib_chunk = &p->chunks[p->chunk_ib_idx];
 	track = (struct r300_cs_track*)p->track;
 	switch(reg) {
+	case AVIVO_D1MODE_VLINE_START_END:
+	case RADEON_CRTC_GUI_TRIG_VLINE:
+		r = r100_cs_packet_parse_vline(p);
+		if (r) {
+			DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+					idx, reg);
+			r100_cs_dump_packet(p, pkt);
+			return r;
+		}
+		break;
 	case RADEON_DST_PITCH_OFFSET:
 	case RADEON_SRC_PITCH_OFFSET:
 		r = r100_cs_packet_next_reloc(p, &reloc);
@@ -1038,7 +1054,19 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 		}
 		tmp = ib_chunk->kdata[idx] & 0x003fffff;
 		tmp += (((u32)reloc->lobj.gpu_offset) >> 10);
-		ib[idx] = (ib_chunk->kdata[idx] & 0xffc00000) | tmp;
+
+		if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+			tile_flags |= RADEON_DST_TILE_MACRO;
+		if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO) {
+			if (reg == RADEON_SRC_PITCH_OFFSET) {
+				DRM_ERROR("Cannot src blit from microtiled surface\n");
+				r100_cs_dump_packet(p, pkt);
+				return -EINVAL;
+			}
+			tile_flags |= RADEON_DST_TILE_MICRO;
+		}
+		tmp |= tile_flags;
+		ib[idx] = (ib_chunk->kdata[idx] & 0x3fc00000) | tmp;
 		break;
 	case R300_RB3D_COLOROFFSET0:
 	case R300_RB3D_COLOROFFSET1:
@@ -1127,6 +1155,23 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 		/* RB3D_COLORPITCH1 */
 		/* RB3D_COLORPITCH2 */
 		/* RB3D_COLORPITCH3 */
+		r = r100_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+				  idx, reg);
+			r100_cs_dump_packet(p, pkt);
+			return r;
+		}
+
+		if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+			tile_flags |= R300_COLOR_TILE_ENABLE;
+		if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+			tile_flags |= R300_COLOR_MICROTILE_ENABLE;
+
+		tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+		tmp |= tile_flags;
+		ib[idx] = tmp;
+
 		i = (reg - 0x4E38) >> 2;
 		track->cb[i].pitch = ib_chunk->kdata[idx] & 0x3FFE;
 		switch (((ib_chunk->kdata[idx] >> 21) & 0xF)) {
@@ -1182,6 +1227,23 @@ static int r300_packet0_check(struct radeon_cs_parser *p,
 		break;
 	case 0x4F24:
 		/* ZB_DEPTHPITCH */
+		r = r100_cs_packet_next_reloc(p, &reloc);
+		if (r) {
+			DRM_ERROR("No reloc for ib[%d]=0x%04X\n",
+				  idx, reg);
+			r100_cs_dump_packet(p, pkt);
+			return r;
+		}
+
+		if (reloc->lobj.tiling_flags & RADEON_TILING_MACRO)
+			tile_flags |= R300_DEPTHMACROTILE_ENABLE;
+		if (reloc->lobj.tiling_flags & RADEON_TILING_MICRO)
+			tile_flags |= R300_DEPTHMICROTILE_TILED;;
+
+		tmp = ib_chunk->kdata[idx] & ~(0x7 << 16);
+		tmp |= tile_flags;
+		ib[idx] = tmp;
+
 		track->zb.pitch = ib_chunk->kdata[idx] & 0x3FFC;
 		break;
 	case 0x4104:
diff --git a/drivers/gpu/drm/radeon/r300_reg.h b/drivers/gpu/drm/radeon/r300_reg.h
index 70f4860..4b7afef 100644
--- a/drivers/gpu/drm/radeon/r300_reg.h
+++ b/drivers/gpu/drm/radeon/r300_reg.h
@@ -27,7 +27,9 @@
 #ifndef _R300_REG_H_
 #define _R300_REG_H_
 
-
+#define R300_SURF_TILE_MACRO (1<<16)
+#define R300_SURF_TILE_MICRO (2<<16)
+#define R300_SURF_TILE_BOTH (3<<16)
 
 
 #define R300_MC_INIT_MISC_LAT_TIMER	0x180
diff --git a/drivers/gpu/drm/radeon/r500_reg.h b/drivers/gpu/drm/radeon/r500_reg.h
index 9070a1c..036691b 100644
--- a/drivers/gpu/drm/radeon/r500_reg.h
+++ b/drivers/gpu/drm/radeon/r500_reg.h
@@ -445,6 +445,7 @@
 #define AVIVO_D1MODE_DATA_FORMAT                0x6528
 #       define AVIVO_D1MODE_INTERLEAVE_EN       (1 << 0)
 #define AVIVO_D1MODE_DESKTOP_HEIGHT             0x652C
+#define AVIVO_D1MODE_VLINE_START_END            0x6538
 #define AVIVO_D1MODE_VIEWPORT_START             0x6580
 #define AVIVO_D1MODE_VIEWPORT_SIZE              0x6584
 #define AVIVO_D1MODE_EXT_OVERSCAN_LEFT_RIGHT    0x6588
@@ -496,6 +497,7 @@
 #define AVIVO_D2CUR_SIZE                        0x6c10
 #define AVIVO_D2CUR_POSITION                    0x6c14
 
+#define AVIVO_D2MODE_VLINE_START_END            0x6d38
 #define AVIVO_D2MODE_VIEWPORT_START             0x6d80
 #define AVIVO_D2MODE_VIEWPORT_SIZE              0x6d84
 #define AVIVO_D2MODE_EXT_OVERSCAN_LEFT_RIGHT    0x6d88
diff --git a/drivers/gpu/drm/radeon/r520.c b/drivers/gpu/drm/radeon/r520.c
index 570a244..09fb0b6 100644
--- a/drivers/gpu/drm/radeon/r520.c
+++ b/drivers/gpu/drm/radeon/r520.c
@@ -28,6 +28,7 @@
 #include "drmP.h"
 #include "radeon_reg.h"
 #include "radeon.h"
+#include "radeon_share.h"
 
 /* r520,rv530,rv560,rv570,r580 depends on : */
 void r100_hdp_reset(struct radeon_device *rdev);
@@ -94,8 +95,8 @@ int r520_mc_init(struct radeon_device *rdev)
 		       "programming pipes. Bad things might happen.\n");
 	}
 	/* Write VRAM size in case we are limiting it */
-	WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
-	tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+	WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+	tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
 	tmp = REG_SET(R520_MC_FB_TOP, tmp >> 16);
 	tmp |= REG_SET(R520_MC_FB_START, rdev->mc.vram_location >> 16);
 	WREG32_MC(R520_MC_FB_LOCATION, tmp);
@@ -226,9 +227,20 @@ static void r520_vram_get_type(struct radeon_device *rdev)
 
 void r520_vram_info(struct radeon_device *rdev)
 {
+	fixed20_12 a;
+
 	r520_vram_get_type(rdev);
-	rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
 
-	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
-	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+	r100_vram_init_sizes(rdev);
+	/* FIXME: we should enforce default clock in case GPU is not in
+	 * default setup
+	 */
+	a.full = rfixed_const(100);
+	rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk);
+	rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
+}
+
+void r520_bandwidth_update(struct radeon_device *rdev)
+{
+	rv515_bandwidth_avivo_update(rdev);
 }
diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c
index c45559f..538cd90 100644
--- a/drivers/gpu/drm/radeon/r600.c
+++ b/drivers/gpu/drm/radeon/r600.c
@@ -67,7 +67,7 @@ int r600_mc_init(struct radeon_device *rdev)
 		       "programming pipes. Bad things might happen.\n");
 	}
 
-	tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+	tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
 	tmp = REG_SET(R600_MC_FB_TOP, tmp >> 24);
 	tmp |= REG_SET(R600_MC_FB_BASE, rdev->mc.vram_location >> 24);
 	WREG32(R600_MC_VM_FB_LOCATION, tmp);
@@ -140,7 +140,8 @@ void r600_vram_get_type(struct radeon_device *rdev)
 void r600_vram_info(struct radeon_device *rdev)
 {
 	r600_vram_get_type(rdev);
-	rdev->mc.vram_size = RREG32(R600_CONFIG_MEMSIZE);
+	rdev->mc.real_vram_size = RREG32(R600_CONFIG_MEMSIZE);
+	rdev->mc.mc_vram_size = rdev->mc.real_vram_size;
 
 	/* Could aper size report 0 ? */
 	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h
index d61f2fc..b1d945b 100644
--- a/drivers/gpu/drm/radeon/radeon.h
+++ b/drivers/gpu/drm/radeon/radeon.h
@@ -64,6 +64,7 @@ extern int radeon_agpmode;
 extern int radeon_vram_limit;
 extern int radeon_gart_size;
 extern int radeon_benchmarking;
+extern int radeon_testing;
 extern int radeon_connector_table;
 
 /*
@@ -113,6 +114,7 @@ enum radeon_family {
 	CHIP_RV770,
 	CHIP_RV730,
 	CHIP_RV710,
+	CHIP_RS880,
 	CHIP_LAST,
 };
 
@@ -201,6 +203,14 @@ int radeon_fence_wait_last(struct radeon_device *rdev);
 struct radeon_fence *radeon_fence_ref(struct radeon_fence *fence);
 void radeon_fence_unref(struct radeon_fence **fence);
 
+/*
+ * Tiling registers
+ */
+struct radeon_surface_reg {
+	struct radeon_object *robj;
+};
+
+#define RADEON_GEM_MAX_SURFACES 8
 
 /*
  * Radeon buffer.
@@ -213,6 +223,7 @@ struct radeon_object_list {
 	uint64_t		gpu_offset;
 	unsigned		rdomain;
 	unsigned		wdomain;
+	uint32_t                tiling_flags;
 };
 
 int radeon_object_init(struct radeon_device *rdev);
@@ -242,8 +253,15 @@ void radeon_object_list_clean(struct list_head *head);
 int radeon_object_fbdev_mmap(struct radeon_object *robj,
 			     struct vm_area_struct *vma);
 unsigned long radeon_object_size(struct radeon_object *robj);
-
-
+void radeon_object_clear_surface_reg(struct radeon_object *robj);
+int radeon_object_check_tiling(struct radeon_object *robj, bool has_moved,
+			       bool force_drop);
+void radeon_object_set_tiling_flags(struct radeon_object *robj,
+				    uint32_t tiling_flags, uint32_t pitch);
+void radeon_object_get_tiling_flags(struct radeon_object *robj, uint32_t *tiling_flags, uint32_t *pitch);
+void radeon_bo_move_notify(struct ttm_buffer_object *bo,
+			   struct ttm_mem_reg *mem);
+void radeon_bo_fault_reserve_notify(struct ttm_buffer_object *bo);
 /*
  * GEM objects.
  */
@@ -315,8 +333,11 @@ struct radeon_mc {
 	unsigned		gtt_location;
 	unsigned		gtt_size;
 	unsigned		vram_location;
-	unsigned		vram_size;
+	/* for some chips with <= 32MB we need to lie
+	 * about vram size near mc fb location */
+	unsigned		mc_vram_size;
 	unsigned		vram_width;
+	unsigned		real_vram_size;
 	int			vram_mtrr;
 	bool			vram_is_ddr;
 };
@@ -474,6 +495,39 @@ struct radeon_wb {
 	uint64_t		gpu_addr;
 };
 
+/**
+ * struct radeon_pm - power management datas
+ * @max_bandwidth:      maximum bandwidth the gpu has (MByte/s)
+ * @igp_sideport_mclk:  sideport memory clock Mhz (rs690,rs740,rs780,rs880)
+ * @igp_system_mclk:    system clock Mhz (rs690,rs740,rs780,rs880)
+ * @igp_ht_link_clk:    ht link clock Mhz (rs690,rs740,rs780,rs880)
+ * @igp_ht_link_width:  ht link width in bits (rs690,rs740,rs780,rs880)
+ * @k8_bandwidth:       k8 bandwidth the gpu has (MByte/s) (IGP)
+ * @sideport_bandwidth: sideport bandwidth the gpu has (MByte/s) (IGP)
+ * @ht_bandwidth:       ht bandwidth the gpu has (MByte/s) (IGP)
+ * @core_bandwidth:     core GPU bandwidth the gpu has (MByte/s) (IGP)
+ * @sclk:          	GPU clock Mhz (core bandwith depends of this clock)
+ * @needed_bandwidth:   current bandwidth needs
+ *
+ * It keeps track of various data needed to take powermanagement decision.
+ * Bandwith need is used to determine minimun clock of the GPU and memory.
+ * Equation between gpu/memory clock and available bandwidth is hw dependent
+ * (type of memory, bus size, efficiency, ...)
+ */
+struct radeon_pm {
+	fixed20_12		max_bandwidth;
+	fixed20_12		igp_sideport_mclk;
+	fixed20_12		igp_system_mclk;
+	fixed20_12		igp_ht_link_clk;
+	fixed20_12		igp_ht_link_width;
+	fixed20_12		k8_bandwidth;
+	fixed20_12		sideport_bandwidth;
+	fixed20_12		ht_bandwidth;
+	fixed20_12		core_bandwidth;
+	fixed20_12		sclk;
+	fixed20_12		needed_bandwidth;
+};
+
 
 /*
  * Benchmarking
@@ -482,6 +536,12 @@ void radeon_benchmark(struct radeon_device *rdev);
 
 
 /*
+ * Testing
+ */
+void radeon_test_moves(struct radeon_device *rdev);
+
+
+/*
  * Debugfs
  */
 int radeon_debugfs_add_files(struct radeon_device *rdev,
@@ -535,6 +595,11 @@ struct radeon_asic {
 	void (*set_memory_clock)(struct radeon_device *rdev, uint32_t mem_clock);
 	void (*set_pcie_lanes)(struct radeon_device *rdev, int lanes);
 	void (*set_clock_gating)(struct radeon_device *rdev, int enable);
+	int (*set_surface_reg)(struct radeon_device *rdev, int reg,
+			       uint32_t tiling_flags, uint32_t pitch,
+			       uint32_t offset, uint32_t obj_size);
+	int (*clear_surface_reg)(struct radeon_device *rdev, int reg);
+	void (*bandwidth_update)(struct radeon_device *rdev);
 };
 
 union radeon_asic_config {
@@ -566,6 +631,10 @@ int radeon_gem_busy_ioctl(struct drm_device *dev, void *data,
 int radeon_gem_wait_idle_ioctl(struct drm_device *dev, void *data,
 			      struct drm_file *filp);
 int radeon_cs_ioctl(struct drm_device *dev, void *data, struct drm_file *filp);
+int radeon_gem_set_tiling_ioctl(struct drm_device *dev, void *data,
+				struct drm_file *filp);
+int radeon_gem_get_tiling_ioctl(struct drm_device *dev, void *data,
+				struct drm_file *filp);
 
 
 /*
@@ -594,8 +663,8 @@ struct radeon_device {
 	struct radeon_object		*fbdev_robj;
 	struct radeon_framebuffer	*fbdev_rfb;
 	/* Register mmio */
-	unsigned long			rmmio_base;
-	unsigned long			rmmio_size;
+	resource_size_t			rmmio_base;
+	resource_size_t			rmmio_size;
 	void				*rmmio;
 	radeon_rreg_t			mm_rreg;
 	radeon_wreg_t			mm_wreg;
@@ -619,11 +688,14 @@ struct radeon_device {
 	struct radeon_irq		irq;
 	struct radeon_asic		*asic;
 	struct radeon_gem		gem;
+	struct radeon_pm		pm;
 	struct mutex			cs_mutex;
 	struct radeon_wb		wb;
 	bool				gpu_lockup;
 	bool				shutdown;
 	bool				suspend;
+	bool				need_dma32;
+	struct radeon_surface_reg surface_regs[RADEON_GEM_MAX_SURFACES];
 };
 
 int radeon_device_init(struct radeon_device *rdev,
@@ -670,6 +742,8 @@ void r100_pll_errata_after_index(struct radeon_device *rdev);
 /*
  * ASICs helpers.
  */
+#define ASIC_IS_RN50(rdev) ((rdev->pdev->device == 0x515e) || \
+			    (rdev->pdev->device == 0x5969))
 #define ASIC_IS_RV100(rdev) ((rdev->family == CHIP_RV100) || \
 		(rdev->family == CHIP_RV200) || \
 		(rdev->family == CHIP_RS100) || \
@@ -796,5 +870,8 @@ static inline void radeon_ring_write(struct radeon_device *rdev, uint32_t v)
 #define radeon_set_memory_clock(rdev, e) (rdev)->asic->set_engine_clock((rdev), (e))
 #define radeon_set_pcie_lanes(rdev, l) (rdev)->asic->set_pcie_lanes((rdev), (l))
 #define radeon_set_clock_gating(rdev, e) (rdev)->asic->set_clock_gating((rdev), (e))
+#define radeon_set_surface_reg(rdev, r, f, p, o, s) ((rdev)->asic->set_surface_reg((rdev), (r), (f), (p), (o), (s)))
+#define radeon_clear_surface_reg(rdev, r) ((rdev)->asic->clear_surface_reg((rdev), (r)))
+#define radeon_bandwidth_update(rdev) (rdev)->asic->bandwidth_update((rdev))
 
 #endif
diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h
index e2e5673..9a75876 100644
--- a/drivers/gpu/drm/radeon/radeon_asic.h
+++ b/drivers/gpu/drm/radeon/radeon_asic.h
@@ -71,6 +71,11 @@ int r100_copy_blit(struct radeon_device *rdev,
 		   uint64_t dst_offset,
 		   unsigned num_pages,
 		   struct radeon_fence *fence);
+int r100_set_surface_reg(struct radeon_device *rdev, int reg,
+			 uint32_t tiling_flags, uint32_t pitch,
+			 uint32_t offset, uint32_t obj_size);
+int r100_clear_surface_reg(struct radeon_device *rdev, int reg);
+void r100_bandwidth_update(struct radeon_device *rdev);
 
 static struct radeon_asic r100_asic = {
 	.init = &r100_init,
@@ -100,6 +105,9 @@ static struct radeon_asic r100_asic = {
 	.set_memory_clock = NULL,
 	.set_pcie_lanes = NULL,
 	.set_clock_gating = &radeon_legacy_set_clock_gating,
+	.set_surface_reg = r100_set_surface_reg,
+	.clear_surface_reg = r100_clear_surface_reg,
+	.bandwidth_update = &r100_bandwidth_update,
 };
 
 
@@ -128,6 +136,7 @@ int r300_copy_dma(struct radeon_device *rdev,
 		  uint64_t dst_offset,
 		  unsigned num_pages,
 		  struct radeon_fence *fence);
+
 static struct radeon_asic r300_asic = {
 	.init = &r300_init,
 	.errata = &r300_errata,
@@ -156,6 +165,9 @@ static struct radeon_asic r300_asic = {
 	.set_memory_clock = NULL,
 	.set_pcie_lanes = &rv370_set_pcie_lanes,
 	.set_clock_gating = &radeon_legacy_set_clock_gating,
+	.set_surface_reg = r100_set_surface_reg,
+	.clear_surface_reg = r100_clear_surface_reg,
+	.bandwidth_update = &r100_bandwidth_update,
 };
 
 /*
@@ -193,6 +205,9 @@ static struct radeon_asic r420_asic = {
 	.set_memory_clock = &radeon_atom_set_memory_clock,
 	.set_pcie_lanes = &rv370_set_pcie_lanes,
 	.set_clock_gating = &radeon_atom_set_clock_gating,
+	.set_surface_reg = r100_set_surface_reg,
+	.clear_surface_reg = r100_clear_surface_reg,
+	.bandwidth_update = &r100_bandwidth_update,
 };
 
 
@@ -237,6 +252,9 @@ static struct radeon_asic rs400_asic = {
 	.set_memory_clock = NULL,
 	.set_pcie_lanes = NULL,
 	.set_clock_gating = &radeon_legacy_set_clock_gating,
+	.set_surface_reg = r100_set_surface_reg,
+	.clear_surface_reg = r100_clear_surface_reg,
+	.bandwidth_update = &r100_bandwidth_update,
 };
 
 
@@ -254,6 +272,7 @@ void rs600_gart_tlb_flush(struct radeon_device *rdev);
 int rs600_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr);
 uint32_t rs600_mc_rreg(struct radeon_device *rdev, uint32_t reg);
 void rs600_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+void rs600_bandwidth_update(struct radeon_device *rdev);
 static struct radeon_asic rs600_asic = {
 	.init = &r300_init,
 	.errata = &rs600_errata,
@@ -282,6 +301,7 @@ static struct radeon_asic rs600_asic = {
 	.set_memory_clock = &radeon_atom_set_memory_clock,
 	.set_pcie_lanes = NULL,
 	.set_clock_gating = &radeon_atom_set_clock_gating,
+	.bandwidth_update = &rs600_bandwidth_update,
 };
 
 
@@ -294,6 +314,7 @@ int rs690_mc_init(struct radeon_device *rdev);
 void rs690_mc_fini(struct radeon_device *rdev);
 uint32_t rs690_mc_rreg(struct radeon_device *rdev, uint32_t reg);
 void rs690_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+void rs690_bandwidth_update(struct radeon_device *rdev);
 static struct radeon_asic rs690_asic = {
 	.init = &r300_init,
 	.errata = &rs690_errata,
@@ -322,6 +343,9 @@ static struct radeon_asic rs690_asic = {
 	.set_memory_clock = &radeon_atom_set_memory_clock,
 	.set_pcie_lanes = NULL,
 	.set_clock_gating = &radeon_atom_set_clock_gating,
+	.set_surface_reg = r100_set_surface_reg,
+	.clear_surface_reg = r100_clear_surface_reg,
+	.bandwidth_update = &rs690_bandwidth_update,
 };
 
 
@@ -339,6 +363,7 @@ void rv515_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
 void rv515_ring_start(struct radeon_device *rdev);
 uint32_t rv515_pcie_rreg(struct radeon_device *rdev, uint32_t reg);
 void rv515_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v);
+void rv515_bandwidth_update(struct radeon_device *rdev);
 static struct radeon_asic rv515_asic = {
 	.init = &rv515_init,
 	.errata = &rv515_errata,
@@ -367,6 +392,9 @@ static struct radeon_asic rv515_asic = {
 	.set_memory_clock = &radeon_atom_set_memory_clock,
 	.set_pcie_lanes = &rv370_set_pcie_lanes,
 	.set_clock_gating = &radeon_atom_set_clock_gating,
+	.set_surface_reg = r100_set_surface_reg,
+	.clear_surface_reg = r100_clear_surface_reg,
+	.bandwidth_update = &rv515_bandwidth_update,
 };
 
 
@@ -377,6 +405,7 @@ void r520_errata(struct radeon_device *rdev);
 void r520_vram_info(struct radeon_device *rdev);
 int r520_mc_init(struct radeon_device *rdev);
 void r520_mc_fini(struct radeon_device *rdev);
+void r520_bandwidth_update(struct radeon_device *rdev);
 static struct radeon_asic r520_asic = {
 	.init = &rv515_init,
 	.errata = &r520_errata,
@@ -405,6 +434,9 @@ static struct radeon_asic r520_asic = {
 	.set_memory_clock = &radeon_atom_set_memory_clock,
 	.set_pcie_lanes = &rv370_set_pcie_lanes,
 	.set_clock_gating = &radeon_atom_set_clock_gating,
+	.set_surface_reg = r100_set_surface_reg,
+	.clear_surface_reg = r100_clear_surface_reg,
+	.bandwidth_update = &r520_bandwidth_update,
 };
 
 /*
diff --git a/drivers/gpu/drm/radeon/radeon_atombios.c b/drivers/gpu/drm/radeon/radeon_atombios.c
index 1f5a1a4..fcfe5c0 100644
--- a/drivers/gpu/drm/radeon/radeon_atombios.c
+++ b/drivers/gpu/drm/radeon/radeon_atombios.c
@@ -103,7 +103,8 @@ static inline struct radeon_i2c_bus_rec radeon_lookup_gpio(struct drm_device
 static bool radeon_atom_apply_quirks(struct drm_device *dev,
 				     uint32_t supported_device,
 				     int *connector_type,
-				     struct radeon_i2c_bus_rec *i2c_bus)
+				     struct radeon_i2c_bus_rec *i2c_bus,
+				     uint8_t *line_mux)
 {
 
 	/* Asus M2A-VM HDMI board lists the DVI port as HDMI */
@@ -127,8 +128,10 @@ static bool radeon_atom_apply_quirks(struct drm_device *dev,
 	if ((dev->pdev->device == 0x5653) &&
 	    (dev->pdev->subsystem_vendor == 0x1462) &&
 	    (dev->pdev->subsystem_device == 0x0291)) {
-		if (*connector_type == DRM_MODE_CONNECTOR_LVDS)
+		if (*connector_type == DRM_MODE_CONNECTOR_LVDS) {
 			i2c_bus->valid = false;
+			*line_mux = 53;
+		}
 	}
 
 	/* Funky macbooks */
@@ -526,7 +529,7 @@ bool radeon_get_atom_connector_info_from_supported_devices_table(struct
 
 		if (!radeon_atom_apply_quirks
 		    (dev, (1 << i), &bios_connectors[i].connector_type,
-		     &bios_connectors[i].ddc_bus))
+		     &bios_connectors[i].ddc_bus, &bios_connectors[i].line_mux))
 			continue;
 
 		bios_connectors[i].valid = true;
diff --git a/drivers/gpu/drm/radeon/radeon_benchmark.c b/drivers/gpu/drm/radeon/radeon_benchmark.c
index c44403a..2e938f7 100644
--- a/drivers/gpu/drm/radeon/radeon_benchmark.c
+++ b/drivers/gpu/drm/radeon/radeon_benchmark.c
@@ -63,7 +63,7 @@ void radeon_benchmark_move(struct radeon_device *rdev, unsigned bsize,
 		if (r) {
 			goto out_cleanup;
 		}
-		r = radeon_copy_dma(rdev, saddr, daddr, size >> 14, fence);
+		r = radeon_copy_dma(rdev, saddr, daddr, size / 4096, fence);
 		if (r) {
 			goto out_cleanup;
 		}
@@ -88,7 +88,7 @@ void radeon_benchmark_move(struct radeon_device *rdev, unsigned bsize,
 		if (r) {
 			goto out_cleanup;
 		}
-		r = radeon_copy_blit(rdev, saddr, daddr, size >> 14, fence);
+		r = radeon_copy_blit(rdev, saddr, daddr, size / 4096, fence);
 		if (r) {
 			goto out_cleanup;
 		}
diff --git a/drivers/gpu/drm/radeon/radeon_cs.c b/drivers/gpu/drm/radeon/radeon_cs.c
index b843f9b..a169067 100644
--- a/drivers/gpu/drm/radeon/radeon_cs.c
+++ b/drivers/gpu/drm/radeon/radeon_cs.c
@@ -127,17 +127,23 @@ int radeon_cs_parser_init(struct radeon_cs_parser *p, void *data)
 				       sizeof(struct drm_radeon_cs_chunk))) {
 			return -EFAULT;
 		}
+		p->chunks[i].length_dw = user_chunk.length_dw;
+		p->chunks[i].kdata = NULL;
 		p->chunks[i].chunk_id = user_chunk.chunk_id;
+
 		if (p->chunks[i].chunk_id == RADEON_CHUNK_ID_RELOCS) {
 			p->chunk_relocs_idx = i;
 		}
 		if (p->chunks[i].chunk_id == RADEON_CHUNK_ID_IB) {
 			p->chunk_ib_idx = i;
+			/* zero length IB isn't useful */
+			if (p->chunks[i].length_dw == 0)
+				return -EINVAL;
 		}
+
 		p->chunks[i].length_dw = user_chunk.length_dw;
 		cdata = (uint32_t *)(unsigned long)user_chunk.chunk_data;
 
-		p->chunks[i].kdata = NULL;
 		size = p->chunks[i].length_dw * sizeof(uint32_t);
 		p->chunks[i].kdata = kzalloc(size, GFP_KERNEL);
 		if (p->chunks[i].kdata == NULL) {
diff --git a/drivers/gpu/drm/radeon/radeon_cursor.c b/drivers/gpu/drm/radeon/radeon_cursor.c
index 5232441..b13c79e 100644
--- a/drivers/gpu/drm/radeon/radeon_cursor.c
+++ b/drivers/gpu/drm/radeon/radeon_cursor.c
@@ -111,9 +111,11 @@ static void radeon_set_cursor(struct drm_crtc *crtc, struct drm_gem_object *obj,
 
 	if (ASIC_IS_AVIVO(rdev))
 		WREG32(AVIVO_D1CUR_SURFACE_ADDRESS + radeon_crtc->crtc_offset, gpu_addr);
-	else
+	else {
+		radeon_crtc->legacy_cursor_offset = gpu_addr - radeon_crtc->legacy_display_base_addr;
 		/* offset is from DISP(2)_BASE_ADDRESS */
-		WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, gpu_addr);
+		WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, radeon_crtc->legacy_cursor_offset);
+	}
 }
 
 int radeon_crtc_cursor_set(struct drm_crtc *crtc,
@@ -245,6 +247,9 @@ int radeon_crtc_cursor_move(struct drm_crtc *crtc,
 		       (RADEON_CUR_LOCK
 			| ((xorigin ? 0 : x) << 16)
 			| (yorigin ? 0 : y)));
+		/* offset is from DISP(2)_BASE_ADDRESS */
+		WREG32(RADEON_CUR_OFFSET + radeon_crtc->crtc_offset, (radeon_crtc->legacy_cursor_offset +
+								      (yorigin * 256)));
 	}
 	radeon_lock_cursor(crtc, false);
 
diff --git a/drivers/gpu/drm/radeon/radeon_device.c b/drivers/gpu/drm/radeon/radeon_device.c
index f97563d..a162ade 100644
--- a/drivers/gpu/drm/radeon/radeon_device.c
+++ b/drivers/gpu/drm/radeon/radeon_device.c
@@ -48,6 +48,8 @@ static void radeon_surface_init(struct radeon_device *rdev)
 			       i * (RADEON_SURFACE1_INFO - RADEON_SURFACE0_INFO),
 			       0);
 		}
+		/* enable surfaces */
+		WREG32(RADEON_SURFACE_CNTL, 0);
 	}
 }
 
@@ -119,7 +121,7 @@ int radeon_mc_setup(struct radeon_device *rdev)
 	if (rdev->mc.vram_location != 0xFFFFFFFFUL) {
 		/* vram location was already setup try to put gtt after
 		 * if it fits */
-		tmp = rdev->mc.vram_location + rdev->mc.vram_size;
+		tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size;
 		tmp = (tmp + rdev->mc.gtt_size - 1) & ~(rdev->mc.gtt_size - 1);
 		if ((0xFFFFFFFFUL - tmp) >= rdev->mc.gtt_size) {
 			rdev->mc.gtt_location = tmp;
@@ -134,13 +136,13 @@ int radeon_mc_setup(struct radeon_device *rdev)
 	} else if (rdev->mc.gtt_location != 0xFFFFFFFFUL) {
 		/* gtt location was already setup try to put vram before
 		 * if it fits */
-		if (rdev->mc.vram_size < rdev->mc.gtt_location) {
+		if (rdev->mc.mc_vram_size < rdev->mc.gtt_location) {
 			rdev->mc.vram_location = 0;
 		} else {
 			tmp = rdev->mc.gtt_location + rdev->mc.gtt_size;
-			tmp += (rdev->mc.vram_size - 1);
-			tmp &= ~(rdev->mc.vram_size - 1);
-			if ((0xFFFFFFFFUL - tmp) >= rdev->mc.vram_size) {
+			tmp += (rdev->mc.mc_vram_size - 1);
+			tmp &= ~(rdev->mc.mc_vram_size - 1);
+			if ((0xFFFFFFFFUL - tmp) >= rdev->mc.mc_vram_size) {
 				rdev->mc.vram_location = tmp;
 			} else {
 				printk(KERN_ERR "[drm] vram too big to fit "
@@ -150,12 +152,14 @@ int radeon_mc_setup(struct radeon_device *rdev)
 		}
 	} else {
 		rdev->mc.vram_location = 0;
-		rdev->mc.gtt_location = rdev->mc.vram_size;
+		rdev->mc.gtt_location = rdev->mc.mc_vram_size;
 	}
-	DRM_INFO("radeon: VRAM %uM\n", rdev->mc.vram_size >> 20);
+	DRM_INFO("radeon: VRAM %uM\n", rdev->mc.real_vram_size >> 20);
 	DRM_INFO("radeon: VRAM from 0x%08X to 0x%08X\n",
 		 rdev->mc.vram_location,
-		 rdev->mc.vram_location + rdev->mc.vram_size - 1);
+		 rdev->mc.vram_location + rdev->mc.mc_vram_size - 1);
+	if (rdev->mc.real_vram_size != rdev->mc.mc_vram_size)
+		DRM_INFO("radeon: VRAM less than aperture workaround enabled\n");
 	DRM_INFO("radeon: GTT %uM\n", rdev->mc.gtt_size >> 20);
 	DRM_INFO("radeon: GTT from 0x%08X to 0x%08X\n",
 		 rdev->mc.gtt_location,
@@ -450,6 +454,7 @@ int radeon_device_init(struct radeon_device *rdev,
 		       uint32_t flags)
 {
 	int r, ret;
+	int dma_bits;
 
 	DRM_INFO("radeon: Initializing kernel modesetting.\n");
 	rdev->shutdown = false;
@@ -492,8 +497,20 @@ int radeon_device_init(struct radeon_device *rdev,
 		return r;
 	}
 
-	/* Report DMA addressing limitation */
-	r = pci_set_dma_mask(rdev->pdev, DMA_BIT_MASK(32));
+	/* set DMA mask + need_dma32 flags.
+	 * PCIE - can handle 40-bits.
+	 * IGP - can handle 40-bits (in theory)
+	 * AGP - generally dma32 is safest
+	 * PCI - only dma32
+	 */
+	rdev->need_dma32 = false;
+	if (rdev->flags & RADEON_IS_AGP)
+		rdev->need_dma32 = true;
+	if (rdev->flags & RADEON_IS_PCI)
+		rdev->need_dma32 = true;
+
+	dma_bits = rdev->need_dma32 ? 32 : 40;
+	r = pci_set_dma_mask(rdev->pdev, DMA_BIT_MASK(dma_bits));
 	if (r) {
 		printk(KERN_WARNING "radeon: No suitable DMA available.\n");
 	}
@@ -546,27 +563,22 @@ int radeon_device_init(struct radeon_device *rdev,
 			radeon_combios_asic_init(rdev->ddev);
 		}
 	}
+	/* Initialize clocks */
+	r = radeon_clocks_init(rdev);
+	if (r) {
+		return r;
+	}
 	/* Get vram informations */
 	radeon_vram_info(rdev);
-	/* Device is severly broken if aper size > vram size.
-	 * for RN50/M6/M7 - Novell bug 204882 ?
-	 */
-	if (rdev->mc.vram_size < rdev->mc.aper_size) {
-		rdev->mc.aper_size = rdev->mc.vram_size;
-	}
+
 	/* Add an MTRR for the VRAM */
 	rdev->mc.vram_mtrr = mtrr_add(rdev->mc.aper_base, rdev->mc.aper_size,
 				      MTRR_TYPE_WRCOMB, 1);
 	DRM_INFO("Detected VRAM RAM=%uM, BAR=%uM\n",
-		 rdev->mc.vram_size >> 20,
+		 rdev->mc.real_vram_size >> 20,
 		 (unsigned)rdev->mc.aper_size >> 20);
 	DRM_INFO("RAM width %dbits %cDR\n",
 		 rdev->mc.vram_width, rdev->mc.vram_is_ddr ? 'D' : 'S');
-	/* Initialize clocks */
-	r = radeon_clocks_init(rdev);
-	if (r) {
-		return r;
-	}
 	/* Initialize memory controller (also test AGP) */
 	r = radeon_mc_init(rdev);
 	if (r) {
@@ -626,6 +638,9 @@ int radeon_device_init(struct radeon_device *rdev,
 	if (!ret) {
 		DRM_INFO("radeon: kernel modesetting successfully initialized.\n");
 	}
+	if (radeon_testing) {
+		radeon_test_moves(rdev);
+	}
 	if (radeon_benchmarking) {
 		radeon_benchmark(rdev);
 	}
diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c
index 3efcf1a..a8fa1bb 100644
--- a/drivers/gpu/drm/radeon/radeon_display.c
+++ b/drivers/gpu/drm/radeon/radeon_display.c
@@ -187,6 +187,7 @@ static void radeon_crtc_init(struct drm_device *dev, int index)
 
 	drm_mode_crtc_set_gamma_size(&radeon_crtc->base, 256);
 	radeon_crtc->crtc_id = index;
+	rdev->mode_info.crtcs[index] = radeon_crtc;
 
 	radeon_crtc->mode_set.crtc = &radeon_crtc->base;
 	radeon_crtc->mode_set.connectors = (struct drm_connector **)(radeon_crtc + 1);
@@ -491,7 +492,11 @@ void radeon_compute_pll(struct radeon_pll *pll,
 					tmp += (uint64_t)pll->reference_freq * 1000 * frac_feedback_div;
 					current_freq = radeon_div(tmp, ref_div * post_div);
 
-					error = abs(current_freq - freq);
+					if (flags & RADEON_PLL_PREFER_CLOSEST_LOWER) {
+						error = freq - current_freq;
+						error = error < 0 ? 0xffffffff : error;
+					} else
+						error = abs(current_freq - freq);
 					vco_diff = abs(vco - best_vco);
 
 					if ((best_vco == 0 && error < best_error) ||
@@ -657,36 +662,51 @@ void radeon_modeset_fini(struct radeon_device *rdev)
 	}
 }
 
-void radeon_init_disp_bandwidth(struct drm_device *dev)
+bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
+				struct drm_display_mode *mode,
+				struct drm_display_mode *adjusted_mode)
 {
-	struct radeon_device *rdev = dev->dev_private;
-	struct drm_display_mode *modes[2];
-	int pixel_bytes[2];
-	struct drm_crtc *crtc;
-
-	pixel_bytes[0] = pixel_bytes[1] = 0;
-	modes[0] = modes[1] = NULL;
-
-	list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
-		struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct drm_encoder *encoder;
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct radeon_encoder *radeon_encoder;
+	bool first = true;
 
-		if (crtc->enabled && crtc->fb) {
-			modes[radeon_crtc->crtc_id] = &crtc->mode;
-			pixel_bytes[radeon_crtc->crtc_id] = crtc->fb->bits_per_pixel / 8;
+	list_for_each_entry(encoder, &dev->mode_config.encoder_list, head) {
+		radeon_encoder = to_radeon_encoder(encoder);
+		if (encoder->crtc != crtc)
+			continue;
+		if (first) {
+			radeon_crtc->rmx_type = radeon_encoder->rmx_type;
+			radeon_crtc->devices = radeon_encoder->devices;
+			memcpy(&radeon_crtc->native_mode,
+				&radeon_encoder->native_mode,
+				sizeof(struct radeon_native_mode));
+			first = false;
+		} else {
+			if (radeon_crtc->rmx_type != radeon_encoder->rmx_type) {
+				/* WARNING: Right now this can't happen but
+				 * in the future we need to check that scaling
+				 * are consistent accross different encoder
+				 * (ie all encoder can work with the same
+				 *  scaling).
+				 */
+				DRM_ERROR("Scaling not consistent accross encoder.\n");
+				return false;
+			}
 		}
 	}
-
-	if (ASIC_IS_AVIVO(rdev)) {
-		radeon_init_disp_bw_avivo(dev,
-					  modes[0],
-					  pixel_bytes[0],
-					  modes[1],
-					  pixel_bytes[1]);
+	if (radeon_crtc->rmx_type != RMX_OFF) {
+		fixed20_12 a, b;
+		a.full = rfixed_const(crtc->mode.vdisplay);
+		b.full = rfixed_const(radeon_crtc->native_mode.panel_xres);
+		radeon_crtc->vsc.full = rfixed_div(a, b);
+		a.full = rfixed_const(crtc->mode.hdisplay);
+		b.full = rfixed_const(radeon_crtc->native_mode.panel_yres);
+		radeon_crtc->hsc.full = rfixed_div(a, b);
 	} else {
-		radeon_init_disp_bw_legacy(dev,
-					   modes[0],
-					   pixel_bytes[0],
-					   modes[1],
-					   pixel_bytes[1]);
+		radeon_crtc->vsc.full = rfixed_const(1);
+		radeon_crtc->hsc.full = rfixed_const(1);
 	}
+	return true;
 }
diff --git a/drivers/gpu/drm/radeon/radeon_drv.c b/drivers/gpu/drm/radeon/radeon_drv.c
index 84ba69f..3cfcee1 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.c
+++ b/drivers/gpu/drm/radeon/radeon_drv.c
@@ -89,6 +89,7 @@ int radeon_agpmode = 0;
 int radeon_vram_limit = 0;
 int radeon_gart_size = 512; /* default gart size */
 int radeon_benchmarking = 0;
+int radeon_testing = 0;
 int radeon_connector_table = 0;
 #endif
 
@@ -117,6 +118,9 @@ module_param_named(gartsize, radeon_gart_size, int, 0600);
 MODULE_PARM_DESC(benchmark, "Run benchmark");
 module_param_named(benchmark, radeon_benchmarking, int, 0444);
 
+MODULE_PARM_DESC(test, "Run tests");
+module_param_named(test, radeon_testing, int, 0444);
+
 MODULE_PARM_DESC(connector_table, "Force connector table");
 module_param_named(connector_table, radeon_connector_table, int, 0444);
 #endif
diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c
index c8ef0d1..0a92706 100644
--- a/drivers/gpu/drm/radeon/radeon_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_encoders.c
@@ -154,7 +154,6 @@ void radeon_rmx_mode_fixup(struct drm_encoder *encoder,
 
 	if (mode->hdisplay < native_mode->panel_xres ||
 	    mode->vdisplay < native_mode->panel_yres) {
-		radeon_encoder->flags |= RADEON_USE_RMX;
 		if (ASIC_IS_AVIVO(rdev)) {
 			adjusted_mode->hdisplay = native_mode->panel_xres;
 			adjusted_mode->vdisplay = native_mode->panel_yres;
@@ -197,15 +196,13 @@ void radeon_rmx_mode_fixup(struct drm_encoder *encoder,
 	}
 }
 
+
 static bool radeon_atom_mode_fixup(struct drm_encoder *encoder,
 				   struct drm_display_mode *mode,
 				   struct drm_display_mode *adjusted_mode)
 {
-
 	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
 
-	radeon_encoder->flags &= ~RADEON_USE_RMX;
-
 	drm_mode_set_crtcinfo(adjusted_mode, 0);
 
 	if (radeon_encoder->rmx_type != RMX_OFF)
@@ -808,234 +805,6 @@ atombios_dig_transmitter_setup(struct drm_encoder *encoder, int action)
 
 }
 
-static void atom_rv515_force_tv_scaler(struct radeon_device *rdev)
-{
-
-	WREG32(0x659C, 0x0);
-	WREG32(0x6594, 0x705);
-	WREG32(0x65A4, 0x10001);
-	WREG32(0x65D8, 0x0);
-	WREG32(0x65B0, 0x0);
-	WREG32(0x65C0, 0x0);
-	WREG32(0x65D4, 0x0);
-	WREG32(0x6578, 0x0);
-	WREG32(0x657C, 0x841880A8);
-	WREG32(0x6578, 0x1);
-	WREG32(0x657C, 0x84208680);
-	WREG32(0x6578, 0x2);
-	WREG32(0x657C, 0xBFF880B0);
-	WREG32(0x6578, 0x100);
-	WREG32(0x657C, 0x83D88088);
-	WREG32(0x6578, 0x101);
-	WREG32(0x657C, 0x84608680);
-	WREG32(0x6578, 0x102);
-	WREG32(0x657C, 0xBFF080D0);
-	WREG32(0x6578, 0x200);
-	WREG32(0x657C, 0x83988068);
-	WREG32(0x6578, 0x201);
-	WREG32(0x657C, 0x84A08680);
-	WREG32(0x6578, 0x202);
-	WREG32(0x657C, 0xBFF080F8);
-	WREG32(0x6578, 0x300);
-	WREG32(0x657C, 0x83588058);
-	WREG32(0x6578, 0x301);
-	WREG32(0x657C, 0x84E08660);
-	WREG32(0x6578, 0x302);
-	WREG32(0x657C, 0xBFF88120);
-	WREG32(0x6578, 0x400);
-	WREG32(0x657C, 0x83188040);
-	WREG32(0x6578, 0x401);
-	WREG32(0x657C, 0x85008660);
-	WREG32(0x6578, 0x402);
-	WREG32(0x657C, 0xBFF88150);
-	WREG32(0x6578, 0x500);
-	WREG32(0x657C, 0x82D88030);
-	WREG32(0x6578, 0x501);
-	WREG32(0x657C, 0x85408640);
-	WREG32(0x6578, 0x502);
-	WREG32(0x657C, 0xBFF88180);
-	WREG32(0x6578, 0x600);
-	WREG32(0x657C, 0x82A08018);
-	WREG32(0x6578, 0x601);
-	WREG32(0x657C, 0x85808620);
-	WREG32(0x6578, 0x602);
-	WREG32(0x657C, 0xBFF081B8);
-	WREG32(0x6578, 0x700);
-	WREG32(0x657C, 0x82608010);
-	WREG32(0x6578, 0x701);
-	WREG32(0x657C, 0x85A08600);
-	WREG32(0x6578, 0x702);
-	WREG32(0x657C, 0x800081F0);
-	WREG32(0x6578, 0x800);
-	WREG32(0x657C, 0x8228BFF8);
-	WREG32(0x6578, 0x801);
-	WREG32(0x657C, 0x85E085E0);
-	WREG32(0x6578, 0x802);
-	WREG32(0x657C, 0xBFF88228);
-	WREG32(0x6578, 0x10000);
-	WREG32(0x657C, 0x82A8BF00);
-	WREG32(0x6578, 0x10001);
-	WREG32(0x657C, 0x82A08CC0);
-	WREG32(0x6578, 0x10002);
-	WREG32(0x657C, 0x8008BEF8);
-	WREG32(0x6578, 0x10100);
-	WREG32(0x657C, 0x81F0BF28);
-	WREG32(0x6578, 0x10101);
-	WREG32(0x657C, 0x83608CA0);
-	WREG32(0x6578, 0x10102);
-	WREG32(0x657C, 0x8018BED0);
-	WREG32(0x6578, 0x10200);
-	WREG32(0x657C, 0x8148BF38);
-	WREG32(0x6578, 0x10201);
-	WREG32(0x657C, 0x84408C80);
-	WREG32(0x6578, 0x10202);
-	WREG32(0x657C, 0x8008BEB8);
-	WREG32(0x6578, 0x10300);
-	WREG32(0x657C, 0x80B0BF78);
-	WREG32(0x6578, 0x10301);
-	WREG32(0x657C, 0x85008C20);
-	WREG32(0x6578, 0x10302);
-	WREG32(0x657C, 0x8020BEA0);
-	WREG32(0x6578, 0x10400);
-	WREG32(0x657C, 0x8028BF90);
-	WREG32(0x6578, 0x10401);
-	WREG32(0x657C, 0x85E08BC0);
-	WREG32(0x6578, 0x10402);
-	WREG32(0x657C, 0x8018BE90);
-	WREG32(0x6578, 0x10500);
-	WREG32(0x657C, 0xBFB8BFB0);
-	WREG32(0x6578, 0x10501);
-	WREG32(0x657C, 0x86C08B40);
-	WREG32(0x6578, 0x10502);
-	WREG32(0x657C, 0x8010BE90);
-	WREG32(0x6578, 0x10600);
-	WREG32(0x657C, 0xBF58BFC8);
-	WREG32(0x6578, 0x10601);
-	WREG32(0x657C, 0x87A08AA0);
-	WREG32(0x6578, 0x10602);
-	WREG32(0x657C, 0x8010BE98);
-	WREG32(0x6578, 0x10700);
-	WREG32(0x657C, 0xBF10BFF0);
-	WREG32(0x6578, 0x10701);
-	WREG32(0x657C, 0x886089E0);
-	WREG32(0x6578, 0x10702);
-	WREG32(0x657C, 0x8018BEB0);
-	WREG32(0x6578, 0x10800);
-	WREG32(0x657C, 0xBED8BFE8);
-	WREG32(0x6578, 0x10801);
-	WREG32(0x657C, 0x89408940);
-	WREG32(0x6578, 0x10802);
-	WREG32(0x657C, 0xBFE8BED8);
-	WREG32(0x6578, 0x20000);
-	WREG32(0x657C, 0x80008000);
-	WREG32(0x6578, 0x20001);
-	WREG32(0x657C, 0x90008000);
-	WREG32(0x6578, 0x20002);
-	WREG32(0x657C, 0x80008000);
-	WREG32(0x6578, 0x20003);
-	WREG32(0x657C, 0x80008000);
-	WREG32(0x6578, 0x20100);
-	WREG32(0x657C, 0x80108000);
-	WREG32(0x6578, 0x20101);
-	WREG32(0x657C, 0x8FE0BF70);
-	WREG32(0x6578, 0x20102);
-	WREG32(0x657C, 0xBFE880C0);
-	WREG32(0x6578, 0x20103);
-	WREG32(0x657C, 0x80008000);
-	WREG32(0x6578, 0x20200);
-	WREG32(0x657C, 0x8018BFF8);
-	WREG32(0x6578, 0x20201);
-	WREG32(0x657C, 0x8F80BF08);
-	WREG32(0x6578, 0x20202);
-	WREG32(0x657C, 0xBFD081A0);
-	WREG32(0x6578, 0x20203);
-	WREG32(0x657C, 0xBFF88000);
-	WREG32(0x6578, 0x20300);
-	WREG32(0x657C, 0x80188000);
-	WREG32(0x6578, 0x20301);
-	WREG32(0x657C, 0x8EE0BEC0);
-	WREG32(0x6578, 0x20302);
-	WREG32(0x657C, 0xBFB082A0);
-	WREG32(0x6578, 0x20303);
-	WREG32(0x657C, 0x80008000);
-	WREG32(0x6578, 0x20400);
-	WREG32(0x657C, 0x80188000);
-	WREG32(0x6578, 0x20401);
-	WREG32(0x657C, 0x8E00BEA0);
-	WREG32(0x6578, 0x20402);
-	WREG32(0x657C, 0xBF8883C0);
-	WREG32(0x6578, 0x20403);
-	WREG32(0x657C, 0x80008000);
-	WREG32(0x6578, 0x20500);
-	WREG32(0x657C, 0x80188000);
-	WREG32(0x6578, 0x20501);
-	WREG32(0x657C, 0x8D00BE90);
-	WREG32(0x6578, 0x20502);
-	WREG32(0x657C, 0xBF588500);
-	WREG32(0x6578, 0x20503);
-	WREG32(0x657C, 0x80008008);
-	WREG32(0x6578, 0x20600);
-	WREG32(0x657C, 0x80188000);
-	WREG32(0x6578, 0x20601);
-	WREG32(0x657C, 0x8BC0BE98);
-	WREG32(0x6578, 0x20602);
-	WREG32(0x657C, 0xBF308660);
-	WREG32(0x6578, 0x20603);
-	WREG32(0x657C, 0x80008008);
-	WREG32(0x6578, 0x20700);
-	WREG32(0x657C, 0x80108000);
-	WREG32(0x6578, 0x20701);
-	WREG32(0x657C, 0x8A80BEB0);
-	WREG32(0x6578, 0x20702);
-	WREG32(0x657C, 0xBF0087C0);
-	WREG32(0x6578, 0x20703);
-	WREG32(0x657C, 0x80008008);
-	WREG32(0x6578, 0x20800);
-	WREG32(0x657C, 0x80108000);
-	WREG32(0x6578, 0x20801);
-	WREG32(0x657C, 0x8920BED0);
-	WREG32(0x6578, 0x20802);
-	WREG32(0x657C, 0xBED08920);
-	WREG32(0x6578, 0x20803);
-	WREG32(0x657C, 0x80008010);
-	WREG32(0x6578, 0x30000);
-	WREG32(0x657C, 0x90008000);
-	WREG32(0x6578, 0x30001);
-	WREG32(0x657C, 0x80008000);
-	WREG32(0x6578, 0x30100);
-	WREG32(0x657C, 0x8FE0BF90);
-	WREG32(0x6578, 0x30101);
-	WREG32(0x657C, 0xBFF880A0);
-	WREG32(0x6578, 0x30200);
-	WREG32(0x657C, 0x8F60BF40);
-	WREG32(0x6578, 0x30201);
-	WREG32(0x657C, 0xBFE88180);
-	WREG32(0x6578, 0x30300);
-	WREG32(0x657C, 0x8EC0BF00);
-	WREG32(0x6578, 0x30301);
-	WREG32(0x657C, 0xBFC88280);
-	WREG32(0x6578, 0x30400);
-	WREG32(0x657C, 0x8DE0BEE0);
-	WREG32(0x6578, 0x30401);
-	WREG32(0x657C, 0xBFA083A0);
-	WREG32(0x6578, 0x30500);
-	WREG32(0x657C, 0x8CE0BED0);
-	WREG32(0x6578, 0x30501);
-	WREG32(0x657C, 0xBF7884E0);
-	WREG32(0x6578, 0x30600);
-	WREG32(0x657C, 0x8BA0BED8);
-	WREG32(0x6578, 0x30601);
-	WREG32(0x657C, 0xBF508640);
-	WREG32(0x6578, 0x30700);
-	WREG32(0x657C, 0x8A60BEE8);
-	WREG32(0x6578, 0x30701);
-	WREG32(0x657C, 0xBF2087A0);
-	WREG32(0x6578, 0x30800);
-	WREG32(0x657C, 0x8900BF00);
-	WREG32(0x6578, 0x30801);
-	WREG32(0x657C, 0xBF008900);
-}
-
 static void
 atombios_yuv_setup(struct drm_encoder *encoder, bool enable)
 {
@@ -1074,129 +843,6 @@ atombios_yuv_setup(struct drm_encoder *encoder, bool enable)
 }
 
 static void
-atombios_overscan_setup(struct drm_encoder *encoder,
-			struct drm_display_mode *mode,
-			struct drm_display_mode *adjusted_mode)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
-	SET_CRTC_OVERSCAN_PS_ALLOCATION args;
-	int index = GetIndexIntoMasterTable(COMMAND, SetCRTC_OverScan);
-
-	memset(&args, 0, sizeof(args));
-
-	args.usOverscanRight = 0;
-	args.usOverscanLeft = 0;
-	args.usOverscanBottom = 0;
-	args.usOverscanTop = 0;
-	args.ucCRTC = radeon_crtc->crtc_id;
-
-	if (radeon_encoder->flags & RADEON_USE_RMX) {
-		if (radeon_encoder->rmx_type == RMX_FULL) {
-			args.usOverscanRight = 0;
-			args.usOverscanLeft = 0;
-			args.usOverscanBottom = 0;
-			args.usOverscanTop = 0;
-		} else if (radeon_encoder->rmx_type == RMX_CENTER) {
-			args.usOverscanTop = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2;
-			args.usOverscanBottom = (adjusted_mode->crtc_vdisplay - mode->crtc_vdisplay) / 2;
-			args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2;
-			args.usOverscanRight = (adjusted_mode->crtc_hdisplay - mode->crtc_hdisplay) / 2;
-		} else if (radeon_encoder->rmx_type == RMX_ASPECT) {
-			int a1 = mode->crtc_vdisplay * adjusted_mode->crtc_hdisplay;
-			int a2 = adjusted_mode->crtc_vdisplay * mode->crtc_hdisplay;
-
-			if (a1 > a2) {
-				args.usOverscanLeft = (adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2;
-				args.usOverscanRight = (adjusted_mode->crtc_hdisplay - (a2 / mode->crtc_vdisplay)) / 2;
-			} else if (a2 > a1) {
-				args.usOverscanLeft = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2;
-				args.usOverscanRight = (adjusted_mode->crtc_vdisplay - (a1 / mode->crtc_hdisplay)) / 2;
-			}
-		}
-	}
-
-	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
-}
-
-static void
-atombios_scaler_setup(struct drm_encoder *encoder)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	struct radeon_crtc *radeon_crtc = to_radeon_crtc(encoder->crtc);
-	ENABLE_SCALER_PS_ALLOCATION args;
-	int index = GetIndexIntoMasterTable(COMMAND, EnableScaler);
-	/* fixme - fill in enc_priv for atom dac */
-	enum radeon_tv_std tv_std = TV_STD_NTSC;
-
-	if (!ASIC_IS_AVIVO(rdev) && radeon_crtc->crtc_id)
-		return;
-
-	memset(&args, 0, sizeof(args));
-
-	args.ucScaler = radeon_crtc->crtc_id;
-
-	if (radeon_encoder->devices & (ATOM_DEVICE_TV_SUPPORT)) {
-		switch (tv_std) {
-		case TV_STD_NTSC:
-		default:
-			args.ucTVStandard = ATOM_TV_NTSC;
-			break;
-		case TV_STD_PAL:
-			args.ucTVStandard = ATOM_TV_PAL;
-			break;
-		case TV_STD_PAL_M:
-			args.ucTVStandard = ATOM_TV_PALM;
-			break;
-		case TV_STD_PAL_60:
-			args.ucTVStandard = ATOM_TV_PAL60;
-			break;
-		case TV_STD_NTSC_J:
-			args.ucTVStandard = ATOM_TV_NTSCJ;
-			break;
-		case TV_STD_SCART_PAL:
-			args.ucTVStandard = ATOM_TV_PAL; /* ??? */
-			break;
-		case TV_STD_SECAM:
-			args.ucTVStandard = ATOM_TV_SECAM;
-			break;
-		case TV_STD_PAL_CN:
-			args.ucTVStandard = ATOM_TV_PALCN;
-			break;
-		}
-		args.ucEnable = SCALER_ENABLE_MULTITAP_MODE;
-	} else if (radeon_encoder->devices & (ATOM_DEVICE_CV_SUPPORT)) {
-		args.ucTVStandard = ATOM_TV_CV;
-		args.ucEnable = SCALER_ENABLE_MULTITAP_MODE;
-	} else if (radeon_encoder->flags & RADEON_USE_RMX) {
-		if (radeon_encoder->rmx_type == RMX_FULL)
-			args.ucEnable = ATOM_SCALER_EXPANSION;
-		else if (radeon_encoder->rmx_type == RMX_CENTER)
-			args.ucEnable = ATOM_SCALER_CENTER;
-		else if (radeon_encoder->rmx_type == RMX_ASPECT)
-			args.ucEnable = ATOM_SCALER_EXPANSION;
-	} else {
-		if (ASIC_IS_AVIVO(rdev))
-			args.ucEnable = ATOM_SCALER_DISABLE;
-		else
-			args.ucEnable = ATOM_SCALER_CENTER;
-	}
-
-	atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args);
-
-	if (radeon_encoder->devices & (ATOM_DEVICE_CV_SUPPORT | ATOM_DEVICE_TV_SUPPORT)
-	    && rdev->family >= CHIP_RV515 && rdev->family <= CHIP_RV570) {
-		atom_rv515_force_tv_scaler(rdev);
-	}
-
-}
-
-static void
 radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode)
 {
 	struct drm_device *dev = encoder->dev;
@@ -1448,8 +1094,6 @@ radeon_atom_encoder_mode_set(struct drm_encoder *encoder,
 	radeon_encoder->pixel_clock = adjusted_mode->clock;
 
 	radeon_atombios_encoder_crtc_scratch_regs(encoder, radeon_crtc->crtc_id);
-	atombios_overscan_setup(encoder, mode, adjusted_mode);
-	atombios_scaler_setup(encoder);
 	atombios_set_encoder_crtc_source(encoder);
 
 	if (ASIC_IS_AVIVO(rdev)) {
@@ -1667,6 +1311,7 @@ radeon_add_atom_encoder(struct drm_device *dev, uint32_t encoder_id, uint32_t su
 
 	radeon_encoder->encoder_id = encoder_id;
 	radeon_encoder->devices = supported_device;
+	radeon_encoder->rmx_type = RMX_OFF;
 
 	switch (radeon_encoder->encoder_id) {
 	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
diff --git a/drivers/gpu/drm/radeon/radeon_fb.c b/drivers/gpu/drm/radeon/radeon_fb.c
index 9e8f191..3206c0a 100644
--- a/drivers/gpu/drm/radeon/radeon_fb.c
+++ b/drivers/gpu/drm/radeon/radeon_fb.c
@@ -101,9 +101,10 @@ static int radeonfb_setcolreg(unsigned regno,
 				break;
 			case 24:
 			case 32:
-				fb->pseudo_palette[regno] = ((red & 0xff00) << 8) |
-					(green & 0xff00) |
-					((blue  & 0xff00) >> 8);
+				fb->pseudo_palette[regno] =
+					(((red >> 8) & 0xff) << info->var.red.offset) |
+					(((green >> 8) & 0xff) << info->var.green.offset) |
+					(((blue >> 8) & 0xff) << info->var.blue.offset);
 				break;
 			}
 		}
@@ -154,6 +155,7 @@ static int radeonfb_check_var(struct fb_var_screeninfo *var,
 		var->transp.length = 0;
 		var->transp.offset = 0;
 		break;
+#ifdef __LITTLE_ENDIAN
 	case 15:
 		var->red.offset = 10;
 		var->green.offset = 5;
@@ -194,6 +196,28 @@ static int radeonfb_check_var(struct fb_var_screeninfo *var,
 		var->transp.length = 8;
 		var->transp.offset = 24;
 		break;
+#else
+	case 24:
+		var->red.offset = 8;
+		var->green.offset = 16;
+		var->blue.offset = 24;
+		var->red.length = 8;
+		var->green.length = 8;
+		var->blue.length = 8;
+		var->transp.length = 0;
+		var->transp.offset = 0;
+		break;
+	case 32:
+		var->red.offset = 8;
+		var->green.offset = 16;
+		var->blue.offset = 24;
+		var->red.length = 8;
+		var->green.length = 8;
+		var->blue.length = 8;
+		var->transp.length = 8;
+		var->transp.offset = 0;
+		break;
+#endif
 	default:
 		return -EINVAL;
 	}
@@ -447,10 +471,10 @@ static struct notifier_block paniced = {
 	.notifier_call = radeonfb_panic,
 };
 
-static int radeon_align_pitch(struct radeon_device *rdev, int width, int bpp)
+static int radeon_align_pitch(struct radeon_device *rdev, int width, int bpp, bool tiled)
 {
 	int aligned = width;
-	int align_large = (ASIC_IS_AVIVO(rdev));
+	int align_large = (ASIC_IS_AVIVO(rdev)) || tiled;
 	int pitch_mask = 0;
 
 	switch (bpp / 8) {
@@ -488,12 +512,13 @@ int radeonfb_create(struct radeon_device *rdev,
 	u64 fb_gpuaddr;
 	void *fbptr = NULL;
 	unsigned long tmp;
+	bool fb_tiled = false; /* useful for testing */
 
 	mode_cmd.width = surface_width;
 	mode_cmd.height = surface_height;
 	mode_cmd.bpp = 32;
 	/* need to align pitch with crtc limits */
-	mode_cmd.pitch = radeon_align_pitch(rdev, mode_cmd.width, mode_cmd.bpp) * ((mode_cmd.bpp + 1) / 8);
+	mode_cmd.pitch = radeon_align_pitch(rdev, mode_cmd.width, mode_cmd.bpp, fb_tiled) * ((mode_cmd.bpp + 1) / 8);
 	mode_cmd.depth = 24;
 
 	size = mode_cmd.pitch * mode_cmd.height;
@@ -511,6 +536,8 @@ int radeonfb_create(struct radeon_device *rdev,
 	}
 	robj = gobj->driver_private;
 
+	if (fb_tiled)
+		radeon_object_set_tiling_flags(robj, RADEON_TILING_MACRO|RADEON_TILING_SURFACE, mode_cmd.pitch);
 	mutex_lock(&rdev->ddev->struct_mutex);
 	fb = radeon_framebuffer_create(rdev->ddev, &mode_cmd, gobj);
 	if (fb == NULL) {
@@ -539,6 +566,9 @@ int radeonfb_create(struct radeon_device *rdev,
 	}
 	rfbdev = info->par;
 
+	if (fb_tiled)
+		radeon_object_check_tiling(robj, 0, 0);
+
 	ret = radeon_object_kmap(robj, &fbptr);
 	if (ret) {
 		goto out_unref;
@@ -572,6 +602,11 @@ int radeonfb_create(struct radeon_device *rdev,
 	info->var.width = -1;
 	info->var.xres = fb_width;
 	info->var.yres = fb_height;
+
+	/* setup aperture base/size for vesafb takeover */
+	info->aperture_base = rdev->ddev->mode_config.fb_base;
+	info->aperture_size = rdev->mc.real_vram_size;
+
 	info->fix.mmio_start = 0;
 	info->fix.mmio_len = 0;
 	info->pixmap.size = 64*1024;
@@ -600,6 +635,7 @@ int radeonfb_create(struct radeon_device *rdev,
 		info->var.transp.offset = 0;
 		info->var.transp.length = 0;
 		break;
+#ifdef __LITTLE_ENDIAN
 	case 15:
 		info->var.red.offset = 10;
 		info->var.green.offset = 5;
@@ -639,7 +675,29 @@ int radeonfb_create(struct radeon_device *rdev,
 		info->var.transp.offset = 24;
 		info->var.transp.length = 8;
 		break;
+#else
+	case 24:
+		info->var.red.offset = 8;
+		info->var.green.offset = 16;
+		info->var.blue.offset = 24;
+		info->var.red.length = 8;
+		info->var.green.length = 8;
+		info->var.blue.length = 8;
+		info->var.transp.offset = 0;
+		info->var.transp.length = 0;
+		break;
+	case 32:
+		info->var.red.offset = 8;
+		info->var.green.offset = 16;
+		info->var.blue.offset = 24;
+		info->var.red.length = 8;
+		info->var.green.length = 8;
+		info->var.blue.length = 8;
+		info->var.transp.offset = 0;
+		info->var.transp.length = 8;
+		break;
 	default:
+#endif
 		break;
 	}
 
diff --git a/drivers/gpu/drm/radeon/radeon_fence.c b/drivers/gpu/drm/radeon/radeon_fence.c
index 96afbf5..b4e48dd 100644
--- a/drivers/gpu/drm/radeon/radeon_fence.c
+++ b/drivers/gpu/drm/radeon/radeon_fence.c
@@ -195,7 +195,7 @@ retry:
 		r = wait_event_interruptible_timeout(rdev->fence_drv.queue,
 				radeon_fence_signaled(fence), timeout);
 		if (unlikely(r == -ERESTARTSYS)) {
-			return -ERESTART;
+			return -EBUSY;
 		}
 	} else {
 		r = wait_event_timeout(rdev->fence_drv.queue,
diff --git a/drivers/gpu/drm/radeon/radeon_gart.c b/drivers/gpu/drm/radeon/radeon_gart.c
index d343a15..2977539 100644
--- a/drivers/gpu/drm/radeon/radeon_gart.c
+++ b/drivers/gpu/drm/radeon/radeon_gart.c
@@ -177,7 +177,7 @@ int radeon_gart_bind(struct radeon_device *rdev, unsigned offset,
 			return -ENOMEM;
 		}
 		rdev->gart.pages[p] = pagelist[i];
-		page_base = (uint32_t)rdev->gart.pages_addr[p];
+		page_base = rdev->gart.pages_addr[p];
 		for (j = 0; j < (PAGE_SIZE / 4096); j++, t++) {
 			radeon_gart_set_page(rdev, t, page_base);
 			page_base += 4096;
diff --git a/drivers/gpu/drm/radeon/radeon_gem.c b/drivers/gpu/drm/radeon/radeon_gem.c
index eb51603..cded518 100644
--- a/drivers/gpu/drm/radeon/radeon_gem.c
+++ b/drivers/gpu/drm/radeon/radeon_gem.c
@@ -157,9 +157,9 @@ int radeon_gem_info_ioctl(struct drm_device *dev, void *data,
 	struct radeon_device *rdev = dev->dev_private;
 	struct drm_radeon_gem_info *args = data;
 
-	args->vram_size = rdev->mc.vram_size;
+	args->vram_size = rdev->mc.real_vram_size;
 	/* FIXME: report somethings that makes sense */
-	args->vram_visible = rdev->mc.vram_size - (4 * 1024 * 1024);
+	args->vram_visible = rdev->mc.real_vram_size - (4 * 1024 * 1024);
 	args->gart_size = rdev->mc.gtt_size;
 	return 0;
 }
@@ -285,3 +285,44 @@ int radeon_gem_wait_idle_ioctl(struct drm_device *dev, void *data,
 	mutex_unlock(&dev->struct_mutex);
 	return r;
 }
+
+int radeon_gem_set_tiling_ioctl(struct drm_device *dev, void *data,
+				struct drm_file *filp)
+{
+	struct drm_radeon_gem_set_tiling *args = data;
+	struct drm_gem_object *gobj;
+	struct radeon_object *robj;
+	int r = 0;
+
+	DRM_DEBUG("%d \n", args->handle);
+	gobj = drm_gem_object_lookup(dev, filp, args->handle);
+	if (gobj == NULL)
+		return -EINVAL;
+	robj = gobj->driver_private;
+	radeon_object_set_tiling_flags(robj, args->tiling_flags, args->pitch);
+	mutex_lock(&dev->struct_mutex);
+	drm_gem_object_unreference(gobj);
+	mutex_unlock(&dev->struct_mutex);
+	return r;
+}
+
+int radeon_gem_get_tiling_ioctl(struct drm_device *dev, void *data,
+				struct drm_file *filp)
+{
+	struct drm_radeon_gem_get_tiling *args = data;
+	struct drm_gem_object *gobj;
+	struct radeon_object *robj;
+	int r = 0;
+
+	DRM_DEBUG("\n");
+	gobj = drm_gem_object_lookup(dev, filp, args->handle);
+	if (gobj == NULL)
+		return -EINVAL;
+	robj = gobj->driver_private;
+	radeon_object_get_tiling_flags(robj, &args->tiling_flags,
+				       &args->pitch);
+	mutex_lock(&dev->struct_mutex);
+	drm_gem_object_unreference(gobj);
+	mutex_unlock(&dev->struct_mutex);
+	return r;
+}
diff --git a/drivers/gpu/drm/radeon/radeon_kms.c b/drivers/gpu/drm/radeon/radeon_kms.c
index 4612a7c..937a2f1 100644
--- a/drivers/gpu/drm/radeon/radeon_kms.c
+++ b/drivers/gpu/drm/radeon/radeon_kms.c
@@ -291,5 +291,7 @@ struct drm_ioctl_desc radeon_ioctls_kms[] = {
 	DRM_IOCTL_DEF(DRM_RADEON_GEM_WAIT_IDLE, radeon_gem_wait_idle_ioctl, DRM_AUTH),
 	DRM_IOCTL_DEF(DRM_RADEON_CS, radeon_cs_ioctl, DRM_AUTH),
 	DRM_IOCTL_DEF(DRM_RADEON_INFO, radeon_info_ioctl, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_GEM_SET_TILING, radeon_gem_set_tiling_ioctl, DRM_AUTH),
+	DRM_IOCTL_DEF(DRM_RADEON_GEM_GET_TILING, radeon_gem_get_tiling_ioctl, DRM_AUTH),
 };
 int radeon_max_kms_ioctl = DRM_ARRAY_SIZE(radeon_ioctls_kms);
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
index 8086ecf..7d06dc9 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_crtc.c
@@ -29,6 +29,171 @@
 #include "radeon_fixed.h"
 #include "radeon.h"
 
+static void radeon_legacy_rmx_mode_set(struct drm_crtc *crtc,
+				       struct drm_display_mode *mode,
+				       struct drm_display_mode *adjusted_mode)
+{
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	int xres = mode->hdisplay;
+	int yres = mode->vdisplay;
+	bool hscale = true, vscale = true;
+	int hsync_wid;
+	int vsync_wid;
+	int hsync_start;
+	int blank_width;
+	u32 scale, inc, crtc_more_cntl;
+	u32 fp_horz_stretch, fp_vert_stretch, fp_horz_vert_active;
+	u32 fp_h_sync_strt_wid, fp_crtc_h_total_disp;
+	u32 fp_v_sync_strt_wid, fp_crtc_v_total_disp;
+	struct radeon_native_mode *native_mode = &radeon_crtc->native_mode;
+
+	fp_vert_stretch = RREG32(RADEON_FP_VERT_STRETCH) &
+		(RADEON_VERT_STRETCH_RESERVED |
+		 RADEON_VERT_AUTO_RATIO_INC);
+	fp_horz_stretch = RREG32(RADEON_FP_HORZ_STRETCH) &
+		(RADEON_HORZ_FP_LOOP_STRETCH |
+		 RADEON_HORZ_AUTO_RATIO_INC);
+
+	crtc_more_cntl = 0;
+	if ((rdev->family == CHIP_RS100) ||
+	    (rdev->family == CHIP_RS200)) {
+		/* This is to workaround the asic bug for RMX, some versions
+		   of BIOS dosen't have this register initialized correctly. */
+		crtc_more_cntl |= RADEON_CRTC_H_CUTOFF_ACTIVE_EN;
+	}
+
+
+	fp_crtc_h_total_disp = ((((mode->crtc_htotal / 8) - 1) & 0x3ff)
+				| ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16));
+
+	hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8;
+	if (!hsync_wid)
+		hsync_wid = 1;
+	hsync_start = mode->crtc_hsync_start - 8;
+
+	fp_h_sync_strt_wid = ((hsync_start & 0x1fff)
+			      | ((hsync_wid & 0x3f) << 16)
+			      | ((mode->flags & DRM_MODE_FLAG_NHSYNC)
+				 ? RADEON_CRTC_H_SYNC_POL
+				 : 0));
+
+	fp_crtc_v_total_disp = (((mode->crtc_vtotal - 1) & 0xffff)
+				| ((mode->crtc_vdisplay - 1) << 16));
+
+	vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start;
+	if (!vsync_wid)
+		vsync_wid = 1;
+
+	fp_v_sync_strt_wid = (((mode->crtc_vsync_start - 1) & 0xfff)
+			      | ((vsync_wid & 0x1f) << 16)
+			      | ((mode->flags & DRM_MODE_FLAG_NVSYNC)
+				 ? RADEON_CRTC_V_SYNC_POL
+				 : 0));
+
+	fp_horz_vert_active = 0;
+
+	if (native_mode->panel_xres == 0 ||
+	    native_mode->panel_yres == 0) {
+		hscale = false;
+		vscale = false;
+	} else {
+		if (xres > native_mode->panel_xres)
+			xres = native_mode->panel_xres;
+		if (yres > native_mode->panel_yres)
+			yres = native_mode->panel_yres;
+
+		if (xres == native_mode->panel_xres)
+			hscale = false;
+		if (yres == native_mode->panel_yres)
+			vscale = false;
+	}
+
+	switch (radeon_crtc->rmx_type) {
+	case RMX_FULL:
+	case RMX_ASPECT:
+		if (!hscale)
+			fp_horz_stretch |= ((xres/8-1) << 16);
+		else {
+			inc = (fp_horz_stretch & RADEON_HORZ_AUTO_RATIO_INC) ? 1 : 0;
+			scale = ((xres + inc) * RADEON_HORZ_STRETCH_RATIO_MAX)
+				/ native_mode->panel_xres + 1;
+			fp_horz_stretch |= (((scale) & RADEON_HORZ_STRETCH_RATIO_MASK) |
+					RADEON_HORZ_STRETCH_BLEND |
+					RADEON_HORZ_STRETCH_ENABLE |
+					((native_mode->panel_xres/8-1) << 16));
+		}
+
+		if (!vscale)
+			fp_vert_stretch |= ((yres-1) << 12);
+		else {
+			inc = (fp_vert_stretch & RADEON_VERT_AUTO_RATIO_INC) ? 1 : 0;
+			scale = ((yres + inc) * RADEON_VERT_STRETCH_RATIO_MAX)
+				/ native_mode->panel_yres + 1;
+			fp_vert_stretch |= (((scale) & RADEON_VERT_STRETCH_RATIO_MASK) |
+					RADEON_VERT_STRETCH_ENABLE |
+					RADEON_VERT_STRETCH_BLEND |
+					((native_mode->panel_yres-1) << 12));
+		}
+		break;
+	case RMX_CENTER:
+		fp_horz_stretch |= ((xres/8-1) << 16);
+		fp_vert_stretch |= ((yres-1) << 12);
+
+		crtc_more_cntl |= (RADEON_CRTC_AUTO_HORZ_CENTER_EN |
+				RADEON_CRTC_AUTO_VERT_CENTER_EN);
+
+		blank_width = (mode->crtc_hblank_end - mode->crtc_hblank_start) / 8;
+		if (blank_width > 110)
+			blank_width = 110;
+
+		fp_crtc_h_total_disp = (((blank_width) & 0x3ff)
+				| ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16));
+
+		hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8;
+		if (!hsync_wid)
+			hsync_wid = 1;
+
+		fp_h_sync_strt_wid = ((((mode->crtc_hsync_start - mode->crtc_hblank_start) / 8) & 0x1fff)
+				| ((hsync_wid & 0x3f) << 16)
+				| ((mode->flags & DRM_MODE_FLAG_NHSYNC)
+					? RADEON_CRTC_H_SYNC_POL
+					: 0));
+
+		fp_crtc_v_total_disp = (((mode->crtc_vblank_end - mode->crtc_vblank_start) & 0xffff)
+				| ((mode->crtc_vdisplay - 1) << 16));
+
+		vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start;
+		if (!vsync_wid)
+			vsync_wid = 1;
+
+		fp_v_sync_strt_wid = ((((mode->crtc_vsync_start - mode->crtc_vblank_start) & 0xfff)
+					| ((vsync_wid & 0x1f) << 16)
+					| ((mode->flags & DRM_MODE_FLAG_NVSYNC)
+						? RADEON_CRTC_V_SYNC_POL
+						: 0)));
+
+		fp_horz_vert_active = (((native_mode->panel_yres) & 0xfff) |
+				(((native_mode->panel_xres / 8) & 0x1ff) << 16));
+		break;
+	case RMX_OFF:
+	default:
+		fp_horz_stretch |= ((xres/8-1) << 16);
+		fp_vert_stretch |= ((yres-1) << 12);
+		break;
+	}
+
+	WREG32(RADEON_FP_HORZ_STRETCH,      fp_horz_stretch);
+	WREG32(RADEON_FP_VERT_STRETCH,      fp_vert_stretch);
+	WREG32(RADEON_CRTC_MORE_CNTL,       crtc_more_cntl);
+	WREG32(RADEON_FP_HORZ_VERT_ACTIVE,  fp_horz_vert_active);
+	WREG32(RADEON_FP_H_SYNC_STRT_WID,   fp_h_sync_strt_wid);
+	WREG32(RADEON_FP_V_SYNC_STRT_WID,   fp_v_sync_strt_wid);
+	WREG32(RADEON_FP_CRTC_H_TOTAL_DISP, fp_crtc_h_total_disp);
+	WREG32(RADEON_FP_CRTC_V_TOTAL_DISP, fp_crtc_v_total_disp);
+}
+
 void radeon_restore_common_regs(struct drm_device *dev)
 {
 	/* don't need this yet */
@@ -235,6 +400,7 @@ int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y,
 	uint64_t base;
 	uint32_t crtc_offset, crtc_offset_cntl, crtc_tile_x0_y0 = 0;
 	uint32_t crtc_pitch, pitch_pixels;
+	uint32_t tiling_flags;
 
 	DRM_DEBUG("\n");
 
@@ -244,7 +410,12 @@ int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y,
 	if (radeon_gem_object_pin(obj, RADEON_GEM_DOMAIN_VRAM, &base)) {
 		return -EINVAL;
 	}
-	crtc_offset = (u32)base;
+	/* if scanout was in GTT this really wouldn't work */
+	/* crtc offset is from display base addr not FB location */
+	radeon_crtc->legacy_display_base_addr = rdev->mc.vram_location;
+
+	base -= radeon_crtc->legacy_display_base_addr;
+
 	crtc_offset_cntl = 0;
 
 	pitch_pixels = crtc->fb->pitch / (crtc->fb->bits_per_pixel / 8);
@@ -253,8 +424,12 @@ int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y,
 		       (crtc->fb->bits_per_pixel * 8));
 	crtc_pitch |= crtc_pitch << 16;
 
-	/* TODO tiling */
-	if (0) {
+	radeon_object_get_tiling_flags(obj->driver_private,
+				       &tiling_flags, NULL);
+	if (tiling_flags & RADEON_TILING_MICRO)
+		DRM_ERROR("trying to scanout microtiled buffer\n");
+
+	if (tiling_flags & RADEON_TILING_MACRO) {
 		if (ASIC_IS_R300(rdev))
 			crtc_offset_cntl |= (R300_CRTC_X_Y_MODE_EN |
 					     R300_CRTC_MICRO_TILE_BUFFER_DIS |
@@ -270,15 +445,13 @@ int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y,
 			crtc_offset_cntl &= ~RADEON_CRTC_TILE_EN;
 	}
 
-
-	/* TODO more tiling */
-	if (0) {
+	if (tiling_flags & RADEON_TILING_MACRO) {
 		if (ASIC_IS_R300(rdev)) {
 			crtc_tile_x0_y0 = x | (y << 16);
 			base &= ~0x7ff;
 		} else {
 			int byteshift = crtc->fb->bits_per_pixel >> 4;
-			int tile_addr = (((y >> 3) * crtc->fb->width + x) >> (8 - byteshift)) << 11;
+			int tile_addr = (((y >> 3) * pitch_pixels +  x) >> (8 - byteshift)) << 11;
 			base += tile_addr + ((x << byteshift) % 256) + ((y % 8) << 8);
 			crtc_offset_cntl |= (y % 16);
 		}
@@ -303,11 +476,9 @@ int radeon_crtc_set_base(struct drm_crtc *crtc, int x, int y,
 
 	base &= ~7;
 
-	/* update sarea TODO */
-
 	crtc_offset = (u32)base;
 
-	WREG32(RADEON_DISPLAY_BASE_ADDR + radeon_crtc->crtc_offset, rdev->mc.vram_location);
+	WREG32(RADEON_DISPLAY_BASE_ADDR + radeon_crtc->crtc_offset, radeon_crtc->legacy_display_base_addr);
 
 	if (ASIC_IS_R300(rdev)) {
 		if (radeon_crtc->crtc_id)
@@ -751,6 +922,8 @@ static bool radeon_crtc_mode_fixup(struct drm_crtc *crtc,
 				   struct drm_display_mode *mode,
 				   struct drm_display_mode *adjusted_mode)
 {
+	if (!radeon_crtc_scaling_mode_fixup(crtc, mode, adjusted_mode))
+		return false;
 	return true;
 }
 
@@ -759,16 +932,25 @@ static int radeon_crtc_mode_set(struct drm_crtc *crtc,
 				 struct drm_display_mode *adjusted_mode,
 				 int x, int y, struct drm_framebuffer *old_fb)
 {
-
-	DRM_DEBUG("\n");
+	struct radeon_crtc *radeon_crtc = to_radeon_crtc(crtc);
+	struct drm_device *dev = crtc->dev;
+	struct radeon_device *rdev = dev->dev_private;
 
 	/* TODO TV */
-
 	radeon_crtc_set_base(crtc, x, y, old_fb);
 	radeon_set_crtc_timing(crtc, adjusted_mode);
 	radeon_set_pll(crtc, adjusted_mode);
-	radeon_init_disp_bandwidth(crtc->dev);
-
+	radeon_bandwidth_update(rdev);
+	if (radeon_crtc->crtc_id == 0) {
+		radeon_legacy_rmx_mode_set(crtc, mode, adjusted_mode);
+	} else {
+		if (radeon_crtc->rmx_type != RMX_OFF) {
+			/* FIXME: only first crtc has rmx what should we
+			 * do ?
+			 */
+			DRM_ERROR("Mode need scaling but only first crtc can do that.\n");
+		}
+	}
 	return 0;
 }
 
@@ -799,478 +981,3 @@ void radeon_legacy_init_crtc(struct drm_device *dev,
 		radeon_crtc->crtc_offset = RADEON_CRTC2_H_TOTAL_DISP - RADEON_CRTC_H_TOTAL_DISP;
 	drm_crtc_helper_add(&radeon_crtc->base, &legacy_helper_funcs);
 }
-
-void radeon_init_disp_bw_legacy(struct drm_device *dev,
-				struct drm_display_mode *mode1,
-				uint32_t pixel_bytes1,
-				struct drm_display_mode *mode2,
-				uint32_t pixel_bytes2)
-{
-	struct radeon_device *rdev = dev->dev_private;
-	fixed20_12 trcd_ff, trp_ff, tras_ff, trbs_ff, tcas_ff;
-	fixed20_12 sclk_ff, mclk_ff, sclk_eff_ff, sclk_delay_ff;
-	fixed20_12 peak_disp_bw, mem_bw, pix_clk, pix_clk2, temp_ff, crit_point_ff;
-	uint32_t temp, data, mem_trcd, mem_trp, mem_tras;
-	fixed20_12 memtcas_ff[8] = {
-		fixed_init(1),
-		fixed_init(2),
-		fixed_init(3),
-		fixed_init(0),
-		fixed_init_half(1),
-		fixed_init_half(2),
-		fixed_init(0),
-	};
-	fixed20_12 memtcas_rs480_ff[8] = {
-		fixed_init(0),
-		fixed_init(1),
-		fixed_init(2),
-		fixed_init(3),
-		fixed_init(0),
-		fixed_init_half(1),
-		fixed_init_half(2),
-		fixed_init_half(3),
-	};
-	fixed20_12 memtcas2_ff[8] = {
-		fixed_init(0),
-		fixed_init(1),
-		fixed_init(2),
-		fixed_init(3),
-		fixed_init(4),
-		fixed_init(5),
-		fixed_init(6),
-		fixed_init(7),
-	};
-	fixed20_12 memtrbs[8] = {
-		fixed_init(1),
-		fixed_init_half(1),
-		fixed_init(2),
-		fixed_init_half(2),
-		fixed_init(3),
-		fixed_init_half(3),
-		fixed_init(4),
-		fixed_init_half(4)
-	};
-	fixed20_12 memtrbs_r4xx[8] = {
-		fixed_init(4),
-		fixed_init(5),
-		fixed_init(6),
-		fixed_init(7),
-		fixed_init(8),
-		fixed_init(9),
-		fixed_init(10),
-		fixed_init(11)
-	};
-	fixed20_12 min_mem_eff;
-	fixed20_12 mc_latency_sclk, mc_latency_mclk, k1;
-	fixed20_12 cur_latency_mclk, cur_latency_sclk;
-	fixed20_12 disp_latency, disp_latency_overhead, disp_drain_rate,
-		disp_drain_rate2, read_return_rate;
-	fixed20_12 time_disp1_drop_priority;
-	int c;
-	int cur_size = 16;       /* in octawords */
-	int critical_point = 0, critical_point2;
-/* 	uint32_t read_return_rate, time_disp1_drop_priority; */
-	int stop_req, max_stop_req;
-
-	min_mem_eff.full = rfixed_const_8(0);
-	/* get modes */
-	if ((rdev->disp_priority == 2) && ASIC_IS_R300(rdev)) {
-		uint32_t mc_init_misc_lat_timer = RREG32(R300_MC_INIT_MISC_LAT_TIMER);
-		mc_init_misc_lat_timer &= ~(R300_MC_DISP1R_INIT_LAT_MASK << R300_MC_DISP1R_INIT_LAT_SHIFT);
-		mc_init_misc_lat_timer &= ~(R300_MC_DISP0R_INIT_LAT_MASK << R300_MC_DISP0R_INIT_LAT_SHIFT);
-		/* check crtc enables */
-		if (mode2)
-			mc_init_misc_lat_timer |= (1 << R300_MC_DISP1R_INIT_LAT_SHIFT);
-		if (mode1)
-			mc_init_misc_lat_timer |= (1 << R300_MC_DISP0R_INIT_LAT_SHIFT);
-		WREG32(R300_MC_INIT_MISC_LAT_TIMER, mc_init_misc_lat_timer);
-	}
-
-	/*
-	 * determine is there is enough bw for current mode
-	 */
-	mclk_ff.full = rfixed_const(rdev->clock.default_mclk);
-	temp_ff.full = rfixed_const(100);
-	mclk_ff.full = rfixed_div(mclk_ff, temp_ff);
-	sclk_ff.full = rfixed_const(rdev->clock.default_sclk);
-	sclk_ff.full = rfixed_div(sclk_ff, temp_ff);
-
-	temp = (rdev->mc.vram_width / 8) * (rdev->mc.vram_is_ddr ? 2 : 1);
-	temp_ff.full = rfixed_const(temp);
-	mem_bw.full = rfixed_mul(mclk_ff, temp_ff);
-
-	pix_clk.full = 0;
-	pix_clk2.full = 0;
-	peak_disp_bw.full = 0;
-	if (mode1) {
-		temp_ff.full = rfixed_const(1000);
-		pix_clk.full = rfixed_const(mode1->clock); /* convert to fixed point */
-		pix_clk.full = rfixed_div(pix_clk, temp_ff);
-		temp_ff.full = rfixed_const(pixel_bytes1);
-		peak_disp_bw.full += rfixed_mul(pix_clk, temp_ff);
-	}
-	if (mode2) {
-		temp_ff.full = rfixed_const(1000);
-		pix_clk2.full = rfixed_const(mode2->clock); /* convert to fixed point */
-		pix_clk2.full = rfixed_div(pix_clk2, temp_ff);
-		temp_ff.full = rfixed_const(pixel_bytes2);
-		peak_disp_bw.full += rfixed_mul(pix_clk2, temp_ff);
-	}
-
-	mem_bw.full = rfixed_mul(mem_bw, min_mem_eff);
-	if (peak_disp_bw.full >= mem_bw.full) {
-		DRM_ERROR("You may not have enough display bandwidth for current mode\n"
-			  "If you have flickering problem, try to lower resolution, refresh rate, or color depth\n");
-	}
-
-	/*  Get values from the EXT_MEM_CNTL register...converting its contents. */
-	temp = RREG32(RADEON_MEM_TIMING_CNTL);
-	if ((rdev->family == CHIP_RV100) || (rdev->flags & RADEON_IS_IGP)) { /* RV100, M6, IGPs */
-		mem_trcd = ((temp >> 2) & 0x3) + 1;
-		mem_trp  = ((temp & 0x3)) + 1;
-		mem_tras = ((temp & 0x70) >> 4) + 1;
-	} else if (rdev->family == CHIP_R300 ||
-		   rdev->family == CHIP_R350) { /* r300, r350 */
-		mem_trcd = (temp & 0x7) + 1;
-		mem_trp = ((temp >> 8) & 0x7) + 1;
-		mem_tras = ((temp >> 11) & 0xf) + 4;
-	} else if (rdev->family == CHIP_RV350 ||
-		   rdev->family <= CHIP_RV380) {
-		/* rv3x0 */
-		mem_trcd = (temp & 0x7) + 3;
-		mem_trp = ((temp >> 8) & 0x7) + 3;
-		mem_tras = ((temp >> 11) & 0xf) + 6;
-	} else if (rdev->family == CHIP_R420 ||
-		   rdev->family == CHIP_R423 ||
-		   rdev->family == CHIP_RV410) {
-		/* r4xx */
-		mem_trcd = (temp & 0xf) + 3;
-		if (mem_trcd > 15)
-			mem_trcd = 15;
-		mem_trp = ((temp >> 8) & 0xf) + 3;
-		if (mem_trp > 15)
-			mem_trp = 15;
-		mem_tras = ((temp >> 12) & 0x1f) + 6;
-		if (mem_tras > 31)
-			mem_tras = 31;
-	} else { /* RV200, R200 */
-		mem_trcd = (temp & 0x7) + 1;
-		mem_trp = ((temp >> 8) & 0x7) + 1;
-		mem_tras = ((temp >> 12) & 0xf) + 4;
-	}
-	/* convert to FF */
-	trcd_ff.full = rfixed_const(mem_trcd);
-	trp_ff.full = rfixed_const(mem_trp);
-	tras_ff.full = rfixed_const(mem_tras);
-
-	/* Get values from the MEM_SDRAM_MODE_REG register...converting its */
-	temp = RREG32(RADEON_MEM_SDRAM_MODE_REG);
-	data = (temp & (7 << 20)) >> 20;
-	if ((rdev->family == CHIP_RV100) || rdev->flags & RADEON_IS_IGP) {
-		if (rdev->family == CHIP_RS480) /* don't think rs400 */
-			tcas_ff = memtcas_rs480_ff[data];
-		else
-			tcas_ff = memtcas_ff[data];
-	} else
-		tcas_ff = memtcas2_ff[data];
-
-	if (rdev->family == CHIP_RS400 ||
-	    rdev->family == CHIP_RS480) {
-		/* extra cas latency stored in bits 23-25 0-4 clocks */
-		data = (temp >> 23) & 0x7;
-		if (data < 5)
-			tcas_ff.full += rfixed_const(data);
-	}
-
-	if (ASIC_IS_R300(rdev) && !(rdev->flags & RADEON_IS_IGP)) {
-		/* on the R300, Tcas is included in Trbs.
-		 */
-		temp = RREG32(RADEON_MEM_CNTL);
-		data = (R300_MEM_NUM_CHANNELS_MASK & temp);
-		if (data == 1) {
-			if (R300_MEM_USE_CD_CH_ONLY & temp) {
-				temp = RREG32(R300_MC_IND_INDEX);
-				temp &= ~R300_MC_IND_ADDR_MASK;
-				temp |= R300_MC_READ_CNTL_CD_mcind;
-				WREG32(R300_MC_IND_INDEX, temp);
-				temp = RREG32(R300_MC_IND_DATA);
-				data = (R300_MEM_RBS_POSITION_C_MASK & temp);
-			} else {
-				temp = RREG32(R300_MC_READ_CNTL_AB);
-				data = (R300_MEM_RBS_POSITION_A_MASK & temp);
-			}
-		} else {
-			temp = RREG32(R300_MC_READ_CNTL_AB);
-			data = (R300_MEM_RBS_POSITION_A_MASK & temp);
-		}
-		if (rdev->family == CHIP_RV410 ||
-		    rdev->family == CHIP_R420 ||
-		    rdev->family == CHIP_R423)
-			trbs_ff = memtrbs_r4xx[data];
-		else
-			trbs_ff = memtrbs[data];
-		tcas_ff.full += trbs_ff.full;
-	}
-
-	sclk_eff_ff.full = sclk_ff.full;
-
-	if (rdev->flags & RADEON_IS_AGP) {
-		fixed20_12 agpmode_ff;
-		agpmode_ff.full = rfixed_const(radeon_agpmode);
-		temp_ff.full = rfixed_const_666(16);
-		sclk_eff_ff.full -= rfixed_mul(agpmode_ff, temp_ff);
-	}
-	/* TODO PCIE lanes may affect this - agpmode == 16?? */
-
-	if (ASIC_IS_R300(rdev)) {
-		sclk_delay_ff.full = rfixed_const(250);
-	} else {
-		if ((rdev->family == CHIP_RV100) ||
-		    rdev->flags & RADEON_IS_IGP) {
-			if (rdev->mc.vram_is_ddr)
-				sclk_delay_ff.full = rfixed_const(41);
-			else
-				sclk_delay_ff.full = rfixed_const(33);
-		} else {
-			if (rdev->mc.vram_width == 128)
-				sclk_delay_ff.full = rfixed_const(57);
-			else
-				sclk_delay_ff.full = rfixed_const(41);
-		}
-	}
-
-	mc_latency_sclk.full = rfixed_div(sclk_delay_ff, sclk_eff_ff);
-
-	if (rdev->mc.vram_is_ddr) {
-		if (rdev->mc.vram_width == 32) {
-			k1.full = rfixed_const(40);
-			c  = 3;
-		} else {
-			k1.full = rfixed_const(20);
-			c  = 1;
-		}
-	} else {
-		k1.full = rfixed_const(40);
-		c  = 3;
-	}
-
-	temp_ff.full = rfixed_const(2);
-	mc_latency_mclk.full = rfixed_mul(trcd_ff, temp_ff);
-	temp_ff.full = rfixed_const(c);
-	mc_latency_mclk.full += rfixed_mul(tcas_ff, temp_ff);
-	temp_ff.full = rfixed_const(4);
-	mc_latency_mclk.full += rfixed_mul(tras_ff, temp_ff);
-	mc_latency_mclk.full += rfixed_mul(trp_ff, temp_ff);
-	mc_latency_mclk.full += k1.full;
-
-	mc_latency_mclk.full = rfixed_div(mc_latency_mclk, mclk_ff);
-	mc_latency_mclk.full += rfixed_div(temp_ff, sclk_eff_ff);
-
-	/*
-	  HW cursor time assuming worst case of full size colour cursor.
-	*/
-	temp_ff.full = rfixed_const((2 * (cur_size - (rdev->mc.vram_is_ddr + 1))));
-	temp_ff.full += trcd_ff.full;
-	if (temp_ff.full < tras_ff.full)
-		temp_ff.full = tras_ff.full;
-	cur_latency_mclk.full = rfixed_div(temp_ff, mclk_ff);
-
-	temp_ff.full = rfixed_const(cur_size);
-	cur_latency_sclk.full = rfixed_div(temp_ff, sclk_eff_ff);
-	/*
-	  Find the total latency for the display data.
-	*/
-	disp_latency_overhead.full = rfixed_const(80);
-	disp_latency_overhead.full = rfixed_div(disp_latency_overhead, sclk_ff);
-	mc_latency_mclk.full += disp_latency_overhead.full + cur_latency_mclk.full;
-	mc_latency_sclk.full += disp_latency_overhead.full + cur_latency_sclk.full;
-
-	if (mc_latency_mclk.full > mc_latency_sclk.full)
-		disp_latency.full = mc_latency_mclk.full;
-	else
-		disp_latency.full = mc_latency_sclk.full;
-
-	/* setup Max GRPH_STOP_REQ default value */
-	if (ASIC_IS_RV100(rdev))
-		max_stop_req = 0x5c;
-	else
-		max_stop_req = 0x7c;
-
-	if (mode1) {
-		/*  CRTC1
-		    Set GRPH_BUFFER_CNTL register using h/w defined optimal values.
-		    GRPH_STOP_REQ <= MIN[ 0x7C, (CRTC_H_DISP + 1) * (bit depth) / 0x10 ]
-		*/
-		stop_req = mode1->hdisplay * pixel_bytes1 / 16;
-
-		if (stop_req > max_stop_req)
-			stop_req = max_stop_req;
-
-		/*
-		  Find the drain rate of the display buffer.
-		*/
-		temp_ff.full = rfixed_const((16/pixel_bytes1));
-		disp_drain_rate.full = rfixed_div(pix_clk, temp_ff);
-
-		/*
-		  Find the critical point of the display buffer.
-		*/
-		crit_point_ff.full = rfixed_mul(disp_drain_rate, disp_latency);
-		crit_point_ff.full += rfixed_const_half(0);
-
-		critical_point = rfixed_trunc(crit_point_ff);
-
-		if (rdev->disp_priority == 2) {
-			critical_point = 0;
-		}
-
-		/*
-		  The critical point should never be above max_stop_req-4.  Setting
-		  GRPH_CRITICAL_CNTL = 0 will thus force high priority all the time.
-		*/
-		if (max_stop_req - critical_point < 4)
-			critical_point = 0;
-
-		if (critical_point == 0 && mode2 && rdev->family == CHIP_R300) {
-			/* some R300 cards have problem with this set to 0, when CRTC2 is enabled.*/
-			critical_point = 0x10;
-		}
-
-		temp = RREG32(RADEON_GRPH_BUFFER_CNTL);
-		temp &= ~(RADEON_GRPH_STOP_REQ_MASK);
-		temp |= (stop_req << RADEON_GRPH_STOP_REQ_SHIFT);
-		temp &= ~(RADEON_GRPH_START_REQ_MASK);
-		if ((rdev->family == CHIP_R350) &&
-		    (stop_req > 0x15)) {
-			stop_req -= 0x10;
-		}
-		temp |= (stop_req << RADEON_GRPH_START_REQ_SHIFT);
-		temp |= RADEON_GRPH_BUFFER_SIZE;
-		temp &= ~(RADEON_GRPH_CRITICAL_CNTL   |
-			  RADEON_GRPH_CRITICAL_AT_SOF |
-			  RADEON_GRPH_STOP_CNTL);
-		/*
-		  Write the result into the register.
-		*/
-		WREG32(RADEON_GRPH_BUFFER_CNTL, ((temp & ~RADEON_GRPH_CRITICAL_POINT_MASK) |
-						       (critical_point << RADEON_GRPH_CRITICAL_POINT_SHIFT)));
-
-#if 0
-		if ((rdev->family == CHIP_RS400) ||
-		    (rdev->family == CHIP_RS480)) {
-			/* attempt to program RS400 disp regs correctly ??? */
-			temp = RREG32(RS400_DISP1_REG_CNTL);
-			temp &= ~(RS400_DISP1_START_REQ_LEVEL_MASK |
-				  RS400_DISP1_STOP_REQ_LEVEL_MASK);
-			WREG32(RS400_DISP1_REQ_CNTL1, (temp |
-						       (critical_point << RS400_DISP1_START_REQ_LEVEL_SHIFT) |
-						       (critical_point << RS400_DISP1_STOP_REQ_LEVEL_SHIFT)));
-			temp = RREG32(RS400_DMIF_MEM_CNTL1);
-			temp &= ~(RS400_DISP1_CRITICAL_POINT_START_MASK |
-				  RS400_DISP1_CRITICAL_POINT_STOP_MASK);
-			WREG32(RS400_DMIF_MEM_CNTL1, (temp |
-						      (critical_point << RS400_DISP1_CRITICAL_POINT_START_SHIFT) |
-						      (critical_point << RS400_DISP1_CRITICAL_POINT_STOP_SHIFT)));
-		}
-#endif
-
-		DRM_DEBUG("GRPH_BUFFER_CNTL from to %x\n",
-			  /* 	  (unsigned int)info->SavedReg->grph_buffer_cntl, */
-			  (unsigned int)RREG32(RADEON_GRPH_BUFFER_CNTL));
-	}
-
-	if (mode2) {
-		u32 grph2_cntl;
-		stop_req = mode2->hdisplay * pixel_bytes2 / 16;
-
-		if (stop_req > max_stop_req)
-			stop_req = max_stop_req;
-
-		/*
-		  Find the drain rate of the display buffer.
-		*/
-		temp_ff.full = rfixed_const((16/pixel_bytes2));
-		disp_drain_rate2.full = rfixed_div(pix_clk2, temp_ff);
-
-		grph2_cntl = RREG32(RADEON_GRPH2_BUFFER_CNTL);
-		grph2_cntl &= ~(RADEON_GRPH_STOP_REQ_MASK);
-		grph2_cntl |= (stop_req << RADEON_GRPH_STOP_REQ_SHIFT);
-		grph2_cntl &= ~(RADEON_GRPH_START_REQ_MASK);
-		if ((rdev->family == CHIP_R350) &&
-		    (stop_req > 0x15)) {
-			stop_req -= 0x10;
-		}
-		grph2_cntl |= (stop_req << RADEON_GRPH_START_REQ_SHIFT);
-		grph2_cntl |= RADEON_GRPH_BUFFER_SIZE;
-		grph2_cntl &= ~(RADEON_GRPH_CRITICAL_CNTL   |
-			  RADEON_GRPH_CRITICAL_AT_SOF |
-			  RADEON_GRPH_STOP_CNTL);
-
-		if ((rdev->family == CHIP_RS100) ||
-		    (rdev->family == CHIP_RS200))
-			critical_point2 = 0;
-		else {
-			temp = (rdev->mc.vram_width * rdev->mc.vram_is_ddr + 1)/128;
-			temp_ff.full = rfixed_const(temp);
-			temp_ff.full = rfixed_mul(mclk_ff, temp_ff);
-			if (sclk_ff.full < temp_ff.full)
-				temp_ff.full = sclk_ff.full;
-
-			read_return_rate.full = temp_ff.full;
-
-			if (mode1) {
-				temp_ff.full = read_return_rate.full - disp_drain_rate.full;
-				time_disp1_drop_priority.full = rfixed_div(crit_point_ff, temp_ff);
-			} else {
-				time_disp1_drop_priority.full = 0;
-			}
-			crit_point_ff.full = disp_latency.full + time_disp1_drop_priority.full + disp_latency.full;
-			crit_point_ff.full = rfixed_mul(crit_point_ff, disp_drain_rate2);
-			crit_point_ff.full += rfixed_const_half(0);
-
-			critical_point2 = rfixed_trunc(crit_point_ff);
-
-			if (rdev->disp_priority == 2) {
-				critical_point2 = 0;
-			}
-
-			if (max_stop_req - critical_point2 < 4)
-				critical_point2 = 0;
-
-		}
-
-		if (critical_point2 == 0 && rdev->family == CHIP_R300) {
-			/* some R300 cards have problem with this set to 0 */
-			critical_point2 = 0x10;
-		}
-
-		WREG32(RADEON_GRPH2_BUFFER_CNTL, ((grph2_cntl & ~RADEON_GRPH_CRITICAL_POINT_MASK) |
-						  (critical_point2 << RADEON_GRPH_CRITICAL_POINT_SHIFT)));
-
-		if ((rdev->family == CHIP_RS400) ||
-		    (rdev->family == CHIP_RS480)) {
-#if 0
-			/* attempt to program RS400 disp2 regs correctly ??? */
-			temp = RREG32(RS400_DISP2_REQ_CNTL1);
-			temp &= ~(RS400_DISP2_START_REQ_LEVEL_MASK |
-				  RS400_DISP2_STOP_REQ_LEVEL_MASK);
-			WREG32(RS400_DISP2_REQ_CNTL1, (temp |
-						       (critical_point2 << RS400_DISP1_START_REQ_LEVEL_SHIFT) |
-						       (critical_point2 << RS400_DISP1_STOP_REQ_LEVEL_SHIFT)));
-			temp = RREG32(RS400_DISP2_REQ_CNTL2);
-			temp &= ~(RS400_DISP2_CRITICAL_POINT_START_MASK |
-				  RS400_DISP2_CRITICAL_POINT_STOP_MASK);
-			WREG32(RS400_DISP2_REQ_CNTL2, (temp |
-						       (critical_point2 << RS400_DISP2_CRITICAL_POINT_START_SHIFT) |
-						       (critical_point2 << RS400_DISP2_CRITICAL_POINT_STOP_SHIFT)));
-#endif
-			WREG32(RS400_DISP2_REQ_CNTL1, 0x105DC1CC);
-			WREG32(RS400_DISP2_REQ_CNTL2, 0x2749D000);
-			WREG32(RS400_DMIF_MEM_CNTL1,  0x29CA71DC);
-			WREG32(RS400_DISP1_REQ_CNTL1, 0x28FBC3AC);
-		}
-
-		DRM_DEBUG("GRPH2_BUFFER_CNTL from to %x\n",
-			  (unsigned int)RREG32(RADEON_GRPH2_BUFFER_CNTL));
-	}
-}
diff --git a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
index 2c2f42d..34d0f58 100644
--- a/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
+++ b/drivers/gpu/drm/radeon/radeon_legacy_encoders.c
@@ -30,170 +30,6 @@
 #include "atom.h"
 
 
-static void radeon_legacy_rmx_mode_set(struct drm_encoder *encoder,
-				       struct drm_display_mode *mode,
-				       struct drm_display_mode *adjusted_mode)
-{
-	struct drm_device *dev = encoder->dev;
-	struct radeon_device *rdev = dev->dev_private;
-	struct radeon_encoder *radeon_encoder = to_radeon_encoder(encoder);
-	int    xres = mode->hdisplay;
-	int    yres = mode->vdisplay;
-	bool   hscale = true, vscale = true;
-	int    hsync_wid;
-	int    vsync_wid;
-	int    hsync_start;
-	uint32_t scale, inc;
-	uint32_t fp_horz_stretch, fp_vert_stretch, crtc_more_cntl, fp_horz_vert_active;
-	uint32_t fp_h_sync_strt_wid, fp_v_sync_strt_wid, fp_crtc_h_total_disp, fp_crtc_v_total_disp;
-	struct radeon_native_mode *native_mode = &radeon_encoder->native_mode;
-
-	DRM_DEBUG("\n");
-
-	fp_vert_stretch = RREG32(RADEON_FP_VERT_STRETCH) &
-		(RADEON_VERT_STRETCH_RESERVED |
-		 RADEON_VERT_AUTO_RATIO_INC);
-	fp_horz_stretch = RREG32(RADEON_FP_HORZ_STRETCH) &
-		(RADEON_HORZ_FP_LOOP_STRETCH |
-		 RADEON_HORZ_AUTO_RATIO_INC);
-
-	crtc_more_cntl = 0;
-	if ((rdev->family == CHIP_RS100) ||
-	    (rdev->family == CHIP_RS200)) {
-		/* This is to workaround the asic bug for RMX, some versions
-		   of BIOS dosen't have this register initialized correctly. */
-		crtc_more_cntl |= RADEON_CRTC_H_CUTOFF_ACTIVE_EN;
-	}
-
-
-	fp_crtc_h_total_disp = ((((mode->crtc_htotal / 8) - 1) & 0x3ff)
-				| ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16));
-
-	hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8;
-	if (!hsync_wid)
-		hsync_wid = 1;
-	hsync_start = mode->crtc_hsync_start - 8;
-
-	fp_h_sync_strt_wid = ((hsync_start & 0x1fff)
-			      | ((hsync_wid & 0x3f) << 16)
-			      | ((mode->flags & DRM_MODE_FLAG_NHSYNC)
-				 ? RADEON_CRTC_H_SYNC_POL
-				 : 0));
-
-	fp_crtc_v_total_disp = (((mode->crtc_vtotal - 1) & 0xffff)
-				| ((mode->crtc_vdisplay - 1) << 16));
-
-	vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start;
-	if (!vsync_wid)
-		vsync_wid = 1;
-
-	fp_v_sync_strt_wid = (((mode->crtc_vsync_start - 1) & 0xfff)
-			      | ((vsync_wid & 0x1f) << 16)
-			      | ((mode->flags & DRM_MODE_FLAG_NVSYNC)
-				 ? RADEON_CRTC_V_SYNC_POL
-				 : 0));
-
-	fp_horz_vert_active = 0;
-
-	if (native_mode->panel_xres == 0 ||
-	    native_mode->panel_yres == 0) {
-		hscale = false;
-		vscale = false;
-	} else {
-		if (xres > native_mode->panel_xres)
-			xres = native_mode->panel_xres;
-		if (yres > native_mode->panel_yres)
-			yres = native_mode->panel_yres;
-
-		if (xres == native_mode->panel_xres)
-			hscale = false;
-		if (yres == native_mode->panel_yres)
-			vscale = false;
-	}
-
-	if (radeon_encoder->flags & RADEON_USE_RMX) {
-		if (radeon_encoder->rmx_type != RMX_CENTER) {
-			if (!hscale)
-				fp_horz_stretch |= ((xres/8-1) << 16);
-			else {
-				inc = (fp_horz_stretch & RADEON_HORZ_AUTO_RATIO_INC) ? 1 : 0;
-				scale = ((xres + inc) * RADEON_HORZ_STRETCH_RATIO_MAX)
-					/ native_mode->panel_xres + 1;
-				fp_horz_stretch |= (((scale) & RADEON_HORZ_STRETCH_RATIO_MASK) |
-						    RADEON_HORZ_STRETCH_BLEND |
-						    RADEON_HORZ_STRETCH_ENABLE |
-						    ((native_mode->panel_xres/8-1) << 16));
-			}
-
-			if (!vscale)
-				fp_vert_stretch |= ((yres-1) << 12);
-			else {
-				inc = (fp_vert_stretch & RADEON_VERT_AUTO_RATIO_INC) ? 1 : 0;
-				scale = ((yres + inc) * RADEON_VERT_STRETCH_RATIO_MAX)
-					/ native_mode->panel_yres + 1;
-				fp_vert_stretch |= (((scale) & RADEON_VERT_STRETCH_RATIO_MASK) |
-						    RADEON_VERT_STRETCH_ENABLE |
-						    RADEON_VERT_STRETCH_BLEND |
-						    ((native_mode->panel_yres-1) << 12));
-			}
-		} else if (radeon_encoder->rmx_type == RMX_CENTER) {
-			int    blank_width;
-
-			fp_horz_stretch |= ((xres/8-1) << 16);
-			fp_vert_stretch |= ((yres-1) << 12);
-
-			crtc_more_cntl |= (RADEON_CRTC_AUTO_HORZ_CENTER_EN |
-					   RADEON_CRTC_AUTO_VERT_CENTER_EN);
-
-			blank_width = (mode->crtc_hblank_end - mode->crtc_hblank_start) / 8;
-			if (blank_width > 110)
-				blank_width = 110;
-
-			fp_crtc_h_total_disp = (((blank_width) & 0x3ff)
-						| ((((mode->crtc_hdisplay / 8) - 1) & 0x1ff) << 16));
-
-			hsync_wid = (mode->crtc_hsync_end - mode->crtc_hsync_start) / 8;
-			if (!hsync_wid)
-				hsync_wid = 1;
-
-			fp_h_sync_strt_wid = ((((mode->crtc_hsync_start - mode->crtc_hblank_start) / 8) & 0x1fff)
-					      | ((hsync_wid & 0x3f) << 16)
-					      | ((mode->flags & DRM_MODE_FLAG_NHSYNC)
-						 ? RADEON_CRTC_H_SYNC_POL
-						 : 0));
-
-			fp_crtc_v_total_disp = (((mode->crtc_vblank_end - mode->crtc_vblank_start) & 0xffff)
-						| ((mode->crtc_vdisplay - 1) << 16));
-
-			vsync_wid = mode->crtc_vsync_end - mode->crtc_vsync_start;
-			if (!vsync_wid)
-				vsync_wid = 1;
-
-			fp_v_sync_strt_wid = ((((mode->crtc_vsync_start - mode->crtc_vblank_start) & 0xfff)
-					       | ((vsync_wid & 0x1f) << 16)
-					       | ((mode->flags & DRM_MODE_FLAG_NVSYNC)
-						  ? RADEON_CRTC_V_SYNC_POL
-						  : 0)));
-
-			fp_horz_vert_active = (((native_mode->panel_yres) & 0xfff) |
-					       (((native_mode->panel_xres / 8) & 0x1ff) << 16));
-		}
-	} else {
-		fp_horz_stretch |= ((xres/8-1) << 16);
-		fp_vert_stretch |= ((yres-1) << 12);
-	}
-
-	WREG32(RADEON_FP_HORZ_STRETCH,      fp_horz_stretch);
-	WREG32(RADEON_FP_VERT_STRETCH,      fp_vert_stretch);
-	WREG32(RADEON_CRTC_MORE_CNTL,       crtc_more_cntl);
-	WREG32(RADEON_FP_HORZ_VERT_ACTIVE,  fp_horz_vert_active);
-	WREG32(RADEON_FP_H_SYNC_STRT_WID,   fp_h_sync_strt_wid);
-	WREG32(RADEON_FP_V_SYNC_STRT_WID,   fp_v_sync_strt_wid);
-	WREG32(RADEON_FP_CRTC_H_TOTAL_DISP, fp_crtc_h_total_disp);
-	WREG32(RADEON_FP_CRTC_V_TOTAL_DISP, fp_crtc_v_total_disp);
-
-}
-
 static void radeon_legacy_lvds_dpms(struct drm_encoder *encoder, int mode)
 {
 	struct drm_device *dev = encoder->dev;
@@ -287,9 +123,6 @@ static void radeon_legacy_lvds_mode_set(struct drm_encoder *encoder,
 
 	DRM_DEBUG("\n");
 
-	if (radeon_crtc->crtc_id == 0)
-		radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
-
 	lvds_pll_cntl = RREG32(RADEON_LVDS_PLL_CNTL);
 	lvds_pll_cntl &= ~RADEON_LVDS_PLL_EN;
 
@@ -318,7 +151,7 @@ static void radeon_legacy_lvds_mode_set(struct drm_encoder *encoder,
 
 	if (radeon_crtc->crtc_id == 0) {
 		if (ASIC_IS_R300(rdev)) {
-			if (radeon_encoder->flags & RADEON_USE_RMX)
+			if (radeon_encoder->rmx_type != RMX_OFF)
 				lvds_pll_cntl |= R300_LVDS_SRC_SEL_RMX;
 		} else
 			lvds_gen_cntl &= ~RADEON_LVDS_SEL_CRTC2;
@@ -350,8 +183,6 @@ static bool radeon_legacy_lvds_mode_fixup(struct drm_encoder *encoder,
 
 	drm_mode_set_crtcinfo(adjusted_mode, 0);
 
-	radeon_encoder->flags &= ~RADEON_USE_RMX;
-
 	if (radeon_encoder->rmx_type != RMX_OFF)
 		radeon_rmx_mode_fixup(encoder, mode, adjusted_mode);
 
@@ -455,9 +286,6 @@ static void radeon_legacy_primary_dac_mode_set(struct drm_encoder *encoder,
 
 	DRM_DEBUG("\n");
 
-	if (radeon_crtc->crtc_id == 0)
-		radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
-
 	if (radeon_crtc->crtc_id == 0) {
 		if (rdev->family == CHIP_R200 || ASIC_IS_R300(rdev)) {
 			disp_output_cntl = RREG32(RADEON_DISP_OUTPUT_CNTL) &
@@ -653,9 +481,6 @@ static void radeon_legacy_tmds_int_mode_set(struct drm_encoder *encoder,
 
 	DRM_DEBUG("\n");
 
-	if (radeon_crtc->crtc_id == 0)
-		radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
-
 	tmp = tmds_pll_cntl = RREG32(RADEON_TMDS_PLL_CNTL);
 	tmp &= 0xfffff;
 	if (rdev->family == CHIP_RV280) {
@@ -711,7 +536,7 @@ static void radeon_legacy_tmds_int_mode_set(struct drm_encoder *encoder,
     if (radeon_crtc->crtc_id == 0) {
 	    if (ASIC_IS_R300(rdev) || rdev->family == CHIP_R200) {
 		    fp_gen_cntl &= ~R200_FP_SOURCE_SEL_MASK;
-		    if (radeon_encoder->flags & RADEON_USE_RMX)
+		    if (radeon_encoder->rmx_type != RMX_OFF)
 			    fp_gen_cntl |= R200_FP_SOURCE_SEL_RMX;
 		    else
 			    fp_gen_cntl |= R200_FP_SOURCE_SEL_CRTC1;
@@ -820,9 +645,6 @@ static void radeon_legacy_tmds_ext_mode_set(struct drm_encoder *encoder,
 
 	DRM_DEBUG("\n");
 
-	if (radeon_crtc->crtc_id == 0)
-		radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
-
 	if (rdev->is_atom_bios) {
 		radeon_encoder->pixel_clock = adjusted_mode->clock;
 		atombios_external_tmds_setup(encoder, ATOM_ENABLE);
@@ -856,7 +678,7 @@ static void radeon_legacy_tmds_ext_mode_set(struct drm_encoder *encoder,
 	if (radeon_crtc->crtc_id == 0) {
 		if ((rdev->family == CHIP_R200) || ASIC_IS_R300(rdev)) {
 			fp2_gen_cntl &= ~R200_FP2_SOURCE_SEL_MASK;
-			if (radeon_encoder->flags & RADEON_USE_RMX)
+			if (radeon_encoder->rmx_type != RMX_OFF)
 				fp2_gen_cntl |= R200_FP2_SOURCE_SEL_RMX;
 			else
 				fp2_gen_cntl |= R200_FP2_SOURCE_SEL_CRTC1;
@@ -1014,9 +836,6 @@ static void radeon_legacy_tv_dac_mode_set(struct drm_encoder *encoder,
 
 	DRM_DEBUG("\n");
 
-	if (radeon_crtc->crtc_id == 0)
-		radeon_legacy_rmx_mode_set(encoder, mode, adjusted_mode);
-
 	if (rdev->family != CHIP_R200) {
 		tv_dac_cntl = RREG32(RADEON_TV_DAC_CNTL);
 		if (rdev->family == CHIP_R420 ||
@@ -1243,6 +1062,7 @@ radeon_add_legacy_encoder(struct drm_device *dev, uint32_t encoder_id, uint32_t
 
 	radeon_encoder->encoder_id = encoder_id;
 	radeon_encoder->devices = supported_device;
+	radeon_encoder->rmx_type = RMX_OFF;
 
 	switch (radeon_encoder->encoder_id) {
 	case ENCODER_OBJECT_ID_INTERNAL_LVDS:
diff --git a/drivers/gpu/drm/radeon/radeon_mode.h b/drivers/gpu/drm/radeon/radeon_mode.h
index 9173b68..3b09a1f 100644
--- a/drivers/gpu/drm/radeon/radeon_mode.h
+++ b/drivers/gpu/drm/radeon/radeon_mode.h
@@ -36,6 +36,9 @@
 #include <linux/i2c.h>
 #include <linux/i2c-id.h>
 #include <linux/i2c-algo-bit.h>
+#include "radeon_fixed.h"
+
+struct radeon_device;
 
 #define to_radeon_crtc(x) container_of(x, struct radeon_crtc, base)
 #define to_radeon_connector(x) container_of(x, struct radeon_connector, base)
@@ -124,6 +127,7 @@ struct radeon_tmds_pll {
 #define RADEON_PLL_PREFER_LOW_POST_DIV  (1 << 8)
 #define RADEON_PLL_PREFER_HIGH_POST_DIV (1 << 9)
 #define RADEON_PLL_USE_FRAC_FB_DIV      (1 << 10)
+#define RADEON_PLL_PREFER_CLOSEST_LOWER (1 << 11)
 
 struct radeon_pll {
 	uint16_t reference_freq;
@@ -170,6 +174,18 @@ struct radeon_mode_info {
 	struct atom_context *atom_context;
 	enum radeon_connector_table connector_table;
 	bool mode_config_initialized;
+	struct radeon_crtc *crtcs[2];
+};
+
+struct radeon_native_mode {
+	/* preferred mode */
+	uint32_t panel_xres, panel_yres;
+	uint32_t hoverplus, hsync_width;
+	uint32_t hblank;
+	uint32_t voverplus, vsync_width;
+	uint32_t vblank;
+	uint32_t dotclock;
+	uint32_t flags;
 };
 
 struct radeon_crtc {
@@ -185,19 +201,13 @@ struct radeon_crtc {
 	uint64_t cursor_addr;
 	int cursor_width;
 	int cursor_height;
-};
-
-#define RADEON_USE_RMX 1
-
-struct radeon_native_mode {
-	/* preferred mode */
-	uint32_t panel_xres, panel_yres;
-	uint32_t hoverplus, hsync_width;
-	uint32_t hblank;
-	uint32_t voverplus, vsync_width;
-	uint32_t vblank;
-	uint32_t dotclock;
-	uint32_t flags;
+	uint32_t legacy_display_base_addr;
+	uint32_t legacy_cursor_offset;
+	enum radeon_rmx_type rmx_type;
+	uint32_t devices;
+	fixed20_12 vsc;
+	fixed20_12 hsc;
+	struct radeon_native_mode native_mode;
 };
 
 struct radeon_encoder_primary_dac {
@@ -383,16 +393,9 @@ void radeon_enc_destroy(struct drm_encoder *encoder);
 void radeon_copy_fb(struct drm_device *dev, struct drm_gem_object *dst_obj);
 void radeon_combios_asic_init(struct drm_device *dev);
 extern int radeon_static_clocks_init(struct drm_device *dev);
-void radeon_init_disp_bw_legacy(struct drm_device *dev,
-				struct drm_display_mode *mode1,
-				uint32_t pixel_bytes1,
-				struct drm_display_mode *mode2,
-				uint32_t pixel_bytes2);
-void radeon_init_disp_bw_avivo(struct drm_device *dev,
-			       struct drm_display_mode *mode1,
-			       uint32_t pixel_bytes1,
-			       struct drm_display_mode *mode2,
-			       uint32_t pixel_bytes2);
-void radeon_init_disp_bandwidth(struct drm_device *dev);
+bool radeon_crtc_scaling_mode_fixup(struct drm_crtc *crtc,
+					struct drm_display_mode *mode,
+					struct drm_display_mode *adjusted_mode);
+void atom_rv515_force_tv_scaler(struct radeon_device *rdev);
 
 #endif
diff --git a/drivers/gpu/drm/radeon/radeon_object.c b/drivers/gpu/drm/radeon/radeon_object.c
index bac0d06..dd9ac2f 100644
--- a/drivers/gpu/drm/radeon/radeon_object.c
+++ b/drivers/gpu/drm/radeon/radeon_object.c
@@ -44,6 +44,9 @@ struct radeon_object {
 	uint64_t			gpu_addr;
 	void				*kptr;
 	bool				is_iomem;
+	uint32_t			tiling_flags;
+	uint32_t			pitch;
+	int				surface_reg;
 };
 
 int radeon_ttm_init(struct radeon_device *rdev);
@@ -70,6 +73,7 @@ static void radeon_ttm_object_object_destroy(struct ttm_buffer_object *tobj)
 
 	robj = container_of(tobj, struct radeon_object, tobj);
 	list_del_init(&robj->list);
+	radeon_object_clear_surface_reg(robj);
 	kfree(robj);
 }
 
@@ -99,16 +103,16 @@ static inline uint32_t radeon_object_flags_from_domain(uint32_t domain)
 {
 	uint32_t flags = 0;
 	if (domain & RADEON_GEM_DOMAIN_VRAM) {
-		flags |= TTM_PL_FLAG_VRAM;
+		flags |= TTM_PL_FLAG_VRAM | TTM_PL_FLAG_WC | TTM_PL_FLAG_UNCACHED;
 	}
 	if (domain & RADEON_GEM_DOMAIN_GTT) {
-		flags |= TTM_PL_FLAG_TT;
+		flags |= TTM_PL_FLAG_TT | TTM_PL_FLAG_WC | TTM_PL_FLAG_UNCACHED;
 	}
 	if (domain & RADEON_GEM_DOMAIN_CPU) {
-		flags |= TTM_PL_FLAG_SYSTEM;
+		flags |= TTM_PL_FLAG_SYSTEM | TTM_PL_MASK_CACHING;
 	}
 	if (!flags) {
-		flags |= TTM_PL_FLAG_SYSTEM;
+		flags |= TTM_PL_FLAG_SYSTEM | TTM_PL_MASK_CACHING;
 	}
 	return flags;
 }
@@ -141,6 +145,7 @@ int radeon_object_create(struct radeon_device *rdev,
 	}
 	robj->rdev = rdev;
 	robj->gobj = gobj;
+	robj->surface_reg = -1;
 	INIT_LIST_HEAD(&robj->list);
 
 	flags = radeon_object_flags_from_domain(domain);
@@ -304,7 +309,7 @@ int radeon_object_wait(struct radeon_object *robj)
 	}
 	spin_lock(&robj->tobj.lock);
 	if (robj->tobj.sync_obj) {
-		r = ttm_bo_wait(&robj->tobj, true, false, false);
+		r = ttm_bo_wait(&robj->tobj, true, true, false);
 	}
 	spin_unlock(&robj->tobj.lock);
 	radeon_object_unreserve(robj);
@@ -403,7 +408,6 @@ int radeon_object_list_validate(struct list_head *head, void *fence)
 	struct radeon_object *robj;
 	struct radeon_fence *old_fence = NULL;
 	struct list_head *i;
-	uint32_t flags;
 	int r;
 
 	r = radeon_object_list_reserve(head);
@@ -414,27 +418,25 @@ int radeon_object_list_validate(struct list_head *head, void *fence)
 	list_for_each(i, head) {
 		lobj = list_entry(i, struct radeon_object_list, list);
 		robj = lobj->robj;
-		if (lobj->wdomain) {
-			flags = radeon_object_flags_from_domain(lobj->wdomain);
-			flags |= TTM_PL_FLAG_TT;
-		} else {
-			flags = radeon_object_flags_from_domain(lobj->rdomain);
-			flags |= TTM_PL_FLAG_TT;
-			flags |= TTM_PL_FLAG_VRAM;
-		}
 		if (!robj->pin_count) {
-			robj->tobj.proposed_placement = flags | TTM_PL_MASK_CACHING;
+			if (lobj->wdomain) {
+				robj->tobj.proposed_placement =
+					radeon_object_flags_from_domain(lobj->wdomain);
+			} else {
+				robj->tobj.proposed_placement =
+					radeon_object_flags_from_domain(lobj->rdomain);
+			}
 			r = ttm_buffer_object_validate(&robj->tobj,
 						       robj->tobj.proposed_placement,
 						       true, false);
 			if (unlikely(r)) {
-				radeon_object_list_unreserve(head);
 				DRM_ERROR("radeon: failed to validate.\n");
 				return r;
 			}
 			radeon_object_gpu_addr(robj);
 		}
 		lobj->gpu_offset = robj->gpu_addr;
+		lobj->tiling_flags = robj->tiling_flags;
 		if (fence) {
 			old_fence = (struct radeon_fence *)robj->tobj.sync_obj;
 			robj->tobj.sync_obj = radeon_fence_ref(fence);
@@ -479,3 +481,127 @@ unsigned long radeon_object_size(struct radeon_object *robj)
 {
 	return robj->tobj.num_pages << PAGE_SHIFT;
 }
+
+int radeon_object_get_surface_reg(struct radeon_object *robj)
+{
+	struct radeon_device *rdev = robj->rdev;
+	struct radeon_surface_reg *reg;
+	struct radeon_object *old_object;
+	int steal;
+	int i;
+
+	if (!robj->tiling_flags)
+		return 0;
+
+	if (robj->surface_reg >= 0) {
+		reg = &rdev->surface_regs[robj->surface_reg];
+		i = robj->surface_reg;
+		goto out;
+	}
+
+	steal = -1;
+	for (i = 0; i < RADEON_GEM_MAX_SURFACES; i++) {
+
+		reg = &rdev->surface_regs[i];
+		if (!reg->robj)
+			break;
+
+		old_object = reg->robj;
+		if (old_object->pin_count == 0)
+			steal = i;
+	}
+
+	/* if we are all out */
+	if (i == RADEON_GEM_MAX_SURFACES) {
+		if (steal == -1)
+			return -ENOMEM;
+		/* find someone with a surface reg and nuke their BO */
+		reg = &rdev->surface_regs[steal];
+		old_object = reg->robj;
+		/* blow away the mapping */
+		DRM_DEBUG("stealing surface reg %d from %p\n", steal, old_object);
+		ttm_bo_unmap_virtual(&old_object->tobj);
+		old_object->surface_reg = -1;
+		i = steal;
+	}
+
+	robj->surface_reg = i;
+	reg->robj = robj;
+
+out:
+	radeon_set_surface_reg(rdev, i, robj->tiling_flags, robj->pitch,
+			       robj->tobj.mem.mm_node->start << PAGE_SHIFT,
+			       robj->tobj.num_pages << PAGE_SHIFT);
+	return 0;
+}
+
+void radeon_object_clear_surface_reg(struct radeon_object *robj)
+{
+	struct radeon_device *rdev = robj->rdev;
+	struct radeon_surface_reg *reg;
+
+	if (robj->surface_reg == -1)
+		return;
+
+	reg = &rdev->surface_regs[robj->surface_reg];
+	radeon_clear_surface_reg(rdev, robj->surface_reg);
+
+	reg->robj = NULL;
+	robj->surface_reg = -1;
+}
+
+void radeon_object_set_tiling_flags(struct radeon_object *robj,
+				    uint32_t tiling_flags, uint32_t pitch)
+{
+	robj->tiling_flags = tiling_flags;
+	robj->pitch = pitch;
+}
+
+void radeon_object_get_tiling_flags(struct radeon_object *robj,
+				    uint32_t *tiling_flags,
+				    uint32_t *pitch)
+{
+	if (tiling_flags)
+		*tiling_flags = robj->tiling_flags;
+	if (pitch)
+		*pitch = robj->pitch;
+}
+
+int radeon_object_check_tiling(struct radeon_object *robj, bool has_moved,
+			       bool force_drop)
+{
+	if (!(robj->tiling_flags & RADEON_TILING_SURFACE))
+		return 0;
+
+	if (force_drop) {
+		radeon_object_clear_surface_reg(robj);
+		return 0;
+	}
+
+	if (robj->tobj.mem.mem_type != TTM_PL_VRAM) {
+		if (!has_moved)
+			return 0;
+
+		if (robj->surface_reg >= 0)
+			radeon_object_clear_surface_reg(robj);
+		return 0;
+	}
+
+	if ((robj->surface_reg >= 0) && !has_moved)
+		return 0;
+
+	return radeon_object_get_surface_reg(robj);
+}
+
+void radeon_bo_move_notify(struct ttm_buffer_object *bo,
+			  struct ttm_mem_reg *mem)
+{
+	struct radeon_object *robj = container_of(bo, struct radeon_object, tobj);
+	radeon_object_check_tiling(robj, 0, 1);
+}
+
+void radeon_bo_fault_reserve_notify(struct ttm_buffer_object *bo)
+{
+	struct radeon_object *robj = container_of(bo, struct radeon_object, tobj);
+	radeon_object_check_tiling(robj, 0, 0);
+}
diff --git a/drivers/gpu/drm/radeon/radeon_ring.c b/drivers/gpu/drm/radeon/radeon_ring.c
index a853261..60d1593 100644
--- a/drivers/gpu/drm/radeon/radeon_ring.c
+++ b/drivers/gpu/drm/radeon/radeon_ring.c
@@ -126,32 +126,19 @@ static void radeon_ib_align(struct radeon_device *rdev, struct radeon_ib *ib)
 	}
 }
 
-static void radeon_ib_cpu_flush(struct radeon_device *rdev,
-				struct radeon_ib *ib)
-{
-	unsigned long tmp;
-	unsigned i;
-
-	/* To force CPU cache flush ugly but seems reliable */
-	for (i = 0; i < ib->length_dw; i += (rdev->cp.align_mask + 1)) {
-		tmp = readl(&ib->ptr[i]);
-	}
-}
-
 int radeon_ib_schedule(struct radeon_device *rdev, struct radeon_ib *ib)
 {
 	int r = 0;
 
 	mutex_lock(&rdev->ib_pool.mutex);
 	radeon_ib_align(rdev, ib);
-	radeon_ib_cpu_flush(rdev, ib);
 	if (!ib->length_dw || !rdev->cp.ready) {
 		/* TODO: Nothings in the ib we should report. */
 		mutex_unlock(&rdev->ib_pool.mutex);
 		DRM_ERROR("radeon: couldn't schedule IB(%lu).\n", ib->idx);
 		return -EINVAL;
 	}
-	/* 64 dwords should be enought for fence too */
+	/* 64 dwords should be enough for fence too */
 	r = radeon_ring_lock(rdev, 64);
 	if (r) {
 		DRM_ERROR("radeon: scheduling IB failled (%d).\n", r);
diff --git a/drivers/gpu/drm/radeon/radeon_share.h b/drivers/gpu/drm/radeon/radeon_share.h
new file mode 100644
index 0000000..63a7735
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_share.h
@@ -0,0 +1,39 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#ifndef __RADEON_SHARE_H__
+#define __RADEON_SHARE_H__
+
+void r100_vram_init_sizes(struct radeon_device *rdev);
+
+void rs690_line_buffer_adjust(struct radeon_device *rdev,
+			      struct drm_display_mode *mode1,
+			      struct drm_display_mode *mode2);
+
+void rv515_bandwidth_avivo_update(struct radeon_device *rdev);
+
+#endif
diff --git a/drivers/gpu/drm/radeon/radeon_test.c b/drivers/gpu/drm/radeon/radeon_test.c
new file mode 100644
index 0000000..03c33cf
--- /dev/null
+++ b/drivers/gpu/drm/radeon/radeon_test.c
@@ -0,0 +1,209 @@
+/*
+ * Copyright 2009 VMware, Inc.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Michel Dänzer
+ */
+#include <drm/drmP.h>
+#include <drm/radeon_drm.h>
+#include "radeon_reg.h"
+#include "radeon.h"
+
+
+/* Test BO GTT->VRAM and VRAM->GTT GPU copies across the whole GTT aperture */
+void radeon_test_moves(struct radeon_device *rdev)
+{
+	struct radeon_object *vram_obj = NULL;
+	struct radeon_object **gtt_obj = NULL;
+	struct radeon_fence *fence = NULL;
+	uint64_t gtt_addr, vram_addr;
+	unsigned i, n, size;
+	int r;
+
+	size = 1024 * 1024;
+
+	/* Number of tests =
+	 * (Total GTT - IB pool - writeback page - ring buffer) / test size
+	 */
+	n = (rdev->mc.gtt_size - RADEON_IB_POOL_SIZE*64*1024 - 4096 -
+	     rdev->cp.ring_size) / size;
+
+	gtt_obj = kzalloc(n * sizeof(*gtt_obj), GFP_KERNEL);
+	if (!gtt_obj) {
+		DRM_ERROR("Failed to allocate %d pointers\n", n);
+		r = 1;
+		goto out_cleanup;
+	}
+
+	r = radeon_object_create(rdev, NULL, size, true, RADEON_GEM_DOMAIN_VRAM,
+				 false, &vram_obj);
+	if (r) {
+		DRM_ERROR("Failed to create VRAM object\n");
+		goto out_cleanup;
+	}
+
+	r = radeon_object_pin(vram_obj, RADEON_GEM_DOMAIN_VRAM, &vram_addr);
+	if (r) {
+		DRM_ERROR("Failed to pin VRAM object\n");
+		goto out_cleanup;
+	}
+
+	for (i = 0; i < n; i++) {
+		void *gtt_map, *vram_map;
+		void **gtt_start, **gtt_end;
+		void **vram_start, **vram_end;
+
+		r = radeon_object_create(rdev, NULL, size, true,
+					 RADEON_GEM_DOMAIN_GTT, false, gtt_obj + i);
+		if (r) {
+			DRM_ERROR("Failed to create GTT object %d\n", i);
+			goto out_cleanup;
+		}
+
+		r = radeon_object_pin(gtt_obj[i], RADEON_GEM_DOMAIN_GTT, &gtt_addr);
+		if (r) {
+			DRM_ERROR("Failed to pin GTT object %d\n", i);
+			goto out_cleanup;
+		}
+
+		r = radeon_object_kmap(gtt_obj[i], &gtt_map);
+		if (r) {
+			DRM_ERROR("Failed to map GTT object %d\n", i);
+			goto out_cleanup;
+		}
+
+		for (gtt_start = gtt_map, gtt_end = gtt_map + size;
+		     gtt_start < gtt_end;
+		     gtt_start++)
+			*gtt_start = gtt_start;
+
+		radeon_object_kunmap(gtt_obj[i]);
+
+		r = radeon_fence_create(rdev, &fence);
+		if (r) {
+			DRM_ERROR("Failed to create GTT->VRAM fence %d\n", i);
+			goto out_cleanup;
+		}
+
+		r = radeon_copy(rdev, gtt_addr, vram_addr, size / 4096, fence);
+		if (r) {
+			DRM_ERROR("Failed GTT->VRAM copy %d\n", i);
+			goto out_cleanup;
+		}
+
+		r = radeon_fence_wait(fence, false);
+		if (r) {
+			DRM_ERROR("Failed to wait for GTT->VRAM fence %d\n", i);
+			goto out_cleanup;
+		}
+
+		radeon_fence_unref(&fence);
+
+		r = radeon_object_kmap(vram_obj, &vram_map);
+		if (r) {
+			DRM_ERROR("Failed to map VRAM object after copy %d\n", i);
+			goto out_cleanup;
+		}
+
+		for (gtt_start = gtt_map, gtt_end = gtt_map + size,
+		     vram_start = vram_map, vram_end = vram_map + size;
+		     vram_start < vram_end;
+		     gtt_start++, vram_start++) {
+			if (*vram_start != gtt_start) {
+				DRM_ERROR("Incorrect GTT->VRAM copy %d: Got 0x%p, "
+					  "expected 0x%p (GTT map 0x%p-0x%p)\n",
+					  i, *vram_start, gtt_start, gtt_map,
+					  gtt_end);
+				radeon_object_kunmap(vram_obj);
+				goto out_cleanup;
+			}
+			*vram_start = vram_start;
+		}
+
+		radeon_object_kunmap(vram_obj);
+
+		r = radeon_fence_create(rdev, &fence);
+		if (r) {
+			DRM_ERROR("Failed to create VRAM->GTT fence %d\n", i);
+			goto out_cleanup;
+		}
+
+		r = radeon_copy(rdev, vram_addr, gtt_addr, size / 4096, fence);
+		if (r) {
+			DRM_ERROR("Failed VRAM->GTT copy %d\n", i);
+			goto out_cleanup;
+		}
+
+		r = radeon_fence_wait(fence, false);
+		if (r) {
+			DRM_ERROR("Failed to wait for VRAM->GTT fence %d\n", i);
+			goto out_cleanup;
+		}
+
+		radeon_fence_unref(&fence);
+
+		r = radeon_object_kmap(gtt_obj[i], &gtt_map);
+		if (r) {
+			DRM_ERROR("Failed to map GTT object after copy %d\n", i);
+			goto out_cleanup;
+		}
+
+		for (gtt_start = gtt_map, gtt_end = gtt_map + size,
+		     vram_start = vram_map, vram_end = vram_map + size;
+		     gtt_start < gtt_end;
+		     gtt_start++, vram_start++) {
+			if (*gtt_start != vram_start) {
+				DRM_ERROR("Incorrect VRAM->GTT copy %d: Got 0x%p, "
+					  "expected 0x%p (VRAM map 0x%p-0x%p)\n",
+					  i, *gtt_start, vram_start, vram_map,
+					  vram_end);
+				radeon_object_kunmap(gtt_obj[i]);
+				goto out_cleanup;
+			}
+		}
+
+		radeon_object_kunmap(gtt_obj[i]);
+
+		DRM_INFO("Tested GTT->VRAM and VRAM->GTT copy for GTT offset 0x%llx\n",
+			 gtt_addr - rdev->mc.gtt_location);
+	}
+
+out_cleanup:
+	if (vram_obj) {
+		radeon_object_unpin(vram_obj);
+		radeon_object_unref(&vram_obj);
+	}
+	if (gtt_obj) {
+		for (i = 0; i < n; i++) {
+			if (gtt_obj[i]) {
+				radeon_object_unpin(gtt_obj[i]);
+				radeon_object_unref(&gtt_obj[i]);
+			}
+		}
+		kfree(gtt_obj);
+	}
+	if (fence) {
+		radeon_fence_unref(&fence);
+	}
+	if (r) {
+		printk(KERN_WARNING "Error while testing BO move.\n");
+	}
+}
+
diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c
index 1227a97..15c3531 100644
--- a/drivers/gpu/drm/radeon/radeon_ttm.c
+++ b/drivers/gpu/drm/radeon/radeon_ttm.c
@@ -355,23 +355,26 @@ static int radeon_bo_move(struct ttm_buffer_object *bo,
 	if (!rdev->cp.ready) {
 		/* use memcpy */
 		DRM_ERROR("CP is not ready use memcpy.\n");
-		return ttm_bo_move_memcpy(bo, evict, no_wait, new_mem);
+		goto memcpy;
 	}
 
 	if (old_mem->mem_type == TTM_PL_VRAM &&
 	    new_mem->mem_type == TTM_PL_SYSTEM) {
-		return radeon_move_vram_ram(bo, evict, interruptible,
+		r = radeon_move_vram_ram(bo, evict, interruptible,
 					    no_wait, new_mem);
 	} else if (old_mem->mem_type == TTM_PL_SYSTEM &&
 		   new_mem->mem_type == TTM_PL_VRAM) {
-		return radeon_move_ram_vram(bo, evict, interruptible,
+		r = radeon_move_ram_vram(bo, evict, interruptible,
 					    no_wait, new_mem);
 	} else {
 		r = radeon_move_blit(bo, evict, no_wait, new_mem, old_mem);
-		if (unlikely(r)) {
-			return r;
-		}
 	}
+
+	if (r) {
+memcpy:
+		r = ttm_bo_move_memcpy(bo, evict, no_wait, new_mem);
+	}
+
 	return r;
 }
 
@@ -429,6 +432,8 @@ static struct ttm_bo_driver radeon_bo_driver = {
 	.sync_obj_flush = &radeon_sync_obj_flush,
 	.sync_obj_unref = &radeon_sync_obj_unref,
 	.sync_obj_ref = &radeon_sync_obj_ref,
+	.move_notify = &radeon_bo_move_notify,
+	.fault_reserve_notify = &radeon_bo_fault_reserve_notify,
 };
 
 int radeon_ttm_init(struct radeon_device *rdev)
@@ -442,13 +447,14 @@ int radeon_ttm_init(struct radeon_device *rdev)
 	/* No others user of address space so set it to 0 */
 	r = ttm_bo_device_init(&rdev->mman.bdev,
 			       rdev->mman.mem_global_ref.object,
-			       &radeon_bo_driver, DRM_FILE_PAGE_OFFSET);
+			       &radeon_bo_driver, DRM_FILE_PAGE_OFFSET,
+			       rdev->need_dma32);
 	if (r) {
 		DRM_ERROR("failed initializing buffer object driver(%d).\n", r);
 		return r;
 	}
 	r = ttm_bo_init_mm(&rdev->mman.bdev, TTM_PL_VRAM, 0,
-			   ((rdev->mc.aper_size) >> PAGE_SHIFT));
+			   ((rdev->mc.real_vram_size) >> PAGE_SHIFT));
 	if (r) {
 		DRM_ERROR("Failed initializing VRAM heap.\n");
 		return r;
@@ -465,7 +471,7 @@ int radeon_ttm_init(struct radeon_device *rdev)
 		return r;
 	}
 	DRM_INFO("radeon: %uM of VRAM memory ready\n",
-		 rdev->mc.vram_size / (1024 * 1024));
+		 rdev->mc.real_vram_size / (1024 * 1024));
 	r = ttm_bo_init_mm(&rdev->mman.bdev, TTM_PL_TT, 0,
 			   ((rdev->mc.gtt_size) >> PAGE_SHIFT));
 	if (r) {
diff --git a/drivers/gpu/drm/radeon/rs400.c b/drivers/gpu/drm/radeon/rs400.c
index cc074b5..b29affd 100644
--- a/drivers/gpu/drm/radeon/rs400.c
+++ b/drivers/gpu/drm/radeon/rs400.c
@@ -29,6 +29,7 @@
 #include <drm/drmP.h>
 #include "radeon_reg.h"
 #include "radeon.h"
+#include "radeon_share.h"
 
 /* rs400,rs480 depends on : */
 void r100_hdp_reset(struct radeon_device *rdev);
@@ -164,7 +165,9 @@ int rs400_gart_enable(struct radeon_device *rdev)
 		WREG32(RADEON_BUS_CNTL, tmp);
 	}
 	/* Table should be in 32bits address space so ignore bits above. */
-	tmp = rdev->gart.table_addr & 0xfffff000;
+	tmp = (u32)rdev->gart.table_addr & 0xfffff000;
+	tmp |= (upper_32_bits(rdev->gart.table_addr) & 0xff) << 4;
+
 	WREG32_MC(RS480_GART_BASE, tmp);
 	/* TODO: more tweaking here */
 	WREG32_MC(RS480_GART_FEATURE_ID,
@@ -201,10 +204,17 @@ void rs400_gart_disable(struct radeon_device *rdev)
 
 int rs400_gart_set_page(struct radeon_device *rdev, int i, uint64_t addr)
 {
+	uint32_t entry;
+
 	if (i < 0 || i > rdev->gart.num_gpu_pages) {
 		return -EINVAL;
 	}
-	rdev->gart.table.ram.ptr[i] = cpu_to_le32(((uint32_t)addr) | 0xC);
+
+	entry = (lower_32_bits(addr) & PAGE_MASK) |
+		((upper_32_bits(addr) & 0xff) << 4) |
+		0xc;
+	entry = cpu_to_le32(entry);
+	rdev->gart.table.ram.ptr[i] = entry;
 	return 0;
 }
 
@@ -223,10 +233,9 @@ int rs400_mc_init(struct radeon_device *rdev)
 
 	rs400_gpu_init(rdev);
 	rs400_gart_disable(rdev);
-	rdev->mc.gtt_location = rdev->mc.vram_size;
+	rdev->mc.gtt_location = rdev->mc.mc_vram_size;
 	rdev->mc.gtt_location += (rdev->mc.gtt_size - 1);
 	rdev->mc.gtt_location &= ~(rdev->mc.gtt_size - 1);
-	rdev->mc.vram_location = 0xFFFFFFFFUL;
 	r = radeon_mc_setup(rdev);
 	if (r) {
 		return r;
@@ -238,7 +247,7 @@ int rs400_mc_init(struct radeon_device *rdev)
 		       "programming pipes. Bad things might happen.\n");
 	}
 
-	tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+	tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
 	tmp = REG_SET(RADEON_MC_FB_TOP, tmp >> 16);
 	tmp |= REG_SET(RADEON_MC_FB_START, rdev->mc.vram_location >> 16);
 	WREG32(RADEON_MC_FB_LOCATION, tmp);
@@ -284,21 +293,12 @@ void rs400_gpu_init(struct radeon_device *rdev)
  */
 void rs400_vram_info(struct radeon_device *rdev)
 {
-	uint32_t tom;
-
 	rs400_gart_adjust_size(rdev);
 	/* DDR for all card after R300 & IGP */
 	rdev->mc.vram_is_ddr = true;
 	rdev->mc.vram_width = 128;
 
-	/* read NB_TOM to get the amount of ram stolen for the GPU */
-	tom = RREG32(RADEON_NB_TOM);
-	rdev->mc.vram_size = (((tom >> 16) - (tom & 0xffff) + 1) << 16);
-	WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
-
-	/* Could aper size report 0 ? */
-	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
-	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+	r100_vram_init_sizes(rdev);
 }
 
 
diff --git a/drivers/gpu/drm/radeon/rs600.c b/drivers/gpu/drm/radeon/rs600.c
index ab0c967..bbea6dee 100644
--- a/drivers/gpu/drm/radeon/rs600.c
+++ b/drivers/gpu/drm/radeon/rs600.c
@@ -223,7 +223,7 @@ int rs600_mc_init(struct radeon_device *rdev)
 		printk(KERN_WARNING "Failed to wait MC idle while "
 		       "programming pipes. Bad things might happen.\n");
 	}
-	tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+	tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
 	tmp = REG_SET(RS600_MC_FB_TOP, tmp >> 16);
 	tmp |= REG_SET(RS600_MC_FB_START, rdev->mc.vram_location >> 16);
 	WREG32_MC(RS600_MC_FB_LOCATION, tmp);
@@ -301,6 +301,11 @@ void rs600_vram_info(struct radeon_device *rdev)
 	rdev->mc.vram_width = 128;
 }
 
+void rs600_bandwidth_update(struct radeon_device *rdev)
+{
+	/* FIXME: implement, should this be like rs690 ? */
+}
+
 
 /*
  * Indirect registers accessor
diff --git a/drivers/gpu/drm/radeon/rs690.c b/drivers/gpu/drm/radeon/rs690.c
index 79ba850..839595b 100644
--- a/drivers/gpu/drm/radeon/rs690.c
+++ b/drivers/gpu/drm/radeon/rs690.c
@@ -28,6 +28,9 @@
 #include "drmP.h"
 #include "radeon_reg.h"
 #include "radeon.h"
+#include "rs690r.h"
+#include "atom.h"
+#include "atom-bits.h"
 
 /* rs690,rs740 depends on : */
 void r100_hdp_reset(struct radeon_device *rdev);
@@ -64,7 +67,7 @@ int rs690_mc_init(struct radeon_device *rdev)
 	rs400_gart_disable(rdev);
 
