m68k: remove the dead PCI code

This patch removes the no longer used m68k PCI code.

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

6 files changed, 7 insertions, 630 deletions

diff --git a/arch/m68k/Kconfig b/arch/m68k/Kconfig
index 2ec21f7..677c93a 100644
--- a/arch/m68k/Kconfig
+++ b/arch/m68k/Kconfig
@@ -122,10 +122,6 @@ config ATARI
 	  this kernel on an Atari, say Y here and browse the material
 	  available in <file:Documentation/m68k>; otherwise say N.
 
-config PCI
-	bool
-	help
-
 config MAC
 	bool "Macintosh support"
 	select MMU_MOTOROLA if MMU
diff --git a/arch/m68k/kernel/Makefile b/arch/m68k/kernel/Makefile
index 3a7f622..55d5d6b 100644
--- a/arch/m68k/kernel/Makefile
+++ b/arch/m68k/kernel/Makefile
@@ -14,5 +14,4 @@ obj-y	:= entry.o process.o traps.o ints.o signal.o ptrace.o module.o \
 
 devres-y = ../../../kernel/irq/devres.o
 
-obj-$(CONFIG_PCI)	+= bios32.o
 obj-y$(CONFIG_MMU_SUN3) += dma.o	# no, it's not a typo
diff --git a/arch/m68k/kernel/bios32.c b/arch/m68k/kernel/bios32.c
deleted file mode 100644
index 1c3b752..0000000
--- a/arch/m68k/kernel/bios32.c
+++ /dev/null
@@ -1,516 +0,0 @@
-/*
- * bios32.c - PCI BIOS functions for m68k systems.
- *
- * Written by Wout Klaren.
- *
- * Based on the DEC Alpha bios32.c by Dave Rusling and David Mosberger.
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-
-#if 0
-# define DBG_DEVS(args)		printk args
-#else
-# define DBG_DEVS(args)
-#endif
-
-#ifdef CONFIG_PCI
-
-/*
- * PCI support for Linux/m68k. Currently only the Hades is supported.
- *
- * The support for PCI bridges in the DEC Alpha version has
- * been removed in this version.
- */
-
-#include <linux/pci.h>
-#include <linux/slab.h>
-#include <linux/mm.h>
-
-#include <asm/io.h>
-#include <asm/pci.h>
-#include <asm/uaccess.h>
-
-#define KB		1024
-#define MB		(1024*KB)
-#define GB		(1024*MB)
-
-#define MAJOR_REV	0
-#define MINOR_REV	5
-
-/*
- * Align VAL to ALIGN, which must be a power of two.
- */
-
-#define ALIGN(val,align)	(((val) + ((align) - 1)) & ~((align) - 1))
-
-/*
- * Offsets relative to the I/O and memory base addresses from where resources
- * are allocated.
- */
-
-#define IO_ALLOC_OFFSET		0x00004000
-#define MEM_ALLOC_OFFSET	0x04000000
-
-/*
- * Declarations of hardware specific initialisation functions.
- */
-
-extern struct pci_bus_info *init_hades_pci(void);
-
-/*
- * Bus info structure of the PCI bus. A pointer to this structure is
- * put in the sysdata member of the pci_bus structure.
- */
-
-static struct pci_bus_info *bus_info;
-
-static int pci_modify = 1;		/* If set, layout the PCI bus ourself. */
-static int skip_vga;			/* If set do not modify base addresses
-					   of vga cards.*/
-static int disable_pci_burst;		/* If set do not allow PCI bursts. */
-
-static unsigned int io_base;
-static unsigned int mem_base;
-
-/*
- * static void disable_dev(struct pci_dev *dev)
- *
- * Disable PCI device DEV so that it does not respond to I/O or memory
- * accesses.
- *
- * Parameters:
- *
- * dev	- device to disable.
- */
-
-static void __init disable_dev(struct pci_dev *dev)
-{
-	unsigned short cmd;
-
-	if (((dev->class >> 8 == PCI_CLASS_NOT_DEFINED_VGA) ||
-	     (dev->class >> 8 == PCI_CLASS_DISPLAY_VGA) ||
-	     (dev->class >> 8 == PCI_CLASS_DISPLAY_XGA)) && skip_vga)
-		return;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-
