diff options
author | Francois Romieu <romieu@fr.zoreil.com> | 2012-01-26 08:59:50 (GMT) |
---|---|---|
committer | Francois Romieu <romieu@fr.zoreil.com> | 2012-01-27 08:57:45 (GMT) |
commit | 209e5ac83b4d038ffb52cabc793f75031602a031 (patch) | |
tree | 1449fbab5a5ed43284f458a72a0dcaf983f11a77 | |
parent | 4512ff9f361a2786a18cb805d1f64b8d8719f121 (diff) | |
download | linux-209e5ac83b4d038ffb52cabc793f75031602a031.tar.xz |
r8169: remove rtl8169_reinit_task.
I see no good reason to keep both rtl8169_reinit_task and rtl8169_reset_task:
- rtl8169_reinit_task adds a software failure point which does relate to
any hardware state
- they handle hardware the same. Remember that rtl8169_reinit_task was
introduced in the 8169 only era to handle PCI errors way before the 8168
asked for pll and firmware ops and compare :
rtl8169_reinit_task | rtl8169_reset_task
----------------------------+--------------------------
rtl8169_wait_for_quiescence | rtl8169_hw_reset
rtl8169_update_counters | rtl8169_wait_for_quiescence
rtl8169_hw_reset | rtl_hw_start
rtl8169_rx_missed | rtl8169_check_link_status
rtl_pll_power_down |
rtl_request_firmware |
rtl8169_init_phy |
rtl_pll_power_up |
rtl_hw_start |
rtl8169_check_link_status |
Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
Cc: Hayes Wang <hayeswang@realtek.com>
-rw-r--r-- | drivers/net/ethernet/realtek/r8169.c | 34 |
1 files changed, 3 insertions, 31 deletions
diff --git a/drivers/net/ethernet/realtek/r8169.c b/drivers/net/ethernet/realtek/r8169.c index ca86e67..4f0856b 100644 --- a/drivers/net/ethernet/realtek/r8169.c +++ b/drivers/net/ethernet/realtek/r8169.c @@ -5353,34 +5353,6 @@ static void rtl8169_wait_for_quiescence(struct net_device *dev) napi_enable(&tp->napi); } -static void rtl8169_reinit_task(struct work_struct *work) -{ - struct rtl8169_private *tp = - container_of(work, struct rtl8169_private, task.work); - struct net_device *dev = tp->dev; - int ret; - - rtnl_lock(); - - if (!netif_running(dev)) - goto out_unlock; - - rtl8169_wait_for_quiescence(dev); - rtl8169_close(dev); - - ret = rtl8169_open(dev); - if (unlikely(ret < 0)) { - if (net_ratelimit()) - netif_err(tp, drv, dev, - "reinit failure (status = %d). Rescheduling\n", - ret); - rtl8169_schedule_work(dev, rtl8169_reinit_task); - } - -out_unlock: - rtnl_unlock(); -} - static void rtl8169_reset_task(struct work_struct *work) { struct rtl8169_private *tp = @@ -5616,7 +5588,7 @@ static void rtl8169_pcierr_interrupt(struct net_device *dev) rtl8169_hw_reset(tp); - rtl8169_schedule_work(dev, rtl8169_reinit_task); + rtl8169_schedule_work(dev, rtl8169_reset_task); } static void rtl8169_tx_interrupt(struct net_device *dev, @@ -5923,8 +5895,8 @@ static void rtl8169_down(struct net_device *dev) rtl8169_hw_reset(tp); /* * At this point device interrupts can not be enabled in any function, - * as netif_running is not true (rtl8169_interrupt, rtl8169_reset_task, - * rtl8169_reinit_task) and napi is disabled (rtl8169_poll). + * as netif_running is not true (rtl8169_interrupt, rtl8169_reset_task) + * and napi is disabled (rtl8169_poll). */ rtl8169_rx_missed(dev, ioaddr); |