 	/* Setup GPU memory space */
-	rdev->mc.gtt_location = rdev->mc.vram_size;
+	rdev->mc.gtt_location = rdev->mc.mc_vram_size;
 	rdev->mc.gtt_location += (rdev->mc.gtt_size - 1);
 	rdev->mc.gtt_location &= ~(rdev->mc.gtt_size - 1);
 	rdev->mc.vram_location = 0xFFFFFFFFUL;
@@ -79,7 +82,7 @@ int rs690_mc_init(struct radeon_device *rdev)
 		printk(KERN_WARNING "Failed to wait MC idle while "
 		       "programming pipes. Bad things might happen.\n");
 	}
-	tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+	tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
 	tmp = REG_SET(RS690_MC_FB_TOP, tmp >> 16);
 	tmp |= REG_SET(RS690_MC_FB_START, rdev->mc.vram_location >> 16);
 	WREG32_MC(RS690_MCCFG_FB_LOCATION, tmp);
@@ -138,9 +141,82 @@ void rs690_gpu_init(struct radeon_device *rdev)
 /*
  * VRAM info.
  */
+void rs690_pm_info(struct radeon_device *rdev)
+{
+	int index = GetIndexIntoMasterTable(DATA, IntegratedSystemInfo);
+	struct _ATOM_INTEGRATED_SYSTEM_INFO *info;
+	struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 *info_v2;
+	void *ptr;
+	uint16_t data_offset;
+	uint8_t frev, crev;
+	fixed20_12 tmp;
+
+	atom_parse_data_header(rdev->mode_info.atom_context, index, NULL,
+			       &frev, &crev, &data_offset);
+	ptr = rdev->mode_info.atom_context->bios + data_offset;
+	info = (struct _ATOM_INTEGRATED_SYSTEM_INFO *)ptr;
+	info_v2 = (struct _ATOM_INTEGRATED_SYSTEM_INFO_V2 *)ptr;
+	/* Get various system informations from bios */
+	switch (crev) {
+	case 1:
+		tmp.full = rfixed_const(100);
+		rdev->pm.igp_sideport_mclk.full = rfixed_const(info->ulBootUpMemoryClock);
+		rdev->pm.igp_sideport_mclk.full = rfixed_div(rdev->pm.igp_sideport_mclk, tmp);
+		rdev->pm.igp_system_mclk.full = rfixed_const(le16_to_cpu(info->usK8MemoryClock));
+		rdev->pm.igp_ht_link_clk.full = rfixed_const(le16_to_cpu(info->usFSBClock));
+		rdev->pm.igp_ht_link_width.full = rfixed_const(info->ucHTLinkWidth);
+		break;
+	case 2:
+		tmp.full = rfixed_const(100);
+		rdev->pm.igp_sideport_mclk.full = rfixed_const(info_v2->ulBootUpSidePortClock);
+		rdev->pm.igp_sideport_mclk.full = rfixed_div(rdev->pm.igp_sideport_mclk, tmp);
+		rdev->pm.igp_system_mclk.full = rfixed_const(info_v2->ulBootUpUMAClock);
+		rdev->pm.igp_system_mclk.full = rfixed_div(rdev->pm.igp_system_mclk, tmp);
+		rdev->pm.igp_ht_link_clk.full = rfixed_const(info_v2->ulHTLinkFreq);
+		rdev->pm.igp_ht_link_clk.full = rfixed_div(rdev->pm.igp_ht_link_clk, tmp);
+		rdev->pm.igp_ht_link_width.full = rfixed_const(le16_to_cpu(info_v2->usMinHTLinkWidth));
+		break;
+	default:
+		tmp.full = rfixed_const(100);
+		/* We assume the slower possible clock ie worst case */
+		/* DDR 333Mhz */
+		rdev->pm.igp_sideport_mclk.full = rfixed_const(333);
+		/* FIXME: system clock ? */
+		rdev->pm.igp_system_mclk.full = rfixed_const(100);
+		rdev->pm.igp_system_mclk.full = rfixed_div(rdev->pm.igp_system_mclk, tmp);
+		rdev->pm.igp_ht_link_clk.full = rfixed_const(200);
+		rdev->pm.igp_ht_link_width.full = rfixed_const(8);
+		DRM_ERROR("No integrated system info for your GPU, using safe default\n");
+		break;
+	}
+	/* Compute various bandwidth */
+	/* k8_bandwidth = (memory_clk / 2) * 2 * 8 * 0.5 = memory_clk * 4  */
+	tmp.full = rfixed_const(4);
+	rdev->pm.k8_bandwidth.full = rfixed_mul(rdev->pm.igp_system_mclk, tmp);
+	/* ht_bandwidth = ht_clk * 2 * ht_width / 8 * 0.8
+	 *              = ht_clk * ht_width / 5
+	 */
+	tmp.full = rfixed_const(5);
+	rdev->pm.ht_bandwidth.full = rfixed_mul(rdev->pm.igp_ht_link_clk,
+						rdev->pm.igp_ht_link_width);
+	rdev->pm.ht_bandwidth.full = rfixed_div(rdev->pm.ht_bandwidth, tmp);
+	if (tmp.full < rdev->pm.max_bandwidth.full) {
+		/* HT link is a limiting factor */
+		rdev->pm.max_bandwidth.full = tmp.full;
+	}
+	/* sideport_bandwidth = (sideport_clk / 2) * 2 * 2 * 0.7
+	 *                    = (sideport_clk * 14) / 10
+	 */
+	tmp.full = rfixed_const(14);
+	rdev->pm.sideport_bandwidth.full = rfixed_mul(rdev->pm.igp_sideport_mclk, tmp);
+	tmp.full = rfixed_const(10);
+	rdev->pm.sideport_bandwidth.full = rfixed_div(rdev->pm.sideport_bandwidth, tmp);
+}
+
 void rs690_vram_info(struct radeon_device *rdev)
 {
 	uint32_t tmp;
+	fixed20_12 a;
 
 	rs400_gart_adjust_size(rdev);
 	/* DDR for all card after R300 & IGP */
@@ -152,12 +228,409 @@ void rs690_vram_info(struct radeon_device *rdev)
 	} else {
 		rdev->mc.vram_width = 64;
 	}
-	rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
+	rdev->mc.real_vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
+	rdev->mc.mc_vram_size = rdev->mc.real_vram_size;
 
 	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
 	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+	rs690_pm_info(rdev);
+	/* FIXME: we should enforce default clock in case GPU is not in
+	 * default setup
+	 */
+	a.full = rfixed_const(100);
+	rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk);
+	rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
+	a.full = rfixed_const(16);
+	/* core_bandwidth = sclk(Mhz) * 16 */
+	rdev->pm.core_bandwidth.full = rfixed_div(rdev->pm.sclk, a);
+}
+
+void rs690_line_buffer_adjust(struct radeon_device *rdev,
+			      struct drm_display_mode *mode1,
+			      struct drm_display_mode *mode2)
+{
+	u32 tmp;
+
+	/*
+	 * Line Buffer Setup
+	 * There is a single line buffer shared by both display controllers.
+	 * DC_LB_MEMORY_SPLIT controls how that line buffer is shared between
+	 * the display controllers.  The paritioning can either be done
+	 * manually or via one of four preset allocations specified in bits 1:0:
+	 *  0 - line buffer is divided in half and shared between crtc
+	 *  1 - D1 gets 3/4 of the line buffer, D2 gets 1/4
+	 *  2 - D1 gets the whole buffer
+	 *  3 - D1 gets 1/4 of the line buffer, D2 gets 3/4
+	 * Setting bit 2 of DC_LB_MEMORY_SPLIT controls switches to manual
+	 * allocation mode. In manual allocation mode, D1 always starts at 0,
+	 * D1 end/2 is specified in bits 14:4; D2 allocation follows D1.
+	 */
+	tmp = RREG32(DC_LB_MEMORY_SPLIT) & ~DC_LB_MEMORY_SPLIT_MASK;
+	tmp &= ~DC_LB_MEMORY_SPLIT_SHIFT_MODE;
+	/* auto */
+	if (mode1 && mode2) {
+		if (mode1->hdisplay > mode2->hdisplay) {
+			if (mode1->hdisplay > 2560)
+				tmp |= DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q;
+			else
+				tmp |= DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
+		} else if (mode2->hdisplay > mode1->hdisplay) {
+			if (mode2->hdisplay > 2560)
+				tmp |= DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
+			else
+				tmp |= DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
+		} else
+			tmp |= AVIVO_DC_LB_MEMORY_SPLIT_D1HALF_D2HALF;
+	} else if (mode1) {
+		tmp |= DC_LB_MEMORY_SPLIT_D1_ONLY;
+	} else if (mode2) {
+		tmp |= DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q;
+	}
+	WREG32(DC_LB_MEMORY_SPLIT, tmp);
 }
 
+struct rs690_watermark {
+	u32        lb_request_fifo_depth;
+	fixed20_12 num_line_pair;
+	fixed20_12 estimated_width;
+	fixed20_12 worst_case_latency;
+	fixed20_12 consumption_rate;
+	fixed20_12 active_time;
+	fixed20_12 dbpp;
+	fixed20_12 priority_mark_max;
+	fixed20_12 priority_mark;
+	fixed20_12 sclk;
+};
+
+void rs690_crtc_bandwidth_compute(struct radeon_device *rdev,
+				  struct radeon_crtc *crtc,
+				  struct rs690_watermark *wm)
+{
+	struct drm_display_mode *mode = &crtc->base.mode;
+	fixed20_12 a, b, c;
+	fixed20_12 pclk, request_fifo_depth, tolerable_latency, estimated_width;
+	fixed20_12 consumption_time, line_time, chunk_time, read_delay_latency;
+	/* FIXME: detect IGP with sideport memory, i don't think there is any
+	 * such product available
+	 */
+	bool sideport = false;
+
+	if (!crtc->base.enabled) {
+		/* FIXME: wouldn't it better to set priority mark to maximum */
+		wm->lb_request_fifo_depth = 4;
+		return;
+	}
+
+	if (crtc->vsc.full > rfixed_const(2))
+		wm->num_line_pair.full = rfixed_const(2);
+	else
+		wm->num_line_pair.full = rfixed_const(1);
+
+	b.full = rfixed_const(mode->crtc_hdisplay);
+	c.full = rfixed_const(256);
+	a.full = rfixed_mul(wm->num_line_pair, b);
+	request_fifo_depth.full = rfixed_div(a, c);
+	if (a.full < rfixed_const(4)) {
+		wm->lb_request_fifo_depth = 4;
+	} else {
+		wm->lb_request_fifo_depth = rfixed_trunc(request_fifo_depth);
+	}
+
+	/* Determine consumption rate
+	 *  pclk = pixel clock period(ns) = 1000 / (mode.clock / 1000)
+	 *  vtaps = number of vertical taps,
+	 *  vsc = vertical scaling ratio, defined as source/destination
+	 *  hsc = horizontal scaling ration, defined as source/destination
+	 */
+	a.full = rfixed_const(mode->clock);
+	b.full = rfixed_const(1000);
+	a.full = rfixed_div(a, b);
+	pclk.full = rfixed_div(b, a);
+	if (crtc->rmx_type != RMX_OFF) {
+		b.full = rfixed_const(2);
+		if (crtc->vsc.full > b.full)
+			b.full = crtc->vsc.full;
+		b.full = rfixed_mul(b, crtc->hsc);
+		c.full = rfixed_const(2);
+		b.full = rfixed_div(b, c);
+		consumption_time.full = rfixed_div(pclk, b);
+	} else {
+		consumption_time.full = pclk.full;
+	}
+	a.full = rfixed_const(1);
+	wm->consumption_rate.full = rfixed_div(a, consumption_time);
+
+
+	/* Determine line time
+	 *  LineTime = total time for one line of displayhtotal
+	 *  LineTime = total number of horizontal pixels
+	 *  pclk = pixel clock period(ns)
+	 */
+	a.full = rfixed_const(crtc->base.mode.crtc_htotal);
+	line_time.full = rfixed_mul(a, pclk);
+
+	/* Determine active time
+	 *  ActiveTime = time of active region of display within one line,
+	 *  hactive = total number of horizontal active pixels
+	 *  htotal = total number of horizontal pixels
+	 */
+	a.full = rfixed_const(crtc->base.mode.crtc_htotal);
+	b.full = rfixed_const(crtc->base.mode.crtc_hdisplay);
+	wm->active_time.full = rfixed_mul(line_time, b);
+	wm->active_time.full = rfixed_div(wm->active_time, a);
+
+	/* Maximun bandwidth is the minimun bandwidth of all component */
+	rdev->pm.max_bandwidth = rdev->pm.core_bandwidth;
+	if (sideport) {
+		if (rdev->pm.max_bandwidth.full > rdev->pm.sideport_bandwidth.full &&
+			rdev->pm.sideport_bandwidth.full)
+			rdev->pm.max_bandwidth = rdev->pm.sideport_bandwidth;
+		read_delay_latency.full = rfixed_const(370 * 800 * 1000);
+		read_delay_latency.full = rfixed_div(read_delay_latency,
+			rdev->pm.igp_sideport_mclk);
+	} else {
+		if (rdev->pm.max_bandwidth.full > rdev->pm.k8_bandwidth.full &&
+			rdev->pm.k8_bandwidth.full)
+			rdev->pm.max_bandwidth = rdev->pm.k8_bandwidth;
+		if (rdev->pm.max_bandwidth.full > rdev->pm.ht_bandwidth.full &&
+			rdev->pm.ht_bandwidth.full)
+			rdev->pm.max_bandwidth = rdev->pm.ht_bandwidth;
+		read_delay_latency.full = rfixed_const(5000);
+	}
+
+	/* sclk = system clocks(ns) = 1000 / max_bandwidth / 16 */
+	a.full = rfixed_const(16);
+	rdev->pm.sclk.full = rfixed_mul(rdev->pm.max_bandwidth, a);
+	a.full = rfixed_const(1000);
+	rdev->pm.sclk.full = rfixed_div(a, rdev->pm.sclk);
+	/* Determine chunk time
+	 * ChunkTime = the time it takes the DCP to send one chunk of data
+	 * to the LB which consists of pipeline delay and inter chunk gap
+	 * sclk = system clock(ns)
+	 */
+	a.full = rfixed_const(256 * 13);
+	chunk_time.full = rfixed_mul(rdev->pm.sclk, a);
+	a.full = rfixed_const(10);
+	chunk_time.full = rfixed_div(chunk_time, a);
+
+	/* Determine the worst case latency
+	 * NumLinePair = Number of line pairs to request(1=2 lines, 2=4 lines)
+	 * WorstCaseLatency = worst case time from urgent to when the MC starts
+	 *                    to return data
+	 * READ_DELAY_IDLE_MAX = constant of 1us
+	 * ChunkTime = time it takes the DCP to send one chunk of data to the LB
+	 *             which consists of pipeline delay and inter chunk gap
+	 */
+	if (rfixed_trunc(wm->num_line_pair) > 1) {
+		a.full = rfixed_const(3);
+		wm->worst_case_latency.full = rfixed_mul(a, chunk_time);
+		wm->worst_case_latency.full += read_delay_latency.full;
+	} else {
+		a.full = rfixed_const(2);
+		wm->worst_case_latency.full = rfixed_mul(a, chunk_time);
+		wm->worst_case_latency.full += read_delay_latency.full;
+	}
+
+	/* Determine the tolerable latency
+	 * TolerableLatency = Any given request has only 1 line time
+	 *                    for the data to be returned
+	 * LBRequestFifoDepth = Number of chunk requests the LB can
+	 *                      put into the request FIFO for a display
+	 *  LineTime = total time for one line of display
+	 *  ChunkTime = the time it takes the DCP to send one chunk
+	 *              of data to the LB which consists of
+	 *  pipeline delay and inter chunk gap
+	 */
+	if ((2+wm->lb_request_fifo_depth) >= rfixed_trunc(request_fifo_depth)) {
+		tolerable_latency.full = line_time.full;
+	} else {
+		tolerable_latency.full = rfixed_const(wm->lb_request_fifo_depth - 2);
+		tolerable_latency.full = request_fifo_depth.full - tolerable_latency.full;
+		tolerable_latency.full = rfixed_mul(tolerable_latency, chunk_time);
+		tolerable_latency.full = line_time.full - tolerable_latency.full;
+	}
+	/* We assume worst case 32bits (4 bytes) */
+	wm->dbpp.full = rfixed_const(4 * 8);
+
+	/* Determine the maximum priority mark
+	 *  width = viewport width in pixels
+	 */
+	a.full = rfixed_const(16);
+	wm->priority_mark_max.full = rfixed_const(crtc->base.mode.crtc_hdisplay);
+	wm->priority_mark_max.full = rfixed_div(wm->priority_mark_max, a);
+
+	/* Determine estimated width */
+	estimated_width.full = tolerable_latency.full - wm->worst_case_latency.full;
+	estimated_width.full = rfixed_div(estimated_width, consumption_time);
+	if (rfixed_trunc(estimated_width) > crtc->base.mode.crtc_hdisplay) {
+		wm->priority_mark.full = rfixed_const(10);
+	} else {
+		a.full = rfixed_const(16);
+		wm->priority_mark.full = rfixed_div(estimated_width, a);
+		wm->priority_mark.full = wm->priority_mark_max.full - wm->priority_mark.full;
+	}
+}
+
+void rs690_bandwidth_update(struct radeon_device *rdev)
+{
+	struct drm_display_mode *mode0 = NULL;
+	struct drm_display_mode *mode1 = NULL;
+	struct rs690_watermark wm0;
+	struct rs690_watermark wm1;
+	u32 tmp;
+	fixed20_12 priority_mark02, priority_mark12, fill_rate;
+	fixed20_12 a, b;
+
+	if (rdev->mode_info.crtcs[0]->base.enabled)
+		mode0 = &rdev->mode_info.crtcs[0]->base.mode;
+	if (rdev->mode_info.crtcs[1]->base.enabled)
+		mode1 = &rdev->mode_info.crtcs[1]->base.mode;
+	/*
+	 * Set display0/1 priority up in the memory controller for
+	 * modes if the user specifies HIGH for displaypriority
+	 * option.
+	 */
+	if (rdev->disp_priority == 2) {
+		tmp = RREG32_MC(MC_INIT_MISC_LAT_TIMER);
+		tmp &= ~MC_DISP1R_INIT_LAT_MASK;
+		tmp &= ~MC_DISP0R_INIT_LAT_MASK;
+		if (mode1)
+			tmp |= (1 << MC_DISP1R_INIT_LAT_SHIFT);
+		if (mode0)
+			tmp |= (1 << MC_DISP0R_INIT_LAT_SHIFT);
+		WREG32_MC(MC_INIT_MISC_LAT_TIMER, tmp);
+	}
+	rs690_line_buffer_adjust(rdev, mode0, mode1);
+
+	if ((rdev->family == CHIP_RS690) || (rdev->family == CHIP_RS740))
+		WREG32(DCP_CONTROL, 0);
+	if ((rdev->family == CHIP_RS780) || (rdev->family == CHIP_RS880))
+		WREG32(DCP_CONTROL, 2);
+
+	rs690_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[0], &wm0);
+	rs690_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[1], &wm1);
+
+	tmp = (wm0.lb_request_fifo_depth - 1);
+	tmp |= (wm1.lb_request_fifo_depth - 1) << 16;
+	WREG32(LB_MAX_REQ_OUTSTANDING, tmp);
+
+	if (mode0 && mode1) {
+		if (rfixed_trunc(wm0.dbpp) > 64)
+			a.full = rfixed_mul(wm0.dbpp, wm0.num_line_pair);
+		else
+			a.full = wm0.num_line_pair.full;
+		if (rfixed_trunc(wm1.dbpp) > 64)
+			b.full = rfixed_mul(wm1.dbpp, wm1.num_line_pair);
+		else
+			b.full = wm1.num_line_pair.full;
+		a.full += b.full;
+		fill_rate.full = rfixed_div(wm0.sclk, a);
+		if (wm0.consumption_rate.full > fill_rate.full) {
+			b.full = wm0.consumption_rate.full - fill_rate.full;
+			b.full = rfixed_mul(b, wm0.active_time);
+			a.full = rfixed_mul(wm0.worst_case_latency,
+						wm0.consumption_rate);
+			a.full = a.full + b.full;
+			b.full = rfixed_const(16 * 1000);
+			priority_mark02.full = rfixed_div(a, b);
+		} else {
+			a.full = rfixed_mul(wm0.worst_case_latency,
+						wm0.consumption_rate);
+			b.full = rfixed_const(16 * 1000);
+			priority_mark02.full = rfixed_div(a, b);
+		}
+		if (wm1.consumption_rate.full > fill_rate.full) {
+			b.full = wm1.consumption_rate.full - fill_rate.full;
+			b.full = rfixed_mul(b, wm1.active_time);
+			a.full = rfixed_mul(wm1.worst_case_latency,
+						wm1.consumption_rate);
+			a.full = a.full + b.full;
+			b.full = rfixed_const(16 * 1000);
+			priority_mark12.full = rfixed_div(a, b);
+		} else {
+			a.full = rfixed_mul(wm1.worst_case_latency,
+						wm1.consumption_rate);
+			b.full = rfixed_const(16 * 1000);
+			priority_mark12.full = rfixed_div(a, b);
+		}
+		if (wm0.priority_mark.full > priority_mark02.full)
+			priority_mark02.full = wm0.priority_mark.full;
+		if (rfixed_trunc(priority_mark02) < 0)
+			priority_mark02.full = 0;
+		if (wm0.priority_mark_max.full > priority_mark02.full)
+			priority_mark02.full = wm0.priority_mark_max.full;
+		if (wm1.priority_mark.full > priority_mark12.full)
+			priority_mark12.full = wm1.priority_mark.full;
+		if (rfixed_trunc(priority_mark12) < 0)
+			priority_mark12.full = 0;
+		if (wm1.priority_mark_max.full > priority_mark12.full)
+			priority_mark12.full = wm1.priority_mark_max.full;
+		WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
+		WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
+		WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
+		WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+	} else if (mode0) {
+		if (rfixed_trunc(wm0.dbpp) > 64)
+			a.full = rfixed_mul(wm0.dbpp, wm0.num_line_pair);
+		else
+			a.full = wm0.num_line_pair.full;
+		fill_rate.full = rfixed_div(wm0.sclk, a);
+		if (wm0.consumption_rate.full > fill_rate.full) {
+			b.full = wm0.consumption_rate.full - fill_rate.full;
+			b.full = rfixed_mul(b, wm0.active_time);
+			a.full = rfixed_mul(wm0.worst_case_latency,
+						wm0.consumption_rate);
+			a.full = a.full + b.full;
+			b.full = rfixed_const(16 * 1000);
+			priority_mark02.full = rfixed_div(a, b);
+		} else {
+			a.full = rfixed_mul(wm0.worst_case_latency,
+						wm0.consumption_rate);
+			b.full = rfixed_const(16 * 1000);
+			priority_mark02.full = rfixed_div(a, b);
+		}
+		if (wm0.priority_mark.full > priority_mark02.full)
+			priority_mark02.full = wm0.priority_mark.full;
+		if (rfixed_trunc(priority_mark02) < 0)
+			priority_mark02.full = 0;
+		if (wm0.priority_mark_max.full > priority_mark02.full)
+			priority_mark02.full = wm0.priority_mark_max.full;
+		WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
+		WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
+		WREG32(D2MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
+		WREG32(D2MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
+	} else {
+		if (rfixed_trunc(wm1.dbpp) > 64)
+			a.full = rfixed_mul(wm1.dbpp, wm1.num_line_pair);
+		else
+			a.full = wm1.num_line_pair.full;
+		fill_rate.full = rfixed_div(wm1.sclk, a);
+		if (wm1.consumption_rate.full > fill_rate.full) {
+			b.full = wm1.consumption_rate.full - fill_rate.full;
+			b.full = rfixed_mul(b, wm1.active_time);
+			a.full = rfixed_mul(wm1.worst_case_latency,
+						wm1.consumption_rate);
+			a.full = a.full + b.full;
+			b.full = rfixed_const(16 * 1000);
+			priority_mark12.full = rfixed_div(a, b);
+		} else {
+			a.full = rfixed_mul(wm1.worst_case_latency,
+						wm1.consumption_rate);
+			b.full = rfixed_const(16 * 1000);
+			priority_mark12.full = rfixed_div(a, b);
+		}
+		if (wm1.priority_mark.full > priority_mark12.full)
+			priority_mark12.full = wm1.priority_mark.full;
+		if (rfixed_trunc(priority_mark12) < 0)
+			priority_mark12.full = 0;
+		if (wm1.priority_mark_max.full > priority_mark12.full)
+			priority_mark12.full = wm1.priority_mark_max.full;
+		WREG32(D1MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
+		WREG32(D1MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
+		WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
+		WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+	}
+}
 
 /*
  * Indirect registers accessor
diff --git a/drivers/gpu/drm/radeon/rs690r.h b/drivers/gpu/drm/radeon/rs690r.h
new file mode 100644
index 0000000..c0d9faa
--- /dev/null
+++ b/drivers/gpu/drm/radeon/rs690r.h
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#ifndef RS690R_H
+#define RS690R_H
+
+/* RS690/RS740 registers */
+#define MC_INDEX			0x0078
+#	define MC_INDEX_MASK			0x1FF
+#	define MC_INDEX_WR_EN			(1 << 9)
+#	define MC_INDEX_WR_ACK			0x7F
+#define MC_DATA				0x007C
+#define HDP_FB_LOCATION			0x0134
+#define DC_LB_MEMORY_SPLIT		0x6520
+#define		DC_LB_MEMORY_SPLIT_MASK			0x00000003
+#define		DC_LB_MEMORY_SPLIT_SHIFT		0
+#define		DC_LB_MEMORY_SPLIT_D1HALF_D2HALF	0
+#define		DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q		1
+#define		DC_LB_MEMORY_SPLIT_D1_ONLY		2
+#define		DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q		3
+#define		DC_LB_MEMORY_SPLIT_SHIFT_MODE		(1 << 2)
+#define		DC_LB_DISP1_END_ADR_SHIFT		4
+#define		DC_LB_DISP1_END_ADR_MASK		0x00007FF0
+#define D1MODE_PRIORITY_A_CNT		0x6548
+#define		MODE_PRIORITY_MARK_MASK			0x00007FFF
+#define		MODE_PRIORITY_OFF			(1 << 16)
+#define		MODE_PRIORITY_ALWAYS_ON			(1 << 20)
+#define		MODE_PRIORITY_FORCE_MASK		(1 << 24)
+#define D1MODE_PRIORITY_B_CNT		0x654C
+#define LB_MAX_REQ_OUTSTANDING		0x6D58
+#define		LB_D1_MAX_REQ_OUTSTANDING_MASK		0x0000000F
+#define		LB_D1_MAX_REQ_OUTSTANDING_SHIFT		0
+#define		LB_D2_MAX_REQ_OUTSTANDING_MASK		0x000F0000
+#define		LB_D2_MAX_REQ_OUTSTANDING_SHIFT		16
+#define DCP_CONTROL			0x6C9C
+#define D2MODE_PRIORITY_A_CNT		0x6D48
+#define D2MODE_PRIORITY_B_CNT		0x6D4C
+
+/* MC indirect registers */
+#define MC_STATUS_IDLE				(1 << 0)
+#define MC_MISC_CNTL			0x18
+#define		DISABLE_GTW			(1 << 1)
+#define		GART_INDEX_REG_EN		(1 << 12)
+#define		BLOCK_GFX_D3_EN			(1 << 14)
+#define GART_FEATURE_ID			0x2B
+#define		HANG_EN				(1 << 11)
+#define		TLB_ENABLE			(1 << 18)
+#define		P2P_ENABLE			(1 << 19)
+#define		GTW_LAC_EN			(1 << 25)
+#define		LEVEL2_GART			(0 << 30)
+#define		LEVEL1_GART			(1 << 30)
+#define		PDC_EN				(1 << 31)
+#define GART_BASE			0x2C
+#define GART_CACHE_CNTRL		0x2E
+#	define GART_CACHE_INVALIDATE		(1 << 0)
+#define MC_STATUS			0x90
+#define MCCFG_FB_LOCATION		0x100
+#define		MC_FB_START_MASK		0x0000FFFF
+#define		MC_FB_START_SHIFT		0
+#define		MC_FB_TOP_MASK			0xFFFF0000
+#define		MC_FB_TOP_SHIFT			16
+#define MCCFG_AGP_LOCATION		0x101
+#define		MC_AGP_START_MASK		0x0000FFFF
+#define		MC_AGP_START_SHIFT		0
+#define		MC_AGP_TOP_MASK			0xFFFF0000
+#define		MC_AGP_TOP_SHIFT		16
+#define MCCFG_AGP_BASE			0x102
+#define MCCFG_AGP_BASE_2		0x103
+#define MC_INIT_MISC_LAT_TIMER		0x104
+#define		MC_DISP0R_INIT_LAT_SHIFT	8
+#define		MC_DISP0R_INIT_LAT_MASK		0x00000F00
+#define		MC_DISP1R_INIT_LAT_SHIFT	12
+#define		MC_DISP1R_INIT_LAT_MASK		0x0000F000
+
+#endif
diff --git a/drivers/gpu/drm/radeon/rv515.c b/drivers/gpu/drm/radeon/rv515.c
index ffea37b..551e608 100644
--- a/drivers/gpu/drm/radeon/rv515.c
+++ b/drivers/gpu/drm/radeon/rv515.c
@@ -27,8 +27,9 @@
  */
 #include <linux/seq_file.h>
 #include "drmP.h"
-#include "radeon_reg.h"
+#include "rv515r.h"
 #include "radeon.h"
+#include "radeon_share.h"
 
 /* rv515 depends on : */
 void r100_hdp_reset(struct radeon_device *rdev);
@@ -99,26 +100,26 @@ int rv515_mc_init(struct radeon_device *rdev)
 		       "programming pipes. Bad things might happen.\n");
 	}
 	/* Write VRAM size in case we are limiting it */
-	WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.vram_size);
-	tmp = REG_SET(RV515_MC_FB_START, rdev->mc.vram_location >> 16);
+	WREG32(RADEON_CONFIG_MEMSIZE, rdev->mc.real_vram_size);
+	tmp = REG_SET(MC_FB_START, rdev->mc.vram_location >> 16);
 	WREG32(0x134, tmp);
-	tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
-	tmp = REG_SET(RV515_MC_FB_TOP, tmp >> 16);
-	tmp |= REG_SET(RV515_MC_FB_START, rdev->mc.vram_location >> 16);
-	WREG32_MC(RV515_MC_FB_LOCATION, tmp);
-	WREG32(RS690_HDP_FB_LOCATION, rdev->mc.vram_location >> 16);
+	tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
+	tmp = REG_SET(MC_FB_TOP, tmp >> 16);
+	tmp |= REG_SET(MC_FB_START, rdev->mc.vram_location >> 16);
+	WREG32_MC(MC_FB_LOCATION, tmp);
+	WREG32(HDP_FB_LOCATION, rdev->mc.vram_location >> 16);
 	WREG32(0x310, rdev->mc.vram_location);
 	if (rdev->flags & RADEON_IS_AGP) {
 		tmp = rdev->mc.gtt_location + rdev->mc.gtt_size - 1;
-		tmp = REG_SET(RV515_MC_AGP_TOP, tmp >> 16);
-		tmp |= REG_SET(RV515_MC_AGP_START, rdev->mc.gtt_location >> 16);
-		WREG32_MC(RV515_MC_AGP_LOCATION, tmp);
-		WREG32_MC(RV515_MC_AGP_BASE, rdev->mc.agp_base);
-		WREG32_MC(RV515_MC_AGP_BASE_2, 0);
+		tmp = REG_SET(MC_AGP_TOP, tmp >> 16);
+		tmp |= REG_SET(MC_AGP_START, rdev->mc.gtt_location >> 16);
+		WREG32_MC(MC_AGP_LOCATION, tmp);
+		WREG32_MC(MC_AGP_BASE, rdev->mc.agp_base);
+		WREG32_MC(MC_AGP_BASE_2, 0);
 	} else {
-		WREG32_MC(RV515_MC_AGP_LOCATION, 0x0FFFFFFF);
-		WREG32_MC(RV515_MC_AGP_BASE, 0);
-		WREG32_MC(RV515_MC_AGP_BASE_2, 0);
+		WREG32_MC(MC_AGP_LOCATION, 0x0FFFFFFF);
+		WREG32_MC(MC_AGP_BASE, 0);
+		WREG32_MC(MC_AGP_BASE_2, 0);
 	}
 	return 0;
 }
@@ -136,95 +137,67 @@ void rv515_mc_fini(struct radeon_device *rdev)
  */
 void rv515_ring_start(struct radeon_device *rdev)
 {
-	unsigned gb_tile_config;
 	int r;
 
-	/* Sub pixel 1/12 so we can have 4K rendering according to doc */
-	gb_tile_config = R300_ENABLE_TILING | R300_TILE_SIZE_16;
-	switch (rdev->num_gb_pipes) {
-	case 2:
-		gb_tile_config |= R300_PIPE_COUNT_R300;
-		break;
-	case 3:
-		gb_tile_config |= R300_PIPE_COUNT_R420_3P;
-		break;
-	case 4:
-		gb_tile_config |= R300_PIPE_COUNT_R420;
-		break;
-	case 1:
-	default:
-		gb_tile_config |= R300_PIPE_COUNT_RV350;
-		break;
-	}
-
 	r = radeon_ring_lock(rdev, 64);
 	if (r) {
 		return;
 	}
-	radeon_ring_write(rdev, PACKET0(RADEON_ISYNC_CNTL, 0));
-	radeon_ring_write(rdev,
-			  RADEON_ISYNC_ANY2D_IDLE3D |
-			  RADEON_ISYNC_ANY3D_IDLE2D |
-			  RADEON_ISYNC_WAIT_IDLEGUI |
-			  RADEON_ISYNC_CPSCRATCH_IDLEGUI);
-	radeon_ring_write(rdev, PACKET0(R300_GB_TILE_CONFIG, 0));
-	radeon_ring_write(rdev, gb_tile_config);
-	radeon_ring_write(rdev, PACKET0(RADEON_WAIT_UNTIL, 0));
+	radeon_ring_write(rdev, PACKET0(ISYNC_CNTL, 0));
 	radeon_ring_write(rdev,
-			  RADEON_WAIT_2D_IDLECLEAN |
-			  RADEON_WAIT_3D_IDLECLEAN);
+			  ISYNC_ANY2D_IDLE3D |
+			  ISYNC_ANY3D_IDLE2D |
+			  ISYNC_WAIT_IDLEGUI |
+			  ISYNC_CPSCRATCH_IDLEGUI);
+	radeon_ring_write(rdev, PACKET0(WAIT_UNTIL, 0));
+	radeon_ring_write(rdev, WAIT_2D_IDLECLEAN | WAIT_3D_IDLECLEAN);
 	radeon_ring_write(rdev, PACKET0(0x170C, 0));
 	radeon_ring_write(rdev, 1 << 31);
-	radeon_ring_write(rdev, PACKET0(R300_GB_SELECT, 0));
+	radeon_ring_write(rdev, PACKET0(GB_SELECT, 0));
 	radeon_ring_write(rdev, 0);
-	radeon_ring_write(rdev, PACKET0(R300_GB_ENABLE, 0));
+	radeon_ring_write(rdev, PACKET0(GB_ENABLE, 0));
 	radeon_ring_write(rdev, 0);
 	radeon_ring_write(rdev, PACKET0(0x42C8, 0));
 	radeon_ring_write(rdev, (1 << rdev->num_gb_pipes) - 1);
-	radeon_ring_write(rdev, PACKET0(R500_VAP_INDEX_OFFSET, 0));
+	radeon_ring_write(rdev, PACKET0(VAP_INDEX_OFFSET, 0));
 	radeon_ring_write(rdev, 0);
-	radeon_ring_write(rdev, PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
-	radeon_ring_write(rdev, R300_RB3D_DC_FLUSH | R300_RB3D_DC_FREE);
-	radeon_ring_write(rdev, PACKET0(R300_RB3D_ZCACHE_CTLSTAT, 0));
-	radeon_ring_write(rdev, R300_ZC_FLUSH | R300_ZC_FREE);
-	radeon_ring_write(rdev, PACKET0(RADEON_WAIT_UNTIL, 0));
-	radeon_ring_write(rdev,
-			  RADEON_WAIT_2D_IDLECLEAN |
-			  RADEON_WAIT_3D_IDLECLEAN);
-	radeon_ring_write(rdev, PACKET0(R300_GB_AA_CONFIG, 0));
+	radeon_ring_write(rdev, PACKET0(RB3D_DSTCACHE_CTLSTAT, 0));
+	radeon_ring_write(rdev, RB3D_DC_FLUSH | RB3D_DC_FREE);
+	radeon_ring_write(rdev, PACKET0(ZB_ZCACHE_CTLSTAT, 0));
+	radeon_ring_write(rdev, ZC_FLUSH | ZC_FREE);
+	radeon_ring_write(rdev, PACKET0(WAIT_UNTIL, 0));
+	radeon_ring_write(rdev, WAIT_2D_IDLECLEAN | WAIT_3D_IDLECLEAN);
+	radeon_ring_write(rdev, PACKET0(GB_AA_CONFIG, 0));
 	radeon_ring_write(rdev, 0);
-	radeon_ring_write(rdev, PACKET0(R300_RB3D_DSTCACHE_CTLSTAT, 0));
-	radeon_ring_write(rdev, R300_RB3D_DC_FLUSH | R300_RB3D_DC_FREE);
-	radeon_ring_write(rdev, PACKET0(R300_RB3D_ZCACHE_CTLSTAT, 0));
-	radeon_ring_write(rdev, R300_ZC_FLUSH | R300_ZC_FREE);
-	radeon_ring_write(rdev, PACKET0(R300_GB_MSPOS0, 0));
-	radeon_ring_write(rdev,
-			  ((6 << R300_MS_X0_SHIFT) |
-			   (6 << R300_MS_Y0_SHIFT) |
-			   (6 << R300_MS_X1_SHIFT) |
-			   (6 << R300_MS_Y1_SHIFT) |
-			   (6 << R300_MS_X2_SHIFT) |
-			   (6 << R300_MS_Y2_SHIFT) |
-			   (6 << R300_MSBD0_Y_SHIFT) |
-			   (6 << R300_MSBD0_X_SHIFT)));
-	radeon_ring_write(rdev, PACKET0(R300_GB_MSPOS1, 0));
+	radeon_ring_write(rdev, PACKET0(RB3D_DSTCACHE_CTLSTAT, 0));
+	radeon_ring_write(rdev, RB3D_DC_FLUSH | RB3D_DC_FREE);
+	radeon_ring_write(rdev, PACKET0(ZB_ZCACHE_CTLSTAT, 0));
+	radeon_ring_write(rdev, ZC_FLUSH | ZC_FREE);
+	radeon_ring_write(rdev, PACKET0(GB_MSPOS0, 0));
 	radeon_ring_write(rdev,
-			  ((6 << R300_MS_X3_SHIFT) |
-			   (6 << R300_MS_Y3_SHIFT) |
-			   (6 << R300_MS_X4_SHIFT) |
-			   (6 << R300_MS_Y4_SHIFT) |
-			   (6 << R300_MS_X5_SHIFT) |
-			   (6 << R300_MS_Y5_SHIFT) |
-			   (6 << R300_MSBD1_SHIFT)));
-	radeon_ring_write(rdev, PACKET0(R300_GA_ENHANCE, 0));
-	radeon_ring_write(rdev, R300_GA_DEADLOCK_CNTL | R300_GA_FASTSYNC_CNTL);
-	radeon_ring_write(rdev, PACKET0(R300_GA_POLY_MODE, 0));
+			  ((6 << MS_X0_SHIFT) |
+			   (6 << MS_Y0_SHIFT) |
+			   (6 << MS_X1_SHIFT) |
+			   (6 << MS_Y1_SHIFT) |
+			   (6 << MS_X2_SHIFT) |
+			   (6 << MS_Y2_SHIFT) |
+			   (6 << MSBD0_Y_SHIFT) |
+			   (6 << MSBD0_X_SHIFT)));
+	radeon_ring_write(rdev, PACKET0(GB_MSPOS1, 0));
 	radeon_ring_write(rdev,
-			  R300_FRONT_PTYPE_TRIANGE | R300_BACK_PTYPE_TRIANGE);
-	radeon_ring_write(rdev, PACKET0(R300_GA_ROUND_MODE, 0));
-	radeon_ring_write(rdev,
-			  R300_GEOMETRY_ROUND_NEAREST |
-			  R300_COLOR_ROUND_NEAREST);
+			  ((6 << MS_X3_SHIFT) |
+			   (6 << MS_Y3_SHIFT) |
+			   (6 << MS_X4_SHIFT) |
+			   (6 << MS_Y4_SHIFT) |
+			   (6 << MS_X5_SHIFT) |
+			   (6 << MS_Y5_SHIFT) |
+			   (6 << MSBD1_SHIFT)));
+	radeon_ring_write(rdev, PACKET0(GA_ENHANCE, 0));
+	radeon_ring_write(rdev, GA_DEADLOCK_CNTL | GA_FASTSYNC_CNTL);
+	radeon_ring_write(rdev, PACKET0(GA_POLY_MODE, 0));
+	radeon_ring_write(rdev, FRONT_PTYPE_TRIANGE | BACK_PTYPE_TRIANGE);
+	radeon_ring_write(rdev, PACKET0(GA_ROUND_MODE, 0));
+	radeon_ring_write(rdev, GEOMETRY_ROUND_NEAREST | COLOR_ROUND_NEAREST);
 	radeon_ring_write(rdev, PACKET0(0x20C8, 0));
 	radeon_ring_write(rdev, 0);
 	radeon_ring_unlock_commit(rdev);
@@ -242,8 +215,8 @@ int rv515_mc_wait_for_idle(struct radeon_device *rdev)
 
 	for (i = 0; i < rdev->usec_timeout; i++) {
 		/* read MC_STATUS */
-		tmp = RREG32_MC(RV515_MC_STATUS);
-		if (tmp & RV515_MC_STATUS_IDLE) {
+		tmp = RREG32_MC(MC_STATUS);
+		if (tmp & MC_STATUS_IDLE) {
 			return 0;
 		}
 		DRM_UDELAY(1);
@@ -291,33 +264,33 @@ int rv515_ga_reset(struct radeon_device *rdev)
 	reinit_cp = rdev->cp.ready;
 	rdev->cp.ready = false;
 	for (i = 0; i < rdev->usec_timeout; i++) {
-		WREG32(RADEON_CP_CSQ_MODE, 0);
-		WREG32(RADEON_CP_CSQ_CNTL, 0);
-		WREG32(RADEON_RBBM_SOFT_RESET, 0x32005);
-		(void)RREG32(RADEON_RBBM_SOFT_RESET);
+		WREG32(CP_CSQ_MODE, 0);
+		WREG32(CP_CSQ_CNTL, 0);
+		WREG32(RBBM_SOFT_RESET, 0x32005);
+		(void)RREG32(RBBM_SOFT_RESET);
 		udelay(200);
-		WREG32(RADEON_RBBM_SOFT_RESET, 0);
+		WREG32(RBBM_SOFT_RESET, 0);
 		/* Wait to prevent race in RBBM_STATUS */
 		mdelay(1);
-		tmp = RREG32(RADEON_RBBM_STATUS);
+		tmp = RREG32(RBBM_STATUS);
 		if (tmp & ((1 << 20) | (1 << 26))) {
 			DRM_ERROR("VAP & CP still busy (RBBM_STATUS=0x%08X)\n", tmp);
 			/* GA still busy soft reset it */
 			WREG32(0x429C, 0x200);
-			WREG32(R300_VAP_PVS_STATE_FLUSH_REG, 0);
+			WREG32(VAP_PVS_STATE_FLUSH_REG, 0);
 			WREG32(0x43E0, 0);
 			WREG32(0x43E4, 0);
 			WREG32(0x24AC, 0);
 		}
 		/* Wait to prevent race in RBBM_STATUS */
 		mdelay(1);
-		tmp = RREG32(RADEON_RBBM_STATUS);
+		tmp = RREG32(RBBM_STATUS);
 		if (!(tmp & ((1 << 20) | (1 << 26)))) {
 			break;
 		}
 	}
 	for (i = 0; i < rdev->usec_timeout; i++) {
-		tmp = RREG32(RADEON_RBBM_STATUS);
+		tmp = RREG32(RBBM_STATUS);
 		if (!(tmp & ((1 << 20) | (1 << 26)))) {
 			DRM_INFO("GA reset succeed (RBBM_STATUS=0x%08X)\n",
 				 tmp);
@@ -331,7 +304,7 @@ int rv515_ga_reset(struct radeon_device *rdev)
 		}
 		DRM_UDELAY(1);
 	}
-	tmp = RREG32(RADEON_RBBM_STATUS);
+	tmp = RREG32(RBBM_STATUS);
 	DRM_ERROR("Failed to reset GA ! (RBBM_STATUS=0x%08X)\n", tmp);
 	return -1;
 }
@@ -341,7 +314,7 @@ int rv515_gpu_reset(struct radeon_device *rdev)
 	uint32_t status;
 
 	/* reset order likely matter */
-	status = RREG32(RADEON_RBBM_STATUS);
+	status = RREG32(RBBM_STATUS);
 	/* reset HDP */
 	r100_hdp_reset(rdev);
 	/* reset rb2d */
@@ -353,12 +326,12 @@ int rv515_gpu_reset(struct radeon_device *rdev)
 		rv515_ga_reset(rdev);
 	}
 	/* reset CP */
-	status = RREG32(RADEON_RBBM_STATUS);
+	status = RREG32(RBBM_STATUS);
 	if (status & (1 << 16)) {
 		r100_cp_reset(rdev);
 	}
 	/* Check if GPU is idle */
-	status = RREG32(RADEON_RBBM_STATUS);
+	status = RREG32(RBBM_STATUS);
 	if (status & (1 << 31)) {
 		DRM_ERROR("Failed to reset GPU (RBBM_STATUS=0x%08X)\n", status);
 		return -1;
@@ -377,8 +350,7 @@ static void rv515_vram_get_type(struct radeon_device *rdev)
 
 	rdev->mc.vram_width = 128;
 	rdev->mc.vram_is_ddr = true;
-	tmp = RREG32_MC(RV515_MC_CNTL);
-	tmp &= RV515_MEM_NUM_CHANNELS_MASK;
+	tmp = RREG32_MC(RV515_MC_CNTL) & MEM_NUM_CHANNELS_MASK;
 	switch (tmp) {
 	case 0:
 		rdev->mc.vram_width = 64;
@@ -394,11 +366,16 @@ static void rv515_vram_get_type(struct radeon_device *rdev)
 
 void rv515_vram_info(struct radeon_device *rdev)
 {
+	fixed20_12 a;
+
 	rv515_vram_get_type(rdev);
-	rdev->mc.vram_size = RREG32(RADEON_CONFIG_MEMSIZE);
 
-	rdev->mc.aper_base = drm_get_resource_start(rdev->ddev, 0);
-	rdev->mc.aper_size = drm_get_resource_len(rdev->ddev, 0);
+	/* FIXME: we should enforce default clock in case GPU is not in
+	 * default setup
+	 */
+	a.full = rfixed_const(100);
+	rdev->pm.sclk.full = rfixed_const(rdev->clock.default_sclk);
+	rdev->pm.sclk.full = rfixed_div(rdev->pm.sclk, a);
 }
 
 
@@ -409,35 +386,35 @@ uint32_t rv515_mc_rreg(struct radeon_device *rdev, uint32_t reg)
 {
 	uint32_t r;
 
-	WREG32(R520_MC_IND_INDEX, 0x7f0000 | (reg & 0xffff));
-	r = RREG32(R520_MC_IND_DATA);
-	WREG32(R520_MC_IND_INDEX, 0);
+	WREG32(MC_IND_INDEX, 0x7f0000 | (reg & 0xffff));
+	r = RREG32(MC_IND_DATA);
+	WREG32(MC_IND_INDEX, 0);
 	return r;
 }
 
 void rv515_mc_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
 {
-	WREG32(R520_MC_IND_INDEX, 0xff0000 | ((reg) & 0xffff));
-	WREG32(R520_MC_IND_DATA, (v));
-	WREG32(R520_MC_IND_INDEX, 0);
+	WREG32(MC_IND_INDEX, 0xff0000 | ((reg) & 0xffff));
+	WREG32(MC_IND_DATA, (v));
+	WREG32(MC_IND_INDEX, 0);
 }
 
 uint32_t rv515_pcie_rreg(struct radeon_device *rdev, uint32_t reg)
 {
 	uint32_t r;
 
-	WREG32(RADEON_PCIE_INDEX, ((reg) & 0x7ff));
-	(void)RREG32(RADEON_PCIE_INDEX);
-	r = RREG32(RADEON_PCIE_DATA);
+	WREG32(PCIE_INDEX, ((reg) & 0x7ff));
+	(void)RREG32(PCIE_INDEX);
+	r = RREG32(PCIE_DATA);
 	return r;
 }
 
 void rv515_pcie_wreg(struct radeon_device *rdev, uint32_t reg, uint32_t v)
 {
-	WREG32(RADEON_PCIE_INDEX, ((reg) & 0x7ff));
-	(void)RREG32(RADEON_PCIE_INDEX);
-	WREG32(RADEON_PCIE_DATA, (v));
-	(void)RREG32(RADEON_PCIE_DATA);
+	WREG32(PCIE_INDEX, ((reg) & 0x7ff));
+	(void)RREG32(PCIE_INDEX);
+	WREG32(PCIE_DATA, (v));
+	(void)RREG32(PCIE_DATA);
 }
 
 
@@ -452,13 +429,13 @@ static int rv515_debugfs_pipes_info(struct seq_file *m, void *data)
 	struct radeon_device *rdev = dev->dev_private;
 	uint32_t tmp;
 
-	tmp = RREG32(R400_GB_PIPE_SELECT);
+	tmp = RREG32(GB_PIPE_SELECT);
 	seq_printf(m, "GB_PIPE_SELECT 0x%08x\n", tmp);
-	tmp = RREG32(R500_SU_REG_DEST);
+	tmp = RREG32(SU_REG_DEST);
 	seq_printf(m, "SU_REG_DEST 0x%08x\n", tmp);
-	tmp = RREG32(R300_GB_TILE_CONFIG);
+	tmp = RREG32(GB_TILE_CONFIG);
 	seq_printf(m, "GB_TILE_CONFIG 0x%08x\n", tmp);
-	tmp = RREG32(R300_DST_PIPE_CONFIG);
+	tmp = RREG32(DST_PIPE_CONFIG);
 	seq_printf(m, "DST_PIPE_CONFIG 0x%08x\n", tmp);
 	return 0;
 }
@@ -509,9 +486,9 @@ int rv515_debugfs_ga_info_init(struct radeon_device *rdev)
 /*
  * Asic initialization
  */
-static const unsigned r500_reg_safe_bm[159] = {
+static const unsigned r500_reg_safe_bm[219] = {
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
-	0xFFFFFFBF, 0xFFFFFFFF, 0xFFFFFFBF, 0xFFFFFFFF,
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
@@ -549,14 +526,575 @@ static const unsigned r500_reg_safe_bm[159] = {
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
 	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFF80FFFF,
 	0x00000000, 0x00000000, 0x00000000, 0x00000000,
-	0x0003FC01, 0x3FFFFCF8, 0xFE800B19,
+	0x0003FC01, 0x3FFFFCF8, 0xFE800B19, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
+	0xFFFFFFFF, 0xFFFFFFFF, 0xFFFFFFFF,
 };
 
-
-
 int rv515_init(struct radeon_device *rdev)
 {
 	rdev->config.r300.reg_safe_bm = r500_reg_safe_bm;
 	rdev->config.r300.reg_safe_bm_size = ARRAY_SIZE(r500_reg_safe_bm);
 	return 0;
 }
+
+void atom_rv515_force_tv_scaler(struct radeon_device *rdev)
+{
+
+	WREG32(0x659C, 0x0);
+	WREG32(0x6594, 0x705);
+	WREG32(0x65A4, 0x10001);
+	WREG32(0x65D8, 0x0);
+	WREG32(0x65B0, 0x0);
+	WREG32(0x65C0, 0x0);
+	WREG32(0x65D4, 0x0);
+	WREG32(0x6578, 0x0);
+	WREG32(0x657C, 0x841880A8);
+	WREG32(0x6578, 0x1);
+	WREG32(0x657C, 0x84208680);
+	WREG32(0x6578, 0x2);
+	WREG32(0x657C, 0xBFF880B0);
+	WREG32(0x6578, 0x100);
+	WREG32(0x657C, 0x83D88088);
+	WREG32(0x6578, 0x101);
+	WREG32(0x657C, 0x84608680);
+	WREG32(0x6578, 0x102);
+	WREG32(0x657C, 0xBFF080D0);
+	WREG32(0x6578, 0x200);
+	WREG32(0x657C, 0x83988068);
+	WREG32(0x6578, 0x201);
+	WREG32(0x657C, 0x84A08680);
+	WREG32(0x6578, 0x202);
+	WREG32(0x657C, 0xBFF080F8);
+	WREG32(0x6578, 0x300);
+	WREG32(0x657C, 0x83588058);
+	WREG32(0x6578, 0x301);
+	WREG32(0x657C, 0x84E08660);
+	WREG32(0x6578, 0x302);
+	WREG32(0x657C, 0xBFF88120);
+	WREG32(0x6578, 0x400);
+	WREG32(0x657C, 0x83188040);
+	WREG32(0x6578, 0x401);
+	WREG32(0x657C, 0x85008660);
+	WREG32(0x6578, 0x402);
+	WREG32(0x657C, 0xBFF88150);
+	WREG32(0x6578, 0x500);
+	WREG32(0x657C, 0x82D88030);
+	WREG32(0x6578, 0x501);
+	WREG32(0x657C, 0x85408640);
+	WREG32(0x6578, 0x502);
+	WREG32(0x657C, 0xBFF88180);
+	WREG32(0x6578, 0x600);
+	WREG32(0x657C, 0x82A08018);
+	WREG32(0x6578, 0x601);
+	WREG32(0x657C, 0x85808620);
+	WREG32(0x6578, 0x602);
+	WREG32(0x657C, 0xBFF081B8);
+	WREG32(0x6578, 0x700);
+	WREG32(0x657C, 0x82608010);
+	WREG32(0x6578, 0x701);
+	WREG32(0x657C, 0x85A08600);
+	WREG32(0x6578, 0x702);
+	WREG32(0x657C, 0x800081F0);
+	WREG32(0x6578, 0x800);
+	WREG32(0x657C, 0x8228BFF8);
+	WREG32(0x6578, 0x801);
+	WREG32(0x657C, 0x85E085E0);
+	WREG32(0x6578, 0x802);
+	WREG32(0x657C, 0xBFF88228);
+	WREG32(0x6578, 0x10000);
+	WREG32(0x657C, 0x82A8BF00);
+	WREG32(0x6578, 0x10001);
+	WREG32(0x657C, 0x82A08CC0);
+	WREG32(0x6578, 0x10002);
+	WREG32(0x657C, 0x8008BEF8);
+	WREG32(0x6578, 0x10100);
+	WREG32(0x657C, 0x81F0BF28);
+	WREG32(0x6578, 0x10101);
+	WREG32(0x657C, 0x83608CA0);
+	WREG32(0x6578, 0x10102);
+	WREG32(0x657C, 0x8018BED0);
+	WREG32(0x6578, 0x10200);
+	WREG32(0x657C, 0x8148BF38);
+	WREG32(0x6578, 0x10201);
+	WREG32(0x657C, 0x84408C80);
+	WREG32(0x6578, 0x10202);
+	WREG32(0x657C, 0x8008BEB8);
+	WREG32(0x6578, 0x10300);
+	WREG32(0x657C, 0x80B0BF78);
+	WREG32(0x6578, 0x10301);
+	WREG32(0x657C, 0x85008C20);
+	WREG32(0x6578, 0x10302);
+	WREG32(0x657C, 0x8020BEA0);
+	WREG32(0x6578, 0x10400);
+	WREG32(0x657C, 0x8028BF90);
+	WREG32(0x6578, 0x10401);
+	WREG32(0x657C, 0x85E08BC0);
+	WREG32(0x6578, 0x10402);
+	WREG32(0x657C, 0x8018BE90);
+	WREG32(0x6578, 0x10500);
+	WREG32(0x657C, 0xBFB8BFB0);
+	WREG32(0x6578, 0x10501);
+	WREG32(0x657C, 0x86C08B40);
+	WREG32(0x6578, 0x10502);
+	WREG32(0x657C, 0x8010BE90);
+	WREG32(0x6578, 0x10600);
+	WREG32(0x657C, 0xBF58BFC8);
+	WREG32(0x6578, 0x10601);
+	WREG32(0x657C, 0x87A08AA0);
+	WREG32(0x6578, 0x10602);
+	WREG32(0x657C, 0x8010BE98);
+	WREG32(0x6578, 0x10700);
+	WREG32(0x657C, 0xBF10BFF0);
+	WREG32(0x6578, 0x10701);
+	WREG32(0x657C, 0x886089E0);
+	WREG32(0x6578, 0x10702);
+	WREG32(0x657C, 0x8018BEB0);
+	WREG32(0x6578, 0x10800);
+	WREG32(0x657C, 0xBED8BFE8);
+	WREG32(0x6578, 0x10801);
+	WREG32(0x657C, 0x89408940);
+	WREG32(0x6578, 0x10802);
+	WREG32(0x657C, 0xBFE8BED8);
+	WREG32(0x6578, 0x20000);
+	WREG32(0x657C, 0x80008000);
+	WREG32(0x6578, 0x20001);
+	WREG32(0x657C, 0x90008000);
+	WREG32(0x6578, 0x20002);
+	WREG32(0x657C, 0x80008000);
+	WREG32(0x6578, 0x20003);
+	WREG32(0x657C, 0x80008000);
+	WREG32(0x6578, 0x20100);
+	WREG32(0x657C, 0x80108000);
+	WREG32(0x6578, 0x20101);
+	WREG32(0x657C, 0x8FE0BF70);
+	WREG32(0x6578, 0x20102);
+	WREG32(0x657C, 0xBFE880C0);
+	WREG32(0x6578, 0x20103);
+	WREG32(0x657C, 0x80008000);
+	WREG32(0x6578, 0x20200);
+	WREG32(0x657C, 0x8018BFF8);
+	WREG32(0x6578, 0x20201);
+	WREG32(0x657C, 0x8F80BF08);
+	WREG32(0x6578, 0x20202);
+	WREG32(0x657C, 0xBFD081A0);
+	WREG32(0x6578, 0x20203);
+	WREG32(0x657C, 0xBFF88000);
+	WREG32(0x6578, 0x20300);
+	WREG32(0x657C, 0x80188000);
+	WREG32(0x6578, 0x20301);
+	WREG32(0x657C, 0x8EE0BEC0);
+	WREG32(0x6578, 0x20302);
+	WREG32(0x657C, 0xBFB082A0);
+	WREG32(0x6578, 0x20303);
+	WREG32(0x657C, 0x80008000);
+	WREG32(0x6578, 0x20400);
+	WREG32(0x657C, 0x80188000);
+	WREG32(0x6578, 0x20401);
+	WREG32(0x657C, 0x8E00BEA0);
+	WREG32(0x6578, 0x20402);
+	WREG32(0x657C, 0xBF8883C0);
+	WREG32(0x6578, 0x20403);
+	WREG32(0x657C, 0x80008000);
+	WREG32(0x6578, 0x20500);
+	WREG32(0x657C, 0x80188000);
+	WREG32(0x6578, 0x20501);
+	WREG32(0x657C, 0x8D00BE90);
+	WREG32(0x6578, 0x20502);
+	WREG32(0x657C, 0xBF588500);
+	WREG32(0x6578, 0x20503);
+	WREG32(0x657C, 0x80008008);
+	WREG32(0x6578, 0x20600);
+	WREG32(0x657C, 0x80188000);
+	WREG32(0x6578, 0x20601);
+	WREG32(0x657C, 0x8BC0BE98);
+	WREG32(0x6578, 0x20602);
+	WREG32(0x657C, 0xBF308660);
+	WREG32(0x6578, 0x20603);
+	WREG32(0x657C, 0x80008008);
+	WREG32(0x6578, 0x20700);
+	WREG32(0x657C, 0x80108000);
+	WREG32(0x6578, 0x20701);
+	WREG32(0x657C, 0x8A80BEB0);
+	WREG32(0x6578, 0x20702);
+	WREG32(0x657C, 0xBF0087C0);
+	WREG32(0x6578, 0x20703);
+	WREG32(0x657C, 0x80008008);
+	WREG32(0x6578, 0x20800);
+	WREG32(0x657C, 0x80108000);
+	WREG32(0x6578, 0x20801);
+	WREG32(0x657C, 0x8920BED0);
+	WREG32(0x6578, 0x20802);
+	WREG32(0x657C, 0xBED08920);
+	WREG32(0x6578, 0x20803);
+	WREG32(0x657C, 0x80008010);
+	WREG32(0x6578, 0x30000);
+	WREG32(0x657C, 0x90008000);
+	WREG32(0x6578, 0x30001);
+	WREG32(0x657C, 0x80008000);
+	WREG32(0x6578, 0x30100);
+	WREG32(0x657C, 0x8FE0BF90);
+	WREG32(0x6578, 0x30101);
+	WREG32(0x657C, 0xBFF880A0);
+	WREG32(0x6578, 0x30200);
+	WREG32(0x657C, 0x8F60BF40);
+	WREG32(0x6578, 0x30201);
+	WREG32(0x657C, 0xBFE88180);
+	WREG32(0x6578, 0x30300);
+	WREG32(0x657C, 0x8EC0BF00);
+	WREG32(0x6578, 0x30301);
+	WREG32(0x657C, 0xBFC88280);
+	WREG32(0x6578, 0x30400);
+	WREG32(0x657C, 0x8DE0BEE0);
+	WREG32(0x6578, 0x30401);
+	WREG32(0x657C, 0xBFA083A0);
+	WREG32(0x6578, 0x30500);
+	WREG32(0x657C, 0x8CE0BED0);
+	WREG32(0x6578, 0x30501);
+	WREG32(0x657C, 0xBF7884E0);
+	WREG32(0x6578, 0x30600);
+	WREG32(0x657C, 0x8BA0BED8);
+	WREG32(0x6578, 0x30601);
+	WREG32(0x657C, 0xBF508640);
+	WREG32(0x6578, 0x30700);
+	WREG32(0x657C, 0x8A60BEE8);
+	WREG32(0x6578, 0x30701);
+	WREG32(0x657C, 0xBF2087A0);
+	WREG32(0x6578, 0x30800);
+	WREG32(0x657C, 0x8900BF00);
+	WREG32(0x6578, 0x30801);
+	WREG32(0x657C, 0xBF008900);
+}
+
+struct rv515_watermark {
+	u32        lb_request_fifo_depth;
+	fixed20_12 num_line_pair;
+	fixed20_12 estimated_width;
+	fixed20_12 worst_case_latency;
+	fixed20_12 consumption_rate;
+	fixed20_12 active_time;
+	fixed20_12 dbpp;
+	fixed20_12 priority_mark_max;
+	fixed20_12 priority_mark;
+	fixed20_12 sclk;
+};
+
+void rv515_crtc_bandwidth_compute(struct radeon_device *rdev,
+				  struct radeon_crtc *crtc,
+				  struct rv515_watermark *wm)
+{
+	struct drm_display_mode *mode = &crtc->base.mode;
+	fixed20_12 a, b, c;
+	fixed20_12 pclk, request_fifo_depth, tolerable_latency, estimated_width;
+	fixed20_12 consumption_time, line_time, chunk_time, read_delay_latency;
+
+	if (!crtc->base.enabled) {
+		/* FIXME: wouldn't it better to set priority mark to maximum */
+		wm->lb_request_fifo_depth = 4;
+		return;
+	}
+
+	if (crtc->vsc.full > rfixed_const(2))
+		wm->num_line_pair.full = rfixed_const(2);
+	else
+		wm->num_line_pair.full = rfixed_const(1);
+
+	b.full = rfixed_const(mode->crtc_hdisplay);
+	c.full = rfixed_const(256);
+	a.full = rfixed_mul(wm->num_line_pair, b);
+	request_fifo_depth.full = rfixed_div(a, c);
+	if (a.full < rfixed_const(4)) {
+		wm->lb_request_fifo_depth = 4;
+	} else {
+		wm->lb_request_fifo_depth = rfixed_trunc(request_fifo_depth);
+	}
+
+	/* Determine consumption rate
+	 *  pclk = pixel clock period(ns) = 1000 / (mode.clock / 1000)
+	 *  vtaps = number of vertical taps,
+	 *  vsc = vertical scaling ratio, defined as source/destination
+	 *  hsc = horizontal scaling ration, defined as source/destination
+	 */
+	a.full = rfixed_const(mode->clock);
+	b.full = rfixed_const(1000);
+	a.full = rfixed_div(a, b);
+	pclk.full = rfixed_div(b, a);
+	if (crtc->rmx_type != RMX_OFF) {
+		b.full = rfixed_const(2);
+		if (crtc->vsc.full > b.full)
+			b.full = crtc->vsc.full;
+		b.full = rfixed_mul(b, crtc->hsc);
+		c.full = rfixed_const(2);
+		b.full = rfixed_div(b, c);
+		consumption_time.full = rfixed_div(pclk, b);
+	} else {
+		consumption_time.full = pclk.full;
+	}
+	a.full = rfixed_const(1);
+	wm->consumption_rate.full = rfixed_div(a, consumption_time);
+
+
+	/* Determine line time
+	 *  LineTime = total time for one line of displayhtotal
+	 *  LineTime = total number of horizontal pixels
+	 *  pclk = pixel clock period(ns)
+	 */
+	a.full = rfixed_const(crtc->base.mode.crtc_htotal);
+	line_time.full = rfixed_mul(a, pclk);
+
+	/* Determine active time
+	 *  ActiveTime = time of active region of display within one line,
+	 *  hactive = total number of horizontal active pixels
+	 *  htotal = total number of horizontal pixels
+	 */
+	a.full = rfixed_const(crtc->base.mode.crtc_htotal);
+	b.full = rfixed_const(crtc->base.mode.crtc_hdisplay);
+	wm->active_time.full = rfixed_mul(line_time, b);
+	wm->active_time.full = rfixed_div(wm->active_time, a);
+
+	/* Determine chunk time
+	 * ChunkTime = the time it takes the DCP to send one chunk of data
+	 * to the LB which consists of pipeline delay and inter chunk gap
+	 * sclk = system clock(Mhz)
+	 */
+	a.full = rfixed_const(600 * 1000);
+	chunk_time.full = rfixed_div(a, rdev->pm.sclk);
+	read_delay_latency.full = rfixed_const(1000);
+
+	/* Determine the worst case latency
+	 * NumLinePair = Number of line pairs to request(1=2 lines, 2=4 lines)
+	 * WorstCaseLatency = worst case time from urgent to when the MC starts
+	 *                    to return data
+	 * READ_DELAY_IDLE_MAX = constant of 1us
+	 * ChunkTime = time it takes the DCP to send one chunk of data to the LB
+	 *             which consists of pipeline delay and inter chunk gap
+	 */
+	if (rfixed_trunc(wm->num_line_pair) > 1) {
+		a.full = rfixed_const(3);
+		wm->worst_case_latency.full = rfixed_mul(a, chunk_time);
+		wm->worst_case_latency.full += read_delay_latency.full;
+	} else {
+		wm->worst_case_latency.full = chunk_time.full + read_delay_latency.full;
+	}
+
+	/* Determine the tolerable latency
+	 * TolerableLatency = Any given request has only 1 line time
+	 *                    for the data to be returned
+	 * LBRequestFifoDepth = Number of chunk requests the LB can
+	 *                      put into the request FIFO for a display
+	 *  LineTime = total time for one line of display
+	 *  ChunkTime = the time it takes the DCP to send one chunk
+	 *              of data to the LB which consists of
+	 *  pipeline delay and inter chunk gap
+	 */
+	if ((2+wm->lb_request_fifo_depth) >= rfixed_trunc(request_fifo_depth)) {
+		tolerable_latency.full = line_time.full;
+	} else {
+		tolerable_latency.full = rfixed_const(wm->lb_request_fifo_depth - 2);
+		tolerable_latency.full = request_fifo_depth.full - tolerable_latency.full;
+		tolerable_latency.full = rfixed_mul(tolerable_latency, chunk_time);
+		tolerable_latency.full = line_time.full - tolerable_latency.full;
+	}
+	/* We assume worst case 32bits (4 bytes) */
+	wm->dbpp.full = rfixed_const(2 * 16);
+
+	/* Determine the maximum priority mark
+	 *  width = viewport width in pixels
+	 */
+	a.full = rfixed_const(16);
+	wm->priority_mark_max.full = rfixed_const(crtc->base.mode.crtc_hdisplay);
+	wm->priority_mark_max.full = rfixed_div(wm->priority_mark_max, a);
+
+	/* Determine estimated width */
+	estimated_width.full = tolerable_latency.full - wm->worst_case_latency.full;
+	estimated_width.full = rfixed_div(estimated_width, consumption_time);
+	if (rfixed_trunc(estimated_width) > crtc->base.mode.crtc_hdisplay) {
+		wm->priority_mark.full = rfixed_const(10);
+	} else {
+		a.full = rfixed_const(16);
+		wm->priority_mark.full = rfixed_div(estimated_width, a);
+		wm->priority_mark.full = wm->priority_mark_max.full - wm->priority_mark.full;
+	}
+}
+
+void rv515_bandwidth_avivo_update(struct radeon_device *rdev)
+{
+	struct drm_display_mode *mode0 = NULL;
+	struct drm_display_mode *mode1 = NULL;
+	struct rv515_watermark wm0;
+	struct rv515_watermark wm1;
+	u32 tmp;
+	fixed20_12 priority_mark02, priority_mark12, fill_rate;
+	fixed20_12 a, b;
+
+	if (rdev->mode_info.crtcs[0]->base.enabled)
+		mode0 = &rdev->mode_info.crtcs[0]->base.mode;
+	if (rdev->mode_info.crtcs[1]->base.enabled)
+		mode1 = &rdev->mode_info.crtcs[1]->base.mode;
+	rs690_line_buffer_adjust(rdev, mode0, mode1);
+
+	rv515_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[0], &wm0);
+	rv515_crtc_bandwidth_compute(rdev, rdev->mode_info.crtcs[1], &wm1);
+
+	tmp = wm0.lb_request_fifo_depth;
+	tmp |= wm1.lb_request_fifo_depth << 16;
+	WREG32(LB_MAX_REQ_OUTSTANDING, tmp);
+
+	if (mode0 && mode1) {
+		if (rfixed_trunc(wm0.dbpp) > 64)
+			a.full = rfixed_div(wm0.dbpp, wm0.num_line_pair);
+		else
+			a.full = wm0.num_line_pair.full;
+		if (rfixed_trunc(wm1.dbpp) > 64)
+			b.full = rfixed_div(wm1.dbpp, wm1.num_line_pair);
+		else
+			b.full = wm1.num_line_pair.full;
+		a.full += b.full;
+		fill_rate.full = rfixed_div(wm0.sclk, a);
+		if (wm0.consumption_rate.full > fill_rate.full) {
+			b.full = wm0.consumption_rate.full - fill_rate.full;
+			b.full = rfixed_mul(b, wm0.active_time);
+			a.full = rfixed_const(16);
+			b.full = rfixed_div(b, a);
+			a.full = rfixed_mul(wm0.worst_case_latency,
+						wm0.consumption_rate);
+			priority_mark02.full = a.full + b.full;
+		} else {
+			a.full = rfixed_mul(wm0.worst_case_latency,
+						wm0.consumption_rate);
+			b.full = rfixed_const(16 * 1000);
+			priority_mark02.full = rfixed_div(a, b);
+		}
+		if (wm1.consumption_rate.full > fill_rate.full) {
+			b.full = wm1.consumption_rate.full - fill_rate.full;
+			b.full = rfixed_mul(b, wm1.active_time);
+			a.full = rfixed_const(16);
+			b.full = rfixed_div(b, a);
+			a.full = rfixed_mul(wm1.worst_case_latency,
+						wm1.consumption_rate);
+			priority_mark12.full = a.full + b.full;
+		} else {
+			a.full = rfixed_mul(wm1.worst_case_latency,
+						wm1.consumption_rate);
+			b.full = rfixed_const(16 * 1000);
+			priority_mark12.full = rfixed_div(a, b);
+		}
+		if (wm0.priority_mark.full > priority_mark02.full)
+			priority_mark02.full = wm0.priority_mark.full;
+		if (rfixed_trunc(priority_mark02) < 0)
+			priority_mark02.full = 0;
+		if (wm0.priority_mark_max.full > priority_mark02.full)
+			priority_mark02.full = wm0.priority_mark_max.full;
+		if (wm1.priority_mark.full > priority_mark12.full)
+			priority_mark12.full = wm1.priority_mark.full;
+		if (rfixed_trunc(priority_mark12) < 0)
+			priority_mark12.full = 0;
+		if (wm1.priority_mark_max.full > priority_mark12.full)
+			priority_mark12.full = wm1.priority_mark_max.full;
+		WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
+		WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
+		WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
+		WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+	} else if (mode0) {
+		if (rfixed_trunc(wm0.dbpp) > 64)
+			a.full = rfixed_div(wm0.dbpp, wm0.num_line_pair);
+		else
+			a.full = wm0.num_line_pair.full;
+		fill_rate.full = rfixed_div(wm0.sclk, a);
+		if (wm0.consumption_rate.full > fill_rate.full) {
+			b.full = wm0.consumption_rate.full - fill_rate.full;
+			b.full = rfixed_mul(b, wm0.active_time);
+			a.full = rfixed_const(16);
+			b.full = rfixed_div(b, a);
+			a.full = rfixed_mul(wm0.worst_case_latency,
+						wm0.consumption_rate);
+			priority_mark02.full = a.full + b.full;
+		} else {
+			a.full = rfixed_mul(wm0.worst_case_latency,
+						wm0.consumption_rate);
+			b.full = rfixed_const(16);
+			priority_mark02.full = rfixed_div(a, b);
+		}
+		if (wm0.priority_mark.full > priority_mark02.full)
+			priority_mark02.full = wm0.priority_mark.full;
+		if (rfixed_trunc(priority_mark02) < 0)
+			priority_mark02.full = 0;
+		if (wm0.priority_mark_max.full > priority_mark02.full)
+			priority_mark02.full = wm0.priority_mark_max.full;
+		WREG32(D1MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark02));
+		WREG32(D1MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark02));
+		WREG32(D2MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
+		WREG32(D2MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
+	} else {
+		if (rfixed_trunc(wm1.dbpp) > 64)
+			a.full = rfixed_div(wm1.dbpp, wm1.num_line_pair);
+		else
+			a.full = wm1.num_line_pair.full;
+		fill_rate.full = rfixed_div(wm1.sclk, a);
+		if (wm1.consumption_rate.full > fill_rate.full) {
+			b.full = wm1.consumption_rate.full - fill_rate.full;
+			b.full = rfixed_mul(b, wm1.active_time);
+			a.full = rfixed_const(16);
+			b.full = rfixed_div(b, a);
+			a.full = rfixed_mul(wm1.worst_case_latency,
+						wm1.consumption_rate);
+			priority_mark12.full = a.full + b.full;
+		} else {
+			a.full = rfixed_mul(wm1.worst_case_latency,
+						wm1.consumption_rate);
+			b.full = rfixed_const(16 * 1000);
+			priority_mark12.full = rfixed_div(a, b);
+		}
+		if (wm1.priority_mark.full > priority_mark12.full)
+			priority_mark12.full = wm1.priority_mark.full;
+		if (rfixed_trunc(priority_mark12) < 0)
+			priority_mark12.full = 0;
+		if (wm1.priority_mark_max.full > priority_mark12.full)
+			priority_mark12.full = wm1.priority_mark_max.full;
+		WREG32(D1MODE_PRIORITY_A_CNT, MODE_PRIORITY_OFF);
+		WREG32(D1MODE_PRIORITY_B_CNT, MODE_PRIORITY_OFF);
+		WREG32(D2MODE_PRIORITY_A_CNT, rfixed_trunc(priority_mark12));
+		WREG32(D2MODE_PRIORITY_B_CNT, rfixed_trunc(priority_mark12));
+	}
+}
+
+void rv515_bandwidth_update(struct radeon_device *rdev)
+{
+	uint32_t tmp;
+	struct drm_display_mode *mode0 = NULL;
+	struct drm_display_mode *mode1 = NULL;
+
+	if (rdev->mode_info.crtcs[0]->base.enabled)
+		mode0 = &rdev->mode_info.crtcs[0]->base.mode;
+	if (rdev->mode_info.crtcs[1]->base.enabled)
+		mode1 = &rdev->mode_info.crtcs[1]->base.mode;
+	/*
+	 * Set display0/1 priority up in the memory controller for
+	 * modes if the user specifies HIGH for displaypriority
+	 * option.
+	 */
+	if (rdev->disp_priority == 2) {
+		tmp = RREG32_MC(MC_MISC_LAT_TIMER);
+		tmp &= ~MC_DISP1R_INIT_LAT_MASK;
+		tmp &= ~MC_DISP0R_INIT_LAT_MASK;
+		if (mode1)
+			tmp |= (1 << MC_DISP1R_INIT_LAT_SHIFT);
+		if (mode0)
+			tmp |= (1 << MC_DISP0R_INIT_LAT_SHIFT);
+		WREG32_MC(MC_MISC_LAT_TIMER, tmp);
+	}
+	rv515_bandwidth_avivo_update(rdev);
+}
diff --git a/drivers/gpu/drm/radeon/rv515r.h b/drivers/gpu/drm/radeon/rv515r.h
new file mode 100644
index 0000000..f3cf840
--- /dev/null
+++ b/drivers/gpu/drm/radeon/rv515r.h
@@ -0,0 +1,170 @@
+/*
+ * Copyright 2008 Advanced Micro Devices, Inc.
+ * Copyright 2008 Red Hat Inc.
+ * Copyright 2009 Jerome Glisse.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
+ * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR
+ * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Authors: Dave Airlie
+ *          Alex Deucher
+ *          Jerome Glisse
+ */
+#ifndef RV515R_H
+#define RV515R_H
+
+/* RV515 registers */
+#define PCIE_INDEX			0x0030
+#define PCIE_DATA			0x0034
+#define	MC_IND_INDEX			0x0070
+#define		MC_IND_WR_EN				(1 << 24)
+#define	MC_IND_DATA			0x0074
+#define	RBBM_SOFT_RESET			0x00F0
+#define	CONFIG_MEMSIZE			0x00F8
+#define HDP_FB_LOCATION			0x0134
+#define	CP_CSQ_CNTL			0x0740
+#define	CP_CSQ_MODE			0x0744
+#define	CP_CSQ_ADDR			0x07F0
+#define	CP_CSQ_DATA			0x07F4
+#define	CP_CSQ_STAT			0x07F8
+#define	CP_CSQ2_STAT			0x07FC
+#define	RBBM_STATUS			0x0E40
+#define	DST_PIPE_CONFIG			0x170C
+#define	WAIT_UNTIL			0x1720
+#define		WAIT_2D_IDLE				(1 << 14)
+#define		WAIT_3D_IDLE				(1 << 15)
+#define		WAIT_2D_IDLECLEAN			(1 << 16)
+#define		WAIT_3D_IDLECLEAN			(1 << 17)
+#define	ISYNC_CNTL			0x1724
+#define		ISYNC_ANY2D_IDLE3D			(1 << 0)
+#define		ISYNC_ANY3D_IDLE2D			(1 << 1)
+#define		ISYNC_TRIG2D_IDLE3D			(1 << 2)
+#define		ISYNC_TRIG3D_IDLE2D			(1 << 3)
+#define		ISYNC_WAIT_IDLEGUI			(1 << 4)
+#define		ISYNC_CPSCRATCH_IDLEGUI			(1 << 5)
+#define	VAP_INDEX_OFFSET		0x208C
+#define	VAP_PVS_STATE_FLUSH_REG		0x2284
+#define	GB_ENABLE			0x4008
+#define	GB_MSPOS0			0x4010
+#define		MS_X0_SHIFT				0
+#define		MS_Y0_SHIFT				4
+#define		MS_X1_SHIFT				8
+#define		MS_Y1_SHIFT				12
+#define		MS_X2_SHIFT				16
+#define		MS_Y2_SHIFT				20
+#define		MSBD0_Y_SHIFT				24
+#define		MSBD0_X_SHIFT				28
+#define	GB_MSPOS1			0x4014
+#define		MS_X3_SHIFT				0
+#define		MS_Y3_SHIFT				4
+#define		MS_X4_SHIFT				8
+#define		MS_Y4_SHIFT				12
+#define		MS_X5_SHIFT				16
+#define		MS_Y5_SHIFT				20
+#define		MSBD1_SHIFT				24
+#define GB_TILE_CONFIG			0x4018
+#define		ENABLE_TILING				(1 << 0)
+#define		PIPE_COUNT_MASK				0x0000000E
+#define		PIPE_COUNT_SHIFT			1
+#define		TILE_SIZE_8				(0 << 4)
+#define		TILE_SIZE_16				(1 << 4)
+#define		TILE_SIZE_32				(2 << 4)
+#define		SUBPIXEL_1_12				(0 << 16)
+#define		SUBPIXEL_1_16				(1 << 16)
+#define	GB_SELECT			0x401C
+#define	GB_AA_CONFIG			0x4020
+#define	GB_PIPE_SELECT			0x402C
+#define	GA_ENHANCE			0x4274
+#define		GA_DEADLOCK_CNTL			(1 << 0)
+#define		GA_FASTSYNC_CNTL			(1 << 1)
+#define	GA_POLY_MODE			0x4288
+#define		FRONT_PTYPE_POINT			(0 << 4)
+#define		FRONT_PTYPE_LINE			(1 << 4)
+#define		FRONT_PTYPE_TRIANGE			(2 << 4)
+#define		BACK_PTYPE_POINT			(0 << 7)
+#define		BACK_PTYPE_LINE				(1 << 7)
+#define		BACK_PTYPE_TRIANGE			(2 << 7)
+#define	GA_ROUND_MODE			0x428C
+#define		GEOMETRY_ROUND_TRUNC			(0 << 0)
+#define		GEOMETRY_ROUND_NEAREST			(1 << 0)
+#define		COLOR_ROUND_TRUNC			(0 << 2)
+#define		COLOR_ROUND_NEAREST			(1 << 2)
+#define	SU_REG_DEST			0x42C8
+#define	RB3D_DSTCACHE_CTLSTAT		0x4E4C
+#define		RB3D_DC_FLUSH				(2 << 0)
+#define		RB3D_DC_FREE				(2 << 2)
+#define		RB3D_DC_FINISH				(1 << 4)
+#define ZB_ZCACHE_CTLSTAT		0x4F18
+#define		ZC_FLUSH				(1 << 0)
+#define		ZC_FREE					(1 << 1)
+#define DC_LB_MEMORY_SPLIT		0x6520
+#define		DC_LB_MEMORY_SPLIT_MASK			0x00000003
+#define		DC_LB_MEMORY_SPLIT_SHIFT		0
+#define		DC_LB_MEMORY_SPLIT_D1HALF_D2HALF	0
+#define		DC_LB_MEMORY_SPLIT_D1_3Q_D2_1Q		1
+#define		DC_LB_MEMORY_SPLIT_D1_ONLY		2
+#define		DC_LB_MEMORY_SPLIT_D1_1Q_D2_3Q		3
+#define		DC_LB_MEMORY_SPLIT_SHIFT_MODE		(1 << 2)
+#define		DC_LB_DISP1_END_ADR_SHIFT		4
+#define		DC_LB_DISP1_END_ADR_MASK		0x00007FF0
+#define D1MODE_PRIORITY_A_CNT		0x6548
+#define		MODE_PRIORITY_MARK_MASK			0x00007FFF
+#define		MODE_PRIORITY_OFF			(1 << 16)
+#define		MODE_PRIORITY_ALWAYS_ON			(1 << 20)
+#define		MODE_PRIORITY_FORCE_MASK		(1 << 24)
+#define D1MODE_PRIORITY_B_CNT		0x654C
+#define LB_MAX_REQ_OUTSTANDING		0x6D58
+#define		LB_D1_MAX_REQ_OUTSTANDING_MASK		0x0000000F
+#define		LB_D1_MAX_REQ_OUTSTANDING_SHIFT		0
+#define		LB_D2_MAX_REQ_OUTSTANDING_MASK		0x000F0000
+#define		LB_D2_MAX_REQ_OUTSTANDING_SHIFT		16
+#define D2MODE_PRIORITY_A_CNT		0x6D48
+#define D2MODE_PRIORITY_B_CNT		0x6D4C
+
+/* ix[MC] registers */
+#define MC_FB_LOCATION			0x01
+#define		MC_FB_START_MASK			0x0000FFFF
+#define		MC_FB_START_SHIFT			0
+#define		MC_FB_TOP_MASK				0xFFFF0000
+#define		MC_FB_TOP_SHIFT				16
+#define MC_AGP_LOCATION			0x02
+#define		MC_AGP_START_MASK			0x0000FFFF
+#define		MC_AGP_START_SHIFT			0
+#define		MC_AGP_TOP_MASK				0xFFFF0000
+#define		MC_AGP_TOP_SHIFT			16
+#define MC_AGP_BASE			0x03
+#define MC_AGP_BASE_2			0x04
+#define	MC_CNTL				0x5
+#define		MEM_NUM_CHANNELS_MASK			0x00000003
+#define	MC_STATUS			0x08
+#define		MC_STATUS_IDLE				(1 << 4)
+#define	MC_MISC_LAT_TIMER		0x09
+#define		MC_CPR_INIT_LAT_MASK			0x0000000F
+#define		MC_VF_INIT_LAT_MASK			0x000000F0
+#define		MC_DISP0R_INIT_LAT_MASK			0x00000F00
+#define		MC_DISP0R_INIT_LAT_SHIFT		8
+#define		MC_DISP1R_INIT_LAT_MASK			0x0000F000
+#define		MC_DISP1R_INIT_LAT_SHIFT		12
+#define		MC_FIXED_INIT_LAT_MASK			0x000F0000
+#define		MC_E2R_INIT_LAT_MASK			0x00F00000
+#define		SAME_PAGE_PRIO_MASK			0x0F000000
+#define		MC_GLOBW_INIT_LAT_MASK			0xF0000000
+
+
+#endif
+
diff --git a/drivers/gpu/drm/radeon/rv770.c b/drivers/gpu/drm/radeon/rv770.c
index da50cc5..21d8ffd 100644
--- a/drivers/gpu/drm/radeon/rv770.c
+++ b/drivers/gpu/drm/radeon/rv770.c
@@ -67,7 +67,7 @@ int rv770_mc_init(struct radeon_device *rdev)
 		       "programming pipes. Bad things might happen.\n");
 	}
 
-	tmp = rdev->mc.vram_location + rdev->mc.vram_size - 1;
+	tmp = rdev->mc.vram_location + rdev->mc.mc_vram_size - 1;
 	tmp = REG_SET(R700_MC_FB_TOP, tmp >> 24);
 	tmp |= REG_SET(R700_MC_FB_BASE, rdev->mc.vram_location >> 24);
 	WREG32(R700_MC_VM_FB_LOCATION, tmp);
diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c
index c1c407f..6538d42 100644
--- a/drivers/gpu/drm/ttm/ttm_bo.c
+++ b/drivers/gpu/drm/ttm/ttm_bo.c
@@ -43,7 +43,6 @@
 #define TTM_BO_HASH_ORDER 13
 
 static int ttm_bo_setup_vm(struct ttm_buffer_object *bo);
-static void ttm_bo_unmap_virtual(struct ttm_buffer_object *bo);
 static int ttm_bo_swapout(struct ttm_mem_shrink *shrink);
 
 static inline uint32_t ttm_bo_type_flags(unsigned type)
@@ -224,6 +223,9 @@ static int ttm_bo_add_ttm(struct ttm_buffer_object *bo, bool zero_alloc)
 	TTM_ASSERT_LOCKED(&bo->mutex);
 	bo->ttm = NULL;
 
+	if (bdev->need_dma32)
+		page_flags |= TTM_PAGE_FLAG_DMA32;
+
 	switch (bo->type) {
 	case ttm_bo_type_device:
 		if (zero_alloc)
@@ -304,6 +306,9 @@ static int ttm_bo_handle_move_mem(struct ttm_buffer_object *bo,
 
 	}
 
+	if (bdev->driver->move_notify)
+		bdev->driver->move_notify(bo, mem);
+
 	if (!(old_man->flags & TTM_MEMTYPE_FLAG_FIXED) &&
 	    !(new_man->flags & TTM_MEMTYPE_FLAG_FIXED))
 		ret = ttm_bo_move_ttm(bo, evict, no_wait, mem);
@@ -655,31 +660,52 @@ retry_pre_get:
 	return 0;
 }
 
+static uint32_t ttm_bo_select_caching(struct ttm_mem_type_manager *man,
+				      uint32_t cur_placement,
+				      uint32_t proposed_placement)
+{
+	uint32_t caching = proposed_placement & TTM_PL_MASK_CACHING;
+	uint32_t result = proposed_placement & ~TTM_PL_MASK_CACHING;
+
+	/**
+	 * Keep current caching if possible.
+	 */
+
+	if ((cur_placement & caching) != 0)
+		result |= (cur_placement & caching);
+	else if ((man->default_caching & caching) != 0)
+		result |= man->default_caching;
+	else if ((TTM_PL_FLAG_CACHED & caching) != 0)
+		result |= TTM_PL_FLAG_CACHED;
+	else if ((TTM_PL_FLAG_WC & caching) != 0)
+		result |= TTM_PL_FLAG_WC;
+	else if ((TTM_PL_FLAG_UNCACHED & caching) != 0)
+		result |= TTM_PL_FLAG_UNCACHED;
+
+	return result;
+}
+
+
 static bool ttm_bo_mt_compatible(struct ttm_mem_type_manager *man,
 				 bool disallow_fixed,
 				 uint32_t mem_type,
-				 uint32_t mask, uint32_t *res_mask)
+				 uint32_t proposed_placement,
+				 uint32_t *masked_placement)
 {
 	uint32_t cur_flags = ttm_bo_type_flags(mem_type);
 
 	if ((man->flags & TTM_MEMTYPE_FLAG_FIXED) && disallow_fixed)
 		return false;
 
-	if ((cur_flags & mask & TTM_PL_MASK_MEM) == 0)
+	if ((cur_flags & proposed_placement & TTM_PL_MASK_MEM) == 0)
 		return false;
 
-	if ((mask & man->available_caching) == 0)
+	if ((proposed_placement & man->available_caching) == 0)
 		return false;
-	if (mask & man->default_caching)
-		cur_flags |= man->default_caching;
-	else if (mask & TTM_PL_FLAG_CACHED)
-		cur_flags |= TTM_PL_FLAG_CACHED;
-	else if (mask & TTM_PL_FLAG_WC)
-		cur_flags |= TTM_PL_FLAG_WC;
-	else
-		cur_flags |= TTM_PL_FLAG_UNCACHED;
 
-	*res_mask = cur_flags;
+	cur_flags |= (proposed_placement & man->available_caching);
+
+	*masked_placement = cur_flags;
 	return true;
 }
 
@@ -723,6 +749,9 @@ int ttm_bo_mem_space(struct ttm_buffer_object *bo,
 		if (!type_ok)
 			continue;
 
+		cur_flags = ttm_bo_select_caching(man, bo->mem.placement,
+						  cur_flags);
+
 		if (mem_type == TTM_PL_SYSTEM)
 			break;
 
@@ -779,6 +808,9 @@ int ttm_bo_mem_space(struct ttm_buffer_object *bo,
 					  proposed_placement, &cur_flags))
 			continue;
 
+		cur_flags = ttm_bo_select_caching(man, bo->mem.placement,
+						  cur_flags);
+
 		ret = ttm_bo_mem_force_space(bdev, mem, mem_type,
 					     interruptible, no_wait);
 
@@ -1305,7 +1337,8 @@ EXPORT_SYMBOL(ttm_bo_device_release);
 
 int ttm_bo_device_init(struct ttm_bo_device *bdev,
 		       struct ttm_mem_global *mem_glob,
-		       struct ttm_bo_driver *driver, uint64_t file_page_offset)
+		       struct ttm_bo_driver *driver, uint64_t file_page_offset,
+		       bool need_dma32)
 {
 	int ret = -EINVAL;
 
@@ -1342,6 +1375,7 @@ int ttm_bo_device_init(struct ttm_bo_device *bdev,
 	INIT_LIST_HEAD(&bdev->ddestroy);
 	INIT_LIST_HEAD(&bdev->swap_lru);
 	bdev->dev_mapping = NULL;
+	bdev->need_dma32 = need_dma32;
 	ttm_mem_init_shrink(&bdev->shrink, ttm_bo_swapout);
 	ret = ttm_mem_register_shrink(mem_glob, &bdev->shrink);
 	if (unlikely(ret != 0)) {
@@ -1419,6 +1453,7 @@ void ttm_bo_unmap_virtual(struct ttm_buffer_object *bo)
 
 	unmap_mapping_range(bdev->dev_mapping, offset, holelen, 1);
 }
+EXPORT_SYMBOL(ttm_bo_unmap_virtual);
 
 static void ttm_bo_vm_insert_rb(struct ttm_buffer_object *bo)
 {
diff --git a/drivers/gpu/drm/ttm/ttm_bo_util.c b/drivers/gpu/drm/ttm/ttm_bo_util.c
index bdec583..ce2e6f3 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_util.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_util.c
@@ -136,7 +136,8 @@ static int ttm_copy_io_page(void *dst, void *src, unsigned long page)
 }
 
 static int ttm_copy_io_ttm_page(struct ttm_tt *ttm, void *src,
-				unsigned long page)
+				unsigned long page,
+				pgprot_t prot)
 {
 	struct page *d = ttm_tt_get_page(ttm, page);
 	void *dst;
@@ -145,17 +146,35 @@ static int ttm_copy_io_ttm_page(struct ttm_tt *ttm, void *src,
 		return -ENOMEM;
 
 	src = (void *)((unsigned long)src + (page << PAGE_SHIFT));
-	dst = kmap(d);
+
+#ifdef CONFIG_X86
+	dst = kmap_atomic_prot(d, KM_USER0, prot);
+#else
+	if (prot != PAGE_KERNEL)
+		dst = vmap(&d, 1, 0, prot);
+	else
+		dst = kmap(d);
+#endif
 	if (!dst)
 		return -ENOMEM;
 
 	memcpy_fromio(dst, src, PAGE_SIZE);
-	kunmap(d);
+
+#ifdef CONFIG_X86
+	kunmap_atomic(dst, KM_USER0);
+#else
+	if (prot != PAGE_KERNEL)
+		vunmap(dst);
+	else
+		kunmap(d);
+#endif
+
 	return 0;
 }
 
 static int ttm_copy_ttm_io_page(struct ttm_tt *ttm, void *dst,
-				unsigned long page)
+				unsigned long page,
+				pgprot_t prot)
 {
 	struct page *s = ttm_tt_get_page(ttm, page);
 	void *src;
@@ -164,12 +183,28 @@ static int ttm_copy_ttm_io_page(struct ttm_tt *ttm, void *dst,
 		return -ENOMEM;
 
 	dst = (void *)((unsigned long)dst + (page << PAGE_SHIFT));
-	src = kmap(s);
+#ifdef CONFIG_X86
+	src = kmap_atomic_prot(s, KM_USER0, prot);
+#else
+	if (prot != PAGE_KERNEL)
+		src = vmap(&s, 1, 0, prot);
+	else
+		src = kmap(s);
+#endif
 	if (!src)
 		return -ENOMEM;
 
 	memcpy_toio(dst, src, PAGE_SIZE);
-	kunmap(s);
+
+#ifdef CONFIG_X86
+	kunmap_atomic(src, KM_USER0);
+#else
+	if (prot != PAGE_KERNEL)
+		vunmap(src);
+	else
+		kunmap(s);
+#endif
+
 	return 0;
 }
 
@@ -214,11 +249,17 @@ int ttm_bo_move_memcpy(struct ttm_buffer_object *bo,
 
 	for (i = 0; i < new_mem->num_pages; ++i) {
 		page = i * dir + add;
-		if (old_iomap == NULL)
-			ret = ttm_copy_ttm_io_page(ttm, new_iomap, page);
-		else if (new_iomap == NULL)
-			ret = ttm_copy_io_ttm_page(ttm, old_iomap, page);
-		else
+		if (old_iomap == NULL) {
+			pgprot_t prot = ttm_io_prot(old_mem->placement,
+						    PAGE_KERNEL);
+			ret = ttm_copy_ttm_io_page(ttm, new_iomap, page,
+						   prot);
+		} else if (new_iomap == NULL) {
+			pgprot_t prot = ttm_io_prot(new_mem->placement,
+						    PAGE_KERNEL);
+			ret = ttm_copy_io_ttm_page(ttm, old_iomap, page,
+						   prot);
+		} else
 			ret = ttm_copy_io_page(new_iomap, old_iomap, page);
 		if (ret)
 			goto out1;
@@ -509,8 +550,8 @@ int ttm_bo_move_accel_cleanup(struct ttm_buffer_object *bo,
 	if (evict) {
 		ret = ttm_bo_wait(bo, false, false, false);
 		spin_unlock(&bo->lock);
-		driver->sync_obj_unref(&bo->sync_obj);
-
+		if (tmp_obj)
+			driver->sync_obj_unref(&tmp_obj);
 		if (ret)
 			return ret;
 
@@ -532,6 +573,8 @@ int ttm_bo_move_accel_cleanup(struct ttm_buffer_object *bo,
 
 		set_bit(TTM_BO_PRIV_FLAG_MOVING, &bo->priv_flags);
 		spin_unlock(&bo->lock);
+		if (tmp_obj)
+			driver->sync_obj_unref(&tmp_obj);
 
 		ret = ttm_buffer_object_transfer(bo, &ghost_obj);
 		if (ret)
diff --git a/drivers/gpu/drm/ttm/ttm_bo_vm.c b/drivers/gpu/drm/ttm/ttm_bo_vm.c
index fe949a1..33de763 100644
--- a/drivers/gpu/drm/ttm/ttm_bo_vm.c
+++ b/drivers/gpu/drm/ttm/ttm_bo_vm.c
@@ -101,6 +101,9 @@ static int ttm_bo_vm_fault(struct vm_area_struct *vma, struct vm_fault *vmf)
 		return VM_FAULT_NOPAGE;
 	}
 
+	if (bdev->driver->fault_reserve_notify)
+		bdev->driver->fault_reserve_notify(bo);
+
 	/*
 	 * Wait for buffer data in transit, due to a pipelined
 	 * move.
diff --git a/drivers/gpu/drm/ttm/ttm_tt.c b/drivers/gpu/drm/ttm/ttm_tt.c
index 75dc8bd..b8b6c4a 100644
--- a/drivers/gpu/drm/ttm/ttm_tt.c
+++ b/drivers/gpu/drm/ttm/ttm_tt.c
@@ -86,10 +86,16 @@ void ttm_tt_cache_flush(struct page *pages[], unsigned long num_pages)
 	unsigned long i;
 
 	for (i = 0; i < num_pages; ++i) {
-		if (pages[i]) {
-			unsigned long start = (unsigned long)page_address(pages[i]);
-			flush_dcache_range(start, start + PAGE_SIZE);
-		}
+		struct page *page = pages[i];
+		void *page_virtual;
+
+		if (unlikely(page == NULL))
+			continue;
+
+		page_virtual = kmap_atomic(page, KM_USER0);
+		flush_dcache_range((unsigned long) page_virtual,
+				   (unsigned long) page_virtual + PAGE_SIZE);
+		kunmap_atomic(page_virtual, KM_USER0);
 	}
 #else
 	if (on_each_cpu(ttm_tt_ipi_handler, NULL, 1) != 0)
@@ -131,10 +137,17 @@ static void ttm_tt_free_page_directory(struct ttm_tt *ttm)
 
 static struct page *ttm_tt_alloc_page(unsigned page_flags)
 {
+	gfp_t gfp_flags = GFP_USER;
+
 	if (page_flags & TTM_PAGE_FLAG_ZERO_ALLOC)
-		return alloc_page(GFP_HIGHUSER | __GFP_ZERO);
+		gfp_flags |= __GFP_ZERO;
+
+	if (page_flags & TTM_PAGE_FLAG_DMA32)
+		gfp_flags |= __GFP_DMA32;
+	else
+		gfp_flags |= __GFP_HIGHMEM;
 
-	return alloc_page(GFP_HIGHUSER);
+	return alloc_page(gfp_flags);
 }
 
 static void ttm_tt_free_user_pages(struct ttm_tt *ttm)
diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c
index bff0103..fe4fa29 100644
--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -593,7 +593,11 @@ static int atk_add_sensor(struct atk_data *data, union acpi_object *obj)
 	sensor->data = data;
 	sensor->id = flags->integer.value;
 	sensor->limit1 = limit1->integer.value;
-	sensor->limit2 = limit2->integer.value;
+	if (data->old_interface)
+		sensor->limit2 = limit2->integer.value;
+	else
+		/* The upper limit is expressed as delta from lower limit */
+		sensor->limit2 = sensor->limit1 + limit2->integer.value;
 
 	snprintf(sensor->input_attr_name, ATTR_NAME_SIZE,
 			"%s%d_input", base_name, start + *num);
diff --git a/drivers/hwmon/smsc47m1.c b/drivers/hwmon/smsc47m1.c
index a92dbb9..ba75bfc 100644
--- a/drivers/hwmon/smsc47m1.c
+++ b/drivers/hwmon/smsc47m1.c
@@ -86,6 +86,7 @@ superio_exit(void)
 #define SUPERIO_REG_ACT		0x30
 #define SUPERIO_REG_BASE	0x60
 #define SUPERIO_REG_DEVID	0x20
+#define SUPERIO_REG_DEVREV	0x21
 
 /* Logical device registers */
 
@@ -429,6 +430,9 @@ static int __init smsc47m1_find(unsigned short *addr,
 	 * The LPC47M292 (device id 0x6B) is somewhat compatible, but it
 	 * supports a 3rd fan, and the pin configuration registers are
 	 * unfortunately different.
+	 * The LPC47M233 has the same device id (0x6B) but is not compatible.
+	 * We check the high bit of the device revision register to
+	 * differentiate them.
 	 */
 	switch (val) {
 	case 0x51:
@@ -448,6 +452,13 @@ static int __init smsc47m1_find(unsigned short *addr,
 		sio_data->type = smsc47m1;
 		break;
 	case 0x6B:
+		if (superio_inb(SUPERIO_REG_DEVREV) & 0x80) {
+			pr_debug(DRVNAME ": "
+				 "Found SMSC LPC47M233, unsupported\n");
+			superio_exit();
+			return -ENODEV;
+		}
+
 		pr_info(DRVNAME ": Found SMSC LPC47M292\n");
 		sio_data->type = smsc47m2;
 		break;
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index fdd8327..d258b02 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -672,9 +672,10 @@ omap_i2c_isr(int this_irq, void *dev_id)
 			break;
 		}
 
+		err = 0;
+complete:
 		omap_i2c_write_reg(dev, OMAP_I2C_STAT_REG, stat);
 
-		err = 0;
 		if (stat & OMAP_I2C_STAT_NACK) {
 			err |= OMAP_I2C_STAT_NACK;
 			omap_i2c_write_reg(dev, OMAP_I2C_CON_REG,
@@ -685,16 +686,19 @@ omap_i2c_isr(int this_irq, void *dev_id)
 			err |= OMAP_I2C_STAT_AL;
 		}
 		if (stat & (OMAP_I2C_STAT_ARDY | OMAP_I2C_STAT_NACK |
-					OMAP_I2C_STAT_AL))
+					OMAP_I2C_STAT_AL)) {
 			omap_i2c_complete_cmd(dev, err);
+			return IRQ_HANDLED;
+		}
 		if (stat & (OMAP_I2C_STAT_RRDY | OMAP_I2C_STAT_RDR)) {
 			u8 num_bytes = 1;
 			if (dev->fifo_size) {
 				if (stat & OMAP_I2C_STAT_RRDY)
 					num_bytes = dev->fifo_size;
-				else
-					num_bytes = omap_i2c_read_reg(dev,
-							OMAP_I2C_BUFSTAT_REG);
+				else    /* read RXSTAT on RDR interrupt */
+					num_bytes = (omap_i2c_read_reg(dev,
+							OMAP_I2C_BUFSTAT_REG)
+							>> 8) & 0x3F;
 			}
 			while (num_bytes) {
 				num_bytes--;
@@ -731,9 +735,10 @@ omap_i2c_isr(int this_irq, void *dev_id)
 			if (dev->fifo_size) {
 				if (stat & OMAP_I2C_STAT_XRDY)
 					num_bytes = dev->fifo_size;
-				else
+				else    /* read TXSTAT on XDR interrupt */
 					num_bytes = omap_i2c_read_reg(dev,
-							OMAP_I2C_BUFSTAT_REG);
+							OMAP_I2C_BUFSTAT_REG)
+							& 0x3F;
 			}
 			while (num_bytes) {
 				num_bytes--;
@@ -760,6 +765,27 @@ omap_i2c_isr(int this_irq, void *dev_id)
 							"data to send\n");
 					break;
 				}
+
+				/*
+				 * OMAP3430 Errata 1.153: When an XRDY/XDR
+				 * is hit, wait for XUDF before writing data
+				 * to DATA_REG. Otherwise some data bytes can
+				 * be lost while transferring them from the
+				 * memory to the I2C interface.
+				 */
+
+				if (cpu_is_omap34xx()) {
+						while (!(stat & OMAP_I2C_STAT_XUDF)) {
+							if (stat & (OMAP_I2C_STAT_NACK | OMAP_I2C_STAT_AL)) {
+								omap_i2c_ack_stat(dev, stat & (OMAP_I2C_STAT_XRDY | OMAP_I2C_STAT_XDR));
+								err |= OMAP_I2C_STAT_XUDF;
+								goto complete;
+							}
+							cpu_relax();
+							stat = omap_i2c_read_reg(dev, OMAP_I2C_STAT_REG);
+						}
+				}
+
 				omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w);
 			}
 			omap_i2c_ack_stat(dev,
@@ -879,7 +905,7 @@ omap_i2c_probe(struct platform_device *pdev)
 	i2c_set_adapdata(adap, dev);
 	adap->owner = THIS_MODULE;
 	adap->class = I2C_CLASS_HWMON;
-	strncpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
+	strlcpy(adap->name, "OMAP I2C adapter", sizeof(adap->name));
 	adap->algo = &omap_i2c_algo;
 	adap->dev.parent = &pdev->dev;
 
diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c
index 8f42a45..20bb0ce 100644
--- a/drivers/i2c/busses/i2c-s3c2410.c
+++ b/drivers/i2c/busses/i2c-s3c2410.c
@@ -763,11 +763,6 @@ static int s3c24xx_i2c_init(struct s3c24xx_i2c *i2c)
 	dev_info(i2c->dev, "bus frequency set to %d KHz\n", freq);
 	dev_dbg(i2c->dev, "S3C2410_IICCON=0x%02lx\n", iicon);
 
-	/* check for s3c2440 i2c controller  */
-
-	if (s3c24xx_i2c_is2440(i2c))
-		writel(0x0, i2c->regs + S3C2440_IICLC);
-
 	return 0;
 }
 
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 4f3d99c..820487d 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -637,7 +637,7 @@ static void __exit sh_mobile_i2c_adap_exit(void)
 	platform_driver_unregister(&sh_mobile_i2c_driver);
 }
 
-module_init(sh_mobile_i2c_adap_init);
+subsys_initcall(sh_mobile_i2c_adap_init);
 module_exit(sh_mobile_i2c_adap_exit);
 
 MODULE_DESCRIPTION("SuperH Mobile I2C Bus Controller driver");
diff --git a/drivers/i2c/chips/tsl2550.c b/drivers/i2c/chips/tsl2550.c
index 1a9cc13..b96f302 100644
--- a/drivers/i2c/chips/tsl2550.c
+++ b/drivers/i2c/chips/tsl2550.c
@@ -27,7 +27,7 @@
 #include <linux/delay.h>
 
 #define TSL2550_DRV_NAME	"tsl2550"
-#define DRIVER_VERSION		"1.1.1"
+#define DRIVER_VERSION		"1.1.2"
 
 /*
  * Defines
@@ -189,13 +189,16 @@ static int tsl2550_calculate_lux(u8 ch0, u8 ch1)
 	u8 r = 128;
 
 	/* Avoid division by 0 and count 1 cannot be greater than count 0 */
-	if (c0 && (c1 <= c0))
-		r = c1 * 128 / c0;
+	if (c1 <= c0)
+		if (c0) {
+			r = c1 * 128 / c0;
+
+			/* Calculate LUX */
+			lux = ((c0 - c1) * ratio_lut[r]) / 256;
+		} else
+			lux = 0;
 	else
-		return -1;
-
-	/* Calculate LUX */
-	lux = ((c0 - c1) * ratio_lut[r]) / 256;
+		return -EAGAIN;
 
 	/* LUX range check */
 	return lux > TSL2550_MAX_LUX ? TSL2550_MAX_LUX : lux;
diff --git a/drivers/isdn/mISDN/l1oip_core.c b/drivers/isdn/mISDN/l1oip_core.c
index 990e6a7..c3b661a 100644
--- a/drivers/isdn/mISDN/l1oip_core.c
+++ b/drivers/isdn/mISDN/l1oip_core.c
@@ -731,10 +731,10 @@ l1oip_socket_thread(void *data)
 	while (!signal_pending(current)) {
 		struct kvec iov = {
 			.iov_base = recvbuf,
-			.iov_len = sizeof(recvbuf),
+			.iov_len = recvbuf_size,
 		};
 		recvlen = kernel_recvmsg(socket, &msg, &iov, 1,
-					 sizeof(recvbuf), 0);
+					 recvbuf_size, 0);
 		if (recvlen > 0) {
 			l1oip_socket_parse(hc, &sin_rx, recvbuf, recvlen);
 		} else {
diff --git a/drivers/lguest/core.c b/drivers/lguest/core.c
index a6974e9..1e2cb84 100644
--- a/drivers/lguest/core.c
+++ b/drivers/lguest/core.c
@@ -1,6 +1,8 @@
-/*P:400 This contains run_guest() which actually calls into the Host<->Guest
+/*P:400
+ * This contains run_guest() which actually calls into the Host<->Guest
  * Switcher and analyzes the return, such as determining if the Guest wants the
- * Host to do something.  This file also contains useful helper routines. :*/
+ * Host to do something.  This file also contains useful helper routines.
+:*/
 #include <linux/module.h>
 #include <linux/stringify.h>
 #include <linux/stddef.h>
@@ -24,7 +26,8 @@ static struct page **switcher_page;
 /* This One Big lock protects all inter-guest data structures. */
 DEFINE_MUTEX(lguest_lock);
 
-/*H:010 We need to set up the Switcher at a high virtual address.  Remember the
+/*H:010
+ * We need to set up the Switcher at a high virtual address.  Remember the
  * Switcher is a few hundred bytes of assembler code which actually changes the
  * CPU to run the Guest, and then changes back to the Host when a trap or
  * interrupt happens.
@@ -33,7 +36,8 @@ DEFINE_MUTEX(lguest_lock);
  * Host since it will be running as the switchover occurs.
  *
  * Trying to map memory at a particular address is an unusual thing to do, so
- * it's not a simple one-liner. */
+ * it's not a simple one-liner.
+ */
 static __init int map_switcher(void)
 {
 	int i, err;
@@ -47,8 +51,10 @@ static __init int map_switcher(void)
 	 * easy.
 	 */
 
-	/* We allocate an array of struct page pointers.  map_vm_area() wants
-	 * this, rather than just an array of pages. */
+	/*
+	 * We allocate an array of struct page pointers.  map_vm_area() wants
+	 * this, rather than just an array of pages.
+	 */
 	switcher_page = kmalloc(sizeof(switcher_page[0])*TOTAL_SWITCHER_PAGES,
 				GFP_KERNEL);
 	if (!switcher_page) {
@@ -56,8 +62,10 @@ static __init int map_switcher(void)
 		goto out;
 	}
 
-	/* Now we actually allocate the pages.  The Guest will see these pages,
-	 * so we make sure they're zeroed. */
+	/*
+	 * Now we actually allocate the pages.  The Guest will see these pages,
+	 * so we make sure they're zeroed.
+	 */
 	for (i = 0; i < TOTAL_SWITCHER_PAGES; i++) {
 		unsigned long addr = get_zeroed_page(GFP_KERNEL);
 		if (!addr) {
@@ -67,19 +75,23 @@ static __init int map_switcher(void)
 		switcher_page[i] = virt_to_page(addr);
 	}
 
-	/* First we check that the Switcher won't overlap the fixmap area at
+	/*
+	 * First we check that the Switcher won't overlap the fixmap area at
 	 * the top of memory.  It's currently nowhere near, but it could have
-	 * very strange effects if it ever happened. */
+	 * very strange effects if it ever happened.
+	 */
 	if (SWITCHER_ADDR + (TOTAL_SWITCHER_PAGES+1)*PAGE_SIZE > FIXADDR_START){
 		err = -ENOMEM;
 		printk("lguest: mapping switcher would thwack fixmap\n");
 		goto free_pages;
 	}
 
-	/* Now we reserve the "virtual memory area" we want: 0xFFC00000
+	/*
+	 * Now we reserve the "virtual memory area" we want: 0xFFC00000
 	 * (SWITCHER_ADDR).  We might not get it in theory, but in practice
 	 * it's worked so far.  The end address needs +1 because __get_vm_area
-	 * allocates an extra guard page, so we need space for that. */
+	 * allocates an extra guard page, so we need space for that.
+	 */
 	switcher_vma = __get_vm_area(TOTAL_SWITCHER_PAGES * PAGE_SIZE,
 				     VM_ALLOC, SWITCHER_ADDR, SWITCHER_ADDR
 				     + (TOTAL_SWITCHER_PAGES+1) * PAGE_SIZE);
@@ -89,11 +101,13 @@ static __init int map_switcher(void)
 		goto free_pages;
 	}
 
-	/* This code actually sets up the pages we've allocated to appear at
+	/*
+	 * This code actually sets up the pages we've allocated to appear at
 	 * SWITCHER_ADDR.  map_vm_area() takes the vma we allocated above, the
 	 * kind of pages we're mapping (kernel pages), and a pointer to our
 	 * array of struct pages.  It increments that pointer, but we don't
-	 * care. */
+	 * care.
+	 */
 	pagep = switcher_page;
 	err = map_vm_area(switcher_vma, PAGE_KERNEL_EXEC, &pagep);
 	if (err) {
@@ -101,8 +115,10 @@ static __init int map_switcher(void)
 		goto free_vma;
 	}
 
-	/* Now the Switcher is mapped at the right address, we can't fail!
-	 * Copy in the compiled-in Switcher code (from <arch>_switcher.S). */
+	/*
+	 * Now the Switcher is mapped at the right address, we can't fail!
+	 * Copy in the compiled-in Switcher code (from <arch>_switcher.S).
+	 */
 	memcpy(switcher_vma->addr, start_switcher_text,
 	       end_switcher_text - start_switcher_text);
 
@@ -124,8 +140,7 @@ out:
 }
 /*:*/
 
-/* Cleaning up the mapping when the module is unloaded is almost...
- * too easy. */
+/* Cleaning up the mapping when the module is unloaded is almost... too easy. */
 static void unmap_switcher(void)
 {
 	unsigned int i;
@@ -151,16 +166,19 @@ static void unmap_switcher(void)
  * But we can't trust the Guest: it might be trying to access the Launcher
  * code.  We have to check that the range is below the pfn_limit the Launcher
  * gave us.  We have to make sure that addr + len doesn't give us a false
- * positive by overflowing, too. */
+ * positive by overflowing, too.
+ */
 bool lguest_address_ok(const struct lguest *lg,
 		       unsigned long addr, unsigned long len)
 {
 	return (addr+len) / PAGE_SIZE < lg->pfn_limit && (addr+len >= addr);
 }
 
-/* This routine copies memory from the Guest.  Here we can see how useful the
+/*
+ * This routine copies memory from the Guest.  Here we can see how useful the
  * kill_lguest() routine we met in the Launcher can be: we return a random
- * value (all zeroes) instead of needing to return an error. */
+ * value (all zeroes) instead of needing to return an error.
+ */
 void __lgread(struct lg_cpu *cpu, void *b, unsigned long addr, unsigned bytes)
 {
 	if (!lguest_address_ok(cpu->lg, addr, bytes)
@@ -181,9 +199,11 @@ void __lgwrite(struct lg_cpu *cpu, unsigned long addr, const void *b,
 }
 /*:*/
 
-/*H:030 Let's jump straight to the the main loop which runs the Guest.
+/*H:030
+ * Let's jump straight to the the main loop which runs the Guest.
  * Remember, this is called by the Launcher reading /dev/lguest, and we keep
- * going around and around until something interesting happens. */
+ * going around and around until something interesting happens.
+ */
 int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
 {
 	/* We stop running once the Guest is dead. */
@@ -195,10 +215,17 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
 		if (cpu->hcall)
 			do_hypercalls(cpu);
 
-		/* It's possible the Guest did a NOTIFY hypercall to the
-		 * Launcher, in which case we return from the read() now. */
+		/*
+		 * It's possible the Guest did a NOTIFY hypercall to the
+		 * Launcher.
+		 */
 		if (cpu->pending_notify) {
+			/*
+			 * Does it just needs to write to a registered
+			 * eventfd (ie. the appropriate virtqueue thread)?
+			 */
 			if (!send_notify_to_eventfd(cpu)) {
+				/* OK, we tell the main Laucher. */
 				if (put_user(cpu->pending_notify, user))
 					return -EFAULT;
 				return sizeof(cpu->pending_notify);
@@ -209,29 +236,39 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
 		if (signal_pending(current))
 			return -ERESTARTSYS;
 
-		/* Check if there are any interrupts which can be delivered now:
+		/*
+		 * Check if there are any interrupts which can be delivered now:
 		 * if so, this sets up the hander to be executed when we next
-		 * run the Guest. */
+		 * run the Guest.
+		 */
 		irq = interrupt_pending(cpu, &more);
 		if (irq < LGUEST_IRQS)
 			try_deliver_interrupt(cpu, irq, more);
 
-		/* All long-lived kernel loops need to check with this horrible
+		/*
+		 * All long-lived kernel loops need to check with this horrible
 		 * thing called the freezer.  If the Host is trying to suspend,
-		 * it stops us. */
+		 * it stops us.
+		 */
 		try_to_freeze();
 
-		/* Just make absolutely sure the Guest is still alive.  One of
-		 * those hypercalls could have been fatal, for example. */
+		/*
+		 * Just make absolutely sure the Guest is still alive.  One of
+		 * those hypercalls could have been fatal, for example.
+		 */
 		if (cpu->lg->dead)
 			break;
 
-		/* If the Guest asked to be stopped, we sleep.  The Guest's
-		 * clock timer will wake us. */
+		/*
+		 * If the Guest asked to be stopped, we sleep.  The Guest's
+		 * clock timer will wake us.
+		 */
 		if (cpu->halted) {
 			set_current_state(TASK_INTERRUPTIBLE);
-			/* Just before we sleep, make sure no interrupt snuck in
-			 * which we should be doing. */
+			/*
+			 * Just before we sleep, make sure no interrupt snuck in
+			 * which we should be doing.
+			 */
 			if (interrupt_pending(cpu, &more) < LGUEST_IRQS)
 				set_current_state(TASK_RUNNING);
 			else
@@ -239,8 +276,10 @@ int run_guest(struct lg_cpu *cpu, unsigned long __user *user)
 			continue;
 		}
 
-		/* OK, now we're ready to jump into the Guest.  First we put up
-		 * the "Do Not Disturb" sign: */
+		/*
+		 * OK, now we're ready to jump into the Guest.  First we put up
+		 * the "Do Not Disturb" sign:
+		 */
 		local_irq_disable();
 
 		/* Actually run the Guest until something happens. */
@@ -327,8 +366,10 @@ static void __exit fini(void)
 }
 /*:*/
 
-/* The Host side of lguest can be a module.  This is a nice way for people to
- * play with it.  */
+/*
+ * The Host side of lguest can be a module.  This is a nice way for people to
+ * play with it.
+ */
 module_init(init);
 module_exit(fini);
 MODULE_LICENSE("GPL");
diff --git a/drivers/lguest/hypercalls.c b/drivers/lguest/hypercalls.c
index c29ffa1..83511eb 100644
--- a/drivers/lguest/hypercalls.c
+++ b/drivers/lguest/hypercalls.c
@@ -1,8 +1,10 @@
-/*P:500 Just as userspace programs request kernel operations through a system
+/*P:500
+ * Just as userspace programs request kernel operations through a system
  * call, the Guest requests Host operations through a "hypercall".  You might
  * notice this nomenclature doesn't really follow any logic, but the name has
  * been around for long enough that we're stuck with it.  As you'd expect, this
- * code is basically a one big switch statement. :*/
+ * code is basically a one big switch statement.
+:*/
 
 /*  Copyright (C) 2006 Rusty Russell IBM Corporation
 
@@ -28,30 +30,41 @@
 #include <asm/pgtable.h>
 #include "lg.h"
 
-/*H:120 This is the core hypercall routine: where the Guest gets what it wants.
- * Or gets killed.  Or, in the case of LHCALL_SHUTDOWN, both. */
+/*H:120
+ * This is the core hypercall routine: where the Guest gets what it wants.
+ * Or gets killed.  Or, in the case of LHCALL_SHUTDOWN, both.
+ */
 static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
 {
 	switch (args->arg0) {
 	case LHCALL_FLUSH_ASYNC:
-		/* This call does nothing, except by breaking out of the Guest
-		 * it makes us process all the asynchronous hypercalls. */
+		/*
+		 * This call does nothing, except by breaking out of the Guest
+		 * it makes us process all the asynchronous hypercalls.
+		 */
 		break;
 	case LHCALL_SEND_INTERRUPTS:
-		/* This call does nothing too, but by breaking out of the Guest
-		 * it makes us process any pending interrupts. */
+		/*
+		 * This call does nothing too, but by breaking out of the Guest
+		 * it makes us process any pending interrupts.
+		 */
 		break;
 	case LHCALL_LGUEST_INIT:
-		/* You can't get here unless you're already initialized.  Don't
-		 * do that. */
+		/*
+		 * You can't get here unless you're already initialized.  Don't
+		 * do that.
+		 */
 		kill_guest(cpu, "already have lguest_data");
 		break;
 	case LHCALL_SHUTDOWN: {
-		/* Shutdown is such a trivial hypercall that we do it in four
-		 * lines right here. */
 		char msg[128];
-		/* If the lgread fails, it will call kill_guest() itself; the
-		 * kill_guest() with the message will be ignored. */
+		/*
+		 * Shutdown is such a trivial hypercall that we do it in five
+		 * lines right here.
+		 *
+		 * If the lgread fails, it will call kill_guest() itself; the
+		 * kill_guest() with the message will be ignored.
+		 */
 		__lgread(cpu, msg, args->arg1, sizeof(msg));
 		msg[sizeof(msg)-1] = '\0';
 		kill_guest(cpu, "CRASH: %s", msg);
@@ -60,16 +73,17 @@ static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
 		break;
 	}
 	case LHCALL_FLUSH_TLB:
-		/* FLUSH_TLB comes in two flavors, depending on the
-		 * argument: */
+		/* FLUSH_TLB comes in two flavors, depending on the argument: */
 		if (args->arg1)
 			guest_pagetable_clear_all(cpu);
 		else
 			guest_pagetable_flush_user(cpu);
 		break;
 
-	/* All these calls simply pass the arguments through to the right
-	 * routines. */
+	/*
+	 * All these calls simply pass the arguments through to the right
+	 * routines.
+	 */
 	case LHCALL_NEW_PGTABLE:
 		guest_new_pagetable(cpu, args->arg1);
 		break;
@@ -112,15 +126,16 @@ static void do_hcall(struct lg_cpu *cpu, struct hcall_args *args)
 			kill_guest(cpu, "Bad hypercall %li\n", args->arg0);
 	}
 }
-/*:*/
 
-/*H:124 Asynchronous hypercalls are easy: we just look in the array in the
+/*H:124
+ * Asynchronous hypercalls are easy: we just look in the array in the
  * Guest's "struct lguest_data" to see if any new ones are marked "ready".
  *
  * We are careful to do these in order: obviously we respect the order the
  * Guest put them in the ring, but we also promise the Guest that they will
  * happen before any normal hypercall (which is why we check this before
- * checking for a normal hcall). */
+ * checking for a normal hcall).
+ */
 static void do_async_hcalls(struct lg_cpu *cpu)
 {
 	unsigned int i;
@@ -133,22 +148,28 @@ static void do_async_hcalls(struct lg_cpu *cpu)
 	/* We process "struct lguest_data"s hcalls[] ring once. */
 	for (i = 0; i < ARRAY_SIZE(st); i++) {
 		struct hcall_args args;
-		/* We remember where we were up to from last time.  This makes
+		/*
+		 * We remember where we were up to from last time.  This makes
 		 * sure that the hypercalls are done in the order the Guest
-		 * places them in the ring. */
+		 * places them in the ring.
+		 */
 		unsigned int n = cpu->next_hcall;
 
 		/* 0xFF means there's no call here (yet). */
 		if (st[n] == 0xFF)
 			break;
 
-		/* OK, we have hypercall.  Increment the "next_hcall" cursor,
-		 * and wrap back to 0 if we reach the end. */
+		/*
+		 * OK, we have hypercall.  Increment the "next_hcall" cursor,
+		 * and wrap back to 0 if we reach the end.
+		 */
 		if (++cpu->next_hcall == LHCALL_RING_SIZE)
 			cpu->next_hcall = 0;
 
-		/* Copy the hypercall arguments into a local copy of
-		 * the hcall_args struct. */
+		/*
+		 * Copy the hypercall arguments into a local copy of the
+		 * hcall_args struct.
+		 */
 		if (copy_from_user(&args, &cpu->lg->lguest_data->hcalls[n],
 				   sizeof(struct hcall_args))) {
 			kill_guest(cpu, "Fetching async hypercalls");
@@ -164,19 +185,25 @@ static void do_async_hcalls(struct lg_cpu *cpu)
 			break;
 		}
 
-		/* Stop doing hypercalls if they want to notify the Launcher:
-		 * it needs to service this first. */
+		/*
+		 * Stop doing hypercalls if they want to notify the Launcher:
+		 * it needs to service this first.
+		 */
 		if (cpu->pending_notify)
 			break;
 	}
 }
 
-/* Last of all, we look at what happens first of all.  The very first time the
- * Guest makes a hypercall, we end up here to set things up: */
+/*
+ * Last of all, we look at what happens first of all.  The very first time the
+ * Guest makes a hypercall, we end up here to set things up:
+ */
 static void initialize(struct lg_cpu *cpu)
 {
-	/* You can't do anything until you're initialized.  The Guest knows the
-	 * rules, so we're unforgiving here. */
+	/*
+	 * You can't do anything until you're initialized.  The Guest knows the
+	 * rules, so we're unforgiving here.
+	 */
 	if (cpu->hcall->arg0 != LHCALL_LGUEST_INIT) {
 		kill_guest(cpu, "hypercall %li before INIT", cpu->hcall->arg0);
 		return;
@@ -185,32 +212,44 @@ static void initialize(struct lg_cpu *cpu)
 	if (lguest_arch_init_hypercalls(cpu))
 		kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data);
 
-	/* The Guest tells us where we're not to deliver interrupts by putting
-	 * the range of addresses into "struct lguest_data". */
+	/*
+	 * The Guest tells us where we're not to deliver interrupts by putting
+	 * the range of addresses into "struct lguest_data".
+	 */
 	if (get_user(cpu->lg->noirq_start, &cpu->lg->lguest_data->noirq_start)
 	    || get_user(cpu->lg->noirq_end, &cpu->lg->lguest_data->noirq_end))
 		kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data);
 
-	/* We write the current time into the Guest's data page once so it can
-	 * set its clock. */
+	/*
+	 * We write the current time into the Guest's data page once so it can
+	 * set its clock.
+	 */
 	write_timestamp(cpu);
 
 	/* page_tables.c will also do some setup. */
 	page_table_guest_data_init(cpu);
 
-	/* This is the one case where the above accesses might have been the
+	/*
+	 * This is the one case where the above accesses might have been the
 	 * first write to a Guest page.  This may have caused a copy-on-write
 	 * fault, but the old page might be (read-only) in the Guest
-	 * pagetable. */
+	 * pagetable.
+	 */
 	guest_pagetable_clear_all(cpu);
 }
 /*:*/
 
-/*M:013 If a Guest reads from a page (so creates a mapping) that it has never
+/*M:013
+ * If a Guest reads from a page (so creates a mapping) that it has never
  * written to, and then the Launcher writes to it (ie. the output of a virtual
  * device), the Guest will still see the old page.  In practice, this never
  * happens: why would the Guest read a page which it has never written to?  But
- * a similar scenario might one day bite us, so it's worth mentioning. :*/
+ * a similar scenario might one day bite us, so it's worth mentioning.
+ *
+ * Note that if we used a shared anonymous mapping in the Launcher instead of
+ * mapping /dev/zero private, we wouldn't worry about cop-on-write.  And we
+ * need that to switch the Launcher to processes (away from threads) anyway.
+:*/
 
 /*H:100
  * Hypercalls
@@ -229,17 +268,22 @@ void do_hypercalls(struct lg_cpu *cpu)
 		return;
 	}
 
-	/* The Guest has initialized.
+	/*
+	 * The Guest has initialized.
 	 *
-	 * Look in the hypercall ring for the async hypercalls: */
+	 * Look in the hypercall ring for the async hypercalls:
+	 */
 	do_async_hcalls(cpu);
 
-	/* If we stopped reading the hypercall ring because the Guest did a
+	/*
+	 * If we stopped reading the hypercall ring because the Guest did a
 	 * NOTIFY to the Launcher, we want to return now.  Otherwise we do
-	 * the hypercall. */
+	 * the hypercall.
+	 */
 	if (!cpu->pending_notify) {
 		do_hcall(cpu, cpu->hcall);
-		/* Tricky point: we reset the hcall pointer to mark the
+		/*
+		 * Tricky point: we reset the hcall pointer to mark the
 		 * hypercall as "done".  We use the hcall pointer rather than
 		 * the trap number to indicate a hypercall is pending.
 		 * Normally it doesn't matter: the Guest will run again and
@@ -248,13 +292,16 @@ void do_hypercalls(struct lg_cpu *cpu)
 		 * However, if we are signalled or the Guest sends I/O to the
 		 * Launcher, the run_guest() loop will exit without running the
 		 * Guest.  When it comes back it would try to re-run the
-		 * hypercall.  Finding that bug sucked. */
+		 * hypercall.  Finding that bug sucked.
+		 */
 		cpu->hcall = NULL;
 	}
 }
 
-/* This routine supplies the Guest with time: it's used for wallclock time at
- * initial boot and as a rough time source if the TSC isn't available. */
+/*
+ * This routine supplies the Guest with time: it's used for wallclock time at
+ * initial boot and as a rough time source if the TSC isn't available.
+ */
 void write_timestamp(struct lg_cpu *cpu)
 {
 	struct timespec now;
diff --git a/drivers/lguest/interrupts_and_traps.c b/drivers/lguest/interrupts_and_traps.c
index 0e9067b..1864818 100644
--- a/drivers/lguest/interrupts_and_traps.c
+++ b/drivers/lguest/interrupts_and_traps.c
@@ -1,4 +1,5 @@
-/*P:800 Interrupts (traps) are complicated enough to earn their own file.
+/*P:800
+ * Interrupts (traps) are complicated enough to earn their own file.
  * There are three classes of interrupts:
  *
  * 1) Real hardware interrupts which occur while we're running the Guest,
@@ -10,7 +11,8 @@
  * just like real hardware would deliver them.  Traps from the Guest can be set
  * up to go directly back into the Guest, but sometimes the Host wants to see
  * them first, so we also have a way of "reflecting" them into the Guest as if
- * they had been delivered to it directly. :*/
+ * they had been delivered to it directly.
+:*/
 #include <linux/uaccess.h>
 #include <linux/interrupt.h>
 #include <linux/module.h>
@@ -26,8 +28,10 @@ static unsigned long idt_address(u32 lo, u32 hi)
 	return (lo & 0x0000FFFF) | (hi & 0xFFFF0000);
 }
 
-/* The "type" of the interrupt handler is a 4 bit field: we only support a
- * couple of types. */
+/*
+ * The "type" of the interrupt handler is a 4 bit field: we only support a
+ * couple of types.
+ */
 static int idt_type(u32 lo, u32 hi)
 {
 	return (hi >> 8) & 0xF;
@@ -39,8 +43,10 @@ static bool idt_present(u32 lo, u32 hi)
 	return (hi & 0x8000);
 }
 
-/* We need a helper to "push" a value onto the Guest's stack, since that's a
- * big part of what delivering an interrupt does. */
+/*
+ * We need a helper to "push" a value onto the Guest's stack, since that's a
+ * big part of what delivering an interrupt does.
+ */
 static void push_guest_stack(struct lg_cpu *cpu, unsigned long *gstack, u32 val)
 {
 	/* Stack grows upwards: move stack then write value. */
@@ -48,7 +54,8 @@ static void push_guest_stack(struct lg_cpu *cpu, unsigned long *gstack, u32 val)
 	lgwrite(cpu, *gstack, u32, val);
 }
 
-/*H:210 The set_guest_interrupt() routine actually delivers the interrupt or
+/*H:210
+ * The set_guest_interrupt() routine actually delivers the interrupt or
  * trap.  The mechanics of delivering traps and interrupts to the Guest are the
  * same, except some traps have an "error code" which gets pushed onto the
  * stack as well: the caller tells us if this is one.
@@ -59,7 +66,8 @@ static void push_guest_stack(struct lg_cpu *cpu, unsigned long *gstack, u32 val)
  *
  * We set up the stack just like the CPU does for a real interrupt, so it's
  * identical for the Guest (and the standard "iret" instruction will undo
- * it). */
+ * it).
+ */
 static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi,
 				bool has_err)
 {
@@ -67,20 +75,26 @@ static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi,
 	u32 eflags, ss, irq_enable;
 	unsigned long virtstack;
 
-	/* There are two cases for interrupts: one where the Guest is already
+	/*
+	 * There are two cases for interrupts: one where the Guest is already
 	 * in the kernel, and a more complex one where the Guest is in
-	 * userspace.  We check the privilege level to find out. */
+	 * userspace.  We check the privilege level to find out.
+	 */
 	if ((cpu->regs->ss&0x3) != GUEST_PL) {
-		/* The Guest told us their kernel stack with the SET_STACK
-		 * hypercall: both the virtual address and the segment */
+		/*
+		 * The Guest told us their kernel stack with the SET_STACK
+		 * hypercall: both the virtual address and the segment.
+		 */
 		virtstack = cpu->esp1;
 		ss = cpu->ss1;
 
 		origstack = gstack = guest_pa(cpu, virtstack);
-		/* We push the old stack segment and pointer onto the new
+		/*
+		 * We push the old stack segment and pointer onto the new
 		 * stack: when the Guest does an "iret" back from the interrupt
 		 * handler the CPU will notice they're dropping privilege
-		 * levels and expect these here. */
+		 * levels and expect these here.
+		 */
 		push_guest_stack(cpu, &gstack, cpu->regs->ss);
 		push_guest_stack(cpu, &gstack, cpu->regs->esp);
 	} else {
@@ -91,18 +105,22 @@ static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi,
 		origstack = gstack = guest_pa(cpu, virtstack);
 	}
 
-	/* Remember that we never let the Guest actually disable interrupts, so
+	/*
+	 * Remember that we never let the Guest actually disable interrupts, so
 	 * the "Interrupt Flag" bit is always set.  We copy that bit from the
 	 * Guest's "irq_enabled" field into the eflags word: we saw the Guest
-	 * copy it back in "lguest_iret". */
+	 * copy it back in "lguest_iret".
+	 */
 	eflags = cpu->regs->eflags;
 	if (get_user(irq_enable, &cpu->lg->lguest_data->irq_enabled) == 0
 	    && !(irq_enable & X86_EFLAGS_IF))
 		eflags &= ~X86_EFLAGS_IF;
 
-	/* An interrupt is expected to push three things on the stack: the old
+	/*
+	 * An interrupt is expected to push three things on the stack: the old
 	 * "eflags" word, the old code segment, and the old instruction
-	 * pointer. */
+	 * pointer.
+	 */
 	push_guest_stack(cpu, &gstack, eflags);
 	push_guest_stack(cpu, &gstack, cpu->regs->cs);
 	push_guest_stack(cpu, &gstack, cpu->regs->eip);
@@ -111,15 +129,19 @@ static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi,
 	if (has_err)
 		push_guest_stack(cpu, &gstack, cpu->regs->errcode);
 
-	/* Now we've pushed all the old state, we change the stack, the code
-	 * segment and the address to execute. */
+	/*
+	 * Now we've pushed all the old state, we change the stack, the code
+	 * segment and the address to execute.
+	 */
 	cpu->regs->ss = ss;
 	cpu->regs->esp = virtstack + (gstack - origstack);
 	cpu->regs->cs = (__KERNEL_CS|GUEST_PL);
 	cpu->regs->eip = idt_address(lo, hi);
 
-	/* There are two kinds of interrupt handlers: 0xE is an "interrupt
-	 * gate" which expects interrupts to be disabled on entry. */
+	/*
+	 * There are two kinds of interrupt handlers: 0xE is an "interrupt
+	 * gate" which expects interrupts to be disabled on entry.
+	 */
 	if (idt_type(lo, hi) == 0xE)
 		if (put_user(0, &cpu->lg->lguest_data->irq_enabled))
 			kill_guest(cpu, "Disabling interrupts");
@@ -130,7 +152,8 @@ static void set_guest_interrupt(struct lg_cpu *cpu, u32 lo, u32 hi,
  *
  * interrupt_pending() returns the first pending interrupt which isn't blocked
  * by the Guest.  It is called before every entry to the Guest, and just before
- * we go to sleep when the Guest has halted itself. */
+ * we go to sleep when the Guest has halted itself.
+ */
 unsigned int interrupt_pending(struct lg_cpu *cpu, bool *more)
 {
 	unsigned int irq;
@@ -140,8 +163,10 @@ unsigned int interrupt_pending(struct lg_cpu *cpu, bool *more)
 	if (!cpu->lg->lguest_data)
 		return LGUEST_IRQS;
 
-	/* Take our "irqs_pending" array and remove any interrupts the Guest
-	 * wants blocked: the result ends up in "blk". */
+	/*
+	 * Take our "irqs_pending" array and remove any interrupts the Guest
+	 * wants blocked: the result ends up in "blk".
+	 */
 	if (copy_from_user(&blk, cpu->lg->lguest_data->blocked_interrupts,
 			   sizeof(blk)))
 		return LGUEST_IRQS;
@@ -154,16 +179,20 @@ unsigned int interrupt_pending(struct lg_cpu *cpu, bool *more)
 	return irq;
 }
 
-/* This actually diverts the Guest to running an interrupt handler, once an
- * interrupt has been identified by interrupt_pending(). */
+/*
+ * This actually diverts the Guest to running an interrupt handler, once an
+ * interrupt has been identified by interrupt_pending().
+ */
 void try_deliver_interrupt(struct lg_cpu *cpu, unsigned int irq, bool more)
 {
 	struct desc_struct *idt;
 
 	BUG_ON(irq >= LGUEST_IRQS);
 
-	/* They may be in the middle of an iret, where they asked us never to
-	 * deliver interrupts. */
+	/*
+	 * They may be in the middle of an iret, where they asked us never to
+	 * deliver interrupts.
+	 */
 	if (cpu->regs->eip >= cpu->lg->noirq_start &&
 	   (cpu->regs->eip < cpu->lg->noirq_end))
 		return;
@@ -187,29 +216,37 @@ void try_deliver_interrupt(struct lg_cpu *cpu, unsigned int irq, bool more)
 		}
 	}
 
-	/* Look at the IDT entry the Guest gave us for this interrupt.  The
+	/*
+	 * Look at the IDT entry the Guest gave us for this interrupt.  The
 	 * first 32 (FIRST_EXTERNAL_VECTOR) entries are for traps, so we skip
-	 * over them. */
+	 * over them.
+	 */
 	idt = &cpu->arch.idt[FIRST_EXTERNAL_VECTOR+irq];
 	/* If they don't have a handler (yet?), we just ignore it */
 	if (idt_present(idt->a, idt->b)) {
 		/* OK, mark it no longer pending and deliver it. */
 		clear_bit(irq, cpu->irqs_pending);
-		/* set_guest_interrupt() takes the interrupt descriptor and a
+		/*
+		 * set_guest_interrupt() takes the interrupt descriptor and a
 		 * flag to say whether this interrupt pushes an error code onto
-		 * the stack as well: virtual interrupts never do. */
+		 * the stack as well: virtual interrupts never do.
+		 */
 		set_guest_interrupt(cpu, idt->a, idt->b, false);
 	}
 
-	/* Every time we deliver an interrupt, we update the timestamp in the
+	/*
+	 * Every time we deliver an interrupt, we update the timestamp in the
 	 * Guest's lguest_data struct.  It would be better for the Guest if we
 	 * did this more often, but it can actually be quite slow: doing it
 	 * here is a compromise which means at least it gets updated every
-	 * timer interrupt. */
+	 * timer interrupt.
+	 */
 	write_timestamp(cpu);
 
-	/* If there are no other interrupts we want to deliver, clear
-	 * the pending flag. */
+	/*
+	 * If there are no other interrupts we want to deliver, clear
+	 * the pending flag.
+	 */
 	if (!more)
 		put_user(0, &cpu->lg->lguest_data->irq_pending);
 }
@@ -217,24 +254,29 @@ void try_deliver_interrupt(struct lg_cpu *cpu, unsigned int irq, bool more)
 /* And this is the routine when we want to set an interrupt for the Guest. */
 void set_interrupt(struct lg_cpu *cpu, unsigned int irq)
 {
-	/* Next time the Guest runs, the core code will see if it can deliver
-	 * this interrupt. */
+	/*
+	 * Next time the Guest runs, the core code will see if it can deliver
+	 * this interrupt.
+	 */
 	set_bit(irq, cpu->irqs_pending);
 
-	/* Make sure it sees it; it might be asleep (eg. halted), or
-	 * running the Guest right now, in which case kick_process()
-	 * will knock it out. */
+	/*
+	 * Make sure it sees it; it might be asleep (eg. halted), or running
+	 * the Guest right now, in which case kick_process() will knock it out.
+	 */
 	if (!wake_up_process(cpu->tsk))
 		kick_process(cpu->tsk);
 }
 /*:*/
 
-/* Linux uses trap 128 for system calls.  Plan9 uses 64, and Ron Minnich sent
+/*
+ * Linux uses trap 128 for system calls.  Plan9 uses 64, and Ron Minnich sent
  * me a patch, so we support that too.  It'd be a big step for lguest if half
  * the Plan 9 user base were to start using it.
  *
  * Actually now I think of it, it's possible that Ron *is* half the Plan 9
- * userbase.  Oh well. */
+ * userbase.  Oh well.
+ */
 static bool could_be_syscall(unsigned int num)
 {
 	/* Normal Linux SYSCALL_VECTOR or reserved vector? */
@@ -274,9 +316,11 @@ void free_interrupts(void)
 		clear_bit(syscall_vector, used_vectors);
 }
 
-/*H:220 Now we've got the routines to deliver interrupts, delivering traps like
+/*H:220
+ * Now we've got the routines to deliver interrupts, delivering traps like
  * page fault is easy.  The only trick is that Intel decided that some traps
- * should have error codes: */
+ * should have error codes:
+ */
 static bool has_err(unsigned int trap)
 {
 	return (trap == 8 || (trap >= 10 && trap <= 14) || trap == 17);
@@ -285,13 +329,17 @@ static bool has_err(unsigned int trap)
 /* deliver_trap() returns true if it could deliver the trap. */
 bool deliver_trap(struct lg_cpu *cpu, unsigned int num)
 {
-	/* Trap numbers are always 8 bit, but we set an impossible trap number
-	 * for traps inside the Switcher, so check that here. */
+	/*
+	 * Trap numbers are always 8 bit, but we set an impossible trap number
+	 * for traps inside the Switcher, so check that here.
+	 */
 	if (num >= ARRAY_SIZE(cpu->arch.idt))
 		return false;
 
-	/* Early on the Guest hasn't set the IDT entries (or maybe it put a
-	 * bogus one in): if we fail here, the Guest will be killed. */
+	/*
+	 * Early on the Guest hasn't set the IDT entries (or maybe it put a
+	 * bogus one in): if we fail here, the Guest will be killed.
+	 */
 	if (!idt_present(cpu->arch.idt[num].a, cpu->arch.idt[num].b))
 		return false;
 	set_guest_interrupt(cpu, cpu->arch.idt[num].a,
@@ -299,7 +347,8 @@ bool deliver_trap(struct lg_cpu *cpu, unsigned int num)
 	return true;
 }
 
-/*H:250 Here's the hard part: returning to the Host every time a trap happens
+/*H:250
+ * Here's the hard part: returning to the Host every time a trap happens
  * and then calling deliver_trap() and re-entering the Guest is slow.
  * Particularly because Guest userspace system calls are traps (usually trap
  * 128).
@@ -311,69 +360,87 @@ bool deliver_trap(struct lg_cpu *cpu, unsigned int num)
  * the other hypervisors would beat it up at lunchtime.
  *
  * This routine indicates if a particular trap number could be delivered
- * directly. */
+ * directly.
+ */
 static bool direct_trap(unsigned int num)
 {
-	/* Hardware interrupts don't go to the Guest at all (except system
-	 * call). */
+	/*
+	 * Hardware interrupts don't go to the Guest at all (except system
+	 * call).
+	 */
 	if (num >= FIRST_EXTERNAL_VECTOR && !could_be_syscall(num))
 		return false;
 
-	/* The Host needs to see page faults (for shadow paging and to save the
+	/*
+	 * The Host needs to see page faults (for shadow paging and to save the
 	 * fault address), general protection faults (in/out emulation) and
 	 * device not available (TS handling), invalid opcode fault (kvm hcall),
-	 * and of course, the hypercall trap. */
+	 * and of course, the hypercall trap.
+	 */
 	return num != 14 && num != 13 && num != 7 &&
 			num != 6 && num != LGUEST_TRAP_ENTRY;
 }
 /*:*/
 
-/*M:005 The Guest has the ability to turn its interrupt gates into trap gates,
+/*M:005
+ * The Guest has the ability to turn its interrupt gates into trap gates,
  * if it is careful.  The Host will let trap gates can go directly to the
  * Guest, but the Guest needs the interrupts atomically disabled for an
  * interrupt gate.  It can do this by pointing the trap gate at instructions
- * within noirq_start and noirq_end, where it can safely disable interrupts. */
+ * within noirq_start and noirq_end, where it can safely disable interrupts.
+ */
 
-/*M:006 The Guests do not use the sysenter (fast system call) instruction,
+/*M:006
+ * The Guests do not use the sysenter (fast system call) instruction,
  * because it's hardcoded to enter privilege level 0 and so can't go direct.
  * It's about twice as fast as the older "int 0x80" system call, so it might
  * still be worthwhile to handle it in the Switcher and lcall down to the
  * Guest.  The sysenter semantics are hairy tho: search for that keyword in
- * entry.S :*/
+ * entry.S
+:*/
 
-/*H:260 When we make traps go directly into the Guest, we need to make sure
+/*H:260
+ * When we make traps go directly into the Guest, we need to make sure
  * the kernel stack is valid (ie. mapped in the page tables).  Otherwise, the
  * CPU trying to deliver the trap will fault while trying to push the interrupt
  * words on the stack: this is called a double fault, and it forces us to kill
  * the Guest.
  *
- * Which is deeply unfair, because (literally!) it wasn't the Guests' fault. */
+ * Which is deeply unfair, because (literally!) it wasn't the Guests' fault.
+ */
 void pin_stack_pages(struct lg_cpu *cpu)
 {
 	unsigned int i;
 
-	/* Depending on the CONFIG_4KSTACKS option, the Guest can have one or
-	 * two pages of stack space. */
+	/*
+	 * Depending on the CONFIG_4KSTACKS option, the Guest can have one or
+	 * two pages of stack space.
+	 */
 	for (i = 0; i < cpu->lg->stack_pages; i++)
-		/* The stack grows *upwards*, so the address we're given is the
+		/*
+		 * The stack grows *upwards*, so the address we're given is the
 		 * start of the page after the kernel stack.  Subtract one to
 		 * get back onto the first stack page, and keep subtracting to
-		 * get to the rest of the stack pages. */
+		 * get to the rest of the stack pages.
+		 */
 		pin_page(cpu, cpu->esp1 - 1 - i * PAGE_SIZE);
 }
 
-/* Direct traps also mean that we need to know whenever the Guest wants to use
+/*
+ * Direct traps also mean that we need to know whenever the Guest wants to use
  * a different kernel stack, so we can change the IDT entries to use that
  * stack.  The IDT entries expect a virtual address, so unlike most addresses
  * the Guest gives us, the "esp" (stack pointer) value here is virtual, not
  * physical.
  *
  * In Linux each process has its own kernel stack, so this happens a lot: we
- * change stacks on each context switch. */
+ * change stacks on each context switch.
+ */
 void guest_set_stack(struct lg_cpu *cpu, u32 seg, u32 esp, unsigned int pages)
 {
-	/* You are not allowed have a stack segment with privilege level 0: bad
-	 * Guest! */
+	/*
+	 * You're not allowed a stack segment with privilege level 0: bad Guest!
+	 */
 	if ((seg & 0x3) != GUEST_PL)
 		kill_guest(cpu, "bad stack segment %i", seg);
 	/* We only expect one or two stack pages. */
@@ -387,11 +454,15 @@ void guest_set_stack(struct lg_cpu *cpu, u32 seg, u32 esp, unsigned int pages)
 	pin_stack_pages(cpu);
 }
 
-/* All this reference to mapping stacks leads us neatly into the other complex
- * part of the Host: page table handling. */
+/*
+ * All this reference to mapping stacks leads us neatly into the other complex
+ * part of the Host: page table handling.
+ */
 
-/*H:235 This is the routine which actually checks the Guest's IDT entry and
- * transfers it into the entry in "struct lguest": */
+/*H:235
+ * This is the routine which actually checks the Guest's IDT entry and
+ * transfers it into the entry in "struct lguest":
+ */
 static void set_trap(struct lg_cpu *cpu, struct desc_struct *trap,
 		     unsigned int num, u32 lo, u32 hi)
 {
@@ -407,30 +478,38 @@ static void set_trap(struct lg_cpu *cpu, struct desc_struct *trap,
 	if (type != 0xE && type != 0xF)
 		kill_guest(cpu, "bad IDT type %i", type);
 
-	/* We only copy the handler address, present bit, privilege level and
+	/*
+	 * We only copy the handler address, present bit, privilege level and
 	 * type.  The privilege level controls where the trap can be triggered
 	 * manually with an "int" instruction.  This is usually GUEST_PL,
-	 * except for system calls which userspace can use. */
+	 * except for system calls which userspace can use.
+	 */
 	trap->a = ((__KERNEL_CS|GUEST_PL)<<16) | (lo&0x0000FFFF);
 	trap->b = (hi&0xFFFFEF00);
 }
 
-/*H:230 While we're here, dealing with delivering traps and interrupts to the
+/*H:230
+ * While we're here, dealing with delivering traps and interrupts to the
  * Guest, we might as well complete the picture: how the Guest tells us where
  * it wants them to go.  This would be simple, except making traps fast
  * requires some tricks.
  *
  * We saw the Guest setting Interrupt Descriptor Table (IDT) entries with the
- * LHCALL_LOAD_IDT_ENTRY hypercall before: that comes here. */
+ * LHCALL_LOAD_IDT_ENTRY hypercall before: that comes here.
+ */
 void load_guest_idt_entry(struct lg_cpu *cpu, unsigned int num, u32 lo, u32 hi)
 {
-	/* Guest never handles: NMI, doublefault, spurious interrupt or
-	 * hypercall.  We ignore when it tries to set them. */
+	/*
+	 * Guest never handles: NMI, doublefault, spurious interrupt or
+	 * hypercall.  We ignore when it tries to set them.
+	 */
 	if (num == 2 || num == 8 || num == 15 || num == LGUEST_TRAP_ENTRY)
 		return;
 
-	/* Mark the IDT as changed: next time the Guest runs we'll know we have
-	 * to copy this again. */
+	/*
+	 * Mark the IDT as changed: next time the Guest runs we'll know we have
+	 * to copy this again.
+	 */
 	cpu->changed |= CHANGED_IDT;
 
 	/* Check that the Guest doesn't try to step outside the bounds. */
@@ -440,9 +519,11 @@ void load_guest_idt_entry(struct lg_cpu *cpu, unsigned int num, u32 lo, u32 hi)
 		set_trap(cpu, &cpu->arch.idt[num], num, lo, hi);
 }
 
-/* The default entry for each interrupt points into the Switcher routines which
+/*
+ * The default entry for each interrupt points into the Switcher routines which
  * simply return to the Host.  The run_guest() loop will then call
- * deliver_trap() to bounce it back into the Guest. */
+ * deliver_trap() to bounce it back into the Guest.
+ */
 static void default_idt_entry(struct desc_struct *idt,
 			      int trap,
 			      const unsigned long handler,
@@ -451,13 +532,17 @@ static void default_idt_entry(struct desc_struct *idt,
 	/* A present interrupt gate. */
 	u32 flags = 0x8e00;
 