-	cmd &= (~PCI_COMMAND_IO & ~PCI_COMMAND_MEMORY & ~PCI_COMMAND_MASTER);
-	pci_write_config_word(dev, PCI_COMMAND, cmd);
-}
-
-/*
- * static void layout_dev(struct pci_dev *dev)
- *
- * Layout memory and I/O for a device.
- *
- * Parameters:
- *
- * device	- device to layout memory and I/O for.
- */
-
-static void __init layout_dev(struct pci_dev *dev)
-{
-	unsigned short cmd;
-	unsigned int base, mask, size, reg;
-	unsigned int alignto;
-	int i;
-
-	/*
-	 * Skip video cards if requested.
-	 */
-
-	if (((dev->class >> 8 == PCI_CLASS_NOT_DEFINED_VGA) ||
-	     (dev->class >> 8 == PCI_CLASS_DISPLAY_VGA) ||
-	     (dev->class >> 8 == PCI_CLASS_DISPLAY_XGA)) && skip_vga)
-		return;
-
-	pci_read_config_word(dev, PCI_COMMAND, &cmd);
-
-	for (reg = PCI_BASE_ADDRESS_0, i = 0; reg <= PCI_BASE_ADDRESS_5; reg += 4, i++)
-	{
-		/*
-		 * Figure out how much space and of what type this
-		 * device wants.
-		 */
-
-		pci_write_config_dword(dev, reg, 0xffffffff);
-		pci_read_config_dword(dev, reg, &base);
-
-		if (!base)
-		{
-			/* this base-address register is unused */
-			dev->resource[i].start = 0;
-			dev->resource[i].end = 0;
-			dev->resource[i].flags = 0;
-			continue;
-		}
-
-		/*
-		 * We've read the base address register back after
-		 * writing all ones and so now we must decode it.
-		 */
-
-		if (base & PCI_BASE_ADDRESS_SPACE_IO)
-		{
-			/*
-			 * I/O space base address register.
-			 */
-
-			cmd |= PCI_COMMAND_IO;
-
-			base &= PCI_BASE_ADDRESS_IO_MASK;
-			mask = (~base << 1) | 0x1;
-			size = (mask & base) & 0xffffffff;
-
-			/*
-			 * Align to multiple of size of minimum base.
-			 */
-
-			alignto = max_t(unsigned int, 0x040, size);
-			base = ALIGN(io_base, alignto);
-			io_base = base + size;
-			pci_write_config_dword(dev, reg, base | PCI_BASE_ADDRESS_SPACE_IO);
-
-			dev->resource[i].start = base;
-			dev->resource[i].end = dev->resource[i].start + size - 1;
-			dev->resource[i].flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
-
-			DBG_DEVS(("layout_dev: IO address: %lX\n", base));
-		}
-		else
-		{
-			unsigned int type;
-
-			/*
-			 * Memory space base address register.
-			 */
-
-			cmd |= PCI_COMMAND_MEMORY;
-			type = base & PCI_BASE_ADDRESS_MEM_TYPE_MASK;
-			base &= PCI_BASE_ADDRESS_MEM_MASK;
-			mask = (~base << 1) | 0x1;
-			size = (mask & base) & 0xffffffff;
-			switch (type)
-			{
-			case PCI_BASE_ADDRESS_MEM_TYPE_32:
-			case PCI_BASE_ADDRESS_MEM_TYPE_64:
-				break;
-
-			case PCI_BASE_ADDRESS_MEM_TYPE_1M:
-				printk("bios32 WARNING: slot %d, function %d "
-				       "requests memory below 1MB---don't "
-				       "know how to do that.\n",
-				       PCI_SLOT(dev->devfn),
-				       PCI_FUNC(dev->devfn));
-				continue;
-			}
-
-			/*
-			 * Align to multiple of size of minimum base.
-			 */
-
-			alignto = max_t(unsigned int, 0x1000, size);
-			base = ALIGN(mem_base, alignto);
-			mem_base = base + size;
-			pci_write_config_dword(dev, reg, base);
-
-			dev->resource[i].start = base;
-			dev->resource[i].end = dev->resource[i].start + size - 1;
-			dev->resource[i].flags = IORESOURCE_MEM;
-
-			if (type == PCI_BASE_ADDRESS_MEM_TYPE_64)
-			{
-				/*
-				 * 64-bit address, set the highest 32 bits
-				 * to zero.
-				 */
-
-				reg += 4;
-				pci_write_config_dword(dev, reg, 0);
-
-				i++;
-				dev->resource[i].start = 0;
-				dev->resource[i].end = 0;
-				dev->resource[i].flags = 0;