-	/* Set the privilege level on the entry for the hypercall: this allows
-	 * the Guest to use the "int" instruction to trigger it. */
+	/*
+	 * Set the privilege level on the entry for the hypercall: this allows
+	 * the Guest to use the "int" instruction to trigger it.
+	 */
 	if (trap == LGUEST_TRAP_ENTRY)
 		flags |= (GUEST_PL << 13);
 	else if (base)
-		/* Copy priv. level from what Guest asked for.  This allows
-		 * debug (int 3) traps from Guest userspace, for example. */
+		/*
+		 * Copy privilege level from what Guest asked for.  This allows
+		 * debug (int 3) traps from Guest userspace, for example.
+		 */
 		flags |= (base->b & 0x6000);
 
 	/* Now pack it into the IDT entry in its weird format. */
@@ -475,16 +560,20 @@ void setup_default_idt_entries(struct lguest_ro_state *state,
 		default_idt_entry(&state->guest_idt[i], i, def[i], NULL);
 }
 
-/*H:240 We don't use the IDT entries in the "struct lguest" directly, instead
+/*H:240
+ * We don't use the IDT entries in the "struct lguest" directly, instead
  * we copy them into the IDT which we've set up for Guests on this CPU, just
- * before we run the Guest.  This routine does that copy. */
+ * before we run the Guest.  This routine does that copy.
+ */
 void copy_traps(const struct lg_cpu *cpu, struct desc_struct *idt,
 		const unsigned long *def)
 {
 	unsigned int i;
 
-	/* We can simply copy the direct traps, otherwise we use the default
-	 * ones in the Switcher: they will return to the Host. */
+	/*
+	 * We can simply copy the direct traps, otherwise we use the default
+	 * ones in the Switcher: they will return to the Host.
+	 */
 	for (i = 0; i < ARRAY_SIZE(cpu->arch.idt); i++) {
 		const struct desc_struct *gidt = &cpu->arch.idt[i];
 
@@ -492,14 +581,16 @@ void copy_traps(const struct lg_cpu *cpu, struct desc_struct *idt,
 		if (!direct_trap(i))
 			continue;
 
-		/* Only trap gates (type 15) can go direct to the Guest.
+		/*
+		 * Only trap gates (type 15) can go direct to the Guest.
 		 * Interrupt gates (type 14) disable interrupts as they are
 		 * entered, which we never let the Guest do.  Not present
 		 * entries (type 0x0) also can't go direct, of course.
 		 *
 		 * If it can't go direct, we still need to copy the priv. level:
 		 * they might want to give userspace access to a software
-		 * interrupt. */
+		 * interrupt.
+		 */
 		if (idt_type(gidt->a, gidt->b) == 0xF)
 			idt[i] = *gidt;
 		else
@@ -518,7 +609,8 @@ void copy_traps(const struct lg_cpu *cpu, struct desc_struct *idt,
  * the next timer interrupt (in nanoseconds).  We use the high-resolution timer
  * infrastructure to set a callback at that time.
  *
- * 0 means "turn off the clock". */
+ * 0 means "turn off the clock".
+ */
 void guest_set_clockevent(struct lg_cpu *cpu, unsigned long delta)
 {
 	ktime_t expires;
@@ -529,9 +621,11 @@ void guest_set_clockevent(struct lg_cpu *cpu, unsigned long delta)
 		return;
 	}
 
-	/* We use wallclock time here, so the Guest might not be running for
+	/*
+	 * We use wallclock time here, so the Guest might not be running for
 	 * all the time between now and the timer interrupt it asked for.  This
-	 * is almost always the right thing to do. */
+	 * is almost always the right thing to do.
+	 */
 	expires = ktime_add_ns(ktime_get_real(), delta);
 	hrtimer_start(&cpu->hrt, expires, HRTIMER_MODE_ABS);
 }
diff --git a/drivers/lguest/lg.h b/drivers/lguest/lg.h
index 01c5919..bc28745 100644
--- a/drivers/lguest/lg.h
+++ b/drivers/lguest/lg.h
@@ -16,15 +16,13 @@
 void free_pagetables(void);
 int init_pagetables(struct page **switcher_page, unsigned int pages);
 
-struct pgdir
-{
+struct pgdir {
 	unsigned long gpgdir;
 	pgd_t *pgdir;
 };
 
 /* We have two pages shared with guests, per cpu.  */
-struct lguest_pages
-{
+struct lguest_pages {
 	/* This is the stack page mapped rw in guest */
 	char spare[PAGE_SIZE - sizeof(struct lguest_regs)];
 	struct lguest_regs regs;
@@ -54,13 +52,13 @@ struct lg_cpu {
 
 	unsigned long pending_notify; /* pfn from LHCALL_NOTIFY */
 
-	/* At end of a page shared mapped over lguest_pages in guest.  */
+	/* At end of a page shared mapped over lguest_pages in guest. */
 	unsigned long regs_page;
 	struct lguest_regs *regs;
 
 	struct lguest_pages *last_pages;
 
-	int cpu_pgd; /* which pgd this cpu is currently using */
+	int cpu_pgd; /* Which pgd this cpu is currently using */
 
 	/* If a hypercall was asked for, this points to the arguments. */
 	struct hcall_args *hcall;
@@ -89,15 +87,17 @@ struct lg_eventfd_map {
 };
 
 /* The private info the thread maintains about the guest. */
-struct lguest
-{
+struct lguest {
 	struct lguest_data __user *lguest_data;
 	struct lg_cpu cpus[NR_CPUS];
 	unsigned int nr_cpus;
 
 	u32 pfn_limit;
-	/* This provides the offset to the base of guest-physical
-	 * memory in the Launcher. */
+
+	/*
+	 * This provides the offset to the base of guest-physical memory in the
+	 * Launcher.
+	 */
 	void __user *mem_base;
 	unsigned long kernel_address;
 
@@ -122,11 +122,13 @@ bool lguest_address_ok(const struct lguest *lg,
 void __lgread(struct lg_cpu *, void *, unsigned long, unsigned);
 void __lgwrite(struct lg_cpu *, unsigned long, const void *, unsigned);
 
-/*H:035 Using memory-copy operations like that is usually inconvient, so we
+/*H:035
+ * Using memory-copy operations like that is usually inconvient, so we
  * have the following helper macros which read and write a specific type (often
  * an unsigned long).
  *
- * This reads into a variable of the given type then returns that. */
+ * This reads into a variable of the given type then returns that.
+ */
 #define lgread(cpu, addr, type)						\
 	({ type _v; __lgread((cpu), &_v, (addr), sizeof(_v)); _v; })
 
@@ -140,9 +142,11 @@ void __lgwrite(struct lg_cpu *, unsigned long, const void *, unsigned);
 
 int run_guest(struct lg_cpu *cpu, unsigned long __user *user);
 
-/* Helper macros to obtain the first 12 or the last 20 bits, this is only the
+/*
+ * Helper macros to obtain the first 12 or the last 20 bits, this is only the
  * first step in the migration to the kernel types.  pte_pfn is already defined
- * in the kernel. */
+ * in the kernel.
+ */
 #define pgd_flags(x)	(pgd_val(x) & ~PAGE_MASK)
 #define pgd_pfn(x)	(pgd_val(x) >> PAGE_SHIFT)
 #define pmd_flags(x)    (pmd_val(x) & ~PAGE_MASK)
diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c
index e082cda..b6200bc 100644
--- a/drivers/lguest/lguest_device.c
+++ b/drivers/lguest/lguest_device.c
@@ -1,10 +1,12 @@
-/*P:050 Lguest guests use a very simple method to describe devices.  It's a
+/*P:050
+ * Lguest guests use a very simple method to describe devices.  It's a
  * series of device descriptors contained just above the top of normal Guest
  * memory.
  *
  * We use the standard "virtio" device infrastructure, which provides us with a
  * console, a network and a block driver.  Each one expects some configuration
- * information and a "virtqueue" or two to send and receive data. :*/
+ * information and a "virtqueue" or two to send and receive data.
+:*/
 #include <linux/init.h>
 #include <linux/bootmem.h>
 #include <linux/lguest_launcher.h>
@@ -20,8 +22,10 @@
 /* The pointer to our (page) of device descriptions. */
 static void *lguest_devices;
 
-/* For Guests, device memory can be used as normal memory, so we cast away the
- * __iomem to quieten sparse. */
+/*
+ * For Guests, device memory can be used as normal memory, so we cast away the
+ * __iomem to quieten sparse.
+ */
 static inline void *lguest_map(unsigned long phys_addr, unsigned long pages)
 {
 	return (__force void *)ioremap_cache(phys_addr, PAGE_SIZE*pages);
@@ -32,8 +36,10 @@ static inline void lguest_unmap(void *addr)
 	iounmap((__force void __iomem *)addr);
 }
 
-/*D:100 Each lguest device is just a virtio device plus a pointer to its entry
- * in the lguest_devices page. */
+/*D:100
+ * Each lguest device is just a virtio device plus a pointer to its entry
+ * in the lguest_devices page.
+ */
 struct lguest_device {
 	struct virtio_device vdev;
 
@@ -41,9 +47,11 @@ struct lguest_device {
 	struct lguest_device_desc *desc;
 };
 
-/* Since the virtio infrastructure hands us a pointer to the virtio_device all
+/*
+ * Since the virtio infrastructure hands us a pointer to the virtio_device all
  * the time, it helps to have a curt macro to get a pointer to the struct
- * lguest_device it's enclosed in.  */
+ * lguest_device it's enclosed in.
+ */
 #define to_lgdev(vd) container_of(vd, struct lguest_device, vdev)
 
 /*D:130
@@ -55,7 +63,8 @@ struct lguest_device {
  * the driver will look at them during setup.
  *
  * A convenient routine to return the device's virtqueue config array:
- * immediately after the descriptor. */
+ * immediately after the descriptor.
+ */
 static struct lguest_vqconfig *lg_vq(const struct lguest_device_desc *desc)
 {
 	return (void *)(desc + 1);
@@ -98,10 +107,12 @@ static u32 lg_get_features(struct virtio_device *vdev)
 	return features;
 }
 
-/* The virtio core takes the features the Host offers, and copies the
- * ones supported by the driver into the vdev->features array.  Once
- * that's all sorted out, this routine is called so we can tell the
- * Host which features we understand and accept. */
+/*
+ * The virtio core takes the features the Host offers, and copies the ones
+ * supported by the driver into the vdev->features array.  Once that's all
+ * sorted out, this routine is called so we can tell the Host which features we
+ * understand and accept.
+ */
 static void lg_finalize_features(struct virtio_device *vdev)
 {
 	unsigned int i, bits;
@@ -112,10 +123,11 @@ static void lg_finalize_features(struct virtio_device *vdev)
 	/* Give virtio_ring a chance to accept features. */
 	vring_transport_features(vdev);
 
-	/* The vdev->feature array is a Linux bitmask: this isn't the
-	 * same as a the simple array of bits used by lguest devices
-	 * for features.  So we do this slow, manual conversion which is
-	 * completely general. */
+	/*
+	 * The vdev->feature array is a Linux bitmask: this isn't the same as a
+	 * the simple array of bits used by lguest devices for features.  So we
+	 * do this slow, manual conversion which is completely general.
+	 */
 	memset(out_features, 0, desc->feature_len);
 	bits = min_t(unsigned, desc->feature_len, sizeof(vdev->features)) * 8;
 	for (i = 0; i < bits; i++) {
@@ -146,15 +158,19 @@ static void lg_set(struct virtio_device *vdev, unsigned int offset,
 	memcpy(lg_config(desc) + offset, buf, len);
 }
 
-/* The operations to get and set the status word just access the status field
- * of the device descriptor. */
+/*
+ * The operations to get and set the status word just access the status field
+ * of the device descriptor.
+ */
 static u8 lg_get_status(struct virtio_device *vdev)
 {
 	return to_lgdev(vdev)->desc->status;
 }
 
-/* To notify on status updates, we (ab)use the NOTIFY hypercall, with the
- * descriptor address of the device.  A zero status means "reset". */
+/*
+ * To notify on status updates, we (ab)use the NOTIFY hypercall, with the
+ * descriptor address of the device.  A zero status means "reset".
+ */
 static void set_status(struct virtio_device *vdev, u8 status)
 {
 	unsigned long offset = (void *)to_lgdev(vdev)->desc - lguest_devices;
@@ -191,8 +207,7 @@ static void lg_reset(struct virtio_device *vdev)
  */
 
 /*D:140 This is the information we remember about each virtqueue. */
-struct lguest_vq_info
-{
+struct lguest_vq_info {
 	/* A copy of the information contained in the device config. */
 	struct lguest_vqconfig config;
 
@@ -200,13 +215,17 @@ struct lguest_vq_info
 	void *pages;
 };
 
-/* When the virtio_ring code wants to prod the Host, it calls us here and we
+/*
+ * When the virtio_ring code wants to prod the Host, it calls us here and we
  * make a hypercall.  We hand the physical address of the virtqueue so the Host
- * knows which virtqueue we're talking about. */
+ * knows which virtqueue we're talking about.
+ */
 static void lg_notify(struct virtqueue *vq)
 {
-	/* We store our virtqueue information in the "priv" pointer of the
-	 * virtqueue structure. */
+	/*
+	 * We store our virtqueue information in the "priv" pointer of the
+	 * virtqueue structure.
+	 */
 	struct lguest_vq_info *lvq = vq->priv;
 
 	kvm_hypercall1(LHCALL_NOTIFY, lvq->config.pfn << PAGE_SHIFT);
@@ -215,7 +234,8 @@ static void lg_notify(struct virtqueue *vq)
 /* An extern declaration inside a C file is bad form.  Don't do it. */
 extern void lguest_setup_irq(unsigned int irq);
 
-/* This routine finds the first virtqueue described in the configuration of
+/*
+ * This routine finds the Nth virtqueue described in the configuration of
  * this device and sets it up.
  *
  * This is kind of an ugly duckling.  It'd be nicer to have a standard
@@ -223,9 +243,7 @@ extern void lguest_setup_irq(unsigned int irq);
  * everyone wants to do it differently.  The KVM coders want the Guest to
  * allocate its own pages and tell the Host where they are, but for lguest it's
  * simpler for the Host to simply tell us where the pages are.
- *
- * So we provide drivers with a "find the Nth virtqueue and set it up"
- * function. */
+ */
 static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
 				    unsigned index,
 				    void (*callback)(struct virtqueue *vq),
@@ -244,9 +262,11 @@ static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
 	if (!lvq)
 		return ERR_PTR(-ENOMEM);
 
-	/* Make a copy of the "struct lguest_vqconfig" entry, which sits after
+	/*
+	 * Make a copy of the "struct lguest_vqconfig" entry, which sits after
 	 * the descriptor.  We need a copy because the config space might not
-	 * be aligned correctly. */
+	 * be aligned correctly.
+	 */
 	memcpy(&lvq->config, lg_vq(ldev->desc)+index, sizeof(lvq->config));
 
 	printk("Mapping virtqueue %i addr %lx\n", index,
@@ -261,8 +281,10 @@ static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
 		goto free_lvq;
 	}
 
-	/* OK, tell virtio_ring.c to set up a virtqueue now we know its size
-	 * and we've got a pointer to its pages. */
+	/*
+	 * OK, tell virtio_ring.c to set up a virtqueue now we know its size
+	 * and we've got a pointer to its pages.
+	 */
 	vq = vring_new_virtqueue(lvq->config.num, LGUEST_VRING_ALIGN,
 				 vdev, lvq->pages, lg_notify, callback, name);
 	if (!vq) {
@@ -273,18 +295,23 @@ static struct virtqueue *lg_find_vq(struct virtio_device *vdev,
 	/* Make sure the interrupt is allocated. */
 	lguest_setup_irq(lvq->config.irq);
 
-	/* Tell the interrupt for this virtqueue to go to the virtio_ring
-	 * interrupt handler. */
-	/* FIXME: We used to have a flag for the Host to tell us we could use
+	/*
+	 * Tell the interrupt for this virtqueue to go to the virtio_ring
+	 * interrupt handler.
+	 *
+	 * FIXME: We used to have a flag for the Host to tell us we could use
 	 * the interrupt as a source of randomness: it'd be nice to have that
-	 * back.. */
+	 * back.
+	 */
 	err = request_irq(lvq->config.irq, vring_interrupt, IRQF_SHARED,
 			  dev_name(&vdev->dev), vq);
 	if (err)
 		goto destroy_vring;
 
-	/* Last of all we hook up our 'struct lguest_vq_info" to the
-	 * virtqueue's priv pointer. */
+	/*
+	 * Last of all we hook up our 'struct lguest_vq_info" to the
+	 * virtqueue's priv pointer.
+	 */
 	vq->priv = lvq;
 	return vq;
 
@@ -358,11 +385,14 @@ static struct virtio_config_ops lguest_config_ops = {
 	.del_vqs = lg_del_vqs,
 };
 
-/* The root device for the lguest virtio devices.  This makes them appear as
- * /sys/devices/lguest/0,1,2 not /sys/devices/0,1,2. */
+/*
+ * The root device for the lguest virtio devices.  This makes them appear as
+ * /sys/devices/lguest/0,1,2 not /sys/devices/0,1,2.
+ */
 static struct device *lguest_root;
 
-/*D:120 This is the core of the lguest bus: actually adding a new device.
+/*D:120
+ * This is the core of the lguest bus: actually adding a new device.
  * It's a separate function because it's neater that way, and because an
  * earlier version of the code supported hotplug and unplug.  They were removed
  * early on because they were never used.
@@ -371,14 +401,14 @@ static struct device *lguest_root;
  *
  * It's worth reading this carefully: we start with a pointer to the new device
  * descriptor in the "lguest_devices" page, and the offset into the device
- * descriptor page so we can uniquely identify it if things go badly wrong. */
+ * descriptor page so we can uniquely identify it if things go badly wrong.
+ */
 static void add_lguest_device(struct lguest_device_desc *d,
 			      unsigned int offset)
 {
 	struct lguest_device *ldev;
 
-	/* Start with zeroed memory; Linux's device layer seems to count on
-	 * it. */
+	/* Start with zeroed memory; Linux's device layer counts on it. */
 	ldev = kzalloc(sizeof(*ldev), GFP_KERNEL);
 	if (!ldev) {
 		printk(KERN_EMERG "Cannot allocate lguest dev %u type %u\n",
@@ -388,17 +418,25 @@ static void add_lguest_device(struct lguest_device_desc *d,
 
 	/* This devices' parent is the lguest/ dir. */
 	ldev->vdev.dev.parent = lguest_root;
-	/* We have a unique device index thanks to the dev_index counter. */
+	/*
+	 * The device type comes straight from the descriptor.  There's also a
+	 * device vendor field in the virtio_device struct, which we leave as
+	 * 0.
+	 */
 	ldev->vdev.id.device = d->type;
-	/* We have a simple set of routines for querying the device's
-	 * configuration information and setting its status. */
+	/*
+	 * We have a simple set of routines for querying the device's
+	 * configuration information and setting its status.
+	 */
 	ldev->vdev.config = &lguest_config_ops;
 	/* And we remember the device's descriptor for lguest_config_ops. */
 	ldev->desc = d;
 
-	/* register_virtio_device() sets up the generic fields for the struct
+	/*
+	 * register_virtio_device() sets up the generic fields for the struct
 	 * virtio_device and calls device_register().  This makes the bus
-	 * infrastructure look for a matching driver. */
+	 * infrastructure look for a matching driver.
+	 */
 	if (register_virtio_device(&ldev->vdev) != 0) {
 		printk(KERN_ERR "Failed to register lguest dev %u type %u\n",
 		       offset, d->type);
@@ -406,8 +444,10 @@ static void add_lguest_device(struct lguest_device_desc *d,
 	}
 }
 
-/*D:110 scan_devices() simply iterates through the device page.  The type 0 is
- * reserved to mean "end of devices". */
+/*D:110
+ * scan_devices() simply iterates through the device page.  The type 0 is
+ * reserved to mean "end of devices".
+ */
 static void scan_devices(void)
 {
 	unsigned int i;
@@ -426,7 +466,8 @@ static void scan_devices(void)
 	}
 }
 
-/*D:105 Fairly early in boot, lguest_devices_init() is called to set up the
+/*D:105
+ * Fairly early in boot, lguest_devices_init() is called to set up the
  * lguest device infrastructure.  We check that we are a Guest by checking
  * pv_info.name: there are other ways of checking, but this seems most
  * obvious to me.
@@ -437,7 +478,8 @@ static void scan_devices(void)
  * correct sysfs incantation).
  *
  * Finally we call scan_devices() which adds all the devices found in the
- * lguest_devices page. */
+ * lguest_devices page.
+ */
 static int __init lguest_devices_init(void)
 {
 	if (strcmp(pv_info.name, "lguest") != 0)
@@ -456,11 +498,13 @@ static int __init lguest_devices_init(void)
 /* We do this after core stuff, but before the drivers. */
 postcore_initcall(lguest_devices_init);
 
-/*D:150 At this point in the journey we used to now wade through the lguest
+/*D:150
+ * At this point in the journey we used to now wade through the lguest
  * devices themselves: net, block and console.  Since they're all now virtio
  * devices rather than lguest-specific, I've decided to ignore them.  Mostly,
  * they're kind of boring.  But this does mean you'll never experience the
  * thrill of reading the forbidden love scene buried deep in the block driver.
  *
  * "make Launcher" beckons, where we answer questions like "Where do Guests
- * come from?", and "What do you do when someone asks for optimization?". */
+ * come from?", and "What do you do when someone asks for optimization?".
+ */
diff --git a/drivers/lguest/lguest_user.c b/drivers/lguest/lguest_user.c
index 9f9a295..b4d3f7c 100644
--- a/drivers/lguest/lguest_user.c
+++ b/drivers/lguest/lguest_user.c
@@ -1,8 +1,9 @@
 /*P:200 This contains all the /dev/lguest code, whereby the userspace launcher
  * controls and communicates with the Guest.  For example, the first write will
- * tell us the Guest's memory layout, pagetable, entry point and kernel address
- * offset.  A read will run the Guest until something happens, such as a signal
- * or the Guest doing a NOTIFY out to the Launcher. :*/
+ * tell us the Guest's memory layout and entry point.  A read will run the
+ * Guest until something happens, such as a signal or the Guest doing a NOTIFY
+ * out to the Launcher.
+:*/
 #include <linux/uaccess.h>
 #include <linux/miscdevice.h>
 #include <linux/fs.h>
@@ -11,14 +12,41 @@
 #include <linux/file.h>
 #include "lg.h"
 
+/*L:056
+ * Before we move on, let's jump ahead and look at what the kernel does when
+ * it needs to look up the eventfds.  That will complete our picture of how we
+ * use RCU.
+ *
+ * The notification value is in cpu->pending_notify: we return true if it went
+ * to an eventfd.
+ */
 bool send_notify_to_eventfd(struct lg_cpu *cpu)
 {
 	unsigned int i;
 	struct lg_eventfd_map *map;
 
-	/* lg->eventfds is RCU-protected */
+	/*
+	 * This "rcu_read_lock()" helps track when someone is still looking at
+	 * the (RCU-using) eventfds array.  It's not actually a lock at all;
+	 * indeed it's a noop in many configurations.  (You didn't expect me to
+	 * explain all the RCU secrets here, did you?)
+	 */
 	rcu_read_lock();
+	/*
+	 * rcu_dereference is the counter-side of rcu_assign_pointer(); it
+	 * makes sure we don't access the memory pointed to by
+	 * cpu->lg->eventfds before cpu->lg->eventfds is set.  Sounds crazy,
+	 * but Alpha allows this!  Paul McKenney points out that a really
+	 * aggressive compiler could have the same effect:
+	 *   http://lists.ozlabs.org/pipermail/lguest/2009-July/001560.html
+	 *
+	 * So play safe, use rcu_dereference to get the rcu-protected pointer:
+	 */
 	map = rcu_dereference(cpu->lg->eventfds);
+	/*
+	 * Simple array search: even if they add an eventfd while we do this,
+	 * we'll continue to use the old array and just won't see the new one.
+	 */
 	for (i = 0; i < map->num; i++) {
 		if (map->map[i].addr == cpu->pending_notify) {
 			eventfd_signal(map->map[i].event, 1);
@@ -26,19 +54,50 @@ bool send_notify_to_eventfd(struct lg_cpu *cpu)
 			break;
 		}
 	}
+	/* We're done with the rcu-protected variable cpu->lg->eventfds. */
 	rcu_read_unlock();
+
+	/* If we cleared the notification, it's because we found a match. */
 	return cpu->pending_notify == 0;
 }
 
+/*L:055
+ * One of the more tricksy tricks in the Linux Kernel is a technique called
+ * Read Copy Update.  Since one point of lguest is to teach lguest journeyers
+ * about kernel coding, I use it here.  (In case you're curious, other purposes
+ * include learning about virtualization and instilling a deep appreciation for
+ * simplicity and puppies).
+ *
+ * We keep a simple array which maps LHCALL_NOTIFY values to eventfds, but we
+ * add new eventfds without ever blocking readers from accessing the array.
+ * The current Launcher only does this during boot, so that never happens.  But
+ * Read Copy Update is cool, and adding a lock risks damaging even more puppies
+ * than this code does.
+ *
+ * We allocate a brand new one-larger array, copy the old one and add our new
+ * element.  Then we make the lg eventfd pointer point to the new array.
+ * That's the easy part: now we need to free the old one, but we need to make
+ * sure no slow CPU somewhere is still looking at it.  That's what
+ * synchronize_rcu does for us: waits until every CPU has indicated that it has
+ * moved on to know it's no longer using the old one.
+ *
+ * If that's unclear, see http://en.wikipedia.org/wiki/Read-copy-update.
+ */
 static int add_eventfd(struct lguest *lg, unsigned long addr, int fd)
 {
 	struct lg_eventfd_map *new, *old = lg->eventfds;
 
+	/*
+	 * We don't allow notifications on value 0 anyway (pending_notify of
+	 * 0 means "nothing pending").
+	 */
 	if (!addr)
 		return -EINVAL;
 
-	/* Replace the old array with the new one, carefully: others can
-	 * be accessing it at the same time */
+	/*
+	 * Replace the old array with the new one, carefully: others can
+	 * be accessing it at the same time.
+	 */
 	new = kmalloc(sizeof(*new) + sizeof(new->map[0]) * (old->num + 1),
 		      GFP_KERNEL);
 	if (!new)
@@ -52,22 +111,41 @@ static int add_eventfd(struct lguest *lg, unsigned long addr, int fd)
 	new->map[new->num].addr = addr;
 	new->map[new->num].event = eventfd_ctx_fdget(fd);
 	if (IS_ERR(new->map[new->num].event)) {
+		int err =  PTR_ERR(new->map[new->num].event);
 		kfree(new);
-		return PTR_ERR(new->map[new->num].event);
+		return err;
 	}
 	new->num++;
 
-	/* Now put new one in place. */
+	/*
+	 * Now put new one in place: rcu_assign_pointer() is a fancy way of
+	 * doing "lg->eventfds = new", but it uses memory barriers to make
+	 * absolutely sure that the contents of "new" written above is nailed
+	 * down before we actually do the assignment.
+	 *
+	 * We have to think about these kinds of things when we're operating on
+	 * live data without locks.
+	 */
 	rcu_assign_pointer(lg->eventfds, new);
 
-	/* We're not in a big hurry.  Wait until noone's looking at old
-	 * version, then delete it. */
+	/*
+	 * We're not in a big hurry.  Wait until noone's looking at old
+	 * version, then free it.
+	 */
 	synchronize_rcu();
 	kfree(old);
 
 	return 0;
 }
 
+/*L:052
+ * Receiving notifications from the Guest is usually done by attaching a
+ * particular LHCALL_NOTIFY value to an event filedescriptor.  The eventfd will
+ * become readable when the Guest does an LHCALL_NOTIFY with that value.
+ *
+ * This is really convenient for processing each virtqueue in a separate
+ * thread.
+ */
 static int attach_eventfd(struct lguest *lg, const unsigned long __user *input)
 {
 	unsigned long addr, fd;
@@ -79,15 +157,22 @@ static int attach_eventfd(struct lguest *lg, const unsigned long __user *input)
 	if (get_user(fd, input) != 0)
 		return -EFAULT;
 
+	/*
+	 * Just make sure two callers don't add eventfds at once.  We really
+	 * only need to lock against callers adding to the same Guest, so using
+	 * the Big Lguest Lock is overkill.  But this is setup, not a fast path.
+	 */
 	mutex_lock(&lguest_lock);
 	err = add_eventfd(lg, addr, fd);
 	mutex_unlock(&lguest_lock);
 
-	return 0;
+	return err;
 }
 
-/*L:050 Sending an interrupt is done by writing LHREQ_IRQ and an interrupt
- * number to /dev/lguest. */
+/*L:050
+ * Sending an interrupt is done by writing LHREQ_IRQ and an interrupt
+ * number to /dev/lguest.
+ */
 static int user_send_irq(struct lg_cpu *cpu, const unsigned long __user *input)
 {
 	unsigned long irq;
@@ -97,12 +182,18 @@ static int user_send_irq(struct lg_cpu *cpu, const unsigned long __user *input)
 	if (irq >= LGUEST_IRQS)
 		return -EINVAL;
 
+	/*
+	 * Next time the Guest runs, the core code will see if it can deliver
+	 * this interrupt.
+	 */
 	set_interrupt(cpu, irq);
 	return 0;
 }
 
-/*L:040 Once our Guest is initialized, the Launcher makes it run by reading
- * from /dev/lguest. */
+/*L:040
+ * Once our Guest is initialized, the Launcher makes it run by reading
+ * from /dev/lguest.
+ */
 static ssize_t read(struct file *file, char __user *user, size_t size,loff_t*o)
 {
 	struct lguest *lg = file->private_data;
@@ -138,8 +229,10 @@ static ssize_t read(struct file *file, char __user *user, size_t size,loff_t*o)
 		return len;
 	}
 
-	/* If we returned from read() last time because the Guest sent I/O,
-	 * clear the flag. */
+	/*
+	 * If we returned from read() last time because the Guest sent I/O,
+	 * clear the flag.
+	 */
 	if (cpu->pending_notify)
 		cpu->pending_notify = 0;
 
@@ -147,8 +240,10 @@ static ssize_t read(struct file *file, char __user *user, size_t size,loff_t*o)
 	return run_guest(cpu, (unsigned long __user *)user);
 }
 
-/*L:025 This actually initializes a CPU.  For the moment, a Guest is only
- * uniprocessor, so "id" is always 0. */
+/*L:025
+ * This actually initializes a CPU.  For the moment, a Guest is only
+ * uniprocessor, so "id" is always 0.
+ */
 static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
 {
 	/* We have a limited number the number of CPUs in the lguest struct. */
@@ -163,8 +258,10 @@ static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
 	/* Each CPU has a timer it can set. */
 	init_clockdev(cpu);
 
-	/* We need a complete page for the Guest registers: they are accessible
-	 * to the Guest and we can only grant it access to whole pages. */
+	/*
+	 * We need a complete page for the Guest registers: they are accessible
+	 * to the Guest and we can only grant it access to whole pages.
+	 */
 	cpu->regs_page = get_zeroed_page(GFP_KERNEL);
 	if (!cpu->regs_page)
 		return -ENOMEM;
@@ -172,29 +269,38 @@ static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
 	/* We actually put the registers at the bottom of the page. */
 	cpu->regs = (void *)cpu->regs_page + PAGE_SIZE - sizeof(*cpu->regs);
 
-	/* Now we initialize the Guest's registers, handing it the start
-	 * address. */
+	/*
+	 * Now we initialize the Guest's registers, handing it the start
+	 * address.
+	 */
 	lguest_arch_setup_regs(cpu, start_ip);
 
-	/* We keep a pointer to the Launcher task (ie. current task) for when
-	 * other Guests want to wake this one (eg. console input). */
+	/*
+	 * We keep a pointer to the Launcher task (ie. current task) for when
+	 * other Guests want to wake this one (eg. console input).
+	 */
 	cpu->tsk = current;
 
-	/* We need to keep a pointer to the Launcher's memory map, because if
+	/*
+	 * We need to keep a pointer to the Launcher's memory map, because if
 	 * the Launcher dies we need to clean it up.  If we don't keep a
-	 * reference, it is destroyed before close() is called. */
+	 * reference, it is destroyed before close() is called.
+	 */
 	cpu->mm = get_task_mm(cpu->tsk);
 
-	/* We remember which CPU's pages this Guest used last, for optimization
-	 * when the same Guest runs on the same CPU twice. */
+	/*
+	 * We remember which CPU's pages this Guest used last, for optimization
+	 * when the same Guest runs on the same CPU twice.
+	 */
 	cpu->last_pages = NULL;
 
 	/* No error == success. */
 	return 0;
 }
 
-/*L:020 The initialization write supplies 3 pointer sized (32 or 64 bit)
- * values (in addition to the LHREQ_INITIALIZE value).  These are:
+/*L:020
+ * The initialization write supplies 3 pointer sized (32 or 64 bit) values (in
+ * addition to the LHREQ_INITIALIZE value).  These are:
  *
  * base: The start of the Guest-physical memory inside the Launcher memory.
  *
@@ -206,14 +312,15 @@ static int lg_cpu_start(struct lg_cpu *cpu, unsigned id, unsigned long start_ip)
  */
 static int initialize(struct file *file, const unsigned long __user *input)
 {
-	/* "struct lguest" contains everything we (the Host) know about a
-	 * Guest. */
+	/* "struct lguest" contains all we (the Host) know about a Guest. */
 	struct lguest *lg;
 	int err;
 	unsigned long args[3];
 
-	/* We grab the Big Lguest lock, which protects against multiple
-	 * simultaneous initializations. */
+	/*
+	 * We grab the Big Lguest lock, which protects against multiple
+	 * simultaneous initializations.
+	 */
 	mutex_lock(&lguest_lock);
 	/* You can't initialize twice!  Close the device and start again... */
 	if (file->private_data) {
@@ -248,8 +355,10 @@ static int initialize(struct file *file, const unsigned long __user *input)
 	if (err)
 		goto free_eventfds;
 
-	/* Initialize the Guest's shadow page tables, using the toplevel
-	 * address the Launcher gave us.  This allocates memory, so can fail. */
+	/*
+	 * Initialize the Guest's shadow page tables, using the toplevel
+	 * address the Launcher gave us.  This allocates memory, so can fail.
+	 */
 	err = init_guest_pagetable(lg);
 	if (err)
 		goto free_regs;
@@ -274,20 +383,24 @@ unlock:
 	return err;
 }
 
-/*L:010 The first operation the Launcher does must be a write.  All writes
+/*L:010
+ * The first operation the Launcher does must be a write.  All writes
  * start with an unsigned long number: for the first write this must be
  * LHREQ_INITIALIZE to set up the Guest.  After that the Launcher can use
- * writes of other values to send interrupts.
+ * writes of other values to send interrupts or set up receipt of notifications.
  *
  * Note that we overload the "offset" in the /dev/lguest file to indicate what
- * CPU number we're dealing with.  Currently this is always 0, since we only
+ * CPU number we're dealing with.  Currently this is always 0 since we only
  * support uniprocessor Guests, but you can see the beginnings of SMP support
- * here. */
+ * here.
+ */
 static ssize_t write(struct file *file, const char __user *in,
 		     size_t size, loff_t *off)
 {
-	/* Once the Guest is initialized, we hold the "struct lguest" in the
-	 * file private data. */
+	/*
+	 * Once the Guest is initialized, we hold the "struct lguest" in the
+	 * file private data.
+	 */
 	struct lguest *lg = file->private_data;
 	const unsigned long __user *input = (const unsigned long __user *)in;
 	unsigned long req;
@@ -322,13 +435,15 @@ static ssize_t write(struct file *file, const char __user *in,
 	}
 }
 
-/*L:060 The final piece of interface code is the close() routine.  It reverses
+/*L:060
+ * The final piece of interface code is the close() routine.  It reverses
  * everything done in initialize().  This is usually called because the
  * Launcher exited.
  *
  * Note that the close routine returns 0 or a negative error number: it can't
  * really fail, but it can whine.  I blame Sun for this wart, and K&R C for
- * letting them do it. :*/
+ * letting them do it.
+:*/
 static int close(struct inode *inode, struct file *file)
 {
 	struct lguest *lg = file->private_data;
@@ -338,8 +453,10 @@ static int close(struct inode *inode, struct file *file)
 	if (!lg)
 		return 0;
 
-	/* We need the big lock, to protect from inter-guest I/O and other
-	 * Launchers initializing guests. */
+	/*
+	 * We need the big lock, to protect from inter-guest I/O and other
+	 * Launchers initializing guests.
+	 */
 	mutex_lock(&lguest_lock);
 
 	/* Free up the shadow page tables for the Guest. */
@@ -350,8 +467,10 @@ static int close(struct inode *inode, struct file *file)
 		hrtimer_cancel(&lg->cpus[i].hrt);
 		/* We can free up the register page we allocated. */
 		free_page(lg->cpus[i].regs_page);
-		/* Now all the memory cleanups are done, it's safe to release
-		 * the Launcher's memory management structure. */
+		/*
+		 * Now all the memory cleanups are done, it's safe to release
+		 * the Launcher's memory management structure.
+		 */
 		mmput(lg->cpus[i].mm);
 	}
 
@@ -360,8 +479,10 @@ static int close(struct inode *inode, struct file *file)
 		eventfd_ctx_put(lg->eventfds->map[i].event);
 	kfree(lg->eventfds);
 
-	/* If lg->dead doesn't contain an error code it will be NULL or a
-	 * kmalloc()ed string, either of which is ok to hand to kfree(). */
+	/*
+	 * If lg->dead doesn't contain an error code it will be NULL or a
+	 * kmalloc()ed string, either of which is ok to hand to kfree().
+	 */
 	if (!IS_ERR(lg->dead))
 		kfree(lg->dead);
 	/* Free the memory allocated to the lguest_struct */
@@ -385,7 +506,8 @@ static int close(struct inode *inode, struct file *file)
  *
  * We begin our understanding with the Host kernel interface which the Launcher
  * uses: reading and writing a character device called /dev/lguest.  All the
- * work happens in the read(), write() and close() routines: */
+ * work happens in the read(), write() and close() routines:
+ */
 static struct file_operations lguest_fops = {
 	.owner	 = THIS_MODULE,
 	.release = close,
@@ -393,8 +515,10 @@ static struct file_operations lguest_fops = {
 	.read	 = read,
 };
 
-/* This is a textbook example of a "misc" character device.  Populate a "struct
- * miscdevice" and register it with misc_register(). */
+/*
+ * This is a textbook example of a "misc" character device.  Populate a "struct
+ * miscdevice" and register it with misc_register().
+ */
 static struct miscdevice lguest_dev = {
 	.minor	= MISC_DYNAMIC_MINOR,
 	.name	= "lguest",
diff --git a/drivers/lguest/page_tables.c b/drivers/lguest/page_tables.c
index a6fe1ab..a8d0aee 100644
--- a/drivers/lguest/page_tables.c
+++ b/drivers/lguest/page_tables.c
@@ -1,9 +1,11 @@
-/*P:700 The pagetable code, on the other hand, still shows the scars of
+/*P:700
+ * The pagetable code, on the other hand, still shows the scars of
  * previous encounters.  It's functional, and as neat as it can be in the
  * circumstances, but be wary, for these things are subtle and break easily.
  * The Guest provides a virtual to physical mapping, but we can neither trust
  * it nor use it: we verify and convert it here then point the CPU to the
- * converted Guest pages when running the Guest. :*/
+ * converted Guest pages when running the Guest.
+:*/
 
 /* Copyright (C) Rusty Russell IBM Corporation 2006.
  * GPL v2 and any later version */
@@ -17,18 +19,20 @@
 #include <asm/bootparam.h>
 #include "lg.h"
 
-/*M:008 We hold reference to pages, which prevents them from being swapped.
+/*M:008
+ * We hold reference to pages, which prevents them from being swapped.
  * It'd be nice to have a callback in the "struct mm_struct" when Linux wants
  * to swap out.  If we had this, and a shrinker callback to trim PTE pages, we
- * could probably consider launching Guests as non-root. :*/
+ * could probably consider launching Guests as non-root.
+:*/
 
 /*H:300
  * The Page Table Code
  *
- * We use two-level page tables for the Guest.  If you're not entirely
- * comfortable with virtual addresses, physical addresses and page tables then
- * I recommend you review arch/x86/lguest/boot.c's "Page Table Handling" (with
- * diagrams!).
+ * We use two-level page tables for the Guest, or three-level with PAE.  If
+ * you're not entirely comfortable with virtual addresses, physical addresses
+ * and page tables then I recommend you review arch/x86/lguest/boot.c's "Page
+ * Table Handling" (with diagrams!).
  *
  * The Guest keeps page tables, but we maintain the actual ones here: these are
  * called "shadow" page tables.  Which is a very Guest-centric name: these are
@@ -45,16 +49,18 @@
  *  (v) Flushing (throwing away) page tables,
  *  (vi) Mapping the Switcher when the Guest is about to run,
  *  (vii) Setting up the page tables initially.
- :*/
+:*/
 
-
-/* 1024 entries in a page table page maps 1024 pages: 4MB.  The Switcher is
- * conveniently placed at the top 4MB, so it uses a separate, complete PTE
- * page.  */
+/*
+ * The Switcher uses the complete top PTE page.  That's 1024 PTE entries (4MB)
+ * or 512 PTE entries with PAE (2MB).
+ */
 #define SWITCHER_PGD_INDEX (PTRS_PER_PGD - 1)
 
-/* For PAE we need the PMD index as well. We use the last 2MB, so we
- * will need the last pmd entry of the last pmd page.  */
+/*
+ * For PAE we need the PMD index as well. We use the last 2MB, so we
+ * will need the last pmd entry of the last pmd page.
+ */
 #ifdef CONFIG_X86_PAE
 #define SWITCHER_PMD_INDEX 	(PTRS_PER_PMD - 1)
 #define RESERVE_MEM 		2U
@@ -64,14 +70,18 @@
 #define CHECK_GPGD_MASK		_PAGE_TABLE
 #endif
 
-/* We actually need a separate PTE page for each CPU.  Remember that after the
+/*
+ * We actually need a separate PTE page for each CPU.  Remember that after the
  * Switcher code itself comes two pages for each CPU, and we don't want this
- * CPU's guest to see the pages of any other CPU. */
+ * CPU's guest to see the pages of any other CPU.
+ */
 static DEFINE_PER_CPU(pte_t *, switcher_pte_pages);
 #define switcher_pte_page(cpu) per_cpu(switcher_pte_pages, cpu)
 
-/*H:320 The page table code is curly enough to need helper functions to keep it
- * clear and clean.
+/*H:320
+ * The page table code is curly enough to need helper functions to keep it
+ * clear and clean.  The kernel itself provides many of them; one advantage
+ * of insisting that the Guest and Host use the same CONFIG_PAE setting.
  *
  * There are two functions which return pointers to the shadow (aka "real")
  * page tables.
@@ -79,7 +89,8 @@ static DEFINE_PER_CPU(pte_t *, switcher_pte_pages);
  * spgd_addr() takes the virtual address and returns a pointer to the top-level
  * page directory entry (PGD) for that address.  Since we keep track of several
  * page tables, the "i" argument tells us which one we're interested in (it's
- * usually the current one). */
+ * usually the current one).
+ */
 static pgd_t *spgd_addr(struct lg_cpu *cpu, u32 i, unsigned long vaddr)
 {
 	unsigned int index = pgd_index(vaddr);
@@ -96,9 +107,11 @@ static pgd_t *spgd_addr(struct lg_cpu *cpu, u32 i, unsigned long vaddr)
 }
 
 #ifdef CONFIG_X86_PAE
-/* This routine then takes the PGD entry given above, which contains the
+/*
+ * This routine then takes the PGD entry given above, which contains the
  * address of the PMD page.  It then returns a pointer to the PMD entry for the
- * given address. */
+ * given address.
+ */
 static pmd_t *spmd_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
 {
 	unsigned int index = pmd_index(vaddr);
@@ -119,9 +132,11 @@ static pmd_t *spmd_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
 }
 #endif
 
-/* This routine then takes the page directory entry returned above, which
+/*
+ * This routine then takes the page directory entry returned above, which
  * contains the address of the page table entry (PTE) page.  It then returns a
- * pointer to the PTE entry for the given address. */
+ * pointer to the PTE entry for the given address.
+ */
 static pte_t *spte_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
 {
 #ifdef CONFIG_X86_PAE
@@ -139,8 +154,10 @@ static pte_t *spte_addr(struct lg_cpu *cpu, pgd_t spgd, unsigned long vaddr)
 	return &page[pte_index(vaddr)];
 }
 
-/* These two functions just like the above two, except they access the Guest
- * page tables.  Hence they return a Guest address. */
+/*
+ * These functions are just like the above two, except they access the Guest
+ * page tables.  Hence they return a Guest address.
+ */
 static unsigned long gpgd_addr(struct lg_cpu *cpu, unsigned long vaddr)
 {
 	unsigned int index = vaddr >> (PGDIR_SHIFT);
@@ -148,6 +165,7 @@ static unsigned long gpgd_addr(struct lg_cpu *cpu, unsigned long vaddr)
 }
 
 #ifdef CONFIG_X86_PAE
+/* Follow the PGD to the PMD. */
 static unsigned long gpmd_addr(pgd_t gpgd, unsigned long vaddr)
 {
 	unsigned long gpage = pgd_pfn(gpgd) << PAGE_SHIFT;
@@ -155,6 +173,7 @@ static unsigned long gpmd_addr(pgd_t gpgd, unsigned long vaddr)
 	return gpage + pmd_index(vaddr) * sizeof(pmd_t);
 }
 
+/* Follow the PMD to the PTE. */
 static unsigned long gpte_addr(struct lg_cpu *cpu,
 			       pmd_t gpmd, unsigned long vaddr)
 {
@@ -164,6 +183,7 @@ static unsigned long gpte_addr(struct lg_cpu *cpu,
 	return gpage + pte_index(vaddr) * sizeof(pte_t);
 }
 #else
+/* Follow the PGD to the PTE (no mid-level for !PAE). */
 static unsigned long gpte_addr(struct lg_cpu *cpu,
 				pgd_t gpgd, unsigned long vaddr)
 {
@@ -175,17 +195,21 @@ static unsigned long gpte_addr(struct lg_cpu *cpu,
 #endif
 /*:*/
 
-/*M:014 get_pfn is slow: we could probably try to grab batches of pages here as
- * an optimization (ie. pre-faulting). :*/
+/*M:014
+ * get_pfn is slow: we could probably try to grab batches of pages here as
+ * an optimization (ie. pre-faulting).
+:*/
 
-/*H:350 This routine takes a page number given by the Guest and converts it to
+/*H:350
+ * This routine takes a page number given by the Guest and converts it to
  * an actual, physical page number.  It can fail for several reasons: the
  * virtual address might not be mapped by the Launcher, the write flag is set
  * and the page is read-only, or the write flag was set and the page was
  * shared so had to be copied, but we ran out of memory.
  *
  * This holds a reference to the page, so release_pte() is careful to put that
- * back. */
+ * back.
+ */
 static unsigned long get_pfn(unsigned long virtpfn, int write)
 {
 	struct page *page;
@@ -198,33 +222,41 @@ static unsigned long get_pfn(unsigned long virtpfn, int write)
 	return -1UL;
 }
 
-/*H:340 Converting a Guest page table entry to a shadow (ie. real) page table
+/*H:340
+ * Converting a Guest page table entry to a shadow (ie. real) page table
  * entry can be a little tricky.  The flags are (almost) the same, but the
  * Guest PTE contains a virtual page number: the CPU needs the real page
- * number. */
+ * number.
+ */
 static pte_t gpte_to_spte(struct lg_cpu *cpu, pte_t gpte, int write)
 {
 	unsigned long pfn, base, flags;
 
-	/* The Guest sets the global flag, because it thinks that it is using
+	/*
+	 * The Guest sets the global flag, because it thinks that it is using
 	 * PGE.  We only told it to use PGE so it would tell us whether it was
 	 * flushing a kernel mapping or a userspace mapping.  We don't actually
-	 * use the global bit, so throw it away. */
+	 * use the global bit, so throw it away.
+	 */
 	flags = (pte_flags(gpte) & ~_PAGE_GLOBAL);
 
 	/* The Guest's pages are offset inside the Launcher. */
 	base = (unsigned long)cpu->lg->mem_base / PAGE_SIZE;
 
-	/* We need a temporary "unsigned long" variable to hold the answer from
+	/*
+	 * We need a temporary "unsigned long" variable to hold the answer from
 	 * get_pfn(), because it returns 0xFFFFFFFF on failure, which wouldn't
 	 * fit in spte.pfn.  get_pfn() finds the real physical number of the
-	 * page, given the virtual number. */
+	 * page, given the virtual number.
+	 */
 	pfn = get_pfn(base + pte_pfn(gpte), write);
 	if (pfn == -1UL) {
 		kill_guest(cpu, "failed to get page %lu", pte_pfn(gpte));
-		/* When we destroy the Guest, we'll go through the shadow page
+		/*
+		 * When we destroy the Guest, we'll go through the shadow page
 		 * tables and release_pte() them.  Make sure we don't think
-		 * this one is valid! */
+		 * this one is valid!
+		 */
 		flags = 0;
 	}
 	/* Now we assemble our shadow PTE from the page number and flags. */
@@ -234,8 +266,10 @@ static pte_t gpte_to_spte(struct lg_cpu *cpu, pte_t gpte, int write)
 /*H:460 And to complete the chain, release_pte() looks like this: */
 static void release_pte(pte_t pte)
 {
-	/* Remember that get_user_pages_fast() took a reference to the page, in
-	 * get_pfn()?  We have to put it back now. */
+	/*
+	 * Remember that get_user_pages_fast() took a reference to the page, in
+	 * get_pfn()?  We have to put it back now.
+	 */
 	if (pte_flags(pte) & _PAGE_PRESENT)
 		put_page(pte_page(pte));
 }
@@ -273,7 +307,8 @@ static void check_gpmd(struct lg_cpu *cpu, pmd_t gpmd)
  * and return to the Guest without it knowing.
  *
  * If we fixed up the fault (ie. we mapped the address), this routine returns
- * true.  Otherwise, it was a real fault and we need to tell the Guest. */
+ * true.  Otherwise, it was a real fault and we need to tell the Guest.
+ */
 bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
 {
 	pgd_t gpgd;
@@ -282,6 +317,7 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
 	pte_t gpte;
 	pte_t *spte;
 
+	/* Mid level for PAE. */
 #ifdef CONFIG_X86_PAE
 	pmd_t *spmd;
 	pmd_t gpmd;
@@ -298,22 +334,26 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
 	if (!(pgd_flags(*spgd) & _PAGE_PRESENT)) {
 		/* No shadow entry: allocate a new shadow PTE page. */
 		unsigned long ptepage = get_zeroed_page(GFP_KERNEL);
-		/* This is not really the Guest's fault, but killing it is
-		 * simple for this corner case. */
+		/*
+		 * This is not really the Guest's fault, but killing it is
+		 * simple for this corner case.
+		 */
 		if (!ptepage) {
 			kill_guest(cpu, "out of memory allocating pte page");
 			return false;
 		}
 		/* We check that the Guest pgd is OK. */
 		check_gpgd(cpu, gpgd);
-		/* And we copy the flags to the shadow PGD entry.  The page
-		 * number in the shadow PGD is the page we just allocated. */
+		/*
+		 * And we copy the flags to the shadow PGD entry.  The page
+		 * number in the shadow PGD is the page we just allocated.
+		 */
 		set_pgd(spgd, __pgd(__pa(ptepage) | pgd_flags(gpgd)));
 	}
 
 #ifdef CONFIG_X86_PAE
 	gpmd = lgread(cpu, gpmd_addr(gpgd, vaddr), pmd_t);
-	/* middle level not present?  We can't map it in. */
+	/* Middle level not present?  We can't map it in. */
 	if (!(pmd_flags(gpmd) & _PAGE_PRESENT))
 		return false;
 
@@ -324,8 +364,10 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
 		/* No shadow entry: allocate a new shadow PTE page. */
 		unsigned long ptepage = get_zeroed_page(GFP_KERNEL);
 
-		/* This is not really the Guest's fault, but killing it is
-		* simple for this corner case. */
+		/*
+		 * This is not really the Guest's fault, but killing it is
+		 * simple for this corner case.
+		 */
 		if (!ptepage) {
 			kill_guest(cpu, "out of memory allocating pte page");
 			return false;
@@ -334,27 +376,37 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
 		/* We check that the Guest pmd is OK. */
 		check_gpmd(cpu, gpmd);
 
-		/* And we copy the flags to the shadow PMD entry.  The page
-		 * number in the shadow PMD is the page we just allocated. */
+		/*
+		 * And we copy the flags to the shadow PMD entry.  The page
+		 * number in the shadow PMD is the page we just allocated.
+		 */
 		native_set_pmd(spmd, __pmd(__pa(ptepage) | pmd_flags(gpmd)));
 	}
 
-	/* OK, now we look at the lower level in the Guest page table: keep its
-	 * address, because we might update it later. */
+	/*
+	 * OK, now we look at the lower level in the Guest page table: keep its
+	 * address, because we might update it later.
+	 */
 	gpte_ptr = gpte_addr(cpu, gpmd, vaddr);
 #else
-	/* OK, now we look at the lower level in the Guest page table: keep its
-	 * address, because we might update it later. */
+	/*
+	 * OK, now we look at the lower level in the Guest page table: keep its
+	 * address, because we might update it later.
+	 */
 	gpte_ptr = gpte_addr(cpu, gpgd, vaddr);
 #endif
+
+	/* Read the actual PTE value. */
 	gpte = lgread(cpu, gpte_ptr, pte_t);
 
 	/* If this page isn't in the Guest page tables, we can't page it in. */
 	if (!(pte_flags(gpte) & _PAGE_PRESENT))
 		return false;
 
-	/* Check they're not trying to write to a page the Guest wants
-	 * read-only (bit 2 of errcode == write). */
+	/*
+	 * Check they're not trying to write to a page the Guest wants
+	 * read-only (bit 2 of errcode == write).
+	 */
 	if ((errcode & 2) && !(pte_flags(gpte) & _PAGE_RW))
 		return false;
 
@@ -362,8 +414,10 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
 	if ((errcode & 4) && !(pte_flags(gpte) & _PAGE_USER))
 		return false;
 
-	/* Check that the Guest PTE flags are OK, and the page number is below
-	 * the pfn_limit (ie. not mapping the Launcher binary). */
+	/*
+	 * Check that the Guest PTE flags are OK, and the page number is below
+	 * the pfn_limit (ie. not mapping the Launcher binary).
+	 */
 	check_gpte(cpu, gpte);
 
 	/* Add the _PAGE_ACCESSED and (for a write) _PAGE_DIRTY flag */
@@ -373,29 +427,40 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
 
 	/* Get the pointer to the shadow PTE entry we're going to set. */
 	spte = spte_addr(cpu, *spgd, vaddr);
-	/* If there was a valid shadow PTE entry here before, we release it.
-	 * This can happen with a write to a previously read-only entry. */
+
+	/*
+	 * If there was a valid shadow PTE entry here before, we release it.
+	 * This can happen with a write to a previously read-only entry.
+	 */
 	release_pte(*spte);
 
-	/* If this is a write, we insist that the Guest page is writable (the
-	 * final arg to gpte_to_spte()). */
+	/*
+	 * If this is a write, we insist that the Guest page is writable (the
+	 * final arg to gpte_to_spte()).
+	 */
 	if (pte_dirty(gpte))
 		*spte = gpte_to_spte(cpu, gpte, 1);
 	else
-		/* If this is a read, don't set the "writable" bit in the page
+		/*
+		 * If this is a read, don't set the "writable" bit in the page
 		 * table entry, even if the Guest says it's writable.  That way
 		 * we will come back here when a write does actually occur, so
-		 * we can update the Guest's _PAGE_DIRTY flag. */
+		 * we can update the Guest's _PAGE_DIRTY flag.
+		 */
 		native_set_pte(spte, gpte_to_spte(cpu, pte_wrprotect(gpte), 0));
 
-	/* Finally, we write the Guest PTE entry back: we've set the
-	 * _PAGE_ACCESSED and maybe the _PAGE_DIRTY flags. */
+	/*
+	 * Finally, we write the Guest PTE entry back: we've set the
+	 * _PAGE_ACCESSED and maybe the _PAGE_DIRTY flags.
+	 */
 	lgwrite(cpu, gpte_ptr, pte_t, gpte);
 
-	/* The fault is fixed, the page table is populated, the mapping
+	/*
+	 * The fault is fixed, the page table is populated, the mapping
 	 * manipulated, the result returned and the code complete.  A small
 	 * delay and a trace of alliteration are the only indications the Guest
-	 * has that a page fault occurred at all. */
+	 * has that a page fault occurred at all.
+	 */
 	return true;
 }
 
@@ -408,7 +473,8 @@ bool demand_page(struct lg_cpu *cpu, unsigned long vaddr, int errcode)
  * mapped, so it's overkill.
  *
  * This is a quick version which answers the question: is this virtual address
- * mapped by the shadow page tables, and is it writable? */
+ * mapped by the shadow page tables, and is it writable?
+ */
 static bool page_writable(struct lg_cpu *cpu, unsigned long vaddr)
 {
 	pgd_t *spgd;
@@ -428,21 +494,26 @@ static bool page_writable(struct lg_cpu *cpu, unsigned long vaddr)
 		return false;
 #endif
 
-	/* Check the flags on the pte entry itself: it must be present and
-	 * writable. */
+	/*
+	 * Check the flags on the pte entry itself: it must be present and
+	 * writable.
+	 */
 	flags = pte_flags(*(spte_addr(cpu, *spgd, vaddr)));
 
 	return (flags & (_PAGE_PRESENT|_PAGE_RW)) == (_PAGE_PRESENT|_PAGE_RW);
 }
 
-/* So, when pin_stack_pages() asks us to pin a page, we check if it's already
+/*
+ * So, when pin_stack_pages() asks us to pin a page, we check if it's already
  * in the page tables, and if not, we call demand_page() with error code 2
- * (meaning "write"). */
+ * (meaning "write").
+ */
 void pin_page(struct lg_cpu *cpu, unsigned long vaddr)
 {
 	if (!page_writable(cpu, vaddr) && !demand_page(cpu, vaddr, 2))
 		kill_guest(cpu, "bad stack page %#lx", vaddr);
 }
+/*:*/
 
 #ifdef CONFIG_X86_PAE
 static void release_pmd(pmd_t *spmd)
@@ -479,15 +550,21 @@ static void release_pgd(pgd_t *spgd)
 }
 
 #else /* !CONFIG_X86_PAE */
-/*H:450 If we chase down the release_pgd() code, it looks like this: */
+/*H:450
+ * If we chase down the release_pgd() code, the non-PAE version looks like
+ * this.  The PAE version is almost identical, but instead of calling
+ * release_pte it calls release_pmd(), which looks much like this.
+ */
 static void release_pgd(pgd_t *spgd)
 {
 	/* If the entry's not present, there's nothing to release. */
 	if (pgd_flags(*spgd) & _PAGE_PRESENT) {
 		unsigned int i;
-		/* Converting the pfn to find the actual PTE page is easy: turn
+		/*
+		 * Converting the pfn to find the actual PTE page is easy: turn
 		 * the page number into a physical address, then convert to a
-		 * virtual address (easy for kernel pages like this one). */
+		 * virtual address (easy for kernel pages like this one).
+		 */
 		pte_t *ptepage = __va(pgd_pfn(*spgd) << PAGE_SHIFT);
 		/* For each entry in the page, we might need to release it. */
 		for (i = 0; i < PTRS_PER_PTE; i++)
@@ -499,9 +576,12 @@ static void release_pgd(pgd_t *spgd)
 	}
 }
 #endif
-/*H:445 We saw flush_user_mappings() twice: once from the flush_user_mappings()
+
+/*H:445
+ * We saw flush_user_mappings() twice: once from the flush_user_mappings()
  * hypercall and once in new_pgdir() when we re-used a top-level pgdir page.
- * It simply releases every PTE page from 0 up to the Guest's kernel address. */
+ * It simply releases every PTE page from 0 up to the Guest's kernel address.
+ */
 static void flush_user_mappings(struct lguest *lg, int idx)
 {
 	unsigned int i;
@@ -510,10 +590,12 @@ static void flush_user_mappings(struct lguest *lg, int idx)
 		release_pgd(lg->pgdirs[idx].pgdir + i);
 }
 
-/*H:440 (v) Flushing (throwing away) page tables,
+/*H:440
+ * (v) Flushing (throwing away) page tables,
  *
  * The Guest has a hypercall to throw away the page tables: it's used when a
- * large number of mappings have been changed. */
+ * large number of mappings have been changed.
+ */
 void guest_pagetable_flush_user(struct lg_cpu *cpu)
 {
 	/* Drop the userspace part of the current page table. */
@@ -551,9 +633,11 @@ unsigned long guest_pa(struct lg_cpu *cpu, unsigned long vaddr)
 	return pte_pfn(gpte) * PAGE_SIZE | (vaddr & ~PAGE_MASK);
 }
 
-/* We keep several page tables.  This is a simple routine to find the page
+/*
+ * We keep several page tables.  This is a simple routine to find the page
  * table (if any) corresponding to this top-level address the Guest has given
- * us. */
+ * us.
+ */
 static unsigned int find_pgdir(struct lguest *lg, unsigned long pgtable)
 {
 	unsigned int i;
@@ -563,9 +647,11 @@ static unsigned int find_pgdir(struct lguest *lg, unsigned long pgtable)
 	return i;
 }
 
-/*H:435 And this is us, creating the new page directory.  If we really do
+/*H:435
+ * And this is us, creating the new page directory.  If we really do
  * allocate a new one (and so the kernel parts are not there), we set
- * blank_pgdir. */
+ * blank_pgdir.
+ */
 static unsigned int new_pgdir(struct lg_cpu *cpu,
 			      unsigned long gpgdir,
 			      int *blank_pgdir)
@@ -575,8 +661,10 @@ static unsigned int new_pgdir(struct lg_cpu *cpu,
 	pmd_t *pmd_table;
 #endif
 
-	/* We pick one entry at random to throw out.  Choosing the Least
-	 * Recently Used might be better, but this is easy. */
+	/*
+	 * We pick one entry at random to throw out.  Choosing the Least
+	 * Recently Used might be better, but this is easy.
+	 */
 	next = random32() % ARRAY_SIZE(cpu->lg->pgdirs);
 	/* If it's never been allocated at all before, try now. */
 	if (!cpu->lg->pgdirs[next].pgdir) {
@@ -587,8 +675,10 @@ static unsigned int new_pgdir(struct lg_cpu *cpu,
 			next = cpu->cpu_pgd;
 		else {
 #ifdef CONFIG_X86_PAE
-			/* In PAE mode, allocate a pmd page and populate the
-			 * last pgd entry. */
+			/*
+			 * In PAE mode, allocate a pmd page and populate the
+			 * last pgd entry.
+			 */
 			pmd_table = (pmd_t *)get_zeroed_page(GFP_KERNEL);
 			if (!pmd_table) {
 				free_page((long)cpu->lg->pgdirs[next].pgdir);
@@ -598,8 +688,10 @@ static unsigned int new_pgdir(struct lg_cpu *cpu,
 				set_pgd(cpu->lg->pgdirs[next].pgdir +
 					SWITCHER_PGD_INDEX,
 					__pgd(__pa(pmd_table) | _PAGE_PRESENT));
-				/* This is a blank page, so there are no kernel
-				 * mappings: caller must map the stack! */
+				/*
+				 * This is a blank page, so there are no kernel
+				 * mappings: caller must map the stack!
+				 */
 				*blank_pgdir = 1;
 			}
 #else
@@ -615,19 +707,23 @@ static unsigned int new_pgdir(struct lg_cpu *cpu,
 	return next;
 }
 
-/*H:430 (iv) Switching page tables
+/*H:430
+ * (iv) Switching page tables
  *
  * Now we've seen all the page table setting and manipulation, let's see
  * what happens when the Guest changes page tables (ie. changes the top-level
- * pgdir).  This occurs on almost every context switch. */
+ * pgdir).  This occurs on almost every context switch.
+ */
 void guest_new_pagetable(struct lg_cpu *cpu, unsigned long pgtable)
 {
 	int newpgdir, repin = 0;
 
 	/* Look to see if we have this one already. */
 	newpgdir = find_pgdir(cpu->lg, pgtable);
-	/* If not, we allocate or mug an existing one: if it's a fresh one,
-	 * repin gets set to 1. */
+	/*
+	 * If not, we allocate or mug an existing one: if it's a fresh one,
+	 * repin gets set to 1.
+	 */
 	if (newpgdir == ARRAY_SIZE(cpu->lg->pgdirs))
 		newpgdir = new_pgdir(cpu, pgtable, &repin);
 	/* Change the current pgd index to the new one. */
@@ -637,9 +733,11 @@ void guest_new_pagetable(struct lg_cpu *cpu, unsigned long pgtable)
 		pin_stack_pages(cpu);
 }
 
-/*H:470 Finally, a routine which throws away everything: all PGD entries in all
+/*H:470
+ * Finally, a routine which throws away everything: all PGD entries in all
  * the shadow page tables, including the Guest's kernel mappings.  This is used
- * when we destroy the Guest. */
+ * when we destroy the Guest.
+ */
 static void release_all_pagetables(struct lguest *lg)
 {
 	unsigned int i, j;
@@ -656,8 +754,10 @@ static void release_all_pagetables(struct lguest *lg)
 			spgd = lg->pgdirs[i].pgdir + SWITCHER_PGD_INDEX;
 			pmdpage = __va(pgd_pfn(*spgd) << PAGE_SHIFT);
 
-			/* And release the pmd entries of that pmd page,
-			 * except for the switcher pmd. */
+			/*
+			 * And release the pmd entries of that pmd page,
+			 * except for the switcher pmd.
+			 */
 			for (k = 0; k < SWITCHER_PMD_INDEX; k++)
 				release_pmd(&pmdpage[k]);
 #endif
@@ -667,10 +767,12 @@ static void release_all_pagetables(struct lguest *lg)
 		}
 }
 
-/* We also throw away everything when a Guest tells us it's changed a kernel
+/*
+ * We also throw away everything when a Guest tells us it's changed a kernel
  * mapping.  Since kernel mappings are in every page table, it's easiest to
  * throw them all away.  This traps the Guest in amber for a while as
- * everything faults back in, but it's rare. */
+ * everything faults back in, but it's rare.
+ */
 void guest_pagetable_clear_all(struct lg_cpu *cpu)
 {
 	release_all_pagetables(cpu->lg);
@@ -678,15 +780,19 @@ void guest_pagetable_clear_all(struct lg_cpu *cpu)
 	pin_stack_pages(cpu);
 }
 /*:*/
-/*M:009 Since we throw away all mappings when a kernel mapping changes, our
+
+/*M:009
+ * Since we throw away all mappings when a kernel mapping changes, our
  * performance sucks for guests using highmem.  In fact, a guest with
  * PAGE_OFFSET 0xc0000000 (the default) and more than about 700MB of RAM is
  * usually slower than a Guest with less memory.
  *
  * This, of course, cannot be fixed.  It would take some kind of... well, I
- * don't know, but the term "puissant code-fu" comes to mind. :*/
+ * don't know, but the term "puissant code-fu" comes to mind.
+:*/
 
-/*H:420 This is the routine which actually sets the page table entry for then
+/*H:420
+ * This is the routine which actually sets the page table entry for then
  * "idx"'th shadow page table.
  *
  * Normally, we can just throw out the old entry and replace it with 0: if they
@@ -715,31 +821,36 @@ static void do_set_pte(struct lg_cpu *cpu, int idx,
 		spmd = spmd_addr(cpu, *spgd, vaddr);
 		if (pmd_flags(*spmd) & _PAGE_PRESENT) {
 #endif
-			/* Otherwise, we start by releasing
-			 * the existing entry. */
+			/* Otherwise, start by releasing the existing entry. */
 			pte_t *spte = spte_addr(cpu, *spgd, vaddr);
 			release_pte(*spte);
 
-			/* If they're setting this entry as dirty or accessed,
-			 * we might as well put that entry they've given us
-			 * in now.  This shaves 10% off a
-			 * copy-on-write micro-benchmark. */
+			/*
+			 * If they're setting this entry as dirty or accessed,
+			 * we might as well put that entry they've given us in
+			 * now.  This shaves 10% off a copy-on-write
+			 * micro-benchmark.
+			 */
 			if (pte_flags(gpte) & (_PAGE_DIRTY | _PAGE_ACCESSED)) {
 				check_gpte(cpu, gpte);
 				native_set_pte(spte,
 						gpte_to_spte(cpu, gpte,
 						pte_flags(gpte) & _PAGE_DIRTY));
-			} else
-				/* Otherwise kill it and we can demand_page()
-				 * it in later. */
+			} else {
+				/*
+				 * Otherwise kill it and we can demand_page()
+				 * it in later.
+				 */
 				native_set_pte(spte, __pte(0));
+			}
 #ifdef CONFIG_X86_PAE
 		}
 #endif
 	}
 }
 
-/*H:410 Updating a PTE entry is a little trickier.
+/*H:410
+ * Updating a PTE entry is a little trickier.
  *
  * We keep track of several different page tables (the Guest uses one for each
  * process, so it makes sense to cache at least a few).  Each of these have
@@ -748,12 +859,15 @@ static void do_set_pte(struct lg_cpu *cpu, int idx,
  * all the page tables, not just the current one.  This is rare.
  *
  * The benefit is that when we have to track a new page table, we can keep all
- * the kernel mappings.  This speeds up context switch immensely. */
+ * the kernel mappings.  This speeds up context switch immensely.
+ */
 void guest_set_pte(struct lg_cpu *cpu,
 		   unsigned long gpgdir, unsigned long vaddr, pte_t gpte)
 {
-	/* Kernel mappings must be changed on all top levels.  Slow, but doesn't
-	 * happen often. */
+	/*
+	 * Kernel mappings must be changed on all top levels.  Slow, but doesn't
+	 * happen often.
+	 */
 	if (vaddr >= cpu->lg->kernel_address) {
 		unsigned int i;
 		for (i = 0; i < ARRAY_SIZE(cpu->lg->pgdirs); i++)
@@ -795,19 +909,25 @@ void guest_set_pgd(struct lguest *lg, unsigned long gpgdir, u32 idx)
 		/* ... throw it away. */
 		release_pgd(lg->pgdirs[pgdir].pgdir + idx);
 }
+
 #ifdef CONFIG_X86_PAE
+/* For setting a mid-level, we just throw everything away.  It's easy. */
 void guest_set_pmd(struct lguest *lg, unsigned long pmdp, u32 idx)
 {
 	guest_pagetable_clear_all(&lg->cpus[0]);
 }
 #endif
 
-/* Once we know how much memory we have we can construct simple identity
- * (which set virtual == physical) and linear mappings
- * which will get the Guest far enough into the boot to create its own.
+/*H:505
+ * To get through boot, we construct simple identity page mappings (which
+ * set virtual == physical) and linear mappings which will get the Guest far
+ * enough into the boot to create its own.  The linear mapping means we
+ * simplify the Guest boot, but it makes assumptions about their PAGE_OFFSET,
+ * as you'll see.
  *
  * We lay them out of the way, just below the initrd (which is why we need to
- * know its size here). */
+ * know its size here).
+ */
 static unsigned long setup_pagetables(struct lguest *lg,
 				      unsigned long mem,
 				      unsigned long initrd_size)
@@ -825,8 +945,10 @@ static unsigned long setup_pagetables(struct lguest *lg,
 	unsigned int phys_linear;
 #endif
 
-	/* We have mapped_pages frames to map, so we need
-	 * linear_pages page tables to map them. */
+	/*
+	 * We have mapped_pages frames to map, so we need linear_pages page
+	 * tables to map them.
+	 */
 	mapped_pages = mem / PAGE_SIZE;
 	linear_pages = (mapped_pages + PTRS_PER_PTE - 1) / PTRS_PER_PTE;
 
@@ -837,10 +959,16 @@ static unsigned long setup_pagetables(struct lguest *lg,
 	linear = (void *)pgdir - linear_pages * PAGE_SIZE;
 
 #ifdef CONFIG_X86_PAE
+	/*
+	 * And the single mid page goes below that.  We only use one, but
+	 * that's enough to map 1G, which definitely gets us through boot.
+	 */
 	pmds = (void *)linear - PAGE_SIZE;
 #endif
-	/* Linear mapping is easy: put every page's address into the
-	 * mapping in order. */
+	/*
+	 * Linear mapping is easy: put every page's address into the
+	 * mapping in order.
+	 */
 	for (i = 0; i < mapped_pages; i++) {
 		pte_t pte;
 		pte = pfn_pte(i, __pgprot(_PAGE_PRESENT|_PAGE_RW|_PAGE_USER));
@@ -848,11 +976,14 @@ static unsigned long setup_pagetables(struct lguest *lg,
 			return -EFAULT;
 	}
 
-	/* The top level points to the linear page table pages above.
-	 * We setup the identity and linear mappings here. */
 #ifdef CONFIG_X86_PAE
+	/*
+	 * Make the Guest PMD entries point to the corresponding place in the
+	 * linear mapping (up to one page worth of PMD).
+	 */
 	for (i = j = 0; i < mapped_pages && j < PTRS_PER_PMD;
 	     i += PTRS_PER_PTE, j++) {
+		/* FIXME: native_set_pmd is overkill here. */
 		native_set_pmd(&pmd, __pmd(((unsigned long)(linear + i)
 		- mem_base) | _PAGE_PRESENT | _PAGE_RW | _PAGE_USER));
 
@@ -860,18 +991,36 @@ static unsigned long setup_pagetables(struct lguest *lg,
 			return -EFAULT;
 	}
 
+	/* One PGD entry, pointing to that PMD page. */
 	set_pgd(&pgd, __pgd(((u32)pmds - mem_base) | _PAGE_PRESENT));
+	/* Copy it in as the first PGD entry (ie. addresses 0-1G). */
 	if (copy_to_user(&pgdir[0], &pgd, sizeof(pgd)) != 0)
 		return -EFAULT;
+	/*
+	 * And the third PGD entry (ie. addresses 3G-4G).
+	 *
+	 * FIXME: This assumes that PAGE_OFFSET for the Guest is 0xC0000000.
+	 */
 	if (copy_to_user(&pgdir[3], &pgd, sizeof(pgd)) != 0)
 		return -EFAULT;
 #else
+	/*
+	 * The top level points to the linear page table pages above.
+	 * We setup the identity and linear mappings here.
+	 */
 	phys_linear = (unsigned long)linear - mem_base;
 	for (i = 0; i < mapped_pages; i += PTRS_PER_PTE) {
 		pgd_t pgd;
+		/*
+		 * Create a PGD entry which points to the right part of the
+		 * linear PTE pages.
+		 */
 		pgd = __pgd((phys_linear + i * sizeof(pte_t)) |
 			    (_PAGE_PRESENT | _PAGE_RW | _PAGE_USER));
 
+		/*
+		 * Copy it into the PGD page at 0 and PAGE_OFFSET.
+		 */
 		if (copy_to_user(&pgdir[i / PTRS_PER_PTE], &pgd, sizeof(pgd))
 		    || copy_to_user(&pgdir[pgd_index(PAGE_OFFSET)
 					   + i / PTRS_PER_PTE],
@@ -880,15 +1029,19 @@ static unsigned long setup_pagetables(struct lguest *lg,
 	}
 #endif
 
-	/* We return the top level (guest-physical) address: remember where
-	 * this is. */
+	/*
+	 * We return the top level (guest-physical) address: we remember where
+	 * this is to write it into lguest_data when the Guest initializes.
+	 */
 	return (unsigned long)pgdir - mem_base;
 }
 
-/*H:500 (vii) Setting up the page tables initially.
+/*H:500
+ * (vii) Setting up the page tables initially.
  *
  * When a Guest is first created, the Launcher tells us where the toplevel of
- * its first page table is.  We set some things up here: */
+ * its first page table is.  We set some things up here:
+ */
 int init_guest_pagetable(struct lguest *lg)
 {
 	u64 mem;
@@ -898,21 +1051,27 @@ int init_guest_pagetable(struct lguest *lg)
 	pgd_t *pgd;
 	pmd_t *pmd_table;
 #endif
-	/* Get the Guest memory size and the ramdisk size from the boot header
-	 * located at lg->mem_base (Guest address 0). */
+	/*
+	 * Get the Guest memory size and the ramdisk size from the boot header
+	 * located at lg->mem_base (Guest address 0).
+	 */
 	if (copy_from_user(&mem, &boot->e820_map[0].size, sizeof(mem))
 	    || get_user(initrd_size, &boot->hdr.ramdisk_size))
 		return -EFAULT;
 
-	/* We start on the first shadow page table, and give it a blank PGD
-	 * page. */
+	/*
+	 * We start on the first shadow page table, and give it a blank PGD
+	 * page.
+	 */
 	lg->pgdirs[0].gpgdir = setup_pagetables(lg, mem, initrd_size);
 	if (IS_ERR_VALUE(lg->pgdirs[0].gpgdir))
 		return lg->pgdirs[0].gpgdir;
 	lg->pgdirs[0].pgdir = (pgd_t *)get_zeroed_page(GFP_KERNEL);
 	if (!lg->pgdirs[0].pgdir)
 		return -ENOMEM;
+
 #ifdef CONFIG_X86_PAE
+	/* For PAE, we also create the initial mid-level. */
 	pgd = lg->pgdirs[0].pgdir;
 	pmd_table = (pmd_t *) get_zeroed_page(GFP_KERNEL);
 	if (!pmd_table)
@@ -921,27 +1080,33 @@ int init_guest_pagetable(struct lguest *lg)
 	set_pgd(pgd + SWITCHER_PGD_INDEX,
 		__pgd(__pa(pmd_table) | _PAGE_PRESENT));
 #endif
+
+	/* This is the current page table. */
 	lg->cpus[0].cpu_pgd = 0;
 	return 0;
 }
 
-/* When the Guest calls LHCALL_LGUEST_INIT we do more setup. */
+/*H:508 When the Guest calls LHCALL_LGUEST_INIT we do more setup. */
 void page_table_guest_data_init(struct lg_cpu *cpu)
 {
 	/* We get the kernel address: above this is all kernel memory. */
 	if (get_user(cpu->lg->kernel_address,
 		&cpu->lg->lguest_data->kernel_address)
-		/* We tell the Guest that it can't use the top 2 or 4 MB
-		 * of virtual addresses used by the Switcher. */
+		/*
+		 * We tell the Guest that it can't use the top 2 or 4 MB
+		 * of virtual addresses used by the Switcher.
+		 */
 		|| put_user(RESERVE_MEM * 1024 * 1024,
 			&cpu->lg->lguest_data->reserve_mem)
 		|| put_user(cpu->lg->pgdirs[0].gpgdir,
 			&cpu->lg->lguest_data->pgdir))
 		kill_guest(cpu, "bad guest page %p", cpu->lg->lguest_data);
 
-	/* In flush_user_mappings() we loop from 0 to
+	/*
+	 * In flush_user_mappings() we loop from 0 to
 	 * "pgd_index(lg->kernel_address)".  This assumes it won't hit the
-	 * Switcher mappings, so check that now. */
+	 * Switcher mappings, so check that now.
+	 */
 #ifdef CONFIG_X86_PAE
 	if (pgd_index(cpu->lg->kernel_address) == SWITCHER_PGD_INDEX &&
 		pmd_index(cpu->lg->kernel_address) == SWITCHER_PMD_INDEX)
@@ -964,12 +1129,14 @@ void free_guest_pagetable(struct lguest *lg)
 		free_page((long)lg->pgdirs[i].pgdir);
 }
 
-/*H:480 (vi) Mapping the Switcher when the Guest is about to run.
+/*H:480
+ * (vi) Mapping the Switcher when the Guest is about to run.
  *
  * The Switcher and the two pages for this CPU need to be visible in the
  * Guest (and not the pages for other CPUs).  We have the appropriate PTE pages
  * for each CPU already set up, we just need to hook them in now we know which
- * Guest is about to run on this CPU. */
+ * Guest is about to run on this CPU.
+ */
 void map_switcher_in_guest(struct lg_cpu *cpu, struct lguest_pages *pages)
 {
 	pte_t *switcher_pte_page = __get_cpu_var(switcher_pte_pages);
@@ -980,30 +1147,38 @@ void map_switcher_in_guest(struct lg_cpu *cpu, struct lguest_pages *pages)
 	pmd_t switcher_pmd;
 	pmd_t *pmd_table;
 
+	/* FIXME: native_set_pmd is overkill here. */
 	native_set_pmd(&switcher_pmd, pfn_pmd(__pa(switcher_pte_page) >>
 		       PAGE_SHIFT, PAGE_KERNEL_EXEC));
 
+	/* Figure out where the pmd page is, by reading the PGD, and converting
+	 * it to a virtual address. */
 	pmd_table = __va(pgd_pfn(cpu->lg->
 			pgdirs[cpu->cpu_pgd].pgdir[SWITCHER_PGD_INDEX])
 								<< PAGE_SHIFT);
+	/* Now write it into the shadow page table. */
 	native_set_pmd(&pmd_table[SWITCHER_PMD_INDEX], switcher_pmd);
 #else
 	pgd_t switcher_pgd;
 
-	/* Make the last PGD entry for this Guest point to the Switcher's PTE
-	 * page for this CPU (with appropriate flags). */
+	/*
+	 * Make the last PGD entry for this Guest point to the Switcher's PTE
+	 * page for this CPU (with appropriate flags).
+	 */
 	switcher_pgd = __pgd(__pa(switcher_pte_page) | __PAGE_KERNEL_EXEC);
 
 	cpu->lg->pgdirs[cpu->cpu_pgd].pgdir[SWITCHER_PGD_INDEX] = switcher_pgd;
 
 #endif
-	/* We also change the Switcher PTE page.  When we're running the Guest,
+	/*
+	 * We also change the Switcher PTE page.  When we're running the Guest,
 	 * we want the Guest's "regs" page to appear where the first Switcher
 	 * page for this CPU is.  This is an optimization: when the Switcher
 	 * saves the Guest registers, it saves them into the first page of this
 	 * CPU's "struct lguest_pages": if we make sure the Guest's register
 	 * page is already mapped there, we don't have to copy them out
-	 * again. */
+	 * again.
+	 */
 	pfn = __pa(cpu->regs_page) >> PAGE_SHIFT;
 	native_set_pte(&regs_pte, pfn_pte(pfn, PAGE_KERNEL));
 	native_set_pte(&switcher_pte_page[pte_index((unsigned long)pages)],
@@ -1019,10 +1194,12 @@ static void free_switcher_pte_pages(void)
 		free_page((long)switcher_pte_page(i));
 }
 
-/*H:520 Setting up the Switcher PTE page for given CPU is fairly easy, given
+/*H:520
+ * Setting up the Switcher PTE page for given CPU is fairly easy, given
  * the CPU number and the "struct page"s for the Switcher code itself.
  *
- * Currently the Switcher is less than a page long, so "pages" is always 1. */
+ * Currently the Switcher is less than a page long, so "pages" is always 1.
+ */
 static __init void populate_switcher_pte_page(unsigned int cpu,
 					      struct page *switcher_page[],
 					      unsigned int pages)
@@ -1043,13 +1220,16 @@ static __init void populate_switcher_pte_page(unsigned int cpu,
 	native_set_pte(&pte[i], pfn_pte(page_to_pfn(switcher_page[i]),
 			 __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED|_PAGE_RW)));
 
-	/* The second page contains the "struct lguest_ro_state", and is
-	 * read-only. */
+	/*
+	 * The second page contains the "struct lguest_ro_state", and is
+	 * read-only.
+	 */
 	native_set_pte(&pte[i+1], pfn_pte(page_to_pfn(switcher_page[i+1]),
 			   __pgprot(_PAGE_PRESENT|_PAGE_ACCESSED)));
 }
 
-/* We've made it through the page table code.  Perhaps our tired brains are
+/*
+ * We've made it through the page table code.  Perhaps our tired brains are
  * still processing the details, or perhaps we're simply glad it's over.
  *
  * If nothing else, note that all this complexity in juggling shadow page tables
@@ -1058,10 +1238,13 @@ static __init void populate_switcher_pte_page(unsigned int cpu,
  * uses exotic direct Guest pagetable manipulation, and why both Intel and AMD
  * have implemented shadow page table support directly into hardware.
  *
- * There is just one file remaining in the Host. */
+ * There is just one file remaining in the Host.
+ */
 
-/*H:510 At boot or module load time, init_pagetables() allocates and populates
- * the Switcher PTE page for each CPU. */
+/*H:510
+ * At boot or module load time, init_pagetables() allocates and populates
+ * the Switcher PTE page for each CPU.
+ */
 __init int init_pagetables(struct page **switcher_page, unsigned int pages)
 {
 	unsigned int i;
diff --git a/drivers/lguest/segments.c b/drivers/lguest/segments.c
index 482ed5a..951c57b 100644
--- a/drivers/lguest/segments.c
+++ b/drivers/lguest/segments.c
@@ -1,4 +1,5 @@
-/*P:600 The x86 architecture has segments, which involve a table of descriptors
+/*P:600
+ * The x86 architecture has segments, which involve a table of descriptors
  * which can be used to do funky things with virtual address interpretation.
  * We originally used to use segments so the Guest couldn't alter the
  * Guest<->Host Switcher, and then we had to trim Guest segments, and restore
@@ -8,7 +9,8 @@
  *
  * In these modern times, the segment handling code consists of simple sanity
  * checks, and the worst you'll experience reading this code is butterfly-rash
- * from frolicking through its parklike serenity. :*/
+ * from frolicking through its parklike serenity.
+:*/
 #include "lg.h"
 
 /*H:600
@@ -41,10 +43,12 @@
  * begin.
  */
 
-/* There are several entries we don't let the Guest set.  The TSS entry is the
+/*
+ * There are several entries we don't let the Guest set.  The TSS entry is the
  * "Task State Segment" which controls all kinds of delicate things.  The
  * LGUEST_CS and LGUEST_DS entries are reserved for the Switcher, and the
- * the Guest can't be trusted to deal with double faults. */
+ * the Guest can't be trusted to deal with double faults.
+ */
 static bool ignored_gdt(unsigned int num)
 {
 	return (num == GDT_ENTRY_TSS
@@ -53,42 +57,52 @@ static bool ignored_gdt(unsigned int num)
 		|| num == GDT_ENTRY_DOUBLEFAULT_TSS);
 }
 
-/*H:630 Once the Guest gave us new GDT entries, we fix them up a little.  We
+/*H:630
+ * Once the Guest gave us new GDT entries, we fix them up a little.  We
  * don't care if they're invalid: the worst that can happen is a General
  * Protection Fault in the Switcher when it restores a Guest segment register
  * which tries to use that entry.  Then we kill the Guest for causing such a
- * mess: the message will be "unhandled trap 256". */
+ * mess: the message will be "unhandled trap 256".
+ */
 static void fixup_gdt_table(struct lg_cpu *cpu, unsigned start, unsigned end)
 {
 	unsigned int i;
 
 	for (i = start; i < end; i++) {
-		/* We never copy these ones to real GDT, so we don't care what
-		 * they say */
+		/*
+		 * We never copy these ones to real GDT, so we don't care what
+		 * they say
+		 */
 		if (ignored_gdt(i))
 			continue;
 
-		/* Segment descriptors contain a privilege level: the Guest is
+		/*
+		 * Segment descriptors contain a privilege level: the Guest is
 		 * sometimes careless and leaves this as 0, even though it's
-		 * running at privilege level 1.  If so, we fix it here. */
+		 * running at privilege level 1.  If so, we fix it here.
+		 */
 		if ((cpu->arch.gdt[i].b & 0x00006000) == 0)
 			cpu->arch.gdt[i].b |= (GUEST_PL << 13);
 
-		/* Each descriptor has an "accessed" bit.  If we don't set it
+		/*
+		 * Each descriptor has an "accessed" bit.  If we don't set it
 		 * now, the CPU will try to set it when the Guest first loads
 		 * that entry into a segment register.  But the GDT isn't
-		 * writable by the Guest, so bad things can happen. */
+		 * writable by the Guest, so bad things can happen.
+		 */
 		cpu->arch.gdt[i].b |= 0x00000100;
 	}
 }
 
-/*H:610 Like the IDT, we never simply use the GDT the Guest gives us.  We keep
+/*H:610
+ * Like the IDT, we never simply use the GDT the Guest gives us.  We keep
  * a GDT for each CPU, and copy across the Guest's entries each time we want to
  * run the Guest on that CPU.
  *
  * This routine is called at boot or modprobe time for each CPU to set up the
  * constant GDT entries: the ones which are the same no matter what Guest we're
- * running. */
+ * running.
+ */
 void setup_default_gdt_entries(struct lguest_ro_state *state)
 {
 	struct desc_struct *gdt = state->guest_gdt;
@@ -98,30 +112,37 @@ void setup_default_gdt_entries(struct lguest_ro_state *state)
 	gdt[GDT_ENTRY_LGUEST_CS] = FULL_EXEC_SEGMENT;
 	gdt[GDT_ENTRY_LGUEST_DS] = FULL_SEGMENT;
 
-	/* The TSS segment refers to the TSS entry for this particular CPU.
+	/*
+	 * The TSS segment refers to the TSS entry for this particular CPU.
 	 * Forgive the magic flags: the 0x8900 means the entry is Present, it's
 	 * privilege level 0 Available 386 TSS system segment, and the 0x67
-	 * means Saturn is eclipsed by Mercury in the twelfth house. */
+	 * means Saturn is eclipsed by Mercury in the twelfth house.
+	 */
 	gdt[GDT_ENTRY_TSS].a = 0x00000067 | (tss << 16);
 	gdt[GDT_ENTRY_TSS].b = 0x00008900 | (tss & 0xFF000000)
 		| ((tss >> 16) & 0x000000FF);
 }
 
-/* This routine sets up the initial Guest GDT for booting.  All entries start
- * as 0 (unusable). */
+/*
+ * This routine sets up the initial Guest GDT for booting.  All entries start
+ * as 0 (unusable).
+ */
 void setup_guest_gdt(struct lg_cpu *cpu)
 {
-	/* Start with full 0-4G segments... */
+	/*
+	 * Start with full 0-4G segments...except the Guest is allowed to use
+	 * them, so set the privilege level appropriately in the flags.
+	 */
 	cpu->arch.gdt[GDT_ENTRY_KERNEL_CS] = FULL_EXEC_SEGMENT;
 	cpu->arch.gdt[GDT_ENTRY_KERNEL_DS] = FULL_SEGMENT;
-	/* ...except the Guest is allowed to use them, so set the privilege
-	 * level appropriately in the flags. */
 	cpu->arch.gdt[GDT_ENTRY_KERNEL_CS].b |= (GUEST_PL << 13);
 	cpu->arch.gdt[GDT_ENTRY_KERNEL_DS].b |= (GUEST_PL << 13);
 }
 
-/*H:650 An optimization of copy_gdt(), for just the three "thead-local storage"
- * entries. */
+/*H:650
+ * An optimization of copy_gdt(), for just the three "thead-local storage"
+ * entries.
+ */
 void copy_gdt_tls(const struct lg_cpu *cpu, struct desc_struct *gdt)
 {
 	unsigned int i;
@@ -130,26 +151,34 @@ void copy_gdt_tls(const struct lg_cpu *cpu, struct desc_struct *gdt)
 		gdt[i] = cpu->arch.gdt[i];
 }
 
-/*H:640 When the Guest is run on a different CPU, or the GDT entries have
- * changed, copy_gdt() is called to copy the Guest's GDT entries across to this
- * CPU's GDT. */
+/*H:640
+ * When the Guest is run on a different CPU, or the GDT entries have changed,
+ * copy_gdt() is called to copy the Guest's GDT entries across to this CPU's
+ * GDT.
+ */
 void copy_gdt(const struct lg_cpu *cpu, struct desc_struct *gdt)
 {
 	unsigned int i;
 
-	/* The default entries from setup_default_gdt_entries() are not
-	 * replaced.  See ignored_gdt() above. */
+	/*
+	 * The default entries from setup_default_gdt_entries() are not
+	 * replaced.  See ignored_gdt() above.
+	 */
 	for (i = 0; i < GDT_ENTRIES; i++)
 		if (!ignored_gdt(i))
 			gdt[i] = cpu->arch.gdt[i];
 }
 
-/*H:620 This is where the Guest asks us to load a new GDT entry
- * (LHCALL_LOAD_GDT_ENTRY).  We tweak the entry and copy it in. */
+/*H:620
+ * This is where the Guest asks us to load a new GDT entry
+ * (LHCALL_LOAD_GDT_ENTRY).  We tweak the entry and copy it in.
+ */
 void load_guest_gdt_entry(struct lg_cpu *cpu, u32 num, u32 lo, u32 hi)
 {
-	/* We assume the Guest has the same number of GDT entries as the
-	 * Host, otherwise we'd have to dynamically allocate the Guest GDT. */
+	/*
+	 * We assume the Guest has the same number of GDT entries as the
+	 * Host, otherwise we'd have to dynamically allocate the Guest GDT.
+	 */
 	if (num >= ARRAY_SIZE(cpu->arch.gdt))
 		kill_guest(cpu, "too many gdt entries %i", num);
 
@@ -157,15 +186,19 @@ void load_guest_gdt_entry(struct lg_cpu *cpu, u32 num, u32 lo, u32 hi)
 	cpu->arch.gdt[num].a = lo;
 	cpu->arch.gdt[num].b = hi;
 	fixup_gdt_table(cpu, num, num+1);
-	/* Mark that the GDT changed so the core knows it has to copy it again,
-	 * even if the Guest is run on the same CPU. */
+	/*
+	 * Mark that the GDT changed so the core knows it has to copy it again,
+	 * even if the Guest is run on the same CPU.
+	 */
 	cpu->changed |= CHANGED_GDT;
 }
 
-/* This is the fast-track version for just changing the three TLS entries.
+/*
+ * This is the fast-track version for just changing the three TLS entries.
  * Remember that this happens on every context switch, so it's worth
  * optimizing.  But wouldn't it be neater to have a single hypercall to cover
- * both cases? */
+ * both cases?
+ */
 void guest_load_tls(struct lg_cpu *cpu, unsigned long gtls)
 {
 	struct desc_struct *tls = &cpu->arch.gdt[GDT_ENTRY_TLS_MIN];
@@ -175,7 +208,6 @@ void guest_load_tls(struct lg_cpu *cpu, unsigned long gtls)
 	/* Note that just the TLS entries have changed. */
 	cpu->changed |= CHANGED_GDT_TLS;
 }
-/*:*/
 
 /*H:660
  * With this, we have finished the Host.
diff --git a/drivers/lguest/x86/core.c b/drivers/lguest/x86/core.c
index eaf722f..6ae3888 100644
--- a/drivers/lguest/x86/core.c
+++ b/drivers/lguest/x86/core.c
@@ -17,13 +17,15 @@
  * along with this program; if not, write to the Free Software
  * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
  */
-/*P:450 This file contains the x86-specific lguest code.  It used to be all
+/*P:450
+ * This file contains the x86-specific lguest code.  It used to be all
  * mixed in with drivers/lguest/core.c but several foolhardy code slashers
  * wrestled most of the dependencies out to here in preparation for porting
  * lguest to other architectures (see what I mean by foolhardy?).
  *
  * This also contains a couple of non-obvious setup and teardown pieces which
- * were implemented after days of debugging pain. :*/
+ * were implemented after days of debugging pain.
+:*/
 #include <linux/kernel.h>
 #include <linux/start_kernel.h>
 #include <linux/string.h>
@@ -82,25 +84,33 @@ static DEFINE_PER_CPU(struct lg_cpu *, last_cpu);
  */
 static void copy_in_guest_info(struct lg_cpu *cpu, struct lguest_pages *pages)
 {
-	/* Copying all this data can be quite expensive.  We usually run the
+	/*
+	 * Copying all this data can be quite expensive.  We usually run the
 	 * same Guest we ran last time (and that Guest hasn't run anywhere else
 	 * meanwhile).  If that's not the case, we pretend everything in the
-	 * Guest has changed. */
+	 * Guest has changed.
+	 */
 	if (__get_cpu_var(last_cpu) != cpu || cpu->last_pages != pages) {
 		__get_cpu_var(last_cpu) = cpu;
 		cpu->last_pages = pages;
 		cpu->changed = CHANGED_ALL;
 	}
 
-	/* These copies are pretty cheap, so we do them unconditionally: */
-	/* Save the current Host top-level page directory. */
+	/*
+	 * These copies are pretty cheap, so we do them unconditionally: */
+	/* Save the current Host top-level page directory.
+	 */
 	pages->state.host_cr3 = __pa(current->mm->pgd);
-	/* Set up the Guest's page tables to see this CPU's pages (and no
-	 * other CPU's pages). */
+	/*
+	 * Set up the Guest's page tables to see this CPU's pages (and no
+	 * other CPU's pages).
+	 */
 	map_switcher_in_guest(cpu, pages);
-	/* Set up the two "TSS" members which tell the CPU what stack to use
+	/*
+	 * Set up the two "TSS" members which tell the CPU what stack to use
 	 * for traps which do directly into the Guest (ie. traps at privilege
-	 * level 1). */
+	 * level 1).
+	 */
 	pages->state.guest_tss.sp1 = cpu->esp1;
 	pages->state.guest_tss.ss1 = cpu->ss1;
 
@@ -125,97 +135,126 @@ static void run_guest_once(struct lg_cpu *cpu, struct lguest_pages *pages)
 	/* This is a dummy value we need for GCC's sake. */
 	unsigned int clobber;
 
-	/* Copy the guest-specific information into this CPU's "struct
-	 * lguest_pages". */
+	/*
+	 * Copy the guest-specific information into this CPU's "struct
+	 * lguest_pages".
+	 */
 	copy_in_guest_info(cpu, pages);
 
-	/* Set the trap number to 256 (impossible value).  If we fault while
+	/*
+	 * Set the trap number to 256 (impossible value).  If we fault while
 	 * switching to the Guest (bad segment registers or bug), this will
-	 * cause us to abort the Guest. */
+	 * cause us to abort the Guest.
+	 */
 	cpu->regs->trapnum = 256;
 
-	/* Now: we push the "eflags" register on the stack, then do an "lcall".
+	/*
+	 * Now: we push the "eflags" register on the stack, then do an "lcall".
 	 * This is how we change from using the kernel code segment to using
 	 * the dedicated lguest code segment, as well as jumping into the
 	 * Switcher.
 	 *
 	 * The lcall also pushes the old code segment (KERNEL_CS) onto the
 	 * stack, then the address of this call.  This stack layout happens to
-	 * exactly match the stack layout created by an interrupt... */
+	 * exactly match the stack layout created by an interrupt...
+	 */
 	asm volatile("pushf; lcall *lguest_entry"
-		     /* This is how we tell GCC that %eax ("a") and %ebx ("b")
-		      * are changed by this routine.  The "=" means output. */
+		     /*
+		      * This is how we tell GCC that %eax ("a") and %ebx ("b")
+		      * are changed by this routine.  The "=" means output.
+		      */
 		     : "=a"(clobber), "=b"(clobber)
-		     /* %eax contains the pages pointer.  ("0" refers to the
+		     /*
+		      * %eax contains the pages pointer.  ("0" refers to the
 		      * 0-th argument above, ie "a").  %ebx contains the
 		      * physical address of the Guest's top-level page
-		      * directory. */
+		      * directory.
+		      */
 		     : "0"(pages), "1"(__pa(cpu->lg->pgdirs[cpu->cpu_pgd].pgdir))
-		     /* We tell gcc that all these registers could change,
+		     /*
+		      * We tell gcc that all these registers could change,
 		      * which means we don't have to save and restore them in
-		      * the Switcher. */
+		      * the Switcher.
+		      */
 		     : "memory", "%edx", "%ecx", "%edi", "%esi");
 }
 /*:*/
 
-/*M:002 There are hooks in the scheduler which we can register to tell when we
+/*M:002
+ * There are hooks in the scheduler which we can register to tell when we
  * get kicked off the CPU (preempt_notifier_register()).  This would allow us
  * to lazily disable SYSENTER which would regain some performance, and should
  * also simplify copy_in_guest_info().  Note that we'd still need to restore
  * things when we exit to Launcher userspace, but that's fairly easy.
  *
- * We could also try using this hooks for PGE, but that might be too expensive.
+ * We could also try using these hooks for PGE, but that might be too expensive.
  *
- * The hooks were designed for KVM, but we can also put them to good use. :*/
+ * The hooks were designed for KVM, but we can also put them to good use.
+:*/
 
-/*H:040 This is the i386-specific code to setup and run the Guest.  Interrupts
- * are disabled: we own the CPU. */
+/*H:040
+ * This is the i386-specific code to setup and run the Guest.  Interrupts
+ * are disabled: we own the CPU.
+ */
 void lguest_arch_run_guest(struct lg_cpu *cpu)
 {
-	/* Remember the awfully-named TS bit?  If the Guest has asked to set it
+	/*
+	 * Remember the awfully-named TS bit?  If the Guest has asked to set it
 	 * we set it now, so we can trap and pass that trap to the Guest if it
-	 * uses the FPU. */
+	 * uses the FPU.
+	 */
 	if (cpu->ts)
 		unlazy_fpu(current);
 
-	/* SYSENTER is an optimized way of doing system calls.  We can't allow
+	/*
+	 * SYSENTER is an optimized way of doing system calls.  We can't allow
 	 * it because it always jumps to privilege level 0.  A normal Guest
 	 * won't try it because we don't advertise it in CPUID, but a malicious
 	 * Guest (or malicious Guest userspace program) could, so we tell the
-	 * CPU to disable it before running the Guest. */
+	 * CPU to disable it before running the Guest.
+	 */
 	if (boot_cpu_has(X86_FEATURE_SEP))
 		wrmsr(MSR_IA32_SYSENTER_CS, 0, 0);
 
-	/* Now we actually run the Guest.  It will return when something
+	/*
+	 * Now we actually run the Guest.  It will return when something
 	 * interesting happens, and we can examine its registers to see what it
-	 * was doing. */
+	 * was doing.
+	 */
 	run_guest_once(cpu, lguest_pages(raw_smp_processor_id()));
 
-	/* Note that the "regs" structure contains two extra entries which are
+	/*
+	 * Note that the "regs" structure contains two extra entries which are
 	 * not really registers: a trap number which says what interrupt or
 	 * trap made the switcher code come back, and an error code which some
-	 * traps set.  */
+	 * traps set.
+	 */
 
 	 /* Restore SYSENTER if it's supposed to be on. */
 	 if (boot_cpu_has(X86_FEATURE_SEP))
 		wrmsr(MSR_IA32_SYSENTER_CS, __KERNEL_CS, 0);
 
-	/* If the Guest page faulted, then the cr2 register will tell us the
+	/*
+	 * If the Guest page faulted, then the cr2 register will tell us the
 	 * bad virtual address.  We have to grab this now, because once we
 	 * re-enable interrupts an interrupt could fault and thus overwrite
-	 * cr2, or we could even move off to a different CPU. */
+	 * cr2, or we could even move off to a different CPU.
+	 */
 	if (cpu->regs->trapnum == 14)
 		cpu->arch.last_pagefault = read_cr2();
-	/* Similarly, if we took a trap because the Guest used the FPU,
+	/*
+	 * Similarly, if we took a trap because the Guest used the FPU,
 	 * we have to restore the FPU it expects to see.
 	 * math_state_restore() may sleep and we may even move off to
 	 * a different CPU. So all the critical stuff should be done
-	 * before this.  */
+	 * before this.
+	 */
 	else if (cpu->regs->trapnum == 7)
 		math_state_restore();
 }
 
-/*H:130 Now we've examined the hypercall code; our Guest can make requests.
+/*H:130
+ * Now we've examined the hypercall code; our Guest can make requests.
  * Our Guest is usually so well behaved; it never tries to do things it isn't
  * allowed to, and uses hypercalls instead.  Unfortunately, Linux's paravirtual
  * infrastructure isn't quite complete, because it doesn't contain replacements
@@ -225,26 +264,33 @@ void lguest_arch_run_guest(struct lg_cpu *cpu)
  *
  * When the Guest uses one of these instructions, we get a trap (General
  * Protection Fault) and come here.  We see if it's one of those troublesome
- * instructions and skip over it.  We return true if we did. */
+ * instructions and skip over it.  We return true if we did.
+ */
 static int emulate_insn(struct lg_cpu *cpu)
 {
 	u8 insn;
 	unsigned int insnlen = 0, in = 0, shift = 0;
-	/* The eip contains the *virtual* address of the Guest's instruction:
-	 * guest_pa just subtracts the Guest's page_offset. */
+	/*
+	 * The eip contains the *virtual* address of the Guest's instruction:
+	 * guest_pa just subtracts the Guest's page_offset.
+	 */
 	unsigned long physaddr = guest_pa(cpu, cpu->regs->eip);
 
-	/* This must be the Guest kernel trying to do something, not userspace!
+	/*
+	 * This must be the Guest kernel trying to do something, not userspace!
 	 * The bottom two bits of the CS segment register are the privilege
-	 * level. */
+	 * level.
+	 */
 	if ((cpu->regs->cs & 3) != GUEST_PL)
 		return 0;
 
 	/* Decoding x86 instructions is icky. */
 	insn = lgread(cpu, physaddr, u8);
 
-	/* 0x66 is an "operand prefix".  It means it's using the upper 16 bits
-	   of the eax register. */
+	/*
+	 * 0x66 is an "operand prefix".  It means it's using the upper 16 bits
+	 * of the eax register.
+	 */
 	if (insn == 0x66) {
 		shift = 16;
 		/* The instruction is 1 byte so far, read the next byte. */
@@ -252,8 +298,10 @@ static int emulate_insn(struct lg_cpu *cpu)
 		insn = lgread(cpu, physaddr + insnlen, u8);
 	}
 
-	/* We can ignore the lower bit for the moment and decode the 4 opcodes
-	 * we need to emulate. */
+	/*
+	 * We can ignore the lower bit for the moment and decode the 4 opcodes
+	 * we need to emulate.
+	 */
 	switch (insn & 0xFE) {
 	case 0xE4: /* in     <next byte>,%al */
 		insnlen += 2;
@@ -274,9 +322,11 @@ static int emulate_insn(struct lg_cpu *cpu)
 		return 0;
 	}
 
-	/* If it was an "IN" instruction, they expect the result to be read
+	/*
+	 * If it was an "IN" instruction, they expect the result to be read
 	 * into %eax, so we change %eax.  We always return all-ones, which
-	 * traditionally means "there's nothing there". */
+	 * traditionally means "there's nothing there".
+	 */
 	if (in) {
 		/* Lower bit tells is whether it's a 16 or 32 bit access */
 		if (insn & 0x1)
@@ -290,7 +340,8 @@ static int emulate_insn(struct lg_cpu *cpu)
 	return 1;
 }
 
-/* Our hypercalls mechanism used to be based on direct software interrupts.
+/*
+ * Our hypercalls mechanism used to be based on direct software interrupts.
  * After Anthony's "Refactor hypercall infrastructure" kvm patch, we decided to
  * change over to using kvm hypercalls.
  *
@@ -318,16 +369,20 @@ static int emulate_insn(struct lg_cpu *cpu)
  */
 static void rewrite_hypercall(struct lg_cpu *cpu)
 {
-	/* This are the opcodes we use to patch the Guest.  The opcode for "int
+	/*
+	 * This are the opcodes we use to patch the Guest.  The opcode for "int
 	 * $0x1f" is "0xcd 0x1f" but vmcall instruction is 3 bytes long, so we
-	 * complete the sequence with a NOP (0x90). */
+	 * complete the sequence with a NOP (0x90).
+	 */
 	u8 insn[3] = {0xcd, 0x1f, 0x90};
 
 	__lgwrite(cpu, guest_pa(cpu, cpu->regs->eip), insn, sizeof(insn));
-	/* The above write might have caused a copy of that page to be made
+	/*
+	 * The above write might have caused a copy of that page to be made
 	 * (if it was read-only).  We need to make sure the Guest has
 	 * up-to-date pagetables.  As this doesn't happen often, we can just
-	 * drop them all. */
+	 * drop them all.
+	 */
 	guest_pagetable_clear_all(cpu);
 }
 
@@ -335,9 +390,11 @@ static bool is_hypercall(struct lg_cpu *cpu)
 {
 	u8 insn[3];
 
-	/* This must be the Guest kernel trying to do something.
+	/*
+	 * This must be the Guest kernel trying to do something.
 	 * The bottom two bits of the CS segment register are the privilege
-	 * level. */
+	 * level.
+	 */
 	if ((cpu->regs->cs & 3) != GUEST_PL)
 		return false;
 
@@ -351,86 +408,105 @@ void lguest_arch_handle_trap(struct lg_cpu *cpu)
 {
 	switch (cpu->regs->trapnum) {
 	case 13: /* We've intercepted a General Protection Fault. */
-		/* Check if this was one of those annoying IN or OUT
+		/*
+		 * Check if this was one of those annoying IN or OUT
 		 * instructions which we need to emulate.  If so, we just go
-		 * back into the Guest after we've done it. */
+		 * back into the Guest after we've done it.
+		 */
 		if (cpu->regs->errcode == 0) {
 			if (emulate_insn(cpu))
 				return;
 		}
-		/* If KVM is active, the vmcall instruction triggers a
-		 * General Protection Fault.  Normally it triggers an
-		 * invalid opcode fault (6): */
+		/*
+		 * If KVM is active, the vmcall instruction triggers a General
+		 * Protection Fault.  Normally it triggers an invalid opcode
+		 * fault (6):
+		 */
 	case 6:
-		/* We need to check if ring == GUEST_PL and
-		 * faulting instruction == vmcall. */
+		/*
+		 * We need to check if ring == GUEST_PL and faulting
+		 * instruction == vmcall.
+		 */
 		if (is_hypercall(cpu)) {
 			rewrite_hypercall(cpu);
 			return;
 		}
 		break;
 	case 14: /* We've intercepted a Page Fault. */
-		/* The Guest accessed a virtual address that wasn't mapped.
+		/*
+		 * The Guest accessed a virtual address that wasn't mapped.
 		 * This happens a lot: we don't actually set up most of the page
 		 * tables for the Guest at all when we start: as it runs it asks
 		 * for more and more, and we set them up as required. In this
 		 * case, we don't even tell the Guest that the fault happened.
 		 *
 		 * The errcode tells whether this was a read or a write, and
-		 * whether kernel or userspace code. */
+		 * whether kernel or userspace code.
+		 */
 		if (demand_page(cpu, cpu->arch.last_pagefault,
 				cpu->regs->errcode))
 			return;
 
-		/* OK, it's really not there (or not OK): the Guest needs to
+		/*
+		 * OK, it's really not there (or not OK): the Guest needs to
 		 * know.  We write out the cr2 value so it knows where the
 		 * fault occurred.
 		 *
 		 * Note that if the Guest were really messed up, this could
 		 * happen before it's done the LHCALL_LGUEST_INIT hypercall, so
-		 * lg->lguest_data could be NULL */
+		 * lg->lguest_data could be NULL
+		 */
 		if (cpu->lg->lguest_data &&
 		    put_user(cpu->arch.last_pagefault,
 			     &cpu->lg->lguest_data->cr2))
 			kill_guest(cpu, "Writing cr2");
 		break;
 	case 7: /* We've intercepted a Device Not Available fault. */
-		/* If the Guest doesn't want to know, we already restored the
-		 * Floating Point Unit, so we just continue without telling
-		 * it. */
+		/*
+		 * If the Guest doesn't want to know, we already restored the
+		 * Floating Point Unit, so we just continue without telling it.
+		 */
 		if (!cpu->ts)
 			return;
 		break;
 	case 32 ... 255:
-		/* These values mean a real interrupt occurred, in which case
+		/*
+		 * These values mean a real interrupt occurred, in which case
 		 * the Host handler has already been run. We just do a
 		 * friendly check if another process should now be run, then
-		 * return to run the Guest again */
+		 * return to run the Guest again
+		 */
 		cond_resched();
 		return;
 	case LGUEST_TRAP_ENTRY:
-		/* Our 'struct hcall_args' maps directly over our regs: we set
-		 * up the pointer now to indicate a hypercall is pending. */
+		/*
+		 * Our 'struct hcall_args' maps directly over our regs: we set
+		 * up the pointer now to indicate a hypercall is pending.
+		 */
 		cpu->hcall = (struct hcall_args *)cpu->regs;
 		return;
 	}
 
 	/* We didn't handle the trap, so it needs to go to the Guest. */
 	if (!deliver_trap(cpu, cpu->regs->trapnum))
-		/* If the Guest doesn't have a handler (either it hasn't
+		/*
+		 * If the Guest doesn't have a handler (either it hasn't
 		 * registered any yet, or it's one of the faults we don't let
-		 * it handle), it dies with this cryptic error message. */
+		 * it handle), it dies with this cryptic error message.
+		 */
 		kill_guest(cpu, "unhandled trap %li at %#lx (%#lx)",
 			   cpu->regs->trapnum, cpu->regs->eip,
 			   cpu->regs->trapnum == 14 ? cpu->arch.last_pagefault
 			   : cpu->regs->errcode);
 }
 
-/* Now we can look at each of the routines this calls, in increasing order of
+/*
+ * Now we can look at each of the routines this calls, in increasing order of
  * complexity: do_hypercalls(), emulate_insn(), maybe_do_interrupt(),
  * deliver_trap() and demand_page().  After all those, we'll be ready to
  * examine the Switcher, and our philosophical understanding of the Host/Guest
- * duality will be complete. :*/
+ * duality will be complete.
+:*/
 static void adjust_pge(void *on)
 {
 	if (on)
@@ -439,13 +515,16 @@ static void adjust_pge(void *on)
 		write_cr4(read_cr4() & ~X86_CR4_PGE);
 }
 
-/*H:020 Now the Switcher is mapped and every thing else is ready, we need to do
- * some more i386-specific initialization. */
+/*H:020
+ * Now the Switcher is mapped and every thing else is ready, we need to do
+ * some more i386-specific initialization.
+ */
 void __init lguest_arch_host_init(void)
 {
 	int i;
 
-	/* Most of the i386/switcher.S doesn't care that it's been moved; on
+	/*
+	 * Most of the i386/switcher.S doesn't care that it's been moved; on
 	 * Intel, jumps are relative, and it doesn't access any references to
 	 * external code or data.
 	 *
@@ -453,7 +532,8 @@ void __init lguest_arch_host_init(void)
 	 * addresses are placed in a table (default_idt_entries), so we need to
 	 * update the table with the new addresses.  switcher_offset() is a
 	 * convenience function which returns the distance between the
-	 * compiled-in switcher code and the high-mapped copy we just made. */
+	 * compiled-in switcher code and the high-mapped copy we just made.
+	 */
 	for (i = 0; i < IDT_ENTRIES; i++)
 		default_idt_entries[i] += switcher_offset();
 
@@ -468,63 +548,81 @@ void __init lguest_arch_host_init(void)
 	for_each_possible_cpu(i) {
 		/* lguest_pages() returns this CPU's two pages. */
 		struct lguest_pages *pages = lguest_pages(i);
-		/* This is a convenience pointer to make the code fit one
-		 * statement to a line. */
+		/* This is a convenience pointer to make the code neater. */
 		struct lguest_ro_state *state = &pages->state;
 
-		/* The Global Descriptor Table: the Host has a different one
+		/*
+		 * The Global Descriptor Table: the Host has a different one
 		 * for each CPU.  We keep a descriptor for the GDT which says
 		 * where it is and how big it is (the size is actually the last
-		 * byte, not the size, hence the "-1"). */
+		 * byte, not the size, hence the "-1").
+		 */
 		state->host_gdt_desc.size = GDT_SIZE-1;
 		state->host_gdt_desc.address = (long)get_cpu_gdt_table(i);
 
-		/* All CPUs on the Host use the same Interrupt Descriptor
+		/*
+		 * All CPUs on the Host use the same Interrupt Descriptor
 		 * Table, so we just use store_idt(), which gets this CPU's IDT
-		 * descriptor. */
+		 * descriptor.
+		 */
 		store_idt(&state->host_idt_desc);
 
-		/* The descriptors for the Guest's GDT and IDT can be filled
+		/*
+		 * The descriptors for the Guest's GDT and IDT can be filled
 		 * out now, too.  We copy the GDT & IDT into ->guest_gdt and
-		 * ->guest_idt before actually running the Guest. */
+		 * ->guest_idt before actually running the Guest.
+		 */
 		state->guest_idt_desc.size = sizeof(state->guest_idt)-1;
 		state->guest_idt_desc.address = (long)&state->guest_idt;
 		state->guest_gdt_desc.size = sizeof(state->guest_gdt)-1;
 		state->guest_gdt_desc.address = (long)&state->guest_gdt;
 
-		/* We know where we want the stack to be when the Guest enters
+		/*
+		 * We know where we want the stack to be when the Guest enters
 		 * the Switcher: in pages->regs.  The stack grows upwards, so
-		 * we start it at the end of that structure. */
+		 * we start it at the end of that structure.
+		 */
 		state->guest_tss.sp0 = (long)(&pages->regs + 1);
-		/* And this is the GDT entry to use for the stack: we keep a
-		 * couple of special LGUEST entries. */
+		/*
+		 * And this is the GDT entry to use for the stack: we keep a
+		 * couple of special LGUEST entries.
+		 */
 		state->guest_tss.ss0 = LGUEST_DS;
 
-		/* x86 can have a finegrained bitmap which indicates what I/O
+		/*
+		 * x86 can have a finegrained bitmap which indicates what I/O
 		 * ports the process can use.  We set it to the end of our
-		 * structure, meaning "none". */
+		 * structure, meaning "none".
+		 */
 		state->guest_tss.io_bitmap_base = sizeof(state->guest_tss);
 
-		/* Some GDT entries are the same across all Guests, so we can
-		 * set them up now. */
+		/*
+		 * Some GDT entries are the same across all Guests, so we can
+		 * set them up now.
+		 */
 		setup_default_gdt_entries(state);
 		/* Most IDT entries are the same for all Guests, too.*/
 		setup_default_idt_entries(state, default_idt_entries);
 
-		/* The Host needs to be able to use the LGUEST segments on this
-		 * CPU, too, so put them in the Host GDT. */
+		/*
+		 * The Host needs to be able to use the LGUEST segments on this
+		 * CPU, too, so put them in the Host GDT.
+		 */
 		get_cpu_gdt_table(i)[GDT_ENTRY_LGUEST_CS] = FULL_EXEC_SEGMENT;
 		get_cpu_gdt_table(i)[GDT_ENTRY_LGUEST_DS] = FULL_SEGMENT;
 	}
 
-	/* In the Switcher, we want the %cs segment register to use the
+	/*
+	 * In the Switcher, we want the %cs segment register to use the
 	 * LGUEST_CS GDT entry: we've put that in the Host and Guest GDTs, so
 	 * it will be undisturbed when we switch.  To change %cs and jump we
-	 * need this structure to feed to Intel's "lcall" instruction. */
+	 * need this structure to feed to Intel's "lcall" instruction.
+	 */
 	lguest_entry.offset = (long)switch_to_guest + switcher_offset();
 	lguest_entry.segment = LGUEST_CS;
 
-	/* Finally, we need to turn off "Page Global Enable".  PGE is an
+	/*
+	 * Finally, we need to turn off "Page Global Enable".  PGE is an
 	 * optimization where page table entries are specially marked to show
 	 * they never change.  The Host kernel marks all the kernel pages this
 	 * way because it's always present, even when userspace is running.
@@ -534,16 +632,21 @@ void __init lguest_arch_host_init(void)
 	 * you'll get really weird bugs that you'll chase for two days.
 	 *
 	 * I used to turn PGE off every time we switched to the Guest and back
-	 * on when we return, but that slowed the Switcher down noticibly. */
+	 * on when we return, but that slowed the Switcher down noticibly.
+	 */
 
-	/* We don't need the complexity of CPUs coming and going while we're
-	 * doing this. */
+	/*
+	 * We don't need the complexity of CPUs coming and going while we're
+	 * doing this.
+	 */
 	get_online_cpus();
 	if (cpu_has_pge) { /* We have a broader idea of "global". */
 		/* Remember that this was originally set (for cleanup). */
 		cpu_had_pge = 1;
-		/* adjust_pge is a helper function which sets or unsets the PGE
-		 * bit on its CPU, depending on the argument (0 == unset). */
+		/*
+		 * adjust_pge is a helper function which sets or unsets the PGE
+		 * bit on its CPU, depending on the argument (0 == unset).
+		 */
 		on_each_cpu(adjust_pge, (void *)0, 1);
 		/* Turn off the feature in the global feature set. */
 		clear_cpu_cap(&boot_cpu_data, X86_FEATURE_PGE);
@@ -590,26 +693,32 @@ int lguest_arch_init_hypercalls(struct lg_cpu *cpu)
 {
 	u32 tsc_speed;
 
-	/* The pointer to the Guest's "struct lguest_data" is the only argument.
-	 * We check that address now. */
+	/*
+	 * The pointer to the Guest's "struct lguest_data" is the only argument.
+	 * We check that address now.
+	 */
 	if (!lguest_address_ok(cpu->lg, cpu->hcall->arg1,
 			       sizeof(*cpu->lg->lguest_data)))
 		return -EFAULT;
 
-	/* Having checked it, we simply set lg->lguest_data to point straight
+	/*
+	 * Having checked it, we simply set lg->lguest_data to point straight
 	 * into the Launcher's memory at the right place and then use
 	 * copy_to_user/from_user from now on, instead of lgread/write.  I put
 	 * this in to show that I'm not immune to writing stupid
-	 * optimizations. */
+	 * optimizations.
+	 */
 	cpu->lg->lguest_data = cpu->lg->mem_base + cpu->hcall->arg1;
 
-	/* We insist that the Time Stamp Counter exist and doesn't change with
+	/*
+	 * We insist that the Time Stamp Counter exist and doesn't change with
 	 * cpu frequency.  Some devious chip manufacturers decided that TSC
 	 * changes could be handled in software.  I decided that time going
 	 * backwards might be good for benchmarks, but it's bad for users.
 	 *
 	 * We also insist that the TSC be stable: the kernel detects unreliable
-	 * TSCs for its own purposes, and we use that here. */
+	 * TSCs for its own purposes, and we use that here.
+	 */
 	if (boot_cpu_has(X86_FEATURE_CONSTANT_TSC) && !check_tsc_unstable())
 		tsc_speed = tsc_khz;
 	else
@@ -625,38 +734,47 @@ int lguest_arch_init_hypercalls(struct lg_cpu *cpu)
 }
 /*:*/
 
-/*L:030 lguest_arch_setup_regs()
+/*L:030
+ * lguest_arch_setup_regs()
  *
  * Most of the Guest's registers are left alone: we used get_zeroed_page() to
- * allocate the structure, so they will be 0. */
+ * allocate the structure, so they will be 0.
+ */
 void lguest_arch_setup_regs(struct lg_cpu *cpu, unsigned long start)
 {
 	struct lguest_regs *regs = cpu->regs;
 
-	/* There are four "segment" registers which the Guest needs to boot:
+	/*
+	 * There are four "segment" registers which the Guest needs to boot:
 	 * The "code segment" register (cs) refers to the kernel code segment
 	 * __KERNEL_CS, and the "data", "extra" and "stack" segment registers
 	 * refer to the kernel data segment __KERNEL_DS.
 	 *
 	 * The privilege level is packed into the lower bits.  The Guest runs
-	 * at privilege level 1 (GUEST_PL).*/
+	 * at privilege level 1 (GUEST_PL).
+	 */
 	regs->ds = regs->es = regs->ss = __KERNEL_DS|GUEST_PL;
 	regs->cs = __KERNEL_CS|GUEST_PL;
 
-	/* The "eflags" register contains miscellaneous flags.  Bit 1 (0x002)
+	/*
+	 * The "eflags" register contains miscellaneous flags.  Bit 1 (0x002)
 	 * is supposed to always be "1".  Bit 9 (0x200) controls whether
 	 * interrupts are enabled.  We always leave interrupts enabled while
-	 * running the Guest. */
+	 * running the Guest.
+	 */
 	regs->eflags = X86_EFLAGS_IF | 0x2;
 
-	/* The "Extended Instruction Pointer" register says where the Guest is
-	 * running. */
+	/*
+	 * The "Extended Instruction Pointer" register says where the Guest is
+	 * running.
+	 */
 	regs->eip = start;
 
-	/* %esi points to our boot information, at physical address 0, so don't
-	 * touch it. */
+	/*
+	 * %esi points to our boot information, at physical address 0, so don't
+	 * touch it.
+	 */
 
-	/* There are a couple of GDT entries the Guest expects when first
-	 * booting. */
+	/* There are a couple of GDT entries the Guest expects at boot. */
 	setup_guest_gdt(cpu);
 }
diff --git a/drivers/lguest/x86/switcher_32.S b/drivers/lguest/x86/switcher_32.S
index 3fc1531..40634b0 100644
--- a/drivers/lguest/x86/switcher_32.S
+++ b/drivers/lguest/x86/switcher_32.S
@@ -1,12 +1,15 @@
-/*P:900 This is the Switcher: code which sits at 0xFFC00000 astride both the
- * Host and Guest to do the low-level Guest<->Host switch.  It is as simple as
- * it can be made, but it's naturally very specific to x86.
+/*P:900
+ * This is the Switcher: code which sits at 0xFFC00000 (or 0xFFE00000) astride
+ * both the Host and Guest to do the low-level Guest<->Host switch.  It is as
+ * simple as it can be made, but it's naturally very specific to x86.
  *
  * You have now completed Preparation.  If this has whet your appetite; if you
  * are feeling invigorated and refreshed then the next, more challenging stage
- * can be found in "make Guest". :*/
+ * can be found in "make Guest".
+ :*/
 
-/*M:012 Lguest is meant to be simple: my rule of thumb is that 1% more LOC must
+/*M:012
+ * Lguest is meant to be simple: my rule of thumb is that 1% more LOC must
  * gain at least 1% more performance.  Since neither LOC nor performance can be
  * measured beforehand, it generally means implementing a feature then deciding
  * if it's worth it.  And once it's implemented, who can say no?
@@ -31,11 +34,14 @@
  * Host (which is actually really easy).
  *
  * Two questions remain.  Would the performance gain outweigh the complexity?
- * And who would write the verse documenting it? :*/
+ * And who would write the verse documenting it?
+:*/
 
-/*M:011 Lguest64 handles NMI.  This gave me NMI envy (until I looked at their
+/*M:011
+ * Lguest64 handles NMI.  This gave me NMI envy (until I looked at their
  * code).  It's worth doing though, since it would let us use oprofile in the
- * Host when a Guest is running. :*/
+ * Host when a Guest is running.
+:*/
 
 /*S:100
  * Welcome to the Switcher itself!
diff --git a/drivers/md/dm-crypt.c b/drivers/md/dm-crypt.c
index 529e2ba..ed10381 100644
--- a/drivers/md/dm-crypt.c
+++ b/drivers/md/dm-crypt.c
@@ -1318,7 +1318,7 @@ static int crypt_iterate_devices(struct dm_target *ti,
 {
 	struct crypt_config *cc = ti->private;
 
-	return fn(ti, cc->dev, cc->start, data);
+	return fn(ti, cc->dev, cc->start, ti->len, data);
 }
 
 static struct target_type crypt_target = {
diff --git a/drivers/md/dm-delay.c b/drivers/md/dm-delay.c
index 4e5b843..ebe7381 100644
--- a/drivers/md/dm-delay.c
+++ b/drivers/md/dm-delay.c
@@ -324,12 +324,12 @@ static int delay_iterate_devices(struct dm_target *ti,
 	struct delay_c *dc = ti->private;
 	int ret = 0;
 
-	ret = fn(ti, dc->dev_read, dc->start_read, data);
+	ret = fn(ti, dc->dev_read, dc->start_read, ti->len, data);
 	if (ret)
 		goto out;
 
 	if (dc->dev_write)
-		ret = fn(ti, dc->dev_write, dc->start_write, data);
+		ret = fn(ti, dc->dev_write, dc->start_write, ti->len, data);
 
 out:
 	return ret;
diff --git a/drivers/md/dm-linear.c b/drivers/md/dm-linear.c
index 9184b6de..82f7d6e 100644
--- a/drivers/md/dm-linear.c
+++ b/drivers/md/dm-linear.c
@@ -139,7 +139,7 @@ static int linear_iterate_devices(struct dm_target *ti,
 {
 	struct linear_c *lc = ti->private;
 
-	return fn(ti, lc->dev, lc->start, data);
+	return fn(ti, lc->dev, lc->start, ti->len, data);
 }
 
 static struct target_type linear_target = {
diff --git a/drivers/md/dm-mpath.c b/drivers/md/dm-mpath.c
index c70604a..6f0d90d 100644
--- a/drivers/md/dm-mpath.c
+++ b/drivers/md/dm-mpath.c
@@ -1453,7 +1453,7 @@ static int multipath_iterate_devices(struct dm_target *ti,
 
 	list_for_each_entry(pg, &m->priority_groups, list) {
 		list_for_each_entry(p, &pg->pgpaths, list) {
-			ret = fn(ti, p->path.dev, ti->begin, data);
+			ret = fn(ti, p->path.dev, ti->begin, ti->len, data);
 			if (ret)
 				goto out;
 		}
diff --git a/drivers/md/dm-raid1.c b/drivers/md/dm-raid1.c
index ce8868c..9726577 100644
--- a/drivers/md/dm-raid1.c
+++ b/drivers/md/dm-raid1.c
@@ -638,6 +638,7 @@ static void do_writes(struct mirror_set *ms, struct bio_list *writes)
 		spin_lock_irq(&ms->lock);
 		bio_list_merge(&ms->writes, &requeue);
 		spin_unlock_irq(&ms->lock);
+		delayed_wake(ms);
 	}
 
 	/*
@@ -1292,7 +1293,7 @@ static int mirror_iterate_devices(struct dm_target *ti,
 
 	for (i = 0; !ret && i < ms->nr_mirrors; i++)
 		ret = fn(ti, ms->mirror[i].dev,
-			 ms->mirror[i].offset, data);
+			 ms->mirror[i].offset, ti->len, data);
 
 	return ret;
 }
diff --git a/drivers/md/dm-stripe.c b/drivers/md/dm-stripe.c
index b240e85..4e0e593 100644
--- a/drivers/md/dm-stripe.c
+++ b/drivers/md/dm-stripe.c
@@ -320,10 +320,11 @@ static int stripe_iterate_devices(struct dm_target *ti,
 	int ret = 0;
 	unsigned i = 0;
 
-	do
+	do {
 		ret = fn(ti, sc->stripe[i].dev,
-			 sc->stripe[i].physical_start, data);
-	while (!ret && ++i < sc->stripes);
+			 sc->stripe[i].physical_start,
+			 sc->stripe_width, data);
+	} while (!ret && ++i < sc->stripes);
 
 	return ret;
 }
diff --git a/drivers/md/dm-table.c b/drivers/md/dm-table.c
index 2cba557..d952b34 100644
--- a/drivers/md/dm-table.c
+++ b/drivers/md/dm-table.c
@@ -346,7 +346,7 @@ static void close_dev(struct dm_dev_internal *d, struct mapped_device *md)
  * If possible, this checks an area of a destination device is valid.
  */
 static int device_area_is_valid(struct dm_target *ti, struct dm_dev *dev,
-				sector_t start, void *data)
+				sector_t start, sector_t len, void *data)
 {
 	struct queue_limits *limits = data;
 	struct block_device *bdev = dev->bdev;
@@ -359,7 +359,7 @@ static int device_area_is_valid(struct dm_target *ti, struct dm_dev *dev,
 	if (!dev_size)
 		return 1;
 
-	if ((start >= dev_size) || (start + ti->len > dev_size)) {
+	if ((start >= dev_size) || (start + len > dev_size)) {
 		DMWARN("%s: %s too small for target",
 		       dm_device_name(ti->table->md), bdevname(bdev, b));
 		return 0;
@@ -377,11 +377,11 @@ static int device_area_is_valid(struct dm_target *ti, struct dm_dev *dev,
 		return 0;
 	}
 
-	if (ti->len & (logical_block_size_sectors - 1)) {
+	if (len & (logical_block_size_sectors - 1)) {
 		DMWARN("%s: len=%llu not aligned to h/w "
 		       "logical block size %hu of %s",
 		       dm_device_name(ti->table->md),
-		       (unsigned long long)ti->len,
+		       (unsigned long long)len,
 		       limits->logical_block_size, bdevname(bdev, b));
 		return 0;
 	}
@@ -482,7 +482,7 @@ static int __table_get_device(struct dm_table *t, struct dm_target *ti,
 #define min_not_zero(l, r) (l == 0) ? r : ((r == 0) ? l : min(l, r))
 
 int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev,
-			 sector_t start, void *data)
+			 sector_t start, sector_t len, void *data)
 {
 	struct queue_limits *limits = data;
 	struct block_device *bdev = dev->bdev;
@@ -830,11 +830,6 @@ unsigned dm_table_get_type(struct dm_table *t)
 	return t->type;
 }
 
-bool dm_table_bio_based(struct dm_table *t)
-{
-	return dm_table_get_type(t) == DM_TYPE_BIO_BASED;
-}
-
 bool dm_table_request_based(struct dm_table *t)
 {
 	return dm_table_get_type(t) == DM_TYPE_REQUEST_BASED;
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index 9acd54a..8a311ea 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -2203,16 +2203,6 @@ int dm_swap_table(struct mapped_device *md, struct dm_table *table)
 		goto out;
 	}
 
-	/*
-	 * It is enought that blk_queue_ordered() is called only once when
-	 * the first bio-based table is bound.
-	 *
-	 * This setting should be moved to alloc_dev() when request-based dm
-	 * supports barrier.
-	 */
-	if (!md->map && dm_table_bio_based(table))
-		blk_queue_ordered(md->queue, QUEUE_ORDERED_DRAIN, NULL);
-
 	__unbind(md);
 	r = __bind(md, table, &limits);
 
diff --git a/drivers/md/dm.h b/drivers/md/dm.h
index 23278ae..a7663eb 100644
--- a/drivers/md/dm.h
+++ b/drivers/md/dm.h
@@ -61,7 +61,6 @@ int dm_table_any_congested(struct dm_table *t, int bdi_bits);
 int dm_table_any_busy_target(struct dm_table *t);
 int dm_table_set_type(struct dm_table *t);
 unsigned dm_table_get_type(struct dm_table *t);
-bool dm_table_bio_based(struct dm_table *t);
 bool dm_table_request_based(struct dm_table *t);
 int dm_table_alloc_md_mempools(struct dm_table *t);
 void dm_table_free_md_mempools(struct dm_table *t);
diff --git a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
index efb4a6c..9a6307a 100644
--- a/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
+++ b/drivers/media/dvb/b2c2/flexcop-fe-tuner.c
@@ -20,8 +20,14 @@
 #include "tuner-simple.h"
 #include "stv0297.h"
 
+
+/* Can we use the specified front-end?  Remember that if we are compiled
+ * into the kernel we can't call code that's in modules.  */
+#define FE_SUPPORTED(fe) (defined(CONFIG_DVB_##fe) || \
+	(defined(CONFIG_DVB_##fe##_MODULE) && defined(MODULE)))
+
 /* lnb control */
-#if defined(CONFIG_DVB_MT312_MODULE) || defined(CONFIG_DVB_STV0299_MODULE)
+#if FE_SUPPORTED(MT312) || FE_SUPPORTED(STV0299)
 static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
 {
 	struct flexcop_device *fc = fe->dvb->priv;
@@ -49,8 +55,7 @@ static int flexcop_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage
 }
 #endif
 
-#if defined(CONFIG_DVB_S5H1420_MODULE) || defined(CONFIG_DVB_STV0299_MODULE) \
-	|| defined(CONFIG_DVB_MT312_MODULE)
+#if FE_SUPPORTED(S5H1420) || FE_SUPPORTED(STV0299) || FE_SUPPORTED(MT312)
 static int flexcop_sleep(struct dvb_frontend* fe)
 {
 	struct flexcop_device *fc = fe->dvb->priv;
@@ -61,7 +66,7 @@ static int flexcop_sleep(struct dvb_frontend* fe)
 #endif
 
 /* SkyStar2 DVB-S rev 2.3 */
-#if defined(CONFIG_DVB_MT312_MODULE)
+#if FE_SUPPORTED(MT312)
 static int flexcop_set_tone(struct dvb_frontend *fe, fe_sec_tone_mode_t tone)
 {
 /* u16 wz_half_period_for_45_mhz[] = { 0x01ff, 0x0154, 0x00ff, 0x00cc }; */
@@ -193,10 +198,12 @@ static int skystar2_rev23_attach(struct flexcop_device *fc,
 	}
 	return 0;
 }
+#else
+#define skystar2_rev23_attach NULL
 #endif
 
 /* SkyStar2 DVB-S rev 2.6 */
-#if defined(CONFIG_DVB_STV0299_MODULE)
+#if FE_SUPPORTED(STV0299)
 static int samsung_tbmu24112_set_symbol_rate(struct dvb_frontend *fe,
 	u32 srate, u32 ratio)
 {
@@ -321,10 +328,12 @@ static int skystar2_rev26_attach(struct flexcop_device *fc,
 	}
 	return 0;
 }
+#else
+#define skystar2_rev26_attach NULL
 #endif
 
 /* SkyStar2 DVB-S rev 2.7 */
-#if defined(CONFIG_DVB_S5H1420_MODULE)
+#if FE_SUPPORTED(S5H1420) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_ITD1000)
 static struct s5h1420_config skystar2_rev2_7_s5h1420_config = {
 	.demod_address = 0x53,
 	.invert = 1,
@@ -385,10 +394,12 @@ fail:
 	fc->fc_i2c_adap[0].no_base_addr = 0;
 	return 0;
 }
+#else
+#define skystar2_rev27_attach NULL
 #endif
 
 /* SkyStar2 rev 2.8 */
-#if defined(CONFIG_DVB_CX24123_MODULE)
+#if FE_SUPPORTED(CX24123) && FE_SUPPORTED(ISL6421) && FE_SUPPORTED(TUNER_CX24113)
 static struct cx24123_config skystar2_rev2_8_cx24123_config = {
 	.demod_address = 0x55,
 	.dont_use_pll = 1,
@@ -433,10 +444,12 @@ static int skystar2_rev28_attach(struct flexcop_device *fc,
 	 * IR-receiver (PIC16F818) - but the card has no input for that ??? */
 	return 1;
 }
+#else
+#define skystar2_rev28_attach NULL
 #endif
 
 /* AirStar DVB-T */
-#if defined(CONFIG_DVB_MT352_MODULE)
+#if FE_SUPPORTED(MT352)
 static int samsung_tdtc9251dh0_demod_init(struct dvb_frontend *fe)
 {
 	static u8 mt352_clock_config[] = { 0x89, 0x18, 0x2d };
@@ -495,10 +508,12 @@ static int airstar_dvbt_attach(struct flexcop_device *fc,
 	}
 	return 0;
 }
+#else
+#define airstar_dvbt_attach NULL
 #endif
 
 /* AirStar ATSC 1st generation */
-#if defined(CONFIG_DVB_BCM3510_MODULE)
+#if FE_SUPPORTED(BCM3510)
 static int flexcop_fe_request_firmware(struct dvb_frontend *fe,
 	const struct firmware **fw, char* name)
 {
@@ -517,10 +532,12 @@ static int airstar_atsc1_attach(struct flexcop_device *fc,
 	fc->fe = dvb_attach(bcm3510_attach, &air2pc_atsc_first_gen_config, i2c);
 	return fc->fe != NULL;
 }
+#else
+#define airstar_atsc1_attach NULL
 #endif
 
 /* AirStar ATSC 2nd generation */
-#if defined(CONFIG_DVB_NXT200X_MODULE)
+#if FE_SUPPORTED(NXT200X) && FE_SUPPORTED(PLL)
 static struct nxt200x_config samsung_tbmv_config = {
 	.demod_address = 0x0a,
 };
@@ -535,10 +552,12 @@ static int airstar_atsc2_attach(struct flexcop_device *fc,
 	return !!dvb_attach(dvb_pll_attach, fc->fe, 0x61, NULL,
 			    DVB_PLL_SAMSUNG_TBMV);
 }
+#else
+#define airstar_atsc2_attach NULL
 #endif
 
 /* AirStar ATSC 3rd generation */
-#if defined(CONFIG_DVB_LGDT330X_MODULE)
+#if FE_SUPPORTED(LGDT330X)
 static struct lgdt330x_config air2pc_atsc_hd5000_config = {
 	.demod_address       = 0x59,
 	.demod_chip          = LGDT3303,
@@ -556,10 +575,12 @@ static int airstar_atsc3_attach(struct flexcop_device *fc,
 	return !!dvb_attach(simple_tuner_attach, fc->fe, i2c, 0x61,
 			    TUNER_LG_TDVS_H06XF);
 }
+#else
+#define airstar_atsc3_attach NULL
 #endif
 
 /* CableStar2 DVB-C */
-#if defined(CONFIG_DVB_STV0297_MODULE)
+#if FE_SUPPORTED(STV0297)
 static int alps_tdee4_stv0297_tuner_set_params(struct dvb_frontend* fe,
 		struct dvb_frontend_parameters *fep)
 {
@@ -698,39 +719,23 @@ static int cablestar2_attach(struct flexcop_device *fc,
 	fc->fe->ops.tuner_ops.set_params = alps_tdee4_stv0297_tuner_set_params;
 	return 1;
 }
+#else
+#define cablestar2_attach NULL
 #endif
 
 static struct {
 	flexcop_device_type_t type;
 	int (*attach)(struct flexcop_device *, struct i2c_adapter *);
 } flexcop_frontends[] = {
-#if defined(CONFIG_DVB_S5H1420_MODULE)
 	{ FC_SKY_REV27, skystar2_rev27_attach },
-#endif
-#if defined(CONFIG_DVB_CX24123_MODULE)
 	{ FC_SKY_REV28, skystar2_rev28_attach },
-#endif
-#if defined(CONFIG_DVB_STV0299_MODULE)
 	{ FC_SKY_REV26, skystar2_rev26_attach },
-#endif
-#if defined(CONFIG_DVB_MT352_MODULE)
 	{ FC_AIR_DVBT, airstar_dvbt_attach },
-#endif
-#if defined(CONFIG_DVB_NXT200X_MODULE)
 	{ FC_AIR_ATSC2, airstar_atsc2_attach },
-#endif
-#if defined(CONFIG_DVB_LGDT330X_MODULE)
 	{ FC_AIR_ATSC3, airstar_atsc3_attach },
-#endif
-#if defined(CONFIG_DVB_BCM3510_MODULE)
 	{ FC_AIR_ATSC1, airstar_atsc1_attach },
-#endif
-#if defined(CONFIG_DVB_STV0297_MODULE)
 	{ FC_CABLE, cablestar2_attach },
-#endif
-#if defined(CONFIG_DVB_MT312_MODULE)
 	{ FC_SKY_REV23, skystar2_rev23_attach },
-#endif
 };
 
 /* try to figure out the frontend */
@@ -738,6 +743,8 @@ int flexcop_frontend_init(struct flexcop_device *fc)
 {
 	int i;
 	for (i = 0; i < ARRAY_SIZE(flexcop_frontends); i++) {
+		if (!flexcop_frontends[i].attach)
+			continue;
 		/* type needs to be set before, because of some workarounds
 		 * done based on the probed card type */
 		fc->dev_type = flexcop_frontends[i].type;
diff --git a/drivers/media/dvb/frontends/af9013.c b/drivers/media/dvb/frontends/af9013.c
index 136c586..12e018b 100644
--- a/drivers/media/dvb/frontends/af9013.c
+++ b/drivers/media/dvb/frontends/af9013.c
@@ -527,6 +527,10 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
 	u8 i, buf[3] = {0, 0, 0};
 	*auto_mode = 0; /* set if parameters are requested to auto set */
 
+	/* Try auto-detect transmission parameters in case of AUTO requested or
+	   garbage parameters given by application for compatibility.
+	   MPlayer seems to provide garbage parameters currently. */
+
 	switch (params->transmission_mode) {
 	case TRANSMISSION_MODE_AUTO:
 		*auto_mode = 1;
@@ -536,7 +540,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
 		buf[0] |= (1 << 0);
 		break;
 	default:
-		return -EINVAL;
+		deb_info("%s: invalid transmission_mode\n", __func__);
+		*auto_mode = 1;
 	}
 
 	switch (params->guard_interval) {
@@ -554,7 +559,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
 		buf[0] |= (3 << 2);
 		break;
 	default:
-		return -EINVAL;
+		deb_info("%s: invalid guard_interval\n", __func__);
+		*auto_mode = 1;
 	}
 
 	switch (params->hierarchy_information) {
@@ -572,7 +578,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
 		buf[0] |= (3 << 4);
 		break;
 	default:
-		return -EINVAL;
+		deb_info("%s: invalid hierarchy_information\n", __func__);
+		*auto_mode = 1;
 	};
 
 	switch (params->constellation) {
@@ -587,7 +594,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
 		buf[1] |= (2 << 6);
 		break;
 	default:
-		return -EINVAL;
+		deb_info("%s: invalid constellation\n", __func__);
+		*auto_mode = 1;
 	}
 
 	/* Use HP. How and which case we can switch to LP? */
@@ -611,7 +619,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
 		buf[2] |= (4 << 0);
 		break;
 	default:
-		return -EINVAL;
+		deb_info("%s: invalid code_rate_HP\n", __func__);
+		*auto_mode = 1;
 	}
 
 	switch (params->code_rate_LP) {
@@ -638,7 +647,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
 		if (params->hierarchy_information == HIERARCHY_AUTO)
 			break;
 	default:
-		return -EINVAL;
+		deb_info("%s: invalid code_rate_LP\n", __func__);
+		*auto_mode = 1;
 	}
 
 	switch (params->bandwidth) {
@@ -651,7 +661,8 @@ static int af9013_set_ofdm_params(struct af9013_state *state,
 		buf[1] |= (2 << 2);
 		break;
 	default:
-		return -EINVAL;
+		deb_info("%s: invalid bandwidth\n", __func__);
+		buf[1] |= (2 << 2); /* cannot auto-detect BW, try 8 MHz */
 	}
 
 	/* program */
diff --git a/drivers/media/video/bt8xx/bttv-cards.c b/drivers/media/video/bt8xx/bttv-cards.c
index fdb4adf..ca6558c 100644
--- a/drivers/media/video/bt8xx/bttv-cards.c
+++ b/drivers/media/video/bt8xx/bttv-cards.c
@@ -3324,8 +3324,6 @@ void __devinit bttv_init_card1(struct bttv *btv)
 /* initialization part two -- after registering i2c bus */
 void __devinit bttv_init_card2(struct bttv *btv)
 {
-	int addr=ADDR_UNSET;
-
 	btv->tuner_type = UNSET;
 
 	if (BTTV_BOARD_UNKNOWN == btv->c.type) {
@@ -3470,9 +3468,6 @@ void __devinit bttv_init_card2(struct bttv *btv)
 	btv->pll.pll_current = -1;
 
 	/* tuner configuration (from card list / autodetect / insmod option) */
-	if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
-		addr = bttv_tvcards[btv->c.type].tuner_addr;
-
 	if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
 		if (UNSET == btv->tuner_type)
 			btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
@@ -3496,40 +3491,6 @@ void __devinit bttv_init_card2(struct bttv *btv)
 	if (UNSET == btv->tuner_type)
 		btv->tuner_type = TUNER_ABSENT;
 
-	if (btv->tuner_type != TUNER_ABSENT) {
-		struct tuner_setup tun_setup;
-
-		/* Load tuner module before issuing tuner config call! */
-		if (bttv_tvcards[btv->c.type].has_radio)
-			v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-				&btv->c.i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(ADDRS_RADIO));
-		v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-				&btv->c.i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
-		v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
-				&btv->c.i2c_adap, "tuner", "tuner",
-				v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
-
-		tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
-		tun_setup.type = btv->tuner_type;
-		tun_setup.addr = addr;
-
-		if (bttv_tvcards[btv->c.type].has_radio)
-			tun_setup.mode_mask |= T_RADIO;
-
-		bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
-	}
-
-	if (btv->tda9887_conf) {
-		struct v4l2_priv_tun_config tda9887_cfg;
-
-		tda9887_cfg.tuner = TUNER_TDA9887;
-		tda9887_cfg.priv = &btv->tda9887_conf;
-
-		bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
-	}
-
 	btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
 		   bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
 	btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
@@ -3540,15 +3501,15 @@ void __devinit bttv_init_card2(struct bttv *btv)
 		btv->has_remote = remote[btv->c.nr];
 
 	if (bttv_tvcards[btv->c.type].has_radio)
-		btv->has_radio=1;
+		btv->has_radio = 1;
 	if (bttv_tvcards[btv->c.type].has_remote)
-		btv->has_remote=1;
+		btv->has_remote = 1;
 	if (!bttv_tvcards[btv->c.type].no_gpioirq)
-		btv->gpioirq=1;
+		btv->gpioirq = 1;
 	if (bttv_tvcards[btv->c.type].volume_gpio)
-		btv->volume_gpio=bttv_tvcards[btv->c.type].volume_gpio;
+		btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio;
 	if (bttv_tvcards[btv->c.type].audio_mode_gpio)
-		btv->audio_mode_gpio=bttv_tvcards[btv->c.type].audio_mode_gpio;
+		btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio;
 
 	if (btv->tuner_type == TUNER_ABSENT)
 		return;  /* no tuner or related drivers to load */
@@ -3666,6 +3627,49 @@ no_audio:
 }
 
 
+/* initialize the tuner */
+void __devinit bttv_init_tuner(struct bttv *btv)
+{
+	int addr = ADDR_UNSET;
+
+	if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
+		addr = bttv_tvcards[btv->c.type].tuner_addr;
+
+	if (btv->tuner_type != TUNER_ABSENT) {
+		struct tuner_setup tun_setup;
+
+		/* Load tuner module before issuing tuner config call! */
+		if (bttv_tvcards[btv->c.type].has_radio)
+			v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+				&btv->c.i2c_adap, "tuner", "tuner",
+				v4l2_i2c_tuner_addrs(ADDRS_RADIO));
+		v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+				&btv->c.i2c_adap, "tuner", "tuner",
+				v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
+		v4l2_i2c_new_probed_subdev(&btv->c.v4l2_dev,
+				&btv->c.i2c_adap, "tuner", "tuner",
+				v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
+
+		tun_setup.mode_mask = T_ANALOG_TV | T_DIGITAL_TV;
+		tun_setup.type = btv->tuner_type;
+		tun_setup.addr = addr;
+
+		if (bttv_tvcards[btv->c.type].has_radio)
+			tun_setup.mode_mask |= T_RADIO;
+
+		bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
+	}
+
+	if (btv->tda9887_conf) {
+		struct v4l2_priv_tun_config tda9887_cfg;
+
+		tda9887_cfg.tuner = TUNER_TDA9887;
+		tda9887_cfg.priv = &btv->tda9887_conf;
+
+		bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
+	}
+}
+
 /* ----------------------------------------------------------------------- */
 
 static void modtec_eeprom(struct bttv *btv)
diff --git a/drivers/media/video/bt8xx/bttv-driver.c b/drivers/media/video/bt8xx/bttv-driver.c
index d147d29..8cc6dd2 100644
--- a/drivers/media/video/bt8xx/bttv-driver.c
+++ b/drivers/media/video/bt8xx/bttv-driver.c
@@ -4419,6 +4419,7 @@ static int __devinit bttv_probe(struct pci_dev *dev,
 
 	/* some card-specific stuff (needs working i2c) */
 	bttv_init_card2(btv);
+	bttv_init_tuner(btv);
 	init_irqreg(btv);
 
 	/* register video4linux + input */
diff --git a/drivers/media/video/bt8xx/bttv.h b/drivers/media/video/bt8xx/bttv.h
index 3d36daf..3ec2402 100644
--- a/drivers/media/video/bt8xx/bttv.h
+++ b/drivers/media/video/bt8xx/bttv.h
@@ -283,6 +283,7 @@ extern struct tvcard bttv_tvcards[];
 extern void bttv_idcard(struct bttv *btv);
 extern void bttv_init_card1(struct bttv *btv);
 extern void bttv_init_card2(struct bttv *btv);
+extern void bttv_init_tuner(struct bttv *btv);
 
 /* card-specific funtions */
 extern void tea5757_set_freq(struct bttv *btv, unsigned short freq);
diff --git a/drivers/media/video/cx23885/cx23885-417.c b/drivers/media/video/cx23885/cx23885-417.c
index 428f0c4..e0cf21e 100644
--- a/drivers/media/video/cx23885/cx23885-417.c
+++ b/drivers/media/video/cx23885/cx23885-417.c
@@ -58,7 +58,8 @@ MODULE_PARM_DESC(v4l_debug, "enable V4L debug messages");
 
 #define dprintk(level, fmt, arg...)\
 	do { if (v4l_debug >= level) \
-		printk(KERN_DEBUG "%s: " fmt, dev->name , ## arg);\
+		printk(KERN_DEBUG "%s: " fmt, \
+		(dev) ? dev->name : "cx23885[?]", ## arg); \
 	} while (0)
 
 static struct cx23885_tvnorm cx23885_tvnorms[] = {
@@ -1677,6 +1678,7 @@ static struct v4l2_file_operations mpeg_fops = {
 	.read	       = mpeg_read,
 	.poll          = mpeg_poll,
 	.mmap	       = mpeg_mmap,
+	.ioctl	       = video_ioctl2,
 };
 
 static const struct v4l2_ioctl_ops mpeg_ioctl_ops = {
diff --git a/drivers/media/video/em28xx/em28xx-cards.c b/drivers/media/video/em28xx/em28xx-cards.c
index ebd24a2..320f1f6 100644
--- a/drivers/media/video/em28xx/em28xx-cards.c
+++ b/drivers/media/video/em28xx/em28xx-cards.c
@@ -58,8 +58,6 @@ static unsigned int card[]     = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
 module_param_array(card,  int, NULL, 0444);
 MODULE_PARM_DESC(card,     "card type");
 
-#define MT9V011_VERSION                 0x8243
-
 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS */
 static unsigned long em28xx_devused;
 
@@ -159,6 +157,20 @@ static struct em28xx_reg_seq evga_indtube_digital[] = {
 	{ -1,			-1,	-1,		-1},
 };
 
+/* Pinnacle Hybrid Pro eb1a:2881 */
+static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = {
+	{EM28XX_R08_GPIO,	0xfd,   ~EM_GPIO_4,	10},
+	{	-1,		-1,	-1,		-1},
+};
+
+static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = {
+	{EM28XX_R08_GPIO,	0x6e,	~EM_GPIO_4,	10},
+	{EM2880_R04_GPO,	0x04,	0xff,	       100},/* zl10353 reset */
+	{EM2880_R04_GPO,	0x0c,	0xff,		 1},
+	{	-1,		-1,	-1,		-1},
+};
+
+
 /* Callback for the most boards */
 static struct em28xx_reg_seq default_tuner_gpio[] = {
 	{EM28XX_R08_GPIO,	EM_GPIO_4,	EM_GPIO_4,	10},
@@ -205,13 +217,15 @@ static struct em28xx_reg_seq silvercrest_reg_seq[] = {
  */
 struct em28xx_board em28xx_boards[] = {
 	[EM2750_BOARD_UNKNOWN] = {
-		.name          = "Unknown EM2750/EM2751 webcam grabber",
+		.name          = "EM2710/EM2750/EM2751 webcam grabber",
 		.xclk          = EM28XX_XCLK_FREQUENCY_48MHZ,
-		.tuner_type    = TUNER_ABSENT,	/* This is a webcam */
+		.tuner_type    = TUNER_ABSENT,
+		.is_webcam     = 1,
 		.input         = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = 0,
 			.amux     = EM28XX_AMUX_VIDEO,
+			.gpio     = silvercrest_reg_seq,
 		} },
 	},
 	[EM2800_BOARD_UNKNOWN] = {
@@ -233,13 +247,15 @@ struct em28xx_board em28xx_boards[] = {
 	[EM2820_BOARD_UNKNOWN] = {
 		.name          = "Unknown EM2750/28xx video grabber",
 		.tuner_type    = TUNER_ABSENT,
+		.is_webcam     = 1,	/* To enable sensor probe */
 	},
 	[EM2750_BOARD_DLCW_130] = {
 		/* Beijing Huaqi Information Digital Technology Co., Ltd */
 		.name          = "Huaqi DLCW-130",
 		.valid         = EM28XX_BOARD_NOT_VALIDATED,
 		.xclk          = EM28XX_XCLK_FREQUENCY_48MHZ,
-		.tuner_type    = TUNER_ABSENT,	/* This is a webcam */
+		.tuner_type    = TUNER_ABSENT,
+		.is_webcam     = 1,
 		.input         = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = 0,
@@ -440,7 +456,8 @@ struct em28xx_board em28xx_boards[] = {
 	[EM2820_BOARD_VIDEOLOGY_20K14XUSB] = {
 		.name         = "Videology 20K14XUSB USB2.0",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.tuner_type   = TUNER_ABSENT,	/* This is a webcam */
+		.tuner_type   = TUNER_ABSENT,
+		.is_webcam    = 1,
 		.input        = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = 0,
@@ -450,8 +467,7 @@ struct em28xx_board em28xx_boards[] = {
 	[EM2820_BOARD_SILVERCREST_WEBCAM] = {
 		.name         = "Silvercrest Webcam 1.3mpix",
 		.tuner_type   = TUNER_ABSENT,
-		.is_27xx      = 1,
-		.decoder      = EM28XX_MT9V011,
+		.is_webcam    = 1,
 		.input        = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = 0,
@@ -500,7 +516,8 @@ struct em28xx_board em28xx_boards[] = {
 		/* Beijing Huaqi Information Digital Technology Co., Ltd */
 		.name         = "NetGMBH Cam",
 		.valid        = EM28XX_BOARD_NOT_VALIDATED,
-		.tuner_type   = TUNER_ABSENT,	/* This is a webcam */
+		.tuner_type   = TUNER_ABSENT,
+		.is_webcam    = 1,
 		.input        = { {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = 0,
@@ -1250,25 +1267,26 @@ struct em28xx_board em28xx_boards[] = {
 	},
 	[EM2881_BOARD_PINNACLE_HYBRID_PRO] = {
 		.name         = "Pinnacle Hybrid Pro",
-		.valid        = EM28XX_BOARD_NOT_VALIDATED,
 		.tuner_type   = TUNER_XC2028,
 		.tuner_gpio   = default_tuner_gpio,
 		.decoder      = EM28XX_TVP5150,
+		.has_dvb      = 1,
+		.dvb_gpio     = pinnacle_hybrid_pro_digital,
 		.input        = { {
 			.type     = EM28XX_VMUX_TELEVISION,
 			.vmux     = TVP5150_COMPOSITE0,
 			.amux     = EM28XX_AMUX_VIDEO,
-			.gpio     = default_analog,
+			.gpio     = pinnacle_hybrid_pro_analog,
 		}, {
 			.type     = EM28XX_VMUX_COMPOSITE1,
 			.vmux     = TVP5150_COMPOSITE1,
 			.amux     = EM28XX_AMUX_LINE_IN,
-			.gpio     = default_analog,
+			.gpio     = pinnacle_hybrid_pro_analog,
 		}, {
 			.type     = EM28XX_VMUX_SVIDEO,
 			.vmux     = TVP5150_SVIDEO,
 			.amux     = EM28XX_AMUX_LINE_IN,
-			.gpio     = default_analog,
+			.gpio     = pinnacle_hybrid_pro_analog,
 		} },
 	},
 	[EM2882_BOARD_PINNACLE_HYBRID_PRO] = {
@@ -1638,6 +1656,7 @@ static struct em28xx_hash_table em28xx_eeprom_hash[] = {
 	{0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028},
 	{0x9567eb1a, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028},
 	{0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028},
+	{0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028},
 };
 
 /* I2C devicelist hash table for devices with generic USB IDs */
@@ -1704,6 +1723,32 @@ static inline void em28xx_set_model(struct em28xx *dev)
 				       EM28XX_I2C_FREQ_100_KHZ;
 }
 
+/* FIXME: Should be replaced by a proper mt9m001 driver */
+static int em28xx_initialize_mt9m001(struct em28xx *dev)
+{
+	int i;
+	unsigned char regs[][3] = {
+		{ 0x0d, 0x00, 0x01, },
+		{ 0x0d, 0x00, 0x00, },
+		{ 0x04, 0x05, 0x00, },	/* hres = 1280 */
+		{ 0x03, 0x04, 0x00, },  /* vres = 1024 */
+		{ 0x20, 0x11, 0x00, },
+		{ 0x06, 0x00, 0x10, },
+		{ 0x2b, 0x00, 0x24, },
+		{ 0x2e, 0x00, 0x24, },
+		{ 0x35, 0x00, 0x24, },
+		{ 0x2d, 0x00, 0x20, },
+		{ 0x2c, 0x00, 0x20, },
+		{ 0x09, 0x0a, 0xd4, },
+		{ 0x35, 0x00, 0x57, },
+	};
+
+	for (i = 0; i < ARRAY_SIZE(regs); i++)
+		i2c_master_send(&dev->i2c_client, &regs[i][0], 3);
+
+	return 0;
+}
+
 /* HINT method: webcam I2C chips
  *
  * This method work for webcams with Micron sensors
@@ -1716,9 +1761,6 @@ static int em28xx_hint_sensor(struct em28xx *dev)
 	__be16 version_be;
 	u16 version;
 
-	if (dev->model != EM2820_BOARD_UNKNOWN)
-		return 0;
-
 	dev->i2c_client.addr = 0xba >> 1;
 	cmd = 0;
 	i2c_master_send(&dev->i2c_client, &cmd, 1);
@@ -1729,16 +1771,38 @@ static int em28xx_hint_sensor(struct em28xx *dev)
 	version = be16_to_cpu(version_be);
 
 	switch (version) {
-	case MT9V011_VERSION:
+	case 0x8243:		/* mt9v011 640x480 1.3 Mpix sensor */
 		dev->model = EM2820_BOARD_SILVERCREST_WEBCAM;
 		sensor_name = "mt9v011";
+		dev->em28xx_sensor = EM28XX_MT9V011;
+		dev->sensor_xres = 640;
+		dev->sensor_yres = 480;
+		dev->sensor_xtal = 6300000;
+
+		/* probably means GRGB 16 bit bayer */
+		dev->vinmode = 0x0d;
+		dev->vinctl = 0x00;
+
+		break;
+	case 0x8431:
+		dev->model = EM2750_BOARD_UNKNOWN;
+		sensor_name = "mt9m001";
+		dev->em28xx_sensor = EM28XX_MT9M001;
+		em28xx_initialize_mt9m001(dev);
+		dev->sensor_xres = 1280;
+		dev->sensor_yres = 1024;
+
+		/* probably means BGGR 16 bit bayer */
+		dev->vinmode = 0x0c;
+		dev->vinctl = 0x00;
+
 		break;
 	default:
-		printk("Unknown Sensor 0x%04x\n", be16_to_cpu(version));
+		printk("Unknown Micron Sensor 0x%04x\n", be16_to_cpu(version));
 		return -EINVAL;
 	}
 
-	em28xx_errdev("Sensor is %s, assuming that webcam is %s\n",
+	em28xx_errdev("Sensor is %s, using model %s entry.\n",
 		      sensor_name, em28xx_boards[dev->model].name);
 
 	return 0;
@@ -1772,10 +1836,7 @@ void em28xx_pre_card_setup(struct em28xx *dev)
 			em28xx_info("chip ID is em2750\n");
 			break;
 		case CHIP_ID_EM2820:
-			if (dev->board.is_27xx)
-				em28xx_info("chip is em2710\n");
-			else
-				em28xx_info("chip ID is em2820\n");
+			em28xx_info("chip ID is em2710 or em2820\n");
 			break;
 		case CHIP_ID_EM2840:
 			em28xx_info("chip ID is em2840\n");
@@ -1929,6 +1990,7 @@ static void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl)
 		ctl->demod = XC3028_FE_ZARLINK456;
 		break;
 	case EM2880_BOARD_TERRATEC_HYBRID_XS:
+	case EM2881_BOARD_PINNACLE_HYBRID_PRO:
 		ctl->demod = XC3028_FE_ZARLINK456;
 		break;
 	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2:
@@ -2225,6 +2287,7 @@ void em28xx_card_setup(struct em28xx *dev)
 		   em28xx_set_mode() in em28xx_pre_card_setup() was a no-op,
 		   so make the call now so the analog GPIOs are set properly
 		   before probing the i2c bus. */
+		em28xx_gpio_set(dev, dev->board.tuner_gpio);
 		em28xx_set_mode(dev, EM28XX_ANALOG_MODE);
 		break;
 	case EM2820_BOARD_SILVERCREST_WEBCAM:
@@ -2262,9 +2325,14 @@ void em28xx_card_setup(struct em28xx *dev)
 		v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
 			"tvp5150", "tvp5150", tvp5150_addrs);
 
-	if (dev->board.decoder == EM28XX_MT9V011)
-		v4l2_i2c_new_probed_subdev(&dev->v4l2_dev, &dev->i2c_adap,
-			"mt9v011", "mt9v011", mt9v011_addrs);
+	if (dev->em28xx_sensor == EM28XX_MT9V011) {
+		struct v4l2_subdev *sd;
+
+		sd = v4l2_i2c_new_probed_subdev(&dev->v4l2_dev,
+			 &dev->i2c_adap, "mt9v011", "mt9v011", mt9v011_addrs);
+		v4l2_subdev_call(sd, core, s_config, 0, &dev->sensor_xtal);
+	}
+
 
 	if (dev->board.adecoder == EM28XX_TVAUDIO)
 		v4l2_i2c_new_subdev(&dev->v4l2_dev, &dev->i2c_adap,
@@ -2410,7 +2478,19 @@ static int em28xx_init_dev(struct em28xx **devhandle, struct usb_device *udev,
 		return errCode;
 	}
 
-	em28xx_hint_sensor(dev);
+	/*
+	 * Default format, used for tvp5150 or saa711x output formats
+	 */
+	dev->vinmode = 0x10;
+	dev->vinctl  = 0x11;
+
+	/*
+	 * If the device can be a webcam, seek for a sensor.
+	 * If sensor is not found, then it isn't a webcam.
+	 */
+	if (dev->board.is_webcam)
+		if (em28xx_hint_sensor(dev) < 0)
+			dev->board.is_webcam = 0;
 
 	/* Do board specific init and eeprom reading */
 	em28xx_card_setup(dev);
diff --git a/drivers/media/video/em28xx/em28xx-core.c b/drivers/media/video/em28xx/em28xx-core.c
index 079ab4d..5b78e19 100644
--- a/drivers/media/video/em28xx/em28xx-core.c
+++ b/drivers/media/video/em28xx/em28xx-core.c
@@ -648,28 +648,17 @@ int em28xx_capture_start(struct em28xx *dev, int start)
 int em28xx_set_outfmt(struct em28xx *dev)
 {
 	int ret;
-	int vinmode, vinctl, outfmt;
-
-	outfmt  = dev->format->reg;
-
-	if (dev->board.is_27xx) {
-		vinmode = 0x0d;
-		vinctl  = 0x00;
-	} else {
-		vinmode = 0x10;
-		vinctl  = 0x11;
-	}
 
 	ret = em28xx_write_reg_bits(dev, EM28XX_R27_OUTFMT,
-				outfmt | 0x20, 0xff);
+				dev->format->reg | 0x20, 0xff);
 	if (ret < 0)
 			return ret;
 
-	ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, vinmode);
+	ret = em28xx_write_reg(dev, EM28XX_R10_VINMODE, dev->vinmode);
 	if (ret < 0)
 		return ret;
 
-	return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, vinctl);
+	return em28xx_write_reg(dev, EM28XX_R11_VINCTRL, dev->vinctl);
 }
 
 static int em28xx_accumulator_set(struct em28xx *dev, u8 xmin, u8 xmax,
@@ -707,10 +696,7 @@ static int em28xx_scaler_set(struct em28xx *dev, u16 h, u16 v)
 	u8 mode;
 	/* the em2800 scaler only supports scaling down to 50% */
 
-	if (dev->board.is_27xx) {
-		/* FIXME: Don't use the scaler yet */
-		mode = 0;
-	} else if (dev->board.is_em2800) {
+	if (dev->board.is_em2800) {
 		mode = (v ? 0x20 : 0x00) | (h ? 0x10 : 0x00);
 	} else {
 		u8 buf[2];
diff --git a/drivers/media/video/em28xx/em28xx-dvb.c b/drivers/media/video/em28xx/em28xx-dvb.c
index 3da97c3..cf0ac7f 100644
--- a/drivers/media/video/em28xx/em28xx-dvb.c
+++ b/drivers/media/video/em28xx/em28xx-dvb.c
@@ -31,6 +31,8 @@
 #include "lgdt330x.h"
 #include "zl10353.h"
 #include "s5h1409.h"
+#include "mt352.h"
+#include "mt352_priv.h" /* FIXME */
 
 MODULE_DESCRIPTION("driver for em28xx based DVB cards");
 MODULE_AUTHOR("Mauro Carvalho Chehab <mchehab@infradead.org>");
@@ -243,7 +245,7 @@ static struct s5h1409_config em28xx_s5h1409_with_xc3028 = {
 	.mpeg_timing   = S5H1409_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK
 };
 
-static struct zl10353_config em28xx_terratec_xs_zl10353_xc3028 = {
+static struct zl10353_config em28xx_zl10353_xc3028_no_i2c_gate = {
 	.demod_address = (0x1e >> 1),
 	.no_tuner = 1,
 	.disable_i2c_gate_ctrl = 1,
@@ -258,6 +260,41 @@ static struct drx397xD_config em28xx_drx397xD_with_xc3028 = {
 };
 #endif
 
+static int mt352_terratec_xs_init(struct dvb_frontend *fe)
+{
+	/* Values extracted from a USB trace of the Terratec Windows driver */
+	static u8 clock_config[]   = { CLOCK_CTL,  0x38, 0x2c };
+	static u8 reset[]          = { RESET,      0x80 };
+	static u8 adc_ctl_1_cfg[]  = { ADC_CTL_1,  0x40 };
+	static u8 agc_cfg[]        = { AGC_TARGET, 0x28, 0xa0 };
+	static u8 input_freq_cfg[] = { INPUT_FREQ_1, 0x31, 0xb8 };
+	static u8 rs_err_cfg[]     = { RS_ERR_PER_1, 0x00, 0x4d };
+	static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 };
+	static u8 trl_nom_cfg[]    = { TRL_NOMINAL_RATE_1, 0x64, 0x00 };
+	static u8 tps_given_cfg[]  = { TPS_GIVEN_1, 0x40, 0x80, 0x50 };
+	static u8 tuner_go[]       = { TUNER_GO, 0x01};
+
+	mt352_write(fe, clock_config,   sizeof(clock_config));
+	udelay(200);
+	mt352_write(fe, reset,          sizeof(reset));
+	mt352_write(fe, adc_ctl_1_cfg,  sizeof(adc_ctl_1_cfg));
+	mt352_write(fe, agc_cfg,        sizeof(agc_cfg));
+	mt352_write(fe, input_freq_cfg, sizeof(input_freq_cfg));
+	mt352_write(fe, rs_err_cfg,     sizeof(rs_err_cfg));
+	mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg));
+	mt352_write(fe, trl_nom_cfg,    sizeof(trl_nom_cfg));
+	mt352_write(fe, tps_given_cfg,  sizeof(tps_given_cfg));
+	mt352_write(fe, tuner_go,       sizeof(tuner_go));
+	return 0;
+}
+
+static struct mt352_config terratec_xs_mt352_cfg = {
+	.demod_address = (0x1e >> 1),
+	.no_tuner = 1,
+	.if2 = 45600,
+	.demod_init = mt352_terratec_xs_init,
+};
+
 /* ------------------------------------------------------------------ */
 
 static int attach_xc3028(u8 addr, struct em28xx *dev)
@@ -440,7 +477,6 @@ static int dvb_init(struct em28xx *dev)
 			goto out_free;
 		}
 		break;
-	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
 	case EM2880_BOARD_KWORLD_DVB_310U:
 	case EM2880_BOARD_EMPIRE_DUAL_TV:
 		dvb->frontend = dvb_attach(zl10353_attach,
@@ -451,20 +487,28 @@ static int dvb_init(struct em28xx *dev)
 			goto out_free;
 		}
 		break;
+	case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900:
+		dvb->frontend = dvb_attach(zl10353_attach,
+					   &em28xx_zl10353_xc3028_no_i2c_gate,
+					   &dev->i2c_adap);
+		if (attach_xc3028(0x61, dev) < 0) {
+			result = -EINVAL;
+			goto out_free;
+		}
+		break;
 	case EM2880_BOARD_TERRATEC_HYBRID_XS:
+	case EM2881_BOARD_PINNACLE_HYBRID_PRO:
 		dvb->frontend = dvb_attach(zl10353_attach,
-					   &em28xx_terratec_xs_zl10353_xc3028,
+					   &em28xx_zl10353_xc3028_no_i2c_gate,
 					   &dev->i2c_adap);
 		if (dvb->frontend == NULL) {
 			/* This board could have either a zl10353 or a mt352.
 			   If the chip id isn't for zl10353, try mt352 */
-
-			/* FIXME: make support for mt352 work */
-			printk(KERN_ERR "version of this board with mt352 not "
-			       "currently supported\n");
-			result = -EINVAL;
-			goto out_free;
+			dvb->frontend = dvb_attach(mt352_attach,
+						   &terratec_xs_mt352_cfg,
+						   &dev->i2c_adap);
 		}
+
 		if (attach_xc3028(0x61, dev) < 0) {
 			result = -EINVAL;
 			goto out_free;
diff --git a/drivers/media/video/em28xx/em28xx-video.c b/drivers/media/video/em28xx/em28xx-video.c
index 14316c9..ff37b4c 100644
--- a/drivers/media/video/em28xx/em28xx-video.c
+++ b/drivers/media/video/em28xx/em28xx-video.c
@@ -657,8 +657,8 @@ static void get_scale(struct em28xx *dev,
 			unsigned int width, unsigned int height,
 			unsigned int *hscale, unsigned int *vscale)
 {
-	unsigned int          maxw   = norm_maxw(dev);
-	unsigned int          maxh   = norm_maxh(dev);
+	unsigned int          maxw = norm_maxw(dev);
+	unsigned int          maxh = norm_maxh(dev);
 
 	*hscale = (((unsigned long)maxw) << 12) / width - 4096L;
 	if (*hscale >= 0x4000)
@@ -726,11 +726,7 @@ static int vidioc_try_fmt_vid_cap(struct file *file, void *priv,
 		return -EINVAL;
 	}
 
-	if (dev->board.is_27xx) {
-		/* FIXME: This is the only supported fmt */
-		width  = 640;
-		height = 480;
-	} else if (dev->board.is_em2800) {
+	if (dev->board.is_em2800) {
 		/* the em2800 can only scale down to 50% */
 		height = height > (3 * maxh / 4) ? maxh : maxh / 2;
 		width = width > (3 * maxw / 4) ? maxw : maxw / 2;
@@ -767,12 +763,6 @@ static int em28xx_set_video_format(struct em28xx *dev, unsigned int fourcc,
 {
 	struct em28xx_fmt     *fmt;
 
-	/* FIXME: This is the only supported fmt */
-	if (dev->board.is_27xx) {
-		width  = 640;
-		height = 480;
-	}
-
 	fmt = format_by_fourcc(fourcc);
 	if (!fmt)
 		return -EINVAL;
diff --git a/drivers/media/video/em28xx/em28xx.h b/drivers/media/video/em28xx/em28xx.h
index d90fef4..45bd513 100644
--- a/drivers/media/video/em28xx/em28xx.h
+++ b/drivers/media/video/em28xx/em28xx.h
@@ -358,10 +358,15 @@ struct em28xx_input {
 #define INPUT(nr) (&em28xx_boards[dev->model].input[nr])
 
 enum em28xx_decoder {
-	EM28XX_NODECODER,
+	EM28XX_NODECODER = 0,
 	EM28XX_TVP5150,
 	EM28XX_SAA711X,
+};
+
+enum em28xx_sensor {
+	EM28XX_NOSENSOR = 0,
 	EM28XX_MT9V011,
+	EM28XX_MT9M001,
 };
 
 enum em28xx_adecoder {
@@ -390,7 +395,7 @@ struct em28xx_board {
 	unsigned int max_range_640_480:1;
 	unsigned int has_dvb:1;
 	unsigned int has_snapshot_button:1;
-	unsigned int is_27xx:1;
+	unsigned int is_webcam:1;
 	unsigned int valid:1;
 
 	unsigned char xclk, i2c_speed;
@@ -474,6 +479,14 @@ struct em28xx {
 	struct v4l2_device v4l2_dev;
 	struct em28xx_board board;
 
+	/* Webcam specific fields */
+	enum em28xx_sensor em28xx_sensor;
+	int sensor_xres, sensor_yres;
+	int sensor_xtal;
+
+	/* Vinmode/Vinctl used at the driver */
+	int vinmode, vinctl;
+
 	unsigned int stream_on:1;	/* Locks streams */
 	unsigned int has_audio_class:1;
 	unsigned int has_alsa_audio:1;
@@ -754,17 +767,23 @@ static inline int em28xx_gamma_set(struct em28xx *dev, s32 val)
 /*FIXME: maxw should be dependent of alt mode */
 static inline unsigned int norm_maxw(struct em28xx *dev)
 {
+	if (dev->board.is_webcam)
+		return dev->sensor_xres;
+
 	if (dev->board.max_range_640_480)
 		return 640;
-	else
-		return 720;
+
+	return 720;
 }
 
 static inline unsigned int norm_maxh(struct em28xx *dev)
 {
+	if (dev->board.is_webcam)
+		return dev->sensor_yres;
+
 	if (dev->board.max_range_640_480)
 		return 480;
-	else
-		return (dev->norm & V4L2_STD_625_50) ? 576 : 480;
+
+	return (dev->norm & V4L2_STD_625_50) ? 576 : 480;
 }
 #endif
diff --git a/drivers/media/video/gspca/Kconfig b/drivers/media/video/gspca/Kconfig
index 578dc4f..34f46f2 100644
--- a/drivers/media/video/gspca/Kconfig
+++ b/drivers/media/video/gspca/Kconfig
@@ -102,6 +102,22 @@ config USB_GSPCA_PAC7311
 	  To compile this driver as a module, choose M here: the
 	  module will be called gspca_pac7311.
 
+config USB_GSPCA_SN9C20X
+       tristate "SN9C20X USB Camera Driver"
+       depends on VIDEO_V4L2 && USB_GSPCA
+       help
+	 Say Y here if you want support for cameras based on the
+	 sn9c20x chips (SN9C201 and SN9C202).
+
+	 To compile this driver as a module, choose M here: the
+	 module will be called gspca_sn9c20x.
+
+config USB_GSPCA_SN9C20X_EVDEV
+       bool "Enable evdev support"
+       depends on USB_GSPCA_SN9C20X
+       ---help---
+	 Say Y here in order to enable evdev support for sn9c20x webcam button.
+
 config USB_GSPCA_SONIXB
 	tristate "SONIX Bayer USB Camera Driver"
 	depends on VIDEO_V4L2 && USB_GSPCA
diff --git a/drivers/media/video/gspca/Makefile b/drivers/media/video/gspca/Makefile
index 8a6643e..f6d3b86 100644
--- a/drivers/media/video/gspca/Makefile
+++ b/drivers/media/video/gspca/Makefile
@@ -8,6 +8,7 @@ obj-$(CONFIG_USB_GSPCA_OV519)    += gspca_ov519.o
 obj-$(CONFIG_USB_GSPCA_OV534)    += gspca_ov534.o
 obj-$(CONFIG_USB_GSPCA_PAC207)   += gspca_pac207.o
 obj-$(CONFIG_USB_GSPCA_PAC7311)  += gspca_pac7311.o
+obj-$(CONFIG_USB_GSPCA_SN9C20X)  += gspca_sn9c20x.o
 obj-$(CONFIG_USB_GSPCA_SONIXB)   += gspca_sonixb.o
 obj-$(CONFIG_USB_GSPCA_SONIXJ)   += gspca_sonixj.o
 obj-$(CONFIG_USB_GSPCA_SPCA500)  += gspca_spca500.o
@@ -35,6 +36,7 @@ gspca_ov519-objs    := ov519.o
 gspca_ov534-objs    := ov534.o
 gspca_pac207-objs   := pac207.o
 gspca_pac7311-objs  := pac7311.o
+gspca_sn9c20x-objs  := sn9c20x.o
 gspca_sonixb-objs   := sonixb.o
 gspca_sonixj-objs   := sonixj.o
 gspca_spca500-objs  := spca500.o
diff --git a/drivers/media/video/gspca/conex.c b/drivers/media/video/gspca/conex.c
index 219cfa6..8d48ea1 100644
--- a/drivers/media/video/gspca/conex.c
+++ b/drivers/media/video/gspca/conex.c
@@ -846,6 +846,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
 	/* create the JPEG header */
 	sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+	if (!sd->jpeg_hdr)
+		return -ENOMEM;
 	jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
 			0x22);		/* JPEG 411 */
 	jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/gspca/gspca.c b/drivers/media/video/gspca/gspca.c
index 1e89600..b8561df 100644
--- a/drivers/media/video/gspca/gspca.c
+++ b/drivers/media/video/gspca/gspca.c
@@ -727,6 +727,74 @@ static int gspca_get_mode(struct gspca_dev *gspca_dev,
 	return -EINVAL;
 }
 
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int vidioc_g_register(struct file *file, void *priv,
+			struct v4l2_dbg_register *reg)
+{
+	int ret;
+	struct gspca_dev *gspca_dev = priv;
+
+	if (!gspca_dev->sd_desc->get_chip_ident)
+		return -EINVAL;
+
+	if (!gspca_dev->sd_desc->get_register)
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&gspca_dev->usb_lock))
+		return -ERESTARTSYS;
+	if (gspca_dev->present)
+		ret = gspca_dev->sd_desc->get_register(gspca_dev, reg);
+	else
+		ret = -ENODEV;
+	mutex_unlock(&gspca_dev->usb_lock);
+
+	return ret;
+}
+
+static int vidioc_s_register(struct file *file, void *priv,
+			struct v4l2_dbg_register *reg)
+{
+	int ret;
+	struct gspca_dev *gspca_dev = priv;
+
+	if (!gspca_dev->sd_desc->get_chip_ident)
+		return -EINVAL;
+
+	if (!gspca_dev->sd_desc->set_register)
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&gspca_dev->usb_lock))
+		return -ERESTARTSYS;
+	if (gspca_dev->present)
+		ret = gspca_dev->sd_desc->set_register(gspca_dev, reg);
+	else
+		ret = -ENODEV;
+	mutex_unlock(&gspca_dev->usb_lock);
+
+	return ret;
+}
+#endif
+
+static int vidioc_g_chip_ident(struct file *file, void *priv,
+			struct v4l2_dbg_chip_ident *chip)
+{
+	int ret;
+	struct gspca_dev *gspca_dev = priv;
+
+	if (!gspca_dev->sd_desc->get_chip_ident)
+		return -EINVAL;
+
+	if (mutex_lock_interruptible(&gspca_dev->usb_lock))
+		return -ERESTARTSYS;
+	if (gspca_dev->present)
+		ret = gspca_dev->sd_desc->get_chip_ident(gspca_dev, chip);
+	else
+		ret = -ENODEV;
+	mutex_unlock(&gspca_dev->usb_lock);
+
+	return ret;
+}
+
 static int vidioc_enum_fmt_vid_cap(struct file *file, void  *priv,
 				struct v4l2_fmtdesc *fmtdesc)
 {
@@ -1883,6 +1951,11 @@ static const struct v4l2_ioctl_ops dev_ioctl_ops = {
 	.vidioc_s_parm		= vidioc_s_parm,
 	.vidioc_s_std		= vidioc_s_std,
 	.vidioc_enum_framesizes = vidioc_enum_framesizes,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.vidioc_g_register	= vidioc_g_register,
+	.vidioc_s_register	= vidioc_s_register,
+#endif
+	.vidioc_g_chip_ident	= vidioc_g_chip_ident,
 #ifdef CONFIG_VIDEO_V4L1_COMPAT
 	.vidiocgmbuf          = vidiocgmbuf,
 #endif
diff --git a/drivers/media/video/gspca/gspca.h b/drivers/media/video/gspca/gspca.h
index bd1faff..46c4eff 100644
--- a/drivers/media/video/gspca/gspca.h
+++ b/drivers/media/video/gspca/gspca.h
@@ -69,6 +69,10 @@ typedef void (*cam_v_op) (struct gspca_dev *);
 typedef int (*cam_cf_op) (struct gspca_dev *, const struct usb_device_id *);
 typedef int (*cam_jpg_op) (struct gspca_dev *,
 				struct v4l2_jpegcompression *);
+typedef int (*cam_reg_op) (struct gspca_dev *,
+				struct v4l2_dbg_register *);
+typedef int (*cam_ident_op) (struct gspca_dev *,
+				struct v4l2_dbg_chip_ident *);
 typedef int (*cam_streamparm_op) (struct gspca_dev *,
 				  struct v4l2_streamparm *);
 typedef int (*cam_qmnu_op) (struct gspca_dev *,
@@ -105,6 +109,11 @@ struct sd_desc {
 	cam_qmnu_op querymenu;
 	cam_streamparm_op get_streamparm;
 	cam_streamparm_op set_streamparm;
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	cam_reg_op set_register;
+	cam_reg_op get_register;
+#endif
+	cam_ident_op get_chip_ident;
 };
 
 /* packet types when moving from iso buf to frame buf */
diff --git a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
index 191bcd7..0163903 100644
--- a/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
+++ b/drivers/media/video/gspca/m5602/m5602_s5k4aa.c
@@ -476,9 +476,6 @@ static int s5k4aa_set_vflip(struct gspca_dev *gspca_dev, __s32 val)
 	err = m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1);
 	if (err < 0)
 		return err;
-	err = m5602_write_sensor(sd, S5K4AA_READ_MODE, &data, 1);
-	if (err < 0)
-		return err;
 
 	err = m5602_read_sensor(sd, S5K4AA_READ_MODE, &data, 1);
 	if (err < 0)
@@ -524,9 +521,6 @@ static int s5k4aa_set_hflip(struct gspca_dev *gspca_dev, __s32 val)
 	err = m5602_write_sensor(sd, S5K4AA_PAGE_MAP, &data, 1);
 	if (err < 0)
 		return err;
-	err = m5602_write_sensor(sd, S5K4AA_READ_MODE, &data, 1);
-	if (err < 0)
-		return err;
 
 	err = m5602_read_sensor(sd, S5K4AA_READ_MODE, &data, 1);
 	if (err < 0)
diff --git a/drivers/media/video/gspca/mars.c b/drivers/media/video/gspca/mars.c
index 75e8d14..de769ca 100644
--- a/drivers/media/video/gspca/mars.c
+++ b/drivers/media/video/gspca/mars.c
@@ -201,6 +201,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
 	/* create the JPEG header */
 	sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+	if (!sd->jpeg_hdr)
+		return -ENOMEM;
 	jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
 			0x21);		/* JPEG 422 */
 	jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/gspca/sn9c20x.c b/drivers/media/video/gspca/sn9c20x.c
new file mode 100644
index 0000000..fcfbbd3
--- /dev/null
+++ b/drivers/media/video/gspca/sn9c20x.c
@@ -0,0 +1,2434 @@
+/*
+ *	Sonix sn9c201 sn9c202 library
+ *	Copyright (C) 2008-2009 microdia project <microdia@googlegroups.com>
+ *	Copyright (C) 2009 Brian Johnson <brijohn@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV
+#include <linux/kthread.h>
+#include <linux/freezer.h>
+#include <linux/usb/input.h>
+#include <linux/input.h>
+#endif
+
+#include "gspca.h"
+#include "jpeg.h"
+
+#include <media/v4l2-chip-ident.h>
+
+MODULE_AUTHOR("Brian Johnson <brijohn@gmail.com>, "
+		"microdia project <microdia@googlegroups.com>");
+MODULE_DESCRIPTION("GSPCA/SN9C20X USB Camera Driver");
+MODULE_LICENSE("GPL");
+
+#define MODULE_NAME "sn9c20x"
+
+#define MODE_RAW	0x10
+#define MODE_JPEG	0x20
+#define MODE_SXGA	0x80
+
+#define SENSOR_OV9650	0
+#define SENSOR_OV9655	1
+#define SENSOR_SOI968	2
+#define SENSOR_OV7660	3
+#define SENSOR_OV7670	4
+#define SENSOR_MT9V011	5
+#define SENSOR_MT9V111	6
+#define SENSOR_MT9V112	7
+#define SENSOR_MT9M001	8
+#define SENSOR_MT9M111	9
+#define SENSOR_HV7131R	10
+#define SENSOR_MT9VPRB	20
+
+/* specific webcam descriptor */
+struct sd {
+	struct gspca_dev gspca_dev;
+
+#define MIN_AVG_LUM 80
+#define MAX_AVG_LUM 130
+	atomic_t avg_lum;
+	u8 old_step;
+	u8 older_step;
+	u8 exposure_step;
+
+	u8 brightness;
+	u8 contrast;
+	u8 saturation;
+	s16 hue;
+	u8 gamma;
+	u8 red;
+	u8 blue;
+
+	u8 hflip;
+	u8 vflip;
+	u8 gain;
+	u16 exposure;
+	u8 auto_exposure;
+
+	u8 i2c_addr;
+	u8 sensor;
+	u8 hstart;
+	u8 vstart;
+
+	u8 *jpeg_hdr;
+	u8 quality;
+
+#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV
+	struct input_dev *input_dev;
+	u8 input_gpio;
+	struct task_struct *input_task;
+#endif
+};
+
+static int sd_setbrightness(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getbrightness(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setcontrast(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getcontrast(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setsaturation(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getsaturation(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_sethue(struct gspca_dev *gspca_dev, s32 val);
+static int sd_gethue(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setgamma(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getgamma(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setredbalance(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getredbalance(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setbluebalance(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getbluebalance(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setvflip(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getvflip(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_sethflip(struct gspca_dev *gspca_dev, s32 val);
+static int sd_gethflip(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setgain(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getgain(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setexposure(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getexposure(struct gspca_dev *gspca_dev, s32 *val);
+static int sd_setautoexposure(struct gspca_dev *gspca_dev, s32 val);
+static int sd_getautoexposure(struct gspca_dev *gspca_dev, s32 *val);
+
+static struct ctrl sd_ctrls[] = {
+	{
+#define BRIGHTNESS_IDX 0
+	    {
+		.id      = V4L2_CID_BRIGHTNESS,
+		.type    = V4L2_CTRL_TYPE_INTEGER,
+		.name    = "Brightness",
+		.minimum = 0,
+		.maximum = 0xff,
+		.step    = 1,
+#define BRIGHTNESS_DEFAULT 0x7f
+		.default_value = BRIGHTNESS_DEFAULT,
+	    },
+	    .set = sd_setbrightness,
+	    .get = sd_getbrightness,
+	},
+	{
+#define CONTRAST_IDX 1
+	    {
+		.id      = V4L2_CID_CONTRAST,
+		.type    = V4L2_CTRL_TYPE_INTEGER,
+		.name    = "Contrast",
+		.minimum = 0,
+		.maximum = 0xff,
+		.step    = 1,
+#define CONTRAST_DEFAULT 0x7f
+		.default_value = CONTRAST_DEFAULT,
+	    },
+	    .set = sd_setcontrast,
+	    .get = sd_getcontrast,
+	},
+	{
+#define SATURATION_IDX 2
+	    {
+		.id      = V4L2_CID_SATURATION,
+		.type    = V4L2_CTRL_TYPE_INTEGER,
+		.name    = "Saturation",
+		.minimum = 0,
+		.maximum = 0xff,
+		.step    = 1,
+#define SATURATION_DEFAULT 0x7f
+		.default_value = SATURATION_DEFAULT,
+	    },
+	    .set = sd_setsaturation,
+	    .get = sd_getsaturation,
+	},
+	{
+#define HUE_IDX 3
+	    {
+		.id      = V4L2_CID_HUE,
+		.type    = V4L2_CTRL_TYPE_INTEGER,
+		.name    = "Hue",
+		.minimum = -180,
+		.maximum = 180,
+		.step    = 1,
+#define HUE_DEFAULT 0
+		.default_value = HUE_DEFAULT,
+	    },
+	    .set = sd_sethue,
+	    .get = sd_gethue,
+	},
+	{
+#define GAMMA_IDX 4
+	    {
+		.id      = V4L2_CID_GAMMA,
+		.type    = V4L2_CTRL_TYPE_INTEGER,
+		.name    = "Gamma",
+		.minimum = 0,
+		.maximum = 0xff,
+		.step    = 1,
+#define GAMMA_DEFAULT 0x10
+		.default_value = GAMMA_DEFAULT,
+	    },
+	    .set = sd_setgamma,
+	    .get = sd_getgamma,
+	},
+	{
+#define BLUE_IDX 5
+	    {
+		.id	 = V4L2_CID_BLUE_BALANCE,
+		.type	 = V4L2_CTRL_TYPE_INTEGER,
+		.name	 = "Blue Balance",
+		.minimum = 0,
+		.maximum = 0x7f,
+		.step	 = 1,
+#define BLUE_DEFAULT 0x28
+		.default_value = BLUE_DEFAULT,
+	    },
+	    .set = sd_setbluebalance,
+	    .get = sd_getbluebalance,
+	},
+	{
+#define RED_IDX 6
+	    {
+		.id	 = V4L2_CID_RED_BALANCE,
+		.type	 = V4L2_CTRL_TYPE_INTEGER,
+		.name	 = "Red Balance",
+		.minimum = 0,
+		.maximum = 0x7f,
+		.step	 = 1,
+#define RED_DEFAULT 0x28
+		.default_value = RED_DEFAULT,
+	    },
+	    .set = sd_setredbalance,
+	    .get = sd_getredbalance,
+	},
+	{
+#define HFLIP_IDX 7
+	    {
+		.id      = V4L2_CID_HFLIP,
+		.type    = V4L2_CTRL_TYPE_BOOLEAN,
+		.name    = "Horizontal Flip",
+		.minimum = 0,
+		.maximum = 1,
+		.step    = 1,
+#define HFLIP_DEFAULT 0
+		.default_value = HFLIP_DEFAULT,
+	    },
+	    .set = sd_sethflip,
+	    .get = sd_gethflip,
+	},
+	{
+#define VFLIP_IDX 8
+	    {
+		.id      = V4L2_CID_VFLIP,
+		.type    = V4L2_CTRL_TYPE_BOOLEAN,
+		.name    = "Vertical Flip",
+		.minimum = 0,
+		.maximum = 1,
+		.step    = 1,
+#define VFLIP_DEFAULT 0
+		.default_value = VFLIP_DEFAULT,
+	    },
+	    .set = sd_setvflip,
+	    .get = sd_getvflip,
+	},
+	{
+#define EXPOSURE_IDX 9
+	    {
+		.id      = V4L2_CID_EXPOSURE,
+		.type    = V4L2_CTRL_TYPE_INTEGER,
+		.name    = "Exposure",
+		.minimum = 0,
+		.maximum = 0x1780,
+		.step    = 1,
+#define EXPOSURE_DEFAULT 0x33
+		.default_value = EXPOSURE_DEFAULT,
+	    },
+	    .set = sd_setexposure,
+	    .get = sd_getexposure,
+	},
+	{
+#define GAIN_IDX 10
+	    {
+		.id      = V4L2_CID_GAIN,
+		.type    = V4L2_CTRL_TYPE_INTEGER,
+		.name    = "Gain",
+		.minimum = 0,
+		.maximum = 28,
+		.step    = 1,
+#define GAIN_DEFAULT 0x00
+		.default_value = GAIN_DEFAULT,
+	    },
+	    .set = sd_setgain,
+	    .get = sd_getgain,
+	},
+	{
+#define AUTOGAIN_IDX 11
+	    {
+		.id      = V4L2_CID_AUTOGAIN,
+		.type    = V4L2_CTRL_TYPE_BOOLEAN,
+		.name    = "Auto Exposure",
+		.minimum = 0,
+		.maximum = 1,
+		.step    = 1,
+#define AUTO_EXPOSURE_DEFAULT 1
+		.default_value = AUTO_EXPOSURE_DEFAULT,
+	    },
+	    .set = sd_setautoexposure,
+	    .get = sd_getautoexposure,
+	},
+};
+
+static const struct v4l2_pix_format vga_mode[] = {
+	{160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+		.bytesperline = 240,
+		.sizeimage = 240 * 120,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 0 | MODE_JPEG},
+	{160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 160,
+		.sizeimage = 160 * 120,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0 | MODE_RAW},
+	{160, 120, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+		.bytesperline = 240,
+		.sizeimage = 240 * 120,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0},
+	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+		.bytesperline = 480,
+		.sizeimage = 480 * 240 ,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 1 | MODE_JPEG},
+	{320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240 ,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1 | MODE_RAW},
+	{320, 240, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+		.bytesperline = 480,
+		.sizeimage = 480 * 240 ,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1},
+	{640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+		.bytesperline = 960,
+		.sizeimage = 960 * 480,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 2 | MODE_JPEG},
+	{640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 640,
+		.sizeimage = 640 * 480,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 2 | MODE_RAW},
+	{640, 480, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+		.bytesperline = 960,
+		.sizeimage = 960 * 480,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 2},
+};
+
+static const struct v4l2_pix_format sxga_mode[] = {
+	{160, 120, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+		.bytesperline = 240,
+		.sizeimage = 240 * 120,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 0 | MODE_JPEG},
+	{160, 120, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 160,
+		.sizeimage = 160 * 120,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0 | MODE_RAW},
+	{160, 120, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+		.bytesperline = 240,
+		.sizeimage = 240 * 120,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 0},
+	{320, 240, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+		.bytesperline = 480,
+		.sizeimage = 480 * 240 ,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 1 | MODE_JPEG},
+	{320, 240, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 320,
+		.sizeimage = 320 * 240 ,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1 | MODE_RAW},
+	{320, 240, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+		.bytesperline = 480,
+		.sizeimage = 480 * 240 ,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 1},
+	{640, 480, V4L2_PIX_FMT_JPEG, V4L2_FIELD_NONE,
+		.bytesperline = 960,
+		.sizeimage = 960 * 480,
+		.colorspace = V4L2_COLORSPACE_JPEG,
+		.priv = 2 | MODE_JPEG},
+	{640, 480, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 640,
+		.sizeimage = 640 * 480,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 2 | MODE_RAW},
+	{640, 480, V4L2_PIX_FMT_SN9C20X_I420, V4L2_FIELD_NONE,
+		.bytesperline = 960,
+		.sizeimage = 960 * 480,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 2},
+	{1280, 1024, V4L2_PIX_FMT_SBGGR8, V4L2_FIELD_NONE,
+		.bytesperline = 1280,
+		.sizeimage = (1280 * 1024) + 64,
+		.colorspace = V4L2_COLORSPACE_SRGB,
+		.priv = 3 | MODE_RAW | MODE_SXGA},
+};
+
+static const int hsv_red_x[] = {
+	41,  44,  46,  48,  50,  52,  54,  56,
+	58,  60,  62,  64,  66,  68,  70,  72,
+	74,  76,  78,  80,  81,  83,  85,  87,
+	88,  90,  92,  93,  95,  97,  98, 100,
+	101, 102, 104, 105, 107, 108, 109, 110,
+	112, 113, 114, 115, 116, 117, 118, 119,
+	120, 121, 122, 123, 123, 124, 125, 125,
+	126, 127, 127, 128, 128, 129, 129, 129,
+	130, 130, 130, 130, 131, 131, 131, 131,
+	131, 131, 131, 131, 130, 130, 130, 130,
+	129, 129, 129, 128, 128, 127, 127, 126,
+	125, 125, 124, 123, 122, 122, 121, 120,
+	119, 118, 117, 116, 115, 114, 112, 111,
+	110, 109, 107, 106, 105, 103, 102, 101,
+	99,  98,  96,  94,  93,  91,  90,  88,
+	86,  84,  83,  81,  79,  77,  75,  74,
+	72,  70,  68,  66,  64,  62,  60,  58,
+	56,  54,  52,  49,  47,  45,  43,  41,
+	39,  36,  34,  32,  30,  28,  25,  23,
+	21,  19,  16,  14,  12,   9,   7,   5,
+	3,   0,  -1,  -3,  -6,  -8, -10, -12,
+	-15, -17, -19, -22, -24, -26, -28, -30,
+	-33, -35, -37, -39, -41, -44, -46, -48,
+	-50, -52, -54, -56, -58, -60, -62, -64,
+	-66, -68, -70, -72, -74, -76, -78, -80,
+	-81, -83, -85, -87, -88, -90, -92, -93,
+	-95, -97, -98, -100, -101, -102, -104, -105,
+	-107, -108, -109, -110, -112, -113, -114, -115,
+	-116, -117, -118, -119, -120, -121, -122, -123,
+	-123, -124, -125, -125, -126, -127, -127, -128,
+	-128, -128, -128, -128, -128, -128, -128, -128,
+	-128, -128, -128, -128, -128, -128, -128, -128,
+	-128, -128, -128, -128, -128, -128, -128, -128,
+	-128, -127, -127, -126, -125, -125, -124, -123,
+	-122, -122, -121, -120, -119, -118, -117, -116,
+	-115, -114, -112, -111, -110, -109, -107, -106,
+	-105, -103, -102, -101, -99, -98, -96, -94,
+	-93, -91, -90, -88, -86, -84, -83, -81,
+	-79, -77, -75, -74, -72, -70, -68, -66,
+	-64, -62, -60, -58, -56, -54, -52, -49,
+	-47, -45, -43, -41, -39, -36, -34, -32,
+	-30, -28, -25, -23, -21, -19, -16, -14,
+	-12,  -9,  -7,  -5,  -3,   0,   1,   3,
+	6,   8,  10,  12,  15,  17,  19,  22,
+	24,  26,  28,  30,  33,  35,  37,  39, 41
+};
+
+static const int hsv_red_y[] = {
+	82,  80,  78,  76,  74,  73,  71,  69,
+	67,  65,  63,  61,  58,  56,  54,  52,
+	50,  48,  46,  44,  41,  39,  37,  35,
+	32,  30,  28,  26,  23,  21,  19,  16,
+	14,  12,  10,   7,   5,   3,   0,  -1,
+	-3,  -6,  -8, -10, -13, -15, -17, -19,
+	-22, -24, -26, -29, -31, -33, -35, -38,
+	-40, -42, -44, -46, -48, -51, -53, -55,
+	-57, -59, -61, -63, -65, -67, -69, -71,
+	-73, -75, -77, -79, -81, -82, -84, -86,
+	-88, -89, -91, -93, -94, -96, -98, -99,
+	-101, -102, -104, -105, -106, -108, -109, -110,
+	-112, -113, -114, -115, -116, -117, -119, -120,
+	-120, -121, -122, -123, -124, -125, -126, -126,
+	-127, -128, -128, -128, -128, -128, -128, -128,
+	-128, -128, -128, -128, -128, -128, -128, -128,
+	-128, -128, -128, -128, -128, -128, -128, -128,
+	-128, -128, -128, -128, -128, -128, -128, -128,
+	-127, -127, -126, -125, -125, -124, -123, -122,
+	-121, -120, -119, -118, -117, -116, -115, -114,
+	-113, -111, -110, -109, -107, -106, -105, -103,
+	-102, -100, -99, -97, -96, -94, -92, -91,
+	-89, -87, -85, -84, -82, -80, -78, -76,
+	-74, -73, -71, -69, -67, -65, -63, -61,
+	-58, -56, -54, -52, -50, -48, -46, -44,
+	-41, -39, -37, -35, -32, -30, -28, -26,
+	-23, -21, -19, -16, -14, -12, -10,  -7,
+	-5,  -3,   0,   1,   3,   6,   8,  10,
+	13,  15,  17,  19,  22,  24,  26,  29,
+	31,  33,  35,  38,  40,  42,  44,  46,
+	48,  51,  53,  55,  57,  59,  61,  63,
+	65,  67,  69,  71,  73,  75,  77,  79,
+	81,  82,  84,  86,  88,  89,  91,  93,
+	94,  96,  98,  99, 101, 102, 104, 105,
+	106, 108, 109, 110, 112, 113, 114, 115,
+	116, 117, 119, 120, 120, 121, 122, 123,
+	124, 125, 126, 126, 127, 128, 128, 129,
+	129, 130, 130, 131, 131, 131, 131, 132,
+	132, 132, 132, 132, 132, 132, 132, 132,
+	132, 132, 132, 131, 131, 131, 130, 130,
+	130, 129, 129, 128, 127, 127, 126, 125,
+	125, 124, 123, 122, 121, 120, 119, 118,
+	117, 116, 115, 114, 113, 111, 110, 109,
+	107, 106, 105, 103, 102, 100,  99,  97,
+	96, 94, 92, 91, 89, 87, 85, 84, 82
+};
+
+static const int hsv_green_x[] = {
+	-124, -124, -125, -125, -125, -125, -125, -125,
+	-125, -126, -126, -125, -125, -125, -125, -125,
+	-125, -124, -124, -124, -123, -123, -122, -122,
+	-121, -121, -120, -120, -119, -118, -117, -117,
+	-116, -115, -114, -113, -112, -111, -110, -109,
+	-108, -107, -105, -104, -103, -102, -100, -99,
+	-98, -96, -95, -93, -92, -91, -89, -87,
+	-86, -84, -83, -81, -79, -77, -76, -74,
+	-72, -70, -69, -67, -65, -63, -61, -59,
+	-57, -55, -53, -51, -49, -47, -45, -43,
+	-41, -39, -37, -35, -33, -30, -28, -26,
+	-24, -22, -20, -18, -15, -13, -11,  -9,
+	-7,  -4,  -2,   0,   1,   3,   6,   8,
+	10,  12,  14,  17,  19,  21,  23,  25,
+	27,  29,  32,  34,  36,  38,  40,  42,
+	44,  46,  48,  50,  52,  54,  56,  58,
+	60,  62,  64,  66,  68,  70,  71,  73,
+	75,  77,  78,  80,  82,  83,  85,  87,
+	88,  90,  91,  93,  94,  96,  97,  98,
+	100, 101, 102, 104, 105, 106, 107, 108,
+	109, 111, 112, 113, 113, 114, 115, 116,
+	117, 118, 118, 119, 120, 120, 121, 122,
+	122, 123, 123, 124, 124, 124, 125, 125,
+	125, 125, 125, 125, 125, 126, 126, 125,
+	125, 125, 125, 125, 125, 124, 124, 124,
+	123, 123, 122, 122, 121, 121, 120, 120,
+	119, 118, 117, 117, 116, 115, 114, 113,
+	112, 111, 110, 109, 108, 107, 105, 104,
+	103, 102, 100,  99,  98,  96,  95,  93,
+	92,  91,  89,  87,  86,  84,  83,  81,
+	79,  77,  76,  74,  72,  70,  69,  67,
+	65,  63,  61,  59,  57,  55,  53,  51,
+	49,  47,  45,  43,  41,  39,  37,  35,
+	33,  30,  28,  26,  24,  22,  20,  18,
+	15,  13,  11,   9,   7,   4,   2,   0,
+	-1,  -3,  -6,  -8, -10, -12, -14, -17,
+	-19, -21, -23, -25, -27, -29, -32, -34,
+	-36, -38, -40, -42, -44, -46, -48, -50,
+	-52, -54, -56, -58, -60, -62, -64, -66,
+	-68, -70, -71, -73, -75, -77, -78, -80,
+	-82, -83, -85, -87, -88, -90, -91, -93,
+	-94, -96, -97, -98, -100, -101, -102, -104,
+	-105, -106, -107, -108, -109, -111, -112, -113,
+	-113, -114, -115, -116, -117, -118, -118, -119,
+	-120, -120, -121, -122, -122, -123, -123, -124, -124
+};
+
+static const int hsv_green_y[] = {
+	-100, -99, -98, -97, -95, -94, -93, -91,
+	-90, -89, -87, -86, -84, -83, -81, -80,
+	-78, -76, -75, -73, -71, -70, -68, -66,
+	-64, -63, -61, -59, -57, -55, -53, -51,
+	-49, -48, -46, -44, -42, -40, -38, -36,
+	-34, -32, -30, -27, -25, -23, -21, -19,
+	-17, -15, -13, -11,  -9,  -7,  -4,  -2,
+	0,   1,   3,   5,   7,   9,  11,  14,
+	16,  18,  20,  22,  24,  26,  28,  30,
+	32,  34,  36,  38,  40,  42,  44,  46,
+	48,  50,  52,  54,  56,  58,  59,  61,
+	63,  65,  67,  68,  70,  72,  74,  75,
+	77,  78,  80,  82,  83,  85,  86,  88,
+	89,  90,  92,  93,  95,  96,  97,  98,
+	100, 101, 102, 103, 104, 105, 106, 107,
+	108, 109, 110, 111, 112, 112, 113, 114,
+	115, 115, 116, 116, 117, 117, 118, 118,
+	119, 119, 119, 120, 120, 120, 120, 120,
+	121, 121, 121, 121, 121, 121, 120, 120,
+	120, 120, 120, 119, 119, 119, 118, 118,
+	117, 117, 116, 116, 115, 114, 114, 113,
+	112, 111, 111, 110, 109, 108, 107, 106,
+	105, 104, 103, 102, 100,  99,  98,  97,
+	95,  94,  93,  91,  90,  89,  87,  86,
+	84,  83,  81,  80,  78,  76,  75,  73,
+	71,  70,  68,  66,  64,  63,  61,  59,
+	57,  55,  53,  51,  49,  48,  46,  44,
+	42,  40,  38,  36,  34,  32,  30,  27,
+	25,  23,  21,  19,  17,  15,  13,  11,
+	9,   7,   4,   2,   0,  -1,  -3,  -5,
+	-7,  -9, -11, -14, -16, -18, -20, -22,
+	-24, -26, -28, -30, -32, -34, -36, -38,
+	-40, -42, -44, -46, -48, -50, -52, -54,
+	-56, -58, -59, -61, -63, -65, -67, -68,
+	-70, -72, -74, -75, -77, -78, -80, -82,
+	-83, -85, -86, -88, -89, -90, -92, -93,
+	-95, -96, -97, -98, -100, -101, -102, -103,
+	-104, -105, -106, -107, -108, -109, -110, -111,
+	-112, -112, -113, -114, -115, -115, -116, -116,
+	-117, -117, -118, -118, -119, -119, -119, -120,
+	-120, -120, -120, -120, -121, -121, -121, -121,
+	-121, -121, -120, -120, -120, -120, -120, -119,
+	-119, -119, -118, -118, -117, -117, -116, -116,
+	-115, -114, -114, -113, -112, -111, -111, -110,
+	-109, -108, -107, -106, -105, -104, -103, -102, -100
+};
+
+static const int hsv_blue_x[] = {
+	112, 113, 114, 114, 115, 116, 117, 117,
+	118, 118, 119, 119, 120, 120, 120, 121,
+	121, 121, 122, 122, 122, 122, 122, 122,
+	122, 122, 122, 122, 122, 122, 121, 121,
+	121, 120, 120, 120, 119, 119, 118, 118,
+	117, 116, 116, 115, 114, 113, 113, 112,
+	111, 110, 109, 108, 107, 106, 105, 104,
+	103, 102, 100,  99,  98,  97,  95,  94,
+	93,  91,  90,  88,  87,  85,  84,  82,
+	80,  79,  77,  76,  74,  72,  70,  69,
+	67,  65,  63,  61,  60,  58,  56,  54,
+	52,  50,  48,  46,  44,  42,  40,  38,
+	36,  34,  32,  30,  28,  26,  24,  22,
+	19,  17,  15,  13,  11,   9,   7,   5,
+	2,   0,  -1,  -3,  -5,  -7,  -9, -12,
+	-14, -16, -18, -20, -22, -24, -26, -28,
+	-31, -33, -35, -37, -39, -41, -43, -45,
+	-47, -49, -51, -53, -54, -56, -58, -60,
+	-62, -64, -66, -67, -69, -71, -73, -74,
+	-76, -78, -79, -81, -83, -84, -86, -87,
+	-89, -90, -92, -93, -94, -96, -97, -98,
+	-99, -101, -102, -103, -104, -105, -106, -107,
+	-108, -109, -110, -111, -112, -113, -114, -114,
+	-115, -116, -117, -117, -118, -118, -119, -119,
+	-120, -120, -120, -121, -121, -121, -122, -122,
+	-122, -122, -122, -122, -122, -122, -122, -122,
+	-122, -122, -121, -121, -121, -120, -120, -120,
+	-119, -119, -118, -118, -117, -116, -116, -115,
+	-114, -113, -113, -112, -111, -110, -109, -108,
+	-107, -106, -105, -104, -103, -102, -100, -99,
+	-98, -97, -95, -94, -93, -91, -90, -88,
+	-87, -85, -84, -82, -80, -79, -77, -76,
+	-74, -72, -70, -69, -67, -65, -63, -61,
+	-60, -58, -56, -54, -52, -50, -48, -46,
+	-44, -42, -40, -38, -36, -34, -32, -30,
+	-28, -26, -24, -22, -19, -17, -15, -13,
+	-11,  -9,  -7,  -5,  -2,   0,   1,   3,
+	5,   7,   9,  12,  14,  16,  18,  20,
+	22,  24,  26,  28,  31,  33,  35,  37,
+	39,  41,  43,  45,  47,  49,  51,  53,
+	54,  56,  58,  60,  62,  64,  66,  67,
+	69,  71,  73,  74,  76,  78,  79,  81,
+	83,  84,  86,  87,  89,  90,  92,  93,
+	94,  96,  97,  98,  99, 101, 102, 103,
+	104, 105, 106, 107, 108, 109, 110, 111, 112
+};
+
+static const int hsv_blue_y[] = {
+	-11, -13, -15, -17, -19, -21, -23, -25,
+	-27, -29, -31, -33, -35, -37, -39, -41,
+	-43, -45, -46, -48, -50, -52, -54, -55,
+	-57, -59, -61, -62, -64, -66, -67, -69,
+	-71, -72, -74, -75, -77, -78, -80, -81,
+	-83, -84, -86, -87, -88, -90, -91, -92,
+	-93, -95, -96, -97, -98, -99, -100, -101,
+	-102, -103, -104, -105, -106, -106, -107, -108,
+	-109, -109, -110, -111, -111, -112, -112, -113,
+	-113, -114, -114, -114, -115, -115, -115, -115,
+	-116, -116, -116, -116, -116, -116, -116, -116,
+	-116, -115, -115, -115, -115, -114, -114, -114,
+	-113, -113, -112, -112, -111, -111, -110, -110,
+	-109, -108, -108, -107, -106, -105, -104, -103,
+	-102, -101, -100, -99, -98, -97, -96, -95,
+	-94, -93, -91, -90, -89, -88, -86, -85,
+	-84, -82, -81, -79, -78, -76, -75, -73,
+	-71, -70, -68, -67, -65, -63, -62, -60,
+	-58, -56, -55, -53, -51, -49, -47, -45,
+	-44, -42, -40, -38, -36, -34, -32, -30,
+	-28, -26, -24, -22, -20, -18, -16, -14,
+	-12, -10,  -8,  -6,  -4,  -2,   0,   1,
+	3,   5,   7,   9,  11,  13,  15,  17,
+	19,  21,  23,  25,  27,  29,  31,  33,
+	35,  37,  39,  41,  43,  45,  46,  48,
+	50,  52,  54,  55,  57,  59,  61,  62,
+	64,  66,  67,  69,  71,  72,  74,  75,
+	77,  78,  80,  81,  83,  84,  86,  87,
+	88,  90,  91,  92,  93,  95,  96,  97,
+	98,  99, 100, 101, 102, 103, 104, 105,
+	106, 106, 107, 108, 109, 109, 110, 111,
+	111, 112, 112, 113, 113, 114, 114, 114,
+	115, 115, 115, 115, 116, 116, 116, 116,
+	116, 116, 116, 116, 116, 115, 115, 115,
+	115, 114, 114, 114, 113, 113, 112, 112,
+	111, 111, 110, 110, 109, 108, 108, 107,
+	106, 105, 104, 103, 102, 101, 100,  99,
+	98,  97,  96,  95,  94,  93,  91,  90,
+	89,  88,  86,  85,  84,  82,  81,  79,
+	78,  76,  75,  73,  71,  70,  68,  67,
+	65,  63,  62,  60,  58,  56,  55,  53,
+	51,  49,  47,  45,  44,  42,  40,  38,
+	36,  34,  32,  30,  28,  26,  24,  22,
+	20,  18,  16,  14,  12,  10,   8,   6,
+	4,   2,   0,  -1,  -3,  -5,  -7,  -9, -11
+};
+
+static u16 i2c_ident[] = {
+	V4L2_IDENT_OV9650,
+	V4L2_IDENT_OV9655,
+	V4L2_IDENT_SOI968,
+	V4L2_IDENT_OV7660,
+	V4L2_IDENT_OV7670,
+	V4L2_IDENT_MT9V011,
+	V4L2_IDENT_MT9V111,
+	V4L2_IDENT_MT9V112,
+	V4L2_IDENT_MT9M001C12ST,
+	V4L2_IDENT_MT9M111,
+	V4L2_IDENT_HV7131R,
+};
+
+static u16 bridge_init[][2] = {
+	{0x1000, 0x78}, {0x1001, 0x40}, {0x1002, 0x1c},
+	{0x1020, 0x80}, {0x1061, 0x01}, {0x1067, 0x40},
+	{0x1068, 0x30}, {0x1069, 0x20},	{0x106a, 0x10},
+	{0x106b, 0x08},	{0x1188, 0x87},	{0x11a1, 0x00},
+	{0x11a2, 0x00},	{0x11a3, 0x6a},	{0x11a4, 0x50},
+	{0x11ab, 0x00},	{0x11ac, 0x00},	{0x11ad, 0x50},
+	{0x11ae, 0x3c},	{0x118a, 0x04},	{0x0395, 0x04},
+	{0x11b8, 0x3a},	{0x118b, 0x0e},	{0x10f7, 0x05},
+	{0x10f8, 0x14},	{0x10fa, 0xff},	{0x10f9, 0x00},
+	{0x11ba, 0x0a},	{0x11a5, 0x2d},	{0x11a6, 0x2d},
+	{0x11a7, 0x3a},	{0x11a8, 0x05},	{0x11a9, 0x04},
+	{0x11aa, 0x3f},	{0x11af, 0x28},	{0x11b0, 0xd8},
+	{0x11b1, 0x14},	{0x11b2, 0xec},	{0x11b3, 0x32},
+	{0x11b4, 0xdd},	{0x11b5, 0x32},	{0x11b6, 0xdd},
+	{0x10e0, 0x2c},	{0x11bc, 0x40},	{0x11bd, 0x01},
+	{0x11be, 0xf0},	{0x11bf, 0x00},	{0x118c, 0x1f},
+	{0x118d, 0x1f},	{0x118e, 0x1f},	{0x118f, 0x1f},
+	{0x1180, 0x01},	{0x1181, 0x00},	{0x1182, 0x01},
+	{0x1183, 0x00},	{0x1184, 0x50},	{0x1185, 0x80}
+};
+
+/* Gain = (bit[3:0] / 16 + 1) * (bit[4] + 1) * (bit[5] + 1) * (bit[6] + 1) */
+static u8 ov_gain[] = {
+	0x00 /* 1x */, 0x04 /* 1.25x */, 0x08 /* 1.5x */, 0x0c /* 1.75x */,
+	0x10 /* 2x */, 0x12 /* 2.25x */, 0x14 /* 2.5x */, 0x16 /* 2.75x */,
+	0x18 /* 3x */, 0x1a /* 3.25x */, 0x1c /* 3.5x */, 0x1e /* 3.75x */,
+	0x30 /* 4x */, 0x31 /* 4.25x */, 0x32 /* 4.5x */, 0x33 /* 4.75x */,
+	0x34 /* 5x */, 0x35 /* 5.25x */, 0x36 /* 5.5x */, 0x37 /* 5.75x */,
+	0x38 /* 6x */, 0x39 /* 6.25x */, 0x3a /* 6.5x */, 0x3b /* 6.75x */,
+	0x3c /* 7x */, 0x3d /* 7.25x */, 0x3e /* 7.5x */, 0x3f /* 7.75x */,
+	0x70 /* 8x */
+};
+
+/* Gain = (bit[8] + 1) * (bit[7] + 1) * (bit[6:0] * 0.03125) */
+static u16 micron1_gain[] = {
+	/* 1x   1.25x   1.5x    1.75x */
+	0x0020, 0x0028, 0x0030, 0x0038,
+	/* 2x   2.25x   2.5x    2.75x */
+	0x00a0, 0x00a4, 0x00a8, 0x00ac,
+	/* 3x   3.25x   3.5x    3.75x */
+	0x00b0, 0x00b4, 0x00b8, 0x00bc,
+	/* 4x   4.25x   4.5x    4.75x */
+	0x00c0, 0x00c4, 0x00c8, 0x00cc,
+	/* 5x   5.25x   5.5x    5.75x */
+	0x00d0, 0x00d4, 0x00d8, 0x00dc,
+	/* 6x   6.25x   6.5x    6.75x */
+	0x00e0, 0x00e4, 0x00e8, 0x00ec,
+	/* 7x   7.25x   7.5x    7.75x */
+	0x00f0, 0x00f4, 0x00f8, 0x00fc,
+	/* 8x */
+	0x01c0
+};
+
+/* mt9m001 sensor uses a different gain formula then other micron sensors */
+/* Gain = (bit[6] + 1) * (bit[5-0] * 0.125) */
+static u16 micron2_gain[] = {
+	/* 1x   1.25x   1.5x    1.75x */
+	0x0008, 0x000a, 0x000c, 0x000e,
+	/* 2x   2.25x   2.5x    2.75x */
+	0x0010, 0x0012, 0x0014, 0x0016,
+	/* 3x   3.25x   3.5x    3.75x */
+	0x0018, 0x001a, 0x001c, 0x001e,
+	/* 4x   4.25x   4.5x    4.75x */
+	0x0020, 0x0051, 0x0052, 0x0053,
+	/* 5x   5.25x   5.5x    5.75x */
+	0x0054, 0x0055, 0x0056, 0x0057,
+	/* 6x   6.25x   6.5x    6.75x */
+	0x0058, 0x0059, 0x005a, 0x005b,
+	/* 7x   7.25x   7.5x    7.75x */
+	0x005c, 0x005d, 0x005e, 0x005f,
+	/* 8x */
+	0x0060
+};
+
+/* Gain = .5 + bit[7:0] / 16 */
+static u8 hv7131r_gain[] = {
+	0x08 /* 1x */, 0x0c /* 1.25x */, 0x10 /* 1.5x */, 0x14 /* 1.75x */,
+	0x18 /* 2x */, 0x1c /* 2.25x */, 0x20 /* 2.5x */, 0x24 /* 2.75x */,
+	0x28 /* 3x */, 0x2c /* 3.25x */, 0x30 /* 3.5x */, 0x34 /* 3.75x */,
+	0x38 /* 4x */, 0x3c /* 4.25x */, 0x40 /* 4.5x */, 0x44 /* 4.75x */,
+	0x48 /* 5x */, 0x4c /* 5.25x */, 0x50 /* 5.5x */, 0x54 /* 5.75x */,
+	0x58 /* 6x */, 0x5c /* 6.25x */, 0x60 /* 6.5x */, 0x64 /* 6.75x */,
+	0x68 /* 7x */, 0x6c /* 7.25x */, 0x70 /* 7.5x */, 0x74 /* 7.75x */,
+	0x78 /* 8x */
+};
+
+static u8 soi968_init[][2] = {
+	{0x12, 0x80}, {0x0c, 0x00}, {0x0f, 0x1f},
+	{0x11, 0x80}, {0x38, 0x52}, {0x1e, 0x00},
+	{0x33, 0x08}, {0x35, 0x8c}, {0x36, 0x0c},
+	{0x37, 0x04}, {0x45, 0x04}, {0x47, 0xff},
+	{0x3e, 0x00}, {0x3f, 0x00}, {0x3b, 0x20},
+	{0x3a, 0x96}, {0x3d, 0x0a}, {0x14, 0x8e},
+	{0x13, 0x8a}, {0x12, 0x40}, {0x17, 0x13},
+	{0x18, 0x63}, {0x19, 0x01}, {0x1a, 0x79},
+	{0x32, 0x24}, {0x03, 0x00}, {0x11, 0x40},
+	{0x2a, 0x10}, {0x2b, 0xe0}, {0x10, 0x32},
+	{0x00, 0x00}, {0x01, 0x80}, {0x02, 0x80},
+};
+
+static u8 ov7660_init[][2] = {
+	{0x0e, 0x80}, {0x0d, 0x08}, {0x0f, 0xc3},
+	{0x04, 0xc3}, {0x10, 0x40}, {0x11, 0x40},
+	{0x12, 0x05}, {0x13, 0xba}, {0x14, 0x2a},
+	{0x37, 0x0f}, {0x38, 0x02}, {0x39, 0x43},
+	{0x3a, 0x00}, {0x69, 0x90}, {0x2d, 0xf6},
+	{0x2e, 0x0b}, {0x01, 0x78}, {0x02, 0x50},
+};
+
+static u8 ov7670_init[][2] = {
+	{0x12, 0x80}, {0x11, 0x80}, {0x3a, 0x04}, {0x12, 0x01},
+	{0x32, 0xb6}, {0x03, 0x0a}, {0x0c, 0x00}, {0x3e, 0x00},
+	{0x70, 0x3a}, {0x71, 0x35}, {0x72, 0x11}, {0x73, 0xf0},
+	{0xa2, 0x02}, {0x13, 0xe0}, {0x00, 0x00}, {0x10, 0x00},
+	{0x0d, 0x40}, {0x14, 0x28}, {0xa5, 0x05}, {0xab, 0x07},
+	{0x24, 0x95}, {0x25, 0x33}, {0x26, 0xe3}, {0x9f, 0x75},
+	{0xa0, 0x65}, {0xa1, 0x0b}, {0xa6, 0xd8}, {0xa7, 0xd8},
+	{0xa8, 0xf0}, {0xa9, 0x90}, {0xaa, 0x94}, {0x13, 0xe5},
+	{0x0e, 0x61}, {0x0f, 0x4b}, {0x16, 0x02}, {0x1e, 0x27},
+	{0x21, 0x02}, {0x22, 0x91}, {0x29, 0x07}, {0x33, 0x0b},
+	{0x35, 0x0b}, {0x37, 0x1d}, {0x38, 0x71}, {0x39, 0x2a},
+	{0x3c, 0x78}, {0x4d, 0x40}, {0x4e, 0x20}, {0x69, 0x00},
+	{0x74, 0x19}, {0x8d, 0x4f}, {0x8e, 0x00}, {0x8f, 0x00},
+	{0x90, 0x00}, {0x91, 0x00}, {0x96, 0x00}, {0x9a, 0x80},
+	{0xb0, 0x84}, {0xb1, 0x0c}, {0xb2, 0x0e}, {0xb3, 0x82},
+	{0xb8, 0x0a}, {0x43, 0x0a}, {0x44, 0xf0}, {0x45, 0x20},
+	{0x46, 0x7d}, {0x47, 0x29}, {0x48, 0x4a}, {0x59, 0x8c},
+	{0x5a, 0xa5}, {0x5b, 0xde}, {0x5c, 0x96}, {0x5d, 0x66},
+	{0x5e, 0x10}, {0x6c, 0x0a}, {0x6d, 0x55}, {0x6e, 0x11},
+	{0x6f, 0x9e}, {0x6a, 0x40}, {0x01, 0x40}, {0x02, 0x40},
+	{0x13, 0xe7}, {0x4f, 0x6e}, {0x50, 0x70}, {0x51, 0x02},
+	{0x52, 0x1d}, {0x53, 0x56}, {0x54, 0x73}, {0x55, 0x0a},
+	{0x56, 0x55}, {0x57, 0x80}, {0x58, 0x9e}, {0x41, 0x08},
+	{0x3f, 0x02}, {0x75, 0x03}, {0x76, 0x63}, {0x4c, 0x04},
+	{0x77, 0x06}, {0x3d, 0x02}, {0x4b, 0x09}, {0xc9, 0x30},
+	{0x41, 0x08}, {0x56, 0x48}, {0x34, 0x11}, {0xa4, 0x88},
+	{0x96, 0x00}, {0x97, 0x30}, {0x98, 0x20}, {0x99, 0x30},
+	{0x9a, 0x84}, {0x9b, 0x29}, {0x9c, 0x03}, {0x9d, 0x99},
+	{0x9e, 0x7f}, {0x78, 0x04}, {0x79, 0x01}, {0xc8, 0xf0},
+	{0x79, 0x0f}, {0xc8, 0x00}, {0x79, 0x10}, {0xc8, 0x7e},
+	{0x79, 0x0a}, {0xc8, 0x80}, {0x79, 0x0b}, {0xc8, 0x01},
+	{0x79, 0x0c}, {0xc8, 0x0f}, {0x79, 0x0d}, {0xc8, 0x20},
+	{0x79, 0x09}, {0xc8, 0x80}, {0x79, 0x02}, {0xc8, 0xc0},
+	{0x79, 0x03}, {0xc8, 0x40}, {0x79, 0x05}, {0xc8, 0x30},
+	{0x79, 0x26}, {0x62, 0x20}, {0x63, 0x00}, {0x64, 0x06},
+	{0x65, 0x00}, {0x66, 0x05}, {0x94, 0x05}, {0x95, 0x0a},
+	{0x17, 0x13}, {0x18, 0x01}, {0x19, 0x02}, {0x1a, 0x7a},
+	{0x46, 0x59}, {0x47, 0x30}, {0x58, 0x9a}, {0x59, 0x84},
+	{0x5a, 0x91}, {0x5b, 0x57}, {0x5c, 0x75}, {0x5d, 0x6d},
+	{0x5e, 0x13}, {0x64, 0x07}, {0x94, 0x07}, {0x95, 0x0d},
+	{0xa6, 0xdf}, {0xa7, 0xdf}, {0x48, 0x4d}, {0x51, 0x00},
+	{0x6b, 0x0a}, {0x11, 0x80}, {0x2a, 0x00}, {0x2b, 0x00},
+	{0x92, 0x00}, {0x93, 0x00}, {0x55, 0x0a}, {0x56, 0x60},
+	{0x4f, 0x6e}, {0x50, 0x70}, {0x51, 0x00}, {0x52, 0x1d},
+	{0x53, 0x56}, {0x54, 0x73}, {0x58, 0x9a}, {0x4f, 0x6e},
+	{0x50, 0x70}, {0x51, 0x00}, {0x52, 0x1d}, {0x53, 0x56},
+	{0x54, 0x73}, {0x58, 0x9a}, {0x3f, 0x01}, {0x7b, 0x03},
+	{0x7c, 0x09}, {0x7d, 0x16}, {0x7e, 0x38}, {0x7f, 0x47},
+	{0x80, 0x53}, {0x81, 0x5e}, {0x82, 0x6a}, {0x83, 0x74},
+	{0x84, 0x80}, {0x85, 0x8c}, {0x86, 0x9b}, {0x87, 0xb2},
+	{0x88, 0xcc}, {0x89, 0xe5}, {0x7a, 0x24}, {0x3b, 0x00},
+	{0x9f, 0x76}, {0xa0, 0x65}, {0x13, 0xe2}, {0x6b, 0x0a},
+	{0x11, 0x80}, {0x2a, 0x00}, {0x2b, 0x00}, {0x92, 0x00},
+	{0x93, 0x00},
+};
+
+static u8 ov9650_init[][2] = {
+	{0x12, 0x80}, {0x00, 0x00}, {0x01, 0x78},
+	{0x02, 0x78}, {0x03, 0x36}, {0x04, 0x03},
+	{0x05, 0x00}, {0x06, 0x00}, {0x08, 0x00},
+	{0x09, 0x01}, {0x0c, 0x00}, {0x0d, 0x00},
+	{0x0e, 0xa0}, {0x0f, 0x52}, {0x10, 0x7c},
+	{0x11, 0x80}, {0x12, 0x45}, {0x13, 0xc2},
+	{0x14, 0x2e}, {0x15, 0x00}, {0x16, 0x07},
+	{0x17, 0x24}, {0x18, 0xc5}, {0x19, 0x00},
+	{0x1a, 0x3c}, {0x1b, 0x00}, {0x1e, 0x04},
+	{0x1f, 0x00}, {0x24, 0x78}, {0x25, 0x68},
+	{0x26, 0xd4}, {0x27, 0x80}, {0x28, 0x80},
+	{0x29, 0x30}, {0x2a, 0x00}, {0x2b, 0x00},
+	{0x2c, 0x80}, {0x2d, 0x00}, {0x2e, 0x00},
+	{0x2f, 0x00}, {0x30, 0x08}, {0x31, 0x30},
+	{0x32, 0x84}, {0x33, 0xe2}, {0x34, 0xbf},
+	{0x35, 0x81}, {0x36, 0xf9}, {0x37, 0x00},
+	{0x38, 0x93}, {0x39, 0x50}, {0x3a, 0x01},
+	{0x3b, 0x01}, {0x3c, 0x73}, {0x3d, 0x19},
+	{0x3e, 0x0b}, {0x3f, 0x80}, {0x40, 0xc1},
+	{0x41, 0x00}, {0x42, 0x08}, {0x67, 0x80},
+	{0x68, 0x80}, {0x69, 0x40}, {0x6a, 0x00},
+	{0x6b, 0x0a}, {0x8b, 0x06}, {0x8c, 0x20},
+	{0x8d, 0x00}, {0x8e, 0x00}, {0x8f, 0xdf},
+	{0x92, 0x00}, {0x93, 0x00}, {0x94, 0x88},
+	{0x95, 0x88}, {0x96, 0x04}, {0xa1, 0x00},
+	{0xa5, 0x80}, {0xa8, 0x80}, {0xa9, 0xb8},
+	{0xaa, 0x92}, {0xab, 0x0a},
+};
+
+static u8 ov9655_init[][2] = {
+	{0x12, 0x80}, {0x12, 0x01}, {0x0d, 0x00}, {0x0e, 0x61},
+	{0x11, 0x80}, {0x13, 0xba}, {0x14, 0x2e}, {0x16, 0x24},
+	{0x1e, 0x04}, {0x1e, 0x04}, {0x1e, 0x04}, {0x27, 0x08},
+	{0x28, 0x08}, {0x29, 0x15}, {0x2c, 0x08}, {0x32, 0xbf},
+	{0x34, 0x3d}, {0x35, 0x00}, {0x36, 0xf8}, {0x38, 0x12},
+	{0x39, 0x57}, {0x3a, 0x00}, {0x3b, 0xcc}, {0x3c, 0x0c},
+	{0x3d, 0x19}, {0x3e, 0x0c}, {0x3f, 0x01}, {0x41, 0x40},
+	{0x42, 0x80}, {0x45, 0x46}, {0x46, 0x62}, {0x47, 0x2a},
+	{0x48, 0x3c}, {0x4a, 0xf0}, {0x4b, 0xdc}, {0x4c, 0xdc},
+	{0x4d, 0xdc}, {0x4e, 0xdc}, {0x69, 0x02}, {0x6c, 0x04},
+	{0x6f, 0x9e}, {0x70, 0x05}, {0x71, 0x78}, {0x77, 0x02},
+	{0x8a, 0x23}, {0x8c, 0x0d}, {0x90, 0x7e}, {0x91, 0x7c},
+	{0x9f, 0x6e}, {0xa0, 0x6e}, {0xa5, 0x68}, {0xa6, 0x60},
+	{0xa8, 0xc1}, {0xa9, 0xfa}, {0xaa, 0x92}, {0xab, 0x04},
+	{0xac, 0x80}, {0xad, 0x80}, {0xae, 0x80}, {0xaf, 0x80},
+	{0xb2, 0xf2}, {0xb3, 0x20}, {0xb5, 0x00}, {0xb6, 0xaf},
+	{0xbb, 0xae}, {0xbc, 0x44}, {0xbd, 0x44}, {0xbe, 0x3b},
+	{0xbf, 0x3a}, {0xc0, 0xe2}, {0xc1, 0xc8}, {0xc2, 0x01},
+	{0xc4, 0x00}, {0xc6, 0x85}, {0xc7, 0x81}, {0xc9, 0xe0},
+	{0xca, 0xe8}, {0xcc, 0xd8}, {0xcd, 0x93}, {0x12, 0x61},
+	{0x36, 0xfa}, {0x8c, 0x8d}, {0xc0, 0xaa}, {0x69, 0x0a},
+	{0x03, 0x12}, {0x17, 0x14}, {0x18, 0x00}, {0x19, 0x01},
+	{0x1a, 0x3d}, {0x32, 0xbf}, {0x11, 0x80}, {0x2a, 0x10},
+	{0x2b, 0x0a}, {0x92, 0x00}, {0x93, 0x00}, {0x1e, 0x04},
+	{0x1e, 0x04}, {0x10, 0x7c}, {0x04, 0x03}, {0xa1, 0x00},
+	{0x2d, 0x00}, {0x2e, 0x00}, {0x00, 0x00}, {0x01, 0x80},
+	{0x02, 0x80}, {0x12, 0x61}, {0x36, 0xfa}, {0x8c, 0x8d},
+	{0xc0, 0xaa}, {0x69, 0x0a}, {0x03, 0x12}, {0x17, 0x14},
+	{0x18, 0x00}, {0x19, 0x01}, {0x1a, 0x3d}, {0x32, 0xbf},
+	{0x11, 0x80}, {0x2a, 0x10}, {0x2b, 0x0a}, {0x92, 0x00},
+	{0x93, 0x00}, {0x04, 0x01}, {0x10, 0x1f}, {0xa1, 0x00},
+	{0x00, 0x0a}, {0xa1, 0x00}, {0x10, 0x5d}, {0x04, 0x03},
+	{0x00, 0x01}, {0xa1, 0x00}, {0x10, 0x7c}, {0x04, 0x03},
+	{0x00, 0x03}, {0x00, 0x0a}, {0x00, 0x10}, {0x00, 0x13},
+};
+
+static u16 mt9v112_init[][2] = {
+	{0xf0, 0x0000}, {0x0d, 0x0021}, {0x0d, 0x0020},
+	{0x34, 0xc019}, {0x0a, 0x0011}, {0x0b, 0x000b},
+	{0x20, 0x0703}, {0x35, 0x2022}, {0xf0, 0x0001},
+	{0x05, 0x0000}, {0x06, 0x340c}, {0x3b, 0x042a},
+	{0x3c, 0x0400}, {0xf0, 0x0002}, {0x2e, 0x0c58},
+	{0x5b, 0x0001}, {0xc8, 0x9f0b}, {0xf0, 0x0001},
+	{0x9b, 0x5300}, {0xf0, 0x0000}, {0x2b, 0x0020},
+	{0x2c, 0x002a}, {0x2d, 0x0032}, {0x2e, 0x0020},
+	{0x09, 0x01dc}, {0x01, 0x000c}, {0x02, 0x0020},
+	{0x03, 0x01e0}, {0x04, 0x0280}, {0x06, 0x000c},
+	{0x05, 0x0098}, {0x20, 0x0703}, {0x09, 0x01f2},
+	{0x2b, 0x00a0}, {0x2c, 0x00a0}, {0x2d, 0x00a0},
+	{0x2e, 0x00a0}, {0x01, 0x000c}, {0x02, 0x0020},
+	{0x03, 0x01e0}, {0x04, 0x0280}, {0x06, 0x000c},
+	{0x05, 0x0098}, {0x09, 0x01c1}, {0x2b, 0x00ae},
+	{0x2c, 0x00ae}, {0x2d, 0x00ae}, {0x2e, 0x00ae},
+};
+
+static u16 mt9v111_init[][2] = {
+	{0x01, 0x0004}, {0x0d, 0x0001}, {0x0d, 0x0000},
+	{0x01, 0x0001}, {0x02, 0x0016}, {0x03, 0x01e1},
+	{0x04, 0x0281}, {0x05, 0x0004}, {0x07, 0x3002},
+	{0x21, 0x0000}, {0x25, 0x4024}, {0x26, 0xff03},
+	{0x27, 0xff10}, {0x2b, 0x7828}, {0x2c, 0xb43c},
+	{0x2d, 0xf0a0},	{0x2e, 0x0c64},	{0x2f, 0x0064},
+	{0x67, 0x4010},	{0x06, 0x301e},	{0x08, 0x0480},
+	{0x01, 0x0004},	{0x02, 0x0016}, {0x03, 0x01e6},
+	{0x04, 0x0286},	{0x05, 0x0004}, {0x06, 0x0000},
+	{0x07, 0x3002},	{0x08, 0x0008}, {0x0c, 0x0000},
+	{0x0d, 0x0000}, {0x0e, 0x0000}, {0x0f, 0x0000},
+	{0x10, 0x0000},	{0x11, 0x0000},	{0x12, 0x00b0},
+	{0x13, 0x007c},	{0x14, 0x0000}, {0x15, 0x0000},
+	{0x16, 0x0000}, {0x17, 0x0000},	{0x18, 0x0000},
+	{0x19, 0x0000},	{0x1a, 0x0000},	{0x1b, 0x0000},
+	{0x1c, 0x0000},	{0x1d, 0x0000},	{0x30, 0x0000},
+	{0x30, 0x0005},	{0x31, 0x0000},	{0x02, 0x0016},
+	{0x03, 0x01e1},	{0x04, 0x0281}, {0x05, 0x0004},
+	{0x06, 0x0000},	{0x07, 0x3002},	{0x06, 0x002d},
+	{0x05, 0x0004},	{0x09, 0x0064},	{0x2b, 0x00a0},
+	{0x2c, 0x00a0},	{0x2d, 0x00a0},	{0x2e, 0x00a0},
+	{0x02, 0x0016},	{0x03, 0x01e1},	{0x04, 0x0281},
+	{0x05, 0x0004},	{0x06, 0x002d},	{0x07, 0x3002},
+	{0x0e, 0x0008},	{0x06, 0x002d},	{0x05, 0x0004},
+};
+
+static u16 mt9v011_init[][2] = {
+	{0x07, 0x0002},	{0x0d, 0x0001},	{0x0d, 0x0000},
+	{0x01, 0x0008},	{0x02, 0x0016},	{0x03, 0x01e1},
+	{0x04, 0x0281},	{0x05, 0x0083},	{0x06, 0x0006},
+	{0x0d, 0x0002}, {0x0a, 0x0000},	{0x0b, 0x0000},
+	{0x0c, 0x0000},	{0x0d, 0x0000},	{0x0e, 0x0000},
+	{0x0f, 0x0000},	{0x10, 0x0000},	{0x11, 0x0000},
+	{0x12, 0x0000},	{0x13, 0x0000},	{0x14, 0x0000},
+	{0x15, 0x0000},	{0x16, 0x0000},	{0x17, 0x0000},
+	{0x18, 0x0000},	{0x19, 0x0000},	{0x1a, 0x0000},
+	{0x1b, 0x0000},	{0x1c, 0x0000},	{0x1d, 0x0000},
+	{0x32, 0x0000},	{0x20, 0x1101},	{0x21, 0x0000},
+	{0x22, 0x0000},	{0x23, 0x0000},	{0x24, 0x0000},
+	{0x25, 0x0000},	{0x26, 0x0000},	{0x27, 0x0024},
+	{0x2f, 0xf7b0},	{0x30, 0x0005},	{0x31, 0x0000},
+	{0x32, 0x0000},	{0x33, 0x0000},	{0x34, 0x0100},
+	{0x3d, 0x068f},	{0x40, 0x01e0},	{0x41, 0x00d1},
+	{0x44, 0x0082},	{0x5a, 0x0000},	{0x5b, 0x0000},
+	{0x5c, 0x0000},	{0x5d, 0x0000},	{0x5e, 0x0000},
+	{0x5f, 0xa31d},	{0x62, 0x0611},	{0x0a, 0x0000},
+	{0x06, 0x0029},	{0x05, 0x0009},	{0x20, 0x1101},
+	{0x20, 0x1101},	{0x09, 0x0064},	{0x07, 0x0003},
+	{0x2b, 0x0033},	{0x2c, 0x00a0},	{0x2d, 0x00a0},
+	{0x2e, 0x0033},	{0x07, 0x0002},	{0x06, 0x0000},
+	{0x06, 0x0029},	{0x05, 0x0009},
+};
+
+static u16 mt9m001_init[][2] = {
+	{0x0d, 0x0001}, {0x0d, 0x0000}, {0x01, 0x000e},
+	{0x02, 0x0014}, {0x03, 0x03c1}, {0x04, 0x0501},
+	{0x05, 0x0083}, {0x06, 0x0006}, {0x0d, 0x0002},
+	{0x0a, 0x0000}, {0x0c, 0x0000}, {0x11, 0x0000},
+	{0x1e, 0x8000}, {0x5f, 0x8904}, {0x60, 0x0000},
+	{0x61, 0x0000}, {0x62, 0x0498}, {0x63, 0x0000},
+	{0x64, 0x0000}, {0x20, 0x111d}, {0x06, 0x00f2},
+	{0x05, 0x0013}, {0x09, 0x10f2}, {0x07, 0x0003},
+	{0x2b, 0x002a}, {0x2d, 0x002a}, {0x2c, 0x002a},
+	{0x2e, 0x0029}, {0x07, 0x0002},
+};
+
+static u16 mt9m111_init[][2] = {
+	{0xf0, 0x0000}, {0x0d, 0x0008}, {0x0d, 0x0009},
+	{0x0d, 0x0008}, {0xf0, 0x0001}, {0x3a, 0x4300},
+	{0x9b, 0x4300}, {0xa1, 0x0280}, {0xa4, 0x0200},
+	{0x06, 0x308e}, {0xf0, 0x0000},
+};
+
+static u8 hv7131r_init[][2] = {
+	{0x02, 0x08}, {0x02, 0x00}, {0x01, 0x08},
+	{0x02, 0x00}, {0x20, 0x00}, {0x21, 0xd0},
+	{0x22, 0x00}, {0x23, 0x09}, {0x01, 0x08},
+	{0x01, 0x08}, {0x01, 0x08}, {0x25, 0x07},
+	{0x26, 0xc3}, {0x27, 0x50}, {0x30, 0x62},
+	{0x31, 0x10}, {0x32, 0x06}, {0x33, 0x10},
+	{0x20, 0x00}, {0x21, 0xd0}, {0x22, 0x00},
+	{0x23, 0x09}, {0x01, 0x08},
+};
+
+int reg_r(struct gspca_dev *gspca_dev, u16 reg, u16 length)
+{
+	struct usb_device *dev = gspca_dev->dev;
+	int result;
+	result = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0),
+			0x00,
+			USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+			reg,
+			0x00,
+			gspca_dev->usb_buf,
+			length,
+			500);
+	if (unlikely(result < 0 || result != length)) {
+		err("Read register failed 0x%02X", reg);
+		return -EIO;
+	}
+	return 0;
+}
+
+int reg_w(struct gspca_dev *gspca_dev, u16 reg, const u8 *buffer, int length)
+{
+	struct usb_device *dev = gspca_dev->dev;
+	int result;
+	memcpy(gspca_dev->usb_buf, buffer, length);
+	result = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
+			0x08,
+			USB_DIR_OUT | USB_TYPE_VENDOR | USB_RECIP_INTERFACE,
+			reg,
+			0x00,
+			gspca_dev->usb_buf,
+			length,
+			500);
+	if (unlikely(result < 0 || result != length)) {
+		err("Write register failed index 0x%02X", reg);
+		return -EIO;
+	}
+	return 0;
+}
+
+int reg_w1(struct gspca_dev *gspca_dev, u16 reg, const u8 value)
+{
+	u8 data[1] = {value};
+	return reg_w(gspca_dev, reg, data, 1);
+}
+
+int i2c_w(struct gspca_dev *gspca_dev, const u8 *buffer)
+{
+	int i;
+	reg_w(gspca_dev, 0x10c0, buffer, 8);
+	for (i = 0; i < 5; i++) {
+		reg_r(gspca_dev, 0x10c0, 1);
+		if (gspca_dev->usb_buf[0] & 0x04) {
+			if (gspca_dev->usb_buf[0] & 0x08)
+				return -1;
+			return 0;
+		}
+		msleep(1);
+	}
+	return -1;
+}
+
+int i2c_w1(struct gspca_dev *gspca_dev, u8 reg, u8 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	u8 row[8];
+
+	/*
+	 * from the point of view of the bridge, the length
+	 * includes the address
+	 */
+	row[0] = 0x81 | (2 << 4);
+	row[1] = sd->i2c_addr;
+	row[2] = reg;
+	row[3] = val;
+	row[4] = 0x00;
+	row[5] = 0x00;
+	row[6] = 0x00;
+	row[7] = 0x10;
+
+	return i2c_w(gspca_dev, row);
+}
+
+int i2c_w2(struct gspca_dev *gspca_dev, u8 reg, u16 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	u8 row[8];
+
+	/*
+	 * from the point of view of the bridge, the length
+	 * includes the address
+	 */
+	row[0] = 0x81 | (3 << 4);
+	row[1] = sd->i2c_addr;
+	row[2] = reg;
+	row[3] = (val >> 8) & 0xff;
+	row[4] = val & 0xff;
+	row[5] = 0x00;
+	row[6] = 0x00;
+	row[7] = 0x10;
+
+	return i2c_w(gspca_dev, row);
+}
+
+int i2c_r1(struct gspca_dev *gspca_dev, u8 reg, u8 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	u8 row[8];
+
+	row[0] = 0x81 | 0x10;
+	row[1] = sd->i2c_addr;
+	row[2] = reg;
+	row[3] = 0;
+	row[4] = 0;
+	row[5] = 0;
+	row[6] = 0;
+	row[7] = 0x10;
+	reg_w(gspca_dev, 0x10c0, row, 8);
+	msleep(1);
+	row[0] = 0x81 | (2 << 4) | 0x02;
+	row[2] = 0;
+	reg_w(gspca_dev, 0x10c0, row, 8);
+	msleep(1);
+	reg_r(gspca_dev, 0x10c2, 5);
+	*val = gspca_dev->usb_buf[3];
+	return 0;
+}
+
+int i2c_r2(struct gspca_dev *gspca_dev, u8 reg, u16 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	u8 row[8];
+
+	row[0] = 0x81 | 0x10;
+	row[1] = sd->i2c_addr;
+	row[2] = reg;
+	row[3] = 0;
+	row[4] = 0;
+	row[5] = 0;
+	row[6] = 0;
+	row[7] = 0x10;
+	reg_w(gspca_dev, 0x10c0, row, 8);
+	msleep(1);
+	row[0] = 0x81 | (3 << 4) | 0x02;
+	row[2] = 0;
+	reg_w(gspca_dev, 0x10c0, row, 8);
+	msleep(1);
+	reg_r(gspca_dev, 0x10c2, 5);
+	*val = (gspca_dev->usb_buf[2] << 8) | gspca_dev->usb_buf[3];
+	return 0;
+}
+
+static int ov9650_init_sensor(struct gspca_dev *gspca_dev)
+{
+	int i;
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	for (i = 0; i < ARRAY_SIZE(ov9650_init); i++) {
+		if (i2c_w1(gspca_dev, ov9650_init[i][0],
+				ov9650_init[i][1]) < 0) {
+			err("OV9650 sensor initialization failed");
+			return -ENODEV;
+		}
+	}
+	sd->hstart = 1;
+	sd->vstart = 7;
+	return 0;
+}
+
+static int ov9655_init_sensor(struct gspca_dev *gspca_dev)
+{
+	int i;
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	for (i = 0; i < ARRAY_SIZE(ov9655_init); i++) {
+		if (i2c_w1(gspca_dev, ov9655_init[i][0],
+				ov9655_init[i][1]) < 0) {
+			err("OV9655 sensor initialization failed");
+			return -ENODEV;
+		}
+	}
+	/* disable hflip and vflip */
+	gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
+	sd->hstart = 0;
+	sd->vstart = 7;
+	return 0;
+}
+
+static int soi968_init_sensor(struct gspca_dev *gspca_dev)
+{
+	int i;
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	for (i = 0; i < ARRAY_SIZE(soi968_init); i++) {
+		if (i2c_w1(gspca_dev, soi968_init[i][0],
+				soi968_init[i][1]) < 0) {
+			err("SOI968 sensor initialization failed");
+			return -ENODEV;
+		}
+	}
+	/* disable hflip and vflip */
+	gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
+	sd->hstart = 60;
+	sd->vstart = 11;
+	return 0;
+}
+
+static int ov7660_init_sensor(struct gspca_dev *gspca_dev)
+{
+	int i;
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	for (i = 0; i < ARRAY_SIZE(ov7660_init); i++) {
+		if (i2c_w1(gspca_dev, ov7660_init[i][0],
+				ov7660_init[i][1]) < 0) {
+			err("OV7660 sensor initialization failed");
+			return -ENODEV;
+		}
+	}
+	/* disable hflip and vflip */
+	gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
+	sd->hstart = 1;
+	sd->vstart = 1;
+	return 0;
+}
+
+static int ov7670_init_sensor(struct gspca_dev *gspca_dev)
+{
+	int i;
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	for (i = 0; i < ARRAY_SIZE(ov7670_init); i++) {
+		if (i2c_w1(gspca_dev, ov7670_init[i][0],
+				ov7670_init[i][1]) < 0) {
+			err("OV7670 sensor initialization failed");
+			return -ENODEV;
+		}
+	}
+	/* disable hflip and vflip */
+	gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
+	sd->hstart = 0;
+	sd->vstart = 1;
+	return 0;
+}
+
+static int mt9v_init_sensor(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int i;
+	u16 value;
+	int ret;
+
+	sd->i2c_addr = 0x5d;
+	ret = i2c_r2(gspca_dev, 0xff, &value);
+	if ((ret == 0) && (value == 0x8243)) {
+		for (i = 0; i < ARRAY_SIZE(mt9v011_init); i++) {
+			if (i2c_w2(gspca_dev, mt9v011_init[i][0],
+					mt9v011_init[i][1]) < 0) {
+				err("MT9V011 sensor initialization failed");
+				return -ENODEV;
+			}
+		}
+		sd->hstart = 2;
+		sd->vstart = 2;
+		sd->sensor = SENSOR_MT9V011;
+		info("MT9V011 sensor detected");
+		return 0;
+	}
+
+	sd->i2c_addr = 0x5c;
+	i2c_w2(gspca_dev, 0x01, 0x0004);
+	ret = i2c_r2(gspca_dev, 0xff, &value);
+	if ((ret == 0) && (value == 0x823a)) {
+		for (i = 0; i < ARRAY_SIZE(mt9v111_init); i++) {
+			if (i2c_w2(gspca_dev, mt9v111_init[i][0],
+					mt9v111_init[i][1]) < 0) {
+				err("MT9V111 sensor initialization failed");
+				return -ENODEV;
+			}
+		}
+		sd->hstart = 2;
+		sd->vstart = 2;
+		sd->sensor = SENSOR_MT9V111;
+		info("MT9V111 sensor detected");
+		return 0;
+	}
+
+	sd->i2c_addr = 0x5d;
+	ret = i2c_w2(gspca_dev, 0xf0, 0x0000);
+	if (ret < 0) {
+		sd->i2c_addr = 0x48;
+		i2c_w2(gspca_dev, 0xf0, 0x0000);
+	}
+	ret = i2c_r2(gspca_dev, 0x00, &value);
+	if ((ret == 0) && (value == 0x1229)) {
+		for (i = 0; i < ARRAY_SIZE(mt9v112_init); i++) {
+			if (i2c_w2(gspca_dev, mt9v112_init[i][0],
+					mt9v112_init[i][1]) < 0) {
+				err("MT9V112 sensor initialization failed");
+				return -ENODEV;
+			}
+		}
+		sd->hstart = 6;
+		sd->vstart = 2;
+		sd->sensor = SENSOR_MT9V112;
+		info("MT9V112 sensor detected");
+		return 0;
+	}
+
+	return -ENODEV;
+}
+
+static int mt9m111_init_sensor(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int i;
+	for (i = 0; i < ARRAY_SIZE(mt9m111_init); i++) {
+		if (i2c_w2(gspca_dev, mt9m111_init[i][0],
+				mt9m111_init[i][1]) < 0) {
+			err("MT9M111 sensor initialization failed");
+			return -ENODEV;
+		}
+	}
+	sd->hstart = 0;
+	sd->vstart = 2;
+	return 0;
+}
+
+static int mt9m001_init_sensor(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int i;
+	for (i = 0; i < ARRAY_SIZE(mt9m001_init); i++) {
+		if (i2c_w2(gspca_dev, mt9m001_init[i][0],
+				mt9m001_init[i][1]) < 0) {
+			err("MT9M001 sensor initialization failed");
+			return -ENODEV;
+		}
+	}
+	/* disable hflip and vflip */
+	gspca_dev->ctrl_dis = (1 << HFLIP_IDX) | (1 << VFLIP_IDX);
+	sd->hstart = 2;
+	sd->vstart = 2;
+	return 0;
+}
+
+static int hv7131r_init_sensor(struct gspca_dev *gspca_dev)
+{
+	int i;
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	for (i = 0; i < ARRAY_SIZE(hv7131r_init); i++) {
+		if (i2c_w1(gspca_dev, hv7131r_init[i][0],
+				hv7131r_init[i][1]) < 0) {
+			err("HV7131R Sensor initialization failed");
+			return -ENODEV;
+		}
+	}
+	sd->hstart = 0;
+	sd->vstart = 1;
+	return 0;
+}
+
+#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV
+static int input_kthread(void *data)
+{
+	struct gspca_dev *gspca_dev = (struct gspca_dev *)data;
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	DECLARE_WAIT_QUEUE_HEAD(wait);
+	set_freezable();
+	for (;;) {
+		if (kthread_should_stop())
+			break;
+
+		if (reg_r(gspca_dev, 0x1005, 1) < 0)
+			continue;
+
+		input_report_key(sd->input_dev,
+				 KEY_CAMERA,
+				 gspca_dev->usb_buf[0] & sd->input_gpio);
+		input_sync(sd->input_dev);
+
+		wait_event_freezable_timeout(wait,
+					     kthread_should_stop(),
+					     msecs_to_jiffies(100));
+	}
+	return 0;
+}
+
+
+static int sn9c20x_input_init(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	if (sd->input_gpio == 0)
+		return 0;
+
+	sd->input_dev = input_allocate_device();
+	if (!sd->input_dev)
+		return -ENOMEM;
+
+	sd->input_dev->name = "SN9C20X Webcam";
+
+	sd->input_dev->phys = kasprintf(GFP_KERNEL, "usb-%s-%s",
+					 gspca_dev->dev->bus->bus_name,
+					 gspca_dev->dev->devpath);
+
+	if (!sd->input_dev->phys)
+		return -ENOMEM;
+
+	usb_to_input_id(gspca_dev->dev, &sd->input_dev->id);
+	sd->input_dev->dev.parent = &gspca_dev->dev->dev;
+
+	set_bit(EV_KEY, sd->input_dev->evbit);
+	set_bit(KEY_CAMERA, sd->input_dev->keybit);
+
+	if (input_register_device(sd->input_dev))
+		return -EINVAL;
+
+	sd->input_task = kthread_run(input_kthread, gspca_dev, "sn9c20x/%d",
+				     gspca_dev->vdev.minor);
+
+	if (IS_ERR(sd->input_task))
+		return -EINVAL;
+
+	return 0;
+}
+
+static void sn9c20x_input_cleanup(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	if (sd->input_task != NULL && !IS_ERR(sd->input_task))
+		kthread_stop(sd->input_task);
+
+	if (sd->input_dev != NULL) {
+		input_unregister_device(sd->input_dev);
+		kfree(sd->input_dev->phys);
+		input_free_device(sd->input_dev);
+		sd->input_dev = NULL;
+	}
+}
+#endif
+
+static int set_cmatrix(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	s32 hue_coord, hue_index = 180 + sd->hue;
+	u8 cmatrix[21];
+	memset(cmatrix, 0, 21);
+
+	cmatrix[2] = (sd->contrast * 0x25 / 0x100) + 0x26;
+	cmatrix[0] = 0x13 + (cmatrix[2] - 0x26) * 0x13 / 0x25;
+	cmatrix[4] = 0x07 + (cmatrix[2] - 0x26) * 0x07 / 0x25;
+	cmatrix[18] = sd->brightness - 0x80;
+
+	hue_coord = (hsv_red_x[hue_index] * sd->saturation) >> 8;
+	cmatrix[6] = (unsigned char)(hue_coord & 0xff);
+	cmatrix[7] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+	hue_coord = (hsv_red_y[hue_index] * sd->saturation) >> 8;
+	cmatrix[8] = (unsigned char)(hue_coord & 0xff);
+	cmatrix[9] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+	hue_coord = (hsv_green_x[hue_index] * sd->saturation) >> 8;
+	cmatrix[10] = (unsigned char)(hue_coord & 0xff);
+	cmatrix[11] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+	hue_coord = (hsv_green_y[hue_index] * sd->saturation) >> 8;
+	cmatrix[12] = (unsigned char)(hue_coord & 0xff);
+	cmatrix[13] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+	hue_coord = (hsv_blue_x[hue_index] * sd->saturation) >> 8;
+	cmatrix[14] = (unsigned char)(hue_coord & 0xff);
+	cmatrix[15] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+	hue_coord = (hsv_blue_y[hue_index] * sd->saturation) >> 8;
+	cmatrix[16] = (unsigned char)(hue_coord & 0xff);
+	cmatrix[17] = (unsigned char)((hue_coord >> 8) & 0x0f);
+
+	return reg_w(gspca_dev, 0x10e1, cmatrix, 21);
+}
+
+static int set_gamma(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	u8 gamma[17];
+	u8 gval = sd->gamma * 0xb8 / 0x100;
+
+
+	gamma[0] = 0x0a;
+	gamma[1] = 0x13 + (gval * (0xcb - 0x13) / 0xb8);
+	gamma[2] = 0x25 + (gval * (0xee - 0x25) / 0xb8);
+	gamma[3] = 0x37 + (gval * (0xfa - 0x37) / 0xb8);
+	gamma[4] = 0x45 + (gval * (0xfc - 0x45) / 0xb8);
+	gamma[5] = 0x55 + (gval * (0xfb - 0x55) / 0xb8);
+	gamma[6] = 0x65 + (gval * (0xfc - 0x65) / 0xb8);
+	gamma[7] = 0x74 + (gval * (0xfd - 0x74) / 0xb8);
+	gamma[8] = 0x83 + (gval * (0xfe - 0x83) / 0xb8);
+	gamma[9] = 0x92 + (gval * (0xfc - 0x92) / 0xb8);
+	gamma[10] = 0xa1 + (gval * (0xfc - 0xa1) / 0xb8);
+	gamma[11] = 0xb0 + (gval * (0xfc - 0xb0) / 0xb8);
+	gamma[12] = 0xbf + (gval * (0xfb - 0xbf) / 0xb8);
+	gamma[13] = 0xce + (gval * (0xfb - 0xce) / 0xb8);
+	gamma[14] = 0xdf + (gval * (0xfd - 0xdf) / 0xb8);
+	gamma[15] = 0xea + (gval * (0xf9 - 0xea) / 0xb8);
+	gamma[16] = 0xf5;
+
+	return reg_w(gspca_dev, 0x1190, gamma, 17);
+}
+
+static int set_redblue(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	reg_w1(gspca_dev, 0x118c, sd->red);
+	reg_w1(gspca_dev, 0x118f, sd->blue);
+	return 0;
+}
+
+static int set_hvflip(struct gspca_dev *gspca_dev)
+{
+	u8 value, tslb;
+	u16 value2;
+	struct sd *sd = (struct sd *) gspca_dev;
+	switch (sd->sensor) {
+	case SENSOR_OV9650:
+		i2c_r1(gspca_dev, 0x1e, &value);
+		value &= ~0x30;
+		tslb = 0x01;
+		if (sd->hflip)
+			value |= 0x20;
+		if (sd->vflip) {
+			value |= 0x10;
+			tslb = 0x49;
+		}
+		i2c_w1(gspca_dev, 0x1e, value);
+		i2c_w1(gspca_dev, 0x3a, tslb);
+		break;
+	case SENSOR_MT9V111:
+	case SENSOR_MT9V011:
+		i2c_r2(gspca_dev, 0x20, &value2);
+		value2 &= ~0xc0a0;
+		if (sd->hflip)
+			value2 |= 0x8080;
+		if (sd->vflip)
+			value2 |= 0x4020;
+		i2c_w2(gspca_dev, 0x20, value2);
+		break;
+	case SENSOR_MT9M111:
+	case SENSOR_MT9V112:
+		i2c_r2(gspca_dev, 0x20, &value2);
+		value2 &= ~0x0003;
+		if (sd->hflip)
+			value2 |= 0x0002;
+		if (sd->vflip)
+			value2 |= 0x0001;
+		i2c_w2(gspca_dev, 0x20, value2);
+		break;
+	case SENSOR_HV7131R:
+		i2c_r1(gspca_dev, 0x01, &value);
+		value &= ~0x03;
+		if (sd->vflip)
+			value |= 0x01;
+		if (sd->hflip)
+			value |= 0x02;
+		i2c_w1(gspca_dev, 0x01, value);
+		break;
+	}
+	return 0;
+}
+
+static int set_exposure(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	u8 exp[8] = {0x81, sd->i2c_addr, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1e};
+	switch (sd->sensor) {
+	case SENSOR_OV7660:
+	case SENSOR_OV7670:
+	case SENSOR_SOI968:
+	case SENSOR_OV9655:
+	case SENSOR_OV9650:
+		exp[0] |= (3 << 4);
+		exp[2] = 0x2d;
+		exp[3] = sd->exposure & 0xff;
+		exp[4] = sd->exposure >> 8;
+		break;
+	case SENSOR_MT9M001:
+	case SENSOR_MT9M111:
+	case SENSOR_MT9V112:
+	case SENSOR_MT9V111:
+	case SENSOR_MT9V011:
+		exp[0] |= (3 << 4);
+		exp[2] = 0x09;
+		exp[3] = sd->exposure >> 8;
+		exp[4] = sd->exposure & 0xff;
+		break;
+	case SENSOR_HV7131R:
+		exp[0] |= (4 << 4);
+		exp[2] = 0x25;
+		exp[3] = ((sd->exposure * 0xffffff) / 0xffff) >> 16;
+		exp[4] = ((sd->exposure * 0xffffff) / 0xffff) >> 8;
+		exp[5] = ((sd->exposure * 0xffffff) / 0xffff) & 0xff;
+		break;
+	}
+	i2c_w(gspca_dev, exp);
+	return 0;
+}
+
+static int set_gain(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	u8 gain[8] = {0x81, sd->i2c_addr, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1d};
+	switch (sd->sensor) {
+	case SENSOR_OV7660:
+	case SENSOR_OV7670:
+	case SENSOR_SOI968:
+	case SENSOR_OV9655:
+	case SENSOR_OV9650:
+		gain[0] |= (2 << 4);
+		gain[3] = ov_gain[sd->gain];
+		break;
+	case SENSOR_MT9V011:
+	case SENSOR_MT9V111:
+		gain[0] |= (3 << 4);
+		gain[2] = 0x35;
+		gain[3] = micron1_gain[sd->gain] >> 8;
+		gain[4] = micron1_gain[sd->gain] & 0xff;
+		break;
+	case SENSOR_MT9V112:
+	case SENSOR_MT9M111:
+		gain[0] |= (3 << 4);
+		gain[2] = 0x2f;
+		gain[3] = micron1_gain[sd->gain] >> 8;
+		gain[4] = micron1_gain[sd->gain] & 0xff;
+		break;
+	case SENSOR_MT9M001:
+		gain[0] |= (3 << 4);
+		gain[2] = 0x2f;
+		gain[3] = micron2_gain[sd->gain] >> 8;
+		gain[4] = micron2_gain[sd->gain] & 0xff;
+		break;
+	case SENSOR_HV7131R:
+		gain[0] |= (2 << 4);
+		gain[2] = 0x30;
+		gain[3] = hv7131r_gain[sd->gain];
+		break;
+	}
+	i2c_w(gspca_dev, gain);
+	return 0;
+}
+
+static int sd_setbrightness(struct gspca_dev *gspca_dev, s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->brightness = val;
+	if (gspca_dev->streaming)
+		return set_cmatrix(gspca_dev);
+	return 0;
+}
+
+static int sd_getbrightness(struct gspca_dev *gspca_dev, s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	*val = sd->brightness;
+	return 0;
+}
+
+
+static int sd_setcontrast(struct gspca_dev *gspca_dev, s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->contrast = val;
+	if (gspca_dev->streaming)
+		return set_cmatrix(gspca_dev);
+	return 0;
+}
+
+static int sd_getcontrast(struct gspca_dev *gspca_dev, s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	*val = sd->contrast;
+	return 0;
+}
+
+static int sd_setsaturation(struct gspca_dev *gspca_dev, s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->saturation = val;
+	if (gspca_dev->streaming)
+		return set_cmatrix(gspca_dev);
+	return 0;
+}
+
+static int sd_getsaturation(struct gspca_dev *gspca_dev, s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	*val = sd->saturation;
+	return 0;
+}
+
+static int sd_sethue(struct gspca_dev *gspca_dev, s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->hue = val;
+	if (gspca_dev->streaming)
+		return set_cmatrix(gspca_dev);
+	return 0;
+}
+
+static int sd_gethue(struct gspca_dev *gspca_dev, s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	*val = sd->hue;
+	return 0;
+}
+
+static int sd_setgamma(struct gspca_dev *gspca_dev, s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->gamma = val;
+	if (gspca_dev->streaming)
+		return set_gamma(gspca_dev);
+	return 0;
+}
+
+static int sd_getgamma(struct gspca_dev *gspca_dev, s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	*val = sd->gamma;
+	return 0;
+}
+
+static int sd_setredbalance(struct gspca_dev *gspca_dev, s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->red = val;
+	if (gspca_dev->streaming)
+		return set_redblue(gspca_dev);
+	return 0;
+}
+
+static int sd_getredbalance(struct gspca_dev *gspca_dev, s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	*val = sd->red;
+	return 0;
+}
+
+static int sd_setbluebalance(struct gspca_dev *gspca_dev, s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->blue = val;
+	if (gspca_dev->streaming)
+		return set_redblue(gspca_dev);
+	return 0;
+}
+
+static int sd_getbluebalance(struct gspca_dev *gspca_dev, s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	*val = sd->blue;
+	return 0;
+}
+
+static int sd_sethflip(struct gspca_dev *gspca_dev, s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->hflip = val;
+	if (gspca_dev->streaming)
+		return set_hvflip(gspca_dev);
+	return 0;
+}
+
+static int sd_gethflip(struct gspca_dev *gspca_dev, s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	*val = sd->hflip;
+	return 0;
+}
+
+static int sd_setvflip(struct gspca_dev *gspca_dev, s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->vflip = val;
+	if (gspca_dev->streaming)
+		return set_hvflip(gspca_dev);
+	return 0;
+}
+
+static int sd_getvflip(struct gspca_dev *gspca_dev, s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	*val = sd->vflip;
+	return 0;
+}
+
+static int sd_setexposure(struct gspca_dev *gspca_dev, s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->exposure = val;
+	if (gspca_dev->streaming)
+		return set_exposure(gspca_dev);
+	return 0;
+}
+
+static int sd_getexposure(struct gspca_dev *gspca_dev, s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	*val = sd->exposure;
+	return 0;
+}
+
+static int sd_setgain(struct gspca_dev *gspca_dev, s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	sd->gain = val;
+	if (gspca_dev->streaming)
+		return set_gain(gspca_dev);
+	return 0;
+}
+
+static int sd_getgain(struct gspca_dev *gspca_dev, s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	*val = sd->gain;
+	return 0;
+}
+
+static int sd_setautoexposure(struct gspca_dev *gspca_dev, s32 val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	sd->auto_exposure = val;
+	return 0;
+}
+
+static int sd_getautoexposure(struct gspca_dev *gspca_dev, s32 *val)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	*val = sd->auto_exposure;
+	return 0;
+}
+
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+static int sd_dbg_g_register(struct gspca_dev *gspca_dev,
+			struct v4l2_dbg_register *reg)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	switch (reg->match.type) {
+	case V4L2_CHIP_MATCH_HOST:
+		if (reg->match.addr != 0)
+			return -EINVAL;
+		if (reg->reg < 0x1000 || reg->reg > 0x11ff)
+			return -EINVAL;
+		if (reg_r(gspca_dev, reg->reg, 1) < 0)
+			return -EINVAL;
+		reg->val = gspca_dev->usb_buf[0];
+		return 0;
+	case V4L2_CHIP_MATCH_I2C_ADDR:
+		if (reg->match.addr != sd->i2c_addr)
+			return -EINVAL;
+		if (sd->sensor >= SENSOR_MT9V011 &&
+		    sd->sensor <= SENSOR_MT9M111) {
+			if (i2c_r2(gspca_dev, reg->reg, (u16 *)&reg->val) < 0)
+				return -EINVAL;
+		} else {
+			if (i2c_r1(gspca_dev, reg->reg, (u8 *)&reg->val) < 0)
+				return -EINVAL;
+		}
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int sd_dbg_s_register(struct gspca_dev *gspca_dev,
+			struct v4l2_dbg_register *reg)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	switch (reg->match.type) {
+	case V4L2_CHIP_MATCH_HOST:
+		if (reg->match.addr != 0)
+			return -EINVAL;
+		if (reg->reg < 0x1000 || reg->reg > 0x11ff)
+			return -EINVAL;
+		if (reg_w1(gspca_dev, reg->reg, reg->val) < 0)
+			return -EINVAL;
+		return 0;
+	case V4L2_CHIP_MATCH_I2C_ADDR:
+		if (reg->match.addr != sd->i2c_addr)
+			return -EINVAL;
+		if (sd->sensor >= SENSOR_MT9V011 &&
+		    sd->sensor <= SENSOR_MT9M111) {
+			if (i2c_w2(gspca_dev, reg->reg, reg->val) < 0)
+				return -EINVAL;
+		} else {
+			if (i2c_w1(gspca_dev, reg->reg, reg->val) < 0)
+				return -EINVAL;
+		}
+		return 0;
+	}
+	return -EINVAL;
+}
+#endif
+
+static int sd_chip_ident(struct gspca_dev *gspca_dev,
+			struct v4l2_dbg_chip_ident *chip)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+
+	switch (chip->match.type) {
+	case V4L2_CHIP_MATCH_HOST:
+		if (chip->match.addr != 0)
+			return -EINVAL;
+		chip->revision = 0;
+		chip->ident = V4L2_IDENT_SN9C20X;
+		return 0;
+	case V4L2_CHIP_MATCH_I2C_ADDR:
+		if (chip->match.addr != sd->i2c_addr)
+			return -EINVAL;
+		chip->revision = 0;
+		chip->ident = i2c_ident[sd->sensor];
+		return 0;
+	}
+	return -EINVAL;
+}
+
+static int sd_config(struct gspca_dev *gspca_dev,
+			const struct usb_device_id *id)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	struct cam *cam;
+
+	cam = &gspca_dev->cam;
+
+	sd->sensor = (id->driver_info >> 8) & 0xff;
+	sd->i2c_addr = id->driver_info & 0xff;
+
+	switch (sd->sensor) {
+	case SENSOR_OV9650:
+		cam->cam_mode = sxga_mode;
+		cam->nmodes = ARRAY_SIZE(sxga_mode);
+		break;
+	default:
+		cam->cam_mode = vga_mode;
+		cam->nmodes = ARRAY_SIZE(vga_mode);
+	}
+
+	sd->old_step = 0;
+	sd->older_step = 0;
+	sd->exposure_step = 16;
+
+	sd->brightness = BRIGHTNESS_DEFAULT;
+	sd->contrast = CONTRAST_DEFAULT;
+	sd->saturation = SATURATION_DEFAULT;
+	sd->hue = HUE_DEFAULT;
+	sd->gamma = GAMMA_DEFAULT;
+	sd->red = RED_DEFAULT;
+	sd->blue = BLUE_DEFAULT;
+
+	sd->hflip = HFLIP_DEFAULT;
+	sd->vflip = VFLIP_DEFAULT;
+	sd->exposure = EXPOSURE_DEFAULT;
+	sd->gain = GAIN_DEFAULT;
+	sd->auto_exposure = AUTO_EXPOSURE_DEFAULT;
+
+	sd->quality = 95;
+
+#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV
+	sd->input_gpio = (id->driver_info >> 16) & 0xff;
+	if (sn9c20x_input_init(gspca_dev) < 0)
+		return -ENODEV;
+#endif
+	return 0;
+}
+
+static int sd_init(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int i;
+	u8 value;
+	u8 i2c_init[9] =
+		{0x80, sd->i2c_addr, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x03};
+
+	for (i = 0; i < ARRAY_SIZE(bridge_init); i++) {
+		value = bridge_init[i][1];
+		if (reg_w(gspca_dev, bridge_init[i][0], &value, 1) < 0) {
+			err("Device initialization failed");
+			return -ENODEV;
+		}
+	}
+
+	if (reg_w(gspca_dev, 0x10c0, i2c_init, 9) < 0) {
+		err("Device initialization failed");
+		return -ENODEV;
+	}
+
+	switch (sd->sensor) {
+	case SENSOR_OV9650:
+		if (ov9650_init_sensor(gspca_dev) < 0)
+			return -ENODEV;
+		info("OV9650 sensor detected");
+		break;
+	case SENSOR_OV9655:
+		if (ov9655_init_sensor(gspca_dev) < 0)
+			return -ENODEV;
+		info("OV9655 sensor detected");
+		break;
+	case SENSOR_SOI968:
+		if (soi968_init_sensor(gspca_dev) < 0)
+			return -ENODEV;
+		info("SOI968 sensor detected");
+		break;
+	case SENSOR_OV7660:
+		if (ov7660_init_sensor(gspca_dev) < 0)
+			return -ENODEV;
+		info("OV7660 sensor detected");
+		break;
+	case SENSOR_OV7670:
+		if (ov7670_init_sensor(gspca_dev) < 0)
+			return -ENODEV;
+		info("OV7670 sensor detected");
+		break;
+	case SENSOR_MT9VPRB:
+		if (mt9v_init_sensor(gspca_dev) < 0)
+			return -ENODEV;
+		break;
+	case SENSOR_MT9M111:
+		if (mt9m111_init_sensor(gspca_dev) < 0)
+			return -ENODEV;
+		info("MT9M111 sensor detected");
+		break;
+	case SENSOR_MT9M001:
+		if (mt9m001_init_sensor(gspca_dev) < 0)
+			return -ENODEV;
+		info("MT9M001 sensor detected");
+		break;
+	case SENSOR_HV7131R:
+		if (hv7131r_init_sensor(gspca_dev) < 0)
+			return -ENODEV;
+		info("HV7131R sensor detected");
+		break;
+	default:
+		info("Unsupported Sensor");
+		return -ENODEV;
+	}
+
+	return 0;
+}
+
+static void configure_sensor_output(struct gspca_dev *gspca_dev, int mode)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	u8 value;
+	switch (sd->sensor) {
+	case SENSOR_OV9650:
+		if (mode & MODE_SXGA) {
+			i2c_w1(gspca_dev, 0x17, 0x1b);
+			i2c_w1(gspca_dev, 0x18, 0xbc);
+			i2c_w1(gspca_dev, 0x19, 0x01);
+			i2c_w1(gspca_dev, 0x1a, 0x82);
+			i2c_r1(gspca_dev, 0x12, &value);
+			i2c_w1(gspca_dev, 0x12, value & 0x07);
+		} else {
+			i2c_w1(gspca_dev, 0x17, 0x24);
+			i2c_w1(gspca_dev, 0x18, 0xc5);
+			i2c_w1(gspca_dev, 0x19, 0x00);
+			i2c_w1(gspca_dev, 0x1a, 0x3c);
+			i2c_r1(gspca_dev, 0x12, &value);
+			i2c_w1(gspca_dev, 0x12, (value & 0x7) | 0x40);
+		}
+		break;
+	}
+}
+
+#define HW_WIN(mode, hstart, vstart) \
+((const u8 []){hstart & 0xff, hstart >> 8, \
+vstart & 0xff, vstart >> 8, \
+(mode & MODE_SXGA ? 1280 >> 4 : 640 >> 4), \
+(mode & MODE_SXGA ? 1024 >> 3 : 480 >> 3)})
+
+#define CLR_WIN(width, height) \
+((const u8 [])\
+{0, width >> 2, 0, height >> 1,\
+((width >> 10) & 0x01) | ((height >> 8) & 0x6)})
+
+static int sd_start(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int mode = gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv;
+	int width = gspca_dev->width;
+	int height = gspca_dev->height;
+	u8 fmt, scale = 0;
+
+	sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+	if (sd->jpeg_hdr == NULL)
+		return -ENOMEM;
+
+	jpeg_define(sd->jpeg_hdr, height, width,
+			0x21);
+	jpeg_set_qual(sd->jpeg_hdr, sd->quality);
+
+	if (mode & MODE_RAW)
+		fmt = 0x2d;
+	else if (mode & MODE_JPEG)
+		fmt = 0x2c;
+	else
+		fmt = 0x2f;
+
+	switch (mode & 0x0f) {
+	case 3:
+		scale = 0xc0;
+		info("Set 1280x1024");
+		break;
+	case 2:
+		scale = 0x80;
+		info("Set 640x480");
+		break;
+	case 1:
+		scale = 0x90;
+		info("Set 320x240");
+		break;
+	case 0:
+		scale = 0xa0;
+		info("Set 160x120");
+		break;
+	}
+
+	configure_sensor_output(gspca_dev, mode);
+	reg_w(gspca_dev, 0x1100, sd->jpeg_hdr + JPEG_QT0_OFFSET, 64);
+	reg_w(gspca_dev, 0x1140, sd->jpeg_hdr + JPEG_QT1_OFFSET, 64);
+	reg_w(gspca_dev, 0x10fb, CLR_WIN(width, height), 5);
+	reg_w(gspca_dev, 0x1180, HW_WIN(mode, sd->hstart, sd->vstart), 6);
+	reg_w1(gspca_dev, 0x1189, scale);
+	reg_w1(gspca_dev, 0x10e0, fmt);
+
+	set_cmatrix(gspca_dev);
+	set_gamma(gspca_dev);
+	set_redblue(gspca_dev);
+	set_gain(gspca_dev);
+	set_exposure(gspca_dev);
+	set_hvflip(gspca_dev);
+
+	reg_r(gspca_dev, 0x1061, 1);
+	reg_w1(gspca_dev, 0x1061, gspca_dev->usb_buf[0] | 0x02);
+	return 0;
+}
+
+static void sd_stopN(struct gspca_dev *gspca_dev)
+{
+	reg_r(gspca_dev, 0x1061, 1);
+	reg_w1(gspca_dev, 0x1061, gspca_dev->usb_buf[0] & ~0x02);
+}
+
+static void sd_stop0(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	kfree(sd->jpeg_hdr);
+}
+
+static void do_autoexposure(struct gspca_dev *gspca_dev)
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int avg_lum, new_exp;
+
+	if (!sd->auto_exposure)
+		return;
+
+	avg_lum = atomic_read(&sd->avg_lum);
+
+	/*
+	 * some hardcoded values are present
+	 * like those for maximal/minimal exposure
+	 * and exposure steps
+	 */
+	if (avg_lum < MIN_AVG_LUM) {
+		if (sd->exposure > 0x1770)
+			return;
+
+		new_exp = sd->exposure + sd->exposure_step;
+		if (new_exp > 0x1770)
+			new_exp = 0x1770;
+		if (new_exp < 0x10)
+			new_exp = 0x10;
+		sd->exposure = new_exp;
+		set_exposure(gspca_dev);
+
+		sd->older_step = sd->old_step;
+		sd->old_step = 1;
+
+		if (sd->old_step ^ sd->older_step)
+			sd->exposure_step /= 2;
+		else
+			sd->exposure_step += 2;
+	}
+	if (avg_lum > MAX_AVG_LUM) {
+		if (sd->exposure < 0x10)
+			return;
+		new_exp = sd->exposure - sd->exposure_step;
+		if (new_exp > 0x1700)
+			new_exp = 0x1770;
+		if (new_exp < 0x10)
+			new_exp = 0x10;
+		sd->exposure = new_exp;
+		set_exposure(gspca_dev);
+		sd->older_step = sd->old_step;
+		sd->old_step = 0;
+
+		if (sd->old_step ^ sd->older_step)
+			sd->exposure_step /= 2;
+		else
+			sd->exposure_step += 2;
+	}
+}
+
+static void sd_pkt_scan(struct gspca_dev *gspca_dev,
+			struct gspca_frame *frame,	/* target */
+			u8 *data,			/* isoc packet */
+			int len)			/* iso packet length */
+{
+	struct sd *sd = (struct sd *) gspca_dev;
+	int avg_lum;
+	static unsigned char frame_header[] =
+		{0xff, 0xff, 0x00, 0xc4, 0xc4, 0x96};
+	if (len == 64 && memcmp(data, frame_header, 6) == 0) {
+		avg_lum = ((data[35] >> 2) & 3) |
+			   (data[20] << 2) |
+			   (data[19] << 10);
+		avg_lum += ((data[35] >> 4) & 3) |
+			    (data[22] << 2) |
+			    (data[21] << 10);
+		avg_lum += ((data[35] >> 6) & 3) |
+			    (data[24] << 2) |
+			    (data[23] << 10);
+		avg_lum += (data[36] & 3) |
+			   (data[26] << 2) |
+			   (data[25] << 10);
+		avg_lum += ((data[36] >> 2) & 3) |
+			    (data[28] << 2) |
+			    (data[27] << 10);
+		avg_lum += ((data[36] >> 4) & 3) |
+			    (data[30] << 2) |
+			    (data[29] << 10);
+		avg_lum += ((data[36] >> 6) & 3) |
+			    (data[32] << 2) |
+			    (data[31] << 10);
+		avg_lum += ((data[44] >> 4) & 3) |
+			    (data[34] << 2) |
+			    (data[33] << 10);
+		avg_lum >>= 9;
+		atomic_set(&sd->avg_lum, avg_lum);
+		gspca_frame_add(gspca_dev, LAST_PACKET,
+				frame, data, len);
+		return;
+	}
+	if (gspca_dev->last_packet_type == LAST_PACKET) {
+		if (gspca_dev->cam.cam_mode[(int) gspca_dev->curr_mode].priv
+				& MODE_JPEG) {
+			gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+				sd->jpeg_hdr, JPEG_HDR_SZ);
+			gspca_frame_add(gspca_dev, INTER_PACKET, frame,
+				data, len);
+		} else {
+			gspca_frame_add(gspca_dev, FIRST_PACKET, frame,
+				data, len);
+		}
+	} else {
+		gspca_frame_add(gspca_dev, INTER_PACKET, frame, data, len);
+	}
+}
+
+/* sub-driver description */
+static const struct sd_desc sd_desc = {
+	.name = MODULE_NAME,
+	.ctrls = sd_ctrls,
+	.nctrls = ARRAY_SIZE(sd_ctrls),
+	.config = sd_config,
+	.init = sd_init,
+	.start = sd_start,
+	.stopN = sd_stopN,
+	.stop0 = sd_stop0,
+	.pkt_scan = sd_pkt_scan,
+	.dq_callback = do_autoexposure,
+#ifdef CONFIG_VIDEO_ADV_DEBUG
+	.set_register = sd_dbg_s_register,
+	.get_register = sd_dbg_g_register,
+#endif
+	.get_chip_ident = sd_chip_ident,
+};
+
+#define SN9C20X(sensor, i2c_addr, button_mask) \
+	.driver_info =  (button_mask << 16) \
+			| (SENSOR_ ## sensor << 8) \
+			| (i2c_addr)
+
+static const __devinitdata struct usb_device_id device_table[] = {
+	{USB_DEVICE(0x0c45, 0x6240), SN9C20X(MT9M001, 0x5d, 0)},
+	{USB_DEVICE(0x0c45, 0x6242), SN9C20X(MT9M111, 0x5d, 0)},
+	{USB_DEVICE(0x0c45, 0x6248), SN9C20X(OV9655, 0x30, 0)},
+	{USB_DEVICE(0x0c45, 0x624e), SN9C20X(SOI968, 0x30, 0x10)},
+	{USB_DEVICE(0x0c45, 0x624f), SN9C20X(OV9650, 0x30, 0)},
+	{USB_DEVICE(0x0c45, 0x6251), SN9C20X(OV9650, 0x30, 0)},
+	{USB_DEVICE(0x0c45, 0x6253), SN9C20X(OV9650, 0x30, 0)},
+	{USB_DEVICE(0x0c45, 0x6260), SN9C20X(OV7670, 0x21, 0)},
+	{USB_DEVICE(0x0c45, 0x6270), SN9C20X(MT9VPRB, 0x00, 0)},
+	{USB_DEVICE(0x0c45, 0x627b), SN9C20X(OV7660, 0x21, 0)},
+	{USB_DEVICE(0x0c45, 0x627c), SN9C20X(HV7131R, 0x11, 0)},
+	{USB_DEVICE(0x0c45, 0x627f), SN9C20X(OV9650, 0x30, 0)},
+	{USB_DEVICE(0x0c45, 0x6280), SN9C20X(MT9M001, 0x5d, 0)},
+	{USB_DEVICE(0x0c45, 0x6282), SN9C20X(MT9M111, 0x5d, 0)},
+	{USB_DEVICE(0x0c45, 0x6288), SN9C20X(OV9655, 0x30, 0)},
+	{USB_DEVICE(0x0c45, 0x628e), SN9C20X(SOI968, 0x30, 0)},
+	{USB_DEVICE(0x0c45, 0x628f), SN9C20X(OV9650, 0x30, 0)},
+	{USB_DEVICE(0x0c45, 0x62a0), SN9C20X(OV7670, 0x21, 0)},
+	{USB_DEVICE(0x0c45, 0x62b0), SN9C20X(MT9VPRB, 0x00, 0)},
+	{USB_DEVICE(0x0c45, 0x62b3), SN9C20X(OV9655, 0x30, 0)},
+	{USB_DEVICE(0x0c45, 0x62bb), SN9C20X(OV7660, 0x21, 0)},
+	{USB_DEVICE(0x0c45, 0x62bc), SN9C20X(HV7131R, 0x11, 0)},
+	{USB_DEVICE(0x045e, 0x00f4), SN9C20X(OV9650, 0x30, 0)},
+	{USB_DEVICE(0x145f, 0x013d), SN9C20X(OV7660, 0x21, 0)},
+	{USB_DEVICE(0x0458, 0x7029), SN9C20X(HV7131R, 0x11, 0)},
+	{USB_DEVICE(0xa168, 0x0610), SN9C20X(HV7131R, 0x11, 0)},
+	{USB_DEVICE(0xa168, 0x0611), SN9C20X(HV7131R, 0x11, 0)},
+	{USB_DEVICE(0xa168, 0x0613), SN9C20X(HV7131R, 0x11, 0)},
+	{USB_DEVICE(0xa168, 0x0618), SN9C20X(HV7131R, 0x11, 0)},
+	{USB_DEVICE(0xa168, 0x0614), SN9C20X(MT9M111, 0x5d, 0)},
+	{USB_DEVICE(0xa168, 0x0615), SN9C20X(MT9M111, 0x5d, 0)},
+	{USB_DEVICE(0xa168, 0x0617), SN9C20X(MT9M111, 0x5d, 0)},
+	{}
+};
+MODULE_DEVICE_TABLE(usb, device_table);
+
+/* -- device connect -- */
+static int sd_probe(struct usb_interface *intf,
+		    const struct usb_device_id *id)
+{
+	return gspca_dev_probe(intf, id, &sd_desc, sizeof(struct sd),
+				THIS_MODULE);
+}
+
+static void sd_disconnect(struct usb_interface *intf)
+{
+#ifdef CONFIG_USB_GSPCA_SN9C20X_EVDEV
+	struct gspca_dev *gspca_dev = usb_get_intfdata(intf);
+
+	sn9c20x_input_cleanup(gspca_dev);
+#endif
+
+	gspca_disconnect(intf);
+}
+
+static struct usb_driver sd_driver = {
+	.name = MODULE_NAME,
+	.id_table = device_table,
+	.probe = sd_probe,
+	.disconnect = sd_disconnect,
+#ifdef CONFIG_PM
+	.suspend = gspca_suspend,
+	.resume = gspca_resume,
+	.reset_resume = gspca_resume,
+#endif
+};
+
+/* -- module insert / remove -- */
+static int __init sd_mod_init(void)
+{
+	int ret;
+	ret = usb_register(&sd_driver);
+	if (ret < 0)
+		return ret;
+	info("registered");
+	return 0;
+}
+static void __exit sd_mod_exit(void)
+{
+	usb_deregister(&sd_driver);
+	info("deregistered");
+}
+
+module_init(sd_mod_init);
+module_exit(sd_mod_exit);
diff --git a/drivers/media/video/gspca/sonixj.c b/drivers/media/video/gspca/sonixj.c
index 0d02f41..d6332ab 100644
--- a/drivers/media/video/gspca/sonixj.c
+++ b/drivers/media/video/gspca/sonixj.c
@@ -1634,6 +1634,8 @@ static void setfreq(struct gspca_dev *gspca_dev)
 {
 	struct sd *sd = (struct sd *) gspca_dev;
 
+	if (gspca_dev->ctrl_dis & (1 << FREQ_IDX))
+		return;
 	if (sd->sensor == SENSOR_OV7660) {
 		switch (sd->freq) {
 		case 0: /* Banding filter disabled */
@@ -1735,6 +1737,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
 	/* create the JPEG header */
 	sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+	if (!sd->jpeg_hdr)
+		return -ENOMEM;
 	jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
 			0x21);		/* JPEG 422 */
 	jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/gspca/spca500.c b/drivers/media/video/gspca/spca500.c
index 8806b2f..fab7ef8 100644
--- a/drivers/media/video/gspca/spca500.c
+++ b/drivers/media/video/gspca/spca500.c
@@ -670,6 +670,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
 	/* create the JPEG header */
 	sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+	if (!sd->jpeg_hdr)
+		return -ENOMEM;
 	jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
 			0x22);		/* JPEG 411 */
 	jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/gspca/stk014.c b/drivers/media/video/gspca/stk014.c
index f25be20..4762896 100644
--- a/drivers/media/video/gspca/stk014.c
+++ b/drivers/media/video/gspca/stk014.c
@@ -333,6 +333,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
 	/* create the JPEG header */
 	sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+	if (!sd->jpeg_hdr)
+		return -ENOMEM;
 	jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
 			0x22);		/* JPEG 411 */
 	jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
index 3039ec2..e5024c8 100644
--- a/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
+++ b/drivers/media/video/gspca/stv06xx/stv06xx_hdcs.c
@@ -64,7 +64,7 @@ static struct v4l2_pix_format hdcs1x00_mode[] = {
 	{
 		HDCS_1X00_DEF_WIDTH,
 		HDCS_1X00_DEF_HEIGHT,
-		V4L2_PIX_FMT_SBGGR8,
+		V4L2_PIX_FMT_SGRBG8,
 		V4L2_FIELD_NONE,
 		.sizeimage =
 			HDCS_1X00_DEF_WIDTH * HDCS_1X00_DEF_HEIGHT,
@@ -80,7 +80,7 @@ static struct v4l2_pix_format hdcs1020_mode[] = {
 	{
 		HDCS_1020_DEF_WIDTH,
 		HDCS_1020_DEF_HEIGHT,
-		V4L2_PIX_FMT_SBGGR8,
+		V4L2_PIX_FMT_SGRBG8,
 		V4L2_FIELD_NONE,
 		.sizeimage =
 			HDCS_1020_DEF_WIDTH * HDCS_1020_DEF_HEIGHT,
@@ -131,9 +131,11 @@ static int hdcs_reg_write_seq(struct sd *sd, u8 reg, u8 *vals, u8 len)
 		     (reg + len > 0xff)))
 		return -EINVAL;
 
-	for (i = 0; i < len; i++, reg++) {
-		regs[2*i] = reg;
-		regs[2*i+1] = vals[i];
+	for (i = 0; i < len; i++) {
+		regs[2 * i] = reg;
+		regs[2 * i + 1] = vals[i];
+		/* All addresses are shifted left one bit as bit 0 toggles r/w */
+		reg += 2;
 	}
 
 	return stv06xx_write_sensor_bytes(sd, regs, len);
@@ -174,7 +176,9 @@ static int hdcs_set_state(struct sd *sd, enum hdcs_power_state state)
 	}
 
 	ret = stv06xx_write_sensor(sd, HDCS_REG_CONTROL(sd), val);
-	if (ret < 0)
+
+	/* Update the state if the write succeeded */
+	if (!ret)
 		hdcs->state = state;
 
 	return ret;
diff --git a/drivers/media/video/gspca/sunplus.c b/drivers/media/video/gspca/sunplus.c
index 9623f29..5127bbf 100644
--- a/drivers/media/video/gspca/sunplus.c
+++ b/drivers/media/video/gspca/sunplus.c
@@ -973,6 +973,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
 	/* create the JPEG header */
 	sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+	if (!sd->jpeg_hdr)
+		return -ENOMEM;
 	jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
 			0x22);		/* JPEG 411 */
 	jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/gspca/zc3xx.c b/drivers/media/video/gspca/zc3xx.c
index 08422d3..3d2756f 100644
--- a/drivers/media/video/gspca/zc3xx.c
+++ b/drivers/media/video/gspca/zc3xx.c
@@ -7243,6 +7243,8 @@ static int sd_start(struct gspca_dev *gspca_dev)
 
 	/* create the JPEG header */
 	sd->jpeg_hdr = kmalloc(JPEG_HDR_SZ, GFP_KERNEL);
+	if (!sd->jpeg_hdr)
+		return -ENOMEM;
 	jpeg_define(sd->jpeg_hdr, gspca_dev->height, gspca_dev->width,
 			0x21);		/* JPEG 422 */
 	jpeg_set_qual(sd->jpeg_hdr, sd->quality);
diff --git a/drivers/media/video/mt9v011.c b/drivers/media/video/mt9v011.c
index 1fe8fc9..b2260de 100644
--- a/drivers/media/video/mt9v011.c
+++ b/drivers/media/video/mt9v011.c
@@ -8,6 +8,7 @@
 #include <linux/i2c.h>
 #include <linux/videodev2.h>
 #include <linux/delay.h>
+#include <asm/div64.h>
 #include <media/v4l2-device.h>
 #include "mt9v011.h"
 #include <media/v4l2-i2c-drv.h>
@@ -57,6 +58,7 @@ static struct v4l2_queryctrl mt9v011_qctrl[] = {
 struct mt9v011 {
 	struct v4l2_subdev sd;
 	unsigned width, height;
+	unsigned xtal;
 
 	u16 global_gain, red_bal, blue_bal;
 };
@@ -131,7 +133,7 @@ static const struct i2c_reg_value mt9v011_init_default[] = {
 		{ R1E_MT9V011_DIGITAL_ZOOM,  0x0000 },
 		{ R20_MT9V011_READ_MODE, 0x1000 },
 
-		{ R07_MT9V011_OUT_CTRL, 0x000a },	/* chip enable */
+		{ R07_MT9V011_OUT_CTRL, 0x0002 },	/* chip enable */
 };
 
 static void set_balance(struct v4l2_subdev *sd)
@@ -154,6 +156,31 @@ static void set_balance(struct v4l2_subdev *sd)
 	mt9v011_write(sd, R2D_MT9V011_RED_GAIN, red_gain);
 }
 
+static void calc_fps(struct v4l2_subdev *sd)
+{
+	struct mt9v011 *core = to_mt9v011(sd);
+	unsigned height, width, hblank, vblank, speed;
+	unsigned row_time, t_time;
+	u64 frames_per_ms;
+	unsigned tmp;
+
+	height = mt9v011_read(sd, R03_MT9V011_HEIGHT);
+	width = mt9v011_read(sd, R04_MT9V011_WIDTH);
+	hblank = mt9v011_read(sd, R05_MT9V011_HBLANK);
+	vblank = mt9v011_read(sd, R06_MT9V011_VBLANK);
+	speed = mt9v011_read(sd, R0A_MT9V011_CLK_SPEED);
+
+	row_time = (width + 113 + hblank) * (speed + 2);
+	t_time = row_time * (height + vblank + 1);
+
+	frames_per_ms = core->xtal * 1000l;
+	do_div(frames_per_ms, t_time);
+	tmp = frames_per_ms;
+
+	v4l2_dbg(1, debug, sd, "Programmed to %u.%03u fps (%d pixel clcks)\n",
+		tmp / 1000, tmp % 1000, t_time);
+}
+
 static void set_res(struct v4l2_subdev *sd)
 {
 	struct mt9v011 *core = to_mt9v011(sd);
@@ -175,10 +202,12 @@ static void set_res(struct v4l2_subdev *sd)
 	mt9v011_write(sd, R04_MT9V011_WIDTH, core->width);
 	mt9v011_write(sd, R05_MT9V011_HBLANK, 771 - core->width);
 
-	vstart = 8 + (640 - core->height) / 2;
+	vstart = 8 + (480 - core->height) / 2;
 	mt9v011_write(sd, R01_MT9V011_ROWSTART, vstart);
 	mt9v011_write(sd, R03_MT9V011_HEIGHT, core->height);
 	mt9v011_write(sd, R06_MT9V011_VBLANK, 508 - core->height);
+
+	calc_fps(sd);
 };
 
 static int mt9v011_reset(struct v4l2_subdev *sd, u32 val)
@@ -215,6 +244,23 @@ static int mt9v011_g_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 	return -EINVAL;
 }
 
+static int mt9v011_queryctrl(struct v4l2_subdev *sd, struct v4l2_queryctrl *qc)
+{
+	int i;
+
+	v4l2_dbg(1, debug, sd, "queryctrl called\n");
+
+	for (i = 0; i < ARRAY_SIZE(mt9v011_qctrl); i++)
+		if (qc->id && qc->id == mt9v011_qctrl[i].id) {
+			memcpy(qc, &(mt9v011_qctrl[i]),
+			       sizeof(*qc));
+			return 0;
+		}
+
+	return -EINVAL;
+}
+
+
 static int mt9v011_s_ctrl(struct v4l2_subdev *sd, struct v4l2_control *ctrl)
 {
 	struct mt9v011 *core = to_mt9v011(sd);
@@ -294,6 +340,22 @@ static int mt9v011_s_fmt(struct v4l2_subdev *sd, struct v4l2_format *fmt)
 	return 0;
 }
 
+static int mt9v011_s_config(struct v4l2_subdev *sd, int dumb, void *data)
+{
+	struct mt9v011 *core = to_mt9v011(sd);
+	unsigned *xtal = data;
+
+	v4l2_dbg(1, debug, sd, "s_config called\n");
+
+	if (xtal) {
+		core->xtal = *xtal;
+		v4l2_dbg(1, debug, sd, "xtal set to %d.%03d MHz\n",
+			 *xtal / 1000000, (*xtal / 1000) % 1000);
+	}
+
+	return 0;
+}
+
 
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 static int mt9v011_g_register(struct v4l2_subdev *sd,
@@ -338,9 +400,11 @@ static int mt9v011_g_chip_ident(struct v4l2_subdev *sd,
 }
 
 static const struct v4l2_subdev_core_ops mt9v011_core_ops = {
+	.queryctrl = mt9v011_queryctrl,
 	.g_ctrl = mt9v011_g_ctrl,
 	.s_ctrl = mt9v011_s_ctrl,
 	.reset = mt9v011_reset,
+	.s_config = mt9v011_s_config,
 	.g_chip_ident = mt9v011_g_chip_ident,
 #ifdef CONFIG_VIDEO_ADV_DEBUG
 	.g_register = mt9v011_g_register,
@@ -395,6 +459,7 @@ static int mt9v011_probe(struct i2c_client *c,
 	core->global_gain = 0x0024;
 	core->width  = 640;
 	core->height = 480;
+	core->xtal = 27000000;	/* Hz */
 
 	v4l_info(c, "chip found @ 0x%02x (%s)\n",
 		 c->addr << 1, c->adapter->name);
diff --git a/drivers/misc/cb710/sgbuf2.c b/drivers/misc/cb710/sgbuf2.c
index d38a7ac..d019746 100644
--- a/drivers/misc/cb710/sgbuf2.c
+++ b/drivers/misc/cb710/sgbuf2.c
@@ -114,7 +114,6 @@ static void sg_dwiter_write_slow(struct sg_mapping_iter *miter, uint32_t data)
 		if (!left)
 			return;
 		addr += len;
-		flush_kernel_dcache_page(miter->page);
 	} while (sg_dwiter_next(miter));
 }
 