-			}
-		}
-	}
-
-	/*
-	 * Enable device:
-	 */
-
-	if (dev->class >> 8 == PCI_CLASS_NOT_DEFINED ||
-	    dev->class >> 8 == PCI_CLASS_NOT_DEFINED_VGA ||
-	    dev->class >> 8 == PCI_CLASS_DISPLAY_VGA ||
-	    dev->class >> 8 == PCI_CLASS_DISPLAY_XGA)
-	{
-		/*
-		 * All of these (may) have I/O scattered all around
-		 * and may not use i/o-base address registers at all.
-		 * So we just have to always enable I/O to these
-		 * devices.
-		 */
-		cmd |= PCI_COMMAND_IO;
-	}
-
-	pci_write_config_word(dev, PCI_COMMAND, cmd | PCI_COMMAND_MASTER);
-
-	pci_write_config_byte(dev, PCI_LATENCY_TIMER, (disable_pci_burst) ? 0 : 32);
-
-	if (bus_info != NULL)
-		bus_info->conf_device(dev);	/* Machine dependent configuration. */
-
-	DBG_DEVS(("layout_dev: bus %d  slot 0x%x  VID 0x%x  DID 0x%x  class 0x%x\n",
-		  dev->bus->number, PCI_SLOT(dev->devfn), dev->vendor, dev->device, dev->class));
-}
-
-/*
- * static void layout_bus(struct pci_bus *bus)
- *
- * Layout memory and I/O for all devices on the given bus.
- *
- * Parameters:
- *
- * bus	- bus.
- */
-
-static void __init layout_bus(struct pci_bus *bus)
-{
-	unsigned int bio, bmem;
-	struct pci_dev *dev;
-
-	DBG_DEVS(("layout_bus: starting bus %d\n", bus->number));
-
-	if (!bus->devices && !bus->children)
-		return;
-
-	/*
-	 * Align the current bases on appropriate boundaries (4K for
-	 * IO and 1MB for memory).
-	 */
-
-	bio = io_base = ALIGN(io_base, 4*KB);
-	bmem = mem_base = ALIGN(mem_base, 1*MB);
-
-	/*
-	 * PCI devices might have been setup by a PCI BIOS emulation
-	 * running under TOS. In these cases there is a
-	 * window during which two devices may have an overlapping
-	 * address range. To avoid this causing trouble, we first
-	 * turn off the I/O and memory address decoders for all PCI
-	 * devices.  They'll be re-enabled only once all address
-	 * decoders are programmed consistently.
-	 */
-
-	DBG_DEVS(("layout_bus: disable_dev for bus %d\n", bus->number));
-
-	for (dev = bus->devices; dev; dev = dev->sibling)
-	{
-		if ((dev->class >> 16 != PCI_BASE_CLASS_BRIDGE) ||
-		    (dev->class >> 8 == PCI_CLASS_BRIDGE_PCMCIA))
-			disable_dev(dev);
-	}
-
-	/*
-	 * Allocate space to each device:
-	 */
-
-	DBG_DEVS(("layout_bus: starting bus %d devices\n", bus->number));
-
-	for (dev = bus->devices; dev; dev = dev->sibling)
-	{
-		if ((dev->class >> 16 != PCI_BASE_CLASS_BRIDGE) ||
-		    (dev->class >> 8 == PCI_CLASS_BRIDGE_PCMCIA))
-			layout_dev(dev);
-	}
-
-	DBG_DEVS(("layout_bus: bus %d finished\n", bus->number));
-}
-
-/*
- * static void pcibios_fixup(void)
- *
- * Layout memory and I/O of all devices on the PCI bus if 'pci_modify' is
- * true. This might be necessary because not every m68k machine with a PCI
- * bus has a PCI BIOS. This function should be called right after
- * pci_scan_bus() in pcibios_init().
- */
-
-static void __init pcibios_fixup(void)
-{
-	if (pci_modify)
-	{
-		/*
-		 * Set base addresses for allocation of I/O and memory space.
-		 */
-
-		io_base = bus_info->io_space.start + IO_ALLOC_OFFSET;
-		mem_base = bus_info->mem_space.start + MEM_ALLOC_OFFSET;
-
-		/*
-		 * Scan the tree, allocating PCI memory and I/O space.
-		 */
-
-		layout_bus(pci_bus_b(pci_root.next));
-	}
-
-	/*
-	 * Fix interrupt assignments, etc.
-	 */
-
-	bus_info->fixup(pci_modify);
-}
-
-/*
- * static void pcibios_claim_resources(struct pci_bus *bus)
- *
- * Claim all resources that are assigned to devices on the given bus.
- *
- * Parameters:
- *
- * bus	- bus.
- */
-
-static void __init pcibios_claim_resources(struct pci_bus *bus)
-{
-	struct pci_dev *dev;
-	int i;
-
-	while (bus)
-	{
-		for (dev = bus->devices; (dev != NULL); dev = dev->sibling)
-		{
-			for (i = 0; i < PCI_NUM_RESOURCES; i++)
-			{
-				struct resource *r = &dev->resource[i];
-				struct resource *pr;
-				struct pci_bus_info *bus_info = (struct pci_bus_info *) dev->sysdata;
-
-				if ((r->start == 0) || (r->parent != NULL))
-					continue;
-#if 1
-				if (r->flags & IORESOURCE_IO)
-					pr = &bus_info->io_space;
-				else
-					pr = &bus_info->mem_space;
-#else
-				if (r->flags & IORESOURCE_IO)
-					pr = &ioport_resource;
-				else
-					pr = &iomem_resource;
-#endif
-				if (request_resource(pr, r) < 0)
-				{
-					printk(KERN_ERR "PCI: Address space collision on region %d of device %s\n", i, dev->name);
-				}
-			}
-		}
-
-		if (bus->children)
-			pcibios_claim_resources(bus->children);
-
-		bus = bus->next;
-	}
-}
-
-/*
- * int pcibios_assign_resource(struct pci_dev *dev, int i)
- *
- * Assign a new address to a PCI resource.
- *
- * Parameters:
- *
- * dev	- device.
- * i	- resource.
- *
- * Result: 0 if successful.
- */
-
-int __init pcibios_assign_resource(struct pci_dev *dev, int i)
-{
-	struct resource *r = &dev->resource[i];
-	struct resource *pr = pci_find_parent_resource(dev, r);
-	unsigned long size = r->end + 1;
-
-	if (!pr)
-		return -EINVAL;
-
-	if (r->flags & IORESOURCE_IO)
-	{
-		if (size > 0x100)
-			return -EFBIG;
-
-		if (allocate_resource(pr, r, size, bus_info->io_space.start +
-				      IO_ALLOC_OFFSET,  bus_info->io_space.end, 1024))
-			return -EBUSY;
-	}
-	else
-	{
-		if (allocate_resource(pr, r, size, bus_info->mem_space.start +
-				      MEM_ALLOC_OFFSET, bus_info->mem_space.end, size))
-			return -EBUSY;
-	}
-
-	if (i < 6)
-		pci_write_config_dword(dev, PCI_BASE_ADDRESS_0 + 4 * i, r->start);
-
-	return 0;
-}
-
-void __init pcibios_fixup_bus(struct pci_bus *bus)
-{
-	struct pci_dev *dev;
-	void *sysdata;
-
-	sysdata = (bus->parent) ? bus->parent->sysdata : bus->sysdata;
-
-	for (dev = bus->devices; (dev != NULL); dev = dev->sibling)
-		dev->sysdata = sysdata;
-}
-
-void __init pcibios_init(void)
-{
-	printk("Linux/m68k PCI BIOS32 revision %x.%02x\n", MAJOR_REV, MINOR_REV);
-
-	bus_info = NULL;
-
-/* Hades code was:
-	if (MACH_IS_HADES)
-		bus_info = init_hades_pci();
-*/
-
-	if (bus_info != NULL)
-	{
-		printk("PCI: Probing PCI hardware\n");
-		pci_scan_bus(0, bus_info->m68k_pci_ops, bus_info);
-		pcibios_fixup();
-		pcibios_claim_resources(pci_root);
-	}
-	else
-		printk("PCI: No PCI bus detected\n");
-}
-
-char * __init pcibios_setup(char *str)
-{
-	if (!strcmp(str, "nomodify"))
-	{
-		pci_modify = 0;
-		return NULL;
-	}
-	else if (!strcmp(str, "skipvga"))
-	{
-		skip_vga = 1;
-		return NULL;
-	}
-	else if (!strcmp(str, "noburst"))
-	{
-		disable_pci_burst = 1;
-		return NULL;
-	}
-
-	return str;
-}
-#endif /* CONFIG_PCI */
diff --git a/include/asm-m68k/dma.h b/include/asm-m68k/dma.h
index d0c9e61..4240fbc 100644
--- a/include/asm-m68k/dma.h
+++ b/include/asm-m68k/dma.h
@@ -11,10 +11,6 @@
 extern int request_dma(unsigned int dmanr, const char * device_id);	/* reserve a DMA channel */
 extern void free_dma(unsigned int dmanr);	/* release it again */
 