@@ -142,9 +141,6 @@ void cb710_sg_dwiter_write_next_block(struct sg_mapping_iter *miter, uint32_t da
 			return;
 	} else
 		sg_dwiter_write_slow(miter, data);
-
-	if (miter->length == miter->consumed)
-		flush_kernel_dcache_page(miter->page);
 }
 EXPORT_SYMBOL_GPL(cb710_sg_dwiter_write_next_block);
 
diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c
index b34cb5f..2e535a0 100644
--- a/drivers/misc/eeprom/at25.c
+++ b/drivers/misc/eeprom/at25.c
@@ -173,6 +173,7 @@ at25_ee_write(struct at25_data *at25, const char *buf, loff_t off,
 		unsigned	segment;
 		unsigned	offset = (unsigned) off;
 		u8		*cp = bounce + 1;
+		int		sr;
 
 		*cp = AT25_WREN;
 		status = spi_write(at25->spi, cp, 1);
@@ -214,7 +215,6 @@ at25_ee_write(struct at25_data *at25, const char *buf, loff_t off,
 		timeout = jiffies + msecs_to_jiffies(EE_TIMEOUT);
 		retries = 0;
 		do {
-			int	sr;
 
 			sr = spi_w8r8(at25->spi, AT25_RDSR);
 			if (sr < 0 || (sr & AT25_SR_nRDY)) {
@@ -228,7 +228,7 @@ at25_ee_write(struct at25_data *at25, const char *buf, loff_t off,
 				break;
 		} while (retries++ < 3 || time_before_eq(jiffies, timeout));
 
-		if (time_after(jiffies, timeout)) {
+		if ((sr < 0) || (sr & AT25_SR_nRDY)) {
 			dev_err(&at25->spi->dev,
 				"write %d bytes offset %d, "
 				"timeout after %u msecs\n",
diff --git a/drivers/mmc/host/cb710-mmc.c b/drivers/mmc/host/cb710-mmc.c
index 11efefb..4e72964 100644
--- a/drivers/mmc/host/cb710-mmc.c
+++ b/drivers/mmc/host/cb710-mmc.c
@@ -278,7 +278,7 @@ static int cb710_mmc_receive(struct cb710_slot *slot, struct mmc_data *data)
 	if (unlikely(data->blksz & 15 && (data->blocks != 1 || data->blksz != 8)))
 		return -EINVAL;
 
-	sg_miter_start(&miter, data->sg, data->sg_len, 0);
+	sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_TO_SG);
 
 	cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
 		15, CB710_MMC_C2_READ_PIO_SIZE_MASK);
@@ -307,7 +307,7 @@ static int cb710_mmc_receive(struct cb710_slot *slot, struct mmc_data *data)
 			goto out;
 	}
 out:
-	cb710_sg_miter_stop_writing(&miter);
+	sg_miter_stop(&miter);
 	return err;
 }
 
@@ -322,7 +322,7 @@ static int cb710_mmc_send(struct cb710_slot *slot, struct mmc_data *data)
 	if (unlikely(data->blocks > 1 && data->blksz & 15))
 		return -EINVAL;
 
-	sg_miter_start(&miter, data->sg, data->sg_len, 0);
+	sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_FROM_SG);
 
 	cb710_modify_port_8(slot, CB710_MMC_CONFIG2_PORT,
 		0, CB710_MMC_C2_READ_PIO_SIZE_MASK);
diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c
index e0be21a..bf98d7c 100644
--- a/drivers/mmc/host/imxmmc.c
+++ b/drivers/mmc/host/imxmmc.c
@@ -652,7 +652,7 @@ static irqreturn_t imxmci_irq(int irq, void *devid)
 	set_bit(IMXMCI_PEND_STARTED_b, &host->pending_events);
 	tasklet_schedule(&host->tasklet);
 
-	return IRQ_RETVAL(handled);;
+	return IRQ_RETVAL(handled);
 }
 
 static void imxmci_tasklet_fnc(unsigned long data)
diff --git a/drivers/mmc/host/sdhci-of.c b/drivers/mmc/host/sdhci-of.c
index d79fa55..9088443 100644
--- a/drivers/mmc/host/sdhci-of.c
+++ b/drivers/mmc/host/sdhci-of.c
@@ -158,6 +158,13 @@ static unsigned int esdhc_get_max_clock(struct sdhci_host *host)
 	return of_host->clock;
 }
 
+static unsigned int esdhc_get_min_clock(struct sdhci_host *host)
+{
+	struct sdhci_of_host *of_host = sdhci_priv(host);
+
+	return of_host->clock / 256 / 16;
+}
+
 static unsigned int esdhc_get_timeout_clock(struct sdhci_host *host)
 {
 	struct sdhci_of_host *of_host = sdhci_priv(host);
@@ -184,6 +191,7 @@ static struct sdhci_of_data sdhci_esdhc = {
 		.set_clock = esdhc_set_clock,
 		.enable_dma = esdhc_enable_dma,
 		.get_max_clock = esdhc_get_max_clock,
+		.get_min_clock = esdhc_get_min_clock,
 		.get_timeout_clock = esdhc_get_timeout_clock,
 	},
 };
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 6779b4e..fc96f8c 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -773,8 +773,14 @@ static void sdhci_prepare_data(struct sdhci_host *host, struct mmc_data *data)
 	}
 
 	if (!(host->flags & SDHCI_REQ_USE_DMA)) {
-		sg_miter_start(&host->sg_miter,
-			data->sg, data->sg_len, SG_MITER_ATOMIC);
+		int flags;
+
+		flags = SG_MITER_ATOMIC;
+		if (host->data->flags & MMC_DATA_READ)
+			flags |= SG_MITER_TO_SG;
+		else
+			flags |= SG_MITER_FROM_SG;
+		sg_miter_start(&host->sg_miter, data->sg, data->sg_len, flags);
 		host->blocks = data->blocks;
 	}
 
@@ -1766,7 +1772,10 @@ int sdhci_add_host(struct sdhci_host *host)
 	 * Set host parameters.
 	 */
 	mmc->ops = &sdhci_ops;
-	mmc->f_min = host->max_clk / 256;
+	if (host->ops->get_min_clock)
+		mmc->f_min = host->ops->get_min_clock(host);
+	else
+		mmc->f_min = host->max_clk / 256;
 	mmc->f_max = host->max_clk;
 	mmc->caps = MMC_CAP_SDIO_IRQ;
 
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index 831ddf7..c77e9ff 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -302,6 +302,7 @@ struct sdhci_ops {
 
 	int		(*enable_dma)(struct sdhci_host *host);
 	unsigned int	(*get_max_clock)(struct sdhci_host *host);
+	unsigned int	(*get_min_clock)(struct sdhci_host *host);
 	unsigned int	(*get_timeout_clock)(struct sdhci_host *host);
 };
 
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index b5a7513..5f6509a 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -1732,6 +1732,7 @@ config KS8842
 config KS8851
        tristate "Micrel KS8851 SPI"
        depends on SPI
+       select MII
        help
          SPI driver for Micrel KS8851 SPI attached network chip.
 
diff --git a/drivers/net/arm/at91_ether.c b/drivers/net/arm/at91_ether.c
index 2e7419a..5041d10 100644
--- a/drivers/net/arm/at91_ether.c
+++ b/drivers/net/arm/at91_ether.c
@@ -1228,7 +1228,6 @@ static int at91ether_resume(struct platform_device *pdev)
 #endif
 
 static struct platform_driver at91ether_driver = {
-	.probe		= at91ether_probe,
 	.remove		= __devexit_p(at91ether_remove),
 	.suspend	= at91ether_suspend,
 	.resume		= at91ether_resume,
@@ -1240,7 +1239,7 @@ static struct platform_driver at91ether_driver = {
 
 static int __init at91ether_init(void)
 {
-	return platform_driver_register(&at91ether_driver);
+	return platform_driver_probe(&at91ether_driver, at91ether_probe);
 }
 
 static void __exit at91ether_exit(void)
diff --git a/drivers/net/at1700.c b/drivers/net/at1700.c
index 18b566a..cf30e27 100644
--- a/drivers/net/at1700.c
+++ b/drivers/net/at1700.c
@@ -318,7 +318,7 @@ static int __init at1700_probe1(struct net_device *dev, int ioaddr)
 				pos3 = mca_read_stored_pos( slot, 3 );
 				pos4 = mca_read_stored_pos( slot, 4 );
 
-				for (l_i = 0; l_i < 0x09; l_i++)
+				for (l_i = 0; l_i < 8; l_i++)
 					if (( pos3 & 0x07) == at1700_ioaddr_pattern[l_i])
 						break;
 				ioaddr = at1700_mca_probe_list[l_i];
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index c43f6a1..dea3155 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -667,7 +667,7 @@ static void skb_fill_rx_data(struct be_adapter *adapter,
 	struct be_queue_info *rxq = &adapter->rx_obj.q;
 	struct be_rx_page_info *page_info;
 	u16 rxq_idx, i, num_rcvd, j;
-	u32 pktsize, hdr_len, curr_frag_len;
+	u32 pktsize, hdr_len, curr_frag_len, size;
 	u8 *start;
 
 	rxq_idx = AMAP_GET_BITS(struct amap_eth_rx_compl, fragndx, rxcp);
@@ -708,12 +708,13 @@ static void skb_fill_rx_data(struct be_adapter *adapter,
 	}
 
 	/* More frags present for this completion */
-	pktsize -= curr_frag_len; /* account for above copied frag */
+	size = pktsize;
 	for (i = 1, j = 0; i < num_rcvd; i++) {
+		size -= curr_frag_len;
 		index_inc(&rxq_idx, rxq->len);
 		page_info = get_rx_page_info(adapter, rxq_idx);
 
-		curr_frag_len = min(pktsize, rx_frag_size);
+		curr_frag_len = min(size, rx_frag_size);
 
 		/* Coalesce all frags from the same physical page in one slot */
 		if (page_info->page_offset == 0) {
@@ -731,7 +732,6 @@ static void skb_fill_rx_data(struct be_adapter *adapter,
 		skb_shinfo(skb)->frags[j].size += curr_frag_len;
 		skb->len += curr_frag_len;
 		skb->data_len += curr_frag_len;
-		pktsize -= curr_frag_len;
 
 		memset(page_info, 0, sizeof(*page_info));
 	}
diff --git a/drivers/net/cnic.c b/drivers/net/cnic.c
index 4d1515f..4869d77 100644
--- a/drivers/net/cnic.c
+++ b/drivers/net/cnic.c
@@ -227,7 +227,7 @@ static int cnic_send_nlmsg(struct cnic_local *cp, u32 type,
 	}
 
 	rcu_read_lock();
-	ulp_ops = rcu_dereference(cp->ulp_ops[CNIC_ULP_ISCSI]);
+	ulp_ops = rcu_dereference(cnic_ulp_tbl[CNIC_ULP_ISCSI]);
 	if (ulp_ops)
 		ulp_ops->iscsi_nl_send_msg(cp->dev, msg_type, buf, len);
 	rcu_read_unlock();
@@ -319,6 +319,20 @@ static int cnic_abort_prep(struct cnic_sock *csk)
 	return 0;
 }
 
+static void cnic_uio_stop(void)
+{
+	struct cnic_dev *dev;
+
+	read_lock(&cnic_dev_lock);
+	list_for_each_entry(dev, &cnic_dev_list, list) {
+		struct cnic_local *cp = dev->cnic_priv;
+
+		if (cp->cnic_uinfo)
+			cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
+	}
+	read_unlock(&cnic_dev_lock);
+}
+
 int cnic_register_driver(int ulp_type, struct cnic_ulp_ops *ulp_ops)
 {
 	struct cnic_dev *dev;
@@ -390,6 +404,9 @@ int cnic_unregister_driver(int ulp_type)
 	}
 	read_unlock(&cnic_dev_lock);
 
+	if (ulp_type == CNIC_ULP_ISCSI)
+		cnic_uio_stop();
+
 	rcu_assign_pointer(cnic_ulp_tbl[ulp_type], NULL);
 
 	mutex_unlock(&cnic_lock);
@@ -632,7 +649,6 @@ static void cnic_free_resc(struct cnic_dev *dev)
 	int i = 0;
 
 	if (cp->cnic_uinfo) {
-		cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
 		while (cp->uio_dev != -1 && i < 15) {
 			msleep(100);
 			i++;
@@ -1057,6 +1073,9 @@ static void cnic_ulp_stop(struct cnic_dev *dev)
 	struct cnic_local *cp = dev->cnic_priv;
 	int if_type;
 
+	if (cp->cnic_uinfo)
+		cnic_send_nlmsg(cp, ISCSI_KEVENT_IF_DOWN, NULL);
+
 	rcu_read_lock();
 	for (if_type = 0; if_type < MAX_CNIC_ULP_TYPE; if_type++) {
 		struct cnic_ulp_ops *ulp_ops;
diff --git a/drivers/net/eepro.c b/drivers/net/eepro.c
index cc2ab64..4f70034 100644
--- a/drivers/net/eepro.c
+++ b/drivers/net/eepro.c
@@ -1784,7 +1784,7 @@ int __init init_module(void)
 		printk(KERN_INFO "eepro_init_module: Auto-detecting boards (May God protect us...)\n");
 	}
 
-	for (i = 0; io[i] != -1 && i < MAX_EEPRO; i++) {
+	for (i = 0; i < MAX_EEPRO && io[i] != -1; i++) {
 		dev = alloc_etherdev(sizeof(struct eepro_local));
 		if (!dev)
 			break;
diff --git a/drivers/net/fealnx.c b/drivers/net/fealnx.c
index 48385c4..160655d 100644
--- a/drivers/net/fealnx.c
+++ b/drivers/net/fealnx.c
@@ -584,7 +584,8 @@ static int __devinit fealnx_init_one(struct pci_dev *pdev,
 	if (np->flags == HAS_MII_XCVR) {
 		int phy, phy_idx = 0;
 
-		for (phy = 1; phy < 32 && phy_idx < 4; phy++) {
+		for (phy = 1; phy < 32 && phy_idx < ARRAY_SIZE(np->phys);
+			       phy++) {
 			int mii_status = mdio_read(dev, phy, 1);
 
 			if (mii_status != 0xffff && mii_status != 0x0000) {
diff --git a/drivers/net/fs_enet/fs_enet-main.c b/drivers/net/fs_enet/fs_enet-main.c
index b892c3a..2bc2d2b 100644
--- a/drivers/net/fs_enet/fs_enet-main.c
+++ b/drivers/net/fs_enet/fs_enet-main.c
@@ -754,17 +754,16 @@ static int fs_init_phy(struct net_device *dev)
 	fep->oldlink = 0;
 	fep->oldspeed = 0;
 	fep->oldduplex = -1;
-	if(fep->fpi->phy_node)
-		phydev = of_phy_connect(dev, fep->fpi->phy_node,
-					&fs_adjust_link, 0,
-					PHY_INTERFACE_MODE_MII);
-	else {
-		printk("No phy bus ID specified in BSP code\n");
-		return -EINVAL;
+
+	phydev = of_phy_connect(dev, fep->fpi->phy_node, &fs_adjust_link, 0,
+				PHY_INTERFACE_MODE_MII);
+	if (!phydev) {
+		phydev = of_phy_connect_fixed_link(dev, &fs_adjust_link,
+						   PHY_INTERFACE_MODE_MII);
 	}
-	if (IS_ERR(phydev)) {
-		printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
-		return PTR_ERR(phydev);
+	if (!phydev) {
+		dev_err(&dev->dev, "Could not attach to PHY\n");
+		return -ENODEV;
 	}
 
 	fep->phydev = phydev;
@@ -1005,6 +1004,7 @@ static int __devinit fs_enet_probe(struct of_device *ofdev,
 		goto out_free_fpi;
 	}
 
+	SET_NETDEV_DEV(ndev, &ofdev->dev);
 	dev_set_drvdata(&ofdev->dev, ndev);
 
 	fep = netdev_priv(ndev);
diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c
index 43d813e..f8ffcbf 100644
--- a/drivers/net/gianfar.c
+++ b/drivers/net/gianfar.c
@@ -264,15 +264,6 @@ static int gfar_of_init(struct net_device *dev)
 		priv->device_flags |= FSL_GIANFAR_DEV_HAS_MAGIC_PACKET;
 
 	priv->phy_node = of_parse_phandle(np, "phy-handle", 0);
-	if (!priv->phy_node) {
-		u32 *fixed_link;
-
-		fixed_link = (u32 *)of_get_property(np, "fixed-link", NULL);
-		if (!fixed_link) {
-			err = -ENODEV;
-			goto err_out;
-		}
-	}
 
 	/* Find the TBI PHY.  If it's not there, we don't support SGMII */
 	priv->tbi_node = of_parse_phandle(np, "tbi-handle", 0);
@@ -659,13 +650,14 @@ static int init_phy(struct net_device *dev)
 
 	interface = gfar_get_interface(dev);
 
-	if (priv->phy_node) {
-		priv->phydev = of_phy_connect(dev, priv->phy_node, &adjust_link,
-					      0, interface);
-		if (!priv->phydev) {
-			dev_err(&dev->dev, "error: Could not attach to PHY\n");
-			return -ENODEV;
-		}
+	priv->phydev = of_phy_connect(dev, priv->phy_node, &adjust_link, 0,
+				      interface);
+	if (!priv->phydev)
+		priv->phydev = of_phy_connect_fixed_link(dev, &adjust_link,
+							 interface);
+	if (!priv->phydev) {
+		dev_err(&dev->dev, "could not attach to PHY\n");
+		return -ENODEV;
 	}
 
 	if (interface == PHY_INTERFACE_MODE_SGMII)
diff --git a/drivers/net/ixgbe/ixgbe.h b/drivers/net/ixgbe/ixgbe.h
index cd22323..1b12c7b 100644
--- a/drivers/net/ixgbe/ixgbe.h
+++ b/drivers/net/ixgbe/ixgbe.h
@@ -327,6 +327,7 @@ struct ixgbe_adapter {
 #define IXGBE_FLAG_IN_SFP_MOD_TASK              (u32)(1 << 25)
 #define IXGBE_FLAG_FDIR_HASH_CAPABLE            (u32)(1 << 26)
 #define IXGBE_FLAG_FDIR_PERFECT_CAPABLE         (u32)(1 << 27)
+#define IXGBE_FLAG_FCOE_CAPABLE                 (u32)(1 << 28)
 #define IXGBE_FLAG_FCOE_ENABLED                 (u32)(1 << 29)
 
 	u32 flags2;
diff --git a/drivers/net/ixgbe/ixgbe_dcb_nl.c b/drivers/net/ixgbe/ixgbe_dcb_nl.c
index da2c851..1c72657 100644
--- a/drivers/net/ixgbe/ixgbe_dcb_nl.c
+++ b/drivers/net/ixgbe/ixgbe_dcb_nl.c
@@ -139,6 +139,18 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
 			adapter->flags &= ~IXGBE_FLAG_FDIR_PERFECT_CAPABLE;
 		}
 		adapter->flags |= IXGBE_FLAG_DCB_ENABLED;
+#ifdef IXGBE_FCOE
+		/* Turn on FCoE offload */
+		if ((adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) &&
+		    (!(adapter->flags & IXGBE_FLAG_FCOE_ENABLED))) {
+			adapter->flags |= IXGBE_FLAG_FCOE_ENABLED;
+			adapter->ring_feature[RING_F_FCOE].indices =
+				IXGBE_FCRETA_SIZE;
+			netdev->features |= NETIF_F_FCOE_CRC;
+			netdev->features |= NETIF_F_FSO;
+			netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1;
+		}
+#endif /* IXGBE_FCOE */
 		ixgbe_init_interrupt_scheme(adapter);
 		if (netif_running(netdev))
 			netdev->netdev_ops->ndo_open(netdev);
@@ -156,6 +168,18 @@ static u8 ixgbe_dcbnl_set_state(struct net_device *netdev, u8 state)
 			adapter->flags |= IXGBE_FLAG_RSS_ENABLED;
 			if (adapter->hw.mac.type == ixgbe_mac_82599EB)
 				adapter->flags |= IXGBE_FLAG_FDIR_HASH_CAPABLE;
+
+#ifdef IXGBE_FCOE
+			/* Turn off FCoE offload */
+			if (adapter->flags & (IXGBE_FLAG_FCOE_CAPABLE |
+			     IXGBE_FLAG_FCOE_ENABLED)) {
+				adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
+				adapter->ring_feature[RING_F_FCOE].indices = 0;
+				netdev->features &= ~NETIF_F_FCOE_CRC;
+				netdev->features &= ~NETIF_F_FSO;
+				netdev->fcoe_ddp_xid = 0;
+			}
+#endif /* IXGBE_FCOE */
 			ixgbe_init_interrupt_scheme(adapter);
 			if (netif_running(netdev))
 				netdev->netdev_ops->ndo_open(netdev);
diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c
index e3442f4..200454f 100644
--- a/drivers/net/ixgbe/ixgbe_main.c
+++ b/drivers/net/ixgbe/ixgbe_main.c
@@ -34,6 +34,7 @@
 #include <linux/in.h>
 #include <linux/ip.h>
 #include <linux/tcp.h>
+#include <linux/pkt_sched.h>
 #include <linux/ipv6.h>
 #include <net/checksum.h>
 #include <net/ip6_checksum.h>
@@ -510,8 +511,11 @@ static void ixgbe_receive_skb(struct ixgbe_q_vector *q_vector,
  * @skb: skb currently being received and modified
  **/
 static inline void ixgbe_rx_checksum(struct ixgbe_adapter *adapter,
-                                     u32 status_err, struct sk_buff *skb)
+				     union ixgbe_adv_rx_desc *rx_desc,
+				     struct sk_buff *skb)
 {
+	u32 status_err = le32_to_cpu(rx_desc->wb.upper.status_error);
+
 	skb->ip_summed = CHECKSUM_NONE;
 
 	/* Rx csum disabled */
@@ -529,6 +533,16 @@ static inline void ixgbe_rx_checksum(struct ixgbe_adapter *adapter,
 		return;
 
 	if (status_err & IXGBE_RXDADV_ERR_TCPE) {
+		u16 pkt_info = rx_desc->wb.lower.lo_dword.hs_rss.pkt_info;
+
+		/*
+		 * 82599 errata, UDP frames with a 0 checksum can be marked as
+		 * checksum errors.
+		 */
+		if ((pkt_info & IXGBE_RXDADV_PKTTYPE_UDP) &&
+		    (adapter->hw.mac.type == ixgbe_mac_82599EB))
+			return;
+
 		adapter->hw_csum_rx_error++;
 		return;
 	}
@@ -802,7 +816,7 @@ static bool ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector,
 			goto next_desc;
 		}
 
-		ixgbe_rx_checksum(adapter, staterr, skb);
+		ixgbe_rx_checksum(adapter, rx_desc, skb);
 
 		/* probably a little skewed due to removing CRC */
 		total_rx_bytes += skb->len;
@@ -3806,8 +3820,9 @@ static int __devinit ixgbe_sw_init(struct ixgbe_adapter *adapter)
 		adapter->atr_sample_rate = 20;
 		adapter->fdir_pballoc = 0;
 #ifdef IXGBE_FCOE
-		adapter->flags |= IXGBE_FLAG_FCOE_ENABLED;
-		adapter->ring_feature[RING_F_FCOE].indices = IXGBE_FCRETA_SIZE;
+		adapter->flags |= IXGBE_FLAG_FCOE_CAPABLE;
+		adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
+		adapter->ring_feature[RING_F_FCOE].indices = 0;
 #endif /* IXGBE_FCOE */
 	}
 
@@ -5125,9 +5140,6 @@ static int ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 	int count = 0;
 	unsigned int f;
 
-	r_idx = skb->queue_mapping;
-	tx_ring = &adapter->tx_ring[r_idx];
-
 	if (adapter->vlgrp && vlan_tx_tag_present(skb)) {
 		tx_flags |= vlan_tx_tag_get(skb);
 		if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
@@ -5137,11 +5149,19 @@ static int ixgbe_xmit_frame(struct sk_buff *skb, struct net_device *netdev)
 		tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
 		tx_flags |= IXGBE_TX_FLAGS_VLAN;
 	} else if (adapter->flags & IXGBE_FLAG_DCB_ENABLED) {
-		tx_flags |= (skb->queue_mapping << 13);
-		tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
-		tx_flags |= IXGBE_TX_FLAGS_VLAN;
+		if (skb->priority != TC_PRIO_CONTROL) {
+			tx_flags |= (skb->queue_mapping << 13);
+			tx_flags <<= IXGBE_TX_FLAGS_VLAN_SHIFT;
+			tx_flags |= IXGBE_TX_FLAGS_VLAN;
+		} else {
+			skb->queue_mapping =
+				adapter->ring_feature[RING_F_DCB].indices-1;
+		}
 	}
 
+	r_idx = skb->queue_mapping;
+	tx_ring = &adapter->tx_ring[r_idx];
+
 	if ((adapter->flags & IXGBE_FLAG_FCOE_ENABLED) &&
 	    (skb->protocol == htons(ETH_P_FCOE)))
 		tx_flags |= IXGBE_TX_FLAGS_FCOE;
@@ -5580,16 +5600,11 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 #endif
 
 #ifdef IXGBE_FCOE
-	if (adapter->flags & IXGBE_FLAG_FCOE_ENABLED) {
+	if (adapter->flags & IXGBE_FLAG_FCOE_CAPABLE) {
 		if (hw->mac.ops.get_device_caps) {
 			hw->mac.ops.get_device_caps(hw, &device_caps);
-			if (!(device_caps & IXGBE_DEVICE_CAPS_FCOE_OFFLOADS)) {
-				netdev->features |= NETIF_F_FCOE_CRC;
-				netdev->features |= NETIF_F_FSO;
-				netdev->fcoe_ddp_xid = IXGBE_FCOE_DDP_MAX - 1;
-			} else {
-				adapter->flags &= ~IXGBE_FLAG_FCOE_ENABLED;
-			}
+			if (device_caps & IXGBE_DEVICE_CAPS_FCOE_OFFLOADS)
+				adapter->flags &= ~IXGBE_FLAG_FCOE_CAPABLE;
 		}
 	}
 #endif /* IXGBE_FCOE */
@@ -5638,7 +5653,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev,
 		adapter->wol = 0;
 		break;
 	}
-	device_init_wakeup(&adapter->pdev->dev, true);
 	device_set_wakeup_enable(&adapter->pdev->dev, adapter->wol);
 
 	/* pick up the PCI bus settings for reporting later */
diff --git a/drivers/net/netxen/netxen_nic_init.c b/drivers/net/netxen/netxen_nic_init.c
index 5d3343e..7acf204 100644
--- a/drivers/net/netxen/netxen_nic_init.c
+++ b/drivers/net/netxen/netxen_nic_init.c
@@ -184,6 +184,13 @@ void netxen_free_sw_resources(struct netxen_adapter *adapter)
 	kfree(recv_ctx->rds_rings);
 
 skip_rds:
+	if (recv_ctx->sds_rings == NULL)
+		goto skip_sds;
+
+	for(ring = 0; ring < adapter->max_sds_rings; ring++)
+		recv_ctx->sds_rings[ring].consumer = 0;
+
+skip_sds:
 	if (adapter->tx_ring == NULL)
 		return;
 
diff --git a/drivers/net/phy/mdio-gpio.c b/drivers/net/phy/mdio-gpio.c
index 33984b7..22cdd45 100644
--- a/drivers/net/phy/mdio-gpio.c
+++ b/drivers/net/phy/mdio-gpio.c
@@ -30,6 +30,7 @@
 
 #ifdef CONFIG_OF_GPIO
 #include <linux/of_gpio.h>
+#include <linux/of_mdio.h>
 #include <linux/of_platform.h>
 #endif
 
@@ -81,13 +82,12 @@ static struct mdiobb_ops mdio_gpio_ops = {
 	.get_mdio_data = mdio_get,
 };
 
-static int __devinit mdio_gpio_bus_init(struct device *dev,
+static struct mii_bus * __devinit mdio_gpio_bus_init(struct device *dev,
 					struct mdio_gpio_platform_data *pdata,
 					int bus_id)
 {
 	struct mii_bus *new_bus;
 	struct mdio_gpio_info *bitbang;
-	int ret = -ENOMEM;
 	int i;
 
 	bitbang = kzalloc(sizeof(*bitbang), GFP_KERNEL);
@@ -104,8 +104,6 @@ static int __devinit mdio_gpio_bus_init(struct device *dev,
 
 	new_bus->name = "GPIO Bitbanged MDIO",
 
-	ret = -ENODEV;
-
 	new_bus->phy_mask = pdata->phy_mask;
 	new_bus->irq = pdata->irqs;
 	new_bus->parent = dev;
@@ -129,15 +127,8 @@ static int __devinit mdio_gpio_bus_init(struct device *dev,
 
 	dev_set_drvdata(dev, new_bus);
 
-	ret = mdiobus_register(new_bus);
-	if (ret)
-		goto out_free_all;
-
-	return 0;
+	return new_bus;
 
-out_free_all:
-	dev_set_drvdata(dev, NULL);
-	gpio_free(bitbang->mdio);
 out_free_mdc:
 	gpio_free(bitbang->mdc);
 out_free_bus:
@@ -145,30 +136,47 @@ out_free_bus:
 out_free_bitbang:
 	kfree(bitbang);
 out:
-	return ret;
+	return NULL;
 }
 
-static void __devexit mdio_gpio_bus_destroy(struct device *dev)
+static void __devinit mdio_gpio_bus_deinit(struct device *dev)
 {
 	struct mii_bus *bus = dev_get_drvdata(dev);
 	struct mdio_gpio_info *bitbang = bus->priv;
 
-	mdiobus_unregister(bus);
-	free_mdio_bitbang(bus);
 	dev_set_drvdata(dev, NULL);
-	gpio_free(bitbang->mdc);
 	gpio_free(bitbang->mdio);
+	gpio_free(bitbang->mdc);
+	free_mdio_bitbang(bus);
 	kfree(bitbang);
 }
 
+static void __devexit mdio_gpio_bus_destroy(struct device *dev)
+{
+	struct mii_bus *bus = dev_get_drvdata(dev);
+
+	mdiobus_unregister(bus);
+	mdio_gpio_bus_deinit(dev);
+}
+
 static int __devinit mdio_gpio_probe(struct platform_device *pdev)
 {
 	struct mdio_gpio_platform_data *pdata = pdev->dev.platform_data;
+	struct mii_bus *new_bus;
+	int ret;
 
 	if (!pdata)
 		return -ENODEV;
 
-	return mdio_gpio_bus_init(&pdev->dev, pdata, pdev->id);
+	new_bus = mdio_gpio_bus_init(&pdev->dev, pdata, pdev->id);
+	if (!new_bus)
+		return -ENODEV;
+
+	ret = mdiobus_register(new_bus);
+	if (ret)
+		mdio_gpio_bus_deinit(&pdev->dev);
+
+	return ret;
 }
 
 static int __devexit mdio_gpio_remove(struct platform_device *pdev)
@@ -179,29 +187,12 @@ static int __devexit mdio_gpio_remove(struct platform_device *pdev)
 }
 
 #ifdef CONFIG_OF_GPIO
-static void __devinit add_phy(struct mdio_gpio_platform_data *pdata,
-			      struct device_node *np)
-{
-	const u32 *data;
-	int len, id, irq;
-
-	data = of_get_property(np, "reg", &len);
-	if (!data || len != 4)
-		return;
-
-	id = *data;
-	pdata->phy_mask &= ~(1 << id);
-
-	irq = of_irq_to_resource(np, 0, NULL);
-	if (irq)
-		pdata->irqs[id] = irq;
-}
 
 static int __devinit mdio_ofgpio_probe(struct of_device *ofdev,
                                         const struct of_device_id *match)
 {
-	struct device_node *np = NULL;
 	struct mdio_gpio_platform_data *pdata;
+	struct mii_bus *new_bus;
 	int ret;
 
 	pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
@@ -215,14 +206,18 @@ static int __devinit mdio_ofgpio_probe(struct of_device *ofdev,
 
 	ret = of_get_gpio(ofdev->node, 1);
 	if (ret < 0)
-                goto out_free;
+		goto out_free;
 	pdata->mdio = ret;
 
-	while ((np = of_get_next_child(ofdev->node, np)))
-		if (!strcmp(np->type, "ethernet-phy"))
-			add_phy(pdata, np);
+	new_bus = mdio_gpio_bus_init(&ofdev->dev, pdata, pdata->mdc);
+	if (!new_bus)
+		return -ENODEV;
 
-	return mdio_gpio_bus_init(&ofdev->dev, pdata, pdata->mdc);
+	ret = of_mdiobus_register(new_bus, ofdev->node);
+	if (ret)
+		mdio_gpio_bus_deinit(&ofdev->dev);
+
+	return ret;
 
 out_free:
 	kfree(pdata);
diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c
index 4b53b58..b82780d 100644
--- a/drivers/net/r8169.c
+++ b/drivers/net/r8169.c
@@ -2060,8 +2060,6 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 		}
 	}
 
-	pci_set_master(pdev);
-
 	/* ioremap MMIO region */
 	ioaddr = ioremap(pci_resource_start(pdev, region), R8169_REGS_SIZE);
 	if (!ioaddr) {
@@ -2089,6 +2087,8 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 
 	RTL_W16(IntrStatus, 0xffff);
 
+	pci_set_master(pdev);
+
 	/* Identify chip attached to board */
 	rtl8169_get_mac_version(tp, ioaddr);
 
@@ -3874,6 +3874,15 @@ static void rtl_shutdown(struct pci_dev *pdev)
 	spin_unlock_irq(&tp->lock);
 
 	if (system_state == SYSTEM_POWER_OFF) {
+		/* WoL fails with some 8168 when the receiver is disabled. */
+		if (tp->features & RTL_FEATURE_WOL) {
+			pci_clear_master(pdev);
+
+			RTL_W8(ChipCmd, CmdRxEnb);
+			/* PCI commit */
+			RTL_R8(ChipCmd);
+		}
+
 		pci_wake_from_d3(pdev, true);
 		pci_set_power_state(pdev, PCI_D3hot);
 	}
diff --git a/drivers/net/skge.c b/drivers/net/skge.c
index 60d502e..543af20 100644
--- a/drivers/net/skge.c
+++ b/drivers/net/skge.c
@@ -3854,8 +3854,10 @@ static struct net_device *skge_devinit(struct skge_hw *hw, int port,
 	skge->speed = -1;
 	skge->advertising = skge_supported_modes(hw);
 
-	if (device_may_wakeup(&hw->pdev->dev))
+	if (device_can_wakeup(&hw->pdev->dev)) {
 		skge->wol = wol_supported(hw) & WAKE_MAGIC;
+		device_set_wakeup_enable(&hw->pdev->dev, skge->wol);
+	}
 
 	hw->dev[port] = dev;
 
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index f1f773b..57a159f 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -186,7 +186,8 @@ static inline void SMC_outw(u16 val, void __iomem *ioaddr, int reg)
 #define SMC_outsb(a, r, p, l)	writesb((a) + (r), p, (l))
 #define SMC_IRQ_FLAGS		(-1)	/* from resource */
 
-#elif	defined(CONFIG_MACH_LOGICPD_PXA270)
+#elif	defined(CONFIG_MACH_LOGICPD_PXA270) \
+	|| defined(CONFIG_MACH_NOMADIK_8815NHK)
 
 #define SMC_CAN_USE_8BIT	0
 #define SMC_CAN_USE_16BIT	1
diff --git a/drivers/net/tokenring/ibmtr.c b/drivers/net/tokenring/ibmtr.c
index 9d89611..08a6c41 100644
--- a/drivers/net/tokenring/ibmtr.c
+++ b/drivers/net/tokenring/ibmtr.c
@@ -1912,7 +1912,7 @@ static int __init ibmtr_init(void)
 
 	find_turbo_adapters(io);
 
-	for (i = 0; io[i] && (i < IBMTR_MAX_ADAPTERS); i++) {
+	for (i = 0; i < IBMTR_MAX_ADAPTERS && io[i]; i++) {
 		struct net_device *dev;
 		irq[i] = 0;
 		mem[i] = 0;
diff --git a/drivers/net/ucc_geth.c b/drivers/net/ucc_geth.c
index 40c6eba..3b957e6 100644
--- a/drivers/net/ucc_geth.c
+++ b/drivers/net/ucc_geth.c
@@ -1590,13 +1590,13 @@ static int init_phy(struct net_device *dev)
 	priv->oldspeed = 0;
 	priv->oldduplex = -1;
 
-	if (!ug_info->phy_node)
-		return 0;
-
 	phydev = of_phy_connect(dev, ug_info->phy_node, &adjust_link, 0,
 				priv->phy_interface);
+	if (!phydev)
+		phydev = of_phy_connect_fixed_link(dev, &adjust_link,
+						   priv->phy_interface);
 	if (!phydev) {
-		printk("%s: Could not attach to PHY\n", dev->name);
+		dev_err(&dev->dev, "Could not attach to PHY\n");
 		return -ENODEV;
 	}
 
@@ -3608,9 +3608,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 	struct ucc_geth_private *ugeth = NULL;
 	struct ucc_geth_info *ug_info;
 	struct resource res;
-	struct device_node *phy;
 	int err, ucc_num, max_speed = 0;
-	const u32 *fixed_link;
 	const unsigned int *prop;
 	const char *sprop;
 	const void *mac_addr;
@@ -3708,15 +3706,8 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 
 	ug_info->uf_info.regs = res.start;
 	ug_info->uf_info.irq = irq_of_parse_and_map(np, 0);
-	fixed_link = of_get_property(np, "fixed-link", NULL);
-	if (fixed_link) {
-		phy = NULL;
-	} else {
-		phy = of_parse_phandle(np, "phy-handle", 0);
-		if (phy == NULL)
-			return -ENODEV;
-	}
-	ug_info->phy_node = phy;
+
+	ug_info->phy_node = of_parse_phandle(np, "phy-handle", 0);
 
 	/* Find the TBI PHY node.  If it's not there, we don't support SGMII */
 	ug_info->tbi_node = of_parse_phandle(np, "tbi-handle", 0);
@@ -3725,7 +3716,7 @@ static int ucc_geth_probe(struct of_device* ofdev, const struct of_device_id *ma
 	prop = of_get_property(np, "phy-connection-type", NULL);
 	if (!prop) {
 		/* handle interface property present in old trees */
-		prop = of_get_property(phy, "interface", NULL);
+		prop = of_get_property(ug_info->phy_node, "interface", NULL);
 		if (prop != NULL) {
 			phy_interface = enet_to_phy_interface[*prop];
 			max_speed = enet_to_speed[*prop];
diff --git a/drivers/net/wireless/ath/ath5k/base.c b/drivers/net/wireless/ath/ath5k/base.c
index ea04515..029c1bc 100644
--- a/drivers/net/wireless/ath/ath5k/base.c
+++ b/drivers/net/wireless/ath/ath5k/base.c
@@ -2970,6 +2970,9 @@ ath5k_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd,
 	if (modparam_nohwcrypt)
 		return -EOPNOTSUPP;
 
+	if (sc->opmode == NL80211_IFTYPE_AP)
+		return -EOPNOTSUPP;
+
 	switch (key->alg) {
 	case ALG_WEP:
 	case ALG_TKIP:
diff --git a/drivers/net/wireless/ath/ath9k/ani.c b/drivers/net/wireless/ath/ath9k/ani.c
index 1aeafb5..aad259b 100644
--- a/drivers/net/wireless/ath/ath9k/ani.c
+++ b/drivers/net/wireless/ath/ath9k/ani.c
@@ -478,6 +478,18 @@ void ath9k_ani_reset(struct ath_hw *ah)
 			"Reset ANI state opmode %u\n", ah->opmode);
 		ah->stats.ast_ani_reset++;
 
+		if (ah->opmode == NL80211_IFTYPE_AP) {
+			/*
+			 * ath9k_hw_ani_control() will only process items set on
+			 * ah->ani_function
+			 */
+			if (IS_CHAN_2GHZ(chan))
+				ah->ani_function = (ATH9K_ANI_SPUR_IMMUNITY_LEVEL |
+						    ATH9K_ANI_FIRSTEP_LEVEL);
+			else
+				ah->ani_function = 0;
+		}
+
 		ath9k_hw_ani_control(ah, ATH9K_ANI_NOISE_IMMUNITY_LEVEL, 0);
 		ath9k_hw_ani_control(ah, ATH9K_ANI_SPUR_IMMUNITY_LEVEL, 0);
 		ath9k_hw_ani_control(ah, ATH9K_ANI_FIRSTEP_LEVEL, 0);
diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index eef370bd..bf3d25b 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -474,6 +474,21 @@ ath_regd_init_wiphy(struct ath_regulatory *reg,
 	return 0;
 }
 
+/*
+ * Some users have reported their EEPROM programmed with
+ * 0x8000 set, this is not a supported regulatory domain
+ * but since we have more than one user with it we need
+ * a solution for them. We default to 0x64, which is the
+ * default Atheros world regulatory domain.
+ */
+static void ath_regd_sanitize(struct ath_regulatory *reg)
+{
+	if (reg->current_rd != COUNTRY_ERD_FLAG)
+		return;
+	printk(KERN_DEBUG "ath: EEPROM regdomain sanitized\n");
+	reg->current_rd = 0x64;
+}
+
 int
 ath_regd_init(struct ath_regulatory *reg,
 	      struct wiphy *wiphy,
@@ -486,6 +501,8 @@ ath_regd_init(struct ath_regulatory *reg,
 	if (!reg)
 		return -EINVAL;
 
+	ath_regd_sanitize(reg);
+
 	printk(KERN_DEBUG "ath: EEPROM regdomain: 0x%0x\n", reg->current_rd);
 
 	if (!ath_regd_is_eeprom_valid(reg)) {
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 6d1519e..355f50e 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -2675,12 +2675,10 @@ static ssize_t show_power_level(struct device *d,
 				struct device_attribute *attr, char *buf)
 {
 	struct iwl_priv *priv = dev_get_drvdata(d);
-	int mode = priv->power_data.user_power_setting;
 	int level = priv->power_data.power_mode;
 	char *p = buf;
 
-	p += sprintf(p, "INDEX:%d\t", level);
-	p += sprintf(p, "USER:%d\n", mode);
+	p += sprintf(p, "%d\n", level);
 	return p - buf + 1;
 }
 
diff --git a/drivers/net/wireless/iwlwifi/iwl-tx.c b/drivers/net/wireless/iwlwifi/iwl-tx.c
index 85ae7a6..9bbeec9 100644
--- a/drivers/net/wireless/iwlwifi/iwl-tx.c
+++ b/drivers/net/wireless/iwlwifi/iwl-tx.c
@@ -872,7 +872,8 @@ int iwl_tx_skb(struct iwl_priv *priv, struct sk_buff *skb)
 	iwl_print_hex_dump(priv, IWL_DL_TX, (u8 *)tx_cmd->hdr, hdr_len);
 
 	/* Set up entry for this TFD in Tx byte-count array */
-	priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq,
+	if (info->flags & IEEE80211_TX_CTL_AMPDU)
+		priv->cfg->ops->lib->txq_update_byte_cnt_tbl(priv, txq,
 						     le16_to_cpu(tx_cmd->len));
 
 	pci_dma_sync_single_for_device(priv->pci_dev, txcmd_phys,
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index cb9bd4c..956798f 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -3643,12 +3643,10 @@ static ssize_t show_power_level(struct device *d,
 				struct device_attribute *attr, char *buf)
 {
 	struct iwl_priv *priv = dev_get_drvdata(d);
-	int mode = priv->power_data.user_power_setting;
 	int level = priv->power_data.power_mode;
 	char *p = buf;
 
-	p += sprintf(p, "INDEX:%d\t", level);
-	p += sprintf(p, "USER:%d\n", mode);
+	p += sprintf(p, "%d\n", level);
 	return p - buf + 1;
 }
 
diff --git a/drivers/net/wireless/iwmc3200wifi/netdev.c b/drivers/net/wireless/iwmc3200wifi/netdev.c
index aaa20c6..aea5ccf 100644
--- a/drivers/net/wireless/iwmc3200wifi/netdev.c
+++ b/drivers/net/wireless/iwmc3200wifi/netdev.c
@@ -151,8 +151,8 @@ void iwm_if_free(struct iwm_priv *iwm)
 		return;
 
 	free_netdev(iwm_to_ndev(iwm));
-	iwm_wdev_free(iwm);
 	iwm_priv_deinit(iwm);
+	iwm_wdev_free(iwm);
 }
 
 int iwm_if_add(struct iwm_priv *iwm)
diff --git a/drivers/net/wireless/libertas/cmd.c b/drivers/net/wireless/libertas/cmd.c
index 01db705..6850981 100644
--- a/drivers/net/wireless/libertas/cmd.c
+++ b/drivers/net/wireless/libertas/cmd.c
@@ -135,8 +135,14 @@ int lbs_update_hw_spec(struct lbs_private *priv)
 	/* Clamp region code to 8-bit since FW spec indicates that it should
 	 * only ever be 8-bit, even though the field size is 16-bit.  Some firmware
 	 * returns non-zero high 8 bits here.
+	 *
+	 * Firmware version 4.0.102 used in CF8381 has region code shifted.  We
+	 * need to check for this problem and handle it properly.
 	 */
-	priv->regioncode = le16_to_cpu(cmd.regioncode) & 0xFF;
+	if (MRVL_FW_MAJOR_REV(priv->fwrelease) == MRVL_FW_V4)
+		priv->regioncode = (le16_to_cpu(cmd.regioncode) >> 8) & 0xFF;
+	else
+		priv->regioncode = le16_to_cpu(cmd.regioncode) & 0xFF;
 
 	for (i = 0; i < MRVDRV_MAX_REGION_CODE; i++) {
 		/* use the region code to search for the index */
diff --git a/drivers/net/wireless/libertas/defs.h b/drivers/net/wireless/libertas/defs.h
index 48da157..72f3479 100644
--- a/drivers/net/wireless/libertas/defs.h
+++ b/drivers/net/wireless/libertas/defs.h
@@ -234,6 +234,8 @@ static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, in
 /** Mesh enable bit in FW capability */
 #define MESH_CAPINFO_ENABLE_MASK			(1<<16)
 
+/** FW definition from Marvell v4 */
+#define MRVL_FW_V4					(0x04)
 /** FW definition from Marvell v5 */
 #define MRVL_FW_V5					(0x05)
 /** FW definition from Marvell v10 */
diff --git a/drivers/net/wireless/mac80211_hwsim.c b/drivers/net/wireless/mac80211_hwsim.c
index a111bda..7916ca3 100644
--- a/drivers/net/wireless/mac80211_hwsim.c
+++ b/drivers/net/wireless/mac80211_hwsim.c
@@ -709,7 +709,7 @@ static const struct ieee80211_ops mac80211_hwsim_ops =
 static void mac80211_hwsim_free(void)
 {
 	struct list_head tmplist, *i, *tmp;
-	struct mac80211_hwsim_data *data;
+	struct mac80211_hwsim_data *data, *tmpdata;
 
 	INIT_LIST_HEAD(&tmplist);
 
@@ -718,7 +718,7 @@ static void mac80211_hwsim_free(void)
 		list_move(i, &tmplist);
 	spin_unlock_bh(&hwsim_radio_lock);
 
-	list_for_each_entry(data, &tmplist, list) {
+	list_for_each_entry_safe(data, tmpdata, &tmplist, list) {
 		debugfs_remove(data->debugfs_group);
 		debugfs_remove(data->debugfs_ps);
 		debugfs_remove(data->debugfs);
@@ -1167,8 +1167,8 @@ static void __exit exit_mac80211_hwsim(void)
 {
 	printk(KERN_DEBUG "mac80211_hwsim: unregister radios\n");
 
-	unregister_netdev(hwsim_mon);
 	mac80211_hwsim_free();
+	unregister_netdev(hwsim_mon);
 }
 
 
diff --git a/drivers/net/wireless/p54/p54spi.c b/drivers/net/wireless/p54/p54spi.c
index 83116ba..72c7dbd 100644
--- a/drivers/net/wireless/p54/p54spi.c
+++ b/drivers/net/wireless/p54/p54spi.c
@@ -635,7 +635,7 @@ static int __devinit p54spi_probe(struct spi_device *spi)
 
 	hw = p54_init_common(sizeof(*priv));
 	if (!hw) {
-		dev_err(&priv->spi->dev, "could not alloc ieee80211_hw");
+		dev_err(&spi->dev, "could not alloc ieee80211_hw");
 		return -ENOMEM;
 	}
 
diff --git a/drivers/net/wireless/rt2x00/rt2500usb.c b/drivers/net/wireless/rt2x00/rt2500usb.c
index 66daf68..ce75426 100644
--- a/drivers/net/wireless/rt2x00/rt2500usb.c
+++ b/drivers/net/wireless/rt2x00/rt2500usb.c
@@ -1550,7 +1550,9 @@ static int rt2500usb_init_eeprom(struct rt2x00_dev *rt2x00dev)
 	rt2500usb_register_read(rt2x00dev, MAC_CSR0, &reg);
 	rt2x00_set_chip(rt2x00dev, RT2570, value, reg);
 
-	if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0)) {
+	if (!rt2x00_check_rev(&rt2x00dev->chip, 0x000ffff0, 0) ||
+	    rt2x00_check_rev(&rt2x00dev->chip, 0x0000000f, 0)) {
+
 		ERROR(rt2x00dev, "Invalid RT chipset detected.\n");
 		return -ENODEV;
 	}
diff --git a/drivers/net/wireless/rtl818x/rtl8187_leds.c b/drivers/net/wireless/rtl818x/rtl8187_leds.c
index b442535..cf9f899 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_leds.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_leds.c
@@ -208,11 +208,12 @@ void rtl8187_leds_exit(struct ieee80211_hw *dev)
 {
 	struct rtl8187_priv *priv = dev->priv;
 
-	rtl8187_unregister_led(&priv->led_tx);
 	/* turn the LED off before exiting */
 	queue_delayed_work(dev->workqueue, &priv->led_off, 0);
 	cancel_delayed_work_sync(&priv->led_off);
+	cancel_delayed_work_sync(&priv->led_on);
 	rtl8187_unregister_led(&priv->led_rx);
+	rtl8187_unregister_led(&priv->led_tx);
 }
 #endif /* def CONFIG_RTL8187_LED */
 
diff --git a/drivers/of/of_mdio.c b/drivers/of/of_mdio.c
index aee967d..bacaa53 100644
--- a/drivers/of/of_mdio.c
+++ b/drivers/of/of_mdio.c
@@ -9,6 +9,10 @@
  * out of the OpenFirmware device tree and using it to populate an mii_bus.
  */
 
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/netdevice.h>
+#include <linux/err.h>
 #include <linux/phy.h>
 #include <linux/of.h>
 #include <linux/of_mdio.h>
@@ -137,3 +141,41 @@ struct phy_device *of_phy_connect(struct net_device *dev,
 	return phy_connect_direct(dev, phy, hndlr, flags, iface) ? NULL : phy;
 }
 EXPORT_SYMBOL(of_phy_connect);
+
+/**
+ * of_phy_connect_fixed_link - Parse fixed-link property and return a dummy phy
+ * @dev: pointer to net_device claiming the phy
+ * @hndlr: Link state callback for the network device
+ * @iface: PHY data interface type
+ *
+ * This function is a temporary stop-gap and will be removed soon.  It is
+ * only to support the fs_enet, ucc_geth and gianfar Ethernet drivers.  Do
+ * not call this function from new drivers.
+ */
+struct phy_device *of_phy_connect_fixed_link(struct net_device *dev,
+					     void (*hndlr)(struct net_device *),
+					     phy_interface_t iface)
+{
+	struct device_node *net_np;
+	char bus_id[MII_BUS_ID_SIZE + 3];
+	struct phy_device *phy;
+	const u32 *phy_id;
+	int sz;
+
+	if (!dev->dev.parent)
+		return NULL;
+
+	net_np = dev_archdata_get_node(&dev->dev.parent->archdata);
+	if (!net_np)
+		return NULL;
+
+	phy_id = of_get_property(net_np, "fixed-link", &sz);
+	if (!phy_id || sz < sizeof(*phy_id))
+		return NULL;
+
+	sprintf(bus_id, PHY_ID_FMT, "0", phy_id[0]);
+
+	phy = phy_connect(dev, bus_id, hndlr, 0, iface);
+	return IS_ERR(phy) ? NULL : phy;
+}
+EXPORT_SYMBOL(of_phy_connect_fixed_link);
diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c
index be2fd6f..fb45f5e 100644
--- a/drivers/platform/x86/acer-wmi.c
+++ b/drivers/platform/x86/acer-wmi.c
@@ -973,7 +973,7 @@ static int acer_rfkill_set(void *data, bool blocked)
 {
 	acpi_status status;
 	u32 cap = (unsigned long)data;
-	status = set_u32(!!blocked, cap);
+	status = set_u32(!blocked, cap);
 	if (ACPI_FAILURE(status))
 		return -ENODEV;
 	return 0;
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index 7eda348..bdbc4f7 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -43,6 +43,13 @@ config BATTERY_DS2760
 	help
 	  Say Y here to enable support for batteries with ds2760 chip.
 
+config BATTERY_DS2782
+	tristate "DS2782 standalone gas-gauge"
+	depends on I2C
+	help
+	  Say Y here to enable support for the DS2782 standalone battery
+	  gas-gauge.
+
 config BATTERY_PMU
 	tristate "Apple PMU battery"
 	depends on PPC32 && ADB_PMU
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index daf3179..380d17c 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -19,6 +19,7 @@ obj-$(CONFIG_APM_POWER)		+= apm_power.o
 obj-$(CONFIG_WM8350_POWER)	+= wm8350_power.o
 
 obj-$(CONFIG_BATTERY_DS2760)	+= ds2760_battery.o
+obj-$(CONFIG_BATTERY_DS2782)	+= ds2782_battery.o
 obj-$(CONFIG_BATTERY_PMU)	+= pmu_battery.o
 obj-$(CONFIG_BATTERY_OLPC)	+= olpc_battery.o
 obj-$(CONFIG_BATTERY_TOSA)	+= tosa_battery.o
diff --git a/drivers/power/ds2782_battery.c b/drivers/power/ds2782_battery.c
new file mode 100644
index 0000000..da14f37
--- /dev/null
+++ b/drivers/power/ds2782_battery.c
@@ -0,0 +1,330 @@
+/*
+ * I2C client/driver for the Maxim/Dallas DS2782 Stand-Alone Fuel Gauge IC
+ *
+ * Copyright (C) 2009 Bluewater Systems Ltd
+ *
+ * Author: Ryan Mallon <ryan@bluewatersys.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/swab.h>
+#include <linux/i2c.h>
+#include <linux/idr.h>
+#include <linux/power_supply.h>
+
+#define DS2782_REG_RARC		0x06	/* Remaining active relative capacity */
+
+#define DS2782_REG_VOLT_MSB	0x0c
+#define DS2782_REG_TEMP_MSB	0x0a
+#define DS2782_REG_CURRENT_MSB	0x0e
+
+/* EEPROM Block */
+#define DS2782_REG_RSNSP	0x69	/* Sense resistor value */
+
+/* Current unit measurement in uA for a 1 milli-ohm sense resistor */
+#define DS2782_CURRENT_UNITS	1563
+
+#define to_ds2782_info(x) container_of(x, struct ds2782_info, battery)
+
+struct ds2782_info {
+	struct i2c_client	*client;
+	struct power_supply	battery;
+	int			id;
+};
+
+static DEFINE_IDR(battery_id);
+static DEFINE_MUTEX(battery_lock);
+
+static inline int ds2782_read_reg(struct ds2782_info *info, int reg, u8 *val)
+{
+	int ret;
+
+	ret = i2c_smbus_read_byte_data(info->client, reg);
+	if (ret < 0) {
+		dev_err(&info->client->dev, "register read failed\n");
+		return ret;
+	}
+
+	*val = ret;
+	return 0;
+}
+
+static inline int ds2782_read_reg16(struct ds2782_info *info, int reg_msb,
+				    s16 *val)
+{
+	int ret;
+
+	ret = swab16(i2c_smbus_read_word_data(info->client, reg_msb));
+	if (ret < 0) {
+		dev_err(&info->client->dev, "register read failed\n");
+		return ret;
+	}
+
+	*val = ret;
+	return 0;
+}
+
+static int ds2782_get_temp(struct ds2782_info *info, int *temp)
+{
+	s16 raw;
+	int err;
+
+	/*
+	 * Temperature is measured in units of 0.125 degrees celcius, the
+	 * power_supply class measures temperature in tenths of degrees
+	 * celsius. The temperature value is stored as a 10 bit number, plus
+	 * sign in the upper bits of a 16 bit register.
+	 */
+	err = ds2782_read_reg16(info, DS2782_REG_TEMP_MSB, &raw);
+	if (err)
+		return err;
+	*temp = ((raw / 32) * 125) / 100;
+	return 0;
+}
+
+static int ds2782_get_current(struct ds2782_info *info, int *current_uA)
+{
+	int sense_res;
+	int err;
+	u8 sense_res_raw;
+	s16 raw;
+
+	/*
+	 * The units of measurement for current are dependent on the value of
+	 * the sense resistor.
+	 */
+	err = ds2782_read_reg(info, DS2782_REG_RSNSP, &sense_res_raw);
+	if (err)
+		return err;
+	if (sense_res_raw == 0) {
+		dev_err(&info->client->dev, "sense resistor value is 0\n");
+		return -ENXIO;
+	}
+	sense_res = 1000 / sense_res_raw;
+
+	dev_dbg(&info->client->dev, "sense resistor = %d milli-ohms\n",
+		sense_res);
+	err = ds2782_read_reg16(info, DS2782_REG_CURRENT_MSB, &raw);
+	if (err)
+		return err;
+	*current_uA = raw * (DS2782_CURRENT_UNITS / sense_res);
+	return 0;
+}
+
+static int ds2782_get_voltage(struct ds2782_info *info, int *voltage_uA)
+{
+	s16 raw;
+	int err;
+
+	/*
+	 * Voltage is measured in units of 4.88mV. The voltage is stored as
+	 * a 10-bit number plus sign, in the upper bits of a 16-bit register
+	 */
+	err = ds2782_read_reg16(info, DS2782_REG_VOLT_MSB, &raw);
+	if (err)
+		return err;
+	*voltage_uA = (raw / 32) * 4800;
+	return 0;
+}
+
+static int ds2782_get_capacity(struct ds2782_info *info, int *capacity)
+{
+	int err;
+	u8 raw;
+
+	err = ds2782_read_reg(info, DS2782_REG_RARC, &raw);
+	if (err)
+		return err;
+	*capacity = raw;
+	return raw;
+}
+
+static int ds2782_get_status(struct ds2782_info *info, int *status)
+{
+	int err;
+	int current_uA;
+	int capacity;
+
+	err = ds2782_get_current(info, &current_uA);
+	if (err)
+		return err;
+
+	err = ds2782_get_capacity(info, &capacity);
+	if (err)
+		return err;
+
+	if (capacity == 100)
+		*status = POWER_SUPPLY_STATUS_FULL;
+	else if (current_uA == 0)
+		*status = POWER_SUPPLY_STATUS_NOT_CHARGING;
+	else if (current_uA < 0)
+		*status = POWER_SUPPLY_STATUS_DISCHARGING;
+	else
+		*status = POWER_SUPPLY_STATUS_CHARGING;
+
+	return 0;
+}
+
+static int ds2782_battery_get_property(struct power_supply *psy,
+				       enum power_supply_property prop,
+				       union power_supply_propval *val)
+{
+	struct ds2782_info *info = to_ds2782_info(psy);
+	int ret;
+
+	switch (prop) {
+	case POWER_SUPPLY_PROP_STATUS:
+		ret = ds2782_get_status(info, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_CAPACITY:
+		ret = ds2782_get_capacity(info, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+		ret = ds2782_get_voltage(info, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_CURRENT_NOW:
+		ret = ds2782_get_current(info, &val->intval);
+		break;
+
+	case POWER_SUPPLY_PROP_TEMP:
+		ret = ds2782_get_temp(info, &val->intval);
+		break;
+
+	default:
+		ret = -EINVAL;
+	}
+
+	return ret;
+}
+
+static enum power_supply_property ds2782_battery_props[] = {
+	POWER_SUPPLY_PROP_STATUS,
+	POWER_SUPPLY_PROP_CAPACITY,
+	POWER_SUPPLY_PROP_VOLTAGE_NOW,
+	POWER_SUPPLY_PROP_CURRENT_NOW,
+	POWER_SUPPLY_PROP_TEMP,
+};
+
+static void ds2782_power_supply_init(struct power_supply *battery)
+{
+	battery->type			= POWER_SUPPLY_TYPE_BATTERY;
+	battery->properties		= ds2782_battery_props;
+	battery->num_properties		= ARRAY_SIZE(ds2782_battery_props);
+	battery->get_property		= ds2782_battery_get_property;
+	battery->external_power_changed	= NULL;
+}
+
+static int ds2782_battery_remove(struct i2c_client *client)
+{
+	struct ds2782_info *info = i2c_get_clientdata(client);
+
+	power_supply_unregister(&info->battery);
+	kfree(info->battery.name);
+
+	mutex_lock(&battery_lock);
+	idr_remove(&battery_id, info->id);
+	mutex_unlock(&battery_lock);
+
+	i2c_set_clientdata(client, info);
+
+	kfree(info);
+	return 0;
+}
+
+static int ds2782_battery_probe(struct i2c_client *client,
+				const struct i2c_device_id *id)
+{
+	struct ds2782_info *info;
+	int ret;
+	int num;
+
+	/* Get an ID for this battery */
+	ret = idr_pre_get(&battery_id, GFP_KERNEL);
+	if (ret == 0) {
+		ret = -ENOMEM;
+		goto fail_id;
+	}
+
+	mutex_lock(&battery_lock);
+	ret = idr_get_new(&battery_id, client, &num);
+	mutex_unlock(&battery_lock);
+	if (ret < 0)
+		goto fail_id;
+
+	info = kzalloc(sizeof(*info), GFP_KERNEL);
+	if (!info) {
+		ret = -ENOMEM;
+		goto fail_info;
+	}
+
+	info->battery.name = kasprintf(GFP_KERNEL, "ds2782-%d", num);
+	if (!info->battery.name) {
+		ret = -ENOMEM;
+		goto fail_name;
+	}
+
+	i2c_set_clientdata(client, info);
+	info->client = client;
+	ds2782_power_supply_init(&info->battery);
+
+	ret = power_supply_register(&client->dev, &info->battery);
+	if (ret) {
+		dev_err(&client->dev, "failed to register battery\n");
+		goto fail_register;
+	}
+
+	return 0;
+
+fail_register:
+	kfree(info->battery.name);
+fail_name:
+	i2c_set_clientdata(client, info);
+	kfree(info);
+fail_info:
+	mutex_lock(&battery_lock);
+	idr_remove(&battery_id, num);
+	mutex_unlock(&battery_lock);
+fail_id:
+	return ret;
+}
+
+static const struct i2c_device_id ds2782_id[] = {
+	{"ds2782", 0},
+	{},
+};
+
+static struct i2c_driver ds2782_battery_driver = {
+	.driver 	= {
+		.name	= "ds2782-battery",
+	},
+	.probe		= ds2782_battery_probe,
+	.remove		= ds2782_battery_remove,
+	.id_table	= ds2782_id,
+};
+
+static int __init ds2782_init(void)
+{
+	return i2c_add_driver(&ds2782_battery_driver);
+}
+module_init(ds2782_init);
+
+static void __exit ds2782_exit(void)
+{
+	i2c_del_driver(&ds2782_battery_driver);
+}
+module_exit(ds2782_exit);
+
+MODULE_AUTHOR("Ryan Mallon <ryan@bluewatersys.com>");
+MODULE_DESCRIPTION("Maxim/Dallas DS2782 Stand-Alone Fuel Gauage IC driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/power/olpc_battery.c b/drivers/power/olpc_battery.c
index 5fbca26..58e4192 100644
--- a/drivers/power/olpc_battery.c
+++ b/drivers/power/olpc_battery.c
@@ -8,6 +8,7 @@
  * published by the Free Software Foundation.
  */
 
+#include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/err.h>
 #include <linux/platform_device.h>
@@ -35,6 +36,7 @@
 #define BAT_STAT_AC		0x10
 #define BAT_STAT_CHARGING	0x20
 #define BAT_STAT_DISCHARGING	0x40
+#define BAT_STAT_TRICKLE	0x80
 
 #define BAT_ERR_INFOFAIL	0x02
 #define BAT_ERR_OVERVOLTAGE	0x04
@@ -89,7 +91,7 @@ static char bat_serial[17]; /* Ick */
 static int olpc_bat_get_status(union power_supply_propval *val, uint8_t ec_byte)
 {
 	if (olpc_platform_info.ecver > 0x44) {
-		if (ec_byte & BAT_STAT_CHARGING)
+		if (ec_byte & (BAT_STAT_CHARGING | BAT_STAT_TRICKLE))
 			val->intval = POWER_SUPPLY_STATUS_CHARGING;
 		else if (ec_byte & BAT_STAT_DISCHARGING)
 			val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
@@ -219,7 +221,8 @@ static int olpc_bat_get_property(struct power_supply *psy,
 	   It doesn't matter though -- the EC will return the last-known
 	   information, and it's as if we just ran that _little_ bit faster
 	   and managed to read it out before the battery went away. */
-	if (!(ec_byte & BAT_STAT_PRESENT) && psp != POWER_SUPPLY_PROP_PRESENT)
+	if (!(ec_byte & (BAT_STAT_PRESENT | BAT_STAT_TRICKLE)) &&
+			psp != POWER_SUPPLY_PROP_PRESENT)
 		return -ENODEV;
 
 	switch (psp) {
@@ -229,7 +232,8 @@ static int olpc_bat_get_property(struct power_supply *psy,
 			return ret;
 		break;
 	case POWER_SUPPLY_PROP_PRESENT:
-		val->intval = !!(ec_byte & BAT_STAT_PRESENT);
+		val->intval = !!(ec_byte & (BAT_STAT_PRESENT |
+					    BAT_STAT_TRICKLE));
 		break;
 
 	case POWER_SUPPLY_PROP_HEALTH:
@@ -334,21 +338,21 @@ static ssize_t olpc_bat_eeprom_read(struct kobject *kobj,
 		struct bin_attribute *attr, char *buf, loff_t off, size_t count)
 {
 	uint8_t ec_byte;
-	int ret, end;
+	int ret;
+	int i;
 
 	if (off >= EEPROM_SIZE)
 		return 0;
 	if (off + count > EEPROM_SIZE)
 		count = EEPROM_SIZE - off;
 
-	end = EEPROM_START + off + count;
-	for (ec_byte = EEPROM_START + off; ec_byte < end; ec_byte++) {
-		ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1,
-				&buf[ec_byte - EEPROM_START], 1);
+	for (i = 0; i < count; i++) {
+		ec_byte = EEPROM_START + off + i;
+		ret = olpc_ec_cmd(EC_BAT_EEPROM, &ec_byte, 1, &buf[i], 1);
 		if (ret) {
-			printk(KERN_ERR "olpc-battery:  EC command "
-					"EC_BAT_EEPROM @ 0x%x failed -"
-					" %d!\n", ec_byte, ret);
+			pr_err("olpc-battery: "
+			       "EC_BAT_EEPROM cmd @ 0x%x failed - %d!\n",
+			       ec_byte, ret);
 			return -EIO;
 		}
 	}
diff --git a/drivers/rtc/rtc-cmos.c b/drivers/rtc/rtc-cmos.c
index 23e10b6..f7a4701 100644
--- a/drivers/rtc/rtc-cmos.c
+++ b/drivers/rtc/rtc-cmos.c
@@ -1174,23 +1174,34 @@ static struct platform_driver cmos_platform_driver = {
 	}
 };
 
+#ifdef CONFIG_PNP
+static bool pnp_driver_registered;
+#endif
+static bool platform_driver_registered;
+
 static int __init cmos_init(void)
 {
 	int retval = 0;
 
 #ifdef	CONFIG_PNP
-	pnp_register_driver(&cmos_pnp_driver);
+	retval = pnp_register_driver(&cmos_pnp_driver);
+	if (retval == 0)
+		pnp_driver_registered = true;
 #endif
 
-	if (!cmos_rtc.dev)
+	if (!cmos_rtc.dev) {
 		retval = platform_driver_probe(&cmos_platform_driver,
 					       cmos_platform_probe);
+		if (retval == 0)
+			platform_driver_registered = true;
+	}
 
 	if (retval == 0)
 		return 0;
 
 #ifdef	CONFIG_PNP
-	pnp_unregister_driver(&cmos_pnp_driver);
+	if (pnp_driver_registered)
+		pnp_unregister_driver(&cmos_pnp_driver);
 #endif
 	return retval;
 }
@@ -1199,9 +1210,11 @@ module_init(cmos_init);
 static void __exit cmos_exit(void)
 {
 #ifdef	CONFIG_PNP
-	pnp_unregister_driver(&cmos_pnp_driver);
+	if (pnp_driver_registered)
+		pnp_unregister_driver(&cmos_pnp_driver);
 #endif
-	platform_driver_unregister(&cmos_platform_driver);
+	if (platform_driver_registered)
+		platform_driver_unregister(&cmos_platform_driver);
 }
 module_exit(cmos_exit);
 
diff --git a/drivers/s390/crypto/ap_bus.c b/drivers/s390/crypto/ap_bus.c
index 727a809..ed3dcde 100644
--- a/drivers/s390/crypto/ap_bus.c
+++ b/drivers/s390/crypto/ap_bus.c
@@ -1145,12 +1145,17 @@ ap_config_timeout(unsigned long ptr)
  */
 static inline void ap_schedule_poll_timer(void)
 {
+	ktime_t hr_time;
 	if (ap_using_interrupts() || ap_suspend_flag)
 		return;
 	if (hrtimer_is_queued(&ap_poll_timer))
 		return;
-	hrtimer_start(&ap_poll_timer, ktime_set(0, poll_timeout),
-		      HRTIMER_MODE_ABS);
+	if (ktime_to_ns(hrtimer_expires_remaining(&ap_poll_timer)) <= 0) {
+		hr_time = ktime_set(0, poll_timeout);
+		hrtimer_forward_now(&ap_poll_timer, hr_time);
+		hrtimer_restart(&ap_poll_timer);
+	}
+	return;
 }
 
 /**
diff --git a/drivers/serial/atmel_serial.c b/drivers/serial/atmel_serial.c
index 338b15c..607d43a 100644
--- a/drivers/serial/atmel_serial.c
+++ b/drivers/serial/atmel_serial.c
@@ -1551,6 +1551,7 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev)
 	if (ret)
 		goto err_add_port;
 
+#ifdef CONFIG_SERIAL_ATMEL_CONSOLE
 	if (atmel_is_console_port(&port->uart)
 			&& ATMEL_CONSOLE_DEVICE->flags & CON_ENABLED) {
 		/*
@@ -1559,6 +1560,7 @@ static int __devinit atmel_serial_probe(struct platform_device *pdev)
 		 */
 		clk_disable(port->clk);
 	}
+#endif
 
 	device_init_wakeup(&pdev->dev, 1);
 	platform_set_drvdata(pdev, port);
diff --git a/drivers/serial/cpm_uart/cpm_uart_cpm2.c b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
index 141c0a3..a9802e7 100644
--- a/drivers/serial/cpm_uart/cpm_uart_cpm2.c
+++ b/drivers/serial/cpm_uart/cpm_uart_cpm2.c
@@ -132,7 +132,7 @@ int cpm_uart_allocbuf(struct uart_cpm_port *pinfo, unsigned int is_con)
 	memsz = L1_CACHE_ALIGN(pinfo->rx_nrfifos * pinfo->rx_fifosize) +
 	    L1_CACHE_ALIGN(pinfo->tx_nrfifos * pinfo->tx_fifosize);
 	if (is_con) {
-		mem_addr = alloc_bootmem(memsz);
+		mem_addr = kzalloc(memsz, GFP_NOWAIT);
 		dma_addr = virt_to_bus(mem_addr);
 	}
 	else
diff --git a/drivers/spi/omap2_mcspi.c b/drivers/spi/omap2_mcspi.c
index eee4b6e..9b80ad3 100644
--- a/drivers/spi/omap2_mcspi.c
+++ b/drivers/spi/omap2_mcspi.c
@@ -59,6 +59,8 @@
 
 /* per-register bitmasks: */
 
+#define OMAP2_MCSPI_SYSCONFIG_SMARTIDLE	(2 << 3)
+#define OMAP2_MCSPI_SYSCONFIG_ENAWAKEUP	(1 << 2)
 #define OMAP2_MCSPI_SYSCONFIG_AUTOIDLE	(1 << 0)
 #define OMAP2_MCSPI_SYSCONFIG_SOFTRESET	(1 << 1)
 
@@ -90,6 +92,7 @@
 
 #define OMAP2_MCSPI_CHCTRL_EN		(1 << 0)
 
+#define OMAP2_MCSPI_WAKEUPENABLE_WKEN	(1 << 0)
 
 /* We have 2 DMA channels per CS, one for RX and one for TX */
 struct omap2_mcspi_dma {
@@ -269,7 +272,7 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
 
 	if (rx != NULL) {
 		omap_set_dma_transfer_params(mcspi_dma->dma_rx_channel,
-				data_type, element_count, 1,
+				data_type, element_count - 1, 1,
 				OMAP_DMA_SYNC_ELEMENT,
 				mcspi_dma->dma_rx_sync_dev, 1);
 
@@ -300,6 +303,25 @@ omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
 	if (rx != NULL) {
 		wait_for_completion(&mcspi_dma->dma_rx_completion);
 		dma_unmap_single(NULL, xfer->rx_dma, count, DMA_FROM_DEVICE);
+		omap2_mcspi_set_enable(spi, 0);
+		if (likely(mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHSTAT0)
+				& OMAP2_MCSPI_CHSTAT_RXS)) {
+			u32 w;
+
+			w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0);
+			if (word_len <= 8)
+				((u8 *)xfer->rx_buf)[element_count - 1] = w;
+			else if (word_len <= 16)
+				((u16 *)xfer->rx_buf)[element_count - 1] = w;
+			else /* word_len <= 32 */
+				((u32 *)xfer->rx_buf)[element_count - 1] = w;
+		} else {
+			dev_err(&spi->dev, "DMA RX last word empty");
+			count -= (word_len <= 8)  ? 1 :
+				 (word_len <= 16) ? 2 :
+			       /* word_len <= 32 */ 4;
+		}
+		omap2_mcspi_set_enable(spi, 1);
 	}
 	return count;
 }
@@ -873,8 +895,12 @@ static int __init omap2_mcspi_reset(struct omap2_mcspi *mcspi)
 	} while (!(tmp & OMAP2_MCSPI_SYSSTATUS_RESETDONE));
 
 	mcspi_write_reg(master, OMAP2_MCSPI_SYSCONFIG,
-			/* (3 << 8) | (2 << 3) | */
-			OMAP2_MCSPI_SYSCONFIG_AUTOIDLE);
+			OMAP2_MCSPI_SYSCONFIG_AUTOIDLE |
+			OMAP2_MCSPI_SYSCONFIG_ENAWAKEUP |
+			OMAP2_MCSPI_SYSCONFIG_SMARTIDLE);
+
+	mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE,
+			OMAP2_MCSPI_WAKEUPENABLE_WKEN);
 
 	omap2_mcspi_set_master_mode(master);
 
diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig
index 348bf61..975ecdd 100644
--- a/drivers/staging/Kconfig
+++ b/drivers/staging/Kconfig
@@ -103,8 +103,6 @@ source "drivers/staging/pohmelfs/Kconfig"
 
 source "drivers/staging/stlc45xx/Kconfig"
 
-source "drivers/staging/uc2322/Kconfig"
-
 source "drivers/staging/b3dfg/Kconfig"
 
 source "drivers/staging/phison/Kconfig"
diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile
index 8d61d7b..2241ae1 100644
--- a/drivers/staging/Makefile
+++ b/drivers/staging/Makefile
@@ -34,7 +34,6 @@ obj-$(CONFIG_ANDROID)		+= android/
 obj-$(CONFIG_DST)		+= dst/
 obj-$(CONFIG_POHMELFS)		+= pohmelfs/
 obj-$(CONFIG_STLC45XX)		+= stlc45xx/
-obj-$(CONFIG_USB_SERIAL_ATEN2011)	+= uc2322/
 obj-$(CONFIG_B3DFG)		+= b3dfg/
 obj-$(CONFIG_IDE_PHISON)	+= phison/
 obj-$(CONFIG_PLAN9AUTH)		+= p9auth/
diff --git a/drivers/staging/android/lowmemorykiller.c b/drivers/staging/android/lowmemorykiller.c
index fe72240..f934393 100644
--- a/drivers/staging/android/lowmemorykiller.c
+++ b/drivers/staging/android/lowmemorykiller.c
@@ -96,19 +96,21 @@ static int lowmem_shrink(int nr_to_scan, gfp_t gfp_mask)
 
 	read_lock(&tasklist_lock);
 	for_each_process(p) {
+		struct mm_struct *mm;
 		int oom_adj;
 
 		task_lock(p);
-		if (!p->mm) {
+		mm = p->mm;
+		if (!mm) {
 			task_unlock(p);
 			continue;
 		}
-		oom_adj = p->oomkilladj;
+		oom_adj = mm->oom_adj;
 		if (oom_adj < min_adj) {
 			task_unlock(p);
 			continue;
 		}
-		tasksize = get_mm_rss(p->mm);
+		tasksize = get_mm_rss(mm);
 		task_unlock(p);
 		if (tasksize <= 0)
 			continue;
diff --git a/drivers/staging/serqt_usb2/serqt_usb2.c b/drivers/staging/serqt_usb2/serqt_usb2.c
index a9bd410..0fdf8c6 100644
--- a/drivers/staging/serqt_usb2/serqt_usb2.c
+++ b/drivers/staging/serqt_usb2/serqt_usb2.c
@@ -360,18 +360,18 @@ static void qt_read_bulk_callback(struct urb *urb)
 	if (port_paranoia_check(port, __func__) != 0) {
 		dbg("%s - port_paranoia_check, exiting\n", __func__);
 		qt_port->ReadBulkStopped = 1;
-		return;
+		goto exit;
 	}
 
 	if (!serial) {
 		dbg("%s - bad serial pointer, exiting\n", __func__);
-		return;
+		goto exit;
 	}
 	if (qt_port->closePending == 1) {
 		/* Were closing , stop reading */
 		dbg("%s - (qt_port->closepending == 1\n", __func__);
 		qt_port->ReadBulkStopped = 1;
-		return;
+		goto exit;
 	}
 
 	/*
@@ -381,7 +381,7 @@ static void qt_read_bulk_callback(struct urb *urb)
 	 */
 	if (qt_port->RxHolding == 1) {
 		qt_port->ReadBulkStopped = 1;
-		return;
+		goto exit;
 	}
 
 	if (urb->status) {
@@ -389,7 +389,7 @@ static void qt_read_bulk_callback(struct urb *urb)
 
 		dbg("%s - nonzero read bulk status received: %d\n",
 		    __func__, urb->status);
-		return;
+		goto exit;
 	}
 
 	if (tty && RxCount) {
@@ -463,6 +463,8 @@ static void qt_read_bulk_callback(struct urb *urb)
 	}
 
 	schedule_work(&port->work);
+exit:
+	tty_kref_put(tty);
 }
 
 /*
@@ -736,6 +738,11 @@ static int qt_startup(struct usb_serial *serial)
 		if (!qt_port) {
 			dbg("%s: kmalloc for quatech_port (%d) failed!.",
 			    __func__, i);
+			for(--i; i >= 0; i--) {
+				port = serial->port[i];
+				kfree(usb_get_serial_port_data(port));
+				usb_set_serial_port_data(port, NULL);
+			}
 			return -ENOMEM;
 		}
 		spin_lock_init(&qt_port->lock);
@@ -1041,7 +1048,7 @@ static void qt_block_until_empty(struct tty_struct *tty,
 	}
 }
 
-static void qt_close( struct usb_serial_port *port)
+static void qt_close(struct usb_serial_port *port)
 {
 	struct usb_serial *serial = port->serial;
 	struct quatech_port *qt_port;
@@ -1068,6 +1075,7 @@ static void qt_close( struct usb_serial_port *port)
 	/* wait up to for transmitter to empty */
 	if (serial->dev)
 		qt_block_until_empty(tty, qt_port);
+	tty_kref_put(tty);
 
 	/* Close uart channel */
 	status = qt_close_channel(serial, index);
diff --git a/drivers/staging/uc2322/Kconfig b/drivers/staging/uc2322/Kconfig
deleted file mode 100644
index 2e0c6e79..0000000
--- a/drivers/staging/uc2322/Kconfig
+++ /dev/null
@@ -1,10 +0,0 @@
-config USB_SERIAL_ATEN2011
-	tristate "ATEN 2011 USB to serial device support"
-	depends on USB_SERIAL
-	default N
-	---help---
-	  Say Y here if you want to use a ATEN 2011 dual port USB to serial
-	  adapter.
-
-	  To compile this driver as a module, choose M here: the module will be
-	  called aten2011.
diff --git a/drivers/staging/uc2322/Makefile b/drivers/staging/uc2322/Makefile
deleted file mode 100644
index 49c18d6..0000000
--- a/drivers/staging/uc2322/Makefile
+++ /dev/null
@@ -1 +0,0 @@
-obj-$(CONFIG_USB_SERIAL_ATEN2011)	+= aten2011.o
diff --git a/drivers/staging/uc2322/TODO b/drivers/staging/uc2322/TODO
deleted file mode 100644
index c189a64..0000000
--- a/drivers/staging/uc2322/TODO
+++ /dev/null
@@ -1,7 +0,0 @@
-TODO:
-	- checkpatch.pl cleanups
-	- remove dead and useless code (auditing the tty ioctls to
-	  verify that they really are correct and needed.)
-
-Please send any patches to Greg Kroah-Hartman <greg@kroah.com> and
-Russell Lang <gsview@ghostgum.com.au>.
diff --git a/drivers/staging/uc2322/aten2011.c b/drivers/staging/uc2322/aten2011.c
deleted file mode 100644
index 39d0926..0000000
--- a/drivers/staging/uc2322/aten2011.c
+++ /dev/null
@@ -1,2430 +0,0 @@
-/*
- * Aten 2011 USB serial driver for 4 port devices
- *
- * Copyright (C) 2000 Inside Out Networks
- * Copyright (C) 2001-2002, 2009 Greg Kroah-Hartman <greg@kroah.com>
- * Copyright (C) 2009 Novell Inc.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/tty.h>
-#include <linux/tty_driver.h>
-#include <linux/tty_flip.h>
-#include <linux/module.h>
-#include <linux/serial.h>
-#include <linux/uaccess.h>
-#include <linux/usb.h>
-#include <linux/usb/serial.h>
-
-
-#define ZLP_REG1		0x3A	/* Zero_Flag_Reg1 58 */
-#define ZLP_REG2		0x3B	/* Zero_Flag_Reg2 59 */
-#define ZLP_REG3		0x3C	/* Zero_Flag_Reg3 60 */
-#define ZLP_REG4		0x3D	/* Zero_Flag_Reg4 61 */
-#define ZLP_REG5		0x3E	/* Zero_Flag_Reg5 62 */
-
-/* Interrupt Rotinue Defines	*/
-#define SERIAL_IIR_RLS		0x06
-#define SERIAL_IIR_RDA		0x04
-#define SERIAL_IIR_CTI		0x0c
-#define SERIAL_IIR_THR		0x02
-#define SERIAL_IIR_MS		0x00
-
-/* Emulation of the bit mask on the LINE STATUS REGISTER.  */
-#define SERIAL_LSR_DR		0x0001
-#define SERIAL_LSR_OE		0x0002
-#define SERIAL_LSR_PE		0x0004
-#define SERIAL_LSR_FE		0x0008
-#define SERIAL_LSR_BI		0x0010
-#define SERIAL_LSR_THRE		0x0020
-#define SERIAL_LSR_TEMT		0x0040
-#define SERIAL_LSR_FIFOERR	0x0080
-
-/* MSR bit defines(place holders) */
-#define ATEN_MSR_DELTA_CTS	0x10
-#define ATEN_MSR_DELTA_DSR	0x20
-#define ATEN_MSR_DELTA_RI	0x40
-#define ATEN_MSR_DELTA_CD	0x80
-
-/* Serial Port register Address */
-#define RECEIVE_BUFFER_REGISTER		((__u16)(0x00))
-#define TRANSMIT_HOLDING_REGISTER	((__u16)(0x00))
-#define INTERRUPT_ENABLE_REGISTER	((__u16)(0x01))
-#define INTERRUPT_IDENT_REGISTER	((__u16)(0x02))
-#define FIFO_CONTROL_REGISTER		((__u16)(0x02))
-#define LINE_CONTROL_REGISTER		((__u16)(0x03))
-#define MODEM_CONTROL_REGISTER		((__u16)(0x04))
-#define LINE_STATUS_REGISTER		((__u16)(0x05))
-#define MODEM_STATUS_REGISTER		((__u16)(0x06))
-#define SCRATCH_PAD_REGISTER		((__u16)(0x07))
-#define DIVISOR_LATCH_LSB		((__u16)(0x00))
-#define DIVISOR_LATCH_MSB		((__u16)(0x01))
-
-#define SP1_REGISTER			((__u16)(0x00))
-#define CONTROL1_REGISTER		((__u16)(0x01))
-#define CLK_MULTI_REGISTER		((__u16)(0x02))
-#define CLK_START_VALUE_REGISTER	((__u16)(0x03))
-#define DCR1_REGISTER			((__u16)(0x04))
-#define GPIO_REGISTER			((__u16)(0x07))
-
-#define SERIAL_LCR_DLAB			((__u16)(0x0080))
-
-/*
- * URB POOL related defines
- */
-#define NUM_URBS			16	/* URB Count */
-#define URB_TRANSFER_BUFFER_SIZE	32	/* URB Size  */
-
-#define USB_VENDOR_ID_ATENINTL		0x0557
-#define ATENINTL_DEVICE_ID_2011		0x2011
-#define ATENINTL_DEVICE_ID_7820		0x7820
-
-static struct usb_device_id id_table[] = {
-	{ USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_2011) },
-	{ USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_7820) },
-	{ } /* terminating entry */
-};
-MODULE_DEVICE_TABLE(usb, id_table);
-
-/* This structure holds all of the local port information */
-struct ATENINTL_port {
-	int		port_num;          /*Actual port number in the device(1,2,etc)*/
-	__u8		bulk_out_endpoint;   	/* the bulk out endpoint handle */
-	unsigned char	*bulk_out_buffer;     	/* buffer used for the bulk out endpoint */
-	struct urb	*write_urb;	     	/* write URB for this port */
-	__u8		bulk_in_endpoint;	/* the bulk in endpoint handle */
-	unsigned char	*bulk_in_buffer;	/* the buffer we use for the bulk in endpoint */
-	struct urb	*read_urb;	     	/* read URB for this port */
-	__u8		shadowLCR;		/* last LCR value received */
-	__u8		shadowMCR;		/* last MCR value received */
-	char		open;
-	char		chaseResponsePending;
-	wait_queue_head_t	wait_chase;		/* for handling sleeping while waiting for chase to finish */
-	wait_queue_head_t	wait_command;		/* for handling sleeping while waiting for command to finish */
-	struct async_icount	icount;
-	struct usb_serial_port	*port;			/* loop back to the owner of this object */
-	/*Offsets*/
-	__u8		SpRegOffset;
-	__u8		ControlRegOffset;
-	__u8		DcrRegOffset;
-	/* for processing control URBS in interrupt context */
-	struct urb 	*control_urb;
-	char		*ctrl_buf;
-	int		MsrLsr;
-
-	struct urb	*write_urb_pool[NUM_URBS];
-	/* we pass a pointer to this as the arguement sent to cypress_set_termios old_termios */
-	struct ktermios	tmp_termios;        /* stores the old termios settings */
-	spinlock_t 	lock;                   /* private lock */
-};
-
-/* This structure holds all of the individual serial device information */
-struct ATENINTL_serial {
-	__u8		interrupt_in_endpoint;		/* the interrupt endpoint handle */
-	unsigned char	*interrupt_in_buffer;		/* the buffer we use for the interrupt endpoint */
-	struct urb	*interrupt_read_urb;	/* our interrupt urb */
-	__u8		bulk_in_endpoint;	/* the bulk in endpoint handle */
-	unsigned char	*bulk_in_buffer;		/* the buffer we use for the bulk in endpoint */
-	struct urb 	*read_urb;		/* our bulk read urb */
-	__u8		bulk_out_endpoint;	/* the bulk out endpoint handle */
-	struct usb_serial	*serial;	/* loop back to the owner of this object */
-	int	ATEN2011_spectrum_2or4ports; 	/* this says the number of ports in the device */
-	/* Indicates about the no.of opened ports of an individual USB-serial adapater. */
-	unsigned int	NoOfOpenPorts;
-	/* a flag for Status endpoint polling */
-	unsigned char	status_polling_started;
-};
-
-static void ATEN2011_set_termios(struct tty_struct *tty,
-				 struct usb_serial_port *port,
-				 struct ktermios *old_termios);
-static void ATEN2011_change_port_settings(struct tty_struct *tty,
-					  struct ATENINTL_port *ATEN2011_port,
-					  struct ktermios *old_termios);
-
-/*************************************
- * Bit definitions for each register *
- *************************************/
-#define LCR_BITS_5		0x00	/* 5 bits/char */
-#define LCR_BITS_6		0x01	/* 6 bits/char */
-#define LCR_BITS_7		0x02	/* 7 bits/char */
-#define LCR_BITS_8		0x03	/* 8 bits/char */
-#define LCR_BITS_MASK		0x03	/* Mask for bits/char field */
-
-#define LCR_STOP_1		0x00	/* 1 stop bit */
-#define LCR_STOP_1_5		0x04	/* 1.5 stop bits (if 5   bits/char) */
-#define LCR_STOP_2		0x04	/* 2 stop bits   (if 6-8 bits/char) */
-#define LCR_STOP_MASK		0x04	/* Mask for stop bits field */
-
-#define LCR_PAR_NONE		0x00	/* No parity */
-#define LCR_PAR_ODD		0x08	/* Odd parity */
-#define LCR_PAR_EVEN		0x18	/* Even parity */
-#define LCR_PAR_MARK		0x28	/* Force parity bit to 1 */
-#define LCR_PAR_SPACE		0x38	/* Force parity bit to 0 */
-#define LCR_PAR_MASK		0x38	/* Mask for parity field */
-
-#define LCR_SET_BREAK		0x40	/* Set Break condition */
-#define LCR_DL_ENABLE		0x80	/* Enable access to divisor latch */
-
-#define MCR_DTR			0x01	/* Assert DTR */
-#define MCR_RTS			0x02	/* Assert RTS */
-#define MCR_OUT1		0x04	/* Loopback only: Sets state of RI */
-#define MCR_MASTER_IE		0x08	/* Enable interrupt outputs */
-#define MCR_LOOPBACK		0x10	/* Set internal (digital) loopback mode */
-#define MCR_XON_ANY		0x20	/* Enable any char to exit XOFF mode */
-
-#define ATEN2011_MSR_CTS	0x10	/* Current state of CTS */
-#define ATEN2011_MSR_DSR	0x20	/* Current state of DSR */
-#define ATEN2011_MSR_RI		0x40	/* Current state of RI */
-#define ATEN2011_MSR_CD		0x80	/* Current state of CD */
-
-
-static int debug;
-
-/*
- * Version Information
- */
-#define DRIVER_VERSION "2.0"
-#define DRIVER_DESC "ATENINTL 2011 USB Serial Adapter"
-
-/*
- * Defines used for sending commands to port
- */
-
-#define ATEN_WDR_TIMEOUT	(50)	/* default urb timeout */
-
-/* Requests */
-#define ATEN_RD_RTYPE		0xC0
-#define ATEN_WR_RTYPE		0x40
-#define ATEN_RDREQ		0x0D
-#define ATEN_WRREQ		0x0E
-#define ATEN_CTRL_TIMEOUT	500
-#define VENDOR_READ_LENGTH	(0x01)
-
-/* set to 1 for RS485 mode and 0 for RS232 mode */
-/* FIXME make this somehow dynamic and not build time specific */
-static int RS485mode;
-
-static int set_reg_sync(struct usb_serial_port *port, __u16 reg, __u16 val)
-{
-	struct usb_device *dev = port->serial->dev;
-	val = val & 0x00ff;
-
-	dbg("%s: is %x, value %x", __func__, reg, val);
-
-	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), ATEN_WRREQ,
-			       ATEN_WR_RTYPE, val, reg, NULL, 0,
-			       ATEN_WDR_TIMEOUT);
-}
-
-static int get_reg_sync(struct usb_serial_port *port, __u16 reg, __u16 *val)
-{
-	struct usb_device *dev = port->serial->dev;
-	int ret;
-
-	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), ATEN_RDREQ,
-			      ATEN_RD_RTYPE, 0, reg, val, VENDOR_READ_LENGTH,
-			      ATEN_WDR_TIMEOUT);
-	dbg("%s: offset is %x, return val %x", __func__, reg, *val);
-	*val = (*val) & 0x00ff;
-	return ret;
-}
-
-static int set_uart_reg(struct usb_serial_port *port, __u16 reg, __u16 val)
-{
-	struct usb_device *dev = port->serial->dev;
-	struct ATENINTL_serial *a_serial;
-	__u16 minor;
-
-	a_serial = usb_get_serial_data(port->serial);
-	minor = port->serial->minor;
-	if (minor == SERIAL_TTY_NO_MINOR)
-		minor = 0;
-	val = val & 0x00ff;
-
-	/*
-	 * For the UART control registers,
-	 * the application number need to be Or'ed
-	 */
-	if (a_serial->ATEN2011_spectrum_2or4ports == 4)
-		val |= (((__u16)port->number - minor) + 1) << 8;
-	else {
-		if (((__u16) port->number - minor) == 0)
-			val |= (((__u16)port->number - minor) + 1) << 8;
-		else
-			val |= (((__u16)port->number - minor) + 2) << 8;
-	}
-	dbg("%s: application number is %x", __func__, val);
-
-	return usb_control_msg(dev, usb_sndctrlpipe(dev, 0), ATEN_WRREQ,
-			       ATEN_WR_RTYPE, val, reg, NULL, 0,
-			       ATEN_WDR_TIMEOUT);
-}
-
-static int get_uart_reg(struct usb_serial_port *port, __u16 reg, __u16 *val)
-{
-	struct usb_device *dev = port->serial->dev;
-	int ret = 0;
-	__u16 wval;
-	struct ATENINTL_serial *a_serial;
-	__u16 minor = port->serial->minor;
-
-	a_serial = usb_get_serial_data(port->serial);
-	if (minor == SERIAL_TTY_NO_MINOR)
-		minor = 0;
-
-	/* wval is same as application number */
-	if (a_serial->ATEN2011_spectrum_2or4ports == 4)
-		wval = (((__u16)port->number - minor) + 1) << 8;
-	else {
-		if (((__u16) port->number - minor) == 0)
-			wval = (((__u16) port->number - minor) + 1) << 8;
-		else
-			wval = (((__u16) port->number - minor) + 2) << 8;
-	}
-	dbg("%s: application number is %x", __func__, wval);
-	ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), ATEN_RDREQ,
-			      ATEN_RD_RTYPE, wval, reg, val, VENDOR_READ_LENGTH,
-			      ATEN_WDR_TIMEOUT);
-	*val = (*val) & 0x00ff;
-	return ret;
-}
-
-static int handle_newMsr(struct ATENINTL_port *port, __u8 newMsr)
-{
-	struct ATENINTL_port *ATEN2011_port;
-	struct async_icount *icount;
-	ATEN2011_port = port;
-	icount = &ATEN2011_port->icount;
-	if (newMsr &
-	    (ATEN_MSR_DELTA_CTS | ATEN_MSR_DELTA_DSR | ATEN_MSR_DELTA_RI |
-	     ATEN_MSR_DELTA_CD)) {
-		icount = &ATEN2011_port->icount;
-
-		/* update input line counters */
-		if (newMsr & ATEN_MSR_DELTA_CTS)
-			icount->cts++;
-		if (newMsr & ATEN_MSR_DELTA_DSR)
-			icount->dsr++;
-		if (newMsr & ATEN_MSR_DELTA_CD)
-			icount->dcd++;
-		if (newMsr & ATEN_MSR_DELTA_RI)
-			icount->rng++;
-	}
-
-	return 0;
-}
-
-static int handle_newLsr(struct ATENINTL_port *port, __u8 newLsr)
-{
-	struct async_icount *icount;
-
-	dbg("%s - %02x", __func__, newLsr);
-
-	if (newLsr & SERIAL_LSR_BI) {
-		/*
-		 * Parity and Framing errors only count if they occur exclusive
-		 * of a break being received.
-		 */
-		newLsr &= (__u8) (SERIAL_LSR_OE | SERIAL_LSR_BI);
-	}
-
-	/* update input line counters */
-	icount = &port->icount;
-	if (newLsr & SERIAL_LSR_BI)
-		icount->brk++;
-	if (newLsr & SERIAL_LSR_OE)
-		icount->overrun++;
-	if (newLsr & SERIAL_LSR_PE)
-		icount->parity++;
-	if (newLsr & SERIAL_LSR_FE)
-		icount->frame++;
-
-	return 0;
-}
-
-static void ATEN2011_control_callback(struct urb *urb)
-{
-	unsigned char *data;
-	struct ATENINTL_port *ATEN2011_port;
-	__u8 regval = 0x0;
-
-	switch (urb->status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__,
-		    urb->status);
-		return;
-	default:
-		dbg("%s - nonzero urb status received: %d", __func__,
-		    urb->status);
-		goto exit;
-	}
-
-	ATEN2011_port = (struct ATENINTL_port *)urb->context;
-
-	dbg("%s urb buffer size is %d", __func__, urb->actual_length);
-	dbg("%s ATEN2011_port->MsrLsr is %d port %d", __func__,
-		ATEN2011_port->MsrLsr, ATEN2011_port->port_num);
-	data = urb->transfer_buffer;
-	regval = (__u8) data[0];
-	dbg("%s data is %x", __func__, regval);
-	if (ATEN2011_port->MsrLsr == 0)
-		handle_newMsr(ATEN2011_port, regval);
-	else if (ATEN2011_port->MsrLsr == 1)
-		handle_newLsr(ATEN2011_port, regval);
-
-exit:
-	return;
-}
-
-static int ATEN2011_get_reg(struct ATENINTL_port *ATEN, __u16 Wval, __u16 reg,
-			    __u16 *val)
-{
-	struct usb_device *dev = ATEN->port->serial->dev;
-	struct usb_ctrlrequest *dr = NULL;
-	unsigned char *buffer = NULL;
-	int ret = 0;
-	buffer = (__u8 *) ATEN->ctrl_buf;
-
-	dr = (void *)(buffer + 2);
-	dr->bRequestType = ATEN_RD_RTYPE;
-	dr->bRequest = ATEN_RDREQ;
-	dr->wValue = cpu_to_le16(Wval);
-	dr->wIndex = cpu_to_le16(reg);
-	dr->wLength = cpu_to_le16(2);
-
-	usb_fill_control_urb(ATEN->control_urb, dev, usb_rcvctrlpipe(dev, 0),
-			     (unsigned char *)dr, buffer, 2,
-			     ATEN2011_control_callback, ATEN);
-	ATEN->control_urb->transfer_buffer_length = 2;
-	ret = usb_submit_urb(ATEN->control_urb, GFP_ATOMIC);
-	return ret;
-}
-
-static void ATEN2011_interrupt_callback(struct urb *urb)
-{
-	int result;
-	int length;
-	struct ATENINTL_port *ATEN2011_port;
-	struct ATENINTL_serial *ATEN2011_serial;
-	struct usb_serial *serial;
-	__u16 Data;
-	unsigned char *data;
-	__u8 sp[5], st;
-	int i;
-	__u16 wval;
-	int minor;
-
-	dbg("%s", " : Entering");
-
-	ATEN2011_serial = (struct ATENINTL_serial *)urb->context;
-
-	switch (urb->status) {
-	case 0:
-		/* success */
-		break;
-	case -ECONNRESET:
-	case -ENOENT:
-	case -ESHUTDOWN:
-		/* this urb is terminated, clean up */
-		dbg("%s - urb shutting down with status: %d", __func__,
-		    urb->status);
-		return;
-	default:
-		dbg("%s - nonzero urb status received: %d", __func__,
-		    urb->status);
-		goto exit;
-	}
-	length = urb->actual_length;
-	data = urb->transfer_buffer;
-
-	serial = ATEN2011_serial->serial;
-
-	/* ATENINTL get 5 bytes
-	 * Byte 1 IIR Port 1 (port.number is 0)
-	 * Byte 2 IIR Port 2 (port.number is 1)
-	 * Byte 3 IIR Port 3 (port.number is 2)
-	 * Byte 4 IIR Port 4 (port.number is 3)
-	 * Byte 5 FIFO status for both */
-
-	if (length && length > 5) {
-		dbg("%s", "Wrong data !!!");
-		return;
-	}
-
-	/* MATRIX */
-	if (ATEN2011_serial->ATEN2011_spectrum_2or4ports == 4) {
-		sp[0] = (__u8) data[0];
-		sp[1] = (__u8) data[1];
-		sp[2] = (__u8) data[2];
-		sp[3] = (__u8) data[3];
-		st = (__u8) data[4];
-	} else {
-		sp[0] = (__u8) data[0];
-		sp[1] = (__u8) data[2];
-		/* sp[2]=(__u8)data[2]; */
-		/* sp[3]=(__u8)data[3]; */
-		st = (__u8) data[4];
-
-	}
-	for (i = 0; i < serial->num_ports; i++) {
-		ATEN2011_port = usb_get_serial_port_data(serial->port[i]);
-		minor = serial->minor;
-		if (minor == SERIAL_TTY_NO_MINOR)
-			minor = 0;
-		if ((ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2)
-		    && (i != 0))
-			wval =
-			    (((__u16) serial->port[i]->number -
-			      (__u16) (minor)) + 2) << 8;
-		else
-			wval =
-			    (((__u16) serial->port[i]->number -
-			      (__u16) (minor)) + 1) << 8;
-		if (ATEN2011_port->open != 0) {
-			if (sp[i] & 0x01) {
-				dbg("SP%d No Interrupt !!!", i);
-			} else {
-				switch (sp[i] & 0x0f) {
-				case SERIAL_IIR_RLS:
-					dbg("Serial Port %d: Receiver status error or address bit detected in 9-bit mode", i);
-					ATEN2011_port->MsrLsr = 1;
-					ATEN2011_get_reg(ATEN2011_port, wval,
-							 LINE_STATUS_REGISTER,
-							 &Data);
-					break;
-				case SERIAL_IIR_MS:
-					dbg("Serial Port %d: Modem status change", i);
-					ATEN2011_port->MsrLsr = 0;
-					ATEN2011_get_reg(ATEN2011_port, wval,
-							 MODEM_STATUS_REGISTER,
-							 &Data);
-					break;
-				}
-			}
-		}
-
-	}
-exit:
-	if (ATEN2011_serial->status_polling_started == 0)
-		return;
-
-	result = usb_submit_urb(urb, GFP_ATOMIC);
-	if (result) {
-		dev_err(&urb->dev->dev,
-			"%s - Error %d submitting interrupt urb\n",
-			__func__, result);
-	}
-
-	return;
-}
-
-static void ATEN2011_bulk_in_callback(struct urb *urb)
-{
-	int status;
-	unsigned char *data;
-	struct usb_serial *serial;
-	struct usb_serial_port *port;
-	struct ATENINTL_serial *ATEN2011_serial;
-	struct ATENINTL_port *ATEN2011_port;
-	struct tty_struct *tty;
-
-	if (urb->status) {
-		dbg("nonzero read bulk status received: %d", urb->status);
-		return;
-	}
-
-	ATEN2011_port = (struct ATENINTL_port *)urb->context;
-
-	port = (struct usb_serial_port *)ATEN2011_port->port;
-	serial = port->serial;
-
-	dbg("%s", "Entering...");
-
-	data = urb->transfer_buffer;
-	ATEN2011_serial = usb_get_serial_data(serial);
-
-	if (urb->actual_length) {
-		tty = tty_port_tty_get(&ATEN2011_port->port->port);
-		if (tty) {
-			tty_buffer_request_room(tty, urb->actual_length);
-			tty_insert_flip_string(tty, data, urb->actual_length);
-			tty_flip_buffer_push(tty);
-			tty_kref_put(tty);
-		}
-
-		ATEN2011_port->icount.rx += urb->actual_length;
-		dbg("ATEN2011_port->icount.rx is %d:",
-			ATEN2011_port->icount.rx);
-	}
-
-	if (!ATEN2011_port->read_urb) {
-		dbg("%s", "URB KILLED !!!");
-		return;
-	}
-
-	if (ATEN2011_port->read_urb->status != -EINPROGRESS) {
-		ATEN2011_port->read_urb->dev = serial->dev;
-
-		status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC);
-		if (status)
-			dbg("usb_submit_urb(read bulk) failed, status = %d", status);
-	}
-}
-
-static void ATEN2011_bulk_out_data_callback(struct urb *urb)
-{
-	struct ATENINTL_port *ATEN2011_port;
-	struct tty_struct *tty;
-
-	if (urb->status) {
-		dbg("nonzero write bulk status received:%d", urb->status);
-		return;
-	}
-
-	ATEN2011_port = (struct ATENINTL_port *)urb->context;
-
-	dbg("%s", "Entering .........");
-
-	tty = tty_port_tty_get(&ATEN2011_port->port->port);
-
-	if (tty && ATEN2011_port->open)
-		/* tell the tty driver that something has changed */
-		tty_wakeup(tty);
-
-	/* schedule_work(&ATEN2011_port->port->work); */
-	tty_kref_put(tty);
-
-}
-
-#ifdef ATENSerialProbe
-static int ATEN2011_serial_probe(struct usb_serial *serial,
-				 const struct usb_device_id *id)
-{
-
-	/*need to implement the mode_reg reading and updating\
-	   structures usb_serial_ device_type\
-	   (i.e num_ports, num_bulkin,bulkout etc) */
-	/* Also we can update the changes  attach */
-	return 1;
-}
-#endif
-
-static int ATEN2011_open(struct tty_struct *tty, struct usb_serial_port *port,
-			 struct file *filp)
-{
-	int response;
-	int j;
-	struct usb_serial *serial;
-	struct urb *urb;
-	__u16 Data;
-	int status;
-	struct ATENINTL_serial *ATEN2011_serial;
-	struct ATENINTL_port *ATEN2011_port;
-	struct ktermios tmp_termios;
-	int minor;
-
-	serial = port->serial;
-
-	ATEN2011_port = usb_get_serial_port_data(port);
-
-	if (ATEN2011_port == NULL)
-		return -ENODEV;
-
-	ATEN2011_serial = usb_get_serial_data(serial);
-	if (ATEN2011_serial == NULL)
-		return -ENODEV;
-
-	/* increment the number of opened ports counter here */
-	ATEN2011_serial->NoOfOpenPorts++;
-
-	usb_clear_halt(serial->dev, port->write_urb->pipe);
-	usb_clear_halt(serial->dev, port->read_urb->pipe);
-
-	/* Initialising the write urb pool */
-	for (j = 0; j < NUM_URBS; ++j) {
-		urb = usb_alloc_urb(0, GFP_ATOMIC);
-		ATEN2011_port->write_urb_pool[j] = urb;
-
-		if (urb == NULL) {
-			err("No more urbs???");
-			continue;
-		}
-
-		urb->transfer_buffer = NULL;
-		urb->transfer_buffer =
-		    kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
-		if (!urb->transfer_buffer) {
-			err("%s-out of memory for urb buffers.", __func__);
-			continue;
-		}
-	}
-
-/*****************************************************************************
- * Initialize ATEN2011 -- Write Init values to corresponding Registers
- *
- * Register Index
- * 1 : IER
- * 2 : FCR
- * 3 : LCR
- * 4 : MCR
- *
- * 0x08 : SP1/2 Control Reg
- *****************************************************************************/
-
-/* NEED to check the fallowing Block */
-
-	Data = 0x0;
-	status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data);
-	if (status < 0) {
-		dbg("Reading Spreg failed");
-		return -1;
-	}
-	Data |= 0x80;
-	status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
-	if (status < 0) {
-		dbg("writing Spreg failed");
-		return -1;
-	}
-
-	Data &= ~0x80;
-	status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
-	if (status < 0) {
-		dbg("writing Spreg failed");
-		return -1;
-	}
-
-/* End of block to be checked */
-/**************************CHECK***************************/
-
-	if (RS485mode == 0)
-		Data = 0xC0;
-	else
-		Data = 0x00;
-	status = set_uart_reg(port, SCRATCH_PAD_REGISTER, Data);
-	if (status < 0) {
-		dbg("Writing SCRATCH_PAD_REGISTER failed status-0x%x", status);
-		return -1;
-	} else
-		dbg("SCRATCH_PAD_REGISTER Writing success status%d", status);
-
-/**************************CHECK***************************/
-
-	Data = 0x0;
-	status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data);
-	if (status < 0) {
-		dbg("Reading Controlreg failed");
-		return -1;
-	}
-	Data |= 0x08;		/* Driver done bit */
-	Data |= 0x20;		/* rx_disable */
-	status = 0;
-	status =
-	    set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
-	if (status < 0) {
-		dbg("writing Controlreg failed");
-		return -1;
-	}
-	/*
-	 * do register settings here
-	 * Set all regs to the device default values.
-	 * First Disable all interrupts.
-	 */
-
-	Data = 0x00;
-	status = set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-	if (status < 0) {
-		dbg("disableing interrupts failed");
-		return -1;
-	}
-	/* Set FIFO_CONTROL_REGISTER to the default value */
-	Data = 0x00;
-	status = set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
-	if (status < 0) {
-		dbg("Writing FIFO_CONTROL_REGISTER  failed");
-		return -1;
-	}
-
-	Data = 0xcf;		/* chk */
-	status = set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
-	if (status < 0) {
-		dbg("Writing FIFO_CONTROL_REGISTER  failed");
-		return -1;
-	}
-
-	Data = 0x03;		/* LCR_BITS_8 */
-	status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-	ATEN2011_port->shadowLCR = Data;
-
-	Data = 0x0b;		/* MCR_DTR|MCR_RTS|MCR_MASTER_IE */
-	status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-	ATEN2011_port->shadowMCR = Data;
-
-#ifdef Check
-	Data = 0x00;
-	status = get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
-	ATEN2011_port->shadowLCR = Data;
-
-	Data |= SERIAL_LCR_DLAB;	/* data latch enable in LCR 0x80 */
-	status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-
-	Data = 0x0c;
-	status = set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
-
-	Data = 0x0;
-	status = set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
-
-	Data = 0x00;
-	status = get_uart_reg(port, LINE_CONTROL_REGISTER, &Data);
-
-/*      Data = ATEN2011_port->shadowLCR; */	/* data latch disable */
-	Data = Data & ~SERIAL_LCR_DLAB;
-	status = set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-	ATEN2011_port->shadowLCR = Data;
-#endif
-	/* clearing Bulkin and Bulkout Fifo */
-	Data = 0x0;
-	status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data);
-
-	Data = Data | 0x0c;
-	status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
-
-	Data = Data & ~0x0c;
-	status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
-	/* Finally enable all interrupts */
-	Data = 0x0;
-	Data = 0x0c;
-	status = set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-
-	/* clearing rx_disable */
-	Data = 0x0;
-	status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data);
-	Data = Data & ~0x20;
-	status = set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
-
-	/* rx_negate */
-	Data = 0x0;
-	status = get_reg_sync(port, ATEN2011_port->ControlRegOffset, &Data);
-	Data = Data | 0x10;
-	status = 0;
-	status = set_reg_sync(port, ATEN2011_port->ControlRegOffset, Data);
-
-	/*
-	 * Check to see if we've set up our endpoint info yet
-	 * (can't set it up in ATEN2011_startup as the structures
-	 * were not set up at that time.)
-	 */
-	if (ATEN2011_serial->NoOfOpenPorts == 1) {
-		/* start the status polling here */
-		ATEN2011_serial->status_polling_started = 1;
-		/* If not yet set, Set here */
-		ATEN2011_serial->interrupt_in_buffer =
-		    serial->port[0]->interrupt_in_buffer;
-		ATEN2011_serial->interrupt_in_endpoint =
-		    serial->port[0]->interrupt_in_endpointAddress;
-		ATEN2011_serial->interrupt_read_urb =
-		    serial->port[0]->interrupt_in_urb;
-
-		/* set up interrupt urb */
-		usb_fill_int_urb(ATEN2011_serial->interrupt_read_urb,
-				 serial->dev,
-				 usb_rcvintpipe(serial->dev,
-						ATEN2011_serial->
-						interrupt_in_endpoint),
-				 ATEN2011_serial->interrupt_in_buffer,
-				 ATEN2011_serial->interrupt_read_urb->
-				 transfer_buffer_length,
-				 ATEN2011_interrupt_callback, ATEN2011_serial,
-				 ATEN2011_serial->interrupt_read_urb->interval);
-
-		/* start interrupt read for ATEN2011               *
-		 * will continue as long as ATEN2011 is connected  */
-
-		response =
-		    usb_submit_urb(ATEN2011_serial->interrupt_read_urb,
-				   GFP_KERNEL);
-		if (response) {
-			dbg("%s - Error %d submitting interrupt urb",
-				__func__, response);
-		}
-
-	}
-
-	/*
-	 * See if we've set up our endpoint info yet
-	 * (can't set it up in ATEN2011_startup as the
-	 * structures were not set up at that time.)
-	 */
-
-	dbg("port number is %d", port->number);
-	dbg("serial number is %d", port->serial->minor);
-	dbg("Bulkin endpoint is %d", port->bulk_in_endpointAddress);
-	dbg("BulkOut endpoint is %d", port->bulk_out_endpointAddress);
-	dbg("Interrupt endpoint is %d",
-		port->interrupt_in_endpointAddress);
-	dbg("port's number in the device is %d", ATEN2011_port->port_num);
-	ATEN2011_port->bulk_in_buffer = port->bulk_in_buffer;
-	ATEN2011_port->bulk_in_endpoint = port->bulk_in_endpointAddress;
-	ATEN2011_port->read_urb = port->read_urb;
-	ATEN2011_port->bulk_out_endpoint = port->bulk_out_endpointAddress;
-
-	minor = port->serial->minor;
-	if (minor == SERIAL_TTY_NO_MINOR)
-		minor = 0;
-
-	/* set up our bulk in urb */
-	if ((ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2)
-	    && (((__u16) port->number - (__u16) (minor)) != 0)) {
-		usb_fill_bulk_urb(ATEN2011_port->read_urb, serial->dev,
-				  usb_rcvbulkpipe(serial->dev,
-						  (port->
-						   bulk_in_endpointAddress +
-						   2)), port->bulk_in_buffer,
-				  ATEN2011_port->read_urb->
-				  transfer_buffer_length,
-				  ATEN2011_bulk_in_callback, ATEN2011_port);
-	} else
-		usb_fill_bulk_urb(ATEN2011_port->read_urb,
-				  serial->dev,
-				  usb_rcvbulkpipe(serial->dev,
-						  port->
-						  bulk_in_endpointAddress),
-				  port->bulk_in_buffer,
-				  ATEN2011_port->read_urb->
-				  transfer_buffer_length,
-				  ATEN2011_bulk_in_callback, ATEN2011_port);
-
-	dbg("ATEN2011_open: bulkin endpoint is %d",
-		port->bulk_in_endpointAddress);
-	response = usb_submit_urb(ATEN2011_port->read_urb, GFP_KERNEL);
-	if (response) {
-		err("%s - Error %d submitting control urb", __func__,
-		    response);
-	}
-
-	/* initialize our wait queues */
-	init_waitqueue_head(&ATEN2011_port->wait_chase);
-	init_waitqueue_head(&ATEN2011_port->wait_command);
-
-	/* initialize our icount structure */
-	memset(&(ATEN2011_port->icount), 0x00, sizeof(ATEN2011_port->icount));
-
-	/* initialize our port settings */
-	ATEN2011_port->shadowMCR = MCR_MASTER_IE;	/* Must set to enable ints! */
-	ATEN2011_port->chaseResponsePending = 0;
-	/* send a open port command */
-	ATEN2011_port->open = 1;
-	/* ATEN2011_change_port_settings(ATEN2011_port,old_termios); */
-	/* Setup termios */
-	ATEN2011_set_termios(tty, port, &tmp_termios);
-	ATEN2011_port->icount.tx = 0;
-	ATEN2011_port->icount.rx = 0;
-
-	dbg("usb_serial serial:%x       ATEN2011_port:%x\nATEN2011_serial:%x      usb_serial_port port:%x",
-	     (unsigned int)serial, (unsigned int)ATEN2011_port,
-	     (unsigned int)ATEN2011_serial, (unsigned int)port);
-
-	return 0;
-
-}
-
-static int ATEN2011_chars_in_buffer(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	int i;
-	int chars = 0;
-	struct ATENINTL_port *ATEN2011_port;
-
-	/* dbg("%s"," ATEN2011_chars_in_buffer:entering ..........."); */
-
-	ATEN2011_port = usb_get_serial_port_data(port);
-	if (ATEN2011_port == NULL) {
-		dbg("%s", "ATEN2011_break:leaving ...........");
-		return -1;
-	}
-
-	for (i = 0; i < NUM_URBS; ++i)
-		if (ATEN2011_port->write_urb_pool[i]->status == -EINPROGRESS)
-			chars += URB_TRANSFER_BUFFER_SIZE;
-
-	dbg("%s - returns %d", __func__, chars);
-	return chars;
-
-}
-
-static void ATEN2011_block_until_tx_empty(struct tty_struct *tty,
-					  struct ATENINTL_port *ATEN2011_port)
-{
-	int timeout = HZ / 10;
-	int wait = 30;
-	int count;
-
-	while (1) {
-		count = ATEN2011_chars_in_buffer(tty);
-
-		/* Check for Buffer status */
-		if (count <= 0)
-			return;
-
-		/* Block the thread for a while */
-		interruptible_sleep_on_timeout(&ATEN2011_port->wait_chase,
-					       timeout);
-
-		/* No activity.. count down section */
-		wait--;
-		if (wait == 0) {
-			dbg("%s - TIMEOUT", __func__);
-			return;
-		} else {
-			/* Reset timout value back to seconds */
-			wait = 30;
-		}
-	}
-}
-
-static void ATEN2011_close(struct tty_struct *tty, struct usb_serial_port *port,
-			   struct file *filp)
-{
-	struct usb_serial *serial;
-	struct ATENINTL_serial *ATEN2011_serial;
-	struct ATENINTL_port *ATEN2011_port;
-	int no_urbs;
-	__u16 Data;
-
-	dbg("%s", "ATEN2011_close:entering...");
-	serial = port->serial;
-
-	/* take the Adpater and port's private data */
-	ATEN2011_serial = usb_get_serial_data(serial);
-	ATEN2011_port = usb_get_serial_port_data(port);
-	if ((ATEN2011_serial == NULL) || (ATEN2011_port == NULL))
-		return;
-
-	if (serial->dev) {
-		/* flush and block(wait) until tx is empty */
-		ATEN2011_block_until_tx_empty(tty, ATEN2011_port);
-	}
-	/* kill the ports URB's */
-	for (no_urbs = 0; no_urbs < NUM_URBS; no_urbs++)
-		usb_kill_urb(ATEN2011_port->write_urb_pool[no_urbs]);
-	/* Freeing Write URBs */
-	for (no_urbs = 0; no_urbs < NUM_URBS; ++no_urbs) {
-		kfree(ATEN2011_port->write_urb_pool[no_urbs]->transfer_buffer);
-		usb_free_urb(ATEN2011_port->write_urb_pool[no_urbs]);
-	}
-	/* While closing port, shutdown all bulk read, write  *
-	 * and interrupt read if they exists                  */
-	if (serial->dev) {
-		if (ATEN2011_port->write_urb) {
-			dbg("%s", "Shutdown bulk write");
-			usb_kill_urb(ATEN2011_port->write_urb);
-		}
-		if (ATEN2011_port->read_urb) {
-			dbg("%s", "Shutdown bulk read");
-			usb_kill_urb(ATEN2011_port->read_urb);
-		}
-		if ((&ATEN2011_port->control_urb)) {
-			dbg("%s", "Shutdown control read");
-			/* usb_kill_urb (ATEN2011_port->control_urb); */
-
-		}
-	}
-	/* if(ATEN2011_port->ctrl_buf != NULL) */
-		/* kfree(ATEN2011_port->ctrl_buf); */
-	/* decrement the no.of open ports counter of an individual USB-serial adapter. */
-	ATEN2011_serial->NoOfOpenPorts--;
-	dbg("NoOfOpenPorts in close%d:in port%d",
-		ATEN2011_serial->NoOfOpenPorts, port->number);
-	if (ATEN2011_serial->NoOfOpenPorts == 0) {
-		/* stop the stus polling here */
-		ATEN2011_serial->status_polling_started = 0;
-		if (ATEN2011_serial->interrupt_read_urb) {
-			dbg("%s", "Shutdown interrupt_read_urb");
-			/* ATEN2011_serial->interrupt_in_buffer=NULL; */
-			/* usb_kill_urb (ATEN2011_serial->interrupt_read_urb); */
-		}
-	}
-	if (ATEN2011_port->write_urb) {
-		/* if this urb had a transfer buffer already (old tx) free it */
-		kfree(ATEN2011_port->write_urb->transfer_buffer);
-		usb_free_urb(ATEN2011_port->write_urb);
-	}
-
-	/* clear the MCR & IER */
-	Data = 0x00;
-	set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-	Data = 0x00;
-	set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-
-	ATEN2011_port->open = 0;
-	dbg("%s", "Leaving ............");
-
-}
-
-static void ATEN2011_block_until_chase_response(struct tty_struct *tty,
-						struct ATENINTL_port
-						*ATEN2011_port)
-{
-	int timeout = 1 * HZ;
-	int wait = 10;
-	int count;
-
-	while (1) {
-		count = ATEN2011_chars_in_buffer(tty);
-
-		/* Check for Buffer status */
-		if (count <= 0) {
-			ATEN2011_port->chaseResponsePending = 0;
-			return;
-		}
-
-		/* Block the thread for a while */
-		interruptible_sleep_on_timeout(&ATEN2011_port->wait_chase,
-					       timeout);
-		/* No activity.. count down section */
-		wait--;
-		if (wait == 0) {
-			dbg("%s - TIMEOUT", __func__);
-			return;
-		} else {
-			/* Reset timout value back to seconds */
-			wait = 10;
-		}
-	}
-
-}
-
-static void ATEN2011_break(struct tty_struct *tty, int break_state)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	unsigned char data;
-	struct usb_serial *serial;
-	struct ATENINTL_serial *ATEN2011_serial;
-	struct ATENINTL_port *ATEN2011_port;
-
-	dbg("%s", "Entering ...........");
-	dbg("ATEN2011_break: Start");
-
-	serial = port->serial;
-
-	ATEN2011_serial = usb_get_serial_data(serial);
-	ATEN2011_port = usb_get_serial_port_data(port);
-
-	if ((ATEN2011_serial == NULL) || (ATEN2011_port == NULL))
-		return;
-
-	/* flush and chase */
-	ATEN2011_port->chaseResponsePending = 1;
-
-	if (serial->dev) {
-		/* flush and block until tx is empty */
-		ATEN2011_block_until_chase_response(tty, ATEN2011_port);
-	}
-
-	if (break_state == -1)
-		data = ATEN2011_port->shadowLCR | LCR_SET_BREAK;
-	else
-		data = ATEN2011_port->shadowLCR & ~LCR_SET_BREAK;
-
-	ATEN2011_port->shadowLCR = data;
-	dbg("ATEN2011_break ATEN2011_port->shadowLCR is %x",
-		ATEN2011_port->shadowLCR);
-	set_uart_reg(port, LINE_CONTROL_REGISTER, ATEN2011_port->shadowLCR);
-
-	return;
-}
-
-static int ATEN2011_write_room(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	int i;
-	int room = 0;
-	struct ATENINTL_port *ATEN2011_port;
-
-	ATEN2011_port = usb_get_serial_port_data(port);
-	if (ATEN2011_port == NULL) {
-		dbg("%s", "ATEN2011_break:leaving ...........");
-		return -1;
-	}
-
-	for (i = 0; i < NUM_URBS; ++i)
-		if (ATEN2011_port->write_urb_pool[i]->status != -EINPROGRESS)
-			room += URB_TRANSFER_BUFFER_SIZE;
-
-	dbg("%s - returns %d", __func__, room);
-	return room;
-
-}
-
-static int ATEN2011_write(struct tty_struct *tty, struct usb_serial_port *port,
-			  const unsigned char *data, int count)
-{
-	int status;
-	int i;
-	int bytes_sent = 0;
-	int transfer_size;
-	int minor;
-
-	struct ATENINTL_port *ATEN2011_port;
-	struct usb_serial *serial;
-	struct ATENINTL_serial *ATEN2011_serial;
-	struct urb *urb;
-	const unsigned char *current_position = data;
-	unsigned char *data1;
-	dbg("%s", "entering ...........");
-
-	serial = port->serial;
-
-	ATEN2011_port = usb_get_serial_port_data(port);
-	if (ATEN2011_port == NULL) {
-		dbg("%s", "ATEN2011_port is NULL");
-		return -1;
-	}
-
-	ATEN2011_serial = usb_get_serial_data(serial);
-	if (ATEN2011_serial == NULL) {
-		dbg("%s", "ATEN2011_serial is NULL");
-		return -1;
-	}
-
-	/* try to find a free urb in the list */
-	urb = NULL;
-
-	for (i = 0; i < NUM_URBS; ++i) {
-		if (ATEN2011_port->write_urb_pool[i]->status != -EINPROGRESS) {
-			urb = ATEN2011_port->write_urb_pool[i];
-			dbg("URB:%d", i);
-			break;
-		}
-	}
-
-	if (urb == NULL) {
-		dbg("%s - no more free urbs", __func__);
-		goto exit;
-	}
-
-	if (urb->transfer_buffer == NULL) {
-		urb->transfer_buffer =
-		    kmalloc(URB_TRANSFER_BUFFER_SIZE, GFP_KERNEL);
-
-		if (urb->transfer_buffer == NULL) {
-			err("%s no more kernel memory...", __func__);
-			goto exit;
-		}
-	}
-	transfer_size = min(count, URB_TRANSFER_BUFFER_SIZE);
-
-	memcpy(urb->transfer_buffer, current_position, transfer_size);
-	/* usb_serial_debug_data (__FILE__, __func__, transfer_size, urb->transfer_buffer); */
-
-	/* fill urb with data and submit  */
-	minor = port->serial->minor;
-	if (minor == SERIAL_TTY_NO_MINOR)
-		minor = 0;
-	if ((ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2)
-	    && (((__u16) port->number - (__u16) (minor)) != 0)) {
-		usb_fill_bulk_urb(urb, ATEN2011_serial->serial->dev,
-				  usb_sndbulkpipe(ATEN2011_serial->serial->dev,
-						  (port->
-						   bulk_out_endpointAddress) +
-						  2), urb->transfer_buffer,
-				  transfer_size,
-				  ATEN2011_bulk_out_data_callback,
-				  ATEN2011_port);
-	} else
-
-		usb_fill_bulk_urb(urb,
-				  ATEN2011_serial->serial->dev,
-				  usb_sndbulkpipe(ATEN2011_serial->serial->dev,
-						  port->
-						  bulk_out_endpointAddress),
-				  urb->transfer_buffer, transfer_size,
-				  ATEN2011_bulk_out_data_callback,
-				  ATEN2011_port);
-
-	data1 = urb->transfer_buffer;
-	dbg("bulkout endpoint is %d", port->bulk_out_endpointAddress);
-	/* for(i=0;i < urb->actual_length;i++) */
-		/* dbg("Data is %c ",data1[i]); */
-
-	/* send it down the pipe */
-	status = usb_submit_urb(urb, GFP_ATOMIC);
-
-	if (status) {
-		err("%s - usb_submit_urb(write bulk) failed with status = %d",
-		    __func__, status);
-		bytes_sent = status;
-		goto exit;
-	}
-	bytes_sent = transfer_size;
-	ATEN2011_port->icount.tx += transfer_size;
-	dbg("ATEN2011_port->icount.tx is %d:", ATEN2011_port->icount.tx);
-
-exit:
-	return bytes_sent;
-}
-
-static void ATEN2011_throttle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct ATENINTL_port *ATEN2011_port;
-	int status;
-
-	dbg("- port %d", port->number);
-
-	ATEN2011_port = usb_get_serial_port_data(port);
-
-	if (ATEN2011_port == NULL)
-		return;
-
-	if (!ATEN2011_port->open) {
-		dbg("%s", "port not opened");
-		return;
-	}
-
-	dbg("%s", "Entering .......... ");
-
-	if (!tty) {
-		dbg("%s - no tty available", __func__);
-		return;
-	}
-
-	/* if we are implementing XON/XOFF, send the stop character */
-	if (I_IXOFF(tty)) {
-		unsigned char stop_char = STOP_CHAR(tty);
-		status = ATEN2011_write(tty, port, &stop_char, 1);
-		if (status <= 0)
-			return;
-	}
-
-	/* if we are implementing RTS/CTS, toggle that line */
-	if (tty->termios->c_cflag & CRTSCTS) {
-		ATEN2011_port->shadowMCR &= ~MCR_RTS;
-		status = set_uart_reg(port, MODEM_CONTROL_REGISTER,
-				      ATEN2011_port->shadowMCR);
-		if (status < 0)
-			return;
-	}
-
-	return;
-}
-
-static void ATEN2011_unthrottle(struct tty_struct *tty)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	int status;
-	struct ATENINTL_port *ATEN2011_port = usb_get_serial_port_data(port);
-
-	if (ATEN2011_port == NULL)
-		return;
-
-	if (!ATEN2011_port->open) {
-		dbg("%s - port not opened", __func__);
-		return;
-	}
-
-	dbg("%s", "Entering .......... ");
-
-	if (!tty) {
-		dbg("%s - no tty available", __func__);
-		return;
-	}
-
-	/* if we are implementing XON/XOFF, send the start character */
-	if (I_IXOFF(tty)) {
-		unsigned char start_char = START_CHAR(tty);
-		status = ATEN2011_write(tty, port, &start_char, 1);
-		if (status <= 0)
-			return;
-	}
-
-	/* if we are implementing RTS/CTS, toggle that line */
-	if (tty->termios->c_cflag & CRTSCTS) {
-		ATEN2011_port->shadowMCR |= MCR_RTS;
-		status = set_uart_reg(port, MODEM_CONTROL_REGISTER,
-				      ATEN2011_port->shadowMCR);
-		if (status < 0)
-			return;
-	}
-
-	return;
-}
-
-static int ATEN2011_tiocmget(struct tty_struct *tty, struct file *file)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct ATENINTL_port *ATEN2011_port;
-	unsigned int result;
-	__u16 msr;
-	__u16 mcr;
-	/* unsigned int mcr; */
-	int status = 0;
-	ATEN2011_port = usb_get_serial_port_data(port);
-
-	dbg("%s - port %d", __func__, port->number);
-
-	if (ATEN2011_port == NULL)
-		return -ENODEV;
-
-	status = get_uart_reg(port, MODEM_STATUS_REGISTER, &msr);
-	status = get_uart_reg(port, MODEM_CONTROL_REGISTER, &mcr);
-	/* mcr = ATEN2011_port->shadowMCR; */
-	/* COMMENT2: the Fallowing three line are commented for updating only MSR values */
-	result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)
-	    | ((mcr & MCR_RTS) ? TIOCM_RTS : 0)
-	    | ((mcr & MCR_LOOPBACK) ? TIOCM_LOOP : 0)
-	    | ((msr & ATEN2011_MSR_CTS) ? TIOCM_CTS : 0)
-	    | ((msr & ATEN2011_MSR_CD) ? TIOCM_CAR : 0)
-	    | ((msr & ATEN2011_MSR_RI) ? TIOCM_RI : 0)
-	    | ((msr & ATEN2011_MSR_DSR) ? TIOCM_DSR : 0);
-
-	dbg("%s - 0x%04X", __func__, result);
-
-	return result;
-}
-
-static int ATEN2011_tiocmset(struct tty_struct *tty, struct file *file,
-			     unsigned int set, unsigned int clear)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct ATENINTL_port *ATEN2011_port;
-	unsigned int mcr;
-	unsigned int status;
-
-	dbg("%s - port %d", __func__, port->number);
-
-	ATEN2011_port = usb_get_serial_port_data(port);
-
-	if (ATEN2011_port == NULL)
-		return -ENODEV;
-
-	mcr = ATEN2011_port->shadowMCR;
-	if (clear & TIOCM_RTS)
-		mcr &= ~MCR_RTS;
-	if (clear & TIOCM_DTR)
-		mcr &= ~MCR_DTR;
-	if (clear & TIOCM_LOOP)
-		mcr &= ~MCR_LOOPBACK;
-
-	if (set & TIOCM_RTS)
-		mcr |= MCR_RTS;
-	if (set & TIOCM_DTR)
-		mcr |= MCR_DTR;
-	if (set & TIOCM_LOOP)
-		mcr |= MCR_LOOPBACK;
-
-	ATEN2011_port->shadowMCR = mcr;
-
-	status = set_uart_reg(port, MODEM_CONTROL_REGISTER, mcr);
-	if (status < 0) {
-		dbg("setting MODEM_CONTROL_REGISTER Failed");
-		return -1;
-	}
-
-	return 0;
-}
-
-static void ATEN2011_set_termios(struct tty_struct *tty,
-				 struct usb_serial_port *port,
-				 struct ktermios *old_termios)
-{
-	int status;
-	unsigned int cflag;
-	struct usb_serial *serial;
-	struct ATENINTL_port *ATEN2011_port;
-
-	dbg("ATEN2011_set_termios: START");
-
-	serial = port->serial;
-
-	ATEN2011_port = usb_get_serial_port_data(port);
-
-	if (ATEN2011_port == NULL)
-		return;
-
-	if (!ATEN2011_port->open) {
-		dbg("%s - port not opened", __func__);
-		return;
-	}
-
-	dbg("%s", "setting termios - ");
-
-	cflag = tty->termios->c_cflag;
-
-	dbg("%s - cflag %08x iflag %08x", __func__,
-	    tty->termios->c_cflag, RELEVANT_IFLAG(tty->termios->c_iflag));
-
-	if (old_termios) {
-		dbg("%s - old clfag %08x old iflag %08x", __func__,
-		    old_termios->c_cflag, RELEVANT_IFLAG(old_termios->c_iflag));
-	}
-
-	dbg("%s - port %d", __func__, port->number);
-
-	/* change the port settings to the new ones specified */
-
-	ATEN2011_change_port_settings(tty, ATEN2011_port, old_termios);
-
-	if (!ATEN2011_port->read_urb) {
-		dbg("%s", "URB KILLED !!!!!");
-		return;
-	}
-
-	if (ATEN2011_port->read_urb->status != -EINPROGRESS) {
-		ATEN2011_port->read_urb->dev = serial->dev;
-		status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC);
-		if (status) {
-			dbg
-			    (" usb_submit_urb(read bulk) failed, status = %d",
-			     status);
-		}
-	}
-	return;
-}
-
-static int get_lsr_info(struct tty_struct *tty,
-			struct ATENINTL_port *ATEN2011_port,
-			unsigned int __user *value)
-{
-	int count;
-	unsigned int result = 0;
-
-	count = ATEN2011_chars_in_buffer(tty);
-	if (count == 0) {
-		dbg("%s -- Empty", __func__);
-		result = TIOCSER_TEMT;
-	}
-
-	if (copy_to_user(value, &result, sizeof(int)))
-		return -EFAULT;
-	return 0;
-}
-
-static int get_number_bytes_avail(struct tty_struct *tty,
-				  struct ATENINTL_port *ATEN2011_port,
-				  unsigned int __user *value)
-{
-	unsigned int result = 0;
-
-	if (!tty)
-		return -ENOIOCTLCMD;
-
-	result = tty->read_cnt;
-
-	dbg("%s(%d) = %d", __func__, ATEN2011_port->port->number, result);
-	if (copy_to_user(value, &result, sizeof(int)))
-		return -EFAULT;
-
-	return -ENOIOCTLCMD;
-}
-
-static int set_modem_info(struct ATENINTL_port *ATEN2011_port, unsigned int cmd,
-			  unsigned int __user *value)
-{
-	unsigned int mcr;
-	unsigned int arg;
-	__u16 Data;
-	int status;
-	struct usb_serial_port *port;
-
-	if (ATEN2011_port == NULL)
-		return -1;
-
-	port = (struct usb_serial_port *)ATEN2011_port->port;
-
-	mcr = ATEN2011_port->shadowMCR;
-
-	if (copy_from_user(&arg, value, sizeof(int)))
-		return -EFAULT;
-
-	switch (cmd) {
-	case TIOCMBIS:
-		if (arg & TIOCM_RTS)
-			mcr |= MCR_RTS;
-		if (arg & TIOCM_DTR)
-			mcr |= MCR_RTS;
-		if (arg & TIOCM_LOOP)
-			mcr |= MCR_LOOPBACK;
-		break;
-
-	case TIOCMBIC:
-		if (arg & TIOCM_RTS)
-			mcr &= ~MCR_RTS;
-		if (arg & TIOCM_DTR)
-			mcr &= ~MCR_RTS;
-		if (arg & TIOCM_LOOP)
-			mcr &= ~MCR_LOOPBACK;
-		break;
-
-	case TIOCMSET:
-		/* turn off the RTS and DTR and LOOPBACK
-		 * and then only turn on what was asked to */
-		mcr &= ~(MCR_RTS | MCR_DTR | MCR_LOOPBACK);
-		mcr |= ((arg & TIOCM_RTS) ? MCR_RTS : 0);
-		mcr |= ((arg & TIOCM_DTR) ? MCR_DTR : 0);
-		mcr |= ((arg & TIOCM_LOOP) ? MCR_LOOPBACK : 0);
-		break;
-	}
-
-	ATEN2011_port->shadowMCR = mcr;
-
-	Data = ATEN2011_port->shadowMCR;
-	status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-	if (status < 0) {
-		dbg("setting MODEM_CONTROL_REGISTER Failed");
-		return -1;
-	}
-
-	return 0;
-}
-
-static int get_modem_info(struct ATENINTL_port *ATEN2011_port,
-			  unsigned int __user *value)
-{
-	unsigned int result = 0;
-	__u16 msr;
-	unsigned int mcr = ATEN2011_port->shadowMCR;
-	int status;
-
-	status = get_uart_reg(ATEN2011_port->port, MODEM_STATUS_REGISTER, &msr);
-	result = ((mcr & MCR_DTR) ? TIOCM_DTR : 0)	/* 0x002 */
-	    |((mcr & MCR_RTS) ? TIOCM_RTS : 0)	/* 0x004 */
-	    |((msr & ATEN2011_MSR_CTS) ? TIOCM_CTS : 0)	/* 0x020 */
-	    |((msr & ATEN2011_MSR_CD) ? TIOCM_CAR : 0)	/* 0x040 */
-	    |((msr & ATEN2011_MSR_RI) ? TIOCM_RI : 0)	/* 0x080 */
-	    |((msr & ATEN2011_MSR_DSR) ? TIOCM_DSR : 0);	/* 0x100 */
-
-	dbg("%s -- %x", __func__, result);
-
-	if (copy_to_user(value, &result, sizeof(int)))
-		return -EFAULT;
-	return 0;
-}
-
-static int get_serial_info(struct ATENINTL_port *ATEN2011_port,
-			   struct serial_struct __user *retinfo)
-{
-	struct serial_struct tmp;
-
-	if (ATEN2011_port == NULL)
-		return -1;
-
-	if (!retinfo)
-		return -EFAULT;
-
-	memset(&tmp, 0, sizeof(tmp));
-
-	tmp.type = PORT_16550A;
-	tmp.line = ATEN2011_port->port->serial->minor;
-	if (tmp.line == SERIAL_TTY_NO_MINOR)
-		tmp.line = 0;
-	tmp.port = ATEN2011_port->port->number;
-	tmp.irq = 0;
-	tmp.flags = ASYNC_SKIP_TEST | ASYNC_AUTO_IRQ;
-	tmp.xmit_fifo_size = NUM_URBS * URB_TRANSFER_BUFFER_SIZE;
-	tmp.baud_base = 9600;
-	tmp.close_delay = 5 * HZ;
-	tmp.closing_wait = 30 * HZ;
-
-	if (copy_to_user(retinfo, &tmp, sizeof(*retinfo)))
-		return -EFAULT;
-	return 0;
-}
-
-static int ATEN2011_ioctl(struct tty_struct *tty, struct file *file,
-			  unsigned int cmd, unsigned long arg)
-{
-	struct usb_serial_port *port = tty->driver_data;
-	struct ATENINTL_port *ATEN2011_port;
-	struct async_icount cnow;
-	struct async_icount cprev;
-	struct serial_icounter_struct icount;
-	int ATENret = 0;
-	unsigned int __user *user_arg = (unsigned int __user *)arg;
-
-	ATEN2011_port = usb_get_serial_port_data(port);
-
-	if (ATEN2011_port == NULL)
-		return -1;
-
-	dbg("%s - port %d, cmd = 0x%x", __func__, port->number, cmd);
-
-	switch (cmd) {
-		/* return number of bytes available */
-
-	case TIOCINQ:
-		dbg("%s (%d) TIOCINQ", __func__, port->number);
-		return get_number_bytes_avail(tty, ATEN2011_port, user_arg);
-		break;
-
-	case TIOCOUTQ:
-		dbg("%s (%d) TIOCOUTQ", __func__, port->number);
-		return put_user(ATEN2011_chars_in_buffer(tty), user_arg);
-		break;
-
-	case TIOCSERGETLSR:
-		dbg("%s (%d) TIOCSERGETLSR", __func__, port->number);
-		return get_lsr_info(tty, ATEN2011_port, user_arg);
-		return 0;
-
-	case TIOCMBIS:
-	case TIOCMBIC:
-	case TIOCMSET:
-		dbg("%s (%d) TIOCMSET/TIOCMBIC/TIOCMSET", __func__,
-		    port->number);
-		ATENret = set_modem_info(ATEN2011_port, cmd, user_arg);
-		return ATENret;
-
-	case TIOCMGET:
-		dbg("%s (%d) TIOCMGET", __func__, port->number);
-		return get_modem_info(ATEN2011_port, user_arg);
-
-	case TIOCGSERIAL:
-		dbg("%s (%d) TIOCGSERIAL", __func__, port->number);
-		return get_serial_info(ATEN2011_port,
-				       (struct serial_struct __user *)arg);
-
-	case TIOCSSERIAL:
-		dbg("%s (%d) TIOCSSERIAL", __func__, port->number);
-		break;
-
-	case TIOCMIWAIT:
-		dbg("%s (%d) TIOCMIWAIT", __func__, port->number);
-		cprev = ATEN2011_port->icount;
-		while (1) {
-			/* see if a signal did it */
-			if (signal_pending(current))
-				return -ERESTARTSYS;
-			cnow = ATEN2011_port->icount;
-			if (cnow.rng == cprev.rng && cnow.dsr == cprev.dsr &&
-			    cnow.dcd == cprev.dcd && cnow.cts == cprev.cts)
-				return -EIO;	/* no change => error */
-			if (((arg & TIOCM_RNG) && (cnow.rng != cprev.rng)) ||
-			    ((arg & TIOCM_DSR) && (cnow.dsr != cprev.dsr)) ||
-			    ((arg & TIOCM_CD) && (cnow.dcd != cprev.dcd)) ||
-			    ((arg & TIOCM_CTS) && (cnow.cts != cprev.cts))) {
-				return 0;
-			}
-			cprev = cnow;
-		}
-		/* NOTREACHED */
-		break;
-
-	case TIOCGICOUNT:
-		cnow = ATEN2011_port->icount;
-		icount.cts = cnow.cts;
-		icount.dsr = cnow.dsr;
-		icount.rng = cnow.rng;
-		icount.dcd = cnow.dcd;
-		icount.rx = cnow.rx;
-		icount.tx = cnow.tx;
-		icount.frame = cnow.frame;
-		icount.overrun = cnow.overrun;
-		icount.parity = cnow.parity;
-		icount.brk = cnow.brk;
-		icount.buf_overrun = cnow.buf_overrun;
-
-		dbg("%s (%d) TIOCGICOUNT RX=%d, TX=%d", __func__,
-		    port->number, icount.rx, icount.tx);
-		if (copy_to_user((void __user *)arg, &icount, sizeof(icount)))
-			return -EFAULT;
-		return 0;
-
-	default:
-		break;
-	}
-
-	return -ENOIOCTLCMD;
-}
-
-static int ATEN2011_calc_baud_rate_divisor(int baudRate, int *divisor,
-					   __u16 *clk_sel_val)
-{
-	dbg("%s - %d", __func__, baudRate);
-
-	if (baudRate <= 115200) {
-		*divisor = 115200 / baudRate;
-		*clk_sel_val = 0x0;
-	}
-	if ((baudRate > 115200) && (baudRate <= 230400)) {
-		*divisor = 230400 / baudRate;
-		*clk_sel_val = 0x10;
-	} else if ((baudRate > 230400) && (baudRate <= 403200)) {
-		*divisor = 403200 / baudRate;
-		*clk_sel_val = 0x20;
-	} else if ((baudRate > 403200) && (baudRate <= 460800)) {
-		*divisor = 460800 / baudRate;
-		*clk_sel_val = 0x30;
-	} else if ((baudRate > 460800) && (baudRate <= 806400)) {
-		*divisor = 806400 / baudRate;
-		*clk_sel_val = 0x40;
-	} else if ((baudRate > 806400) && (baudRate <= 921600)) {
-		*divisor = 921600 / baudRate;
-		*clk_sel_val = 0x50;
-	} else if ((baudRate > 921600) && (baudRate <= 1572864)) {
-		*divisor = 1572864 / baudRate;
-		*clk_sel_val = 0x60;
-	} else if ((baudRate > 1572864) && (baudRate <= 3145728)) {
-		*divisor = 3145728 / baudRate;
-		*clk_sel_val = 0x70;
-	}
-	return 0;
-}
-
-static int ATEN2011_send_cmd_write_baud_rate(struct ATENINTL_port
-					     *ATEN2011_port, int baudRate)
-{
-	int divisor = 0;
-	int status;
-	__u16 Data;
-	unsigned char number;
-	__u16 clk_sel_val;
-	struct usb_serial_port *port;
-	int minor;
-
-	if (ATEN2011_port == NULL)
-		return -1;
-
-	port = (struct usb_serial_port *)ATEN2011_port->port;
-
-	dbg("%s", "Entering .......... ");
-
-	minor = ATEN2011_port->port->serial->minor;
-	if (minor == SERIAL_TTY_NO_MINOR)
-		minor = 0;
-	number = ATEN2011_port->port->number - minor;
-
-	dbg("%s - port = %d, baud = %d", __func__,
-	    ATEN2011_port->port->number, baudRate);
-	/* reset clk_uart_sel in spregOffset */
-	if (baudRate > 115200) {
-#ifdef HW_flow_control
-		/*
-		 * NOTE: need to see the pther register to modify
-		 * setting h/w flow control bit to 1;
-		 */
-		/* Data = ATEN2011_port->shadowMCR; */
-		Data = 0x2b;
-		ATEN2011_port->shadowMCR = Data;
-		status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-		if (status < 0) {
-			dbg("Writing spreg failed in set_serial_baud");
-			return -1;
-		}
-#endif
-
-	} else {
-#ifdef HW_flow_control
-		/* setting h/w flow control bit to 0; */
-		/* Data = ATEN2011_port->shadowMCR; */
-		Data = 0xb;
-		ATEN2011_port->shadowMCR = Data;
-		status = set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-		if (status < 0) {
-			dbg("Writing spreg failed in set_serial_baud");
-			return -1;
-		}
-#endif
-
-	}
-
-	if (1)			/* baudRate <= 115200) */ {
-		clk_sel_val = 0x0;
-		Data = 0x0;
-		status =
-		    ATEN2011_calc_baud_rate_divisor(baudRate, &divisor,
-						    &clk_sel_val);
-		status = get_reg_sync(port, ATEN2011_port->SpRegOffset, &Data);
-		if (status < 0) {
-			dbg("reading spreg failed in set_serial_baud");
-			return -1;
-		}
-		Data = (Data & 0x8f) | clk_sel_val;
-		status = set_reg_sync(port, ATEN2011_port->SpRegOffset, Data);
-		if (status < 0) {
-			dbg("Writing spreg failed in set_serial_baud");
-			return -1;
-		}
-		/* Calculate the Divisor */
-
-		if (status) {
-			err("%s - bad baud rate", __func__);
-			dbg("%s", "bad baud rate");
-			return status;
-		}
-		/* Enable access to divisor latch */
-		Data = ATEN2011_port->shadowLCR | SERIAL_LCR_DLAB;
-		ATEN2011_port->shadowLCR = Data;
-		set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-
-		/* Write the divisor */
-		Data = (unsigned char)(divisor & 0xff);
-		dbg("set_serial_baud Value to write DLL is %x", Data);
-		set_uart_reg(port, DIVISOR_LATCH_LSB, Data);
-
-		Data = (unsigned char)((divisor & 0xff00) >> 8);
-		dbg("set_serial_baud Value to write DLM is %x", Data);
-		set_uart_reg(port, DIVISOR_LATCH_MSB, Data);
-
-		/* Disable access to divisor latch */
-		Data = ATEN2011_port->shadowLCR & ~SERIAL_LCR_DLAB;
-		ATEN2011_port->shadowLCR = Data;
-		set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-
-	}
-
-	return status;
-}
-
-static void ATEN2011_change_port_settings(struct tty_struct *tty,
-					  struct ATENINTL_port *ATEN2011_port,
-					  struct ktermios *old_termios)
-{
-	int baud;
-	unsigned cflag;
-	unsigned iflag;
-	__u8 lData;
-	__u8 lParity;
-	__u8 lStop;
-	int status;
-	__u16 Data;
-	struct usb_serial_port *port;
-	struct usb_serial *serial;
-
-	if (ATEN2011_port == NULL)
-		return;
-
-	port = (struct usb_serial_port *)ATEN2011_port->port;
-
-	serial = port->serial;
-
-	dbg("%s - port %d", __func__, ATEN2011_port->port->number);
-
-	if (!ATEN2011_port->open) {
-		dbg("%s - port not opened", __func__);
-		return;
-	}
-
-	if ((!tty) || (!tty->termios)) {
-		dbg("%s - no tty structures", __func__);
-		return;
-	}
-
-	dbg("%s", "Entering .......... ");
-
-	lData = LCR_BITS_8;
-	lStop = LCR_STOP_1;
-	lParity = LCR_PAR_NONE;
-
-	cflag = tty->termios->c_cflag;
-	iflag = tty->termios->c_iflag;
-
-	/* Change the number of bits */
-
-	/* COMMENT1: the below Line"if(cflag & CSIZE)" is added for the errors we get for serial loop data test i.e serial_loopback.pl -v */
-	/* if(cflag & CSIZE) */
-	{
-		switch (cflag & CSIZE) {
-		case CS5:
-			lData = LCR_BITS_5;
-			break;
-
-		case CS6:
-			lData = LCR_BITS_6;
-			break;
-
-		case CS7:
-			lData = LCR_BITS_7;
-			break;
-		default:
-		case CS8:
-			lData = LCR_BITS_8;
-			break;
-		}
-	}
-	/* Change the Parity bit */
-	if (cflag & PARENB) {
-		if (cflag & PARODD) {
-			lParity = LCR_PAR_ODD;
-			dbg("%s - parity = odd", __func__);
-		} else {
-			lParity = LCR_PAR_EVEN;
-			dbg("%s - parity = even", __func__);
-		}
-
-	} else {
-		dbg("%s - parity = none", __func__);
-	}
-
-	if (cflag & CMSPAR)
-		lParity = lParity | 0x20;
-
-	/* Change the Stop bit */
-	if (cflag & CSTOPB) {
-		lStop = LCR_STOP_2;
-		dbg("%s - stop bits = 2", __func__);
-	} else {
-		lStop = LCR_STOP_1;
-		dbg("%s - stop bits = 1", __func__);
-	}
-
-	/* Update the LCR with the correct value */
-	ATEN2011_port->shadowLCR &=
-	    ~(LCR_BITS_MASK | LCR_STOP_MASK | LCR_PAR_MASK);
-	ATEN2011_port->shadowLCR |= (lData | lParity | lStop);
-
-	dbg
-	    ("ATEN2011_change_port_settings ATEN2011_port->shadowLCR is %x",
-	     ATEN2011_port->shadowLCR);
-	/* Disable Interrupts */
-	Data = 0x00;
-	set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-
-	Data = 0x00;
-	set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
-
-	Data = 0xcf;
-	set_uart_reg(port, FIFO_CONTROL_REGISTER, Data);
-
-	/* Send the updated LCR value to the ATEN2011 */
-	Data = ATEN2011_port->shadowLCR;
-
-	set_uart_reg(port, LINE_CONTROL_REGISTER, Data);
-
-	Data = 0x00b;
-	ATEN2011_port->shadowMCR = Data;
-	set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-	Data = 0x00b;
-	set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-
-	/* set up the MCR register and send it to the ATEN2011 */
-
-	ATEN2011_port->shadowMCR = MCR_MASTER_IE;
-	if (cflag & CBAUD)
-		ATEN2011_port->shadowMCR |= (MCR_DTR | MCR_RTS);
-
-	if (cflag & CRTSCTS)
-		ATEN2011_port->shadowMCR |= (MCR_XON_ANY);
-	else
-		ATEN2011_port->shadowMCR &= ~(MCR_XON_ANY);
-
-	Data = ATEN2011_port->shadowMCR;
-	set_uart_reg(port, MODEM_CONTROL_REGISTER, Data);
-
-	/* Determine divisor based on baud rate */
-	baud = tty_get_baud_rate(tty);
-
-	if (!baud) {
-		/* pick a default, any default... */
-		dbg("%s", "Picked default baud...");
-		baud = 9600;
-	}
-
-	dbg("%s - baud rate = %d", __func__, baud);
-	status = ATEN2011_send_cmd_write_baud_rate(ATEN2011_port, baud);
-
-	/* Enable Interrupts */
-	Data = 0x0c;
-	set_uart_reg(port, INTERRUPT_ENABLE_REGISTER, Data);
-
-	if (ATEN2011_port->read_urb->status != -EINPROGRESS) {
-		ATEN2011_port->read_urb->dev = serial->dev;
-
-		status = usb_submit_urb(ATEN2011_port->read_urb, GFP_ATOMIC);
-
-		if (status) {
-			dbg
-			    (" usb_submit_urb(read bulk) failed, status = %d",
-			     status);
-		}
-	}
-	dbg
-	    ("ATEN2011_change_port_settings ATEN2011_port->shadowLCR is End %x",
-	     ATEN2011_port->shadowLCR);
-
-	return;
-}
-
-static int ATEN2011_calc_num_ports(struct usb_serial *serial)
-{
-
-	__u16 Data = 0x00;
-	int ret = 0;
-	int ATEN2011_2or4ports;
-	ret = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
-			      ATEN_RDREQ, ATEN_RD_RTYPE, 0, GPIO_REGISTER,
-			      &Data, VENDOR_READ_LENGTH, ATEN_WDR_TIMEOUT);
-
-/* ghostgum: here is where the problem appears to bet */
-/* Which of the following are needed? */
-/* Greg used the serial->type->num_ports=2 */
-/* But the code in the ATEN2011_open relies on serial->num_ports=2 */
-	if ((Data & 0x01) == 0) {
-		ATEN2011_2or4ports = 2;
-		serial->type->num_ports = 2;
-		serial->num_ports = 2;
-	}
-	/* else if(serial->interface->cur_altsetting->desc.bNumEndpoints == 9) */
-	else {
-		ATEN2011_2or4ports = 4;
-		serial->type->num_ports = 4;
-		serial->num_ports = 4;
-
-	}
-
-	return ATEN2011_2or4ports;
-}
-
-static int ATEN2011_startup(struct usb_serial *serial)
-{
-	struct ATENINTL_serial *ATEN2011_serial;
-	struct ATENINTL_port *ATEN2011_port;
-	struct usb_device *dev;
-	int i, status;
-	int minor;
-
-	__u16 Data;
-	dbg("%s", " ATEN2011_startup :entering..........");
-
-	if (!serial) {
-		dbg("%s", "Invalid Handler");
-		return -1;
-	}
-
-	dev = serial->dev;
-
-	dbg("%s", "Entering...");
-
-	/* create our private serial structure */
-	ATEN2011_serial = kzalloc(sizeof(struct ATENINTL_serial), GFP_KERNEL);
-	if (ATEN2011_serial == NULL) {
-		err("%s - Out of memory", __func__);
-		return -ENOMEM;
-	}
-
-	/* resetting the private structure field values to zero */
-	memset(ATEN2011_serial, 0, sizeof(struct ATENINTL_serial));
-
-	ATEN2011_serial->serial = serial;
-	/* initilize status polling flag to 0 */
-	ATEN2011_serial->status_polling_started = 0;
-
-	usb_set_serial_data(serial, ATEN2011_serial);
-	ATEN2011_serial->ATEN2011_spectrum_2or4ports =
-	    ATEN2011_calc_num_ports(serial);
-	/* we set up the pointers to the endpoints in the ATEN2011_open *
-	 * function, as the structures aren't created yet.             */
-
-	/* set up port private structures */
-	for (i = 0; i < serial->num_ports; ++i) {
-		ATEN2011_port =
-		    kmalloc(sizeof(struct ATENINTL_port), GFP_KERNEL);
-		if (ATEN2011_port == NULL) {
-			err("%s - Out of memory", __func__);
-			usb_set_serial_data(serial, NULL);
-			kfree(ATEN2011_serial);
-			return -ENOMEM;
-		}
-		memset(ATEN2011_port, 0, sizeof(struct ATENINTL_port));
-
-		/*
-		 * Initialize all port interrupt end point to port 0
-		 * int endpoint. Our device has only one interrupt end point
-		 * comman to all port
-		 */
-		/* serial->port[i]->interrupt_in_endpointAddress = serial->port[0]->interrupt_in_endpointAddress; */
-
-		ATEN2011_port->port = serial->port[i];
-		usb_set_serial_port_data(serial->port[i], ATEN2011_port);
-
-		minor = serial->port[i]->serial->minor;
-		if (minor == SERIAL_TTY_NO_MINOR)
-			minor = 0;
-		ATEN2011_port->port_num =
-		    ((serial->port[i]->number - minor) + 1);
-
-		if (ATEN2011_port->port_num == 1) {
-			ATEN2011_port->SpRegOffset = 0x0;
-			ATEN2011_port->ControlRegOffset = 0x1;
-			ATEN2011_port->DcrRegOffset = 0x4;
-		} else if ((ATEN2011_port->port_num == 2)
-			   && (ATEN2011_serial->ATEN2011_spectrum_2or4ports ==
-			       4)) {
-			ATEN2011_port->SpRegOffset = 0x8;
-			ATEN2011_port->ControlRegOffset = 0x9;
-			ATEN2011_port->DcrRegOffset = 0x16;
-		} else if ((ATEN2011_port->port_num == 2)
-			   && (ATEN2011_serial->ATEN2011_spectrum_2or4ports ==
-			       2)) {
-			ATEN2011_port->SpRegOffset = 0xa;
-			ATEN2011_port->ControlRegOffset = 0xb;
-			ATEN2011_port->DcrRegOffset = 0x19;
-		} else if ((ATEN2011_port->port_num == 3)
-			   && (ATEN2011_serial->ATEN2011_spectrum_2or4ports ==
-			       4)) {
-			ATEN2011_port->SpRegOffset = 0xa;
-			ATEN2011_port->ControlRegOffset = 0xb;
-			ATEN2011_port->DcrRegOffset = 0x19;
-		} else if ((ATEN2011_port->port_num == 4)
-			   && (ATEN2011_serial->ATEN2011_spectrum_2or4ports ==
-			       4)) {
-			ATEN2011_port->SpRegOffset = 0xc;
-			ATEN2011_port->ControlRegOffset = 0xd;
-			ATEN2011_port->DcrRegOffset = 0x1c;
-		}
-
-		usb_set_serial_port_data(serial->port[i], ATEN2011_port);
-
-		/* enable rx_disable bit in control register */
-
-		status = get_reg_sync(serial->port[i],
-				      ATEN2011_port->ControlRegOffset, &Data);
-		if (status < 0) {
-			dbg("Reading ControlReg failed status-0x%x",
-				status);
-			break;
-		} else
-			dbg
-			    ("ControlReg Reading success val is %x, status%d",
-			     Data, status);
-		Data |= 0x08;	/* setting driver done bit */
-		Data |= 0x04;	/* sp1_bit to have cts change reflect in modem status reg */
-
-		/* Data |= 0x20; */	/* rx_disable bit */
-		status = set_reg_sync(serial->port[i],
-				      ATEN2011_port->ControlRegOffset, Data);
-		if (status < 0) {
-			dbg
-			    ("Writing ControlReg failed(rx_disable) status-0x%x",
-			     status);
-			break;
-		} else
-			dbg
-			    ("ControlReg Writing success(rx_disable) status%d",
-			     status);
-
-		/*
-		 * Write default values in DCR (i.e 0x01 in DCR0, 0x05 in DCR2
-		 * and 0x24 in DCR3
-		 */
-		Data = 0x01;
-		status = set_reg_sync(serial->port[i],
-				      (__u16)(ATEN2011_port->DcrRegOffset + 0),
-				      Data);
-		if (status < 0) {
-			dbg("Writing DCR0 failed status-0x%x", status);
-			break;
-		} else
-			dbg("DCR0 Writing success status%d", status);
-
-		Data = 0x05;
-		status = set_reg_sync(serial->port[i],
-				      (__u16)(ATEN2011_port->DcrRegOffset + 1),
-				      Data);
-		if (status < 0) {
-			dbg("Writing DCR1 failed status-0x%x", status);
-			break;
-		} else
-			dbg("DCR1 Writing success status%d", status);
-
-		Data = 0x24;
-		status = set_reg_sync(serial->port[i],
-				      (__u16)(ATEN2011_port->DcrRegOffset + 2),
-				      Data);
-		if (status < 0) {
-			dbg("Writing DCR2 failed status-0x%x", status);
-			break;
-		} else
-			dbg("DCR2 Writing success status%d", status);
-
-		/* write values in clkstart0x0 and clkmulti 0x20 */
-		Data = 0x0;
-		status = set_reg_sync(serial->port[i], CLK_START_VALUE_REGISTER,
-				      Data);
-		if (status < 0) {
-			dbg
-			    ("Writing CLK_START_VALUE_REGISTER failed status-0x%x",
-			     status);
-			break;
-		} else
-			dbg
-			    ("CLK_START_VALUE_REGISTER Writing success status%d",
-			     status);
-
-		Data = 0x20;
-		status = set_reg_sync(serial->port[i], CLK_MULTI_REGISTER,
-				      Data);
-		if (status < 0) {
-			dbg
-			    ("Writing CLK_MULTI_REGISTER failed status-0x%x",
-			     status);
-			break;
-		} else
-			dbg("CLK_MULTI_REGISTER Writing success status%d",
-				status);
-
-		/* Zero Length flag register */
-		if ((ATEN2011_port->port_num != 1)
-		    && (ATEN2011_serial->ATEN2011_spectrum_2or4ports == 2)) {
-
-			Data = 0xff;
-			status = set_reg_sync(serial->port[i],
-					      (__u16)(ZLP_REG1 + ((__u16)ATEN2011_port->port_num)),
-					      Data);
-			dbg("ZLIP offset%x",
-				(__u16) (ZLP_REG1 +
-					 ((__u16) ATEN2011_port->port_num)));
-			if (status < 0) {
-				dbg
-				    ("Writing ZLP_REG%d failed status-0x%x",
-				     i + 2, status);
-				break;
-			} else
-				dbg("ZLP_REG%d Writing success status%d",
-					i + 2, status);
-		} else {
-			Data = 0xff;
-			status = set_reg_sync(serial->port[i],
-					      (__u16)(ZLP_REG1 + ((__u16)ATEN2011_port->port_num) - 0x1),
-					      Data);
-			dbg("ZLIP offset%x",
-				(__u16) (ZLP_REG1 +
-					 ((__u16) ATEN2011_port->port_num) -
-					 0x1));
-			if (status < 0) {
-				dbg
-				    ("Writing ZLP_REG%d failed status-0x%x",
-				     i + 1, status);
-				break;
-			} else
-				dbg("ZLP_REG%d Writing success status%d",
-					i + 1, status);
-
-		}
-		ATEN2011_port->control_urb = usb_alloc_urb(0, GFP_ATOMIC);
-		ATEN2011_port->ctrl_buf = kmalloc(16, GFP_KERNEL);
-
-	}
-
-	/* Zero Length flag enable */
-	Data = 0x0f;
-	status = set_reg_sync(serial->port[0], ZLP_REG5, Data);
-	if (status < 0) {
-		dbg("Writing ZLP_REG5 failed status-0x%x", status);
-		return -1;
-	} else
-		dbg("ZLP_REG5 Writing success status%d", status);
-
-	/* setting configuration feature to one */
-	usb_control_msg(serial->dev, usb_sndctrlpipe(serial->dev, 0),
-			(__u8) 0x03, 0x00, 0x01, 0x00, NULL, 0x00, 5 * HZ);
-	return 0;
-}
-
-static void ATEN2011_release(struct usb_serial *serial)
-{
-	int i;
-	struct ATENINTL_port *ATEN2011_port;
-
-	/* check for the ports to be closed,close the ports and disconnect */
-
-	/* free private structure allocated for serial port  *
-	 * stop reads and writes on all ports                */
-
-	for (i = 0; i < serial->num_ports; ++i) {
-		ATEN2011_port = usb_get_serial_port_data(serial->port[i]);
-		kfree(ATEN2011_port->ctrl_buf);
-		usb_kill_urb(ATEN2011_port->control_urb);
-		kfree(ATEN2011_port);
-		usb_set_serial_port_data(serial->port[i], NULL);
-	}
-
-	/* free private structure allocated for serial device */
-
-	kfree(usb_get_serial_data(serial));
-	usb_set_serial_data(serial, NULL);
-}
-
-static struct usb_serial_driver aten_serial_driver = {
-	.driver = {
-		.owner =	THIS_MODULE,
-		.name =		"aten2011",
-		},
-	.description =		DRIVER_DESC,
-	.id_table =		id_table,
-	.open =			ATEN2011_open,
-	.close =		ATEN2011_close,
-	.write =		ATEN2011_write,
-	.write_room =		ATEN2011_write_room,
-	.chars_in_buffer =	ATEN2011_chars_in_buffer,
-	.throttle =		ATEN2011_throttle,
-	.unthrottle =		ATEN2011_unthrottle,
-	.calc_num_ports =	ATEN2011_calc_num_ports,
-
-	.ioctl =		ATEN2011_ioctl,
-	.set_termios =		ATEN2011_set_termios,
-	.break_ctl =		ATEN2011_break,
-	.tiocmget =		ATEN2011_tiocmget,
-	.tiocmset =		ATEN2011_tiocmset,
-	.attach =		ATEN2011_startup,
-	.release =		ATEN2011_release,
-	.read_bulk_callback =	ATEN2011_bulk_in_callback,
-	.read_int_callback =	ATEN2011_interrupt_callback,
-};
-
-static struct usb_driver aten_driver = {
-	.name =		"aten2011",
-	.probe =	usb_serial_probe,
-	.disconnect =	usb_serial_disconnect,
-	.id_table =	id_table,
-};
-
-static int __init aten_init(void)
-{
-	int retval;
-
-	/* Register with the usb serial */
-	retval = usb_serial_register(&aten_serial_driver);
-	if (retval)
-		return retval;
-
-	printk(KERN_INFO KBUILD_MODNAME ":"
-	       DRIVER_DESC " " DRIVER_VERSION "\n");
-
-	/* Register with the usb */
-	retval = usb_register(&aten_driver);
-	if (retval)
-		usb_serial_deregister(&aten_serial_driver);
-
-	return retval;
-}
-
-static void __exit aten_exit(void)
-{
-	usb_deregister(&aten_driver);
-	usb_serial_deregister(&aten_serial_driver);
-}
-
-module_init(aten_init);
-module_exit(aten_exit);
-
-/* Module information */
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_LICENSE("GPL");
-
-MODULE_PARM_DESC(debug, "Debug enabled or not");
diff --git a/drivers/staging/udlfb/udlfb.c b/drivers/staging/udlfb/udlfb.c
index 0ab9d15..f5416af 100644
--- a/drivers/staging/udlfb/udlfb.c
+++ b/drivers/staging/udlfb/udlfb.c
@@ -21,6 +21,7 @@
 #include <linux/mm.h>
 #include <linux/fb.h>
 #include <linux/mutex.h>
+#include <linux/vmalloc.h>
 
 #include "udlfb.h"
 
diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c
index 24dfb33..a16c538 100644
--- a/drivers/usb/core/config.c
+++ b/drivers/usb/core/config.c
@@ -80,38 +80,18 @@ static int usb_parse_ss_endpoint_companion(struct device *ddev, int cfgno,
 	int max_tx;
 	int i;
 
-	/* Allocate space for the SS endpoint companion descriptor */
-	ep->ss_ep_comp = kzalloc(sizeof(struct usb_host_ss_ep_comp),
-			GFP_KERNEL);
-	if (!ep->ss_ep_comp)
-		return -ENOMEM;
 	desc = (struct usb_ss_ep_comp_descriptor *) buffer;
 	if (desc->bDescriptorType != USB_DT_SS_ENDPOINT_COMP) {
 		dev_warn(ddev, "No SuperSpeed endpoint companion for config %d "
 				" interface %d altsetting %d ep %d: "
 				"using minimum values\n",
 				cfgno, inum, asnum, ep->desc.bEndpointAddress);
-		ep->ss_ep_comp->desc.bLength = USB_DT_SS_EP_COMP_SIZE;
-		ep->ss_ep_comp->desc.bDescriptorType = USB_DT_SS_ENDPOINT_COMP;
-		ep->ss_ep_comp->desc.bMaxBurst = 0;
-		/*
-		 * Leave bmAttributes as zero, which will mean no streams for
-		 * bulk, and isoc won't support multiple bursts of packets.
-		 * With bursts of only one packet, and a Mult of 1, the max
-		 * amount of data moved per endpoint service interval is one
-		 * packet.
-		 */
-		if (usb_endpoint_xfer_isoc(&ep->desc) ||
-				usb_endpoint_xfer_int(&ep->desc))
-			ep->ss_ep_comp->desc.wBytesPerInterval =
-				ep->desc.wMaxPacketSize;
 		/*
 		 * The next descriptor is for an Endpoint or Interface,
 		 * no extra descriptors to copy into the companion structure,
 		 * and we didn't eat up any of the buffer.
 		 */
-		retval = 0;
-		goto valid;
+		return 0;
 	}
 	memcpy(&ep->ss_ep_comp->desc, desc, USB_DT_SS_EP_COMP_SIZE);
 	desc = &ep->ss_ep_comp->desc;
@@ -320,6 +300,28 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
 		buffer += i;
 		size -= i;
 
+		/* Allocate space for the SS endpoint companion descriptor */
+		endpoint->ss_ep_comp = kzalloc(sizeof(struct usb_host_ss_ep_comp),
+				GFP_KERNEL);
+		if (!endpoint->ss_ep_comp)
+			return -ENOMEM;
+
+		/* Fill in some default values (may be overwritten later) */
+		endpoint->ss_ep_comp->desc.bLength = USB_DT_SS_EP_COMP_SIZE;
+		endpoint->ss_ep_comp->desc.bDescriptorType = USB_DT_SS_ENDPOINT_COMP;
+		endpoint->ss_ep_comp->desc.bMaxBurst = 0;
+		/*
+		 * Leave bmAttributes as zero, which will mean no streams for
+		 * bulk, and isoc won't support multiple bursts of packets.
+		 * With bursts of only one packet, and a Mult of 1, the max
+		 * amount of data moved per endpoint service interval is one
+		 * packet.
+		 */
+		if (usb_endpoint_xfer_isoc(&endpoint->desc) ||
+				usb_endpoint_xfer_int(&endpoint->desc))
+			endpoint->ss_ep_comp->desc.wBytesPerInterval =
+				endpoint->desc.wMaxPacketSize;
+
 		if (size > 0) {
 			retval = usb_parse_ss_endpoint_companion(ddev, cfgno,
 					inum, asnum, endpoint, num_ep, buffer,
@@ -329,6 +331,10 @@ static int usb_parse_endpoint(struct device *ddev, int cfgno, int inum,
 				retval = buffer - buffer0;
 			}
 		} else {
+			dev_warn(ddev, "config %d interface %d altsetting %d "
+				"endpoint 0x%X has no "
+				"SuperSpeed companion descriptor\n",
+				cfgno, inum, asnum, d->bEndpointAddress);
 			retval = buffer - buffer0;
 		}
 	} else {
diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c
index dc2ac61..1d283e1 100644
--- a/drivers/usb/host/ehci-orion.c
+++ b/drivers/usb/host/ehci-orion.c
@@ -105,6 +105,7 @@ static int ehci_orion_setup(struct usb_hcd *hcd)
 	struct ehci_hcd *ehci = hcd_to_ehci(hcd);
 	int retval;
 
+	ehci_reset(ehci);
 	retval = ehci_halt(ehci);
 	if (retval)
 		return retval;
@@ -118,7 +119,6 @@ static int ehci_orion_setup(struct usb_hcd *hcd)
 
 	hcd->has_tt = 1;
 
-	ehci_reset(ehci);
 	ehci_port_power(ehci, 0);
 
 	return retval;
diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c
index f3aaba3..83cbecd 100644
--- a/drivers/usb/host/ohci-omap.c
+++ b/drivers/usb/host/ohci-omap.c
@@ -282,6 +282,7 @@ static int ohci_omap_init(struct usb_hcd *hcd)
 static void ohci_omap_stop(struct usb_hcd *hcd)
 {
 	dev_dbg(hcd->self.controller, "stopping USB Controller\n");
+	ohci_stop(hcd);
 	omap_ohci_clock_power(0);
 }
 
diff --git a/drivers/usb/host/xhci-dbg.c b/drivers/usb/host/xhci-dbg.c
index 2501c57..705e343 100644
--- a/drivers/usb/host/xhci-dbg.c
+++ b/drivers/usb/host/xhci-dbg.c
@@ -173,6 +173,7 @@ void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int
 {
 	void *addr;
 	u32 temp;
+	u64 temp_64;
 
 	addr = &ir_set->irq_pending;
 	temp = xhci_readl(xhci, addr);
@@ -200,25 +201,15 @@ void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int
 		xhci_dbg(xhci, "  WARN: %p: ir_set.rsvd = 0x%x\n",
 				addr, (unsigned int)temp);
 
-	addr = &ir_set->erst_base[0];
-	temp = xhci_readl(xhci, addr);
-	xhci_dbg(xhci, "  %p: ir_set.erst_base[0] = 0x%x\n",
-			addr, (unsigned int) temp);
-
-	addr = &ir_set->erst_base[1];
-	temp = xhci_readl(xhci, addr);
-	xhci_dbg(xhci, "  %p: ir_set.erst_base[1] = 0x%x\n",
-			addr, (unsigned int) temp);
+	addr = &ir_set->erst_base;
+	temp_64 = xhci_read_64(xhci, addr);
+	xhci_dbg(xhci, "  %p: ir_set.erst_base = @%08llx\n",
+			addr, temp_64);
 
-	addr = &ir_set->erst_dequeue[0];
-	temp = xhci_readl(xhci, addr);
-	xhci_dbg(xhci, "  %p: ir_set.erst_dequeue[0] = 0x%x\n",
-			addr, (unsigned int) temp);
-
-	addr = &ir_set->erst_dequeue[1];
-	temp = xhci_readl(xhci, addr);
-	xhci_dbg(xhci, "  %p: ir_set.erst_dequeue[1] = 0x%x\n",
-			addr, (unsigned int) temp);
+	addr = &ir_set->erst_dequeue;
+	temp_64 = xhci_read_64(xhci, addr);
+	xhci_dbg(xhci, "  %p: ir_set.erst_dequeue = @%08llx\n",
+			addr, temp_64);
 }
 
 void xhci_print_run_regs(struct xhci_hcd *xhci)
@@ -268,8 +259,7 @@ void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb)
 		xhci_dbg(xhci, "Link TRB:\n");
 		xhci_print_trb_offsets(xhci, trb);
 
-		address = trb->link.segment_ptr[0] +
-			(((u64) trb->link.segment_ptr[1]) << 32);
+		address = trb->link.segment_ptr;
 		xhci_dbg(xhci, "Next ring segment DMA address = 0x%llx\n", address);
 
 		xhci_dbg(xhci, "Interrupter target = 0x%x\n",
@@ -282,8 +272,7 @@ void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb)
 				(unsigned int) (trb->link.control & TRB_NO_SNOOP));
 		break;
 	case TRB_TYPE(TRB_TRANSFER):
-		address = trb->trans_event.buffer[0] +
-			(((u64) trb->trans_event.buffer[1]) << 32);
+		address = trb->trans_event.buffer;
 		/*
 		 * FIXME: look at flags to figure out if it's an address or if
 		 * the data is directly in the buffer field.
@@ -291,8 +280,7 @@ void xhci_debug_trb(struct xhci_hcd *xhci, union xhci_trb *trb)
 		xhci_dbg(xhci, "DMA address or buffer contents= %llu\n", address);
 		break;
 	case TRB_TYPE(TRB_COMPLETION):
-		address = trb->event_cmd.cmd_trb[0] +
-			(((u64) trb->event_cmd.cmd_trb[1]) << 32);
+		address = trb->event_cmd.cmd_trb;
 		xhci_dbg(xhci, "Command TRB pointer = %llu\n", address);
 		xhci_dbg(xhci, "Completion status = %u\n",
 				(unsigned int) GET_COMP_CODE(trb->event_cmd.status));
@@ -328,8 +316,8 @@ void xhci_debug_segment(struct xhci_hcd *xhci, struct xhci_segment *seg)
 	for (i = 0; i < TRBS_PER_SEGMENT; ++i) {
 		trb = &seg->trbs[i];
 		xhci_dbg(xhci, "@%08x %08x %08x %08x %08x\n", addr,
-				(unsigned int) trb->link.segment_ptr[0],
-				(unsigned int) trb->link.segment_ptr[1],
+				lower_32_bits(trb->link.segment_ptr),
+				upper_32_bits(trb->link.segment_ptr),
 				(unsigned int) trb->link.intr_target,
 				(unsigned int) trb->link.control);
 		addr += sizeof(*trb);
@@ -386,8 +374,8 @@ void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst)
 		entry = &erst->entries[i];
 		xhci_dbg(xhci, "@%08x %08x %08x %08x %08x\n",
 				(unsigned int) addr,
-				(unsigned int) entry->seg_addr[0],
-				(unsigned int) entry->seg_addr[1],
+				lower_32_bits(entry->seg_addr),
+				upper_32_bits(entry->seg_addr),
 				(unsigned int) entry->seg_size,
 				(unsigned int) entry->rsvd);
 		addr += sizeof(*entry);
@@ -396,90 +384,147 @@ void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst)
 
 void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci)
 {
-	u32 val;
+	u64 val;
 
-	val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[0]);
-	xhci_dbg(xhci, "// xHC command ring deq ptr low bits + flags = 0x%x\n", val);
-	val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[1]);
-	xhci_dbg(xhci, "// xHC command ring deq ptr high bits = 0x%x\n", val);
+	val = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+	xhci_dbg(xhci, "// xHC command ring deq ptr low bits + flags = @%08x\n",
+			lower_32_bits(val));
+	xhci_dbg(xhci, "// xHC command ring deq ptr high bits = @%08x\n",
+			upper_32_bits(val));
 }
 
-void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_addr_t dma, unsigned int last_ep)
+/* Print the last 32 bytes for 64-byte contexts */
+static void dbg_rsvd64(struct xhci_hcd *xhci, u64 *ctx, dma_addr_t dma)
+{
+	int i;
+	for (i = 0; i < 4; ++i) {
+		xhci_dbg(xhci, "@%p (virt) @%08llx "
+			 "(dma) %#08llx - rsvd64[%d]\n",
+			 &ctx[4 + i], (unsigned long long)dma,
+			 ctx[4 + i], i);
+		dma += 8;
+	}
+}
+
+void xhci_dbg_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx)
 {
-	int i, j;
-	int last_ep_ctx = 31;
 	/* Fields are 32 bits wide, DMA addresses are in bytes */
 	int field_size = 32 / 8;
+	int i;
 
-	xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - drop flags\n",
-			&ctx->drop_flags, (unsigned long long)dma,
-			ctx->drop_flags);
-	dma += field_size;
-	xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - add flags\n",
-			&ctx->add_flags, (unsigned long long)dma,
-			ctx->add_flags);
-	dma += field_size;
-	for (i = 0; i > 6; ++i) {
-		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
-				&ctx->rsvd[i], (unsigned long long)dma,
-				ctx->rsvd[i], i);
-		dma += field_size;
-	}
+	struct xhci_slot_ctx *slot_ctx = xhci_get_slot_ctx(xhci, ctx);
+	dma_addr_t dma = ctx->dma + ((unsigned long)slot_ctx - (unsigned long)ctx);
+	int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
 
 	xhci_dbg(xhci, "Slot Context:\n");
 	xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info\n",
-			&ctx->slot.dev_info,
-			(unsigned long long)dma, ctx->slot.dev_info);
+			&slot_ctx->dev_info,
+			(unsigned long long)dma, slot_ctx->dev_info);
 	dma += field_size;
 	xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_info2\n",
-			&ctx->slot.dev_info2,
-			(unsigned long long)dma, ctx->slot.dev_info2);
+			&slot_ctx->dev_info2,
+			(unsigned long long)dma, slot_ctx->dev_info2);
 	dma += field_size;
 	xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - tt_info\n",
-			&ctx->slot.tt_info,
-			(unsigned long long)dma, ctx->slot.tt_info);
+			&slot_ctx->tt_info,
+			(unsigned long long)dma, slot_ctx->tt_info);
 	dma += field_size;
 	xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - dev_state\n",
-			&ctx->slot.dev_state,
-			(unsigned long long)dma, ctx->slot.dev_state);
+			&slot_ctx->dev_state,
+			(unsigned long long)dma, slot_ctx->dev_state);
 	dma += field_size;
-	for (i = 0; i > 4; ++i) {
+	for (i = 0; i < 4; ++i) {
 		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
-				&ctx->slot.reserved[i], (unsigned long long)dma,
-				ctx->slot.reserved[i], i);
+				&slot_ctx->reserved[i], (unsigned long long)dma,
+				slot_ctx->reserved[i], i);
 		dma += field_size;
 	}
 
+	if (csz)
+		dbg_rsvd64(xhci, (u64 *)slot_ctx, dma);
+}
+
+void xhci_dbg_ep_ctx(struct xhci_hcd *xhci,
+		     struct xhci_container_ctx *ctx,
+		     unsigned int last_ep)
+{
+	int i, j;
+	int last_ep_ctx = 31;
+	/* Fields are 32 bits wide, DMA addresses are in bytes */
+	int field_size = 32 / 8;
+	int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
+
 	if (last_ep < 31)
 		last_ep_ctx = last_ep + 1;
 	for (i = 0; i < last_ep_ctx; ++i) {
+		struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, ctx, i);
+		dma_addr_t dma = ctx->dma +
+			((unsigned long)ep_ctx - (unsigned long)ctx);
+
 		xhci_dbg(xhci, "Endpoint %02d Context:\n", i);
 		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info\n",
-				&ctx->ep[i].ep_info,
-				(unsigned long long)dma, ctx->ep[i].ep_info);
+				&ep_ctx->ep_info,
+				(unsigned long long)dma, ep_ctx->ep_info);
 		dma += field_size;
 		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - ep_info2\n",
-				&ctx->ep[i].ep_info2,
-				(unsigned long long)dma, ctx->ep[i].ep_info2);
-		dma += field_size;
-		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - deq[0]\n",
-				&ctx->ep[i].deq[0],
-				(unsigned long long)dma, ctx->ep[i].deq[0]);
-		dma += field_size;
-		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - deq[1]\n",
-				&ctx->ep[i].deq[1],
-				(unsigned long long)dma, ctx->ep[i].deq[1]);
+				&ep_ctx->ep_info2,
+				(unsigned long long)dma, ep_ctx->ep_info2);
 		dma += field_size;
+		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08llx - deq\n",
+				&ep_ctx->deq,
+				(unsigned long long)dma, ep_ctx->deq);
+		dma += 2*field_size;
 		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - tx_info\n",
-				&ctx->ep[i].tx_info,
-				(unsigned long long)dma, ctx->ep[i].tx_info);
+				&ep_ctx->tx_info,
+				(unsigned long long)dma, ep_ctx->tx_info);
 		dma += field_size;
 		for (j = 0; j < 3; ++j) {
 			xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd[%d]\n",
-					&ctx->ep[i].reserved[j],
+					&ep_ctx->reserved[j],
 					(unsigned long long)dma,
-					ctx->ep[i].reserved[j], j);
+					ep_ctx->reserved[j], j);
+			dma += field_size;
+		}
+
+		if (csz)
+			dbg_rsvd64(xhci, (u64 *)ep_ctx, dma);
+	}
+}
+
+void xhci_dbg_ctx(struct xhci_hcd *xhci,
+		  struct xhci_container_ctx *ctx,
+		  unsigned int last_ep)
+{
+	int i;
+	/* Fields are 32 bits wide, DMA addresses are in bytes */
+	int field_size = 32 / 8;
+	struct xhci_slot_ctx *slot_ctx;
+	dma_addr_t dma = ctx->dma;
+	int csz = HCC_64BYTE_CONTEXT(xhci->hcc_params);
+
+	if (ctx->type == XHCI_CTX_TYPE_INPUT) {
+		struct xhci_input_control_ctx *ctrl_ctx =
+			xhci_get_input_control_ctx(xhci, ctx);
+		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - drop flags\n",
+			 &ctrl_ctx->drop_flags, (unsigned long long)dma,
+			 ctrl_ctx->drop_flags);
+		dma += field_size;
+		xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - add flags\n",
+			 &ctrl_ctx->add_flags, (unsigned long long)dma,
+			 ctrl_ctx->add_flags);
+		dma += field_size;
+		for (i = 0; i < 6; ++i) {
+			xhci_dbg(xhci, "@%p (virt) @%08llx (dma) %#08x - rsvd2[%d]\n",
+				 &ctrl_ctx->rsvd2[i], (unsigned long long)dma,
+				 ctrl_ctx->rsvd2[i], i);
 			dma += field_size;
 		}
+
+		if (csz)
+			dbg_rsvd64(xhci, (u64 *)ctrl_ctx, dma);
 	}
+
+	slot_ctx = xhci_get_slot_ctx(xhci, ctx);
+	xhci_dbg_slot_ctx(xhci, ctx);
+	xhci_dbg_ep_ctx(xhci, ctx, last_ep);
 }
diff --git a/drivers/usb/host/xhci-hcd.c b/drivers/usb/host/xhci-hcd.c
index dba3e07..816c39c 100644
--- a/drivers/usb/host/xhci-hcd.c
+++ b/drivers/usb/host/xhci-hcd.c
@@ -103,7 +103,10 @@ int xhci_reset(struct xhci_hcd *xhci)
 	u32 state;
 
 	state = xhci_readl(xhci, &xhci->op_regs->status);
-	BUG_ON((state & STS_HALT) == 0);
+	if ((state & STS_HALT) == 0) {
+		xhci_warn(xhci, "Host controller not halted, aborting reset.\n");
+		return 0;
+	}
 
 	xhci_dbg(xhci, "// Reset the HC\n");
 	command = xhci_readl(xhci, &xhci->op_regs->command);
@@ -226,6 +229,7 @@ int xhci_init(struct usb_hcd *hcd)
 static void xhci_work(struct xhci_hcd *xhci)
 {
 	u32 temp;
+	u64 temp_64;
 
 	/*
 	 * Clear the op reg interrupt status first,
@@ -248,9 +252,9 @@ static void xhci_work(struct xhci_hcd *xhci)
 	/* FIXME this should be a delayed service routine that clears the EHB */
 	xhci_handle_event(xhci);
 
-	/* Clear the event handler busy flag; the event ring should be empty. */
-	temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
-	xhci_writel(xhci, temp & ~ERST_EHB, &xhci->ir_set->erst_dequeue[0]);
+	/* Clear the event handler busy flag (RW1C); the event ring should be empty. */
+	temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+	xhci_write_64(xhci, temp_64 | ERST_EHB, &xhci->ir_set->erst_dequeue);
 	/* Flush posted writes -- FIXME is this necessary? */
 	xhci_readl(xhci, &xhci->ir_set->irq_pending);
 }
@@ -266,19 +270,34 @@ irqreturn_t xhci_irq(struct usb_hcd *hcd)
 {
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 	u32 temp, temp2;
+	union xhci_trb *trb;
 
 	spin_lock(&xhci->lock);
+	trb = xhci->event_ring->dequeue;
 	/* Check if the xHC generated the interrupt, or the irq is shared */
 	temp = xhci_readl(xhci, &xhci->op_regs->status);
 	temp2 = xhci_readl(xhci, &xhci->ir_set->irq_pending);
+	if (temp == 0xffffffff && temp2 == 0xffffffff)
+		goto hw_died;
+
 	if (!(temp & STS_EINT) && !ER_IRQ_PENDING(temp2)) {
 		spin_unlock(&xhci->lock);
 		return IRQ_NONE;
 	}
+	xhci_dbg(xhci, "op reg status = %08x\n", temp);
+	xhci_dbg(xhci, "ir set irq_pending = %08x\n", temp2);
+	xhci_dbg(xhci, "Event ring dequeue ptr:\n");
+	xhci_dbg(xhci, "@%llx %08x %08x %08x %08x\n",
+			(unsigned long long)xhci_trb_virt_to_dma(xhci->event_ring->deq_seg, trb),
+			lower_32_bits(trb->link.segment_ptr),
+			upper_32_bits(trb->link.segment_ptr),
+			(unsigned int) trb->link.intr_target,
+			(unsigned int) trb->link.control);
 
 	if (temp & STS_FATAL) {
 		xhci_warn(xhci, "WARNING: Host System Error\n");
 		xhci_halt(xhci);
+hw_died:
 		xhci_to_hcd(xhci)->state = HC_STATE_HALT;
 		spin_unlock(&xhci->lock);
 		return -ESHUTDOWN;
@@ -295,6 +314,7 @@ void xhci_event_ring_work(unsigned long arg)
 {
 	unsigned long flags;
 	int temp;
+	u64 temp_64;
 	struct xhci_hcd *xhci = (struct xhci_hcd *) arg;
 	int i, j;
 
@@ -311,9 +331,9 @@ void xhci_event_ring_work(unsigned long arg)
 	xhci_dbg(xhci, "Event ring:\n");
 	xhci_debug_segment(xhci, xhci->event_ring->deq_seg);
 	xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
-	temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
-	temp &= ERST_PTR_MASK;
-	xhci_dbg(xhci, "ERST deq = 0x%x\n", temp);
+	temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+	temp_64 &= ~ERST_PTR_MASK;
+	xhci_dbg(xhci, "ERST deq = 64'h%0lx\n", (long unsigned int) temp_64);
 	xhci_dbg(xhci, "Command ring:\n");
 	xhci_debug_segment(xhci, xhci->cmd_ring->deq_seg);
 	xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
@@ -356,6 +376,7 @@ void xhci_event_ring_work(unsigned long arg)
 int xhci_run(struct usb_hcd *hcd)
 {
 	u32 temp;
+	u64 temp_64;
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
 	void (*doorbell)(struct xhci_hcd *) = NULL;
 
@@ -382,6 +403,20 @@ int xhci_run(struct usb_hcd *hcd)
 	add_timer(&xhci->event_ring_timer);
 #endif
 
+	xhci_dbg(xhci, "Command ring memory map follows:\n");
+	xhci_debug_ring(xhci, xhci->cmd_ring);
+	xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
+	xhci_dbg_cmd_ptrs(xhci);
+
+	xhci_dbg(xhci, "ERST memory map follows:\n");
+	xhci_dbg_erst(xhci, &xhci->erst);
+	xhci_dbg(xhci, "Event ring:\n");
+	xhci_debug_ring(xhci, xhci->event_ring);
+	xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
+	temp_64 = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
+	temp_64 &= ~ERST_PTR_MASK;
+	xhci_dbg(xhci, "ERST deq = 64'h%0lx\n", (long unsigned int) temp_64);
+
 	xhci_dbg(xhci, "// Set the interrupt modulation register\n");
 	temp = xhci_readl(xhci, &xhci->ir_set->irq_control);
 	temp &= ~ER_IRQ_INTERVAL_MASK;
@@ -406,22 +441,6 @@ int xhci_run(struct usb_hcd *hcd)
 	if (NUM_TEST_NOOPS > 0)
 		doorbell = xhci_setup_one_noop(xhci);
 
-	xhci_dbg(xhci, "Command ring memory map follows:\n");
-	xhci_debug_ring(xhci, xhci->cmd_ring);
-	xhci_dbg_ring_ptrs(xhci, xhci->cmd_ring);
-	xhci_dbg_cmd_ptrs(xhci);
-
-	xhci_dbg(xhci, "ERST memory map follows:\n");
-	xhci_dbg_erst(xhci, &xhci->erst);
-	xhci_dbg(xhci, "Event ring:\n");
-	xhci_debug_ring(xhci, xhci->event_ring);
-	xhci_dbg_ring_ptrs(xhci, xhci->event_ring);
-	temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
-	temp &= ERST_PTR_MASK;
-	xhci_dbg(xhci, "ERST deq = 0x%x\n", temp);
-	temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[1]);
-	xhci_dbg(xhci, "ERST deq upper = 0x%x\n", temp);
-
 	temp = xhci_readl(xhci, &xhci->op_regs->command);
 	temp |= (CMD_RUN);
 	xhci_dbg(xhci, "// Turn on HC, cmd = 0x%x.\n",
@@ -601,10 +620,13 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags)
 		goto exit;
 	}
 	if (usb_endpoint_xfer_control(&urb->ep->desc))
-		ret = xhci_queue_ctrl_tx(xhci, mem_flags, urb,
+		/* We have a spinlock and interrupts disabled, so we must pass
+		 * atomic context to this function, which may allocate memory.
+		 */
+		ret = xhci_queue_ctrl_tx(xhci, GFP_ATOMIC, urb,
 				slot_id, ep_index);
 	else if (usb_endpoint_xfer_bulk(&urb->ep->desc))
-		ret = xhci_queue_bulk_tx(xhci, mem_flags, urb,
+		ret = xhci_queue_bulk_tx(xhci, GFP_ATOMIC, urb,
 				slot_id, ep_index);
 	else
 		ret = -EINVAL;
@@ -661,8 +683,12 @@ int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status)
 		goto done;
 
 	xhci_dbg(xhci, "Cancel URB %p\n", urb);
+	xhci_dbg(xhci, "Event ring:\n");
+	xhci_debug_ring(xhci, xhci->event_ring);
 	ep_index = xhci_get_endpoint_index(&urb->ep->desc);
 	ep_ring = xhci->devs[urb->dev->slot_id]->ep_rings[ep_index];
+	xhci_dbg(xhci, "Endpoint ring:\n");
+	xhci_debug_ring(xhci, ep_ring);
 	td = (struct xhci_td *) urb->hcpriv;
 
 	ep_ring->cancels_pending++;
@@ -696,7 +722,9 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 		struct usb_host_endpoint *ep)
 {
 	struct xhci_hcd *xhci;
-	struct xhci_device_control *in_ctx;
+	struct xhci_container_ctx *in_ctx, *out_ctx;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_slot_ctx *slot_ctx;
 	unsigned int last_ctx;
 	unsigned int ep_index;
 	struct xhci_ep_ctx *ep_ctx;
@@ -724,31 +752,34 @@ int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 	}
 
 	in_ctx = xhci->devs[udev->slot_id]->in_ctx;
+	out_ctx = xhci->devs[udev->slot_id]->out_ctx;
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
 	ep_index = xhci_get_endpoint_index(&ep->desc);
-	ep_ctx = &xhci->devs[udev->slot_id]->out_ctx->ep[ep_index];
+	ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
 	/* If the HC already knows the endpoint is disabled,
 	 * or the HCD has noted it is disabled, ignore this request
 	 */
 	if ((ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED ||
-			in_ctx->drop_flags & xhci_get_endpoint_flag(&ep->desc)) {
+			ctrl_ctx->drop_flags & xhci_get_endpoint_flag(&ep->desc)) {
 		xhci_warn(xhci, "xHCI %s called with disabled ep %p\n",
 				__func__, ep);
 		return 0;
 	}
 
-	in_ctx->drop_flags |= drop_flag;
-	new_drop_flags = in_ctx->drop_flags;
+	ctrl_ctx->drop_flags |= drop_flag;
+	new_drop_flags = ctrl_ctx->drop_flags;
 
-	in_ctx->add_flags = ~drop_flag;
-	new_add_flags = in_ctx->add_flags;
+	ctrl_ctx->add_flags = ~drop_flag;
+	new_add_flags = ctrl_ctx->add_flags;
 
-	last_ctx = xhci_last_valid_endpoint(in_ctx->add_flags);
+	last_ctx = xhci_last_valid_endpoint(ctrl_ctx->add_flags);
+	slot_ctx = xhci_get_slot_ctx(xhci, in_ctx);
 	/* Update the last valid endpoint context, if we deleted the last one */
-	if ((in_ctx->slot.dev_info & LAST_CTX_MASK) > LAST_CTX(last_ctx)) {
-		in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
-		in_ctx->slot.dev_info |= LAST_CTX(last_ctx);
+	if ((slot_ctx->dev_info & LAST_CTX_MASK) > LAST_CTX(last_ctx)) {
+		slot_ctx->dev_info &= ~LAST_CTX_MASK;
+		slot_ctx->dev_info |= LAST_CTX(last_ctx);
 	}
-	new_slot_info = in_ctx->slot.dev_info;
+	new_slot_info = slot_ctx->dev_info;
 
 	xhci_endpoint_zero(xhci, xhci->devs[udev->slot_id], ep);
 
@@ -778,17 +809,22 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 		struct usb_host_endpoint *ep)
 {
 	struct xhci_hcd *xhci;
-	struct xhci_device_control *in_ctx;
+	struct xhci_container_ctx *in_ctx, *out_ctx;
 	unsigned int ep_index;
 	struct xhci_ep_ctx *ep_ctx;
+	struct xhci_slot_ctx *slot_ctx;
+	struct xhci_input_control_ctx *ctrl_ctx;
 	u32 added_ctxs;
 	unsigned int last_ctx;
 	u32 new_add_flags, new_drop_flags, new_slot_info;
 	int ret = 0;
 
 	ret = xhci_check_args(hcd, udev, ep, 1, __func__);
-	if (ret <= 0)
+	if (ret <= 0) {
+		/* So we won't queue a reset ep command for a root hub */
+		ep->hcpriv = NULL;
 		return ret;
+	}
 	xhci = hcd_to_xhci(hcd);
 
 	added_ctxs = xhci_get_endpoint_flag(&ep->desc);
@@ -810,12 +846,14 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 	}
 
 	in_ctx = xhci->devs[udev->slot_id]->in_ctx;
+	out_ctx = xhci->devs[udev->slot_id]->out_ctx;
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, in_ctx);
 	ep_index = xhci_get_endpoint_index(&ep->desc);
-	ep_ctx = &xhci->devs[udev->slot_id]->out_ctx->ep[ep_index];
+	ep_ctx = xhci_get_ep_ctx(xhci, out_ctx, ep_index);
 	/* If the HCD has already noted the endpoint is enabled,
 	 * ignore this request.
 	 */
-	if (in_ctx->add_flags & xhci_get_endpoint_flag(&ep->desc)) {
+	if (ctrl_ctx->add_flags & xhci_get_endpoint_flag(&ep->desc)) {
 		xhci_warn(xhci, "xHCI %s called with enabled ep %p\n",
 				__func__, ep);
 		return 0;
@@ -833,8 +871,8 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 		return -ENOMEM;
 	}
 
-	in_ctx->add_flags |= added_ctxs;
-	new_add_flags = in_ctx->add_flags;
+	ctrl_ctx->add_flags |= added_ctxs;
+	new_add_flags = ctrl_ctx->add_flags;
 
 	/* If xhci_endpoint_disable() was called for this endpoint, but the
 	 * xHC hasn't been notified yet through the check_bandwidth() call,
@@ -842,14 +880,18 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 	 * descriptors.  We must drop and re-add this endpoint, so we leave the
 	 * drop flags alone.
 	 */
-	new_drop_flags = in_ctx->drop_flags;
+	new_drop_flags = ctrl_ctx->drop_flags;
 
+	slot_ctx = xhci_get_slot_ctx(xhci, in_ctx);
 	/* Update the last valid endpoint context, if we just added one past */
-	if ((in_ctx->slot.dev_info & LAST_CTX_MASK) < LAST_CTX(last_ctx)) {
-		in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
-		in_ctx->slot.dev_info |= LAST_CTX(last_ctx);
+	if ((slot_ctx->dev_info & LAST_CTX_MASK) < LAST_CTX(last_ctx)) {
+		slot_ctx->dev_info &= ~LAST_CTX_MASK;
+		slot_ctx->dev_info |= LAST_CTX(last_ctx);
 	}
-	new_slot_info = in_ctx->slot.dev_info;
+	new_slot_info = slot_ctx->dev_info;
+
+	/* Store the usb_device pointer for later use */
+	ep->hcpriv = udev;
 
 	xhci_dbg(xhci, "add ep 0x%x, slot id %d, new drop flags = %#x, new add flags = %#x, new slot info = %#x\n",
 			(unsigned int) ep->desc.bEndpointAddress,
@@ -860,9 +902,11 @@ int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev,
 	return 0;
 }
 
-static void xhci_zero_in_ctx(struct xhci_virt_device *virt_dev)
+static void xhci_zero_in_ctx(struct xhci_hcd *xhci, struct xhci_virt_device *virt_dev)
 {
+	struct xhci_input_control_ctx *ctrl_ctx;
 	struct xhci_ep_ctx *ep_ctx;
+	struct xhci_slot_ctx *slot_ctx;
 	int i;
 
 	/* When a device's add flag and drop flag are zero, any subsequent
@@ -870,17 +914,18 @@ static void xhci_zero_in_ctx(struct xhci_virt_device *virt_dev)
 	 * untouched.  Make sure we don't leave any old state in the input
 	 * endpoint contexts.
 	 */
-	virt_dev->in_ctx->drop_flags = 0;
-	virt_dev->in_ctx->add_flags = 0;
-	virt_dev->in_ctx->slot.dev_info &= ~LAST_CTX_MASK;
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+	ctrl_ctx->drop_flags = 0;
+	ctrl_ctx->add_flags = 0;
+	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+	slot_ctx->dev_info &= ~LAST_CTX_MASK;
 	/* Endpoint 0 is always valid */
-	virt_dev->in_ctx->slot.dev_info |= LAST_CTX(1);
+	slot_ctx->dev_info |= LAST_CTX(1);
 	for (i = 1; i < 31; ++i) {
-		ep_ctx = &virt_dev->in_ctx->ep[i];
+		ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, i);
 		ep_ctx->ep_info = 0;
 		ep_ctx->ep_info2 = 0;
-		ep_ctx->deq[0] = 0;
-		ep_ctx->deq[1] = 0;
+		ep_ctx->deq = 0;
 		ep_ctx->tx_info = 0;
 	}
 }
@@ -903,6 +948,8 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 	unsigned long flags;
 	struct xhci_hcd *xhci;
 	struct xhci_virt_device	*virt_dev;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	struct xhci_slot_ctx *slot_ctx;
 
 	ret = xhci_check_args(hcd, udev, NULL, 0, __func__);
 	if (ret <= 0)
@@ -918,16 +965,18 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 	virt_dev = xhci->devs[udev->slot_id];
 
 	/* See section 4.6.6 - A0 = 1; A1 = D0 = D1 = 0 */
-	virt_dev->in_ctx->add_flags |= SLOT_FLAG;
-	virt_dev->in_ctx->add_flags &= ~EP0_FLAG;
-	virt_dev->in_ctx->drop_flags &= ~SLOT_FLAG;
-	virt_dev->in_ctx->drop_flags &= ~EP0_FLAG;
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+	ctrl_ctx->add_flags |= SLOT_FLAG;
+	ctrl_ctx->add_flags &= ~EP0_FLAG;
+	ctrl_ctx->drop_flags &= ~SLOT_FLAG;
+	ctrl_ctx->drop_flags &= ~EP0_FLAG;
 	xhci_dbg(xhci, "New Input Control Context:\n");
-	xhci_dbg_ctx(xhci, virt_dev->in_ctx, virt_dev->in_ctx_dma,
-			LAST_CTX_TO_EP_NUM(virt_dev->in_ctx->slot.dev_info));
+	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->in_ctx);
+	xhci_dbg_ctx(xhci, virt_dev->in_ctx,
+			LAST_CTX_TO_EP_NUM(slot_ctx->dev_info));
 
 	spin_lock_irqsave(&xhci->lock, flags);
-	ret = xhci_queue_configure_endpoint(xhci, virt_dev->in_ctx_dma,
+	ret = xhci_queue_configure_endpoint(xhci, virt_dev->in_ctx->dma,
 			udev->slot_id);
 	if (ret < 0) {
 		spin_unlock_irqrestore(&xhci->lock, flags);
@@ -982,10 +1031,10 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 	}
 
 	xhci_dbg(xhci, "Output context after successful config ep cmd:\n");
-	xhci_dbg_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma,
-			LAST_CTX_TO_EP_NUM(virt_dev->in_ctx->slot.dev_info));
+	xhci_dbg_ctx(xhci, virt_dev->out_ctx,
+			LAST_CTX_TO_EP_NUM(slot_ctx->dev_info));
 
-	xhci_zero_in_ctx(virt_dev);
+	xhci_zero_in_ctx(xhci, virt_dev);
 	/* Free any old rings */
 	for (i = 1; i < 31; ++i) {
 		if (virt_dev->new_ep_rings[i]) {
@@ -1023,7 +1072,67 @@ void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev)
 			virt_dev->new_ep_rings[i] = NULL;
 		}
 	}
-	xhci_zero_in_ctx(virt_dev);
+	xhci_zero_in_ctx(xhci, virt_dev);
+}
+
+/* Deal with stalled endpoints.  The core should have sent the control message
+ * to clear the halt condition.  However, we need to make the xHCI hardware
+ * reset its sequence number, since a device will expect a sequence number of
+ * zero after the halt condition is cleared.
+ * Context: in_interrupt
+ */
+void xhci_endpoint_reset(struct usb_hcd *hcd,
+		struct usb_host_endpoint *ep)
+{
+	struct xhci_hcd *xhci;
+	struct usb_device *udev;
+	unsigned int ep_index;
+	unsigned long flags;
+	int ret;
+	struct xhci_dequeue_state deq_state;
+	struct xhci_ring *ep_ring;
+
+	xhci = hcd_to_xhci(hcd);
+	udev = (struct usb_device *) ep->hcpriv;
+	/* Called with a root hub endpoint (or an endpoint that wasn't added
+	 * with xhci_add_endpoint()
+	 */
+	if (!ep->hcpriv)
+		return;
+	ep_index = xhci_get_endpoint_index(&ep->desc);
+	ep_ring = xhci->devs[udev->slot_id]->ep_rings[ep_index];
+	if (!ep_ring->stopped_td) {
+		xhci_dbg(xhci, "Endpoint 0x%x not halted, refusing to reset.\n",
+				ep->desc.bEndpointAddress);
+		return;
+	}
+
+	xhci_dbg(xhci, "Queueing reset endpoint command\n");
+	spin_lock_irqsave(&xhci->lock, flags);
+	ret = xhci_queue_reset_ep(xhci, udev->slot_id, ep_index);
+	/*
+	 * Can't change the ring dequeue pointer until it's transitioned to the
+	 * stopped state, which is only upon a successful reset endpoint
+	 * command.  Better hope that last command worked!
+	 */
+	if (!ret) {
+		xhci_dbg(xhci, "Cleaning up stalled endpoint ring\n");
+		/* We need to move the HW's dequeue pointer past this TD,
+		 * or it will attempt to resend it on the next doorbell ring.
+		 */
+		xhci_find_new_dequeue_state(xhci, udev->slot_id,
+				ep_index, ep_ring->stopped_td, &deq_state);
+		xhci_dbg(xhci, "Queueing new dequeue state\n");
+		xhci_queue_new_dequeue_state(xhci, ep_ring,
+				udev->slot_id,
+				ep_index, &deq_state);
+		kfree(ep_ring->stopped_td);
+		xhci_ring_cmd_db(xhci);
+	}
+	spin_unlock_irqrestore(&xhci->lock, flags);
+
+	if (ret)
+		xhci_warn(xhci, "FIXME allocate a new ring segment\n");
 }
 
 /*
@@ -1120,7 +1229,9 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	struct xhci_virt_device *virt_dev;
 	int ret = 0;
 	struct xhci_hcd *xhci = hcd_to_xhci(hcd);
-	u32 temp;
+	struct xhci_slot_ctx *slot_ctx;
+	struct xhci_input_control_ctx *ctrl_ctx;
+	u64 temp_64;
 
 	if (!udev->slot_id) {
 		xhci_dbg(xhci, "Bad Slot ID %d\n", udev->slot_id);
@@ -1133,10 +1244,12 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	if (!udev->config)
 		xhci_setup_addressable_virt_dev(xhci, udev);
 	/* Otherwise, assume the core has the device configured how it wants */
+	xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
+	xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
 
 	spin_lock_irqsave(&xhci->lock, flags);
-	ret = xhci_queue_address_device(xhci, virt_dev->in_ctx_dma,
-			udev->slot_id);
+	ret = xhci_queue_address_device(xhci, virt_dev->in_ctx->dma,
+					udev->slot_id);
 	if (ret) {
 		spin_unlock_irqrestore(&xhci->lock, flags);
 		xhci_dbg(xhci, "FIXME: allocate a command ring segment\n");
@@ -1176,41 +1289,37 @@ int xhci_address_device(struct usb_hcd *hcd, struct usb_device *udev)
 	default:
 		xhci_err(xhci, "ERROR: unexpected command completion "
 				"code 0x%x.\n", virt_dev->cmd_status);
+		xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id);
+		xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2);
 		ret = -EINVAL;
 		break;
 	}
 	if (ret) {
 		return ret;
 	}
-	temp = xhci_readl(xhci, &xhci->op_regs->dcbaa_ptr[0]);
-	xhci_dbg(xhci, "Op regs DCBAA ptr[0] = %#08x\n", temp);
-	temp = xhci_readl(xhci, &xhci->op_regs->dcbaa_ptr[1]);
-	xhci_dbg(xhci, "Op regs DCBAA ptr[1] = %#08x\n", temp);
-	xhci_dbg(xhci, "Slot ID %d dcbaa entry[0] @%p = %#08x\n",
-			udev->slot_id,
-			&xhci->dcbaa->dev_context_ptrs[2*udev->slot_id],
-			xhci->dcbaa->dev_context_ptrs[2*udev->slot_id]);
-	xhci_dbg(xhci, "Slot ID %d dcbaa entry[1] @%p = %#08x\n",
+	temp_64 = xhci_read_64(xhci, &xhci->op_regs->dcbaa_ptr);
+	xhci_dbg(xhci, "Op regs DCBAA ptr = %#016llx\n", temp_64);
+	xhci_dbg(xhci, "Slot ID %d dcbaa entry @%p = %#016llx\n",
 			udev->slot_id,
-			&xhci->dcbaa->dev_context_ptrs[2*udev->slot_id+1],
-			xhci->dcbaa->dev_context_ptrs[2*udev->slot_id+1]);
+			&xhci->dcbaa->dev_context_ptrs[udev->slot_id],
+			(unsigned long long)
+				xhci->dcbaa->dev_context_ptrs[udev->slot_id]);
 	xhci_dbg(xhci, "Output Context DMA address = %#08llx\n",
-			(unsigned long long)virt_dev->out_ctx_dma);
+			(unsigned long long)virt_dev->out_ctx->dma);
 	xhci_dbg(xhci, "Slot ID %d Input Context:\n", udev->slot_id);
-	xhci_dbg_ctx(xhci, virt_dev->in_ctx, virt_dev->in_ctx_dma, 2);
+	xhci_dbg_ctx(xhci, virt_dev->in_ctx, 2);
 	xhci_dbg(xhci, "Slot ID %d Output Context:\n", udev->slot_id);
-	xhci_dbg_ctx(xhci, virt_dev->out_ctx, virt_dev->out_ctx_dma, 2);
+	xhci_dbg_ctx(xhci, virt_dev->out_ctx, 2);
 	/*
 	 * USB core uses address 1 for the roothubs, so we add one to the
 	 * address given back to us by the HC.
 	 */
-	udev->devnum = (virt_dev->out_ctx->slot.dev_state & DEV_ADDR_MASK) + 1;
+	slot_ctx = xhci_get_slot_ctx(xhci, virt_dev->out_ctx);
+	udev->devnum = (slot_ctx->dev_state & DEV_ADDR_MASK) + 1;
 	/* Zero the input context control for later use */
-	virt_dev->in_ctx->add_flags = 0;
-	virt_dev->in_ctx->drop_flags = 0;
-	/* Mirror flags in the output context for future ep enable/disable */
-	virt_dev->out_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
-	virt_dev->out_ctx->drop_flags = 0;
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, virt_dev->in_ctx);
+	ctrl_ctx->add_flags = 0;
+	ctrl_ctx->drop_flags = 0;
 
 	xhci_dbg(xhci, "Device address = %d\n", udev->devnum);
 	/* XXX Meh, not sure if anyone else but choose_address uses this. */
@@ -1252,7 +1361,6 @@ static int __init xhci_hcd_init(void)
 	/* xhci_device_control has eight fields, and also
 	 * embeds one xhci_slot_ctx and 31 xhci_ep_ctx
 	 */
-	BUILD_BUG_ON(sizeof(struct xhci_device_control) != (8+8+8*31)*32/8);
 	BUILD_BUG_ON(sizeof(struct xhci_stream_ctx) != 4*32/8);
 	BUILD_BUG_ON(sizeof(union xhci_trb) != 4*32/8);
 	BUILD_BUG_ON(sizeof(struct xhci_erst_entry) != 4*32/8);
diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c
index c8a72de..e6b9a1c 100644
--- a/drivers/usb/host/xhci-mem.c
+++ b/drivers/usb/host/xhci-mem.c
@@ -88,7 +88,7 @@ static void xhci_link_segments(struct xhci_hcd *xhci, struct xhci_segment *prev,
 		return;
 	prev->next = next;
 	if (link_trbs) {
-		prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr[0] = next->dma;
+		prev->trbs[TRBS_PER_SEGMENT-1].link.segment_ptr = next->dma;
 
 		/* Set the last TRB in the segment to have a TRB type ID of Link TRB */
 		val = prev->trbs[TRBS_PER_SEGMENT-1].link.control;
@@ -189,6 +189,63 @@ fail:
 	return 0;
 }
 
+#define CTX_SIZE(_hcc) (HCC_64BYTE_CONTEXT(_hcc) ? 64 : 32)
+
+struct xhci_container_ctx *xhci_alloc_container_ctx(struct xhci_hcd *xhci,
+						    int type, gfp_t flags)
+{
+	struct xhci_container_ctx *ctx = kzalloc(sizeof(*ctx), flags);
+	if (!ctx)
+		return NULL;
+
+	BUG_ON((type != XHCI_CTX_TYPE_DEVICE) && (type != XHCI_CTX_TYPE_INPUT));
+	ctx->type = type;
+	ctx->size = HCC_64BYTE_CONTEXT(xhci->hcc_params) ? 2048 : 1024;
+	if (type == XHCI_CTX_TYPE_INPUT)
+		ctx->size += CTX_SIZE(xhci->hcc_params);
+
+	ctx->bytes = dma_pool_alloc(xhci->device_pool, flags, &ctx->dma);
+	memset(ctx->bytes, 0, ctx->size);
+	return ctx;
+}
+
+void xhci_free_container_ctx(struct xhci_hcd *xhci,
+			     struct xhci_container_ctx *ctx)
+{
+	dma_pool_free(xhci->device_pool, ctx->bytes, ctx->dma);
+	kfree(ctx);
+}
+
+struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci,
+					      struct xhci_container_ctx *ctx)
+{
+	BUG_ON(ctx->type != XHCI_CTX_TYPE_INPUT);
+	return (struct xhci_input_control_ctx *)ctx->bytes;
+}
+
+struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci,
+					struct xhci_container_ctx *ctx)
+{
+	if (ctx->type == XHCI_CTX_TYPE_DEVICE)
+		return (struct xhci_slot_ctx *)ctx->bytes;
+
+	return (struct xhci_slot_ctx *)
+		(ctx->bytes + CTX_SIZE(xhci->hcc_params));
+}
+
+struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci,
+				    struct xhci_container_ctx *ctx,
+				    unsigned int ep_index)
+{
+	/* increment ep index by offset of start of ep ctx array */
+	ep_index++;
+	if (ctx->type == XHCI_CTX_TYPE_INPUT)
+		ep_index++;
+
+	return (struct xhci_ep_ctx *)
+		(ctx->bytes + (ep_index * CTX_SIZE(xhci->hcc_params)));
+}
+
 /* All the xhci_tds in the ring's TD list should be freed at this point */
 void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
 {
@@ -200,8 +257,7 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
 		return;
 
 	dev = xhci->devs[slot_id];
-	xhci->dcbaa->dev_context_ptrs[2*slot_id] = 0;
-	xhci->dcbaa->dev_context_ptrs[2*slot_id + 1] = 0;
+	xhci->dcbaa->dev_context_ptrs[slot_id] = 0;
 	if (!dev)
 		return;
 
@@ -210,11 +266,10 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
 			xhci_ring_free(xhci, dev->ep_rings[i]);
 
 	if (dev->in_ctx)
-		dma_pool_free(xhci->device_pool,
-				dev->in_ctx, dev->in_ctx_dma);
+		xhci_free_container_ctx(xhci, dev->in_ctx);
 	if (dev->out_ctx)
-		dma_pool_free(xhci->device_pool,
-				dev->out_ctx, dev->out_ctx_dma);
+		xhci_free_container_ctx(xhci, dev->out_ctx);
+
 	kfree(xhci->devs[slot_id]);
 	xhci->devs[slot_id] = 0;
 }
@@ -222,7 +277,6 @@ void xhci_free_virt_device(struct xhci_hcd *xhci, int slot_id)
 int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
 		struct usb_device *udev, gfp_t flags)
 {
-	dma_addr_t	dma;
 	struct xhci_virt_device *dev;
 
 	/* Slot ID 0 is reserved */
@@ -236,23 +290,21 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
 		return 0;
 	dev = xhci->devs[slot_id];
 
-	/* Allocate the (output) device context that will be used in the HC */
-	dev->out_ctx = dma_pool_alloc(xhci->device_pool, flags, &dma);
+	/* Allocate the (output) device context that will be used in the HC. */
+	dev->out_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_DEVICE, flags);
 	if (!dev->out_ctx)
 		goto fail;
-	dev->out_ctx_dma = dma;
+
 	xhci_dbg(xhci, "Slot %d output ctx = 0x%llx (dma)\n", slot_id,
-			(unsigned long long)dma);
-	memset(dev->out_ctx, 0, sizeof(*dev->out_ctx));
+			(unsigned long long)dev->out_ctx->dma);
 
 	/* Allocate the (input) device context for address device command */
-	dev->in_ctx = dma_pool_alloc(xhci->device_pool, flags, &dma);
+	dev->in_ctx = xhci_alloc_container_ctx(xhci, XHCI_CTX_TYPE_INPUT, flags);
 	if (!dev->in_ctx)
 		goto fail;
-	dev->in_ctx_dma = dma;
+
 	xhci_dbg(xhci, "Slot %d input ctx = 0x%llx (dma)\n", slot_id,
-			(unsigned long long)dma);
-	memset(dev->in_ctx, 0, sizeof(*dev->in_ctx));
+			(unsigned long long)dev->in_ctx->dma);
 
 	/* Allocate endpoint 0 ring */
 	dev->ep_rings[0] = xhci_ring_alloc(xhci, 1, true, flags);
@@ -261,17 +313,12 @@ int xhci_alloc_virt_device(struct xhci_hcd *xhci, int slot_id,
 
 	init_completion(&dev->cmd_completion);
 
-	/*
-	 * Point to output device context in dcbaa; skip the output control
-	 * context, which is eight 32 bit fields (or 32 bytes long)
-	 */
-	xhci->dcbaa->dev_context_ptrs[2*slot_id] =
-		(u32) dev->out_ctx_dma + (32);
+	/* Point to output device context in dcbaa. */
+	xhci->dcbaa->dev_context_ptrs[slot_id] = dev->out_ctx->dma;
 	xhci_dbg(xhci, "Set slot id %d dcbaa entry %p to 0x%llx\n",
 			slot_id,
-			&xhci->dcbaa->dev_context_ptrs[2*slot_id],
-			(unsigned long long)dev->out_ctx_dma);
-	xhci->dcbaa->dev_context_ptrs[2*slot_id + 1] = 0;
+			&xhci->dcbaa->dev_context_ptrs[slot_id],
+			(unsigned long long) xhci->dcbaa->dev_context_ptrs[slot_id]);
 
 	return 1;
 fail:
@@ -285,6 +332,8 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	struct xhci_virt_device *dev;
 	struct xhci_ep_ctx	*ep0_ctx;
 	struct usb_device	*top_dev;
+	struct xhci_slot_ctx    *slot_ctx;
+	struct xhci_input_control_ctx *ctrl_ctx;
 
 	dev = xhci->devs[udev->slot_id];
 	/* Slot ID 0 is reserved */
@@ -293,27 +342,29 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 				udev->slot_id);
 		return -EINVAL;
 	}
-	ep0_ctx = &dev->in_ctx->ep[0];
+	ep0_ctx = xhci_get_ep_ctx(xhci, dev->in_ctx, 0);
+	ctrl_ctx = xhci_get_input_control_ctx(xhci, dev->in_ctx);
+	slot_ctx = xhci_get_slot_ctx(xhci, dev->in_ctx);
 
 	/* 2) New slot context and endpoint 0 context are valid*/
-	dev->in_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
+	ctrl_ctx->add_flags = SLOT_FLAG | EP0_FLAG;
 
 	/* 3) Only the control endpoint is valid - one endpoint context */
-	dev->in_ctx->slot.dev_info |= LAST_CTX(1);
+	slot_ctx->dev_info |= LAST_CTX(1);
 
 	switch (udev->speed) {
 	case USB_SPEED_SUPER:
-		dev->in_ctx->slot.dev_info |= (u32) udev->route;
-		dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_SS;
+		slot_ctx->dev_info |= (u32) udev->route;
+		slot_ctx->dev_info |= (u32) SLOT_SPEED_SS;
 		break;
 	case USB_SPEED_HIGH:
-		dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_HS;
+		slot_ctx->dev_info |= (u32) SLOT_SPEED_HS;
 		break;
 	case USB_SPEED_FULL:
-		dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_FS;
+		slot_ctx->dev_info |= (u32) SLOT_SPEED_FS;
 		break;
 	case USB_SPEED_LOW:
-		dev->in_ctx->slot.dev_info |= (u32) SLOT_SPEED_LS;
+		slot_ctx->dev_info |= (u32) SLOT_SPEED_LS;
 		break;
 	case USB_SPEED_VARIABLE:
 		xhci_dbg(xhci, "FIXME xHCI doesn't support wireless speeds\n");
@@ -327,7 +378,7 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	for (top_dev = udev; top_dev->parent && top_dev->parent->parent;
 			top_dev = top_dev->parent)
 		/* Found device below root hub */;
-	dev->in_ctx->slot.dev_info2 |= (u32) ROOT_HUB_PORT(top_dev->portnum);
+	slot_ctx->dev_info2 |= (u32) ROOT_HUB_PORT(top_dev->portnum);
 	xhci_dbg(xhci, "Set root hub portnum to %d\n", top_dev->portnum);
 
 	/* Is this a LS/FS device under a HS hub? */
@@ -337,8 +388,8 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	 */
 	if ((udev->speed == USB_SPEED_LOW || udev->speed == USB_SPEED_FULL) &&
 			udev->tt) {
-		dev->in_ctx->slot.tt_info = udev->tt->hub->slot_id;
-		dev->in_ctx->slot.tt_info |= udev->ttport << 8;
+		slot_ctx->tt_info = udev->tt->hub->slot_id;
+		slot_ctx->tt_info |= udev->ttport << 8;
 	}
 	xhci_dbg(xhci, "udev->tt = %p\n", udev->tt);
 	xhci_dbg(xhci, "udev->ttport = 0x%x\n", udev->ttport);
@@ -360,10 +411,9 @@ int xhci_setup_addressable_virt_dev(struct xhci_hcd *xhci, struct usb_device *ud
 	ep0_ctx->ep_info2 |= MAX_BURST(0);
 	ep0_ctx->ep_info2 |= ERROR_COUNT(3);
 
-	ep0_ctx->deq[0] =
+	ep0_ctx->deq =
 		dev->ep_rings[0]->first_seg->dma;
-	ep0_ctx->deq[0] |= dev->ep_rings[0]->cycle_state;
-	ep0_ctx->deq[1] = 0;
+	ep0_ctx->deq |= dev->ep_rings[0]->cycle_state;
 
 	/* Steps 7 and 8 were done in xhci_alloc_virt_device() */
 
@@ -470,25 +520,26 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 	unsigned int max_burst;
 
 	ep_index = xhci_get_endpoint_index(&ep->desc);
-	ep_ctx = &virt_dev->in_ctx->ep[ep_index];
+	ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
 
 	/* Set up the endpoint ring */
 	virt_dev->new_ep_rings[ep_index] = xhci_ring_alloc(xhci, 1, true, mem_flags);
 	if (!virt_dev->new_ep_rings[ep_index])
 		return -ENOMEM;
 	ep_ring = virt_dev->new_ep_rings[ep_index];
-	ep_ctx->deq[0] = ep_ring->first_seg->dma | ep_ring->cycle_state;
-	ep_ctx->deq[1] = 0;
+	ep_ctx->deq = ep_ring->first_seg->dma | ep_ring->cycle_state;
 
 	ep_ctx->ep_info = xhci_get_endpoint_interval(udev, ep);
 
 	/* FIXME dig Mult and streams info out of ep companion desc */
 
-	/* Allow 3 retries for everything but isoc */
+	/* Allow 3 retries for everything but isoc;
+	 * error count = 0 means infinite retries.
+	 */
 	if (!usb_endpoint_xfer_isoc(&ep->desc))
 		ep_ctx->ep_info2 = ERROR_COUNT(3);
 	else
-		ep_ctx->ep_info2 = ERROR_COUNT(0);
+		ep_ctx->ep_info2 = ERROR_COUNT(1);
 
 	ep_ctx->ep_info2 |= xhci_get_endpoint_type(udev, ep);
 
@@ -498,7 +549,12 @@ int xhci_endpoint_init(struct xhci_hcd *xhci,
 		max_packet = ep->desc.wMaxPacketSize;
 		ep_ctx->ep_info2 |= MAX_PACKET(max_packet);
 		/* dig out max burst from ep companion desc */
-		max_packet = ep->ss_ep_comp->desc.bMaxBurst;
+		if (!ep->ss_ep_comp) {
+			xhci_warn(xhci, "WARN no SS endpoint companion descriptor.\n");
+			max_packet = 0;
+		} else {
+			max_packet = ep->ss_ep_comp->desc.bMaxBurst;
+		}
 		ep_ctx->ep_info2 |= MAX_BURST(max_packet);
 		break;
 	case USB_SPEED_HIGH:
@@ -531,18 +587,114 @@ void xhci_endpoint_zero(struct xhci_hcd *xhci,
 	struct xhci_ep_ctx *ep_ctx;
 
 	ep_index = xhci_get_endpoint_index(&ep->desc);
-	ep_ctx = &virt_dev->in_ctx->ep[ep_index];
+	ep_ctx = xhci_get_ep_ctx(xhci, virt_dev->in_ctx, ep_index);
 
 	ep_ctx->ep_info = 0;
 	ep_ctx->ep_info2 = 0;
-	ep_ctx->deq[0] = 0;
-	ep_ctx->deq[1] = 0;
+	ep_ctx->deq = 0;
 	ep_ctx->tx_info = 0;
 	/* Don't free the endpoint ring until the set interface or configuration
 	 * request succeeds.
 	 */
 }
 
+/* Set up the scratchpad buffer array and scratchpad buffers, if needed. */
+static int scratchpad_alloc(struct xhci_hcd *xhci, gfp_t flags)
+{
+	int i;
+	struct device *dev = xhci_to_hcd(xhci)->self.controller;
+	int num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2);
+
+	xhci_dbg(xhci, "Allocating %d scratchpad buffers\n", num_sp);
+
+	if (!num_sp)
+		return 0;
+
+	xhci->scratchpad = kzalloc(sizeof(*xhci->scratchpad), flags);
+	if (!xhci->scratchpad)
+		goto fail_sp;
+
+	xhci->scratchpad->sp_array =
+		pci_alloc_consistent(to_pci_dev(dev),
+				     num_sp * sizeof(u64),
+				     &xhci->scratchpad->sp_dma);
+	if (!xhci->scratchpad->sp_array)
+		goto fail_sp2;
+
+	xhci->scratchpad->sp_buffers = kzalloc(sizeof(void *) * num_sp, flags);
+	if (!xhci->scratchpad->sp_buffers)
+		goto fail_sp3;
+
+	xhci->scratchpad->sp_dma_buffers =
+		kzalloc(sizeof(dma_addr_t) * num_sp, flags);
+
+	if (!xhci->scratchpad->sp_dma_buffers)
+		goto fail_sp4;
+
+	xhci->dcbaa->dev_context_ptrs[0] = xhci->scratchpad->sp_dma;
+	for (i = 0; i < num_sp; i++) {
+		dma_addr_t dma;
+		void *buf = pci_alloc_consistent(to_pci_dev(dev),
+						 xhci->page_size, &dma);
+		if (!buf)
+			goto fail_sp5;
+
+		xhci->scratchpad->sp_array[i] = dma;
+		xhci->scratchpad->sp_buffers[i] = buf;
+		xhci->scratchpad->sp_dma_buffers[i] = dma;
+	}
+
+	return 0;
+
+ fail_sp5:
+	for (i = i - 1; i >= 0; i--) {
+		pci_free_consistent(to_pci_dev(dev), xhci->page_size,
+				    xhci->scratchpad->sp_buffers[i],
+				    xhci->scratchpad->sp_dma_buffers[i]);
+	}
+	kfree(xhci->scratchpad->sp_dma_buffers);
+
+ fail_sp4:
+	kfree(xhci->scratchpad->sp_buffers);
+
+ fail_sp3:
+	pci_free_consistent(to_pci_dev(dev), num_sp * sizeof(u64),
+			    xhci->scratchpad->sp_array,
+			    xhci->scratchpad->sp_dma);
+
+ fail_sp2:
+	kfree(xhci->scratchpad);
+	xhci->scratchpad = NULL;
+
+ fail_sp:
+	return -ENOMEM;
+}
+
+static void scratchpad_free(struct xhci_hcd *xhci)
+{
+	int num_sp;
+	int i;
+	struct pci_dev	*pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
+
+	if (!xhci->scratchpad)
+		return;
+
+	num_sp = HCS_MAX_SCRATCHPAD(xhci->hcs_params2);
+
+	for (i = 0; i < num_sp; i++) {
+		pci_free_consistent(pdev, xhci->page_size,
+				    xhci->scratchpad->sp_buffers[i],
+				    xhci->scratchpad->sp_dma_buffers[i]);
+	}
+	kfree(xhci->scratchpad->sp_dma_buffers);
+	kfree(xhci->scratchpad->sp_buffers);
+	pci_free_consistent(pdev, num_sp * sizeof(u64),
+			    xhci->scratchpad->sp_array,
+			    xhci->scratchpad->sp_dma);
+	kfree(xhci->scratchpad);
+	xhci->scratchpad = NULL;
+}
+
 void xhci_mem_cleanup(struct xhci_hcd *xhci)
 {
 	struct pci_dev	*pdev = to_pci_dev(xhci_to_hcd(xhci)->self.controller);
@@ -551,10 +703,8 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 
 	/* Free the Event Ring Segment Table and the actual Event Ring */
 	xhci_writel(xhci, 0, &xhci->ir_set->erst_size);
-	xhci_writel(xhci, 0, &xhci->ir_set->erst_base[0]);
-	xhci_writel(xhci, 0, &xhci->ir_set->erst_base[1]);
-	xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[0]);
-	xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[1]);
+	xhci_write_64(xhci, 0, &xhci->ir_set->erst_base);
+	xhci_write_64(xhci, 0, &xhci->ir_set->erst_dequeue);
 	size = sizeof(struct xhci_erst_entry)*(xhci->erst.num_entries);
 	if (xhci->erst.entries)
 		pci_free_consistent(pdev, size,
@@ -566,8 +716,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	xhci->event_ring = NULL;
 	xhci_dbg(xhci, "Freed event ring\n");
 
-	xhci_writel(xhci, 0, &xhci->op_regs->cmd_ring[0]);
-	xhci_writel(xhci, 0, &xhci->op_regs->cmd_ring[1]);
+	xhci_write_64(xhci, 0, &xhci->op_regs->cmd_ring);
 	if (xhci->cmd_ring)
 		xhci_ring_free(xhci, xhci->cmd_ring);
 	xhci->cmd_ring = NULL;
@@ -586,8 +735,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 	xhci->device_pool = NULL;
 	xhci_dbg(xhci, "Freed device context pool\n");
 
-	xhci_writel(xhci, 0, &xhci->op_regs->dcbaa_ptr[0]);
-	xhci_writel(xhci, 0, &xhci->op_regs->dcbaa_ptr[1]);
+	xhci_write_64(xhci, 0, &xhci->op_regs->dcbaa_ptr);
 	if (xhci->dcbaa)
 		pci_free_consistent(pdev, sizeof(*xhci->dcbaa),
 				xhci->dcbaa, xhci->dcbaa->dma);
@@ -595,6 +743,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci)
 
 	xhci->page_size = 0;
 	xhci->page_shift = 0;
+	scratchpad_free(xhci);
 }
 
 int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
@@ -602,6 +751,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	dma_addr_t	dma;
 	struct device	*dev = xhci_to_hcd(xhci)->self.controller;
 	unsigned int	val, val2;
+	u64		val_64;
 	struct xhci_segment	*seg;
 	u32 page_size;
 	int i;
@@ -647,8 +797,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	xhci->dcbaa->dma = dma;
 	xhci_dbg(xhci, "// Device context base array address = 0x%llx (DMA), %p (virt)\n",
 			(unsigned long long)xhci->dcbaa->dma, xhci->dcbaa);
-	xhci_writel(xhci, dma, &xhci->op_regs->dcbaa_ptr[0]);
-	xhci_writel(xhci, (u32) 0, &xhci->op_regs->dcbaa_ptr[1]);
+	xhci_write_64(xhci, dma, &xhci->op_regs->dcbaa_ptr);
 
 	/*
 	 * Initialize the ring segment pool.  The ring must be a contiguous
@@ -658,11 +807,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	 */
 	xhci->segment_pool = dma_pool_create("xHCI ring segments", dev,
 			SEGMENT_SIZE, 64, xhci->page_size);
+
 	/* See Table 46 and Note on Figure 55 */
-	/* FIXME support 64-byte contexts */
 	xhci->device_pool = dma_pool_create("xHCI input/output contexts", dev,
-			sizeof(struct xhci_device_control),
-			64, xhci->page_size);
+			2112, 64, xhci->page_size);
 	if (!xhci->segment_pool || !xhci->device_pool)
 		goto fail;
 
@@ -675,14 +823,12 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 			(unsigned long long)xhci->cmd_ring->first_seg->dma);
 
 	/* Set the address in the Command Ring Control register */
-	val = xhci_readl(xhci, &xhci->op_regs->cmd_ring[0]);
-	val = (val & ~CMD_RING_ADDR_MASK) |
-		(xhci->cmd_ring->first_seg->dma & CMD_RING_ADDR_MASK) |
+	val_64 = xhci_read_64(xhci, &xhci->op_regs->cmd_ring);
+	val_64 = (val_64 & (u64) CMD_RING_RSVD_BITS) |
+		(xhci->cmd_ring->first_seg->dma & (u64) ~CMD_RING_RSVD_BITS) |
 		xhci->cmd_ring->cycle_state;
-	xhci_dbg(xhci, "// Setting command ring address low bits to 0x%x\n", val);
-	xhci_writel(xhci, val, &xhci->op_regs->cmd_ring[0]);
-	xhci_dbg(xhci, "// Setting command ring address high bits to 0x0\n");
-	xhci_writel(xhci, (u32) 0, &xhci->op_regs->cmd_ring[1]);
+	xhci_dbg(xhci, "// Setting command ring address to 0x%x\n", val);
+	xhci_write_64(xhci, val_64, &xhci->op_regs->cmd_ring);
 	xhci_dbg_cmd_ptrs(xhci);
 
 	val = xhci_readl(xhci, &xhci->cap_regs->db_off);
@@ -722,8 +868,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	/* set ring base address and size for each segment table entry */
 	for (val = 0, seg = xhci->event_ring->first_seg; val < ERST_NUM_SEGS; val++) {
 		struct xhci_erst_entry *entry = &xhci->erst.entries[val];
-		entry->seg_addr[0] = seg->dma;
-		entry->seg_addr[1] = 0;
+		entry->seg_addr = seg->dma;
 		entry->seg_size = TRBS_PER_SEGMENT;
 		entry->rsvd = 0;
 		seg = seg->next;
@@ -741,11 +886,10 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	/* set the segment table base address */
 	xhci_dbg(xhci, "// Set ERST base address for ir_set 0 = 0x%llx\n",
 			(unsigned long long)xhci->erst.erst_dma_addr);
-	val = xhci_readl(xhci, &xhci->ir_set->erst_base[0]);
-	val &= ERST_PTR_MASK;
-	val |= (xhci->erst.erst_dma_addr & ~ERST_PTR_MASK);
-	xhci_writel(xhci, val, &xhci->ir_set->erst_base[0]);
-	xhci_writel(xhci, 0, &xhci->ir_set->erst_base[1]);
+	val_64 = xhci_read_64(xhci, &xhci->ir_set->erst_base);
+	val_64 &= ERST_PTR_MASK;
+	val_64 |= (xhci->erst.erst_dma_addr & (u64) ~ERST_PTR_MASK);
+	xhci_write_64(xhci, val_64, &xhci->ir_set->erst_base);
 
 	/* Set the event ring dequeue address */
 	xhci_set_hc_event_deq(xhci);
@@ -761,7 +905,11 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	for (i = 0; i < MAX_HC_SLOTS; ++i)
 		xhci->devs[i] = 0;
 
+	if (scratchpad_alloc(xhci, flags))
+		goto fail;
+
 	return 0;
+
 fail:
 	xhci_warn(xhci, "Couldn't initialize memory\n");
 	xhci_mem_cleanup(xhci);
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 1462709..592fe7e 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -117,6 +117,7 @@ static const struct hc_driver xhci_pci_hc_driver = {
 	.free_dev =		xhci_free_dev,
 	.add_endpoint =		xhci_add_endpoint,
 	.drop_endpoint =	xhci_drop_endpoint,
+	.endpoint_reset =	xhci_endpoint_reset,
 	.check_bandwidth =	xhci_check_bandwidth,
 	.reset_bandwidth =	xhci_reset_bandwidth,
 	.address_device =	xhci_address_device,
diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c
index 02d8198..aa88a06 100644
--- a/drivers/usb/host/xhci-ring.c
+++ b/drivers/usb/host/xhci-ring.c
@@ -135,6 +135,7 @@ static void next_trb(struct xhci_hcd *xhci,
 static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer)
 {
 	union xhci_trb *next = ++(ring->dequeue);
+	unsigned long long addr;
 
 	ring->deq_updates++;
 	/* Update the dequeue pointer further if that was a link TRB or we're at
@@ -152,6 +153,13 @@ static void inc_deq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
 		ring->dequeue = ring->deq_seg->trbs;
 		next = ring->dequeue;
 	}
+	addr = (unsigned long long) xhci_trb_virt_to_dma(ring->deq_seg, ring->dequeue);
+	if (ring == xhci->event_ring)
+		xhci_dbg(xhci, "Event ring deq = 0x%llx (DMA)\n", addr);
+	else if (ring == xhci->cmd_ring)
+		xhci_dbg(xhci, "Command ring deq = 0x%llx (DMA)\n", addr);
+	else
+		xhci_dbg(xhci, "Ring deq = 0x%llx (DMA)\n", addr);
 }
 
 /*
@@ -171,6 +179,7 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
 {
 	u32 chain;
 	union xhci_trb *next;
+	unsigned long long addr;
 
 	chain = ring->enqueue->generic.field[3] & TRB_CHAIN;
 	next = ++(ring->enqueue);
@@ -204,6 +213,13 @@ static void inc_enq(struct xhci_hcd *xhci, struct xhci_ring *ring, bool consumer
 		ring->enqueue = ring->enq_seg->trbs;
 		next = ring->enqueue;
 	}
+	addr = (unsigned long long) xhci_trb_virt_to_dma(ring->enq_seg, ring->enqueue);
+	if (ring == xhci->event_ring)
+		xhci_dbg(xhci, "Event ring enq = 0x%llx (DMA)\n", addr);
+	else if (ring == xhci->cmd_ring)
+		xhci_dbg(xhci, "Command ring enq = 0x%llx (DMA)\n", addr);
+	else
+		xhci_dbg(xhci, "Ring enq = 0x%llx (DMA)\n", addr);
 }
 
 /*
@@ -237,7 +253,7 @@ static int room_on_ring(struct xhci_hcd *xhci, struct xhci_ring *ring,
 
 void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
 {
-	u32 temp;
+	u64 temp;
 	dma_addr_t deq;
 
 	deq = xhci_trb_virt_to_dma(xhci->event_ring->deq_seg,
@@ -246,13 +262,15 @@ void xhci_set_hc_event_deq(struct xhci_hcd *xhci)
 		xhci_warn(xhci, "WARN something wrong with SW event ring "
 				"dequeue ptr.\n");
 	/* Update HC event ring dequeue pointer */
-	temp = xhci_readl(xhci, &xhci->ir_set->erst_dequeue[0]);
+	temp = xhci_read_64(xhci, &xhci->ir_set->erst_dequeue);
 	temp &= ERST_PTR_MASK;
-	if (!in_interrupt())
-		xhci_dbg(xhci, "// Write event ring dequeue pointer\n");
-	xhci_writel(xhci, 0, &xhci->ir_set->erst_dequeue[1]);
-	xhci_writel(xhci, (deq & ~ERST_PTR_MASK) | temp,
-			&xhci->ir_set->erst_dequeue[0]);
+	/* Don't clear the EHB bit (which is RW1C) because
+	 * there might be more events to service.
+	 */
+	temp &= ~ERST_EHB;
+	xhci_dbg(xhci, "// Write event ring dequeue pointer, preserving EHB bit\n");
+	xhci_write_64(xhci, ((u64) deq & (u64) ~ERST_PTR_MASK) | temp,
+			&xhci->ir_set->erst_dequeue);
 }
 
 /* Ring the host controller doorbell after placing a command on the ring */
@@ -279,7 +297,8 @@ static void ring_ep_doorbell(struct xhci_hcd *xhci,
 	/* Don't ring the doorbell for this endpoint if there are pending
 	 * cancellations because the we don't want to interrupt processing.
 	 */
-	if (!ep_ring->cancels_pending && !(ep_ring->state & SET_DEQ_PENDING)) {
+	if (!ep_ring->cancels_pending && !(ep_ring->state & SET_DEQ_PENDING)
+			&& !(ep_ring->state & EP_HALTED)) {
 		field = xhci_readl(xhci, db_addr) & DB_MASK;
 		xhci_writel(xhci, field | EPI_TO_DB(ep_index), db_addr);
 		/* Flush PCI posted writes - FIXME Matthew Wilcox says this
@@ -316,12 +335,6 @@ static struct xhci_segment *find_trb_seg(
 	return cur_seg;
 }
 
-struct dequeue_state {
-	struct xhci_segment *new_deq_seg;
-	union xhci_trb *new_deq_ptr;
-	int new_cycle_state;
-};
-
 /*
  * Move the xHC's endpoint ring dequeue pointer past cur_td.
  * Record the new state of the xHC's endpoint ring dequeue segment,
@@ -336,24 +349,30 @@ struct dequeue_state {
  *  - Finally we move the dequeue state one TRB further, toggling the cycle bit
  *    if we've moved it past a link TRB with the toggle cycle bit set.
  */
-static void find_new_dequeue_state(struct xhci_hcd *xhci,
+void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
 		unsigned int slot_id, unsigned int ep_index,
-		struct xhci_td *cur_td, struct dequeue_state *state)
+		struct xhci_td *cur_td, struct xhci_dequeue_state *state)
 {
 	struct xhci_virt_device *dev = xhci->devs[slot_id];
 	struct xhci_ring *ep_ring = dev->ep_rings[ep_index];
 	struct xhci_generic_trb *trb;
+	struct xhci_ep_ctx *ep_ctx;
+	dma_addr_t addr;
 
 	state->new_cycle_state = 0;
+	xhci_dbg(xhci, "Finding segment containing stopped TRB.\n");
 	state->new_deq_seg = find_trb_seg(cur_td->start_seg,
 			ep_ring->stopped_trb,
 			&state->new_cycle_state);
 	if (!state->new_deq_seg)
 		BUG();
 	/* Dig out the cycle state saved by the xHC during the stop ep cmd */
-	state->new_cycle_state = 0x1 & dev->out_ctx->ep[ep_index].deq[0];
+	xhci_dbg(xhci, "Finding endpoint context\n");
+	ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
+	state->new_cycle_state = 0x1 & ep_ctx->deq;
 
 	state->new_deq_ptr = cur_td->last_trb;
+	xhci_dbg(xhci, "Finding segment containing last TRB in TD.\n");
 	state->new_deq_seg = find_trb_seg(state->new_deq_seg,
 			state->new_deq_ptr,
 			&state->new_cycle_state);
@@ -367,6 +386,12 @@ static void find_new_dequeue_state(struct xhci_hcd *xhci,
 	next_trb(xhci, ep_ring, &state->new_deq_seg, &state->new_deq_ptr);
 
 	/* Don't update the ring cycle state for the producer (us). */
+	xhci_dbg(xhci, "New dequeue segment = %p (virtual)\n",
+			state->new_deq_seg);
+	addr = xhci_trb_virt_to_dma(state->new_deq_seg, state->new_deq_ptr);
+	xhci_dbg(xhci, "New dequeue pointer = 0x%llx (DMA)\n",
+			(unsigned long long) addr);
+	xhci_dbg(xhci, "Setting dequeue pointer in internal ring state.\n");
 	ep_ring->dequeue = state->new_deq_ptr;
 	ep_ring->deq_seg = state->new_deq_seg;
 }
@@ -416,6 +441,30 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
 		unsigned int ep_index, struct xhci_segment *deq_seg,
 		union xhci_trb *deq_ptr, u32 cycle_state);
 
+void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
+		struct xhci_ring *ep_ring, unsigned int slot_id,
+		unsigned int ep_index, struct xhci_dequeue_state *deq_state)
+{
+	xhci_dbg(xhci, "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), "
+			"new deq ptr = %p (0x%llx dma), new cycle = %u\n",
+			deq_state->new_deq_seg,
+			(unsigned long long)deq_state->new_deq_seg->dma,
+			deq_state->new_deq_ptr,
+			(unsigned long long)xhci_trb_virt_to_dma(deq_state->new_deq_seg, deq_state->new_deq_ptr),
+			deq_state->new_cycle_state);
+	queue_set_tr_deq(xhci, slot_id, ep_index,
+			deq_state->new_deq_seg,
+			deq_state->new_deq_ptr,
+			(u32) deq_state->new_cycle_state);
+	/* Stop the TD queueing code from ringing the doorbell until
+	 * this command completes.  The HC won't set the dequeue pointer
+	 * if the ring is running, and ringing the doorbell starts the
+	 * ring running.
+	 */
+	ep_ring->state |= SET_DEQ_PENDING;
+	xhci_ring_cmd_db(xhci);
+}
+
 /*
  * When we get a command completion for a Stop Endpoint Command, we need to
  * unlink any cancelled TDs from the ring.  There are two ways to do that:
@@ -436,7 +485,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
 	struct xhci_td *cur_td = 0;
 	struct xhci_td *last_unlinked_td;
 
-	struct dequeue_state deq_state;
+	struct xhci_dequeue_state deq_state;
 #ifdef CONFIG_USB_HCD_STAT
 	ktime_t stop_time = ktime_get();
 #endif
@@ -464,7 +513,7 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
 		 * move the xHC endpoint ring dequeue pointer past this TD.
 		 */
 		if (cur_td == ep_ring->stopped_td)
-			find_new_dequeue_state(xhci, slot_id, ep_index, cur_td,
+			xhci_find_new_dequeue_state(xhci, slot_id, ep_index, cur_td,
 					&deq_state);
 		else
 			td_to_noop(xhci, ep_ring, cur_td);
@@ -480,24 +529,8 @@ static void handle_stopped_endpoint(struct xhci_hcd *xhci,
 
 	/* If necessary, queue a Set Transfer Ring Dequeue Pointer command */
 	if (deq_state.new_deq_ptr && deq_state.new_deq_seg) {
-		xhci_dbg(xhci, "Set TR Deq Ptr cmd, new deq seg = %p (0x%llx dma), "
-				"new deq ptr = %p (0x%llx dma), new cycle = %u\n",
-				deq_state.new_deq_seg,
-				(unsigned long long)deq_state.new_deq_seg->dma,
-				deq_state.new_deq_ptr,
-				(unsigned long long)xhci_trb_virt_to_dma(deq_state.new_deq_seg, deq_state.new_deq_ptr),
-				deq_state.new_cycle_state);
-		queue_set_tr_deq(xhci, slot_id, ep_index,
-				deq_state.new_deq_seg,
-				deq_state.new_deq_ptr,
-				(u32) deq_state.new_cycle_state);
-		/* Stop the TD queueing code from ringing the doorbell until
-		 * this command completes.  The HC won't set the dequeue pointer
-		 * if the ring is running, and ringing the doorbell starts the
-		 * ring running.
-		 */
-		ep_ring->state |= SET_DEQ_PENDING;
-		xhci_ring_cmd_db(xhci);
+		xhci_queue_new_dequeue_state(xhci, ep_ring,
+				slot_id, ep_index, &deq_state);
 	} else {
 		/* Otherwise just ring the doorbell to restart the ring */
 		ring_ep_doorbell(xhci, slot_id, ep_index);
@@ -551,11 +584,15 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci,
 	unsigned int ep_index;
 	struct xhci_ring *ep_ring;
 	struct xhci_virt_device *dev;
+	struct xhci_ep_ctx *ep_ctx;
+	struct xhci_slot_ctx *slot_ctx;
 
 	slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
 	ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
 	dev = xhci->devs[slot_id];
 	ep_ring = dev->ep_rings[ep_index];
+	ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index);
+	slot_ctx = xhci_get_slot_ctx(xhci, dev->out_ctx);
 
 	if (GET_COMP_CODE(event->status) != COMP_SUCCESS) {
 		unsigned int ep_state;
@@ -569,9 +606,9 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci,
 		case COMP_CTX_STATE:
 			xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due "
 					"to incorrect slot or ep state.\n");
-			ep_state = dev->out_ctx->ep[ep_index].ep_info;
+			ep_state = ep_ctx->ep_info;
 			ep_state &= EP_STATE_MASK;
-			slot_state = dev->out_ctx->slot.dev_state;
+			slot_state = slot_ctx->dev_state;
 			slot_state = GET_SLOT_STATE(slot_state);
 			xhci_dbg(xhci, "Slot state = %u, EP state = %u\n",
 					slot_state, ep_state);
@@ -593,16 +630,33 @@ static void handle_set_deq_completion(struct xhci_hcd *xhci,
 		 * cancelling URBs, which might not be an error...
 		 */
 	} else {
-		xhci_dbg(xhci, "Successful Set TR Deq Ptr cmd, deq[0] = 0x%x, "
-				"deq[1] = 0x%x.\n",
-				dev->out_ctx->ep[ep_index].deq[0],
-				dev->out_ctx->ep[ep_index].deq[1]);
+		xhci_dbg(xhci, "Successful Set TR Deq Ptr cmd, deq = @%08llx\n",
+				ep_ctx->deq);
 	}
 
 	ep_ring->state &= ~SET_DEQ_PENDING;
 	ring_ep_doorbell(xhci, slot_id, ep_index);
 }
 
+static void handle_reset_ep_completion(struct xhci_hcd *xhci,
+		struct xhci_event_cmd *event,
+		union xhci_trb *trb)
+{
+	int slot_id;
+	unsigned int ep_index;
+
+	slot_id = TRB_TO_SLOT_ID(trb->generic.field[3]);
+	ep_index = TRB_TO_EP_INDEX(trb->generic.field[3]);
+	/* This command will only fail if the endpoint wasn't halted,
+	 * but we don't care.
+	 */
+	xhci_dbg(xhci, "Ignoring reset ep completion code of %u\n",
+			(unsigned int) GET_COMP_CODE(event->status));
+
+	/* Clear our internal halted state and restart the ring */
+	xhci->devs[slot_id]->ep_rings[ep_index]->state &= ~EP_HALTED;
+	ring_ep_doorbell(xhci, slot_id, ep_index);
+}
 
 static void handle_cmd_completion(struct xhci_hcd *xhci,
 		struct xhci_event_cmd *event)
@@ -611,7 +665,7 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
 	u64 cmd_dma;
 	dma_addr_t cmd_dequeue_dma;
 
-	cmd_dma = (((u64) event->cmd_trb[1]) << 32) + event->cmd_trb[0];
+	cmd_dma = event->cmd_trb;
 	cmd_dequeue_dma = xhci_trb_virt_to_dma(xhci->cmd_ring->deq_seg,
 			xhci->cmd_ring->dequeue);
 	/* Is the command ring deq ptr out of sync with the deq seg ptr? */
@@ -653,6 +707,9 @@ static void handle_cmd_completion(struct xhci_hcd *xhci,
 	case TRB_TYPE(TRB_CMD_NOOP):
 		++xhci->noops_handled;
 		break;
+	case TRB_TYPE(TRB_RESET_EP):
+		handle_reset_ep_completion(xhci, event, xhci->cmd_ring->dequeue);
+		break;
 	default:
 		/* Skip over unknown commands on the event ring */
 		xhci->error_bitmask |= 1 << 6;
@@ -756,7 +813,9 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 	union xhci_trb *event_trb;
 	struct urb *urb = 0;
 	int status = -EINPROGRESS;
+	struct xhci_ep_ctx *ep_ctx;
 
+	xhci_dbg(xhci, "In %s\n", __func__);
 	xdev = xhci->devs[TRB_TO_SLOT_ID(event->flags)];
 	if (!xdev) {
 		xhci_err(xhci, "ERROR Transfer event pointed to bad slot\n");
@@ -765,17 +824,17 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 
 	/* Endpoint ID is 1 based, our index is zero based */
 	ep_index = TRB_TO_EP_ID(event->flags) - 1;
+	xhci_dbg(xhci, "%s - ep index = %d\n", __func__, ep_index);
 	ep_ring = xdev->ep_rings[ep_index];
-	if (!ep_ring || (xdev->out_ctx->ep[ep_index].ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) {
+	ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
+	if (!ep_ring || (ep_ctx->ep_info & EP_STATE_MASK) == EP_STATE_DISABLED) {
 		xhci_err(xhci, "ERROR Transfer event pointed to disabled endpoint\n");
 		return -ENODEV;
 	}
 
-	event_dma = event->buffer[0];
-	if (event->buffer[1] != 0)
-		xhci_warn(xhci, "WARN ignoring upper 32-bits of 64-bit TRB dma address\n");
-
+	event_dma = event->buffer;
 	/* This TRB should be in the TD at the head of this ring's TD list */
+	xhci_dbg(xhci, "%s - checking for list empty\n", __func__);
 	if (list_empty(&ep_ring->td_list)) {
 		xhci_warn(xhci, "WARN Event TRB for slot %d ep %d with no TDs queued?\n",
 				TRB_TO_SLOT_ID(event->flags), ep_index);
@@ -785,11 +844,14 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 		urb = NULL;
 		goto cleanup;
 	}
+	xhci_dbg(xhci, "%s - getting list entry\n", __func__);
 	td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list);
 
 	/* Is this a TRB in the currently executing TD? */
+	xhci_dbg(xhci, "%s - looking for TD\n", __func__);
 	event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue,
 			td->last_trb, event_dma);
+	xhci_dbg(xhci, "%s - found event_seg = %p\n", __func__, event_seg);
 	if (!event_seg) {
 		/* HC is busted, give up! */
 		xhci_err(xhci, "ERROR Transfer event TRB DMA ptr not part of current TD\n");
@@ -798,10 +860,10 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 	event_trb = &event_seg->trbs[(event_dma - event_seg->dma) / sizeof(*event_trb)];
 	xhci_dbg(xhci, "Event TRB with TRB type ID %u\n",
 			(unsigned int) (event->flags & TRB_TYPE_BITMASK)>>10);
-	xhci_dbg(xhci, "Offset 0x00 (buffer[0]) = 0x%x\n",
-			(unsigned int) event->buffer[0]);
-	xhci_dbg(xhci, "Offset 0x04 (buffer[0]) = 0x%x\n",
-			(unsigned int) event->buffer[1]);
+	xhci_dbg(xhci, "Offset 0x00 (buffer lo) = 0x%x\n",
+			lower_32_bits(event->buffer));
+	xhci_dbg(xhci, "Offset 0x04 (buffer hi) = 0x%x\n",
+			upper_32_bits(event->buffer));
 	xhci_dbg(xhci, "Offset 0x08 (transfer length) = 0x%x\n",
 			(unsigned int) event->transfer_len);
 	xhci_dbg(xhci, "Offset 0x0C (flags) = 0x%x\n",
@@ -823,6 +885,7 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 		break;
 	case COMP_STALL:
 		xhci_warn(xhci, "WARN: Stalled endpoint\n");
+		ep_ring->state |= EP_HALTED;
 		status = -EPIPE;
 		break;
 	case COMP_TRB_ERR:
@@ -833,6 +896,10 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 		xhci_warn(xhci, "WARN: transfer error on endpoint\n");
 		status = -EPROTO;
 		break;
+	case COMP_BABBLE:
+		xhci_warn(xhci, "WARN: babble error on endpoint\n");
+		status = -EOVERFLOW;
+		break;
 	case COMP_DB_ERR:
 		xhci_warn(xhci, "WARN: HC couldn't access mem fast enough\n");
 		status = -ENOSR;
@@ -874,15 +941,26 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 		if (event_trb != ep_ring->dequeue) {
 			/* The event was for the status stage */
 			if (event_trb == td->last_trb) {
-				td->urb->actual_length =
-					td->urb->transfer_buffer_length;
+				if (td->urb->actual_length != 0) {
+					/* Don't overwrite a previously set error code */
+					if (status == -EINPROGRESS || status == 0)
+						/* Did we already see a short data stage? */
+						status = -EREMOTEIO;
+				} else {
+					td->urb->actual_length =
+						td->urb->transfer_buffer_length;
+				}
 			} else {
 			/* Maybe the event was for the data stage? */
-				if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL)
+				if (GET_COMP_CODE(event->transfer_len) != COMP_STOP_INVAL) {
 					/* We didn't stop on a link TRB in the middle */
 					td->urb->actual_length =
 						td->urb->transfer_buffer_length -
 						TRB_LEN(event->transfer_len);
+					xhci_dbg(xhci, "Waiting for status stage event\n");
+					urb = NULL;
+					goto cleanup;
+				}
 			}
 		}
 	} else {
@@ -929,16 +1007,20 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 							TRB_LEN(event->transfer_len));
 					td->urb->actual_length = 0;
 				}
-				if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
-					status = -EREMOTEIO;
-				else
-					status = 0;
+				/* Don't overwrite a previously set error code */
+				if (status == -EINPROGRESS) {
+					if (td->urb->transfer_flags & URB_SHORT_NOT_OK)
+						status = -EREMOTEIO;
+					else
+						status = 0;
+				}
 			} else {
 				td->urb->actual_length = td->urb->transfer_buffer_length;
 				/* Ignore a short packet completion if the
 				 * untransferred length was zero.
 				 */
-				status = 0;
+				if (status == -EREMOTEIO)
+					status = 0;
 			}
 		} else {
 			/* Slow path - walk the list, starting from the dequeue
@@ -965,19 +1047,30 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 					TRB_LEN(event->transfer_len);
 		}
 	}
-	/* The Endpoint Stop Command completion will take care of
-	 * any stopped TDs.  A stopped TD may be restarted, so don't update the
-	 * ring dequeue pointer or take this TD off any lists yet.
-	 */
 	if (GET_COMP_CODE(event->transfer_len) == COMP_STOP_INVAL ||
 			GET_COMP_CODE(event->transfer_len) == COMP_STOP) {
+		/* The Endpoint Stop Command completion will take care of any
+		 * stopped TDs.  A stopped TD may be restarted, so don't update
+		 * the ring dequeue pointer or take this TD off any lists yet.
+		 */
 		ep_ring->stopped_td = td;
 		ep_ring->stopped_trb = event_trb;
 	} else {
-		/* Update ring dequeue pointer */
-		while (ep_ring->dequeue != td->last_trb)
+		if (GET_COMP_CODE(event->transfer_len) == COMP_STALL) {
+			/* The transfer is completed from the driver's
+			 * perspective, but we need to issue a set dequeue
+			 * command for this stalled endpoint to move the dequeue
+			 * pointer past the TD.  We can't do that here because
+			 * the halt condition must be cleared first.
+			 */
+			ep_ring->stopped_td = td;
+			ep_ring->stopped_trb = event_trb;
+		} else {
+			/* Update ring dequeue pointer */
+			while (ep_ring->dequeue != td->last_trb)
+				inc_deq(xhci, ep_ring, false);
 			inc_deq(xhci, ep_ring, false);
-		inc_deq(xhci, ep_ring, false);
+		}
 
 		/* Clean up the endpoint's TD list */
 		urb = td->urb;
@@ -987,7 +1080,10 @@ static int handle_tx_event(struct xhci_hcd *xhci,
 			list_del(&td->cancelled_td_list);
 			ep_ring->cancels_pending--;
 		}
-		kfree(td);
+		/* Leave the TD around for the reset endpoint function to use */
+		if (GET_COMP_CODE(event->transfer_len) != COMP_STALL) {
+			kfree(td);
+		}
 		urb->hcpriv = NULL;
 	}
 cleanup:
@@ -997,6 +1093,8 @@ cleanup:
 	/* FIXME for multi-TD URBs (who have buffers bigger than 64MB) */
 	if (urb) {
 		usb_hcd_unlink_urb_from_ep(xhci_to_hcd(xhci), urb);
+		xhci_dbg(xhci, "Giveback URB %p, len = %d, status = %d\n",
+				urb, td->urb->actual_length, status);
 		spin_unlock(&xhci->lock);
 		usb_hcd_giveback_urb(xhci_to_hcd(xhci), urb, status);
 		spin_lock(&xhci->lock);
@@ -1014,6 +1112,7 @@ void xhci_handle_event(struct xhci_hcd *xhci)
 	int update_ptrs = 1;
 	int ret;
 
+	xhci_dbg(xhci, "In %s\n", __func__);
 	if (!xhci->event_ring || !xhci->event_ring->dequeue) {
 		xhci->error_bitmask |= 1 << 1;
 		return;
@@ -1026,18 +1125,25 @@ void xhci_handle_event(struct xhci_hcd *xhci)
 		xhci->error_bitmask |= 1 << 2;
 		return;
 	}
+	xhci_dbg(xhci, "%s - OS owns TRB\n", __func__);
 
 	/* FIXME: Handle more event types. */
 	switch ((event->event_cmd.flags & TRB_TYPE_BITMASK)) {
 	case TRB_TYPE(TRB_COMPLETION):
+		xhci_dbg(xhci, "%s - calling handle_cmd_completion\n", __func__);
 		handle_cmd_completion(xhci, &event->event_cmd);
+		xhci_dbg(xhci, "%s - returned from handle_cmd_completion\n", __func__);
 		break;
 	case TRB_TYPE(TRB_PORT_STATUS):
+		xhci_dbg(xhci, "%s - calling handle_port_status\n", __func__);
 		handle_port_status(xhci, event);
+		xhci_dbg(xhci, "%s - returned from handle_port_status\n", __func__);
 		update_ptrs = 0;
 		break;
 	case TRB_TYPE(TRB_TRANSFER):
+		xhci_dbg(xhci, "%s - calling handle_tx_event\n", __func__);
 		ret = handle_tx_event(xhci, &event->trans_event);
+		xhci_dbg(xhci, "%s - returned from handle_tx_event\n", __func__);
 		if (ret < 0)
 			xhci->error_bitmask |= 1 << 9;
 		else
@@ -1093,13 +1199,13 @@ static int prepare_ring(struct xhci_hcd *xhci, struct xhci_ring *ep_ring,
 		 */
 		xhci_warn(xhci, "WARN urb submitted to disabled ep\n");
 		return -ENOENT;
-	case EP_STATE_HALTED:
 	case EP_STATE_ERROR:
-		xhci_warn(xhci, "WARN waiting for halt or error on ep "
-				"to be cleared\n");
+		xhci_warn(xhci, "WARN waiting for error on ep to be cleared\n");
 		/* FIXME event handling code for error needs to clear it */
 		/* XXX not sure if this should be -ENOENT or not */
 		return -EINVAL;
+	case EP_STATE_HALTED:
+		xhci_dbg(xhci, "WARN halted endpoint, queueing URB anyway.\n");
 	case EP_STATE_STOPPED:
 	case EP_STATE_RUNNING:
 		break;
@@ -1128,9 +1234,9 @@ static int prepare_transfer(struct xhci_hcd *xhci,
 		gfp_t mem_flags)
 {
 	int ret;
-
+	struct xhci_ep_ctx *ep_ctx = xhci_get_ep_ctx(xhci, xdev->out_ctx, ep_index);
 	ret = prepare_ring(xhci, xdev->ep_rings[ep_index],
-			xdev->out_ctx->ep[ep_index].ep_info & EP_STATE_MASK,
+			ep_ctx->ep_info & EP_STATE_MASK,
 			num_trbs, mem_flags);
 	if (ret)
 		return ret;
@@ -1285,6 +1391,7 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	/* Queue the first TRB, even if it's zero-length */
 	do {
 		u32 field = 0;
+		u32 length_field = 0;
 
 		/* Don't change the cycle bit of the first TRB until later */
 		if (first_trb)
@@ -1314,10 +1421,13 @@ static int queue_bulk_sg_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 					(unsigned int) (addr + TRB_MAX_BUFF_SIZE) & ~(TRB_MAX_BUFF_SIZE - 1),
 					(unsigned int) addr + trb_buff_len);
 		}
+		length_field = TRB_LEN(trb_buff_len) |
+			TD_REMAINDER(urb->transfer_buffer_length - running_total) |
+			TRB_INTR_TARGET(0);
 		queue_trb(xhci, ep_ring, false,
-				(u32) addr,
-				(u32) ((u64) addr >> 32),
-				TRB_LEN(trb_buff_len) | TRB_INTR_TARGET(0),
+				lower_32_bits(addr),
+				upper_32_bits(addr),
+				length_field,
 				/* We always want to know if the TRB was short,
 				 * or we won't get an event when it completes.
 				 * (Unless we use event data TRBs, which are a
@@ -1365,7 +1475,7 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	struct xhci_generic_trb *start_trb;
 	bool first_trb;
 	int start_cycle;
-	u32 field;
+	u32 field, length_field;
 
 	int running_total, trb_buff_len, ret;
 	u64 addr;
@@ -1443,10 +1553,13 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 			td->last_trb = ep_ring->enqueue;
 			field |= TRB_IOC;
 		}
+		length_field = TRB_LEN(trb_buff_len) |
+			TD_REMAINDER(urb->transfer_buffer_length - running_total) |
+			TRB_INTR_TARGET(0);
 		queue_trb(xhci, ep_ring, false,
-				(u32) addr,
-				(u32) ((u64) addr >> 32),
-				TRB_LEN(trb_buff_len) | TRB_INTR_TARGET(0),
+				lower_32_bits(addr),
+				upper_32_bits(addr),
+				length_field,
 				/* We always want to know if the TRB was short,
 				 * or we won't get an event when it completes.
 				 * (Unless we use event data TRBs, which are a
@@ -1478,7 +1591,7 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 	struct usb_ctrlrequest *setup;
 	struct xhci_generic_trb *start_trb;
 	int start_cycle;
-	u32 field;
+	u32 field, length_field;
 	struct xhci_td *td;
 
 	ep_ring = xhci->devs[slot_id]->ep_rings[ep_index];
@@ -1528,13 +1641,16 @@ int xhci_queue_ctrl_tx(struct xhci_hcd *xhci, gfp_t mem_flags,
 
 	/* If there's data, queue data TRBs */
 	field = 0;
+	length_field = TRB_LEN(urb->transfer_buffer_length) |
+		TD_REMAINDER(urb->transfer_buffer_length) |
+		TRB_INTR_TARGET(0);
 	if (urb->transfer_buffer_length > 0) {
 		if (setup->bRequestType & USB_DIR_IN)
 			field |= TRB_DIR_IN;
 		queue_trb(xhci, ep_ring, false,
 				lower_32_bits(urb->transfer_dma),
 				upper_32_bits(urb->transfer_dma),
-				TRB_LEN(urb->transfer_buffer_length) | TRB_INTR_TARGET(0),
+				length_field,
 				/* Event on short tx */
 				field | TRB_ISP | TRB_TYPE(TRB_DATA) | ep_ring->cycle_state);
 	}
@@ -1603,7 +1719,8 @@ int xhci_queue_slot_control(struct xhci_hcd *xhci, u32 trb_type, u32 slot_id)
 int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 		u32 slot_id)
 {
-	return queue_command(xhci, in_ctx_ptr, 0, 0,
+	return queue_command(xhci, lower_32_bits(in_ctx_ptr),
+			upper_32_bits(in_ctx_ptr), 0,
 			TRB_TYPE(TRB_ADDR_DEV) | SLOT_ID_FOR_TRB(slot_id));
 }
 
@@ -1611,7 +1728,8 @@ int xhci_queue_address_device(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 		u32 slot_id)
 {
-	return queue_command(xhci, in_ctx_ptr, 0, 0,
+	return queue_command(xhci, lower_32_bits(in_ctx_ptr),
+			upper_32_bits(in_ctx_ptr), 0,
 			TRB_TYPE(TRB_CONFIG_EP) | SLOT_ID_FOR_TRB(slot_id));
 }
 
@@ -1639,10 +1757,23 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id,
 	u32 type = TRB_TYPE(TRB_SET_DEQ);
 
 	addr = xhci_trb_virt_to_dma(deq_seg, deq_ptr);
-	if (addr == 0)
+	if (addr == 0) {
 		xhci_warn(xhci, "WARN Cannot submit Set TR Deq Ptr\n");
 		xhci_warn(xhci, "WARN deq seg = %p, deq pt = %p\n",
 				deq_seg, deq_ptr);
-	return queue_command(xhci, (u32) addr | cycle_state, 0, 0,
+		return 0;
+	}
+	return queue_command(xhci, lower_32_bits(addr) | cycle_state,
+			upper_32_bits(addr), 0,
 			trb_slot_id | trb_ep_index | type);
 }
+
+int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
+		unsigned int ep_index)
+{
+	u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id);
+	u32 trb_ep_index = EP_ID_FOR_TRB(ep_index);
+	u32 type = TRB_TYPE(TRB_RESET_EP);
+
+	return queue_command(xhci, 0, 0, 0, trb_slot_id | trb_ep_index | type);
+}
diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h
index 8936eeb..d31d322 100644
--- a/drivers/usb/host/xhci.h
+++ b/drivers/usb/host/xhci.h
@@ -25,6 +25,7 @@
 
 #include <linux/usb.h>
 #include <linux/timer.h>
+#include <linux/kernel.h>
 
 #include "../core/hcd.h"
 /* Code sharing between pci-quirks and xhci hcd */
@@ -42,14 +43,6 @@
  * xHCI register interface.
  * This corresponds to the eXtensible Host Controller Interface (xHCI)
  * Revision 0.95 specification
- *
- * Registers should always be accessed with double word or quad word accesses.
- *
- * Some xHCI implementations may support 64-bit address pointers.  Registers
- * with 64-bit address pointers should be written to with dword accesses by
- * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
- * xHCI implementations that do not support 64-bit address pointers will ignore
- * the high dword, and write order is irrelevant.
  */
 
 /**
@@ -96,6 +89,7 @@ struct xhci_cap_regs {
 #define HCS_ERST_MAX(p)		(((p) >> 4) & 0xf)
 /* bit 26 Scratchpad restore - for save/restore HW state - not used yet */
 /* bits 27:31 number of Scratchpad buffers SW must allocate for the HW */
+#define HCS_MAX_SCRATCHPAD(p)   (((p) >> 27) & 0x1f)
 
 /* HCSPARAMS3 - hcs_params3 - bitmasks */
 /* bits 0:7, Max U1 to U0 latency for the roothub ports */
@@ -166,10 +160,10 @@ struct xhci_op_regs {
 	u32	reserved1;
 	u32	reserved2;
 	u32	dev_notification;
-	u32	cmd_ring[2];
+	u64	cmd_ring;
 	/* rsvd: offset 0x20-2F */
 	u32	reserved3[4];
-	u32	dcbaa_ptr[2];
+	u64	dcbaa_ptr;
 	u32	config_reg;
 	/* rsvd: offset 0x3C-3FF */
 	u32	reserved4[241];
@@ -254,7 +248,7 @@ struct xhci_op_regs {
 #define CMD_RING_RUNNING	(1 << 3)
 /* bits 4:5 reserved and should be preserved */
 /* Command Ring pointer - bit mask for the lower 32 bits. */
-#define CMD_RING_ADDR_MASK	(0xffffffc0)
+#define CMD_RING_RSVD_BITS	(0x3f)
 
 /* CONFIG - Configure Register - config_reg bitmasks */
 /* bits 0:7 - maximum number of device slots enabled (NumSlotsEn) */
@@ -382,8 +376,8 @@ struct xhci_intr_reg {
 	u32	irq_control;
 	u32	erst_size;
 	u32	rsvd;
-	u32	erst_base[2];
-	u32	erst_dequeue[2];
+	u64	erst_base;
+	u64	erst_dequeue;
 };
 
 /* irq_pending bitmasks */
@@ -453,6 +447,27 @@ struct xhci_doorbell_array {
 
 
 /**
+ * struct xhci_container_ctx
+ * @type: Type of context.  Used to calculated offsets to contained contexts.
+ * @size: Size of the context data
+ * @bytes: The raw context data given to HW
+ * @dma: dma address of the bytes
+ *
+ * Represents either a Device or Input context.  Holds a pointer to the raw
+ * memory used for the context (bytes) and dma address of it (dma).
+ */
+struct xhci_container_ctx {
+	unsigned type;
+#define XHCI_CTX_TYPE_DEVICE  0x1
+#define XHCI_CTX_TYPE_INPUT   0x2
+
+	int size;
+
+	u8 *bytes;
+	dma_addr_t dma;
+};
+
+/**
  * struct xhci_slot_ctx
  * @dev_info:	Route string, device speed, hub info, and last valid endpoint
  * @dev_info2:	Max exit latency for device number, root hub port number
@@ -538,7 +553,7 @@ struct xhci_slot_ctx {
 struct xhci_ep_ctx {
 	u32	ep_info;
 	u32	ep_info2;
-	u32	deq[2];
+	u64	deq;
 	u32	tx_info;
 	/* offset 0x14 - 0x1f reserved for HC internal use */
 	u32	reserved[3];
@@ -589,18 +604,16 @@ struct xhci_ep_ctx {
 
 
 /**
- * struct xhci_device_control
- * Input/Output context; see section 6.2.5.
+ * struct xhci_input_control_context
+ * Input control context; see section 6.2.5.
  *
  * @drop_context:	set the bit of the endpoint context you want to disable
  * @add_context:	set the bit of the endpoint context you want to enable
  */
-struct xhci_device_control {
+struct xhci_input_control_ctx {
 	u32	drop_flags;
 	u32	add_flags;
-	u32	rsvd[6];
-	struct xhci_slot_ctx	slot;
-	struct xhci_ep_ctx	ep[31];
+	u32	rsvd2[6];
 };
 
 /* drop context bitmasks */
@@ -608,7 +621,6 @@ struct xhci_device_control {
 /* add context bitmasks */
 #define	ADD_EP(x)	(0x1 << x)
 
-
 struct xhci_virt_device {
 	/*
 	 * Commands to the hardware are passed an "input context" that
@@ -618,11 +630,10 @@ struct xhci_virt_device {
 	 * track of input and output contexts separately because
 	 * these commands might fail and we don't trust the hardware.
 	 */
-	struct xhci_device_control	*out_ctx;
-	dma_addr_t			out_ctx_dma;
+	struct xhci_container_ctx       *out_ctx;
 	/* Used for addressing devices and configuration changes */
-	struct xhci_device_control	*in_ctx;
-	dma_addr_t			in_ctx_dma;
+	struct xhci_container_ctx       *in_ctx;
+
 	/* FIXME when stream support is added */
 	struct xhci_ring		*ep_rings[31];
 	/* Temporary storage in case the configure endpoint command fails and we
@@ -641,7 +652,7 @@ struct xhci_virt_device {
  */
 struct xhci_device_context_array {
 	/* 64-bit device addresses; we only write 32-bit addresses */
-	u32			dev_context_ptrs[2*MAX_HC_SLOTS];
+	u64			dev_context_ptrs[MAX_HC_SLOTS];
 	/* private xHCD pointers */
 	dma_addr_t	dma;
 };
@@ -654,7 +665,7 @@ struct xhci_device_context_array {
 
 struct xhci_stream_ctx {
 	/* 64-bit stream ring address, cycle state, and stream type */
-	u32	stream_ring[2];
+	u64	stream_ring;
 	/* offset 0x14 - 0x1f reserved for HC internal use */
 	u32	reserved[2];
 };
@@ -662,7 +673,7 @@ struct xhci_stream_ctx {
 
 struct xhci_transfer_event {
 	/* 64-bit buffer address, or immediate data */
-	u32	buffer[2];
+	u64	buffer;
 	u32	transfer_len;
 	/* This field is interpreted differently based on the type of TRB */
 	u32	flags;
@@ -744,7 +755,7 @@ struct xhci_transfer_event {
 
 struct xhci_link_trb {
 	/* 64-bit segment pointer*/
-	u32 segment_ptr[2];
+	u64 segment_ptr;
 	u32 intr_target;
 	u32 control;
 };
@@ -755,7 +766,7 @@ struct xhci_link_trb {
 /* Command completion event TRB */
 struct xhci_event_cmd {
 	/* Pointer to command TRB, or the value passed by the event data trb */
-	u32 cmd_trb[2];
+	u64 cmd_trb;
 	u32 status;
 	u32 flags;
 };
@@ -848,8 +859,8 @@ union xhci_trb {
 #define TRB_CONFIG_EP		12
 /* Evaluate Context Command */
 #define TRB_EVAL_CONTEXT	13
-/* Reset Transfer Ring Command */
-#define TRB_RESET_RING		14
+/* Reset Endpoint Command */
+#define TRB_RESET_EP		14
 /* Stop Transfer Ring Command */
 #define TRB_STOP_RING		15
 /* Set Transfer Ring Dequeue Pointer Command */
@@ -929,6 +940,7 @@ struct xhci_ring {
 	unsigned int		cancels_pending;
 	unsigned int		state;
 #define SET_DEQ_PENDING		(1 << 0)
+#define EP_HALTED		(1 << 1)
 	/* The TRB that was last reported in a stopped endpoint ring */
 	union xhci_trb		*stopped_trb;
 	struct xhci_td		*stopped_td;
@@ -940,9 +952,15 @@ struct xhci_ring {
 	u32			cycle_state;
 };
 
+struct xhci_dequeue_state {
+	struct xhci_segment *new_deq_seg;
+	union xhci_trb *new_deq_ptr;
+	int new_cycle_state;
+};
+
 struct xhci_erst_entry {
 	/* 64-bit event ring segment address */
-	u32	seg_addr[2];
+	u64	seg_addr;
 	u32	seg_size;
 	/* Set to zero */
 	u32	rsvd;
@@ -957,6 +975,13 @@ struct xhci_erst {
 	unsigned int		erst_size;
 };
 
+struct xhci_scratchpad {
+	u64 *sp_array;
+	dma_addr_t sp_dma;
+	void **sp_buffers;
+	dma_addr_t *sp_dma_buffers;
+};
+
 /*
  * Each segment table entry is 4*32bits long.  1K seems like an ok size:
  * (1K bytes * 8bytes/bit) / (4*32 bits) = 64 segment entries in the table,
@@ -1011,6 +1036,9 @@ struct xhci_hcd {
 	struct xhci_ring	*cmd_ring;
 	struct xhci_ring	*event_ring;
 	struct xhci_erst	erst;
+	/* Scratchpad */
+	struct xhci_scratchpad  *scratchpad;
+
 	/* slot enabling and address device helpers */
 	struct completion	addr_dev;
 	int slot_id;
@@ -1071,13 +1099,43 @@ static inline unsigned int xhci_readl(const struct xhci_hcd *xhci,
 static inline void xhci_writel(struct xhci_hcd *xhci,
 		const unsigned int val, __u32 __iomem *regs)
 {
-	if (!in_interrupt())
-		xhci_dbg(xhci,
-			 "`MEM_WRITE_DWORD(3'b000, 32'h%p, 32'h%0x, 4'hf);\n",
-			 regs, val);
+	xhci_dbg(xhci,
+			"`MEM_WRITE_DWORD(3'b000, 32'h%p, 32'h%0x, 4'hf);\n",
+			regs, val);
 	writel(val, regs);
 }
 
+/*
+ * Registers should always be accessed with double word or quad word accesses.
+ *
+ * Some xHCI implementations may support 64-bit address pointers.  Registers
+ * with 64-bit address pointers should be written to with dword accesses by
+ * writing the low dword first (ptr[0]), then the high dword (ptr[1]) second.
+ * xHCI implementations that do not support 64-bit address pointers will ignore
+ * the high dword, and write order is irrelevant.
+ */
+static inline u64 xhci_read_64(const struct xhci_hcd *xhci,
+		__u64 __iomem *regs)
+{
+	__u32 __iomem *ptr = (__u32 __iomem *) regs;
+	u64 val_lo = readl(ptr);
+	u64 val_hi = readl(ptr + 1);
+	return val_lo + (val_hi << 32);
+}
+static inline void xhci_write_64(struct xhci_hcd *xhci,
+		const u64 val, __u64 __iomem *regs)
+{
+	__u32 __iomem *ptr = (__u32 __iomem *) regs;
+	u32 val_lo = lower_32_bits(val);
+	u32 val_hi = upper_32_bits(val);
+
+	xhci_dbg(xhci,
+			"`MEM_WRITE_DWORD(3'b000, 64'h%p, 64'h%0lx, 4'hf);\n",
+			regs, (long unsigned int) val);
+	writel(val_lo, ptr);
+	writel(val_hi, ptr + 1);
+}
+
 /* xHCI debugging */
 void xhci_print_ir_set(struct xhci_hcd *xhci, struct xhci_intr_reg *ir_set, int set_num);
 void xhci_print_registers(struct xhci_hcd *xhci);
@@ -1090,7 +1148,7 @@ void xhci_debug_ring(struct xhci_hcd *xhci, struct xhci_ring *ring);
 void xhci_dbg_erst(struct xhci_hcd *xhci, struct xhci_erst *erst);
 void xhci_dbg_cmd_ptrs(struct xhci_hcd *xhci);
 void xhci_dbg_ring_ptrs(struct xhci_hcd *xhci, struct xhci_ring *ring);
-void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_device_control *ctx, dma_addr_t dma, unsigned int last_ep);
+void xhci_dbg_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int last_ep);
 
 /* xHCI memory managment */
 void xhci_mem_cleanup(struct xhci_hcd *xhci);
@@ -1128,6 +1186,7 @@ int xhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, gfp_t mem_flags);
 int xhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status);
 int xhci_add_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
 int xhci_drop_endpoint(struct usb_hcd *hcd, struct usb_device *udev, struct usb_host_endpoint *ep);
+void xhci_endpoint_reset(struct usb_hcd *hcd, struct usb_host_endpoint *ep);
 int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
 void xhci_reset_bandwidth(struct usb_hcd *hcd, struct usb_device *udev);
 
@@ -1148,10 +1207,23 @@ int xhci_queue_bulk_tx(struct xhci_hcd *xhci, gfp_t mem_flags, struct urb *urb,
 		int slot_id, unsigned int ep_index);
 int xhci_queue_configure_endpoint(struct xhci_hcd *xhci, dma_addr_t in_ctx_ptr,
 		u32 slot_id);
+int xhci_queue_reset_ep(struct xhci_hcd *xhci, int slot_id,
+		unsigned int ep_index);
+void xhci_find_new_dequeue_state(struct xhci_hcd *xhci,
+		unsigned int slot_id, unsigned int ep_index,
+		struct xhci_td *cur_td, struct xhci_dequeue_state *state);
+void xhci_queue_new_dequeue_state(struct xhci_hcd *xhci,
+		struct xhci_ring *ep_ring, unsigned int slot_id,
+		unsigned int ep_index, struct xhci_dequeue_state *deq_state);
 
 /* xHCI roothub code */
 int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
 		char *buf, u16 wLength);
 int xhci_hub_status_data(struct usb_hcd *hcd, char *buf);
 
+/* xHCI contexts */
+struct xhci_input_control_ctx *xhci_get_input_control_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
+struct xhci_slot_ctx *xhci_get_slot_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx);
+struct xhci_ep_ctx *xhci_get_ep_ctx(struct xhci_hcd *xhci, struct xhci_container_ctx *ctx, unsigned int ep_index);
+
 #endif /* __LINUX_XHCI_HCD_H */
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index a68d91a..abe3aa6 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -220,7 +220,7 @@ config USB_IOWARRIOR
 
 config USB_TEST
 	tristate "USB testing driver"
-	depends on USB && USB_DEVICEFS
+	depends on USB
 	help
 	  This driver is for testing host controller software.  It is used
 	  with specialized device firmware for regression and stress testing,
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 554a414..c7c1ca0 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -1326,7 +1326,6 @@ static int __init musb_core_init(u16 musb_type, struct musb *musb)
 	int		i;
 
 	/* log core options (read using indexed model) */
-	musb_ep_select(mbase, 0);
 	reg = musb_read_configdata(mbase);
 
 	strcpy(aInfo, (reg & MUSB_CONFIGDATA_UTMIDW) ? "UTMI-16" : "UTMI-8");
@@ -1990,7 +1989,7 @@ bad_config:
 	if (status < 0)
 		goto fail2;
 
-#ifdef CONFIG_USB_OTG
+#ifdef CONFIG_USB_MUSB_OTG
 	setup_timer(&musb->otg_timer, musb_otg_timer_func, (unsigned long) musb);
 #endif
 
diff --git a/drivers/usb/musb/musb_gadget_ep0.c b/drivers/usb/musb/musb_gadget_ep0.c
index 40ed50e..7a67786 100644
--- a/drivers/usb/musb/musb_gadget_ep0.c
+++ b/drivers/usb/musb/musb_gadget_ep0.c
@@ -407,7 +407,7 @@ stall:
 					csr |= MUSB_RXCSR_P_SENDSTALL
 						| MUSB_RXCSR_FLUSHFIFO
 						| MUSB_RXCSR_CLRDATATOG
-						| MUSB_TXCSR_P_WZC_BITS;
+						| MUSB_RXCSR_P_WZC_BITS;
 					musb_writew(regs, MUSB_RXCSR,
 							csr);
 				}
diff --git a/drivers/usb/musb/musb_regs.h b/drivers/usb/musb/musb_regs.h
index de3b2f1..fbfd3fd 100644
--- a/drivers/usb/musb/musb_regs.h
+++ b/drivers/usb/musb/musb_regs.h
@@ -323,6 +323,7 @@ static inline void  musb_write_rxfifoadd(void __iomem *mbase, u16 c_off)
 
 static inline u8 musb_read_configdata(void __iomem *mbase)
 {
+	musb_writeb(mbase, MUSB_INDEX, 0);
 	return musb_readb(mbase, 0x10 + MUSB_CONFIGDATA);
 }
 
diff --git a/drivers/usb/serial/cp210x.c b/drivers/usb/serial/cp210x.c
index e9a40b8..985cbcf 100644
--- a/drivers/usb/serial/cp210x.c
+++ b/drivers/usb/serial/cp210x.c
@@ -80,6 +80,7 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
 	{ USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
 	{ USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
+	{ USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
 	{ USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
 	{ USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
 	{ USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
@@ -96,7 +97,9 @@ static struct usb_device_id id_table [] = {
 	{ USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */
 	{ USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
 	{ USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
+	{ USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
 	{ USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
+	{ USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
 	{ USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
 	{ USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
 	{ USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 60c64cc..b574878 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -698,6 +698,7 @@ static struct usb_device_id id_table_combined [] = {
 	{ USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
 		.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
 	{ USB_DEVICE(LARSENBRUSGAARD_VID, LB_ALTITRACK_PID) },
+	{ USB_DEVICE(GN_OTOMETRICS_VID, AURICAL_USB_PID) },
 	{ },					/* Optional parameter entry */
 	{ }					/* Terminating entry */
 };
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index c9fbd74..24dbd99 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -947,6 +947,13 @@
 #define FTDI_TURTELIZER_PID	0xBDC8 /* JTAG/RS-232 adapter by egnite GmBH */
 
 /*
+ * GN Otometrics (http://www.otometrics.com)
+ * Submitted by Ville Sundberg.
+ */
+#define GN_OTOMETRICS_VID	0x0c33	/* Vendor ID */
+#define AURICAL_USB_PID		0x0010	/* Aurical USB Audiometer */
+
+/*
  *   BmRequestType:  1100 0000b
  *   bRequest:       FTDI_E2_READ
  *   wValue:         0
diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c
index c31940a..270009a 100644
--- a/drivers/usb/serial/mos7840.c
+++ b/drivers/usb/serial/mos7840.c
@@ -124,10 +124,13 @@
 #define BANDB_DEVICE_ID_USOPTL4_4       0xAC44
 #define BANDB_DEVICE_ID_USOPTL4_2       0xAC42
 
-/* This driver also supports the ATEN UC2324 device since it is mos7840 based
- *  - if I knew the device id it would also support the ATEN UC2322 */
+/* This driver also supports
+ * ATEN UC2324 device using Moschip MCS7840
+ * ATEN UC2322 device using Moschip MCS7820
+ */
 #define USB_VENDOR_ID_ATENINTL		0x0557
 #define ATENINTL_DEVICE_ID_UC2324	0x2011
+#define ATENINTL_DEVICE_ID_UC2322	0x7820
 
 /* Interrupt Routine Defines    */
 
@@ -177,6 +180,7 @@ static struct usb_device_id moschip_port_id_table[] = {
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
+	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
 	{}			/* terminating entry */
 };
 
@@ -186,6 +190,7 @@ static __devinitdata struct usb_device_id moschip_id_table_combined[] = {
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_4)},
 	{USB_DEVICE(USB_VENDOR_ID_BANDB, BANDB_DEVICE_ID_USOPTL4_2)},
 	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2324)},
+	{USB_DEVICE(USB_VENDOR_ID_ATENINTL, ATENINTL_DEVICE_ID_UC2322)},
 	{}			/* terminating entry */
 };
 
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index 98262dd..c784ddb 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -66,8 +66,10 @@ static int  option_tiocmget(struct tty_struct *tty, struct file *file);
 static int  option_tiocmset(struct tty_struct *tty, struct file *file,
 				unsigned int set, unsigned int clear);
 static int  option_send_setup(struct usb_serial_port *port);
+#ifdef CONFIG_PM
 static int  option_suspend(struct usb_serial *serial, pm_message_t message);
 static int  option_resume(struct usb_serial *serial);
+#endif
 
 /* Vendor and product IDs */
 #define OPTION_VENDOR_ID			0x0AF0
@@ -205,6 +207,7 @@ static int  option_resume(struct usb_serial *serial);
 #define NOVATELWIRELESS_PRODUCT_MC727		0x4100
 #define NOVATELWIRELESS_PRODUCT_MC950D		0x4400
 #define NOVATELWIRELESS_PRODUCT_U727		0x5010
+#define NOVATELWIRELESS_PRODUCT_MC727_NEW	0x5100
 #define NOVATELWIRELESS_PRODUCT_MC760		0x6000
 #define NOVATELWIRELESS_PRODUCT_OVMC760		0x6002
 
@@ -259,11 +262,6 @@ static int  option_resume(struct usb_serial *serial);
 #define AXESSTEL_VENDOR_ID			0x1726
 #define AXESSTEL_PRODUCT_MV110H			0x1000
 
-#define ONDA_VENDOR_ID				0x19d2
-#define ONDA_PRODUCT_MSA501HS			0x0001
-#define ONDA_PRODUCT_ET502HS			0x0002
-#define ONDA_PRODUCT_MT503HS			0x2000
-
 #define BANDRICH_VENDOR_ID			0x1A8D
 #define BANDRICH_PRODUCT_C100_1			0x1002
 #define BANDRICH_PRODUCT_C100_2			0x1003
@@ -301,6 +299,7 @@ static int  option_resume(struct usb_serial *serial);
 #define ZTE_PRODUCT_MF628			0x0015
 #define ZTE_PRODUCT_MF626			0x0031
 #define ZTE_PRODUCT_CDMA_TECH			0xfffe
+#define ZTE_PRODUCT_AC8710			0xfff1
 
 #define BENQ_VENDOR_ID				0x04a5
 #define BENQ_PRODUCT_H10			0x4068
@@ -322,6 +321,11 @@ static int  option_resume(struct usb_serial *serial);
 #define ALINK_VENDOR_ID				0x1e0e
 #define ALINK_PRODUCT_3GU			0x9200
 
+/* ALCATEL PRODUCTS */
+#define ALCATEL_VENDOR_ID			0x1bbb
+#define ALCATEL_PRODUCT_X060S			0x0000
+
+
 static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
 	{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -438,6 +442,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_EU870D) }, /* Novatel EU850D/EU860D/EU870D */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC950D) }, /* Novatel MC930D/MC950D */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727) }, /* Novatel MC727/U727/USB727 */
+	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC727_NEW) }, /* Novatel MC727/U727/USB727 refresh */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_U727) }, /* Novatel MC727/U727/USB727 */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_MC760) }, /* Novatel MC760/U760/USB760 */
 	{ USB_DEVICE(NOVATELWIRELESS_VENDOR_ID, NOVATELWIRELESS_PRODUCT_OVMC760) }, /* Novatel Ovation MC760 */
@@ -474,42 +479,6 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_500A) },
 	{ USB_DEVICE(ANYDATA_VENDOR_ID, ANYDATA_PRODUCT_ADU_620UW) },
 	{ USB_DEVICE(AXESSTEL_VENDOR_ID, AXESSTEL_PRODUCT_MV110H) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MSA501HS) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_ET502HS) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0003) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0004) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0005) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0006) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0007) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0008) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0009) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x000a) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x000b) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x000c) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x000d) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x000e) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x000f) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0010) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0011) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0012) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0013) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0014) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0015) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0016) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0017) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0018) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0019) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0020) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0021) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0022) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0023) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0024) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0025) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0026) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0027) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0028) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, 0x0029) },
-	{ USB_DEVICE(ONDA_VENDOR_ID, ONDA_PRODUCT_MT503HS) },
 	{ USB_DEVICE(YISO_VENDOR_ID, YISO_PRODUCT_U893) },
 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_1) },
 	{ USB_DEVICE(BANDRICH_VENDOR_ID, BANDRICH_PRODUCT_C100_2) },
@@ -534,10 +503,75 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(QUALCOMM_VENDOR_ID, 0x6613)}, /* Onda H600/ZTE MF330 */
 	{ USB_DEVICE(MAXON_VENDOR_ID, 0x6280) }, /* BP3-USB & BP3-EXT HSDPA */
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_UC864E) },
-	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622) },
-	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626) },
-	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
-	{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF622, 0xff, 0xff, 0xff) }, /* ZTE WCDMA products */
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0002, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0003, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0004, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0005, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0006, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0007, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0008, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0009, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000a, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000b, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000c, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000d, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000e, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x000f, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0010, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0011, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0012, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0013, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0016, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0017, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0018, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0019, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0020, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0021, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0022, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0023, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0024, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0025, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0026, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0028, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0029, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0030, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0032, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0033, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0037, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0039, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0042, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0043, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0048, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0049, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0051, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0052, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0054, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0055, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0057, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0058, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0061, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0062, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0063, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0064, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0066, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0069, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0076, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0078, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0082, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0086, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2002, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x2003, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0014, 0xff, 0xff, 0xff) }, /* ZTE CDMA products */
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0027, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0059, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0060, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0070, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, 0x0073, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE_AND_INTERFACE_INFO(ZTE_VENDOR_ID, ZTE_PRODUCT_AC8710, 0xff, 0xff, 0xff) },
 	{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
 	{ USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
 	{ USB_DEVICE(QISDA_VENDOR_ID, QISDA_PRODUCT_H21_4512) },
@@ -547,6 +581,7 @@ static struct usb_device_id option_ids[] = {
 	{ USB_DEVICE(TOSHIBA_VENDOR_ID, TOSHIBA_PRODUCT_HSDPA_MINICARD ) }, /* Toshiba 3G HSDPA == Novatel Expedite EU870D MiniCard */
 	{ USB_DEVICE(ALINK_VENDOR_ID, 0x9000) },
 	{ USB_DEVICE_AND_INTERFACE_INFO(ALINK_VENDOR_ID, ALINK_PRODUCT_3GU, 0xff, 0xff, 0xff) },
+	{ USB_DEVICE(ALCATEL_VENDOR_ID, ALCATEL_PRODUCT_X060S) },
 	{ } /* Terminating entry */
 };
 MODULE_DEVICE_TABLE(usb, option_ids);
@@ -555,8 +590,10 @@ static struct usb_driver option_driver = {
 	.name       = "option",
 	.probe      = usb_serial_probe,
 	.disconnect = usb_serial_disconnect,
+#ifdef CONFIG_PM
 	.suspend    = usb_serial_suspend,
 	.resume     = usb_serial_resume,
+#endif
 	.id_table   = option_ids,
 	.no_dynamic_id = 	1,
 };
@@ -588,8 +625,10 @@ static struct usb_serial_driver option_1port_device = {
 	.disconnect        = option_disconnect,
 	.release           = option_release,
 	.read_int_callback = option_instat_callback,
+#ifdef CONFIG_PM
 	.suspend           = option_suspend,
 	.resume            = option_resume,
+#endif
 };
 
 static int debug;
@@ -831,7 +870,6 @@ static void option_instat_callback(struct urb *urb)
 	int status = urb->status;
 	struct usb_serial_port *port =  urb->context;
 	struct option_port_private *portdata = usb_get_serial_port_data(port);
-	struct usb_serial *serial = port->serial;
 
 	dbg("%s", __func__);
 	dbg("%s: urb %p port %p has data %p", __func__, urb, port, portdata);
@@ -927,7 +965,6 @@ static int option_open(struct tty_struct *tty,
 			struct usb_serial_port *port, struct file *filp)
 {
 	struct option_port_private *portdata;
-	struct usb_serial *serial = port->serial;
 	int i, err;
 	struct urb *urb;
 
@@ -1187,6 +1224,7 @@ static void option_release(struct usb_serial *serial)
 	}
 }
 
+#ifdef CONFIG_PM
 static int option_suspend(struct usb_serial *serial, pm_message_t message)
 {
 	dbg("%s entered", __func__);
@@ -1245,6 +1283,7 @@ static int option_resume(struct usb_serial *serial)
 	}
 	return 0;
 }
+#endif
 
 MODULE_AUTHOR(DRIVER_AUTHOR);
 MODULE_DESCRIPTION(DRIVER_DESC);
diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c
index bd7581b..99188c9 100644
--- a/drivers/usb/serial/usb-serial.c
+++ b/drivers/usb/serial/usb-serial.c
@@ -32,6 +32,7 @@
 #include <linux/mutex.h>
 #include <linux/list.h>
 #include <linux/uaccess.h>
+#include <linux/serial.h>
 #include <linux/usb.h>
 #include <linux/usb/serial.h>
 #include "pl2303.h"
@@ -184,6 +185,7 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
 	struct usb_serial_port *port;
 	unsigned int portNumber;
 	int retval = 0;
+	int first = 0;
 
 	dbg("%s", __func__);
 
@@ -223,7 +225,7 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
 
 	/* If the console is attached, the device is already open */
 	if (port->port.count == 1 && !port->console) {
-
+		first = 1;
 		/* lock this module before we call it
 		 * this may fail, which means we must bail out,
 		 * safe because we are called with BKL held */
@@ -246,13 +248,21 @@ static int serial_open (struct tty_struct *tty, struct file *filp)
 		if (retval)
 			goto bailout_interface_put;
 		mutex_unlock(&serial->disc_mutex);
+		set_bit(ASYNCB_INITIALIZED, &port->port.flags);
 	}
 	mutex_unlock(&port->mutex);
 	/* Now do the correct tty layer semantics */
 	retval = tty_port_block_til_ready(&port->port, tty, filp);
-	if (retval == 0)
+	if (retval == 0) {
+		if (!first)
+			usb_serial_put(serial);
 		return 0;
-
+	}
+	mutex_lock(&port->mutex);
+	if (first == 0)
+		goto bailout_mutex_unlock;
+	/* Undo the initial port actions */
+	mutex_lock(&serial->disc_mutex);
 bailout_interface_put:
 	usb_autopm_put_interface(serial->interface);
 bailout_module_put:
@@ -340,6 +350,22 @@ static void serial_close(struct tty_struct *tty, struct file *filp)
 
 	dbg("%s - port %d", __func__, port->number);
 
+	/* FIXME:
+	   This leaves a very narrow race. Really we should do the
+	   serial_do_free() on tty->shutdown(), but tty->shutdown can
+	   be called from IRQ context and serial_do_free can sleep.
+
+	   The right fix is probably to make the tty free (which is rare)
+	   and thus tty->shutdown() occur via a work queue and simplify all
+	   the drivers that use it.
+	*/
+	if (tty_hung_up_p(filp)) {
+		/* serial_hangup already called serial_down at this point.
+		   Another user may have already reopened the port but
+		   serial_do_free is refcounted */
+		serial_do_free(port);
+		return;
+	}
 
 	if (tty_port_close_start(&port->port, tty, filp) == 0)
 		return;
@@ -355,7 +381,8 @@ static void serial_hangup(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	serial_do_down(port);
 	tty_port_hangup(&port->port);
-	serial_do_free(port);
+	/* We must not free port yet - the USB serial layer depends on it's
+	   continued existence */
 }
 
 static int serial_write(struct tty_struct *tty, const unsigned char *buf,
@@ -394,7 +421,6 @@ static int serial_chars_in_buffer(struct tty_struct *tty)
 	struct usb_serial_port *port = tty->driver_data;
 	dbg("%s = port %d", __func__, port->number);
 
-	WARN_ON(!port->port.count);
 	/* if the device was unplugged then any remaining characters
 	   fell out of the connector ;) */
 	if (port->serial->disconnected)
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index fcb3202..e20dc52 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -961,7 +961,7 @@ int usb_stor_Bulk_max_lun(struct us_data *us)
 				 US_BULK_GET_MAX_LUN, 
 				 USB_DIR_IN | USB_TYPE_CLASS | 
 				 USB_RECIP_INTERFACE,
-				 0, us->ifnum, us->iobuf, 1, HZ);
+				 0, us->ifnum, us->iobuf, 1, 10*HZ);
 
 	US_DEBUGP("GetMaxLUN command result is %d, data is %d\n", 
 		  result, us->iobuf[0]);
diff --git a/drivers/video/backlight/jornada720_bl.c b/drivers/video/backlight/jornada720_bl.c
index c3ebb6b..7aed256 100644
--- a/drivers/video/backlight/jornada720_bl.c
+++ b/drivers/video/backlight/jornada720_bl.c
@@ -72,7 +72,7 @@ static int jornada_bl_update_status(struct backlight_device *bd)
 		if (jornada_ssp_byte(SETBRIGHTNESS) != TXDUMMY) {
 			printk(KERN_INFO "bl : failed to set brightness\n");
 			ret = -ETIMEDOUT;
-			goto out
+			goto out;
 		}
 
 		/* at this point we expect that the mcu has accepted
diff --git a/drivers/video/s3c-fb.c b/drivers/video/s3c-fb.c
index bb63c07..5a72083 100644
--- a/drivers/video/s3c-fb.c
+++ b/drivers/video/s3c-fb.c
@@ -964,7 +964,7 @@ static int __devexit s3c_fb_remove(struct platform_device *pdev)
 	struct s3c_fb *sfb = platform_get_drvdata(pdev);
 	int win;
 