-#ifdef CONFIG_PCI
-extern int isa_dma_bridge_buggy;
-#else
 #define isa_dma_bridge_buggy    (0)
-#endif
 
 #endif /* _M68K_DMA_H */
diff --git a/include/asm-m68k/io.h b/include/asm-m68k/io.h
index 657187f..9e673e3 100644
--- a/include/asm-m68k/io.h
+++ b/include/asm-m68k/io.h
@@ -7,15 +7,12 @@
  *            - added skeleton for GG-II and Amiga PCMCIA
  * 2/3/01 RZ: - moved a few more defs into raw_io.h
  *
- * inX/outX/readX/writeX should not be used by any driver unless it does
- * ISA or PCI access. Other drivers should use function defined in raw_io.h
+ * inX/outX should not be used by any driver unless it does
+ * ISA access. Other drivers should use function defined in raw_io.h
  * or define its own macros on top of these.
  *
- *    inX(),outX()              are for PCI and ISA I/O
- *    readX(),writeX()          are for PCI memory
+ *    inX(),outX()              are for ISA I/O
  *    isa_readX(),isa_writeX()  are for ISA memory
- *
- * moved mem{cpy,set}_*io inside CONFIG_PCI
  */
 
 #ifndef _IO_H
@@ -256,10 +253,7 @@ static inline void isa_delay(void)
        (ISA_SEX ? raw_outsl(isa_itl(port), (u32 *)(buf), (nr)) :  \
                   raw_outsw_swapw(isa_itw(port), (u16 *)(buf), (nr)<<1))
 
-#endif  /* CONFIG_ISA */
-
 
-#if defined(CONFIG_ISA) && !defined(CONFIG_PCI)
 #define inb     isa_inb
 #define inb_p   isa_inb_p
 #define outb    isa_outb
@@ -282,55 +276,9 @@ static inline void isa_delay(void)
 #define readw   isa_readw
 #define writeb  isa_writeb
 #define writew  isa_writew
-#endif /* CONFIG_ISA */
-
-#if defined(CONFIG_PCI)
-
-#define readl(addr)      in_le32(addr)
-#define writel(val,addr) out_le32((addr),(val))
-
-/* those can be defined for both ISA and PCI - it won't work though */
-#define readb(addr)       in_8(addr)
-#define readw(addr)       in_le16(addr)
-#define writeb(val,addr)  out_8((addr),(val))
-#define writew(val,addr)  out_le16((addr),(val))
 
-#define readb_relaxed(addr) readb(addr)
-#define readw_relaxed(addr) readw(addr)
-#define readl_relaxed(addr) readl(addr)
+#else  /* CONFIG_ISA */
 