-	for (win = 0; win <= S3C_FB_MAX_WIN; win++)
+	for (win = 0; win < S3C_FB_MAX_WIN; win++)
 		if (sfb->windows[win])
 			s3c_fb_release_win(sfb, sfb->windows[win]);
 
@@ -988,7 +988,7 @@ static int s3c_fb_suspend(struct platform_device *pdev, pm_message_t state)
 	struct s3c_fb_win *win;
 	int win_no;
 
-	for (win_no = S3C_FB_MAX_WIN; win_no >= 0; win_no--) {
+	for (win_no = S3C_FB_MAX_WIN - 1; win_no >= 0; win_no--) {
 		win = sfb->windows[win_no];
 		if (!win)
 			continue;
diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c
index bcec78f..248e00e 100644
--- a/drivers/virtio/virtio_pci.c
+++ b/drivers/virtio/virtio_pci.c
@@ -52,8 +52,10 @@ struct virtio_pci_device
 	char (*msix_names)[256];
 	/* Number of available vectors */
 	unsigned msix_vectors;
-	/* Vectors allocated */
+	/* Vectors allocated, excluding per-vq vectors if any */
 	unsigned msix_used_vectors;
+	/* Whether we have vector per vq */
+	bool per_vq_vectors;
 };
 
 /* Constants for MSI-X */
@@ -258,7 +260,6 @@ static void vp_free_vectors(struct virtio_device *vdev)
 
 	for (i = 0; i < vp_dev->msix_used_vectors; ++i)
 		free_irq(vp_dev->msix_entries[i].vector, vp_dev);
-	vp_dev->msix_used_vectors = 0;
 
 	if (vp_dev->msix_enabled) {
 		/* Disable the vector used for configuration */
@@ -267,80 +268,77 @@ static void vp_free_vectors(struct virtio_device *vdev)
 		/* Flush the write out to device */
 		ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
 
-		vp_dev->msix_enabled = 0;
 		pci_disable_msix(vp_dev->pci_dev);
+		vp_dev->msix_enabled = 0;
+		vp_dev->msix_vectors = 0;
 	}
-}
 
-static int vp_enable_msix(struct pci_dev *dev, struct msix_entry *entries,
-			  int *options, int noptions)
-{
-	int i;
-	for (i = 0; i < noptions; ++i)
-		if (!pci_enable_msix(dev, entries, options[i]))
-			return options[i];
-	return -EBUSY;
+	vp_dev->msix_used_vectors = 0;
+	kfree(vp_dev->msix_names);
+	vp_dev->msix_names = NULL;
+	kfree(vp_dev->msix_entries);
+	vp_dev->msix_entries = NULL;
 }
 
-static int vp_request_vectors(struct virtio_device *vdev, unsigned max_vqs)
+static int vp_request_vectors(struct virtio_device *vdev, int nvectors,
+			      bool per_vq_vectors)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
 	const char *name = dev_name(&vp_dev->vdev.dev);
 	unsigned i, v;
 	int err = -ENOMEM;
-	/* We want at most one vector per queue and one for config changes.
-	 * Fallback to separate vectors for config and a shared for queues.
-	 * Finally fall back to regular interrupts. */
-	int options[] = { max_vqs + 1, 2 };
-	int nvectors = max(options[0], options[1]);
+
+	if (!nvectors) {
+		/* Can't allocate MSI-X vectors, use regular interrupt */
+		vp_dev->msix_vectors = 0;
+		err = request_irq(vp_dev->pci_dev->irq, vp_interrupt,
+				  IRQF_SHARED, name, vp_dev);
+		if (err)
+			return err;
+		vp_dev->intx_enabled = 1;
+		return 0;
+	}
 
 	vp_dev->msix_entries = kmalloc(nvectors * sizeof *vp_dev->msix_entries,
 				       GFP_KERNEL);
 	if (!vp_dev->msix_entries)
-		goto error_entries;
+		goto error;
 	vp_dev->msix_names = kmalloc(nvectors * sizeof *vp_dev->msix_names,
 				     GFP_KERNEL);
 	if (!vp_dev->msix_names)
-		goto error_names;
+		goto error;
 
 	for (i = 0; i < nvectors; ++i)
 		vp_dev->msix_entries[i].entry = i;
 
-	err = vp_enable_msix(vp_dev->pci_dev, vp_dev->msix_entries,
-			     options, ARRAY_SIZE(options));
-	if (err < 0) {
-		/* Can't allocate enough MSI-X vectors, use regular interrupt */
-		vp_dev->msix_vectors = 0;
-		err = request_irq(vp_dev->pci_dev->irq, vp_interrupt,
-				  IRQF_SHARED, name, vp_dev);
-		if (err)
-			goto error_irq;
-		vp_dev->intx_enabled = 1;
-	} else {
-		vp_dev->msix_vectors = err;
-		vp_dev->msix_enabled = 1;
-
-		/* Set the vector used for configuration */
-		v = vp_dev->msix_used_vectors;
-		snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
-			 "%s-config", name);
-		err = request_irq(vp_dev->msix_entries[v].vector,
-				  vp_config_changed, 0, vp_dev->msix_names[v],
-				  vp_dev);
-		if (err)
-			goto error_irq;
-		++vp_dev->msix_used_vectors;
-
-		iowrite16(v, vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
-		/* Verify we had enough resources to assign the vector */
-		v = ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
-		if (v == VIRTIO_MSI_NO_VECTOR) {
-			err = -EBUSY;
-			goto error_irq;
-		}
+	err = pci_enable_msix(vp_dev->pci_dev, vp_dev->msix_entries, nvectors);
+	if (err > 0)
+		err = -ENOSPC;
+	if (err)
+		goto error;
+	vp_dev->msix_vectors = nvectors;
+	vp_dev->msix_enabled = 1;
+
+	/* Set the vector used for configuration */
+	v = vp_dev->msix_used_vectors;
+	snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
+		 "%s-config", name);
+	err = request_irq(vp_dev->msix_entries[v].vector,
+			  vp_config_changed, 0, vp_dev->msix_names[v],
+			  vp_dev);
+	if (err)
+		goto error;
+	++vp_dev->msix_used_vectors;
+
+	iowrite16(v, vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+	/* Verify we had enough resources to assign the vector */
+	v = ioread16(vp_dev->ioaddr + VIRTIO_MSI_CONFIG_VECTOR);
+	if (v == VIRTIO_MSI_NO_VECTOR) {
+		err = -EBUSY;
+		goto error;
 	}
 
-	if (vp_dev->msix_vectors && vp_dev->msix_vectors != max_vqs + 1) {
+	if (!per_vq_vectors) {
 		/* Shared vector for all VQs */
 		v = vp_dev->msix_used_vectors;
 		snprintf(vp_dev->msix_names[v], sizeof *vp_dev->msix_names,
@@ -349,28 +347,25 @@ static int vp_request_vectors(struct virtio_device *vdev, unsigned max_vqs)
 				  vp_vring_interrupt, 0, vp_dev->msix_names[v],
 				  vp_dev);
 		if (err)
-			goto error_irq;
+			goto error;
 		++vp_dev->msix_used_vectors;
 	}
 	return 0;
-error_irq:
+error:
 	vp_free_vectors(vdev);
-	kfree(vp_dev->msix_names);
-error_names:
-	kfree(vp_dev->msix_entries);
-error_entries:
 	return err;
 }
 
 static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
 				    void (*callback)(struct virtqueue *vq),
-				    const char *name)
+				    const char *name,
+				    u16 vector)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
 	struct virtio_pci_vq_info *info;
 	struct virtqueue *vq;
 	unsigned long flags, size;
-	u16 num, vector;
+	u16 num;
 	int err;
 
 	/* Select the queue we're interested in */
@@ -389,7 +384,7 @@ static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
 
 	info->queue_index = index;
 	info->num = num;
-	info->vector = VIRTIO_MSI_NO_VECTOR;
+	info->vector = vector;
 
 	size = PAGE_ALIGN(vring_size(num, VIRTIO_PCI_VRING_ALIGN));
 	info->queue = alloc_pages_exact(size, GFP_KERNEL|__GFP_ZERO);
@@ -413,22 +408,7 @@ static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
 	vq->priv = info;
 	info->vq = vq;
 
-	/* allocate per-vq vector if available and necessary */
-	if (callback && vp_dev->msix_used_vectors < vp_dev->msix_vectors) {
-		vector = vp_dev->msix_used_vectors;
-		snprintf(vp_dev->msix_names[vector], sizeof *vp_dev->msix_names,
-			 "%s-%s", dev_name(&vp_dev->vdev.dev), name);
-		err = request_irq(vp_dev->msix_entries[vector].vector,
-				  vring_interrupt, 0,
-				  vp_dev->msix_names[vector], vq);
-		if (err)
-			goto out_request_irq;
-		info->vector = vector;
-		++vp_dev->msix_used_vectors;
-	} else
-		vector = VP_MSIX_VQ_VECTOR;
-
-	 if (callback && vp_dev->msix_enabled) {
+	 if (vector != VIRTIO_MSI_NO_VECTOR) {
 		iowrite16(vector, vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
 		vector = ioread16(vp_dev->ioaddr + VIRTIO_MSI_QUEUE_VECTOR);
 		if (vector == VIRTIO_MSI_NO_VECTOR) {
@@ -444,11 +424,6 @@ static struct virtqueue *vp_find_vq(struct virtio_device *vdev, unsigned index,
 	return vq;
 
 out_assign:
-	if (info->vector != VIRTIO_MSI_NO_VECTOR) {
-		free_irq(vp_dev->msix_entries[info->vector].vector, vq);
-		--vp_dev->msix_used_vectors;
-	}
-out_request_irq:
 	vring_del_virtqueue(vq);
 out_activate_queue:
 	iowrite32(0, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN);
@@ -462,12 +437,13 @@ static void vp_del_vq(struct virtqueue *vq)
 {
 	struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev);
 	struct virtio_pci_vq_info *info = vq->priv;
-	unsigned long size;
+	unsigned long flags, size;
 
-	iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);
+	spin_lock_irqsave(&vp_dev->lock, flags);
+	list_del(&info->node);
+	spin_unlock_irqrestore(&vp_dev->lock, flags);
 
-	if (info->vector != VIRTIO_MSI_NO_VECTOR)
-		free_irq(vp_dev->msix_entries[info->vector].vector, vq);
+	iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL);
 
 	if (vp_dev->msix_enabled) {
 		iowrite16(VIRTIO_MSI_NO_VECTOR,
@@ -489,36 +465,62 @@ static void vp_del_vq(struct virtqueue *vq)
 /* the config->del_vqs() implementation */
 static void vp_del_vqs(struct virtio_device *vdev)
 {
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
 	struct virtqueue *vq, *n;
+	struct virtio_pci_vq_info *info;
 
-	list_for_each_entry_safe(vq, n, &vdev->vqs, list)
+	list_for_each_entry_safe(vq, n, &vdev->vqs, list) {
+		info = vq->priv;
+		if (vp_dev->per_vq_vectors)
+			free_irq(vp_dev->msix_entries[info->vector].vector, vq);
 		vp_del_vq(vq);
+	}
+	vp_dev->per_vq_vectors = false;
 
 	vp_free_vectors(vdev);
 }
 
-/* the config->find_vqs() implementation */
-static int vp_find_vqs(struct virtio_device *vdev, unsigned nvqs,
-		       struct virtqueue *vqs[],
-		       vq_callback_t *callbacks[],
-		       const char *names[])
+static int vp_try_to_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+			      struct virtqueue *vqs[],
+			      vq_callback_t *callbacks[],
+			      const char *names[],
+			      int nvectors,
+			      bool per_vq_vectors)
 {
-	int vectors = 0;
-	int i, err;
-
-	/* How many vectors would we like? */
-	for (i = 0; i < nvqs; ++i)
-		if (callbacks[i])
-			++vectors;
+	struct virtio_pci_device *vp_dev = to_vp_device(vdev);
+	u16 vector;
+	int i, err, allocated_vectors;
 
-	err = vp_request_vectors(vdev, vectors);
+	err = vp_request_vectors(vdev, nvectors, per_vq_vectors);
 	if (err)
 		goto error_request;
 
+	vp_dev->per_vq_vectors = per_vq_vectors;
+	allocated_vectors = vp_dev->msix_used_vectors;
 	for (i = 0; i < nvqs; ++i) {
-		vqs[i] = vp_find_vq(vdev, i, callbacks[i], names[i]);
-		if (IS_ERR(vqs[i]))
+		if (!callbacks[i] || !vp_dev->msix_enabled)
+			vector = VIRTIO_MSI_NO_VECTOR;
+		else if (vp_dev->per_vq_vectors)
+			vector = allocated_vectors++;
+		else
+			vector = VP_MSIX_VQ_VECTOR;
+		vqs[i] = vp_find_vq(vdev, i, callbacks[i], names[i], vector);
+		if (IS_ERR(vqs[i])) {
+			err = PTR_ERR(vqs[i]);
 			goto error_find;
+		}
+		/* allocate per-vq irq if available and necessary */
+		if (vp_dev->per_vq_vectors && vector != VIRTIO_MSI_NO_VECTOR) {
+			snprintf(vp_dev->msix_names[vector], sizeof *vp_dev->msix_names,
+				 "%s-%s", dev_name(&vp_dev->vdev.dev), names[i]);
+			err = request_irq(vp_dev->msix_entries[vector].vector,
+					  vring_interrupt, 0,
+					  vp_dev->msix_names[vector], vqs[i]);
+			if (err) {
+				vp_del_vq(vqs[i]);
+				goto error_find;
+			}
+		}
 	}
 	return 0;
 
@@ -526,7 +528,37 @@ error_find:
 	vp_del_vqs(vdev);
 
 error_request:
-	return PTR_ERR(vqs[i]);
+	return err;
+}
+
+/* the config->find_vqs() implementation */
+static int vp_find_vqs(struct virtio_device *vdev, unsigned nvqs,
+		       struct virtqueue *vqs[],
+		       vq_callback_t *callbacks[],
+		       const char *names[])
+{
+	int vectors = 0;
+	int i, uninitialized_var(err);
+
+	/* How many vectors would we like? */
+	for (i = 0; i < nvqs; ++i)
+		if (callbacks[i])
+			++vectors;
+
+	/* We want at most one vector per queue and one for config changes. */
+	err = vp_try_to_find_vqs(vdev, nvqs, vqs, callbacks, names,
+				 vectors + 1, true);
+	if (!err)
+		return 0;
+	/* Fallback to separate vectors for config and a shared for queues. */
+	err = vp_try_to_find_vqs(vdev, nvqs, vqs, callbacks, names,
+				 2, false);
+	if (!err)
+		return 0;
+	/* Finally fall back to regular interrupts. */
+	err = vp_try_to_find_vqs(vdev, nvqs, vqs, callbacks, names,
+				 0, false);
+	return err;
 }
 
 static struct virtio_config_ops virtio_pci_config_ops = {
diff --git a/fs/block_dev.c b/fs/block_dev.c
index 3a6d4fb..94dfda2 100644
--- a/fs/block_dev.c
+++ b/fs/block_dev.c
@@ -564,6 +564,16 @@ struct block_device *bdget(dev_t dev)
 
 EXPORT_SYMBOL(bdget);
 
+/**
+ * bdgrab -- Grab a reference to an already referenced block device
+ * @bdev:	Block device to grab a reference to.
+ */
+struct block_device *bdgrab(struct block_device *bdev)
+{
+	atomic_inc(&bdev->bd_inode->i_count);
+	return bdev;
+}
+
 long nr_blockdev_pages(void)
 {
 	struct block_device *bdev;
diff --git a/fs/btrfs/async-thread.c b/fs/btrfs/async-thread.c
index 6e4f6c5..019e8af 100644
--- a/fs/btrfs/async-thread.c
+++ b/fs/btrfs/async-thread.c
@@ -424,11 +424,11 @@ int btrfs_requeue_work(struct btrfs_work *work)
 	 * list
 	 */
 	if (worker->idle) {
-		spin_lock_irqsave(&worker->workers->lock, flags);
+		spin_lock(&worker->workers->lock);
 		worker->idle = 0;
 		list_move_tail(&worker->worker_list,
 			       &worker->workers->worker_list);
-		spin_unlock_irqrestore(&worker->workers->lock, flags);
+		spin_unlock(&worker->workers->lock);
 	}
 	if (!worker->working) {
 		wake = 1;
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index 60a45f3..3fdcc05 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -557,19 +557,7 @@ static int comp_keys(struct btrfs_disk_key *disk, struct btrfs_key *k2)
 
 	btrfs_disk_key_to_cpu(&k1, disk);
 
-	if (k1.objectid > k2->objectid)
-		return 1;
-	if (k1.objectid < k2->objectid)
-		return -1;
-	if (k1.type > k2->type)
-		return 1;
-	if (k1.type < k2->type)
-		return -1;
-	if (k1.offset > k2->offset)
-		return 1;
-	if (k1.offset < k2->offset)
-		return -1;
-	return 0;
+	return btrfs_comp_cpu_keys(&k1, k2);
 }
 
 /*
@@ -1052,9 +1040,6 @@ static noinline int balance_level(struct btrfs_trans_handle *trans,
 	    BTRFS_NODEPTRS_PER_BLOCK(root) / 4)
 		return 0;
 
-	if (btrfs_header_nritems(mid) > 2)
-		return 0;
-
 	if (btrfs_header_nritems(mid) < 2)
 		err_on_enospc = 1;
 
@@ -1701,6 +1686,7 @@ int btrfs_search_slot(struct btrfs_trans_handle *trans, struct btrfs_root
 	struct extent_buffer *b;
 	int slot;
 	int ret;
+	int err;
 	int level;
 	int lowest_unlock = 1;
 	u8 lowest_level = 0;
@@ -1737,8 +1723,6 @@ again:
 			p->locks[level] = 1;
 
 		if (cow) {
-			int wret;
-
 			/*
 			 * if we don't really need to cow this block
 			 * then we don't want to set the path blocking,
@@ -1749,12 +1733,12 @@ again:
 
 			btrfs_set_path_blocking(p);
 
-			wret = btrfs_cow_block(trans, root, b,
-					       p->nodes[level + 1],
-					       p->slots[level + 1], &b);
-			if (wret) {
+			err = btrfs_cow_block(trans, root, b,
+					      p->nodes[level + 1],
+					      p->slots[level + 1], &b);
+			if (err) {
 				free_extent_buffer(b);
-				ret = wret;
+				ret = err;
 				goto done;
 			}
 		}
@@ -1793,41 +1777,45 @@ cow_done:
 		ret = bin_search(b, key, level, &slot);
 
 		if (level != 0) {
-			if (ret && slot > 0)
+			int dec = 0;
+			if (ret && slot > 0) {
+				dec = 1;
 				slot -= 1;
+			}
 			p->slots[level] = slot;
-			ret = setup_nodes_for_search(trans, root, p, b, level,
+			err = setup_nodes_for_search(trans, root, p, b, level,
 						     ins_len);
-			if (ret == -EAGAIN)
+			if (err == -EAGAIN)
 				goto again;
-			else if (ret)
+			if (err) {
+				ret = err;
 				goto done;
+			}
 			b = p->nodes[level];
 			slot = p->slots[level];
 
 			unlock_up(p, level, lowest_unlock);
 
-			/* this is only true while dropping a snapshot */
 			if (level == lowest_level) {
-				ret = 0;
+				if (dec)
+					p->slots[level]++;
 				goto done;
 			}
 
-			ret = read_block_for_search(trans, root, p,
+			err = read_block_for_search(trans, root, p,
 						    &b, level, slot, key);
-			if (ret == -EAGAIN)
+			if (err == -EAGAIN)
 				goto again;
-
-			if (ret == -EIO)
+			if (err) {
+				ret = err;
 				goto done;
+			}
 
 			if (!p->skip_locking) {
-				int lret;
-
 				btrfs_clear_path_blocking(p, NULL);
-				lret = btrfs_try_spin_lock(b);
+				err = btrfs_try_spin_lock(b);
 
-				if (!lret) {
+				if (!err) {
 					btrfs_set_path_blocking(p);
 					btrfs_tree_lock(b);
 					btrfs_clear_path_blocking(p, b);
@@ -1837,16 +1825,14 @@ cow_done:
 			p->slots[level] = slot;
 			if (ins_len > 0 &&
 			    btrfs_leaf_free_space(root, b) < ins_len) {
-				int sret;
-
 				btrfs_set_path_blocking(p);
-				sret = split_leaf(trans, root, key,
-						      p, ins_len, ret == 0);
+				err = split_leaf(trans, root, key,
+						 p, ins_len, ret == 0);
 				btrfs_clear_path_blocking(p, NULL);
 
-				BUG_ON(sret > 0);
-				if (sret) {
-					ret = sret;
+				BUG_ON(err > 0);
+				if (err) {
+					ret = err;
 					goto done;
 				}
 			}
@@ -3807,7 +3793,7 @@ int btrfs_del_items(struct btrfs_trans_handle *trans, struct btrfs_root *root,
 		}
 
 		/* delete the leaf if it is mostly empty */
-		if (used < BTRFS_LEAF_DATA_SIZE(root) / 2) {
+		if (used < BTRFS_LEAF_DATA_SIZE(root) / 3) {
 			/* push_leaf_left fixes the path.
 			 * make sure the path still points to our leaf
 			 * for possible call to del_ptr below
@@ -4042,10 +4028,9 @@ out:
  * calling this function.
  */
 int btrfs_find_next_key(struct btrfs_root *root, struct btrfs_path *path,
-			struct btrfs_key *key, int lowest_level,
+			struct btrfs_key *key, int level,
 			int cache_only, u64 min_trans)
 {
-	int level = lowest_level;
 	int slot;
 	struct extent_buffer *c;
 
@@ -4058,11 +4043,40 @@ int btrfs_find_next_key(struct btrfs_root *root, struct btrfs_path *path,
 		c = path->nodes[level];
 next:
 		if (slot >= btrfs_header_nritems(c)) {
-			level++;
-			if (level == BTRFS_MAX_LEVEL)
+			int ret;
+			int orig_lowest;
+			struct btrfs_key cur_key;
+			if (level + 1 >= BTRFS_MAX_LEVEL ||
+			    !path->nodes[level + 1])
 				return 1;
-			continue;
+
+			if (path->locks[level + 1]) {
+				level++;
+				continue;
+			}
+
+			slot = btrfs_header_nritems(c) - 1;
+			if (level == 0)
+				btrfs_item_key_to_cpu(c, &cur_key, slot);
+			else
+				btrfs_node_key_to_cpu(c, &cur_key, slot);
+
+			orig_lowest = path->lowest_level;
+			btrfs_release_path(root, path);
+			path->lowest_level = level;
+			ret = btrfs_search_slot(NULL, root, &cur_key, path,
+						0, 0);
+			path->lowest_level = orig_lowest;
+			if (ret < 0)
+				return ret;
+
+			c = path->nodes[level];
+			slot = path->slots[level];
+			if (ret == 0)
+				slot++;
+			goto next;
 		}
+
 		if (level == 0)
 			btrfs_item_key_to_cpu(c, key, slot);
 		else {
@@ -4146,7 +4160,8 @@ again:
 	 * advance the path if there are now more items available.
 	 */
 	if (nritems > 0 && path->slots[0] < nritems - 1) {
-		path->slots[0]++;
+		if (ret == 0)
+			path->slots[0]++;
 		ret = 0;
 		goto done;
 	}
@@ -4278,10 +4293,10 @@ int btrfs_previous_item(struct btrfs_root *root,
 			path->slots[0]--;
 
 		btrfs_item_key_to_cpu(leaf, &found_key, path->slots[0]);
-		if (found_key.type == type)
-			return 0;
 		if (found_key.objectid < min_objectid)
 			break;
+		if (found_key.type == type)
+			return 0;
 		if (found_key.objectid == min_objectid &&
 		    found_key.type < type)
 			break;
diff --git a/fs/btrfs/ctree.h b/fs/btrfs/ctree.h
index 98a8738..837435c 100644
--- a/fs/btrfs/ctree.h
+++ b/fs/btrfs/ctree.h
@@ -481,7 +481,7 @@ struct btrfs_shared_data_ref {
 
 struct btrfs_extent_inline_ref {
 	u8 type;
-	u64 offset;
+	__le64 offset;
 } __attribute__ ((__packed__));
 
 /* old style backrefs item */
@@ -689,6 +689,7 @@ struct btrfs_space_info {
 	struct list_head block_groups;
 	spinlock_t lock;
 	struct rw_semaphore groups_sem;
+	atomic_t caching_threads;
 };
 
 /*
@@ -707,6 +708,9 @@ struct btrfs_free_cluster {
 	/* first extent starting offset */
 	u64 window_start;
 
+	/* if this cluster simply points at a bitmap in the block group */
+	bool points_to_bitmap;
+
 	struct btrfs_block_group_cache *block_group;
 	/*
 	 * when a cluster is allocated from a block group, we put the
@@ -716,24 +720,37 @@ struct btrfs_free_cluster {
 	struct list_head block_group_list;
 };
 
+enum btrfs_caching_type {
+	BTRFS_CACHE_NO		= 0,
+	BTRFS_CACHE_STARTED	= 1,
+	BTRFS_CACHE_FINISHED	= 2,
+};
+
 struct btrfs_block_group_cache {
 	struct btrfs_key key;
 	struct btrfs_block_group_item item;
+	struct btrfs_fs_info *fs_info;
 	spinlock_t lock;
-	struct mutex cache_mutex;
 	u64 pinned;
 	u64 reserved;
 	u64 flags;
-	int cached;
+	u64 sectorsize;
+	int extents_thresh;
+	int free_extents;
+	int total_bitmaps;
 	int ro;
 	int dirty;
 
+	/* cache tracking stuff */
+	wait_queue_head_t caching_q;
+	int cached;
+
 	struct btrfs_space_info *space_info;
 
 	/* free space cache stuff */
 	spinlock_t tree_lock;
-	struct rb_root free_space_bytes;
 	struct rb_root free_space_offset;
+	u64 free_space;
 
 	/* block group cache stuff */
 	struct rb_node cache_node;
@@ -808,6 +825,7 @@ struct btrfs_fs_info {
 	struct mutex drop_mutex;
 	struct mutex volume_mutex;
 	struct mutex tree_reloc_mutex;
+	struct rw_semaphore extent_commit_sem;
 
 	/*
 	 * this protects the ordered operations list only while we are
@@ -1988,6 +2006,7 @@ void btrfs_delalloc_reserve_space(struct btrfs_root *root, struct inode *inode,
 				 u64 bytes);
 void btrfs_delalloc_free_space(struct btrfs_root *root, struct inode *inode,
 			      u64 bytes);
+void btrfs_free_pinned_extents(struct btrfs_fs_info *info);
 /* ctree.c */
 int btrfs_bin_search(struct extent_buffer *eb, struct btrfs_key *key,
 		     int level, int *slot);
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index d28d29c..e83be2e 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -1639,6 +1639,7 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 	mutex_init(&fs_info->cleaner_mutex);
 	mutex_init(&fs_info->volume_mutex);
 	mutex_init(&fs_info->tree_reloc_mutex);
+	init_rwsem(&fs_info->extent_commit_sem);
 
 	btrfs_init_free_cluster(&fs_info->meta_alloc_cluster);
 	btrfs_init_free_cluster(&fs_info->data_alloc_cluster);
@@ -1799,6 +1800,11 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 					   btrfs_super_chunk_root(disk_super),
 					   blocksize, generation);
 	BUG_ON(!chunk_root->node);
+	if (!test_bit(EXTENT_BUFFER_UPTODATE, &chunk_root->node->bflags)) {
+		printk(KERN_WARNING "btrfs: failed to read chunk root on %s\n",
+		       sb->s_id);
+		goto fail_chunk_root;
+	}
 	btrfs_set_root_node(&chunk_root->root_item, chunk_root->node);
 	chunk_root->commit_root = btrfs_root_node(chunk_root);
 
@@ -1826,6 +1832,11 @@ struct btrfs_root *open_ctree(struct super_block *sb,
 					  blocksize, generation);
 	if (!tree_root->node)
 		goto fail_chunk_root;
+	if (!test_bit(EXTENT_BUFFER_UPTODATE, &tree_root->node->bflags)) {
+		printk(KERN_WARNING "btrfs: failed to read tree root on %s\n",
+		       sb->s_id);
+		goto fail_tree_root;
+	}
 	btrfs_set_root_node(&tree_root->root_item, tree_root->node);
 	tree_root->commit_root = btrfs_root_node(tree_root);
 
@@ -2322,6 +2333,9 @@ int close_ctree(struct btrfs_root *root)
 			printk(KERN_ERR "btrfs: commit super ret %d\n", ret);
 	}
 
+	fs_info->closing = 2;
+	smp_mb();
+
 	if (fs_info->delalloc_bytes) {
 		printk(KERN_INFO "btrfs: at unmount delalloc count %llu\n",
 		       (unsigned long long)fs_info->delalloc_bytes);
@@ -2343,6 +2357,7 @@ int close_ctree(struct btrfs_root *root)
 	free_extent_buffer(root->fs_info->csum_root->commit_root);
 
 	btrfs_free_block_groups(root->fs_info);
+	btrfs_free_pinned_extents(root->fs_info);
 
 	del_fs_roots(fs_info);
 
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index a5aca39..dc84dae 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -21,6 +21,7 @@
 #include <linux/blkdev.h>
 #include <linux/sort.h>
 #include <linux/rcupdate.h>
+#include <linux/kthread.h>
 #include "compat.h"
 #include "hash.h"
 #include "ctree.h"
@@ -61,6 +62,13 @@ static int do_chunk_alloc(struct btrfs_trans_handle *trans,
 			  struct btrfs_root *extent_root, u64 alloc_bytes,
 			  u64 flags, int force);
 
+static noinline int
+block_group_cache_done(struct btrfs_block_group_cache *cache)
+{
+	smp_mb();
+	return cache->cached == BTRFS_CACHE_FINISHED;
+}
+
 static int block_group_bits(struct btrfs_block_group_cache *cache, u64 bits)
 {
 	return (cache->flags & bits) == bits;
@@ -146,20 +154,70 @@ block_group_cache_tree_search(struct btrfs_fs_info *info, u64 bytenr,
 }
 
 /*
+ * We always set EXTENT_LOCKED for the super mirror extents so we don't
+ * overwrite them, so those bits need to be unset.  Also, if we are unmounting
+ * with pinned extents still sitting there because we had a block group caching,
+ * we need to clear those now, since we are done.
+ */
+void btrfs_free_pinned_extents(struct btrfs_fs_info *info)
+{
+	u64 start, end, last = 0;
+	int ret;
+
+	while (1) {
+		ret = find_first_extent_bit(&info->pinned_extents, last,
+					    &start, &end,
+					    EXTENT_LOCKED|EXTENT_DIRTY);
+		if (ret)
+			break;
+
+		clear_extent_bits(&info->pinned_extents, start, end,
+				  EXTENT_LOCKED|EXTENT_DIRTY, GFP_NOFS);
+		last = end+1;
+	}
+}
+
+static int remove_sb_from_cache(struct btrfs_root *root,
+				struct btrfs_block_group_cache *cache)
+{
+	struct btrfs_fs_info *fs_info = root->fs_info;
+	u64 bytenr;
+	u64 *logical;
+	int stripe_len;
+	int i, nr, ret;
+
+	for (i = 0; i < BTRFS_SUPER_MIRROR_MAX; i++) {
+		bytenr = btrfs_sb_offset(i);
+		ret = btrfs_rmap_block(&root->fs_info->mapping_tree,
+				       cache->key.objectid, bytenr,
+				       0, &logical, &nr, &stripe_len);
+		BUG_ON(ret);
+		while (nr--) {
+			try_lock_extent(&fs_info->pinned_extents,
+					logical[nr],
+					logical[nr] + stripe_len - 1, GFP_NOFS);
+		}
+		kfree(logical);
+	}
+
+	return 0;
+}
+
+/*
  * this is only called by cache_block_group, since we could have freed extents
  * we need to check the pinned_extents for any extents that can't be used yet
  * since their free space will be released as soon as the transaction commits.
  */
-static int add_new_free_space(struct btrfs_block_group_cache *block_group,
+static u64 add_new_free_space(struct btrfs_block_group_cache *block_group,
 			      struct btrfs_fs_info *info, u64 start, u64 end)
 {
-	u64 extent_start, extent_end, size;
+	u64 extent_start, extent_end, size, total_added = 0;
 	int ret;
 
 	while (start < end) {
 		ret = find_first_extent_bit(&info->pinned_extents, start,
 					    &extent_start, &extent_end,
-					    EXTENT_DIRTY);
+					    EXTENT_DIRTY|EXTENT_LOCKED);
 		if (ret)
 			break;
 
@@ -167,6 +225,7 @@ static int add_new_free_space(struct btrfs_block_group_cache *block_group,
 			start = extent_end + 1;
 		} else if (extent_start > start && extent_start < end) {
 			size = extent_start - start;
+			total_added += size;
 			ret = btrfs_add_free_space(block_group, start,
 						   size);
 			BUG_ON(ret);
@@ -178,84 +237,80 @@ static int add_new_free_space(struct btrfs_block_group_cache *block_group,
 
 	if (start < end) {
 		size = end - start;
+		total_added += size;
 		ret = btrfs_add_free_space(block_group, start, size);
 		BUG_ON(ret);
 	}
 
-	return 0;
+	return total_added;
 }
 
-static int remove_sb_from_cache(struct btrfs_root *root,
-				struct btrfs_block_group_cache *cache)
-{
-	u64 bytenr;
-	u64 *logical;
-	int stripe_len;
-	int i, nr, ret;
-
-	for (i = 0; i < BTRFS_SUPER_MIRROR_MAX; i++) {
-		bytenr = btrfs_sb_offset(i);
-		ret = btrfs_rmap_block(&root->fs_info->mapping_tree,
-				       cache->key.objectid, bytenr, 0,
-				       &logical, &nr, &stripe_len);
-		BUG_ON(ret);
-		while (nr--) {
-			btrfs_remove_free_space(cache, logical[nr],
-						stripe_len);
-		}
-		kfree(logical);
-	}
-	return 0;
-}
-
-static int cache_block_group(struct btrfs_root *root,
-			     struct btrfs_block_group_cache *block_group)
+static int caching_kthread(void *data)
 {
+	struct btrfs_block_group_cache *block_group = data;
+	struct btrfs_fs_info *fs_info = block_group->fs_info;
+	u64 last = 0;
 	struct btrfs_path *path;
 	int ret = 0;
 	struct btrfs_key key;
 	struct extent_buffer *leaf;
 	int slot;
-	u64 last;
-
-	if (!block_group)
-		return 0;
+	u64 total_found = 0;
 
-	root = root->fs_info->extent_root;
-
-	if (block_group->cached)
-		return 0;
+	BUG_ON(!fs_info);
 
 	path = btrfs_alloc_path();
 	if (!path)
 		return -ENOMEM;
 
-	path->reada = 2;
+	atomic_inc(&block_group->space_info->caching_threads);
+	last = max_t(u64, block_group->key.objectid, BTRFS_SUPER_INFO_OFFSET);
+again:
+	/* need to make sure the commit_root doesn't disappear */
+	down_read(&fs_info->extent_commit_sem);
+
 	/*
-	 * we get into deadlocks with paths held by callers of this function.
-	 * since the alloc_mutex is protecting things right now, just
-	 * skip the locking here
+	 * We don't want to deadlock with somebody trying to allocate a new
+	 * extent for the extent root while also trying to search the extent
+	 * root to add free space.  So we skip locking and search the commit
+	 * root, since its read-only
 	 */
 	path->skip_locking = 1;
-	last = max_t(u64, block_group->key.objectid, BTRFS_SUPER_INFO_OFFSET);
+	path->search_commit_root = 1;
+	path->reada = 2;
+
 	key.objectid = last;
 	key.offset = 0;
 	btrfs_set_key_type(&key, BTRFS_EXTENT_ITEM_KEY);
-	ret = btrfs_search_slot(NULL, root, &key, path, 0, 0);
+	ret = btrfs_search_slot(NULL, fs_info->extent_root, &key, path, 0, 0);
 	if (ret < 0)
 		goto err;
 
 	while (1) {
+		smp_mb();
+		if (block_group->fs_info->closing > 1) {
+			last = (u64)-1;
+			break;
+		}
+
 		leaf = path->nodes[0];
 		slot = path->slots[0];
 		if (slot >= btrfs_header_nritems(leaf)) {
-			ret = btrfs_next_leaf(root, path);
+			ret = btrfs_next_leaf(fs_info->extent_root, path);
 			if (ret < 0)
 				goto err;
-			if (ret == 0)
-				continue;
-			else
+			else if (ret)
 				break;
+
+			if (need_resched() ||
+			    btrfs_transaction_in_commit(fs_info)) {
+				btrfs_release_path(fs_info->extent_root, path);
+				up_read(&fs_info->extent_commit_sem);
+				schedule_timeout(1);
+				goto again;
+			}
+
+			continue;
 		}
 		btrfs_item_key_to_cpu(leaf, &key, slot);
 		if (key.objectid < block_group->key.objectid)
@@ -266,24 +321,59 @@ static int cache_block_group(struct btrfs_root *root,
 			break;
 
 		if (btrfs_key_type(&key) == BTRFS_EXTENT_ITEM_KEY) {
-			add_new_free_space(block_group, root->fs_info, last,
-					   key.objectid);
-
+			total_found += add_new_free_space(block_group,
+							  fs_info, last,
+							  key.objectid);
 			last = key.objectid + key.offset;
 		}
+
+		if (total_found > (1024 * 1024 * 2)) {
+			total_found = 0;
+			wake_up(&block_group->caching_q);
+		}
 next:
 		path->slots[0]++;
 	}
+	ret = 0;
 
-	add_new_free_space(block_group, root->fs_info, last,
-			   block_group->key.objectid +
-			   block_group->key.offset);
+	total_found += add_new_free_space(block_group, fs_info, last,
+					  block_group->key.objectid +
+					  block_group->key.offset);
+
+	spin_lock(&block_group->lock);
+	block_group->cached = BTRFS_CACHE_FINISHED;
+	spin_unlock(&block_group->lock);
 
-	block_group->cached = 1;
-	remove_sb_from_cache(root, block_group);
-	ret = 0;
 err:
 	btrfs_free_path(path);
+	up_read(&fs_info->extent_commit_sem);
+	atomic_dec(&block_group->space_info->caching_threads);
+	wake_up(&block_group->caching_q);
+
+	return 0;
+}
+
+static int cache_block_group(struct btrfs_block_group_cache *cache)
+{
+	struct task_struct *tsk;
+	int ret = 0;
+
+	spin_lock(&cache->lock);
+	if (cache->cached != BTRFS_CACHE_NO) {
+		spin_unlock(&cache->lock);
+		return ret;
+	}
+	cache->cached = BTRFS_CACHE_STARTED;
+	spin_unlock(&cache->lock);
+
+	tsk = kthread_run(caching_kthread, cache, "btrfs-cache-%llu\n",
+			  cache->key.objectid);
+	if (IS_ERR(tsk)) {
+		ret = PTR_ERR(tsk);
+		printk(KERN_ERR "error running thread %d\n", ret);
+		BUG();
+	}
+
 	return ret;
 }
 
@@ -2387,13 +2477,29 @@ fail:
 
 }
 
+static struct btrfs_block_group_cache *
+next_block_group(struct btrfs_root *root,
+		 struct btrfs_block_group_cache *cache)
+{
+	struct rb_node *node;
+	spin_lock(&root->fs_info->block_group_cache_lock);
+	node = rb_next(&cache->cache_node);
+	btrfs_put_block_group(cache);
+	if (node) {
+		cache = rb_entry(node, struct btrfs_block_group_cache,
+				 cache_node);
+		atomic_inc(&cache->count);
+	} else
+		cache = NULL;
+	spin_unlock(&root->fs_info->block_group_cache_lock);
+	return cache;
+}
+
 int btrfs_write_dirty_block_groups(struct btrfs_trans_handle *trans,
 				   struct btrfs_root *root)
 {
-	struct btrfs_block_group_cache *cache, *entry;
-	struct rb_node *n;
+	struct btrfs_block_group_cache *cache;
 	int err = 0;
-	int werr = 0;
 	struct btrfs_path *path;
 	u64 last = 0;
 
@@ -2402,39 +2508,35 @@ int btrfs_write_dirty_block_groups(struct btrfs_trans_handle *trans,
 		return -ENOMEM;
 
 	while (1) {
-		cache = NULL;
-		spin_lock(&root->fs_info->block_group_cache_lock);
-		for (n = rb_first(&root->fs_info->block_group_cache_tree);
-		     n; n = rb_next(n)) {
-			entry = rb_entry(n, struct btrfs_block_group_cache,
-					 cache_node);
-			if (entry->dirty) {
-				cache = entry;
-				break;
-			}
+		if (last == 0) {
+			err = btrfs_run_delayed_refs(trans, root,
+						     (unsigned long)-1);
+			BUG_ON(err);
 		}
-		spin_unlock(&root->fs_info->block_group_cache_lock);
 
-		if (!cache)
-			break;
+		cache = btrfs_lookup_first_block_group(root->fs_info, last);
+		while (cache) {
+			if (cache->dirty)
+				break;
+			cache = next_block_group(root, cache);
+		}
+		if (!cache) {
+			if (last == 0)
+				break;
+			last = 0;
+			continue;
+		}
 
 		cache->dirty = 0;
-		last += cache->key.offset;
+		last = cache->key.objectid + cache->key.offset;
 
-		err = write_one_cache_group(trans, root,
-					    path, cache);
-		/*
-		 * if we fail to write the cache group, we want
-		 * to keep it marked dirty in hopes that a later
-		 * write will work
-		 */
-		if (err) {
-			werr = err;
-			continue;
-		}
+		err = write_one_cache_group(trans, root, path, cache);
+		BUG_ON(err);
+		btrfs_put_block_group(cache);
 	}
+
 	btrfs_free_path(path);
-	return werr;
+	return 0;
 }
 
 int btrfs_extent_readonly(struct btrfs_root *root, u64 bytenr)
@@ -2484,6 +2586,7 @@ static int update_space_info(struct btrfs_fs_info *info, u64 flags,
 	found->force_alloc = 0;
 	*space_info = found;
 	list_add_rcu(&found->list, &info->space_info);
+	atomic_set(&found->caching_threads, 0);
 	return 0;
 }
 
@@ -2947,13 +3050,9 @@ int btrfs_update_pinned_extents(struct btrfs_root *root,
 	struct btrfs_block_group_cache *cache;
 	struct btrfs_fs_info *fs_info = root->fs_info;
 
-	if (pin) {
+	if (pin)
 		set_extent_dirty(&fs_info->pinned_extents,
 				bytenr, bytenr + num - 1, GFP_NOFS);
-	} else {
-		clear_extent_dirty(&fs_info->pinned_extents,
-				bytenr, bytenr + num - 1, GFP_NOFS);
-	}
 
 	while (num > 0) {
 		cache = btrfs_lookup_block_group(fs_info, bytenr);
@@ -2969,14 +3068,34 @@ int btrfs_update_pinned_extents(struct btrfs_root *root,
 			spin_unlock(&cache->space_info->lock);
 			fs_info->total_pinned += len;
 		} else {
+			int unpin = 0;
+
+			/*
+			 * in order to not race with the block group caching, we
+			 * only want to unpin the extent if we are cached.  If
+			 * we aren't cached, we want to start async caching this
+			 * block group so we can free the extent the next time
+			 * around.
+			 */
 			spin_lock(&cache->space_info->lock);
 			spin_lock(&cache->lock);
-			cache->pinned -= len;
-			cache->space_info->bytes_pinned -= len;
+			unpin = (cache->cached == BTRFS_CACHE_FINISHED);
+			if (likely(unpin)) {
+				cache->pinned -= len;
+				cache->space_info->bytes_pinned -= len;
+				fs_info->total_pinned -= len;
+			}
 			spin_unlock(&cache->lock);
 			spin_unlock(&cache->space_info->lock);
-			fs_info->total_pinned -= len;
-			if (cache->cached)
+
+			if (likely(unpin))
+				clear_extent_dirty(&fs_info->pinned_extents,
+						   bytenr, bytenr + len -1,
+						   GFP_NOFS);
+			else
+				cache_block_group(cache);
+
+			if (unpin)
 				btrfs_add_free_space(cache, bytenr, len);
 		}
 		btrfs_put_block_group(cache);
@@ -3030,6 +3149,7 @@ int btrfs_copy_pinned(struct btrfs_root *root, struct extent_io_tree *copy)
 					    &start, &end, EXTENT_DIRTY);
 		if (ret)
 			break;
+
 		set_extent_dirty(copy, start, end, GFP_NOFS);
 		last = end + 1;
 	}
@@ -3058,6 +3178,7 @@ int btrfs_finish_extent_commit(struct btrfs_trans_handle *trans,
 
 		cond_resched();
 	}
+
 	return ret;
 }
 
@@ -3436,6 +3557,45 @@ static u64 stripe_align(struct btrfs_root *root, u64 val)
 }
 
 /*
+ * when we wait for progress in the block group caching, its because
+ * our allocation attempt failed at least once.  So, we must sleep
+ * and let some progress happen before we try again.
+ *
+ * This function will sleep at least once waiting for new free space to
+ * show up, and then it will check the block group free space numbers
+ * for our min num_bytes.  Another option is to have it go ahead
+ * and look in the rbtree for a free extent of a given size, but this
+ * is a good start.
+ */
+static noinline int
+wait_block_group_cache_progress(struct btrfs_block_group_cache *cache,
+				u64 num_bytes)
+{
+	DEFINE_WAIT(wait);
+
+	prepare_to_wait(&cache->caching_q, &wait, TASK_UNINTERRUPTIBLE);
+
+	if (block_group_cache_done(cache)) {
+		finish_wait(&cache->caching_q, &wait);
+		return 0;
+	}
+	schedule();
+	finish_wait(&cache->caching_q, &wait);
+
+	wait_event(cache->caching_q, block_group_cache_done(cache) ||
+		   (cache->free_space >= num_bytes));
+	return 0;
+}
+
+enum btrfs_loop_type {
+	LOOP_CACHED_ONLY = 0,
+	LOOP_CACHING_NOWAIT = 1,
+	LOOP_CACHING_WAIT = 2,
+	LOOP_ALLOC_CHUNK = 3,
+	LOOP_NO_EMPTY_SIZE = 4,
+};
+
+/*
  * walks the btree of allocated extents and find a hole of a given size.
  * The key ins is changed to record the hole:
  * ins->objectid == block start
@@ -3460,6 +3620,7 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans,
 	struct btrfs_space_info *space_info;
 	int last_ptr_loop = 0;
 	int loop = 0;
+	bool found_uncached_bg = false;
 
 	WARN_ON(num_bytes < root->sectorsize);
 	btrfs_set_key_type(ins, BTRFS_EXTENT_ITEM_KEY);
@@ -3491,15 +3652,18 @@ static noinline int find_free_extent(struct btrfs_trans_handle *trans,
 	search_start = max(search_start, first_logical_byte(root, 0));
 	search_start = max(search_start, hint_byte);
 
-	if (!last_ptr) {
+	if (!last_ptr)
 		empty_cluster = 0;
-		loop = 1;
-	}
 
 	if (search_start == hint_byte) {
 		block_group = btrfs_lookup_block_group(root->fs_info,
 						       search_start);
-		if (block_group && block_group_bits(block_group, data)) {
+		/*
+		 * we don't want to use the block group if it doesn't match our
+		 * allocation bits, or if its not cached.
+		 */
+		if (block_group && block_group_bits(block_group, data) &&
+		    block_group_cache_done(block_group)) {
 			down_read(&space_info->groups_sem);
 			if (list_empty(&block_group->list) ||
 			    block_group->ro) {
@@ -3522,21 +3686,35 @@ search:
 	down_read(&space_info->groups_sem);
 	list_for_each_entry(block_group, &space_info->block_groups, list) {
 		u64 offset;
+		int cached;
 
 		atomic_inc(&block_group->count);
 		search_start = block_group->key.objectid;
 
 have_block_group:
-		if (unlikely(!block_group->cached)) {
-			mutex_lock(&block_group->cache_mutex);
-			ret = cache_block_group(root, block_group);
-			mutex_unlock(&block_group->cache_mutex);
-			if (ret) {
-				btrfs_put_block_group(block_group);
-				break;
+		if (unlikely(block_group->cached == BTRFS_CACHE_NO)) {
+			/*
+			 * we want to start caching kthreads, but not too many
+			 * right off the bat so we don't overwhelm the system,
+			 * so only start them if there are less than 2 and we're
+			 * in the initial allocation phase.
+			 */
+			if (loop > LOOP_CACHING_NOWAIT ||
+			    atomic_read(&space_info->caching_threads) < 2) {
+				ret = cache_block_group(block_group);
+				BUG_ON(ret);
 			}
 		}
 
+		cached = block_group_cache_done(block_group);
+		if (unlikely(!cached)) {
+			found_uncached_bg = true;
+
+			/* if we only want cached bgs, loop */
+			if (loop == LOOP_CACHED_ONLY)
+				goto loop;
+		}
+
 		if (unlikely(block_group->ro))
 			goto loop;
 
@@ -3615,14 +3793,21 @@ refill_cluster:
 					spin_unlock(&last_ptr->refill_lock);
 					goto checks;
 				}
+			} else if (!cached && loop > LOOP_CACHING_NOWAIT) {
+				spin_unlock(&last_ptr->refill_lock);
+
+				wait_block_group_cache_progress(block_group,
+				       num_bytes + empty_cluster + empty_size);
+				goto have_block_group;
 			}
+
 			/*
 			 * at this point we either didn't find a cluster
 			 * or we weren't able to allocate a block from our
 			 * cluster.  Free the cluster we've been trying
 			 * to use, and go to the next block group
 			 */
-			if (loop < 2) {
+			if (loop < LOOP_NO_EMPTY_SIZE) {
 				btrfs_return_cluster_to_free_space(NULL,
 								   last_ptr);
 				spin_unlock(&last_ptr->refill_lock);
@@ -3633,11 +3818,17 @@ refill_cluster:
 
 		offset = btrfs_find_space_for_alloc(block_group, search_start,
 						    num_bytes, empty_size);
-		if (!offset)
+		if (!offset && (cached || (!cached &&
+					   loop == LOOP_CACHING_NOWAIT))) {
 			goto loop;
+		} else if (!offset && (!cached &&
+				       loop > LOOP_CACHING_NOWAIT)) {
+			wait_block_group_cache_progress(block_group,
+					num_bytes + empty_size);
+			goto have_block_group;
+		}
 checks:
 		search_start = stripe_align(root, offset);
-
 		/* move on to the next group */
 		if (search_start + num_bytes >= search_end) {
 			btrfs_add_free_space(block_group, offset, num_bytes);
@@ -3683,13 +3874,26 @@ loop:
 	}
 	up_read(&space_info->groups_sem);
 
-	/* loop == 0, try to find a clustered alloc in every block group
-	 * loop == 1, try again after forcing a chunk allocation
-	 * loop == 2, set empty_size and empty_cluster to 0 and try again
+	/* LOOP_CACHED_ONLY, only search fully cached block groups
+	 * LOOP_CACHING_NOWAIT, search partially cached block groups, but
+	 *			dont wait foR them to finish caching
+	 * LOOP_CACHING_WAIT, search everything, and wait if our bg is caching
+	 * LOOP_ALLOC_CHUNK, force a chunk allocation and try again
+	 * LOOP_NO_EMPTY_SIZE, set empty_size and empty_cluster to 0 and try
+	 *			again
 	 */
-	if (!ins->objectid && loop < 3 &&
-	    (empty_size || empty_cluster || allowed_chunk_alloc)) {
-		if (loop >= 2) {
+	if (!ins->objectid && loop < LOOP_NO_EMPTY_SIZE &&
+	    (found_uncached_bg || empty_size || empty_cluster ||
+	     allowed_chunk_alloc)) {
+		if (found_uncached_bg) {
+			found_uncached_bg = false;
+			if (loop < LOOP_CACHING_WAIT) {
+				loop++;
+				goto search;
+			}
+		}
+
+		if (loop == LOOP_ALLOC_CHUNK) {
 			empty_size = 0;
 			empty_cluster = 0;
 		}
@@ -3702,7 +3906,7 @@ loop:
 			space_info->force_alloc = 1;
 		}
 
-		if (loop < 3) {
+		if (loop < LOOP_NO_EMPTY_SIZE) {
 			loop++;
 			goto search;
 		}
@@ -3798,7 +4002,7 @@ again:
 			       num_bytes, data, 1);
 		goto again;
 	}
-	if (ret) {
+	if (ret == -ENOSPC) {
 		struct btrfs_space_info *sinfo;
 
 		sinfo = __find_space_info(root->fs_info, data);
@@ -3806,7 +4010,6 @@ again:
 		       "wanted %llu\n", (unsigned long long)data,
 		       (unsigned long long)num_bytes);
 		dump_space_info(sinfo, num_bytes);
-		BUG();
 	}
 
 	return ret;
@@ -3844,7 +4047,9 @@ int btrfs_reserve_extent(struct btrfs_trans_handle *trans,
 	ret = __btrfs_reserve_extent(trans, root, num_bytes, min_alloc_size,
 				     empty_size, hint_byte, search_end, ins,
 				     data);
-	update_reserved_extents(root, ins->objectid, ins->offset, 1);
+	if (!ret)
+		update_reserved_extents(root, ins->objectid, ins->offset, 1);
+
 	return ret;
 }
 
@@ -4006,9 +4211,9 @@ int btrfs_alloc_logged_file_extent(struct btrfs_trans_handle *trans,
 	struct btrfs_block_group_cache *block_group;
 
 	block_group = btrfs_lookup_block_group(root->fs_info, ins->objectid);
-	mutex_lock(&block_group->cache_mutex);
-	cache_block_group(root, block_group);
-	mutex_unlock(&block_group->cache_mutex);
+	cache_block_group(block_group);
+	wait_event(block_group->caching_q,
+		   block_group_cache_done(block_group));
 
 	ret = btrfs_remove_free_space(block_group, ins->objectid,
 				      ins->offset);
@@ -4039,7 +4244,8 @@ static int alloc_tree_block(struct btrfs_trans_handle *trans,
 	ret = __btrfs_reserve_extent(trans, root, num_bytes, num_bytes,
 				     empty_size, hint_byte, search_end,
 				     ins, 0);
-	BUG_ON(ret);
+	if (ret)
+		return ret;
 
 	if (root_objectid == BTRFS_TREE_RELOC_OBJECTID) {
 		if (parent == 0)
@@ -6955,11 +7161,16 @@ int btrfs_free_block_groups(struct btrfs_fs_info *info)
 			 &info->block_group_cache_tree);
 		spin_unlock(&info->block_group_cache_lock);
 
-		btrfs_remove_free_space_cache(block_group);
 		down_write(&block_group->space_info->groups_sem);
 		list_del(&block_group->list);
 		up_write(&block_group->space_info->groups_sem);
 
+		if (block_group->cached == BTRFS_CACHE_STARTED)
+			wait_event(block_group->caching_q,
+				   block_group_cache_done(block_group));
+
+		btrfs_remove_free_space_cache(block_group);
+
 		WARN_ON(atomic_read(&block_group->count) != 1);
 		kfree(block_group);
 
@@ -7025,9 +7236,19 @@ int btrfs_read_block_groups(struct btrfs_root *root)
 		atomic_set(&cache->count, 1);
 		spin_lock_init(&cache->lock);
 		spin_lock_init(&cache->tree_lock);
-		mutex_init(&cache->cache_mutex);
+		cache->fs_info = info;
+		init_waitqueue_head(&cache->caching_q);
 		INIT_LIST_HEAD(&cache->list);
 		INIT_LIST_HEAD(&cache->cluster_list);
+
+		/*
+		 * we only want to have 32k of ram per block group for keeping
+		 * track of free space, and if we pass 1/2 of that we want to
+		 * start converting things over to using bitmaps
+		 */
+		cache->extents_thresh = ((1024 * 32) / 2) /
+			sizeof(struct btrfs_free_space);
+
 		read_extent_buffer(leaf, &cache->item,
 				   btrfs_item_ptr_offset(leaf, path->slots[0]),
 				   sizeof(cache->item));
@@ -7036,6 +7257,26 @@ int btrfs_read_block_groups(struct btrfs_root *root)
 		key.objectid = found_key.objectid + found_key.offset;
 		btrfs_release_path(root, path);
 		cache->flags = btrfs_block_group_flags(&cache->item);
+		cache->sectorsize = root->sectorsize;
+
+		remove_sb_from_cache(root, cache);
+
+		/*
+		 * check for two cases, either we are full, and therefore
+		 * don't need to bother with the caching work since we won't
+		 * find any space, or we are empty, and we can just add all
+		 * the space in and be done with it.  This saves us _alot_ of
+		 * time, particularly in the full case.
+		 */
+		if (found_key.offset == btrfs_block_group_used(&cache->item)) {
+			cache->cached = BTRFS_CACHE_FINISHED;
+		} else if (btrfs_block_group_used(&cache->item) == 0) {
+			cache->cached = BTRFS_CACHE_FINISHED;
+			add_new_free_space(cache, root->fs_info,
+					   found_key.objectid,
+					   found_key.objectid +
+					   found_key.offset);
+		}
 
 		ret = update_space_info(info, cache->flags, found_key.offset,
 					btrfs_block_group_used(&cache->item),
@@ -7079,10 +7320,19 @@ int btrfs_make_block_group(struct btrfs_trans_handle *trans,
 	cache->key.objectid = chunk_offset;
 	cache->key.offset = size;
 	cache->key.type = BTRFS_BLOCK_GROUP_ITEM_KEY;
+	cache->sectorsize = root->sectorsize;
+
+	/*
+	 * we only want to have 32k of ram per block group for keeping track
+	 * of free space, and if we pass 1/2 of that we want to start
+	 * converting things over to using bitmaps
+	 */
+	cache->extents_thresh = ((1024 * 32) / 2) /
+		sizeof(struct btrfs_free_space);
 	atomic_set(&cache->count, 1);
 	spin_lock_init(&cache->lock);
 	spin_lock_init(&cache->tree_lock);
-	mutex_init(&cache->cache_mutex);
+	init_waitqueue_head(&cache->caching_q);
 	INIT_LIST_HEAD(&cache->list);
 	INIT_LIST_HEAD(&cache->cluster_list);
 
@@ -7091,6 +7341,12 @@ int btrfs_make_block_group(struct btrfs_trans_handle *trans,
 	cache->flags = type;
 	btrfs_set_block_group_flags(&cache->item, type);
 
+	cache->cached = BTRFS_CACHE_FINISHED;
+	remove_sb_from_cache(root, cache);
+
+	add_new_free_space(cache, root->fs_info, chunk_offset,
+			   chunk_offset + size);
+
 	ret = update_space_info(root->fs_info, cache->flags, size, bytes_used,
 				&cache->space_info);
 	BUG_ON(ret);
@@ -7149,7 +7405,7 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
 	rb_erase(&block_group->cache_node,
 		 &root->fs_info->block_group_cache_tree);
 	spin_unlock(&root->fs_info->block_group_cache_lock);
-	btrfs_remove_free_space_cache(block_group);
+
 	down_write(&block_group->space_info->groups_sem);
 	/*
 	 * we must use list_del_init so people can check to see if they
@@ -7158,11 +7414,18 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
 	list_del_init(&block_group->list);
 	up_write(&block_group->space_info->groups_sem);
 
+	if (block_group->cached == BTRFS_CACHE_STARTED)
+		wait_event(block_group->caching_q,
+			   block_group_cache_done(block_group));
+
+	btrfs_remove_free_space_cache(block_group);
+
 	spin_lock(&block_group->space_info->lock);
 	block_group->space_info->total_bytes -= block_group->key.offset;
 	block_group->space_info->bytes_readonly -= block_group->key.offset;
 	spin_unlock(&block_group->space_info->lock);
-	block_group->space_info->full = 0;
+
+	btrfs_clear_space_info_full(root->fs_info);
 
 	btrfs_put_block_group(block_group);
 	btrfs_put_block_group(block_group);
diff --git a/fs/btrfs/free-space-cache.c b/fs/btrfs/free-space-cache.c
index 4538e48..af99b78 100644
--- a/fs/btrfs/free-space-cache.c
+++ b/fs/btrfs/free-space-cache.c
@@ -16,45 +16,46 @@
  * Boston, MA 021110-1307, USA.
  */
 
+#include <linux/pagemap.h>
 #include <linux/sched.h>
+#include <linux/math64.h>
 #include "ctree.h"
 #include "free-space-cache.h"
 #include "transaction.h"
 
-struct btrfs_free_space {
-	struct rb_node bytes_index;
-	struct rb_node offset_index;
-	u64 offset;
-	u64 bytes;
-};
+#define BITS_PER_BITMAP		(PAGE_CACHE_SIZE * 8)
+#define MAX_CACHE_BYTES_PER_GIG	(32 * 1024)
 
-static int tree_insert_offset(struct rb_root *root, u64 offset,
-			      struct rb_node *node)
+static inline unsigned long offset_to_bit(u64 bitmap_start, u64 sectorsize,
+					  u64 offset)
 {
-	struct rb_node **p = &root->rb_node;
-	struct rb_node *parent = NULL;
-	struct btrfs_free_space *info;
+	BUG_ON(offset < bitmap_start);
+	offset -= bitmap_start;
+	return (unsigned long)(div64_u64(offset, sectorsize));
+}
 
-	while (*p) {
-		parent = *p;
-		info = rb_entry(parent, struct btrfs_free_space, offset_index);
+static inline unsigned long bytes_to_bits(u64 bytes, u64 sectorsize)
+{
+	return (unsigned long)(div64_u64(bytes, sectorsize));
+}
 
-		if (offset < info->offset)
-			p = &(*p)->rb_left;
-		else if (offset > info->offset)
-			p = &(*p)->rb_right;
-		else
-			return -EEXIST;
-	}
+static inline u64 offset_to_bitmap(struct btrfs_block_group_cache *block_group,
+				   u64 offset)
+{
+	u64 bitmap_start;
+	u64 bytes_per_bitmap;
 
-	rb_link_node(node, parent, p);
-	rb_insert_color(node, root);
+	bytes_per_bitmap = BITS_PER_BITMAP * block_group->sectorsize;
+	bitmap_start = offset - block_group->key.objectid;
+	bitmap_start = div64_u64(bitmap_start, bytes_per_bitmap);
+	bitmap_start *= bytes_per_bitmap;
+	bitmap_start += block_group->key.objectid;
 
-	return 0;
+	return bitmap_start;
 }
 
-static int tree_insert_bytes(struct rb_root *root, u64 bytes,
-			     struct rb_node *node)
+static int tree_insert_offset(struct rb_root *root, u64 offset,
+			      struct rb_node *node, int bitmap)
 {
 	struct rb_node **p = &root->rb_node;
 	struct rb_node *parent = NULL;
@@ -62,12 +63,34 @@ static int tree_insert_bytes(struct rb_root *root, u64 bytes,
 
 	while (*p) {
 		parent = *p;
-		info = rb_entry(parent, struct btrfs_free_space, bytes_index);
+		info = rb_entry(parent, struct btrfs_free_space, offset_index);
 
-		if (bytes < info->bytes)
+		if (offset < info->offset) {
 			p = &(*p)->rb_left;
-		else
+		} else if (offset > info->offset) {
 			p = &(*p)->rb_right;
+		} else {
+			/*
+			 * we could have a bitmap entry and an extent entry
+			 * share the same offset.  If this is the case, we want
+			 * the extent entry to always be found first if we do a
+			 * linear search through the tree, since we want to have
+			 * the quickest allocation time, and allocating from an
+			 * extent is faster than allocating from a bitmap.  So
+			 * if we're inserting a bitmap and we find an entry at
+			 * this offset, we want to go right, or after this entry
+			 * logically.  If we are inserting an extent and we've
+			 * found a bitmap, we want to go left, or before
+			 * logically.
+			 */
+			if (bitmap) {
+				WARN_ON(info->bitmap);
+				p = &(*p)->rb_right;
+			} else {
+				WARN_ON(!info->bitmap);
+				p = &(*p)->rb_left;
+			}
+		}
 	}
 
 	rb_link_node(node, parent, p);
@@ -79,110 +102,143 @@ static int tree_insert_bytes(struct rb_root *root, u64 bytes,
 /*
  * searches the tree for the given offset.
  *
- * fuzzy == 1: this is used for allocations where we are given a hint of where
- * to look for free space.  Because the hint may not be completely on an offset
- * mark, or the hint may no longer point to free space we need to fudge our
- * results a bit.  So we look for free space starting at or after offset with at
- * least bytes size.  We prefer to find as close to the given offset as we can.
- * Also if the offset is within a free space range, then we will return the free
- * space that contains the given offset, which means we can return a free space
- * chunk with an offset before the provided offset.
- *
- * fuzzy == 0: this is just a normal tree search.  Give us the free space that
- * starts at the given offset which is at least bytes size, and if its not there
- * return NULL.
+ * fuzzy - If this is set, then we are trying to make an allocation, and we just
+ * want a section that has at least bytes size and comes at or after the given
+ * offset.
  */
-static struct btrfs_free_space *tree_search_offset(struct rb_root *root,
-						   u64 offset, u64 bytes,
-						   int fuzzy)
+static struct btrfs_free_space *
+tree_search_offset(struct btrfs_block_group_cache *block_group,
+		   u64 offset, int bitmap_only, int fuzzy)
 {
-	struct rb_node *n = root->rb_node;
-	struct btrfs_free_space *entry, *ret = NULL;
+	struct rb_node *n = block_group->free_space_offset.rb_node;
+	struct btrfs_free_space *entry, *prev = NULL;
+
+	/* find entry that is closest to the 'offset' */
+	while (1) {
+		if (!n) {
+			entry = NULL;
+			break;
+		}
 
-	while (n) {
 		entry = rb_entry(n, struct btrfs_free_space, offset_index);
+		prev = entry;
 
-		if (offset < entry->offset) {
-			if (fuzzy &&
-			    (!ret || entry->offset < ret->offset) &&
-			    (bytes <= entry->bytes))
-				ret = entry;
+		if (offset < entry->offset)
 			n = n->rb_left;
-		} else if (offset > entry->offset) {
-			if (fuzzy &&
-			    (entry->offset + entry->bytes - 1) >= offset &&
-			    bytes <= entry->bytes) {
-				ret = entry;
-				break;
-			}
+		else if (offset > entry->offset)
 			n = n->rb_right;
-		} else {
-			if (bytes > entry->bytes) {
-				n = n->rb_right;
-				continue;
-			}
-			ret = entry;
+		else
 			break;
-		}
 	}
 
-	return ret;
-}
-
-/*
- * return a chunk at least bytes size, as close to offset that we can get.
- */
-static struct btrfs_free_space *tree_search_bytes(struct rb_root *root,
-						  u64 offset, u64 bytes)
-{
-	struct rb_node *n = root->rb_node;
-	struct btrfs_free_space *entry, *ret = NULL;
+	if (bitmap_only) {
+		if (!entry)
+			return NULL;
+		if (entry->bitmap)
+			return entry;
 
-	while (n) {
-		entry = rb_entry(n, struct btrfs_free_space, bytes_index);
+		/*
+		 * bitmap entry and extent entry may share same offset,
+		 * in that case, bitmap entry comes after extent entry.
+		 */
+		n = rb_next(n);
+		if (!n)
+			return NULL;
+		entry = rb_entry(n, struct btrfs_free_space, offset_index);
+		if (entry->offset != offset)
+			return NULL;
 
-		if (bytes < entry->bytes) {
+		WARN_ON(!entry->bitmap);
+		return entry;
+	} else if (entry) {
+		if (entry->bitmap) {
 			/*
-			 * We prefer to get a hole size as close to the size we
-			 * are asking for so we don't take small slivers out of
-			 * huge holes, but we also want to get as close to the
-			 * offset as possible so we don't have a whole lot of
-			 * fragmentation.
+			 * if previous extent entry covers the offset,
+			 * we should return it instead of the bitmap entry
 			 */
-			if (offset <= entry->offset) {
-				if (!ret)
-					ret = entry;
-				else if (entry->bytes < ret->bytes)
-					ret = entry;
-				else if (entry->offset < ret->offset)
-					ret = entry;
+			n = &entry->offset_index;
+			while (1) {
+				n = rb_prev(n);
+				if (!n)
+					break;
+				prev = rb_entry(n, struct btrfs_free_space,
+						offset_index);
+				if (!prev->bitmap) {
+					if (prev->offset + prev->bytes > offset)
+						entry = prev;
+					break;
+				}
 			}
-			n = n->rb_left;
-		} else if (bytes > entry->bytes) {
-			n = n->rb_right;
+		}
+		return entry;
+	}
+
+	if (!prev)
+		return NULL;
+
+	/* find last entry before the 'offset' */
+	entry = prev;
+	if (entry->offset > offset) {
+		n = rb_prev(&entry->offset_index);
+		if (n) {
+			entry = rb_entry(n, struct btrfs_free_space,
+					offset_index);
+			BUG_ON(entry->offset > offset);
 		} else {
-			/*
-			 * Ok we may have multiple chunks of the wanted size,
-			 * so we don't want to take the first one we find, we
-			 * want to take the one closest to our given offset, so
-			 * keep searching just in case theres a better match.
-			 */
-			n = n->rb_right;
-			if (offset > entry->offset)
-				continue;
-			else if (!ret || entry->offset < ret->offset)
-				ret = entry;
+			if (fuzzy)
+				return entry;
+			else
+				return NULL;
 		}
 	}
 
-	return ret;
+	if (entry->bitmap) {
+		n = &entry->offset_index;
+		while (1) {
+			n = rb_prev(n);
+			if (!n)
+				break;
+			prev = rb_entry(n, struct btrfs_free_space,
+					offset_index);
+			if (!prev->bitmap) {
+				if (prev->offset + prev->bytes > offset)
+					return prev;
+				break;
+			}
+		}
+		if (entry->offset + BITS_PER_BITMAP *
+		    block_group->sectorsize > offset)
+			return entry;
+	} else if (entry->offset + entry->bytes > offset)
+		return entry;
+
+	if (!fuzzy)
+		return NULL;
+
+	while (1) {
+		if (entry->bitmap) {
+			if (entry->offset + BITS_PER_BITMAP *
+			    block_group->sectorsize > offset)
+				break;
+		} else {
+			if (entry->offset + entry->bytes > offset)
+				break;
+		}
+
+		n = rb_next(&entry->offset_index);
+		if (!n)
+			return NULL;
+		entry = rb_entry(n, struct btrfs_free_space, offset_index);
+	}
+	return entry;
 }
 
 static void unlink_free_space(struct btrfs_block_group_cache *block_group,
 			      struct btrfs_free_space *info)
 {
 	rb_erase(&info->offset_index, &block_group->free_space_offset);
-	rb_erase(&info->bytes_index, &block_group->free_space_bytes);
+	block_group->free_extents--;
+	block_group->free_space -= info->bytes;
 }
 
 static int link_free_space(struct btrfs_block_group_cache *block_group,
@@ -190,17 +246,314 @@ static int link_free_space(struct btrfs_block_group_cache *block_group,
 {
 	int ret = 0;
 
-
-	BUG_ON(!info->bytes);
+	BUG_ON(!info->bitmap && !info->bytes);
 	ret = tree_insert_offset(&block_group->free_space_offset, info->offset,
-				 &info->offset_index);
+				 &info->offset_index, (info->bitmap != NULL));
 	if (ret)
 		return ret;
 
-	ret = tree_insert_bytes(&block_group->free_space_bytes, info->bytes,
-				&info->bytes_index);
-	if (ret)
-		return ret;
+	block_group->free_space += info->bytes;
+	block_group->free_extents++;
+	return ret;
+}
+
+static void recalculate_thresholds(struct btrfs_block_group_cache *block_group)
+{
+	u64 max_bytes, possible_bytes;
+
+	/*
+	 * The goal is to keep the total amount of memory used per 1gb of space
+	 * at or below 32k, so we need to adjust how much memory we allow to be
+	 * used by extent based free space tracking
+	 */
+	max_bytes = MAX_CACHE_BYTES_PER_GIG *
+		(div64_u64(block_group->key.offset, 1024 * 1024 * 1024));
+
+	possible_bytes = (block_group->total_bitmaps * PAGE_CACHE_SIZE) +
+		(sizeof(struct btrfs_free_space) *
+		 block_group->extents_thresh);
+
+	if (possible_bytes > max_bytes) {
+		int extent_bytes = max_bytes -
+			(block_group->total_bitmaps * PAGE_CACHE_SIZE);
+
+		if (extent_bytes <= 0) {
+			block_group->extents_thresh = 0;
+			return;
+		}
+
+		block_group->extents_thresh = extent_bytes /
+			(sizeof(struct btrfs_free_space));
+	}
+}
+
+static void bitmap_clear_bits(struct btrfs_block_group_cache *block_group,
+			      struct btrfs_free_space *info, u64 offset,
+			      u64 bytes)
+{
+	unsigned long start, end;
+	unsigned long i;
+
+	start = offset_to_bit(info->offset, block_group->sectorsize, offset);
+	end = start + bytes_to_bits(bytes, block_group->sectorsize);
+	BUG_ON(end > BITS_PER_BITMAP);
+
+	for (i = start; i < end; i++)
+		clear_bit(i, info->bitmap);
+
+	info->bytes -= bytes;
+	block_group->free_space -= bytes;
+}
+
+static void bitmap_set_bits(struct btrfs_block_group_cache *block_group,
+			    struct btrfs_free_space *info, u64 offset,
+			    u64 bytes)
+{
+	unsigned long start, end;
+	unsigned long i;
+
+	start = offset_to_bit(info->offset, block_group->sectorsize, offset);
+	end = start + bytes_to_bits(bytes, block_group->sectorsize);
+	BUG_ON(end > BITS_PER_BITMAP);
+
+	for (i = start; i < end; i++)
+		set_bit(i, info->bitmap);
+
+	info->bytes += bytes;
+	block_group->free_space += bytes;
+}
+
+static int search_bitmap(struct btrfs_block_group_cache *block_group,
+			 struct btrfs_free_space *bitmap_info, u64 *offset,
+			 u64 *bytes)
+{
+	unsigned long found_bits = 0;
+	unsigned long bits, i;
+	unsigned long next_zero;
+
+	i = offset_to_bit(bitmap_info->offset, block_group->sectorsize,
+			  max_t(u64, *offset, bitmap_info->offset));
+	bits = bytes_to_bits(*bytes, block_group->sectorsize);
+
+	for (i = find_next_bit(bitmap_info->bitmap, BITS_PER_BITMAP, i);
+	     i < BITS_PER_BITMAP;
+	     i = find_next_bit(bitmap_info->bitmap, BITS_PER_BITMAP, i + 1)) {
+		next_zero = find_next_zero_bit(bitmap_info->bitmap,
+					       BITS_PER_BITMAP, i);
+		if ((next_zero - i) >= bits) {
+			found_bits = next_zero - i;
+			break;
+		}
+		i = next_zero;
+	}
+
+	if (found_bits) {
+		*offset = (u64)(i * block_group->sectorsize) +
+			bitmap_info->offset;
+		*bytes = (u64)(found_bits) * block_group->sectorsize;
+		return 0;
+	}
+
+	return -1;
+}
+
+static struct btrfs_free_space *find_free_space(struct btrfs_block_group_cache
+						*block_group, u64 *offset,
+						u64 *bytes, int debug)
+{
+	struct btrfs_free_space *entry;
+	struct rb_node *node;
+	int ret;
+
+	if (!block_group->free_space_offset.rb_node)
+		return NULL;
+
+	entry = tree_search_offset(block_group,
+				   offset_to_bitmap(block_group, *offset),
+				   0, 1);
+	if (!entry)
+		return NULL;
+
+	for (node = &entry->offset_index; node; node = rb_next(node)) {
+		entry = rb_entry(node, struct btrfs_free_space, offset_index);
+		if (entry->bytes < *bytes)
+			continue;
+
+		if (entry->bitmap) {
+			ret = search_bitmap(block_group, entry, offset, bytes);
+			if (!ret)
+				return entry;
+			continue;
+		}
+
+		*offset = entry->offset;
+		*bytes = entry->bytes;
+		return entry;
+	}
+
+	return NULL;
+}
+
+static void add_new_bitmap(struct btrfs_block_group_cache *block_group,
+			   struct btrfs_free_space *info, u64 offset)
+{
+	u64 bytes_per_bg = BITS_PER_BITMAP * block_group->sectorsize;
+	int max_bitmaps = (int)div64_u64(block_group->key.offset +
+					 bytes_per_bg - 1, bytes_per_bg);
+	BUG_ON(block_group->total_bitmaps >= max_bitmaps);
+
+	info->offset = offset_to_bitmap(block_group, offset);
+	link_free_space(block_group, info);
+	block_group->total_bitmaps++;
+
+	recalculate_thresholds(block_group);
+}
+
+static noinline int remove_from_bitmap(struct btrfs_block_group_cache *block_group,
+			      struct btrfs_free_space *bitmap_info,
+			      u64 *offset, u64 *bytes)
+{
+	u64 end;
+
+again:
+	end = bitmap_info->offset +
+		(u64)(BITS_PER_BITMAP * block_group->sectorsize) - 1;
+
+	if (*offset > bitmap_info->offset && *offset + *bytes > end) {
+		bitmap_clear_bits(block_group, bitmap_info, *offset,
+				  end - *offset + 1);
+		*bytes -= end - *offset + 1;
+		*offset = end + 1;
+	} else if (*offset >= bitmap_info->offset && *offset + *bytes <= end) {
+		bitmap_clear_bits(block_group, bitmap_info, *offset, *bytes);
+		*bytes = 0;
+	}
+
+	if (*bytes) {
+		if (!bitmap_info->bytes) {
+			unlink_free_space(block_group, bitmap_info);
+			kfree(bitmap_info->bitmap);
+			kfree(bitmap_info);
+			block_group->total_bitmaps--;
+			recalculate_thresholds(block_group);
+		}
+
+		bitmap_info = tree_search_offset(block_group,
+						 offset_to_bitmap(block_group,
+								  *offset),
+						 1, 0);
+		if (!bitmap_info)
+			return -EINVAL;
+
+		if (!bitmap_info->bitmap)
+			return -EAGAIN;
+
+		goto again;
+	} else if (!bitmap_info->bytes) {
+		unlink_free_space(block_group, bitmap_info);
+		kfree(bitmap_info->bitmap);
+		kfree(bitmap_info);
+		block_group->total_bitmaps--;
+		recalculate_thresholds(block_group);
+	}
+
+	return 0;
+}
+
+static int insert_into_bitmap(struct btrfs_block_group_cache *block_group,
+			      struct btrfs_free_space *info)
+{
+	struct btrfs_free_space *bitmap_info;
+	int added = 0;
+	u64 bytes, offset, end;
+	int ret;
+
+	/*
+	 * If we are below the extents threshold then we can add this as an
+	 * extent, and don't have to deal with the bitmap
+	 */
+	if (block_group->free_extents < block_group->extents_thresh &&
+	    info->bytes > block_group->sectorsize * 4)
+		return 0;
+
+	/*
+	 * some block groups are so tiny they can't be enveloped by a bitmap, so
+	 * don't even bother to create a bitmap for this
+	 */
+	if (BITS_PER_BITMAP * block_group->sectorsize >
+	    block_group->key.offset)
+		return 0;
+
+	bytes = info->bytes;
+	offset = info->offset;
+
+again:
+	bitmap_info = tree_search_offset(block_group,
+					 offset_to_bitmap(block_group, offset),
+					 1, 0);
+	if (!bitmap_info) {
+		BUG_ON(added);
+		goto new_bitmap;
+	}
+
+	end = bitmap_info->offset +
+		(u64)(BITS_PER_BITMAP * block_group->sectorsize);
+
+	if (offset >= bitmap_info->offset && offset + bytes > end) {
+		bitmap_set_bits(block_group, bitmap_info, offset,
+				end - offset);
+		bytes -= end - offset;
+		offset = end;
+		added = 0;
+	} else if (offset >= bitmap_info->offset && offset + bytes <= end) {
+		bitmap_set_bits(block_group, bitmap_info, offset, bytes);
+		bytes = 0;
+	} else {
+		BUG();
+	}
+
+	if (!bytes) {
+		ret = 1;
+		goto out;
+	} else
+		goto again;
+
+new_bitmap:
+	if (info && info->bitmap) {
+		add_new_bitmap(block_group, info, offset);
+		added = 1;
+		info = NULL;
+		goto again;
+	} else {
+		spin_unlock(&block_group->tree_lock);
+
+		/* no pre-allocated info, allocate a new one */
+		if (!info) {
+			info = kzalloc(sizeof(struct btrfs_free_space),
+				       GFP_NOFS);
+			if (!info) {
+				spin_lock(&block_group->tree_lock);
+				ret = -ENOMEM;
+				goto out;
+			}
+		}
+
+		/* allocate the bitmap */
+		info->bitmap = kzalloc(PAGE_CACHE_SIZE, GFP_NOFS);
+		spin_lock(&block_group->tree_lock);
+		if (!info->bitmap) {
+			ret = -ENOMEM;
+			goto out;
+		}
+		goto again;
+	}
+
+out:
+	if (info) {
+		if (info->bitmap)
+			kfree(info->bitmap);
+		kfree(info);
+	}
 
 	return ret;
 }
@@ -208,8 +561,8 @@ static int link_free_space(struct btrfs_block_group_cache *block_group,
 int btrfs_add_free_space(struct btrfs_block_group_cache *block_group,
 			 u64 offset, u64 bytes)
 {
-	struct btrfs_free_space *right_info;
-	struct btrfs_free_space *left_info;
+	struct btrfs_free_space *right_info = NULL;
+	struct btrfs_free_space *left_info = NULL;
 	struct btrfs_free_space *info = NULL;
 	int ret = 0;
 
@@ -227,18 +580,38 @@ int btrfs_add_free_space(struct btrfs_block_group_cache *block_group,
 	 * are adding, if there is remove that struct and add a new one to
 	 * cover the entire range
 	 */
-	right_info = tree_search_offset(&block_group->free_space_offset,
-					offset+bytes, 0, 0);
-	left_info = tree_search_offset(&block_group->free_space_offset,
-				       offset-1, 0, 1);
+	right_info = tree_search_offset(block_group, offset + bytes, 0, 0);
+	if (right_info && rb_prev(&right_info->offset_index))
+		left_info = rb_entry(rb_prev(&right_info->offset_index),
+				     struct btrfs_free_space, offset_index);
+	else
+		left_info = tree_search_offset(block_group, offset - 1, 0, 0);
 
-	if (right_info) {
+	/*
+	 * If there was no extent directly to the left or right of this new
+	 * extent then we know we're going to have to allocate a new extent, so
+	 * before we do that see if we need to drop this into a bitmap
+	 */
+	if ((!left_info || left_info->bitmap) &&
+	    (!right_info || right_info->bitmap)) {
+		ret = insert_into_bitmap(block_group, info);
+
+		if (ret < 0) {
+			goto out;
+		} else if (ret) {
+			ret = 0;
+			goto out;
+		}
+	}
+
+	if (right_info && !right_info->bitmap) {
 		unlink_free_space(block_group, right_info);
 		info->bytes += right_info->bytes;
 		kfree(right_info);
 	}
 
-	if (left_info && left_info->offset + left_info->bytes == offset) {
+	if (left_info && !left_info->bitmap &&
+	    left_info->offset + left_info->bytes == offset) {
 		unlink_free_space(block_group, left_info);
 		info->offset = left_info->offset;
 		info->bytes += left_info->bytes;
@@ -248,11 +621,11 @@ int btrfs_add_free_space(struct btrfs_block_group_cache *block_group,
 	ret = link_free_space(block_group, info);
 	if (ret)
 		kfree(info);
-
+out:
 	spin_unlock(&block_group->tree_lock);
 
 	if (ret) {
-		printk(KERN_ERR "btrfs: unable to add free space :%d\n", ret);
+		printk(KERN_CRIT "btrfs: unable to add free space :%d\n", ret);
 		BUG_ON(ret == -EEXIST);
 	}
 
@@ -263,40 +636,65 @@ int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group,
 			    u64 offset, u64 bytes)
 {
 	struct btrfs_free_space *info;
+	struct btrfs_free_space *next_info = NULL;
 	int ret = 0;
 
 	spin_lock(&block_group->tree_lock);
 
-	info = tree_search_offset(&block_group->free_space_offset, offset, 0,
-				  1);
-	if (info && info->offset == offset) {
-		if (info->bytes < bytes) {
-			printk(KERN_ERR "Found free space at %llu, size %llu,"
-			       "trying to use %llu\n",
-			       (unsigned long long)info->offset,
-			       (unsigned long long)info->bytes,
-			       (unsigned long long)bytes);
+again:
+	info = tree_search_offset(block_group, offset, 0, 0);
+	if (!info) {
+		WARN_ON(1);
+		goto out_lock;
+	}
+
+	if (info->bytes < bytes && rb_next(&info->offset_index)) {
+		u64 end;
+		next_info = rb_entry(rb_next(&info->offset_index),
+					     struct btrfs_free_space,
+					     offset_index);
+
+		if (next_info->bitmap)
+			end = next_info->offset + BITS_PER_BITMAP *
+				block_group->sectorsize - 1;
+		else
+			end = next_info->offset + next_info->bytes;
+
+		if (next_info->bytes < bytes ||
+		    next_info->offset > offset || offset > end) {
+			printk(KERN_CRIT "Found free space at %llu, size %llu,"
+			      " trying to use %llu\n",
+			      (unsigned long long)info->offset,
+			      (unsigned long long)info->bytes,
+			      (unsigned long long)bytes);
 			WARN_ON(1);
 			ret = -EINVAL;
-			spin_unlock(&block_group->tree_lock);
-			goto out;
+			goto out_lock;
 		}
-		unlink_free_space(block_group, info);
 
-		if (info->bytes == bytes) {
-			kfree(info);
-			spin_unlock(&block_group->tree_lock);
-			goto out;
+		info = next_info;
+	}
+
+	if (info->bytes == bytes) {
+		unlink_free_space(block_group, info);
+		if (info->bitmap) {
+			kfree(info->bitmap);
+			block_group->total_bitmaps--;
 		}
+		kfree(info);
+		goto out_lock;
+	}
 
+	if (!info->bitmap && info->offset == offset) {
+		unlink_free_space(block_group, info);
 		info->offset += bytes;
 		info->bytes -= bytes;
+		link_free_space(block_group, info);
+		goto out_lock;
+	}
 
-		ret = link_free_space(block_group, info);
-		spin_unlock(&block_group->tree_lock);
-		BUG_ON(ret);
-	} else if (info && info->offset < offset &&
-		   info->offset + info->bytes >= offset + bytes) {
+	if (!info->bitmap && info->offset <= offset &&
+	    info->offset + info->bytes >= offset + bytes) {
 		u64 old_start = info->offset;
 		/*
 		 * we're freeing space in the middle of the info,
@@ -312,7 +710,9 @@ int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group,
 			info->offset = offset + bytes;
 			info->bytes = old_end - info->offset;
 			ret = link_free_space(block_group, info);
-			BUG_ON(ret);
+			WARN_ON(ret);
+			if (ret)
+				goto out_lock;
 		} else {
 			/* the hole we're creating ends at the end
 			 * of the info struct, just free the info
@@ -320,32 +720,22 @@ int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group,
 			kfree(info);
 		}
 		spin_unlock(&block_group->tree_lock);
-		/* step two, insert a new info struct to cover anything
-		 * before the hole
+
+		/* step two, insert a new info struct to cover
+		 * anything before the hole
 		 */
 		ret = btrfs_add_free_space(block_group, old_start,
 					   offset - old_start);
-		BUG_ON(ret);
-	} else {
-		spin_unlock(&block_group->tree_lock);
-		if (!info) {
-			printk(KERN_ERR "couldn't find space %llu to free\n",
-			       (unsigned long long)offset);
-			printk(KERN_ERR "cached is %d, offset %llu bytes %llu\n",
-			       block_group->cached,
-			       (unsigned long long)block_group->key.objectid,
-			       (unsigned long long)block_group->key.offset);
-			btrfs_dump_free_space(block_group, bytes);
-		} else if (info) {
-			printk(KERN_ERR "hmm, found offset=%llu bytes=%llu, "
-			       "but wanted offset=%llu bytes=%llu\n",
-			       (unsigned long long)info->offset,
-			       (unsigned long long)info->bytes,
-			       (unsigned long long)offset,
-			       (unsigned long long)bytes);
-		}
-		WARN_ON(1);
+		WARN_ON(ret);
+		goto out;
 	}
+
+	ret = remove_from_bitmap(block_group, info, &offset, &bytes);
+	if (ret == -EAGAIN)
+		goto again;
+	BUG_ON(ret);
+out_lock:
+	spin_unlock(&block_group->tree_lock);
 out:
 	return ret;
 }
@@ -361,10 +751,13 @@ void btrfs_dump_free_space(struct btrfs_block_group_cache *block_group,
 		info = rb_entry(n, struct btrfs_free_space, offset_index);
 		if (info->bytes >= bytes)
 			count++;
-		printk(KERN_ERR "entry offset %llu, bytes %llu\n",
+		printk(KERN_CRIT "entry offset %llu, bytes %llu, bitmap %s\n",
 		       (unsigned long long)info->offset,
-		       (unsigned long long)info->bytes);
+		       (unsigned long long)info->bytes,
+		       (info->bitmap) ? "yes" : "no");
 	}
+	printk(KERN_INFO "block group has cluster?: %s\n",
+	       list_empty(&block_group->cluster_list) ? "no" : "yes");
 	printk(KERN_INFO "%d blocks of free space at or bigger than bytes is"
 	       "\n", count);
 }
@@ -397,26 +790,35 @@ __btrfs_return_cluster_to_free_space(
 {
 	struct btrfs_free_space *entry;
 	struct rb_node *node;
+	bool bitmap;
 
 	spin_lock(&cluster->lock);
 	if (cluster->block_group != block_group)
 		goto out;
 
+	bitmap = cluster->points_to_bitmap;
+	cluster->block_group = NULL;
 	cluster->window_start = 0;
+	list_del_init(&cluster->block_group_list);
+	cluster->points_to_bitmap = false;
+
+	if (bitmap)
+		goto out;
+
 	node = rb_first(&cluster->root);
-	while(node) {
+	while (node) {
 		entry = rb_entry(node, struct btrfs_free_space, offset_index);
 		node = rb_next(&entry->offset_index);
 		rb_erase(&entry->offset_index, &cluster->root);
-		link_free_space(block_group, entry);
+		BUG_ON(entry->bitmap);
+		tree_insert_offset(&block_group->free_space_offset,
+				   entry->offset, &entry->offset_index, 0);
 	}
-	list_del_init(&cluster->block_group_list);
-
-	btrfs_put_block_group(cluster->block_group);
-	cluster->block_group = NULL;
 	cluster->root.rb_node = NULL;
+
 out:
 	spin_unlock(&cluster->lock);
+	btrfs_put_block_group(block_group);
 	return 0;
 }
 
@@ -425,20 +827,28 @@ void btrfs_remove_free_space_cache(struct btrfs_block_group_cache *block_group)
 	struct btrfs_free_space *info;
 	struct rb_node *node;
 	struct btrfs_free_cluster *cluster;
-	struct btrfs_free_cluster *safe;
+	struct list_head *head;
 
 	spin_lock(&block_group->tree_lock);
-
-	list_for_each_entry_safe(cluster, safe, &block_group->cluster_list,
-				 block_group_list) {
+	while ((head = block_group->cluster_list.next) !=
+	       &block_group->cluster_list) {
+		cluster = list_entry(head, struct btrfs_free_cluster,
+				     block_group_list);
 
 		WARN_ON(cluster->block_group != block_group);
 		__btrfs_return_cluster_to_free_space(block_group, cluster);
+		if (need_resched()) {
+			spin_unlock(&block_group->tree_lock);
+			cond_resched();
+			spin_lock(&block_group->tree_lock);
+		}
 	}
 
-	while ((node = rb_last(&block_group->free_space_bytes)) != NULL) {
-		info = rb_entry(node, struct btrfs_free_space, bytes_index);
+	while ((node = rb_last(&block_group->free_space_offset)) != NULL) {
+		info = rb_entry(node, struct btrfs_free_space, offset_index);
 		unlink_free_space(block_group, info);
+		if (info->bitmap)
+			kfree(info->bitmap);
 		kfree(info);
 		if (need_resched()) {
 			spin_unlock(&block_group->tree_lock);
@@ -446,6 +856,7 @@ void btrfs_remove_free_space_cache(struct btrfs_block_group_cache *block_group)
 			spin_lock(&block_group->tree_lock);
 		}
 	}
+
 	spin_unlock(&block_group->tree_lock);
 }
 
@@ -453,25 +864,35 @@ u64 btrfs_find_space_for_alloc(struct btrfs_block_group_cache *block_group,
 			       u64 offset, u64 bytes, u64 empty_size)
 {
 	struct btrfs_free_space *entry = NULL;
+	u64 bytes_search = bytes + empty_size;
 	u64 ret = 0;
 
 	spin_lock(&block_group->tree_lock);
-	entry = tree_search_offset(&block_group->free_space_offset, offset,
-				   bytes + empty_size, 1);
+	entry = find_free_space(block_group, &offset, &bytes_search, 0);
 	if (!entry)
-		entry = tree_search_bytes(&block_group->free_space_bytes,
-					  offset, bytes + empty_size);
-	if (entry) {
+		goto out;
+
+	ret = offset;
+	if (entry->bitmap) {
+		bitmap_clear_bits(block_group, entry, offset, bytes);
+		if (!entry->bytes) {
+			unlink_free_space(block_group, entry);
+			kfree(entry->bitmap);
+			kfree(entry);
+			block_group->total_bitmaps--;
+			recalculate_thresholds(block_group);
+		}
+	} else {
 		unlink_free_space(block_group, entry);
-		ret = entry->offset;
 		entry->offset += bytes;
 		entry->bytes -= bytes;
-
 		if (!entry->bytes)
 			kfree(entry);
 		else
 			link_free_space(block_group, entry);
 	}
+
+out:
 	spin_unlock(&block_group->tree_lock);
 
 	return ret;
@@ -517,6 +938,47 @@ int btrfs_return_cluster_to_free_space(
 	return ret;
 }
 
+static u64 btrfs_alloc_from_bitmap(struct btrfs_block_group_cache *block_group,
+				   struct btrfs_free_cluster *cluster,
+				   u64 bytes, u64 min_start)
+{
+	struct btrfs_free_space *entry;
+	int err;
+	u64 search_start = cluster->window_start;
+	u64 search_bytes = bytes;
+	u64 ret = 0;
+
+	spin_lock(&block_group->tree_lock);
+	spin_lock(&cluster->lock);
+
+	if (!cluster->points_to_bitmap)
+		goto out;
+
+	if (cluster->block_group != block_group)
+		goto out;
+
+	entry = tree_search_offset(block_group, search_start, 0, 0);
+
+	if (!entry || !entry->bitmap)
+		goto out;
+
+	search_start = min_start;
+	search_bytes = bytes;
+
+	err = search_bitmap(block_group, entry, &search_start,
+			    &search_bytes);
+	if (err)
+		goto out;
+
+	ret = search_start;
+	bitmap_clear_bits(block_group, entry, ret, bytes);
+out:
+	spin_unlock(&cluster->lock);
+	spin_unlock(&block_group->tree_lock);
+
+	return ret;
+}
+
 /*
  * given a cluster, try to allocate 'bytes' from it, returns 0
  * if it couldn't find anything suitably large, or a logical disk offset
@@ -530,6 +992,10 @@ u64 btrfs_alloc_from_cluster(struct btrfs_block_group_cache *block_group,
 	struct rb_node *node;
 	u64 ret = 0;
 
+	if (cluster->points_to_bitmap)
+		return btrfs_alloc_from_bitmap(block_group, cluster, bytes,
+					       min_start);
+
 	spin_lock(&cluster->lock);
 	if (bytes > cluster->max_size)
 		goto out;
@@ -567,9 +1033,73 @@ u64 btrfs_alloc_from_cluster(struct btrfs_block_group_cache *block_group,
 	}
 out:
 	spin_unlock(&cluster->lock);
+
 	return ret;
 }
 
+static int btrfs_bitmap_cluster(struct btrfs_block_group_cache *block_group,
+				struct btrfs_free_space *entry,
+				struct btrfs_free_cluster *cluster,
+				u64 offset, u64 bytes, u64 min_bytes)
+{
+	unsigned long next_zero;
+	unsigned long i;
+	unsigned long search_bits;
+	unsigned long total_bits;
+	unsigned long found_bits;
+	unsigned long start = 0;
+	unsigned long total_found = 0;
+	bool found = false;
+
+	i = offset_to_bit(entry->offset, block_group->sectorsize,
+			  max_t(u64, offset, entry->offset));
+	search_bits = bytes_to_bits(min_bytes, block_group->sectorsize);
+	total_bits = bytes_to_bits(bytes, block_group->sectorsize);
+
+again:
+	found_bits = 0;
+	for (i = find_next_bit(entry->bitmap, BITS_PER_BITMAP, i);
+	     i < BITS_PER_BITMAP;
+	     i = find_next_bit(entry->bitmap, BITS_PER_BITMAP, i + 1)) {
+		next_zero = find_next_zero_bit(entry->bitmap,
+					       BITS_PER_BITMAP, i);
+		if (next_zero - i >= search_bits) {
+			found_bits = next_zero - i;
+			break;
+		}
+		i = next_zero;
+	}
+
+	if (!found_bits)
+		return -1;
+
+	if (!found) {
+		start = i;
+		found = true;
+	}
+
+	total_found += found_bits;
+
+	if (cluster->max_size < found_bits * block_group->sectorsize)
+		cluster->max_size = found_bits * block_group->sectorsize;
+
+	if (total_found < total_bits) {
+		i = find_next_bit(entry->bitmap, BITS_PER_BITMAP, next_zero);
+		if (i - start > total_bits * 2) {
+			total_found = 0;
+			cluster->max_size = 0;
+			found = false;
+		}
+		goto again;
+	}
+
+	cluster->window_start = start * block_group->sectorsize +
+		entry->offset;
+	cluster->points_to_bitmap = true;
+
+	return 0;
+}
+
 /*
  * here we try to find a cluster of blocks in a block group.  The goal
  * is to find at least bytes free and up to empty_size + bytes free.
@@ -587,12 +1117,12 @@ int btrfs_find_space_cluster(struct btrfs_trans_handle *trans,
 	struct btrfs_free_space *entry = NULL;
 	struct rb_node *node;
 	struct btrfs_free_space *next;
-	struct btrfs_free_space *last;
+	struct btrfs_free_space *last = NULL;
 	u64 min_bytes;
 	u64 window_start;
 	u64 window_free;
 	u64 max_extent = 0;
-	int total_retries = 0;
+	bool found_bitmap = false;
 	int ret;
 
 	/* for metadata, allow allocates with more holes */
@@ -620,31 +1150,80 @@ int btrfs_find_space_cluster(struct btrfs_trans_handle *trans,
 		goto out;
 	}
 again:
-	min_bytes = min(min_bytes, bytes + empty_size);
-	entry = tree_search_bytes(&block_group->free_space_bytes,
-				  offset, min_bytes);
+	entry = tree_search_offset(block_group, offset, found_bitmap, 1);
 	if (!entry) {
 		ret = -ENOSPC;
 		goto out;
 	}
+
+	/*
+	 * If found_bitmap is true, we exhausted our search for extent entries,
+	 * and we just want to search all of the bitmaps that we can find, and
+	 * ignore any extent entries we find.
+	 */
+	while (entry->bitmap || found_bitmap ||
+	       (!entry->bitmap && entry->bytes < min_bytes)) {
+		struct rb_node *node = rb_next(&entry->offset_index);
+
+		if (entry->bitmap && entry->bytes > bytes + empty_size) {
+			ret = btrfs_bitmap_cluster(block_group, entry, cluster,
+						   offset, bytes + empty_size,
+						   min_bytes);
+			if (!ret)
+				goto got_it;
+		}
+
+		if (!node) {
+			ret = -ENOSPC;
+			goto out;
+		}
+		entry = rb_entry(node, struct btrfs_free_space, offset_index);
+	}
+
+	/*
+	 * We already searched all the extent entries from the passed in offset
+	 * to the end and didn't find enough space for the cluster, and we also
+	 * didn't find any bitmaps that met our criteria, just go ahead and exit
+	 */
+	if (found_bitmap) {
+		ret = -ENOSPC;
+		goto out;
+	}
+
+	cluster->points_to_bitmap = false;
 	window_start = entry->offset;
 	window_free = entry->bytes;
 	last = entry;
 	max_extent = entry->bytes;
 
-	while(1) {
+	while (1) {
 		/* out window is just right, lets fill it */
 		if (window_free >= bytes + empty_size)
 			break;
 
 		node = rb_next(&last->offset_index);
 		if (!node) {
+			if (found_bitmap)
+				goto again;
 			ret = -ENOSPC;
 			goto out;
 		}
 		next = rb_entry(node, struct btrfs_free_space, offset_index);
 
 		/*
+		 * we found a bitmap, so if this search doesn't result in a
+		 * cluster, we know to go and search again for the bitmaps and
+		 * start looking for space there
+		 */
+		if (next->bitmap) {
+			if (!found_bitmap)
+				offset = next->offset;
+			found_bitmap = true;
+			last = next;
+			continue;
+		}
+
+		/*
 		 * we haven't filled the empty size and the window is
 		 * very large.  reset and try again
 		 */
@@ -655,19 +1234,6 @@ again:
 			window_free = entry->bytes;
 			last = entry;
 			max_extent = 0;
-			total_retries++;
-			if (total_retries % 64 == 0) {
-				if (min_bytes >= (bytes + empty_size)) {
-					ret = -ENOSPC;
-					goto out;
-				}
-				/*
-				 * grow our allocation a bit, we're not having
-				 * much luck
-				 */
-				min_bytes *= 2;
-				goto again;
-			}
 		} else {
 			last = next;
 			window_free += next->bytes;
@@ -685,11 +1251,19 @@ again:
 	 * The cluster includes an rbtree, but only uses the offset index
 	 * of each free space cache entry.
 	 */
-	while(1) {
+	while (1) {
 		node = rb_next(&entry->offset_index);
-		unlink_free_space(block_group, entry);
+		if (entry->bitmap && node) {
+			entry = rb_entry(node, struct btrfs_free_space,
+					 offset_index);
+			continue;
+		} else if (entry->bitmap && !node) {
+			break;
+		}
+
+		rb_erase(&entry->offset_index, &block_group->free_space_offset);
 		ret = tree_insert_offset(&cluster->root, entry->offset,
-					 &entry->offset_index);
+					 &entry->offset_index, 0);
 		BUG_ON(ret);
 
 		if (!node || entry == last)
@@ -697,8 +1271,10 @@ again:
 
 		entry = rb_entry(node, struct btrfs_free_space, offset_index);
 	}
-	ret = 0;
+
 	cluster->max_size = max_extent;
+got_it:
+	ret = 0;
 	atomic_inc(&block_group->count);
 	list_add_tail(&cluster->block_group_list, &block_group->cluster_list);
 	cluster->block_group = block_group;
@@ -718,6 +1294,7 @@ void btrfs_init_free_cluster(struct btrfs_free_cluster *cluster)
 	spin_lock_init(&cluster->refill_lock);
 	cluster->root.rb_node = NULL;
 	cluster->max_size = 0;
+	cluster->points_to_bitmap = false;
 	INIT_LIST_HEAD(&cluster->block_group_list);
 	cluster->block_group = NULL;
 }
diff --git a/fs/btrfs/free-space-cache.h b/fs/btrfs/free-space-cache.h
index 266fb87..890a8e7 100644
--- a/fs/btrfs/free-space-cache.h
+++ b/fs/btrfs/free-space-cache.h
@@ -19,6 +19,14 @@
 #ifndef __BTRFS_FREE_SPACE_CACHE
 #define __BTRFS_FREE_SPACE_CACHE
 
+struct btrfs_free_space {
+	struct rb_node offset_index;
+	u64 offset;
+	u64 bytes;
+	unsigned long *bitmap;
+	struct list_head list;
+};
+
 int btrfs_add_free_space(struct btrfs_block_group_cache *block_group,
 			 u64 bytenr, u64 size);
 int btrfs_remove_free_space(struct btrfs_block_group_cache *block_group,
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 791eab1..56fe83f 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -2603,8 +2603,8 @@ noinline int btrfs_truncate_inode_items(struct btrfs_trans_handle *trans,
 	if (root->ref_cows)
 		btrfs_drop_extent_cache(inode, new_size & (~mask), (u64)-1, 0);
 	path = btrfs_alloc_path();
-	path->reada = -1;
 	BUG_ON(!path);
+	path->reada = -1;
 
 	/* FIXME, add redo link to tree so we don't leak on crash */
 	key.objectid = inode->i_ino;
diff --git a/fs/btrfs/print-tree.c b/fs/btrfs/print-tree.c
index 6d6523d..0d126be 100644
--- a/fs/btrfs/print-tree.c
+++ b/fs/btrfs/print-tree.c
@@ -309,7 +309,7 @@ void btrfs_print_tree(struct btrfs_root *root, struct extent_buffer *c)
 	}
 	printk(KERN_INFO "node %llu level %d total ptrs %d free spc %u\n",
 	       (unsigned long long)btrfs_header_bytenr(c),
-	       btrfs_header_level(c), nr,
+	      level, nr,
 	       (u32)BTRFS_NODEPTRS_PER_BLOCK(root) - nr);
 	for (i = 0; i < nr; i++) {
 		btrfs_node_key_to_cpu(c, &key, i);
@@ -326,10 +326,10 @@ void btrfs_print_tree(struct btrfs_root *root, struct extent_buffer *c)
 					btrfs_level_size(root, level - 1),
 					btrfs_node_ptr_generation(c, i));
 		if (btrfs_is_leaf(next) &&
-		    btrfs_header_level(c) != 1)
+		   level != 1)
 			BUG();
 		if (btrfs_header_level(next) !=
-			btrfs_header_level(c) - 1)
+		       level - 1)
 			BUG();
 		btrfs_print_tree(root, next);
 		free_extent_buffer(next);
diff --git a/fs/btrfs/relocation.c b/fs/btrfs/relocation.c
index 0083979..e71264d 100644
--- a/fs/btrfs/relocation.c
+++ b/fs/btrfs/relocation.c
@@ -670,6 +670,8 @@ again:
 			err = ret;
 			goto out;
 		}
+		if (ret > 0 && path2->slots[level] > 0)
+			path2->slots[level]--;
 
 		eb = path2->nodes[level];
 		WARN_ON(btrfs_node_blockptr(eb, path2->slots[level]) !=
@@ -1609,6 +1611,7 @@ static noinline_for_stack int merge_reloc_root(struct reloc_control *rc,
 		BUG_ON(level == 0);
 		path->lowest_level = level;
 		ret = btrfs_search_slot(NULL, reloc_root, &key, path, 0, 0);
+		path->lowest_level = 0;
 		if (ret < 0) {
 			btrfs_free_path(path);
 			return ret;
diff --git a/fs/btrfs/transaction.c b/fs/btrfs/transaction.c
index 2dbf1c1..cdbb502 100644
--- a/fs/btrfs/transaction.c
+++ b/fs/btrfs/transaction.c
@@ -40,6 +40,12 @@ static noinline void put_transaction(struct btrfs_transaction *transaction)
 	}
 }
 
+static noinline void switch_commit_root(struct btrfs_root *root)
+{
+	free_extent_buffer(root->commit_root);
+	root->commit_root = btrfs_root_node(root);
+}
+
 /*
  * either allocate a new transaction or hop into the existing one
  */
@@ -444,9 +450,6 @@ static int update_cowonly_root(struct btrfs_trans_handle *trans,
 
 	btrfs_write_dirty_block_groups(trans, root);
 
-	ret = btrfs_run_delayed_refs(trans, root, (unsigned long)-1);
-	BUG_ON(ret);
-
 	while (1) {
 		old_root_bytenr = btrfs_root_bytenr(&root->root_item);
 		if (old_root_bytenr == root->node->start)
@@ -457,13 +460,14 @@ static int update_cowonly_root(struct btrfs_trans_handle *trans,
 					&root->root_key,
 					&root->root_item);
 		BUG_ON(ret);
-		btrfs_write_dirty_block_groups(trans, root);
 
-		ret = btrfs_run_delayed_refs(trans, root, (unsigned long)-1);
+		ret = btrfs_write_dirty_block_groups(trans, root);
 		BUG_ON(ret);
 	}
-	free_extent_buffer(root->commit_root);
-	root->commit_root = btrfs_root_node(root);
+
+	if (root != root->fs_info->extent_root)
+		switch_commit_root(root);
+
 	return 0;
 }
 
@@ -495,10 +499,12 @@ static noinline int commit_cowonly_roots(struct btrfs_trans_handle *trans,
 		root = list_entry(next, struct btrfs_root, dirty_list);
 
 		update_cowonly_root(trans, root);
-
-		ret = btrfs_run_delayed_refs(trans, root, (unsigned long)-1);
-		BUG_ON(ret);
 	}
+
+	down_write(&fs_info->extent_commit_sem);
+	switch_commit_root(fs_info->extent_root);
+	up_write(&fs_info->extent_commit_sem);
+
 	return 0;
 }
 
@@ -544,8 +550,7 @@ static noinline int commit_fs_roots(struct btrfs_trans_handle *trans,
 			btrfs_update_reloc_root(trans, root);
 
 			if (root->commit_root != root->node) {
-				free_extent_buffer(root->commit_root);
-				root->commit_root = btrfs_root_node(root);
+				switch_commit_root(root);
 				btrfs_set_root_node(&root->root_item,
 						    root->node);
 			}
@@ -852,6 +857,16 @@ static void update_super_roots(struct btrfs_root *root)
 	super->root_level = root_item->level;
 }
 
+int btrfs_transaction_in_commit(struct btrfs_fs_info *info)
+{
+	int ret = 0;
+	spin_lock(&info->new_trans_lock);
+	if (info->running_transaction)
+		ret = info->running_transaction->in_commit;
+	spin_unlock(&info->new_trans_lock);
+	return ret;
+}
+
 int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 			     struct btrfs_root *root)
 {
@@ -943,9 +958,11 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 
 		mutex_unlock(&root->fs_info->trans_mutex);
 
-		if (flush_on_commit || snap_pending) {
-			if (flush_on_commit)
-				btrfs_start_delalloc_inodes(root);
+		if (flush_on_commit) {
+			btrfs_start_delalloc_inodes(root);
+			ret = btrfs_wait_ordered_extents(root, 0);
+			BUG_ON(ret);
+		} else if (snap_pending) {
 			ret = btrfs_wait_ordered_extents(root, 1);
 			BUG_ON(ret);
 		}
@@ -1009,15 +1026,11 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 
 	btrfs_set_root_node(&root->fs_info->tree_root->root_item,
 			    root->fs_info->tree_root->node);
-	free_extent_buffer(root->fs_info->tree_root->commit_root);
-	root->fs_info->tree_root->commit_root =
-				btrfs_root_node(root->fs_info->tree_root);
+	switch_commit_root(root->fs_info->tree_root);
 
 	btrfs_set_root_node(&root->fs_info->chunk_root->root_item,
 			    root->fs_info->chunk_root->node);
-	free_extent_buffer(root->fs_info->chunk_root->commit_root);
-	root->fs_info->chunk_root->commit_root =
-				btrfs_root_node(root->fs_info->chunk_root);
+	switch_commit_root(root->fs_info->chunk_root);
 
 	update_super_roots(root);
 
@@ -1057,6 +1070,7 @@ int btrfs_commit_transaction(struct btrfs_trans_handle *trans,
 	cur_trans->commit_done = 1;
 
 	root->fs_info->last_trans_committed = cur_trans->transid;
+
 	wake_up(&cur_trans->commit_wait);
 
 	put_transaction(cur_trans);
diff --git a/fs/btrfs/transaction.h b/fs/btrfs/transaction.h
index 961c3ee..663c674 100644
--- a/fs/btrfs/transaction.h
+++ b/fs/btrfs/transaction.h
@@ -107,4 +107,5 @@ int btrfs_record_root_in_trans(struct btrfs_trans_handle *trans,
 				struct btrfs_root *root);
 int btrfs_write_and_wait_marked_extents(struct btrfs_root *root,
 					struct extent_io_tree *dirty_pages);
+int btrfs_transaction_in_commit(struct btrfs_fs_info *info);
 #endif
diff --git a/fs/btrfs/tree-log.c b/fs/btrfs/tree-log.c
index c139222..d91b0de 100644
--- a/fs/btrfs/tree-log.c
+++ b/fs/btrfs/tree-log.c
@@ -797,7 +797,7 @@ static noinline int add_inode_ref(struct btrfs_trans_handle *trans,
 		return -ENOENT;
 
 	inode = read_one_inode(root, key->objectid);
-	BUG_ON(!dir);
+	BUG_ON(!inode);
 
 	ref_ptr = btrfs_item_ptr_offset(eb, slot);
 	ref_end = ref_ptr + btrfs_item_size_nr(eb, slot);
diff --git a/fs/btrfs/volumes.c b/fs/btrfs/volumes.c
index 3ab80e9..5dbefd1 100644
--- a/fs/btrfs/volumes.c
+++ b/fs/btrfs/volumes.c
@@ -721,7 +721,8 @@ error:
  */
 static noinline int find_free_dev_extent(struct btrfs_trans_handle *trans,
 					 struct btrfs_device *device,
-					 u64 num_bytes, u64 *start)
+					 u64 num_bytes, u64 *start,
+					 u64 *max_avail)
 {
 	struct btrfs_key key;
 	struct btrfs_root *root = device->dev_root;
@@ -758,9 +759,13 @@ static noinline int find_free_dev_extent(struct btrfs_trans_handle *trans,
 	ret = btrfs_search_slot(trans, root, &key, path, 0, 0);
 	if (ret < 0)
 		goto error;
-	ret = btrfs_previous_item(root, path, 0, key.type);
-	if (ret < 0)
-		goto error;
+	if (ret > 0) {
+		ret = btrfs_previous_item(root, path, key.objectid, key.type);
+		if (ret < 0)
+			goto error;
+		if (ret > 0)
+			start_found = 1;
+	}
 	l = path->nodes[0];
 	btrfs_item_key_to_cpu(l, &key, path->slots[0]);
 	while (1) {
@@ -803,6 +808,10 @@ no_more_items:
 			if (last_byte < search_start)
 				last_byte = search_start;
 			hole_size = key.offset - last_byte;
+
+			if (hole_size > *max_avail)
+				*max_avail = hole_size;
+
 			if (key.offset > last_byte &&
 			    hole_size >= num_bytes) {
 				*start = last_byte;
@@ -1621,6 +1630,7 @@ static int __btrfs_grow_device(struct btrfs_trans_handle *trans,
 	device->fs_devices->total_rw_bytes += diff;
 
 	device->total_bytes = new_size;
+	device->disk_total_bytes = new_size;
 	btrfs_clear_space_info_full(device->dev_root->fs_info);
 
 	return btrfs_update_device(trans, device);
@@ -2007,7 +2017,7 @@ int btrfs_shrink_device(struct btrfs_device *device, u64 new_size)
 			goto done;
 		if (ret) {
 			ret = 0;
-			goto done;
+			break;
 		}
 
 		l = path->nodes[0];
@@ -2015,7 +2025,7 @@ int btrfs_shrink_device(struct btrfs_device *device, u64 new_size)
 		btrfs_item_key_to_cpu(l, &key, path->slots[0]);
 
 		if (key.objectid != device->devid)
-			goto done;
+			break;
 
 		dev_extent = btrfs_item_ptr(l, slot, struct btrfs_dev_extent);
 		length = btrfs_dev_extent_length(l, dev_extent);
@@ -2171,6 +2181,7 @@ static int __btrfs_alloc_chunk(struct btrfs_trans_handle *trans,
 			     max_chunk_size);
 
 again:
+	max_avail = 0;
 	if (!map || map->num_stripes != num_stripes) {
 		kfree(map);
 		map = kmalloc(map_lookup_size(num_stripes), GFP_NOFS);
@@ -2219,7 +2230,8 @@ again:
 
 		if (device->in_fs_metadata && avail >= min_free) {
 			ret = find_free_dev_extent(trans, device,
-						   min_free, &dev_offset);
+						   min_free, &dev_offset,
+						   &max_avail);
 			if (ret == 0) {
 				list_move_tail(&device->dev_alloc_list,
 					       &private_devs);
@@ -2795,26 +2807,6 @@ int btrfs_rmap_block(struct btrfs_mapping_tree *map_tree,
 		}
 	}
 
-	for (i = 0; i > nr; i++) {
-		struct btrfs_multi_bio *multi;
-		struct btrfs_bio_stripe *stripe;
-		int ret;
-
-		length = 1;
-		ret = btrfs_map_block(map_tree, WRITE, buf[i],
-				      &length, &multi, 0);
-		BUG_ON(ret);
-
-		stripe = multi->stripes;
-		for (j = 0; j < multi->num_stripes; j++) {
-			if (stripe->physical >= physical &&
-			    physical < stripe->physical + length)
-				break;
-		}
-		BUG_ON(j >= multi->num_stripes);
-		kfree(multi);
-	}
-
 	*logical = buf;
 	*naddrs = nr;
 	*stripe_len = map->stripe_len;
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index 9bb5c87..fc44d31 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -2452,10 +2452,10 @@ try_mount_again:
 		tcon->local_lease = volume_info->local_lease;
 	}
 	if (pSesInfo) {
-		if (pSesInfo->capabilities & CAP_LARGE_FILES) {
-			sb->s_maxbytes = (u64) 1 << 63;
-		} else
-			sb->s_maxbytes = (u64) 1 << 31;	/* 2 GB */
+		if (pSesInfo->capabilities & CAP_LARGE_FILES)
+			sb->s_maxbytes = MAX_LFS_FILESIZE;
+		else
+			sb->s_maxbytes = MAX_NON_LFS;
 	}
 
 	/* BB FIXME fix time_gran to be larger for LANMAN sessions */
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index 18afe57..82d8383 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -212,7 +212,7 @@ cifs_unix_basic_to_fattr(struct cifs_fattr *fattr, FILE_UNIX_BASIC_INFO *info,
  * junction to the new submount (ie to setup the fake directory
  * which represents a DFS referral).
  */
-void
+static void
 cifs_create_dfs_fattr(struct cifs_fattr *fattr, struct super_block *sb)
 {
 	struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
@@ -388,7 +388,7 @@ static int cifs_sfu_mode(struct cifs_fattr *fattr, const unsigned char *path,
 }
 
 /* Fill a cifs_fattr struct with info from FILE_ALL_INFO */
-void
+static void
 cifs_all_info_to_fattr(struct cifs_fattr *fattr, FILE_ALL_INFO *info,
 		       struct cifs_sb_info *cifs_sb, bool adjust_tz)
 {
@@ -513,9 +513,12 @@ int cifs_get_inode_info(struct inode **pinode,
 					cifs_sb->mnt_cifs_flags &
 						CIFS_MOUNT_MAP_SPECIAL_CHR);
 			if (rc1) {
-				/* BB EOPNOSUPP disable SERVER_INUM? */
 				cFYI(1, ("GetSrvInodeNum rc %d", rc1));
 				fattr.cf_uniqueid = iunique(sb, ROOT_I);
+				/* disable serverino if call not supported */
+				if (rc1 == -EINVAL)
+					cifs_sb->mnt_cifs_flags &=
+							~CIFS_MOUNT_SERVER_INUM;
 			}
 		} else {
 			fattr.cf_uniqueid = iunique(sb, ROOT_I);
diff --git a/fs/ecryptfs/keystore.c b/fs/ecryptfs/keystore.c
index af737bb..259525c 100644
--- a/fs/ecryptfs/keystore.c
+++ b/fs/ecryptfs/keystore.c
@@ -1303,6 +1303,13 @@ parse_tag_3_packet(struct ecryptfs_crypt_stat *crypt_stat,
 	}
 	(*new_auth_tok)->session_key.encrypted_key_size =
 		(body_size - (ECRYPTFS_SALT_SIZE + 5));
+	if ((*new_auth_tok)->session_key.encrypted_key_size
+	    > ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES) {
+		printk(KERN_WARNING "Tag 3 packet contains key larger "
+		       "than ECRYPTFS_MAX_ENCRYPTED_KEY_BYTES\n");
+		rc = -EINVAL;
+		goto out_free;
+	}
 	if (unlikely(data[(*packet_size)++] != 0x04)) {
 		printk(KERN_WARNING "Unknown version number [%d]\n",
 		       data[(*packet_size) - 1]);
@@ -1449,6 +1456,12 @@ parse_tag_11_packet(unsigned char *data, unsigned char *contents,
 		rc = -EINVAL;
 		goto out;
 	}
+	if (unlikely((*tag_11_contents_size) > max_contents_bytes)) {
+		printk(KERN_ERR "Literal data section in tag 11 packet exceeds "
+		       "expected size\n");
+		rc = -EINVAL;
+		goto out;
+	}
 	if (data[(*packet_size)++] != 0x62) {
 		printk(KERN_WARNING "Unrecognizable packet\n");
 		rc = -EINVAL;
diff --git a/fs/ext3/dir.c b/fs/ext3/dir.c
index 3d724a9..373fa90 100644
--- a/fs/ext3/dir.c
+++ b/fs/ext3/dir.c
@@ -130,8 +130,7 @@ static int ext3_readdir(struct file * filp,
 		struct buffer_head *bh = NULL;
 
 		map_bh.b_state = 0;
-		err = ext3_get_blocks_handle(NULL, inode, blk, 1,
-						&map_bh, 0, 0);
+		err = ext3_get_blocks_handle(NULL, inode, blk, 1, &map_bh, 0);
 		if (err > 0) {
 			pgoff_t index = map_bh.b_blocknr >>
 					(PAGE_CACHE_SHIFT - inode->i_blkbits);
diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c
index 5f51fed..b49908a 100644
--- a/fs/ext3/inode.c
+++ b/fs/ext3/inode.c
@@ -788,7 +788,7 @@ err_out:
 int ext3_get_blocks_handle(handle_t *handle, struct inode *inode,
 		sector_t iblock, unsigned long maxblocks,
 		struct buffer_head *bh_result,
-		int create, int extend_disksize)
+		int create)
 {
 	int err = -EIO;
 	int offsets[4];
@@ -911,13 +911,6 @@ int ext3_get_blocks_handle(handle_t *handle, struct inode *inode,
 	if (!err)
 		err = ext3_splice_branch(handle, inode, iblock,
 					partial, indirect_blks, count);
-	/*
-	 * i_disksize growing is protected by truncate_mutex.  Don't forget to
-	 * protect it if you're about to implement concurrent
-	 * ext3_get_block() -bzzz
-	*/
-	if (!err && extend_disksize && inode->i_size > ei->i_disksize)
-		ei->i_disksize = inode->i_size;
 	mutex_unlock(&ei->truncate_mutex);
 	if (err)
 		goto cleanup;
@@ -972,7 +965,7 @@ static int ext3_get_block(struct inode *inode, sector_t iblock,
 	}
 
 	ret = ext3_get_blocks_handle(handle, inode, iblock,
-					max_blocks, bh_result, create, 0);
+					max_blocks, bh_result, create);
 	if (ret > 0) {
 		bh_result->b_size = (ret << inode->i_blkbits);
 		ret = 0;
@@ -1005,7 +998,7 @@ struct buffer_head *ext3_getblk(handle_t *handle, struct inode *inode,
 	dummy.b_blocknr = -1000;
 	buffer_trace_init(&dummy.b_history);
 	err = ext3_get_blocks_handle(handle, inode, block, 1,
-					&dummy, create, 1);
+					&dummy, create);
 	/*
 	 * ext3_get_blocks_handle() returns number of blocks
 	 * mapped. 0 in case of a HOLE.
@@ -1193,15 +1186,16 @@ write_begin_failed:
 		 * i_size_read because we hold i_mutex.
 		 *
 		 * Add inode to orphan list in case we crash before truncate
-		 * finishes.
+		 * finishes. Do this only if ext3_can_truncate() agrees so
+		 * that orphan processing code is happy.
 		 */
-		if (pos + len > inode->i_size)
+		if (pos + len > inode->i_size && ext3_can_truncate(inode))
 			ext3_orphan_add(handle, inode);
 		ext3_journal_stop(handle);
 		unlock_page(page);
 		page_cache_release(page);
 		if (pos + len > inode->i_size)
-			vmtruncate(inode, inode->i_size);
+			ext3_truncate(inode);
 	}
 	if (ret == -ENOSPC && ext3_should_retry_alloc(inode->i_sb, &retries))
 		goto retry;
@@ -1287,7 +1281,7 @@ static int ext3_ordered_write_end(struct file *file,
 	 * There may be allocated blocks outside of i_size because
 	 * we failed to copy some data. Prepare for truncate.
 	 */
-	if (pos + len > inode->i_size)
+	if (pos + len > inode->i_size && ext3_can_truncate(inode))
 		ext3_orphan_add(handle, inode);
 	ret2 = ext3_journal_stop(handle);
 	if (!ret)
@@ -1296,7 +1290,7 @@ static int ext3_ordered_write_end(struct file *file,
 	page_cache_release(page);
 
 	if (pos + len > inode->i_size)
-		vmtruncate(inode, inode->i_size);
+		ext3_truncate(inode);
 	return ret ? ret : copied;
 }
 
@@ -1315,14 +1309,14 @@ static int ext3_writeback_write_end(struct file *file,
 	 * There may be allocated blocks outside of i_size because
 	 * we failed to copy some data. Prepare for truncate.
 	 */
-	if (pos + len > inode->i_size)
+	if (pos + len > inode->i_size && ext3_can_truncate(inode))
 		ext3_orphan_add(handle, inode);
 	ret = ext3_journal_stop(handle);
 	unlock_page(page);
 	page_cache_release(page);
 
 	if (pos + len > inode->i_size)
-		vmtruncate(inode, inode->i_size);
+		ext3_truncate(inode);
 	return ret ? ret : copied;
 }
 
@@ -1358,7 +1352,7 @@ static int ext3_journalled_write_end(struct file *file,
 	 * There may be allocated blocks outside of i_size because
 	 * we failed to copy some data. Prepare for truncate.
 	 */
-	if (pos + len > inode->i_size)
+	if (pos + len > inode->i_size && ext3_can_truncate(inode))
 		ext3_orphan_add(handle, inode);
 	EXT3_I(inode)->i_state |= EXT3_STATE_JDATA;
 	if (inode->i_size > EXT3_I(inode)->i_disksize) {
@@ -1375,7 +1369,7 @@ static int ext3_journalled_write_end(struct file *file,
 	page_cache_release(page);
 
 	if (pos + len > inode->i_size)
-		vmtruncate(inode, inode->i_size);
+		ext3_truncate(inode);
 	return ret ? ret : copied;
 }
 
diff --git a/fs/gfs2/aops.c b/fs/gfs2/aops.c
index 03ebb43..7ebae9a 100644
--- a/fs/gfs2/aops.c
+++ b/fs/gfs2/aops.c
@@ -624,6 +624,7 @@ static int gfs2_write_begin(struct file *file, struct address_space *mapping,
 {
 	struct gfs2_inode *ip = GFS2_I(mapping->host);
 	struct gfs2_sbd *sdp = GFS2_SB(mapping->host);
+	struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
 	unsigned int data_blocks = 0, ind_blocks = 0, rblocks;
 	int alloc_required;
 	int error = 0;
@@ -637,6 +638,14 @@ static int gfs2_write_begin(struct file *file, struct address_space *mapping,
 	error = gfs2_glock_nq(&ip->i_gh);
 	if (unlikely(error))
 		goto out_uninit;
+	if (&ip->i_inode == sdp->sd_rindex) {
+		error = gfs2_glock_nq_init(m_ip->i_gl, LM_ST_EXCLUSIVE,
+					   GL_NOCACHE, &m_ip->i_gh);
+		if (unlikely(error)) {
+			gfs2_glock_dq(&ip->i_gh);
+			goto out_uninit;
+		}
+	}
 
 	error = gfs2_write_alloc_required(ip, pos, len, &alloc_required);
 	if (error)
@@ -667,6 +676,8 @@ static int gfs2_write_begin(struct file *file, struct address_space *mapping,
 		rblocks += data_blocks ? data_blocks : 1;
 	if (ind_blocks || data_blocks)
 		rblocks += RES_STATFS + RES_QUOTA;
+	if (&ip->i_inode == sdp->sd_rindex)
+		rblocks += 2 * RES_STATFS;
 
 	error = gfs2_trans_begin(sdp, rblocks,
 				 PAGE_CACHE_SIZE/sdp->sd_sb.sb_bsize);
@@ -712,6 +723,10 @@ out_alloc_put:
 		gfs2_alloc_put(ip);
 	}
 out_unlock:
+	if (&ip->i_inode == sdp->sd_rindex) {
+		gfs2_glock_dq(&m_ip->i_gh);
+		gfs2_holder_uninit(&m_ip->i_gh);
+	}
 	gfs2_glock_dq(&ip->i_gh);
 out_uninit:
 	gfs2_holder_uninit(&ip->i_gh);
@@ -725,14 +740,21 @@ out_uninit:
 static void adjust_fs_space(struct inode *inode)
 {
 	struct gfs2_sbd *sdp = inode->i_sb->s_fs_info;
+	struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
+	struct gfs2_inode *l_ip = GFS2_I(sdp->sd_sc_inode);
 	struct gfs2_statfs_change_host *m_sc = &sdp->sd_statfs_master;
 	struct gfs2_statfs_change_host *l_sc = &sdp->sd_statfs_local;
+	struct buffer_head *m_bh, *l_bh;
 	u64 fs_total, new_free;
 
 	/* Total up the file system space, according to the latest rindex. */
 	fs_total = gfs2_ri_total(sdp);
+	if (gfs2_meta_inode_buffer(m_ip, &m_bh) != 0)
+		return;
 
 	spin_lock(&sdp->sd_statfs_spin);
+	gfs2_statfs_change_in(m_sc, m_bh->b_data +
+			      sizeof(struct gfs2_dinode));
 	if (fs_total > (m_sc->sc_total + l_sc->sc_total))
 		new_free = fs_total - (m_sc->sc_total + l_sc->sc_total);
 	else
@@ -741,6 +763,13 @@ static void adjust_fs_space(struct inode *inode)
 	fs_warn(sdp, "File system extended by %llu blocks.\n",
 		(unsigned long long)new_free);
 	gfs2_statfs_change(sdp, new_free, new_free, 0);
+
+	if (gfs2_meta_inode_buffer(l_ip, &l_bh) != 0)
+		goto out;
+	update_statfs(sdp, m_bh, l_bh);
+	brelse(l_bh);
+out:
+	brelse(m_bh);
 }
 
 /**
@@ -763,6 +792,7 @@ static int gfs2_stuffed_write_end(struct inode *inode, struct buffer_head *dibh,
 {
 	struct gfs2_inode *ip = GFS2_I(inode);
 	struct gfs2_sbd *sdp = GFS2_SB(inode);
+	struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
 	u64 to = pos + copied;
 	void *kaddr;
 	unsigned char *buf = dibh->b_data + sizeof(struct gfs2_dinode);
@@ -794,6 +824,10 @@ static int gfs2_stuffed_write_end(struct inode *inode, struct buffer_head *dibh,
 
 	brelse(dibh);
 	gfs2_trans_end(sdp);
+	if (inode == sdp->sd_rindex) {
+		gfs2_glock_dq(&m_ip->i_gh);
+		gfs2_holder_uninit(&m_ip->i_gh);
+	}
 	gfs2_glock_dq(&ip->i_gh);
 	gfs2_holder_uninit(&ip->i_gh);
 	return copied;
@@ -823,6 +857,7 @@ static int gfs2_write_end(struct file *file, struct address_space *mapping,
 	struct inode *inode = page->mapping->host;
 	struct gfs2_inode *ip = GFS2_I(inode);
 	struct gfs2_sbd *sdp = GFS2_SB(inode);
+	struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
 	struct buffer_head *dibh;
 	struct gfs2_alloc *al = ip->i_alloc;
 	unsigned int from = pos & (PAGE_CACHE_SIZE - 1);
@@ -865,6 +900,10 @@ failed:
 		gfs2_quota_unlock(ip);
 		gfs2_alloc_put(ip);
 	}
+	if (inode == sdp->sd_rindex) {
+		gfs2_glock_dq(&m_ip->i_gh);
+		gfs2_holder_uninit(&m_ip->i_gh);
+	}
 	gfs2_glock_dq(&ip->i_gh);
 	gfs2_holder_uninit(&ip->i_gh);
 	return ret;
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index 297421c..8b674b1 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -63,6 +63,7 @@ static void do_xmote(struct gfs2_glock *gl, struct gfs2_holder *gh, unsigned int
 static DECLARE_RWSEM(gfs2_umount_flush_sem);
 static struct dentry *gfs2_root;
 static struct workqueue_struct *glock_workqueue;
+struct workqueue_struct *gfs2_delete_workqueue;
 static LIST_HEAD(lru_list);
 static atomic_t lru_count = ATOMIC_INIT(0);
 static DEFINE_SPINLOCK(lru_lock);
@@ -167,13 +168,33 @@ static void glock_free(struct gfs2_glock *gl)
  *
  */
 
-static void gfs2_glock_hold(struct gfs2_glock *gl)
+void gfs2_glock_hold(struct gfs2_glock *gl)
 {
 	GLOCK_BUG_ON(gl, atomic_read(&gl->gl_ref) == 0);
 	atomic_inc(&gl->gl_ref);
 }
 
 /**
+ * demote_ok - Check to see if it's ok to unlock a glock
+ * @gl: the glock
+ *
+ * Returns: 1 if it's ok
+ */
+
+static int demote_ok(const struct gfs2_glock *gl)
+{
+	const struct gfs2_glock_operations *glops = gl->gl_ops;
+
+	if (gl->gl_state == LM_ST_UNLOCKED)
+		return 0;
+	if (!list_empty(&gl->gl_holders))
+		return 0;
+	if (glops->go_demote_ok)
+		return glops->go_demote_ok(gl);
+	return 1;
+}
+
+/**
  * gfs2_glock_schedule_for_reclaim - Add a glock to the reclaim list
  * @gl: the glock
  *
@@ -181,8 +202,13 @@ static void gfs2_glock_hold(struct gfs2_glock *gl)
 
 static void gfs2_glock_schedule_for_reclaim(struct gfs2_glock *gl)
 {
+	int may_reclaim;
+	may_reclaim = (demote_ok(gl) &&
+		       (atomic_read(&gl->gl_ref) == 1 ||
+			(gl->gl_name.ln_type == LM_TYPE_INODE &&
+			 atomic_read(&gl->gl_ref) <= 2)));
 	spin_lock(&lru_lock);
-	if (list_empty(&gl->gl_lru) && gl->gl_state != LM_ST_UNLOCKED) {
+	if (list_empty(&gl->gl_lru) && may_reclaim) {
 		list_add_tail(&gl->gl_lru, &lru_list);
 		atomic_inc(&lru_count);
 	}
@@ -190,6 +216,21 @@ static void gfs2_glock_schedule_for_reclaim(struct gfs2_glock *gl)
 }
 
 /**
+ * gfs2_glock_put_nolock() - Decrement reference count on glock
+ * @gl: The glock to put
+ *
+ * This function should only be used if the caller has its own reference
+ * to the glock, in addition to the one it is dropping.
+ */
+
+void gfs2_glock_put_nolock(struct gfs2_glock *gl)
+{
+	if (atomic_dec_and_test(&gl->gl_ref))
+		GLOCK_BUG_ON(gl, 1);
+	gfs2_glock_schedule_for_reclaim(gl);
+}
+
+/**
  * gfs2_glock_put() - Decrement reference count on glock
  * @gl: The glock to put
  *
@@ -214,9 +255,9 @@ int gfs2_glock_put(struct gfs2_glock *gl)
 		rv = 1;
 		goto out;
 	}
-	/* 1 for being hashed, 1 for having state != LM_ST_UNLOCKED */
-	if (atomic_read(&gl->gl_ref) == 2)
-		gfs2_glock_schedule_for_reclaim(gl);
+	spin_lock(&gl->gl_spin);
+	gfs2_glock_schedule_for_reclaim(gl);
+	spin_unlock(&gl->gl_spin);
 	write_unlock(gl_lock_addr(gl->gl_hash));
 out:
 	return rv;
@@ -398,7 +439,7 @@ static void state_change(struct gfs2_glock *gl, unsigned int new_state)
 		if (held2)
 			gfs2_glock_hold(gl);
 		else
-			gfs2_glock_put(gl);
+			gfs2_glock_put_nolock(gl);
 	}
 
 	gl->gl_state = new_state;
@@ -633,12 +674,35 @@ out:
 out_sched:
 	gfs2_glock_hold(gl);
 	if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
-		gfs2_glock_put(gl);
+		gfs2_glock_put_nolock(gl);
 out_unlock:
 	clear_bit(GLF_LOCK, &gl->gl_flags);
 	goto out;
 }
 
+static void delete_work_func(struct work_struct *work)
+{
+	struct gfs2_glock *gl = container_of(work, struct gfs2_glock, gl_delete);
+	struct gfs2_sbd *sdp = gl->gl_sbd;
+	struct gfs2_inode *ip = NULL;
+	struct inode *inode;
+	u64 no_addr = 0;
+
+	spin_lock(&gl->gl_spin);
+	ip = (struct gfs2_inode *)gl->gl_object;
+	if (ip)
+		no_addr = ip->i_no_addr;
+	spin_unlock(&gl->gl_spin);
+	if (ip) {
+		inode = gfs2_ilookup(sdp->sd_vfs, no_addr);
+		if (inode) {
+			d_prune_aliases(inode);
+			iput(inode);
+		}
+	}
+	gfs2_glock_put(gl);
+}
+
 static void glock_work_func(struct work_struct *work)
 {
 	unsigned long delay = 0;
@@ -717,6 +781,7 @@ int gfs2_glock_get(struct gfs2_sbd *sdp, u64 number,
 	gl->gl_sbd = sdp;
 	gl->gl_aspace = NULL;
 	INIT_DELAYED_WORK(&gl->gl_work, glock_work_func);
+	INIT_WORK(&gl->gl_delete, delete_work_func);
 
 	/* If this glock protects actual on-disk data or metadata blocks,
 	   create a VFS inode to manage the pages/buffers holding them. */
@@ -858,6 +923,8 @@ static void handle_callback(struct gfs2_glock *gl, unsigned int state,
 			gl->gl_demote_state != state) {
 		gl->gl_demote_state = LM_ST_UNLOCKED;
 	}
+	if (gl->gl_ops->go_callback)
+		gl->gl_ops->go_callback(gl);
 	trace_gfs2_demote_rq(gl);
 }
 
@@ -1274,33 +1341,12 @@ void gfs2_glock_complete(struct gfs2_glock *gl, int ret)
 		gfs2_glock_put(gl);
 }
 
-/**
- * demote_ok - Check to see if it's ok to unlock a glock
- * @gl: the glock
- *
- * Returns: 1 if it's ok
- */
-
-static int demote_ok(const struct gfs2_glock *gl)
-{
-	const struct gfs2_glock_operations *glops = gl->gl_ops;
-
-	if (gl->gl_state == LM_ST_UNLOCKED)
-		return 0;
-	if (!list_empty(&gl->gl_holders))
-		return 0;
-	if (glops->go_demote_ok)
-		return glops->go_demote_ok(gl);
-	return 1;
-}
-
 
 static int gfs2_shrink_glock_memory(int nr, gfp_t gfp_mask)
 {
 	struct gfs2_glock *gl;
 	int may_demote;
 	int nr_skipped = 0;
-	int got_ref = 0;
 	LIST_HEAD(skipped);
 
 	if (nr == 0)
@@ -1315,37 +1361,29 @@ static int gfs2_shrink_glock_memory(int nr, gfp_t gfp_mask)
 		list_del_init(&gl->gl_lru);
 		atomic_dec(&lru_count);
 
+		/* Check if glock is about to be freed */
+		if (atomic_read(&gl->gl_ref) == 0)
+			continue;
+
 		/* Test for being demotable */
 		if (!test_and_set_bit(GLF_LOCK, &gl->gl_flags)) {
 			gfs2_glock_hold(gl);
-			got_ref = 1;
 			spin_unlock(&lru_lock);
 			spin_lock(&gl->gl_spin);
 			may_demote = demote_ok(gl);
-			spin_unlock(&gl->gl_spin);
-			clear_bit(GLF_LOCK, &gl->gl_flags);
 			if (may_demote) {
 				handle_callback(gl, LM_ST_UNLOCKED, 0);
 				nr--;
-				if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
-					gfs2_glock_put(gl);
-				got_ref = 0;
 			}
+			if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
+				gfs2_glock_put_nolock(gl);
+			spin_unlock(&gl->gl_spin);
+			clear_bit(GLF_LOCK, &gl->gl_flags);
 			spin_lock(&lru_lock);
-			if (may_demote)
-				continue;
-		}
-		if (list_empty(&gl->gl_lru) &&
-		    (atomic_read(&gl->gl_ref) <= (2 + got_ref))) {
-			nr_skipped++;
-			list_add(&gl->gl_lru, &skipped);
-		}
-		if (got_ref) {
-			spin_unlock(&lru_lock);
-			gfs2_glock_put(gl);
-			spin_lock(&lru_lock);
-			got_ref = 0;
+			continue;
 		}
+		nr_skipped++;
+		list_add(&gl->gl_lru, &skipped);
 	}
 	list_splice(&skipped, &lru_list);
 	atomic_add(nr_skipped, &lru_count);
@@ -1727,6 +1765,11 @@ int __init gfs2_glock_init(void)
 	glock_workqueue = create_workqueue("glock_workqueue");
 	if (IS_ERR(glock_workqueue))
 		return PTR_ERR(glock_workqueue);
+	gfs2_delete_workqueue = create_workqueue("delete_workqueue");
+	if (IS_ERR(gfs2_delete_workqueue)) {
+		destroy_workqueue(glock_workqueue);
+		return PTR_ERR(gfs2_delete_workqueue);
+	}
 
 	register_shrinker(&glock_shrinker);
 
@@ -1737,6 +1780,7 @@ void gfs2_glock_exit(void)
 {
 	unregister_shrinker(&glock_shrinker);
 	destroy_workqueue(glock_workqueue);
+	destroy_workqueue(gfs2_delete_workqueue);
 }
 
 static int gfs2_glock_iter_next(struct gfs2_glock_iter *gi)
diff --git a/fs/gfs2/glock.h b/fs/gfs2/glock.h
index a602a28..c609894 100644
--- a/fs/gfs2/glock.h
+++ b/fs/gfs2/glock.h
@@ -143,6 +143,7 @@ struct lm_lockops {
 
 #define GLR_TRYFAILED		13
 
+extern struct workqueue_struct *gfs2_delete_workqueue;
 static inline struct gfs2_holder *gfs2_glock_is_locked_by_me(struct gfs2_glock *gl)
 {
 	struct gfs2_holder *gh;
@@ -191,6 +192,8 @@ static inline int gfs2_glock_is_blocking(struct gfs2_glock *gl)
 int gfs2_glock_get(struct gfs2_sbd *sdp,
 		   u64 number, const struct gfs2_glock_operations *glops,
 		   int create, struct gfs2_glock **glp);
+void gfs2_glock_hold(struct gfs2_glock *gl);
+void gfs2_glock_put_nolock(struct gfs2_glock *gl);
 int gfs2_glock_put(struct gfs2_glock *gl);
 void gfs2_holder_init(struct gfs2_glock *gl, unsigned int state, unsigned flags,
 		      struct gfs2_holder *gh);
diff --git a/fs/gfs2/glops.c b/fs/gfs2/glops.c
index d5e4ab1..6985eef 100644
--- a/fs/gfs2/glops.c
+++ b/fs/gfs2/glops.c
@@ -323,6 +323,7 @@ static void trans_go_sync(struct gfs2_glock *gl)
 
 	if (gl->gl_state != LM_ST_UNLOCKED &&
 	    test_bit(SDF_JOURNAL_LIVE, &sdp->sd_flags)) {
+		flush_workqueue(gfs2_delete_workqueue);
 		gfs2_meta_syncfs(sdp);
 		gfs2_log_shutdown(sdp);
 	}
@@ -372,6 +373,25 @@ static int trans_go_demote_ok(const struct gfs2_glock *gl)
 	return 0;
 }
 
+/**
+ * iopen_go_callback - schedule the dcache entry for the inode to be deleted
+ * @gl: the glock
+ *
+ * gl_spin lock is held while calling this
+ */
+static void iopen_go_callback(struct gfs2_glock *gl)
+{
+	struct gfs2_inode *ip = (struct gfs2_inode *)gl->gl_object;
+
+	if (gl->gl_demote_state == LM_ST_UNLOCKED &&
+	    gl->gl_state == LM_ST_SHARED &&
+	    ip && test_bit(GIF_USER, &ip->i_flags)) {
+		gfs2_glock_hold(gl);
+		if (queue_work(gfs2_delete_workqueue, &gl->gl_delete) == 0)
+			gfs2_glock_put_nolock(gl);
+	}
+}
+
 const struct gfs2_glock_operations gfs2_meta_glops = {
 	.go_type = LM_TYPE_META,
 };
@@ -406,6 +426,7 @@ const struct gfs2_glock_operations gfs2_trans_glops = {
 
 const struct gfs2_glock_operations gfs2_iopen_glops = {
 	.go_type = LM_TYPE_IOPEN,
+	.go_callback = iopen_go_callback,
 };
 
 const struct gfs2_glock_operations gfs2_flock_glops = {
diff --git a/fs/gfs2/incore.h b/fs/gfs2/incore.h
index 225347f..61801ad 100644
--- a/fs/gfs2/incore.h
+++ b/fs/gfs2/incore.h
@@ -159,6 +159,7 @@ struct gfs2_glock_operations {
 	int (*go_lock) (struct gfs2_holder *gh);
 	void (*go_unlock) (struct gfs2_holder *gh);
 	int (*go_dump)(struct seq_file *seq, const struct gfs2_glock *gl);
+	void (*go_callback) (struct gfs2_glock *gl);
 	const int go_type;
 	const unsigned long go_min_hold_time;
 };
@@ -228,6 +229,7 @@ struct gfs2_glock {
 	struct list_head gl_ail_list;
 	atomic_t gl_ail_count;
 	struct delayed_work gl_work;
+	struct work_struct gl_delete;
 };
 
 #define GFS2_MIN_LVB_SIZE 32	/* Min size of LVB that gfs2 supports */
diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c
index daa4ae3..fba7957 100644
--- a/fs/gfs2/rgrp.c
+++ b/fs/gfs2/rgrp.c
@@ -285,27 +285,19 @@ void gfs2_rgrp_verify(struct gfs2_rgrpd *rgd)
 	}
 
 	tmp = rgd->rd_data - rgd->rd_free - rgd->rd_dinodes;
-	if (count[1] + count[2] != tmp) {
+	if (count[1] != tmp) {
 		if (gfs2_consist_rgrpd(rgd))
 			fs_err(sdp, "used data mismatch:  %u != %u\n",
 			       count[1], tmp);
 		return;
 	}
 
-	if (count[3] != rgd->rd_dinodes) {
+	if (count[2] + count[3] != rgd->rd_dinodes) {
 		if (gfs2_consist_rgrpd(rgd))
 			fs_err(sdp, "used metadata mismatch:  %u != %u\n",
-			       count[3], rgd->rd_dinodes);
+			       count[2] + count[3], rgd->rd_dinodes);
 		return;
 	}
-
-	if (count[2] > count[3]) {
-		if (gfs2_consist_rgrpd(rgd))
-			fs_err(sdp, "unlinked inodes > inodes:  %u\n",
-			       count[2]);
-		return;
-	}
-
 }
 
 static inline int rgrp_contains_block(struct gfs2_rgrpd *rgd, u64 block)
@@ -961,7 +953,8 @@ static int try_rgrp_fit(struct gfs2_rgrpd *rgd, struct gfs2_alloc *al)
  * Returns: The inode, if one has been found
  */
 
-static struct inode *try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked)
+static struct inode *try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked,
+				     u64 skip)
 {
 	struct inode *inode;
 	u32 goal = 0, block;
@@ -985,6 +978,8 @@ static struct inode *try_rgrp_unlink(struct gfs2_rgrpd *rgd, u64 *last_unlinked)
 		goal++;
 		if (*last_unlinked != NO_BLOCK && no_addr <= *last_unlinked)
 			continue;
+		if (no_addr == skip)
+			continue;
 		*last_unlinked = no_addr;
 		inode = gfs2_inode_lookup(rgd->rd_sbd->sd_vfs, DT_UNKNOWN,
 					  no_addr, -1, 1);
@@ -1104,7 +1099,7 @@ static struct inode *get_local_rgrp(struct gfs2_inode *ip, u64 *last_unlinked)
 			if (try_rgrp_fit(rgd, al))
 				goto out;
 			if (rgd->rd_flags & GFS2_RDF_CHECK)
-				inode = try_rgrp_unlink(rgd, last_unlinked);
+				inode = try_rgrp_unlink(rgd, last_unlinked, ip->i_no_addr);
 			if (!rg_locked)
 				gfs2_glock_dq_uninit(&al->al_rgd_gh);
 			if (inode)
@@ -1138,7 +1133,7 @@ static struct inode *get_local_rgrp(struct gfs2_inode *ip, u64 *last_unlinked)
 			if (try_rgrp_fit(rgd, al))
 				goto out;
 			if (rgd->rd_flags & GFS2_RDF_CHECK)
-				inode = try_rgrp_unlink(rgd, last_unlinked);
+				inode = try_rgrp_unlink(rgd, last_unlinked, ip->i_no_addr);
 			if (!rg_locked)
 				gfs2_glock_dq_uninit(&al->al_rgd_gh);
 			if (inode)
diff --git a/fs/gfs2/super.c b/fs/gfs2/super.c
index 0a68013..f522bb0 100644
--- a/fs/gfs2/super.c
+++ b/fs/gfs2/super.c
@@ -353,7 +353,7 @@ fail:
 	return error;
 }
 
-static void gfs2_statfs_change_in(struct gfs2_statfs_change_host *sc, const void *buf)
+void gfs2_statfs_change_in(struct gfs2_statfs_change_host *sc, const void *buf)
 {
 	const struct gfs2_statfs_change *str = buf;
 
@@ -441,6 +441,29 @@ void gfs2_statfs_change(struct gfs2_sbd *sdp, s64 total, s64 free,
 	brelse(l_bh);
 }
 
+void update_statfs(struct gfs2_sbd *sdp, struct buffer_head *m_bh,
+		   struct buffer_head *l_bh)
+{
+	struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
+	struct gfs2_inode *l_ip = GFS2_I(sdp->sd_sc_inode);
+	struct gfs2_statfs_change_host *m_sc = &sdp->sd_statfs_master;
+	struct gfs2_statfs_change_host *l_sc = &sdp->sd_statfs_local;
+
+	gfs2_trans_add_bh(l_ip->i_gl, l_bh, 1);
+
+	spin_lock(&sdp->sd_statfs_spin);
+	m_sc->sc_total += l_sc->sc_total;
+	m_sc->sc_free += l_sc->sc_free;
+	m_sc->sc_dinodes += l_sc->sc_dinodes;
+	memset(l_sc, 0, sizeof(struct gfs2_statfs_change));
+	memset(l_bh->b_data + sizeof(struct gfs2_dinode),
+	       0, sizeof(struct gfs2_statfs_change));
+	spin_unlock(&sdp->sd_statfs_spin);
+
+	gfs2_trans_add_bh(m_ip->i_gl, m_bh, 1);
+	gfs2_statfs_change_out(m_sc, m_bh->b_data + sizeof(struct gfs2_dinode));
+}
+
 int gfs2_statfs_sync(struct gfs2_sbd *sdp)
 {
 	struct gfs2_inode *m_ip = GFS2_I(sdp->sd_statfs_inode);
@@ -477,19 +500,7 @@ int gfs2_statfs_sync(struct gfs2_sbd *sdp)
 	if (error)
 		goto out_bh2;
 