-#ifndef CONFIG_ISA
-#define inb(port)      in_8(port)
-#define outb(val,port) out_8((port),(val))
-#define inw(port)      in_le16(port)
-#define outw(val,port) out_le16((port),(val))
-#define inl(port)      in_le32(port)
-#define outl(val,port) out_le32((port),(val))
-
-#else
-/*
- * kernel with both ISA and PCI compiled in, those have
- * conflicting defs for in/out. Simply consider port < 1024
- * ISA and everything else PCI. read,write not defined
- * in this case
- */
-#define inb(port) ((port)<1024 ? isa_inb(port) : in_8(port))
-#define inb_p(port) ((port)<1024 ? isa_inb_p(port) : in_8(port))
-#define inw(port) ((port)<1024 ? isa_inw(port) : in_le16(port))
-#define inw_p(port) ((port)<1024 ? isa_inw_p(port) : in_le16(port))
-#define inl(port) ((port)<1024 ? isa_inl(port) : in_le32(port))
-#define inl_p(port) ((port)<1024 ? isa_inl_p(port) : in_le32(port))
-
-#define outb(val,port) ((port)<1024 ? isa_outb((val),(port)) : out_8((port),(val)))
-#define outb_p(val,port) ((port)<1024 ? isa_outb_p((val),(port)) : out_8((port),(val)))
-#define outw(val,port) ((port)<1024 ? isa_outw((val),(port)) : out_le16((port),(val)))
-#define outw_p(val,port) ((port)<1024 ? isa_outw_p((val),(port)) : out_le16((port),(val)))
-#define outl(val,port) ((port)<1024 ? isa_outl((val),(port)) : out_le32((port),(val)))
-#define outl_p(val,port) ((port)<1024 ? isa_outl_p((val),(port)) : out_le32((port),(val)))
-#endif
-#endif /* CONFIG_PCI */
-
-#if !defined(CONFIG_ISA) && !defined(CONFIG_PCI)
 /*
  * We need to define dummy functions for GENERIC_IOMAP support.
  */
@@ -357,11 +305,11 @@ static inline void isa_delay(void)
 #define writeb(val,addr) out_8((addr),(val))
 #define readw(addr)      in_le16(addr)
 #define writew(val,addr) out_le16((addr),(val))
-#endif
-#if !defined(CONFIG_PCI)
+
+#endif /* CONFIG_ISA */
+
 #define readl(addr)      in_le32(addr)
 #define writel(val,addr) out_le32((addr),(val))
-#endif
 
 #define mmiowb()
 
diff --git a/include/asm-m68k/pci.h b/include/asm-m68k/pci.h
index d43febb..4ad0aea 100644
--- a/include/asm-m68k/pci.h
+++ b/include/asm-m68k/pci.h
@@ -1,54 +1,8 @@
 #ifndef _ASM_M68K_PCI_H
 #define _ASM_M68K_PCI_H
 
-/*
- * asm-m68k/pci_m68k.h - m68k specific PCI declarations.
- *
- * Written by Wout Klaren.
- */
-
-#include <asm/scatterlist.h>
 #include <asm-generic/pci-dma-compat.h>
 
-struct pci_ops;
-
-/*
- * Structure with hardware dependent information and functions of the
- * PCI bus.
- */
-
-struct pci_bus_info
-{
-	/*
-	 * Resources of the PCI bus.
-	 */
-
-	struct resource mem_space;
-	struct resource io_space;
-
-	/*
-	 * System dependent functions.
-	 */
-
-	struct pci_ops *m68k_pci_ops;
-
-	void (*fixup)(int pci_modify);
-	void (*conf_device)(struct pci_dev *dev);
-};
-
-#define pcibios_assign_all_busses()	0
-#define pcibios_scan_all_fns(a, b)	0
-
-static inline void pcibios_set_master(struct pci_dev *dev)
-{
-	/* No special bus mastering setup handling */
-}
-
-static inline void pcibios_penalize_isa_irq(int irq, int active)
-{
-	/* We don't do dynamic PCI IRQ allocation */
-}
-
 /* The PCI address space does equal the physical memory
  * address space.  The networking and block device layers use
  * this boolean for bounce buffer decisions.