-	gfs2_trans_add_bh(l_ip->i_gl, l_bh, 1);
-
-	spin_lock(&sdp->sd_statfs_spin);
-	m_sc->sc_total += l_sc->sc_total;
-	m_sc->sc_free += l_sc->sc_free;
-	m_sc->sc_dinodes += l_sc->sc_dinodes;
-	memset(l_sc, 0, sizeof(struct gfs2_statfs_change));
-	memset(l_bh->b_data + sizeof(struct gfs2_dinode),
-	       0, sizeof(struct gfs2_statfs_change));
-	spin_unlock(&sdp->sd_statfs_spin);
-
-	gfs2_trans_add_bh(m_ip->i_gl, m_bh, 1);
-	gfs2_statfs_change_out(m_sc, m_bh->b_data + sizeof(struct gfs2_dinode));
+	update_statfs(sdp, m_bh, l_bh);
 
 	gfs2_trans_end(sdp);
 
@@ -680,6 +691,7 @@ static int gfs2_make_fs_ro(struct gfs2_sbd *sdp)
 	struct gfs2_holder t_gh;
 	int error;
 
+	flush_workqueue(gfs2_delete_workqueue);
 	gfs2_quota_sync(sdp);
 	gfs2_statfs_sync(sdp);
 
diff --git a/fs/gfs2/super.h b/fs/gfs2/super.h
index b56413e..22e0417 100644
--- a/fs/gfs2/super.h
+++ b/fs/gfs2/super.h
@@ -40,6 +40,10 @@ extern int gfs2_make_fs_rw(struct gfs2_sbd *sdp);
 extern int gfs2_statfs_init(struct gfs2_sbd *sdp);
 extern void gfs2_statfs_change(struct gfs2_sbd *sdp, s64 total, s64 free,
 			       s64 dinodes);
+extern void gfs2_statfs_change_in(struct gfs2_statfs_change_host *sc,
+				  const void *buf);
+extern void update_statfs(struct gfs2_sbd *sdp, struct buffer_head *m_bh,
+			  struct buffer_head *l_bh);
 extern int gfs2_statfs_sync(struct gfs2_sbd *sdp);
 
 extern int gfs2_freeze_fs(struct gfs2_sbd *sdp);
diff --git a/fs/jbd/journal.c b/fs/jbd/journal.c
index 737f724..f96f850 100644
--- a/fs/jbd/journal.c
+++ b/fs/jbd/journal.c
@@ -287,6 +287,7 @@ int journal_write_metadata_buffer(transaction_t *transaction,
 	struct page *new_page;
 	unsigned int new_offset;
 	struct buffer_head *bh_in = jh2bh(jh_in);
+	journal_t *journal = transaction->t_journal;
 
 	/*
 	 * The buffer really shouldn't be locked: only the current committing
@@ -300,6 +301,11 @@ int journal_write_metadata_buffer(transaction_t *transaction,
 	J_ASSERT_BH(bh_in, buffer_jbddirty(bh_in));
 
 	new_bh = alloc_buffer_head(GFP_NOFS|__GFP_NOFAIL);
+	/* keep subsequent assertions sane */
+	new_bh->b_state = 0;
+	init_buffer(new_bh, NULL, NULL);
+	atomic_set(&new_bh->b_count, 1);
+	new_jh = journal_add_journal_head(new_bh);	/* This sleeps */
 
 	/*
 	 * If a new transaction has already done a buffer copy-out, then
@@ -361,14 +367,6 @@ repeat:
 		kunmap_atomic(mapped_data, KM_USER0);
 	}
 
-	/* keep subsequent assertions sane */
-	new_bh->b_state = 0;
-	init_buffer(new_bh, NULL, NULL);
-	atomic_set(&new_bh->b_count, 1);
-	jbd_unlock_bh_state(bh_in);
-
-	new_jh = journal_add_journal_head(new_bh);	/* This sleeps */
-
 	set_bh_page(new_bh, new_page, new_offset);
 	new_jh->b_transaction = NULL;
 	new_bh->b_size = jh2bh(jh_in)->b_size;
@@ -385,7 +383,11 @@ repeat:
 	 * copying is moved to the transaction's shadow queue.
 	 */
 	JBUFFER_TRACE(jh_in, "file as BJ_Shadow");
-	journal_file_buffer(jh_in, transaction, BJ_Shadow);
+	spin_lock(&journal->j_list_lock);
+	__journal_file_buffer(jh_in, transaction, BJ_Shadow);
+	spin_unlock(&journal->j_list_lock);
+	jbd_unlock_bh_state(bh_in);
+
 	JBUFFER_TRACE(new_jh, "file as BJ_IO");
 	journal_file_buffer(new_jh, transaction, BJ_IO);
 
@@ -848,6 +850,12 @@ static int journal_reset(journal_t *journal)
 
 	first = be32_to_cpu(sb->s_first);
 	last = be32_to_cpu(sb->s_maxlen);
+	if (first + JFS_MIN_JOURNAL_BLOCKS > last + 1) {
+		printk(KERN_ERR "JBD: Journal too short (blocks %lu-%lu).\n",
+		       first, last);
+		journal_fail_superblock(journal);
+		return -EINVAL;
+	}
 
 	journal->j_first = first;
 	journal->j_last = last;
diff --git a/fs/jbd/transaction.c b/fs/jbd/transaction.c
index 73242ba..c03ac11 100644
--- a/fs/jbd/transaction.c
+++ b/fs/jbd/transaction.c
@@ -489,34 +489,15 @@ void journal_unlock_updates (journal_t *journal)
 	wake_up(&journal->j_wait_transaction_locked);
 }
 
-/*
- * Report any unexpected dirty buffers which turn up.  Normally those
- * indicate an error, but they can occur if the user is running (say)
- * tune2fs to modify the live filesystem, so we need the option of
- * continuing as gracefully as possible.  #
- *
- * The caller should already hold the journal lock and
- * j_list_lock spinlock: most callers will need those anyway
- * in order to probe the buffer's journaling state safely.
- */
-static void jbd_unexpected_dirty_buffer(struct journal_head *jh)
+static void warn_dirty_buffer(struct buffer_head *bh)
 {
-	int jlist;
-
-	/* If this buffer is one which might reasonably be dirty
-	 * --- ie. data, or not part of this journal --- then
-	 * we're OK to leave it alone, but otherwise we need to
-	 * move the dirty bit to the journal's own internal
-	 * JBDDirty bit. */
-	jlist = jh->b_jlist;
+	char b[BDEVNAME_SIZE];
 
-	if (jlist == BJ_Metadata || jlist == BJ_Reserved ||
-	    jlist == BJ_Shadow || jlist == BJ_Forget) {
-		struct buffer_head *bh = jh2bh(jh);
-
-		if (test_clear_buffer_dirty(bh))
-			set_buffer_jbddirty(bh);
-	}
+	printk(KERN_WARNING
+	       "JBD: Spotted dirty metadata buffer (dev = %s, blocknr = %llu). "
+	       "There's a risk of filesystem corruption in case of system "
+	       "crash.\n",
+	       bdevname(bh->b_bdev, b), (unsigned long long)bh->b_blocknr);
 }
 
 /*
@@ -583,14 +564,16 @@ repeat:
 			if (jh->b_next_transaction)
 				J_ASSERT_JH(jh, jh->b_next_transaction ==
 							transaction);
+			warn_dirty_buffer(bh);
 		}
 		/*
 		 * In any case we need to clean the dirty flag and we must
 		 * do it under the buffer lock to be sure we don't race
 		 * with running write-out.
 		 */
-		JBUFFER_TRACE(jh, "Unexpected dirty buffer");
-		jbd_unexpected_dirty_buffer(jh);
+		JBUFFER_TRACE(jh, "Journalling dirty buffer");
+		clear_buffer_dirty(bh);
+		set_buffer_jbddirty(bh);
 	}
 
 	unlock_buffer(bh);
@@ -826,6 +809,15 @@ int journal_get_create_access(handle_t *handle, struct buffer_head *bh)
 	J_ASSERT_JH(jh, buffer_locked(jh2bh(jh)));
 
 	if (jh->b_transaction == NULL) {
+		/*
+		 * Previous journal_forget() could have left the buffer
+		 * with jbddirty bit set because it was being committed. When
+		 * the commit finished, we've filed the buffer for
+		 * checkpointing and marked it dirty. Now we are reallocating
+		 * the buffer so the transaction freeing it must have
+		 * committed and so it's safe to clear the dirty bit.
+		 */
+		clear_buffer_dirty(jh2bh(jh));
 		jh->b_transaction = transaction;
 
 		/* first access by this transaction */
@@ -1782,8 +1774,13 @@ static int __dispose_buffer(struct journal_head *jh, transaction_t *transaction)
 
 	if (jh->b_cp_transaction) {
 		JBUFFER_TRACE(jh, "on running+cp transaction");
+		/*
+		 * We don't want to write the buffer anymore, clear the
+		 * bit so that we don't confuse checks in
+		 * __journal_file_buffer
+		 */
+		clear_buffer_dirty(bh);
 		__journal_file_buffer(jh, transaction, BJ_Forget);
-		clear_buffer_jbddirty(bh);
 		may_free = 0;
 	} else {
 		JBUFFER_TRACE(jh, "on running transaction");
@@ -2041,12 +2038,17 @@ void __journal_file_buffer(struct journal_head *jh,
 	if (jh->b_transaction && jh->b_jlist == jlist)
 		return;
 
-	/* The following list of buffer states needs to be consistent
-	 * with __jbd_unexpected_dirty_buffer()'s handling of dirty
-	 * state. */
-
 	if (jlist == BJ_Metadata || jlist == BJ_Reserved ||
 	    jlist == BJ_Shadow || jlist == BJ_Forget) {
+		/*
+		 * For metadata buffers, we track dirty bit in buffer_jbddirty
+		 * instead of buffer_dirty. We should not see a dirty bit set
+		 * here because we clear it in do_get_write_access but e.g.
+		 * tune2fs can modify the sb and set the dirty bit at any time
+		 * so we try to gracefully handle that.
+		 */
+		if (buffer_dirty(bh))
+			warn_dirty_buffer(bh);
 		if (test_clear_buffer_dirty(bh) ||
 		    test_clear_buffer_jbddirty(bh))
 			was_dirty = 1;
diff --git a/fs/jfs/acl.c b/fs/jfs/acl.c
index 91fa3ad..a29c7c3 100644
--- a/fs/jfs/acl.c
+++ b/fs/jfs/acl.c
@@ -67,10 +67,8 @@ static struct posix_acl *jfs_get_acl(struct inode *inode, int type)
 		acl = posix_acl_from_xattr(value, size);
 	}
 	kfree(value);
-	if (!IS_ERR(acl)) {
+	if (!IS_ERR(acl))
 		set_cached_acl(inode, type, acl);
-		posix_acl_release(acl);
-	}
 	return acl;
 }
 
diff --git a/fs/notify/Kconfig b/fs/notify/Kconfig
index 31dac7e..dffbb09 100644
--- a/fs/notify/Kconfig
+++ b/fs/notify/Kconfig
@@ -1,15 +1,5 @@
 config FSNOTIFY
-	bool "Filesystem notification backend"
-	default y
-	---help---
-	   fsnotify is a backend for filesystem notification.  fsnotify does
-	   not provide any userspace interface but does provide the basis
-	   needed for other notification schemes such as dnotify, inotify,
-	   and fanotify.
-
-	   Say Y here to enable fsnotify suport.
-
-	   If unsure, say Y.
+	def_bool n
 
 source "fs/notify/dnotify/Kconfig"
 source "fs/notify/inotify/Kconfig"
diff --git a/fs/notify/dnotify/Kconfig b/fs/notify/dnotify/Kconfig
index 904ff8d..f9c1ca1 100644
--- a/fs/notify/dnotify/Kconfig
+++ b/fs/notify/dnotify/Kconfig
@@ -1,6 +1,6 @@
 config DNOTIFY
 	bool "Dnotify support"
-	depends on FSNOTIFY
+	select FSNOTIFY
 	default y
 	help
 	  Dnotify is a directory-based per-fd file change notification system
diff --git a/fs/notify/fsnotify.c b/fs/notify/fsnotify.c
index ec2f7bd..037e878 100644
--- a/fs/notify/fsnotify.c
+++ b/fs/notify/fsnotify.c
@@ -159,7 +159,9 @@ void fsnotify(struct inode *to_tell, __u32 mask, void *data, int data_is, const
 			if (!group->ops->should_send_event(group, to_tell, mask))
 				continue;
 			if (!event) {
-				event = fsnotify_create_event(to_tell, mask, data, data_is, file_name, cookie);
+				event = fsnotify_create_event(to_tell, mask, data,
+							      data_is, file_name, cookie,
+							      GFP_KERNEL);
 				/* shit, we OOM'd and now we can't tell, maybe
 				 * someday someone else will want to do something
 				 * here */
diff --git a/fs/notify/inotify/Kconfig b/fs/notify/inotify/Kconfig
index 5356884..3e56dbf 100644
--- a/fs/notify/inotify/Kconfig
+++ b/fs/notify/inotify/Kconfig
@@ -15,7 +15,7 @@ config INOTIFY
 
 config INOTIFY_USER
 	bool "Inotify support for userspace"
-	depends on FSNOTIFY
+	select FSNOTIFY
 	default y
 	---help---
 	  Say Y here to enable inotify support for userspace, including the
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index ff27a29..f30d9bb 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -57,7 +57,6 @@ int inotify_max_user_watches __read_mostly;
 
 static struct kmem_cache *inotify_inode_mark_cachep __read_mostly;
 struct kmem_cache *event_priv_cachep __read_mostly;
-static struct fsnotify_event *inotify_ignored_event;
 
 /*
  * When inotify registers a new group it increments this and uses that
@@ -365,6 +364,17 @@ static int inotify_find_inode(const char __user *dirname, struct path *path, uns
 	return error;
 }
 
+static void inotify_remove_from_idr(struct fsnotify_group *group,
+				    struct inotify_inode_mark_entry *ientry)
+{
+	struct idr *idr;
+
+	spin_lock(&group->inotify_data.idr_lock);
+	idr = &group->inotify_data.idr;
+	idr_remove(idr, ientry->wd);
+	spin_unlock(&group->inotify_data.idr_lock);
+	ientry->wd = -1;
+}
 /*
  * Send IN_IGNORED for this wd, remove this wd from the idr, and drop the
  * internal reference help on the mark because it is in the idr.
@@ -373,13 +383,19 @@ void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry,
 				    struct fsnotify_group *group)
 {
 	struct inotify_inode_mark_entry *ientry;
+	struct fsnotify_event *ignored_event;
 	struct inotify_event_private_data *event_priv;
 	struct fsnotify_event_private_data *fsn_event_priv;
-	struct idr *idr;
+
+	ignored_event = fsnotify_create_event(NULL, FS_IN_IGNORED, NULL,
+					      FSNOTIFY_EVENT_NONE, NULL, 0,
+					      GFP_NOFS);
+	if (!ignored_event)
+		return;
 
 	ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
 
-	event_priv = kmem_cache_alloc(event_priv_cachep, GFP_KERNEL);
+	event_priv = kmem_cache_alloc(event_priv_cachep, GFP_NOFS);
 	if (unlikely(!event_priv))
 		goto skip_send_ignore;
 
@@ -388,7 +404,7 @@ void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry,
 	fsn_event_priv->group = group;
 	event_priv->wd = ientry->wd;
 
-	fsnotify_add_notify_event(group, inotify_ignored_event, fsn_event_priv);
+	fsnotify_add_notify_event(group, ignored_event, fsn_event_priv);
 
 	/* did the private data get added? */
 	if (list_empty(&fsn_event_priv->event_list))
@@ -396,14 +412,16 @@ void inotify_ignored_and_remove_idr(struct fsnotify_mark_entry *entry,
 
 skip_send_ignore:
 
+	/* matches the reference taken when the event was created */
+	fsnotify_put_event(ignored_event);
+
 	/* remove this entry from the idr */
-	spin_lock(&group->inotify_data.idr_lock);
-	idr = &group->inotify_data.idr;
-	idr_remove(idr, ientry->wd);
-	spin_unlock(&group->inotify_data.idr_lock);
+	inotify_remove_from_idr(group, ientry);
 
 	/* removed from idr, drop that reference */
 	fsnotify_put_mark(entry);
+
+	atomic_dec(&group->inotify_data.user->inotify_watches);
 }
 
 /* ding dong the mark is dead */
@@ -418,6 +436,7 @@ static int inotify_update_watch(struct fsnotify_group *group, struct inode *inod
 {
 	struct fsnotify_mark_entry *entry = NULL;
 	struct inotify_inode_mark_entry *ientry;
+	struct inotify_inode_mark_entry *tmp_ientry;
 	int ret = 0;
 	int add = (arg & IN_MASK_ADD);
 	__u32 mask;
@@ -428,54 +447,66 @@ static int inotify_update_watch(struct fsnotify_group *group, struct inode *inod
 	if (unlikely(!mask))
 		return -EINVAL;
 
-	ientry = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL);
-	if (unlikely(!ientry))
+	tmp_ientry = kmem_cache_alloc(inotify_inode_mark_cachep, GFP_KERNEL);
+	if (unlikely(!tmp_ientry))
 		return -ENOMEM;
 	/* we set the mask at the end after attaching it */
-	fsnotify_init_mark(&ientry->fsn_entry, inotify_free_mark);
-	ientry->wd = 0;
+	fsnotify_init_mark(&tmp_ientry->fsn_entry, inotify_free_mark);
+	tmp_ientry->wd = -1;
 
 find_entry:
 	spin_lock(&inode->i_lock);
 	entry = fsnotify_find_mark_entry(group, inode);
 	spin_unlock(&inode->i_lock);
 	if (entry) {
-		kmem_cache_free(inotify_inode_mark_cachep, ientry);
 		ientry = container_of(entry, struct inotify_inode_mark_entry, fsn_entry);
 	} else {
-		if (atomic_read(&group->inotify_data.user->inotify_watches) >= inotify_max_user_watches) {
-			ret = -ENOSPC;
-			goto out_err;
-		}
-
-		ret = fsnotify_add_mark(&ientry->fsn_entry, group, inode);
-		if (ret == -EEXIST)
-			goto find_entry;
-		else if (ret)
+		ret = -ENOSPC;
+		if (atomic_read(&group->inotify_data.user->inotify_watches) >= inotify_max_user_watches)
 			goto out_err;
-
-		entry = &ientry->fsn_entry;
 retry:
 		ret = -ENOMEM;
 		if (unlikely(!idr_pre_get(&group->inotify_data.idr, GFP_KERNEL)))
 			goto out_err;
 
 		spin_lock(&group->inotify_data.idr_lock);
-		/* if entry is added to the idr we keep the reference obtained
-		 * through fsnotify_mark_add.  remember to drop this reference
-		 * when entry is removed from idr */
-		ret = idr_get_new_above(&group->inotify_data.idr, entry,
-					++group->inotify_data.last_wd,
-					&ientry->wd);
+		ret = idr_get_new_above(&group->inotify_data.idr, &tmp_ientry->fsn_entry,
+					group->inotify_data.last_wd,
+					&tmp_ientry->wd);
 		spin_unlock(&group->inotify_data.idr_lock);
 		if (ret) {
 			if (ret == -EAGAIN)
 				goto retry;
 			goto out_err;
 		}
+
+		ret = fsnotify_add_mark(&tmp_ientry->fsn_entry, group, inode);
+		if (ret) {
+			inotify_remove_from_idr(group, tmp_ientry);
+			if (ret == -EEXIST)
+				goto find_entry;
+			goto out_err;
+		}
+
+		/* tmp_ientry has been added to the inode, so we are all set up.
+		 * now we just need to make sure tmp_ientry doesn't get freed and
+		 * we need to set up entry and ientry so the generic code can
+		 * do its thing. */
+		ientry = tmp_ientry;
+		entry = &ientry->fsn_entry;
+		tmp_ientry = NULL;
+
 		atomic_inc(&group->inotify_data.user->inotify_watches);
+
+		/* update the idr hint */
+		group->inotify_data.last_wd = ientry->wd;
+
+		/* we put the mark on the idr, take a reference */
+		fsnotify_get_mark(entry);
 	}
 
+	ret = ientry->wd;
+
 	spin_lock(&entry->lock);
 
 	old_mask = entry->mask;
@@ -506,14 +537,19 @@ retry:
 			fsnotify_recalc_group_mask(group);
 	}
 
-	return ientry->wd;
+	/* this either matches fsnotify_find_mark_entry, or init_mark_entry
+	 * depending on which path we took... */
+	fsnotify_put_mark(entry);
 
 out_err:
-	/* see this isn't supposed to happen, just kill the watch */
-	if (entry) {
-		fsnotify_destroy_mark_by_entry(entry);
-		fsnotify_put_mark(entry);
+	/* could be an error, could be that we found an existing mark */
+	if (tmp_ientry) {
+		/* on the idr but didn't make it on the inode */
+		if (tmp_ientry->wd != -1)
+			inotify_remove_from_idr(group, tmp_ientry);
+		kmem_cache_free(inotify_inode_mark_cachep, tmp_ientry);
 	}
+
 	return ret;
 }
 
@@ -721,9 +757,6 @@ static int __init inotify_user_setup(void)
 
 	inotify_inode_mark_cachep = KMEM_CACHE(inotify_inode_mark_entry, SLAB_PANIC);
 	event_priv_cachep = KMEM_CACHE(inotify_event_private_data, SLAB_PANIC);
-	inotify_ignored_event = fsnotify_create_event(NULL, FS_IN_IGNORED, NULL, FSNOTIFY_EVENT_NONE, NULL, 0);
-	if (!inotify_ignored_event)
-		panic("unable to allocate the inotify ignored event\n");
 
 	inotify_max_queued_events = 16384;
 	inotify_max_user_instances = 128;
diff --git a/fs/notify/notification.c b/fs/notify/notification.c
index 959b73e..5213685 100644
--- a/fs/notify/notification.c
+++ b/fs/notify/notification.c
@@ -136,18 +136,24 @@ static bool event_compare(struct fsnotify_event *old, struct fsnotify_event *new
 {
 	if ((old->mask == new->mask) &&
 	    (old->to_tell == new->to_tell) &&
-	    (old->data_type == new->data_type)) {
+	    (old->data_type == new->data_type) &&
+	    (old->name_len == new->name_len)) {
 		switch (old->data_type) {
 		case (FSNOTIFY_EVENT_INODE):
-			if (old->inode == new->inode)
+			/* remember, after old was put on the wait_q we aren't
+			 * allowed to look at the inode any more, only thing
+			 * left to check was if the file_name is the same */
+			if (old->name_len &&
+			    !strcmp(old->file_name, new->file_name))
 				return true;
 			break;
 		case (FSNOTIFY_EVENT_PATH):
 			if ((old->path.mnt == new->path.mnt) &&
 			    (old->path.dentry == new->path.dentry))
 				return true;
+			break;
 		case (FSNOTIFY_EVENT_NONE):
-			return true;
+			return false;
 		};
 	}
 	return false;
@@ -339,18 +345,19 @@ static void initialize_event(struct fsnotify_event *event)
  * @name the filename, if available
  */
 struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask, void *data,
-					     int data_type, const char *name, u32 cookie)
+					     int data_type, const char *name, u32 cookie,
+					     gfp_t gfp)
 {
 	struct fsnotify_event *event;
 
-	event = kmem_cache_alloc(fsnotify_event_cachep, GFP_KERNEL);
+	event = kmem_cache_alloc(fsnotify_event_cachep, gfp);
 	if (!event)
 		return NULL;
 
 	initialize_event(event);
 
 	if (name) {
-		event->file_name = kstrdup(name, GFP_KERNEL);
+		event->file_name = kstrdup(name, gfp);
 		if (!event->file_name) {
 			kmem_cache_free(fsnotify_event_cachep, event);
 			return NULL;
diff --git a/fs/quota/dquot.c b/fs/quota/dquot.c
index 70f36c0..38f7bd5 100644
--- a/fs/quota/dquot.c
+++ b/fs/quota/dquot.c
@@ -2043,7 +2043,6 @@ static int vfs_load_quota_inode(struct inode *inode, int type, int format_id,
 		invalidate_bdev(sb->s_bdev);
 	}
 	mutex_lock(&dqopt->dqonoff_mutex);
-	mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA);
 	if (sb_has_quota_loaded(sb, type)) {
 		error = -EBUSY;
 		goto out_lock;
@@ -2054,9 +2053,11 @@ static int vfs_load_quota_inode(struct inode *inode, int type, int format_id,
 		 * possible) Also nobody should write to the file - we use
 		 * special IO operations which ignore the immutable bit. */
 		down_write(&dqopt->dqptr_sem);
+		mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA);
 		oldflags = inode->i_flags & (S_NOATIME | S_IMMUTABLE |
 					     S_NOQUOTA);
 		inode->i_flags |= S_NOQUOTA | S_NOATIME | S_IMMUTABLE;
+		mutex_unlock(&inode->i_mutex);
 		up_write(&dqopt->dqptr_sem);
 		sb->dq_op->drop(inode);
 	}
@@ -2080,7 +2081,6 @@ static int vfs_load_quota_inode(struct inode *inode, int type, int format_id,
 		goto out_file_init;
 	}
 	mutex_unlock(&dqopt->dqio_mutex);
-	mutex_unlock(&inode->i_mutex);
 	spin_lock(&dq_state_lock);
 	dqopt->flags |= dquot_state_flag(flags, type);
 	spin_unlock(&dq_state_lock);
@@ -2096,13 +2096,14 @@ out_file_init:
 out_lock:
 	if (oldflags != -1) {
 		down_write(&dqopt->dqptr_sem);
+		mutex_lock_nested(&inode->i_mutex, I_MUTEX_QUOTA);
 		/* Set the flags back (in the case of accidental quotaon()
 		 * on a wrong file we don't want to mess up the flags) */
 		inode->i_flags &= ~(S_NOATIME | S_NOQUOTA | S_IMMUTABLE);
 		inode->i_flags |= oldflags;
+		mutex_unlock(&inode->i_mutex);
 		up_write(&dqopt->dqptr_sem);
 	}
-	mutex_unlock(&inode->i_mutex);
 	mutex_unlock(&dqopt->dqonoff_mutex);
 out_fmt:
 	put_quota_format(fmt);
diff --git a/fs/ramfs/file-nommu.c b/fs/ramfs/file-nommu.c
index ebb2c41..11f0c06 100644
--- a/fs/ramfs/file-nommu.c
+++ b/fs/ramfs/file-nommu.c
@@ -20,6 +20,7 @@
 #include <linux/ramfs.h>
 #include <linux/pagevec.h>
 #include <linux/mman.h>
+#include <linux/sched.h>
 
 #include <asm/uaccess.h>
 #include "internal.h"
diff --git a/fs/sysfs/dir.c b/fs/sysfs/dir.c
index d88d0fa..14f2d71 100644
--- a/fs/sysfs/dir.c
+++ b/fs/sysfs/dir.c
@@ -939,8 +939,10 @@ again:
 	/* Remove from old parent's list and insert into new parent's list. */
 	sysfs_unlink_sibling(sd);
 	sysfs_get(new_parent_sd);
+	drop_nlink(old_parent->d_inode);
 	sysfs_put(sd->s_parent);
 	sd->s_parent = new_parent_sd;
+	inc_nlink(new_parent->d_inode);
 	sysfs_link_sibling(sd);
 
  out_unlock:
diff --git a/fs/udf/super.c b/fs/udf/super.c
index 6832135..9d1b8c2 100644
--- a/fs/udf/super.c
+++ b/fs/udf/super.c
@@ -1087,11 +1087,23 @@ static int udf_load_vat(struct super_block *sb, int p_index, int type1_index)
 	struct udf_inode_info *vati;
 	uint32_t pos;
 	struct virtualAllocationTable20 *vat20;
+	sector_t blocks = sb->s_bdev->bd_inode->i_size >> sb->s_blocksize_bits;
 
 	/* VAT file entry is in the last recorded block */
 	ino.partitionReferenceNum = type1_index;
 	ino.logicalBlockNum = sbi->s_last_block - map->s_partition_root;
 	sbi->s_vat_inode = udf_iget(sb, &ino);
+	if (!sbi->s_vat_inode &&
+	    sbi->s_last_block != blocks - 1) {
+		printk(KERN_NOTICE "UDF-fs: Failed to read VAT inode from the"
+		       " last recorded block (%lu), retrying with the last "
+		       "block of the device (%lu).\n",
+		       (unsigned long)sbi->s_last_block,
+		       (unsigned long)blocks - 1);
+		ino.partitionReferenceNum = type1_index;
+		ino.logicalBlockNum = blocks - 1 - map->s_partition_root;
+		sbi->s_vat_inode = udf_iget(sb, &ino);
+	}
 	if (!sbi->s_vat_inode)
 		return 1;
 
diff --git a/fs/xfs/linux-2.6/xfs_aops.c b/fs/xfs/linux-2.6/xfs_aops.c
index 7ec89fc..aecf251 100644
--- a/fs/xfs/linux-2.6/xfs_aops.c
+++ b/fs/xfs/linux-2.6/xfs_aops.c
@@ -1268,6 +1268,14 @@ xfs_vm_writepage(
 	if (!page_has_buffers(page))
 		create_empty_buffers(page, 1 << inode->i_blkbits, 0);
 
+
+	/*
+	 *  VM calculation for nr_to_write seems off.  Bump it way
+	 *  up, this gets simple streaming writes zippy again.
+	 *  To be reviewed again after Jens' writeback changes.
+	 */
+	wbc->nr_to_write *= 4;
+
 	/*
 	 * Convert delayed allocate, unwritten or unmapped space
 	 * to real space and flush out to disk.
diff --git a/fs/xfs/linux-2.6/xfs_iops.c b/fs/xfs/linux-2.6/xfs_iops.c
index 58973bb..8070b34 100644
--- a/fs/xfs/linux-2.6/xfs_iops.c
+++ b/fs/xfs/linux-2.6/xfs_iops.c
@@ -680,8 +680,8 @@ xfs_vn_fiemap(
 	else
 		bm.bmv_length = BTOBB(length);
 
-	/* our formatter will tell xfs_getbmap when to stop. */
-	bm.bmv_count = MAXEXTNUM;
+	/* We add one because in getbmap world count includes the header */
+	bm.bmv_count = fieinfo->fi_extents_max + 1;
 	bm.bmv_iflags = BMV_IF_PREALLOC;
 	if (fieinfo->fi_flags & FIEMAP_FLAG_XATTR)
 		bm.bmv_iflags |= BMV_IF_ATTRFORK;
diff --git a/include/asm-generic/4level-fixup.h b/include/asm-generic/4level-fixup.h
index 9d40e87..77ff547 100644
--- a/include/asm-generic/4level-fixup.h
+++ b/include/asm-generic/4level-fixup.h
@@ -27,9 +27,9 @@
 #define pud_page_vaddr(pud)		pgd_page_vaddr(pud)
 
 #undef pud_free_tlb
-#define pud_free_tlb(tlb, x)            do { } while (0)
+#define pud_free_tlb(tlb, x, addr)	do { } while (0)
 #define pud_free(mm, x)			do { } while (0)
-#define __pud_free_tlb(tlb, x)		do { } while (0)
+#define __pud_free_tlb(tlb, x, addr)	do { } while (0)
 
 #undef  pud_addr_end
 #define pud_addr_end(addr, end)		(end)
diff --git a/include/asm-generic/pgtable-nopmd.h b/include/asm-generic/pgtable-nopmd.h
index a7cdc48..725612b 100644
--- a/include/asm-generic/pgtable-nopmd.h
+++ b/include/asm-generic/pgtable-nopmd.h
@@ -59,7 +59,7 @@ static inline pmd_t * pmd_offset(pud_t * pud, unsigned long address)
 static inline void pmd_free(struct mm_struct *mm, pmd_t *pmd)
 {
 }
-#define __pmd_free_tlb(tlb, x)			do { } while (0)
+#define __pmd_free_tlb(tlb, x, a)		do { } while (0)
 
 #undef  pmd_addr_end
 #define pmd_addr_end(addr, end)			(end)
diff --git a/include/asm-generic/pgtable-nopud.h b/include/asm-generic/pgtable-nopud.h
index 87cf449..810431d 100644
--- a/include/asm-generic/pgtable-nopud.h
+++ b/include/asm-generic/pgtable-nopud.h
@@ -52,7 +52,7 @@ static inline pud_t * pud_offset(pgd_t * pgd, unsigned long address)
  */
 #define pud_alloc_one(mm, address)		NULL
 #define pud_free(mm, x)				do { } while (0)
-#define __pud_free_tlb(tlb, x)			do { } while (0)
+#define __pud_free_tlb(tlb, x, a)		do { } while (0)
 
 #undef  pud_addr_end
 #define pud_addr_end(addr, end)			(end)
diff --git a/include/asm-generic/tlb.h b/include/asm-generic/tlb.h
index f490e43..e43f976 100644
--- a/include/asm-generic/tlb.h
+++ b/include/asm-generic/tlb.h
@@ -123,24 +123,24 @@ static inline void tlb_remove_page(struct mmu_gather *tlb, struct page *page)
 		__tlb_remove_tlb_entry(tlb, ptep, address);	\
 	} while (0)
 
-#define pte_free_tlb(tlb, ptep)					\
+#define pte_free_tlb(tlb, ptep, address)			\
 	do {							\
 		tlb->need_flush = 1;				\
-		__pte_free_tlb(tlb, ptep);			\
+		__pte_free_tlb(tlb, ptep, address);		\
 	} while (0)
 
 #ifndef __ARCH_HAS_4LEVEL_HACK
-#define pud_free_tlb(tlb, pudp)					\
+#define pud_free_tlb(tlb, pudp, address)			\
 	do {							\
 		tlb->need_flush = 1;				\
-		__pud_free_tlb(tlb, pudp);			\
+		__pud_free_tlb(tlb, pudp, address);		\
 	} while (0)
 #endif
 
-#define pmd_free_tlb(tlb, pmdp)					\
+#define pmd_free_tlb(tlb, pmdp, address)			\
 	do {							\
 		tlb->need_flush = 1;				\
-		__pmd_free_tlb(tlb, pmdp);			\
+		__pmd_free_tlb(tlb, pmdp, address);		\
 	} while (0)
 
 #define tlb_migrate_finish(mm) do {} while (0)
diff --git a/include/drm/radeon_drm.h b/include/drm/radeon_drm.h
index 41862e9..af4b482 100644
--- a/include/drm/radeon_drm.h
+++ b/include/drm/radeon_drm.h
@@ -506,6 +506,8 @@ typedef struct {
 #define DRM_RADEON_GEM_WAIT_IDLE	0x24
 #define DRM_RADEON_CS			0x26
 #define DRM_RADEON_INFO			0x27
+#define DRM_RADEON_GEM_SET_TILING	0x28
+#define DRM_RADEON_GEM_GET_TILING	0x29
 
 #define DRM_IOCTL_RADEON_CP_INIT    DRM_IOW( DRM_COMMAND_BASE + DRM_RADEON_CP_INIT, drm_radeon_init_t)
 #define DRM_IOCTL_RADEON_CP_START   DRM_IO(  DRM_COMMAND_BASE + DRM_RADEON_CP_START)
@@ -544,7 +546,8 @@ typedef struct {
 #define DRM_IOCTL_RADEON_GEM_WAIT_IDLE	DRM_IOW(DRM_COMMAND_BASE + DRM_RADEON_GEM_WAIT_IDLE, struct drm_radeon_gem_wait_idle)
 #define DRM_IOCTL_RADEON_CS		DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_CS, struct drm_radeon_cs)
 #define DRM_IOCTL_RADEON_INFO		DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_INFO, struct drm_radeon_info)
-
+#define DRM_IOCTL_RADEON_SET_TILING	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_SET_TILING, struct drm_radeon_gem_set_tiling)
+#define DRM_IOCTL_RADEON_GET_TILING	DRM_IOWR(DRM_COMMAND_BASE + DRM_RADEON_GEM_GET_TILING, struct drm_radeon_gem_get_tiling)
 
 typedef struct drm_radeon_init {
 	enum {
@@ -796,6 +799,24 @@ struct drm_radeon_gem_create {
 	uint32_t	flags;
 };
 
+#define RADEON_TILING_MACRO 0x1
+#define RADEON_TILING_MICRO 0x2
+#define RADEON_TILING_SWAP  0x4
+#define RADEON_TILING_SURFACE  0x8 /* this object requires a surface
+				    * when mapped - i.e. front buffer */
+
+struct drm_radeon_gem_set_tiling {
+	uint32_t	handle;
+	uint32_t	tiling_flags;
+	uint32_t	pitch;
+};
+
+struct drm_radeon_gem_get_tiling {
+	uint32_t	handle;
+	uint32_t	tiling_flags;
+	uint32_t	pitch;
+};
+
 struct drm_radeon_gem_mmap {
 	uint32_t	handle;
 	uint32_t	pad;
diff --git a/include/drm/ttm/ttm_bo_driver.h b/include/drm/ttm/ttm_bo_driver.h
index 62ed733..a68829d 100644
--- a/include/drm/ttm/ttm_bo_driver.h
+++ b/include/drm/ttm/ttm_bo_driver.h
@@ -121,6 +121,7 @@ struct ttm_backend {
 #define TTM_PAGE_FLAG_SWAPPED         (1 << 4)
 #define TTM_PAGE_FLAG_PERSISTANT_SWAP (1 << 5)
 #define TTM_PAGE_FLAG_ZERO_ALLOC      (1 << 6)
+#define TTM_PAGE_FLAG_DMA32           (1 << 7)
 
 enum ttm_caching_state {
 	tt_uncached,
@@ -353,6 +354,14 @@ struct ttm_bo_driver {
 	int (*sync_obj_flush) (void *sync_obj, void *sync_arg);
 	void (*sync_obj_unref) (void **sync_obj);
 	void *(*sync_obj_ref) (void *sync_obj);
+
+	/* hook to notify driver about a driver move so it
+	 * can do tiling things */
+	void (*move_notify)(struct ttm_buffer_object *bo,
+			    struct ttm_mem_reg *new_mem);
+	/* notify the driver we are taking a fault on this BO
+	 * and have reserved it */
+	void (*fault_reserve_notify)(struct ttm_buffer_object *bo);
 };
 
 #define TTM_NUM_MEM_TYPES 8
@@ -429,6 +438,8 @@ struct ttm_bo_device {
 	 */
 
 	struct delayed_work wq;
+
+	bool need_dma32;
 };
 
 /**
@@ -648,7 +659,14 @@ extern int ttm_bo_device_release(struct ttm_bo_device *bdev);
 extern int ttm_bo_device_init(struct ttm_bo_device *bdev,
 			      struct ttm_mem_global *mem_glob,
 			      struct ttm_bo_driver *driver,
-			      uint64_t file_page_offset);
+			      uint64_t file_page_offset, bool need_dma32);
+
+/**
+ * ttm_bo_unmap_virtual
+ *
+ * @bo: tear down the virtual mappings for this BO
+ */
+extern void ttm_bo_unmap_virtual(struct ttm_buffer_object *bo);
 
 /**
  * ttm_bo_reserve:
diff --git a/include/drm/ttm/ttm_module.h b/include/drm/ttm/ttm_module.h
index 889a4c79..d1d4338 100644
--- a/include/drm/ttm/ttm_module.h
+++ b/include/drm/ttm/ttm_module.h
@@ -33,7 +33,7 @@
 
 #include <linux/kernel.h>
 
-#define TTM_PFX "[TTM]"
+#define TTM_PFX "[TTM] "
 
 enum ttm_global_types {
 	TTM_GLOBAL_TTM_MEM = 0,
diff --git a/include/linux/cb710.h b/include/linux/cb710.h
index 63bc9a4..8cc1041 100644
--- a/include/linux/cb710.h
+++ b/include/linux/cb710.h
@@ -140,29 +140,6 @@ void cb710_dump_regs(struct cb710_chip *chip, unsigned dump);
 #include <linux/highmem.h>
 #include <linux/scatterlist.h>
 
-/**
- * cb710_sg_miter_stop_writing - stop mapping iteration after writing
- * @miter: sg mapping iter to be stopped
- *
- * Description:
- *   Stops mapping iterator @miter.  @miter should have been started
- *   started using sg_miter_start().  A stopped iteration can be
- *   resumed by calling sg_miter_next() on it.  This is useful when
- *   resources (kmap) need to be released during iteration.
- *
- *   This is a convenience wrapper that will be optimized out for arches
- *   that don't need flush_kernel_dcache_page().
- *
- * Context:
- *   IRQ disabled if the SG_MITER_ATOMIC is set.  Don't care otherwise.
- */
-static inline void cb710_sg_miter_stop_writing(struct sg_mapping_iter *miter)
-{
-	if (miter->page)
-		flush_kernel_dcache_page(miter->page);
-	sg_miter_stop(miter);
-}
-
 /*
  * 32-bit PIO mapping sg iterator
  *
@@ -171,12 +148,12 @@ static inline void cb710_sg_miter_stop_writing(struct sg_mapping_iter *miter)
  * without DMA support).
  *
  * Best-case reading (transfer from device):
- *   sg_miter_start();
+ *   sg_miter_start(, SG_MITER_TO_SG);
  *   cb710_sg_dwiter_write_from_io();
- *   cb710_sg_miter_stop_writing();
+ *   sg_miter_stop();
  *
  * Best-case writing (transfer to device):
- *   sg_miter_start();
+ *   sg_miter_start(, SG_MITER_FROM_SG);
  *   cb710_sg_dwiter_read_to_io();
  *   sg_miter_stop();
  */
diff --git a/include/linux/cgroup.h b/include/linux/cgroup.h
index 665fa70..90bba9e 100644
--- a/include/linux/cgroup.h
+++ b/include/linux/cgroup.h
@@ -179,14 +179,11 @@ struct cgroup {
 	 */
 	struct list_head release_list;
 
-	/* pids_mutex protects the fields below */
+	/* pids_mutex protects pids_list and cached pid arrays. */
 	struct rw_semaphore pids_mutex;
-	/* Array of process ids in the cgroup */
-	pid_t *tasks_pids;
-	/* How many files are using the current tasks_pids array */
-	int pids_use_count;
-	/* Length of the current tasks_pids array */
-	int pids_length;
+
+	/* Linked list of struct cgroup_pids */
+	struct list_head pids_list;
 
 	/* For RCU-protected deletion */
 	struct rcu_head rcu_head;
@@ -366,6 +363,23 @@ int cgroup_task_count(const struct cgroup *cgrp);
 int cgroup_is_descendant(const struct cgroup *cgrp, struct task_struct *task);
 
 /*
+ * When the subsys has to access css and may add permanent refcnt to css,
+ * it should take care of racy conditions with rmdir(). Following set of
+ * functions, is for stop/restart rmdir if necessary.
+ * Because these will call css_get/put, "css" should be alive css.
+ *
+ *  cgroup_exclude_rmdir();
+ *  ...do some jobs which may access arbitrary empty cgroup
+ *  cgroup_release_and_wakeup_rmdir();
+ *
+ *  When someone removes a cgroup while cgroup_exclude_rmdir() holds it,
+ *  it sleeps and cgroup_release_and_wakeup_rmdir() will wake him up.
+ */
+
+void cgroup_exclude_rmdir(struct cgroup_subsys_state *css);
+void cgroup_release_and_wakeup_rmdir(struct cgroup_subsys_state *css);
+
+/*
  * Control Group subsystem type.
  * See Documentation/cgroups/cgroups.txt for details
  */
diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h
index c56457c..1219be4 100644
--- a/include/linux/clocksource.h
+++ b/include/linux/clocksource.h
@@ -293,7 +293,12 @@ static inline int clocksource_enable(struct clocksource *cs)
 	if (cs->enable)
 		ret = cs->enable(cs);
 
-	/* save mult_orig on enable */
+	/*
+	 * The frequency may have changed while the clocksource
+	 * was disabled. If so the code in ->enable() must update
+	 * the mult value to reflect the new frequency. Make sure
+	 * mult_orig follows this change.
+	 */
 	cs->mult_orig = cs->mult;
 
 	return ret;
@@ -309,6 +314,13 @@ static inline int clocksource_enable(struct clocksource *cs)
  */
 static inline void clocksource_disable(struct clocksource *cs)
 {
+	/*
+	 * Save mult_orig in mult so clocksource_enable() can
+	 * restore the value regardless if ->enable() updates
+	 * the value of mult or not.
+	 */
+	cs->mult = cs->mult_orig;
+
 	if (cs->disable)
 		cs->disable(cs);
 }
diff --git a/include/linux/device-mapper.h b/include/linux/device-mapper.h
index 0d63106..655e772 100644
--- a/include/linux/device-mapper.h
+++ b/include/linux/device-mapper.h
@@ -84,7 +84,7 @@ typedef int (*dm_merge_fn) (struct dm_target *ti, struct bvec_merge_data *bvm,
 
 typedef int (*iterate_devices_callout_fn) (struct dm_target *ti,
 					   struct dm_dev *dev,
-					   sector_t physical_start,
+					   sector_t start, sector_t len,
 					   void *data);
 
 typedef int (*dm_iterate_devices_fn) (struct dm_target *ti,
@@ -104,7 +104,7 @@ void dm_error(const char *message);
  * Combine device limits.
  */
 int dm_set_device_limits(struct dm_target *ti, struct dm_dev *dev,
-			 sector_t start, void *data);
+			 sector_t start, sector_t len, void *data);
 
 struct dm_dev {
 	struct block_device *bdev;
diff --git a/include/linux/ext3_fs.h b/include/linux/ext3_fs.h
index 634a5e5..7499b36 100644
--- a/include/linux/ext3_fs.h
+++ b/include/linux/ext3_fs.h
@@ -874,7 +874,7 @@ struct buffer_head * ext3_getblk (handle_t *, struct inode *, long, int, int *);
 struct buffer_head * ext3_bread (handle_t *, struct inode *, int, int, int *);
 int ext3_get_blocks_handle(handle_t *handle, struct inode *inode,
 	sector_t iblock, unsigned long maxblocks, struct buffer_head *bh_result,
-	int create, int extend_disksize);
+	int create);
 
 extern struct inode *ext3_iget(struct super_block *, unsigned long);
 extern int  ext3_write_inode (struct inode *, int);
diff --git a/include/linux/flex_array.h b/include/linux/flex_array.h
new file mode 100644
index 0000000..23c1ec7
--- /dev/null
+++ b/include/linux/flex_array.h
@@ -0,0 +1,47 @@
+#ifndef _FLEX_ARRAY_H
+#define _FLEX_ARRAY_H
+
+#include <linux/types.h>
+#include <asm/page.h>
+
+#define FLEX_ARRAY_PART_SIZE PAGE_SIZE
+#define FLEX_ARRAY_BASE_SIZE PAGE_SIZE
+
+struct flex_array_part;
+
+/*
+ * This is meant to replace cases where an array-like
+ * structure has gotten too big to fit into kmalloc()
+ * and the developer is getting tempted to use
+ * vmalloc().
+ */
+
+struct flex_array {
+	union {
+		struct {
+			int element_size;
+			int total_nr_elements;
+			struct flex_array_part *parts[0];
+		};
+		/*
+		 * This little trick makes sure that
+		 * sizeof(flex_array) == PAGE_SIZE
+		 */
+		char padding[FLEX_ARRAY_BASE_SIZE];
+	};
+};
+
+#define FLEX_ARRAY_INIT(size, total) { { {\
+	.element_size = (size),		\
+	.total_nr_elements = (total),	\
+} } }
+
+struct flex_array *flex_array_alloc(int element_size, int total, gfp_t flags);
+int flex_array_prealloc(struct flex_array *fa, int start, int end, gfp_t flags);
+void flex_array_free(struct flex_array *fa);
+void flex_array_free_parts(struct flex_array *fa);
+int flex_array_put(struct flex_array *fa, int element_nr, void *src,
+		gfp_t flags);
+void *flex_array_get(struct flex_array *fa, int element_nr);
+
+#endif /* _FLEX_ARRAY_H */
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 0872372..a36ffa5 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1946,6 +1946,7 @@ extern void putname(const char *name);
 extern int register_blkdev(unsigned int, const char *);
 extern void unregister_blkdev(unsigned int, const char *);
 extern struct block_device *bdget(dev_t);
+extern struct block_device *bdgrab(struct block_device *bdev);
 extern void bd_set_size(struct block_device *, loff_t size);
 extern void bd_forget(struct inode *inode);
 extern void bdput(struct block_device *);
diff --git a/include/linux/fsnotify_backend.h b/include/linux/fsnotify_backend.h
index 6c3de99..4d6f47b 100644
--- a/include/linux/fsnotify_backend.h
+++ b/include/linux/fsnotify_backend.h
@@ -352,7 +352,7 @@ extern void fsnotify_unmount_inodes(struct list_head *list);
 /* put here because inotify does some weird stuff when destroying watches */
 extern struct fsnotify_event *fsnotify_create_event(struct inode *to_tell, __u32 mask,
 						    void *data, int data_is, const char *name,
-						    u32 cookie);
+						    u32 cookie, gfp_t gfp);
 
 #else
 
diff --git a/include/linux/iocontext.h b/include/linux/iocontext.h
index dd05434..4da4a75 100644
--- a/include/linux/iocontext.h
+++ b/include/linux/iocontext.h
@@ -92,7 +92,7 @@ static inline struct io_context *ioc_task_link(struct io_context *ioc)
 	 * a race).
 	 */
 	if (ioc && atomic_long_inc_not_zero(&ioc->refcount)) {
-		atomic_long_inc(&ioc->refcount);
+		atomic_inc(&ioc->nr_tasks);
 		return ioc;
 	}
 
diff --git a/include/linux/lguest.h b/include/linux/lguest.h
index dbf2479..2fb1dcb 100644
--- a/include/linux/lguest.h
+++ b/include/linux/lguest.h
@@ -1,5 +1,7 @@
-/* Things the lguest guest needs to know.  Note: like all lguest interfaces,
- * this is subject to wild and random change between versions. */
+/*
+ * Things the lguest guest needs to know.  Note: like all lguest interfaces,
+ * this is subject to wild and random change between versions.
+ */
 #ifndef _LINUX_LGUEST_H
 #define _LINUX_LGUEST_H
 
@@ -11,32 +13,41 @@
 #define LG_CLOCK_MIN_DELTA	100UL
 #define LG_CLOCK_MAX_DELTA	ULONG_MAX
 
-/*G:031 The second method of communicating with the Host is to via "struct
+/*G:031
+ * The second method of communicating with the Host is to via "struct
  * lguest_data".  Once the Guest's initialization hypercall tells the Host where
- * this is, the Guest and Host both publish information in it. :*/
-struct lguest_data
-{
-	/* 512 == enabled (same as eflags in normal hardware).  The Guest
-	 * changes interrupts so often that a hypercall is too slow. */
+ * this is, the Guest and Host both publish information in it.
+:*/
+struct lguest_data {
+	/*
+	 * 512 == enabled (same as eflags in normal hardware).  The Guest
+	 * changes interrupts so often that a hypercall is too slow.
+	 */
 	unsigned int irq_enabled;
 	/* Fine-grained interrupt disabling by the Guest */
 	DECLARE_BITMAP(blocked_interrupts, LGUEST_IRQS);
 
-	/* The Host writes the virtual address of the last page fault here,
+	/*
+	 * The Host writes the virtual address of the last page fault here,
 	 * which saves the Guest a hypercall.  CR2 is the native register where
-	 * this address would normally be found. */
+	 * this address would normally be found.
+	 */
 	unsigned long cr2;
 
 	/* Wallclock time set by the Host. */
 	struct timespec time;
 
-	/* Interrupt pending set by the Host.  The Guest should do a hypercall
-	 * if it re-enables interrupts and sees this set (to X86_EFLAGS_IF). */
+	/*
+	 * Interrupt pending set by the Host.  The Guest should do a hypercall
+	 * if it re-enables interrupts and sees this set (to X86_EFLAGS_IF).
+	 */
 	int irq_pending;
 
-	/* Async hypercall ring.  Instead of directly making hypercalls, we can
+	/*
+	 * Async hypercall ring.  Instead of directly making hypercalls, we can
 	 * place them in here for processing the next time the Host wants.
-	 * This batching can be quite efficient. */
+	 * This batching can be quite efficient.
+	 */
 
 	/* 0xFF == done (set by Host), 0 == pending (set by Guest). */
 	u8 hcall_status[LHCALL_RING_SIZE];
diff --git a/include/linux/lguest_launcher.h b/include/linux/lguest_launcher.h
index bfefbdf..495203f 100644
--- a/include/linux/lguest_launcher.h
+++ b/include/linux/lguest_launcher.h
@@ -29,8 +29,10 @@ struct lguest_device_desc {
 	__u8 type;
 	/* The number of virtqueues (first in config array) */
 	__u8 num_vq;
-	/* The number of bytes of feature bits.  Multiply by 2: one for host
-	 * features and one for Guest acknowledgements. */
+	/*
+	 * The number of bytes of feature bits.  Multiply by 2: one for host
+	 * features and one for Guest acknowledgements.
+	 */
 	__u8 feature_len;
 	/* The number of bytes of the config array after virtqueues. */
 	__u8 config_len;
@@ -39,8 +41,10 @@ struct lguest_device_desc {
 	__u8 config[0];
 };
 
-/*D:135 This is how we expect the device configuration field for a virtqueue
- * to be laid out in config space. */
+/*D:135
+ * This is how we expect the device configuration field for a virtqueue
+ * to be laid out in config space.
+ */
 struct lguest_vqconfig {
 	/* The number of entries in the virtio_ring */
 	__u16 num;
@@ -61,7 +65,9 @@ enum lguest_req
 	LHREQ_EVENTFD, /* + address, fd. */
 };
 
-/* The alignment to use between consumer and producer parts of vring.
- * x86 pagesize for historical reasons. */
+/*
+ * The alignment to use between consumer and producer parts of vring.
+ * x86 pagesize for historical reasons.
+ */
 #define LGUEST_VRING_ALIGN	4096
 #endif /* _LINUX_LGUEST_LAUNCHER */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index 79b6d7f..e5b6e33 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -589,6 +589,7 @@ struct ata_device {
 #endif
 	/* n_sector is CLEAR_BEGIN, read comment above CLEAR_BEGIN */
 	u64			n_sectors;	/* size of device, if ATA */
+	u64			n_native_sectors; /* native size, if ATA */
 	unsigned int		class;		/* ATA_DEV_xxx */
 	unsigned long		unpark_deadline;
 
diff --git a/include/linux/of_mdio.h b/include/linux/of_mdio.h
index c9663c6..53b94e0 100644
--- a/include/linux/of_mdio.h
+++ b/include/linux/of_mdio.h
@@ -18,5 +18,8 @@ extern struct phy_device *of_phy_connect(struct net_device *dev,
 					 struct device_node *phy_np,
 					 void (*hndlr)(struct net_device *),
 					 u32 flags, phy_interface_t iface);
+extern struct phy_device *of_phy_connect_fixed_link(struct net_device *dev,
+					 void (*hndlr)(struct net_device *),
+					 phy_interface_t iface);
 
 #endif /* __LINUX_OF_MDIO_H */
diff --git a/include/linux/pps.h b/include/linux/pps.h
index cfe5c72..0194ab0 100644
--- a/include/linux/pps.h
+++ b/include/linux/pps.h
@@ -22,6 +22,8 @@
 #ifndef _PPS_H_
 #define _PPS_H_
 
+#include <linux/types.h>
+
 #define PPS_VERSION		"5.3.6"
 #define PPS_MAX_SOURCES		16		/* should be enough... */
 
diff --git a/include/linux/rfkill.h b/include/linux/rfkill.h
index 2ce2983..278777fa 100644
--- a/include/linux/rfkill.h
+++ b/include/linux/rfkill.h
@@ -224,7 +224,7 @@ void rfkill_destroy(struct rfkill *rfkill);
  * should be blocked) so that drivers need not keep track of the soft
  * block state -- which they might not be able to.
  */
-bool __must_check rfkill_set_hw_state(struct rfkill *rfkill, bool blocked);
+bool rfkill_set_hw_state(struct rfkill *rfkill, bool blocked);
 
 /**
  * rfkill_set_sw_state - Set the internal rfkill software block state
diff --git a/include/linux/scatterlist.h b/include/linux/scatterlist.h
index e599698..9aaf5bf 100644
--- a/include/linux/scatterlist.h
+++ b/include/linux/scatterlist.h
@@ -242,6 +242,8 @@ size_t sg_copy_to_buffer(struct scatterlist *sgl, unsigned int nents,
  */
 
 #define SG_MITER_ATOMIC		(1 << 0)	 /* use kmap_atomic */
+#define SG_MITER_TO_SG		(1 << 1)	/* flush back to phys on unmap */
+#define SG_MITER_FROM_SG	(1 << 2)	/* nop */
 
 struct sg_mapping_iter {
 	/* the following three fields can be accessed directly */
diff --git a/include/linux/tty.h b/include/linux/tty.h
index 1488d8c..e8c6c91 100644
--- a/include/linux/tty.h
+++ b/include/linux/tty.h
@@ -394,6 +394,7 @@ extern void __do_SAK(struct tty_struct *tty);
 extern void disassociate_ctty(int priv);
 extern void no_tty(void);
 extern void tty_flip_buffer_push(struct tty_struct *tty);
+extern void tty_flush_to_ldisc(struct tty_struct *tty);
 extern void tty_buffer_free_all(struct tty_struct *tty);
 extern void tty_buffer_flush(struct tty_struct *tty);
 extern void tty_buffer_init(struct tty_struct *tty);
diff --git a/include/linux/uio.h b/include/linux/uio.h
index b7fe138..98c1143 100644
--- a/include/linux/uio.h
+++ b/include/linux/uio.h
@@ -19,15 +19,6 @@ struct iovec
 	__kernel_size_t iov_len; /* Must be size_t (1003.1g) */
 };
 
-#ifdef __KERNEL__
-
-struct kvec {
-	void *iov_base; /* and that should *never* hold a userland pointer */
-	size_t iov_len;
-};
-
-#endif
-
 /*
  *	UIO_MAXIOV shall be at least 16 1003.1g (5.4.1.1)
  */
@@ -35,6 +26,13 @@ struct kvec {
 #define UIO_FASTIOV	8
 #define UIO_MAXIOV	1024
 
+#ifdef __KERNEL__
+
+struct kvec {
+	void *iov_base; /* and that should *never* hold a userland pointer */
+	size_t iov_len;
+};
+
 /*
  * Total number of bytes covered by an iovec.
  *
@@ -53,5 +51,6 @@ static inline size_t iov_length(const struct iovec *iov, unsigned long nr_segs)
 }
 
 unsigned long iov_shorten(struct iovec *iov, unsigned long nr_segs, size_t to);
+#endif
 
 #endif
diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h
index 95846d9..74f1687 100644
--- a/include/linux/videodev2.h
+++ b/include/linux/videodev2.h
@@ -338,6 +338,7 @@ struct v4l2_pix_format {
 /*  Vendor-specific formats   */
 #define V4L2_PIX_FMT_WNVA     v4l2_fourcc('W', 'N', 'V', 'A') /* Winnov hw compress */
 #define V4L2_PIX_FMT_SN9C10X  v4l2_fourcc('S', '9', '1', '0') /* SN9C10x compression */
+#define V4L2_PIX_FMT_SN9C20X_I420 v4l2_fourcc('S', '9', '2', '0') /* SN9C20x YUV 4:2:0 */
 #define V4L2_PIX_FMT_PWC1     v4l2_fourcc('P', 'W', 'C', '1') /* pwc older webcam */
 #define V4L2_PIX_FMT_PWC2     v4l2_fourcc('P', 'W', 'C', '2') /* pwc newer webcam */
 #define V4L2_PIX_FMT_ET61X251 v4l2_fourcc('E', '6', '2', '5') /* ET61X251 compression */
diff --git a/include/linux/virtio_blk.h b/include/linux/virtio_blk.h
index be7d255..8dab9f2 100644
--- a/include/linux/virtio_blk.h
+++ b/include/linux/virtio_blk.h
@@ -20,8 +20,7 @@
 
 #define VIRTIO_BLK_ID_BYTES	(sizeof(__u16[256]))	/* IDENTIFY DATA */
 
-struct virtio_blk_config
-{
+struct virtio_blk_config {
 	/* The capacity (in 512-byte sectors). */
 	__u64 capacity;
 	/* The maximum segment size (if VIRTIO_BLK_F_SIZE_MAX) */
@@ -50,8 +49,7 @@ struct virtio_blk_config
 #define VIRTIO_BLK_T_BARRIER	0x80000000
 
 /* This is the first element of the read scatter-gather list. */
-struct virtio_blk_outhdr
-{
+struct virtio_blk_outhdr {
 	/* VIRTIO_BLK_T* */
 	__u32 type;
 	/* io priority. */
diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h
index 99f5145..e547e3c 100644
--- a/include/linux/virtio_config.h
+++ b/include/linux/virtio_config.h
@@ -79,8 +79,7 @@
  *	the dev->feature bits if it wants.
  */
 typedef void vq_callback_t(struct virtqueue *);
-struct virtio_config_ops
-{
+struct virtio_config_ops {
 	void (*get)(struct virtio_device *vdev, unsigned offset,
 		    void *buf, unsigned len);
 	void (*set)(struct virtio_device *vdev, unsigned offset,
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index 9c543d6..d8dd539 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -31,8 +31,7 @@
 
 #define VIRTIO_NET_S_LINK_UP	1	/* Link is up */
 
-struct virtio_net_config
-{
+struct virtio_net_config {
 	/* The config defining mac address (if VIRTIO_NET_F_MAC) */
 	__u8 mac[6];
 	/* See VIRTIO_NET_F_STATUS and VIRTIO_NET_S_* above */
@@ -41,8 +40,7 @@ struct virtio_net_config
 
 /* This is the first element of the scatter-gather list.  If you don't
  * specify GSO or CSUM features, you can simply ignore the header. */
-struct virtio_net_hdr
-{
+struct virtio_net_hdr {
 #define VIRTIO_NET_HDR_F_NEEDS_CSUM	1	// Use csum_start, csum_offset
 	__u8 flags;
 #define VIRTIO_NET_HDR_GSO_NONE		0	// Not a GSO frame
diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h
index 693e0ec..e4d144b 100644
--- a/include/linux/virtio_ring.h
+++ b/include/linux/virtio_ring.h
@@ -30,8 +30,7 @@
 #define VIRTIO_RING_F_INDIRECT_DESC	28
 
 /* Virtio ring descriptors: 16 bytes.  These can chain together via "next". */
-struct vring_desc
-{
+struct vring_desc {
 	/* Address (guest-physical). */
 	__u64 addr;
 	/* Length. */
@@ -42,24 +41,21 @@ struct vring_desc
 	__u16 next;
 };
 
-struct vring_avail
-{
+struct vring_avail {
 	__u16 flags;
 	__u16 idx;
 	__u16 ring[];
 };
 
 /* u32 is used here for ids for padding reasons. */
-struct vring_used_elem
-{
+struct vring_used_elem {
 	/* Index of start of used descriptor chain. */
 	__u32 id;
 	/* Total length of the descriptor chain which was used (written to) */
 	__u32 len;
 };
 
-struct vring_used
-{
+struct vring_used {
 	__u16 flags;
 	__u16 idx;
 	struct vring_used_elem ring[];
diff --git a/include/media/v4l2-chip-ident.h b/include/media/v4l2-chip-ident.h
index 11a4a2d..94e908c 100644
--- a/include/media/v4l2-chip-ident.h
+++ b/include/media/v4l2-chip-ident.h
@@ -60,6 +60,10 @@ enum {
 	V4L2_IDENT_OV7670 = 250,
 	V4L2_IDENT_OV7720 = 251,
 	V4L2_IDENT_OV7725 = 252,
+	V4L2_IDENT_OV7660 = 253,
+	V4L2_IDENT_OV9650 = 254,
+	V4L2_IDENT_OV9655 = 255,
+	V4L2_IDENT_SOI968 = 256,
 
 	/* module saa7146: reserved range 300-309 */
 	V4L2_IDENT_SAA7146 = 300,
@@ -161,6 +165,9 @@ enum {
 	/* module tw9910: just ident 9910 */
 	V4L2_IDENT_TW9910 = 9910,
 
+	/* module sn9c20x: just ident 10000 */
+	V4L2_IDENT_SN9C20X = 10000,
+
 	/* module msp3400: reserved range 34000-34999 and 44000-44999 */
 	V4L2_IDENT_MSPX4XX  = 34000, /* generic MSPX4XX identifier, only
 					use internally (tveeprom.c). */
@@ -237,6 +244,11 @@ enum {
 	V4L2_IDENT_MT9V022IX7ATC	= 45010, /* No way to detect "normal" I77ATx */
 	V4L2_IDENT_MT9V022IX7ATM	= 45015, /* and "lead free" IA7ATx chips */
 	V4L2_IDENT_MT9T031		= 45020,
+	V4L2_IDENT_MT9V111		= 45031,
+	V4L2_IDENT_MT9V112		= 45032,
+
+	/* HV7131R CMOS sensor: just ident 46000 */
+	V4L2_IDENT_HV7131R		= 46000,
 
 	/* module cs53132a: just ident 53132 */
 	V4L2_IDENT_CS53l32A = 53132,
diff --git a/include/net/rose.h b/include/net/rose.h
index cbd5364..5ba9f02 100644
--- a/include/net/rose.h
+++ b/include/net/rose.h
@@ -156,7 +156,7 @@ extern int  sysctl_rose_maximum_vcs;
 extern int  sysctl_rose_window_size;
 extern int  rosecmp(rose_address *, rose_address *);
 extern int  rosecmpm(rose_address *, rose_address *, unsigned short);
-extern const char *rose2asc(const rose_address *);
+extern char *rose2asc(char *buf, const rose_address *);
 extern struct sock *rose_find_socket(unsigned int, struct rose_neigh *);
 extern void rose_kill_by_neigh(struct rose_neigh *);
 extern unsigned int rose_new_lci(struct rose_neigh *);
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 3737a68..b6eadfe 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -47,6 +47,7 @@
 #include <linux/hash.h>
 #include <linux/namei.h>
 #include <linux/smp_lock.h>
+#include <linux/pid_namespace.h>
 
 #include <asm/atomic.h>
 
@@ -734,16 +735,28 @@ static void cgroup_d_remove_dir(struct dentry *dentry)
  * reference to css->refcnt. In general, this refcnt is expected to goes down
  * to zero, soon.
  *
- * CGRP_WAIT_ON_RMDIR flag is modified under cgroup's inode->i_mutex;
+ * CGRP_WAIT_ON_RMDIR flag is set under cgroup's inode->i_mutex;
  */
 DECLARE_WAIT_QUEUE_HEAD(cgroup_rmdir_waitq);
 
-static void cgroup_wakeup_rmdir_waiters(const struct cgroup *cgrp)
+static void cgroup_wakeup_rmdir_waiter(struct cgroup *cgrp)
 {
-	if (unlikely(test_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags)))
+	if (unlikely(test_and_clear_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags)))
 		wake_up_all(&cgroup_rmdir_waitq);
 }
 
+void cgroup_exclude_rmdir(struct cgroup_subsys_state *css)
+{
+	css_get(css);
+}
+
+void cgroup_release_and_wakeup_rmdir(struct cgroup_subsys_state *css)
+{
+	cgroup_wakeup_rmdir_waiter(css->cgroup);
+	css_put(css);
+}
+
+
 static int rebind_subsystems(struct cgroupfs_root *root,
 			      unsigned long final_bits)
 {
@@ -960,6 +973,7 @@ static void init_cgroup_housekeeping(struct cgroup *cgrp)
 	INIT_LIST_HEAD(&cgrp->children);
 	INIT_LIST_HEAD(&cgrp->css_sets);
 	INIT_LIST_HEAD(&cgrp->release_list);
+	INIT_LIST_HEAD(&cgrp->pids_list);
 	init_rwsem(&cgrp->pids_mutex);
 }
 static void init_cgroup_root(struct cgroupfs_root *root)
@@ -1357,7 +1371,7 @@ int cgroup_attach_task(struct cgroup *cgrp, struct task_struct *tsk)
 	 * wake up rmdir() waiter. the rmdir should fail since the cgroup
 	 * is no longer empty.
 	 */
-	cgroup_wakeup_rmdir_waiters(cgrp);
+	cgroup_wakeup_rmdir_waiter(cgrp);
 	return 0;
 }
 
@@ -2201,12 +2215,30 @@ err:
 	return ret;
 }
 
+/*
+ * Cache pids for all threads in the same pid namespace that are
+ * opening the same "tasks" file.
+ */
+struct cgroup_pids {
+	/* The node in cgrp->pids_list */
+	struct list_head list;
+	/* The cgroup those pids belong to */
+	struct cgroup *cgrp;
+	/* The namepsace those pids belong to */
+	struct pid_namespace *ns;
+	/* Array of process ids in the cgroup */
+	pid_t *tasks_pids;
+	/* How many files are using the this tasks_pids array */
+	int use_count;
+	/* Length of the current tasks_pids array */
+	int length;
+};
+
 static int cmppid(const void *a, const void *b)
 {
 	return *(pid_t *)a - *(pid_t *)b;
 }
 
-
 /*
  * seq_file methods for the "tasks" file. The seq_file position is the
  * next pid to display; the seq_file iterator is a pointer to the pid
@@ -2221,45 +2253,47 @@ static void *cgroup_tasks_start(struct seq_file *s, loff_t *pos)
 	 * after a seek to the start). Use a binary-search to find the
 	 * next pid to display, if any
 	 */
-	struct cgroup *cgrp = s->private;
+	struct cgroup_pids *cp = s->private;
+	struct cgroup *cgrp = cp->cgrp;
 	int index = 0, pid = *pos;
 	int *iter;
 
 	down_read(&cgrp->pids_mutex);
 	if (pid) {
-		int end = cgrp->pids_length;
+		int end = cp->length;
 
 		while (index < end) {
 			int mid = (index + end) / 2;
-			if (cgrp->tasks_pids[mid] == pid) {
+			if (cp->tasks_pids[mid] == pid) {
 				index = mid;
 				break;
-			} else if (cgrp->tasks_pids[mid] <= pid)
+			} else if (cp->tasks_pids[mid] <= pid)
 				index = mid + 1;
 			else
 				end = mid;
 		}
 	}
 	/* If we're off the end of the array, we're done */
-	if (index >= cgrp->pids_length)
+	if (index >= cp->length)
 		return NULL;
 	/* Update the abstract position to be the actual pid that we found */
-	iter = cgrp->tasks_pids + index;
+	iter = cp->tasks_pids + index;
 	*pos = *iter;
 	return iter;
 }
 
 static void cgroup_tasks_stop(struct seq_file *s, void *v)
 {
-	struct cgroup *cgrp = s->private;
+	struct cgroup_pids *cp = s->private;
+	struct cgroup *cgrp = cp->cgrp;
 	up_read(&cgrp->pids_mutex);
 }
 
 static void *cgroup_tasks_next(struct seq_file *s, void *v, loff_t *pos)
 {
-	struct cgroup *cgrp = s->private;
+	struct cgroup_pids *cp = s->private;
 	int *p = v;
-	int *end = cgrp->tasks_pids + cgrp->pids_length;
+	int *end = cp->tasks_pids + cp->length;
 
 	/*
 	 * Advance to the next pid in the array. If this goes off the
@@ -2286,26 +2320,33 @@ static struct seq_operations cgroup_tasks_seq_operations = {
 	.show = cgroup_tasks_show,
 };
 
-static void release_cgroup_pid_array(struct cgroup *cgrp)
+static void release_cgroup_pid_array(struct cgroup_pids *cp)
 {
+	struct cgroup *cgrp = cp->cgrp;
+
 	down_write(&cgrp->pids_mutex);
-	BUG_ON(!cgrp->pids_use_count);
-	if (!--cgrp->pids_use_count) {
-		kfree(cgrp->tasks_pids);
-		cgrp->tasks_pids = NULL;
-		cgrp->pids_length = 0;
+	BUG_ON(!cp->use_count);
+	if (!--cp->use_count) {
+		list_del(&cp->list);
+		put_pid_ns(cp->ns);
+		kfree(cp->tasks_pids);
+		kfree(cp);
 	}
 	up_write(&cgrp->pids_mutex);
 }
 
 static int cgroup_tasks_release(struct inode *inode, struct file *file)
 {
-	struct cgroup *cgrp = __d_cgrp(file->f_dentry->d_parent);
+	struct seq_file *seq;
+	struct cgroup_pids *cp;
 
 	if (!(file->f_mode & FMODE_READ))
 		return 0;
 
-	release_cgroup_pid_array(cgrp);
+	seq = file->private_data;
+	cp = seq->private;
+
+	release_cgroup_pid_array(cp);
 	return seq_release(inode, file);
 }
 
@@ -2324,6 +2365,8 @@ static struct file_operations cgroup_tasks_operations = {
 static int cgroup_tasks_open(struct inode *unused, struct file *file)
 {
 	struct cgroup *cgrp = __d_cgrp(file->f_dentry->d_parent);
+	struct pid_namespace *ns = current->nsproxy->pid_ns;
+	struct cgroup_pids *cp;
 	pid_t *pidarray;
 	int npids;
 	int retval;
@@ -2350,20 +2393,37 @@ static int cgroup_tasks_open(struct inode *unused, struct file *file)
 	 * array if necessary
 	 */
 	down_write(&cgrp->pids_mutex);
-	kfree(cgrp->tasks_pids);
-	cgrp->tasks_pids = pidarray;
-	cgrp->pids_length = npids;
-	cgrp->pids_use_count++;
+
+	list_for_each_entry(cp, &cgrp->pids_list, list) {
+		if (ns == cp->ns)
+			goto found;
+	}
+
+	cp = kzalloc(sizeof(*cp), GFP_KERNEL);
+	if (!cp) {
+		up_write(&cgrp->pids_mutex);
+		kfree(pidarray);
+		return -ENOMEM;
+	}
+	cp->cgrp = cgrp;
+	cp->ns = ns;
+	get_pid_ns(ns);
+	list_add(&cp->list, &cgrp->pids_list);
+found:
+	kfree(cp->tasks_pids);
+	cp->tasks_pids = pidarray;
+	cp->length = npids;
+	cp->use_count++;
 	up_write(&cgrp->pids_mutex);
 
 	file->f_op = &cgroup_tasks_operations;
 
 	retval = seq_open(file, &cgroup_tasks_seq_operations);
 	if (retval) {
-		release_cgroup_pid_array(cgrp);
+		release_cgroup_pid_array(cp);
 		return retval;
 	}
-	((struct seq_file *)file->private_data)->private = cgrp;
+	((struct seq_file *)file->private_data)->private = cp;
 	return 0;
 }
 
@@ -2696,33 +2756,42 @@ again:
 	mutex_unlock(&cgroup_mutex);
 
 	/*
+	 * In general, subsystem has no css->refcnt after pre_destroy(). But
+	 * in racy cases, subsystem may have to get css->refcnt after
+	 * pre_destroy() and it makes rmdir return with -EBUSY. This sometimes
+	 * make rmdir return -EBUSY too often. To avoid that, we use waitqueue
+	 * for cgroup's rmdir. CGRP_WAIT_ON_RMDIR is for synchronizing rmdir
+	 * and subsystem's reference count handling. Please see css_get/put
+	 * and css_tryget() and cgroup_wakeup_rmdir_waiter() implementation.
+	 */
+	set_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags);
+
+	/*
 	 * Call pre_destroy handlers of subsys. Notify subsystems
 	 * that rmdir() request comes.
 	 */
 	ret = cgroup_call_pre_destroy(cgrp);
-	if (ret)
+	if (ret) {
+		clear_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags);
 		return ret;
+	}
 
 	mutex_lock(&cgroup_mutex);
 	parent = cgrp->parent;
 	if (atomic_read(&cgrp->count) || !list_empty(&cgrp->children)) {
+		clear_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags);
 		mutex_unlock(&cgroup_mutex);
 		return -EBUSY;
 	}
-	/*
-	 * css_put/get is provided for subsys to grab refcnt to css. In typical
-	 * case, subsystem has no reference after pre_destroy(). But, under
-	 * hierarchy management, some *temporal* refcnt can be hold.
-	 * To avoid returning -EBUSY to a user, waitqueue is used. If subsys
-	 * is really busy, it should return -EBUSY at pre_destroy(). wake_up
-	 * is called when css_put() is called and refcnt goes down to 0.
-	 */
-	set_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags);
 	prepare_to_wait(&cgroup_rmdir_waitq, &wait, TASK_INTERRUPTIBLE);
-
 	if (!cgroup_clear_css_refs(cgrp)) {
 		mutex_unlock(&cgroup_mutex);
-		schedule();
+		/*
+		 * Because someone may call cgroup_wakeup_rmdir_waiter() before
+		 * prepare_to_wait(), we need to check this flag.
+		 */
+		if (test_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags))
+			schedule();
 		finish_wait(&cgroup_rmdir_waitq, &wait);
 		clear_bit(CGRP_WAIT_ON_RMDIR, &cgrp->flags);
 		if (signal_pending(current))
@@ -3294,7 +3363,7 @@ void __css_put(struct cgroup_subsys_state *css)
 			set_bit(CGRP_RELEASABLE, &cgrp->flags);
 			check_for_release(cgrp);
 		}
-		cgroup_wakeup_rmdir_waiters(cgrp);
+		cgroup_wakeup_rmdir_waiter(cgrp);
 	}
 	rcu_read_unlock();
 }
diff --git a/kernel/fork.c b/kernel/fork.c
index 9b42695..29b532e 100644
--- a/kernel/fork.c
+++ b/kernel/fork.c
@@ -426,6 +426,7 @@ static struct mm_struct * mm_init(struct mm_struct * mm, struct task_struct *p)
 	init_rwsem(&mm->mmap_sem);
 	INIT_LIST_HEAD(&mm->mmlist);
 	mm->flags = (current->mm) ? current->mm->flags : default_dump_filter;
+	mm->oom_adj = (current->mm) ? current->mm->oom_adj : 0;
 	mm->core_state = NULL;
 	mm->nr_ptes = 0;
 	set_mm_counter(mm, file_rss, 0);
diff --git a/kernel/kexec.c b/kernel/kexec.c
index ae1c352..f336e21 100644
--- a/kernel/kexec.c
+++ b/kernel/kexec.c
@@ -1228,7 +1228,7 @@ static int __init parse_crashkernel_mem(char 			*cmdline,
 	} while (*cur++ == ',');
 
 	if (*crash_size > 0) {
-		while (*cur != ' ' && *cur != '@')
+		while (*cur && *cur != ' ' && *cur != '@')
 			cur++;
 		if (*cur == '@') {
 			cur++;
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index 16b5739..0540948 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -694,7 +694,7 @@ int __kprobes register_kprobe(struct kprobe *p)
 	p->addr = addr;
 
 	preempt_disable();
-	if (!__kernel_text_address((unsigned long) p->addr) ||
+	if (!kernel_text_address((unsigned long) p->addr) ||
 	    in_kprobes_functions((unsigned long) p->addr)) {
 		preempt_enable();
 		return -EINVAL;
diff --git a/kernel/kthread.c b/kernel/kthread.c
index 9b1a7de..eb8751a 100644
--- a/kernel/kthread.c
+++ b/kernel/kthread.c
@@ -180,10 +180,12 @@ EXPORT_SYMBOL(kthread_bind);
  * @k: thread created by kthread_create().
  *
  * Sets kthread_should_stop() for @k to return true, wakes it, and
- * waits for it to exit.  Your threadfn() must not call do_exit()
- * itself if you use this function!  This can also be called after
- * kthread_create() instead of calling wake_up_process(): the thread
- * will exit without calling threadfn().
+ * waits for it to exit. This can also be called after kthread_create()
+ * instead of calling wake_up_process(): the thread will exit without
+ * calling threadfn().
+ *
+ * If threadfn() may call do_exit() itself, the caller must ensure
+ * task_struct can't go away.
  *
  * Returns the result of threadfn(), or %-EINTR if wake_up_process()
  * was never called.
diff --git a/kernel/module.c b/kernel/module.c
index 0a04983..fd141140 100644
--- a/kernel/module.c
+++ b/kernel/module.c
@@ -1068,7 +1068,8 @@ static inline int check_modstruct_version(Elf_Shdr *sechdrs,
 {
 	const unsigned long *crc;
 
-	if (!find_symbol("module_layout", NULL, &crc, true, false))
+	if (!find_symbol(MODULE_SYMBOL_PREFIX "module_layout", NULL,
+			 &crc, true, false))
 		BUG();
 	return check_version(sechdrs, versindex, "module_layout", mod, crc);
 }
diff --git a/kernel/profile.c b/kernel/profile.c
index 69911b5..419250e 100644
--- a/kernel/profile.c
+++ b/kernel/profile.c
@@ -117,11 +117,12 @@ int __ref profile_init(void)
 
 	cpumask_copy(prof_cpu_mask, cpu_possible_mask);
 
-	prof_buffer = kzalloc(buffer_bytes, GFP_KERNEL);
+	prof_buffer = kzalloc(buffer_bytes, GFP_KERNEL|__GFP_NOWARN);
 	if (prof_buffer)
 		return 0;
 
-	prof_buffer = alloc_pages_exact(buffer_bytes, GFP_KERNEL|__GFP_ZERO);
+	prof_buffer = alloc_pages_exact(buffer_bytes,
+					GFP_KERNEL|__GFP_ZERO|__GFP_NOWARN);
 	if (prof_buffer)
 		return 0;
 
diff --git a/kernel/trace/ftrace.c b/kernel/trace/ftrace.c
index 4521c77..1f3ec2a 100644
--- a/kernel/trace/ftrace.c
+++ b/kernel/trace/ftrace.c
@@ -2596,6 +2596,14 @@ ftrace_graph_open(struct inode *inode, struct file *file)
 }
 
 static int
+ftrace_graph_release(struct inode *inode, struct file *file)
+{
+	if (file->f_mode & FMODE_READ)
+		seq_release(inode, file);
+	return 0;
+}
+
+static int
 ftrace_set_func(unsigned long *array, int *idx, char *buffer)
 {
 	struct dyn_ftrace *rec;
@@ -2724,9 +2732,10 @@ ftrace_graph_write(struct file *file, const char __user *ubuf,
 }
 
 static const struct file_operations ftrace_graph_fops = {
-	.open = ftrace_graph_open,
-	.read = seq_read,
-	.write = ftrace_graph_write,
+	.open		= ftrace_graph_open,
+	.read		= seq_read,
+	.write		= ftrace_graph_write,
+	.release	= ftrace_graph_release,
 };
 #endif /* CONFIG_FUNCTION_GRAPH_TRACER */
 
diff --git a/kernel/trace/trace_stack.c b/kernel/trace/trace_stack.c
index e644af9..6a2a9d4 100644
--- a/kernel/trace/trace_stack.c
+++ b/kernel/trace/trace_stack.c
@@ -301,17 +301,14 @@ static const struct seq_operations stack_trace_seq_ops = {
 
 static int stack_trace_open(struct inode *inode, struct file *file)
 {
-	int ret;
-
-	ret = seq_open(file, &stack_trace_seq_ops);
-
-	return ret;
+	return seq_open(file, &stack_trace_seq_ops);
 }
 
 static const struct file_operations stack_trace_fops = {
 	.open		= stack_trace_open,
 	.read		= seq_read,
 	.llseek		= seq_lseek,
+	.release	= seq_release,
 };
 
 int
diff --git a/kernel/trace/trace_stat.c b/kernel/trace/trace_stat.c
index e66f5e4..aea321c 100644
--- a/kernel/trace/trace_stat.c
+++ b/kernel/trace/trace_stat.c
@@ -73,7 +73,7 @@ static struct rb_node *release_next(struct rb_node *node)
 	}
 }
 
-static void reset_stat_session(struct stat_session *session)
+static void __reset_stat_session(struct stat_session *session)
 {
 	struct rb_node *node = session->stat_root.rb_node;
 
@@ -83,10 +83,17 @@ static void reset_stat_session(struct stat_session *session)
 	session->stat_root = RB_ROOT;
 }
 
+static void reset_stat_session(struct stat_session *session)
+{
+	mutex_lock(&session->stat_mutex);
+	__reset_stat_session(session);
+	mutex_unlock(&session->stat_mutex);
+}
+
 static void destroy_session(struct stat_session *session)
 {
 	debugfs_remove(session->file);
-	reset_stat_session(session);
+	__reset_stat_session(session);
 	mutex_destroy(&session->stat_mutex);
 	kfree(session);
 }
@@ -150,7 +157,7 @@ static int stat_seq_init(struct stat_session *session)
 	int i;
 
 	mutex_lock(&session->stat_mutex);
-	reset_stat_session(session);
+	__reset_stat_session(session);
 
 	if (!ts->stat_cmp)
 		ts->stat_cmp = dummy_cmp;
@@ -183,7 +190,7 @@ exit:
 	return ret;
 
 exit_free_rbtree:
-	reset_stat_session(session);
+	__reset_stat_session(session);
 	mutex_unlock(&session->stat_mutex);
 	return ret;
 }
@@ -250,16 +257,21 @@ static const struct seq_operations trace_stat_seq_ops = {
 static int tracing_stat_open(struct inode *inode, struct file *file)
 {
 	int ret;
-
+	struct seq_file *m;
 	struct stat_session *session = inode->i_private;
 
+	ret = stat_seq_init(session);
+	if (ret)
+		return ret;
+
 	ret = seq_open(file, &trace_stat_seq_ops);
-	if (!ret) {
-		struct seq_file *m = file->private_data;
-		m->private = session;
-		ret = stat_seq_init(session);
+	if (ret) {
+		reset_stat_session(session);
+		return ret;
 	}
 
+	m = file->private_data;
+	m->private = session;
 	return ret;
 }
 
@@ -270,11 +282,9 @@ static int tracing_stat_release(struct inode *i, struct file *f)
 {
 	struct stat_session *session = i->i_private;
 
-	mutex_lock(&session->stat_mutex);
 	reset_stat_session(session);
-	mutex_unlock(&session->stat_mutex);
 
-	return 0;
+	return seq_release(i, f);
 }
 
 static const struct file_operations tracing_stat_fops = {
diff --git a/lib/Makefile b/lib/Makefile
index b6d1857..2e78277 100644
--- a/lib/Makefile
+++ b/lib/Makefile
@@ -12,7 +12,7 @@ lib-y := ctype.o string.o vsprintf.o cmdline.o \
 	 idr.o int_sqrt.o extable.o prio_tree.o \
 	 sha1.o irq_regs.o reciprocal_div.o argv_split.o \
 	 proportions.o prio_heap.o ratelimit.o show_mem.o \
-	 is_single_threaded.o plist.o decompress.o
+	 is_single_threaded.o plist.o decompress.o flex_array.o
 
 lib-$(CONFIG_MMU) += ioremap.o
 lib-$(CONFIG_SMP) += cpumask.o
diff --git a/lib/atomic64.c b/lib/atomic64.c
index c5e7255..8bee16e 100644
--- a/lib/atomic64.c
+++ b/lib/atomic64.c
@@ -13,6 +13,7 @@
 #include <linux/cache.h>
 #include <linux/spinlock.h>
 #include <linux/init.h>
+#include <linux/module.h>
 #include <asm/atomic.h>
 
 /*
@@ -52,6 +53,7 @@ long long atomic64_read(const atomic64_t *v)
 	spin_unlock_irqrestore(lock, flags);
 	return val;
 }
+EXPORT_SYMBOL(atomic64_read);
 
 void atomic64_set(atomic64_t *v, long long i)
 {
@@ -62,6 +64,7 @@ void atomic64_set(atomic64_t *v, long long i)
 	v->counter = i;
 	spin_unlock_irqrestore(lock, flags);
 }
+EXPORT_SYMBOL(atomic64_set);
 
 void atomic64_add(long long a, atomic64_t *v)
 {
@@ -72,6 +75,7 @@ void atomic64_add(long long a, atomic64_t *v)
 	v->counter += a;
 	spin_unlock_irqrestore(lock, flags);
 }
+EXPORT_SYMBOL(atomic64_add);
 
 long long atomic64_add_return(long long a, atomic64_t *v)
 {
@@ -84,6 +88,7 @@ long long atomic64_add_return(long long a, atomic64_t *v)
 	spin_unlock_irqrestore(lock, flags);
 	return val;
 }
+EXPORT_SYMBOL(atomic64_add_return);
 
 void atomic64_sub(long long a, atomic64_t *v)
 {
@@ -94,6 +99,7 @@ void atomic64_sub(long long a, atomic64_t *v)
 	v->counter -= a;
 	spin_unlock_irqrestore(lock, flags);
 }
+EXPORT_SYMBOL(atomic64_sub);
 
 long long atomic64_sub_return(long long a, atomic64_t *v)
 {
@@ -106,6 +112,7 @@ long long atomic64_sub_return(long long a, atomic64_t *v)
 	spin_unlock_irqrestore(lock, flags);
 	return val;
 }
+EXPORT_SYMBOL(atomic64_sub_return);
 
 long long atomic64_dec_if_positive(atomic64_t *v)
 {
@@ -120,6 +127,7 @@ long long atomic64_dec_if_positive(atomic64_t *v)
 	spin_unlock_irqrestore(lock, flags);
 	return val;
 }
+EXPORT_SYMBOL(atomic64_dec_if_positive);
 
 long long atomic64_cmpxchg(atomic64_t *v, long long o, long long n)
 {
@@ -134,6 +142,7 @@ long long atomic64_cmpxchg(atomic64_t *v, long long o, long long n)
 	spin_unlock_irqrestore(lock, flags);
 	return val;
 }
+EXPORT_SYMBOL(atomic64_cmpxchg);
 
 long long atomic64_xchg(atomic64_t *v, long long new)
 {
@@ -147,6 +156,7 @@ long long atomic64_xchg(atomic64_t *v, long long new)
 	spin_unlock_irqrestore(lock, flags);
 	return val;
 }
+EXPORT_SYMBOL(atomic64_xchg);
 
 int atomic64_add_unless(atomic64_t *v, long long a, long long u)
 {
@@ -162,6 +172,7 @@ int atomic64_add_unless(atomic64_t *v, long long a, long long u)
 	spin_unlock_irqrestore(lock, flags);
 	return ret;
 }
+EXPORT_SYMBOL(atomic64_add_unless);
 
 static int init_atomic64_lock(void)
 {
diff --git a/lib/dynamic_debug.c b/lib/dynamic_debug.c
index 833139c..e22c148 100644
--- a/lib/dynamic_debug.c
+++ b/lib/dynamic_debug.c
@@ -164,7 +164,7 @@ static void ddebug_change(const struct ddebug_query *query,
 
 			if (!newflags)
 				dt->num_enabled--;
-			else if (!dp-flags)
+			else if (!dp->flags)
 				dt->num_enabled++;
 			dp->flags = newflags;
 			if (newflags) {
diff --git a/lib/flex_array.c b/lib/flex_array.c
new file mode 100644
index 0000000..0e7894c
--- /dev/null
+++ b/lib/flex_array.c
@@ -0,0 +1,269 @@
+/*
+ * Flexible array managed in PAGE_SIZE parts
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright IBM Corporation, 2009
+ *
+ * Author: Dave Hansen <dave@linux.vnet.ibm.com>
+ */
+
+#include <linux/flex_array.h>
+#include <linux/slab.h>
+#include <linux/stddef.h>
+
+struct flex_array_part {
+	char elements[FLEX_ARRAY_PART_SIZE];
+};
+
+static inline int __elements_per_part(int element_size)
+{
+	return FLEX_ARRAY_PART_SIZE / element_size;
+}
+
+static inline int bytes_left_in_base(void)
+{
+	int element_offset = offsetof(struct flex_array, parts);
+	int bytes_left = FLEX_ARRAY_BASE_SIZE - element_offset;
+	return bytes_left;
+}
+
+static inline int nr_base_part_ptrs(void)
+{
+	return bytes_left_in_base() / sizeof(struct flex_array_part *);
+}
+
+/*
+ * If a user requests an allocation which is small
+ * enough, we may simply use the space in the
+ * flex_array->parts[] array to store the user
+ * data.
+ */
+static inline int elements_fit_in_base(struct flex_array *fa)
+{
+	int data_size = fa->element_size * fa->total_nr_elements;
+	if (data_size <= bytes_left_in_base())
+		return 1;
+	return 0;
+}
+
+/**
+ * flex_array_alloc - allocate a new flexible array
+ * @element_size:	the size of individual elements in the array
+ * @total:		total number of elements that this should hold
+ *
+ * Note: all locking must be provided by the caller.
+ *
+ * @total is used to size internal structures.  If the user ever
+ * accesses any array indexes >=@total, it will produce errors.
+ *
+ * The maximum number of elements is defined as: the number of
+ * elements that can be stored in a page times the number of
+ * page pointers that we can fit in the base structure or (using
+ * integer math):
+ *
+ * 	(PAGE_SIZE/element_size) * (PAGE_SIZE-8)/sizeof(void *)
+ *
+ * Here's a table showing example capacities.  Note that the maximum
+ * index that the get/put() functions is just nr_objects-1.   This
+ * basically means that you get 4MB of storage on 32-bit and 2MB on
+ * 64-bit.
+ *
+ *
+ * Element size | Objects | Objects |
+ * PAGE_SIZE=4k |  32-bit |  64-bit |
+ * ---------------------------------|
+ *      1 bytes | 4186112 | 2093056 |
+ *      2 bytes | 2093056 | 1046528 |
+ *      3 bytes | 1395030 |  697515 |
+ *      4 bytes | 1046528 |  523264 |
+ *     32 bytes |  130816 |   65408 |
+ *     33 bytes |  126728 |   63364 |
+ *   2048 bytes |    2044 |    1022 |
+ *   2049 bytes |    1022 |     511 |
+ *       void * | 1046528 |  261632 |
+ *
+ * Since 64-bit pointers are twice the size, we lose half the
+ * capacity in the base structure.  Also note that no effort is made
+ * to efficiently pack objects across page boundaries.
+ */
+struct flex_array *flex_array_alloc(int element_size, int total, gfp_t flags)
+{
+	struct flex_array *ret;
+	int max_size = nr_base_part_ptrs() * __elements_per_part(element_size);
+
+	/* max_size will end up 0 if element_size > PAGE_SIZE */
+	if (total > max_size)
+		return NULL;
+	ret = kzalloc(sizeof(struct flex_array), flags);
+	if (!ret)
+		return NULL;
+	ret->element_size = element_size;
+	ret->total_nr_elements = total;
+	return ret;
+}
+
+static int fa_element_to_part_nr(struct flex_array *fa, int element_nr)
+{
+	return element_nr / __elements_per_part(fa->element_size);
+}
+
+/**
+ * flex_array_free_parts - just free the second-level pages
+ * @src:	address of data to copy into the array
+ * @element_nr:	index of the position in which to insert
+ * 		the new element.
+ *
+ * This is to be used in cases where the base 'struct flex_array'
+ * has been statically allocated and should not be free.
+ */
+void flex_array_free_parts(struct flex_array *fa)
+{
+	int part_nr;
+	int max_part = nr_base_part_ptrs();
+
+	if (elements_fit_in_base(fa))
+		return;
+	for (part_nr = 0; part_nr < max_part; part_nr++)
+		kfree(fa->parts[part_nr]);
+}
+
+void flex_array_free(struct flex_array *fa)
+{
+	flex_array_free_parts(fa);
+	kfree(fa);
+}
+
+static int fa_index_inside_part(struct flex_array *fa, int element_nr)
+{
+	return element_nr % __elements_per_part(fa->element_size);
+}
+
+static int index_inside_part(struct flex_array *fa, int element_nr)
+{
+	int part_offset = fa_index_inside_part(fa, element_nr);
+	return part_offset * fa->element_size;
+}
+
+static struct flex_array_part *
+__fa_get_part(struct flex_array *fa, int part_nr, gfp_t flags)
+{
+	struct flex_array_part *part = fa->parts[part_nr];
+	if (!part) {
+		/*
+		 * This leaves the part pages uninitialized
+		 * and with potentially random data, just
+		 * as if the user had kmalloc()'d the whole.
+		 * __GFP_ZERO can be used to zero it.
+		 */
+		part = kmalloc(FLEX_ARRAY_PART_SIZE, flags);
+		if (!part)
+			return NULL;
+		fa->parts[part_nr] = part;
+	}
+	return part;
+}
+
+/**
+ * flex_array_put - copy data into the array at @element_nr
+ * @src:	address of data to copy into the array
+ * @element_nr:	index of the position in which to insert
+ * 		the new element.
+ *
+ * Note that this *copies* the contents of @src into
+ * the array.  If you are trying to store an array of
+ * pointers, make sure to pass in &ptr instead of ptr.
+ *
+ * Locking must be provided by the caller.
+ */
+int flex_array_put(struct flex_array *fa, int element_nr, void *src, gfp_t flags)
+{
+	int part_nr = fa_element_to_part_nr(fa, element_nr);
+	struct flex_array_part *part;
+	void *dst;
+
+	if (element_nr >= fa->total_nr_elements)
+		return -ENOSPC;
+	if (elements_fit_in_base(fa))
+		part = (struct flex_array_part *)&fa->parts[0];
+	else
+		part = __fa_get_part(fa, part_nr, flags);
+	if (!part)
+		return -ENOMEM;
+	dst = &part->elements[index_inside_part(fa, element_nr)];
+	memcpy(dst, src, fa->element_size);
+	return 0;
+}
+
+/**
+ * flex_array_prealloc - guarantee that array space exists
+ * @start:	index of first array element for which space is allocated
+ * @end:	index of last (inclusive) element for which space is allocated
+ *
+ * This will guarantee that no future calls to flex_array_put()
+ * will allocate memory.  It can be used if you are expecting to
+ * be holding a lock or in some atomic context while writing
+ * data into the array.
+ *
+ * Locking must be provided by the caller.
+ */
+int flex_array_prealloc(struct flex_array *fa, int start, int end, gfp_t flags)
+{
+	int start_part;
+	int end_part;
+	int part_nr;
+	struct flex_array_part *part;
+
+	if (start >= fa->total_nr_elements || end >= fa->total_nr_elements)
+		return -ENOSPC;
+	if (elements_fit_in_base(fa))
+		return 0;
+	start_part = fa_element_to_part_nr(fa, start);
+	end_part = fa_element_to_part_nr(fa, end);
+	for (part_nr = start_part; part_nr <= end_part; part_nr++) {
+		part = __fa_get_part(fa, part_nr, flags);
+		if (!part)
+			return -ENOMEM;
+	}
+	return 0;
+}
+
+/**
+ * flex_array_get - pull data back out of the array
+ * @element_nr:	index of the element to fetch from the array
+ *
+ * Returns a pointer to the data at index @element_nr.  Note
+ * that this is a copy of the data that was passed in.  If you
+ * are using this to store pointers, you'll get back &ptr.
+ *
+ * Locking must be provided by the caller.
+ */
+void *flex_array_get(struct flex_array *fa, int element_nr)
+{
+	int part_nr = fa_element_to_part_nr(fa, element_nr);
+	struct flex_array_part *part;
+	int index;
+
+	if (element_nr >= fa->total_nr_elements)
+		return NULL;
+	if (!fa->parts[part_nr])
+		return NULL;
+	if (elements_fit_in_base(fa))
+		part = (struct flex_array_part *)&fa->parts[0];
+	else
+		part = fa->parts[part_nr];
+	index = index_inside_part(fa, element_nr);
+	return &part->elements[index_inside_part(fa, element_nr)];
+}
diff --git a/lib/scatterlist.c b/lib/scatterlist.c
index a295e40..0d475d8 100644
--- a/lib/scatterlist.c
+++ b/lib/scatterlist.c
@@ -314,6 +314,7 @@ void sg_miter_start(struct sg_mapping_iter *miter, struct scatterlist *sgl,
 	miter->__sg = sgl;
 	miter->__nents = nents;
 	miter->__offset = 0;
+	WARN_ON(!(flags & (SG_MITER_TO_SG | SG_MITER_FROM_SG)));
 	miter->__flags = flags;
 }
 EXPORT_SYMBOL(sg_miter_start);
@@ -394,6 +395,9 @@ void sg_miter_stop(struct sg_mapping_iter *miter)
 	if (miter->addr) {
 		miter->__offset += miter->consumed;
 
+		if (miter->__flags & SG_MITER_TO_SG)
+			flush_kernel_dcache_page(miter->page);
+
 		if (miter->__flags & SG_MITER_ATOMIC) {
 			WARN_ON(!irqs_disabled());
 			kunmap_atomic(miter->addr, KM_BIO_SRC_IRQ);
@@ -426,8 +430,14 @@ static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents,
 	unsigned int offset = 0;
 	struct sg_mapping_iter miter;
 	unsigned long flags;
+	unsigned int sg_flags = SG_MITER_ATOMIC;
+
+	if (to_buffer)
+		sg_flags |= SG_MITER_FROM_SG;
+	else
+		sg_flags |= SG_MITER_TO_SG;
 
-	sg_miter_start(&miter, sgl, nents, SG_MITER_ATOMIC);
+	sg_miter_start(&miter, sgl, nents, sg_flags);
 
 	local_irq_save(flags);
 
@@ -438,10 +448,8 @@ static size_t sg_copy_buffer(struct scatterlist *sgl, unsigned int nents,
 
 		if (to_buffer)
 			memcpy(buf + offset, miter.addr, len);
-		else {
+		else
 			memcpy(miter.addr, buf + offset, len);
-			flush_kernel_dcache_page(miter.page);
-		}
 
 		offset += len;
 	}
diff --git a/mm/hugetlb.c b/mm/hugetlb.c
index d0351e3..cafdcee 100644
--- a/mm/hugetlb.c
+++ b/mm/hugetlb.c
@@ -2370,7 +2370,7 @@ void hugetlb_unreserve_pages(struct inode *inode, long offset, long freed)
 	long chg = region_truncate(&inode->i_mapping->private_list, offset);
 
 	spin_lock(&inode->i_lock);
-	inode->i_blocks -= blocks_per_huge_page(h);
+	inode->i_blocks -= (blocks_per_huge_page(h) * freed);
 	spin_unlock(&inode->i_lock);
 
 	hugetlb_put_quota(inode->i_mapping, (chg - freed));
diff --git a/mm/kmemleak.c b/mm/kmemleak.c
index 5aabd41..4872673 100644
--- a/mm/kmemleak.c
+++ b/mm/kmemleak.c
@@ -1217,7 +1217,6 @@ static void *kmemleak_seq_start(struct seq_file *seq, loff_t *pos)
 	}
 	object = NULL;
 out:
-	rcu_read_unlock();
 	return object;
 }
 
@@ -1233,13 +1232,11 @@ static void *kmemleak_seq_next(struct seq_file *seq, void *v, loff_t *pos)
 
 	++(*pos);
 
-	rcu_read_lock();
 	list_for_each_continue_rcu(n, &object_list) {
 		next_obj = list_entry(n, struct kmemleak_object, object_list);
 		if (get_object(next_obj))
 			break;
 	}
-	rcu_read_unlock();
 
 	put_object(prev_obj);
 	return next_obj;
@@ -1255,6 +1252,7 @@ static void kmemleak_seq_stop(struct seq_file *seq, void *v)
 		 * kmemleak_seq_start may return ERR_PTR if the scan_mutex
 		 * waiting was interrupted, so only release it if !IS_ERR.
 		 */
+		rcu_read_unlock();
 		mutex_unlock(&scan_mutex);
 		if (v)
 			put_object(v);
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index e717964..fd4529d 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1207,6 +1207,12 @@ static int mem_cgroup_move_account(struct page_cgroup *pc,
 	ret = 0;
 out:
 	unlock_page_cgroup(pc);
+	/*
+	 * We charges against "to" which may not have any tasks. Then, "to"
+	 * can be under rmdir(). But in current implementation, caller of
+	 * this function is just force_empty() and it's garanteed that
+	 * "to" is never removed. So, we don't check rmdir status here.
+	 */
 	return ret;
 }
 
@@ -1428,6 +1434,7 @@ __mem_cgroup_commit_charge_swapin(struct page *page, struct mem_cgroup *ptr,
 		return;
 	if (!ptr)
 		return;
+	cgroup_exclude_rmdir(&ptr->css);
 	pc = lookup_page_cgroup(page);
 	mem_cgroup_lru_del_before_commit_swapcache(page);
 	__mem_cgroup_commit_charge(ptr, pc, ctype);
@@ -1457,8 +1464,12 @@ __mem_cgroup_commit_charge_swapin(struct page *page, struct mem_cgroup *ptr,
 		}
 		rcu_read_unlock();
 	}
-	/* add this page(page_cgroup) to the LRU we want. */
-
+	/*
+	 * At swapin, we may charge account against cgroup which has no tasks.
+	 * So, rmdir()->pre_destroy() can be called while we do this charge.
+	 * In that case, we need to call pre_destroy() again. check it here.
+	 */
+	cgroup_release_and_wakeup_rmdir(&ptr->css);
 }
 
 void mem_cgroup_commit_charge_swapin(struct page *page, struct mem_cgroup *ptr)
@@ -1664,7 +1675,7 @@ void mem_cgroup_end_migration(struct mem_cgroup *mem,
 
 	if (!mem)
 		return;
-
+	cgroup_exclude_rmdir(&mem->css);
 	/* at migration success, oldpage->mapping is NULL. */
 	if (oldpage->mapping) {
 		target = oldpage;
@@ -1704,6 +1715,12 @@ void mem_cgroup_end_migration(struct mem_cgroup *mem,
 	 */
 	if (ctype == MEM_CGROUP_CHARGE_TYPE_MAPPED)
 		mem_cgroup_uncharge_page(target);
+	/*
+	 * At migration, we may charge account against cgroup which has no tasks
+	 * So, rmdir()->pre_destroy() can be called while we do this charge.
+	 * In that case, we need to call pre_destroy() again. check it here.
+	 */
+	cgroup_release_and_wakeup_rmdir(&mem->css);
 }
 
 /*
diff --git a/mm/memory.c b/mm/memory.c
index 6521619..aede2ce 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -135,11 +135,12 @@ void pmd_clear_bad(pmd_t *pmd)
  * Note: this doesn't free the actual pages themselves. That
  * has been handled earlier when unmapping all the memory regions.
  */
-static void free_pte_range(struct mmu_gather *tlb, pmd_t *pmd)
+static void free_pte_range(struct mmu_gather *tlb, pmd_t *pmd,
+			   unsigned long addr)
 {
 	pgtable_t token = pmd_pgtable(*pmd);
 	pmd_clear(pmd);
-	pte_free_tlb(tlb, token);
+	pte_free_tlb(tlb, token, addr);
 	tlb->mm->nr_ptes--;
 }
 
@@ -157,7 +158,7 @@ static inline void free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
 		next = pmd_addr_end(addr, end);
 		if (pmd_none_or_clear_bad(pmd))
 			continue;
-		free_pte_range(tlb, pmd);
+		free_pte_range(tlb, pmd, addr);
 	} while (pmd++, addr = next, addr != end);
 
 	start &= PUD_MASK;
@@ -173,7 +174,7 @@ static inline void free_pmd_range(struct mmu_gather *tlb, pud_t *pud,
 
 	pmd = pmd_offset(pud, start);
 	pud_clear(pud);
-	pmd_free_tlb(tlb, pmd);
+	pmd_free_tlb(tlb, pmd, start);
 }
 
 static inline void free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
@@ -206,7 +207,7 @@ static inline void free_pud_range(struct mmu_gather *tlb, pgd_t *pgd,
 
 	pud = pud_offset(pgd, start);
 	pgd_clear(pgd);
-	pud_free_tlb(tlb, pud);
+	pud_free_tlb(tlb, pud, start);
 }
 
 /*
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index caa9268..d052abb 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -882,7 +882,7 @@ retry_reserve:
  */
 static int rmqueue_bulk(struct zone *zone, unsigned int order, 
 			unsigned long count, struct list_head *list,
-			int migratetype)
+			int migratetype, int cold)
 {
 	int i;
 	
@@ -901,7 +901,10 @@ static int rmqueue_bulk(struct zone *zone, unsigned int order,
 		 * merge IO requests if the physical pages are ordered
 		 * properly.
 		 */
-		list_add(&page->lru, list);
+		if (likely(cold == 0))
+			list_add(&page->lru, list);
+		else
+			list_add_tail(&page->lru, list);
 		set_page_private(page, migratetype);
 		list = &page->lru;
 	}
@@ -1119,7 +1122,8 @@ again:
 		local_irq_save(flags);
 		if (!pcp->count) {
 			pcp->count = rmqueue_bulk(zone, 0,
-					pcp->batch, &pcp->list, migratetype);
+					pcp->batch, &pcp->list,
+					migratetype, cold);
 			if (unlikely(!pcp->count))
 				goto failed;
 		}
@@ -1138,7 +1142,8 @@ again:
 		/* Allocate more to the pcp list if necessary */
 		if (unlikely(&page->lru == &pcp->list)) {
 			pcp->count += rmqueue_bulk(zone, 0,
-					pcp->batch, &pcp->list, migratetype);
+					pcp->batch, &pcp->list,
+					migratetype, cold);
 			page = list_entry(pcp->list.next, struct page, lru);
 		}
 
@@ -1740,8 +1745,10 @@ __alloc_pages_slowpath(gfp_t gfp_mask, unsigned int order,
 	 * be using allocators in order of preference for an area that is
 	 * too large.
 	 */
-	if (WARN_ON_ONCE(order >= MAX_ORDER))
+	if (order >= MAX_ORDER) {
+		WARN_ON_ONCE(!(gfp_mask & __GFP_NOWARN));
 		return NULL;
+	}
 
 	/*
 	 * GFP_THISNODE (meaning __GFP_THISNODE, __GFP_NORETRY and
@@ -1789,6 +1796,10 @@ rebalance:
 	if (p->flags & PF_MEMALLOC)
 		goto nopage;
 
+	/* Avoid allocations with no watermarks from looping endlessly */
+	if (test_thread_flag(TIF_MEMDIE) && !(gfp_mask & __GFP_NOFAIL))
+		goto nopage;
+
 	/* Try direct reclaim and then allocating */
 	page = __alloc_pages_direct_reclaim(gfp_mask, order,
 					zonelist, high_zoneidx,
diff --git a/mm/swapfile.c b/mm/swapfile.c
index d1ade1a..8ffdc0d 100644
--- a/mm/swapfile.c
+++ b/mm/swapfile.c
@@ -753,7 +753,7 @@ int swap_type_of(dev_t device, sector_t offset, struct block_device **bdev_p)
 
 		if (!bdev) {
 			if (bdev_p)
-				*bdev_p = bdget(sis->bdev->bd_dev);
+				*bdev_p = bdgrab(sis->bdev);
 
 			spin_unlock(&swap_lock);
 			return i;
@@ -765,7 +765,7 @@ int swap_type_of(dev_t device, sector_t offset, struct block_device **bdev_p)
 					struct swap_extent, list);
 			if (se->start_block == offset) {
 				if (bdev_p)
-					*bdev_p = bdget(sis->bdev->bd_dev);
+					*bdev_p = bdgrab(sis->bdev);
 
 				spin_unlock(&swap_lock);
 				bdput(bdev);
diff --git a/net/bridge/br_if.c b/net/bridge/br_if.c
index 8a96672..eb404dc 100644
--- a/net/bridge/br_if.c
+++ b/net/bridge/br_if.c
@@ -424,7 +424,7 @@ int br_add_if(struct net_bridge *br, struct net_device *dev)
 err2:
 	br_fdb_delete_by_port(br, p, 1);
 err1:
-	kobject_del(&p->kobj);
+	kobject_put(&p->kobj);
 err0:
 	dev_set_promiscuity(dev, -1);
 put_back:
diff --git a/net/dccp/proto.c b/net/dccp/proto.c
index 94ca8ea..3281013 100644
--- a/net/dccp/proto.c
+++ b/net/dccp/proto.c
@@ -1066,7 +1066,7 @@ static int __init dccp_init(void)
 		       (dccp_hashinfo.ehash_size - 1))
 			dccp_hashinfo.ehash_size--;
 		dccp_hashinfo.ehash = (struct inet_ehash_bucket *)
-			__get_free_pages(GFP_ATOMIC, ehash_order);
+			__get_free_pages(GFP_ATOMIC|__GFP_NOWARN, ehash_order);
 	} while (!dccp_hashinfo.ehash && --ehash_order > 0);
 
 	if (!dccp_hashinfo.ehash) {
@@ -1091,7 +1091,7 @@ static int __init dccp_init(void)
 		    bhash_order > 0)
 			continue;
 		dccp_hashinfo.bhash = (struct inet_bind_hashbucket *)
-			__get_free_pages(GFP_ATOMIC, bhash_order);
+			__get_free_pages(GFP_ATOMIC|__GFP_NOWARN, bhash_order);
 	} while (!dccp_hashinfo.bhash && --bhash_order >= 0);
 
 	if (!dccp_hashinfo.bhash) {
diff --git a/net/irda/irttp.c b/net/irda/irttp.c
index ecf4eb2..9cb79f9 100644
--- a/net/irda/irttp.c
+++ b/net/irda/irttp.c
@@ -1453,6 +1453,7 @@ struct tsap_cb *irttp_dup(struct tsap_cb *orig, void *instance)
 	}
 	/* Dup */
 	memcpy(new, orig, sizeof(struct tsap_cb));
+	spin_lock_init(&new->lock);
 
 	/* We don't need the old instance any more */
 	spin_unlock_irqrestore(&irttp->tsaps->hb_spinlock, flags);
diff --git a/net/mac80211/Kconfig b/net/mac80211/Kconfig
index ba2643a..7836ee9 100644
--- a/net/mac80211/Kconfig
+++ b/net/mac80211/Kconfig
@@ -83,6 +83,7 @@ endmenu
 config MAC80211_MESH
 	bool "Enable mac80211 mesh networking (pre-802.11s) support"
 	depends on MAC80211 && EXPERIMENTAL
+	depends on BROKEN
 	---help---
 	 This options enables support of Draft 802.11s mesh networking.
 	 The implementation is based on Draft 1.08 of the Mesh Networking
diff --git a/net/mac80211/mesh_pathtbl.c b/net/mac80211/mesh_pathtbl.c
index 3c72557..479597e 100644
--- a/net/mac80211/mesh_pathtbl.c
+++ b/net/mac80211/mesh_pathtbl.c
@@ -175,6 +175,8 @@ int mesh_path_add(u8 *dst, struct ieee80211_sub_if_data *sdata)
 	int err = 0;
 	u32 hash_idx;
 
+	might_sleep();
+
 	if (memcmp(dst, sdata->dev->dev_addr, ETH_ALEN) == 0)
 		/* never add ourselves as neighbours */
 		return -ENOTSUPP;
@@ -265,6 +267,7 @@ int mpp_path_add(u8 *dst, u8 *mpp, struct ieee80211_sub_if_data *sdata)
 	int err = 0;
 	u32 hash_idx;
 
+	might_sleep();
 
 	if (memcmp(dst, sdata->dev->dev_addr, ETH_ALEN) == 0)
 		/* never add ourselves as neighbours */
@@ -491,8 +494,10 @@ void mesh_path_tx_pending(struct mesh_path *mpath)
  * @skb: frame to discard
  * @sdata: network subif the frame was to be sent through
  *
- * If the frame was beign forwarded from another MP, a PERR frame will be sent
- * to the precursor.
+ * If the frame was being forwarded from another MP, a PERR frame will be sent
+ * to the precursor.  The precursor's address (i.e. the previous hop) was saved
+ * in addr1 of the frame-to-be-forwarded, and would only be overwritten once
+ * the destination is successfully resolved.
  *
  * Locking: the function must me called within a rcu_read_lock region
  */
@@ -507,7 +512,7 @@ void mesh_path_discard_frame(struct sk_buff *skb,
 		u8 *ra, *da;
 
 		da = hdr->addr3;
-		ra = hdr->addr2;
+		ra = hdr->addr1;
 		mpath = mesh_path_lookup(da, sdata);
 		if (mpath)
 			dsn = ++mpath->dsn;
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index d238a89..3a8922c 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -1455,7 +1455,7 @@ int ieee80211_master_start_xmit(struct sk_buff *skb, struct net_device *dev)
 		monitor_iface = UNKNOWN_ADDRESS;
 
 		len_rthdr = ieee80211_get_radiotap_len(skb->data);
-		hdr = (struct ieee80211_hdr *)skb->data + len_rthdr;
+		hdr = (struct ieee80211_hdr *)(skb->data + len_rthdr);
 		hdrlen = ieee80211_hdrlen(hdr->frame_control);
 
 		/* check the header is complete in the frame */
diff --git a/net/rfkill/core.c b/net/rfkill/core.c
index 79693fe..2fc4a17 100644
--- a/net/rfkill/core.c
+++ b/net/rfkill/core.c
@@ -549,6 +549,10 @@ void rfkill_set_states(struct rfkill *rfkill, bool sw, bool hw)
 	swprev = !!(rfkill->state & RFKILL_BLOCK_SW);
 	hwprev = !!(rfkill->state & RFKILL_BLOCK_HW);
 	__rfkill_set_sw_state(rfkill, sw);
+	if (hw)
+		rfkill->state |= RFKILL_BLOCK_HW;
+	else
+		rfkill->state &= ~RFKILL_BLOCK_HW;
 
 	spin_unlock_irqrestore(&rfkill->lock, flags);
 
@@ -648,15 +652,26 @@ static ssize_t rfkill_state_store(struct device *dev,
 				  struct device_attribute *attr,
 				  const char *buf, size_t count)
 {
-	/*
-	 * The intention was that userspace can only take control over
-	 * a given device when/if rfkill-input doesn't control it due
-	 * to user_claim. Since user_claim is currently unsupported,
-	 * we never support changing the state from userspace -- this
-	 * can be implemented again later.
-	 */
+	struct rfkill *rfkill = to_rfkill(dev);
+	unsigned long state;
+	int err;
+
+	if (!capable(CAP_NET_ADMIN))
+		return -EPERM;
+
+	err = strict_strtoul(buf, 0, &state);
+	if (err)
+		return err;
+
+	if (state != RFKILL_USER_STATE_SOFT_BLOCKED &&
+	    state != RFKILL_USER_STATE_UNBLOCKED)
+		return -EINVAL;
+
+	mutex_lock(&rfkill_global_mutex);
+	rfkill_set_block(rfkill, state == RFKILL_USER_STATE_SOFT_BLOCKED);
+	mutex_unlock(&rfkill_global_mutex);
 
-	return -EPERM;
+	return err ?: count;
 }
 
 static ssize_t rfkill_claim_show(struct device *dev,
diff --git a/net/rose/af_rose.c b/net/rose/af_rose.c
index 6bd8e938..f0a76f6 100644
--- a/net/rose/af_rose.c
+++ b/net/rose/af_rose.c
@@ -92,23 +92,21 @@ static void rose_set_lockdep_key(struct net_device *dev)
 /*
  *	Convert a ROSE address into text.
  */
-const char *rose2asc(const rose_address *addr)
+char *rose2asc(char *buf, const rose_address *addr)
 {
-	static char buffer[11];
-
 	if (addr->rose_addr[0] == 0x00 && addr->rose_addr[1] == 0x00 &&
 	    addr->rose_addr[2] == 0x00 && addr->rose_addr[3] == 0x00 &&
 	    addr->rose_addr[4] == 0x00) {
-		strcpy(buffer, "*");
+		strcpy(buf, "*");
 	} else {
-		sprintf(buffer, "%02X%02X%02X%02X%02X", addr->rose_addr[0] & 0xFF,
+		sprintf(buf, "%02X%02X%02X%02X%02X", addr->rose_addr[0] & 0xFF,
 						addr->rose_addr[1] & 0xFF,
 						addr->rose_addr[2] & 0xFF,
 						addr->rose_addr[3] & 0xFF,
 						addr->rose_addr[4] & 0xFF);
 	}
 
-	return buffer;
+	return buf;
 }
 
 /*
@@ -1437,7 +1435,7 @@ static void rose_info_stop(struct seq_file *seq, void *v)
 
 static int rose_info_show(struct seq_file *seq, void *v)
 {
-	char buf[11];
+	char buf[11], rsbuf[11];
 
 	if (v == SEQ_START_TOKEN)
 		seq_puts(seq,
@@ -1455,8 +1453,8 @@ static int rose_info_show(struct seq_file *seq, void *v)
 			devname = dev->name;
 
 		seq_printf(seq, "%-10s %-9s ",
-			rose2asc(&rose->dest_addr),
-			ax2asc(buf, &rose->dest_call));
+			   rose2asc(rsbuf, &rose->dest_addr),
+			   ax2asc(buf, &rose->dest_call));
 
 		if (ax25cmp(&rose->source_call, &null_ax25_address) == 0)
 			callsign = "??????-?";
@@ -1465,7 +1463,7 @@ static int rose_info_show(struct seq_file *seq, void *v)
 
 		seq_printf(seq,
 			   "%-10s %-9s %-5s %3.3X %05d  %d  %d  %d  %d %3lu %3lu %3lu %3lu %3lu %3lu/%03lu %5d %5d %ld\n",
-			rose2asc(&rose->source_addr),
+			rose2asc(rsbuf, &rose->source_addr),
 			callsign,
 			devname,
 			rose->lci & 0x0FFF,
diff --git a/net/rose/rose_route.c b/net/rose/rose_route.c
index a81066a..9478d9b 100644
--- a/net/rose/rose_route.c
+++ b/net/rose/rose_route.c
@@ -1104,6 +1104,7 @@ static void rose_node_stop(struct seq_file *seq, void *v)
 
 static int rose_node_show(struct seq_file *seq, void *v)
 {
+	char rsbuf[11];
 	int i;
 
 	if (v == SEQ_START_TOKEN)
@@ -1112,13 +1113,13 @@ static int rose_node_show(struct seq_file *seq, void *v)
 		const struct rose_node *rose_node = v;
 		/* if (rose_node->loopback) {
 			seq_printf(seq, "%-10s %04d 1 loopback\n",
-				rose2asc(&rose_node->address),
-				rose_node->mask);
+				   rose2asc(rsbuf, &rose_node->address),
+				   rose_node->mask);
 		} else { */
 			seq_printf(seq, "%-10s %04d %d",
-				rose2asc(&rose_node->address),
-				rose_node->mask,
-				rose_node->count);
+				   rose2asc(rsbuf, &rose_node->address),
+				   rose_node->mask,
+				   rose_node->count);
 
 			for (i = 0; i < rose_node->count; i++)
 				seq_printf(seq, " %05d",
@@ -1267,7 +1268,7 @@ static void rose_route_stop(struct seq_file *seq, void *v)
 
 static int rose_route_show(struct seq_file *seq, void *v)
 {
-	char buf[11];
+	char buf[11], rsbuf[11];
 
 	if (v == SEQ_START_TOKEN)
 		seq_puts(seq,
@@ -1279,7 +1280,7 @@ static int rose_route_show(struct seq_file *seq, void *v)
 			seq_printf(seq,
 				   "%3.3X  %-10s  %-9s  %05d      ",
 				   rose_route->lci1,
-				   rose2asc(&rose_route->src_addr),
+				   rose2asc(rsbuf, &rose_route->src_addr),
 				   ax2asc(buf, &rose_route->src_call),
 				   rose_route->neigh1->number);
 		else
@@ -1289,10 +1290,10 @@ static int rose_route_show(struct seq_file *seq, void *v)
 		if (rose_route->neigh2)
 			seq_printf(seq,
 				   "%3.3X  %-10s  %-9s  %05d\n",
-				rose_route->lci2,
-				rose2asc(&rose_route->dest_addr),
-				ax2asc(buf, &rose_route->dest_call),
-				rose_route->neigh2->number);
+				   rose_route->lci2,
+				   rose2asc(rsbuf, &rose_route->dest_addr),
+				   ax2asc(buf, &rose_route->dest_call),
+				   rose_route->neigh2->number);
 		 else
 			 seq_puts(seq,
 				  "000  *           *          00000\n");
diff --git a/net/wireless/nl80211.c b/net/wireless/nl80211.c
index 43bdb13..634496b 100644
--- a/net/wireless/nl80211.c
+++ b/net/wireless/nl80211.c
@@ -997,7 +997,7 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info)
 
 	if (IS_ERR(hdr)) {
 		err = PTR_ERR(hdr);
-		goto out;
+		goto free_msg;
 	}
 
 	cookie.msg = msg;
@@ -1011,7 +1011,7 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info)
 				&cookie, get_key_callback);
 
 	if (err)
-		goto out;
+		goto free_msg;
 
 	if (cookie.error)
 		goto nla_put_failure;
@@ -1022,6 +1022,7 @@ static int nl80211_get_key(struct sk_buff *skb, struct genl_info *info)
 
  nla_put_failure:
 	err = -ENOBUFS;
+ free_msg:
 	nlmsg_free(msg);
  out:
 	cfg80211_put_dev(drv);
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index f8e71b3..9271118 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -35,8 +35,6 @@ void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted)
 	else
 		nl80211_send_scan_done(wiphy_to_dev(request->wiphy), dev);
 
-	wiphy_to_dev(request->wiphy)->scan_req = NULL;
-
 #ifdef CONFIG_WIRELESS_EXT
 	if (!aborted) {
 		memset(&wrqu, 0, sizeof(wrqu));
@@ -48,6 +46,7 @@ void cfg80211_scan_done(struct cfg80211_scan_request *request, bool aborted)
 	dev_put(dev);
 
  out:
+	wiphy_to_dev(request->wiphy)->scan_req = NULL;
 	kfree(request);
 }
 EXPORT_SYMBOL(cfg80211_scan_done);
diff --git a/scripts/get_maintainer.pl b/scripts/get_maintainer.pl
index 3e73314..278a45b 100755
--- a/scripts/get_maintainer.pl
+++ b/scripts/get_maintainer.pl
@@ -13,7 +13,7 @@
 use strict;
 
 my $P = $0;
-my $V = '0.16';
+my $V = '0.17';
 
 use Getopt::Long qw(:config no_auto_abbrev);
 
@@ -27,6 +27,7 @@ my $email_git = 1;
 my $email_git_penguin_chiefs = 0;
 my $email_git_min_signatures = 1;
 my $email_git_max_maintainers = 5;
+my $email_git_min_percent = 5;
 my $email_git_since = "1-year-ago";
 my $output_multiline = 1;
 my $output_separator = ", ";
@@ -65,6 +66,7 @@ if (!GetOptions(
 		'git-chief-penguins!' => \$email_git_penguin_chiefs,
 		'git-min-signatures=i' => \$email_git_min_signatures,
 		'git-max-maintainers=i' => \$email_git_max_maintainers,
+		'git-min-percent=i' => \$email_git_min_percent,
 		'git-since=s' => \$email_git_since,
 		'm!' => \$email_maintainer,
 		'n!' => \$email_usename,
@@ -132,6 +134,10 @@ while (<MAINT>) {
 	    $value =~ s@\.@\\\.@g;       ##Convert . to \.
 	    $value =~ s/\*/\.\*/g;       ##Convert * to .*
 	    $value =~ s/\?/\./g;         ##Convert ? to .
+	    ##if pattern is a directory and it lacks a trailing slash, add one
+	    if ((-d $value)) {
+		$value =~ s@([^/])$@$1/@;
+	    }
 	}
 	push(@typevalue, "$type:$value");
     } elsif (!/^(\s)*$/) {
@@ -146,8 +152,10 @@ close(MAINT);
 my @files = ();
 
 foreach my $file (@ARGV) {
-    next if ((-d $file));
-    if (!(-f $file)) {
+    ##if $file is a directory and it lacks a trailing slash, add one
+    if ((-d $file)) {
+	$file =~ s@([^/])$@$1/@;
+    } elsif (!(-f $file)) {
 	die "$P: file '${file}' not found\n";
     }
     if ($from_filename) {
@@ -292,7 +300,7 @@ sub file_match_pattern {
 sub usage {
     print <<EOT;
 usage: $P [options] patchfile
-       $P [options] -f file
+       $P [options] -f file|directory
 version: $V
 
 MAINTAINER field selection options:
@@ -301,6 +309,7 @@ MAINTAINER field selection options:
     --git-chief-penguins => include ${penguin_chiefs}
     --git-min-signatures => number of signatures required (default: 1)
     --git-max-maintainers => maximum maintainers to add (default: 5)
+    --git-min-percent => minimum percentage of commits required (default: 5)
     --git-since => git history to use (default: 1-year-ago)
     --m => include maintainer(s) if any
     --n => include name 'Full Name <addr\@domain.tld>'
@@ -322,6 +331,15 @@ Other options:
   --version => show version
   --help => show this help information
 
+Notes:
+  Using "-f directory" may give unexpected results:
+
+  Used with "--git", git signators for _all_ files in and below
+     directory are examined as git recurses directories.
+     Any specified X: (exclude) pattern matches are _not_ ignored.
+  Used with "--nogit", directory is used as a pattern match,
+     no individual file within the directory or subdirectory
+     is matched.
 EOT
 }
 
@@ -482,6 +500,7 @@ sub recent_git_signoffs {
     my $output = "";
     my $count = 0;
     my @lines = ();
+    my $total_sign_offs;
 
     if (which("git") eq "") {
 	warn("$P: git not found.  Add --nogit to options?\n");
@@ -505,17 +524,26 @@ sub recent_git_signoffs {
     $output =~ s/^\s*//gm;
 
     @lines = split("\n", $output);
+
+    $total_sign_offs = 0;
+    foreach my $line (@lines) {
+	if ($line =~ m/([0-9]+)\s+(.*)/) {
+	    $total_sign_offs += $1;
+	} else {
+	    die("$P: Unexpected git output: ${line}\n");
+	}
+    }
+
     foreach my $line (@lines) {
 	if ($line =~ m/([0-9]+)\s+(.*)/) {
 	    my $sign_offs = $1;
 	    $line = $2;
 	    $count++;
 	    if ($sign_offs < $email_git_min_signatures ||
-	        $count > $email_git_max_maintainers) {
+	        $count > $email_git_max_maintainers ||
+		$sign_offs * 100 / $total_sign_offs < $email_git_min_percent) {
 		last;
 	    }
-	} else {
-	    die("$P: Unexpected git output: ${line}\n");
 	}
 	if ($line =~ m/(.+)<(.+)>/) {
 	    my $git_name = $1;
diff --git a/scripts/markup_oops.pl b/scripts/markup_oops.pl
index 528492b..8977401 100644
--- a/scripts/markup_oops.pl
+++ b/scripts/markup_oops.pl
@@ -1,6 +1,7 @@
 #!/usr/bin/perl
 
 use File::Basename;
+use Math::BigInt;
 
 # Copyright 2008, Intel Corporation
 #
@@ -172,8 +173,8 @@ while (<STDIN>) {
 	parse_x86_regs($line);
 }
 
-my $decodestart = hex($target) - hex($func_offset);
-my $decodestop = hex($target) + 8192;
+my $decodestart = Math::BigInt->from_hex("0x$target") - Math::BigInt->from_hex("0x$func_offset");
+my $decodestop = Math::BigInt->from_hex("0x$target") + 8192;
 if ($target eq "0") {
 	print "No oops found!\n";
 	print "Usage: \n";
diff --git a/sound/aoa/core/gpio-pmf.c b/sound/aoa/core/gpio-pmf.c
index 5ca2220..1dd0c28 100644
--- a/sound/aoa/core/gpio-pmf.c
+++ b/sound/aoa/core/gpio-pmf.c
@@ -182,6 +182,10 @@ static int pmf_set_notify(struct gpio_runtime *rt,
 	if (!old && notify) {
 		irq_client = kzalloc(sizeof(struct pmf_irq_client),
 				     GFP_KERNEL);
+		if (!irq_client) {
+			err = -ENOMEM;
+			goto out_unlock;
+		}
 		irq_client->data = notif;
 		irq_client->handler = pmf_handle_notify_irq;
 		irq_client->owner = THIS_MODULE;
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index 333e4dd..72cfd47 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -233,6 +233,18 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream)
 		xrun(substream);
 		return -EPIPE;
 	}
+	if (xrun_debug(substream, 8)) {
+		char name[16];
+		pcm_debug_name(substream, name, sizeof(name));
+		snd_printd("period_update: %s: pos=0x%x/0x%x/0x%x, "
+			   "hwptr=0x%lx, hw_base=0x%lx, hw_intr=0x%lx\n",
+			   name, (unsigned int)pos,
+			   (unsigned int)runtime->period_size,
+			   (unsigned int)runtime->buffer_size,
+			   (unsigned long)old_hw_ptr,
+			   (unsigned long)runtime->hw_ptr_base,
+			   (unsigned long)runtime->hw_ptr_interrupt);
+	}
 	hw_base = runtime->hw_ptr_base;
 	new_hw_ptr = hw_base + pos;
 	hw_ptr_interrupt = runtime->hw_ptr_interrupt + runtime->period_size;
@@ -244,18 +256,27 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream)
 			delta = new_hw_ptr - hw_ptr_interrupt;
 	}
 	if (delta < 0) {
-		delta += runtime->buffer_size;
+		if (runtime->periods == 1 || new_hw_ptr < old_hw_ptr)
+			delta += runtime->buffer_size;
 		if (delta < 0) {
 			hw_ptr_error(substream, 
 				     "Unexpected hw_pointer value "
 				     "(stream=%i, pos=%ld, intr_ptr=%ld)\n",
 				     substream->stream, (long)pos,
 				     (long)hw_ptr_interrupt);
+#if 1
+			/* simply skipping the hwptr update seems more
+			 * robust in some cases, e.g. on VMware with
+			 * inaccurate timer source
+			 */
+			return 0; /* skip this update */
+#else
 			/* rebase to interrupt position */
 			hw_base = new_hw_ptr = hw_ptr_interrupt;
 			/* align hw_base to buffer_size */
 			hw_base -= hw_base % runtime->buffer_size;
 			delta = 0;
+#endif
 		} else {
 			hw_base += runtime->buffer_size;
 			if (hw_base >= runtime->boundary)
@@ -344,6 +365,19 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream)
 		xrun(substream);
 		return -EPIPE;
 	}
+	if (xrun_debug(substream, 16)) {
+		char name[16];
+		pcm_debug_name(substream, name, sizeof(name));
+		snd_printd("hw_update: %s: pos=0x%x/0x%x/0x%x, "
+			   "hwptr=0x%lx, hw_base=0x%lx, hw_intr=0x%lx\n",
+			   name, (unsigned int)pos,
+			   (unsigned int)runtime->period_size,
+			   (unsigned int)runtime->buffer_size,
+			   (unsigned long)old_hw_ptr,
+			   (unsigned long)runtime->hw_ptr_base,
+			   (unsigned long)runtime->hw_ptr_interrupt);
+	}
+
 	hw_base = runtime->hw_ptr_base;
 	new_hw_ptr = hw_base + pos;
 
diff --git a/sound/oss/aedsp16.c b/sound/oss/aedsp16.c
index 3ee9900..35b5912 100644
--- a/sound/oss/aedsp16.c
+++ b/sound/oss/aedsp16.c
@@ -325,8 +325,9 @@
 /*
  * Size of character arrays that store name and version of sound card
  */
-#define CARDNAMELEN 15		/* Size of the card's name in chars     */
-#define CARDVERLEN  2		/* Size of the card's version in chars  */
+#define CARDNAMELEN	15	/* Size of the card's name in chars     */
+#define CARDVERLEN	10	/* Size of the card's version in chars	*/
+#define CARDVERDIGITS	2	/* Number of digits in the version	*/
 
 #if defined(CONFIG_SC6600)
 /*
@@ -410,7 +411,7 @@
 
 static int      soft_cfg __initdata = 0;	/* bitmapped config */
 static int      soft_cfg_mss __initdata = 0;	/* bitmapped mss config */
-static int      ver[CARDVERLEN] __initdata = {0, 0};	/* DSP Ver:
+static int      ver[CARDVERDIGITS] __initdata = {0, 0};	/* DSP Ver:
 						   hi->ver[0] lo->ver[1] */
 
 #if defined(CONFIG_SC6600)
@@ -957,7 +958,7 @@ static int __init aedsp16_dsp_version(int port)
 	 * string is finished.
 	 */
 		ver[len++] = ret;
-	  } while (len < CARDVERLEN);
+	  } while (len < CARDVERDIGITS);
 	sprintf(DSPVersion, "%d.%d", ver[0], ver[1]);
 
 	DBG(("success.\n"));
diff --git a/sound/oss/mpu401.c b/sound/oss/mpu401.c
index 1b2316f..734b8f9 100644
--- a/sound/oss/mpu401.c
+++ b/sound/oss/mpu401.c
@@ -1074,7 +1074,7 @@ int attach_mpu401(struct address_info *hw_config, struct module *owner)
 			sprintf(mpu_synth_info[m].name, "%s (MPU401)", hw_config->name);
 		else
 			sprintf(mpu_synth_info[m].name,
-				"MPU-401 %d.%d%c Midi interface #%d",
+				"MPU-401 %d.%d%c MIDI #%d",
 				(int) (devc->version & 0xf0) >> 4,
 				devc->version & 0x0f,
 				revision_char,
diff --git a/sound/pci/ctxfi/ctamixer.c b/sound/pci/ctxfi/ctamixer.c
index a1db51b3..a7f4a67 100644
--- a/sound/pci/ctxfi/ctamixer.c
+++ b/sound/pci/ctxfi/ctamixer.c
@@ -242,13 +242,12 @@ static int get_amixer_rsc(struct amixer_mgr *mgr,
 
 	/* Allocate mem for amixer resource */
 	amixer = kzalloc(sizeof(*amixer), GFP_KERNEL);
-	if (NULL == amixer) {
-		err = -ENOMEM;
-		return err;
-	}
+	if (!amixer)
+		return -ENOMEM;
 
 	/* Check whether there are sufficient
 	 * amixer resources to meet request. */
+	err = 0;
 	spin_lock_irqsave(&mgr->mgr_lock, flags);
 	for (i = 0; i < desc->msr; i++) {
 		err = mgr_get_resource(&mgr->mgr, 1, &idx);
@@ -397,12 +396,11 @@ static int get_sum_rsc(struct sum_mgr *mgr,
 
 	/* Allocate mem for sum resource */
 	sum = kzalloc(sizeof(*sum), GFP_KERNEL);
-	if (NULL == sum) {
-		err = -ENOMEM;
-		return err;
-	}
+	if (!sum)
+		return -ENOMEM;
 
 	/* Check whether there are sufficient sum resources to meet request. */
+	err = 0;
 	spin_lock_irqsave(&mgr->mgr_lock, flags);
 	for (i = 0; i < desc->msr; i++) {
 		err = mgr_get_resource(&mgr->mgr, 1, &idx);
diff --git a/sound/pci/ctxfi/ctsrc.c b/sound/pci/ctxfi/ctsrc.c
index e1c145d..df43a5c 100644
--- a/sound/pci/ctxfi/ctsrc.c
+++ b/sound/pci/ctxfi/ctsrc.c
@@ -724,12 +724,11 @@ static int get_srcimp_rsc(struct srcimp_mgr *mgr,
 
 	/* Allocate mem for SRCIMP resource */
 	srcimp = kzalloc(sizeof(*srcimp), GFP_KERNEL);
-	if (NULL == srcimp) {
-		err = -ENOMEM;
-		return err;
-	}
+	if (!srcimp)
+		return -ENOMEM;
 
 	/* Check whether there are sufficient SRCIMP resources. */
+	err = 0;
 	spin_lock_irqsave(&mgr->mgr_lock, flags);
 	for (i = 0; i < desc->msr; i++) {
 		err = mgr_get_resource(&mgr->mgr, 1, &idx);
diff --git a/sound/pci/hda/hda_eld.c b/sound/pci/hda/hda_eld.c
index fcad5ec..9446a5a 100644
--- a/sound/pci/hda/hda_eld.c
+++ b/sound/pci/hda/hda_eld.c
@@ -508,7 +508,7 @@ static void hdmi_write_eld_info(struct snd_info_entry *entry,
 	char name[64];
 	char *sname;
 	long long val;
-	int n;
+	unsigned int n;
 
 	while (!snd_info_get_line(buffer, line, sizeof(line))) {
 		if (sscanf(line, "%s %llx", name, &val) != 2)
@@ -539,7 +539,7 @@ static void hdmi_write_eld_info(struct snd_info_entry *entry,
 				sname++;
 				n = 10 * n + name[4] - '0';
 			}
-			if (n < 0 || n > 31) /* double the CEA limit */
+			if (n >= ELD_MAX_SAD)
 				continue;
 			if (!strcmp(sname, "_coding_type"))
 				e->sad[n].format = val;
diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c
index be7d25f..3da85ca 100644
--- a/sound/pci/hda/patch_analog.c
+++ b/sound/pci/hda/patch_analog.c
@@ -3754,7 +3754,7 @@ static int ad1884a_mobile_master_sw_put(struct snd_kcontrol *kcontrol,
 	int mute = (!ucontrol->value.integer.value[0] &&
 		    !ucontrol->value.integer.value[1]);
 	/* toggle GPIO1 according to the mute state */
-	snd_hda_codec_write(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA,
+	snd_hda_codec_write_cache(codec, 0x01, 0, AC_VERB_SET_GPIO_DATA,
 			    mute ? 0x02 : 0x0);
 	return ret;
 }
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 7e99763..b95df5d 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -275,13 +275,13 @@ struct alc_spec {
 						 */
 	unsigned int num_init_verbs;
 
-	char stream_name_analog[16];	/* analog PCM stream */
+	char stream_name_analog[32];	/* analog PCM stream */
 	struct hda_pcm_stream *stream_analog_playback;
 	struct hda_pcm_stream *stream_analog_capture;
 	struct hda_pcm_stream *stream_analog_alt_playback;
 	struct hda_pcm_stream *stream_analog_alt_capture;
 
-	char stream_name_digital[16];	/* digital PCM stream */
+	char stream_name_digital[32];	/* digital PCM stream */
 	struct hda_pcm_stream *stream_digital_playback;
 	struct hda_pcm_stream *stream_digital_capture;
 
@@ -10631,6 +10631,18 @@ static void alc262_lenovo_3000_unsol_event(struct hda_codec *codec,
 	alc262_lenovo_3000_automute(codec, 1);
 }
 
+static int amp_stereo_mute_update(struct hda_codec *codec, hda_nid_t nid,
+				  int dir, int idx, long *valp)
+{
+	int i, change = 0;
+
+	for (i = 0; i < 2; i++, valp++)
+		change |= snd_hda_codec_amp_update(codec, nid, i, dir, idx,
+						   HDA_AMP_MUTE,
+						   *valp ? 0 : HDA_AMP_MUTE);
+	return change;
+}
+
 /* bind hp and internal speaker mute (with plug check) */
 static int alc262_fujitsu_master_sw_put(struct snd_kcontrol *kcontrol,
 					 struct snd_ctl_elem_value *ucontrol)
@@ -10639,13 +10651,8 @@ static int alc262_fujitsu_master_sw_put(struct snd_kcontrol *kcontrol,
 	long *valp = ucontrol->value.integer.value;
 	int change;
 
-	change = snd_hda_codec_amp_stereo(codec, 0x14, HDA_OUTPUT, 0,
-						 HDA_AMP_MUTE,
-						 valp ? 0 : HDA_AMP_MUTE);
-	change |= snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0,
-						 HDA_AMP_MUTE,
-						 valp ? 0 : HDA_AMP_MUTE);
-
+	change = amp_stereo_mute_update(codec, 0x14, HDA_OUTPUT, 0, valp);
+	change |= amp_stereo_mute_update(codec, 0x1b, HDA_OUTPUT, 0, valp);
 	if (change)
 		alc262_fujitsu_automute(codec, 0);
 	return change;
@@ -10680,10 +10687,7 @@ static int alc262_lenovo_3000_master_sw_put(struct snd_kcontrol *kcontrol,
 	long *valp = ucontrol->value.integer.value;
 	int change;
 
-	change = snd_hda_codec_amp_stereo(codec, 0x1b, HDA_OUTPUT, 0,
-						 HDA_AMP_MUTE,
-						 valp ? 0 : HDA_AMP_MUTE);
-
+	change = amp_stereo_mute_update(codec, 0x1b, HDA_OUTPUT, 0, valp);
 	if (change)
 		alc262_lenovo_3000_automute(codec, 0);
 	return change;
@@ -11854,12 +11858,7 @@ static int alc268_acer_master_sw_put(struct snd_kcontrol *kcontrol,
 	long *valp = ucontrol->value.integer.value;
 	int change;
 
-	change = snd_hda_codec_amp_update(codec, 0x14, 0, HDA_OUTPUT, 0,
-					  HDA_AMP_MUTE,
-					  valp[0] ? 0 : HDA_AMP_MUTE);
-	change |= snd_hda_codec_amp_update(codec, 0x14, 1, HDA_OUTPUT, 0,
-					   HDA_AMP_MUTE,
-					   valp[1] ? 0 : HDA_AMP_MUTE);
+	change = amp_stereo_mute_update(codec, 0x14, HDA_OUTPUT, 0, valp);
 	if (change)
 		alc268_acer_automute(codec, 0);
 	return change;
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index da7f9f6..5383d8c 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -1809,6 +1809,8 @@ static struct snd_pci_quirk stac92hd73xx_cfg_tbl[] = {
 				"Dell Studio 1537", STAC_DELL_M6_DMIC),
 	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02a0,
 				"Dell Studio 17", STAC_DELL_M6_DMIC),
+	SND_PCI_QUIRK(PCI_VENDOR_ID_DELL, 0x02be,
+				"Dell Studio 1555", STAC_DELL_M6_DMIC),
 	{} /* terminator */
 };
 
@@ -4066,7 +4068,7 @@ static int stac92xx_add_jack(struct hda_codec *codec,
 	jack->nid = nid;
 	jack->type = type;
 
-	sprintf(name, "%s at %s %s Jack",
+	snprintf(name, sizeof(name), "%s at %s %s Jack",
 		snd_hda_get_jack_type(def_conf),
 		snd_hda_get_jack_connectivity(def_conf),
 		snd_hda_get_jack_location(def_conf));
diff --git a/sound/soc/codecs/tlv320aic3x.c b/sound/soc/codecs/tlv320aic3x.c
index ab099f4..cb0d1bf 100644
--- a/sound/soc/codecs/tlv320aic3x.c
+++ b/sound/soc/codecs/tlv320aic3x.c
@@ -767,6 +767,7 @@ static int aic3x_hw_params(struct snd_pcm_substream *substream,
 	int codec_clk = 0, bypass_pll = 0, fsref, last_clk = 0;
 	u8 data, r, p, pll_q, pll_p = 1, pll_r = 1, pll_j = 1;
 	u16 pll_d = 1;
+	u8 reg;
 
 	/* select data word length */
 	data =
@@ -801,8 +802,16 @@ static int aic3x_hw_params(struct snd_pcm_substream *substream,
 		pll_q &= 0xf;
 		aic3x_write(codec, AIC3X_PLL_PROGA_REG, pll_q << PLLQ_SHIFT);
 		aic3x_write(codec, AIC3X_GPIOB_REG, CODEC_CLKIN_CLKDIV);
-	} else
+		/* disable PLL if it is bypassed */
+		reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG);
+		aic3x_write(codec, AIC3X_PLL_PROGA_REG, reg & ~PLL_ENABLE);
+
+	} else {
 		aic3x_write(codec, AIC3X_GPIOB_REG, CODEC_CLKIN_PLLDIV);
+		/* enable PLL when it is used */
+		reg = aic3x_read_reg_cache(codec, AIC3X_PLL_PROGA_REG);
+		aic3x_write(codec, AIC3X_PLL_PROGA_REG, reg | PLL_ENABLE);
+	}
 
 	/* Route Left DAC to left channel input and
 	 * right DAC to right channel input */
diff --git a/sound/usb/Kconfig b/sound/usb/Kconfig
index 523aec1..73525c0 100644
--- a/sound/usb/Kconfig
+++ b/sound/usb/Kconfig
@@ -48,6 +48,7 @@ config SND_USB_CAIAQ
 	    * Native Instruments Kore Controller
 	    * Native Instruments Kore Controller 2
 	    * Native Instruments Audio Kontrol 1
+	    * Native Instruments Audio 2 DJ
 	    * Native Instruments Audio 4 DJ
 	    * Native Instruments Audio 8 DJ
 	    * Native Instruments Guitar Rig Session I/O
diff --git a/sound/usb/caiaq/audio.c b/sound/usb/caiaq/audio.c
index 8f9b60c..121af06 100644
--- a/sound/usb/caiaq/audio.c
+++ b/sound/usb/caiaq/audio.c
@@ -646,6 +646,7 @@ int snd_usb_caiaq_audio_init(struct snd_usb_caiaqdev *dev)
 	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_GUITARRIGMOBILE):
 		dev->samplerates |= SNDRV_PCM_RATE_192000;
 		/* fall thru */
+	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO2DJ):
 	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO4DJ):
 	case USB_ID(USB_VID_NATIVEINSTRUMENTS, USB_PID_AUDIO8DJ):
 		dev->samplerates |= SNDRV_PCM_RATE_88200;
diff --git a/sound/usb/caiaq/device.c b/sound/usb/caiaq/device.c
index de38108..83e6c13 100644
--- a/sound/usb/caiaq/device.c
+++ b/sound/usb/caiaq/device.c
@@ -35,13 +35,14 @@
 #include "input.h"
 
 MODULE_AUTHOR("Daniel Mack <daniel@caiaq.de>");
-MODULE_DESCRIPTION("caiaq USB audio, version 1.3.18");
+MODULE_DESCRIPTION("caiaq USB audio, version 1.3.19");
 MODULE_LICENSE("GPL");
 MODULE_SUPPORTED_DEVICE("{{Native Instruments, RigKontrol2},"
 			 "{Native Instruments, RigKontrol3},"
 			 "{Native Instruments, Kore Controller},"
 			 "{Native Instruments, Kore Controller 2},"
 			 "{Native Instruments, Audio Kontrol 1},"
+			 "{Native Instruments, Audio 2 DJ},"
 			 "{Native Instruments, Audio 4 DJ},"
 			 "{Native Instruments, Audio 8 DJ},"
 			 "{Native Instruments, Session I/O},"
@@ -121,6 +122,11 @@ static struct usb_device_id snd_usb_id_table[] = {
 		.idVendor =     USB_VID_NATIVEINSTRUMENTS,
 		.idProduct =    USB_PID_AUDIO4DJ
 	},
+	{
+		.match_flags =  USB_DEVICE_ID_MATCH_DEVICE,
+		.idVendor =     USB_VID_NATIVEINSTRUMENTS,
+		.idProduct =    USB_PID_AUDIO2DJ
+	},
 	{ /* terminator */ }
 };
 
diff --git a/sound/usb/caiaq/device.h b/sound/usb/caiaq/device.h
index ece7351..44e3edf 100644
--- a/sound/usb/caiaq/device.h
+++ b/sound/usb/caiaq/device.h
@@ -10,6 +10,7 @@
 #define USB_PID_KORECONTROLLER	0x4711
 #define USB_PID_KORECONTROLLER2	0x4712
 #define USB_PID_AK1		0x0815
+#define USB_PID_AUDIO2DJ	0x041c
 #define USB_PID_AUDIO4DJ	0x0839
 #define USB_PID_AUDIO8DJ	0x1978
 #define USB_PID_SESSIONIO	0x1915
diff --git a/sound/usb/usbmixer.c b/sound/usb/usbmixer.c
index 4bd3a7a..ec9cdf9 100644
--- a/sound/usb/usbmixer.c
+++ b/sound/usb/usbmixer.c
@@ -990,20 +990,35 @@ static void build_feature_ctl(struct mixer_build *state, unsigned char *desc,
 		break;
 	}
 
-	/* quirk for UDA1321/N101 */
-	/* note that detection between firmware 2.1.1.7 (N101) and later 2.1.1.21 */
-	/* is not very clear from datasheets */
-	/* I hope that the min value is -15360 for newer firmware --jk */
+	/* volume control quirks */
 	switch (state->chip->usb_id) {
 	case USB_ID(0x0471, 0x0101):
 	case USB_ID(0x0471, 0x0104):
 	case USB_ID(0x0471, 0x0105):
 	case USB_ID(0x0672, 0x1041):
+	/* quirk for UDA1321/N101.
+	 * note that detection between firmware 2.1.1.7 (N101)
+	 * and later 2.1.1.21 is not very clear from datasheets.
+	 * I hope that the min value is -15360 for newer firmware --jk
+	 */
 		if (!strcmp(kctl->id.name, "PCM Playback Volume") &&
 		    cval->min == -15616) {
-			snd_printk(KERN_INFO "using volume control quirk for the UDA1321/N101 chip\n");
+			snd_printk(KERN_INFO
+				 "set volume quirk for UDA1321/N101 chip\n");
 			cval->max = -256;
 		}
+		break;
+
+	case USB_ID(0x046d, 0x09a4):
+		if (!strcmp(kctl->id.name, "Mic Capture Volume")) {
+			snd_printk(KERN_INFO
+				"set volume quirk for QuickCam E3500\n");
+			cval->min = 6080;
+			cval->max = 8768;
+			cval->res = 192;
+		}
+		break;
+
 	}
 
 	snd_printdd(KERN_INFO "[%d] FU [%s] ch = %d, val = %d/%d/%d\n",